| /* |
| * f_subset.c -- "CDC Subset" Ethernet link function driver |
| * |
| * Copyright (C) 2003-2005,2008 David Brownell |
| * Copyright (C) 2008 Nokia Corporation |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| */ |
| |
| #include <linux/slab.h> |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/device.h> |
| #include <linux/etherdevice.h> |
| |
| #include "u_ether.h" |
| #include "u_ether_configfs.h" |
| #include "u_gether.h" |
| |
| /* |
| * This function packages a simple "CDC Subset" Ethernet port with no real |
| * control mechanisms; just raw data transfer over two bulk endpoints. |
| * The data transfer model is exactly that of CDC Ethernet, which is |
| * why we call it the "CDC Subset". |
| * |
| * Because it's not standardized, this has some interoperability issues. |
| * They mostly relate to driver binding, since the data transfer model is |
| * so simple (CDC Ethernet). The original versions of this protocol used |
| * specific product/vendor IDs: byteswapped IDs for Digital Equipment's |
| * SA-1100 "Itsy" board, which could run Linux 2.4 kernels and supported |
| * daughtercards with USB peripheral connectors. (It was used more often |
| * with other boards, using the Itsy identifiers.) Linux hosts recognized |
| * this with CONFIG_USB_ARMLINUX; these devices have only one configuration |
| * and one interface. |
| * |
| * At some point, MCCI defined a (nonconformant) CDC MDLM variant called |
| * "SAFE", which happens to have a mode which is identical to the "CDC |
| * Subset" in terms of data transfer and lack of control model. This was |
| * adopted by later Sharp Zaurus models, and by some other software which |
| * Linux hosts recognize with CONFIG_USB_NET_ZAURUS. |
| * |
| * Because Microsoft's RNDIS drivers are far from robust, we added a few |
| * descriptors to the CDC Subset code, making this code look like a SAFE |
| * implementation. This lets you use MCCI's host side MS-Windows drivers |
| * if you get fed up with RNDIS. It also makes it easier for composite |
| * drivers to work, since they can use class based binding instead of |
| * caring about specific product and vendor IDs. |
| */ |
| |
| struct f_gether { |
| struct gether port; |
| |
| char ethaddr[14]; |
| }; |
| |
| static inline struct f_gether *func_to_geth(struct usb_function *f) |
| { |
| return container_of(f, struct f_gether, port.func); |
| } |
| |
| /*-------------------------------------------------------------------------*/ |
| |
| /* |
| * "Simple" CDC-subset option is a simple vendor-neutral model that most |
| * full speed controllers can handle: one interface, two bulk endpoints. |
| * To assist host side drivers, we fancy it up a bit, and add descriptors so |
| * some host side drivers will understand it as a "SAFE" variant. |
| * |
| * "SAFE" loosely follows CDC WMC MDLM, violating the spec in various ways. |
| * Data endpoints live in the control interface, there's no data interface. |
| * And it's not used to talk to a cell phone radio. |
| */ |
| |
| /* interface descriptor: */ |
| |
| static struct usb_interface_descriptor subset_data_intf = { |
| .bLength = sizeof subset_data_intf, |
| .bDescriptorType = USB_DT_INTERFACE, |
| |
| /* .bInterfaceNumber = DYNAMIC */ |
| .bAlternateSetting = 0, |
| .bNumEndpoints = 2, |
| .bInterfaceClass = USB_CLASS_COMM, |
| .bInterfaceSubClass = USB_CDC_SUBCLASS_MDLM, |
| .bInterfaceProtocol = 0, |
| /* .iInterface = DYNAMIC */ |
| }; |
| |
| static struct usb_cdc_header_desc mdlm_header_desc = { |
| .bLength = sizeof mdlm_header_desc, |
| .bDescriptorType = USB_DT_CS_INTERFACE, |
| .bDescriptorSubType = USB_CDC_HEADER_TYPE, |
