| /* |
| * sja1000.c - Philips SJA1000 network device driver |
| * |
| * Copyright (c) 2003 Matthias Brukner, Trajet Gmbh, Rebenring 33, |
| * 38106 Braunschweig, GERMANY |
| * |
| * Copyright (c) 2002-2007 Volkswagen Group Electronic Research |
| * All rights reserved. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions |
| * are met: |
| * 1. Redistributions of source code must retain the above copyright |
| * notice, this list of conditions and the following disclaimer. |
| * 2. Redistributions in binary form must reproduce the above copyright |
| * notice, this list of conditions and the following disclaimer in the |
| * documentation and/or other materials provided with the distribution. |
| * 3. Neither the name of Volkswagen nor the names of its contributors |
| * may be used to endorse or promote products derived from this software |
| * without specific prior written permission. |
| * |
| * Alternatively, provided that this notice is retained in full, this |
| * software may be distributed under the terms of the GNU General |
| * Public License ("GPL") version 2, in which case the provisions of the |
| * GPL apply INSTEAD OF those given above. |
| * |
| * The provided data structures and external interfaces from this code |
| * are not restricted to be used by modules with a GPL compatible license. |
| * |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS |
| * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT |
| * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR |
| * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT |
| * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, |
| * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT |
| * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, |
| * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY |
| * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT |
| * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE |
| * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH |
| * DAMAGE. |
| * |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/init.h> |
| #include <linux/kernel.h> |
| #include <linux/sched.h> |
| #include <linux/types.h> |
| #include <linux/fcntl.h> |
| #include <linux/interrupt.h> |
| #include <linux/ptrace.h> |
| #include <linux/string.h> |
| #include <linux/errno.h> |
| #include <linux/netdevice.h> |
| #include <linux/if_arp.h> |
| #include <linux/if_ether.h> |
| #include <linux/skbuff.h> |
| #include <linux/delay.h> |
| |
| #include <linux/can/dev.h> |
| #include <linux/can/error.h> |
| #include <linux/can/led.h> |
| |
| #include "sja1000.h" |
| |
| #define DRV_NAME "sja1000" |
| |
| MODULE_AUTHOR("Oliver Hartkopp <oliver.hartkopp@volkswagen.de>"); |
| MODULE_LICENSE("Dual BSD/GPL"); |
| MODULE_DESCRIPTION(DRV_NAME "CAN netdevice driver"); |
| |
| static const struct can_bittiming_const sja1000_bittiming_const = { |
| .name = DRV_NAME, |
| .tseg1_min = 1, |
| .tseg1_max = 16, |
| .tseg2_min = 1, |
| .tseg2_max = 8, |
| .sjw_max = 4, |
| .brp_min = 1, |
| .brp_max = 64, |
| .brp_inc = 1, |
| }; |
| |
| static void sja1000_write_cmdreg(struct sja1000_priv *priv, u8 val) |
| { |
| unsigned long flags; |
| |
| /* |
| * The command register needs some locking and time to settle |
