| /* |
| * AD7879/AD7889 based touchscreen and GPIO driver |
| * |
| * Copyright (C) 2008-2010 Michael Hennerich, Analog Devices Inc. |
| * |
| * Licensed under the GPL-2 or later. |
| * |
| * History: |
| * Copyright (c) 2005 David Brownell |
| * Copyright (c) 2006 Nokia Corporation |
| * Various changes: Imre Deak <imre.deak@nokia.com> |
| * |
| * Using code from: |
| * - corgi_ts.c |
| * Copyright (C) 2004-2005 Richard Purdie |
| * - omap_ts.[hc], ads7846.h, ts_osk.c |
| * Copyright (C) 2002 MontaVista Software |
| * Copyright (C) 2004 Texas Instruments |
| * Copyright (C) 2005 Dirk Behme |
| * - ad7877.c |
| * Copyright (C) 2006-2008 Analog Devices Inc. |
| */ |
| |
| #include <linux/device.h> |
| #include <linux/delay.h> |
| #include <linux/input.h> |
| #include <linux/interrupt.h> |
| #include <linux/irq.h> |
| #include <linux/slab.h> |
| #include <linux/spi/spi.h> |
| #include <linux/i2c.h> |
| #include <linux/gpio.h> |
| |
| #include <linux/spi/ad7879.h> |
| #include <linux/module.h> |
| #include "ad7879.h" |
| |
| #define AD7879_REG_ZEROS 0 |
| #define AD7879_REG_CTRL1 1 |
| #define AD7879_REG_CTRL2 2 |
| #define AD7879_REG_CTRL3 3 |
| #define AD7879_REG_AUX1HIGH 4 |
| #define AD7879_REG_AUX1LOW 5 |
| #define AD7879_REG_TEMP1HIGH 6 |
| #define AD7879_REG_TEMP1LOW 7 |
| #define AD7879_REG_XPLUS 8 |
| #define AD7879_REG_YPLUS 9 |
| #define AD7879_REG_Z1 10 |
| #define AD7879_REG_Z2 11 |
| #define AD7879_REG_AUXVBAT 12 |
| #define AD7879_REG_TEMP 13 |
| #define AD7879_REG_REVID 14 |
| |
| /* Control REG 1 */ |
| #define AD7879_TMR(x) ((x & 0xFF) << 0) |
| #define AD7879_ACQ(x) ((x & 0x3) << 8) |
| #define AD7879_MODE_NOC (0 << 10) /* Do not convert */ |
| #define AD7879_MODE_SCC (1 << 10) /* Single channel conversion */ |
| #define AD7879_MODE_SEQ0 (2 << 10) /* Sequence 0 in Slave Mode */ |
| #define AD7879_MODE_SEQ1 (3 << 10) /* Sequence 1 in Master Mode */ |
| #define AD7879_MODE_INT (1 << 15) /* PENIRQ disabled INT enabled */ |
| |
| /* Control REG 2 */ |
| #define AD7879_FCD(x) ((x & 0x3) << 0) |
| #define AD7879_RESET (1 << 4) |
| #define AD7879_MFS(x) ((x & 0x3) << 5) |
| #define AD7879_AVG(x) ((x & 0x3) << 7) |
| #define AD7879_SER (1 << 9) /* non-differential */ |
| #define AD7879_DFR (0 << 9) /* differential */ |
| #define AD7879_GPIOPOL (1 << 10) |
| #define AD7879_GPIODIR (1 << 11) |
| #define AD7879_GPIO_DATA (1 << 12) |
| #define AD7879_GPIO_EN (1 << 13) |
| #define AD7879_PM(x) ((x & 0x3) << 14) |
| #define AD7879_PM_SHUTDOWN (0) |
| #define AD7879_PM_DYN (1) |
| #define AD7879_PM_FULLON (2) |
| |
| /* Control REG 3 */ |
| #define AD7879_TEMPMASK_BIT (1<<15) |
| #define AD7879_AUXVBATMASK_BIT (1<<14) |
| #define AD7879_INTMODE_BIT (1<<13) |
| #define AD7879_GPIOALERTMASK_BIT (1<<12) |
| #define AD7879_AUXLOW_BIT (1<<11) |
| #define AD7879_AUXHIGH_BIT (1<<10) |
| #define AD7879_TEMPLOW_BIT (1<<9) |
| #define AD7879_TEMPHIGH_BIT (1<<8) |
| #define AD7879_YPLUS_BIT (1<<7) |
