jffs2: Convert most D1/D2 macros to jffs2_dbg
D1 and D2 macros are mostly uses to emit debugging messages.
Convert the logging uses of D1 & D2 to jffs2_dbg(level, fmt, ...)
to be a bit more consistent style with the rest of the kernel.
All jffs2_dbg output is now at KERN_DEBUG where some of
the previous uses were emitted at various KERN_<LEVEL>s.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
diff --git a/fs/jffs2/fs.c b/fs/jffs2/fs.c
index 2e01238..9a8c97c 100644
--- a/fs/jffs2/fs.c
+++ b/fs/jffs2/fs.c
@@ -39,7 +39,7 @@
int ret;
int alloc_type = ALLOC_NORMAL;
- D1(printk(KERN_DEBUG "jffs2_setattr(): ino #%lu\n", inode->i_ino));
+ jffs2_dbg(1, "%s(): ino #%lu\n", __func__, inode->i_ino);
/* Special cases - we don't want more than one data node
for these types on the medium at any time. So setattr
@@ -50,7 +50,8 @@
/* For these, we don't actually need to read the old node */
mdatalen = jffs2_encode_dev(&dev, inode->i_rdev);
mdata = (char *)&dev;
- D1(printk(KERN_DEBUG "jffs2_setattr(): Writing %d bytes of kdev_t\n", mdatalen));
+ jffs2_dbg(1, "%s(): Writing %d bytes of kdev_t\n",
+ __func__, mdatalen);
} else if (S_ISLNK(inode->i_mode)) {
mutex_lock(&f->sem);
mdatalen = f->metadata->size;
@@ -66,7 +67,8 @@
return ret;
}
mutex_unlock(&f->sem);
- D1(printk(KERN_DEBUG "jffs2_setattr(): Writing %d bytes of symlink target\n", mdatalen));
+ jffs2_dbg(1, "%s(): Writing %d bytes of symlink target\n",
+ __func__, mdatalen);
}
ri = jffs2_alloc_raw_inode();
@@ -233,7 +235,8 @@
struct jffs2_sb_info *c = JFFS2_SB_INFO(inode->i_sb);
struct jffs2_inode_info *f = JFFS2_INODE_INFO(inode);
- D1(printk(KERN_DEBUG "jffs2_evict_inode(): ino #%lu mode %o\n", inode->i_ino, inode->i_mode));
+ jffs2_dbg(1, "%s(): ino #%lu mode %o\n",
+ __func__, inode->i_ino, inode->i_mode);
truncate_inode_pages(&inode->i_data, 0);
end_writeback(inode);
jffs2_do_clear_inode(c, f);
@@ -249,7 +252,7 @@
dev_t rdev = 0;
int ret;
- D1(printk(KERN_DEBUG "jffs2_iget(): ino == %lu\n", ino));
+ jffs2_dbg(1, "%s(): ino == %lu\n", __func__, ino);
inode = iget_locked(sb, ino);
if (!inode)
@@ -320,7 +323,7 @@
printk(KERN_NOTICE "Device node has strange size %d\n", f->metadata->size);
goto error_io;
}
- D1(printk(KERN_DEBUG "Reading device numbers from flash\n"));
+ jffs2_dbg(1, "Reading device numbers from flash\n");
ret = jffs2_read_dnode(c, f, f->metadata, (char *)&jdev, 0, f->metadata->size);
if (ret < 0) {
/* Eep */
@@ -344,7 +347,7 @@
mutex_unlock(&f->sem);
- D1(printk(KERN_DEBUG "jffs2_read_inode() returning\n"));
+ jffs2_dbg(1, "jffs2_read_inode() returning\n");
unlock_new_inode(inode);
return inode;
@@ -362,11 +365,13 @@
struct iattr iattr;
if (!(inode->i_state & I_DIRTY_DATASYNC)) {
- D2(printk(KERN_DEBUG "jffs2_dirty_inode() not calling setattr() for ino #%lu\n", inode->i_ino));
+ jffs2_dbg(2, "%s(): not calling setattr() for ino #%lu\n",
+ __func__, inode->i_ino);
return;
}
- D1(printk(KERN_DEBUG "jffs2_dirty_inode() calling setattr() for ino #%lu\n", inode->i_ino));
+ jffs2_dbg(1, "%s(): calling setattr() for ino #%lu\n",
+ __func__, inode->i_ino);
iattr.ia_valid = ATTR_MODE|ATTR_UID|ATTR_GID|ATTR_ATIME|ATTR_MTIME|ATTR_CTIME;
iattr.ia_mode = inode->i_mode;
@@ -414,7 +419,8 @@
struct jffs2_inode_info *f;
int ret;
- D1(printk(KERN_DEBUG "jffs2_new_inode(): dir_i %ld, mode 0x%x\n", dir_i->i_ino, mode));
+ jffs2_dbg(1, "%s(): dir_i %ld, mode 0x%x\n",
+ __func__, dir_i->i_ino, mode);
c = JFFS2_SB_INFO(sb);
@@ -550,17 +556,17 @@
if ((ret = jffs2_do_mount_fs(c)))
goto out_inohash;
- D1(printk(KERN_DEBUG "jffs2_do_fill_super(): Getting root inode\n"));
+ jffs2_dbg(1, "%s(): Getting root inode\n", __func__);
root_i = jffs2_iget(sb, 1);
if (IS_ERR(root_i)) {
- D1(printk(KERN_WARNING "get root inode failed\n"));
+ jffs2_dbg(1, "get root inode failed\n");
ret = PTR_ERR(root_i);
goto out_root;
}
ret = -ENOMEM;
- D1(printk(KERN_DEBUG "jffs2_do_fill_super(): d_alloc_root()\n"));
+ jffs2_dbg(1, "%s(): d_alloc_root()\n", __func__);
sb->s_root = d_alloc_root(root_i);
if (!sb->s_root)
goto out_root_i;
@@ -620,20 +626,21 @@
*/
inode = ilookup(OFNI_BS_2SFFJ(c), inum);
if (!inode) {
- D1(printk(KERN_DEBUG "ilookup() failed for ino #%u; inode is probably deleted.\n",
- inum));
+ jffs2_dbg(1, "ilookup() failed for ino #%u; inode is probably deleted.\n",
+ inum);
spin_lock(&c->inocache_lock);
ic = jffs2_get_ino_cache(c, inum);
if (!ic) {
- D1(printk(KERN_DEBUG "Inode cache for ino #%u is gone.\n", inum));
+ jffs2_dbg(1, "Inode cache for ino #%u is gone\n",
+ inum);
spin_unlock(&c->inocache_lock);
return NULL;
}
if (ic->state != INO_STATE_CHECKEDABSENT) {
/* Wait for progress. Don't just loop */
- D1(printk(KERN_DEBUG "Waiting for ino #%u in state %d\n",
- ic->ino, ic->state));
+ jffs2_dbg(1, "Waiting for ino #%u in state %d\n",
+ ic->ino, ic->state);
sleep_on_spinunlock(&c->inocache_wq, &c->inocache_lock);
} else {
spin_unlock(&c->inocache_lock);