| * the write_reg() operation - especially on SMP systems. |
| */ |
| spin_lock_irqsave(&priv->cmdreg_lock, flags); |
| priv->write_reg(priv, SJA1000_CMR, val); |
| priv->read_reg(priv, SJA1000_SR); |
| spin_unlock_irqrestore(&priv->cmdreg_lock, flags); |
| } |
| |
| static int sja1000_is_absent(struct sja1000_priv *priv) |
| { |
| return (priv->read_reg(priv, SJA1000_MOD) == 0xFF); |
| } |
| |
| static int sja1000_probe_chip(struct net_device *dev) |
| { |
| struct sja1000_priv *priv = netdev_priv(dev); |
| |
| if (priv->reg_base && sja1000_is_absent(priv)) { |
| netdev_err(dev, "probing failed\n"); |
| return 0; |
| } |
| return -1; |
| } |
| |
| static void set_reset_mode(struct net_device *dev) |
| { |
| struct sja1000_priv *priv = netdev_priv(dev); |
| unsigned char status = priv->read_reg(priv, SJA1000_MOD); |
| int i; |
| |
| /* disable interrupts */ |
| priv->write_reg(priv, SJA1000_IER, IRQ_OFF); |
| |
| for (i = 0; i < 100; i++) { |
| /* check reset bit */ |
| if (status & MOD_RM) { |
| priv->can.state = CAN_STATE_STOPPED; |
| return; |
| } |
| |
| /* reset chip */ |
| priv->write_reg(priv, SJA1000_MOD, MOD_RM); |
| udelay(10); |
| status = priv->read_reg(priv, SJA1000_MOD); |
| } |
| |
| netdev_err(dev, "setting SJA1000 into reset mode failed!\n"); |
| } |
| |
| static void set_normal_mode(struct net_device *dev) |
| { |
| struct sja1000_priv *priv = netdev_priv(dev); |
| unsigned char status = priv->read_reg(priv, SJA1000_MOD); |
| u8 mod_reg_val = 0x00; |
| int i; |
| |
| for (i = 0; i < 100; i++) { |
| /* check reset bit */ |
| if ((status & MOD_RM) == 0) { |
| priv->can.state = CAN_STATE_ERROR_ACTIVE; |
| /* enable interrupts */ |
| if (priv->can.ctrlmode & CAN_CTRLMODE_BERR_REPORTING) |
| priv->write_reg(priv, SJA1000_IER, IRQ_ALL); |
| else |
| priv->write_reg(priv, SJA1000_IER, |
| IRQ_ALL & ~IRQ_BEI); |
| return; |
| } |
| |
| /* set chip to normal mode */ |
| if (priv->can.ctrlmode & CAN_CTRLMODE_LISTENONLY) |
| mod_reg_val |= MOD_LOM; |
| if (priv->can.ctrlmode & CAN_CTRLMODE_PRESUME_ACK) |
| mod_reg_val |= MOD_STM; |
| priv->write_reg(priv, SJA1000_MOD, mod_reg_val); |
| |
| udelay(10); |
| |
| status = priv->read_reg(priv, SJA1000_MOD); |
| } |
| |
| netdev_err(dev, "setting SJA1000 into normal mode failed!\n"); |
| } |
| |
| /* |
| * initialize SJA1000 chip: |
| * - reset chip |
| * - set output mode |
| * - set baudrate |
| * - enable interrupts |
| * - start operating mode |
| */ |
| static void chipset_init(struct net_device *dev) |
| { |
| struct sja1000_priv *priv = netdev_priv(dev); |
| |
| /* set clock divider and output control register */ |
| priv->write_reg(priv, SJA1000_CDR, priv->cdr | CDR_PELICAN); |
| |
| /* set acceptance filter (accept all) */ |
| priv->write_reg(priv, SJA1000_ACCC0, 0x00); |
| priv->write_reg(priv, SJA1000_ACCC1, 0x00); |
| priv->write_reg(priv, SJA1000_ACCC2, 0x00); |
| priv->write_reg(priv, SJA1000_ACCC3, 0x00); |
| |
| priv->write_reg(priv, SJA1000_ACCM0, 0xFF); |
| priv->write_reg(priv, SJA1000_ACCM1, 0xFF); |
| priv->write_reg(priv, SJA1000_ACCM2, 0xFF); |
| priv->write_reg(priv, SJA1000_ACCM3, 0xFF); |
| |
| priv->write_reg(priv, SJA1000_OCR, priv->ocr | OCR_MODE_NORMAL); |
| } |
| |
