pcmcia: do not use io_req_t after call to pcmcia_request_io()
After pcmcia_request_io(), do not make use of the values stored in
io_req_t, but instead use those found in struct pcmcia_device->resource[].
CC: netdev@vger.kernel.org
CC: linux-wireless@vger.kernel.org
CC: linux-ide@vger.kernel.org
CC: linux-usb@vger.kernel.org
CC: laforge@gnumonks.org
CC: linux-mtd@lists.infradead.org
CC: alsa-devel@alsa-project.org
CC: linux-serial@vger.kernel.org
Acked-by: Marcel Holtmann <marcel@holtmann.org> (for drivers/bluetooth/)
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
diff --git a/drivers/serial/serial_cs.c b/drivers/serial/serial_cs.c
index 2be8b10..fe7adcd 100644
--- a/drivers/serial/serial_cs.c
+++ b/drivers/serial/serial_cs.c
@@ -463,13 +463,13 @@
/* If the card is already configured, look up the port and irq */
if (link->function_config) {
unsigned int port = 0;
- if ((link->io.BasePort2 != 0) &&
- (link->io.NumPorts2 == 8)) {
- port = link->io.BasePort2;
+ if ((link->resource[1]->end != 0) &&
+ (resource_size(link->resource[1]) == 8)) {
+ port = link->resource[1]->end;
info->slave = 1;
} else if ((info->manfid == MANFID_OSITECH) &&
- (link->io.NumPorts1 == 0x40)) {
- port = link->io.BasePort1 + 0x28;
+ (resource_size(link->resource[0]) == 0x40)) {
+ port = link->resource[0]->start + 0x28;
info->slave = 1;
}
if (info->slave) {
@@ -507,7 +507,7 @@
i = pcmcia_request_configuration(link, &link->conf);
if (i != 0)
return -1;
- return setup_serial(link, info, link->io.BasePort1, link->irq);
+ return setup_serial(link, info, link->resource[0]->start, link->irq);
}
static int multi_config_check(struct pcmcia_device *p_dev,
@@ -524,7 +524,7 @@
p_dev->io.BasePort1 = cf->io.win[0].base;
p_dev->io.IOAddrLines = cf->io.flags & CISTPL_IO_LINES_MASK;
if (!pcmcia_request_io(p_dev, &p_dev->io)) {
- *base2 = p_dev->io.BasePort1 + 8;
+ *base2 = p_dev->resource[0]->start + 8;
return 0;
}
}
@@ -544,7 +544,7 @@
p_dev->io.BasePort2 = cf->io.win[1].base;
p_dev->io.IOAddrLines = cf->io.flags & CISTPL_IO_LINES_MASK;
if (!pcmcia_request_io(p_dev, &p_dev->io)) {
- *base2 = p_dev->io.BasePort2;
+ *base2 = p_dev->resource[1]->start;
return 0;
}
}
@@ -596,9 +596,9 @@
link->conf.ConfigIndex == 3) {
err = setup_serial(link, info, base2,
link->irq);
- base2 = link->io.BasePort1;
+ base2 = link->resource[0]->start;;
} else {
- err = setup_serial(link, info, link->io.BasePort1,
+ err = setup_serial(link, info, link->resource[0]->start,
link->irq);
}
info->c950ctrl = base2;
@@ -613,7 +613,7 @@
return 0;
}
- setup_serial(link, info, link->io.BasePort1, link->irq);
+ setup_serial(link, info, link->resource[0]->start, link->irq);
for (i = 0; i < info->multi - 1; i++)
setup_serial(link, info, base2 + (8 * i),
link->irq);