staging/trivial: fix typos concerning "initiali[zs]e"
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
diff --git a/drivers/staging/et131x/et131x_initpci.c b/drivers/staging/et131x/et131x_initpci.c
index 47baab3..10bcb45 100644
--- a/drivers/staging/et131x/et131x_initpci.c
+++ b/drivers/staging/et131x/et131x_initpci.c
@@ -726,7 +726,7 @@
/* Initialize link state */
et131x_link_detection_handler((unsigned long)adapter);
- /* Intialize variable for counting how long we do not have
+ /* Initialize variable for counting how long we do not have
link status */
adapter->PoMgmt.TransPhyComaModeOnBoot = 0;
diff --git a/drivers/staging/frontier/alphatrack.c b/drivers/staging/frontier/alphatrack.c
index 4e52105..4b44d7c 100644
--- a/drivers/staging/frontier/alphatrack.c
+++ b/drivers/staging/frontier/alphatrack.c
@@ -671,7 +671,7 @@
int true_size;
int retval = -ENOMEM;
- /* allocate memory for our device state and intialize it */
+ /* allocate memory for our device state and initialize it */
dev = kzalloc(sizeof(*dev), GFP_KERNEL);
if (dev == NULL) {
diff --git a/drivers/staging/frontier/tranzport.c b/drivers/staging/frontier/tranzport.c
index eed74f0..d33e176 100644
--- a/drivers/staging/frontier/tranzport.c
+++ b/drivers/staging/frontier/tranzport.c
@@ -795,7 +795,7 @@
int true_size;
int retval = -ENOMEM;
- /* allocate memory for our device state and intialize it */
+ /* allocate memory for our device state and initialize it */
dev = kzalloc(sizeof(*dev), GFP_KERNEL);
if (dev == NULL) {
diff --git a/drivers/staging/mrst-touchscreen/intel-mid-touch.c b/drivers/staging/mrst-touchscreen/intel-mid-touch.c
index 031b2f8..a45bc01 100644
--- a/drivers/staging/mrst-touchscreen/intel-mid-touch.c
+++ b/drivers/staging/mrst-touchscreen/intel-mid-touch.c
@@ -684,7 +684,7 @@
return IRQ_HANDLED;
}
-/* Intializes input device and registers with input subsystem */
+/* Initializes input device and registers with input subsystem */
static int ts_input_dev_init(struct mrstouch_dev *tsdev, struct spi_device *spi)
{
int err = 0;
diff --git a/drivers/staging/quatech_usb2/quatech_usb2.c b/drivers/staging/quatech_usb2/quatech_usb2.c
index 9838ea2..ed58f48 100644
--- a/drivers/staging/quatech_usb2/quatech_usb2.c
+++ b/drivers/staging/quatech_usb2/quatech_usb2.c
@@ -577,7 +577,7 @@
port0->bulk_in_buffer,
port0->bulk_in_size,
qt2_read_bulk_callback, serial);
- dbg("port0 bulk in URB intialised");
+ dbg("port0 bulk in URB initialised");
/* submit URB, i.e. start reading from device (async) */
dev_extra->ReadBulkStopped = false;
diff --git a/drivers/staging/rt2860/common/rtmp_init.c b/drivers/staging/rt2860/common/rtmp_init.c
index a090385..701eb89 100644
--- a/drivers/staging/rt2860/common/rtmp_init.c
+++ b/drivers/staging/rt2860/common/rtmp_init.c
@@ -704,7 +704,7 @@
DBGPRINT(RT_DEBUG_TRACE,
("--> EEPROMAddressNum = %d\n", pAd->EEPROMAddressNum));
- /* RT2860 MAC no longer auto load MAC address from E2PROM. Driver has to intialize */
+ /* RT2860 MAC no longer auto load MAC address from E2PROM. Driver has to initialize */
/* MAC address registers according to E2PROM setting */
if (mac_addr == NULL ||
strlen((char *)mac_addr) != 17 ||
@@ -2507,7 +2507,7 @@
DBGPRINT(RT_DEBUG_TRACE, ("--> UserCfgInit\n"));
/* */
- /* part I. intialize common configuration */
+ /* part I. initialize common configuration */
/* */
#ifdef RTMP_MAC_USB
pAd->BulkOutReq = 0;
@@ -2646,7 +2646,7 @@
pAd->CommonCfg.BeaconPeriod = 100; /* in mSec */
/* */
- /* part II. intialize STA specific configuration */
+ /* part II. initialize STA specific configuration */
/* */
{
RX_FILTER_SET_FLAG(pAd, fRX_FILTER_ACCEPT_DIRECT);
diff --git a/drivers/staging/rtl8192e/r819xE_firmware.c b/drivers/staging/rtl8192e/r819xE_firmware.c
index f1c859d..b3ffafe 100644
--- a/drivers/staging/rtl8192e/r819xE_firmware.c
+++ b/drivers/staging/rtl8192e/r819xE_firmware.c
@@ -1,7 +1,7 @@
/*
* Procedure: Init boot code/firmware code/data session
*
- * Description: This routine will intialize firmware. If any error occurs
+ * Description: This routine will initialize firmware. If any error occurs
* during the initialization process, the routine shall terminate
* immediately and return fail. NIC driver should call
* NdisOpenFile only from MiniportInitialize.