| static void sja1000_start(struct net_device *dev) |
| { |
| struct sja1000_priv *priv = netdev_priv(dev); |
| |
| /* leave reset mode */ |
| if (priv->can.state != CAN_STATE_STOPPED) |
| set_reset_mode(dev); |
| |
| /* Initialize chip if uninitialized at this stage */ |
| if (!(priv->read_reg(priv, SJA1000_CDR) & CDR_PELICAN)) |
| chipset_init(dev); |
| |
| /* Clear error counters and error code capture */ |
| priv->write_reg(priv, SJA1000_TXERR, 0x0); |
| priv->write_reg(priv, SJA1000_RXERR, 0x0); |
| priv->read_reg(priv, SJA1000_ECC); |
| |
| /* leave reset mode */ |
| set_normal_mode(dev); |
| } |
| |
| static int sja1000_set_mode(struct net_device *dev, enum can_mode mode) |
| { |
| switch (mode) { |
| case CAN_MODE_START: |
| sja1000_start(dev); |
| if (netif_queue_stopped(dev)) |
| netif_wake_queue(dev); |
| break; |
| |
| default: |
| return -EOPNOTSUPP; |
| } |
| |
| return 0; |
| } |
| |
| static int sja1000_set_bittiming(struct net_device *dev) |
| { |
| struct sja1000_priv *priv = netdev_priv(dev); |
| struct can_bittiming *bt = &priv->can.bittiming; |
| u8 btr0, btr1; |
| |
| btr0 = ((bt->brp - 1) & 0x3f) | (((bt->sjw - 1) & 0x3) << 6); |
| btr1 = ((bt->prop_seg + bt->phase_seg1 - 1) & 0xf) | |
| (((bt->phase_seg2 - 1) & 0x7) << 4); |
| if (priv->can.ctrlmode & CAN_CTRLMODE_3_SAMPLES) |
| btr1 |= 0x80; |
| |
| netdev_info(dev, "setting BTR0=0x%02x BTR1=0x%02x\n", btr0, btr1); |
| |
| priv->write_reg(priv, SJA1000_BTR0, btr0); |
| priv->write_reg(priv, SJA1000_BTR1, btr1); |
| |
| return 0; |
| } |
| |
| static int sja1000_get_berr_counter(const struct net_device *dev, |
| struct can_berr_counter *bec) |
| { |
| struct sja1000_priv *priv = netdev_priv(dev); |
| |
| bec->txerr = priv->read_reg(priv, SJA1000_TXERR); |
| bec->rxerr = priv->read_reg(priv, SJA1000_RXERR); |
| |
| return 0; |
| } |
| |
| /* |
| * transmit a CAN message |
| * message layout in the sk_buff should be like this: |
| * xx xx xx xx ff ll 00 11 22 33 44 55 66 77 |
| * [ can-id ] [flags] [len] [can data (up to 8 bytes] |
| */ |
| static netdev_tx_t sja1000_start_xmit(struct sk_buff *skb, |
| struct net_device *dev) |
| { |
| struct sja1000_priv *priv = netdev_priv(dev); |
| struct can_frame *cf = (struct can_frame *)skb->data; |
| uint8_t fi; |
| uint8_t dlc; |
| canid_t id; |
| uint8_t dreg; |
| u8 cmd_reg_val = 0x00; |
| int i; |
| |
| if (can_dropped_invalid_skb(dev, skb)) |
| return NETDEV_TX_OK; |
| |
| netif_stop_queue(dev); |
| |
| fi = dlc = cf->can_dlc; |
| id = cf->can_id; |
| |
| if (id & CAN_RTR_FLAG) |
| fi |= SJA1000_FI_RTR; |
| |
| if (id & CAN_EFF_FLAG) { |
| fi |= SJA1000_FI_FF; |
| dreg = SJA1000_EFF_BUF; |
| priv->write_reg(priv, SJA1000_FI, fi); |
| priv->write_reg(priv, SJA1000_ID1, (id & 0x1fe00000) >> 21); |
| priv->write_reg(priv, SJA1000_ID2, (id & 0x001fe000) >> 13); |
| priv->write_reg(priv, SJA1000_ID3, (id & 0x00001fe0) >> 5); |
| priv->write_reg(priv, SJA1000_ID4, (id & 0x0000001f) << 3); |
| } else { |
| dreg = SJA1000_SFF_BUF; |
| priv->write_reg(priv, SJA1000_FI, fi); |
| priv->write_reg(priv, SJA1000_ID1, (id & 0x000007f8) >> 3); |
| priv->write_reg(priv, SJA1000_ID2, (id & 0x00000007) << 5); |
| } |
| |
| for (i = 0; i < dlc; i++) |
| priv->write_reg(priv, dreg++, cf->data[i]); |
