drm/i915: wait for actual vblank, not just 20ms
Waiting for a hard coded 20ms isn't always enough to make sure a vblank
period has actually occurred, so add code to make sure we really have
passed through a vblank period (or that the pipe is off when disabling).
This prevents problems with mode setting and link training, and seems to
fix a bug like https://bugs.freedesktop.org/show_bug.cgi?id=29278, but
on an HP 8440p instead. Hopefully also fixes
https://bugs.freedesktop.org/show_bug.cgi?id=29141.
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index a63e9a1..67e3ec1 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -2081,6 +2081,7 @@
#define PIPE_DITHER_TYPE_ST01 (1 << 2)
/* Pipe A */
#define PIPEADSL 0x70000
+#define DSL_LINEMASK 0x00000fff
#define PIPEACONF 0x70008
#define PIPEACONF_ENABLE (1<<31)
#define PIPEACONF_DISABLE 0
diff --git a/drivers/gpu/drm/i915/intel_crt.c b/drivers/gpu/drm/i915/intel_crt.c
index c43176d..eb31fdf 100644
--- a/drivers/gpu/drm/i915/intel_crt.c
+++ b/drivers/gpu/drm/i915/intel_crt.c
@@ -328,7 +328,7 @@
I915_WRITE(pipeconf_reg, pipeconf | PIPECONF_FORCE_BORDER);
/* Wait for next Vblank to substitue
* border color for Color info */
- intel_wait_for_vblank(dev);
+ intel_wait_for_vblank(dev, pipe);
st00 = I915_READ8(VGA_MSR_WRITE);
status = ((st00 & (1 << 4)) != 0) ?
connector_status_connected :
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 14c45b1..bdea946 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -977,14 +977,54 @@
return true;
}
-void
-intel_wait_for_vblank(struct drm_device *dev)
+/**
+ * intel_wait_for_vblank - wait for vblank on a given pipe
+ * @dev: drm device
+ * @pipe: pipe to wait for
+ *
+ * Wait for vblank to occur on a given pipe. Needed for various bits of
+ * mode setting code.
+ */
+void intel_wait_for_vblank(struct drm_device *dev, int pipe)
{
- /* Wait for 20ms, i.e. one cycle at 50hz. */
- if (in_dbg_master())
- mdelay(20); /* The kernel debugger cannot call msleep() */
- else
- msleep(20);
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ int pipestat_reg = (pipe == 0 ? PIPEASTAT : PIPEBSTAT);
+
+ /* Wait for vblank interrupt bit to set */
+ if (wait_for((I915_READ(pipestat_reg) &
+ PIPE_VBLANK_INTERRUPT_STATUS) == 0,
+ 50, 0))
+ DRM_DEBUG_KMS("vblank wait timed out\n");
+}
+
+/**
+ * intel_wait_for_vblank_off - wait for vblank after disabling a pipe
+ * @dev: drm device
+ * @pipe: pipe to wait for
+ *
+ * After disabling a pipe, we can't wait for vblank in the usual way,
+ * spinning on the vblank interrupt status bit, since we won't actually
+ * see an interrupt when the pipe is disabled.
+ *
+ * So this function waits for the display line value to settle (it
+ * usually ends up stopping at the start of the next frame).
