| /****************************************************************************** |
| * |
| * Copyright(c) 2003 - 2011 Intel Corporation. All rights reserved. |
| * |
| * Portions of this file are derived from the ipw3945 project, as well |
| * as portions of the ieee80211 subsystem header files. |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of version 2 of the GNU General Public License as |
| * published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, but WITHOUT |
| * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or |
| * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for |
| * more details. |
| * |
| * You should have received a copy of the GNU General Public License along with |
| * this program; if not, write to the Free Software Foundation, Inc., |
| * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA |
| * |
| * The full GNU General Public License is included in this distribution in the |
| * file called LICENSE. |
| * |
| * Contact Information: |
| * Intel Linux Wireless <ilw@linux.intel.com> |
| * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 |
| * |
| *****************************************************************************/ |
| |
| #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt |
| |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/init.h> |
| #include <linux/pci.h> |
| #include <linux/pci-aspm.h> |
| #include <linux/slab.h> |
| #include <linux/dma-mapping.h> |
| #include <linux/delay.h> |
| #include <linux/sched.h> |
| #include <linux/skbuff.h> |
| #include <linux/netdevice.h> |
| #include <linux/firmware.h> |
| #include <linux/etherdevice.h> |
| #include <linux/if_arp.h> |
| |
| #include <net/mac80211.h> |
| |
| #include <asm/div64.h> |
| |
| #define DRV_NAME "iwl4965" |
| |
| #include "common.h" |
| #include "4965.h" |
| |
| /****************************************************************************** |
| * |
| * module boiler plate |
| * |
| ******************************************************************************/ |
| |
| /* |
| * module name, copyright, version, etc. |
| */ |
| #define DRV_DESCRIPTION "Intel(R) Wireless WiFi 4965 driver for Linux" |
| |
| #ifdef CONFIG_IWLEGACY_DEBUG |
| #define VD "d" |
| #else |
| #define VD |
| #endif |
| |
| #define DRV_VERSION IWLWIFI_VERSION VD |
| |
| MODULE_DESCRIPTION(DRV_DESCRIPTION); |
| MODULE_VERSION(DRV_VERSION); |
| MODULE_AUTHOR(DRV_COPYRIGHT " " DRV_AUTHOR); |
| MODULE_LICENSE("GPL"); |
| MODULE_ALIAS("iwl4965"); |
| |
| void |
| il4965_check_abort_status(struct il_priv *il, u8 frame_count, u32 status) |
| { |
| if (frame_count == 1 && status == TX_STATUS_FAIL_RFKILL_FLUSH) { |
| IL_ERR("Tx flush command to flush out all frames\n"); |
| if (!test_bit(S_EXIT_PENDING, &il->status)) |
| queue_work(il->workqueue, &il->tx_flush); |
| } |
| } |
| |
| /* |
| * EEPROM |
| */ |
| struct il_mod_params il4965_mod_params = { |
| .restart_fw = 1, |
| /* the rest are 0 by default */ |
| }; |
| |
| void |
| il4965_rx_queue_reset(struct il_priv *il, struct il_rx_queue *rxq) |
| { |
| unsigned long flags; |
| int i; |
| spin_lock_irqsave(&rxq->lock, flags); |
| INIT_LIST_HEAD(&rxq->rx_free); |
| INIT_LIST_HEAD(&rxq->rx_used); |
| /* Fill the rx_used queue with _all_ of the Rx buffers */ |
| for (i = 0; i < RX_FREE_BUFFERS + RX_QUEUE_SIZE; i++) { |
| /* In the reset function, these buffers may have been allocated |
| * to an SKB, so we need to unmap and free potential storage */ |
| if (rxq->pool[i].page != NULL) { |
| pci_unmap_page(il->pci_dev, rxq->pool[i].page_dma, |
| PAGE_SIZE << il->hw_params.rx_page_order, |
| PCI_DMA_FROMDEVICE); |
| __il_free_pages(il, rxq->pool[i].page); |
| rxq->pool[i].page = NULL; |
| } |
| list_add_tail(&rxq->pool[i].list, &rxq->rx_used); |
| } |
| |
| for (i = 0; i < RX_QUEUE_SIZE; i++) |
| rxq->queue[i] = NULL; |
| |
| /* Set us so that we have processed and used all buffers, but have |
| * not restocked the Rx queue with fresh buffers */ |
| rxq->read = rxq->write = 0; |
| rxq->write_actual = 0; |
| rxq->free_count = 0; |
| spin_unlock_irqrestore(&rxq->lock, flags); |
| } |
| |
| int |
| il4965_rx_init(struct il_priv *il, struct il_rx_queue *rxq) |
| { |
| u32 rb_size; |
| const u32 rfdnlog = RX_QUEUE_SIZE_LOG; /* 256 RBDs */ |
| u32 rb_timeout = 0; |
| |
| if (il->cfg->mod_params->amsdu_size_8K) |
| rb_size = FH49_RCSR_RX_CONFIG_REG_VAL_RB_SIZE_8K; |
| else |
| rb_size = FH49_RCSR_RX_CONFIG_REG_VAL_RB_SIZE_4K; |
| |
| /* Stop Rx DMA */ |
| il_wr(il, FH49_MEM_RCSR_CHNL0_CONFIG_REG, 0); |
| |
| /* Reset driver's Rx queue write idx */ |
| il_wr(il, FH49_RSCSR_CHNL0_RBDCB_WPTR_REG, 0); |
| |
| /* Tell device where to find RBD circular buffer in DRAM */ |
| il_wr(il, FH49_RSCSR_CHNL0_RBDCB_BASE_REG, (u32) (rxq->bd_dma >> 8)); |
| |
| /* Tell device where in DRAM to update its Rx status */ |
| il_wr(il, FH49_RSCSR_CHNL0_STTS_WPTR_REG, rxq->rb_stts_dma >> 4); |
| |
| /* Enable Rx DMA |
| * Direct rx interrupts to hosts |
| * Rx buffer size 4 or 8k |
| * RB timeout 0x10 |
| * 256 RBDs |
| */ |
| il_wr(il, FH49_MEM_RCSR_CHNL0_CONFIG_REG, |
| FH49_RCSR_RX_CONFIG_CHNL_EN_ENABLE_VAL | |
| FH49_RCSR_CHNL0_RX_CONFIG_IRQ_DEST_INT_HOST_VAL | |
| FH49_RCSR_CHNL0_RX_CONFIG_SINGLE_FRAME_MSK | |
| rb_size | |
| (rb_timeout << FH49_RCSR_RX_CONFIG_REG_IRQ_RBTH_POS) | |
| (rfdnlog << FH49_RCSR_RX_CONFIG_RBDCB_SIZE_POS)); |
| |
| /* Set interrupt coalescing timer to default (2048 usecs) */ |
| il_write8(il, CSR_INT_COALESCING, IL_HOST_INT_TIMEOUT_DEF); |
| |
| return 0; |
| } |
| |
| static void |
| il4965_set_pwr_vmain(struct il_priv *il) |
| { |
| /* |
| * (for documentation purposes) |
| * to set power to V_AUX, do: |
| |
| if (pci_pme_capable(il->pci_dev, PCI_D3cold)) |
| il_set_bits_mask_prph(il, APMG_PS_CTRL_REG, |
| APMG_PS_CTRL_VAL_PWR_SRC_VAUX, |
| ~APMG_PS_CTRL_MSK_PWR_SRC); |
| */ |
| |
| il_set_bits_mask_prph(il, APMG_PS_CTRL_REG, |
| APMG_PS_CTRL_VAL_PWR_SRC_VMAIN, |
| ~APMG_PS_CTRL_MSK_PWR_SRC); |
| } |
| |
| int |
| il4965_hw_nic_init(struct il_priv *il) |
| { |
| unsigned long flags; |
| struct il_rx_queue *rxq = &il->rxq; |
| int ret; |
| |
| spin_lock_irqsave(&il->lock, flags); |
| il_apm_init(il); |
| /* Set interrupt coalescing calibration timer to default (512 usecs) */ |
| il_write8(il, CSR_INT_COALESCING, IL_HOST_INT_CALIB_TIMEOUT_DEF); |
| spin_unlock_irqrestore(&il->lock, flags); |
| |
| il4965_set_pwr_vmain(il); |
| il4965_nic_config(il); |
| |
| /* Allocate the RX queue, or reset if it is already allocated */ |
| if (!rxq->bd) { |
| ret = il_rx_queue_alloc(il); |
| if (ret) { |
| IL_ERR("Unable to initialize Rx queue\n"); |
| return -ENOMEM; |
| } |
| } else |
| il4965_rx_queue_reset(il, rxq); |
| |
| il4965_rx_replenish(il); |
| |
| il4965_rx_init(il, rxq); |
| |
| spin_lock_irqsave(&il->lock, flags); |
| |
| rxq->need_update = 1; |
| il_rx_queue_update_write_ptr(il, rxq); |
| |
| spin_unlock_irqrestore(&il->lock, flags); |
| |
| /* Allocate or reset and init all Tx and Command queues */ |
| if (!il->txq) { |
| ret = il4965_txq_ctx_alloc(il); |
| if (ret) |
| return ret; |
| } else |
| il4965_txq_ctx_reset(il); |
| |
| set_bit(S_INIT, &il->status); |
| |
| return 0; |
| } |
| |
| /** |
| * il4965_dma_addr2rbd_ptr - convert a DMA address to a uCode read buffer ptr |
| */ |
| static inline __le32 |
| il4965_dma_addr2rbd_ptr(struct il_priv *il, dma_addr_t dma_addr) |
| { |
| return cpu_to_le32((u32) (dma_addr >> 8)); |
| } |
| |
| /** |
| * il4965_rx_queue_restock - refill RX queue from pre-allocated pool |
| * |
| * If there are slots in the RX queue that need to be restocked, |
| * and we have free pre-allocated buffers, fill the ranks as much |
| * as we can, pulling from rx_free. |
| * |
| * This moves the 'write' idx forward to catch up with 'processed', and |
| * also updates the memory address in the firmware to reference the new |
| * target buffer. |
| */ |
| void |
| il4965_rx_queue_restock(struct il_priv *il) |
| { |
| struct il_rx_queue *rxq = &il->rxq; |
| struct list_head *element; |
| struct il_rx_buf *rxb; |
| unsigned long flags; |
| |
| spin_lock_irqsave(&rxq->lock, flags); |
| while (il_rx_queue_space(rxq) > 0 && rxq->free_count) { |
| /* The overwritten rxb must be a used one */ |
| rxb = rxq->queue[rxq->write]; |
| BUG_ON(rxb && rxb->page); |
| |
| /* Get next free Rx buffer, remove from free list */ |
| element = rxq->rx_free.next; |
| rxb = list_entry(element, struct il_rx_buf, list); |
| list_del(element); |
| |
| /* Point to Rx buffer via next RBD in circular buffer */ |
| rxq->bd[rxq->write] = |
| il4965_dma_addr2rbd_ptr(il, rxb->page_dma); |
| rxq->queue[rxq->write] = rxb; |
| rxq->write = (rxq->write + 1) & RX_QUEUE_MASK; |
| rxq->free_count--; |
| } |
| spin_unlock_irqrestore(&rxq->lock, flags); |
| /* If the pre-allocated buffer pool is dropping low, schedule to |
| * refill it */ |
| if (rxq->free_count <= RX_LOW_WATERMARK) |
| queue_work(il->workqueue, &il->rx_replenish); |
| |
| /* If we've added more space for the firmware to place data, tell it. |
| * Increment device's write pointer in multiples of 8. */ |
| if (rxq->write_actual != (rxq->write & ~0x7)) { |
| spin_lock_irqsave(&rxq->lock, flags); |
| rxq->need_update = 1; |
| spin_unlock_irqrestore(&rxq->lock, flags); |
| il_rx_queue_update_write_ptr(il, rxq); |
| } |
| } |
| |
| /** |
| * il4965_rx_replenish - Move all used packet from rx_used to rx_free |
| * |
| * When moving to rx_free an SKB is allocated for the slot. |
| * |
| * Also restock the Rx queue via il_rx_queue_restock. |
| * This is called as a scheduled work item (except for during initialization) |
| */ |
| static void |
| il4965_rx_allocate(struct il_priv *il, gfp_t priority) |
| { |
| struct il_rx_queue *rxq = &il->rxq; |
| struct list_head *element; |
| struct il_rx_buf *rxb; |
| struct page *page; |
| dma_addr_t page_dma; |
| unsigned long flags; |
| gfp_t gfp_mask = priority; |
| |
| while (1) { |
| spin_lock_irqsave(&rxq->lock, flags); |
| if (list_empty(&rxq->rx_used)) { |
| spin_unlock_irqrestore(&rxq->lock, flags); |
| return; |
| } |
| spin_unlock_irqrestore(&rxq->lock, flags); |
| |
| if (rxq->free_count > RX_LOW_WATERMARK) |
| gfp_mask |= __GFP_NOWARN; |
| |
| if (il->hw_params.rx_page_order > 0) |
| gfp_mask |= __GFP_COMP; |
| |
| /* Alloc a new receive buffer */ |
| page = alloc_pages(gfp_mask, il->hw_params.rx_page_order); |
| if (!page) { |
| if (net_ratelimit()) |
| D_INFO("alloc_pages failed, " "order: %d\n", |
| il->hw_params.rx_page_order); |
| |
| if (rxq->free_count <= RX_LOW_WATERMARK && |
| net_ratelimit()) |
| IL_ERR("Failed to alloc_pages with %s. " |
| "Only %u free buffers remaining.\n", |
| priority == |
| GFP_ATOMIC ? "GFP_ATOMIC" : "GFP_KERNEL", |
| rxq->free_count); |
| /* We don't reschedule replenish work here -- we will |
| * call the restock method and if it still needs |
| * more buffers it will schedule replenish */ |
| return; |
| } |
| |
| /* Get physical address of the RB */ |
| page_dma = |
| pci_map_page(il->pci_dev, page, 0, |
| PAGE_SIZE << il->hw_params.rx_page_order, |
| PCI_DMA_FROMDEVICE); |
| if (unlikely(pci_dma_mapping_error(il->pci_dev, page_dma))) { |
| __free_pages(page, il->hw_params.rx_page_order); |
| break; |
| } |
| |
| spin_lock_irqsave(&rxq->lock, flags); |
| |
| if (list_empty(&rxq->rx_used)) { |
| spin_unlock_irqrestore(&rxq->lock, flags); |
| pci_unmap_page(il->pci_dev, page_dma, |
| PAGE_SIZE << il->hw_params.rx_page_order, |
| PCI_DMA_FROMDEVICE); |
| __free_pages(page, il->hw_params.rx_page_order); |
| return; |
| } |
| |
| element = rxq->rx_used.next; |
| rxb = list_entry(element, struct il_rx_buf, list); |
| list_del(element); |
| |
| BUG_ON(rxb->page); |
| |
| rxb->page = page; |
| rxb->page_dma = page_dma; |
| list_add_tail(&rxb->list, &rxq->rx_free); |
| rxq->free_count++; |
| il->alloc_rxb_page++; |
| |
| spin_unlock_irqrestore(&rxq->lock, flags); |
| } |
| } |
| |
| void |
| il4965_rx_replenish(struct il_priv *il) |
| { |
| unsigned long flags; |
| |
| il4965_rx_allocate(il, GFP_KERNEL); |
| |
| spin_lock_irqsave(&il->lock, flags); |
| il4965_rx_queue_restock(il); |
| spin_unlock_irqrestore(&il->lock, flags); |
| } |
| |
| void |
| il4965_rx_replenish_now(struct il_priv *il) |
| { |
| il4965_rx_allocate(il, GFP_ATOMIC); |
| |
| il4965_rx_queue_restock(il); |
| } |
| |
| /* Assumes that the skb field of the buffers in 'pool' is kept accurate. |
| * If an SKB has been detached, the POOL needs to have its SKB set to NULL |
| * This free routine walks the list of POOL entries and if SKB is set to |
| * non NULL it is unmapped and freed |
| */ |
| void |
| il4965_rx_queue_free(struct il_priv *il, struct il_rx_queue *rxq) |
| { |
| int i; |
| for (i = 0; i < RX_QUEUE_SIZE + RX_FREE_BUFFERS; i++) { |
| if (rxq->pool[i].page != NULL) { |
| pci_unmap_page(il->pci_dev, rxq->pool[i].page_dma, |
| PAGE_SIZE << il->hw_params.rx_page_order, |
| PCI_DMA_FROMDEVICE); |
| __il_free_pages(il, rxq->pool[i].page); |
| rxq->pool[i].page = NULL; |
| } |
| } |
| |
| dma_free_coherent(&il->pci_dev->dev, 4 * RX_QUEUE_SIZE, rxq->bd, |
| rxq->bd_dma); |
| dma_free_coherent(&il->pci_dev->dev, sizeof(struct il_rb_status), |
| rxq->rb_stts, rxq->rb_stts_dma); |
| rxq->bd = NULL; |
| rxq->rb_stts = NULL; |
| } |
| |
| int |
| il4965_rxq_stop(struct il_priv *il) |
| { |
| int ret; |
| |
| _il_wr(il, FH49_MEM_RCSR_CHNL0_CONFIG_REG, 0); |
| ret = _il_poll_bit(il, FH49_MEM_RSSR_RX_STATUS_REG, |
| FH49_RSSR_CHNL0_RX_STATUS_CHNL_IDLE, |
| FH49_RSSR_CHNL0_RX_STATUS_CHNL_IDLE, |
| 1000); |
| if (ret < 0) |
| IL_ERR("Can't stop Rx DMA.\n"); |
| |
| return 0; |
| } |
| |
| int |
| il4965_hwrate_to_mac80211_idx(u32 rate_n_flags, enum ieee80211_band band) |
| { |
| int idx = 0; |
| int band_offset = 0; |
| |
| /* HT rate format: mac80211 wants an MCS number, which is just LSB */ |
| if (rate_n_flags & RATE_MCS_HT_MSK) { |
| idx = (rate_n_flags & 0xff); |
| return idx; |
| /* Legacy rate format, search for match in table */ |
| } else { |
| if (band == IEEE80211_BAND_5GHZ) |
| band_offset = IL_FIRST_OFDM_RATE; |
| for (idx = band_offset; idx < RATE_COUNT_LEGACY; idx++) |
| if (il_rates[idx].plcp == (rate_n_flags & 0xFF)) |
| return idx - band_offset; |
| } |
| |
| return -1; |
| } |
| |
| static int |
| il4965_calc_rssi(struct il_priv *il, struct il_rx_phy_res *rx_resp) |
| { |
| /* data from PHY/DSP regarding signal strength, etc., |
| * contents are always there, not configurable by host. */ |
| struct il4965_rx_non_cfg_phy *ncphy = |
| (struct il4965_rx_non_cfg_phy *)rx_resp->non_cfg_phy_buf; |
| u32 agc = |
| (le16_to_cpu(ncphy->agc_info) & IL49_AGC_DB_MASK) >> |
| IL49_AGC_DB_POS; |
| |
| u32 valid_antennae = |
| (le16_to_cpu(rx_resp->phy_flags) & IL49_RX_PHY_FLAGS_ANTENNAE_MASK) |
| >> IL49_RX_PHY_FLAGS_ANTENNAE_OFFSET; |
| u8 max_rssi = 0; |
| u32 i; |
| |
| /* Find max rssi among 3 possible receivers. |
| * These values are measured by the digital signal processor (DSP). |
| * They should stay fairly constant even as the signal strength varies, |
| * if the radio's automatic gain control (AGC) is working right. |
| * AGC value (see below) will provide the "interesting" info. */ |
| for (i = 0; i < 3; i++) |
| if (valid_antennae & (1 << i)) |
| max_rssi = max(ncphy->rssi_info[i << 1], max_rssi); |
| |
| D_STATS("Rssi In A %d B %d C %d Max %d AGC dB %d\n", |
| ncphy->rssi_info[0], ncphy->rssi_info[2], ncphy->rssi_info[4], |
| max_rssi, agc); |
| |
| /* dBm = max_rssi dB - agc dB - constant. |
| * Higher AGC (higher radio gain) means lower signal. */ |
| return max_rssi - agc - IL4965_RSSI_OFFSET; |
| } |
| |
| static u32 |
| il4965_translate_rx_status(struct il_priv *il, u32 decrypt_in) |
| { |
| u32 decrypt_out = 0; |
| |
| if ((decrypt_in & RX_RES_STATUS_STATION_FOUND) == |
| RX_RES_STATUS_STATION_FOUND) |
| decrypt_out |= |
| (RX_RES_STATUS_STATION_FOUND | |
| RX_RES_STATUS_NO_STATION_INFO_MISMATCH); |
| |
| decrypt_out |= (decrypt_in & RX_RES_STATUS_SEC_TYPE_MSK); |
| |
| /* packet was not encrypted */ |
| if ((decrypt_in & RX_RES_STATUS_SEC_TYPE_MSK) == |
| RX_RES_STATUS_SEC_TYPE_NONE) |
| return decrypt_out; |
| |
| /* packet was encrypted with unknown alg */ |
| if ((decrypt_in & RX_RES_STATUS_SEC_TYPE_MSK) == |
| RX_RES_STATUS_SEC_TYPE_ERR) |
| return decrypt_out; |
| |
| /* decryption was not done in HW */ |
| if ((decrypt_in & RX_MPDU_RES_STATUS_DEC_DONE_MSK) != |
| RX_MPDU_RES_STATUS_DEC_DONE_MSK) |
| return decrypt_out; |
| |
| switch (decrypt_in & RX_RES_STATUS_SEC_TYPE_MSK) { |
| |
| case RX_RES_STATUS_SEC_TYPE_CCMP: |
| /* alg is CCM: check MIC only */ |
| if (!(decrypt_in & RX_MPDU_RES_STATUS_MIC_OK)) |
| /* Bad MIC */ |
| decrypt_out |= RX_RES_STATUS_BAD_ICV_MIC; |
| else |
| decrypt_out |= RX_RES_STATUS_DECRYPT_OK; |
| |
| break; |
| |
| case RX_RES_STATUS_SEC_TYPE_TKIP: |
| if (!(decrypt_in & RX_MPDU_RES_STATUS_TTAK_OK)) { |
| /* Bad TTAK */ |
| decrypt_out |= RX_RES_STATUS_BAD_KEY_TTAK; |
| break; |
| } |
| /* fall through if TTAK OK */ |
| default: |
| if (!(decrypt_in & RX_MPDU_RES_STATUS_ICV_OK)) |
| decrypt_out |= RX_RES_STATUS_BAD_ICV_MIC; |
| else |
| decrypt_out |= RX_RES_STATUS_DECRYPT_OK; |
| break; |
| } |
| |
| D_RX("decrypt_in:0x%x decrypt_out = 0x%x\n", decrypt_in, decrypt_out); |
| |
| return decrypt_out; |
| } |
| |
| #define SMALL_PACKET_SIZE 256 |
| |
| static void |
| il4965_pass_packet_to_mac80211(struct il_priv *il, struct ieee80211_hdr *hdr, |
| u32 len, u32 ampdu_status, struct il_rx_buf *rxb, |
| struct ieee80211_rx_status *stats) |
| { |
| struct sk_buff *skb; |
| __le16 fc = hdr->frame_control; |
| |
| /* We only process data packets if the interface is open */ |
| if (unlikely(!il->is_open)) { |
| D_DROP("Dropping packet while interface is not open.\n"); |
| return; |
| } |
| |
| if (unlikely(test_bit(IL_STOP_REASON_PASSIVE, &il->stop_reason))) { |
| il_wake_queues_by_reason(il, IL_STOP_REASON_PASSIVE); |
| D_INFO("Woke queues - frame received on passive channel\n"); |
| } |
| |
| /* In case of HW accelerated crypto and bad decryption, drop */ |
| if (!il->cfg->mod_params->sw_crypto && |
| il_set_decrypted_flag(il, hdr, ampdu_status, stats)) |
| return; |
| |
| skb = dev_alloc_skb(SMALL_PACKET_SIZE); |
| if (!skb) { |
| IL_ERR("dev_alloc_skb failed\n"); |
| return; |
| } |
| |
| if (len <= SMALL_PACKET_SIZE) { |
| memcpy(skb_put(skb, len), hdr, len); |
| } else { |
| skb_add_rx_frag(skb, 0, rxb->page, (void *)hdr - rxb_addr(rxb), |
| len, PAGE_SIZE << il->hw_params.rx_page_order); |
| il->alloc_rxb_page--; |
| rxb->page = NULL; |
| } |
| |
| il_update_stats(il, false, fc, len); |
| memcpy(IEEE80211_SKB_RXCB(skb), stats, sizeof(*stats)); |
| |
| ieee80211_rx(il->hw, skb); |
| } |
| |
| /* Called for N_RX (legacy ABG frames), or |
| * N_RX_MPDU (HT high-throughput N frames). */ |
| static void |
| il4965_hdl_rx(struct il_priv *il, struct il_rx_buf *rxb) |
| { |
| struct ieee80211_hdr *header; |
| struct ieee80211_rx_status rx_status = {}; |
| struct il_rx_pkt *pkt = rxb_addr(rxb); |
| struct il_rx_phy_res *phy_res; |
| __le32 rx_pkt_status; |
| struct il_rx_mpdu_res_start *amsdu; |
| u32 len; |
| u32 ampdu_status; |
| u32 rate_n_flags; |
| |
| /** |
| * N_RX and N_RX_MPDU are handled differently. |
| * N_RX: physical layer info is in this buffer |
| * N_RX_MPDU: physical layer info was sent in separate |
| * command and cached in il->last_phy_res |
| * |
| * Here we set up local variables depending on which command is |
| * received. |
| */ |
| if (pkt->hdr.cmd == N_RX) { |
| phy_res = (struct il_rx_phy_res *)pkt->u.raw; |
| header = |
| (struct ieee80211_hdr *)(pkt->u.raw + sizeof(*phy_res) + |
| phy_res->cfg_phy_cnt); |
| |
| len = le16_to_cpu(phy_res->byte_count); |
| rx_pkt_status = |
| *(__le32 *) (pkt->u.raw + sizeof(*phy_res) + |
| phy_res->cfg_phy_cnt + len); |
| ampdu_status = le32_to_cpu(rx_pkt_status); |
| } else { |
| if (!il->_4965.last_phy_res_valid) { |
| IL_ERR("MPDU frame without cached PHY data\n"); |
| return; |
| } |
| phy_res = &il->_4965.last_phy_res; |
| amsdu = (struct il_rx_mpdu_res_start *)pkt->u.raw; |
| header = (struct ieee80211_hdr *)(pkt->u.raw + sizeof(*amsdu)); |
| len = le16_to_cpu(amsdu->byte_count); |
| rx_pkt_status = *(__le32 *) (pkt->u.raw + sizeof(*amsdu) + len); |
| ampdu_status = |
| il4965_translate_rx_status(il, le32_to_cpu(rx_pkt_status)); |
| } |
| |
| if ((unlikely(phy_res->cfg_phy_cnt > 20))) { |
| D_DROP("dsp size out of range [0,20]: %d\n", |
| phy_res->cfg_phy_cnt); |
| return; |
| } |
| |
| if (!(rx_pkt_status & RX_RES_STATUS_NO_CRC32_ERROR) || |
| !(rx_pkt_status & RX_RES_STATUS_NO_RXE_OVERFLOW)) { |
| D_RX("Bad CRC or FIFO: 0x%08X.\n", le32_to_cpu(rx_pkt_status)); |
| return; |
| } |
| |
| /* This will be used in several places later */ |
| rate_n_flags = le32_to_cpu(phy_res->rate_n_flags); |
| |
| /* rx_status carries information about the packet to mac80211 */ |
| rx_status.mactime = le64_to_cpu(phy_res->timestamp); |
| rx_status.band = |
| (phy_res-> |
| phy_flags & RX_RES_PHY_FLAGS_BAND_24_MSK) ? IEEE80211_BAND_2GHZ : |
| IEEE80211_BAND_5GHZ; |
| rx_status.freq = |
| ieee80211_channel_to_frequency(le16_to_cpu(phy_res->channel), |
| rx_status.band); |
| rx_status.rate_idx = |
| il4965_hwrate_to_mac80211_idx(rate_n_flags, rx_status.band); |
| rx_status.flag = 0; |
| |
| /* TSF isn't reliable. In order to allow smooth user experience, |
| * this W/A doesn't propagate it to the mac80211 */ |
| /*rx_status.flag |= RX_FLAG_MACTIME_START; */ |
| |
| il->ucode_beacon_time = le32_to_cpu(phy_res->beacon_time_stamp); |
| |
| /* Find max signal strength (dBm) among 3 antenna/receiver chains */ |
| rx_status.signal = il4965_calc_rssi(il, phy_res); |
| |
| D_STATS("Rssi %d, TSF %llu\n", rx_status.signal, |
| (unsigned long long)rx_status.mactime); |
| |
| /* |
| * "antenna number" |
| * |
| * It seems that the antenna field in the phy flags value |
| * is actually a bit field. This is undefined by radiotap, |
| * it wants an actual antenna number but I always get "7" |
| * for most legacy frames I receive indicating that the |
| * same frame was received on all three RX chains. |
| * |
| * I think this field should be removed in favor of a |
| * new 802.11n radiotap field "RX chains" that is defined |
| * as a bitmask. |
| */ |
| rx_status.antenna = |
| (le16_to_cpu(phy_res->phy_flags) & RX_RES_PHY_FLAGS_ANTENNA_MSK) >> |
| RX_RES_PHY_FLAGS_ANTENNA_POS; |
| |
| /* set the preamble flag if appropriate */ |
| if (phy_res->phy_flags & RX_RES_PHY_FLAGS_SHORT_PREAMBLE_MSK) |
| rx_status.flag |= RX_FLAG_SHORTPRE; |
| |
| /* Set up the HT phy flags */ |
| if (rate_n_flags & RATE_MCS_HT_MSK) |
| rx_status.flag |= RX_FLAG_HT; |
| if (rate_n_flags & RATE_MCS_HT40_MSK) |
| rx_status.flag |= RX_FLAG_40MHZ; |
| if (rate_n_flags & RATE_MCS_SGI_MSK) |
| rx_status.flag |= RX_FLAG_SHORT_GI; |
| |
| if (phy_res->phy_flags & RX_RES_PHY_FLAGS_AGG_MSK) { |
| /* We know which subframes of an A-MPDU belong |
| * together since we get a single PHY response |
| * from the firmware for all of them. |
| */ |
| |
| rx_status.flag |= RX_FLAG_AMPDU_DETAILS; |
| rx_status.ampdu_reference = il->_4965.ampdu_ref; |
| } |
| |
| il4965_pass_packet_to_mac80211(il, header, len, ampdu_status, rxb, |
| &rx_status); |
| } |
| |
| /* Cache phy data (Rx signal strength, etc) for HT frame (N_RX_PHY). |
| * This will be used later in il_hdl_rx() for N_RX_MPDU. */ |
| static void |
| il4965_hdl_rx_phy(struct il_priv *il, struct il_rx_buf *rxb) |
| { |
| struct il_rx_pkt *pkt = rxb_addr(rxb); |
| il->_4965.last_phy_res_valid = true; |
| il->_4965.ampdu_ref++; |
| memcpy(&il->_4965.last_phy_res, pkt->u.raw, |
| sizeof(struct il_rx_phy_res)); |
| } |
| |
| static int |
| il4965_get_channels_for_scan(struct il_priv *il, struct ieee80211_vif *vif, |
| enum ieee80211_band band, u8 is_active, |
| u8 n_probes, struct il_scan_channel *scan_ch) |
| { |
| struct ieee80211_channel *chan; |
| const struct ieee80211_supported_band *sband; |
| const struct il_channel_info *ch_info; |
| u16 passive_dwell = 0; |
| u16 active_dwell = 0; |
| int added, i; |
| u16 channel; |
| |
| sband = il_get_hw_mode(il, band); |
| if (!sband) |
| return 0; |
| |
| active_dwell = il_get_active_dwell_time(il, band, n_probes); |
| passive_dwell = il_get_passive_dwell_time(il, band, vif); |
| |
| if (passive_dwell <= active_dwell) |
| passive_dwell = active_dwell + 1; |
| |
| for (i = 0, added = 0; i < il->scan_request->n_channels; i++) { |
| chan = il->scan_request->channels[i]; |
| |
| if (chan->band != band) |
| continue; |
| |
| channel = chan->hw_value; |
| scan_ch->channel = cpu_to_le16(channel); |
| |
| ch_info = il_get_channel_info(il, band, channel); |
| if (!il_is_channel_valid(ch_info)) { |
| D_SCAN("Channel %d is INVALID for this band.\n", |
| channel); |
| continue; |
| } |
| |
| if (!is_active || il_is_channel_passive(ch_info) || |
| (chan->flags & IEEE80211_CHAN_NO_IR)) |
| scan_ch->type = SCAN_CHANNEL_TYPE_PASSIVE; |
| else |
| scan_ch->type = SCAN_CHANNEL_TYPE_ACTIVE; |
| |
| if (n_probes) |
| scan_ch->type |= IL_SCAN_PROBE_MASK(n_probes); |
| |
| scan_ch->active_dwell = cpu_to_le16(active_dwell); |
| scan_ch->passive_dwell = cpu_to_le16(passive_dwell); |
| |
| /* Set txpower levels to defaults */ |
| scan_ch->dsp_atten = 110; |
| |
| /* NOTE: if we were doing 6Mb OFDM for scans we'd use |
| * power level: |
| * scan_ch->tx_gain = ((1 << 5) | (2 << 3)) | 3; |
| */ |
| if (band == IEEE80211_BAND_5GHZ) |
| scan_ch->tx_gain = ((1 << 5) | (3 << 3)) | 3; |
| else |
| scan_ch->tx_gain = ((1 << 5) | (5 << 3)); |
| |
| D_SCAN("Scanning ch=%d prob=0x%X [%s %d]\n", channel, |
| le32_to_cpu(scan_ch->type), |
| (scan_ch-> |
| type & SCAN_CHANNEL_TYPE_ACTIVE) ? "ACTIVE" : "PASSIVE", |
| (scan_ch-> |
| type & SCAN_CHANNEL_TYPE_ACTIVE) ? active_dwell : |
| passive_dwell); |
| |
| scan_ch++; |
| added++; |
| } |
| |
| D_SCAN("total channels to scan %d\n", added); |