| |
| can_put_echo_skb(skb, dev, 0); |
| |
| if (priv->can.ctrlmode & CAN_CTRLMODE_ONE_SHOT) |
| cmd_reg_val |= CMD_AT; |
| |
| if (priv->can.ctrlmode & CAN_CTRLMODE_LOOPBACK) |
| cmd_reg_val |= CMD_SRR; |
| else |
| cmd_reg_val |= CMD_TR; |
| |
| sja1000_write_cmdreg(priv, cmd_reg_val); |
| |
| return NETDEV_TX_OK; |
| } |
| |
| static void sja1000_rx(struct net_device *dev) |
| { |
| struct sja1000_priv *priv = netdev_priv(dev); |
| struct net_device_stats *stats = &dev->stats; |
| struct can_frame *cf; |
| struct sk_buff *skb; |
| uint8_t fi; |
| uint8_t dreg; |
| canid_t id; |
| int i; |
| |
| /* create zero'ed CAN frame buffer */ |
| skb = alloc_can_skb(dev, &cf); |
| if (skb == NULL) |
| return; |
| |
| fi = priv->read_reg(priv, SJA1000_FI); |
| |
| if (fi & SJA1000_FI_FF) { |
| /* extended frame format (EFF) */ |
| dreg = SJA1000_EFF_BUF; |
| id = (priv->read_reg(priv, SJA1000_ID1) << 21) |
| | (priv->read_reg(priv, SJA1000_ID2) << 13) |
| | (priv->read_reg(priv, SJA1000_ID3) << 5) |
| | (priv->read_reg(priv, SJA1000_ID4) >> 3); |
| id |= CAN_EFF_FLAG; |
| } else { |
| /* standard frame format (SFF) */ |
| dreg = SJA1000_SFF_BUF; |
| id = (priv->read_reg(priv, SJA1000_ID1) << 3) |
| | (priv->read_reg(priv, SJA1000_ID2) >> 5); |
| } |
| |
| cf->can_dlc = get_can_dlc(fi & 0x0F); |
| if (fi & SJA1000_FI_RTR) { |
| id |= CAN_RTR_FLAG; |
| } else { |
| for (i = 0; i < cf->can_dlc; i++) |
| cf->data[i] = priv->read_reg(priv, dreg++); |
| } |
| |
| cf->can_id = id; |
| |
| /* release receive buffer */ |
| sja1000_write_cmdreg(priv, CMD_RRB); |
| |
| stats->rx_packets++; |
| stats->rx_bytes += cf->can_dlc; |
| netif_rx(skb); |
| |
| can_led_event(dev, CAN_LED_EVENT_RX); |
| } |
| |
| static int sja1000_err(struct net_device *dev, uint8_t isrc, uint8_t status) |
| { |
| struct sja1000_priv *priv = netdev_priv(dev); |
| struct net_device_stats *stats = &dev->stats; |
| struct can_frame *cf; |
| struct sk_buff *skb; |
| enum can_state state = priv->can.state; |
| enum can_state rx_state, tx_state; |
| unsigned int rxerr, txerr; |
| uint8_t ecc, alc; |
| |
| skb = alloc_can_err_skb(dev, &cf); |
| if (skb == NULL) |
| return -ENOMEM; |
| |
| txerr = priv->read_reg(priv, SJA1000_TXERR); |
| rxerr = priv->read_reg(priv, SJA1000_RXERR); |
| |
| cf->data[6] = txerr; |
| cf->data[7] = rxerr; |
| |
| if (isrc & IRQ_DOI) { |
| /* data overrun interrupt */ |
| netdev_dbg(dev, "data overrun interrupt\n"); |
| cf->can_id |= CAN_ERR_CRTL; |
| cf->data[1] = CAN_ERR_CRTL_RX_OVERFLOW; |
| stats->rx_over_errors++; |
| stats->rx_errors++; |
| sja1000_write_cmdreg(priv, CMD_CDO); /* clear bit */ |
| } |
| |
| if (isrc & IRQ_EI) { |
| /* error warning interrupt */ |
| netdev_dbg(dev, "error warning interrupt\n"); |
| |
| if (status & SR_BS) |
| state = CAN_STATE_BUS_OFF; |
| else if (status & SR_ES) |
| state = CAN_STATE_ERROR_WARNING; |
| else |
| state = CAN_STATE_ERROR_ACTIVE; |
| } |
| if (isrc & IRQ_BEI) { |
| /* bus error interrupt */ |
| priv->can.can_stats.bus_error++; |
| stats->rx_errors++; |
| |
| ecc = priv->read_reg(priv, SJA1000_ECC); |
| |
| cf->can_id |= CAN_ERR_PROT | CAN_ERR_BUSERROR; |
| |
| switch (ecc & ECC_MASK) { |
| case ECC_BIT: |
| cf->data[2] |= CAN_ERR_PROT_BIT; |
| break; |
| case ECC_FORM: |
| cf->data[2] |= CAN_ERR_PROT_FORM; |
| break; |
| case ECC_STUFF: |
| cf->data[2] |= CAN_ERR_PROT_STUFF; |
| break; |
| default: |
| cf->data[2] |= CAN_ERR_PROT_UNSPEC; |
| cf->data[3] = ecc & ECC_SEG; |
| break; |
| } |
| /* Error occurred during transmission? */ |
| if ((ecc & ECC_DIR) == 0) |
| cf->data[2] |= CAN_ERR_PROT_TX; |
| } |
| if (isrc & IRQ_EPI) { |
| /* error passive interrupt */ |
| netdev_dbg(dev, "error passive interrupt\n"); |
| |
| if (state == CAN_STATE_ERROR_PASSIVE) |
| state = CAN_STATE_ERROR_WARNING; |
| else |
| state = CAN_STATE_ERROR_PASSIVE; |
| } |
| if (isrc & IRQ_ALI) { |
| /* arbitration lost interrupt */ |
| netdev_dbg(dev, "arbitration lost interrupt\n"); |
| alc = priv->read_reg(priv, SJA1000_ALC); |
| priv->can.can_stats.arbitration_lost++; |
| stats->tx_errors++; |
| cf->can_id |= CAN_ERR_LOSTARB; |
| cf->data[0] = alc & 0x1f; |
| } |
| |
| if (state != priv->can.state) { |
| tx_state = txerr >= rxerr ? state : 0; |
| rx_state = txerr <= rxerr ? state : 0; |
| |
| can_change_state(dev, cf, tx_state, rx_state); |
| |
| if(state == CAN_STATE_BUS_OFF) |
| can_bus_off(dev); |
| } |
| |
| stats->rx_packets++; |
| stats->rx_bytes += cf->can_dlc; |
| netif_rx(skb); |
| |
| return 0; |
| } |
| |
| irqreturn_t sja1000_interrupt(int irq, void *dev_id) |
| { |
| struct net_device *dev = (struct net_device *)dev_id; |
| struct sja1000_priv *priv = netdev_priv(dev); |
| struct net_device_stats *stats = &dev->stats; |
| uint8_t isrc, status; |
| int n = 0; |
| |
| if (priv->pre_irq) |
| priv->pre_irq(priv); |
| |
| /* Shared interrupts and IRQ off? */ |
| if (priv->read_reg(priv, SJA1000_IER) == IRQ_OFF) |
| goto out; |
| |
| while ((isrc = priv->read_reg(priv, SJA1000_IR)) && |
| (n < SJA1000_MAX_IRQ)) { |
| |
| status = priv->read_reg(priv, SJA1000_SR); |
| /* check for absent controller due to hw unplug */ |
| if (status == 0xFF && sja1000_is_absent(priv)) |
| goto out; |
| |
| if (isrc & IRQ_WUI) |
| netdev_warn(dev, "wakeup interrupt\n"); |
| |
| if (isrc & IRQ_TI) { |
| /* transmission buffer released */ |
| if (priv->can.ctrlmode & CAN_CTRLMODE_ONE_SHOT && |
| !(status & SR_TCS)) { |
| stats->tx_errors++; |
| can_free_echo_skb(dev, 0); |
| } else { |
| /* transmission complete */ |
| stats->tx_bytes += |
| priv->read_reg(priv, SJA1000_FI) & 0xf; |
| stats->tx_packets++; |
| can_get_echo_skb(dev, 0); |
| } |
| netif_wake_queue(dev); |
| can_led_event(dev, CAN_LED_EVENT_TX); |
| } |
| if (isrc & IRQ_RI) { |
| /* receive interrupt */ |
| while (status & SR_RBS) { |
| sja1000_rx(dev); |
| status = priv->read_reg(priv, SJA1000_SR); |
| /* check for absent controller */ |
| if (status == 0xFF && sja1000_is_absent(priv)) |
| goto out; |
| } |
| } |
| if (isrc & (IRQ_DOI | IRQ_EI | IRQ_BEI | IRQ_EPI | IRQ_ALI)) { |
| /* error interrupt */ |
| if (sja1000_err(dev, isrc, status)) |
| break; |
| } |
| n++; |
| } |
| out: |
| if (priv->post_irq) |
| priv->post_irq(priv); |
| |
| if (n >= SJA1000_MAX_IRQ) |
| netdev_dbg(dev, "%d messages handled in ISR", n); |
| |
| return (n) ? IRQ_HANDLED : IRQ_NONE; |
| } |
| EXPORT_SYMBOL_GPL(sja1000_interrupt); |
| |
| static int sja1000_open(struct net_device *dev) |
| { |
| struct sja1000_priv *priv = netdev_priv(dev); |
| int err; |
| |
| /* set chip into reset mode */ |
| set_reset_mode(dev); |
| |
| /* common open */ |
| err = open_candev(dev); |
| if (err) |
| return err; |
| |
| /* register interrupt handler, if not done by the device driver */ |
| if (!(priv->flags & SJA1000_CUSTOM_IRQ_HANDLER)) { |
| err = request_irq(dev->irq, sja1000_interrupt, priv->irq_flags, |
| dev->name, (void *)dev); |
| if (err) { |
| close_candev(dev); |
| return -EAGAIN; |
| } |
| } |
| |
| /* init and start chi */ |
| sja1000_start(dev); |
| |
| can_led_event(dev, CAN_LED_EVENT_OPEN); |
| |
| netif_start_queue(dev); |
| |
| return 0; |
| } |
| |
| static int sja1000_close(struct net_device *dev) |
| { |
| struct sja1000_priv *priv = netdev_priv(dev); |
| |
| netif_stop_queue(dev); |
| set_reset_mode(dev); |
| |
| if (!(priv->flags & SJA1000_CUSTOM_IRQ_HANDLER)) |
| free_irq(dev->irq, (void *)dev); |
| |
| close_candev(dev); |
| |
| can_led_event(dev, CAN_LED_EVENT_STOP); |
| |
| return 0; |
| } |
| |
| struct net_device *alloc_sja1000dev(int sizeof_priv) |
| { |
| struct net_device *dev; |
| struct sja1000_priv *priv; |
| |
| dev = alloc_candev(sizeof(struct sja1000_priv) + sizeof_priv, |
| SJA1000_ECHO_SKB_MAX); |
| if (!dev) |
| return NULL; |
| |
| priv = netdev_priv(dev); |
| |
| priv->dev = dev; |
| priv->can.bittiming_const = &sja1000_bittiming_const; |
| priv->can.do_set_bittiming = sja1000_set_bittiming; |
| priv->can.do_set_mode = sja1000_set_mode; |
| priv->can.do_get_berr_counter = sja1000_get_berr_counter; |
| priv->can.ctrlmode_supported = CAN_CTRLMODE_LOOPBACK | |
| CAN_CTRLMODE_LISTENONLY | |
| CAN_CTRLMODE_3_SAMPLES | |
| CAN_CTRLMODE_ONE_SHOT | |
| CAN_CTRLMODE_BERR_REPORTING | |
| CAN_CTRLMODE_PRESUME_ACK; |
| |
| spin_lock_init(&priv->cmdreg_lock); |
| |
| if (sizeof_priv) |
| priv->priv = (void *)priv + sizeof(struct sja1000_priv); |
| |
| return dev; |
| } |
| EXPORT_SYMBOL_GPL(alloc_sja1000dev); |
| |
| void free_sja1000dev(struct net_device *dev) |
| { |
| free_candev(dev); |
| } |
| EXPORT_SYMBOL_GPL(free_sja1000dev); |
| |
| static const struct net_device_ops sja1000_netdev_ops = { |
| .ndo_open = sja1000_open, |
| .ndo_stop = sja1000_close, |
| .ndo_start_xmit = sja1000_start_xmit, |
| .ndo_change_mtu = can_change_mtu, |
| }; |
| |
| int register_sja1000dev(struct net_device *dev) |
| { |
| int ret; |
| |
| if (!sja1000_probe_chip(dev)) |
| return -ENODEV; |
| |
| dev->flags |= IFF_ECHO; /* we support local echo */ |
| dev->netdev_ops = &sja1000_netdev_ops; |
| |
| set_reset_mode(dev); |
| chipset_init(dev); |
| |
| ret = register_candev(dev); |
| |
| if (!ret) |
| devm_can_led_init(dev); |
| |
| return ret; |
| } |
| EXPORT_SYMBOL_GPL(register_sja1000dev); |
| |
| void unregister_sja1000dev(struct net_device *dev) |
| { |
| set_reset_mode(dev); |
| unregister_candev(dev); |
| } |
| EXPORT_SYMBOL_GPL(unregister_sja1000dev); |
| |
| static __init int sja1000_init(void) |
| { |
| printk(KERN_INFO "%s CAN netdevice driver\n", DRV_NAME); |
| |
| return 0; |
| } |
| |
| module_init(sja1000_init); |
| |
| static __exit void sja1000_exit(void) |
| { |
| printk(KERN_INFO "%s: driver removed\n", DRV_NAME); |
| } |
| |
| module_exit(sja1000_exit); |