Merge branch 'pci/pciehp' into next
* pci/pciehp:
PCI: pciehp: Cleanup whitespace
PCI: pciehp: Remove a non-existent card, regardless of "surprise" capability
PCI: pciehp: Don't turn slot off when hot-added device already exists
PCI: pciehp: Add hotplug_lock to serialize hotplug events
PCI: pciehp: Ensure very fast hotplug events are also processed
PCI: pciehp: Disable link notification across slot reset
PCI: pciehp: Don't check adapter or latch status while disabling
PCI: pciehp: Don't disable the link permanently during removal
PCI: pciehp: Enable link state change notifications
PCI: pciehp: Use link change notifications for hot-plug and removal
PCI: pciehp: Make check_link_active() non-static
diff --git a/Documentation/PCI/MSI-HOWTO.txt b/Documentation/PCI/MSI-HOWTO.txt
index a8d0100..10a9369 100644
--- a/Documentation/PCI/MSI-HOWTO.txt
+++ b/Documentation/PCI/MSI-HOWTO.txt
@@ -82,7 +82,19 @@
has to request that the PCI layer set up the MSI capability for this
device.
-4.2.1 pci_enable_msi_range
+4.2.1 pci_enable_msi
+
+int pci_enable_msi(struct pci_dev *dev)
+
+A successful call allocates ONE interrupt to the device, regardless
+of how many MSIs the device supports. The device is switched from
+pin-based interrupt mode to MSI mode. The dev->irq number is changed
+to a new number which represents the message signaled interrupt;
+consequently, this function should be called before the driver calls
+request_irq(), because an MSI is delivered via a vector that is
+different from the vector of a pin-based interrupt.
+
+4.2.2 pci_enable_msi_range
int pci_enable_msi_range(struct pci_dev *dev, int minvec, int maxvec)
@@ -147,6 +159,11 @@
return pci_enable_msi_range(pdev, nvec, nvec);
}
+Note, unlike pci_enable_msi_exact() function, which could be also used to
+enable a particular number of MSI-X interrupts, pci_enable_msi_range()
+returns either a negative errno or 'nvec' (not negative errno or 0 - as
+pci_enable_msi_exact() does).
+
4.2.1.3 Single MSI mode
The most notorious example of the request type described above is
@@ -158,7 +175,27 @@
return pci_enable_msi_range(pdev, 1, 1);
}
-4.2.2 pci_disable_msi
+Note, unlike pci_enable_msi() function, which could be also used to
+enable the single MSI mode, pci_enable_msi_range() returns either a
+negative errno or 1 (not negative errno or 0 - as pci_enable_msi()
+does).
+
+4.2.3 pci_enable_msi_exact
+
+int pci_enable_msi_exact(struct pci_dev *dev, int nvec)
+
+This variation on pci_enable_msi_range() call allows a device driver to
+request exactly 'nvec' MSIs.
+
+If this function returns a negative number, it indicates an error and
+the driver should not attempt to request any more MSI interrupts for
+this device.
+
+By contrast with pci_enable_msi_range() function, pci_enable_msi_exact()
+returns zero in case of success, which indicates MSI interrupts have been
+successfully allocated.
+
+4.2.4 pci_disable_msi
void pci_disable_msi(struct pci_dev *dev)
@@ -172,7 +209,7 @@
Failure to do so results in a BUG_ON(), leaving the device with
MSI enabled and thus leaking its vector.
-4.2.3 pci_msi_vec_count
+4.2.4 pci_msi_vec_count
int pci_msi_vec_count(struct pci_dev *dev)
@@ -257,8 +294,8 @@
static int foo_driver_enable_msix(struct foo_adapter *adapter, int nvec)
{
- return pci_enable_msi_range(adapter->pdev, adapter->msix_entries,
- 1, nvec);
+ return pci_enable_msix_range(adapter->pdev, adapter->msix_entries,
+ 1, nvec);
}
Note the value of 'minvec' parameter is 1. As 'minvec' is inclusive,
@@ -269,8 +306,8 @@
static int foo_driver_enable_msix(struct foo_adapter *adapter, int nvec)
{
- return pci_enable_msi_range(adapter->pdev, adapter->msix_entries,
- FOO_DRIVER_MINIMUM_NVEC, nvec);
+ return pci_enable_msix_range(adapter->pdev, adapter->msix_entries,
+ FOO_DRIVER_MINIMUM_NVEC, nvec);
}
4.3.1.2 Exact number of MSI-X interrupts
@@ -282,10 +319,15 @@
static int foo_driver_enable_msix(struct foo_adapter *adapter, int nvec)
{
- return pci_enable_msi_range(adapter->pdev, adapter->msix_entries,
- nvec, nvec);
+ return pci_enable_msix_range(adapter->pdev, adapter->msix_entries,
+ nvec, nvec);
}
+Note, unlike pci_enable_msix_exact() function, which could be also used to
+enable a particular number of MSI-X interrupts, pci_enable_msix_range()
+returns either a negative errno or 'nvec' (not negative errno or 0 - as
+pci_enable_msix_exact() does).
+
4.3.1.3 Specific requirements to the number of MSI-X interrupts
As noted above, there could be devices that can not operate with just any
@@ -332,7 +374,64 @@
any error code other than -ENOSPC indicates a fatal error and should not
be retried.
-4.3.2 pci_disable_msix
+4.3.2 pci_enable_msix_exact
+
+int pci_enable_msix_exact(struct pci_dev *dev,
+ struct msix_entry *entries, int nvec)
+
+This variation on pci_enable_msix_range() call allows a device driver to
+request exactly 'nvec' MSI-Xs.
+
+If this function returns a negative number, it indicates an error and
+the driver should not attempt to allocate any more MSI-X interrupts for
+this device.
+
+By contrast with pci_enable_msix_range() function, pci_enable_msix_exact()
+returns zero in case of success, which indicates MSI-X interrupts have been
+successfully allocated.
+
+Another version of a routine that enables MSI-X mode for a device with
+specific requirements described in chapter 4.3.1.3 might look like this:
+
+/*
+ * Assume 'minvec' and 'maxvec' are non-zero
+ */
+static int foo_driver_enable_msix(struct foo_adapter *adapter,
+ int minvec, int maxvec)
+{
+ int rc;
+
+ minvec = roundup_pow_of_two(minvec);
+ maxvec = rounddown_pow_of_two(maxvec);
+
+ if (minvec > maxvec)
+ return -ERANGE;
+
+retry:
+ rc = pci_enable_msix_exact(adapter->pdev,
+ adapter->msix_entries, maxvec);
+
+ /*
+ * -ENOSPC is the only error code allowed to be analyzed
+ */
+ if (rc == -ENOSPC) {
+ if (maxvec == 1)
+ return -ENOSPC;
+
+ maxvec /= 2;
+
+ if (minvec > maxvec)
+ return -ENOSPC;
+
+ goto retry;
+ } else if (rc < 0) {
+ return rc;
+ }
+
+ return maxvec;
+}
+
+4.3.3 pci_disable_msix
void pci_disable_msix(struct pci_dev *dev)
diff --git a/arch/arm/kernel/bios32.c b/arch/arm/kernel/bios32.c
index 317da88..d0d4678 100644
--- a/arch/arm/kernel/bios32.c
+++ b/arch/arm/kernel/bios32.c
@@ -19,7 +19,7 @@
static int debug_pci;
/*
- * We can't use pci_find_device() here since we are
+ * We can't use pci_get_device() here since we are
* called from interrupt context.
*/
static void pcibios_bus_report_status(struct pci_bus *bus, u_int status_mask, int warn)
@@ -57,13 +57,10 @@
void pcibios_report_status(u_int status_mask, int warn)
{
- struct list_head *l;
+ struct pci_bus *bus;
- list_for_each(l, &pci_root_buses) {
- struct pci_bus *bus = pci_bus_b(l);
-
+ list_for_each_entry(bus, &pci_root_buses, node)
pcibios_bus_report_status(bus, status_mask, warn);
- }
}
/*
diff --git a/arch/frv/mb93090-mb00/pci-frv.c b/arch/frv/mb93090-mb00/pci-frv.c
index c281217..67b1d16 100644
--- a/arch/frv/mb93090-mb00/pci-frv.c
+++ b/arch/frv/mb93090-mb00/pci-frv.c
@@ -88,7 +88,7 @@
/* Depth-First Search on bus tree */
for (ln=bus_list->next; ln != bus_list; ln=ln->next) {
- bus = pci_bus_b(ln);
+ bus = list_entry(ln, struct pci_bus, node);
if ((dev = bus->self)) {
for (idx = PCI_BRIDGE_RESOURCES; idx < PCI_NUM_RESOURCES; idx++) {
r = &dev->resource[idx];
diff --git a/arch/ia64/hp/common/sba_iommu.c b/arch/ia64/hp/common/sba_iommu.c
index 8e858b5..007361d 100644
--- a/arch/ia64/hp/common/sba_iommu.c
+++ b/arch/ia64/hp/common/sba_iommu.c
@@ -1140,11 +1140,13 @@
#ifdef CONFIG_NUMA
{
+ int node = ioc->node;
struct page *page;
- page = alloc_pages_exact_node(ioc->node == MAX_NUMNODES ?