+ */
+void intel_wait_for_vblank_off(struct drm_device *dev, int pipe)
+{
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ int pipedsl_reg = (pipe == 0 ? PIPEADSL : PIPEBDSL);
+ unsigned long timeout = jiffies + msecs_to_jiffies(100);
+ u32 last_line;
+
+ /* Wait for the display line to settle */
+ do {
+ last_line = I915_READ(pipedsl_reg) & DSL_LINEMASK;
+ mdelay(5);
+ } while (((I915_READ(pipedsl_reg) & DSL_LINEMASK) != last_line) &&
+ time_after(timeout, jiffies));
+
+ if (time_after(jiffies, timeout))
+ DRM_DEBUG_KMS("vblank wait timed out\n");
}
/* Parameters have changed, update FBC info */
@@ -1057,8 +1097,6 @@
return;
}
- intel_wait_for_vblank(dev);
-
DRM_DEBUG_KMS("disabled FBC\n");
}
@@ -1115,7 +1153,6 @@
dpfc_ctl = I915_READ(DPFC_CONTROL);
dpfc_ctl &= ~DPFC_CTL_EN;
I915_WRITE(DPFC_CONTROL, dpfc_ctl);
- intel_wait_for_vblank(dev);
DRM_DEBUG_KMS("disabled FBC\n");
}
@@ -1176,7 +1213,6 @@
dpfc_ctl = I915_READ(ILK_DPFC_CONTROL);
dpfc_ctl &= ~DPFC_CTL_EN;
I915_WRITE(ILK_DPFC_CONTROL, dpfc_ctl);
- intel_wait_for_vblank(dev);
DRM_DEBUG_KMS("disabled FBC\n");
}
@@ -1475,7 +1511,7 @@
if ((IS_I965G(dev) || plane == 0))
intel_update_fbc(crtc, &crtc->mode);
- intel_wait_for_vblank(dev);
+ intel_wait_for_vblank(dev, intel_crtc->pipe);
intel_increase_pllclock(crtc, true);
return 0;
@@ -1593,7 +1629,7 @@
if ((IS_I965G(dev) || plane == 0))
intel_update_fbc(crtc, &crtc->mode);
- intel_wait_for_vblank(dev);
+ intel_wait_for_vblank(dev, pipe);
if (old_fb) {
intel_fb = to_intel_framebuffer(old_fb);
@@ -2343,10 +2379,8 @@
I915_READ(dspbase_reg);
}
- if (!IS_I9XX(dev)) {
- /* Wait for vblank for the disable to take effect */
- intel_wait_for_vblank(dev);
- }
+ /* Wait for vblank for the disable to take effect */
+ intel_wait_for_vblank_off(dev, pipe);
/* Don't disable pipe A or pipe A PLLs if needed */
if (pipeconf_reg == PIPEACONF &&
@@ -2361,7 +2395,7 @@
}
/* Wait for vblank for the disable to take effect. */
- intel_wait_for_vblank(dev);
+ intel_wait_for_vblank_off(dev, pipe);
temp = I915_READ(dpll_reg);
if ((temp & DPLL_VCO_ENABLE) != 0) {
@@ -4096,7 +4130,7 @@
I915_WRITE(pipeconf_reg, pipeconf);
I915_READ(pipeconf_reg);
- intel_wait_for_vblank(dev);
+ intel_wait_for_vblank(dev, pipe);
if (IS_IRONLAKE(dev)) {
/* enable address swizzle for tiling buffer */
@@ -4508,7 +4542,7 @@
encoder_funcs->commit(encoder);
}
/* let the connector get through one full cycle before testing */
- intel_wait_for_vblank(dev);
+ intel_wait_for_vblank(dev, intel_crtc->pipe);
return crtc;
}
@@ -4713,7 +4747,7 @@
dpll &= ~DISPLAY_RATE_SELECT_FPA1;
I915_WRITE(dpll_reg, dpll);
dpll = I915_READ(dpll_reg);
- intel_wait_for_vblank(dev);
+ intel_wait_for_vblank(dev, pipe);
dpll = I915_READ(dpll_reg);
if (dpll & DISPLAY_RATE_SELECT_FPA1)
DRM_DEBUG_DRIVER("failed to upclock LVDS!\n");
@@ -4757,7 +4791,7 @@
dpll |= DISPLAY_RATE_SELECT_FPA1;
I915_WRITE(dpll_reg, dpll);
dpll = I915_READ(dpll_reg);
- intel_wait_for_vblank(dev);
+ intel_wait_for_vblank(dev, pipe);
dpll = I915_READ(dpll_reg);
if (!(dpll & DISPLAY_RATE_SELECT_FPA1))
DRM_DEBUG_DRIVER("failed to downclock LVDS!\n");
diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index caaaa8f..9caccd0 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -1145,12 +1145,13 @@