| #define AD7879_XPLUS_BIT (1<<6) |
| #define AD7879_Z1_BIT (1<<5) |
| #define AD7879_Z2_BIT (1<<4) |
| #define AD7879_AUX_BIT (1<<3) |
| #define AD7879_VBAT_BIT (1<<2) |
| #define AD7879_TEMP_BIT (1<<1) |
| |
| enum { |
| AD7879_SEQ_XPOS = 0, |
| AD7879_SEQ_YPOS = 1, |
| AD7879_SEQ_Z1 = 2, |
| AD7879_SEQ_Z2 = 3, |
| AD7879_NR_SENSE = 4, |
| }; |
| |
| #define MAX_12BIT ((1<<12)-1) |
| #define TS_PEN_UP_TIMEOUT msecs_to_jiffies(50) |
| |
| struct ad7879 { |
| const struct ad7879_bus_ops *bops; |
| |
| struct device *dev; |
| struct input_dev *input; |
| struct timer_list timer; |
| #ifdef CONFIG_GPIOLIB |
| struct gpio_chip gc; |
| struct mutex mutex; |
| #endif |
| unsigned int irq; |
| bool disabled; /* P: input->mutex */ |
| bool suspended; /* P: input->mutex */ |
| bool swap_xy; |
| u16 conversion_data[AD7879_NR_SENSE]; |
| char phys[32]; |
| u8 first_conversion_delay; |
| u8 acquisition_time; |
| u8 averaging; |
| u8 pen_down_acc_interval; |
| u8 median; |
| u16 x_plate_ohms; |
| u16 pressure_max; |
| u16 cmd_crtl1; |
| u16 cmd_crtl2; |
| u16 cmd_crtl3; |
| int x; |
| int y; |
| int Rt; |
| }; |
| |
| static int ad7879_read(struct ad7879 *ts, u8 reg) |
| { |
| return ts->bops->read(ts->dev, reg); |
| } |
| |
| static int ad7879_multi_read(struct ad7879 *ts, u8 first_reg, u8 count, u16 *buf) |
| { |
| return ts->bops->multi_read(ts->dev, first_reg, count, buf); |
| } |
| |
| static int ad7879_write(struct ad7879 *ts, u8 reg, u16 val) |
| { |
| return ts->bops->write(ts->dev, reg, val); |
| } |
| |
| static int ad7879_report(struct ad7879 *ts) |
| { |
| struct input_dev *input_dev = ts->input; |
| unsigned Rt; |
| u16 x, y, z1, z2; |
| |
| x = ts->conversion_data[AD7879_SEQ_XPOS] & MAX_12BIT; |
| y = ts->conversion_data[AD7879_SEQ_YPOS] & MAX_12BIT; |
| z1 = ts->conversion_data[AD7879_SEQ_Z1] & MAX_12BIT; |
| z2 = ts->conversion_data[AD7879_SEQ_Z2] & MAX_12BIT; |
| |
| if (ts->swap_xy) |
| swap(x, y); |
| |
| /* |
| * The samples processed here are already preprocessed by the AD7879. |
| * The preprocessing function consists of a median and an averaging |
| * filter. The combination of these two techniques provides a robust |
| * solution, discarding the spurious noise in the signal and keeping |
| * only the data of interest. The size of both filters is |
| * programmable. (dev.platform_data, see linux/spi/ad7879.h) Other |
| * user-programmable conversion controls include variable acquisition |
| * time, and first conversion delay. Up to 16 averages can be taken |
| * per conversion. |
| */ |
| |
| if (likely(x && z1)) { |
| /* compute touch pressure resistance using equation #1 */ |
| Rt = (z2 - z1) * x * ts->x_plate_ohms; |
| Rt /= z1; |
| Rt = (Rt + 2047) >> 12; |
| |
| /* |
| * Sample found inconsistent, pressure is beyond |
| * the maximum. Don't report it to user space. |
| */ |
| if (Rt > ts->pressure_max) |
| return -EINVAL; |
| |
| /* |