- numa_node_id() : ioc->node, flags,
- get_order(size));
+ if (node == NUMA_NO_NODE)
+ node = numa_node_id();
+
+ page = alloc_pages_exact_node(node, flags, get_order(size));
if (unlikely(!page))
return NULL;
@@ -1914,7 +1916,7 @@
seq_printf(s, "Hewlett Packard %s IOC rev %d.%d\n",
ioc->name, ((ioc->rev >> 4) & 0xF), (ioc->rev & 0xF));
#ifdef CONFIG_NUMA
- if (ioc->node != MAX_NUMNODES)
+ if (ioc->node != NUMA_NO_NODE)
seq_printf(s, "NUMA node : %d\n", ioc->node);
#endif
seq_printf(s, "IOVA size : %ld MB\n", ((ioc->pdir_size >> 3) * iovp_size)/(1024*1024));
@@ -2015,31 +2017,19 @@
printk(KERN_WARNING "No IOC for PCI Bus %04x:%02x in ACPI\n", pci_domain_nr(bus), bus->number);
}
-#ifdef CONFIG_NUMA
static void __init
sba_map_ioc_to_node(struct ioc *ioc, acpi_handle handle)
{
+#ifdef CONFIG_NUMA
unsigned int node;
- int pxm;
- ioc->node = MAX_NUMNODES;
-
- pxm = acpi_get_pxm(handle);
-
- if (pxm < 0)
- return;
-
- node = pxm_to_node(pxm);
-
- if (node >= MAX_NUMNODES || !node_online(node))
- return;
+ node = acpi_get_node(handle);
+ if (node != NUMA_NO_NODE && !node_online(node))
+ node = NUMA_NO_NODE;
ioc->node = node;
- return;
-}
-#else
-#define sba_map_ioc_to_node(ioc, handle)
#endif
+}
static int __init
acpi_sba_ioc_add(struct acpi_device *device,
diff --git a/arch/ia64/include/asm/pci.h b/arch/ia64/include/asm/pci.h
index 71fbaaa..7d41cc0 100644
--- a/arch/ia64/include/asm/pci.h
+++ b/arch/ia64/include/asm/pci.h
@@ -98,7 +98,7 @@
struct acpi_device *companion;
void *iommu;
int segment;
- int node; /* nearest node with memory or -1 for global allocation */
+ int node; /* nearest node with memory or NUMA_NO_NODE for global allocation */
void *platform_data;
};
diff --git a/arch/ia64/kernel/acpi.c b/arch/ia64/kernel/acpi.c
index 07d209c..5a585eb 100644
--- a/arch/ia64/kernel/acpi.c
+++ b/arch/ia64/kernel/acpi.c
@@ -803,14 +803,9 @@
* ACPI based hotplug CPU support
*/
#ifdef CONFIG_ACPI_HOTPLUG_CPU
-static
-int acpi_map_cpu2node(acpi_handle handle, int cpu, int physid)
+static int acpi_map_cpu2node(acpi_handle handle, int cpu, int physid)
{
#ifdef CONFIG_ACPI_NUMA
- int pxm_id;
- int nid;
-
- pxm_id = acpi_get_pxm(handle);
/*
* We don't have cpu-only-node hotadd. But if the system equips
* SRAT table, pxm is already found and node is ready.
@@ -818,11 +813,10 @@
* This code here is for the system which doesn't have full SRAT
* table for possible cpus.
*/
- nid = acpi_map_pxm_to_node(pxm_id);
node_cpuid[cpu].phys_id = physid;
- node_cpuid[cpu].nid = nid;
+ node_cpuid[cpu].nid = acpi_get_node(handle);
#endif
- return (0);
+ return 0;
}
int additional_cpus __initdata = -1;
@@ -929,7 +923,7 @@
union acpi_object *obj;
struct acpi_madt_io_sapic *iosapic;
unsigned int gsi_base;
- int pxm, node;
+ int node;
/* Only care about objects w/ a method that returns the MADT */
if (ACPI_FAILURE(acpi_evaluate_object(handle, "_MAT", NULL, &buffer)))
@@ -956,17 +950,9 @@
kfree(buffer.pointer);
- /*
- * OK, it's an IOSAPIC MADT entry, look for a _PXM value to tell
- * us which node to associate this with.
- */
- pxm = acpi_get_pxm(handle);
- if (pxm < 0)
- return AE_OK;
-
- node = pxm_to_node(pxm);
-
- if (node >= MAX_NUMNODES || !node_online(node) ||
+ /* OK, it's an IOSAPIC MADT entry; associate it with a node */
+ node = acpi_get_node(handle);
+ if (node == NUMA_NO_NODE || !node_online(node) ||
cpumask_empty(cpumask_of_node(node)))
return AE_OK;
diff --git a/arch/ia64/pci/fixup.c b/arch/ia64/pci/fixup.c
index 5dc969d..eee069a 100644
--- a/arch/ia64/pci/fixup.c
+++ b/arch/ia64/pci/fixup.c
@@ -5,6 +5,7 @@
#include <linux/pci.h>
#include <linux/init.h>
+#include <linux/vgaarb.h>
#include <asm/machvec.h>
@@ -19,9 +20,10 @@
* IORESOURCE_ROM_SHADOW is used to associate the boot video
* card with this copy. On laptops this copy has to be used since
* the main ROM may be compressed or combined with another image.
- * See pci_map_rom() for use of this flag. IORESOURCE_ROM_SHADOW
- * is marked here since the boot video device will be the only enabled
- * video device at this point.
+ * See pci_map_rom() for use of this flag. Before marking the device
+ * with IORESOURCE_ROM_SHADOW check if a vga_default_device is already set
+ * by either arch cde or vga-arbitration, if so only apply the fixup to this
+ * already determined primary video card.
*/
static void pci_fixup_video(struct pci_dev *pdev)
@@ -35,9 +37,6 @@
return;
/* Maybe, this machine supports legacy memory map. */
- if ((pdev->class >> 8) != PCI_CLASS_DISPLAY_VGA)
- return;
-
/* Is VGA routed to us? */
bus = pdev->bus;
while (bus) {
@@ -60,10 +59,14 @@
}
bus = bus->parent;
}
- pci_read_config_word(pdev, PCI_COMMAND, &config);
- if (config & (PCI_COMMAND_IO | PCI_COMMAND_MEMORY)) {
- pdev->resource[PCI_ROM_RESOURCE].flags |= IORESOURCE_ROM_SHADOW;
- dev_printk(KERN_DEBUG, &pdev->dev, "Boot video device\n");
+ if (!vga_default_device() || pdev == vga_default_device()) {
+ pci_read_config_word(pdev, PCI_COMMAND, &config);
+ if (config & (PCI_COMMAND_IO | PCI_COMMAND_MEMORY)) {
+ pdev->resource[PCI_ROM_RESOURCE].flags |= IORESOURCE_ROM_SHADOW;
+ dev_printk(KERN_DEBUG, &pdev->dev, "Boot video device\n");
+ vga_set_default_device(pdev);
+ }
}
}
-DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, pci_fixup_video);
+DECLARE_PCI_FIXUP_CLASS_FINAL(PCI_ANY_ID, PCI_ANY_ID,
+ PCI_CLASS_DISPLAY_VGA, 8, pci_fixup_video);
diff --git a/arch/ia64/pci/pci.c b/arch/ia64/pci/pci.c
index 9e4938d..291a582 100644
--- a/arch/ia64/pci/pci.c
+++ b/arch/ia64/pci/pci.c
@@ -126,7 +126,6 @@
return NULL;
controller->segment = seg;
- controller->node = -1;
return controller;
}
@@ -430,19 +429,14 @@
struct pci_root_info *info = NULL;
int busnum = root->secondary.start;
struct pci_bus *pbus;
- int pxm, ret;
+ int ret;
controller = alloc_pci_controller(domain);
if (!controller)
return NULL;
controller->companion = device;
-
- pxm = acpi_get_pxm(device->handle);
-#ifdef CONFIG_NUMA
- if (pxm >= 0)
- controller->node = pxm_to_node(pxm);
-#endif
+ controller->node = acpi_get_node(device->handle);
info = kzalloc(sizeof(*info), GFP_KERNEL);
if (!info) {
diff --git a/arch/powerpc/kernel/pci_64.c b/arch/powerpc/kernel/pci_64.c
index a9e311f..2a47790 100644
--- a/arch/powerpc/kernel/pci_64.c
+++ b/arch/powerpc/kernel/pci_64.c
@@ -208,7 +208,6 @@
unsigned long in_devfn)
{
struct pci_controller* hose;
- struct list_head *ln;
struct pci_bus *bus = NULL;
struct device_node *hose_node;
@@ -230,8 +229,7 @@
* used on pre-domains setup. We return the first match
*/
- for (ln = pci_root_buses.next; ln != &pci_root_buses; ln = ln->next) {
- bus = pci_bus_b(ln);
+ list_for_each_entry(bus, &pci_root_buses, node) {
if (in_bus >= bus->number && in_bus <= bus->busn_res.end)
break;
bus = NULL;
diff --git a/arch/powerpc/platforms/pseries/pci_dlpar.c b/arch/powerpc/platforms/pseries/pci_dlpar.c
index efe6137..203cbf0 100644
--- a/arch/powerpc/platforms/pseries/pci_dlpar.c
+++ b/arch/powerpc/platforms/pseries/pci_dlpar.c
@@ -37,15 +37,15 @@
struct device_node *dn)
{
struct pci_bus *child = NULL;
- struct list_head *tmp;
+ struct pci_bus *tmp;
struct device_node *busdn;
busdn = pci_bus_to_OF_node(bus);
if (busdn == dn)
return bus;
- list_for_each(tmp, &bus->children) {
- child = find_bus_among_children(pci_bus_b(tmp), dn);
+ list_for_each_entry(tmp, &bus->children, node) {
+ child = find_bus_among_children(tmp, dn);
if (child)
break;
};
diff --git a/arch/x86/include/asm/pci.h b/arch/x86/include/asm/pci.h
index 1ac6114..96ae4f4 100644
--- a/arch/x86/include/asm/pci.h
+++ b/arch/x86/include/asm/pci.h
@@ -26,11 +26,6 @@
extern int noioapicquirk;
extern int noioapicreroute;
-/* scan a bus after allocating a pci_sysdata for it */
-extern struct pci_bus *pci_scan_bus_on_node(int busno, struct pci_ops *ops,
