cpufreq: exynos: Use APLL_FREQ macro for cpu divider value
Signed-off-by: Jonghwan Choi <jhbird.choi@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
diff --git a/drivers/cpufreq/exynos5250-cpufreq.c b/drivers/cpufreq/exynos5250-cpufreq.c
index 8a5d733..736a5cf 100644
--- a/drivers/cpufreq/exynos5250-cpufreq.c
+++ b/drivers/cpufreq/exynos5250-cpufreq.c
@@ -21,21 +21,18 @@
#include <mach/regs-clock.h>
#include <mach/cpufreq.h>
-#define CPUFREQ_LEVEL_END (L15 + 1)
-
static struct clk *cpu_clk;
static struct clk *moutcore;
static struct clk *mout_mpll;
static struct clk *mout_apll;
-struct cpufreq_clkdiv {
- unsigned int index;
- unsigned int clkdiv;
- unsigned int clkdiv1;
+static unsigned int exynos5250_volt_table[] = {
+ 1300000, 1250000, 1225000, 1200000, 1150000,
+ 1125000, 1100000, 1075000, 1050000, 1025000,
+ 1012500, 1000000, 975000, 950000, 937500,
+ 925000
};
-static unsigned int exynos5250_volt_table[CPUFREQ_LEVEL_END];
-
static struct cpufreq_frequency_table exynos5250_freq_table[] = {
{L0, 1700 * 1000},
{L1, 1600 * 1000},
@@ -45,8 +42,8 @@
{L5, 1200 * 1000},
{L6, 1100 * 1000},
{L7, 1000 * 1000},
- {L8, 900 * 1000},
- {L9, 800 * 1000},
+ {L8, 900 * 1000},
+ {L9, 800 * 1000},
{L10, 700 * 1000},
{L11, 600 * 1000},
{L12, 500 * 1000},
@@ -56,78 +53,30 @@
{0, CPUFREQ_TABLE_END},
};
-static struct cpufreq_clkdiv exynos5250_clkdiv_table[CPUFREQ_LEVEL_END];
-
-static unsigned int clkdiv_cpu0_5250[CPUFREQ_LEVEL_END][8] = {
+static struct apll_freq apll_freq_5250[] = {
/*
- * Clock divider value for following
- * { ARM, CPUD, ACP, PERIPH, ATB, PCLK_DBG, APLL, ARM2 }
+ * values:
+ * freq
+ * clock divider for ARM, CPUD, ACP, PERIPH, ATB, PCLK_DBG, APLL, ARM2
+ * clock divider for COPY, HPM, RESERVED
+ * PLL M, P, S
*/
- { 0, 3, 7, 7, 7, 3, 5, 0 }, /* 1700 MHz */
- { 0, 3, 7, 7, 7, 1, 4, 0 }, /* 1600 MHz */
- { 0, 2, 7, 7, 7, 1, 4, 0 }, /* 1500 MHz */
- { 0, 2, 7, 7, 6, 1, 4, 0 }, /* 1400 MHz */
- { 0, 2, 7, 7, 6, 1, 3, 0 }, /* 1300 MHz */
- { 0, 2, 7, 7, 5, 1, 3, 0 }, /* 1200 MHz */
- { 0, 3, 7, 7, 5, 1, 3, 0 }, /* 1100 MHz */
- { 0, 1, 7, 7, 4, 1, 2, 0 }, /* 1000 MHz */
- { 0, 1, 7, 7, 4, 1, 2, 0 }, /* 900 MHz */
- { 0, 1, 7, 7, 4, 1, 2, 0 }, /* 800 MHz */
- { 0, 1, 7, 7, 3, 1, 1, 0 }, /* 700 MHz */
- { 0, 1, 7, 7, 3, 1, 1, 0 }, /* 600 MHz */
- { 0, 1, 7, 7, 2, 1, 1, 0 }, /* 500 MHz */
- { 0, 1, 7, 7, 2, 1, 1, 0 }, /* 400 MHz */
- { 0, 1, 7, 7, 1, 1, 1, 0 }, /* 300 MHz */
- { 0, 1, 7, 7, 1, 1, 1, 0 }, /* 200 MHz */
-};
-
-static unsigned int clkdiv_cpu1_5250[CPUFREQ_LEVEL_END][2] = {
- /* Clock divider value for following
- * { COPY, HPM }
- */
- { 0, 2 }, /* 1700 MHz */
- { 0, 2 }, /* 1600 MHz */
- { 0, 2 }, /* 1500 MHz */
- { 0, 2 }, /* 1400 MHz */
- { 0, 2 }, /* 1300 MHz */
- { 0, 2 }, /* 1200 MHz */
- { 0, 2 }, /* 1100 MHz */
