[ARM] pxa: add pxa3xx NAND support for littleton
Signed-off-by: Eric Miao <eric.miao@marvell.com>
Cc: Sergey Podstavin <spodstavin@ru.mvista.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
diff --git a/arch/arm/mach-pxa/littleton.c b/arch/arm/mach-pxa/littleton.c
index ff81a84..9a4f51d 100644
--- a/arch/arm/mach-pxa/littleton.c
+++ b/arch/arm/mach-pxa/littleton.c
@@ -38,6 +38,7 @@
#include <asm/arch/pxafb.h>
#include <asm/arch/ssp.h>
#include <asm/arch/pxa27x_keypad.h>
+#include <asm/arch/pxa3xx_nand.h>
#include <asm/arch/littleton.h>
#include "generic.h"
@@ -361,6 +362,57 @@
static inline void littleton_init_keypad(void) {}
#endif
+#if defined(CONFIG_MTD_NAND_PXA3xx) || defined(CONFIG_MTD_NAND_PXA3xx_MODULE)
+static struct mtd_partition littleton_nand_partitions[] = {
+ [0] = {
+ .name = "Bootloader",
+ .offset = 0,
+ .size = 0x060000,
+ .mask_flags = MTD_WRITEABLE, /* force read-only */
+ },
+ [1] = {
+ .name = "Kernel",
+ .offset = 0x060000,
+ .size = 0x200000,
+ .mask_flags = MTD_WRITEABLE, /* force read-only */
+ },
+ [2] = {
+ .name = "Filesystem",
+ .offset = 0x0260000,
+ .size = 0x3000000, /* 48M - rootfs */
+ },
+ [3] = {
+ .name = "MassStorage",
+ .offset = 0x3260000,
+ .size = 0x3d40000,
+ },
+ [4] = {
+ .name = "BBT",
+ .offset = 0x6FA0000,
+ .size = 0x80000,
+ .mask_flags = MTD_WRITEABLE, /* force read-only */
+ },
+ /* NOTE: we reserve some blocks at the end of the NAND flash for
+ * bad block management, and the max number of relocation blocks
+ * differs on different platforms. Please take care with it when
+ * defining the partition table.
+ */
+};
+
+static struct pxa3xx_nand_platform_data littleton_nand_info = {
+ .enable_arbiter = 1,
+ .parts = littleton_nand_partitions,
+ .nr_parts = ARRAY_SIZE(littleton_nand_partitions),
+};
+
+static void __init littleton_init_nand(void)
+{
+ pxa3xx_set_nand_info(&littleton_nand_info);
+}
+#else
+static inline void littleton_init_nand(void) {}
+#endif /* CONFIG_MTD_NAND_PXA3xx || CONFIG_MTD_NAND_PXA3xx_MODULE */
+
static void __init littleton_init(void)
{
/* initialize MFP configurations */
@@ -374,6 +426,7 @@
littleton_init_lcd();
littleton_init_keypad();
+ littleton_init_nand();
}
MACHINE_START(LITTLETON, "Marvell Form Factor Development Platform (aka Littleton)")