| return added; |
| } |
| |
| static void |
| il4965_toggle_tx_ant(struct il_priv *il, u8 *ant, u8 valid) |
| { |
| int i; |
| u8 ind = *ant; |
| |
| for (i = 0; i < RATE_ANT_NUM - 1; i++) { |
| ind = (ind + 1) < RATE_ANT_NUM ? ind + 1 : 0; |
| if (valid & BIT(ind)) { |
| *ant = ind; |
| return; |
| } |
| } |
| } |
| |
| int |
| il4965_request_scan(struct il_priv *il, struct ieee80211_vif *vif) |
| { |
| struct il_host_cmd cmd = { |
| .id = C_SCAN, |
| .len = sizeof(struct il_scan_cmd), |
| .flags = CMD_SIZE_HUGE, |
| }; |
| struct il_scan_cmd *scan; |
| u32 rate_flags = 0; |
| u16 cmd_len; |
| u16 rx_chain = 0; |
| enum ieee80211_band band; |
| u8 n_probes = 0; |
| u8 rx_ant = il->hw_params.valid_rx_ant; |
| u8 rate; |
| bool is_active = false; |
| int chan_mod; |
| u8 active_chains; |
| u8 scan_tx_antennas = il->hw_params.valid_tx_ant; |
| int ret; |
| |
| lockdep_assert_held(&il->mutex); |
| |
| if (!il->scan_cmd) { |
| il->scan_cmd = |
| kmalloc(sizeof(struct il_scan_cmd) + IL_MAX_SCAN_SIZE, |
| GFP_KERNEL); |
| if (!il->scan_cmd) { |
| D_SCAN("fail to allocate memory for scan\n"); |
| return -ENOMEM; |
| } |
| } |
| scan = il->scan_cmd; |
| memset(scan, 0, sizeof(struct il_scan_cmd) + IL_MAX_SCAN_SIZE); |
| |
| scan->quiet_plcp_th = IL_PLCP_QUIET_THRESH; |
| scan->quiet_time = IL_ACTIVE_QUIET_TIME; |
| |
| if (il_is_any_associated(il)) { |
| u16 interval; |
| u32 extra; |
| u32 suspend_time = 100; |
| u32 scan_suspend_time = 100; |
| |
| D_INFO("Scanning while associated...\n"); |
| interval = vif->bss_conf.beacon_int; |
| |
| scan->suspend_time = 0; |
| scan->max_out_time = cpu_to_le32(200 * 1024); |
| if (!interval) |
| interval = suspend_time; |
| |
| extra = (suspend_time / interval) << 22; |
| scan_suspend_time = |
| (extra | ((suspend_time % interval) * 1024)); |
| scan->suspend_time = cpu_to_le32(scan_suspend_time); |
| D_SCAN("suspend_time 0x%X beacon interval %d\n", |
| scan_suspend_time, interval); |
| } |
| |
| if (il->scan_request->n_ssids) { |
| int i, p = 0; |
| D_SCAN("Kicking off active scan\n"); |
| for (i = 0; i < il->scan_request->n_ssids; i++) { |
| /* always does wildcard anyway */ |
| if (!il->scan_request->ssids[i].ssid_len) |
| continue; |
| scan->direct_scan[p].id = WLAN_EID_SSID; |
| scan->direct_scan[p].len = |
| il->scan_request->ssids[i].ssid_len; |
| memcpy(scan->direct_scan[p].ssid, |
| il->scan_request->ssids[i].ssid, |
| il->scan_request->ssids[i].ssid_len); |
| n_probes++; |
| p++; |
| } |
| is_active = true; |
| } else |
| D_SCAN("Start passive scan.\n"); |
| |
| scan->tx_cmd.tx_flags = TX_CMD_FLG_SEQ_CTL_MSK; |
| scan->tx_cmd.sta_id = il->hw_params.bcast_id; |
| scan->tx_cmd.stop_time.life_time = TX_CMD_LIFE_TIME_INFINITE; |
| |
| switch (il->scan_band) { |
| case IEEE80211_BAND_2GHZ: |
| scan->flags = RXON_FLG_BAND_24G_MSK | RXON_FLG_AUTO_DETECT_MSK; |
| chan_mod = |
| le32_to_cpu(il->active.flags & RXON_FLG_CHANNEL_MODE_MSK) >> |
| RXON_FLG_CHANNEL_MODE_POS; |
| if (chan_mod == CHANNEL_MODE_PURE_40) { |
| rate = RATE_6M_PLCP; |
| } else { |
| rate = RATE_1M_PLCP; |
| rate_flags = RATE_MCS_CCK_MSK; |
| } |
| break; |
| case IEEE80211_BAND_5GHZ: |
| rate = RATE_6M_PLCP; |
| break; |
| default: |
| IL_WARN("Invalid scan band\n"); |
| return -EIO; |
| } |
| |
| /* |
| * If active scanning is requested but a certain channel is |
| * marked passive, we can do active scanning if we detect |
| * transmissions. |
| * |
| * There is an issue with some firmware versions that triggers |
| * a sysassert on a "good CRC threshold" of zero (== disabled), |
| * on a radar channel even though this means that we should NOT |
| * send probes. |
| * |
| * The "good CRC threshold" is the number of frames that we |
| * need to receive during our dwell time on a channel before |
| * sending out probes -- setting this to a huge value will |
| * mean we never reach it, but at the same time work around |
| * the aforementioned issue. Thus use IL_GOOD_CRC_TH_NEVER |
| * here instead of IL_GOOD_CRC_TH_DISABLED. |
| */ |
| scan->good_CRC_th = |
| is_active ? IL_GOOD_CRC_TH_DEFAULT : IL_GOOD_CRC_TH_NEVER; |
| |
| band = il->scan_band; |
| |
| if (il->cfg->scan_rx_antennas[band]) |
| rx_ant = il->cfg->scan_rx_antennas[band]; |
| |
| il4965_toggle_tx_ant(il, &il->scan_tx_ant[band], scan_tx_antennas); |
| rate_flags |= BIT(il->scan_tx_ant[band]) << RATE_MCS_ANT_POS; |
| scan->tx_cmd.rate_n_flags = cpu_to_le32(rate | rate_flags); |
| |
| /* In power save mode use one chain, otherwise use all chains */ |
| if (test_bit(S_POWER_PMI, &il->status)) { |
| /* rx_ant has been set to all valid chains previously */ |
| active_chains = |
| rx_ant & ((u8) (il->chain_noise_data.active_chains)); |
| if (!active_chains) |
| active_chains = rx_ant; |
| |
| D_SCAN("chain_noise_data.active_chains: %u\n", |
| il->chain_noise_data.active_chains); |
| |
| rx_ant = il4965_first_antenna(active_chains); |
| } |
| |
| /* MIMO is not used here, but value is required */ |
| rx_chain |= il->hw_params.valid_rx_ant << RXON_RX_CHAIN_VALID_POS; |
| rx_chain |= rx_ant << RXON_RX_CHAIN_FORCE_MIMO_SEL_POS; |
| rx_chain |= rx_ant << RXON_RX_CHAIN_FORCE_SEL_POS; |
| rx_chain |= 0x1 << RXON_RX_CHAIN_DRIVER_FORCE_POS; |
| scan->rx_chain = cpu_to_le16(rx_chain); |
| |
| cmd_len = |
| il_fill_probe_req(il, (struct ieee80211_mgmt *)scan->data, |
| vif->addr, il->scan_request->ie, |
| il->scan_request->ie_len, |
| IL_MAX_SCAN_SIZE - sizeof(*scan)); |
| scan->tx_cmd.len = cpu_to_le16(cmd_len); |
| |
| scan->filter_flags |= |
| (RXON_FILTER_ACCEPT_GRP_MSK | RXON_FILTER_BCON_AWARE_MSK); |
| |
| scan->channel_count = |
| il4965_get_channels_for_scan(il, vif, band, is_active, n_probes, |
| (void *)&scan->data[cmd_len]); |
| if (scan->channel_count == 0) { |
| D_SCAN("channel count %d\n", scan->channel_count); |
| return -EIO; |
| } |
| |
| cmd.len += |
| le16_to_cpu(scan->tx_cmd.len) + |
| scan->channel_count * sizeof(struct il_scan_channel); |
| cmd.data = scan; |
| scan->len = cpu_to_le16(cmd.len); |
| |
| set_bit(S_SCAN_HW, &il->status); |
| |
| ret = il_send_cmd_sync(il, &cmd); |
| if (ret) |
| clear_bit(S_SCAN_HW, &il->status); |
| |
| return ret; |
| } |
| |
| int |
| il4965_manage_ibss_station(struct il_priv *il, struct ieee80211_vif *vif, |
| bool add) |
| { |
| struct il_vif_priv *vif_priv = (void *)vif->drv_priv; |
| |
| if (add) |
| return il4965_add_bssid_station(il, vif->bss_conf.bssid, |
| &vif_priv->ibss_bssid_sta_id); |
| return il_remove_station(il, vif_priv->ibss_bssid_sta_id, |
| vif->bss_conf.bssid); |
| } |
| |
| void |
| il4965_free_tfds_in_queue(struct il_priv *il, int sta_id, int tid, int freed) |
| { |
| lockdep_assert_held(&il->sta_lock); |
| |
| if (il->stations[sta_id].tid[tid].tfds_in_queue >= freed) |
| il->stations[sta_id].tid[tid].tfds_in_queue -= freed; |
| else { |
| D_TX("free more than tfds_in_queue (%u:%d)\n", |
| il->stations[sta_id].tid[tid].tfds_in_queue, freed); |
| il->stations[sta_id].tid[tid].tfds_in_queue = 0; |
| } |
| } |
| |
| #define IL_TX_QUEUE_MSK 0xfffff |
| |
| static bool |
| il4965_is_single_rx_stream(struct il_priv *il) |
| { |
| return il->current_ht_config.smps == IEEE80211_SMPS_STATIC || |
| il->current_ht_config.single_chain_sufficient; |
| } |
| |
| #define IL_NUM_RX_CHAINS_MULTIPLE 3 |
| #define IL_NUM_RX_CHAINS_SINGLE 2 |
| #define IL_NUM_IDLE_CHAINS_DUAL 2 |
| #define IL_NUM_IDLE_CHAINS_SINGLE 1 |
| |
| /* |
| * Determine how many receiver/antenna chains to use. |
| * |
| * More provides better reception via diversity. Fewer saves power |
| * at the expense of throughput, but only when not in powersave to |
| * start with. |
| * |
| * MIMO (dual stream) requires at least 2, but works better with 3. |
| * This does not determine *which* chains to use, just how many. |
| */ |
| static int |
| il4965_get_active_rx_chain_count(struct il_priv *il) |
| { |
| /* # of Rx chains to use when expecting MIMO. */ |
| if (il4965_is_single_rx_stream(il)) |
| return IL_NUM_RX_CHAINS_SINGLE; |
| else |
| return IL_NUM_RX_CHAINS_MULTIPLE; |
| } |
| |
| /* |
| * When we are in power saving mode, unless device support spatial |
| * multiplexing power save, use the active count for rx chain count. |
| */ |
| static int |
| il4965_get_idle_rx_chain_count(struct il_priv *il, int active_cnt) |
| { |
| /* # Rx chains when idling, depending on SMPS mode */ |
| switch (il->current_ht_config.smps) { |
| case IEEE80211_SMPS_STATIC: |
| case IEEE80211_SMPS_DYNAMIC: |
| return IL_NUM_IDLE_CHAINS_SINGLE; |
| case IEEE80211_SMPS_OFF: |
| return active_cnt; |
| default: |
| WARN(1, "invalid SMPS mode %d", il->current_ht_config.smps); |
| return active_cnt; |
| } |
| } |
| |
| /* up to 4 chains */ |
| static u8 |
| il4965_count_chain_bitmap(u32 chain_bitmap) |
| { |
| u8 res; |
| res = (chain_bitmap & BIT(0)) >> 0; |
| res += (chain_bitmap & BIT(1)) >> 1; |
| res += (chain_bitmap & BIT(2)) >> 2; |
| res += (chain_bitmap & BIT(3)) >> 3; |
| return res; |
| } |
| |
| /** |
| * il4965_set_rxon_chain - Set up Rx chain usage in "staging" RXON image |
| * |
| * Selects how many and which Rx receivers/antennas/chains to use. |
| * This should not be used for scan command ... it puts data in wrong place. |
| */ |
| void |
| il4965_set_rxon_chain(struct il_priv *il) |
| { |
| bool is_single = il4965_is_single_rx_stream(il); |
| bool is_cam = !test_bit(S_POWER_PMI, &il->status); |
| u8 idle_rx_cnt, active_rx_cnt, valid_rx_cnt; |
| u32 active_chains; |
| u16 rx_chain; |
| |
| /* Tell uCode which antennas are actually connected. |
| * Before first association, we assume all antennas are connected. |
| * Just after first association, il4965_chain_noise_calibration() |
| * checks which antennas actually *are* connected. */ |
| if (il->chain_noise_data.active_chains) |
| active_chains = il->chain_noise_data.active_chains; |
| else |
| active_chains = il->hw_params.valid_rx_ant; |
| |
| rx_chain = active_chains << RXON_RX_CHAIN_VALID_POS; |
| |
| /* How many receivers should we use? */ |
| active_rx_cnt = il4965_get_active_rx_chain_count(il); |
| idle_rx_cnt = il4965_get_idle_rx_chain_count(il, active_rx_cnt); |
| |
| /* correct rx chain count according hw settings |
| * and chain noise calibration |
| */ |
| valid_rx_cnt = il4965_count_chain_bitmap(active_chains); |
| if (valid_rx_cnt < active_rx_cnt) |
| active_rx_cnt = valid_rx_cnt; |
| |
| if (valid_rx_cnt < idle_rx_cnt) |
| idle_rx_cnt = valid_rx_cnt; |
| |
| rx_chain |= active_rx_cnt << RXON_RX_CHAIN_MIMO_CNT_POS; |
| rx_chain |= idle_rx_cnt << RXON_RX_CHAIN_CNT_POS; |
| |
| il->staging.rx_chain = cpu_to_le16(rx_chain); |
| |
| if (!is_single && active_rx_cnt >= IL_NUM_RX_CHAINS_SINGLE && is_cam) |
| il->staging.rx_chain |= RXON_RX_CHAIN_MIMO_FORCE_MSK; |
| else |
| il->staging.rx_chain &= ~RXON_RX_CHAIN_MIMO_FORCE_MSK; |
| |
| D_ASSOC("rx_chain=0x%X active=%d idle=%d\n", il->staging.rx_chain, |
| active_rx_cnt, idle_rx_cnt); |
| |
| WARN_ON(active_rx_cnt == 0 || idle_rx_cnt == 0 || |
| active_rx_cnt < idle_rx_cnt); |
| } |
| |
| static const char * |
| il4965_get_fh_string(int cmd) |
| { |
| switch (cmd) { |
| IL_CMD(FH49_RSCSR_CHNL0_STTS_WPTR_REG); |
| IL_CMD(FH49_RSCSR_CHNL0_RBDCB_BASE_REG); |
| IL_CMD(FH49_RSCSR_CHNL0_WPTR); |
| IL_CMD(FH49_MEM_RCSR_CHNL0_CONFIG_REG); |
| IL_CMD(FH49_MEM_RSSR_SHARED_CTRL_REG); |
| IL_CMD(FH49_MEM_RSSR_RX_STATUS_REG); |
| IL_CMD(FH49_MEM_RSSR_RX_ENABLE_ERR_IRQ2DRV); |
| IL_CMD(FH49_TSSR_TX_STATUS_REG); |
| IL_CMD(FH49_TSSR_TX_ERROR_REG); |
| default: |
| return "UNKNOWN"; |
| } |
| } |
| |
| int |
| il4965_dump_fh(struct il_priv *il, char **buf, bool display) |
| { |
| int i; |
| #ifdef CONFIG_IWLEGACY_DEBUG |
| int pos = 0; |
| size_t bufsz = 0; |
| #endif |
| static const u32 fh_tbl[] = { |
| FH49_RSCSR_CHNL0_STTS_WPTR_REG, |
| FH49_RSCSR_CHNL0_RBDCB_BASE_REG, |
| FH49_RSCSR_CHNL0_WPTR, |
| FH49_MEM_RCSR_CHNL0_CONFIG_REG, |
| FH49_MEM_RSSR_SHARED_CTRL_REG, |
| FH49_MEM_RSSR_RX_STATUS_REG, |
| FH49_MEM_RSSR_RX_ENABLE_ERR_IRQ2DRV, |
| FH49_TSSR_TX_STATUS_REG, |
| FH49_TSSR_TX_ERROR_REG |
| }; |
| #ifdef CONFIG_IWLEGACY_DEBUG |
| if (display) { |
| bufsz = ARRAY_SIZE(fh_tbl) * 48 + 40; |
| *buf = kmalloc(bufsz, GFP_KERNEL); |
| if (!*buf) |
| return -ENOMEM; |
| pos += |
| scnprintf(*buf + pos, bufsz - pos, "FH register values:\n"); |
| for (i = 0; i < ARRAY_SIZE(fh_tbl); i++) { |
| pos += |
| scnprintf(*buf + pos, bufsz - pos, |
| " %34s: 0X%08x\n", |
| il4965_get_fh_string(fh_tbl[i]), |
| il_rd(il, fh_tbl[i])); |
| } |
| return pos; |
| } |
| #endif |
| IL_ERR("FH register values:\n"); |
| for (i = 0; i < ARRAY_SIZE(fh_tbl); i++) { |
| IL_ERR(" %34s: 0X%08x\n", il4965_get_fh_string(fh_tbl[i]), |
| il_rd(il, fh_tbl[i])); |
| } |
| return 0; |
| } |
| |
| static void |
| il4965_hdl_missed_beacon(struct il_priv *il, struct il_rx_buf *rxb) |
| { |
| struct il_rx_pkt *pkt = rxb_addr(rxb); |
| struct il_missed_beacon_notif *missed_beacon; |
| |
| missed_beacon = &pkt->u.missed_beacon; |
| if (le32_to_cpu(missed_beacon->consecutive_missed_beacons) > |
| il->missed_beacon_threshold) { |
| D_CALIB("missed bcn cnsq %d totl %d rcd %d expctd %d\n", |
| le32_to_cpu(missed_beacon->consecutive_missed_beacons), |
| le32_to_cpu(missed_beacon->total_missed_becons), |
| le32_to_cpu(missed_beacon->num_recvd_beacons), |
| le32_to_cpu(missed_beacon->num_expected_beacons)); |
| if (!test_bit(S_SCANNING, &il->status)) |
| il4965_init_sensitivity(il); |
| } |
| } |
| |
| /* Calculate noise level, based on measurements during network silence just |
| * before arriving beacon. This measurement can be done only if we know |
| * exactly when to expect beacons, therefore only when we're associated. */ |
| static void |
| il4965_rx_calc_noise(struct il_priv *il) |
| { |
| struct stats_rx_non_phy *rx_info; |
| int num_active_rx = 0; |
| int total_silence = 0; |
| int bcn_silence_a, bcn_silence_b, bcn_silence_c; |
| int last_rx_noise; |
| |
| rx_info = &(il->_4965.stats.rx.general); |
| bcn_silence_a = |
| le32_to_cpu(rx_info->beacon_silence_rssi_a) & IN_BAND_FILTER; |
| bcn_silence_b = |
| le32_to_cpu(rx_info->beacon_silence_rssi_b) & IN_BAND_FILTER; |
| bcn_silence_c = |
| le32_to_cpu(rx_info->beacon_silence_rssi_c) & IN_BAND_FILTER; |
| |
| if (bcn_silence_a) { |
| total_silence += bcn_silence_a; |
| num_active_rx++; |
| } |
| if (bcn_silence_b) { |
| total_silence += bcn_silence_b; |
| num_active_rx++; |
| } |
| if (bcn_silence_c) { |
| total_silence += bcn_silence_c; |
| num_active_rx++; |
| } |
| |
| /* Average among active antennas */ |
| if (num_active_rx) |
| last_rx_noise = (total_silence / num_active_rx) - 107; |
| else |
| last_rx_noise = IL_NOISE_MEAS_NOT_AVAILABLE; |
| |
| D_CALIB("inband silence a %u, b %u, c %u, dBm %d\n", bcn_silence_a, |
| bcn_silence_b, bcn_silence_c, last_rx_noise); |
| } |
| |
| #ifdef CONFIG_IWLEGACY_DEBUGFS |
| /* |
| * based on the assumption of all stats counter are in DWORD |
| * FIXME: This function is for debugging, do not deal with |
| * the case of counters roll-over. |
| */ |
| static void |
| il4965_accumulative_stats(struct il_priv *il, __le32 * stats) |
| { |
| int i, size; |
| __le32 *prev_stats; |
| u32 *accum_stats; |
| u32 *delta, *max_delta; |
| struct stats_general_common *general, *accum_general; |
| struct stats_tx *tx, *accum_tx; |
| |
| prev_stats = (__le32 *) &il->_4965.stats; |
| accum_stats = (u32 *) &il->_4965.accum_stats; |
| size = sizeof(struct il_notif_stats); |
| general = &il->_4965.stats.general.common; |
| accum_general = &il->_4965.accum_stats.general.common; |
| tx = &il->_4965.stats.tx; |
| accum_tx = &il->_4965.accum_stats.tx; |
| delta = (u32 *) &il->_4965.delta_stats; |
| max_delta = (u32 *) &il->_4965.max_delta; |
| |
| for (i = sizeof(__le32); i < size; |
| i += |
| sizeof(__le32), stats++, prev_stats++, delta++, max_delta++, |
| accum_stats++) { |
| if (le32_to_cpu(*stats) > le32_to_cpu(*prev_stats)) { |
| *delta = |
| (le32_to_cpu(*stats) - le32_to_cpu(*prev_stats)); |
| *accum_stats += *delta; |
| if (*delta > *max_delta) |
| *max_delta = *delta; |
| } |
| } |
| |
| /* reset accumulative stats for "no-counter" type stats */ |
| accum_general->temperature = general->temperature; |
| accum_general->ttl_timestamp = general->ttl_timestamp; |
| } |
| #endif |
| |
| static void |
| il4965_hdl_stats(struct il_priv *il, struct il_rx_buf *rxb) |
| { |
| const int recalib_seconds = 60; |
| bool change; |
| struct il_rx_pkt *pkt = rxb_addr(rxb); |
| |
| D_RX("Statistics notification received (%d vs %d).\n", |
| (int)sizeof(struct il_notif_stats), |
| le32_to_cpu(pkt->len_n_flags) & IL_RX_FRAME_SIZE_MSK); |
| |
| change = |
| ((il->_4965.stats.general.common.temperature != |
| pkt->u.stats.general.common.temperature) || |
| ((il->_4965.stats.flag & STATS_REPLY_FLG_HT40_MODE_MSK) != |
| (pkt->u.stats.flag & STATS_REPLY_FLG_HT40_MODE_MSK))); |
| #ifdef CONFIG_IWLEGACY_DEBUGFS |
| il4965_accumulative_stats(il, (__le32 *) &pkt->u.stats); |
| #endif |
| |
| /* TODO: reading some of stats is unneeded */ |
| memcpy(&il->_4965.stats, &pkt->u.stats, sizeof(il->_4965.stats)); |
| |
| set_bit(S_STATS, &il->status); |
| |
| /* |
| * Reschedule the stats timer to occur in recalib_seconds to ensure |
| * we get a thermal update even if the uCode doesn't give us one |
| */ |
| mod_timer(&il->stats_periodic, |
| jiffies + msecs_to_jiffies(recalib_seconds * 1000)); |
| |
| if (unlikely(!test_bit(S_SCANNING, &il->status)) && |
| (pkt->hdr.cmd == N_STATS)) { |
| il4965_rx_calc_noise(il); |
| queue_work(il->workqueue, &il->run_time_calib_work); |
| } |
| |
| if (change) |
| il4965_temperature_calib(il); |
| } |
| |
| static void |
| il4965_hdl_c_stats(struct il_priv *il, struct il_rx_buf *rxb) |
| { |
| struct il_rx_pkt *pkt = rxb_addr(rxb); |
| |
| if (le32_to_cpu(pkt->u.stats.flag) & UCODE_STATS_CLEAR_MSK) { |
| #ifdef CONFIG_IWLEGACY_DEBUGFS |
| memset(&il->_4965.accum_stats, 0, |
| sizeof(struct il_notif_stats)); |
| memset(&il->_4965.delta_stats, 0, |
| sizeof(struct il_notif_stats)); |
| memset(&il->_4965.max_delta, 0, sizeof(struct il_notif_stats)); |
| #endif |
| D_RX("Statistics have been cleared\n"); |
| } |
| il4965_hdl_stats(il, rxb); |
| } |
| |
| |
| /* |
| * mac80211 queues, ACs, hardware queues, FIFOs. |
| * |
| * Cf. http://wireless.kernel.org/en/developers/Documentation/mac80211/queues |
| * |
| * Mac80211 uses the following numbers, which we get as from it |
| * by way of skb_get_queue_mapping(skb): |
| * |
| * VO 0 |
| * VI 1 |
| * BE 2 |
| * BK 3 |
| * |
| * |
| * Regular (not A-MPDU) frames are put into hardware queues corresponding |
| * to the FIFOs, see comments in iwl-prph.h. Aggregated frames get their |
| * own queue per aggregation session (RA/TID combination), such queues are |
| * set up to map into FIFOs too, for which we need an AC->FIFO mapping. In |
| * order to map frames to the right queue, we also need an AC->hw queue |
| * mapping. This is implemented here. |
| * |
| * Due to the way hw queues are set up (by the hw specific modules like |
| * 4965.c), the AC->hw queue mapping is the identity |
| * mapping. |
| */ |
| |
| static const u8 tid_to_ac[] = { |
| IEEE80211_AC_BE, |
| IEEE80211_AC_BK, |
| IEEE80211_AC_BK, |
| IEEE80211_AC_BE, |
| IEEE80211_AC_VI, |
| IEEE80211_AC_VI, |
| IEEE80211_AC_VO, |
| IEEE80211_AC_VO |
| }; |
| |
| static inline int |
| il4965_get_ac_from_tid(u16 tid) |
| { |
| if (likely(tid < ARRAY_SIZE(tid_to_ac))) |
| return tid_to_ac[tid]; |
| |
| /* no support for TIDs 8-15 yet */ |
| return -EINVAL; |
| } |
| |
| static inline int |
| il4965_get_fifo_from_tid(u16 tid) |
| { |
| const u8 ac_to_fifo[] = { |
| IL_TX_FIFO_VO, |
| IL_TX_FIFO_VI, |
| IL_TX_FIFO_BE, |
| IL_TX_FIFO_BK, |
| }; |
| |
| if (likely(tid < ARRAY_SIZE(tid_to_ac))) |
| return ac_to_fifo[tid_to_ac[tid]]; |
| |
| /* no support for TIDs 8-15 yet */ |
| return -EINVAL; |
| } |
| |
| /* |
| * handle build C_TX command notification. |
| */ |
| static void |
| il4965_tx_cmd_build_basic(struct il_priv *il, struct sk_buff *skb, |
| struct il_tx_cmd *tx_cmd, |
| struct ieee80211_tx_info *info, |
| struct ieee80211_hdr *hdr, u8 std_id) |
| { |
| __le16 fc = hdr->frame_control; |
| __le32 tx_flags = tx_cmd->tx_flags; |
| |
| tx_cmd->stop_time.life_time = TX_CMD_LIFE_TIME_INFINITE; |
| if (!(info->flags & IEEE80211_TX_CTL_NO_ACK)) { |
| tx_flags |= TX_CMD_FLG_ACK_MSK; |
| if (ieee80211_is_mgmt(fc)) |
| tx_flags |= TX_CMD_FLG_SEQ_CTL_MSK; |
| if (ieee80211_is_probe_resp(fc) && |
| !(le16_to_cpu(hdr->seq_ctrl) & 0xf)) |
| tx_flags |= TX_CMD_FLG_TSF_MSK; |
| } else { |
| tx_flags &= (~TX_CMD_FLG_ACK_MSK); |
| tx_flags |= TX_CMD_FLG_SEQ_CTL_MSK; |
| } |
| |
| if (ieee80211_is_back_req(fc)) |
| tx_flags |= TX_CMD_FLG_ACK_MSK | TX_CMD_FLG_IMM_BA_RSP_MASK; |
| |
| tx_cmd->sta_id = std_id; |
| if (ieee80211_has_morefrags(fc)) |
| tx_flags |= TX_CMD_FLG_MORE_FRAG_MSK; |
| |
| if (ieee80211_is_data_qos(fc)) { |
| u8 *qc = ieee80211_get_qos_ctl(hdr); |
| tx_cmd->tid_tspec = qc[0] & 0xf; |
| tx_flags &= ~TX_CMD_FLG_SEQ_CTL_MSK; |
| } else { |
| tx_flags |= TX_CMD_FLG_SEQ_CTL_MSK; |
| } |
| |
| il_tx_cmd_protection(il, info, fc, &tx_flags); |
| |
| tx_flags &= ~(TX_CMD_FLG_ANT_SEL_MSK); |
| if (ieee80211_is_mgmt(fc)) { |
| if (ieee80211_is_assoc_req(fc) || ieee80211_is_reassoc_req(fc)) |
| tx_cmd->timeout.pm_frame_timeout = cpu_to_le16(3); |
| else |
| tx_cmd->timeout.pm_frame_timeout = cpu_to_le16(2); |
| } else { |
| tx_cmd->timeout.pm_frame_timeout = 0; |
| } |
| |
| tx_cmd->driver_txop = 0; |
| tx_cmd->tx_flags = tx_flags; |
| tx_cmd->next_frame_len = 0; |
| } |
| |
| static void |
| il4965_tx_cmd_build_rate(struct il_priv *il, |
| struct il_tx_cmd *tx_cmd, |
| struct ieee80211_tx_info *info, |
| struct ieee80211_sta *sta, |
| __le16 fc) |
| { |
| const u8 rts_retry_limit = 60; |
| u32 rate_flags; |
| int rate_idx; |
| u8 data_retry_limit; |
| u8 rate_plcp; |
| |
| /* Set retry limit on DATA packets and Probe Responses */ |
| if (ieee80211_is_probe_resp(fc)) |
| data_retry_limit = 3; |
| else |
| data_retry_limit = IL4965_DEFAULT_TX_RETRY; |
| tx_cmd->data_retry_limit = data_retry_limit; |
| /* Set retry limit on RTS packets */ |
| tx_cmd->rts_retry_limit = min(data_retry_limit, rts_retry_limit); |
| |
| /* DATA packets will use the uCode station table for rate/antenna |
| * selection */ |
| if (ieee80211_is_data(fc)) { |
| tx_cmd->initial_rate_idx = 0; |
| tx_cmd->tx_flags |= TX_CMD_FLG_STA_RATE_MSK; |
| return; |
| } |
| |
| /** |
| * If the current TX rate stored in mac80211 has the MCS bit set, it's |
| * not really a TX rate. Thus, we use the lowest supported rate for |
| * this band. Also use the lowest supported rate if the stored rate |
| * idx is invalid. |
| */ |
| rate_idx = info->control.rates[0].idx; |
| if ((info->control.rates[0].flags & IEEE80211_TX_RC_MCS) || rate_idx < 0 |
| || rate_idx > RATE_COUNT_LEGACY) |
| rate_idx = rate_lowest_index(&il->bands[info->band], sta); |
| /* For 5 GHZ band, remap mac80211 rate indices into driver indices */ |
| if (info->band == IEEE80211_BAND_5GHZ) |
| rate_idx += IL_FIRST_OFDM_RATE; |
| /* Get PLCP rate for tx_cmd->rate_n_flags */ |
| rate_plcp = il_rates[rate_idx].plcp; |
| /* Zero out flags for this packet */ |
| rate_flags = 0; |
| |
| /* Set CCK flag as needed */ |
| if (rate_idx >= IL_FIRST_CCK_RATE && rate_idx <= IL_LAST_CCK_RATE) |
| rate_flags |= RATE_MCS_CCK_MSK; |
| |
| /* Set up antennas */ |
| il4965_toggle_tx_ant(il, &il->mgmt_tx_ant, il->hw_params.valid_tx_ant); |
| rate_flags |= BIT(il->mgmt_tx_ant) << RATE_MCS_ANT_POS; |
| |
| /* Set the rate in the TX cmd */ |
| tx_cmd->rate_n_flags = cpu_to_le32(rate_plcp | rate_flags); |
| } |
| |
| static void |
| il4965_tx_cmd_build_hwcrypto(struct il_priv *il, struct ieee80211_tx_info *info, |
| struct il_tx_cmd *tx_cmd, struct sk_buff *skb_frag, |
| int sta_id) |
| { |
| struct ieee80211_key_conf *keyconf = info->control.hw_key; |
| |
| switch (keyconf->cipher) { |
| case WLAN_CIPHER_SUITE_CCMP: |
| tx_cmd->sec_ctl = TX_CMD_SEC_CCM; |
| memcpy(tx_cmd->key, keyconf->key, keyconf->keylen); |
| if (info->flags & IEEE80211_TX_CTL_AMPDU) |
| tx_cmd->tx_flags |= TX_CMD_FLG_AGG_CCMP_MSK; |
| D_TX("tx_cmd with AES hwcrypto\n"); |
| break; |
| |
| case WLAN_CIPHER_SUITE_TKIP: |
| tx_cmd->sec_ctl = TX_CMD_SEC_TKIP; |
| ieee80211_get_tkip_p2k(keyconf, skb_frag, tx_cmd->key); |
| D_TX("tx_cmd with tkip hwcrypto\n"); |
| break; |
| |
| case WLAN_CIPHER_SUITE_WEP104: |
| tx_cmd->sec_ctl |= TX_CMD_SEC_KEY128; |
| /* fall through */ |
| case WLAN_CIPHER_SUITE_WEP40: |
| tx_cmd->sec_ctl |= |
| (TX_CMD_SEC_WEP | (keyconf->keyidx & TX_CMD_SEC_MSK) << |
| TX_CMD_SEC_SHIFT); |
| |
| memcpy(&tx_cmd->key[3], keyconf->key, keyconf->keylen); |
| |
| D_TX("Configuring packet for WEP encryption " "with key %d\n", |
| keyconf->keyidx); |
| break; |
| |
| default: |
| IL_ERR("Unknown encode cipher %x\n", keyconf->cipher); |
| break; |
| } |
| } |
| |
| /* |
| * start C_TX command process |
| */ |
| int |
| il4965_tx_skb(struct il_priv *il, |
| struct ieee80211_sta *sta, |
| struct sk_buff *skb) |
| { |
| struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data; |
| struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); |
| struct il_station_priv *sta_priv = NULL; |
| struct il_tx_queue *txq; |
| struct il_queue *q; |
| struct il_device_cmd *out_cmd; |
| struct il_cmd_meta *out_meta; |
| struct il_tx_cmd *tx_cmd; |
| int txq_id; |
| dma_addr_t phys_addr; |
| dma_addr_t txcmd_phys; |
| dma_addr_t scratch_phys; |
| u16 len, firstlen, secondlen; |
| u16 seq_number = 0; |
| __le16 fc; |
| u8 hdr_len; |
| u8 sta_id; |
| u8 wait_write_ptr = 0; |
| u8 tid = 0; |
| u8 *qc = NULL; |
| unsigned long flags; |
| bool is_agg = false; |
| |
| spin_lock_irqsave(&il->lock, flags); |
| if (il_is_rfkill(il)) { |
| D_DROP("Dropping - RF KILL\n"); |
| goto drop_unlock; |
| } |
| |
| fc = hdr->frame_control; |
| |
