blob: 2e3dd34e21a554298a029dc1bdf563c26f19ea59 [file] [log] [blame]
/dts-v1/;
/include/ "kirkwood.dtsi"
/include/ "kirkwood-6281.dtsi"
/ {
model = "Seagate FreeAgent Dockstar";
compatible = "seagate,dockstar", "marvell,kirkwood-88f6281", "marvell,kirkwood";
memory {
device_type = "memory";
reg = <0x00000000 0x8000000>;
};
chosen {
bootargs = "console=ttyS0,115200n8 earlyprintk root=/dev/sda1 rootdelay=10";
};
ocp@f1000000 {
pinctrl: pinctrl@10000 {
pinctrl-0 = < &pmx_usb_power_enable
&pmx_led_green &pmx_led_orange >;
pinctrl-names = "default";
pmx_usb_power_enable: pmx-usb-power-enable {
marvell,pins = "mpp29";
marvell,function = "gpio";
};
pmx_led_green: pmx-led-green {
marvell,pins = "mpp46";
marvell,function = "gpio";
};
pmx_led_orange: pmx-led-orange {
marvell,pins = "mpp47";
marvell,function = "gpio";
};
};
serial@12000 {
clock-frequency = <200000000>;
status = "ok";
};
nand@3000000 {
status = "okay";
partition@0 {
label = "u-boot";
reg = <0x0000000 0x100000>;
read-only;
};
partition@100000 {
label = "uImage";
reg = <0x0100000 0x400000>;
};
partition@500000 {
label = "data";
reg = <0x0500000 0xfb00000>;
};
};
};
gpio-leds {
compatible = "gpio-leds";
health {
label = "status:green:health";
gpios = <&gpio1 14 1>;
linux,default-trigger = "default-on";
};
fault {
label = "status:orange:fault";
gpios = <&gpio1 15 1>;
};
};
regulators {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <0>;
usb_power: regulator@1 {
compatible = "regulator-fixed";
reg = <1>;
regulator-name = "USB Power";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
enable-active-high;
regulator-always-on;
regulator-boot-on;
gpio = <&gpio0 29 0>;
};
};
};