pinctrl: at91: choose appropriate handler for level interrupts
The current implementation handle both edge and level interrupts with the
'handle_simple_irq' handler.
Level interrupts are active as long as the pin stays at the configured
level (low or high). In this case we have to use 'handle_level_irq' which
mask the interrupt until the handle has treated it.
Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com>
Tested-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
diff --git a/drivers/pinctrl/pinctrl-at91.c b/drivers/pinctrl/pinctrl-at91.c
index b90a3a0..7cce066 100644
--- a/drivers/pinctrl/pinctrl-at91.c
+++ b/drivers/pinctrl/pinctrl-at91.c
@@ -1241,18 +1241,22 @@
switch (type) {
case IRQ_TYPE_EDGE_RISING:
+ irq_set_handler(d->irq, handle_simple_irq);
writel_relaxed(mask, pio + PIO_ESR);
writel_relaxed(mask, pio + PIO_REHLSR);
break;
case IRQ_TYPE_EDGE_FALLING:
+ irq_set_handler(d->irq, handle_simple_irq);
writel_relaxed(mask, pio + PIO_ESR);
writel_relaxed(mask, pio + PIO_FELLSR);
break;
case IRQ_TYPE_LEVEL_LOW:
+ irq_set_handler(d->irq, handle_level_irq);
writel_relaxed(mask, pio + PIO_LSR);
writel_relaxed(mask, pio + PIO_FELLSR);
break;
case IRQ_TYPE_LEVEL_HIGH:
+ irq_set_handler(d->irq, handle_level_irq);
writel_relaxed(mask, pio + PIO_LSR);
writel_relaxed(mask, pio + PIO_REHLSR);
break;
@@ -1261,6 +1265,7 @@
* disable additional interrupt modes:
* fall back to default behavior
*/
+ irq_set_handler(d->irq, handle_simple_irq);
writel_relaxed(mask, pio + PIO_AIMDR);
return 0;
case IRQ_TYPE_NONE:
@@ -1402,6 +1407,8 @@
irq_hw_number_t hw)
{
struct at91_gpio_chip *at91_gpio = h->host_data;
+ void __iomem *pio = at91_gpio->regbase;
+ u32 mask = 1 << hw;
irq_set_lockdep_class(virq, &gpio_lock_class);
@@ -1409,8 +1416,13 @@
* Can use the "simple" and not "edge" handler since it's
* shorter, and the AIC handles interrupts sanely.
*/
- irq_set_chip_and_handler(virq, &gpio_irqchip,
- handle_simple_irq);
+ irq_set_chip(virq, &gpio_irqchip);
+ if ((at91_gpio->ops == &at91sam9x5_ops) &&
+ (readl_relaxed(pio + PIO_AIMMR) & mask) &&
+ (readl_relaxed(pio + PIO_ELSR) & mask))
+ irq_set_handler(virq, handle_level_irq);
+ else
+ irq_set_handler(virq, handle_simple_irq);
set_irq_flags(virq, IRQF_VALID);
irq_set_chip_data(virq, at91_gpio);