| * Note that we delay reporting events by one sample. |
| * This is done to avoid reporting last sample of the |
| * touch sequence, which may be incomplete if finger |
| * leaves the surface before last reading is taken. |
| */ |
| if (timer_pending(&ts->timer)) { |
| /* Touch continues */ |
| input_report_key(input_dev, BTN_TOUCH, 1); |
| input_report_abs(input_dev, ABS_X, ts->x); |
| input_report_abs(input_dev, ABS_Y, ts->y); |
| input_report_abs(input_dev, ABS_PRESSURE, ts->Rt); |
| input_sync(input_dev); |
| } |
| |
| ts->x = x; |
| ts->y = y; |
| ts->Rt = Rt; |
| |
| return 0; |
| } |
| |
| return -EINVAL; |
| } |
| |
| static void ad7879_ts_event_release(struct ad7879 *ts) |
| { |
| struct input_dev *input_dev = ts->input; |
| |
| input_report_abs(input_dev, ABS_PRESSURE, 0); |
| input_report_key(input_dev, BTN_TOUCH, 0); |
| input_sync(input_dev); |
| } |
| |
| static void ad7879_timer(unsigned long handle) |
| { |
| struct ad7879 *ts = (void *)handle; |
| |
| ad7879_ts_event_release(ts); |
| } |
| |
| static irqreturn_t ad7879_irq(int irq, void *handle) |
| { |
| struct ad7879 *ts = handle; |
| |
| ad7879_multi_read(ts, AD7879_REG_XPLUS, AD7879_NR_SENSE, ts->conversion_data); |
| |
| if (!ad7879_report(ts)) |
| mod_timer(&ts->timer, jiffies + TS_PEN_UP_TIMEOUT); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static void __ad7879_enable(struct ad7879 *ts) |
| { |
| ad7879_write(ts, AD7879_REG_CTRL2, ts->cmd_crtl2); |
| ad7879_write(ts, AD7879_REG_CTRL3, ts->cmd_crtl3); |
| ad7879_write(ts, AD7879_REG_CTRL1, ts->cmd_crtl1); |
| |
| enable_irq(ts->irq); |
| } |
| |
| static void __ad7879_disable(struct ad7879 *ts) |
| { |
| u16 reg = (ts->cmd_crtl2 & ~AD7879_PM(-1)) | |
| AD7879_PM(AD7879_PM_SHUTDOWN); |
| disable_irq(ts->irq); |
| |
| if (del_timer_sync(&ts->timer)) |
| ad7879_ts_event_release(ts); |
| |
| ad7879_write(ts, AD7879_REG_CTRL2, reg); |
| } |
| |
| |
| static int ad7879_open(struct input_dev *input) |
| { |
| struct ad7879 *ts = input_get_drvdata(input); |
| |
| /* protected by input->mutex */ |
| if (!ts->disabled && !ts->suspended) |
| __ad7879_enable(ts); |
| |
| return 0; |
| } |
| |
| static void ad7879_close(struct input_dev* input) |
| { |
| struct ad7879 *ts = input_get_drvdata(input); |
| |
| /* protected by input->mutex */ |
| if (!ts->disabled && !ts->suspended) |
| __ad7879_disable(ts); |
| } |
| |
| #ifdef CONFIG_PM_SLEEP |
| static int ad7879_suspend(struct device *dev) |
| { |
| struct ad7879 *ts = dev_get_drvdata(dev); |
| |
| mutex_lock(&ts->input->mutex); |
| |
| if (!ts->suspended && !ts->disabled && ts->input->users) |
| __ad7879_disable(ts); |
| |
| ts->suspended = true; |
| |
| mutex_unlock(&ts->input->mutex); |
| |
| return 0; |
| } |
| |
| static int ad7879_resume(struct device *dev) |
| { |
| struct ad7879 *ts = dev_get_drvdata(dev); |
| |
| mutex_lock(&ts->input->mutex); |
| |
| if (ts->suspended && !ts->disabled && ts->input->users) |
| __ad7879_enable(ts); |
| |
| ts->suspended = false; |
| |
| mutex_unlock(&ts->input->mutex); |
| |
| return 0; |
| } |
| #endif |
| |
| SIMPLE_DEV_PM_OPS(ad7879_pm_ops, ad7879_suspend, ad7879_resume); |
| EXPORT_SYMBOL(ad7879_pm_ops); |
| |
| static void ad7879_toggle(struct ad7879 *ts, bool disable) |
| { |
| mutex_lock(&ts->input->mutex); |
| |
| if (!ts->suspended && ts->input->users != 0) { |
| |
| if (disable) { |
| if (ts->disabled) |
| __ad7879_enable(ts); |
| } else { |
| if (!ts->disabled) |
| __ad7879_disable(ts); |
| } |
| } |
| |
| ts->disabled = disable; |
| |
| mutex_unlock(&ts->input->mutex); |
| } |
| |
| static ssize_t ad7879_disable_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| struct ad7879 *ts = dev_get_drvdata(dev); |
| |
| return sprintf(buf, "%u\n", ts->disabled); |
| } |
| |
| static ssize_t ad7879_disable_store(struct device *dev, |
| struct device_attribute *attr, |
| const char *buf, size_t count) |
| { |
| struct ad7879 *ts = dev_get_drvdata(dev); |
| unsigned int val; |
| int error; |
| |
| error = kstrtouint(buf, 10, &val); |
| if (error) |
| return error; |
| |
| ad7879_toggle(ts, val); |
| |
| return count; |
| } |
| |
| static DEVICE_ATTR(disable, 0664, ad7879_disable_show, ad7879_disable_store); |
| |
| static struct attribute *ad7879_attributes[] = { |
| &dev_attr_disable.attr, |
| NULL |
| }; |
| |
| static const struct attribute_group ad7879_attr_group = { |
| .attrs = ad7879_attributes, |
| }; |
| |
| #ifdef CONFIG_GPIOLIB |
| static int ad7879_gpio_direction_input(struct gpio_chip *chip, |
| unsigned gpio) |
| { |
| struct ad7879 *ts = container_of(chip, struct ad7879, gc); |
| int err; |
| |
| mutex_lock(&ts->mutex); |
| ts->cmd_crtl2 |= AD7879_GPIO_EN | AD7879_GPIODIR | AD7879_GPIOPOL; |
| err = ad7879_write(ts, AD7879_REG_CTRL2, ts->cmd_crtl2); |
| mutex_unlock(&ts->mutex); |
| |
| return err; |
| } |
| |
| static int ad7879_gpio_direction_output(struct gpio_chip *chip, |
| unsigned gpio, int level) |
| { |
| struct ad7879 *ts = container_of(chip, struct ad7879, gc); |
| int err; |
| |
| mutex_lock(&ts->mutex); |
| ts->cmd_crtl2 &= ~AD7879_GPIODIR; |
| ts->cmd_crtl2 |= AD7879_GPIO_EN | AD7879_GPIOPOL; |
| if (level) |
| ts->cmd_crtl2 |= AD7879_GPIO_DATA; |
| else |
| ts->cmd_crtl2 &= ~AD7879_GPIO_DATA; |
| |
| err = ad7879_write(ts, AD7879_REG_CTRL2, ts->cmd_crtl2); |
| mutex_unlock(&ts->mutex); |
| |
| return err; |
| } |
| |
| static int ad7879_gpio_get_value(struct gpio_chip *chip, unsigned gpio) |
| { |
| struct ad7879 *ts = container_of(chip, struct ad7879, gc); |
| u16 val; |
| |
| mutex_lock(&ts->mutex); |
| val = ad7879_read(ts, AD7879_REG_CTRL2); |
| mutex_unlock(&ts->mutex); |
| |
| return !!(val & AD7879_GPIO_DATA); |
| } |
| |
| static void ad7879_gpio_set_value(struct gpio_chip *chip, |
| unsigned gpio, int value) |
| { |
| struct ad7879 *ts = container_of(chip, struct ad7879, gc); |
| |
| mutex_lock(&ts->mutex); |
| if (value) |
| ts->cmd_crtl2 |= AD7879_GPIO_DATA; |
| else |
| ts->cmd_crtl2 &= ~AD7879_GPIO_DATA; |
| |
| ad7879_write(ts, AD7879_REG_CTRL2, ts->cmd_crtl2); |
| mutex_unlock(&ts->mutex); |
| } |
| |
| static int ad7879_gpio_add(struct ad7879 *ts, |
| const struct ad7879_platform_data *pdata) |
| { |
| int ret = 0; |
| |
| mutex_init(&ts->mutex); |
| |
| if (pdata->gpio_export) { |
| ts->gc.direction_input = ad7879_gpio_direction_input; |
| ts->gc.direction_output = ad7879_gpio_direction_output; |
| ts->gc.get = ad7879_gpio_get_value; |
| ts->gc.set = ad7879_gpio_set_value; |
| ts->gc.can_sleep = 1; |
| ts->gc.base = pdata->gpio_base; |
| ts->gc.ngpio = 1; |
| ts->gc.label = "AD7879-GPIO"; |
| ts->gc.owner = THIS_MODULE; |
| ts->gc.dev = ts->dev; |
| |
| ret = gpiochip_add(&ts->gc); |
| if (ret) |
| dev_err(ts->dev, "failed to register gpio %d\n", |
| ts->gc.base); |
| } |
| |
| return ret; |
| } |
| |
| static void ad7879_gpio_remove(struct ad7879 *ts) |
| { |
| const struct ad7879_platform_data *pdata = dev_get_platdata(ts->dev); |
| int ret; |
| |
| if (pdata->gpio_export) { |
| ret = gpiochip_remove(&ts->gc); |
| if (ret) |
| dev_err(ts->dev, "failed to remove gpio %d\n", |
| ts->gc.base); |
| } |
| } |
| #else |
| static inline int ad7879_gpio_add(struct ad7879 *ts, |
| const struct ad7879_platform_data *pdata) |
| { |
| return 0; |
| } |
| |
| static inline void ad7879_gpio_remove(struct ad7879 *ts) |
| { |
| } |
| #endif |
| |
| struct ad7879 *ad7879_probe(struct device *dev, u8 devid, unsigned int irq, |
| const struct ad7879_bus_ops *bops) |
| { |
| struct ad7879_platform_data *pdata = dev_get_platdata(dev); |
| struct ad7879 *ts; |
| struct input_dev *input_dev; |
| int err; |
| u16 revid; |
| |
| if (!irq) { |
| dev_err(dev, "no IRQ?\n"); |
| err = -EINVAL; |
| goto err_out; |
| } |
| |
| if (!pdata) { |
| dev_err(dev, "no platform data?\n"); |
| err = -EINVAL; |
| goto err_out; |
| } |
| |
| ts = kzalloc(sizeof(*ts), GFP_KERNEL); |
| input_dev = input_allocate_device(); |
| if (!ts || !input_dev) { |
| err = -ENOMEM; |
| goto err_free_mem; |
| } |
| |
| ts->bops = bops; |
| ts->dev = dev; |
| ts->input = input_dev; |
| ts->irq = irq; |
| ts->swap_xy = pdata->swap_xy; |
| |
| setup_timer(&ts->timer, ad7879_timer, (unsigned long) ts); |
| |
| ts->x_plate_ohms = pdata->x_plate_ohms ? : 400; |
| ts->pressure_max = pdata->pressure_max ? : ~0; |
| |
| ts->first_conversion_delay = pdata->first_conversion_delay; |
| ts->acquisition_time = pdata->acquisition_time; |
| ts->averaging = pdata->averaging; |
| ts->pen_down_acc_interval = pdata->pen_down_acc_interval; |
| ts->median = pdata->median; |
| |
| snprintf(ts->phys, sizeof(ts->phys), "%s/input0", dev_name(dev)); |
| |
| input_dev->name = "AD7879 Touchscreen"; |
| input_dev->phys = ts->phys; |
| input_dev->dev.parent = dev; |
| input_dev->id.bustype = bops->bustype; |
| |
| input_dev->open = ad7879_open; |