- int node);
-extern struct pci_bus *pci_scan_bus_with_sysdata(int busno);
-
#ifdef CONFIG_PCI
#ifdef CONFIG_PCI_DOMAINS
@@ -70,7 +65,7 @@
extern int pcibios_enabled;
void pcibios_config_init(void);
-struct pci_bus *pcibios_scan_root(int bus);
+void pcibios_scan_root(int bus);
void pcibios_set_master(struct pci_dev *dev);
void pcibios_penalize_isa_irq(int irq, int active);
diff --git a/arch/x86/include/asm/topology.h b/arch/x86/include/asm/topology.h
index d35f24e..c840571a 100644
--- a/arch/x86/include/asm/topology.h
+++ b/arch/x86/include/asm/topology.h
@@ -131,6 +131,7 @@
}
struct pci_bus;
+int x86_pci_root_bus_node(int bus);
void x86_pci_root_bus_resources(int bus, struct list_head *resources);
#ifdef CONFIG_SMP
@@ -139,17 +140,4 @@
#define smt_capable() (smp_num_siblings > 1)
#endif
-#ifdef CONFIG_NUMA
-extern int get_mp_bus_to_node(int busnum);
-extern void set_mp_bus_to_node(int busnum, int node);
-#else
-static inline int get_mp_bus_to_node(int busnum)
-{
- return 0;
-}
-static inline void set_mp_bus_to_node(int busnum, int node)
-{
-}
-#endif
-
#endif /* _ASM_X86_TOPOLOGY_H */
diff --git a/arch/x86/pci/acpi.c b/arch/x86/pci/acpi.c
index 4f25ec0..01edac6 100644
--- a/arch/x86/pci/acpi.c
+++ b/arch/x86/pci/acpi.c
@@ -218,9 +218,8 @@
}
#endif
-static acpi_status
-resource_to_addr(struct acpi_resource *resource,
- struct acpi_resource_address64 *addr)
+static acpi_status resource_to_addr(struct acpi_resource *resource,
+ struct acpi_resource_address64 *addr)
{
acpi_status status;
struct acpi_resource_memory24 *memory24;
@@ -265,8 +264,7 @@
return AE_ERROR;
}
-static acpi_status
-count_resource(struct acpi_resource *acpi_res, void *data)
+static acpi_status count_resource(struct acpi_resource *acpi_res, void *data)
{
struct pci_root_info *info = data;
struct acpi_resource_address64 addr;
@@ -278,8 +276,7 @@
return AE_OK;
}
-static acpi_status
-setup_resource(struct acpi_resource *acpi_res, void *data)
+static acpi_status setup_resource(struct acpi_resource *acpi_res, void *data)
{
struct pci_root_info *info = data;
struct resource *res;
@@ -435,9 +432,9 @@
__release_pci_root_info(info);
}
-static void
-probe_pci_root_info(struct pci_root_info *info, struct acpi_device *device,
- int busnum, int domain)
+static void probe_pci_root_info(struct pci_root_info *info,
+ struct acpi_device *device,
+ int busnum, int domain)
{
size_t size;
@@ -473,16 +470,13 @@
struct pci_bus *pci_acpi_scan_root(struct acpi_pci_root *root)
{
struct acpi_device *device = root->device;
- struct pci_root_info *info = NULL;
+ struct pci_root_info *info;
int domain = root->segment;
int busnum = root->secondary.start;
LIST_HEAD(resources);
- struct pci_bus *bus = NULL;
+ struct pci_bus *bus;
struct pci_sysdata *sd;
int node;
-#ifdef CONFIG_ACPI_NUMA
- int pxm;
-#endif
if (pci_ignore_seg)
domain = 0;
@@ -494,19 +488,12 @@
return NULL;
}
- node = -1;
-#ifdef CONFIG_ACPI_NUMA
- pxm = acpi_get_pxm(device->handle);
- if (pxm >= 0)
- node = pxm_to_node(pxm);
- if (node != -1)
- set_mp_bus_to_node(busnum, node);
- else
-#endif
- node = get_mp_bus_to_node(busnum);
+ node = acpi_get_node(device->handle);
+ if (node == NUMA_NO_NODE)
+ node = x86_pci_root_bus_node(busnum);
- if (node != -1 && !node_online(node))
- node = -1;
+ if (node != NUMA_NO_NODE && !node_online(node))
+ node = NUMA_NO_NODE;
info = kzalloc(sizeof(*info), GFP_KERNEL);
if (!info) {
@@ -519,15 +506,12 @@
sd->domain = domain;
sd->node = node;
sd->companion = device;
- /*
- * Maybe the desired pci bus has been already scanned. In such case
- * it is unnecessary to scan the pci bus with the given domain,busnum.
- */
+
bus = pci_find_bus(domain, busnum);
if (bus) {
/*
- * If the desired bus exits, the content of bus->sysdata will
- * be replaced by sd.
+ * If the desired bus has been scanned already, replace
+ * its bus->sysdata.
*/
memcpy(bus->sysdata, sd, sizeof(*sd));
kfree(info);
@@ -572,15 +556,8 @@
pcie_bus_configure_settings(child);
}
- if (bus && node != -1) {
-#ifdef CONFIG_ACPI_NUMA
- if (pxm >= 0)
- dev_printk(KERN_DEBUG, &bus->dev,
- "on NUMA node %d (pxm %d)\n", node, pxm);
-#else
+ if (bus && node != NUMA_NO_NODE)
dev_printk(KERN_DEBUG, &bus->dev, "on NUMA node %d\n", node);
-#endif
- }
return bus;
}
diff --git a/arch/x86/pci/amd_bus.c b/arch/x86/pci/amd_bus.c
index a48be98..a313a7f 100644
--- a/arch/x86/pci/amd_bus.c
+++ b/arch/x86/pci/amd_bus.c
@@ -44,15 +44,6 @@
return NULL;
}
-static void __init set_mp_bus_range_to_node(int min_bus, int max_bus, int node)
-{
-#ifdef CONFIG_NUMA
- int j;
-
- for (j = min_bus; j <= max_bus; j++)
- set_mp_bus_to_node(j, node);
-#endif
-}
/**
* early_fill_mp_bus_to_node()
* called before pcibios_scan_root and pci_scan_bus
@@ -117,7 +108,6 @@
min_bus = (reg >> 16) & 0xff;
max_bus = (reg >> 24) & 0xff;
node = (reg >> 4) & 0x07;
- set_mp_bus_range_to_node(min_bus, max_bus, node);
link = (reg >> 8) & 0x03;
info = alloc_pci_root_info(min_bus, max_bus, node, link);
diff --git a/arch/x86/pci/bus_numa.c b/arch/x86/pci/bus_numa.c
index c2735fe..f3a2cfc 100644
--- a/arch/x86/pci/bus_numa.c
+++ b/arch/x86/pci/bus_numa.c
@@ -10,9 +10,6 @@
{
struct pci_root_info *info;
- if (list_empty(&pci_root_infos))
- return NULL;
-
list_for_each_entry(info, &pci_root_infos, list)
if (info->busn.start == bus)
return info;
@@ -20,6 +17,16 @@
return NULL;
}
+int x86_pci_root_bus_node(int bus)
+{
+ struct pci_root_info *info = x86_find_pci_root_info(bus);
+
+ if (!info)
+ return NUMA_NO_NODE;
+
+ return info->node;
+}
+
void x86_pci_root_bus_resources(int bus, struct list_head *resources)
{
struct pci_root_info *info = x86_find_pci_root_info(bus);
diff --git a/arch/x86/pci/common.c b/arch/x86/pci/common.c
index 981c2db..d491ded 100644
--- a/arch/x86/pci/common.c
+++ b/arch/x86/pci/common.c
@@ -456,19 +456,25 @@
dmi_check_system(pciprobe_dmi_table);
}
-struct pci_bus *pcibios_scan_root(int busnum)
+void pcibios_scan_root(int busnum)
{
- struct pci_bus *bus = NULL;
+ struct pci_bus *bus;
+ struct pci_sysdata *sd;
+ LIST_HEAD(resources);
- while ((bus = pci_find_next_bus(bus)) != NULL) {
- if (bus->number == busnum) {
- /* Already scanned */
- return bus;
- }
+ sd = kzalloc(sizeof(*sd), GFP_KERNEL);
+ if (!sd) {
+ printk(KERN_ERR "PCI: OOM, skipping PCI bus %02x\n", busnum);
+ return;
}
-
- return pci_scan_bus_on_node(busnum, &pci_root_ops,
- get_mp_bus_to_node(busnum));
+ sd->node = x86_pci_root_bus_node(busnum);
+ x86_pci_root_bus_resources(busnum, &resources);
+ printk(KERN_DEBUG "PCI: Probing PCI hardware (bus %02x)\n", busnum);
+ bus = pci_scan_root_bus(NULL, busnum, &pci_root_ops, sd, &resources);
+ if (!bus) {
+ pci_free_resource_list(&resources);
+ kfree(sd);
+ }
}
void __init pcibios_set_cache_line_size(void)
@@ -677,105 +683,3 @@
else
return 0;
}
-
-struct pci_bus *pci_scan_bus_on_node(int busno, struct pci_ops *ops, int node)
-{
- LIST_HEAD(resources);
- struct pci_bus *bus = NULL;
- struct pci_sysdata *sd;
-
- /*
- * Allocate per-root-bus (not per bus) arch-specific data.
- * TODO: leak; this memory is never freed.
- * It's arguable whether it's worth the trouble to care.
- */
- sd = kzalloc(sizeof(*sd), GFP_KERNEL);
- if (!sd) {
- printk(KERN_ERR "PCI: OOM, skipping PCI bus %02x\n", busno);
- return NULL;
- }
- sd->node = node;
- x86_pci_root_bus_resources(busno, &resources);
- printk(KERN_DEBUG "PCI: Probing PCI hardware (bus %02x)\n", busno);
- bus = pci_scan_root_bus(NULL, busno, ops, sd, &resources);
- if (!bus) {
- pci_free_resource_list(&resources);
- kfree(sd);
- }
-
- return bus;
-}
-
-struct pci_bus *pci_scan_bus_with_sysdata(int busno)
-{
- return pci_scan_bus_on_node(busno, &pci_root_ops, -1);
-}
-
-/*
- * NUMA info for PCI busses
- *
- * Early arch code is responsible for filling in reasonable values here.
