Blackfin: make hardware trace output a little more useful
Decode the vast majority of insns that appear in the trace buffer to get a
better idea of what's going on at a glance.
Signed-off-by: Robin Getz <robin.getz@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
diff --git a/arch/blackfin/include/asm/trace.h b/arch/blackfin/include/asm/trace.h
index 9117939..33589a2 100644
--- a/arch/blackfin/include/asm/trace.h
+++ b/arch/blackfin/include/asm/trace.h
@@ -25,10 +25,10 @@
extern unsigned long software_trace_buff[];
#if defined(CONFIG_DEBUG_VERBOSE)
extern void decode_address(char *buf, unsigned long address);
-extern bool get_instruction(unsigned short *val, unsigned short *address);
+extern bool get_instruction(unsigned int *val, unsigned short *address);
#else
-#define decode_address(buf, address)
-#define get_instruction(val, address) 0
+static inline void decode_address(char *buf, unsigned long address) { }
+static inline bool get_instruction(unsigned int *val, unsigned short *address) { return false; }
#endif
/* Trace Macros for C files */
diff --git a/arch/blackfin/kernel/dumpstack.c b/arch/blackfin/kernel/dumpstack.c
index e81392c..5cfbaa2 100644
--- a/arch/blackfin/kernel/dumpstack.c
+++ b/arch/blackfin/kernel/dumpstack.c
@@ -18,21 +18,14 @@
*/
static bool is_bfin_call(unsigned short *addr)
{
- unsigned short opcode = 0, *ins_addr;
- ins_addr = (unsigned short *)addr;
+ unsigned int opcode;
- if (!get_instruction(&opcode, ins_addr))
+ if (!get_instruction(&opcode, addr))
return false;
if ((opcode >= 0x0060 && opcode <= 0x0067) ||
- (opcode >= 0x0070 && opcode <= 0x0077))
- return true;
-
- ins_addr--;
- if (!get_instruction(&opcode, ins_addr))
- return false;
-
- if (opcode >= 0xE300 && opcode <= 0xE3FF)
+ (opcode >= 0x0070 && opcode <= 0x0077) ||
+ (opcode >= 0xE3000000 && opcode <= 0xE3FFFFFF))
return true;
return false;
diff --git a/arch/blackfin/kernel/trace.c b/arch/blackfin/kernel/trace.c
index 5aa0d5e..317d427 100644
--- a/arch/blackfin/kernel/trace.c
+++ b/arch/blackfin/kernel/trace.c
@@ -75,6 +75,26 @@
} else if (address >= L1_ROM_START && address < L1_ROM_START + L1_ROM_LENGTH) {
strcat(buf, "/* on-chip L1 ROM */");
return;
+
+ } else if (address >= L1_SCRATCH_START && address < L1_SCRATCH_START + L1_SCRATCH_LENGTH) {
+ strcat(buf, "/* on-chip scratchpad */");
+ return;
+
+ } else if (address >= physical_mem_end && address < ASYNC_BANK0_BASE) {
+ strcat(buf, "/* unconnected memory */");
+ return;
+
+ } else if (address >= ASYNC_BANK3_BASE + ASYNC_BANK3_SIZE && address < BOOT_ROM_START) {
+ strcat(buf, "/* reserved memory */");
+ return;
+
+ } else if (address >= L1_DATA_A_START && address < L1_DATA_A_START + L1_DATA_A_LENGTH) {
+ strcat(buf, "/* on-chip Data Bank A */");
+ return;
+