| |
| .bcdCDC = cpu_to_le16(0x0110), |
| }; |
| |
| static struct usb_cdc_mdlm_desc mdlm_desc = { |
| .bLength = sizeof mdlm_desc, |
| .bDescriptorType = USB_DT_CS_INTERFACE, |
| .bDescriptorSubType = USB_CDC_MDLM_TYPE, |
| |
| .bcdVersion = cpu_to_le16(0x0100), |
| .bGUID = { |
| 0x5d, 0x34, 0xcf, 0x66, 0x11, 0x18, 0x11, 0xd6, |
| 0xa2, 0x1a, 0x00, 0x01, 0x02, 0xca, 0x9a, 0x7f, |
| }, |
| }; |
| |
| /* since "usb_cdc_mdlm_detail_desc" is a variable length structure, we |
| * can't really use its struct. All we do here is say that we're using |
| * the submode of "SAFE" which directly matches the CDC Subset. |
| */ |
| static u8 mdlm_detail_desc[] = { |
| 6, |
| USB_DT_CS_INTERFACE, |
| USB_CDC_MDLM_DETAIL_TYPE, |
| |
| 0, /* "SAFE" */ |
| 0, /* network control capabilities (none) */ |
| 0, /* network data capabilities ("raw" encapsulation) */ |
| }; |
| |
| static struct usb_cdc_ether_desc ether_desc = { |
| .bLength = sizeof ether_desc, |
| .bDescriptorType = USB_DT_CS_INTERFACE, |
| .bDescriptorSubType = USB_CDC_ETHERNET_TYPE, |
| |
| /* this descriptor actually adds value, surprise! */ |
| /* .iMACAddress = DYNAMIC */ |
| .bmEthernetStatistics = cpu_to_le32(0), /* no statistics */ |
| .wMaxSegmentSize = cpu_to_le16(ETH_FRAME_LEN), |
| .wNumberMCFilters = cpu_to_le16(0), |
| .bNumberPowerFilters = 0, |
| }; |
| |
| /* full speed support: */ |
| |
| static struct usb_endpoint_descriptor fs_subset_in_desc = { |
| .bLength = USB_DT_ENDPOINT_SIZE, |
| .bDescriptorType = USB_DT_ENDPOINT, |
| |
| .bEndpointAddress = USB_DIR_IN, |
| .bmAttributes = USB_ENDPOINT_XFER_BULK, |
| }; |
| |
| static struct usb_endpoint_descriptor fs_subset_out_desc = { |
| .bLength = USB_DT_ENDPOINT_SIZE, |
| .bDescriptorType = USB_DT_ENDPOINT, |
| |
| .bEndpointAddress = USB_DIR_OUT, |
| .bmAttributes = USB_ENDPOINT_XFER_BULK, |
| }; |
| |
| static struct usb_descriptor_header *fs_eth_function[] = { |
| (struct usb_descriptor_header *) &subset_data_intf, |
| (struct usb_descriptor_header *) &mdlm_header_desc, |
| (struct usb_descriptor_header *) &mdlm_desc, |
| (struct usb_descriptor_header *) &mdlm_detail_desc, |
| (struct usb_descriptor_header *) ðer_desc, |
| (struct usb_descriptor_header *) &fs_subset_in_desc, |
| (struct usb_descriptor_header *) &fs_subset_out_desc, |
| NULL, |
| }; |
| |
| /* high speed support: */ |
| |
| static struct usb_endpoint_descriptor hs_subset_in_desc = { |
| .bLength = USB_DT_ENDPOINT_SIZE, |
| .bDescriptorType = USB_DT_ENDPOINT, |
| |
| .bmAttributes = USB_ENDPOINT_XFER_BULK, |
| .wMaxPacketSize = cpu_to_le16(512), |
| }; |
| |
| static struct usb_endpoint_descriptor hs_subset_out_desc = { |
| .bLength = USB_DT_ENDPOINT_SIZE, |
| .bDescriptorType = USB_DT_ENDPOINT, |
| |
| .bmAttributes = USB_ENDPOINT_XFER_BULK, |
| .wMaxPacketSize = cpu_to_le16(512), |
| }; |
| |
| static struct usb_descriptor_header *hs_eth_function[] = { |
| (struct usb_descriptor_header *) &subset_data_intf, |
| (struct usb_descriptor_header *) &mdlm_header_desc, |
| (struct usb_descriptor_header *) &mdlm_desc, |
| (struct usb_descriptor_header *) &mdlm_detail_desc, |
| (struct usb_descriptor_header *) ðer_desc, |
| (struct usb_descriptor_header *) &hs_subset_in_desc, |
| (struct usb_descriptor_header *) &hs_subset_out_desc, |
| NULL, |
| }; |
| |
| /* super speed support: */ |
| |
| static struct usb_endpoint_descriptor ss_subset_in_desc = { |
| .bLength = USB_DT_ENDPOINT_SIZE, |
| .bDescriptorType = USB_DT_ENDPOINT, |
| |
| .bmAttributes = USB_ENDPOINT_XFER_BULK, |
| .wMaxPacketSize = cpu_to_le16(1024), |
| }; |
| |
| static struct usb_endpoint_descriptor ss_subset_out_desc = { |