- * A node id of "-1" means "use current node". In other words, if a bus
- * has a -1 node id, it's not tightly coupled to any particular chunk
- * of memory (as is the case on some Nehalem systems).
- */
-#ifdef CONFIG_NUMA
-
-#define BUS_NR 256
-
-#ifdef CONFIG_X86_64
-
-static int mp_bus_to_node[BUS_NR] = {
- [0 ... BUS_NR - 1] = -1
-};
-
-void set_mp_bus_to_node(int busnum, int node)
-{
- if (busnum >= 0 && busnum < BUS_NR)
- mp_bus_to_node[busnum] = node;
-}
-
-int get_mp_bus_to_node(int busnum)
-{
- int node = -1;
-
- if (busnum < 0 || busnum > (BUS_NR - 1))
- return node;
-
- node = mp_bus_to_node[busnum];
-
- /*
- * let numa_node_id to decide it later in dma_alloc_pages
- * if there is no ram on that node
- */
- if (node != -1 && !node_online(node))
- node = -1;
-
- return node;
-}
-
-#else /* CONFIG_X86_32 */
-
-static int mp_bus_to_node[BUS_NR] = {
- [0 ... BUS_NR - 1] = -1
-};
-
-void set_mp_bus_to_node(int busnum, int node)
-{
- if (busnum >= 0 && busnum < BUS_NR)
- mp_bus_to_node[busnum] = (unsigned char) node;
-}
-
-int get_mp_bus_to_node(int busnum)
-{
- int node;
-
- if (busnum < 0 || busnum > (BUS_NR - 1))
- return 0;
- node = mp_bus_to_node[busnum];
- return node;
-}
-
-#endif /* CONFIG_X86_32 */
-
-#endif /* CONFIG_NUMA */
diff --git a/arch/x86/pci/fixup.c b/arch/x86/pci/fixup.c
index bca9e85..94ae9ae 100644
--- a/arch/x86/pci/fixup.c
+++ b/arch/x86/pci/fixup.c
@@ -25,9 +25,9 @@
dev_dbg(&d->dev, "i450NX PXB %d: %02x/%02x/%02x\n", pxb, busno,
suba, subb);
if (busno)
- pci_scan_bus_with_sysdata(busno); /* Bus A */
+ pcibios_scan_root(busno); /* Bus A */
if (suba < subb)
- pci_scan_bus_with_sysdata(suba+1); /* Bus B */
+ pcibios_scan_root(suba+1); /* Bus B */
}
pcibios_last_bus = -1;
}
@@ -42,7 +42,7 @@
u8 busno;
pci_read_config_byte(d, 0x4a, &busno);
dev_info(&d->dev, "i440KX/GX host bridge; secondary bus %02x\n", busno);
- pci_scan_bus_with_sysdata(busno);
+ pcibios_scan_root(busno);
pcibios_last_bus = -1;
}
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82454GX, pci_fixup_i450gx);
@@ -313,9 +313,10 @@
* IORESOURCE_ROM_SHADOW is used to associate the boot video
* card with this copy. On laptops this copy has to be used since
* the main ROM may be compressed or combined with another image.
- * See pci_map_rom() for use of this flag. IORESOURCE_ROM_SHADOW
- * is marked here since the boot video device will be the only enabled
- * video device at this point.
+ * See pci_map_rom() for use of this flag. Before marking the device
+ * with IORESOURCE_ROM_SHADOW check if a vga_default_device is already set
+ * by either arch cde or vga-arbitration, if so only apply the fixup to this
+ * already determined primary video card.
*/
static void pci_fixup_video(struct pci_dev *pdev)
@@ -346,12 +347,13 @@
}
bus = bus->parent;
}
- pci_read_config_word(pdev, PCI_COMMAND, &config);
- if (config & (PCI_COMMAND_IO | PCI_COMMAND_MEMORY)) {
- pdev->resource[PCI_ROM_RESOURCE].flags |= IORESOURCE_ROM_SHADOW;
- dev_printk(KERN_DEBUG, &pdev->dev, "Boot video device\n");
- if (!vga_default_device())
+ if (!vga_default_device() || pdev == vga_default_device()) {
+ pci_read_config_word(pdev, PCI_COMMAND, &config);
+ if (config & (PCI_COMMAND_IO | PCI_COMMAND_MEMORY)) {
+ pdev->resource[PCI_ROM_RESOURCE].flags |= IORESOURCE_ROM_SHADOW;
+ dev_printk(KERN_DEBUG, &pdev->dev, "Boot video device\n");
vga_set_default_device(pdev);
+ }
}
}
DECLARE_PCI_FIXUP_CLASS_FINAL(PCI_ANY_ID, PCI_ANY_ID,
diff --git a/arch/x86/pci/irq.c b/arch/x86/pci/irq.c
index 372e9b8..84112f5 100644
--- a/arch/x86/pci/irq.c
+++ b/arch/x86/pci/irq.c
@@ -136,13 +136,9 @@
busmap[e->bus] = 1;
}
for (i = 1; i < 256; i++) {
- int node;
if (!busmap[i] || pci_find_bus(0, i))
continue;
- node = get_mp_bus_to_node(i);
- if (pci_scan_bus_on_node(i, &pci_root_ops, node))
- printk(KERN_INFO "PCI: Discovered primary peer "
- "bus %02x [IRQ]\n", i);
+ pcibios_scan_root(i);
}
pcibios_last_bus = -1;
}
diff --git a/arch/x86/pci/legacy.c b/arch/x86/pci/legacy.c
index 4db96fb..5b662c0 100644
--- a/arch/x86/pci/legacy.c
+++ b/arch/x86/pci/legacy.c
@@ -37,19 +37,17 @@
void pcibios_scan_specific_bus(int busn)
{
int devfn;
- long node;
u32 l;
if (pci_find_bus(0, busn))
return;
- node = get_mp_bus_to_node(busn);
for (devfn = 0; devfn < 256; devfn += 8) {
if (!raw_pci_read(0, busn, devfn, PCI_VENDOR_ID, 2, &l) &&
l != 0x0000 && l != 0xffff) {
DBG("Found device at %02x:%02x [%04x]\n", busn, devfn, l);
printk(KERN_INFO "PCI: Discovered peer bus %02x\n", busn);
- pci_scan_bus_on_node(busn, &pci_root_ops, node);
+ pcibios_scan_root(busn);
return;
}
}
diff --git a/arch/x86/pci/numaq_32.c b/arch/x86/pci/numaq_32.c
index 72c229f..080eb03 100644
--- a/arch/x86/pci/numaq_32.c
+++ b/arch/x86/pci/numaq_32.c
@@ -135,11 +135,11 @@
pxb, busno, suba, subb);
if (busno) {
/* Bus A */
- pci_scan_bus_with_sysdata(QUADLOCAL2BUS(quad, busno));
+ pcibios_scan_root(QUADLOCAL2BUS(quad, busno));
}
if (suba < subb) {
/* Bus B */
- pci_scan_bus_with_sysdata(QUADLOCAL2BUS(quad, suba+1));
+ pcibios_scan_root(QUADLOCAL2BUS(quad, suba+1));
}
}
pcibios_last_bus = -1;
@@ -159,7 +159,7 @@
continue;
printk("Scanning PCI bus %d for quad %d\n",
QUADLOCAL2BUS(quad,0), quad);
- pci_scan_bus_with_sysdata(QUADLOCAL2BUS(quad, 0));
+ pcibios_scan_root(QUADLOCAL2BUS(quad, 0));
}
return 0;
}
diff --git a/arch/x86/pci/visws.c b/arch/x86/pci/visws.c
index 3e6d2a6..cd9d4d1 100644
--- a/arch/x86/pci/visws.c
+++ b/arch/x86/pci/visws.c
@@ -78,8 +78,8 @@
"bridge B (PIIX4) bus: %u\n", pci_bus1, pci_bus0);
raw_pci_ops = &pci_direct_conf1;
- pci_scan_bus_with_sysdata(pci_bus0);
- pci_scan_bus_with_sysdata(pci_bus1);
+ pcibios_scan_root(pci_bus0);
+ pcibios_scan_root(pci_bus1);
pci_fixup_irqs(pci_common_swizzle, visws_map_irq);
pcibios_resource_survey();
/* Request bus scan */
diff --git a/drivers/acpi/numa.c b/drivers/acpi/numa.c
index 9e6816e..24b5476 100644
--- a/drivers/acpi/numa.c
+++ b/drivers/acpi/numa.c
@@ -60,7 +60,7 @@
return node_to_pxm_map[node];
}
-void __acpi_map_pxm_to_node(int pxm, int node)
+static void __acpi_map_pxm_to_node(int pxm, int node)
{
if (pxm_to_node_map[pxm] == NUMA_NO_NODE || node < pxm_to_node_map[pxm])
pxm_to_node_map[pxm] = node;
@@ -193,7 +193,7 @@
return 0;
}
-void __init __attribute__ ((weak))
+void __init __weak
acpi_numa_x2apic_affinity_init(struct acpi_srat_x2apic_cpu_affinity *pa)
{
printk(KERN_WARNING PREFIX
@@ -314,7 +314,7 @@
return 0;
}
-int acpi_get_pxm(acpi_handle h)
+static int acpi_get_pxm(acpi_handle h)
{
unsigned long long pxm;
acpi_status status;
@@ -331,14 +331,14 @@
return -1;
}
-int acpi_get_node(acpi_handle *handle)
+int acpi_get_node(acpi_handle handle)
{
- int pxm, node = NUMA_NO_NODE;
+ int pxm;
pxm = acpi_get_pxm(handle);
- if (pxm >= 0 && pxm < MAX_PXM_DOMAINS)
- node = acpi_map_pxm_to_node(pxm);
+ if (pxm < 0 || pxm >= MAX_PXM_DOMAINS)
+ return NUMA_NO_NODE;
- return node;
+ return acpi_map_pxm_to_node(pxm);
}
EXPORT_SYMBOL(acpi_get_node);
diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index dc2756f..0237109 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -1151,13 +1151,13 @@
static int ahci_init_interrupts(struct pci_dev *pdev, unsigned int n_ports,
struct ahci_host_priv *hpriv)
{
- int rc, nvec;
+ int nvec;
if (hpriv->flags & AHCI_HFLAG_NO_MSI)
goto intx;
- rc = pci_msi_vec_count(pdev);
- if (rc < 0)
+ nvec = pci_msi_vec_count(pdev);
+ if (nvec < 0)
goto intx;
/*
@@ -1165,19 +1165,19 @@
* Message mode could be enforced. In this case assume that advantage
* of multipe MSIs is negated and use single MSI mode instead.