+ } else if (address >= L1_DATA_B_START && address < L1_DATA_B_START + L1_DATA_B_LENGTH) {
+ strcat(buf, "/* on-chip Data Bank B */");
+ return;
}
/*
@@ -173,7 +193,7 @@
* Similar to get_user, do some address checking, then dereference
* Return true on success, false on bad address
*/
-bool get_instruction(unsigned short *val, unsigned short *address)
+bool get_mem16(unsigned short *val, unsigned short *address)
{
unsigned long addr = (unsigned long)address;
@@ -181,10 +201,6 @@
if (addr & 0x1)
return false;
- /* MMR region will never have instructions */
- if (addr >= SYSMMR_BASE)
- return false;
-
switch (bfin_mem_access_type(addr, 2)) {
case BFIN_MEM_ACCESS_CORE:
case BFIN_MEM_ACCESS_CORE_ONLY:
@@ -201,60 +217,430 @@
}
}
+bool get_instruction(unsigned int *val, unsigned short *address)
+{
+ unsigned long addr = (unsigned long)address;
+ unsigned short opcode0, opcode1;
+
+ /* Check for odd addresses */
+ if (addr & 0x1)
+ return false;
+
+ /* MMR region will never have instructions */
+ if (addr >= SYSMMR_BASE)
+ return false;
+
+ /* Scratchpad will never have instructions */
+ if (addr >= L1_SCRATCH_START && addr < L1_SCRATCH_START + L1_SCRATCH_LENGTH)
+ return false;
+
+ /* Data banks will never have instructions */
+ if (addr >= BOOT_ROM_START + BOOT_ROM_LENGTH && addr < L1_CODE_START)
+ return false;
+
+ if (!get_mem16(&opcode0, address))
+ return false;
+
+ /* was this a 32-bit instruction? If so, get the next 16 bits */
+ if ((opcode0 & 0xc000) == 0xc000) {
+ if (!get_mem16(&opcode1, address + 1))
+ return false;
+ *val = (opcode0 << 16) + opcode1;
+ } else
+ *val = opcode0;
+
+ return true;
+}
+
+#if defined(CONFIG_DEBUG_BFIN_HWTRACE_ON)
/*
* decode the instruction if we are printing out the trace, as it
* makes things easier to follow, without running it through objdump
- * These are the normal instructions which cause change of flow, which
- * would be at the source of the trace buffer
+ * Decode the change of flow, and the common load/store instructions
+ * which are the main cause for faults, and discontinuities in the trace
+ * buffer.
*/
-#if defined(CONFIG_DEBUG_BFIN_HWTRACE_ON)
-static void decode_instruction(unsigned short *address)
-{
- unsigned short opcode;
- if (get_instruction(&opcode, address)) {
- if (opcode == 0x0010)
- pr_cont("RTS");
- else if (opcode == 0x0011)
- pr_cont("RTI");
- else if (opcode == 0x0012)
- pr_cont("RTX");
- else if (opcode == 0x0013)
- pr_cont("RTN");
- else if (opcode == 0x0014)
- pr_cont("RTE");
- else if (opcode == 0x0025)
- pr_cont("EMUEXCPT");
- else if (opcode >= 0x0040 && opcode <= 0x0047)
- pr_cont("STI R%i", opcode & 7);
- else if (opcode >= 0x0050 && opcode <= 0x0057)
- pr_cont("JUMP (P%i)", opcode & 7);
- else if (opcode >= 0x0060 && opcode <= 0x0067)
- pr_cont("CALL (P%i)", opcode & 7);