- { 0, 2 }, /* 1000 MHz */
- { 0, 2 }, /* 900 MHz */
- { 0, 2 }, /* 800 MHz */
- { 0, 2 }, /* 700 MHz */
- { 0, 2 }, /* 600 MHz */
- { 0, 2 }, /* 500 MHz */
- { 0, 2 }, /* 400 MHz */
- { 0, 2 }, /* 300 MHz */
- { 0, 2 }, /* 200 MHz */
-};
-
-static unsigned int exynos5_apll_pms_table[CPUFREQ_LEVEL_END] = {
- ((425 << 16) | (6 << 8) | 0), /* 1700 MHz */
- ((200 << 16) | (3 << 8) | 0), /* 1600 MHz */
- ((250 << 16) | (4 << 8) | 0), /* 1500 MHz */
- ((175 << 16) | (3 << 8) | 0), /* 1400 MHz */
- ((325 << 16) | (6 << 8) | 0), /* 1300 MHz */
- ((200 << 16) | (4 << 8) | 0), /* 1200 MHz */
- ((275 << 16) | (6 << 8) | 0), /* 1100 MHz */
- ((125 << 16) | (3 << 8) | 0), /* 1000 MHz */
- ((150 << 16) | (4 << 8) | 0), /* 900 MHz */
- ((100 << 16) | (3 << 8) | 0), /* 800 MHz */
- ((175 << 16) | (3 << 8) | 1), /* 700 MHz */
- ((200 << 16) | (4 << 8) | 1), /* 600 MHz */
- ((125 << 16) | (3 << 8) | 1), /* 500 MHz */
- ((100 << 16) | (3 << 8) | 1), /* 400 MHz */
- ((200 << 16) | (4 << 8) | 2), /* 300 MHz */
- ((100 << 16) | (3 << 8) | 2), /* 200 MHz */
-};
-
-/* ASV group voltage table */
-static const unsigned int asv_voltage_5250[CPUFREQ_LEVEL_END] = {
- 1300000, 1250000, 1225000, 1200000, 1150000,
- 1125000, 1100000, 1075000, 1050000, 1025000,
- 1012500, 1000000, 975000, 950000, 937500,
- 925000
+ APLL_FREQ(1700, 0, 3, 7, 7, 7, 3, 5, 0, 0, 2, 0, 425, 6, 0),
+ APLL_FREQ(1600, 0, 3, 7, 7, 7, 1, 4, 0, 0, 2, 0, 200, 3, 0),
+ APLL_FREQ(1500, 0, 2, 7, 7, 7, 1, 4, 0, 0, 2, 0, 250, 4, 0),
+ APLL_FREQ(1400, 0, 2, 7, 7, 6, 1, 4, 0, 0, 2, 0, 175, 3, 0),
+ APLL_FREQ(1300, 0, 2, 7, 7, 6, 1, 3, 0, 0, 2, 0, 325, 6, 0),
+ APLL_FREQ(1200, 0, 2, 7, 7, 5, 1, 3, 0, 0, 2, 0, 200, 4, 0),
+ APLL_FREQ(1100, 0, 3, 7, 7, 5, 1, 3, 0, 0, 2, 0, 275, 6, 0),
+ APLL_FREQ(1000, 0, 1, 7, 7, 4, 1, 2, 0, 0, 2, 0, 125, 3, 0),
+ APLL_FREQ(900, 0, 1, 7, 7, 4, 1, 2, 0, 0, 2, 0, 150, 4, 0),
+ APLL_FREQ(800, 0, 1, 7, 7, 4, 1, 2, 0, 0, 2, 0, 100, 3, 0),
+ APLL_FREQ(700, 0, 1, 7, 7, 3, 1, 1, 0, 0, 2, 0, 175, 3, 1),
+ APLL_FREQ(600, 0, 1, 7, 7, 3, 1, 1, 0, 0, 2, 0, 200, 4, 1),
+ APLL_FREQ(500, 0, 1, 7, 7, 2, 1, 1, 0, 0, 2, 0, 125, 3, 1),
+ APLL_FREQ(400, 0, 1, 7, 7, 2, 1, 1, 0, 0, 2, 0, 100, 3, 1),
+ APLL_FREQ(300, 0, 1, 7, 7, 1, 1, 1, 0, 0, 2, 0, 200, 4, 2),
+ APLL_FREQ(200, 0, 1, 7, 7, 1, 1, 1, 0, 0, 2, 0, 100, 3, 2),
};
static void set_clkdiv(unsigned int div_index)
@@ -136,7 +85,7 @@
/* Change Divider - CPU0 */
- tmp = exynos5250_clkdiv_table[div_index].clkdiv;
+ tmp = apll_freq_5250[div_index].clk_div_cpu0;
__raw_writel(tmp, EXYNOS5_CLKDIV_CPU0);
@@ -144,7 +93,7 @@
cpu_relax();
/* Change Divider - CPU1 */
- tmp = exynos5250_clkdiv_table[div_index].clkdiv1;
+ tmp = apll_freq_5250[div_index].clk_div_cpu1;
__raw_writel(tmp, EXYNOS5_CLKDIV_CPU1);
@@ -167,14 +116,14 @@
} while (tmp != 0x2);