| .bLength = USB_DT_ENDPOINT_SIZE, |
| .bDescriptorType = USB_DT_ENDPOINT, |
| |
| .bmAttributes = USB_ENDPOINT_XFER_BULK, |
| .wMaxPacketSize = cpu_to_le16(1024), |
| }; |
| |
| static struct usb_ss_ep_comp_descriptor ss_subset_bulk_comp_desc = { |
| .bLength = sizeof ss_subset_bulk_comp_desc, |
| .bDescriptorType = USB_DT_SS_ENDPOINT_COMP, |
| |
| /* the following 2 values can be tweaked if necessary */ |
| /* .bMaxBurst = 0, */ |
| /* .bmAttributes = 0, */ |
| }; |
| |
| static struct usb_descriptor_header *ss_eth_function[] = { |
| (struct usb_descriptor_header *) &subset_data_intf, |
| (struct usb_descriptor_header *) &mdlm_header_desc, |
| (struct usb_descriptor_header *) &mdlm_desc, |
| (struct usb_descriptor_header *) &mdlm_detail_desc, |
| (struct usb_descriptor_header *) ðer_desc, |
| (struct usb_descriptor_header *) &ss_subset_in_desc, |
| (struct usb_descriptor_header *) &ss_subset_bulk_comp_desc, |
| (struct usb_descriptor_header *) &ss_subset_out_desc, |
| (struct usb_descriptor_header *) &ss_subset_bulk_comp_desc, |
| NULL, |
| }; |
| |
| /* string descriptors: */ |
| |
| static struct usb_string geth_string_defs[] = { |
| [0].s = "CDC Ethernet Subset/SAFE", |
| [1].s = "", |
| { } /* end of list */ |
| }; |
| |
| static struct usb_gadget_strings geth_string_table = { |
| .language = 0x0409, /* en-us */ |
| .strings = geth_string_defs, |
| }; |
| |
| static struct usb_gadget_strings *geth_strings[] = { |
| &geth_string_table, |
| NULL, |
| }; |
| |
| /*-------------------------------------------------------------------------*/ |
| |
| static int geth_set_alt(struct usb_function *f, unsigned intf, unsigned alt) |
| { |
| struct f_gether *geth = func_to_geth(f); |
| struct usb_composite_dev *cdev = f->config->cdev; |
| struct net_device *net; |
| |
| /* we know alt == 0, so this is an activation or a reset */ |
| |
| if (geth->port.in_ep->driver_data) { |
| DBG(cdev, "reset cdc subset\n"); |
| gether_disconnect(&geth->port); |
| } |
| |
| DBG(cdev, "init + activate cdc subset\n"); |
| if (config_ep_by_speed(cdev->gadget, f, geth->port.in_ep) || |
| config_ep_by_speed(cdev->gadget, f, geth->port.out_ep)) { |
| geth->port.in_ep->desc = NULL; |
| geth->port.out_ep->desc = NULL; |
| return -EINVAL; |
| } |
| |
| net = gether_connect(&geth->port); |
| return IS_ERR(net) ? PTR_ERR(net) : 0; |
| } |
| |
| static void geth_disable(struct usb_function *f) |
| { |
| struct f_gether *geth = func_to_geth(f); |
| struct usb_composite_dev *cdev = f->config->cdev; |
| |
| DBG(cdev, "net deactivated\n"); |
| gether_disconnect(&geth->port); |
| } |
| |
| /*-------------------------------------------------------------------------*/ |
| |
| /* serial function driver setup/binding */ |
| |
| static int |
| geth_bind(struct usb_configuration *c, struct usb_function *f) |
| { |
| struct usb_composite_dev *cdev = c->cdev; |
| struct f_gether *geth = func_to_geth(f); |
| struct usb_string *us; |
| int status; |
| struct usb_ep *ep; |
| |
| #ifndef USB_FSUBSET_INCLUDED |
| struct f_gether_opts *gether_opts; |
| |
| gether_opts = container_of(f->fi, struct f_gether_opts, func_inst); |
| |
| /* |
| * in drivers/usb/gadget/configfs.c:configfs_composite_bind() |
| * configurations are bound in sequence with list_for_each_entry, |
| * in each configuration its functions are bound in sequence |
| * with list_for_each_entry, so we assume no race condition |
| * with regard to gether_opts->bound access |
| */ |
| if (!gether_opts->bound) { |
| mutex_lock(&gether_opts->lock); |
| gether_set_gadget(gether_opts->net, cdev->gadget); |
| status = gether_register_netdev(gether_opts->net); |
| mutex_unlock(&gether_opts->lock); |