- else if (opcode >= 0x0070 && opcode <= 0x0077)
- pr_cont("CALL (PC+P%i)", opcode & 7);
- else if (opcode >= 0x0080 && opcode <= 0x0087)
- pr_cont("JUMP (PC+P%i)", opcode & 7);
- else if (opcode >= 0x0090 && opcode <= 0x009F)
- pr_cont("RAISE 0x%x", opcode & 0xF);
- else if (opcode >= 0x00A0 && opcode <= 0x00AF)
- pr_cont("EXCPT 0x%x", opcode & 0xF);
- else if ((opcode >= 0x1000 && opcode <= 0x13FF) || (opcode >= 0x1800 && opcode <= 0x1BFF))
- pr_cont("IF !CC JUMP");
- else if ((opcode >= 0x1400 && opcode <= 0x17ff) || (opcode >= 0x1c00 && opcode <= 0x1fff))
- pr_cont("IF CC JUMP");
- else if (opcode >= 0x2000 && opcode <= 0x2fff)
- pr_cont("JUMP.S");
- else if (opcode >= 0xe080 && opcode <= 0xe0ff)
- pr_cont("LSETUP");
- else if (opcode >= 0xe200 && opcode <= 0xe2ff)
- pr_cont("JUMP.L");
- else if (opcode >= 0xe300 && opcode <= 0xe3ff)
- pr_cont("CALL pcrel");
- else
- pr_cont("0x%04x", opcode);
+#define ProgCtrl_opcode 0x0000
+#define ProgCtrl_poprnd_bits 0
+#define ProgCtrl_poprnd_mask 0xf
+#define ProgCtrl_prgfunc_bits 4
+#define ProgCtrl_prgfunc_mask 0xf
+#define ProgCtrl_code_bits 8
+#define ProgCtrl_code_mask 0xff
+
+static void decode_ProgCtrl_0(unsigned int opcode)
+{
+ int poprnd = ((opcode >> ProgCtrl_poprnd_bits) & ProgCtrl_poprnd_mask);
+ int prgfunc = ((opcode >> ProgCtrl_prgfunc_bits) & ProgCtrl_prgfunc_mask);
+
+ if (prgfunc == 0 && poprnd == 0)
+ pr_cont("NOP");
+ else if (prgfunc == 1 && poprnd == 0)
+ pr_cont("RTS");
+ else if (prgfunc == 1 && poprnd == 1)
+ pr_cont("RTI");
+ else if (prgfunc == 1 && poprnd == 2)
+ pr_cont("RTX");
+ else if (prgfunc == 1 && poprnd == 3)
+ pr_cont("RTN");
+ else if (prgfunc == 1 && poprnd == 4)
+ pr_cont("RTE");
+ else if (prgfunc == 2 && poprnd == 0)
+ pr_cont("IDLE");
+ else if (prgfunc == 2 && poprnd == 3)
+ pr_cont("CSYNC");
+ else if (prgfunc == 2 && poprnd == 4)
+ pr_cont("SSYNC");
+ else if (prgfunc == 2 && poprnd == 5)
+ pr_cont("EMUEXCPT");
+ else if (prgfunc == 3)
+ pr_cont("CLI R%i", poprnd);
+ else if (prgfunc == 4)
+ pr_cont("STI R%i", poprnd);
+ else if (prgfunc == 5)
+ pr_cont("JUMP (P%i)", poprnd);
+ else if (prgfunc == 6)
+ pr_cont("CALL (P%i)", poprnd);
+ else if (prgfunc == 7)
+ pr_cont("CALL (PC + P%i)", poprnd);
+ else if (prgfunc == 8)
+ pr_cont("JUMP (PC + P%i", poprnd);
+ else if (prgfunc == 9)
+ pr_cont("RAISE %i", poprnd);
+ else if (prgfunc == 10)
+ pr_cont("EXCPT %i", poprnd);
+ else
+ pr_cont("0x%04x", opcode);
+
+}
+
+#define BRCC_opcode 0x1000
+#define BRCC_offset_bits 0
+#define BRCC_offset_mask 0x3ff
+#define BRCC_B_bits 10
+#define BRCC_B_mask 0x1
+#define BRCC_T_bits 11
+#define BRCC_T_mask 0x1
+#define BRCC_code_bits 12
+#define BRCC_code_mask 0xf
+
+static void decode_BRCC_0(unsigned int opcode)
+{
+ int B = ((opcode >> BRCC_B_bits) & BRCC_B_mask);
