Staging: add epl stack

This is the openPOWERLINK network stack from systec electronic.

It's a bit messed up as there is a driver mixed into the
middle of it, lots of work needs to be done to unwind the
different portions to make it sane.

Cc: Daniel Krueger <daniel.krueger@systec-electronic.com>
Cc: Ronald Sieber <Ronald.Sieber@systec-electronic.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

diff --git a/drivers/staging/epl/edrv.h b/drivers/staging/epl/edrv.h
new file mode 100644
index 0000000..139523c
--- /dev/null
+++ b/drivers/staging/epl/edrv.h
@@ -0,0 +1,183 @@
+/****************************************************************************
+
+  (c) SYSTEC electronic GmbH, D-07973 Greiz, August-Bebel-Str. 29
+      www.systec-electronic.com
+
+  Project:      openPOWERLINK
+
+  Description:  interface for ethernetdriver
+
+  License:
+
+    Redistribution and use in source and binary forms, with or without
+    modification, are permitted provided that the following conditions
+    are met:
+
+    1. Redistributions of source code must retain the above copyright
+       notice, this list of conditions and the following disclaimer.
+
+    2. Redistributions in binary form must reproduce the above copyright
+       notice, this list of conditions and the following disclaimer in the
+       documentation and/or other materials provided with the distribution.
+
+    3. Neither the name of SYSTEC electronic GmbH nor the names of its
+       contributors may be used to endorse or promote products derived
+       from this software without prior written permission. For written
+       permission, please contact info@systec-electronic.com.
+
+    THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+    "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+    LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+    FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+    COPYRIGHT HOLDERS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+    INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+    BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+    LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+    CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+    LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+    ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+    POSSIBILITY OF SUCH DAMAGE.
+
+    Severability Clause:
+
+        If a provision of this License is or becomes illegal, invalid or
+        unenforceable in any jurisdiction, that shall not affect:
+        1. the validity or enforceability in that jurisdiction of any other
+           provision of this License; or
+        2. the validity or enforceability in other jurisdictions of that or
+           any other provision of this License.
+
+  -------------------------------------------------------------------------
+
+                $RCSfile: edrv.h,v $
+
+                $Author: D.Krueger $
+
+                $Revision: 1.6 $  $Date: 2008/04/17 21:36:32 $
+
+                $State: Exp $
+
+                Build Environment:
+                Dev C++ and GNU-Compiler for m68k
+
+  -------------------------------------------------------------------------
+
+  Revision History:
+
+  2005/08/01 m.b.:   start of implementation
+
+****************************************************************************/
+
+#ifndef _EDRV_H_
+#define _EDRV_H_
+
+#include "EplInc.h"
+#include "EplFrame.h"
+
+//---------------------------------------------------------------------------
+// const defines
+//---------------------------------------------------------------------------
+// --------------------------------------------------------------------------
+#define MAX_ETH_DATA_SIZE       1500
+#define MIN_ETH_DATA_SIZE         46
+
+#define ETH_HDR_OFFSET 	 0      // Ethernet header at the top of the frame