| if (status) |
| return status; |
| gether_opts->bound = true; |
| } |
| #endif |
| us = usb_gstrings_attach(cdev, geth_strings, |
| ARRAY_SIZE(geth_string_defs)); |
| if (IS_ERR(us)) |
| return PTR_ERR(us); |
| |
| subset_data_intf.iInterface = us[0].id; |
| ether_desc.iMACAddress = us[1].id; |
| |
| /* allocate instance-specific interface IDs */ |
| status = usb_interface_id(c, f); |
| if (status < 0) |
| goto fail; |
| subset_data_intf.bInterfaceNumber = status; |
| |
| status = -ENODEV; |
| |
| /* allocate instance-specific endpoints */ |
| ep = usb_ep_autoconfig(cdev->gadget, &fs_subset_in_desc); |
| if (!ep) |
| goto fail; |
| geth->port.in_ep = ep; |
| ep->driver_data = cdev; /* claim */ |
| |
| ep = usb_ep_autoconfig(cdev->gadget, &fs_subset_out_desc); |
| if (!ep) |
| goto fail; |
| geth->port.out_ep = ep; |
| ep->driver_data = cdev; /* claim */ |
| |
| /* support all relevant hardware speeds... we expect that when |
| * hardware is dual speed, all bulk-capable endpoints work at |
| * both speeds |
| */ |
| hs_subset_in_desc.bEndpointAddress = fs_subset_in_desc.bEndpointAddress; |
| hs_subset_out_desc.bEndpointAddress = |
| fs_subset_out_desc.bEndpointAddress; |
| |
| ss_subset_in_desc.bEndpointAddress = fs_subset_in_desc.bEndpointAddress; |
| ss_subset_out_desc.bEndpointAddress = |
| fs_subset_out_desc.bEndpointAddress; |
| |
| status = usb_assign_descriptors(f, fs_eth_function, hs_eth_function, |
| ss_eth_function); |
| if (status) |
| goto fail; |
| |
| /* NOTE: all that is done without knowing or caring about |
| * the network link ... which is unavailable to this code |
| * until we're activated via set_alt(). |
| */ |
| |
| DBG(cdev, "CDC Subset: %s speed IN/%s OUT/%s\n", |
| gadget_is_superspeed(c->cdev->gadget) ? "super" : |
| gadget_is_dualspeed(c->cdev->gadget) ? "dual" : "full", |
| geth->port.in_ep->name, geth->port.out_ep->name); |
| return 0; |
| |
| fail: |
| usb_free_all_descriptors(f); |
| /* we might as well release our claims on endpoints */ |
| if (geth->port.out_ep) |
| geth->port.out_ep->driver_data = NULL; |
| if (geth->port.in_ep) |
| geth->port.in_ep->driver_data = NULL; |
| |
| ERROR(cdev, "%s: can't bind, err %d\n", f->name, status); |
| |
| return status; |
| } |
| |
| #ifdef USB_FSUBSET_INCLUDED |
| |
| static void |
| geth_old_unbind(struct usb_configuration *c, struct usb_function *f) |
| { |
| geth_string_defs[0].id = 0; |
| usb_free_all_descriptors(f); |
| kfree(func_to_geth(f)); |
| } |
| |
| /** |
| * geth_bind_config - add CDC Subset network link to a configuration |
| * @c: the configuration to support the network link |
| * @ethaddr: a buffer in which the ethernet address of the host side |
| * side of the link was recorded |
| * @dev: eth_dev structure |
| * Context: single threaded during gadget setup |
| * |
| * Returns zero on success, else negative errno. |
| * |
| * Caller must have called @gether_setup(). Caller is also responsible |
| * for calling @gether_cleanup() before module unload. |
| */ |
| int geth_bind_config(struct usb_configuration *c, u8 ethaddr[ETH_ALEN], |
| struct eth_dev *dev) |
| { |
| struct f_gether *geth; |
| int status; |
| |
| /* allocate and initialize one new instance */ |
| geth = kzalloc(sizeof *geth, GFP_KERNEL); |
| if (!geth) |
| return -ENOMEM; |
| |
| /* export host's Ethernet address in CDC format */ |
| snprintf(geth->ethaddr, sizeof geth->ethaddr, "%pm", ethaddr); |
| geth_string_defs[1].s = geth->ethaddr; |
| |
| geth->port.ioport = dev; |
| geth->port.cdc_filter = DEFAULT_FILTER; |
| |
| geth->port.func.name = "cdc_subset"; |
| geth->port.func.bind = geth_bind; |