+ int T = ((opcode >> BRCC_T_bits) & BRCC_T_mask);
+
+ pr_cont("IF %sCC JUMP pcrel %s", T ? "" : "!", B ? "(BP)" : "");
+}
+
+#define CALLa_opcode 0xe2000000
+#define CALLa_addr_bits 0
+#define CALLa_addr_mask 0xffffff
+#define CALLa_S_bits 24
+#define CALLa_S_mask 0x1
+#define CALLa_code_bits 25
+#define CALLa_code_mask 0x7f
+
+static void decode_CALLa_0(unsigned int opcode)
+{
+ int S = ((opcode >> (CALLa_S_bits - 16)) & CALLa_S_mask);
+
+ if (S)
+ pr_cont("CALL pcrel");
+ else
+ pr_cont("JUMP.L");
+}
+
+#define LoopSetup_opcode 0xe0800000
+#define LoopSetup_eoffset_bits 0
+#define LoopSetup_eoffset_mask 0x3ff
+#define LoopSetup_dontcare_bits 10
+#define LoopSetup_dontcare_mask 0x3
+#define LoopSetup_reg_bits 12
+#define LoopSetup_reg_mask 0xf
+#define LoopSetup_soffset_bits 16
+#define LoopSetup_soffset_mask 0xf
+#define LoopSetup_c_bits 20
+#define LoopSetup_c_mask 0x1
+#define LoopSetup_rop_bits 21
+#define LoopSetup_rop_mask 0x3
+#define LoopSetup_code_bits 23
+#define LoopSetup_code_mask 0x1ff
+
+static void decode_LoopSetup_0(unsigned int opcode)
+{
+ int c = ((opcode >> LoopSetup_c_bits) & LoopSetup_c_mask);
+ int reg = ((opcode >> LoopSetup_reg_bits) & LoopSetup_reg_mask);
+ int rop = ((opcode >> LoopSetup_rop_bits) & LoopSetup_rop_mask);
+
+ pr_cont("LSETUP <> LC%i", c);
+ if ((rop & 1) == 1)
+ pr_cont("= P%i", reg);
+ if ((rop & 2) == 2)
+ pr_cont(" >> 0x1");
+}
+
+#define DspLDST_opcode 0x9c00
+#define DspLDST_reg_bits 0
+#define DspLDST_reg_mask 0x7
+#define DspLDST_i_bits 3
+#define DspLDST_i_mask 0x3
+#define DspLDST_m_bits 5
+#define DspLDST_m_mask 0x3
+#define DspLDST_aop_bits 7
+#define DspLDST_aop_mask 0x3
+#define DspLDST_W_bits 9
+#define DspLDST_W_mask 0x1
+#define DspLDST_code_bits 10
+#define DspLDST_code_mask 0x3f
+
+static void decode_dspLDST_0(unsigned int opcode)
+{
+ int i = ((opcode >> DspLDST_i_bits) & DspLDST_i_mask);
+ int m = ((opcode >> DspLDST_m_bits) & DspLDST_m_mask);
+ int W = ((opcode >> DspLDST_W_bits) & DspLDST_W_mask);
+ int aop = ((opcode >> DspLDST_aop_bits) & DspLDST_aop_mask);
+ int reg = ((opcode >> DspLDST_reg_bits) & DspLDST_reg_mask);
+
+ if (W == 0) {
+ pr_cont("R%i", reg);
+ switch (m) {
+ case 0:
+ pr_cont(" = ");
+ break;
+ case 1:
+ pr_cont(".L = ");
+ break;
+ case 2:
+ pr_cont(".W = ");
+ break;
+ }
}
+ pr_cont("[ I%i", i);
+
+ switch (aop) {
+ case 0:
+ pr_cont("++ ]");
+ break;
+ case 1:
+ pr_cont("-- ]");
+ break;
+ }
+
+ if (W == 1) {
+ pr_cont(" = R%i", reg);
+ switch (m) {
+ case 1:
+ pr_cont(".L = ");
+ break;
+ case 2:
+ pr_cont(".W = ");
+ break;
+ }
+ }
+}
+
+#define LDST_opcode 0x9000
+#define LDST_reg_bits 0
+#define LDST_reg_mask 0x7
+#define LDST_ptr_bits 3
+#define LDST_ptr_mask 0x7
+#define LDST_Z_bits 6
+#define LDST_Z_mask 0x1
+#define LDST_aop_bits 7
