[ARM] 3706/2: ep93xx: add cirrus logic edb9315a support
Patch from Lennert Buytenhek
This patch adds support for the Cirrus Logic EDB9315A, an evaluation
board based on the Cirrus Logic EP9315 SoC, with 64M RAM, two USB host
ports, audio in/out, three serial ports, 10/100 ethernet, and IDE, VGA,
and LCD interfaces.
The EDB9315A is a low-cost version of the EDB9315, and has only 16M
of NOR flash, while the EDB9315 has 32M.
Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
diff --git a/arch/arm/mach-ep93xx/Kconfig b/arch/arm/mach-ep93xx/Kconfig
index c7c11f4..f1b7400 100644
--- a/arch/arm/mach-ep93xx/Kconfig
+++ b/arch/arm/mach-ep93xx/Kconfig
@@ -21,6 +21,12 @@
Say 'Y' here if you want your kernel to support the Cirrus
Logic EDB9315 Evaluation Board.
+config MACH_EDB9315A
+ bool "Support Cirrus Logic EDB9315A"
+ help
+ Say 'Y' here if you want your kernel to support the Cirrus
+ Logic EDB9315A Evaluation Board.
+
config MACH_GESBC9312
bool "Support Glomation GESBC-9312-sx"
help
diff --git a/arch/arm/mach-ep93xx/Makefile b/arch/arm/mach-ep93xx/Makefile
index feda783..1f5a6b0 100644
--- a/arch/arm/mach-ep93xx/Makefile
+++ b/arch/arm/mach-ep93xx/Makefile
@@ -8,5 +8,6 @@
obj-$(CONFIG_MACH_EDB9302) += edb9302.o
obj-$(CONFIG_MACH_EDB9315) += edb9315.o
+obj-$(CONFIG_MACH_EDB9315A) += edb9315a.o
obj-$(CONFIG_MACH_GESBC9312) += gesbc9312.o
obj-$(CONFIG_MACH_TS72XX) += ts72xx.o
diff --git a/arch/arm/mach-ep93xx/edb9315a.c b/arch/arm/mach-ep93xx/edb9315a.c
new file mode 100644
index 0000000..bfefdaa
--- /dev/null
+++ b/arch/arm/mach-ep93xx/edb9315a.c
@@ -0,0 +1,62 @@
+/*
+ * arch/arm/mach-ep93xx/edb9315a.c
+ * Cirrus Logic EDB9315A support.
+ *
+ * Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or (at
+ * your option) any later version.
+ */
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/mtd/physmap.h>
+#include <linux/platform_device.h>
+#include <asm/io.h>
+#include <asm/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+static struct physmap_flash_data edb9315a_flash_data = {
+ .width = 2,
+};
+
+static struct resource edb9315a_flash_resource = {
+ .start = 0x60000000,
+ .end = 0x60ffffff,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct platform_device edb9315a_flash = {
+ .name = "physmap-flash",
+ .id = 0,
+ .dev = {
+ .platform_data = &edb9315a_flash_data,
+ },
+ .num_resources = 1,
+ .resource = &edb9315a_flash_resource,
+};
+
+static void __init edb9315a_init_machine(void)
+{
+ ep93xx_init_devices();
+ platform_device_register(&edb9315a_flash);
+}
+
+MACHINE_START(EDB9315A, "Cirrus Logic EDB9315A Evaluation Board")
+ /* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
+ .phys_io = EP93XX_APB_PHYS_BASE,
+ .io_pg_offst = ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
+ .boot_params = 0xc0000100,
+ .map_io = ep93xx_map_io,
+ .init_irq = ep93xx_init_irq,
+ .timer = &ep93xx_timer,
+ .init_machine = edb9315a_init_machine,
+MACHINE_END