*/
- if (rc < n_ports)
+ if (nvec < n_ports)
goto single_msi;
- nvec = rc;
- rc = pci_enable_msi_block(pdev, nvec);
- if (rc)
+ nvec = pci_enable_msi_range(pdev, nvec, nvec);
+ if (nvec == -ENOSPC)
+ goto single_msi;
+ else if (nvec < 0)
goto intx;
return nvec;
single_msi:
- rc = pci_enable_msi(pdev);
- if (rc)
+ if (pci_enable_msi(pdev))
goto intx;
return 1;
diff --git a/drivers/bus/mvebu-mbus.c b/drivers/bus/mvebu-mbus.c
index 725c461..2ac754e 100644
--- a/drivers/bus/mvebu-mbus.c
+++ b/drivers/bus/mvebu-mbus.c
@@ -870,14 +870,14 @@
ret = of_property_read_u32_array(np, "pcie-mem-aperture", reg, ARRAY_SIZE(reg));
if (!ret) {
mem->start = reg[0];
- mem->end = mem->start + reg[1];
+ mem->end = mem->start + reg[1] - 1;
mem->flags = IORESOURCE_MEM;
}
ret = of_property_read_u32_array(np, "pcie-io-aperture", reg, ARRAY_SIZE(reg));
if (!ret) {
io->start = reg[0];
- io->end = io->start + reg[1];
+ io->end = io->start + reg[1] - 1;
io->flags = IORESOURCE_IO;
}
}
diff --git a/drivers/gpu/drm/drm_fops.c b/drivers/gpu/drm/drm_fops.c
index 7f2af9a..309023f 100644
--- a/drivers/gpu/drm/drm_fops.c
+++ b/drivers/gpu/drm/drm_fops.c
@@ -319,7 +319,8 @@
pci_dev_put(pci_dev);
}
if (!dev->hose) {
- struct pci_bus *b = pci_bus_b(pci_root_buses.next);
+ struct pci_bus *b = list_entry(pci_root_buses.next,
+ struct pci_bus, node);
if (b)
dev->hose = b->sysdata;
}
diff --git a/drivers/pci/Makefile b/drivers/pci/Makefile
index 17d2b07..e2501ac 100644
--- a/drivers/pci/Makefile
+++ b/drivers/pci/Makefile
@@ -33,21 +33,15 @@
#
# Some architectures use the generic PCI setup functions
#
-obj-$(CONFIG_X86) += setup-bus.o
-obj-$(CONFIG_ALPHA) += setup-bus.o setup-irq.o
-obj-$(CONFIG_ARM) += setup-bus.o setup-irq.o
-obj-$(CONFIG_UNICORE32) += setup-bus.o setup-irq.o
-obj-$(CONFIG_PARISC) += setup-bus.o
-obj-$(CONFIG_SUPERH) += setup-bus.o setup-irq.o
-obj-$(CONFIG_PPC) += setup-bus.o
-obj-$(CONFIG_FRV) += setup-bus.o
-obj-$(CONFIG_MIPS) += setup-bus.o setup-irq.o
+obj-$(CONFIG_ALPHA) += setup-irq.o
+obj-$(CONFIG_ARM) += setup-irq.o
+obj-$(CONFIG_UNICORE32) += setup-irq.o
+obj-$(CONFIG_SUPERH) += setup-irq.o
+obj-$(CONFIG_MIPS) += setup-irq.o
obj-$(CONFIG_X86_VISWS) += setup-irq.o
-obj-$(CONFIG_MN10300) += setup-bus.o
-obj-$(CONFIG_MICROBLAZE) += setup-bus.o
-obj-$(CONFIG_TILE) += setup-bus.o setup-irq.o
-obj-$(CONFIG_SPARC_LEON) += setup-bus.o setup-irq.o
-obj-$(CONFIG_M68K) += setup-bus.o setup-irq.o
+obj-$(CONFIG_TILE) += setup-irq.o
+obj-$(CONFIG_SPARC_LEON) += setup-irq.o
+obj-$(CONFIG_M68K) += setup-irq.o
#
# ACPI Related PCI FW Functions
diff --git a/drivers/pci/host/pci-mvebu.c b/drivers/pci/host/pci-mvebu.c
index 13478ec..d3d1cfd 100644
--- a/drivers/pci/host/pci-mvebu.c
+++ b/drivers/pci/host/pci-mvebu.c
@@ -60,14 +60,6 @@
#define PCIE_DEBUG_CTRL 0x1a60
#define PCIE_DEBUG_SOFT_RESET BIT(20)
-/*
- * This product ID is registered by Marvell, and used when the Marvell
- * SoC is not the root complex, but an endpoint on the PCIe bus. It is
- * therefore safe to re-use this PCI ID for our emulated PCI-to-PCI
- * bridge.
- */
-#define MARVELL_EMULATED_PCI_PCI_BRIDGE_ID 0x7846
-
/* PCI configuration space of a PCI-to-PCI bridge */
struct mvebu_sw_pci_bridge {
u16 vendor;
@@ -109,7 +101,9 @@
struct mvebu_pcie_port *ports;
struct msi_chip *msi;
struct resource io;
+ char io_name[30];
struct resource realio;
+ char mem_name[30];
struct resource mem;
struct resource busn;
int nports;
@@ -388,7 +382,8 @@
bridge->class = PCI_CLASS_BRIDGE_PCI;
bridge->vendor = PCI_VENDOR_ID_MARVELL;
- bridge->device = MARVELL_EMULATED_PCI_PCI_BRIDGE_ID;
+ bridge->device = mvebu_readl(port, PCIE_DEV_ID_OFF) >> 16;
+ bridge->revision = mvebu_readl(port, PCIE_DEV_REV_OFF) & 0xff;
bridge->header_type = PCI_HEADER_TYPE_BRIDGE;
bridge->cache_line_size = 0x10;
@@ -679,10 +674,30 @@
{
struct mvebu_pcie *pcie = sys_to_pcie(sys);
int i;
+ int domain = 0;
- if (resource_size(&pcie->realio) != 0)
+#ifdef CONFIG_PCI_DOMAINS
+ domain = sys->domain;
+#endif
+
+ snprintf(pcie->mem_name, sizeof(pcie->mem_name), "PCI MEM %04x",
+ domain);
+ pcie->mem.name = pcie->mem_name;
+
+ snprintf(pcie->io_name, sizeof(pcie->io_name), "PCI I/O %04x", domain);
+ pcie->realio.name = pcie->io_name;
+
+ if (request_resource(&iomem_resource, &pcie->mem))
+ return 0;
+
+ if (resource_size(&pcie->realio) != 0) {
+ if (request_resource(&ioport_resource, &pcie->realio)) {
+ release_resource(&pcie->mem);
+ return 0;
+ }
pci_add_resource_offset(&sys->resources, &pcie->realio,
sys->io_offset);
+ }
pci_add_resource_offset(&sys->resources, &pcie->mem, sys->mem_offset);
pci_add_resource(&sys->resources, &pcie->busn);
@@ -804,7 +819,7 @@
for (i = 0; i < nranges; i++) {
u32 flags = of_read_number(range, 1);
- u32 slot = of_read_number(range, 2);
+ u32 slot = of_read_number(range + 1, 1);
u64 cpuaddr = of_read_number(range + na, pna);
unsigned long rtype;
diff --git a/drivers/pci/hotplug/acpiphp_glue.c b/drivers/pci/hotplug/acpiphp_glue.c
index cd929ae..aee6a0a 100644
--- a/drivers/pci/hotplug/acpiphp_glue.c
+++ b/drivers/pci/hotplug/acpiphp_glue.c
@@ -450,7 +450,7 @@
*/
static unsigned char acpiphp_max_busnr(struct pci_bus *bus)
{
- struct list_head *tmp;
+ struct pci_bus *tmp;
unsigned char max, n;
/*
@@ -463,8 +463,8 @@
*/
max = bus->busn_res.start;
- list_for_each(tmp, &bus->children) {
- n = pci_bus_max_busnr(pci_bus_b(tmp));
+ list_for_each_entry(tmp, &bus->children, node) {
+ n = pci_bus_max_busnr(tmp);
if (n > max)
max = n;
}
diff --git a/drivers/pci/hotplug/cpqphp_core.c b/drivers/pci/hotplug/cpqphp_core.c
index 31273e1..037e261 100644
--- a/drivers/pci/hotplug/cpqphp_core.c
+++ b/drivers/pci/hotplug/cpqphp_core.c
@@ -920,12 +920,12 @@
bus->max_bus_speed = PCI_SPEED_100MHz_PCIX;
break;
}
- if (bus_cap & 20) {
+ if (bus_cap & 0x20) {
dbg("bus max supports 66MHz PCI-X\n");
bus->max_bus_speed = PCI_SPEED_66MHz_PCIX;
break;
}
- if (bus_cap & 10) {
+ if (bus_cap & 0x10) {
dbg("bus max supports 66MHz PCI\n");
bus->max_bus_speed = PCI_SPEED_66MHz;
break;
diff --git a/drivers/pci/msi.c b/drivers/pci/msi.c
index 7a0fec6..955ab79 100644
--- a/drivers/pci/msi.c
+++ b/drivers/pci/msi.c
@@ -545,9 +545,15 @@
return -ENOMEM;
list_for_each_entry(entry, &pdev->msi_list, list) {
char *name = kmalloc(20, GFP_KERNEL);
- msi_dev_attr = kzalloc(sizeof(*msi_dev_attr), GFP_KERNEL);
- if (!msi_dev_attr)
+ if (!name)
goto error_attrs;
+
+ msi_dev_attr = kzalloc(sizeof(*msi_dev_attr), GFP_KERNEL);
+ if (!msi_dev_attr) {
+ kfree(name);
+ goto error_attrs;
+ }
+
sprintf(name, "%d", entry->irq);
sysfs_attr_init(&msi_dev_attr->attr);
msi_dev_attr->attr.name = name;
@@ -589,6 +595,7 @@
++count;
msi_attr = msi_attrs[count];
}
+ kfree(msi_attrs);
return ret;
}
@@ -959,7 +966,6 @@
/**
* pci_msix_vec_count - return the number of device's MSI-X table entries
* @dev: pointer to the pci_dev data structure of MSI-X device function
-
* This function returns the number of device's MSI-X table entries and
* therefore the number of MSI-X vectors device is capable of sending.
