omap: move detection of NAND CS to common-board-devices
and reduce amount of copy/paste
Signed-off-by: Mike Rapoport <mike@compulab.co.il>
CC: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Tony Lindgren <tony@atomide.com>
diff --git a/arch/arm/mach-omap2/board-omap3touchbook.c b/arch/arm/mach-omap2/board-omap3touchbook.c
index 0a9b329..d770802 100644
--- a/arch/arm/mach-omap2/board-omap3touchbook.c
+++ b/arch/arm/mach-omap2/board-omap3touchbook.c
@@ -96,15 +96,6 @@
},
};
-static struct omap_nand_platform_data omap3touchbook_nand_data = {
- .options = NAND_BUSWIDTH_16,
- .parts = omap3touchbook_nand_partitions,
- .nr_parts = ARRAY_SIZE(omap3touchbook_nand_partitions),
- .dma_channel = -1, /* disable DMA in OMAP NAND driver */
- .nand_setup = NULL,
- .dev_ready = NULL,
-};
-
#include "sdram-micron-mt46h32m32lf-6.h"
static struct omap2_hsmmc_info mmc[] = {
@@ -396,39 +387,6 @@
&keys_gpio,
};
-static void __init omap3touchbook_flash_init(void)
-{
- u8 cs = 0;
- u8 nandcs = GPMC_CS_NUM + 1;
-
- /* find out the chip-select on which NAND exists */
- while (cs < GPMC_CS_NUM) {
- u32 ret = 0;
- ret = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG1);
-
- if ((ret & 0xC00) == 0x800) {
- printk(KERN_INFO "Found NAND on CS%d\n", cs);
- if (nandcs > GPMC_CS_NUM)
- nandcs = cs;
- }
- cs++;
- }
-
- if (nandcs > GPMC_CS_NUM) {
- printk(KERN_INFO "NAND: Unable to find configuration "
- "in GPMC\n ");
- return;
- }
-
- if (nandcs < GPMC_CS_NUM) {
- omap3touchbook_nand_data.cs = nandcs;
-
- printk(KERN_INFO "Registering NAND on CS%d\n", nandcs);
- if (gpmc_nand_init(&omap3touchbook_nand_data) < 0)
- printk(KERN_ERR "Unable to register NAND device\n");
- }
-}
-
static const struct usbhs_omap_board_data usbhs_bdata __initconst = {
.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
@@ -491,7 +449,8 @@
omap_ads7846_init(4, OMAP3_TS_GPIO, 310, &ads7846_pdata);
usb_musb_init(&musb_board_data);
usbhs_init(&usbhs_bdata);
- omap3touchbook_flash_init();
+ omap_nand_flash_init(NAND_BUSWIDTH_16, omap3touchbook_nand_partitions,
+ ARRAY_SIZE(omap3touchbook_nand_partitions));
/* Ensure SDRC pins are mux'd for self-refresh */
omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT);