[ARM] 4124/1: Rename mach-at91rm9200 and arch-at91rm9200 directories
Now that Linux includes support for the Atmel AT91SAM9260 and
AT91SAM9261 processors in addition to the original Atmel AT91RM9200
(with support for more AT91 processors pending), the "mach-at91rm9200"
and "arch-at91rm9200" directories should be renamed to indicate their
more generic nature.
The following git commands should be run BEFORE applying this patch:
git-mv arch/arm/mach-at91rm9200 arch/arm/mach-at91
git-mv include/asm-arm/arch-at91rm9200 include/asm-arm/arch-at91
Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
diff --git a/arch/arm/mach-at91/irq.c b/arch/arm/mach-at91/irq.c
new file mode 100644
index 0000000..78a5cdb
--- /dev/null
+++ b/arch/arm/mach-at91/irq.c
@@ -0,0 +1,168 @@
+/*
+ * linux/arch/arm/mach-at91/irq.c
+ *
+ * Copyright (C) 2004 SAN People
+ * Copyright (C) 2004 ATMEL
+ * Copyright (C) Rick Bronson
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/mm.h>
+#include <linux/types.h>
+
+#include <asm/hardware.h>
+#include <asm/irq.h>
+#include <asm/mach-types.h>
+#include <asm/setup.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/irq.h>
+#include <asm/mach/map.h>
+
+
+static void at91_aic_mask_irq(unsigned int irq)
+{
+ /* Disable interrupt on AIC */
+ at91_sys_write(AT91_AIC_IDCR, 1 << irq);
+}
+
+static void at91_aic_unmask_irq(unsigned int irq)
+{
+ /* Enable interrupt on AIC */
+ at91_sys_write(AT91_AIC_IECR, 1 << irq);
+}
+
+unsigned int at91_extern_irq;
+
+#define is_extern_irq(irq) ((1 << (irq)) & at91_extern_irq)
+
+static int at91_aic_set_type(unsigned irq, unsigned type)
+{
+ unsigned int smr, srctype;
+
+ switch (type) {
+ case IRQT_HIGH:
+ srctype = AT91_AIC_SRCTYPE_HIGH;
+ break;
+ case IRQT_RISING:
+ srctype = AT91_AIC_SRCTYPE_RISING;
+ break;
+ case IRQT_LOW:
+ if ((irq == AT91_ID_FIQ) || is_extern_irq(irq)) /* only supported on external interrupts */
+ srctype = AT91_AIC_SRCTYPE_LOW;
+ else
+ return -EINVAL;
+ break;
+ case IRQT_FALLING:
+ if ((irq == AT91_ID_FIQ) || is_extern_irq(irq)) /* only supported on external interrupts */
+ srctype = AT91_AIC_SRCTYPE_FALLING;
+ else
+ return -EINVAL;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ smr = at91_sys_read(AT91_AIC_SMR(irq)) & ~AT91_AIC_SRCTYPE;
+ at91_sys_write(AT91_AIC_SMR(irq), smr | srctype);
+ return 0;
+}
+
+#ifdef CONFIG_PM
+
+static u32 wakeups;
+static u32 backups;
+
+static int at91_aic_set_wake(unsigned irq, unsigned value)
+{
+ if (unlikely(irq >= 32))
+ return -EINVAL;
+
+ if (value)
+ wakeups |= (1 << irq);
+ else
+ wakeups &= ~(1 << irq);
+
+ return 0;
+}
+
+void at91_irq_suspend(void)
+{
+ backups = at91_sys_read(AT91_AIC_IMR);
+ at91_sys_write(AT91_AIC_IDCR, backups);
+ at91_sys_write(AT91_AIC_IECR, wakeups);
+}
+
+void at91_irq_resume(void)
+{
+ at91_sys_write(AT91_AIC_IDCR, wakeups);
+ at91_sys_write(AT91_AIC_IECR, backups);
+}
+
+#else
+#define at91_aic_set_wake NULL
+#endif
+
+static struct irq_chip at91_aic_chip = {
+ .name = "AIC",
+ .ack = at91_aic_mask_irq,
+ .mask = at91_aic_mask_irq,
+ .unmask = at91_aic_unmask_irq,
+ .set_type = at91_aic_set_type,
+ .set_wake = at91_aic_set_wake,
+};
+
+/*
+ * Initialize the AIC interrupt controller.
+ */
+void __init at91_aic_init(unsigned int priority[NR_AIC_IRQS])
+{
+ unsigned int i;
+
+ /*
+ * The IVR is used by macro get_irqnr_and_base to read and verify.
+ * The irq number is NR_AIC_IRQS when a spurious interrupt has occurred.
+ */
+ for (i = 0; i < NR_AIC_IRQS; i++) {
+ /* Put irq number in Source Vector Register: */
+ at91_sys_write(AT91_AIC_SVR(i), i);
+ /* Active Low interrupt, with the specified priority */
+ at91_sys_write(AT91_AIC_SMR(i), AT91_AIC_SRCTYPE_LOW | priority[i]);
+
+ set_irq_chip(i, &at91_aic_chip);
+ set_irq_handler(i, handle_level_irq);
+ set_irq_flags(i, IRQF_VALID | IRQF_PROBE);
+
+ /* Perform 8 End Of Interrupt Command to make sure AIC will not Lock out nIRQ */
+ if (i < 8)
+ at91_sys_write(AT91_AIC_EOICR, 0);
+ }
+
+ /*
+ * Spurious Interrupt ID in Spurious Vector Register is NR_AIC_IRQS
+ * When there is no current interrupt, the IRQ Vector Register reads the value stored in AIC_SPU
+ */
+ at91_sys_write(AT91_AIC_SPU, NR_AIC_IRQS);
+
+ /* No debugging in AIC: Debug (Protect) Control Register */
+ at91_sys_write(AT91_AIC_DCR, 0);
+
+ /* Disable and clear all interrupts initially */
+ at91_sys_write(AT91_AIC_IDCR, 0xFFFFFFFF);
+ at91_sys_write(AT91_AIC_ICCR, 0xFFFFFFFF);
+}