* It returns a negative errno if the device is not capable of sending MSI-X
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index 1febe90..b6ddde1 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -108,12 +108,12 @@
*/
unsigned char pci_bus_max_busnr(struct pci_bus* bus)
{
- struct list_head *tmp;
+ struct pci_bus *tmp;
unsigned char max, n;
max = bus->busn_res.end;
- list_for_each(tmp, &bus->children) {
- n = pci_bus_max_busnr(pci_bus_b(tmp));
+ list_for_each_entry(tmp, &bus->children, node) {
+ n = pci_bus_max_busnr(tmp);
if(n > max)
max = n;
}
@@ -1181,6 +1181,8 @@
static int do_pci_enable_device(struct pci_dev *dev, int bars)
{
int err;
+ u16 cmd;
+ u8 pin;
err = pci_set_power_state(dev, PCI_D0);
if (err < 0 && err != -EIO)
@@ -1190,6 +1192,14 @@
return err;
pci_fixup_device(pci_fixup_enable, dev);
+ pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &pin);
+ if (pin) {
+ pci_read_config_word(dev, PCI_COMMAND, &cmd);
+ if (cmd & PCI_COMMAND_INTX_DISABLE)
+ pci_write_config_word(dev, PCI_COMMAND,
+ cmd & ~PCI_COMMAND_INTX_DISABLE);
+ }
+
return 0;
}
@@ -1611,29 +1621,27 @@
struct pci_pme_device *pme_dev, *n;
mutex_lock(&pci_pme_list_mutex);
- if (!list_empty(&pci_pme_list)) {
- list_for_each_entry_safe(pme_dev, n, &pci_pme_list, list) {
- if (pme_dev->dev->pme_poll) {
- struct pci_dev *bridge;
+ list_for_each_entry_safe(pme_dev, n, &pci_pme_list, list) {
+ if (pme_dev->dev->pme_poll) {
+ struct pci_dev *bridge;
- bridge = pme_dev->dev->bus->self;
- /*
- * If bridge is in low power state, the
- * configuration space of subordinate devices
- * may be not accessible
- */
- if (bridge && bridge->current_state != PCI_D0)
- continue;
- pci_pme_wakeup(pme_dev->dev, NULL);
- } else {
- list_del(&pme_dev->list);
- kfree(pme_dev);
- }
+ bridge = pme_dev->dev->bus->self;
+ /*
+ * If bridge is in low power state, the
+ * configuration space of subordinate devices
+ * may be not accessible
+ */
+ if (bridge && bridge->current_state != PCI_D0)
+ continue;
+ pci_pme_wakeup(pme_dev->dev, NULL);
+ } else {
+ list_del(&pme_dev->list);
+ kfree(pme_dev);
}
- if (!list_empty(&pci_pme_list))
- schedule_delayed_work(&pci_pme_work,
- msecs_to_jiffies(PME_TIMEOUT));
}
+ if (!list_empty(&pci_pme_list))
+ schedule_delayed_work(&pci_pme_work,
+ msecs_to_jiffies(PME_TIMEOUT));
mutex_unlock(&pci_pme_list_mutex);
}
@@ -2180,21 +2188,18 @@
}
/**
- * pci_enable_acs - enable ACS if hardware support it
+ * pci_std_enable_acs - enable ACS on devices using standard ACS capabilites
* @dev: the PCI device
*/
-void pci_enable_acs(struct pci_dev *dev)
+static int pci_std_enable_acs(struct pci_dev *dev)
{
int pos;
u16 cap;
u16 ctrl;
- if (!pci_acs_enable)
- return;
-
pos = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_ACS);
if (!pos)
- return;
+ return -ENODEV;
pci_read_config_word(dev, pos + PCI_ACS_CAP, &cap);
pci_read_config_word(dev, pos + PCI_ACS_CTRL, &ctrl);
@@ -2212,6 +2217,23 @@
ctrl |= (cap & PCI_ACS_UF);
pci_write_config_word(dev, pos + PCI_ACS_CTRL, ctrl);
+
+ return 0;
+}
+
+/**
+ * pci_enable_acs - enable ACS if hardware support it
+ * @dev: the PCI device
+ */
+void pci_enable_acs(struct pci_dev *dev)
+{
+ if (!pci_acs_enable)
+ return;
+
+ if (!pci_std_enable_acs(dev))
+ return;
+
+ pci_dev_specific_enable_acs(dev);
}
static bool pci_acs_flags_enabled(struct pci_dev *pdev, u16 acs_flags)
diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
index 6e34498..5094943 100644
--- a/drivers/pci/probe.c
+++ b/drivers/pci/probe.c
@@ -731,22 +731,6 @@
return child;
}
-static void pci_fixup_parent_subordinate_busnr(struct pci_bus *child, int max)
-{
- struct pci_bus *parent = child->parent;
-
- /* Attempts to fix that up are really dangerous unless
- we're going to re-assign all bus numbers. */
- if (!pcibios_assign_all_busses())
- return;
-
- while (parent->parent && parent->busn_res.end < max) {
- parent->busn_res.end = max;
- pci_write_config_byte(parent->self, PCI_SUBORDINATE_BUS, max);
- parent = parent->parent;
- }
-}
-
/*
* If it's a bridge, configure it and scan the bus behind it.
* For CardBus bridges, we don't scan behind as the devices will
@@ -782,7 +766,7 @@
/* Check if setup is sensible at all */
if (!pass &&
(primary != bus->number || secondary <= bus->number ||
- secondary > subordinate)) {
+ secondary > subordinate || subordinate > bus->busn_res.end)) {
dev_info(&dev->dev, "bridge configuration invalid ([bus %02x-%02x]), reconfiguring\n",
secondary, subordinate);
broken = 1;
@@ -805,11 +789,10 @@
goto out;
/*
- * If we already got to this bus through a different bridge,
- * don't re-add it. This can happen with the i450NX chipset.
- *
- * However, we continue to descend down the hierarchy and
- * scan remaining child buses.
+ * The bus might already exist for two reasons: Either we are
+ * rescanning the bus or the bus is reachable through more than
+ * one bridge. The second case can happen with the i450NX
+ * chipset.
*/
child = pci_find_bus(pci_domain_nr(bus), secondary);
if (!child) {
@@ -822,17 +805,19 @@
}
cmax = pci_scan_child_bus(child);
- if (cmax > max)
- max = cmax;
- if (child->busn_res.end > max)
- max = child->busn_res.end;
+ if (cmax > subordinate)
+ dev_warn(&dev->dev, "bridge has subordinate %02x but max busn %02x\n",
+ subordinate, cmax);
+ /* subordinate should equal child->busn_res.end */
+ if (subordinate > max)
+ max = subordinate;
} else {
/*
* We need to assign a number to this bus which we always
* do in the second pass.
*/
if (!pass) {
- if (pcibios_assign_all_busses() || broken)
+ if (pcibios_assign_all_busses() || broken || is_cardbus)
/* Temporarily disable forwarding of the
configuration cycles on all bridges in
this bus segment to avoid possible
@@ -844,19 +829,25 @@
goto out;
}
+ if (max >= bus->busn_res.end) {
+ dev_warn(&dev->dev, "can't allocate child bus %02x from %pR\n",
+ max, &bus->busn_res);
+ goto out;
+ }
+
/* Clear errors */
pci_write_config_word(dev, PCI_STATUS, 0xffff);
- /* Prevent assigning a bus number that already exists.
- * This can happen when a bridge is hot-plugged, so in
- * this case we only re-scan this bus. */
+ /* The bus will already exist if we are rescanning */
child = pci_find_bus(pci_domain_nr(bus), max+1);
if (!child) {
- child = pci_add_new_bus(bus, dev, ++max);
+ child = pci_add_new_bus(bus, dev, max+1);
if (!child)
goto out;
- pci_bus_insert_busn_res(child, max, 0xff);
+ pci_bus_insert_busn_res(child, max+1,
+ bus->busn_res.end);
}
+ max++;
buses = (buses & 0xff000000)
| ((unsigned int)(child->primary) << 0)
| ((unsigned int)(child->busn_res.start) << 8)
@@ -878,20 +869,7 @@
if (!is_cardbus) {
child->bridge_ctl = bctl;
- /*
- * Adjust subordinate busnr in parent buses.