| #ifdef CONFIG_IWLEGACY_DEBUG |
| if (ieee80211_is_auth(fc)) |
| D_TX("Sending AUTH frame\n"); |
| else if (ieee80211_is_assoc_req(fc)) |
| D_TX("Sending ASSOC frame\n"); |
| else if (ieee80211_is_reassoc_req(fc)) |
| D_TX("Sending REASSOC frame\n"); |
| #endif |
| |
| hdr_len = ieee80211_hdrlen(fc); |
| |
| /* For management frames use broadcast id to do not break aggregation */ |
| if (!ieee80211_is_data(fc)) |
| sta_id = il->hw_params.bcast_id; |
| else { |
| /* Find idx into station table for destination station */ |
| sta_id = il_sta_id_or_broadcast(il, sta); |
| |
| if (sta_id == IL_INVALID_STATION) { |
| D_DROP("Dropping - INVALID STATION: %pM\n", hdr->addr1); |
| goto drop_unlock; |
| } |
| } |
| |
| D_TX("station Id %d\n", sta_id); |
| |
| if (sta) |
| sta_priv = (void *)sta->drv_priv; |
| |
| if (sta_priv && sta_priv->asleep && |
| (info->flags & IEEE80211_TX_CTL_NO_PS_BUFFER)) { |
| /* |
| * This sends an asynchronous command to the device, |
| * but we can rely on it being processed before the |
| * next frame is processed -- and the next frame to |
| * this station is the one that will consume this |
| * counter. |
| * For now set the counter to just 1 since we do not |
| * support uAPSD yet. |
| */ |
| il4965_sta_modify_sleep_tx_count(il, sta_id, 1); |
| } |
| |
| /* FIXME: remove me ? */ |
| WARN_ON_ONCE(info->flags & IEEE80211_TX_CTL_SEND_AFTER_DTIM); |
| |
| /* Access category (AC) is also the queue number */ |
| txq_id = skb_get_queue_mapping(skb); |
| |
| /* irqs already disabled/saved above when locking il->lock */ |
| spin_lock(&il->sta_lock); |
| |
| if (ieee80211_is_data_qos(fc)) { |
| qc = ieee80211_get_qos_ctl(hdr); |
| tid = qc[0] & IEEE80211_QOS_CTL_TID_MASK; |
| if (WARN_ON_ONCE(tid >= MAX_TID_COUNT)) { |
| spin_unlock(&il->sta_lock); |
| goto drop_unlock; |
| } |
| seq_number = il->stations[sta_id].tid[tid].seq_number; |
| seq_number &= IEEE80211_SCTL_SEQ; |
| hdr->seq_ctrl = |
| hdr->seq_ctrl & cpu_to_le16(IEEE80211_SCTL_FRAG); |
| hdr->seq_ctrl |= cpu_to_le16(seq_number); |
| seq_number += 0x10; |
| /* aggregation is on for this <sta,tid> */ |
| if (info->flags & IEEE80211_TX_CTL_AMPDU && |
| il->stations[sta_id].tid[tid].agg.state == IL_AGG_ON) { |
| txq_id = il->stations[sta_id].tid[tid].agg.txq_id; |
| is_agg = true; |
| } |
| } |
| |
| txq = &il->txq[txq_id]; |
| q = &txq->q; |
| |
| if (unlikely(il_queue_space(q) < q->high_mark)) { |
| spin_unlock(&il->sta_lock); |
| goto drop_unlock; |
| } |
| |
| if (ieee80211_is_data_qos(fc)) { |
| il->stations[sta_id].tid[tid].tfds_in_queue++; |
| if (!ieee80211_has_morefrags(fc)) |
| il->stations[sta_id].tid[tid].seq_number = seq_number; |
| } |
| |
| spin_unlock(&il->sta_lock); |
| |
| txq->skbs[q->write_ptr] = skb; |
| |
| /* Set up first empty entry in queue's array of Tx/cmd buffers */ |
| out_cmd = txq->cmd[q->write_ptr]; |
| out_meta = &txq->meta[q->write_ptr]; |
| tx_cmd = &out_cmd->cmd.tx; |
| memset(&out_cmd->hdr, 0, sizeof(out_cmd->hdr)); |
| memset(tx_cmd, 0, sizeof(struct il_tx_cmd)); |
| |
| /* |
| * Set up the Tx-command (not MAC!) header. |
| * Store the chosen Tx queue and TFD idx within the sequence field; |
| * after Tx, uCode's Tx response will return this value so driver can |
| * locate the frame within the tx queue and do post-tx processing. |
| */ |
| out_cmd->hdr.cmd = C_TX; |
| out_cmd->hdr.sequence = |
| cpu_to_le16((u16) |
| (QUEUE_TO_SEQ(txq_id) | IDX_TO_SEQ(q->write_ptr))); |
| |
| /* Copy MAC header from skb into command buffer */ |
| memcpy(tx_cmd->hdr, hdr, hdr_len); |
| |
| /* Total # bytes to be transmitted */ |
| tx_cmd->len = cpu_to_le16((u16) skb->len); |
| |
| if (info->control.hw_key) |
| il4965_tx_cmd_build_hwcrypto(il, info, tx_cmd, skb, sta_id); |
| |
| /* TODO need this for burst mode later on */ |
| il4965_tx_cmd_build_basic(il, skb, tx_cmd, info, hdr, sta_id); |
| |
| il4965_tx_cmd_build_rate(il, tx_cmd, info, sta, fc); |
| |
| /* |
| * Use the first empty entry in this queue's command buffer array |
| * to contain the Tx command and MAC header concatenated together |
| * (payload data will be in another buffer). |
| * Size of this varies, due to varying MAC header length. |
| * If end is not dword aligned, we'll have 2 extra bytes at the end |
| * of the MAC header (device reads on dword boundaries). |
| * We'll tell device about this padding later. |
| */ |
| len = sizeof(struct il_tx_cmd) + sizeof(struct il_cmd_header) + hdr_len; |
| firstlen = (len + 3) & ~3; |
| |
| /* Tell NIC about any 2-byte padding after MAC header */ |
| if (firstlen != len) |
| tx_cmd->tx_flags |= TX_CMD_FLG_MH_PAD_MSK; |
| |
| /* Physical address of this Tx command's header (not MAC header!), |
| * within command buffer array. */ |
| txcmd_phys = |
| pci_map_single(il->pci_dev, &out_cmd->hdr, firstlen, |
| PCI_DMA_BIDIRECTIONAL); |
| if (unlikely(pci_dma_mapping_error(il->pci_dev, txcmd_phys))) |
| goto drop_unlock; |
| |
| /* Set up TFD's 2nd entry to point directly to remainder of skb, |
| * if any (802.11 null frames have no payload). */ |
| secondlen = skb->len - hdr_len; |
| if (secondlen > 0) { |
| phys_addr = |
| pci_map_single(il->pci_dev, skb->data + hdr_len, secondlen, |
| PCI_DMA_TODEVICE); |
| if (unlikely(pci_dma_mapping_error(il->pci_dev, phys_addr))) |
| goto drop_unlock; |
| } |
| |
| /* Add buffer containing Tx command and MAC(!) header to TFD's |
| * first entry */ |
| il->ops->txq_attach_buf_to_tfd(il, txq, txcmd_phys, firstlen, 1, 0); |
| dma_unmap_addr_set(out_meta, mapping, txcmd_phys); |
| dma_unmap_len_set(out_meta, len, firstlen); |
| if (secondlen) |
| il->ops->txq_attach_buf_to_tfd(il, txq, phys_addr, secondlen, |
| 0, 0); |
| |
| if (!ieee80211_has_morefrags(hdr->frame_control)) { |
| txq->need_update = 1; |
| } else { |
| wait_write_ptr = 1; |
| txq->need_update = 0; |
| } |
| |
| scratch_phys = |
| txcmd_phys + sizeof(struct il_cmd_header) + |
| offsetof(struct il_tx_cmd, scratch); |
| |
| /* take back ownership of DMA buffer to enable update */ |
| pci_dma_sync_single_for_cpu(il->pci_dev, txcmd_phys, firstlen, |
| PCI_DMA_BIDIRECTIONAL); |
| tx_cmd->dram_lsb_ptr = cpu_to_le32(scratch_phys); |
| tx_cmd->dram_msb_ptr = il_get_dma_hi_addr(scratch_phys); |
| |
| il_update_stats(il, true, fc, skb->len); |
| |
| D_TX("sequence nr = 0X%x\n", le16_to_cpu(out_cmd->hdr.sequence)); |
| D_TX("tx_flags = 0X%x\n", le32_to_cpu(tx_cmd->tx_flags)); |
| il_print_hex_dump(il, IL_DL_TX, (u8 *) tx_cmd, sizeof(*tx_cmd)); |
| il_print_hex_dump(il, IL_DL_TX, (u8 *) tx_cmd->hdr, hdr_len); |
| |
| /* Set up entry for this TFD in Tx byte-count array */ |
| if (info->flags & IEEE80211_TX_CTL_AMPDU) |
| il->ops->txq_update_byte_cnt_tbl(il, txq, le16_to_cpu(tx_cmd->len)); |
| |
| pci_dma_sync_single_for_device(il->pci_dev, txcmd_phys, firstlen, |
| PCI_DMA_BIDIRECTIONAL); |
| |
| /* Tell device the write idx *just past* this latest filled TFD */ |
| q->write_ptr = il_queue_inc_wrap(q->write_ptr, q->n_bd); |
| il_txq_update_write_ptr(il, txq); |
| spin_unlock_irqrestore(&il->lock, flags); |
| |
| /* |
| * At this point the frame is "transmitted" successfully |
| * and we will get a TX status notification eventually, |
| * regardless of the value of ret. "ret" only indicates |
| * whether or not we should update the write pointer. |
| */ |
| |
| /* |
| * Avoid atomic ops if it isn't an associated client. |
| * Also, if this is a packet for aggregation, don't |
| * increase the counter because the ucode will stop |
| * aggregation queues when their respective station |
| * goes to sleep. |
| */ |
| if (sta_priv && sta_priv->client && !is_agg) |
| atomic_inc(&sta_priv->pending_frames); |
| |
| if (il_queue_space(q) < q->high_mark && il->mac80211_registered) { |
| if (wait_write_ptr) { |
| spin_lock_irqsave(&il->lock, flags); |
| txq->need_update = 1; |
| il_txq_update_write_ptr(il, txq); |
| spin_unlock_irqrestore(&il->lock, flags); |
| } else { |
| il_stop_queue(il, txq); |
| } |
| } |
| |
| return 0; |
| |
| drop_unlock: |
| spin_unlock_irqrestore(&il->lock, flags); |
| return -1; |
| } |
| |
| static inline int |
| il4965_alloc_dma_ptr(struct il_priv *il, struct il_dma_ptr *ptr, size_t size) |
| { |
| ptr->addr = dma_alloc_coherent(&il->pci_dev->dev, size, &ptr->dma, |
| GFP_KERNEL); |
| if (!ptr->addr) |
| return -ENOMEM; |
| ptr->size = size; |
| return 0; |
| } |
| |
| static inline void |
| il4965_free_dma_ptr(struct il_priv *il, struct il_dma_ptr *ptr) |
| { |
| if (unlikely(!ptr->addr)) |
| return; |
| |
| dma_free_coherent(&il->pci_dev->dev, ptr->size, ptr->addr, ptr->dma); |
| memset(ptr, 0, sizeof(*ptr)); |
| } |
| |
| /** |
| * il4965_hw_txq_ctx_free - Free TXQ Context |
| * |
| * Destroy all TX DMA queues and structures |
| */ |
| void |
| il4965_hw_txq_ctx_free(struct il_priv *il) |
| { |
| int txq_id; |
| |
| /* Tx queues */ |
| if (il->txq) { |
| for (txq_id = 0; txq_id < il->hw_params.max_txq_num; txq_id++) |
| if (txq_id == il->cmd_queue) |
| il_cmd_queue_free(il); |
| else |
| il_tx_queue_free(il, txq_id); |
| } |
| il4965_free_dma_ptr(il, &il->kw); |
| |
| il4965_free_dma_ptr(il, &il->scd_bc_tbls); |
| |
| /* free tx queue structure */ |
| il_free_txq_mem(il); |
| } |
| |
| /** |
| * il4965_txq_ctx_alloc - allocate TX queue context |
| * Allocate all Tx DMA structures and initialize them |
| * |
| * @param il |
| * @return error code |
| */ |
| int |
| il4965_txq_ctx_alloc(struct il_priv *il) |
| { |
| int ret, txq_id; |
| unsigned long flags; |
| |
| /* Free all tx/cmd queues and keep-warm buffer */ |
| il4965_hw_txq_ctx_free(il); |
| |
| ret = |
| il4965_alloc_dma_ptr(il, &il->scd_bc_tbls, |
| il->hw_params.scd_bc_tbls_size); |
| if (ret) { |
| IL_ERR("Scheduler BC Table allocation failed\n"); |
| goto error_bc_tbls; |
| } |
| /* Alloc keep-warm buffer */ |
| ret = il4965_alloc_dma_ptr(il, &il->kw, IL_KW_SIZE); |
| if (ret) { |
| IL_ERR("Keep Warm allocation failed\n"); |
| goto error_kw; |
| } |
| |
| /* allocate tx queue structure */ |
| ret = il_alloc_txq_mem(il); |
| if (ret) |
| goto error; |
| |
| spin_lock_irqsave(&il->lock, flags); |
| |
| /* Turn off all Tx DMA fifos */ |
| il4965_txq_set_sched(il, 0); |
| |
| /* Tell NIC where to find the "keep warm" buffer */ |
| il_wr(il, FH49_KW_MEM_ADDR_REG, il->kw.dma >> 4); |
| |
| spin_unlock_irqrestore(&il->lock, flags); |
| |
| /* Alloc and init all Tx queues, including the command queue (#4/#9) */ |
| for (txq_id = 0; txq_id < il->hw_params.max_txq_num; txq_id++) { |
| ret = il_tx_queue_init(il, txq_id); |
| if (ret) { |
| IL_ERR("Tx %d queue init failed\n", txq_id); |
| goto error; |
| } |
| } |
| |
| return ret; |
| |
| error: |
| il4965_hw_txq_ctx_free(il); |
| il4965_free_dma_ptr(il, &il->kw); |
| error_kw: |
| il4965_free_dma_ptr(il, &il->scd_bc_tbls); |
| error_bc_tbls: |
| return ret; |
| } |
| |
| void |
| il4965_txq_ctx_reset(struct il_priv *il) |
| { |
| int txq_id; |
| unsigned long flags; |
| |
| spin_lock_irqsave(&il->lock, flags); |
| |
| /* Turn off all Tx DMA fifos */ |
| il4965_txq_set_sched(il, 0); |
| /* Tell NIC where to find the "keep warm" buffer */ |
| il_wr(il, FH49_KW_MEM_ADDR_REG, il->kw.dma >> 4); |
| |
| spin_unlock_irqrestore(&il->lock, flags); |
| |
| /* Alloc and init all Tx queues, including the command queue (#4) */ |
| for (txq_id = 0; txq_id < il->hw_params.max_txq_num; txq_id++) |
| il_tx_queue_reset(il, txq_id); |
| } |
| |
| static void |
| il4965_txq_ctx_unmap(struct il_priv *il) |
| { |
| int txq_id; |
| |
| if (!il->txq) |
| return; |
| |
| /* Unmap DMA from host system and free skb's */ |
| for (txq_id = 0; txq_id < il->hw_params.max_txq_num; txq_id++) |
| if (txq_id == il->cmd_queue) |
| il_cmd_queue_unmap(il); |
| else |
| il_tx_queue_unmap(il, txq_id); |
| } |
| |
| /** |
| * il4965_txq_ctx_stop - Stop all Tx DMA channels |
| */ |
| void |
| il4965_txq_ctx_stop(struct il_priv *il) |
| { |
| int ch, ret; |
| |
| _il_wr_prph(il, IL49_SCD_TXFACT, 0); |
| |
| /* Stop each Tx DMA channel, and wait for it to be idle */ |
| for (ch = 0; ch < il->hw_params.dma_chnl_num; ch++) { |
| _il_wr(il, FH49_TCSR_CHNL_TX_CONFIG_REG(ch), 0x0); |
| ret = |
| _il_poll_bit(il, FH49_TSSR_TX_STATUS_REG, |
| FH49_TSSR_TX_STATUS_REG_MSK_CHNL_IDLE(ch), |
| FH49_TSSR_TX_STATUS_REG_MSK_CHNL_IDLE(ch), |
| 1000); |
| if (ret < 0) |
| IL_ERR("Timeout stopping DMA channel %d [0x%08x]", |
| ch, _il_rd(il, FH49_TSSR_TX_STATUS_REG)); |
| } |
| } |
| |
| /* |
| * Find first available (lowest unused) Tx Queue, mark it "active". |
| * Called only when finding queue for aggregation. |
| * Should never return anything < 7, because they should already |
| * be in use as EDCA AC (0-3), Command (4), reserved (5, 6) |
| */ |
| static int |
| il4965_txq_ctx_activate_free(struct il_priv *il) |
| { |
| int txq_id; |
| |
| for (txq_id = 0; txq_id < il->hw_params.max_txq_num; txq_id++) |
| if (!test_and_set_bit(txq_id, &il->txq_ctx_active_msk)) |
| return txq_id; |
| return -1; |
| } |
| |
| /** |
| * il4965_tx_queue_stop_scheduler - Stop queue, but keep configuration |
| */ |
| static void |
| il4965_tx_queue_stop_scheduler(struct il_priv *il, u16 txq_id) |
| { |
| /* Simply stop the queue, but don't change any configuration; |
| * the SCD_ACT_EN bit is the write-enable mask for the ACTIVE bit. */ |
| il_wr_prph(il, IL49_SCD_QUEUE_STATUS_BITS(txq_id), |
| (0 << IL49_SCD_QUEUE_STTS_REG_POS_ACTIVE) | |
| (1 << IL49_SCD_QUEUE_STTS_REG_POS_SCD_ACT_EN)); |
| } |
| |
| /** |
| * il4965_tx_queue_set_q2ratid - Map unique receiver/tid combination to a queue |
| */ |
| static int |
| il4965_tx_queue_set_q2ratid(struct il_priv *il, u16 ra_tid, u16 txq_id) |
| { |
| u32 tbl_dw_addr; |
| u32 tbl_dw; |
| u16 scd_q2ratid; |
| |
| scd_q2ratid = ra_tid & IL_SCD_QUEUE_RA_TID_MAP_RATID_MSK; |
| |
| tbl_dw_addr = |
| il->scd_base_addr + IL49_SCD_TRANSLATE_TBL_OFFSET_QUEUE(txq_id); |
| |
| tbl_dw = il_read_targ_mem(il, tbl_dw_addr); |
| |
| if (txq_id & 0x1) |
| tbl_dw = (scd_q2ratid << 16) | (tbl_dw & 0x0000FFFF); |
| else |
| tbl_dw = scd_q2ratid | (tbl_dw & 0xFFFF0000); |
| |
| il_write_targ_mem(il, tbl_dw_addr, tbl_dw); |
| |
| return 0; |
| } |
| |
| /** |
| * il4965_tx_queue_agg_enable - Set up & enable aggregation for selected queue |
| * |
| * NOTE: txq_id must be greater than IL49_FIRST_AMPDU_QUEUE, |
| * i.e. it must be one of the higher queues used for aggregation |
| */ |
| static int |
| il4965_txq_agg_enable(struct il_priv *il, int txq_id, int tx_fifo, int sta_id, |
| int tid, u16 ssn_idx) |
| { |
| unsigned long flags; |
| u16 ra_tid; |
| int ret; |
| |
| if ((IL49_FIRST_AMPDU_QUEUE > txq_id) || |
| (IL49_FIRST_AMPDU_QUEUE + |
| il->cfg->num_of_ampdu_queues <= txq_id)) { |
| IL_WARN("queue number out of range: %d, must be %d to %d\n", |
| txq_id, IL49_FIRST_AMPDU_QUEUE, |
| IL49_FIRST_AMPDU_QUEUE + |
| il->cfg->num_of_ampdu_queues - 1); |
| return -EINVAL; |
| } |
| |
| ra_tid = BUILD_RAxTID(sta_id, tid); |
| |
| /* Modify device's station table to Tx this TID */ |
| ret = il4965_sta_tx_modify_enable_tid(il, sta_id, tid); |
| if (ret) |
| return ret; |
| |
| spin_lock_irqsave(&il->lock, flags); |
| |
| /* Stop this Tx queue before configuring it */ |
| il4965_tx_queue_stop_scheduler(il, txq_id); |
| |
| /* Map receiver-address / traffic-ID to this queue */ |
| il4965_tx_queue_set_q2ratid(il, ra_tid, txq_id); |
| |
| /* Set this queue as a chain-building queue */ |
| il_set_bits_prph(il, IL49_SCD_QUEUECHAIN_SEL, (1 << txq_id)); |
| |
| /* Place first TFD at idx corresponding to start sequence number. |
| * Assumes that ssn_idx is valid (!= 0xFFF) */ |
| il->txq[txq_id].q.read_ptr = (ssn_idx & 0xff); |
| il->txq[txq_id].q.write_ptr = (ssn_idx & 0xff); |
| il4965_set_wr_ptrs(il, txq_id, ssn_idx); |
| |
| /* Set up Tx win size and frame limit for this queue */ |
| il_write_targ_mem(il, |
| il->scd_base_addr + |
| IL49_SCD_CONTEXT_QUEUE_OFFSET(txq_id), |
| (SCD_WIN_SIZE << IL49_SCD_QUEUE_CTX_REG1_WIN_SIZE_POS) |
| & IL49_SCD_QUEUE_CTX_REG1_WIN_SIZE_MSK); |
| |
| il_write_targ_mem(il, |
| il->scd_base_addr + |
| IL49_SCD_CONTEXT_QUEUE_OFFSET(txq_id) + sizeof(u32), |
| (SCD_FRAME_LIMIT << |
| IL49_SCD_QUEUE_CTX_REG2_FRAME_LIMIT_POS) & |
| IL49_SCD_QUEUE_CTX_REG2_FRAME_LIMIT_MSK); |
| |
| il_set_bits_prph(il, IL49_SCD_INTERRUPT_MASK, (1 << txq_id)); |
| |
| /* Set up Status area in SRAM, map to Tx DMA/FIFO, activate the queue */ |
| il4965_tx_queue_set_status(il, &il->txq[txq_id], tx_fifo, 1); |
| |
| spin_unlock_irqrestore(&il->lock, flags); |
| |
| return 0; |
| } |
| |
| int |
| il4965_tx_agg_start(struct il_priv *il, struct ieee80211_vif *vif, |
| struct ieee80211_sta *sta, u16 tid, u16 * ssn) |
| { |
| int sta_id; |
| int tx_fifo; |
| int txq_id; |
| int ret; |
| unsigned long flags; |
| struct il_tid_data *tid_data; |
| |
| /* FIXME: warning if tx fifo not found ? */ |
| tx_fifo = il4965_get_fifo_from_tid(tid); |
| if (unlikely(tx_fifo < 0)) |
| return tx_fifo; |
| |
| D_HT("%s on ra = %pM tid = %d\n", __func__, sta->addr, tid); |
| |
| sta_id = il_sta_id(sta); |
| if (sta_id == IL_INVALID_STATION) { |
| IL_ERR("Start AGG on invalid station\n"); |
| return -ENXIO; |
| } |
| if (unlikely(tid >= MAX_TID_COUNT)) |
| return -EINVAL; |
| |
| if (il->stations[sta_id].tid[tid].agg.state != IL_AGG_OFF) { |
| IL_ERR("Start AGG when state is not IL_AGG_OFF !\n"); |
| return -ENXIO; |
| } |
| |
| txq_id = il4965_txq_ctx_activate_free(il); |
| if (txq_id == -1) { |
| IL_ERR("No free aggregation queue available\n"); |
| return -ENXIO; |
| } |
| |
| spin_lock_irqsave(&il->sta_lock, flags); |
| tid_data = &il->stations[sta_id].tid[tid]; |
| *ssn = IEEE80211_SEQ_TO_SN(tid_data->seq_number); |
| tid_data->agg.txq_id = txq_id; |
| il_set_swq_id(&il->txq[txq_id], il4965_get_ac_from_tid(tid), txq_id); |
| spin_unlock_irqrestore(&il->sta_lock, flags); |
| |
| ret = il4965_txq_agg_enable(il, txq_id, tx_fifo, sta_id, tid, *ssn); |
| if (ret) |
| return ret; |
| |
| spin_lock_irqsave(&il->sta_lock, flags); |
| tid_data = &il->stations[sta_id].tid[tid]; |
| if (tid_data->tfds_in_queue == 0) { |
| D_HT("HW queue is empty\n"); |
| tid_data->agg.state = IL_AGG_ON; |
| ieee80211_start_tx_ba_cb_irqsafe(vif, sta->addr, tid); |
| } else { |
| D_HT("HW queue is NOT empty: %d packets in HW queue\n", |
| tid_data->tfds_in_queue); |
| tid_data->agg.state = IL_EMPTYING_HW_QUEUE_ADDBA; |
| } |
| spin_unlock_irqrestore(&il->sta_lock, flags); |
| return ret; |
| } |
| |
| /** |
| * txq_id must be greater than IL49_FIRST_AMPDU_QUEUE |
| * il->lock must be held by the caller |
| */ |
| static int |
| il4965_txq_agg_disable(struct il_priv *il, u16 txq_id, u16 ssn_idx, u8 tx_fifo) |
| { |
| if ((IL49_FIRST_AMPDU_QUEUE > txq_id) || |
| (IL49_FIRST_AMPDU_QUEUE + |
| il->cfg->num_of_ampdu_queues <= txq_id)) { |
| IL_WARN("queue number out of range: %d, must be %d to %d\n", |
| txq_id, IL49_FIRST_AMPDU_QUEUE, |
| IL49_FIRST_AMPDU_QUEUE + |
| il->cfg->num_of_ampdu_queues - 1); |
| return -EINVAL; |
| } |
| |
| il4965_tx_queue_stop_scheduler(il, txq_id); |
| |
| il_clear_bits_prph(il, IL49_SCD_QUEUECHAIN_SEL, (1 << txq_id)); |
| |
| il->txq[txq_id].q.read_ptr = (ssn_idx & 0xff); |
| il->txq[txq_id].q.write_ptr = (ssn_idx & 0xff); |
| /* supposes that ssn_idx is valid (!= 0xFFF) */ |
| il4965_set_wr_ptrs(il, txq_id, ssn_idx); |
| |
| il_clear_bits_prph(il, IL49_SCD_INTERRUPT_MASK, (1 << txq_id)); |
| il_txq_ctx_deactivate(il, txq_id); |
| il4965_tx_queue_set_status(il, &il->txq[txq_id], tx_fifo, 0); |
| |
| return 0; |
| } |
| |
| int |
| il4965_tx_agg_stop(struct il_priv *il, struct ieee80211_vif *vif, |
| struct ieee80211_sta *sta, u16 tid) |
| { |
| int tx_fifo_id, txq_id, sta_id, ssn; |
| struct il_tid_data *tid_data; |
| int write_ptr, read_ptr; |
| unsigned long flags; |
| |
| /* FIXME: warning if tx_fifo_id not found ? */ |
| tx_fifo_id = il4965_get_fifo_from_tid(tid); |
| if (unlikely(tx_fifo_id < 0)) |
| return tx_fifo_id; |
| |
| sta_id = il_sta_id(sta); |
| |
| if (sta_id == IL_INVALID_STATION) { |
| IL_ERR("Invalid station for AGG tid %d\n", tid); |
| return -ENXIO; |
| } |
| |
| spin_lock_irqsave(&il->sta_lock, flags); |
| |
| tid_data = &il->stations[sta_id].tid[tid]; |
| ssn = (tid_data->seq_number & IEEE80211_SCTL_SEQ) >> 4; |
| txq_id = tid_data->agg.txq_id; |
| |
| switch (il->stations[sta_id].tid[tid].agg.state) { |
| case IL_EMPTYING_HW_QUEUE_ADDBA: |
| /* |
| * This can happen if the peer stops aggregation |
| * again before we've had a chance to drain the |
| * queue we selected previously, i.e. before the |
| * session was really started completely. |
| */ |
| D_HT("AGG stop before setup done\n"); |
| goto turn_off; |
| case IL_AGG_ON: |
| break; |
| default: |
| IL_WARN("Stopping AGG while state not ON or starting\n"); |
| } |
| |
| write_ptr = il->txq[txq_id].q.write_ptr; |
| read_ptr = il->txq[txq_id].q.read_ptr; |
| |
| /* The queue is not empty */ |
| if (write_ptr != read_ptr) { |
| D_HT("Stopping a non empty AGG HW QUEUE\n"); |
| il->stations[sta_id].tid[tid].agg.state = |
| IL_EMPTYING_HW_QUEUE_DELBA; |
| spin_unlock_irqrestore(&il->sta_lock, flags); |
| return 0; |
| } |
| |
| D_HT("HW queue is empty\n"); |
| turn_off: |
| il->stations[sta_id].tid[tid].agg.state = IL_AGG_OFF; |
| |
| /* do not restore/save irqs */ |
| spin_unlock(&il->sta_lock); |
| spin_lock(&il->lock); |
| |
| /* |
| * the only reason this call can fail is queue number out of range, |
| * which can happen if uCode is reloaded and all the station |
| * information are lost. if it is outside the range, there is no need |
| * to deactivate the uCode queue, just return "success" to allow |
| * mac80211 to clean up it own data. |
| */ |
| il4965_txq_agg_disable(il, txq_id, ssn, tx_fifo_id); |
| spin_unlock_irqrestore(&il->lock, flags); |
| |
| ieee80211_stop_tx_ba_cb_irqsafe(vif, sta->addr, tid); |
| |
| return 0; |
| } |
| |
| int |
| il4965_txq_check_empty(struct il_priv *il, int sta_id, u8 tid, int txq_id) |
| { |
| struct il_queue *q = &il->txq[txq_id].q; |
| u8 *addr = il->stations[sta_id].sta.sta.addr; |
| struct il_tid_data *tid_data = &il->stations[sta_id].tid[tid]; |
| |
| lockdep_assert_held(&il->sta_lock); |
| |
| switch (il->stations[sta_id].tid[tid].agg.state) { |
| case IL_EMPTYING_HW_QUEUE_DELBA: |
| /* We are reclaiming the last packet of the */ |
| /* aggregated HW queue */ |
| if (txq_id == tid_data->agg.txq_id && |
| q->read_ptr == q->write_ptr) { |
| u16 ssn = IEEE80211_SEQ_TO_SN(tid_data->seq_number); |
| int tx_fifo = il4965_get_fifo_from_tid(tid); |
| D_HT("HW queue empty: continue DELBA flow\n"); |
| il4965_txq_agg_disable(il, txq_id, ssn, tx_fifo); |
| tid_data->agg.state = IL_AGG_OFF; |
| ieee80211_stop_tx_ba_cb_irqsafe(il->vif, addr, tid); |
| } |
| break; |
| case IL_EMPTYING_HW_QUEUE_ADDBA: |
| /* We are reclaiming the last packet of the queue */ |
| if (tid_data->tfds_in_queue == 0) { |
| D_HT("HW queue empty: continue ADDBA flow\n"); |
| tid_data->agg.state = IL_AGG_ON; |
| ieee80211_start_tx_ba_cb_irqsafe(il->vif, addr, tid); |
| } |
| break; |
| } |
| |
| return 0; |
| } |
| |
| static void |
| il4965_non_agg_tx_status(struct il_priv *il, const u8 *addr1) |
| { |
| struct ieee80211_sta *sta; |
| struct il_station_priv *sta_priv; |
| |
| rcu_read_lock(); |
| sta = ieee80211_find_sta(il->vif, addr1); |
| if (sta) { |
| sta_priv = (void *)sta->drv_priv; |
| /* avoid atomic ops if this isn't a client */ |
| if (sta_priv->client && |
| atomic_dec_return(&sta_priv->pending_frames) == 0) |
| ieee80211_sta_block_awake(il->hw, sta, false); |
| } |
| rcu_read_unlock(); |
| } |
| |
| static void |
| il4965_tx_status(struct il_priv *il, struct sk_buff *skb, bool is_agg) |
| { |
| struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data; |
| |
| if (!is_agg) |
| il4965_non_agg_tx_status(il, hdr->addr1); |
| |
| ieee80211_tx_status_irqsafe(il->hw, skb); |
| } |
| |
| int |
| il4965_tx_queue_reclaim(struct il_priv *il, int txq_id, int idx) |
| { |
| struct il_tx_queue *txq = &il->txq[txq_id]; |
| struct il_queue *q = &txq->q; |
| int nfreed = 0; |
| struct ieee80211_hdr *hdr; |
| struct sk_buff *skb; |
| |
| if (idx >= q->n_bd || il_queue_used(q, idx) == 0) { |
| IL_ERR("Read idx for DMA queue txq id (%d), idx %d, " |
| "is out of range [0-%d] %d %d.\n", txq_id, idx, q->n_bd, |
| q->write_ptr, q->read_ptr); |
| return 0; |
| } |
| |
| for (idx = il_queue_inc_wrap(idx, q->n_bd); q->read_ptr != idx; |
| q->read_ptr = il_queue_inc_wrap(q->read_ptr, q->n_bd)) { |
| |
| skb = txq->skbs[txq->q.read_ptr]; |
| |
| if (WARN_ON_ONCE(skb == NULL)) |
| continue; |
| |
| hdr = (struct ieee80211_hdr *) skb->data; |
| if (ieee80211_is_data_qos(hdr->frame_control)) |
| nfreed++; |
| |
| il4965_tx_status(il, skb, txq_id >= IL4965_FIRST_AMPDU_QUEUE); |
| |
| txq->skbs[txq->q.read_ptr] = NULL; |
| il->ops->txq_free_tfd(il, txq); |
| } |
| return nfreed; |
| } |
| |
| /** |
| * il4965_tx_status_reply_compressed_ba - Update tx status from block-ack |
| * |
| * Go through block-ack's bitmap of ACK'd frames, update driver's record of |
| * ACK vs. not. This gets sent to mac80211, then to rate scaling algo. |
| */ |
| static int |
| il4965_tx_status_reply_compressed_ba(struct il_priv *il, struct il_ht_agg *agg, |
| struct il_compressed_ba_resp *ba_resp) |
| { |
| int i, sh, ack; |
| u16 seq_ctl = le16_to_cpu(ba_resp->seq_ctl); |
| u16 scd_flow = le16_to_cpu(ba_resp->scd_flow); |
| int successes = 0; |
| struct ieee80211_tx_info *info; |
| u64 bitmap, sent_bitmap; |
| |
| if (unlikely(!agg->wait_for_ba)) { |
| if (unlikely(ba_resp->bitmap)) |
| IL_ERR("Received BA when not expected\n"); |
| return -EINVAL; |
| } |
| |
| /* Mark that the expected block-ack response arrived */ |
| agg->wait_for_ba = 0; |
| D_TX_REPLY("BA %d %d\n", agg->start_idx, ba_resp->seq_ctl); |
| |
| /* Calculate shift to align block-ack bits with our Tx win bits */ |
| sh = agg->start_idx - SEQ_TO_IDX(seq_ctl >> 4); |
| if (sh < 0) /* tbw something is wrong with indices */ |
| sh += 0x100; |
| |
| if (agg->frame_count > (64 - sh)) { |
| D_TX_REPLY("more frames than bitmap size"); |
| return -1; |
| } |
| |
| /* don't use 64-bit values for now */ |
| bitmap = le64_to_cpu(ba_resp->bitmap) >> sh; |
| |
| /* check for success or failure according to the |
| * transmitted bitmap and block-ack bitmap */ |
| sent_bitmap = bitmap & agg->bitmap; |
| |
| /* For each frame attempted in aggregation, |
| * update driver's record of tx frame's status. */ |
| i = 0; |
| while (sent_bitmap) { |
| ack = sent_bitmap & 1ULL; |
| successes += ack; |
| D_TX_REPLY("%s ON i=%d idx=%d raw=%d\n", ack ? "ACK" : "NACK", |
| i, (agg->start_idx + i) & 0xff, agg->start_idx + i); |
| sent_bitmap >>= 1; |
| ++i; |
| } |
| |
| D_TX_REPLY("Bitmap %llx\n", (unsigned long long)bitmap); |
| |
| info = IEEE80211_SKB_CB(il->txq[scd_flow].skbs[agg->start_idx]); |
| memset(&info->status, 0, sizeof(info->status)); |
| info->flags |= IEEE80211_TX_STAT_ACK; |
| info->flags |= IEEE80211_TX_STAT_AMPDU; |
| info->status.ampdu_ack_len = successes; |
| info->status.ampdu_len = agg->frame_count; |
| il4965_hwrate_to_tx_control(il, agg->rate_n_flags, info); |
| |
| return 0; |
| } |
| |
| static inline bool |
| il4965_is_tx_success(u32 status) |
| { |
| status &= TX_STATUS_MSK; |
| return (status == TX_STATUS_SUCCESS || status == TX_STATUS_DIRECT_DONE); |
| } |
| |
| static u8 |
| il4965_find_station(struct il_priv *il, const u8 *addr) |
| { |
| int i; |
| int start = 0; |
| int ret = IL_INVALID_STATION; |
| unsigned long flags; |
| |
| if (il->iw_mode == NL80211_IFTYPE_ADHOC) |
| start = IL_STA_ID; |
| |
| if (is_broadcast_ether_addr(addr)) |
| return il->hw_params.bcast_id; |
| |
| spin_lock_irqsave(&il->sta_lock, flags); |
| for (i = start; i < il->hw_params.max_stations; i++) |
| if (il->stations[i].used && |
| ether_addr_equal(il->stations[i].sta.sta.addr, addr)) { |
| ret = i; |
| goto out; |
| } |
| |
| D_ASSOC("can not find STA %pM total %d\n", addr, il->num_stations); |
| |
| out: |
| /* |
| * It may be possible that more commands interacting with stations |
| * arrive before we completed processing the adding of |
| * station |
| */ |
| if (ret != IL_INVALID_STATION && |
| (!(il->stations[ret].used & IL_STA_UCODE_ACTIVE) || |
| ((il->stations[ret].used & IL_STA_UCODE_ACTIVE) && |
| (il->stations[ret].used & IL_STA_UCODE_INPROGRESS)))) { |
| IL_ERR("Requested station info for sta %d before ready.\n", |
| ret); |
| ret = IL_INVALID_STATION; |
| } |
| spin_unlock_irqrestore(&il->sta_lock, flags); |
| return ret; |
| } |
| |
| static int |
| il4965_get_ra_sta_id(struct il_priv *il, struct ieee80211_hdr *hdr) |
| { |
| if (il->iw_mode == NL80211_IFTYPE_STATION) |
| return IL_AP_ID; |
| else { |
| u8 *da = ieee80211_get_DA(hdr); |
| |
| return il4965_find_station(il, da); |
| } |
| } |
| |
| static inline u32 |
| il4965_get_scd_ssn(struct il4965_tx_resp *tx_resp) |
| { |
| return le32_to_cpup(&tx_resp->u.status + |
| tx_resp->frame_count) & IEEE80211_MAX_SN; |
| } |
| |
| static inline u32 |
| il4965_tx_status_to_mac80211(u32 status) |
| { |
| status &= TX_STATUS_MSK; |
| |
| switch (status) { |
| case TX_STATUS_SUCCESS: |
| case TX_STATUS_DIRECT_DONE: |
| return IEEE80211_TX_STAT_ACK; |
| case TX_STATUS_FAIL_DEST_PS: |
| return IEEE80211_TX_STAT_TX_FILTERED; |
| default: |
| return 0; |
| } |
| } |
| |
| /** |
| * il4965_tx_status_reply_tx - Handle Tx response for frames in aggregation queue |
| */ |
| static int |
| il4965_tx_status_reply_tx(struct il_priv *il, struct il_ht_agg *agg, |
| struct il4965_tx_resp *tx_resp, int txq_id, |
| u16 start_idx) |
| { |
| u16 status; |
| struct agg_tx_status *frame_status = tx_resp->u.agg_status; |
| struct ieee80211_tx_info *info = NULL; |
| struct ieee80211_hdr *hdr = NULL; |
| u32 rate_n_flags = le32_to_cpu(tx_resp->rate_n_flags); |
| int i, sh, idx; |
| u16 seq; |
| if (agg->wait_for_ba) |
| D_TX_REPLY("got tx response w/o block-ack\n"); |
| |
| agg->frame_count = tx_resp->frame_count; |
| agg->start_idx = start_idx; |
| agg->rate_n_flags = rate_n_flags; |
| agg->bitmap = 0; |
| |
| /* num frames attempted by Tx command */ |
| if (agg->frame_count == 1) { |
| /* Only one frame was attempted; no block-ack will arrive */ |
| status = le16_to_cpu(frame_status[0].status); |
| idx = start_idx; |
| |
| D_TX_REPLY("FrameCnt = %d, StartIdx=%d idx=%d\n", |
| agg->frame_count, agg->start_idx, idx); |
| |
| info = IEEE80211_SKB_CB(il->txq[txq_id].skbs[idx]); |
| info->status.rates[0].count = tx_resp->failure_frame + 1; |
| info->flags &= ~IEEE80211_TX_CTL_AMPDU; |
| info->flags |= il4965_tx_status_to_mac80211(status); |
| il4965_hwrate_to_tx_control(il, rate_n_flags, info); |
| |
| D_TX_REPLY("1 Frame 0x%x failure :%d\n", status & 0xff, |
| tx_resp->failure_frame); |
| D_TX_REPLY("Rate Info rate_n_flags=%x\n", rate_n_flags); |
| |
| agg->wait_for_ba = 0; |
| } else { |
| /* Two or more frames were attempted; expect block-ack */ |
| u64 bitmap = 0; |
| int start = agg->start_idx; |
| struct sk_buff *skb; |
| |
| /* Construct bit-map of pending frames within Tx win */ |
| for (i = 0; i < agg->frame_count; i++) { |
| u16 sc; |
| status = le16_to_cpu(frame_status[i].status); |
| seq = le16_to_cpu(frame_status[i].sequence); |
| idx = SEQ_TO_IDX(seq); |
| txq_id = SEQ_TO_QUEUE(seq); |
| |
| if (status & |
| (AGG_TX_STATE_FEW_BYTES_MSK | |
| AGG_TX_STATE_ABORT_MSK)) |
| continue; |
| |
| D_TX_REPLY("FrameCnt = %d, txq_id=%d idx=%d\n", |
| agg->frame_count, txq_id, idx); |
| |
| skb = il->txq[txq_id].skbs[idx]; |
| if (WARN_ON_ONCE(skb == NULL)) |
| return -1; |
| hdr = (struct ieee80211_hdr *) skb->data; |
| |
| sc = le16_to_cpu(hdr->seq_ctrl); |
| if (idx != (IEEE80211_SEQ_TO_SN(sc) & 0xff)) { |
| IL_ERR("BUG_ON idx doesn't match seq control" |
| " idx=%d, seq_idx=%d, seq=%d\n", idx, |
| IEEE80211_SEQ_TO_SN(sc), hdr->seq_ctrl); |
| return -1; |
| } |
| |
| D_TX_REPLY("AGG Frame i=%d idx %d seq=%d\n", i, idx, |
| IEEE80211_SEQ_TO_SN(sc)); |
| |
| sh = idx - start; |
| if (sh > 64) { |
| sh = (start - idx) + 0xff; |
| bitmap = bitmap << sh; |
| sh = 0; |
| start = idx; |
| } else if (sh < -64) |
| sh = 0xff - (start - idx); |
| else if (sh < 0) { |
| sh = start - idx; |
| start = idx; |
| bitmap = bitmap << sh; |
| sh = 0; |
| } |
| bitmap |= 1ULL << sh; |
| D_TX_REPLY("start=%d bitmap=0x%llx\n", start, |
| (unsigned long long)bitmap); |
| } |
| |
| agg->bitmap = bitmap; |
| agg->start_idx = start; |
| D_TX_REPLY("Frames %d start_idx=%d bitmap=0x%llx\n", |
| agg->frame_count, agg->start_idx, |
| (unsigned long long)agg->bitmap); |
| |
| if (bitmap) |
| agg->wait_for_ba = 1; |
| } |
| return 0; |
| } |
| |
| /** |
| * il4965_hdl_tx - Handle standard (non-aggregation) Tx response |
| */ |
| static void |
| il4965_hdl_tx(struct il_priv *il, struct il_rx_buf *rxb) |
| { |
| struct il_rx_pkt *pkt = rxb_addr(rxb); |
| u16 sequence = le16_to_cpu(pkt->hdr.sequence); |
| int txq_id = SEQ_TO_QUEUE(sequence); |
| int idx = SEQ_TO_IDX(sequence); |
| struct il_tx_queue *txq = &il->txq[txq_id]; |
| struct sk_buff *skb; |
| struct ieee80211_hdr *hdr; |
| struct ieee80211_tx_info *info; |
| struct il4965_tx_resp *tx_resp = (void *)&pkt->u.raw[0]; |
| u32 status = le32_to_cpu(tx_resp->u.status); |
| int uninitialized_var(tid); |
| int sta_id; |
| int freed; |
| u8 *qc = NULL; |
| unsigned long flags; |
| |
| if (idx >= txq->q.n_bd || il_queue_used(&txq->q, idx) == 0) { |
| IL_ERR("Read idx for DMA queue txq_id (%d) idx %d " |
| "is out of range [0-%d] %d %d\n", txq_id, idx, |
| txq->q.n_bd, txq->q.write_ptr, txq->q.read_ptr); |
| return; |
| } |
| |
| txq->time_stamp = jiffies; |
| |
| skb = txq->skbs[txq->q.read_ptr]; |
| info = IEEE80211_SKB_CB(skb); |
| memset(&info->status, 0, sizeof(info->status)); |
| |
| hdr = (struct ieee80211_hdr *) skb->data; |
| if (ieee80211_is_data_qos(hdr->frame_control)) { |
| qc = ieee80211_get_qos_ctl(hdr); |
| tid = qc[0] & 0xf; |
| } |
| |
| sta_id = il4965_get_ra_sta_id(il, hdr); |
| if (txq->sched_retry && unlikely(sta_id == IL_INVALID_STATION)) { |
| IL_ERR("Station not known\n"); |
| return; |
| } |
| |
| /* |
| * Firmware will not transmit frame on passive channel, if it not yet |
| * received some valid frame on that channel. When this error happen |
| * we have to wait until firmware will unblock itself i.e. when we |
| * note received beacon or other frame. We unblock queues in |
| * il4965_pass_packet_to_mac80211 or in il_mac_bss_info_changed. |
| */ |
| if (unlikely((status & TX_STATUS_MSK) == TX_STATUS_FAIL_PASSIVE_NO_RX) && |
| il->iw_mode == NL80211_IFTYPE_STATION) { |
| il_stop_queues_by_reason(il, IL_STOP_REASON_PASSIVE); |
| D_INFO("Stopped queues - RX waiting on passive channel\n"); |
| } |
| |
| spin_lock_irqsave(&il->sta_lock, flags); |
| if (txq->sched_retry) { |
| const u32 scd_ssn = il4965_get_scd_ssn(tx_resp); |
| struct il_ht_agg *agg = NULL; |
| WARN_ON(!qc); |
| |
| agg = &il->stations[sta_id].tid[tid].agg; |
| |
| il4965_tx_status_reply_tx(il, agg, tx_resp, txq_id, idx); |
| |
| /* check if BAR is needed */ |
| if (tx_resp->frame_count == 1 && |
| !il4965_is_tx_success(status)) |
| info->flags |= IEEE80211_TX_STAT_AMPDU_NO_BACK; |
| |
| if (txq->q.read_ptr != (scd_ssn & 0xff)) { |
| idx = il_queue_dec_wrap(scd_ssn & 0xff, txq->q.n_bd); |
| D_TX_REPLY("Retry scheduler reclaim scd_ssn " |
| "%d idx %d\n", scd_ssn, idx); |
| freed = il4965_tx_queue_reclaim(il, txq_id, idx); |
| if (qc) |
| il4965_free_tfds_in_queue(il, sta_id, tid, |
| freed); |
| |
| if (il->mac80211_registered && |
| il_queue_space(&txq->q) > txq->q.low_mark && |
| agg->state != IL_EMPTYING_HW_QUEUE_DELBA) |
| il_wake_queue(il, txq); |
| } |
| } else { |
| info->status.rates[0].count = tx_resp->failure_frame + 1; |
| info->flags |= il4965_tx_status_to_mac80211(status); |
| il4965_hwrate_to_tx_control(il, |
| le32_to_cpu(tx_resp->rate_n_flags), |
| info); |
| |
| D_TX_REPLY("TXQ %d status %s (0x%08x) " |
| "rate_n_flags 0x%x retries %d\n", txq_id, |
| il4965_get_tx_fail_reason(status), status, |
| le32_to_cpu(tx_resp->rate_n_flags), |
| tx_resp->failure_frame); |
| |
| freed = il4965_tx_queue_reclaim(il, txq_id, idx); |
| if (qc && likely(sta_id != IL_INVALID_STATION)) |
| il4965_free_tfds_in_queue(il, sta_id, tid, freed); |
| else if (sta_id == IL_INVALID_STATION) |
| D_TX_REPLY("Station not known\n"); |
| |
| if (il->mac80211_registered && |
| il_queue_space(&txq->q) > txq->q.low_mark) |
| il_wake_queue(il, txq); |
| } |
| if (qc && likely(sta_id != IL_INVALID_STATION)) |
| il4965_txq_check_empty(il, sta_id, tid, txq_id); |
| |
| il4965_check_abort_status(il, tx_resp->frame_count, status); |
| |
| spin_unlock_irqrestore(&il->sta_lock, flags); |
| } |
| |
| /** |
| * translate ucode response to mac80211 tx status control values |
| */ |
| void |
| il4965_hwrate_to_tx_control(struct il_priv *il, u32 rate_n_flags, |
| struct ieee80211_tx_info *info) |
| { |
| struct ieee80211_tx_rate *r = &info->status.rates[0]; |
| |
| info->status.antenna = |
| ((rate_n_flags & RATE_MCS_ANT_ABC_MSK) >> RATE_MCS_ANT_POS); |
| if (rate_n_flags & RATE_MCS_HT_MSK) |
| r->flags |= IEEE80211_TX_RC_MCS; |
| if (rate_n_flags & RATE_MCS_GF_MSK) |
| r->flags |= IEEE80211_TX_RC_GREEN_FIELD; |
| if (rate_n_flags & RATE_MCS_HT40_MSK) |
| r->flags |= IEEE80211_TX_RC_40_MHZ_WIDTH; |
| if (rate_n_flags & RATE_MCS_DUP_MSK) |
| r->flags |= IEEE80211_TX_RC_DUP_DATA; |
| if (rate_n_flags & RATE_MCS_SGI_MSK) |
| r->flags |= IEEE80211_TX_RC_SHORT_GI; |
| r->idx = il4965_hwrate_to_mac80211_idx(rate_n_flags, info->band); |
| } |
| |
| /** |
| * il4965_hdl_compressed_ba - Handler for N_COMPRESSED_BA |
| * |
| * Handles block-acknowledge notification from device, which reports success |
| * of frames sent via aggregation. |
| */ |
| static void |
| il4965_hdl_compressed_ba(struct il_priv *il, struct il_rx_buf *rxb) |
| { |
| struct il_rx_pkt *pkt = rxb_addr(rxb); |
| struct il_compressed_ba_resp *ba_resp = &pkt->u.compressed_ba; |
| struct il_tx_queue *txq = NULL; |
| struct il_ht_agg *agg; |
| int idx; |
| int sta_id; |
| int tid; |
| unsigned long flags; |
| |
| /* "flow" corresponds to Tx queue */ |
| u16 scd_flow = le16_to_cpu(ba_resp->scd_flow); |
| |
| /* "ssn" is start of block-ack Tx win, corresponds to idx |
| * (in Tx queue's circular buffer) of first TFD/frame in win */ |
| u16 ba_resp_scd_ssn = le16_to_cpu(ba_resp->scd_ssn); |
| |
| if (scd_flow >= il->hw_params.max_txq_num) { |
| IL_ERR("BUG_ON scd_flow is bigger than number of queues\n"); |
| return; |
| } |
| |
| txq = &il->txq[scd_flow]; |
| sta_id = ba_resp->sta_id; |
| tid = ba_resp->tid; |
| agg = &il->stations[sta_id].tid[tid].agg; |
| if (unlikely(agg->txq_id != scd_flow)) { |
| /* |
| * FIXME: this is a uCode bug which need to be addressed, |
| * log the information and return for now! |
| * since it is possible happen very often and in order |
| * not to fill the syslog, don't enable the logging by default |
| */ |
| D_TX_REPLY("BA scd_flow %d does not match txq_id %d\n", |
| scd_flow, agg->txq_id); |
| return; |
| } |
| |
| /* Find idx just before block-ack win */ |
| idx = il_queue_dec_wrap(ba_resp_scd_ssn & 0xff, txq->q.n_bd); |
| |
| spin_lock_irqsave(&il->sta_lock, flags); |
| |
| D_TX_REPLY("N_COMPRESSED_BA [%d] Received from %pM, " "sta_id = %d\n", |
| agg->wait_for_ba, (u8 *) &ba_resp->sta_addr_lo32, |
| ba_resp->sta_id); |
| D_TX_REPLY("TID = %d, SeqCtl = %d, bitmap = 0x%llx," "scd_flow = " |
| "%d, scd_ssn = %d\n", ba_resp->tid, ba_resp->seq_ctl, |
| (unsigned long long)le64_to_cpu(ba_resp->bitmap), |
| ba_resp->scd_flow, ba_resp->scd_ssn); |
| D_TX_REPLY("DAT start_idx = %d, bitmap = 0x%llx\n", agg->start_idx, |
| (unsigned long long)agg->bitmap); |
| |
| /* Update driver's record of ACK vs. not for each frame in win */ |
| il4965_tx_status_reply_compressed_ba(il, agg, ba_resp); |
| |
| /* Release all TFDs before the SSN, i.e. all TFDs in front of |
| * block-ack win (we assume that they've been successfully |
| * transmitted ... if not, it's too late anyway). */ |
| if (txq->q.read_ptr != (ba_resp_scd_ssn & 0xff)) { |
| /* calculate mac80211 ampdu sw queue to wake */ |
| int freed = il4965_tx_queue_reclaim(il, scd_flow, idx); |
| il4965_free_tfds_in_queue(il, sta_id, tid, freed); |
| |
| if (il_queue_space(&txq->q) > txq->q.low_mark && |
| il->mac80211_registered && |
| agg->state != IL_EMPTYING_HW_QUEUE_DELBA) |
| il_wake_queue(il, txq); |
| |
| il4965_txq_check_empty(il, sta_id, tid, scd_flow); |
| } |
| |
| spin_unlock_irqrestore(&il->sta_lock, flags); |
| } |
| |
| #ifdef CONFIG_IWLEGACY_DEBUG |
| const char * |
| il4965_get_tx_fail_reason(u32 status) |
| { |
| #define TX_STATUS_FAIL(x) case TX_STATUS_FAIL_ ## x: return #x |
| #define TX_STATUS_POSTPONE(x) case TX_STATUS_POSTPONE_ ## x: return #x |
| |
| switch (status & TX_STATUS_MSK) { |
| case TX_STATUS_SUCCESS: |
| return "SUCCESS"; |
| TX_STATUS_POSTPONE(DELAY); |
| TX_STATUS_POSTPONE(FEW_BYTES); |
| TX_STATUS_POSTPONE(QUIET_PERIOD); |
| TX_STATUS_POSTPONE(CALC_TTAK); |
| TX_STATUS_FAIL(INTERNAL_CROSSED_RETRY); |
| TX_STATUS_FAIL(SHORT_LIMIT); |
| TX_STATUS_FAIL(LONG_LIMIT); |
| TX_STATUS_FAIL(FIFO_UNDERRUN); |
| TX_STATUS_FAIL(DRAIN_FLOW); |
| TX_STATUS_FAIL(RFKILL_FLUSH); |
| TX_STATUS_FAIL(LIFE_EXPIRE); |
| TX_STATUS_FAIL(DEST_PS); |
| TX_STATUS_FAIL(HOST_ABORTED); |
| TX_STATUS_FAIL(BT_RETRY); |
| TX_STATUS_FAIL(STA_INVALID); |
| TX_STATUS_FAIL(FRAG_DROPPED); |
| TX_STATUS_FAIL(TID_DISABLE); |
| TX_STATUS_FAIL(FIFO_FLUSHED); |
| TX_STATUS_FAIL(INSUFFICIENT_CF_POLL); |
| TX_STATUS_FAIL(PASSIVE_NO_RX); |
| TX_STATUS_FAIL(NO_BEACON_ON_RADAR); |
| } |
| |
| return "UNKNOWN"; |
| |
| #undef TX_STATUS_FAIL |
| #undef TX_STATUS_POSTPONE |
| } |
| #endif /* CONFIG_IWLEGACY_DEBUG */ |
| |
| static struct il_link_quality_cmd * |
| il4965_sta_alloc_lq(struct il_priv *il, u8 sta_id) |
| { |
| int i, r; |
| struct il_link_quality_cmd *link_cmd; |
| u32 rate_flags = 0; |
| __le32 rate_n_flags; |
| |
| link_cmd = kzalloc(sizeof(struct il_link_quality_cmd), GFP_KERNEL); |
| if (!link_cmd) { |
| IL_ERR("Unable to allocate memory for LQ cmd.\n"); |
| return NULL; |
| } |
| /* Set up the rate scaling to start at selected rate, fall back |
| * all the way down to 1M in IEEE order, and then spin on 1M */ |
| if (il->band == IEEE80211_BAND_5GHZ) |
| r = RATE_6M_IDX; |
| else |
| r = RATE_1M_IDX; |
| |
| if (r >= IL_FIRST_CCK_RATE && r <= IL_LAST_CCK_RATE) |
| rate_flags |= RATE_MCS_CCK_MSK; |
| |
| rate_flags |= |
| il4965_first_antenna(il->hw_params. |
| valid_tx_ant) << RATE_MCS_ANT_POS; |
| rate_n_flags = cpu_to_le32(il_rates[r].plcp | rate_flags); |
| for (i = 0; i < LINK_QUAL_MAX_RETRY_NUM; i++) |
| link_cmd->rs_table[i].rate_n_flags = rate_n_flags; |
| |
| link_cmd->general_params.single_stream_ant_msk = |
| il4965_first_antenna(il->hw_params.valid_tx_ant); |
| |
| link_cmd->general_params.dual_stream_ant_msk = |
| il->hw_params.valid_tx_ant & ~il4965_first_antenna(il->hw_params. |
| valid_tx_ant); |
| if (!link_cmd->general_params.dual_stream_ant_msk) { |
| link_cmd->general_params.dual_stream_ant_msk = ANT_AB; |
| } else if (il4965_num_of_ant(il->hw_params.valid_tx_ant) == 2) { |
| link_cmd->general_params.dual_stream_ant_msk = |
| il->hw_params.valid_tx_ant; |
| } |
| |
| link_cmd->agg_params.agg_dis_start_th = LINK_QUAL_AGG_DISABLE_START_DEF; |
| link_cmd->agg_params.agg_time_limit = |
| cpu_to_le16(LINK_QUAL_AGG_TIME_LIMIT_DEF); |
| |
| link_cmd->sta_id = sta_id; |
| |
| return link_cmd; |
| } |
| |
| /* |
| * il4965_add_bssid_station - Add the special IBSS BSSID station |
| * |
| * Function sleeps. |
| */ |
| int |
| il4965_add_bssid_station(struct il_priv *il, const u8 *addr, u8 *sta_id_r) |
| { |
| int ret; |
| u8 sta_id; |
| struct il_link_quality_cmd *link_cmd; |
| unsigned long flags; |
| |
| if (sta_id_r) |
| *sta_id_r = IL_INVALID_STATION; |
| |
| ret = il_add_station_common(il, addr, 0, NULL, &sta_id); |
| if (ret) { |
| IL_ERR("Unable to add station %pM\n", addr); |
| return ret; |
| } |
| |
| if (sta_id_r) |
| *sta_id_r = sta_id; |
| |
| spin_lock_irqsave(&il->sta_lock, flags); |
| il->stations[sta_id].used |= IL_STA_LOCAL; |
| spin_unlock_irqrestore(&il->sta_lock, flags); |
| |
| /* Set up default rate scaling table in device's station table */ |
| link_cmd = il4965_sta_alloc_lq(il, sta_id); |
| if (!link_cmd) { |
| IL_ERR("Unable to initialize rate scaling for station %pM.\n", |
| addr); |
| return -ENOMEM; |
| } |
| |
| ret = il_send_lq_cmd(il, link_cmd, CMD_SYNC, true); |
| if (ret) |
| IL_ERR("Link quality command failed (%d)\n", ret); |
| |
| spin_lock_irqsave(&il->sta_lock, flags); |
| il->stations[sta_id].lq = link_cmd; |
| spin_unlock_irqrestore(&il->sta_lock, flags); |
| |
| return 0; |
| } |
| |
| static int |
| il4965_static_wepkey_cmd(struct il_priv *il, bool send_if_empty) |
| { |
| int i; |
| u8 buff[sizeof(struct il_wep_cmd) + |
| sizeof(struct il_wep_key) * WEP_KEYS_MAX]; |
| struct il_wep_cmd *wep_cmd = (struct il_wep_cmd *)buff; |
| size_t cmd_size = sizeof(struct il_wep_cmd); |
| struct il_host_cmd cmd = { |
| .id = C_WEPKEY, |
| .data = wep_cmd, |
| .flags = CMD_SYNC, |
| }; |
| bool not_empty = false; |
| |
| might_sleep(); |
| |
| memset(wep_cmd, 0, |
| cmd_size + (sizeof(struct il_wep_key) * WEP_KEYS_MAX)); |
| |
| for (i = 0; i < WEP_KEYS_MAX; i++) { |
| u8 key_size = il->_4965.wep_keys[i].key_size; |
| |
| wep_cmd->key[i].key_idx = i; |
| if (key_size) { |
| wep_cmd->key[i].key_offset = i; |
| not_empty = true; |
| } else |
| wep_cmd->key[i].key_offset = WEP_INVALID_OFFSET; |
| |
| wep_cmd->key[i].key_size = key_size; |
| memcpy(&wep_cmd->key[i].key[3], il->_4965.wep_keys[i].key, key_size); |
| } |
| |
| wep_cmd->global_key_type = WEP_KEY_WEP_TYPE; |
| wep_cmd->num_keys = WEP_KEYS_MAX; |
| |
| cmd_size += sizeof(struct il_wep_key) * WEP_KEYS_MAX; |
| cmd.len = cmd_size; |
| |
| if (not_empty || send_if_empty) |
| return il_send_cmd(il, &cmd); |
| else |
| return 0; |
| } |
| |
| int |
| il4965_restore_default_wep_keys(struct il_priv *il) |
| { |
| lockdep_assert_held(&il->mutex); |
| |
| return il4965_static_wepkey_cmd(il, false); |
| } |
| |
| int |
| il4965_remove_default_wep_key(struct il_priv *il, |
| struct ieee80211_key_conf *keyconf) |
| { |
| int ret; |
| int idx = keyconf->keyidx; |
| |
| lockdep_assert_held(&il->mutex); |
| |
| D_WEP("Removing default WEP key: idx=%d\n", idx); |
| |
| memset(&il->_4965.wep_keys[idx], 0, sizeof(struct il_wep_key)); |
| if (il_is_rfkill(il)) { |
| D_WEP("Not sending C_WEPKEY command due to RFKILL.\n"); |
| /* but keys in device are clear anyway so return success */ |
| return 0; |
| } |
| ret = il4965_static_wepkey_cmd(il, 1); |
| D_WEP("Remove default WEP key: idx=%d ret=%d\n", idx, ret); |
| |
| return ret; |
| } |
| |
| int |
| il4965_set_default_wep_key(struct il_priv *il, |
| struct ieee80211_key_conf *keyconf) |
| { |
| int ret; |
| int len = keyconf->keylen; |
| int idx = keyconf->keyidx; |
| |
| lockdep_assert_held(&il->mutex); |
| |
| if (len != WEP_KEY_LEN_128 && len != WEP_KEY_LEN_64) { |
| D_WEP("Bad WEP key length %d\n", keyconf->keylen); |
| return -EINVAL; |
| } |
| |
| keyconf->flags &= ~IEEE80211_KEY_FLAG_GENERATE_IV; |
| keyconf->hw_key_idx = HW_KEY_DEFAULT; |
| il->stations[IL_AP_ID].keyinfo.cipher = keyconf->cipher; |
| |
| il->_4965.wep_keys[idx].key_size = len; |
| memcpy(&il->_4965.wep_keys[idx].key, &keyconf->key, len); |
| |
| ret = il4965_static_wepkey_cmd(il, false); |
| |
| D_WEP("Set default WEP key: len=%d idx=%d ret=%d\n", len, idx, ret); |
| return ret; |
| } |
| |
| static int |
| il4965_set_wep_dynamic_key_info(struct il_priv *il, |
| struct ieee80211_key_conf *keyconf, u8 sta_id) |
| { |
| unsigned long flags; |
| __le16 key_flags = 0; |
| struct il_addsta_cmd sta_cmd; |
| |
| lockdep_assert_held(&il->mutex); |
| |
| keyconf->flags &= ~IEEE80211_KEY_FLAG_GENERATE_IV; |
| |
| key_flags |= (STA_KEY_FLG_WEP | STA_KEY_FLG_MAP_KEY_MSK); |
| key_flags |= cpu_to_le16(keyconf->keyidx << STA_KEY_FLG_KEYID_POS); |
| key_flags &= ~STA_KEY_FLG_INVALID; |
| |
| if (keyconf->keylen == WEP_KEY_LEN_128) |
| key_flags |= STA_KEY_FLG_KEY_SIZE_MSK; |
| |
| if (sta_id == il->hw_params.bcast_id) |
| key_flags |= STA_KEY_MULTICAST_MSK; |
| |
| spin_lock_irqsave(&il->sta_lock, flags); |
| |
| il->stations[sta_id].keyinfo.cipher = keyconf->cipher; |
| il->stations[sta_id].keyinfo.keylen = keyconf->keylen; |
| il->stations[sta_id].keyinfo.keyidx = keyconf->keyidx; |
| |
| memcpy(il->stations[sta_id].keyinfo.key, keyconf->key, keyconf->keylen); |
| |
| memcpy(&il->stations[sta_id].sta.key.key[3], keyconf->key, |
| keyconf->keylen); |
| |
| if ((il->stations[sta_id].sta.key. |
| key_flags & STA_KEY_FLG_ENCRYPT_MSK) == STA_KEY_FLG_NO_ENC) |
| il->stations[sta_id].sta.key.key_offset = |
| il_get_free_ucode_key_idx(il); |
| /* else, we are overriding an existing key => no need to allocated room |
| * in uCode. */ |
| |
| WARN(il->stations[sta_id].sta.key.key_offset == WEP_INVALID_OFFSET, |
| "no space for a new key"); |
| |
| il->stations[sta_id].sta.key.key_flags = key_flags; |
| il->stations[sta_id].sta.sta.modify_mask = STA_MODIFY_KEY_MASK; |
| il->stations[sta_id].sta.mode = STA_CONTROL_MODIFY_MSK; |
| |
| memcpy(&sta_cmd, &il->stations[sta_id].sta, |
| sizeof(struct il_addsta_cmd)); |
| spin_unlock_irqrestore(&il->sta_lock, flags); |
| |
| return il_send_add_sta(il, &sta_cmd, CMD_SYNC); |
| } |
| |
| static int |
| il4965_set_ccmp_dynamic_key_info(struct il_priv *il, |
| struct ieee80211_key_conf *keyconf, u8 sta_id) |
| { |
| unsigned long flags; |
| __le16 key_flags = 0; |
| struct il_addsta_cmd sta_cmd; |
| |
| lockdep_assert_held(&il->mutex); |
| |
| key_flags |= (STA_KEY_FLG_CCMP | STA_KEY_FLG_MAP_KEY_MSK); |
| key_flags |= cpu_to_le16(keyconf->keyidx << STA_KEY_FLG_KEYID_POS); |
| key_flags &= ~STA_KEY_FLG_INVALID; |
| |
| if (sta_id == il->hw_params.bcast_id) |
| key_flags |= STA_KEY_MULTICAST_MSK; |
| |
| keyconf->flags |= IEEE80211_KEY_FLAG_GENERATE_IV; |
| |
| spin_lock_irqsave(&il->sta_lock, flags); |
| il->stations[sta_id].keyinfo.cipher = keyconf->cipher; |
| il->stations[sta_id].keyinfo.keylen = keyconf->keylen; |
| |
| memcpy(il->stations[sta_id].keyinfo.key, keyconf->key, keyconf->keylen); |
| |
| memcpy(il->stations[sta_id].sta.key.key, keyconf->key, keyconf->keylen); |
| |
| if ((il->stations[sta_id].sta.key. |
| key_flags & STA_KEY_FLG_ENCRYPT_MSK) == STA_KEY_FLG_NO_ENC) |
| il->stations[sta_id].sta.key.key_offset = |
| il_get_free_ucode_key_idx(il); |
| /* else, we are overriding an existing key => no need to allocated room |
| * in uCode. */ |
| |
| WARN(il->stations[sta_id].sta.key.key_offset == WEP_INVALID_OFFSET, |
| "no space for a new key"); |
| |
| il->stations[sta_id].sta.key.key_flags = key_flags; |
| il->stations[sta_id].sta.sta.modify_mask = STA_MODIFY_KEY_MASK; |
| il->stations[sta_id].sta.mode = STA_CONTROL_MODIFY_MSK; |
| |
| memcpy(&sta_cmd, &il->stations[sta_id].sta, |
| sizeof(struct il_addsta_cmd)); |
| spin_unlock_irqrestore(&il->sta_lock, flags); |
| |
| return il_send_add_sta(il, &sta_cmd, CMD_SYNC); |
| } |
| |
| static int |
| il4965_set_tkip_dynamic_key_info(struct il_priv *il, |
| struct ieee80211_key_conf *keyconf, u8 sta_id) |
| { |
| unsigned long flags; |
| int ret = 0; |
| __le16 key_flags = 0; |
| |
| key_flags |= (STA_KEY_FLG_TKIP | STA_KEY_FLG_MAP_KEY_MSK); |
| key_flags |= cpu_to_le16(keyconf->keyidx << STA_KEY_FLG_KEYID_POS); |
| key_flags &= ~STA_KEY_FLG_INVALID; |
| |
| if (sta_id == il->hw_params.bcast_id) |
| key_flags |= STA_KEY_MULTICAST_MSK; |
| |
| keyconf->flags |= IEEE80211_KEY_FLAG_GENERATE_IV; |
| keyconf->flags |= IEEE80211_KEY_FLAG_GENERATE_MMIC; |
| |
| spin_lock_irqsave(&il->sta_lock, flags); |
| |
| il->stations[sta_id].keyinfo.cipher = keyconf->cipher; |
