pcmcia: do not use io_req_t after call to pcmcia_request_io()
After pcmcia_request_io(), do not make use of the values stored in
io_req_t, but instead use those found in struct pcmcia_device->resource[].
CC: netdev@vger.kernel.org
CC: linux-wireless@vger.kernel.org
CC: linux-ide@vger.kernel.org
CC: linux-usb@vger.kernel.org
CC: laforge@gnumonks.org
CC: linux-mtd@lists.infradead.org
CC: alsa-devel@alsa-project.org
CC: linux-serial@vger.kernel.org
Acked-by: Marcel Holtmann <marcel@holtmann.org> (for drivers/bluetooth/)
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
diff --git a/drivers/net/pcmcia/smc91c92_cs.c b/drivers/net/pcmcia/smc91c92_cs.c
index 88f503a..1b0b3230 100644
--- a/drivers/net/pcmcia/smc91c92_cs.c
+++ b/drivers/net/pcmcia/smc91c92_cs.c
@@ -457,7 +457,7 @@
if (pcmcia_loop_config(link, mhz_mfc_config_check, NULL))
return -ENODEV;
- dev->base_addr = link->io.BasePort1;
+ dev->base_addr = link->resource[0]->start;
/* Allocate a memory window, for accessing the ISR */
req.Attributes = WIN_DATA_WIDTH_8|WIN_MEMORY_TYPE_AM|WIN_ENABLE;
@@ -545,7 +545,7 @@
struct net_device *dev = link->priv;
struct smc_private *smc = netdev_priv(dev);
unsigned int ioaddr = dev->base_addr;
- unsigned int iouart = link->io.BasePort2;
+ unsigned int iouart = link->resource[1]->start;
/* Set UART base address and force map with COR bit 1 */
writeb(iouart & 0xff, smc->base + MOT_UART + CISREG_IOBASE_0);
@@ -614,7 +614,7 @@
link->io.NumPorts1 = 16;
i = pcmcia_loop_config(link, smc_configcheck, NULL);
if (!i)
- dev->base_addr = link->io.BasePort1;
+ dev->base_addr = link->resource[0]->start;
return i;
}
@@ -666,7 +666,7 @@
link->io.NumPorts2 = 0;
i = pcmcia_request_io(link, &link->io);
}
- dev->base_addr = link->io.BasePort1 + 0x10;
+ dev->base_addr = link->resource[0]->start + 0x10;
return i;
}
@@ -683,7 +683,7 @@
/* Download the Seven of Diamonds firmware */
for (i = 0; i < fw->size; i++) {
- outb(fw->data[i], link->io.BasePort1 + 2);
+ outb(fw->data[i], link->resource[0]->start + 2);
udelay(50);
}
release_firmware(fw);
@@ -725,12 +725,12 @@
return rc;
} else if (manfid == MANFID_OSITECH) {
/* Make sure both functions are powered up */
- set_bits(0x300, link->io.BasePort1 + OSITECH_AUI_PWR);
+ set_bits(0x300, link->resource[0]->start + OSITECH_AUI_PWR);
/* Now, turn on the interrupt for both card functions */
- set_bits(0x300, link->io.BasePort1 + OSITECH_RESET_ISR);
+ set_bits(0x300, link->resource[0]->start + OSITECH_RESET_ISR);
dev_dbg(&link->dev, "AUI/PWR: %4.4x RESET/ISR: %4.4x\n",
- inw(link->io.BasePort1 + OSITECH_AUI_PWR),
- inw(link->io.BasePort1 + OSITECH_RESET_ISR));
+ inw(link->resource[0]->start + OSITECH_AUI_PWR),
+ inw(link->resource[0]->start + OSITECH_RESET_ISR));
}
return 0;
}