+#define LDST_aop_mask 0x3
+#define LDST_W_bits 9
+#define LDST_W_mask 0x1
+#define LDST_sz_bits 10
+#define LDST_sz_mask 0x3
+#define LDST_code_bits 12
+#define LDST_code_mask 0xf
+
+static void decode_LDST_0(unsigned int opcode)
+{
+ int Z = ((opcode >> LDST_Z_bits) & LDST_Z_mask);
+ int W = ((opcode >> LDST_W_bits) & LDST_W_mask);
+ int sz = ((opcode >> LDST_sz_bits) & LDST_sz_mask);
+ int aop = ((opcode >> LDST_aop_bits) & LDST_aop_mask);
+ int reg = ((opcode >> LDST_reg_bits) & LDST_reg_mask);
+ int ptr = ((opcode >> LDST_ptr_bits) & LDST_ptr_mask);
+
+ if (W == 0)
+ pr_cont("%s%i = ", (sz == 0 && Z == 1) ? "P" : "R", reg);
+
+ switch (sz) {
+ case 1:
+ pr_cont("W");
+ break;
+ case 2:
+ pr_cont("B");
+ break;
+ }
+
+ pr_cont("[P%i", ptr);
+
+ switch (aop) {
+ case 0:
+ pr_cont("++");
+ break;
+ case 1:
+ pr_cont("--");
+ break;
+ }
+ pr_cont("]");
+
+ if (W == 1)
+ pr_cont(" = %s%i ", (sz == 0 && Z == 1) ? "P" : "R", reg);
+
+ if (sz) {
+ if (Z)
+ pr_cont(" (X)");
+ else
+ pr_cont(" (Z)");
+ }
+}
+
+#define LDSTii_opcode 0xa000
+#define LDSTii_reg_bit 0
+#define LDSTii_reg_mask 0x7
+#define LDSTii_ptr_bit 3
+#define LDSTii_ptr_mask 0x7
+#define LDSTii_offset_bit 6
+#define LDSTii_offset_mask 0xf
+#define LDSTii_op_bit 10
+#define LDSTii_op_mask 0x3
+#define LDSTii_W_bit 12
+#define LDSTii_W_mask 0x1
+#define LDSTii_code_bit 13
+#define LDSTii_code_mask 0x7
+
+static void decode_LDSTii_0(unsigned int opcode)
+{
+ int reg = ((opcode >> LDSTii_reg_bit) & LDSTii_reg_mask);
+ int ptr = ((opcode >> LDSTii_ptr_bit) & LDSTii_ptr_mask);
+ int offset = ((opcode >> LDSTii_offset_bit) & LDSTii_offset_mask);
+ int op = ((opcode >> LDSTii_op_bit) & LDSTii_op_mask);
+ int W = ((opcode >> LDSTii_W_bit) & LDSTii_W_mask);
+
+ if (W == 0) {
+ pr_cont("%s%i = %s[P%i + %i]", op == 3 ? "R" : "P", reg,
+ op == 1 || op == 2 ? "" : "W", ptr, offset);
+ if (op == 2)
+ pr_cont("(Z)");
+ if (op == 3)
+ pr_cont("(X)");
+ } else {
+ pr_cont("%s[P%i + %i] = %s%i", op == 0 ? "" : "W", ptr,
+ offset, op == 3 ? "P" : "R", reg);
+ }
+}
+
+#define LDSTidxI_opcode 0xe4000000
+#define LDSTidxI_offset_bits 0
+#define LDSTidxI_offset_mask 0xffff
+#define LDSTidxI_reg_bits 16
+#define LDSTidxI_reg_mask 0x7
+#define LDSTidxI_ptr_bits 19
+#define LDSTidxI_ptr_mask 0x7
+#define LDSTidxI_sz_bits 22
+#define LDSTidxI_sz_mask 0x3
+#define LDSTidxI_Z_bits 24
+#define LDSTidxI_Z_mask 0x1
+#define LDSTidxI_W_bits 25
+#define LDSTidxI_W_mask 0x1
+#define LDSTidxI_code_bits 26
+#define LDSTidxI_code_mask 0x3f
+
+static void decode_LDSTidxI_0(unsigned int opcode)
+{
+ int Z = ((opcode >> LDSTidxI_Z_bits) & LDSTidxI_Z_mask);
+ int W = ((opcode >> LDSTidxI_W_bits) & LDSTidxI_W_mask);
+ int sz = ((opcode >> LDSTidxI_sz_bits) & LDSTidxI_sz_mask);
+ int reg = ((opcode >> LDSTidxI_reg_bits) & LDSTidxI_reg_mask);