/* 2. Set APLL Lock time */
- pdiv = ((exynos5_apll_pms_table[new_index] >> 8) & 0x3f);
+ pdiv = ((apll_freq_5250[new_index].mps >> 8) & 0x3f);
__raw_writel((pdiv * 250), EXYNOS5_APLL_LOCK);
/* 3. Change PLL PMS values */
tmp = __raw_readl(EXYNOS5_APLL_CON0);
tmp &= ~((0x3ff << 16) | (0x3f << 8) | (0x7 << 0));
- tmp |= exynos5_apll_pms_table[new_index];
+ tmp |= apll_freq_5250[new_index].mps;
__raw_writel(tmp, EXYNOS5_APLL_CON0);
/* 4. wait_lock_time */
@@ -196,8 +145,8 @@
bool exynos5250_pms_change(unsigned int old_index, unsigned int new_index)
{
- unsigned int old_pm = (exynos5_apll_pms_table[old_index] >> 8);
- unsigned int new_pm = (exynos5_apll_pms_table[new_index] >> 8);
+ unsigned int old_pm = apll_freq_5250[old_index].mps >> 8;
+ unsigned int new_pm = apll_freq_5250[new_index].mps >> 8;
return (old_pm == new_pm) ? 0 : 1;
}
@@ -214,7 +163,7 @@
/* 2. Change just s value in apll m,p,s value */
tmp = __raw_readl(EXYNOS5_APLL_CON0);
tmp &= ~(0x7 << 0);
- tmp |= (exynos5_apll_pms_table[new_index] & 0x7);
+ tmp |= apll_freq_5250[new_index].mps & 0x7;
__raw_writel(tmp, EXYNOS5_APLL_CON0);
} else {
@@ -229,7 +178,7 @@
/* 1. Change just s value in apll m,p,s value */
tmp = __raw_readl(EXYNOS5_APLL_CON0);
tmp &= ~(0x7 << 0);
- tmp |= (exynos5_apll_pms_table[new_index] & 0x7);
+ tmp |= apll_freq_5250[new_index].mps & 0x7;
__raw_writel(tmp, EXYNOS5_APLL_CON0);
/* 2. Change the system clock divider values */
set_clkdiv(new_index);
@@ -243,22 +192,10 @@
}
}
-static void __init set_volt_table(void)
-{
- unsigned int i;
-
- for (i = 0 ; i < CPUFREQ_LEVEL_END ; i++)
- exynos5250_volt_table[i] = asv_voltage_5250[i];
-}
-
int exynos5250_cpufreq_init(struct exynos_dvfs_info *info)
{
- int i;
- unsigned int tmp;
unsigned long rate;
- set_volt_table();
-
cpu_clk = clk_get(NULL, "armclk");
if (IS_ERR(cpu_clk))
return PTR_ERR(cpu_clk);
@@ -277,37 +214,6 @@
if (IS_ERR(mout_apll))
goto err_mout_apll;
- for (i = L0; i < CPUFREQ_LEVEL_END; i++) {
-
- exynos5250_clkdiv_table[i].index = i;
-
- tmp = __raw_readl(EXYNOS5_CLKDIV_CPU0);
-
- tmp &= ~((0x7 << 0) | (0x7 << 4) | (0x7 << 8) |
- (0x7 << 12) | (0x7 << 16) | (0x7 << 20) |
- (0x7 << 24) | (0x7 << 28));
-
- tmp |= ((clkdiv_cpu0_5250[i][0] << 0) |
- (clkdiv_cpu0_5250[i][1] << 4) |
- (clkdiv_cpu0_5250[i][2] << 8) |
- (clkdiv_cpu0_5250[i][3] << 12) |
- (clkdiv_cpu0_5250[i][4] << 16) |
- (clkdiv_cpu0_5250[i][5] << 20) |
- (clkdiv_cpu0_5250[i][6] << 24) |
- (clkdiv_cpu0_5250[i][7] << 28));
-
- exynos5250_clkdiv_table[i].clkdiv = tmp;
-
- tmp = __raw_readl(EXYNOS5_CLKDIV_CPU1);
-
- tmp &= ~((0x7 << 0) | (0x7 << 4));
-
- tmp |= ((clkdiv_cpu1_5250[i][0] << 0) |
- (clkdiv_cpu1_5250[i][1] << 4));
-
- exynos5250_clkdiv_table[i].clkdiv1 = tmp;
- }
-
info->mpll_freq_khz = rate;
/* 800Mhz */
info->pll_safe_idx = L9;