| il->stations[sta_id].keyinfo.keylen = 16; |
| |
| if ((il->stations[sta_id].sta.key. |
| key_flags & STA_KEY_FLG_ENCRYPT_MSK) == STA_KEY_FLG_NO_ENC) |
| il->stations[sta_id].sta.key.key_offset = |
| il_get_free_ucode_key_idx(il); |
| /* else, we are overriding an existing key => no need to allocated room |
| * in uCode. */ |
| |
| WARN(il->stations[sta_id].sta.key.key_offset == WEP_INVALID_OFFSET, |
| "no space for a new key"); |
| |
| il->stations[sta_id].sta.key.key_flags = key_flags; |
| |
| /* This copy is acutally not needed: we get the key with each TX */ |
| memcpy(il->stations[sta_id].keyinfo.key, keyconf->key, 16); |
| |
| memcpy(il->stations[sta_id].sta.key.key, keyconf->key, 16); |
| |
| spin_unlock_irqrestore(&il->sta_lock, flags); |
| |
| return ret; |
| } |
| |
| void |
| il4965_update_tkip_key(struct il_priv *il, struct ieee80211_key_conf *keyconf, |
| struct ieee80211_sta *sta, u32 iv32, u16 *phase1key) |
| { |
| u8 sta_id; |
| unsigned long flags; |
| int i; |
| |
| if (il_scan_cancel(il)) { |
| /* cancel scan failed, just live w/ bad key and rely |
| briefly on SW decryption */ |
| return; |
| } |
| |
| sta_id = il_sta_id_or_broadcast(il, sta); |
| if (sta_id == IL_INVALID_STATION) |
| return; |
| |
| spin_lock_irqsave(&il->sta_lock, flags); |
| |
| il->stations[sta_id].sta.key.tkip_rx_tsc_byte2 = (u8) iv32; |
| |
| for (i = 0; i < 5; i++) |
| il->stations[sta_id].sta.key.tkip_rx_ttak[i] = |
| cpu_to_le16(phase1key[i]); |
| |
| il->stations[sta_id].sta.sta.modify_mask = STA_MODIFY_KEY_MASK; |
| il->stations[sta_id].sta.mode = STA_CONTROL_MODIFY_MSK; |
| |
| il_send_add_sta(il, &il->stations[sta_id].sta, CMD_ASYNC); |
| |
| spin_unlock_irqrestore(&il->sta_lock, flags); |
| } |
| |
| int |
| il4965_remove_dynamic_key(struct il_priv *il, |
| struct ieee80211_key_conf *keyconf, u8 sta_id) |
| { |
| unsigned long flags; |
| u16 key_flags; |
| u8 keyidx; |
| struct il_addsta_cmd sta_cmd; |
| |
| lockdep_assert_held(&il->mutex); |
| |
| il->_4965.key_mapping_keys--; |
| |
| spin_lock_irqsave(&il->sta_lock, flags); |
| key_flags = le16_to_cpu(il->stations[sta_id].sta.key.key_flags); |
| keyidx = (key_flags >> STA_KEY_FLG_KEYID_POS) & 0x3; |
| |
| D_WEP("Remove dynamic key: idx=%d sta=%d\n", keyconf->keyidx, sta_id); |
| |
| if (keyconf->keyidx != keyidx) { |
| /* We need to remove a key with idx different that the one |
| * in the uCode. This means that the key we need to remove has |
| * been replaced by another one with different idx. |
| * Don't do anything and return ok |
| */ |
| spin_unlock_irqrestore(&il->sta_lock, flags); |
| return 0; |
| } |
| |
| if (il->stations[sta_id].sta.key.key_flags & STA_KEY_FLG_INVALID) { |
| IL_WARN("Removing wrong key %d 0x%x\n", keyconf->keyidx, |
| key_flags); |
| spin_unlock_irqrestore(&il->sta_lock, flags); |
| return 0; |
| } |
| |
| if (!test_and_clear_bit |
| (il->stations[sta_id].sta.key.key_offset, &il->ucode_key_table)) |
| IL_ERR("idx %d not used in uCode key table.\n", |
| il->stations[sta_id].sta.key.key_offset); |
| memset(&il->stations[sta_id].keyinfo, 0, sizeof(struct il_hw_key)); |
| memset(&il->stations[sta_id].sta.key, 0, sizeof(struct il4965_keyinfo)); |
| il->stations[sta_id].sta.key.key_flags = |
| STA_KEY_FLG_NO_ENC | STA_KEY_FLG_INVALID; |
| il->stations[sta_id].sta.key.key_offset = keyconf->hw_key_idx; |
| il->stations[sta_id].sta.sta.modify_mask = STA_MODIFY_KEY_MASK; |
| il->stations[sta_id].sta.mode = STA_CONTROL_MODIFY_MSK; |
| |
| if (il_is_rfkill(il)) { |
| D_WEP |
| ("Not sending C_ADD_STA command because RFKILL enabled.\n"); |
| spin_unlock_irqrestore(&il->sta_lock, flags); |
| return 0; |
| } |
| memcpy(&sta_cmd, &il->stations[sta_id].sta, |
| sizeof(struct il_addsta_cmd)); |
| spin_unlock_irqrestore(&il->sta_lock, flags); |
| |
| return il_send_add_sta(il, &sta_cmd, CMD_SYNC); |
| } |
| |
| int |
| il4965_set_dynamic_key(struct il_priv *il, struct ieee80211_key_conf *keyconf, |
| u8 sta_id) |
| { |
| int ret; |
| |
| lockdep_assert_held(&il->mutex); |
| |
| il->_4965.key_mapping_keys++; |
| keyconf->hw_key_idx = HW_KEY_DYNAMIC; |
| |
| switch (keyconf->cipher) { |
| case WLAN_CIPHER_SUITE_CCMP: |
| ret = |
| il4965_set_ccmp_dynamic_key_info(il, keyconf, sta_id); |
| break; |
| case WLAN_CIPHER_SUITE_TKIP: |
| ret = |
| il4965_set_tkip_dynamic_key_info(il, keyconf, sta_id); |
| break; |
| case WLAN_CIPHER_SUITE_WEP40: |
| case WLAN_CIPHER_SUITE_WEP104: |
| ret = il4965_set_wep_dynamic_key_info(il, keyconf, sta_id); |
| break; |
| default: |
| IL_ERR("Unknown alg: %s cipher = %x\n", __func__, |
| keyconf->cipher); |
| ret = -EINVAL; |
| } |
| |
| D_WEP("Set dynamic key: cipher=%x len=%d idx=%d sta=%d ret=%d\n", |
| keyconf->cipher, keyconf->keylen, keyconf->keyidx, sta_id, ret); |
| |
| return ret; |
| } |
| |
| /** |
| * il4965_alloc_bcast_station - add broadcast station into driver's station table. |
| * |
| * This adds the broadcast station into the driver's station table |
| * and marks it driver active, so that it will be restored to the |
| * device at the next best time. |
| */ |
| int |
| il4965_alloc_bcast_station(struct il_priv *il) |
| { |
| struct il_link_quality_cmd *link_cmd; |
| unsigned long flags; |
| u8 sta_id; |
| |
| spin_lock_irqsave(&il->sta_lock, flags); |
| sta_id = il_prep_station(il, il_bcast_addr, false, NULL); |
| if (sta_id == IL_INVALID_STATION) { |
| IL_ERR("Unable to prepare broadcast station\n"); |
| spin_unlock_irqrestore(&il->sta_lock, flags); |
| |
| return -EINVAL; |
| } |
| |
| il->stations[sta_id].used |= IL_STA_DRIVER_ACTIVE; |
| il->stations[sta_id].used |= IL_STA_BCAST; |
| spin_unlock_irqrestore(&il->sta_lock, flags); |
| |
| link_cmd = il4965_sta_alloc_lq(il, sta_id); |
| if (!link_cmd) { |
| IL_ERR |
| ("Unable to initialize rate scaling for bcast station.\n"); |
| return -ENOMEM; |
| } |
| |
| spin_lock_irqsave(&il->sta_lock, flags); |
| il->stations[sta_id].lq = link_cmd; |
| spin_unlock_irqrestore(&il->sta_lock, flags); |
| |
| return 0; |
| } |
| |
| /** |
| * il4965_update_bcast_station - update broadcast station's LQ command |
| * |
| * Only used by iwl4965. Placed here to have all bcast station management |
| * code together. |
| */ |
| static int |
| il4965_update_bcast_station(struct il_priv *il) |
| { |
| unsigned long flags; |
| struct il_link_quality_cmd *link_cmd; |
| u8 sta_id = il->hw_params.bcast_id; |
| |
| link_cmd = il4965_sta_alloc_lq(il, sta_id); |
| if (!link_cmd) { |
| IL_ERR("Unable to initialize rate scaling for bcast sta.\n"); |
| return -ENOMEM; |
| } |
| |
| spin_lock_irqsave(&il->sta_lock, flags); |
| if (il->stations[sta_id].lq) |
| kfree(il->stations[sta_id].lq); |
| else |
| D_INFO("Bcast sta rate scaling has not been initialized.\n"); |
| il->stations[sta_id].lq = link_cmd; |
| spin_unlock_irqrestore(&il->sta_lock, flags); |
| |
| return 0; |
| } |
| |
| int |
| il4965_update_bcast_stations(struct il_priv *il) |
| { |
| return il4965_update_bcast_station(il); |
| } |
| |
| /** |
| * il4965_sta_tx_modify_enable_tid - Enable Tx for this TID in station table |
| */ |
| int |
| il4965_sta_tx_modify_enable_tid(struct il_priv *il, int sta_id, int tid) |
| { |
| unsigned long flags; |
| struct il_addsta_cmd sta_cmd; |
| |
| lockdep_assert_held(&il->mutex); |
| |
| /* Remove "disable" flag, to enable Tx for this TID */ |
| spin_lock_irqsave(&il->sta_lock, flags); |
| il->stations[sta_id].sta.sta.modify_mask = STA_MODIFY_TID_DISABLE_TX; |
| il->stations[sta_id].sta.tid_disable_tx &= cpu_to_le16(~(1 << tid)); |
| il->stations[sta_id].sta.mode = STA_CONTROL_MODIFY_MSK; |
| memcpy(&sta_cmd, &il->stations[sta_id].sta, |
| sizeof(struct il_addsta_cmd)); |
| spin_unlock_irqrestore(&il->sta_lock, flags); |
| |
| return il_send_add_sta(il, &sta_cmd, CMD_SYNC); |
| } |
| |
| int |
| il4965_sta_rx_agg_start(struct il_priv *il, struct ieee80211_sta *sta, int tid, |
| u16 ssn) |
| { |
| unsigned long flags; |
| int sta_id; |
| struct il_addsta_cmd sta_cmd; |
| |
| lockdep_assert_held(&il->mutex); |
| |
| sta_id = il_sta_id(sta); |
| if (sta_id == IL_INVALID_STATION) |
| return -ENXIO; |
| |
| spin_lock_irqsave(&il->sta_lock, flags); |
| il->stations[sta_id].sta.station_flags_msk = 0; |
| il->stations[sta_id].sta.sta.modify_mask = STA_MODIFY_ADDBA_TID_MSK; |
| il->stations[sta_id].sta.add_immediate_ba_tid = (u8) tid; |
| il->stations[sta_id].sta.add_immediate_ba_ssn = cpu_to_le16(ssn); |
| il->stations[sta_id].sta.mode = STA_CONTROL_MODIFY_MSK; |
| memcpy(&sta_cmd, &il->stations[sta_id].sta, |
| sizeof(struct il_addsta_cmd)); |
| spin_unlock_irqrestore(&il->sta_lock, flags); |
| |
| return il_send_add_sta(il, &sta_cmd, CMD_SYNC); |
| } |
| |
| int |
| il4965_sta_rx_agg_stop(struct il_priv *il, struct ieee80211_sta *sta, int tid) |
| { |
| unsigned long flags; |
| int sta_id; |
| struct il_addsta_cmd sta_cmd; |
| |
| lockdep_assert_held(&il->mutex); |
| |
| sta_id = il_sta_id(sta); |
| if (sta_id == IL_INVALID_STATION) { |
| IL_ERR("Invalid station for AGG tid %d\n", tid); |
| return -ENXIO; |
| } |
| |
| spin_lock_irqsave(&il->sta_lock, flags); |
| il->stations[sta_id].sta.station_flags_msk = 0; |
| il->stations[sta_id].sta.sta.modify_mask = STA_MODIFY_DELBA_TID_MSK; |
| il->stations[sta_id].sta.remove_immediate_ba_tid = (u8) tid; |
| il->stations[sta_id].sta.mode = STA_CONTROL_MODIFY_MSK; |
| memcpy(&sta_cmd, &il->stations[sta_id].sta, |
| sizeof(struct il_addsta_cmd)); |
| spin_unlock_irqrestore(&il->sta_lock, flags); |
| |
| return il_send_add_sta(il, &sta_cmd, CMD_SYNC); |
| } |
| |
| void |
| il4965_sta_modify_sleep_tx_count(struct il_priv *il, int sta_id, int cnt) |
| { |
| unsigned long flags; |
| |
| spin_lock_irqsave(&il->sta_lock, flags); |
| il->stations[sta_id].sta.station_flags |= STA_FLG_PWR_SAVE_MSK; |
| il->stations[sta_id].sta.station_flags_msk = STA_FLG_PWR_SAVE_MSK; |
| il->stations[sta_id].sta.sta.modify_mask = |
| STA_MODIFY_SLEEP_TX_COUNT_MSK; |
| il->stations[sta_id].sta.sleep_tx_count = cpu_to_le16(cnt); |
| il->stations[sta_id].sta.mode = STA_CONTROL_MODIFY_MSK; |
| il_send_add_sta(il, &il->stations[sta_id].sta, CMD_ASYNC); |
| spin_unlock_irqrestore(&il->sta_lock, flags); |
| |
| } |
| |
| void |
| il4965_update_chain_flags(struct il_priv *il) |
| { |
| if (il->ops->set_rxon_chain) { |
| il->ops->set_rxon_chain(il); |
| if (il->active.rx_chain != il->staging.rx_chain) |
| il_commit_rxon(il); |
| } |
| } |
| |
| static void |
| il4965_clear_free_frames(struct il_priv *il) |
| { |
| struct list_head *element; |
| |
| D_INFO("%d frames on pre-allocated heap on clear.\n", il->frames_count); |
| |
| while (!list_empty(&il->free_frames)) { |
| element = il->free_frames.next; |
| list_del(element); |
| kfree(list_entry(element, struct il_frame, list)); |
| il->frames_count--; |
| } |
| |
| if (il->frames_count) { |
| IL_WARN("%d frames still in use. Did we lose one?\n", |
| il->frames_count); |
| il->frames_count = 0; |
| } |
| } |
| |
| static struct il_frame * |
| il4965_get_free_frame(struct il_priv *il) |
| { |
| struct il_frame *frame; |
| struct list_head *element; |
| if (list_empty(&il->free_frames)) { |
| frame = kzalloc(sizeof(*frame), GFP_KERNEL); |
| if (!frame) { |
| IL_ERR("Could not allocate frame!\n"); |
| return NULL; |
| } |
| |
| il->frames_count++; |
| return frame; |
| } |
| |
| element = il->free_frames.next; |
| list_del(element); |
| return list_entry(element, struct il_frame, list); |
| } |
| |
| static void |
| il4965_free_frame(struct il_priv *il, struct il_frame *frame) |
| { |
| memset(frame, 0, sizeof(*frame)); |
| list_add(&frame->list, &il->free_frames); |
| } |
| |
| static u32 |
| il4965_fill_beacon_frame(struct il_priv *il, struct ieee80211_hdr *hdr, |
| int left) |
| { |
| lockdep_assert_held(&il->mutex); |
| |
| if (!il->beacon_skb) |
| return 0; |
| |
| if (il->beacon_skb->len > left) |
| return 0; |
| |
| memcpy(hdr, il->beacon_skb->data, il->beacon_skb->len); |
| |
| return il->beacon_skb->len; |
| } |
| |
| /* Parse the beacon frame to find the TIM element and set tim_idx & tim_size */ |
| static void |
| il4965_set_beacon_tim(struct il_priv *il, |
| struct il_tx_beacon_cmd *tx_beacon_cmd, u8 * beacon, |
| u32 frame_size) |
| { |
| u16 tim_idx; |
| struct ieee80211_mgmt *mgmt = (struct ieee80211_mgmt *)beacon; |
| |
| /* |
| * The idx is relative to frame start but we start looking at the |
| * variable-length part of the beacon. |
| */ |
| tim_idx = mgmt->u.beacon.variable - beacon; |
| |
| /* Parse variable-length elements of beacon to find WLAN_EID_TIM */ |
| while ((tim_idx < (frame_size - 2)) && |
| (beacon[tim_idx] != WLAN_EID_TIM)) |
| tim_idx += beacon[tim_idx + 1] + 2; |
| |
| /* If TIM field was found, set variables */ |
| if ((tim_idx < (frame_size - 1)) && (beacon[tim_idx] == WLAN_EID_TIM)) { |
| tx_beacon_cmd->tim_idx = cpu_to_le16(tim_idx); |
| tx_beacon_cmd->tim_size = beacon[tim_idx + 1]; |
| } else |
| IL_WARN("Unable to find TIM Element in beacon\n"); |
| } |
| |
| static unsigned int |
| il4965_hw_get_beacon_cmd(struct il_priv *il, struct il_frame *frame) |
| { |
| struct il_tx_beacon_cmd *tx_beacon_cmd; |
| u32 frame_size; |
| u32 rate_flags; |
| u32 rate; |
| /* |
| * We have to set up the TX command, the TX Beacon command, and the |
| * beacon contents. |
| */ |
| |
| lockdep_assert_held(&il->mutex); |
| |
| if (!il->beacon_enabled) { |
| IL_ERR("Trying to build beacon without beaconing enabled\n"); |
| return 0; |
| } |
| |
| /* Initialize memory */ |
| tx_beacon_cmd = &frame->u.beacon; |
| memset(tx_beacon_cmd, 0, sizeof(*tx_beacon_cmd)); |
| |
| /* Set up TX beacon contents */ |
| frame_size = |
| il4965_fill_beacon_frame(il, tx_beacon_cmd->frame, |
| sizeof(frame->u) - sizeof(*tx_beacon_cmd)); |
| if (WARN_ON_ONCE(frame_size > MAX_MPDU_SIZE)) |
| return 0; |
| if (!frame_size) |
| return 0; |
| |
| /* Set up TX command fields */ |
| tx_beacon_cmd->tx.len = cpu_to_le16((u16) frame_size); |
| tx_beacon_cmd->tx.sta_id = il->hw_params.bcast_id; |
| tx_beacon_cmd->tx.stop_time.life_time = TX_CMD_LIFE_TIME_INFINITE; |
| tx_beacon_cmd->tx.tx_flags = |
| TX_CMD_FLG_SEQ_CTL_MSK | TX_CMD_FLG_TSF_MSK | |
| TX_CMD_FLG_STA_RATE_MSK; |
| |
| /* Set up TX beacon command fields */ |
| il4965_set_beacon_tim(il, tx_beacon_cmd, (u8 *) tx_beacon_cmd->frame, |
| frame_size); |
| |
| /* Set up packet rate and flags */ |
| rate = il_get_lowest_plcp(il); |
| il4965_toggle_tx_ant(il, &il->mgmt_tx_ant, il->hw_params.valid_tx_ant); |
| rate_flags = BIT(il->mgmt_tx_ant) << RATE_MCS_ANT_POS; |
| if ((rate >= IL_FIRST_CCK_RATE) && (rate <= IL_LAST_CCK_RATE)) |
| rate_flags |= RATE_MCS_CCK_MSK; |
| tx_beacon_cmd->tx.rate_n_flags = cpu_to_le32(rate | rate_flags); |
| |
| return sizeof(*tx_beacon_cmd) + frame_size; |
| } |
| |
| int |
| il4965_send_beacon_cmd(struct il_priv *il) |
| { |
| struct il_frame *frame; |
| unsigned int frame_size; |
| int rc; |
| |
| frame = il4965_get_free_frame(il); |
| if (!frame) { |
| IL_ERR("Could not obtain free frame buffer for beacon " |
| "command.\n"); |
| return -ENOMEM; |
| } |
| |
| frame_size = il4965_hw_get_beacon_cmd(il, frame); |
| if (!frame_size) { |
| IL_ERR("Error configuring the beacon command\n"); |
| il4965_free_frame(il, frame); |
| return -EINVAL; |
| } |
| |
| rc = il_send_cmd_pdu(il, C_TX_BEACON, frame_size, &frame->u.cmd[0]); |
| |
| il4965_free_frame(il, frame); |
| |
| return rc; |
| } |
| |
| static inline dma_addr_t |
| il4965_tfd_tb_get_addr(struct il_tfd *tfd, u8 idx) |
| { |
| struct il_tfd_tb *tb = &tfd->tbs[idx]; |
| |
| dma_addr_t addr = get_unaligned_le32(&tb->lo); |
| if (sizeof(dma_addr_t) > sizeof(u32)) |
| addr |= |
| ((dma_addr_t) (le16_to_cpu(tb->hi_n_len) & 0xF) << 16) << |
| 16; |
| |
| return addr; |
| } |
| |
| static inline u16 |
| il4965_tfd_tb_get_len(struct il_tfd *tfd, u8 idx) |
| { |
| struct il_tfd_tb *tb = &tfd->tbs[idx]; |
| |
| return le16_to_cpu(tb->hi_n_len) >> 4; |
| } |
| |
| static inline void |
| il4965_tfd_set_tb(struct il_tfd *tfd, u8 idx, dma_addr_t addr, u16 len) |
| { |
| struct il_tfd_tb *tb = &tfd->tbs[idx]; |
| u16 hi_n_len = len << 4; |
| |
| put_unaligned_le32(addr, &tb->lo); |
| if (sizeof(dma_addr_t) > sizeof(u32)) |
| hi_n_len |= ((addr >> 16) >> 16) & 0xF; |
| |
| tb->hi_n_len = cpu_to_le16(hi_n_len); |
| |
| tfd->num_tbs = idx + 1; |
| } |
| |
| static inline u8 |
| il4965_tfd_get_num_tbs(struct il_tfd *tfd) |
| { |
| return tfd->num_tbs & 0x1f; |
| } |
| |
| /** |
| * il4965_hw_txq_free_tfd - Free all chunks referenced by TFD [txq->q.read_ptr] |
| * @il - driver ilate data |
| * @txq - tx queue |
| * |
| * Does NOT advance any TFD circular buffer read/write idxes |
| * Does NOT free the TFD itself (which is within circular buffer) |
| */ |
| void |
| il4965_hw_txq_free_tfd(struct il_priv *il, struct il_tx_queue *txq) |
| { |
| struct il_tfd *tfd_tmp = (struct il_tfd *)txq->tfds; |
| struct il_tfd *tfd; |
| struct pci_dev *dev = il->pci_dev; |
| int idx = txq->q.read_ptr; |
| int i; |
| int num_tbs; |
| |
| tfd = &tfd_tmp[idx]; |
| |
| /* Sanity check on number of chunks */ |
| num_tbs = il4965_tfd_get_num_tbs(tfd); |
| |
| if (num_tbs >= IL_NUM_OF_TBS) { |
| IL_ERR("Too many chunks: %i\n", num_tbs); |
| /* @todo issue fatal error, it is quite serious situation */ |
| return; |
| } |
| |
| /* Unmap tx_cmd */ |
| if (num_tbs) |
| pci_unmap_single(dev, dma_unmap_addr(&txq->meta[idx], mapping), |
| dma_unmap_len(&txq->meta[idx], len), |
| PCI_DMA_BIDIRECTIONAL); |
| |
| /* Unmap chunks, if any. */ |
| for (i = 1; i < num_tbs; i++) |
| pci_unmap_single(dev, il4965_tfd_tb_get_addr(tfd, i), |
| il4965_tfd_tb_get_len(tfd, i), |
| PCI_DMA_TODEVICE); |
| |
| /* free SKB */ |
| if (txq->skbs) { |
| struct sk_buff *skb = txq->skbs[txq->q.read_ptr]; |
| |
| /* can be called from irqs-disabled context */ |
| if (skb) { |
| dev_kfree_skb_any(skb); |
| txq->skbs[txq->q.read_ptr] = NULL; |
| } |
| } |
| } |
| |
| int |
| il4965_hw_txq_attach_buf_to_tfd(struct il_priv *il, struct il_tx_queue *txq, |
| dma_addr_t addr, u16 len, u8 reset, u8 pad) |
| { |
| struct il_queue *q; |
| struct il_tfd *tfd, *tfd_tmp; |
| u32 num_tbs; |
| |
| q = &txq->q; |
| tfd_tmp = (struct il_tfd *)txq->tfds; |
| tfd = &tfd_tmp[q->write_ptr]; |
| |
| if (reset) |
| memset(tfd, 0, sizeof(*tfd)); |
| |
| num_tbs = il4965_tfd_get_num_tbs(tfd); |
| |
| /* Each TFD can point to a maximum 20 Tx buffers */ |
| if (num_tbs >= IL_NUM_OF_TBS) { |
| IL_ERR("Error can not send more than %d chunks\n", |
| IL_NUM_OF_TBS); |
| return -EINVAL; |
| } |
| |
| BUG_ON(addr & ~DMA_BIT_MASK(36)); |
| if (unlikely(addr & ~IL_TX_DMA_MASK)) |
| IL_ERR("Unaligned address = %llx\n", (unsigned long long)addr); |
| |
| il4965_tfd_set_tb(tfd, num_tbs, addr, len); |
| |
| return 0; |
| } |
| |
| /* |
| * Tell nic where to find circular buffer of Tx Frame Descriptors for |
| * given Tx queue, and enable the DMA channel used for that queue. |
| * |
| * 4965 supports up to 16 Tx queues in DRAM, mapped to up to 8 Tx DMA |
| * channels supported in hardware. |
| */ |
| int |
| il4965_hw_tx_queue_init(struct il_priv *il, struct il_tx_queue *txq) |
| { |
| int txq_id = txq->q.id; |
| |
| /* Circular buffer (TFD queue in DRAM) physical base address */ |
| il_wr(il, FH49_MEM_CBBC_QUEUE(txq_id), txq->q.dma_addr >> 8); |
| |
| return 0; |
| } |
| |
| /****************************************************************************** |
| * |
| * Generic RX handler implementations |
| * |
| ******************************************************************************/ |
| static void |
| il4965_hdl_alive(struct il_priv *il, struct il_rx_buf *rxb) |
| { |
| struct il_rx_pkt *pkt = rxb_addr(rxb); |
| struct il_alive_resp *palive; |
| struct delayed_work *pwork; |
| |
| palive = &pkt->u.alive_frame; |
| |
| D_INFO("Alive ucode status 0x%08X revision " "0x%01X 0x%01X\n", |
| palive->is_valid, palive->ver_type, palive->ver_subtype); |
| |
| if (palive->ver_subtype == INITIALIZE_SUBTYPE) { |
| D_INFO("Initialization Alive received.\n"); |
| memcpy(&il->card_alive_init, &pkt->u.alive_frame, |
| sizeof(struct il_init_alive_resp)); |
| pwork = &il->init_alive_start; |
| } else { |
| D_INFO("Runtime Alive received.\n"); |
| memcpy(&il->card_alive, &pkt->u.alive_frame, |
| sizeof(struct il_alive_resp)); |
| pwork = &il->alive_start; |
| } |
| |
| /* We delay the ALIVE response by 5ms to |
| * give the HW RF Kill time to activate... */ |
| if (palive->is_valid == UCODE_VALID_OK) |
| queue_delayed_work(il->workqueue, pwork, msecs_to_jiffies(5)); |
| else |
| IL_WARN("uCode did not respond OK.\n"); |
| } |
| |
| /** |
| * il4965_bg_stats_periodic - Timer callback to queue stats |
| * |
| * This callback is provided in order to send a stats request. |
| * |
| * This timer function is continually reset to execute within |
| * 60 seconds since the last N_STATS was received. We need to |
| * ensure we receive the stats in order to update the temperature |
| * used for calibrating the TXPOWER. |
| */ |
| static void |
| il4965_bg_stats_periodic(unsigned long data) |
| { |
| struct il_priv *il = (struct il_priv *)data; |
| |
| if (test_bit(S_EXIT_PENDING, &il->status)) |
| return; |
| |
| /* dont send host command if rf-kill is on */ |
| if (!il_is_ready_rf(il)) |
| return; |
| |
| il_send_stats_request(il, CMD_ASYNC, false); |
| } |
| |
| static void |
| il4965_hdl_beacon(struct il_priv *il, struct il_rx_buf *rxb) |
| { |
| struct il_rx_pkt *pkt = rxb_addr(rxb); |
| struct il4965_beacon_notif *beacon = |
| (struct il4965_beacon_notif *)pkt->u.raw; |
| #ifdef CONFIG_IWLEGACY_DEBUG |
| u8 rate = il4965_hw_get_rate(beacon->beacon_notify_hdr.rate_n_flags); |
| |
| D_RX("beacon status %x retries %d iss %d tsf:0x%.8x%.8x rate %d\n", |
| le32_to_cpu(beacon->beacon_notify_hdr.u.status) & TX_STATUS_MSK, |
| beacon->beacon_notify_hdr.failure_frame, |
| le32_to_cpu(beacon->ibss_mgr_status), |
| le32_to_cpu(beacon->high_tsf), le32_to_cpu(beacon->low_tsf), rate); |
| #endif |
| il->ibss_manager = le32_to_cpu(beacon->ibss_mgr_status); |
| } |
| |
| static void |
| il4965_perform_ct_kill_task(struct il_priv *il) |
| { |
| unsigned long flags; |
| |
| D_POWER("Stop all queues\n"); |
| |
| if (il->mac80211_registered) |
| ieee80211_stop_queues(il->hw); |
| |
| _il_wr(il, CSR_UCODE_DRV_GP1_SET, |
| CSR_UCODE_DRV_GP1_REG_BIT_CT_KILL_EXIT); |
| _il_rd(il, CSR_UCODE_DRV_GP1); |
| |
| spin_lock_irqsave(&il->reg_lock, flags); |
| if (likely(_il_grab_nic_access(il))) |
| _il_release_nic_access(il); |
| spin_unlock_irqrestore(&il->reg_lock, flags); |
| } |
| |
| /* Handle notification from uCode that card's power state is changing |
| * due to software, hardware, or critical temperature RFKILL */ |
| static void |
| il4965_hdl_card_state(struct il_priv *il, struct il_rx_buf *rxb) |
| { |
| struct il_rx_pkt *pkt = rxb_addr(rxb); |
| u32 flags = le32_to_cpu(pkt->u.card_state_notif.flags); |
| unsigned long status = il->status; |
| |
| D_RF_KILL("Card state received: HW:%s SW:%s CT:%s\n", |
| (flags & HW_CARD_DISABLED) ? "Kill" : "On", |
| (flags & SW_CARD_DISABLED) ? "Kill" : "On", |
| (flags & CT_CARD_DISABLED) ? "Reached" : "Not reached"); |
| |
| if (flags & (SW_CARD_DISABLED | HW_CARD_DISABLED | CT_CARD_DISABLED)) { |
| |
| _il_wr(il, CSR_UCODE_DRV_GP1_SET, |
| CSR_UCODE_DRV_GP1_BIT_CMD_BLOCKED); |
| |
| il_wr(il, HBUS_TARG_MBX_C, HBUS_TARG_MBX_C_REG_BIT_CMD_BLOCKED); |
| |
| if (!(flags & RXON_CARD_DISABLED)) { |
| _il_wr(il, CSR_UCODE_DRV_GP1_CLR, |
| CSR_UCODE_DRV_GP1_BIT_CMD_BLOCKED); |
| il_wr(il, HBUS_TARG_MBX_C, |
| HBUS_TARG_MBX_C_REG_BIT_CMD_BLOCKED); |
| } |
| } |
| |
| if (flags & CT_CARD_DISABLED) |
| il4965_perform_ct_kill_task(il); |
| |
| if (flags & HW_CARD_DISABLED) |
| set_bit(S_RFKILL, &il->status); |
| else |
| clear_bit(S_RFKILL, &il->status); |
| |
| if (!(flags & RXON_CARD_DISABLED)) |
| il_scan_cancel(il); |
| |
| if ((test_bit(S_RFKILL, &status) != |
| test_bit(S_RFKILL, &il->status))) |
| wiphy_rfkill_set_hw_state(il->hw->wiphy, |
| test_bit(S_RFKILL, &il->status)); |
| else |
| wake_up(&il->wait_command_queue); |
| } |
| |
| /** |
| * il4965_setup_handlers - Initialize Rx handler callbacks |
| * |
| * Setup the RX handlers for each of the reply types sent from the uCode |
| * to the host. |
| * |
| * This function chains into the hardware specific files for them to setup |
| * any hardware specific handlers as well. |
| */ |
| static void |
| il4965_setup_handlers(struct il_priv *il) |
| { |
| il->handlers[N_ALIVE] = il4965_hdl_alive; |
| il->handlers[N_ERROR] = il_hdl_error; |
| il->handlers[N_CHANNEL_SWITCH] = il_hdl_csa; |
| il->handlers[N_SPECTRUM_MEASUREMENT] = il_hdl_spectrum_measurement; |
| il->handlers[N_PM_SLEEP] = il_hdl_pm_sleep; |
| il->handlers[N_PM_DEBUG_STATS] = il_hdl_pm_debug_stats; |
| il->handlers[N_BEACON] = il4965_hdl_beacon; |
| |
| /* |
| * The same handler is used for both the REPLY to a discrete |
| * stats request from the host as well as for the periodic |
| * stats notifications (after received beacons) from the uCode. |
| */ |
| il->handlers[C_STATS] = il4965_hdl_c_stats; |
| il->handlers[N_STATS] = il4965_hdl_stats; |
| |
| il_setup_rx_scan_handlers(il); |
| |
| /* status change handler */ |
| il->handlers[N_CARD_STATE] = il4965_hdl_card_state; |
| |
| il->handlers[N_MISSED_BEACONS] = il4965_hdl_missed_beacon; |
| /* Rx handlers */ |
| il->handlers[N_RX_PHY] = il4965_hdl_rx_phy; |
| il->handlers[N_RX_MPDU] = il4965_hdl_rx; |
| il->handlers[N_RX] = il4965_hdl_rx; |
| /* block ack */ |
| il->handlers[N_COMPRESSED_BA] = il4965_hdl_compressed_ba; |
| /* Tx response */ |
| il->handlers[C_TX] = il4965_hdl_tx; |
| } |
| |
| /** |
| * il4965_rx_handle - Main entry function for receiving responses from uCode |
| * |
| * Uses the il->handlers callback function array to invoke |
| * the appropriate handlers, including command responses, |
| * frame-received notifications, and other notifications. |