diff --git a/drivers/staging/rtl8192u/r8192U_core.c b/drivers/staging/rtl8192u/r8192U_core.c
index 1ff7850..51bcd01 100644
--- a/drivers/staging/rtl8192u/r8192U_core.c
+++ b/drivers/staging/rtl8192u/r8192U_core.c
@@ -1534,7 +1534,7 @@
* 1. check whether there's tx irq available, for it's a completion return
* function, it should contain enough tx irq;
* 2. check pakcet type;
- * 3. intialize sendlist, check whether the to-be send packet no greater than 1
+ * 3. initialize sendlist, check whether the to-be send packet no greater than 1
* 4. aggregation the packets, and fill firmware info and tx desc to it, etc.
* 5. check whehter the packet could be sent, otherwise just insert to wait head
* */
diff --git a/drivers/staging/rtl8192u/r819xU_firmware.c b/drivers/staging/rtl8192u/r819xU_firmware.c
index b136ee4..49ae170 100644
--- a/drivers/staging/rtl8192u/r819xU_firmware.c
+++ b/drivers/staging/rtl8192u/r819xU_firmware.c
@@ -1,7 +1,7 @@
/**************************************************************************************************
* Procedure: Init boot code/firmware code/data session
*
- * Description: This routine will intialize firmware. If any error occurs during the initialization
+ * Description: This routine will initialize firmware. If any error occurs during the initialization
* process, the routine shall terminate immediately and return fail.
* NIC driver should call NdisOpenFile only from MiniportInitialize.
*
diff --git a/drivers/staging/tidspbridge/include/dspbridge/drv.h b/drivers/staging/tidspbridge/include/dspbridge/drv.h
index f365015..c1f363e 100644
--- a/drivers/staging/tidspbridge/include/dspbridge/drv.h
+++ b/drivers/staging/tidspbridge/include/dspbridge/drv.h
@@ -193,7 +193,7 @@
* Ensures:
* 0: - *drv_obj is a valid DRV interface to the device.
* - List of DevObject Created and Initialized.
- * - List of dev_node String created and intialized.
+ * - List of dev_node String created and initialized.
* - Registry is updated with the DRV Object.
* !0: DRV Object not created
* Details:
diff --git a/drivers/staging/tidspbridge/include/dspbridge/mgr.h b/drivers/staging/tidspbridge/include/dspbridge/mgr.h
index 99f7dc0..e506c4d 100644
--- a/drivers/staging/tidspbridge/include/dspbridge/mgr.h
+++ b/drivers/staging/tidspbridge/include/dspbridge/mgr.h
@@ -192,7 +192,7 @@
* ======== mgr_init ========
* Purpose:
* Initialize MGR's private state, keeping a reference count on each
- * call. Intializes the DCD.
+ * call. Initializes the DCD.
* Parameters:
* Returns:
* TRUE if initialized; FALSE if error occured.
diff --git a/drivers/staging/tidspbridge/include/dspbridge/wdt.h b/drivers/staging/tidspbridge/include/dspbridge/wdt.h
index 4c00ba5..36193db 100644
--- a/drivers/staging/tidspbridge/include/dspbridge/wdt.h
+++ b/drivers/staging/tidspbridge/include/dspbridge/wdt.h
@@ -44,7 +44,7 @@
/**
* dsp_wdt_init() - initialize wdt3 module.
*
- * This function initilize to wdt3 module, so that
+ * This function initialize to wdt3 module, so that
* other wdt3 function can be used.
*/
int dsp_wdt_init(void);
diff --git a/drivers/staging/wlags49_h2/wl_main.c b/drivers/staging/wlags49_h2/wl_main.c
index 88d0d47..a2bc76a 100644
--- a/drivers/staging/wlags49_h2/wl_main.c
+++ b/drivers/staging/wlags49_h2/wl_main.c
@@ -450,7 +450,7 @@
/* Initialize the adapter parameters. */
spin_lock_init( &( lp->slock ));
- /* Intialize states */
+ /* Initialize states */
//lp->lockcount = 0; //PE1DNN
lp->is_handling_int = WL_NOT_HANDLING_INT;
lp->firmware_present = WL_FRIMWARE_NOT_PRESENT;
diff --git a/drivers/staging/wlan-ng/hfa384x_usb.c b/drivers/staging/wlan-ng/hfa384x_usb.c
index ea81cb5..a6efc03 100644
--- a/drivers/staging/wlan-ng/hfa384x_usb.c
+++ b/drivers/staging/wlan-ng/hfa384x_usb.c
@@ -511,7 +511,7 @@
* hfa384x_create
*
* Sets up the hfa384x_t data structure for use. Note this
-* does _not_ intialize the actual hardware, just the data structures
+* does _not_ initialize the actual hardware, just the data structures
* we use to keep track of its state.
*
* Arguments: