[PATCH] ne: Support for RBHMA4500 eval board.
Support for Toshiba's RBHMA4500 eval board for the TX4938.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
drivers/net/ne.c | 15 +++++++++++++++
1 files changed, 15 insertions(+)
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
diff --git a/drivers/net/ne.c b/drivers/net/ne.c
index d209a15..0de8fdd 100644
--- a/drivers/net/ne.c
+++ b/drivers/net/ne.c
@@ -54,6 +54,10 @@
#include <asm/system.h>
#include <asm/io.h>
+#if defined(CONFIG_TOSHIBA_RBTX4927) || defined(CONFIG_TOSHIBA_RBTX4938)
+#include <asm/tx4938/rbtx4938.h>
+#endif
+
#include "8390.h"
#define DRV_NAME "ne"
@@ -111,6 +115,9 @@
{"E-LAN100", "E-LAN200", {0x00, 0x00, 0x5d}}, /* Broken ne1000 clones */
{"PCM-4823", "PCM-4823", {0x00, 0xc0, 0x6c}}, /* Broken Advantech MoBo */
{"REALTEK", "RTL8019", {0x00, 0x00, 0xe8}}, /* no-name with Realtek chip */
+#if defined(CONFIG_TOSHIBA_RBTX4927) || defined(CONFIG_TOSHIBA_RBTX4938)
+ {"RBHMA4X00-RTL8019", "RBHMA4X00/RTL8019", {0x00, 0x60, 0x0a}}, /* Toshiba built-in */
+#endif
{"LCS-8834", "LCS-8836", {0x04, 0x04, 0x37}}, /* ShinyNet (SET) */
{NULL,}
};
@@ -226,6 +233,10 @@
sprintf(dev->name, "eth%d", unit);
netdev_boot_setup_check(dev);
+#ifdef CONFIG_TOSHIBA_RBTX4938
+ dev->base_addr = 0x07f20280;
+ dev->irq = RBTX4938_RTL_8019_IRQ;
+#endif
err = do_ne_probe(dev);
if (err)
goto out;
@@ -506,6 +517,10 @@
ei_status.name = name;
ei_status.tx_start_page = start_page;
ei_status.stop_page = stop_page;
+#if defined(CONFIG_TOSHIBA_RBTX4927) || defined(CONFIG_TOSHIBA_RBTX4938)
+ wordlength = 1;
+#endif
+
#ifdef CONFIG_PLAT_OAKS32R
ei_status.word16 = 0;
#else