| */ |
| void |
| il4965_rx_handle(struct il_priv *il) |
| { |
| struct il_rx_buf *rxb; |
| struct il_rx_pkt *pkt; |
| struct il_rx_queue *rxq = &il->rxq; |
| u32 r, i; |
| int reclaim; |
| unsigned long flags; |
| u8 fill_rx = 0; |
| u32 count = 8; |
| int total_empty; |
| |
| /* uCode's read idx (stored in shared DRAM) indicates the last Rx |
| * buffer that the driver may process (last buffer filled by ucode). */ |
| r = le16_to_cpu(rxq->rb_stts->closed_rb_num) & 0x0FFF; |
| i = rxq->read; |
| |
| /* Rx interrupt, but nothing sent from uCode */ |
| if (i == r) |
| D_RX("r = %d, i = %d\n", r, i); |
| |
| /* calculate total frames need to be restock after handling RX */ |
| total_empty = r - rxq->write_actual; |
| if (total_empty < 0) |
| total_empty += RX_QUEUE_SIZE; |
| |
| if (total_empty > (RX_QUEUE_SIZE / 2)) |
| fill_rx = 1; |
| |
| while (i != r) { |
| int len; |
| |
| rxb = rxq->queue[i]; |
| |
| /* If an RXB doesn't have a Rx queue slot associated with it, |
| * then a bug has been introduced in the queue refilling |
| * routines -- catch it here */ |
| BUG_ON(rxb == NULL); |
| |
| rxq->queue[i] = NULL; |
| |
| pci_unmap_page(il->pci_dev, rxb->page_dma, |
| PAGE_SIZE << il->hw_params.rx_page_order, |
| PCI_DMA_FROMDEVICE); |
| pkt = rxb_addr(rxb); |
| |
| len = le32_to_cpu(pkt->len_n_flags) & IL_RX_FRAME_SIZE_MSK; |
| len += sizeof(u32); /* account for status word */ |
| |
| reclaim = il_need_reclaim(il, pkt); |
| |
| /* Based on type of command response or notification, |
| * handle those that need handling via function in |
| * handlers table. See il4965_setup_handlers() */ |
| if (il->handlers[pkt->hdr.cmd]) { |
| D_RX("r = %d, i = %d, %s, 0x%02x\n", r, i, |
| il_get_cmd_string(pkt->hdr.cmd), pkt->hdr.cmd); |
| il->isr_stats.handlers[pkt->hdr.cmd]++; |
| il->handlers[pkt->hdr.cmd] (il, rxb); |
| } else { |
| /* No handling needed */ |
| D_RX("r %d i %d No handler needed for %s, 0x%02x\n", r, |
| i, il_get_cmd_string(pkt->hdr.cmd), pkt->hdr.cmd); |
| } |
| |
| /* |
| * XXX: After here, we should always check rxb->page |
| * against NULL before touching it or its virtual |
| * memory (pkt). Because some handler might have |
| * already taken or freed the pages. |
| */ |
| |
| if (reclaim) { |
| /* Invoke any callbacks, transfer the buffer to caller, |
| * and fire off the (possibly) blocking il_send_cmd() |
| * as we reclaim the driver command queue */ |
| if (rxb->page) |
| il_tx_cmd_complete(il, rxb); |
| else |
| IL_WARN("Claim null rxb?\n"); |
| } |
| |
| /* Reuse the page if possible. For notification packets and |
| * SKBs that fail to Rx correctly, add them back into the |
| * rx_free list for reuse later. */ |
| spin_lock_irqsave(&rxq->lock, flags); |
| if (rxb->page != NULL) { |
| rxb->page_dma = |
| pci_map_page(il->pci_dev, rxb->page, 0, |
| PAGE_SIZE << il->hw_params. |
| rx_page_order, PCI_DMA_FROMDEVICE); |
| |
| if (unlikely(pci_dma_mapping_error(il->pci_dev, |
| rxb->page_dma))) { |
| __il_free_pages(il, rxb->page); |
| rxb->page = NULL; |
| list_add_tail(&rxb->list, &rxq->rx_used); |
| } else { |
| list_add_tail(&rxb->list, &rxq->rx_free); |
| rxq->free_count++; |
| } |
| } else |
| list_add_tail(&rxb->list, &rxq->rx_used); |
| |
| spin_unlock_irqrestore(&rxq->lock, flags); |
| |
| i = (i + 1) & RX_QUEUE_MASK; |
| /* If there are a lot of unused frames, |
| * restock the Rx queue so ucode wont assert. */ |
| if (fill_rx) { |
| count++; |
| if (count >= 8) { |
| rxq->read = i; |
| il4965_rx_replenish_now(il); |
| count = 0; |
| } |
| } |
| } |
| |
| /* Backtrack one entry */ |
| rxq->read = i; |
| if (fill_rx) |
| il4965_rx_replenish_now(il); |
| else |
| il4965_rx_queue_restock(il); |
| } |
| |
| /* call this function to flush any scheduled tasklet */ |
| static inline void |
| il4965_synchronize_irq(struct il_priv *il) |
| { |
| /* wait to make sure we flush pending tasklet */ |
| synchronize_irq(il->pci_dev->irq); |
| tasklet_kill(&il->irq_tasklet); |
| } |
| |
| static void |
| il4965_irq_tasklet(struct il_priv *il) |
| { |
| u32 inta, handled = 0; |
| u32 inta_fh; |
| unsigned long flags; |
| u32 i; |
| #ifdef CONFIG_IWLEGACY_DEBUG |
| u32 inta_mask; |
| #endif |
| |
| spin_lock_irqsave(&il->lock, flags); |
| |
| /* Ack/clear/reset pending uCode interrupts. |
| * Note: Some bits in CSR_INT are "OR" of bits in CSR_FH_INT_STATUS, |
| * and will clear only when CSR_FH_INT_STATUS gets cleared. */ |
| inta = _il_rd(il, CSR_INT); |
| _il_wr(il, CSR_INT, inta); |
| |
| /* Ack/clear/reset pending flow-handler (DMA) interrupts. |
| * Any new interrupts that happen after this, either while we're |
| * in this tasklet, or later, will show up in next ISR/tasklet. */ |
| inta_fh = _il_rd(il, CSR_FH_INT_STATUS); |
| _il_wr(il, CSR_FH_INT_STATUS, inta_fh); |
| |
| #ifdef CONFIG_IWLEGACY_DEBUG |
| if (il_get_debug_level(il) & IL_DL_ISR) { |
| /* just for debug */ |
| inta_mask = _il_rd(il, CSR_INT_MASK); |
| D_ISR("inta 0x%08x, enabled 0x%08x, fh 0x%08x\n", inta, |
| inta_mask, inta_fh); |
| } |
| #endif |
| |
| spin_unlock_irqrestore(&il->lock, flags); |
| |
| /* Since CSR_INT and CSR_FH_INT_STATUS reads and clears are not |
| * atomic, make sure that inta covers all the interrupts that |
| * we've discovered, even if FH interrupt came in just after |
| * reading CSR_INT. */ |
| if (inta_fh & CSR49_FH_INT_RX_MASK) |
| inta |= CSR_INT_BIT_FH_RX; |
| if (inta_fh & CSR49_FH_INT_TX_MASK) |
| inta |= CSR_INT_BIT_FH_TX; |
| |
| /* Now service all interrupt bits discovered above. */ |
| if (inta & CSR_INT_BIT_HW_ERR) { |
| IL_ERR("Hardware error detected. Restarting.\n"); |
| |
| /* Tell the device to stop sending interrupts */ |
| il_disable_interrupts(il); |
| |
| il->isr_stats.hw++; |
| il_irq_handle_error(il); |
| |
| handled |= CSR_INT_BIT_HW_ERR; |
| |
| return; |
| } |
| #ifdef CONFIG_IWLEGACY_DEBUG |
| if (il_get_debug_level(il) & (IL_DL_ISR)) { |
| /* NIC fires this, but we don't use it, redundant with WAKEUP */ |
| if (inta & CSR_INT_BIT_SCD) { |
| D_ISR("Scheduler finished to transmit " |
| "the frame/frames.\n"); |
| il->isr_stats.sch++; |
| } |
| |
| /* Alive notification via Rx interrupt will do the real work */ |
| if (inta & CSR_INT_BIT_ALIVE) { |
| D_ISR("Alive interrupt\n"); |
| il->isr_stats.alive++; |
| } |
| } |
| #endif |
| /* Safely ignore these bits for debug checks below */ |
| inta &= ~(CSR_INT_BIT_SCD | CSR_INT_BIT_ALIVE); |
| |
| /* HW RF KILL switch toggled */ |
| if (inta & CSR_INT_BIT_RF_KILL) { |
| int hw_rf_kill = 0; |
| |
| if (!(_il_rd(il, CSR_GP_CNTRL) & CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW)) |
| hw_rf_kill = 1; |
| |
| IL_WARN("RF_KILL bit toggled to %s.\n", |
| hw_rf_kill ? "disable radio" : "enable radio"); |
| |
| il->isr_stats.rfkill++; |
| |
| /* driver only loads ucode once setting the interface up. |
| * the driver allows loading the ucode even if the radio |
| * is killed. Hence update the killswitch state here. The |
| * rfkill handler will care about restarting if needed. |
| */ |
| if (hw_rf_kill) { |
| set_bit(S_RFKILL, &il->status); |
| } else { |
| clear_bit(S_RFKILL, &il->status); |
| il_force_reset(il, true); |
| } |
| wiphy_rfkill_set_hw_state(il->hw->wiphy, hw_rf_kill); |
| |
| handled |= CSR_INT_BIT_RF_KILL; |
| } |
| |
| /* Chip got too hot and stopped itself */ |
| if (inta & CSR_INT_BIT_CT_KILL) { |
| IL_ERR("Microcode CT kill error detected.\n"); |
| il->isr_stats.ctkill++; |
| handled |= CSR_INT_BIT_CT_KILL; |
| } |
| |
| /* Error detected by uCode */ |
| if (inta & CSR_INT_BIT_SW_ERR) { |
| IL_ERR("Microcode SW error detected. " " Restarting 0x%X.\n", |
| inta); |
| il->isr_stats.sw++; |
| il_irq_handle_error(il); |
| handled |= CSR_INT_BIT_SW_ERR; |
| } |
| |
| /* |
| * uCode wakes up after power-down sleep. |
| * Tell device about any new tx or host commands enqueued, |
| * and about any Rx buffers made available while asleep. |
| */ |
| if (inta & CSR_INT_BIT_WAKEUP) { |
| D_ISR("Wakeup interrupt\n"); |
| il_rx_queue_update_write_ptr(il, &il->rxq); |
| for (i = 0; i < il->hw_params.max_txq_num; i++) |
| il_txq_update_write_ptr(il, &il->txq[i]); |
| il->isr_stats.wakeup++; |
| handled |= CSR_INT_BIT_WAKEUP; |
| } |
| |
| /* All uCode command responses, including Tx command responses, |
| * Rx "responses" (frame-received notification), and other |
| * notifications from uCode come through here*/ |
| if (inta & (CSR_INT_BIT_FH_RX | CSR_INT_BIT_SW_RX)) { |
| il4965_rx_handle(il); |
| il->isr_stats.rx++; |
| handled |= (CSR_INT_BIT_FH_RX | CSR_INT_BIT_SW_RX); |
| } |
| |
| /* This "Tx" DMA channel is used only for loading uCode */ |
| if (inta & CSR_INT_BIT_FH_TX) { |
| D_ISR("uCode load interrupt\n"); |
| il->isr_stats.tx++; |
| handled |= CSR_INT_BIT_FH_TX; |
| /* Wake up uCode load routine, now that load is complete */ |
| il->ucode_write_complete = 1; |
| wake_up(&il->wait_command_queue); |
| } |
| |
| if (inta & ~handled) { |
| IL_ERR("Unhandled INTA bits 0x%08x\n", inta & ~handled); |
| il->isr_stats.unhandled++; |
| } |
| |
| if (inta & ~(il->inta_mask)) { |
| IL_WARN("Disabled INTA bits 0x%08x were pending\n", |
| inta & ~il->inta_mask); |
| IL_WARN(" with FH49_INT = 0x%08x\n", inta_fh); |
| } |
| |
| /* Re-enable all interrupts */ |
| /* only Re-enable if disabled by irq */ |
| if (test_bit(S_INT_ENABLED, &il->status)) |
| il_enable_interrupts(il); |
| /* Re-enable RF_KILL if it occurred */ |
| else if (handled & CSR_INT_BIT_RF_KILL) |
| il_enable_rfkill_int(il); |
| |
| #ifdef CONFIG_IWLEGACY_DEBUG |
| if (il_get_debug_level(il) & (IL_DL_ISR)) { |
| inta = _il_rd(il, CSR_INT); |
| inta_mask = _il_rd(il, CSR_INT_MASK); |
| inta_fh = _il_rd(il, CSR_FH_INT_STATUS); |
| D_ISR("End inta 0x%08x, enabled 0x%08x, fh 0x%08x, " |
| "flags 0x%08lx\n", inta, inta_mask, inta_fh, flags); |
| } |
| #endif |
| } |
| |
| /***************************************************************************** |
| * |
| * sysfs attributes |
| * |
| *****************************************************************************/ |
| |
| #ifdef CONFIG_IWLEGACY_DEBUG |
| |
| /* |
| * The following adds a new attribute to the sysfs representation |
| * of this device driver (i.e. a new file in /sys/class/net/wlan0/device/) |
| * used for controlling the debug level. |
| * |
| * See the level definitions in iwl for details. |
| * |
| * The debug_level being managed using sysfs below is a per device debug |
| * level that is used instead of the global debug level if it (the per |
| * device debug level) is set. |
| */ |
| static ssize_t |
| il4965_show_debug_level(struct device *d, struct device_attribute *attr, |
| char *buf) |
| { |
| struct il_priv *il = dev_get_drvdata(d); |
| return sprintf(buf, "0x%08X\n", il_get_debug_level(il)); |
| } |
| |
| static ssize_t |
| il4965_store_debug_level(struct device *d, struct device_attribute *attr, |
| const char *buf, size_t count) |
| { |
| struct il_priv *il = dev_get_drvdata(d); |
| unsigned long val; |
| int ret; |
| |
| ret = kstrtoul(buf, 0, &val); |
| if (ret) |
| IL_ERR("%s is not in hex or decimal form.\n", buf); |
| else |
| il->debug_level = val; |
| |
| return strnlen(buf, count); |
| } |
| |
| static DEVICE_ATTR(debug_level, S_IWUSR | S_IRUGO, il4965_show_debug_level, |
| il4965_store_debug_level); |
| |
| #endif /* CONFIG_IWLEGACY_DEBUG */ |
| |
| static ssize_t |
| il4965_show_temperature(struct device *d, struct device_attribute *attr, |
| char *buf) |
| { |
| struct il_priv *il = dev_get_drvdata(d); |
| |
| if (!il_is_alive(il)) |
| return -EAGAIN; |
| |
| return sprintf(buf, "%d\n", il->temperature); |
| } |
| |
| static DEVICE_ATTR(temperature, S_IRUGO, il4965_show_temperature, NULL); |
| |
| static ssize_t |
| il4965_show_tx_power(struct device *d, struct device_attribute *attr, char *buf) |
| { |
| struct il_priv *il = dev_get_drvdata(d); |
| |
| if (!il_is_ready_rf(il)) |
| return sprintf(buf, "off\n"); |
| else |
| return sprintf(buf, "%d\n", il->tx_power_user_lmt); |
| } |
| |
| static ssize_t |
| il4965_store_tx_power(struct device *d, struct device_attribute *attr, |
| const char *buf, size_t count) |
| { |
| struct il_priv *il = dev_get_drvdata(d); |
| unsigned long val; |
| int ret; |
| |
| ret = kstrtoul(buf, 10, &val); |
| if (ret) |
| IL_INFO("%s is not in decimal form.\n", buf); |
| else { |
| ret = il_set_tx_power(il, val, false); |
| if (ret) |
| IL_ERR("failed setting tx power (0x%d).\n", ret); |
| else |
| ret = count; |
| } |
| return ret; |
| } |
| |
| static DEVICE_ATTR(tx_power, S_IWUSR | S_IRUGO, il4965_show_tx_power, |
| il4965_store_tx_power); |
| |
| static struct attribute *il_sysfs_entries[] = { |
| &dev_attr_temperature.attr, |
| &dev_attr_tx_power.attr, |
| #ifdef CONFIG_IWLEGACY_DEBUG |
| &dev_attr_debug_level.attr, |
| #endif |
| NULL |
| }; |
| |
| static struct attribute_group il_attribute_group = { |
| .name = NULL, /* put in device directory */ |
| .attrs = il_sysfs_entries, |
| }; |
| |
| /****************************************************************************** |
| * |
| * uCode download functions |
| * |
| ******************************************************************************/ |
| |
| static void |
| il4965_dealloc_ucode_pci(struct il_priv *il) |
| { |
| il_free_fw_desc(il->pci_dev, &il->ucode_code); |
| il_free_fw_desc(il->pci_dev, &il->ucode_data); |
| il_free_fw_desc(il->pci_dev, &il->ucode_data_backup); |
| il_free_fw_desc(il->pci_dev, &il->ucode_init); |
| il_free_fw_desc(il->pci_dev, &il->ucode_init_data); |
| il_free_fw_desc(il->pci_dev, &il->ucode_boot); |
| } |
| |
| static void |
| il4965_nic_start(struct il_priv *il) |
| { |
| /* Remove all resets to allow NIC to operate */ |
| _il_wr(il, CSR_RESET, 0); |
| } |
| |
| static void il4965_ucode_callback(const struct firmware *ucode_raw, |
| void *context); |
| static int il4965_mac_setup_register(struct il_priv *il, u32 max_probe_length); |
| |
| static int __must_check |
| il4965_request_firmware(struct il_priv *il, bool first) |
| { |
| const char *name_pre = il->cfg->fw_name_pre; |
| char tag[8]; |
| |
| if (first) { |
| il->fw_idx = il->cfg->ucode_api_max; |
| sprintf(tag, "%d", il->fw_idx); |
| } else { |
| il->fw_idx--; |
| sprintf(tag, "%d", il->fw_idx); |
| } |
| |
| if (il->fw_idx < il->cfg->ucode_api_min) { |
| IL_ERR("no suitable firmware found!\n"); |
| return -ENOENT; |
| } |
| |
| sprintf(il->firmware_name, "%s%s%s", name_pre, tag, ".ucode"); |
| |
| D_INFO("attempting to load firmware '%s'\n", il->firmware_name); |
| |
| return request_firmware_nowait(THIS_MODULE, 1, il->firmware_name, |
| &il->pci_dev->dev, GFP_KERNEL, il, |
| il4965_ucode_callback); |
| } |
| |
| struct il4965_firmware_pieces { |
| const void *inst, *data, *init, *init_data, *boot; |
| size_t inst_size, data_size, init_size, init_data_size, boot_size; |
| }; |
| |
| static int |
| il4965_load_firmware(struct il_priv *il, const struct firmware *ucode_raw, |
| struct il4965_firmware_pieces *pieces) |
| { |
| struct il_ucode_header *ucode = (void *)ucode_raw->data; |
| u32 api_ver, hdr_size; |
| const u8 *src; |
| |
| il->ucode_ver = le32_to_cpu(ucode->ver); |
| api_ver = IL_UCODE_API(il->ucode_ver); |
| |
| switch (api_ver) { |
| default: |
| case 0: |
| case 1: |
| case 2: |
| hdr_size = 24; |
| if (ucode_raw->size < hdr_size) { |
| IL_ERR("File size too small!\n"); |
| return -EINVAL; |
| } |
| pieces->inst_size = le32_to_cpu(ucode->v1.inst_size); |
| pieces->data_size = le32_to_cpu(ucode->v1.data_size); |
| pieces->init_size = le32_to_cpu(ucode->v1.init_size); |
| pieces->init_data_size = le32_to_cpu(ucode->v1.init_data_size); |
| pieces->boot_size = le32_to_cpu(ucode->v1.boot_size); |
| src = ucode->v1.data; |
| break; |
| } |
| |
| /* Verify size of file vs. image size info in file's header */ |
| if (ucode_raw->size != |
| hdr_size + pieces->inst_size + pieces->data_size + |
| pieces->init_size + pieces->init_data_size + pieces->boot_size) { |
| |
| IL_ERR("uCode file size %d does not match expected size\n", |
| (int)ucode_raw->size); |
| return -EINVAL; |
| } |
| |
| pieces->inst = src; |
| src += pieces->inst_size; |
| pieces->data = src; |
| src += pieces->data_size; |
| pieces->init = src; |
| src += pieces->init_size; |
| pieces->init_data = src; |
| src += pieces->init_data_size; |
| pieces->boot = src; |
| src += pieces->boot_size; |
| |
| return 0; |
| } |
| |
| /** |
| * il4965_ucode_callback - callback when firmware was loaded |
| * |
| * If loaded successfully, copies the firmware into buffers |
| * for the card to fetch (via DMA). |
| */ |
| static void |
| il4965_ucode_callback(const struct firmware *ucode_raw, void *context) |
| { |
| struct il_priv *il = context; |
| struct il_ucode_header *ucode; |
| int err; |
| struct il4965_firmware_pieces pieces; |
| const unsigned int api_max = il->cfg->ucode_api_max; |
| const unsigned int api_min = il->cfg->ucode_api_min; |
| u32 api_ver; |
| |
| u32 max_probe_length = 200; |
| u32 standard_phy_calibration_size = |
| IL_DEFAULT_STANDARD_PHY_CALIBRATE_TBL_SIZE; |
| |
| memset(&pieces, 0, sizeof(pieces)); |
| |
| if (!ucode_raw) { |
| if (il->fw_idx <= il->cfg->ucode_api_max) |
| IL_ERR("request for firmware file '%s' failed.\n", |
| il->firmware_name); |
| goto try_again; |
| } |
| |
| D_INFO("Loaded firmware file '%s' (%zd bytes).\n", il->firmware_name, |
| ucode_raw->size); |
| |
| /* Make sure that we got at least the API version number */ |
| if (ucode_raw->size < 4) { |
| IL_ERR("File size way too small!\n"); |
| goto try_again; |
| } |
| |
| /* Data from ucode file: header followed by uCode images */ |
| ucode = (struct il_ucode_header *)ucode_raw->data; |
| |
| err = il4965_load_firmware(il, ucode_raw, &pieces); |
| |
| if (err) |
| goto try_again; |
| |
| api_ver = IL_UCODE_API(il->ucode_ver); |
| |
| /* |
| * api_ver should match the api version forming part of the |
| * firmware filename ... but we don't check for that and only rely |
| * on the API version read from firmware header from here on forward |
| */ |
| if (api_ver < api_min || api_ver > api_max) { |
| IL_ERR("Driver unable to support your firmware API. " |
| "Driver supports v%u, firmware is v%u.\n", api_max, |
| api_ver); |
| goto try_again; |
| } |
| |
| if (api_ver != api_max) |
| IL_ERR("Firmware has old API version. Expected v%u, " |
| "got v%u. New firmware can be obtained " |
| "from http://www.intellinuxwireless.org.\n", api_max, |
| api_ver); |
| |
| IL_INFO("loaded firmware version %u.%u.%u.%u\n", |
| IL_UCODE_MAJOR(il->ucode_ver), IL_UCODE_MINOR(il->ucode_ver), |
| IL_UCODE_API(il->ucode_ver), IL_UCODE_SERIAL(il->ucode_ver)); |
| |
| snprintf(il->hw->wiphy->fw_version, sizeof(il->hw->wiphy->fw_version), |
| "%u.%u.%u.%u", IL_UCODE_MAJOR(il->ucode_ver), |
| IL_UCODE_MINOR(il->ucode_ver), IL_UCODE_API(il->ucode_ver), |
| IL_UCODE_SERIAL(il->ucode_ver)); |
| |
| /* |
| * For any of the failures below (before allocating pci memory) |
| * we will try to load a version with a smaller API -- maybe the |
| * user just got a corrupted version of the latest API. |
| */ |
| |
| D_INFO("f/w package hdr ucode version raw = 0x%x\n", il->ucode_ver); |
| D_INFO("f/w package hdr runtime inst size = %Zd\n", pieces.inst_size); |
| D_INFO("f/w package hdr runtime data size = %Zd\n", pieces.data_size); |
| D_INFO("f/w package hdr init inst size = %Zd\n", pieces.init_size); |
| D_INFO("f/w package hdr init data size = %Zd\n", pieces.init_data_size); |
| D_INFO("f/w package hdr boot inst size = %Zd\n", pieces.boot_size); |
| |
| /* Verify that uCode images will fit in card's SRAM */ |
| if (pieces.inst_size > il->hw_params.max_inst_size) { |
| IL_ERR("uCode instr len %Zd too large to fit in\n", |
| pieces.inst_size); |
| goto try_again; |
| } |
| |
| if (pieces.data_size > il->hw_params.max_data_size) { |
| IL_ERR("uCode data len %Zd too large to fit in\n", |
| pieces.data_size); |
| goto try_again; |
| } |
| |
| if (pieces.init_size > il->hw_params.max_inst_size) { |
| IL_ERR("uCode init instr len %Zd too large to fit in\n", |
| pieces.init_size); |
| goto try_again; |
| } |
| |
| if (pieces.init_data_size > il->hw_params.max_data_size) { |
| IL_ERR("uCode init data len %Zd too large to fit in\n", |
| pieces.init_data_size); |
| goto try_again; |
| } |
| |
| if (pieces.boot_size > il->hw_params.max_bsm_size) { |
| IL_ERR("uCode boot instr len %Zd too large to fit in\n", |
| pieces.boot_size); |
| goto try_again; |
| } |
| |
| /* Allocate ucode buffers for card's bus-master loading ... */ |
| |
| /* Runtime instructions and 2 copies of data: |
| * 1) unmodified from disk |
| * 2) backup cache for save/restore during power-downs */ |
| il->ucode_code.len = pieces.inst_size; |
| il_alloc_fw_desc(il->pci_dev, &il->ucode_code); |
| |
| il->ucode_data.len = pieces.data_size; |
| il_alloc_fw_desc(il->pci_dev, &il->ucode_data); |
| |
| il->ucode_data_backup.len = pieces.data_size; |
| il_alloc_fw_desc(il->pci_dev, &il->ucode_data_backup); |
| |
| if (!il->ucode_code.v_addr || !il->ucode_data.v_addr || |
| !il->ucode_data_backup.v_addr) |
| goto err_pci_alloc; |
| |
| /* Initialization instructions and data */ |
| if (pieces.init_size && pieces.init_data_size) { |
| il->ucode_init.len = pieces.init_size; |
| il_alloc_fw_desc(il->pci_dev, &il->ucode_init); |
| |
| il->ucode_init_data.len = pieces.init_data_size; |
| il_alloc_fw_desc(il->pci_dev, &il->ucode_init_data); |
| |
| if (!il->ucode_init.v_addr || !il->ucode_init_data.v_addr) |
| goto err_pci_alloc; |
| } |
| |
| /* Bootstrap (instructions only, no data) */ |
| if (pieces.boot_size) { |
| il->ucode_boot.len = pieces.boot_size; |
| il_alloc_fw_desc(il->pci_dev, &il->ucode_boot); |
| |
| if (!il->ucode_boot.v_addr) |
| goto err_pci_alloc; |
| } |
| |
| /* Now that we can no longer fail, copy information */ |
| |
| il->sta_key_max_num = STA_KEY_MAX_NUM; |
| |
| /* Copy images into buffers for card's bus-master reads ... */ |
| |
| /* Runtime instructions (first block of data in file) */ |
| D_INFO("Copying (but not loading) uCode instr len %Zd\n", |
| pieces.inst_size); |
| memcpy(il->ucode_code.v_addr, pieces.inst, pieces.inst_size); |
| |
| D_INFO("uCode instr buf vaddr = 0x%p, paddr = 0x%08x\n", |
| il->ucode_code.v_addr, (u32) il->ucode_code.p_addr); |
| |
| /* |
| * Runtime data |
| * NOTE: Copy into backup buffer will be done in il_up() |
| */ |
| D_INFO("Copying (but not loading) uCode data len %Zd\n", |
| pieces.data_size); |
| memcpy(il->ucode_data.v_addr, pieces.data, pieces.data_size); |
| memcpy(il->ucode_data_backup.v_addr, pieces.data, pieces.data_size); |
| |
| /* Initialization instructions */ |
| if (pieces.init_size) { |
| D_INFO("Copying (but not loading) init instr len %Zd\n", |
| pieces.init_size); |
| memcpy(il->ucode_init.v_addr, pieces.init, pieces.init_size); |
| } |
| |
| /* Initialization data */ |
| if (pieces.init_data_size) { |
| D_INFO("Copying (but not loading) init data len %Zd\n", |
| pieces.init_data_size); |
| memcpy(il->ucode_init_data.v_addr, pieces.init_data, |
| pieces.init_data_size); |
| } |
| |
| /* Bootstrap instructions */ |
| D_INFO("Copying (but not loading) boot instr len %Zd\n", |
| pieces.boot_size); |
| memcpy(il->ucode_boot.v_addr, pieces.boot, pieces.boot_size); |
| |
| /* |
| * figure out the offset of chain noise reset and gain commands |
| * base on the size of standard phy calibration commands table size |
| */ |
| il->_4965.phy_calib_chain_noise_reset_cmd = |
| standard_phy_calibration_size; |
| il->_4965.phy_calib_chain_noise_gain_cmd = |
| standard_phy_calibration_size + 1; |
| |
| /************************************************** |
| * This is still part of probe() in a sense... |
| * |
| * 9. Setup and register with mac80211 and debugfs |
| **************************************************/ |
| err = il4965_mac_setup_register(il, max_probe_length); |
| if (err) |
| goto out_unbind; |
| |
| err = il_dbgfs_register(il, DRV_NAME); |
| if (err) |
| IL_ERR("failed to create debugfs files. Ignoring error: %d\n", |
| err); |
| |
| err = sysfs_create_group(&il->pci_dev->dev.kobj, &il_attribute_group); |
| if (err) { |
| IL_ERR("failed to create sysfs device attributes\n"); |
| goto out_unbind; |
| } |
| |
| /* We have our copies now, allow OS release its copies */ |
| release_firmware(ucode_raw); |
| complete(&il->_4965.firmware_loading_complete); |
| return; |
| |
| try_again: |
| /* try next, if any */ |
| if (il4965_request_firmware(il, false)) |
| goto out_unbind; |
| release_firmware(ucode_raw); |
| return; |
| |
| err_pci_alloc: |
| IL_ERR("failed to allocate pci memory\n"); |
| il4965_dealloc_ucode_pci(il); |
| out_unbind: |
| complete(&il->_4965.firmware_loading_complete); |
| device_release_driver(&il->pci_dev->dev); |
| release_firmware(ucode_raw); |
| } |
| |
| static const char *const desc_lookup_text[] = { |
| "OK", |
| "FAIL", |
| "BAD_PARAM", |
| "BAD_CHECKSUM", |
| "NMI_INTERRUPT_WDG", |
| "SYSASSERT", |
| "FATAL_ERROR", |
| "BAD_COMMAND", |
| "HW_ERROR_TUNE_LOCK", |
| "HW_ERROR_TEMPERATURE", |
| "ILLEGAL_CHAN_FREQ", |
| "VCC_NOT_STBL", |
| "FH49_ERROR", |
| "NMI_INTERRUPT_HOST", |
| "NMI_INTERRUPT_ACTION_PT", |
| "NMI_INTERRUPT_UNKNOWN", |
| "UCODE_VERSION_MISMATCH", |
| "HW_ERROR_ABS_LOCK", |
| "HW_ERROR_CAL_LOCK_FAIL", |
| "NMI_INTERRUPT_INST_ACTION_PT", |
| "NMI_INTERRUPT_DATA_ACTION_PT", |
| "NMI_TRM_HW_ER", |
| "NMI_INTERRUPT_TRM", |
| "NMI_INTERRUPT_BREAK_POINT", |
| "DEBUG_0", |
| "DEBUG_1", |
| "DEBUG_2", |
| "DEBUG_3", |
| }; |
| |
| static struct { |
| char *name; |
| u8 num; |
| } advanced_lookup[] = { |
| { |
| "NMI_INTERRUPT_WDG", 0x34}, { |
| "SYSASSERT", 0x35}, { |
| "UCODE_VERSION_MISMATCH", 0x37}, { |
| "BAD_COMMAND", 0x38}, { |
| "NMI_INTERRUPT_DATA_ACTION_PT", 0x3C}, { |
| "FATAL_ERROR", 0x3D}, { |
| "NMI_TRM_HW_ERR", 0x46}, { |
| "NMI_INTERRUPT_TRM", 0x4C}, { |
| "NMI_INTERRUPT_BREAK_POINT", 0x54}, { |