| geth->port.func.unbind = geth_old_unbind; |
| geth->port.func.set_alt = geth_set_alt; |
| geth->port.func.disable = geth_disable; |
| |
| status = usb_add_function(c, &geth->port.func); |
| if (status) |
| kfree(geth); |
| return status; |
| } |
| |
| #else |
| |
| static inline struct f_gether_opts *to_f_gether_opts(struct config_item *item) |
| { |
| return container_of(to_config_group(item), struct f_gether_opts, |
| func_inst.group); |
| } |
| |
| /* f_gether_item_ops */ |
| USB_ETHERNET_CONFIGFS_ITEM(gether); |
| |
| /* f_gether_opts_dev_addr */ |
| USB_ETHERNET_CONFIGFS_ITEM_ATTR_DEV_ADDR(gether); |
| |
| /* f_gether_opts_host_addr */ |
| USB_ETHERNET_CONFIGFS_ITEM_ATTR_HOST_ADDR(gether); |
| |
| /* f_gether_opts_qmult */ |
| USB_ETHERNET_CONFIGFS_ITEM_ATTR_QMULT(gether); |
| |
| /* f_gether_opts_ifname */ |
| USB_ETHERNET_CONFIGFS_ITEM_ATTR_IFNAME(gether); |
| |
| static struct configfs_attribute *gether_attrs[] = { |
| &f_gether_opts_dev_addr.attr, |
| &f_gether_opts_host_addr.attr, |
| &f_gether_opts_qmult.attr, |
| &f_gether_opts_ifname.attr, |
| NULL, |
| }; |
| |
| static struct config_item_type gether_func_type = { |
| .ct_item_ops = &gether_item_ops, |
| .ct_attrs = gether_attrs, |
| .ct_owner = THIS_MODULE, |
| }; |
| |
| static void geth_free_inst(struct usb_function_instance *f) |
| { |
| struct f_gether_opts *opts; |
| |
| opts = container_of(f, struct f_gether_opts, func_inst); |
| if (opts->bound) |
| gether_cleanup(netdev_priv(opts->net)); |
| else |
| free_netdev(opts->net); |
| kfree(opts); |
| } |
| |
| static struct usb_function_instance *geth_alloc_inst(void) |
| { |
| struct f_gether_opts *opts; |
| |
| opts = kzalloc(sizeof(*opts), GFP_KERNEL); |
| if (!opts) |
| return ERR_PTR(-ENOMEM); |
| mutex_init(&opts->lock); |
| opts->func_inst.free_func_inst = geth_free_inst; |
| opts->net = gether_setup_default(); |
| if (IS_ERR(opts->net)) |
| return ERR_CAST(opts->net); |
| |
| config_group_init_type_name(&opts->func_inst.group, "", |
| &gether_func_type); |
| |
| return &opts->func_inst; |
| } |
| |
| static void geth_free(struct usb_function *f) |
| { |
| struct f_gether *eth; |
| |
| eth = func_to_geth(f); |
| kfree(eth); |
| } |
| |
| static void geth_unbind(struct usb_configuration *c, struct usb_function *f) |
| { |
| geth_string_defs[0].id = 0; |
| usb_free_all_descriptors(f); |
| } |
| |
| static struct usb_function *geth_alloc(struct usb_function_instance *fi) |
| { |
| struct f_gether *geth; |
| struct f_gether_opts *opts; |
| int status; |
| |
| /* allocate and initialize one new instance */ |
| geth = kzalloc(sizeof(*geth), GFP_KERNEL); |
| if (!geth) |
| return ERR_PTR(-ENOMEM); |
| |
| opts = container_of(fi, struct f_gether_opts, func_inst); |
| |
| mutex_lock(&opts->lock); |
| opts->refcnt++; |
| /* export host's Ethernet address in CDC format */ |
| status = gether_get_host_addr_cdc(opts->net, geth->ethaddr, |
| sizeof(geth->ethaddr)); |
| if (status < 12) { |
| kfree(geth); |
| mutex_unlock(&opts->lock); |
| return ERR_PTR(-EINVAL); |
| } |
| geth_string_defs[1].s = geth->ethaddr; |
| |
| geth->port.ioport = netdev_priv(opts->net); |
| mutex_unlock(&opts->lock); |
| geth->port.cdc_filter = DEFAULT_FILTER; |
| |
| geth->port.func.name = "cdc_subset"; |
| geth->port.func.bind = geth_bind; |
| geth->port.func.unbind = geth_unbind; |
| geth->port.func.set_alt = geth_set_alt; |
| geth->port.func.disable = geth_disable; |
| geth->port.func.free_func = geth_free; |
| |
| return &geth->port.func; |
| } |
| |
| DECLARE_USB_FUNCTION_INIT(geth, geth_alloc_inst, geth_alloc); |
| MODULE_LICENSE("GPL"); |
| MODULE_AUTHOR("David Brownell"); |
| |
| #endif |