- * We do this before scanning for children because
- * some devices may not be detected if the bios
- * was lazy.
- */
- pci_fixup_parent_subordinate_busnr(child, max);
- /* Now we can scan all subordinate buses... */
max = pci_scan_child_bus(child);
- /*
- * now fix it up again since we have found
- * the real value of max.
- */
- pci_fixup_parent_subordinate_busnr(child, max);
} else {
/*
* For CardBus bridges, we leave 4 bus numbers
@@ -922,11 +900,15 @@
}
}
max += i;
- pci_fixup_parent_subordinate_busnr(child, max);
}
/*
* Set the subordinate bus number to its real value.
*/
+ if (max > bus->busn_res.end) {
+ dev_warn(&dev->dev, "max busn %02x is outside %pR\n",
+ max, &bus->busn_res);
+ max = bus->busn_res.end;
+ }
pci_bus_update_busn_res_end(child, max);
pci_write_config_byte(dev, PCI_SUBORDINATE_BUS, max);
}
@@ -1835,7 +1817,7 @@
res->flags |= IORESOURCE_PCI_FIXED;
}
- conflict = insert_resource_conflict(parent_res, res);
+ conflict = request_resource_conflict(parent_res, res);
if (conflict)
dev_printk(KERN_DEBUG, &b->dev,
diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index 5cb726c..ed2ed86 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -3423,6 +3423,61 @@
#endif
}
+/*
+ * Many Intel PCH root ports do provide ACS-like features to disable peer
+ * transactions and validate bus numbers in requests, but do not provide an
+ * actual PCIe ACS capability. This is the list of device IDs known to fall
+ * into that category as provided by Intel in Red Hat bugzilla 1037684.
+ */
+static const u16 pci_quirk_intel_pch_acs_ids[] = {
+ /* Ibexpeak PCH */
+ 0x3b42, 0x3b43, 0x3b44, 0x3b45, 0x3b46, 0x3b47, 0x3b48, 0x3b49,
+ 0x3b4a, 0x3b4b, 0x3b4c, 0x3b4d, 0x3b4e, 0x3b4f, 0x3b50, 0x3b51,
+ /* Cougarpoint PCH */
+ 0x1c10, 0x1c11, 0x1c12, 0x1c13, 0x1c14, 0x1c15, 0x1c16, 0x1c17,
+ 0x1c18, 0x1c19, 0x1c1a, 0x1c1b, 0x1c1c, 0x1c1d, 0x1c1e, 0x1c1f,
+ /* Pantherpoint PCH */
+ 0x1e10, 0x1e11, 0x1e12, 0x1e13, 0x1e14, 0x1e15, 0x1e16, 0x1e17,
+ 0x1e18, 0x1e19, 0x1e1a, 0x1e1b, 0x1e1c, 0x1e1d, 0x1e1e, 0x1e1f,
+ /* Lynxpoint-H PCH */
+ 0x8c10, 0x8c11, 0x8c12, 0x8c13, 0x8c14, 0x8c15, 0x8c16, 0x8c17,
+ 0x8c18, 0x8c19, 0x8c1a, 0x8c1b, 0x8c1c, 0x8c1d, 0x8c1e, 0x8c1f,
+ /* Lynxpoint-LP PCH */
+ 0x9c10, 0x9c11, 0x9c12, 0x9c13, 0x9c14, 0x9c15, 0x9c16, 0x9c17,
+ 0x9c18, 0x9c19, 0x9c1a, 0x9c1b,
+ /* Wildcat PCH */
+ 0x9c90, 0x9c91, 0x9c92, 0x9c93, 0x9c94, 0x9c95, 0x9c96, 0x9c97,
+ 0x9c98, 0x9c99, 0x9c9a, 0x9c9b,
+};
+
+static bool pci_quirk_intel_pch_acs_match(struct pci_dev *dev)
+{
+ int i;
+
+ /* Filter out a few obvious non-matches first */
+ if (!pci_is_pcie(dev) || pci_pcie_type(dev) != PCI_EXP_TYPE_ROOT_PORT)
+ return false;
+
+ for (i = 0; i < ARRAY_SIZE(pci_quirk_intel_pch_acs_ids); i++)
+ if (pci_quirk_intel_pch_acs_ids[i] == dev->device)
+ return true;
+
+ return false;
+}
+
+#define INTEL_PCH_ACS_FLAGS (PCI_ACS_RR | PCI_ACS_CR | PCI_ACS_UF | PCI_ACS_SV)
+
+static int pci_quirk_intel_pch_acs(struct pci_dev *dev, u16 acs_flags)
+{
+ u16 flags = dev->dev_flags & PCI_DEV_FLAGS_ACS_ENABLED_QUIRK ?
+ INTEL_PCH_ACS_FLAGS : 0;
+
+ if (!pci_quirk_intel_pch_acs_match(dev))
+ return -ENOTTY;
+
+ return acs_flags & ~flags ? 0 : 1;
+}
+
static const struct pci_dev_acs_enabled {
u16 vendor;
u16 device;
@@ -3434,6 +3489,7 @@
{ PCI_VENDOR_ID_ATI, 0x439d, pci_quirk_amd_sb_acs },
{ PCI_VENDOR_ID_ATI, 0x4384, pci_quirk_amd_sb_acs },
{ PCI_VENDOR_ID_ATI, 0x4399, pci_quirk_amd_sb_acs },
+ { PCI_VENDOR_ID_INTEL, PCI_ANY_ID, pci_quirk_intel_pch_acs },
{ 0 }
};
@@ -3461,3 +3517,132 @@
return -ENOTTY;
}
+
+/* Config space offset of Root Complex Base Address register */
+#define INTEL_LPC_RCBA_REG 0xf0
+/* 31:14 RCBA address */
+#define INTEL_LPC_RCBA_MASK 0xffffc000
+/* RCBA Enable */
+#define INTEL_LPC_RCBA_ENABLE (1 << 0)
+
+/* Backbone Scratch Pad Register */
+#define INTEL_BSPR_REG 0x1104
+/* Backbone Peer Non-Posted Disable */
+#define INTEL_BSPR_REG_BPNPD (1 << 8)
+/* Backbone Peer Posted Disable */
+#define INTEL_BSPR_REG_BPPD (1 << 9)
+
+/* Upstream Peer Decode Configuration Register */
+#define INTEL_UPDCR_REG 0x1114
+/* 5:0 Peer Decode Enable bits */
+#define INTEL_UPDCR_REG_MASK 0x3f
+
+static int pci_quirk_enable_intel_lpc_acs(struct pci_dev *dev)
+{
+ u32 rcba, bspr, updcr;
+ void __iomem *rcba_mem;
+
+ /*
+ * Read the RCBA register from the LPC (D31:F0). PCH root ports
+ * are D28:F* and therefore get probed before LPC, thus we can't
+ * use pci_get_slot/pci_read_config_dword here.
+ */
+ pci_bus_read_config_dword(dev->bus, PCI_DEVFN(31, 0),
+ INTEL_LPC_RCBA_REG, &rcba);
+ if (!(rcba & INTEL_LPC_RCBA_ENABLE))
+ return -EINVAL;
+
+ rcba_mem = ioremap_nocache(rcba & INTEL_LPC_RCBA_MASK,
+ PAGE_ALIGN(INTEL_UPDCR_REG));
+ if (!rcba_mem)
+ return -ENOMEM;
+
+ /*
+ * The BSPR can disallow peer cycles, but it's set by soft strap and
+ * therefore read-only. If both posted and non-posted peer cycles are
+ * disallowed, we're ok. If either are allowed, then we need to use
+ * the UPDCR to disable peer decodes for each port. This provides the
+ * PCIe ACS equivalent of PCI_ACS_RR | PCI_ACS_CR | PCI_ACS_UF
+ */
+ bspr = readl(rcba_mem + INTEL_BSPR_REG);
+ bspr &= INTEL_BSPR_REG_BPNPD | INTEL_BSPR_REG_BPPD;
+ if (bspr != (INTEL_BSPR_REG_BPNPD | INTEL_BSPR_REG_BPPD)) {
+ updcr = readl(rcba_mem + INTEL_UPDCR_REG);
+ if (updcr & INTEL_UPDCR_REG_MASK) {
+ dev_info(&dev->dev, "Disabling UPDCR peer decodes\n");
+ updcr &= ~INTEL_UPDCR_REG_MASK;
+ writel(updcr, rcba_mem + INTEL_UPDCR_REG);
+ }
+ }
+
+ iounmap(rcba_mem);
+ return 0;
+}
+
+/* Miscellaneous Port Configuration register */
+#define INTEL_MPC_REG 0xd8
+/* MPC: Invalid Receive Bus Number Check Enable */
+#define INTEL_MPC_REG_IRBNCE (1 << 26)
+
+static void pci_quirk_enable_intel_rp_mpc_acs(struct pci_dev *dev)
+{
+ u32 mpc;
+
+ /*
+ * When enabled, the IRBNCE bit of the MPC register enables the
+ * equivalent of PCI ACS Source Validation (PCI_ACS_SV), which
+ * ensures that requester IDs fall within the bus number range
+ * of the bridge. Enable if not already.