| "NMI_INTERRUPT_WDG_RXF_FULL", 0x5C}, { |
| "NMI_INTERRUPT_WDG_NO_RBD_RXF_FULL", 0x64}, { |
| "NMI_INTERRUPT_HOST", 0x66}, { |
| "NMI_INTERRUPT_ACTION_PT", 0x7C}, { |
| "NMI_INTERRUPT_UNKNOWN", 0x84}, { |
| "NMI_INTERRUPT_INST_ACTION_PT", 0x86}, { |
| "ADVANCED_SYSASSERT", 0},}; |
| |
| static const char * |
| il4965_desc_lookup(u32 num) |
| { |
| int i; |
| int max = ARRAY_SIZE(desc_lookup_text); |
| |
| if (num < max) |
| return desc_lookup_text[num]; |
| |
| max = ARRAY_SIZE(advanced_lookup) - 1; |
| for (i = 0; i < max; i++) { |
| if (advanced_lookup[i].num == num) |
| break; |
| } |
| return advanced_lookup[i].name; |
| } |
| |
| #define ERROR_START_OFFSET (1 * sizeof(u32)) |
| #define ERROR_ELEM_SIZE (7 * sizeof(u32)) |
| |
| void |
| il4965_dump_nic_error_log(struct il_priv *il) |
| { |
| u32 data2, line; |
| u32 desc, time, count, base, data1; |
| u32 blink1, blink2, ilink1, ilink2; |
| u32 pc, hcmd; |
| |
| if (il->ucode_type == UCODE_INIT) |
| base = le32_to_cpu(il->card_alive_init.error_event_table_ptr); |
| else |
| base = le32_to_cpu(il->card_alive.error_event_table_ptr); |
| |
| if (!il->ops->is_valid_rtc_data_addr(base)) { |
| IL_ERR("Not valid error log pointer 0x%08X for %s uCode\n", |
| base, (il->ucode_type == UCODE_INIT) ? "Init" : "RT"); |
| return; |
| } |
| |
| count = il_read_targ_mem(il, base); |
| |
| if (ERROR_START_OFFSET <= count * ERROR_ELEM_SIZE) { |
| IL_ERR("Start IWL Error Log Dump:\n"); |
| IL_ERR("Status: 0x%08lX, count: %d\n", il->status, count); |
| } |
| |
| desc = il_read_targ_mem(il, base + 1 * sizeof(u32)); |
| il->isr_stats.err_code = desc; |
| pc = il_read_targ_mem(il, base + 2 * sizeof(u32)); |
| blink1 = il_read_targ_mem(il, base + 3 * sizeof(u32)); |
| blink2 = il_read_targ_mem(il, base + 4 * sizeof(u32)); |
| ilink1 = il_read_targ_mem(il, base + 5 * sizeof(u32)); |
| ilink2 = il_read_targ_mem(il, base + 6 * sizeof(u32)); |
| data1 = il_read_targ_mem(il, base + 7 * sizeof(u32)); |
| data2 = il_read_targ_mem(il, base + 8 * sizeof(u32)); |
| line = il_read_targ_mem(il, base + 9 * sizeof(u32)); |
| time = il_read_targ_mem(il, base + 11 * sizeof(u32)); |
| hcmd = il_read_targ_mem(il, base + 22 * sizeof(u32)); |
| |
| IL_ERR("Desc Time " |
| "data1 data2 line\n"); |
| IL_ERR("%-28s (0x%04X) %010u 0x%08X 0x%08X %u\n", |
| il4965_desc_lookup(desc), desc, time, data1, data2, line); |
| IL_ERR("pc blink1 blink2 ilink1 ilink2 hcmd\n"); |
| IL_ERR("0x%05X 0x%05X 0x%05X 0x%05X 0x%05X 0x%05X\n", pc, blink1, |
| blink2, ilink1, ilink2, hcmd); |
| } |
| |
| static void |
| il4965_rf_kill_ct_config(struct il_priv *il) |
| { |
| struct il_ct_kill_config cmd; |
| unsigned long flags; |
| int ret = 0; |
| |
| spin_lock_irqsave(&il->lock, flags); |
| _il_wr(il, CSR_UCODE_DRV_GP1_CLR, |
| CSR_UCODE_DRV_GP1_REG_BIT_CT_KILL_EXIT); |
| spin_unlock_irqrestore(&il->lock, flags); |
| |
| cmd.critical_temperature_R = |
| cpu_to_le32(il->hw_params.ct_kill_threshold); |
| |
| ret = il_send_cmd_pdu(il, C_CT_KILL_CONFIG, sizeof(cmd), &cmd); |
| if (ret) |
| IL_ERR("C_CT_KILL_CONFIG failed\n"); |
| else |
| D_INFO("C_CT_KILL_CONFIG " "succeeded, " |
| "critical temperature is %d\n", |
| il->hw_params.ct_kill_threshold); |
| } |
| |
| static const s8 default_queue_to_tx_fifo[] = { |
| IL_TX_FIFO_VO, |
| IL_TX_FIFO_VI, |
| IL_TX_FIFO_BE, |
| IL_TX_FIFO_BK, |
| IL49_CMD_FIFO_NUM, |
| IL_TX_FIFO_UNUSED, |
| IL_TX_FIFO_UNUSED, |
| }; |
| |
| #define IL_MASK(lo, hi) ((1 << (hi)) | ((1 << (hi)) - (1 << (lo)))) |
| |
| static int |
| il4965_alive_notify(struct il_priv *il) |
| { |
| u32 a; |
| unsigned long flags; |
| int i, chan; |
| u32 reg_val; |
| |
| spin_lock_irqsave(&il->lock, flags); |
| |
| /* Clear 4965's internal Tx Scheduler data base */ |
| il->scd_base_addr = il_rd_prph(il, IL49_SCD_SRAM_BASE_ADDR); |
| a = il->scd_base_addr + IL49_SCD_CONTEXT_DATA_OFFSET; |
| for (; a < il->scd_base_addr + IL49_SCD_TX_STTS_BITMAP_OFFSET; a += 4) |
| il_write_targ_mem(il, a, 0); |
| for (; a < il->scd_base_addr + IL49_SCD_TRANSLATE_TBL_OFFSET; a += 4) |
| il_write_targ_mem(il, a, 0); |
| for (; |
| a < |
| il->scd_base_addr + |
| IL49_SCD_TRANSLATE_TBL_OFFSET_QUEUE(il->hw_params.max_txq_num); |
| a += 4) |
| il_write_targ_mem(il, a, 0); |
| |
| /* Tel 4965 where to find Tx byte count tables */ |
| il_wr_prph(il, IL49_SCD_DRAM_BASE_ADDR, il->scd_bc_tbls.dma >> 10); |
| |
| /* Enable DMA channel */ |
| for (chan = 0; chan < FH49_TCSR_CHNL_NUM; chan++) |
| il_wr(il, FH49_TCSR_CHNL_TX_CONFIG_REG(chan), |
| FH49_TCSR_TX_CONFIG_REG_VAL_DMA_CHNL_ENABLE | |
| FH49_TCSR_TX_CONFIG_REG_VAL_DMA_CREDIT_ENABLE); |
| |
| /* Update FH chicken bits */ |
| reg_val = il_rd(il, FH49_TX_CHICKEN_BITS_REG); |
| il_wr(il, FH49_TX_CHICKEN_BITS_REG, |
| reg_val | FH49_TX_CHICKEN_BITS_SCD_AUTO_RETRY_EN); |
| |
| /* Disable chain mode for all queues */ |
| il_wr_prph(il, IL49_SCD_QUEUECHAIN_SEL, 0); |
| |
| /* Initialize each Tx queue (including the command queue) */ |
| for (i = 0; i < il->hw_params.max_txq_num; i++) { |
| |
| /* TFD circular buffer read/write idxes */ |
| il_wr_prph(il, IL49_SCD_QUEUE_RDPTR(i), 0); |
| il_wr(il, HBUS_TARG_WRPTR, 0 | (i << 8)); |
| |
| /* Max Tx Window size for Scheduler-ACK mode */ |
| il_write_targ_mem(il, |
| il->scd_base_addr + |
| IL49_SCD_CONTEXT_QUEUE_OFFSET(i), |
| (SCD_WIN_SIZE << |
| IL49_SCD_QUEUE_CTX_REG1_WIN_SIZE_POS) & |
| IL49_SCD_QUEUE_CTX_REG1_WIN_SIZE_MSK); |
| |
| /* Frame limit */ |
| il_write_targ_mem(il, |
| il->scd_base_addr + |
| IL49_SCD_CONTEXT_QUEUE_OFFSET(i) + |
| sizeof(u32), |
| (SCD_FRAME_LIMIT << |
| IL49_SCD_QUEUE_CTX_REG2_FRAME_LIMIT_POS) & |
| IL49_SCD_QUEUE_CTX_REG2_FRAME_LIMIT_MSK); |
| |
| } |
| il_wr_prph(il, IL49_SCD_INTERRUPT_MASK, |
| (1 << il->hw_params.max_txq_num) - 1); |
| |
| /* Activate all Tx DMA/FIFO channels */ |
| il4965_txq_set_sched(il, IL_MASK(0, 6)); |
| |
| il4965_set_wr_ptrs(il, IL_DEFAULT_CMD_QUEUE_NUM, 0); |
| |
| /* make sure all queue are not stopped */ |
| memset(&il->queue_stopped[0], 0, sizeof(il->queue_stopped)); |
| for (i = 0; i < 4; i++) |
| atomic_set(&il->queue_stop_count[i], 0); |
| |
| /* reset to 0 to enable all the queue first */ |
| il->txq_ctx_active_msk = 0; |
| /* Map each Tx/cmd queue to its corresponding fifo */ |
| BUILD_BUG_ON(ARRAY_SIZE(default_queue_to_tx_fifo) != 7); |
| |
| for (i = 0; i < ARRAY_SIZE(default_queue_to_tx_fifo); i++) { |
| int ac = default_queue_to_tx_fifo[i]; |
| |
| il_txq_ctx_activate(il, i); |
| |
| if (ac == IL_TX_FIFO_UNUSED) |
| continue; |
| |
| il4965_tx_queue_set_status(il, &il->txq[i], ac, 0); |
| } |
| |
| spin_unlock_irqrestore(&il->lock, flags); |
| |
| return 0; |
| } |
| |
| /** |
| * il4965_alive_start - called after N_ALIVE notification received |
| * from protocol/runtime uCode (initialization uCode's |
| * Alive gets handled by il_init_alive_start()). |
| */ |
| static void |
| il4965_alive_start(struct il_priv *il) |
| { |
| int ret = 0; |
| |
| D_INFO("Runtime Alive received.\n"); |
| |
| if (il->card_alive.is_valid != UCODE_VALID_OK) { |
| /* We had an error bringing up the hardware, so take it |
| * all the way back down so we can try again */ |
| D_INFO("Alive failed.\n"); |
| goto restart; |
| } |
| |
| /* Initialize uCode has loaded Runtime uCode ... verify inst image. |
| * This is a paranoid check, because we would not have gotten the |
| * "runtime" alive if code weren't properly loaded. */ |
| if (il4965_verify_ucode(il)) { |
| /* Runtime instruction load was bad; |
| * take it all the way back down so we can try again */ |
| D_INFO("Bad runtime uCode load.\n"); |
| goto restart; |
| } |
| |
| ret = il4965_alive_notify(il); |
| if (ret) { |
| IL_WARN("Could not complete ALIVE transition [ntf]: %d\n", ret); |
| goto restart; |
| } |
| |
| /* After the ALIVE response, we can send host commands to the uCode */ |
| set_bit(S_ALIVE, &il->status); |
| |
| /* Enable watchdog to monitor the driver tx queues */ |
| il_setup_watchdog(il); |
| |
| if (il_is_rfkill(il)) |
| return; |
| |
| ieee80211_wake_queues(il->hw); |
| |
| il->active_rate = RATES_MASK; |
| |
| il_power_update_mode(il, true); |
| D_INFO("Updated power mode\n"); |
| |
| if (il_is_associated(il)) { |
| struct il_rxon_cmd *active_rxon = |
| (struct il_rxon_cmd *)&il->active; |
| /* apply any changes in staging */ |
| il->staging.filter_flags |= RXON_FILTER_ASSOC_MSK; |
| active_rxon->filter_flags &= ~RXON_FILTER_ASSOC_MSK; |
| } else { |
| /* Initialize our rx_config data */ |
| il_connection_init_rx_config(il); |
| |
| if (il->ops->set_rxon_chain) |
| il->ops->set_rxon_chain(il); |
| } |
| |
| /* Configure bluetooth coexistence if enabled */ |
| il_send_bt_config(il); |
| |
| il4965_reset_run_time_calib(il); |
| |
| set_bit(S_READY, &il->status); |
| |
| /* Configure the adapter for unassociated operation */ |
| il_commit_rxon(il); |
| |
| /* At this point, the NIC is initialized and operational */ |
| il4965_rf_kill_ct_config(il); |
| |
| D_INFO("ALIVE processing complete.\n"); |
| wake_up(&il->wait_command_queue); |
| |
| return; |
| |
| restart: |
| queue_work(il->workqueue, &il->restart); |
| } |
| |
| static void il4965_cancel_deferred_work(struct il_priv *il); |
| |
| static void |
| __il4965_down(struct il_priv *il) |
| { |
| unsigned long flags; |
| int exit_pending; |
| |
| D_INFO(DRV_NAME " is going down\n"); |
| |
| il_scan_cancel_timeout(il, 200); |
| |
| exit_pending = test_and_set_bit(S_EXIT_PENDING, &il->status); |
| |
| /* Stop TX queues watchdog. We need to have S_EXIT_PENDING bit set |
| * to prevent rearm timer */ |
| del_timer_sync(&il->watchdog); |
| |
| il_clear_ucode_stations(il); |
| |
| /* FIXME: race conditions ? */ |
| spin_lock_irq(&il->sta_lock); |
| /* |
| * Remove all key information that is not stored as part |
| * of station information since mac80211 may not have had |
| * a chance to remove all the keys. When device is |
| * reconfigured by mac80211 after an error all keys will |
| * be reconfigured. |
| */ |
| memset(il->_4965.wep_keys, 0, sizeof(il->_4965.wep_keys)); |
| il->_4965.key_mapping_keys = 0; |
| spin_unlock_irq(&il->sta_lock); |
| |
| il_dealloc_bcast_stations(il); |
| il_clear_driver_stations(il); |
| |
| /* Unblock any waiting calls */ |
| wake_up_all(&il->wait_command_queue); |
| |
| /* Wipe out the EXIT_PENDING status bit if we are not actually |
| * exiting the module */ |
| if (!exit_pending) |
| clear_bit(S_EXIT_PENDING, &il->status); |
| |
| /* stop and reset the on-board processor */ |
| _il_wr(il, CSR_RESET, CSR_RESET_REG_FLAG_NEVO_RESET); |
| |
| /* tell the device to stop sending interrupts */ |
| spin_lock_irqsave(&il->lock, flags); |
| il_disable_interrupts(il); |
| spin_unlock_irqrestore(&il->lock, flags); |
| il4965_synchronize_irq(il); |
| |
| if (il->mac80211_registered) |
| ieee80211_stop_queues(il->hw); |
| |
| /* If we have not previously called il_init() then |
| * clear all bits but the RF Kill bit and return */ |
| if (!il_is_init(il)) { |
| il->status = |
| test_bit(S_RFKILL, &il->status) << S_RFKILL | |
| test_bit(S_GEO_CONFIGURED, &il->status) << S_GEO_CONFIGURED | |
| test_bit(S_EXIT_PENDING, &il->status) << S_EXIT_PENDING; |
| goto exit; |
| } |
| |
| /* ...otherwise clear out all the status bits but the RF Kill |
| * bit and continue taking the NIC down. */ |
| il->status &= |
| test_bit(S_RFKILL, &il->status) << S_RFKILL | |
| test_bit(S_GEO_CONFIGURED, &il->status) << S_GEO_CONFIGURED | |
| test_bit(S_FW_ERROR, &il->status) << S_FW_ERROR | |
| test_bit(S_EXIT_PENDING, &il->status) << S_EXIT_PENDING; |
| |
| /* |
| * We disabled and synchronized interrupt, and priv->mutex is taken, so |
| * here is the only thread which will program device registers, but |
| * still have lockdep assertions, so we are taking reg_lock. |
| */ |
| spin_lock_irq(&il->reg_lock); |
| /* FIXME: il_grab_nic_access if rfkill is off ? */ |
| |
| il4965_txq_ctx_stop(il); |
| il4965_rxq_stop(il); |
| /* Power-down device's busmaster DMA clocks */ |
| _il_wr_prph(il, APMG_CLK_DIS_REG, APMG_CLK_VAL_DMA_CLK_RQT); |
| udelay(5); |
| /* Make sure (redundant) we've released our request to stay awake */ |
| _il_clear_bit(il, CSR_GP_CNTRL, CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ); |
| /* Stop the device, and put it in low power state */ |
| _il_apm_stop(il); |
| |
| spin_unlock_irq(&il->reg_lock); |
| |
| il4965_txq_ctx_unmap(il); |
| exit: |
| memset(&il->card_alive, 0, sizeof(struct il_alive_resp)); |
| |
| dev_kfree_skb(il->beacon_skb); |
| il->beacon_skb = NULL; |
| |
| /* clear out any free frames */ |
| il4965_clear_free_frames(il); |
| } |
| |
| static void |
| il4965_down(struct il_priv *il) |
| { |
| mutex_lock(&il->mutex); |
| __il4965_down(il); |
| mutex_unlock(&il->mutex); |
| |
| il4965_cancel_deferred_work(il); |
| } |
| |
| |
| static void |
| il4965_set_hw_ready(struct il_priv *il) |
| { |
| int ret; |
| |
| il_set_bit(il, CSR_HW_IF_CONFIG_REG, |
| CSR_HW_IF_CONFIG_REG_BIT_NIC_READY); |
| |
| /* See if we got it */ |
| ret = _il_poll_bit(il, CSR_HW_IF_CONFIG_REG, |
| CSR_HW_IF_CONFIG_REG_BIT_NIC_READY, |
| CSR_HW_IF_CONFIG_REG_BIT_NIC_READY, |
| 100); |
| if (ret >= 0) |
| il->hw_ready = true; |
| |
| D_INFO("hardware %s ready\n", (il->hw_ready) ? "" : "not"); |
| } |
| |
| static void |
| il4965_prepare_card_hw(struct il_priv *il) |
| { |
| int ret; |
| |
| il->hw_ready = false; |
| |
| il4965_set_hw_ready(il); |
| if (il->hw_ready) |
| return; |
| |
| /* If HW is not ready, prepare the conditions to check again */ |
| il_set_bit(il, CSR_HW_IF_CONFIG_REG, CSR_HW_IF_CONFIG_REG_PREPARE); |
| |
| ret = |
| _il_poll_bit(il, CSR_HW_IF_CONFIG_REG, |
| ~CSR_HW_IF_CONFIG_REG_BIT_NIC_PREPARE_DONE, |
| CSR_HW_IF_CONFIG_REG_BIT_NIC_PREPARE_DONE, 150000); |
| |
| /* HW should be ready by now, check again. */ |
| if (ret != -ETIMEDOUT) |
| il4965_set_hw_ready(il); |
| } |
| |
| #define MAX_HW_RESTARTS 5 |
| |
| static int |
| __il4965_up(struct il_priv *il) |
| { |
| int i; |
| int ret; |
| |
| if (test_bit(S_EXIT_PENDING, &il->status)) { |
| IL_WARN("Exit pending; will not bring the NIC up\n"); |
| return -EIO; |
| } |
| |
| if (!il->ucode_data_backup.v_addr || !il->ucode_data.v_addr) { |
| IL_ERR("ucode not available for device bringup\n"); |
| return -EIO; |
| } |
| |
| ret = il4965_alloc_bcast_station(il); |
| if (ret) { |
| il_dealloc_bcast_stations(il); |
| return ret; |
| } |
| |
| il4965_prepare_card_hw(il); |
| if (!il->hw_ready) { |
| IL_ERR("HW not ready\n"); |
| return -EIO; |
| } |
| |
| /* If platform's RF_KILL switch is NOT set to KILL */ |
| if (_il_rd(il, CSR_GP_CNTRL) & CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW) |
| clear_bit(S_RFKILL, &il->status); |
| else { |
| set_bit(S_RFKILL, &il->status); |
| wiphy_rfkill_set_hw_state(il->hw->wiphy, true); |
| |
| il_enable_rfkill_int(il); |
| IL_WARN("Radio disabled by HW RF Kill switch\n"); |
| return 0; |
| } |
| |
| _il_wr(il, CSR_INT, 0xFFFFFFFF); |
| |
| /* must be initialised before il_hw_nic_init */ |
| il->cmd_queue = IL_DEFAULT_CMD_QUEUE_NUM; |
| |
| ret = il4965_hw_nic_init(il); |
| if (ret) { |
| IL_ERR("Unable to init nic\n"); |
| return ret; |
| } |
| |
| /* make sure rfkill handshake bits are cleared */ |
| _il_wr(il, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL); |
| _il_wr(il, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_DRV_GP1_BIT_CMD_BLOCKED); |
| |
| /* clear (again), then enable host interrupts */ |
| _il_wr(il, CSR_INT, 0xFFFFFFFF); |
| il_enable_interrupts(il); |
| |
| /* really make sure rfkill handshake bits are cleared */ |
| _il_wr(il, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL); |
| _il_wr(il, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL); |
| |
| /* Copy original ucode data image from disk into backup cache. |
| * This will be used to initialize the on-board processor's |
| * data SRAM for a clean start when the runtime program first loads. */ |
| memcpy(il->ucode_data_backup.v_addr, il->ucode_data.v_addr, |
| il->ucode_data.len); |
| |
| for (i = 0; i < MAX_HW_RESTARTS; i++) { |
| |
| /* load bootstrap state machine, |
| * load bootstrap program into processor's memory, |
| * prepare to load the "initialize" uCode */ |
| ret = il->ops->load_ucode(il); |
| |
| if (ret) { |
| IL_ERR("Unable to set up bootstrap uCode: %d\n", ret); |
| continue; |
| } |
| |
| /* start card; "initialize" will load runtime ucode */ |
| il4965_nic_start(il); |
| |
| D_INFO(DRV_NAME " is coming up\n"); |
| |
| return 0; |
| } |
| |
| set_bit(S_EXIT_PENDING, &il->status); |
| __il4965_down(il); |
| clear_bit(S_EXIT_PENDING, &il->status); |
| |
| /* tried to restart and config the device for as long as our |
| * patience could withstand */ |
| IL_ERR("Unable to initialize device after %d attempts.\n", i); |
| return -EIO; |
| } |
| |
| /***************************************************************************** |
| * |
| * Workqueue callbacks |
| * |
| *****************************************************************************/ |
| |
| static void |
| il4965_bg_init_alive_start(struct work_struct *data) |
| { |
| struct il_priv *il = |
| container_of(data, struct il_priv, init_alive_start.work); |
| |
| mutex_lock(&il->mutex); |
| if (test_bit(S_EXIT_PENDING, &il->status)) |
| goto out; |
| |
| il->ops->init_alive_start(il); |
| out: |
| mutex_unlock(&il->mutex); |
| } |
| |
| static void |
| il4965_bg_alive_start(struct work_struct *data) |
| { |
| struct il_priv *il = |
| container_of(data, struct il_priv, alive_start.work); |
| |
| mutex_lock(&il->mutex); |
| if (test_bit(S_EXIT_PENDING, &il->status)) |
| goto out; |
| |
| il4965_alive_start(il); |
| out: |
| mutex_unlock(&il->mutex); |
| } |
| |
| static void |
| il4965_bg_run_time_calib_work(struct work_struct *work) |
| { |
| struct il_priv *il = container_of(work, struct il_priv, |
| run_time_calib_work); |
| |
| mutex_lock(&il->mutex); |
| |
| if (test_bit(S_EXIT_PENDING, &il->status) || |
| test_bit(S_SCANNING, &il->status)) { |
| mutex_unlock(&il->mutex); |
| return; |
| } |
| |
| if (il->start_calib) { |
| il4965_chain_noise_calibration(il, (void *)&il->_4965.stats); |
| il4965_sensitivity_calibration(il, (void *)&il->_4965.stats); |
| } |
| |
| mutex_unlock(&il->mutex); |
| } |
| |
| static void |
| il4965_bg_restart(struct work_struct *data) |
| { |
| struct il_priv *il = container_of(data, struct il_priv, restart); |
| |
| if (test_bit(S_EXIT_PENDING, &il->status)) |
| return; |
| |
| if (test_and_clear_bit(S_FW_ERROR, &il->status)) { |
| mutex_lock(&il->mutex); |
| il->is_open = 0; |
| |
| __il4965_down(il); |
| |
| mutex_unlock(&il->mutex); |
| il4965_cancel_deferred_work(il); |
| ieee80211_restart_hw(il->hw); |
| } else { |
| il4965_down(il); |
| |
| mutex_lock(&il->mutex); |
| if (test_bit(S_EXIT_PENDING, &il->status)) { |
| mutex_unlock(&il->mutex); |
| return; |
| } |
| |
| __il4965_up(il); |
| mutex_unlock(&il->mutex); |
| } |
| } |
| |
| static void |
| il4965_bg_rx_replenish(struct work_struct *data) |
| { |
| struct il_priv *il = container_of(data, struct il_priv, rx_replenish); |
| |
| if (test_bit(S_EXIT_PENDING, &il->status)) |
| return; |
| |
| mutex_lock(&il->mutex); |
| il4965_rx_replenish(il); |
| mutex_unlock(&il->mutex); |
| } |
| |
| /***************************************************************************** |
| * |
| * mac80211 entry point functions |
| * |
| *****************************************************************************/ |
| |
| #define UCODE_READY_TIMEOUT (4 * HZ) |
| |
| /* |
| * Not a mac80211 entry point function, but it fits in with all the |
| * other mac80211 functions grouped here. |
| */ |
| static int |
| il4965_mac_setup_register(struct il_priv *il, u32 max_probe_length) |
| { |
| int ret; |
| struct ieee80211_hw *hw = il->hw; |
| |
| hw->rate_control_algorithm = "iwl-4965-rs"; |
| |
| /* Tell mac80211 our characteristics */ |
| hw->flags = |
| IEEE80211_HW_SIGNAL_DBM | IEEE80211_HW_AMPDU_AGGREGATION | |
| IEEE80211_HW_NEED_DTIM_BEFORE_ASSOC | IEEE80211_HW_SPECTRUM_MGMT | |
| IEEE80211_HW_REPORTS_TX_ACK_STATUS | IEEE80211_HW_SUPPORTS_PS | |
| IEEE80211_HW_SUPPORTS_DYNAMIC_PS; |
| if (il->cfg->sku & IL_SKU_N) |
| hw->flags |= |
| IEEE80211_HW_SUPPORTS_DYNAMIC_SMPS | |
| IEEE80211_HW_SUPPORTS_STATIC_SMPS; |
| |
| hw->sta_data_size = sizeof(struct il_station_priv); |
| hw->vif_data_size = sizeof(struct il_vif_priv); |
| |
| hw->wiphy->interface_modes = |
| BIT(NL80211_IFTYPE_STATION) | BIT(NL80211_IFTYPE_ADHOC); |
| |
| hw->wiphy->flags |= WIPHY_FLAG_IBSS_RSN; |
| hw->wiphy->regulatory_flags |= REGULATORY_CUSTOM_REG | |
| REGULATORY_DISABLE_BEACON_HINTS; |
| |
| /* |
| * For now, disable PS by default because it affects |
| * RX performance significantly. |
| */ |
| hw->wiphy->flags &= ~WIPHY_FLAG_PS_ON_BY_DEFAULT; |
| |
| hw->wiphy->max_scan_ssids = PROBE_OPTION_MAX; |
| /* we create the 802.11 header and a zero-length SSID element */ |
| hw->wiphy->max_scan_ie_len = max_probe_length - 24 - 2; |
| |
| /* Default value; 4 EDCA QOS priorities */ |
| hw->queues = 4; |
| |
| hw->max_listen_interval = IL_CONN_MAX_LISTEN_INTERVAL; |
| |
| if (il->bands[IEEE80211_BAND_2GHZ].n_channels) |
| il->hw->wiphy->bands[IEEE80211_BAND_2GHZ] = |
| &il->bands[IEEE80211_BAND_2GHZ]; |
| if (il->bands[IEEE80211_BAND_5GHZ].n_channels) |
| il->hw->wiphy->bands[IEEE80211_BAND_5GHZ] = |
| &il->bands[IEEE80211_BAND_5GHZ]; |
| |
| il_leds_init(il); |
| |
| ret = ieee80211_register_hw(il->hw); |
| if (ret) { |
| IL_ERR("Failed to register hw (error %d)\n", ret); |
| return ret; |
| } |
| il->mac80211_registered = 1; |
| |
| return 0; |
| } |
| |
| int |
| il4965_mac_start(struct ieee80211_hw *hw) |
| { |
| struct il_priv *il = hw->priv; |
| int ret; |
| |
| D_MAC80211("enter\n"); |
| |
| /* we should be verifying the device is ready to be opened */ |
| mutex_lock(&il->mutex); |
| ret = __il4965_up(il); |
| mutex_unlock(&il->mutex); |
| |
| if (ret) |
| return ret; |
| |
| if (il_is_rfkill(il)) |
| goto out; |
| |
| D_INFO("Start UP work done.\n"); |
| |
| /* Wait for START_ALIVE from Run Time ucode. Otherwise callbacks from |
| * mac80211 will not be run successfully. */ |
| ret = wait_event_timeout(il->wait_command_queue, |
| test_bit(S_READY, &il->status), |
| UCODE_READY_TIMEOUT); |
| if (!ret) { |
| if (!test_bit(S_READY, &il->status)) { |
| IL_ERR("START_ALIVE timeout after %dms.\n", |
| jiffies_to_msecs(UCODE_READY_TIMEOUT)); |
| return -ETIMEDOUT; |
| } |
| } |
| |
| il4965_led_enable(il); |
| |
| out: |
| il->is_open = 1; |
| D_MAC80211("leave\n"); |
| return 0; |
| } |
| |
| void |
| il4965_mac_stop(struct ieee80211_hw *hw) |
| { |
| struct il_priv *il = hw->priv; |
| |
| D_MAC80211("enter\n"); |
| |
| if (!il->is_open) |
| return; |
| |
| il->is_open = 0; |
| |
| il4965_down(il); |
| |
| flush_workqueue(il->workqueue); |
| |
| /* User space software may expect getting rfkill changes |
| * even if interface is down */ |
| _il_wr(il, CSR_INT, 0xFFFFFFFF); |
| il_enable_rfkill_int(il); |
| |
| D_MAC80211("leave\n"); |
| } |
| |
| void |
| il4965_mac_tx(struct ieee80211_hw *hw, |
| struct ieee80211_tx_control *control, |
| struct sk_buff *skb) |
| { |
| struct il_priv *il = hw->priv; |
| |
| D_MACDUMP("enter\n"); |
| |
| D_TX("dev->xmit(%d bytes) at rate 0x%02x\n", skb->len, |
| ieee80211_get_tx_rate(hw, IEEE80211_SKB_CB(skb))->bitrate); |
| |
| if (il4965_tx_skb(il, control->sta, skb)) |
| dev_kfree_skb_any(skb); |
| |
| D_MACDUMP("leave\n"); |
| } |
| |
| void |
| il4965_mac_update_tkip_key(struct ieee80211_hw *hw, struct ieee80211_vif *vif, |
| struct ieee80211_key_conf *keyconf, |
| struct ieee80211_sta *sta, u32 iv32, u16 * phase1key) |
| { |
| struct il_priv *il = hw->priv; |
| |
| D_MAC80211("enter\n"); |
| |
| il4965_update_tkip_key(il, keyconf, sta, iv32, phase1key); |
| |
| D_MAC80211("leave\n"); |
| } |
| |
| int |
| il4965_mac_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd, |
| struct ieee80211_vif *vif, struct ieee80211_sta *sta, |
| struct ieee80211_key_conf *key) |
| { |
| struct il_priv *il = hw->priv; |
| int ret; |
| u8 sta_id; |
| bool is_default_wep_key = false; |
| |
| D_MAC80211("enter\n"); |
| |
| if (il->cfg->mod_params->sw_crypto) { |
| D_MAC80211("leave - hwcrypto disabled\n"); |
| return -EOPNOTSUPP; |
| } |
| |
| /* |
| * To support IBSS RSN, don't program group keys in IBSS, the |
| * hardware will then not attempt to decrypt the frames. |
| */ |
| if (vif->type == NL80211_IFTYPE_ADHOC && |
| !(key->flags & IEEE80211_KEY_FLAG_PAIRWISE)) { |
| D_MAC80211("leave - ad-hoc group key\n"); |
| return -EOPNOTSUPP; |
| } |
| |
| sta_id = il_sta_id_or_broadcast(il, sta); |
| if (sta_id == IL_INVALID_STATION) |
| return -EINVAL; |
| |
| mutex_lock(&il->mutex); |
| il_scan_cancel_timeout(il, 100); |
| |
| /* |
| * If we are getting WEP group key and we didn't receive any key mapping |
| * so far, we are in legacy wep mode (group key only), otherwise we are |
| * in 1X mode. |
| * In legacy wep mode, we use another host command to the uCode. |
| */ |
| if ((key->cipher == WLAN_CIPHER_SUITE_WEP40 || |
| key->cipher == WLAN_CIPHER_SUITE_WEP104) && !sta) { |
| if (cmd == SET_KEY) |
| is_default_wep_key = !il->_4965.key_mapping_keys; |
| else |
| is_default_wep_key = |
| (key->hw_key_idx == HW_KEY_DEFAULT); |
| } |
| |
| switch (cmd) { |
| case SET_KEY: |
| if (is_default_wep_key) |
| ret = il4965_set_default_wep_key(il, key); |
| else |
| ret = il4965_set_dynamic_key(il, key, sta_id); |
| |
| D_MAC80211("enable hwcrypto key\n"); |
| break; |
| case DISABLE_KEY: |
| if (is_default_wep_key) |
| ret = il4965_remove_default_wep_key(il, key); |
| else |
| ret = il4965_remove_dynamic_key(il, key, sta_id); |
| |
| D_MAC80211("disable hwcrypto key\n"); |
| break; |
| default: |
| ret = -EINVAL; |
| } |
| |
| mutex_unlock(&il->mutex); |
| D_MAC80211("leave\n"); |
| |
| return ret; |
| } |
| |
| int |