+ int ptr = ((opcode >> LDSTidxI_ptr_bits) & LDSTidxI_ptr_mask);
+ int offset = ((opcode >> LDSTidxI_offset_bits) & LDSTidxI_offset_mask);
+
+ if (W == 0)
+ pr_cont("%s%i = ", sz == 0 && Z == 1 ? "P" : "R", reg);
+
+ if (sz == 1)
+ pr_cont("W");
+ if (sz == 2)
+ pr_cont("B");
+
+ pr_cont("[P%i + %s0x%x]", ptr, offset & 0x20 ? "-" : "",
+ (offset & 0x1f) << 2);
+
+ if (W == 0 && sz != 0) {
+ if (Z)
+ pr_cont("(X)");
+ else
+ pr_cont("(Z)");
+ }
+
+ if (W == 1)
+ pr_cont("= %s%i", (sz == 0 && Z == 1) ? "P" : "R", reg);
+
+}
+
+static void decode_opcode(unsigned int opcode)
+{
+#ifdef CONFIG_BUG
+ if (opcode == BFIN_BUG_OPCODE)
+ pr_cont("BUG");
+ else
+#endif
+ if ((opcode & 0xffffff00) == ProgCtrl_opcode)
+ decode_ProgCtrl_0(opcode);
+ else if ((opcode & 0xfffff000) == BRCC_opcode)
+ decode_BRCC_0(opcode);
+ else if ((opcode & 0xfffff000) == 0x2000)
+ pr_cont("JUMP.S");
+ else if ((opcode & 0xfe000000) == CALLa_opcode)
+ decode_CALLa_0(opcode);
+ else if ((opcode & 0xff8000C0) == LoopSetup_opcode)
+ decode_LoopSetup_0(opcode);
+ else if ((opcode & 0xfffffc00) == DspLDST_opcode)
+ decode_dspLDST_0(opcode);
+ else if ((opcode & 0xfffff000) == LDST_opcode)
+ decode_LDST_0(opcode);
+ else if ((opcode & 0xffffe000) == LDSTii_opcode)
+ decode_LDSTii_0(opcode);
+ else if ((opcode & 0xfc000000) == LDSTidxI_opcode)
+ decode_LDSTidxI_0(opcode);
+ else if (opcode & 0xffff0000)
+ pr_cont("0x%08x", opcode);
+ else
+ pr_cont("0x%04x", opcode);
+}
+
+#define BIT_MULTI_INS 0x08000000
+static void decode_instruction(unsigned short *address)
+{
+ unsigned int opcode;
+
+ if (!get_instruction(&opcode, address))
+ return;
+
+ decode_opcode(opcode);
+
+ /* If things are a 32-bit instruction, it has the possibility of being
+ * a multi-issue instruction (a 32-bit, and 2 16 bit instrucitions)
+ * This test collidates with the unlink instruction, so disallow that
+ */
+ if ((opcode & 0xc0000000) == 0xc0000000 &&
+ (opcode & BIT_MULTI_INS) &&
+ (opcode & 0xe8000000) != 0xe8000000) {
+ pr_cont(" || ");
+ if (!get_instruction(&opcode, address + 2))
+ return;
+ decode_opcode(opcode);
+ pr_cont(" || ");
+ if (!get_instruction(&opcode, address + 3))
+ return;
+ decode_opcode(opcode);
+ }
}
#endif
@@ -397,7 +783,7 @@
if (!((unsigned long)addr & 0xF))
pr_notice("0x%p: ", addr);
- if (!get_instruction(&val, addr)) {
+ if (!get_mem16(&val, addr)) {
val = 0;
sprintf(buf, "????");
} else
diff --git a/arch/blackfin/kernel/traps.c b/arch/blackfin/kernel/traps.c
index 7c31a3d..fffcf8a 100644
--- a/arch/blackfin/kernel/traps.c
+++ b/arch/blackfin/kernel/traps.c
@@ -546,7 +546,7 @@
#ifdef CONFIG_BUG
int is_valid_bugaddr(unsigned long addr)
{
- unsigned short opcode;
+ unsigned int opcode;
if (!get_instruction(&opcode, (unsigned short *)addr))
return 0;