usb: isp1760: Move PORT1 configuration to core code
Configuring the mode of operation of port 1 doesn't belong to the HCD
code, as it's related to the soon to come UDC support. Move the
configuration to core code.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
diff --git a/drivers/usb/host/isp1760-core.c b/drivers/usb/host/isp1760-core.c
index e840a1d..1cba3e0 100644
--- a/drivers/usb/host/isp1760-core.c
+++ b/drivers/usb/host/isp1760-core.c
@@ -67,6 +67,14 @@
isp1760_write32(isp->regs, HC_HW_MODE_CTRL, hwmode);
isp1760_write32(isp->regs, HC_HW_MODE_CTRL, hwmode);
+ /*
+ * PORT 1 Control register of the ISP1760 is the OTG control register on
+ * ISP1761. Since there is no OTG or device controller support in this
+ * driver, we use port 1 as a "normal" USB host port on both chips.
+ */
+ isp1760_write32(isp->regs, HC_PORT1_CTRL, PORT1_POWER | PORT1_INIT2);
+ usleep_range(10000, 11000);
+
dev_info(isp->dev, "bus width: %u, oc: %s\n",
isp->devflags & ISP1760_FLAG_BUS_WIDTH_16 ? 16 : 32,
isp->devflags & ISP1760_FLAG_ANALOG_OC ? "analog" : "digital");
diff --git a/drivers/usb/host/isp1760-hcd.c b/drivers/usb/host/isp1760-hcd.c
index 5309d73..568446c 100644
--- a/drivers/usb/host/isp1760-hcd.c
+++ b/drivers/usb/host/isp1760-hcd.c
@@ -503,15 +503,6 @@
reg_write32(hcd->regs, HC_INTERRUPT_ENABLE, INTERRUPT_ENABLE_MASK);
- /*
- * PORT 1 Control register of the ISP1760 is the OTG control
- * register on ISP1761. Since there is no OTG or device controller
- * support in this driver, we use port 1 as a "normal" USB host port on
- * both chips.
- */
- reg_write32(hcd->regs, HC_PORT1_CTRL, PORT1_POWER | PORT1_INIT2);
- mdelay(10);
-
priv->hcs_params = reg_read32(hcd->regs, HC_HCSPARAMS);
return priv_init(hcd);