| input_dev->close = ad7879_close; |
| |
| input_set_drvdata(input_dev, ts); |
| |
| __set_bit(EV_ABS, input_dev->evbit); |
| __set_bit(ABS_X, input_dev->absbit); |
| __set_bit(ABS_Y, input_dev->absbit); |
| __set_bit(ABS_PRESSURE, input_dev->absbit); |
| |
| __set_bit(EV_KEY, input_dev->evbit); |
| __set_bit(BTN_TOUCH, input_dev->keybit); |
| |
| input_set_abs_params(input_dev, ABS_X, |
| pdata->x_min ? : 0, |
| pdata->x_max ? : MAX_12BIT, |
| 0, 0); |
| input_set_abs_params(input_dev, ABS_Y, |
| pdata->y_min ? : 0, |
| pdata->y_max ? : MAX_12BIT, |
| 0, 0); |
| input_set_abs_params(input_dev, ABS_PRESSURE, |
| pdata->pressure_min, pdata->pressure_max, 0, 0); |
| |
| err = ad7879_write(ts, AD7879_REG_CTRL2, AD7879_RESET); |
| if (err < 0) { |
| dev_err(dev, "Failed to write %s\n", input_dev->name); |
| goto err_free_mem; |
| } |
| |
| revid = ad7879_read(ts, AD7879_REG_REVID); |
| input_dev->id.product = (revid & 0xff); |
| input_dev->id.version = revid >> 8; |
| if (input_dev->id.product != devid) { |
| dev_err(dev, "Failed to probe %s (%x vs %x)\n", |
| input_dev->name, devid, revid); |
| err = -ENODEV; |
| goto err_free_mem; |
| } |
| |
| ts->cmd_crtl3 = AD7879_YPLUS_BIT | |
| AD7879_XPLUS_BIT | |
| AD7879_Z2_BIT | |
| AD7879_Z1_BIT | |
| AD7879_TEMPMASK_BIT | |
| AD7879_AUXVBATMASK_BIT | |
| AD7879_GPIOALERTMASK_BIT; |
| |
| ts->cmd_crtl2 = AD7879_PM(AD7879_PM_DYN) | AD7879_DFR | |
| AD7879_AVG(ts->averaging) | |
| AD7879_MFS(ts->median) | |
| AD7879_FCD(ts->first_conversion_delay); |
| |
| ts->cmd_crtl1 = AD7879_MODE_INT | AD7879_MODE_SEQ1 | |
| AD7879_ACQ(ts->acquisition_time) | |
| AD7879_TMR(ts->pen_down_acc_interval); |
| |
| err = request_threaded_irq(ts->irq, NULL, ad7879_irq, |
| IRQF_TRIGGER_FALLING | IRQF_ONESHOT, |
| dev_name(dev), ts); |
| if (err) { |
| dev_err(dev, "irq %d busy?\n", ts->irq); |
| goto err_free_mem; |
| } |
| |
| __ad7879_disable(ts); |
| |
| err = sysfs_create_group(&dev->kobj, &ad7879_attr_group); |
| if (err) |
| goto err_free_irq; |
| |
| err = ad7879_gpio_add(ts, pdata); |
| if (err) |
| goto err_remove_attr; |
| |
| err = input_register_device(input_dev); |
| if (err) |
| goto err_remove_gpio; |
| |
| return ts; |
| |
| err_remove_gpio: |
| ad7879_gpio_remove(ts); |
| err_remove_attr: |
| sysfs_remove_group(&dev->kobj, &ad7879_attr_group); |
| err_free_irq: |
| free_irq(ts->irq, ts); |
| err_free_mem: |
| input_free_device(input_dev); |
| kfree(ts); |
| err_out: |
| return ERR_PTR(err); |
| } |
| EXPORT_SYMBOL(ad7879_probe); |
| |
| void ad7879_remove(struct ad7879 *ts) |
| { |
| ad7879_gpio_remove(ts); |
| sysfs_remove_group(&ts->dev->kobj, &ad7879_attr_group); |
| free_irq(ts->irq, ts); |
| input_unregister_device(ts->input); |
| kfree(ts); |
| } |
| EXPORT_SYMBOL(ad7879_remove); |
| |
| MODULE_AUTHOR("Michael Hennerich <hennerich@blackfin.uclinux.org>"); |
| MODULE_DESCRIPTION("AD7879(-1) touchscreen Driver"); |
| MODULE_LICENSE("GPL"); |