+#define ETH_HDR_SIZE	14      // size of Ethernet header
+#define MIN_ETH_SIZE     (MIN_ETH_DATA_SIZE + ETH_HDR_SIZE)    // without CRC
+
+#define ETH_CRC_SIZE	 4      // size of Ethernet CRC, i.e. FCS
+
+
+
+//---------------------------------------------------------------------------
+// types
+//---------------------------------------------------------------------------
+
+// position of a buffer in an ethernet-frame
+typedef enum
+{
+    kEdrvBufferFirstInFrame   = 0x01,  // first data buffer in an ethernet frame
+    kEdrvBufferMiddleInFrame  = 0x02,  // a middle data buffer in an ethernet frame
+    kEdrvBufferLastInFrame    = 0x04   // last data buffer in an ethernet frame
+} tEdrvBufferInFrame;
+
+
+// format of a tx-buffer
+typedef struct _tEdrvTxBuffer
+{
+    tEplMsgType     m_EplMsgType;           // IN: type of EPL message, set by calling function
+    unsigned int    m_uiTxMsgLen;           // IN: length of message to be send (set for each transmit call)
+    // ----------------------
+    unsigned int    m_uiBufferNumber;       // OUT: number of the buffer, set by ethernetdriver
+    BYTE  *         m_pbBuffer;             // OUT: pointer to the buffer, set by ethernetdriver
+    tEplNetTime     m_NetTime;              // OUT: Timestamp of end of transmission, set by ethernetdriver
+    // ----------------------
+    unsigned int    m_uiMaxBufferLen;       // IN/OUT: maximum length of the buffer
+} tEdrvTxBuffer;
+
+// format of a rx-buffer
+typedef struct _tEdrvRxBuffer
+{
+    tEdrvBufferInFrame m_BufferInFrame;   // OUT position of received buffer in an ethernet-frame
+    unsigned int       m_uiRxMsgLen;        // OUT: length of received buffer (without CRC)
+    BYTE  *            m_pbBuffer;          // OUT: pointer to the buffer, set by ethernetdriver
+    tEplNetTime        m_NetTime;           // OUT: Timestamp of end of receiption
+
+} tEdrvRxBuffer;
+
+
+
+//typedef void (*tEdrvRxHandler) (BYTE bBufferInFrame_p, tBufferDescr * pbBuffer_p);
+//typedef void (*tEdrvRxHandler) (BYTE bBufferInFrame_p, BYTE * pbEthernetData_p, WORD wDataLen_p);
+typedef void (*tEdrvRxHandler) (tEdrvRxBuffer * pRxBuffer_p);
+typedef void (*tEdrvTxHandler) (tEdrvTxBuffer * pTxBuffer_p);
+
+
+// format of init structure
+typedef struct
+{
+    BYTE            m_abMyMacAddr[6];       // the own MAC address
+
+//    BYTE            m_bNoOfRxBuffDescr;     // number of entries in rx bufferdescriptor table
+//    tBufferDescr *  m_pRxBuffDescrTable;    // rx bufferdescriptor table
+//    WORD            m_wRxBufferSize;        // size of the whole rx buffer
+
+    tEdrvRxHandler  m_pfnRxHandler;
+    tEdrvTxHandler  m_pfnTxHandler;
+
+} tEdrvInitParam;
+
+
+//---------------------------------------------------------------------------
+// function prototypes
+//---------------------------------------------------------------------------
+
+
+tEplKernel EdrvInit                   (tEdrvInitParam* pEdrvInitParam_p);
+
+tEplKernel EdrvShutdown               (void);
+
+tEplKernel EdrvDefineRxMacAddrEntry   (BYTE * pbMacAddr_p);
+tEplKernel EdrvUndefineRxMacAddrEntry (BYTE * pbMacAddr_p);
+
+//tEplKernel EdrvDefineUnicastEntry     (BYTE * pbUCEntry_p);
+//tEplKernel EdrvUndfineUnicastEntry    (BYTE * pbUCEntry_p);
+
+tEplKernel EdrvAllocTxMsgBuffer       (tEdrvTxBuffer * pBuffer_p);
+tEplKernel EdrvReleaseTxMsgBuffer     (tEdrvTxBuffer * pBuffer_p);
+
+//tEplKernel EdrvWriteMsg               (tBufferDescr * pbBuffer_p);
+tEplKernel EdrvSendTxMsg              (tEdrvTxBuffer * pBuffer_p);
+tEplKernel EdrvTxMsgReady              (tEdrvTxBuffer * pBuffer_p);
+tEplKernel EdrvTxMsgStart              (tEdrvTxBuffer * pBuffer_p);
+
+//tEplKernel EdrvReadMsg                (void);
+
+// interrupt handler called by target specific interrupt handler
+void        EdrvInterruptHandler       (void);
+
+
+
+#endif  // #ifndef _EDRV_H_
+
+