{
struct drm_device *dev = intel_dp->base.enc.dev;
struct drm_i915_private *dev_priv = dev->dev_private;
+ struct intel_crtc *intel_crtc = to_intel_crtc(intel_dp->base.enc.crtc);
int ret;
I915_WRITE(intel_dp->output_reg, dp_reg_value);
POSTING_READ(intel_dp->output_reg);
if (first)
- intel_wait_for_vblank(dev);
+ intel_wait_for_vblank(dev, intel_crtc->pipe);
intel_dp_aux_native_write_1(intel_dp,
DP_TRAINING_PATTERN_SET,
diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
index 6ba56e1..0e92aa0 100644
--- a/drivers/gpu/drm/i915/intel_drv.h
+++ b/drivers/gpu/drm/i915/intel_drv.h
@@ -219,7 +219,8 @@
struct drm_crtc *crtc);
int intel_get_pipe_from_crtc_id(struct drm_device *dev, void *data,
struct drm_file *file_priv);
-extern void intel_wait_for_vblank(struct drm_device *dev);
+extern void intel_wait_for_vblank_off(struct drm_device *dev, int pipe);
+extern void intel_wait_for_vblank(struct drm_device *dev, int pipe);
extern struct drm_crtc *intel_get_crtc_from_pipe(struct drm_device *dev, int pipe);
extern struct drm_crtc *intel_get_load_detect_pipe(struct intel_encoder *intel_encoder,
struct drm_connector *connector,
diff --git a/drivers/gpu/drm/i915/intel_sdvo.c b/drivers/gpu/drm/i915/intel_sdvo.c
index 5c765bb..093e914 100644
--- a/drivers/gpu/drm/i915/intel_sdvo.c
+++ b/drivers/gpu/drm/i915/intel_sdvo.c
@@ -1218,6 +1218,7 @@
struct drm_device *dev = encoder->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_sdvo *intel_sdvo = enc_to_intel_sdvo(encoder);
+ struct intel_crtc *intel_crtc = to_intel_crtc(encoder->crtc);
u32 temp;
if (mode != DRM_MODE_DPMS_ON) {
@@ -1240,7 +1241,7 @@
if ((temp & SDVO_ENABLE) == 0)
intel_sdvo_write_sdvox(intel_sdvo, temp | SDVO_ENABLE);
for (i = 0; i < 2; i++)
- intel_wait_for_vblank(dev);
+ intel_wait_for_vblank(dev, intel_crtc->pipe);
status = intel_sdvo_get_trained_inputs(intel_sdvo, &input1, &input2);
/* Warn if the device reported failure to sync.
diff --git a/drivers/gpu/drm/i915/intel_tv.c b/drivers/gpu/drm/i915/intel_tv.c
index 1bd6e87..d2029ef 100644
--- a/drivers/gpu/drm/i915/intel_tv.c
+++ b/drivers/gpu/drm/i915/intel_tv.c
@@ -1158,11 +1158,11 @@
/* Wait for vblank for the disable to take effect */
if (!IS_I9XX(dev))
- intel_wait_for_vblank(dev);
+ intel_wait_for_vblank(dev, intel_crtc->pipe);
I915_WRITE(pipeconf_reg, pipeconf & ~PIPEACONF_ENABLE);
/* Wait for vblank for the disable to take effect. */
- intel_wait_for_vblank(dev);
+ intel_wait_for_vblank(dev, intel_crtc->pipe);
/* Filter ctl must be set before TV_WIN_SIZE */
I915_WRITE(TV_FILTER_CTL_1, TV_AUTO_SCALE);
@@ -1231,6 +1231,7 @@
struct drm_encoder *encoder = &intel_tv->base.enc;
struct drm_device *dev = encoder->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
+ struct intel_crtc *intel_crtc = to_intel_crtc(encoder->crtc);
unsigned long irqflags;
u32 tv_ctl, save_tv_ctl;
u32 tv_dac, save_tv_dac;
@@ -1267,11 +1268,11 @@
DAC_C_0_7_V);
I915_WRITE(TV_CTL, tv_ctl);
I915_WRITE(TV_DAC, tv_dac);
- intel_wait_for_vblank(dev);
+ intel_wait_for_vblank(dev, intel_crtc->pipe);
tv_dac = I915_READ(TV_DAC);
I915_WRITE(TV_DAC, save_tv_dac);
I915_WRITE(TV_CTL, save_tv_ctl);
- intel_wait_for_vblank(dev);
+ intel_wait_for_vblank(dev, intel_crtc->pipe);
/*
* A B C
* 0 1 1 Composite