| il4965_mac_ampdu_action(struct ieee80211_hw *hw, struct ieee80211_vif *vif, |
| enum ieee80211_ampdu_mlme_action action, |
| struct ieee80211_sta *sta, u16 tid, u16 * ssn, |
| u8 buf_size) |
| { |
| struct il_priv *il = hw->priv; |
| int ret = -EINVAL; |
| |
| D_HT("A-MPDU action on addr %pM tid %d\n", sta->addr, tid); |
| |
| if (!(il->cfg->sku & IL_SKU_N)) |
| return -EACCES; |
| |
| mutex_lock(&il->mutex); |
| |
| switch (action) { |
| case IEEE80211_AMPDU_RX_START: |
| D_HT("start Rx\n"); |
| ret = il4965_sta_rx_agg_start(il, sta, tid, *ssn); |
| break; |
| case IEEE80211_AMPDU_RX_STOP: |
| D_HT("stop Rx\n"); |
| ret = il4965_sta_rx_agg_stop(il, sta, tid); |
| if (test_bit(S_EXIT_PENDING, &il->status)) |
| ret = 0; |
| break; |
| case IEEE80211_AMPDU_TX_START: |
| D_HT("start Tx\n"); |
| ret = il4965_tx_agg_start(il, vif, sta, tid, ssn); |
| break; |
| case IEEE80211_AMPDU_TX_STOP_CONT: |
| case IEEE80211_AMPDU_TX_STOP_FLUSH: |
| case IEEE80211_AMPDU_TX_STOP_FLUSH_CONT: |
| D_HT("stop Tx\n"); |
| ret = il4965_tx_agg_stop(il, vif, sta, tid); |
| if (test_bit(S_EXIT_PENDING, &il->status)) |
| ret = 0; |
| break; |
| case IEEE80211_AMPDU_TX_OPERATIONAL: |
| ret = 0; |
| break; |
| } |
| mutex_unlock(&il->mutex); |
| |
| return ret; |
| } |
| |
| int |
| il4965_mac_sta_add(struct ieee80211_hw *hw, struct ieee80211_vif *vif, |
| struct ieee80211_sta *sta) |
| { |
| struct il_priv *il = hw->priv; |
| struct il_station_priv *sta_priv = (void *)sta->drv_priv; |
| bool is_ap = vif->type == NL80211_IFTYPE_STATION; |
| int ret; |
| u8 sta_id; |
| |
| D_INFO("received request to add station %pM\n", sta->addr); |
| mutex_lock(&il->mutex); |
| D_INFO("proceeding to add station %pM\n", sta->addr); |
| sta_priv->common.sta_id = IL_INVALID_STATION; |
| |
| atomic_set(&sta_priv->pending_frames, 0); |
| |
| ret = |
| il_add_station_common(il, sta->addr, is_ap, sta, &sta_id); |
| if (ret) { |
| IL_ERR("Unable to add station %pM (%d)\n", sta->addr, ret); |
| /* Should we return success if return code is EEXIST ? */ |
| mutex_unlock(&il->mutex); |
| return ret; |
| } |
| |
| sta_priv->common.sta_id = sta_id; |
| |
| /* Initialize rate scaling */ |
| D_INFO("Initializing rate scaling for station %pM\n", sta->addr); |
| il4965_rs_rate_init(il, sta, sta_id); |
| mutex_unlock(&il->mutex); |
| |
| return 0; |
| } |
| |
| void |
| il4965_mac_channel_switch(struct ieee80211_hw *hw, |
| struct ieee80211_channel_switch *ch_switch) |
| { |
| struct il_priv *il = hw->priv; |
| const struct il_channel_info *ch_info; |
| struct ieee80211_conf *conf = &hw->conf; |
| struct ieee80211_channel *channel = ch_switch->chandef.chan; |
| struct il_ht_config *ht_conf = &il->current_ht_config; |
| u16 ch; |
| |
| D_MAC80211("enter\n"); |
| |
| mutex_lock(&il->mutex); |
| |
| if (il_is_rfkill(il)) |
| goto out; |
| |
| if (test_bit(S_EXIT_PENDING, &il->status) || |
| test_bit(S_SCANNING, &il->status) || |
| test_bit(S_CHANNEL_SWITCH_PENDING, &il->status)) |
| goto out; |
| |
| if (!il_is_associated(il)) |
| goto out; |
| |
| if (!il->ops->set_channel_switch) |
| goto out; |
| |
| ch = channel->hw_value; |
| if (le16_to_cpu(il->active.channel) == ch) |
| goto out; |
| |
| ch_info = il_get_channel_info(il, channel->band, ch); |
| if (!il_is_channel_valid(ch_info)) { |
| D_MAC80211("invalid channel\n"); |
| goto out; |
| } |
| |
| spin_lock_irq(&il->lock); |
| |
| il->current_ht_config.smps = conf->smps_mode; |
| |
| /* Configure HT40 channels */ |
| switch (cfg80211_get_chandef_type(&ch_switch->chandef)) { |
| case NL80211_CHAN_NO_HT: |
| case NL80211_CHAN_HT20: |
| il->ht.is_40mhz = false; |
| il->ht.extension_chan_offset = IEEE80211_HT_PARAM_CHA_SEC_NONE; |
| break; |
| case NL80211_CHAN_HT40MINUS: |
| il->ht.extension_chan_offset = IEEE80211_HT_PARAM_CHA_SEC_BELOW; |
| il->ht.is_40mhz = true; |
| break; |
| case NL80211_CHAN_HT40PLUS: |
| il->ht.extension_chan_offset = IEEE80211_HT_PARAM_CHA_SEC_ABOVE; |
| il->ht.is_40mhz = true; |
| break; |
| } |
| |
| if ((le16_to_cpu(il->staging.channel) != ch)) |
| il->staging.flags = 0; |
| |
| il_set_rxon_channel(il, channel); |
| il_set_rxon_ht(il, ht_conf); |
| il_set_flags_for_band(il, channel->band, il->vif); |
| |
| spin_unlock_irq(&il->lock); |
| |
| il_set_rate(il); |
| /* |
| * at this point, staging_rxon has the |
| * configuration for channel switch |
| */ |
| set_bit(S_CHANNEL_SWITCH_PENDING, &il->status); |
| il->switch_channel = cpu_to_le16(ch); |
| if (il->ops->set_channel_switch(il, ch_switch)) { |
| clear_bit(S_CHANNEL_SWITCH_PENDING, &il->status); |
| il->switch_channel = 0; |
| ieee80211_chswitch_done(il->vif, false); |
| } |
| |
| out: |
| mutex_unlock(&il->mutex); |
| D_MAC80211("leave\n"); |
| } |
| |
| void |
| il4965_configure_filter(struct ieee80211_hw *hw, unsigned int changed_flags, |
| unsigned int *total_flags, u64 multicast) |
| { |
| struct il_priv *il = hw->priv; |
| __le32 filter_or = 0, filter_nand = 0; |
| |
| #define CHK(test, flag) do { \ |
| if (*total_flags & (test)) \ |
| filter_or |= (flag); \ |
| else \ |
| filter_nand |= (flag); \ |
| } while (0) |
| |
| D_MAC80211("Enter: changed: 0x%x, total: 0x%x\n", changed_flags, |
| *total_flags); |
| |
| CHK(FIF_OTHER_BSS | FIF_PROMISC_IN_BSS, RXON_FILTER_PROMISC_MSK); |
| /* Setting _just_ RXON_FILTER_CTL2HOST_MSK causes FH errors */ |
| CHK(FIF_CONTROL, RXON_FILTER_CTL2HOST_MSK | RXON_FILTER_PROMISC_MSK); |
| CHK(FIF_BCN_PRBRESP_PROMISC, RXON_FILTER_BCON_AWARE_MSK); |
| |
| #undef CHK |
| |
| mutex_lock(&il->mutex); |
| |
| il->staging.filter_flags &= ~filter_nand; |
| il->staging.filter_flags |= filter_or; |
| |
| /* |
| * Not committing directly because hardware can perform a scan, |
| * but we'll eventually commit the filter flags change anyway. |
| */ |
| |
| mutex_unlock(&il->mutex); |
| |
| /* |
| * Receiving all multicast frames is always enabled by the |
| * default flags setup in il_connection_init_rx_config() |
| * since we currently do not support programming multicast |
| * filters into the device. |
| */ |
| *total_flags &= |
| FIF_OTHER_BSS | FIF_ALLMULTI | FIF_PROMISC_IN_BSS | |
| FIF_BCN_PRBRESP_PROMISC | FIF_CONTROL; |
| } |
| |
| /***************************************************************************** |
| * |
| * driver setup and teardown |
| * |
| *****************************************************************************/ |
| |
| static void |
| il4965_bg_txpower_work(struct work_struct *work) |
| { |
| struct il_priv *il = container_of(work, struct il_priv, |
| txpower_work); |
| |
| mutex_lock(&il->mutex); |
| |
| /* If a scan happened to start before we got here |
| * then just return; the stats notification will |
| * kick off another scheduled work to compensate for |
| * any temperature delta we missed here. */ |
| if (test_bit(S_EXIT_PENDING, &il->status) || |
| test_bit(S_SCANNING, &il->status)) |
| goto out; |
| |
| /* Regardless of if we are associated, we must reconfigure the |
| * TX power since frames can be sent on non-radar channels while |
| * not associated */ |
| il->ops->send_tx_power(il); |
| |
| /* Update last_temperature to keep is_calib_needed from running |
| * when it isn't needed... */ |
| il->last_temperature = il->temperature; |
| out: |
| mutex_unlock(&il->mutex); |
| } |
| |
| static void |
| il4965_setup_deferred_work(struct il_priv *il) |
| { |
| il->workqueue = create_singlethread_workqueue(DRV_NAME); |
| |
| init_waitqueue_head(&il->wait_command_queue); |
| |
| INIT_WORK(&il->restart, il4965_bg_restart); |
| INIT_WORK(&il->rx_replenish, il4965_bg_rx_replenish); |
| INIT_WORK(&il->run_time_calib_work, il4965_bg_run_time_calib_work); |
| INIT_DELAYED_WORK(&il->init_alive_start, il4965_bg_init_alive_start); |
| INIT_DELAYED_WORK(&il->alive_start, il4965_bg_alive_start); |
| |
| il_setup_scan_deferred_work(il); |
| |
| INIT_WORK(&il->txpower_work, il4965_bg_txpower_work); |
| |
| init_timer(&il->stats_periodic); |
| il->stats_periodic.data = (unsigned long)il; |
| il->stats_periodic.function = il4965_bg_stats_periodic; |
| |
| init_timer(&il->watchdog); |
| il->watchdog.data = (unsigned long)il; |
| il->watchdog.function = il_bg_watchdog; |
| |
| tasklet_init(&il->irq_tasklet, |
| (void (*)(unsigned long))il4965_irq_tasklet, |
| (unsigned long)il); |
| } |
| |
| static void |
| il4965_cancel_deferred_work(struct il_priv *il) |
| { |
| cancel_work_sync(&il->txpower_work); |
| cancel_delayed_work_sync(&il->init_alive_start); |
| cancel_delayed_work(&il->alive_start); |
| cancel_work_sync(&il->run_time_calib_work); |
| |
| il_cancel_scan_deferred_work(il); |
| |
| del_timer_sync(&il->stats_periodic); |
| } |
| |
| static void |
| il4965_init_hw_rates(struct il_priv *il, struct ieee80211_rate *rates) |
| { |
| int i; |
| |
| for (i = 0; i < RATE_COUNT_LEGACY; i++) { |
| rates[i].bitrate = il_rates[i].ieee * 5; |
| rates[i].hw_value = i; /* Rate scaling will work on idxes */ |
| rates[i].hw_value_short = i; |
| rates[i].flags = 0; |
| if ((i >= IL_FIRST_CCK_RATE) && (i <= IL_LAST_CCK_RATE)) { |
| /* |
| * If CCK != 1M then set short preamble rate flag. |
| */ |
| rates[i].flags |= |
| (il_rates[i].plcp == |
| RATE_1M_PLCP) ? 0 : IEEE80211_RATE_SHORT_PREAMBLE; |
| } |
| } |
| } |
| |
| /* |
| * Acquire il->lock before calling this function ! |
| */ |
| void |
| il4965_set_wr_ptrs(struct il_priv *il, int txq_id, u32 idx) |
| { |
| il_wr(il, HBUS_TARG_WRPTR, (idx & 0xff) | (txq_id << 8)); |
| il_wr_prph(il, IL49_SCD_QUEUE_RDPTR(txq_id), idx); |
| } |
| |
| void |
| il4965_tx_queue_set_status(struct il_priv *il, struct il_tx_queue *txq, |
| int tx_fifo_id, int scd_retry) |
| { |
| int txq_id = txq->q.id; |
| |
| /* Find out whether to activate Tx queue */ |
| int active = test_bit(txq_id, &il->txq_ctx_active_msk) ? 1 : 0; |
| |
| /* Set up and activate */ |
| il_wr_prph(il, IL49_SCD_QUEUE_STATUS_BITS(txq_id), |
| (active << IL49_SCD_QUEUE_STTS_REG_POS_ACTIVE) | |
| (tx_fifo_id << IL49_SCD_QUEUE_STTS_REG_POS_TXF) | |
| (scd_retry << IL49_SCD_QUEUE_STTS_REG_POS_WSL) | |
| (scd_retry << IL49_SCD_QUEUE_STTS_REG_POS_SCD_ACK) | |
| IL49_SCD_QUEUE_STTS_REG_MSK); |
| |
| txq->sched_retry = scd_retry; |
| |
| D_INFO("%s %s Queue %d on AC %d\n", active ? "Activate" : "Deactivate", |
| scd_retry ? "BA" : "AC", txq_id, tx_fifo_id); |
| } |
| |
| static const struct ieee80211_ops il4965_mac_ops = { |
| .tx = il4965_mac_tx, |
| .start = il4965_mac_start, |
| .stop = il4965_mac_stop, |
| .add_interface = il_mac_add_interface, |
| .remove_interface = il_mac_remove_interface, |
| .change_interface = il_mac_change_interface, |
| .config = il_mac_config, |
| .configure_filter = il4965_configure_filter, |
| .set_key = il4965_mac_set_key, |
| .update_tkip_key = il4965_mac_update_tkip_key, |
| .conf_tx = il_mac_conf_tx, |
| .reset_tsf = il_mac_reset_tsf, |
| .bss_info_changed = il_mac_bss_info_changed, |
| .ampdu_action = il4965_mac_ampdu_action, |
| .hw_scan = il_mac_hw_scan, |
| .sta_add = il4965_mac_sta_add, |
| .sta_remove = il_mac_sta_remove, |
| .channel_switch = il4965_mac_channel_switch, |
| .tx_last_beacon = il_mac_tx_last_beacon, |
| .flush = il_mac_flush, |
| }; |
| |
| static int |
| il4965_init_drv(struct il_priv *il) |
| { |
| int ret; |
| |
| spin_lock_init(&il->sta_lock); |
| spin_lock_init(&il->hcmd_lock); |
| |
| INIT_LIST_HEAD(&il->free_frames); |
| |
| mutex_init(&il->mutex); |
| |
| il->ieee_channels = NULL; |
| il->ieee_rates = NULL; |
| il->band = IEEE80211_BAND_2GHZ; |
| |
| il->iw_mode = NL80211_IFTYPE_STATION; |
| il->current_ht_config.smps = IEEE80211_SMPS_STATIC; |
| il->missed_beacon_threshold = IL_MISSED_BEACON_THRESHOLD_DEF; |
| |
| /* initialize force reset */ |
| il->force_reset.reset_duration = IL_DELAY_NEXT_FORCE_FW_RELOAD; |
| |
| /* Choose which receivers/antennas to use */ |
| if (il->ops->set_rxon_chain) |
| il->ops->set_rxon_chain(il); |
| |
| il_init_scan_params(il); |
| |
| ret = il_init_channel_map(il); |
| if (ret) { |
| IL_ERR("initializing regulatory failed: %d\n", ret); |
| goto err; |
| } |
| |
| ret = il_init_geos(il); |
| if (ret) { |
| IL_ERR("initializing geos failed: %d\n", ret); |
| goto err_free_channel_map; |
| } |
| il4965_init_hw_rates(il, il->ieee_rates); |
| |
| return 0; |
| |
| err_free_channel_map: |
| il_free_channel_map(il); |
| err: |
| return ret; |
| } |
| |
| static void |
| il4965_uninit_drv(struct il_priv *il) |
| { |
| il_free_geos(il); |
| il_free_channel_map(il); |
| kfree(il->scan_cmd); |
| } |
| |
| static void |
| il4965_hw_detect(struct il_priv *il) |
| { |
| il->hw_rev = _il_rd(il, CSR_HW_REV); |
| il->hw_wa_rev = _il_rd(il, CSR_HW_REV_WA_REG); |
| il->rev_id = il->pci_dev->revision; |
| D_INFO("HW Revision ID = 0x%X\n", il->rev_id); |
| } |
| |
| static struct il_sensitivity_ranges il4965_sensitivity = { |
| .min_nrg_cck = 97, |
| .max_nrg_cck = 0, /* not used, set to 0 */ |
| |
| .auto_corr_min_ofdm = 85, |
| .auto_corr_min_ofdm_mrc = 170, |
| .auto_corr_min_ofdm_x1 = 105, |
| .auto_corr_min_ofdm_mrc_x1 = 220, |
| |
| .auto_corr_max_ofdm = 120, |
| .auto_corr_max_ofdm_mrc = 210, |
| .auto_corr_max_ofdm_x1 = 140, |
| .auto_corr_max_ofdm_mrc_x1 = 270, |
| |
| .auto_corr_min_cck = 125, |
| .auto_corr_max_cck = 200, |
| .auto_corr_min_cck_mrc = 200, |
| .auto_corr_max_cck_mrc = 400, |
| |
| .nrg_th_cck = 100, |
| .nrg_th_ofdm = 100, |
| |
| .barker_corr_th_min = 190, |
| .barker_corr_th_min_mrc = 390, |
| .nrg_th_cca = 62, |
| }; |
| |
| static void |
| il4965_set_hw_params(struct il_priv *il) |
| { |
| il->hw_params.bcast_id = IL4965_BROADCAST_ID; |
| il->hw_params.max_rxq_size = RX_QUEUE_SIZE; |
| il->hw_params.max_rxq_log = RX_QUEUE_SIZE_LOG; |
| if (il->cfg->mod_params->amsdu_size_8K) |
| il->hw_params.rx_page_order = get_order(IL_RX_BUF_SIZE_8K); |
| else |
| il->hw_params.rx_page_order = get_order(IL_RX_BUF_SIZE_4K); |
| |
| il->hw_params.max_beacon_itrvl = IL_MAX_UCODE_BEACON_INTERVAL; |
| |
| if (il->cfg->mod_params->disable_11n) |
| il->cfg->sku &= ~IL_SKU_N; |
| |
| if (il->cfg->mod_params->num_of_queues >= IL_MIN_NUM_QUEUES && |
| il->cfg->mod_params->num_of_queues <= IL49_NUM_QUEUES) |
| il->cfg->num_of_queues = |
| il->cfg->mod_params->num_of_queues; |
| |
| il->hw_params.max_txq_num = il->cfg->num_of_queues; |
| il->hw_params.dma_chnl_num = FH49_TCSR_CHNL_NUM; |
| il->hw_params.scd_bc_tbls_size = |
| il->cfg->num_of_queues * |
| sizeof(struct il4965_scd_bc_tbl); |
| |
| il->hw_params.tfd_size = sizeof(struct il_tfd); |
| il->hw_params.max_stations = IL4965_STATION_COUNT; |
| il->hw_params.max_data_size = IL49_RTC_DATA_SIZE; |
| il->hw_params.max_inst_size = IL49_RTC_INST_SIZE; |
| il->hw_params.max_bsm_size = BSM_SRAM_SIZE; |
| il->hw_params.ht40_channel = BIT(IEEE80211_BAND_5GHZ); |
| |
| il->hw_params.rx_wrt_ptr_reg = FH49_RSCSR_CHNL0_WPTR; |
| |
| il->hw_params.tx_chains_num = il4965_num_of_ant(il->cfg->valid_tx_ant); |
| il->hw_params.rx_chains_num = il4965_num_of_ant(il->cfg->valid_rx_ant); |
| il->hw_params.valid_tx_ant = il->cfg->valid_tx_ant; |
| il->hw_params.valid_rx_ant = il->cfg->valid_rx_ant; |
| |
| il->hw_params.ct_kill_threshold = |
| CELSIUS_TO_KELVIN(CT_KILL_THRESHOLD_LEGACY); |
| |
| il->hw_params.sens = &il4965_sensitivity; |
| il->hw_params.beacon_time_tsf_bits = IL4965_EXT_BEACON_TIME_POS; |
| } |
| |
| static int |
| il4965_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent) |
| { |
| int err = 0; |
| struct il_priv *il; |
| struct ieee80211_hw *hw; |
| struct il_cfg *cfg = (struct il_cfg *)(ent->driver_data); |
| unsigned long flags; |
| u16 pci_cmd; |
| |
| /************************ |
| * 1. Allocating HW data |
| ************************/ |
| |
| hw = ieee80211_alloc_hw(sizeof(struct il_priv), &il4965_mac_ops); |
| if (!hw) { |
| err = -ENOMEM; |
| goto out; |
| } |
| il = hw->priv; |
| il->hw = hw; |
| SET_IEEE80211_DEV(hw, &pdev->dev); |
| |
| D_INFO("*** LOAD DRIVER ***\n"); |
| il->cfg = cfg; |
| il->ops = &il4965_ops; |
| #ifdef CONFIG_IWLEGACY_DEBUGFS |
| il->debugfs_ops = &il4965_debugfs_ops; |
| #endif |
| il->pci_dev = pdev; |
| il->inta_mask = CSR_INI_SET_MASK; |
| |
| /************************** |
| * 2. Initializing PCI bus |
| **************************/ |
| pci_disable_link_state(pdev, |
| PCIE_LINK_STATE_L0S | PCIE_LINK_STATE_L1 | |
| PCIE_LINK_STATE_CLKPM); |
| |
| if (pci_enable_device(pdev)) { |
| err = -ENODEV; |
| goto out_ieee80211_free_hw; |
| } |
| |
| pci_set_master(pdev); |
| |
| err = pci_set_dma_mask(pdev, DMA_BIT_MASK(36)); |
| if (!err) |
| err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(36)); |
| if (err) { |
| err = pci_set_dma_mask(pdev, DMA_BIT_MASK(32)); |
| if (!err) |
| err = |
| pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32)); |
| /* both attempts failed: */ |
| if (err) { |
| IL_WARN("No suitable DMA available.\n"); |
| goto out_pci_disable_device; |
| } |
| } |
| |
| err = pci_request_regions(pdev, DRV_NAME); |
| if (err) |
| goto out_pci_disable_device; |
| |
| pci_set_drvdata(pdev, il); |
| |
| /*********************** |
| * 3. Read REV register |
| ***********************/ |
| il->hw_base = pci_ioremap_bar(pdev, 0); |
| if (!il->hw_base) { |
| err = -ENODEV; |
| goto out_pci_release_regions; |
| } |
| |
| D_INFO("pci_resource_len = 0x%08llx\n", |
| (unsigned long long)pci_resource_len(pdev, 0)); |
| D_INFO("pci_resource_base = %p\n", il->hw_base); |
| |
| /* these spin locks will be used in apm_ops.init and EEPROM access |
| * we should init now |
| */ |
| spin_lock_init(&il->reg_lock); |
| spin_lock_init(&il->lock); |
| |
| /* |
| * stop and reset the on-board processor just in case it is in a |
| * strange state ... like being left stranded by a primary kernel |
| * and this is now the kdump kernel trying to start up |
| */ |
| _il_wr(il, CSR_RESET, CSR_RESET_REG_FLAG_NEVO_RESET); |
| |
| il4965_hw_detect(il); |
| IL_INFO("Detected %s, REV=0x%X\n", il->cfg->name, il->hw_rev); |
| |
| /* We disable the RETRY_TIMEOUT register (0x41) to keep |
| * PCI Tx retries from interfering with C3 CPU state */ |
| pci_write_config_byte(pdev, PCI_CFG_RETRY_TIMEOUT, 0x00); |
| |
| il4965_prepare_card_hw(il); |
| if (!il->hw_ready) { |
| IL_WARN("Failed, HW not ready\n"); |
| err = -EIO; |
| goto out_iounmap; |
| } |
| |
| /***************** |
| * 4. Read EEPROM |
| *****************/ |
| /* Read the EEPROM */ |
| err = il_eeprom_init(il); |
| if (err) { |
| IL_ERR("Unable to init EEPROM\n"); |
| goto out_iounmap; |
| } |
| err = il4965_eeprom_check_version(il); |
| if (err) |
| goto out_free_eeprom; |
| |
| /* extract MAC Address */ |
| il4965_eeprom_get_mac(il, il->addresses[0].addr); |
| D_INFO("MAC address: %pM\n", il->addresses[0].addr); |
| il->hw->wiphy->addresses = il->addresses; |
| il->hw->wiphy->n_addresses = 1; |
| |
| /************************ |
| * 5. Setup HW constants |
| ************************/ |
| il4965_set_hw_params(il); |
| |
| /******************* |
| * 6. Setup il |
| *******************/ |
| |
| err = il4965_init_drv(il); |
| if (err) |
| goto out_free_eeprom; |
| /* At this point both hw and il are initialized. */ |
| |
| /******************** |
| * 7. Setup services |
| ********************/ |
| spin_lock_irqsave(&il->lock, flags); |
| il_disable_interrupts(il); |
| spin_unlock_irqrestore(&il->lock, flags); |
| |
| pci_enable_msi(il->pci_dev); |
| |
| err = request_irq(il->pci_dev->irq, il_isr, IRQF_SHARED, DRV_NAME, il); |
| if (err) { |
| IL_ERR("Error allocating IRQ %d\n", il->pci_dev->irq); |
| goto out_disable_msi; |
| } |
| |
| il4965_setup_deferred_work(il); |
| il4965_setup_handlers(il); |
| |
| /********************************************* |
| * 8. Enable interrupts and read RFKILL state |
| *********************************************/ |
| |
| /* enable rfkill interrupt: hw bug w/a */ |
| pci_read_config_word(il->pci_dev, PCI_COMMAND, &pci_cmd); |
| if (pci_cmd & PCI_COMMAND_INTX_DISABLE) { |
| pci_cmd &= ~PCI_COMMAND_INTX_DISABLE; |
| pci_write_config_word(il->pci_dev, PCI_COMMAND, pci_cmd); |
| } |
| |
| il_enable_rfkill_int(il); |
| |
| /* If platform's RF_KILL switch is NOT set to KILL */ |
| if (_il_rd(il, CSR_GP_CNTRL) & CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW) |
| clear_bit(S_RFKILL, &il->status); |
| else |
| set_bit(S_RFKILL, &il->status); |
| |
| wiphy_rfkill_set_hw_state(il->hw->wiphy, |
| test_bit(S_RFKILL, &il->status)); |
| |
| il_power_initialize(il); |
| |
| init_completion(&il->_4965.firmware_loading_complete); |
| |
| err = il4965_request_firmware(il, true); |
| if (err) |
| goto out_destroy_workqueue; |
| |
| return 0; |
| |
| out_destroy_workqueue: |
| destroy_workqueue(il->workqueue); |
| il->workqueue = NULL; |
| free_irq(il->pci_dev->irq, il); |
| out_disable_msi: |
| pci_disable_msi(il->pci_dev); |
| il4965_uninit_drv(il); |
| out_free_eeprom: |
| il_eeprom_free(il); |
| out_iounmap: |
| iounmap(il->hw_base); |
| out_pci_release_regions: |
| pci_release_regions(pdev); |
| out_pci_disable_device: |
| pci_disable_device(pdev); |
| out_ieee80211_free_hw: |
| ieee80211_free_hw(il->hw); |
| out: |
| return err; |
| } |
| |
| static void |
| il4965_pci_remove(struct pci_dev *pdev) |
| { |
| struct il_priv *il = pci_get_drvdata(pdev); |
| unsigned long flags; |
| |
| if (!il) |
| return; |
| |
| wait_for_completion(&il->_4965.firmware_loading_complete); |
| |
| D_INFO("*** UNLOAD DRIVER ***\n"); |
| |
| il_dbgfs_unregister(il); |
| sysfs_remove_group(&pdev->dev.kobj, &il_attribute_group); |
| |
| /* ieee80211_unregister_hw call wil cause il_mac_stop to |
| * to be called and il4965_down since we are removing the device |
| * we need to set S_EXIT_PENDING bit. |
| */ |
| set_bit(S_EXIT_PENDING, &il->status); |
| |
| il_leds_exit(il); |
| |
| if (il->mac80211_registered) { |
| ieee80211_unregister_hw(il->hw); |
| il->mac80211_registered = 0; |
| } else { |
| il4965_down(il); |
| } |
| |
| /* |
| * Make sure device is reset to low power before unloading driver. |
| * This may be redundant with il4965_down(), but there are paths to |
| * run il4965_down() without calling apm_ops.stop(), and there are |
| * paths to avoid running il4965_down() at all before leaving driver. |
| * This (inexpensive) call *makes sure* device is reset. |
| */ |
| il_apm_stop(il); |
| |
| /* make sure we flush any pending irq or |
| * tasklet for the driver |
| */ |
| spin_lock_irqsave(&il->lock, flags); |
| il_disable_interrupts(il); |
| spin_unlock_irqrestore(&il->lock, flags); |
| |
| il4965_synchronize_irq(il); |
| |
| il4965_dealloc_ucode_pci(il); |
| |
| if (il->rxq.bd) |
| il4965_rx_queue_free(il, &il->rxq); |
| il4965_hw_txq_ctx_free(il); |
| |
| il_eeprom_free(il); |
| |
| /*netif_stop_queue(dev); */ |
| flush_workqueue(il->workqueue); |
| |
| /* ieee80211_unregister_hw calls il_mac_stop, which flushes |
| * il->workqueue... so we can't take down the workqueue |
| * until now... */ |
| destroy_workqueue(il->workqueue); |
| il->workqueue = NULL; |
| |
| free_irq(il->pci_dev->irq, il); |
| pci_disable_msi(il->pci_dev); |
| iounmap(il->hw_base); |
| pci_release_regions(pdev); |
| pci_disable_device(pdev); |
| |
| il4965_uninit_drv(il); |
| |
| dev_kfree_skb(il->beacon_skb); |
| |
| ieee80211_free_hw(il->hw); |
| } |
| |
| /* |
| * Activate/Deactivate Tx DMA/FIFO channels according tx fifos mask |
| * must be called under il->lock and mac access |
| */ |
| void |
| il4965_txq_set_sched(struct il_priv *il, u32 mask) |
| { |
| il_wr_prph(il, IL49_SCD_TXFACT, mask); |
| } |
| |
| /***************************************************************************** |
| * |
| * driver and module entry point |
| * |
| *****************************************************************************/ |
| |
| /* Hardware specific file defines the PCI IDs table for that hardware module */ |
| static const struct pci_device_id il4965_hw_card_ids[] = { |
| {IL_PCI_DEVICE(0x4229, PCI_ANY_ID, il4965_cfg)}, |
| {IL_PCI_DEVICE(0x4230, PCI_ANY_ID, il4965_cfg)}, |
| {0} |
| }; |
| MODULE_DEVICE_TABLE(pci, il4965_hw_card_ids); |
| |
| static struct pci_driver il4965_driver = { |
| .name = DRV_NAME, |
| .id_table = il4965_hw_card_ids, |
| .probe = il4965_pci_probe, |
| .remove = il4965_pci_remove, |
| .driver.pm = IL_LEGACY_PM_OPS, |
| }; |
| |
| static int __init |
| il4965_init(void) |
| { |
| |
| int ret; |
| pr_info(DRV_DESCRIPTION ", " DRV_VERSION "\n"); |
| pr_info(DRV_COPYRIGHT "\n"); |
| |
| ret = il4965_rate_control_register(); |
| if (ret) { |
| pr_err("Unable to register rate control algorithm: %d\n", ret); |
| return ret; |
| } |
| |
| ret = pci_register_driver(&il4965_driver); |
| if (ret) { |
| pr_err("Unable to initialize PCI module\n"); |
| goto error_register; |
| } |
| |
| return ret; |
| |
| error_register: |
| il4965_rate_control_unregister(); |
| return ret; |
| } |
| |
| static void __exit |
| il4965_exit(void) |
| { |
| pci_unregister_driver(&il4965_driver); |
| il4965_rate_control_unregister(); |
| } |
| |
| module_exit(il4965_exit); |
| module_init(il4965_init); |
| |
| #ifdef CONFIG_IWLEGACY_DEBUG |
| module_param_named(debug, il_debug_level, uint, S_IRUGO | S_IWUSR); |
| MODULE_PARM_DESC(debug, "debug output mask"); |
| #endif |
| |
| module_param_named(swcrypto, il4965_mod_params.sw_crypto, int, S_IRUGO); |
| MODULE_PARM_DESC(swcrypto, "using crypto in software (default 0 [hardware])"); |
| module_param_named(queues_num, il4965_mod_params.num_of_queues, int, S_IRUGO); |
| MODULE_PARM_DESC(queues_num, "number of hw queues."); |
| module_param_named(11n_disable, il4965_mod_params.disable_11n, int, S_IRUGO); |
| MODULE_PARM_DESC(11n_disable, "disable 11n functionality"); |
| module_param_named(amsdu_size_8K, il4965_mod_params.amsdu_size_8K, int, |
| S_IRUGO); |
| MODULE_PARM_DESC(amsdu_size_8K, "enable 8K amsdu size (default 0 [disabled])"); |
| module_param_named(fw_restart, il4965_mod_params.restart_fw, int, S_IRUGO); |
| MODULE_PARM_DESC(fw_restart, "restart firmware in case of error"); |