+ */
+ pci_read_config_dword(dev, INTEL_MPC_REG, &mpc);
+ if (!(mpc & INTEL_MPC_REG_IRBNCE)) {
+ dev_info(&dev->dev, "Enabling MPC IRBNCE\n");
+ mpc |= INTEL_MPC_REG_IRBNCE;
+ pci_write_config_word(dev, INTEL_MPC_REG, mpc);
+ }
+}
+
+static int pci_quirk_enable_intel_pch_acs(struct pci_dev *dev)
+{
+ if (!pci_quirk_intel_pch_acs_match(dev))
+ return -ENOTTY;
+
+ if (pci_quirk_enable_intel_lpc_acs(dev)) {
+ dev_warn(&dev->dev, "Failed to enable Intel PCH ACS quirk\n");
+ return 0;
+ }
+
+ pci_quirk_enable_intel_rp_mpc_acs(dev);
+
+ dev->dev_flags |= PCI_DEV_FLAGS_ACS_ENABLED_QUIRK;
+
+ dev_info(&dev->dev, "Intel PCH root port ACS workaround enabled\n");
+
+ return 0;
+}
+
+static const struct pci_dev_enable_acs {
+ u16 vendor;
+ u16 device;
+ int (*enable_acs)(struct pci_dev *dev);
+} pci_dev_enable_acs[] = {
+ { PCI_VENDOR_ID_INTEL, PCI_ANY_ID, pci_quirk_enable_intel_pch_acs },
+ { 0 }
+};
+
+void pci_dev_specific_enable_acs(struct pci_dev *dev)
+{
+ const struct pci_dev_enable_acs *i;
+ int ret;
+
+ for (i = pci_dev_enable_acs; i->enable_acs; i++) {
+ if ((i->vendor == dev->vendor ||
+ i->vendor == (u16)PCI_ANY_ID) &&
+ (i->device == dev->device ||
+ i->device == (u16)PCI_ANY_ID)) {
+ ret = i->enable_acs(dev);
+ if (ret >= 0)
+ return;
+ }
+ }
+}
diff --git a/drivers/pci/search.c b/drivers/pci/search.c
index 3ff2ac7..4a1b972 100644
--- a/drivers/pci/search.c
+++ b/drivers/pci/search.c
@@ -54,14 +54,14 @@
static struct pci_bus *pci_do_find_bus(struct pci_bus *bus, unsigned char busnr)
{
- struct pci_bus* child;
- struct list_head *tmp;
+ struct pci_bus *child;
+ struct pci_bus *tmp;
if(bus->number == busnr)
return bus;
- list_for_each(tmp, &bus->children) {
- child = pci_do_find_bus(pci_bus_b(tmp), busnr);
+ list_for_each_entry(tmp, &bus->children, node) {
+ child = pci_do_find_bus(tmp, busnr);
if(child)
return child;
}
@@ -111,7 +111,7 @@
down_read(&pci_bus_sem);
n = from ? from->node.next : pci_root_buses.next;
if (n != &pci_root_buses)
- b = pci_bus_b(n);
+ b = list_entry(n, struct pci_bus, node);
up_read(&pci_bus_sem);
return b;
}
diff --git a/drivers/pcmcia/yenta_socket.c b/drivers/pcmcia/yenta_socket.c
index 8485761..946f90e 100644
--- a/drivers/pcmcia/yenta_socket.c
+++ b/drivers/pcmcia/yenta_socket.c
@@ -1076,7 +1076,7 @@
*/
static void yenta_fixup_parent_bridge(struct pci_bus *cardbus_bridge)
{
- struct list_head *tmp;
+ struct pci_bus *sibling;
unsigned char upper_limit;
/*
* We only check and fix the parent bridge: All systems which need
@@ -1095,18 +1095,18 @@
/* stay within the limits of the bus range of the parent: */
upper_limit = bridge_to_fix->parent->busn_res.end;
- /* check the bus ranges of all silbling bridges to prevent overlap */
- list_for_each(tmp, &bridge_to_fix->parent->children) {
- struct pci_bus *silbling = pci_bus_b(tmp);
+ /* check the bus ranges of all sibling bridges to prevent overlap */
+ list_for_each_entry(sibling, &bridge_to_fix->parent->children,
+ node) {
/*
- * If the silbling has a higher secondary bus number
+ * If the sibling has a higher secondary bus number
* and it's secondary is equal or smaller than our
* current upper limit, set the new upper limit to
- * the bus number below the silbling's range:
+ * the bus number below the sibling's range:
*/
- if (silbling->busn_res.start > bridge_to_fix->busn_res.end
- && silbling->busn_res.start <= upper_limit)
- upper_limit = silbling->busn_res.start - 1;
+ if (sibling->busn_res.start > bridge_to_fix->busn_res.end
+ && sibling->busn_res.start <= upper_limit)
+ upper_limit = sibling->busn_res.start - 1;
}
/* Show that the wanted subordinate number is not possible: */
diff --git a/drivers/vfio/pci/vfio_pci_intrs.c b/drivers/vfio/pci/vfio_pci_intrs.c
index 2103576..9dd49c9 100644
--- a/drivers/vfio/pci/vfio_pci_intrs.c
+++ b/drivers/vfio/pci/vfio_pci_intrs.c
@@ -482,15 +482,19 @@
for (i = 0; i < nvec; i++)
vdev->msix[i].entry = i;
- ret = pci_enable_msix(pdev, vdev->msix, nvec);
- if (ret) {
+ ret = pci_enable_msix_range(pdev, vdev->msix, 1, nvec);
+ if (ret < nvec) {
+ if (ret > 0)
+ pci_disable_msix(pdev);
kfree(vdev->msix);
kfree(vdev->ctx);
return ret;
}
} else {
- ret = pci_enable_msi_block(pdev, nvec);
- if (ret) {
+ ret = pci_enable_msi_range(pdev, 1, nvec);
+ if (ret < nvec) {
+ if (ret > 0)
+ pci_disable_msi(pdev);
kfree(vdev->ctx);
return ret;
}
diff --git a/include/acpi/acpi_numa.h b/include/acpi/acpi_numa.h
index 451823c..94a37cd 100644
--- a/include/acpi/acpi_numa.h
+++ b/include/acpi/acpi_numa.h
@@ -13,7 +13,6 @@
extern int pxm_to_node(int);
extern int node_to_pxm(int);
-extern void __acpi_map_pxm_to_node(int, int);
extern int acpi_map_pxm_to_node(int);
extern unsigned char acpi_srat_revision;
diff --git a/include/linux/acpi.h b/include/linux/acpi.h
index 1151a1d..6c29abb 100644
--- a/include/linux/acpi.h
+++ b/include/linux/acpi.h
@@ -259,14 +259,9 @@
extern void acpi_osi_setup(char *str);
#ifdef CONFIG_ACPI_NUMA
-int acpi_get_pxm(acpi_handle handle);
-int acpi_get_node(acpi_handle *handle);
+int acpi_get_node(acpi_handle handle);
#else
-static inline int acpi_get_pxm(acpi_handle handle)
-{
- return 0;
-}
-static inline int acpi_get_node(acpi_handle *handle)
+static inline int acpi_get_node(acpi_handle handle)
{
return 0;
}
diff --git a/include/linux/pci.h b/include/linux/pci.h
index fb57c89..27b1b9b 100644
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -170,6 +170,8 @@
PCI_DEV_FLAGS_NO_D3 = (__force pci_dev_flags_t) 2,
/* Provide indication device is assigned by a Virtual Machine Manager */
PCI_DEV_FLAGS_ASSIGNED = (__force pci_dev_flags_t) 4,
+ /* Flag for quirk use to store if quirk-specific ACS is enabled */
+ PCI_DEV_FLAGS_ACS_ENABLED_QUIRK = (__force pci_dev_flags_t) 8,
};
enum pci_irq_reroute_variant {
@@ -461,7 +463,6 @@
unsigned int is_added:1;
};
-#define pci_bus_b(n) list_entry(n, struct pci_bus, node)
#define to_pci_bus(n) container_of(n, struct pci_bus, dev)
/*
@@ -1169,8 +1170,23 @@
void pci_restore_msi_state(struct pci_dev *dev);
int pci_msi_enabled(void);
int pci_enable_msi_range(struct pci_dev *dev, int minvec, int maxvec);
+static inline int pci_enable_msi_exact(struct pci_dev *dev, int nvec)
+{
+ int rc = pci_enable_msi_range(dev, nvec, nvec);
+ if (rc < 0)
+ return rc;
+ return 0;
+}
int pci_enable_msix_range(struct pci_dev *dev, struct msix_entry *entries,
int minvec, int maxvec);
+static inline int pci_enable_msix_exact(struct pci_dev *dev,
+ struct msix_entry *entries, int nvec)
+{
+ int rc = pci_enable_msix_range(dev, entries, nvec, nvec);
+ if (rc < 0)
+ return rc;
+ return 0;
+}
#else
static inline int pci_msi_vec_count(struct pci_dev *dev) { return -ENOSYS; }
static inline int pci_enable_msi_block(struct pci_dev *dev, int nvec)
@@ -1189,9 +1205,14 @@
static inline int pci_enable_msi_range(struct pci_dev *dev, int minvec,
int maxvec)
{ return -ENOSYS; }
+static inline int pci_enable_msi_exact(struct pci_dev *dev, int nvec)
+{ return -ENOSYS; }
static inline int pci_enable_msix_range(struct pci_dev *dev,
struct msix_entry *entries, int minvec, int maxvec)
{ return -ENOSYS; }
+static inline int pci_enable_msix_exact(struct pci_dev *dev,
+ struct msix_entry *entries, int nvec)
+{ return -ENOSYS; }
#endif
#ifdef CONFIG_PCIEPORTBUS
@@ -1510,6 +1531,7 @@
void pci_fixup_device(enum pci_fixup_pass pass, struct pci_dev *dev);
struct pci_dev *pci_get_dma_source(struct pci_dev *dev);
int pci_dev_specific_acs_enabled(struct pci_dev *dev, u16 acs_flags);
+void pci_dev_specific_enable_acs(struct pci_dev *dev);
#else
static inline void pci_fixup_device(enum pci_fixup_pass pass,
struct pci_dev *dev) { }
@@ -1522,6 +1544,7 @@
{
return -ENOTTY;
}
+static inline void pci_dev_specific_enable_acs(struct pci_dev *dev) { }
#endif
void __iomem *pcim_iomap(struct pci_dev *pdev, int bar, unsigned long maxlen);