Merge branch 'fix/misc' into for-linus
* fix/misc:
ALSA: riptide - proper handling of pci_register_driver for joystick
diff --git a/.gitignore b/.gitignore
index cecb3b0..b93fb7e 100644
--- a/.gitignore
+++ b/.gitignore
@@ -27,6 +27,7 @@
*.gz
*.lzma
*.patch
+*.gcno
#
# Top-level generic files
diff --git a/Documentation/DocBook/mac80211.tmpl b/Documentation/DocBook/mac80211.tmpl
index e369866..f3f37f1 100644
--- a/Documentation/DocBook/mac80211.tmpl
+++ b/Documentation/DocBook/mac80211.tmpl
@@ -184,8 +184,6 @@
!Finclude/net/mac80211.h ieee80211_ctstoself_get
!Finclude/net/mac80211.h ieee80211_ctstoself_duration
!Finclude/net/mac80211.h ieee80211_generic_frame_duration
-!Finclude/net/mac80211.h ieee80211_get_hdrlen_from_skb
-!Finclude/net/mac80211.h ieee80211_hdrlen
!Finclude/net/mac80211.h ieee80211_wake_queue
!Finclude/net/mac80211.h ieee80211_stop_queue
!Finclude/net/mac80211.h ieee80211_wake_queues
diff --git a/Documentation/block/data-integrity.txt b/Documentation/block/data-integrity.txt
index e8ca040..2d735b0a 100644
--- a/Documentation/block/data-integrity.txt
+++ b/Documentation/block/data-integrity.txt
@@ -50,7 +50,7 @@
scatter-gather lists.
The controller will interleave the buffers on write and split them on
-read. This means that the Linux can DMA the data buffers to and from
+read. This means that Linux can DMA the data buffers to and from
host memory without changes to the page cache.
Also, the 16-bit CRC checksum mandated by both the SCSI and SATA specs
@@ -66,7 +66,7 @@
The IP checksum is weaker than the CRC in terms of detecting bit
errors. However, the strength is really in the separation of the data
-buffers and the integrity metadata. These two distinct buffers much
+buffers and the integrity metadata. These two distinct buffers must
match up for an I/O to complete.
The separation of the data and integrity metadata buffers as well as
diff --git a/Documentation/cgroups/cpusets.txt b/Documentation/cgroups/cpusets.txt
index f9ca389..1d7e978 100644
--- a/Documentation/cgroups/cpusets.txt
+++ b/Documentation/cgroups/cpusets.txt
@@ -777,6 +777,18 @@
# /bin/echo 1-4 > cpus -> set cpus list to cpus 1,2,3,4
# /bin/echo 1,2,3,4 > cpus -> set cpus list to cpus 1,2,3,4
+To add a CPU to a cpuset, write the new list of CPUs including the
+CPU to be added. To add 6 to the above cpuset:
+
+# /bin/echo 1-4,6 > cpus -> set cpus list to cpus 1,2,3,4,6
+
+Similarly to remove a CPU from a cpuset, write the new list of CPUs
+without the CPU to be removed.
+
+To remove all the CPUs:
+
+# /bin/echo "" > cpus -> clear cpus list
+
2.3 Setting flags
-----------------
diff --git a/Documentation/driver-model/driver.txt b/Documentation/driver-model/driver.txt
index 8213216..60120fb 100644
--- a/Documentation/driver-model/driver.txt
+++ b/Documentation/driver-model/driver.txt
@@ -207,8 +207,8 @@
~~~~~~~~~~
struct driver_attribute {
struct attribute attr;
- ssize_t (*show)(struct device_driver *, char * buf, size_t count, loff_t off);
- ssize_t (*store)(struct device_driver *, const char * buf, size_t count, loff_t off);
+ ssize_t (*show)(struct device_driver *driver, char *buf);
+ ssize_t (*store)(struct device_driver *, const char * buf, size_t count);
};
Device drivers can export attributes via their sysfs directories.
diff --git a/Documentation/dvb/get_dvb_firmware b/Documentation/dvb/get_dvb_firmware
index a52adfc9..3d1b0ab 100644
--- a/Documentation/dvb/get_dvb_firmware
+++ b/Documentation/dvb/get_dvb_firmware
@@ -25,7 +25,7 @@
"tda10046lifeview", "av7110", "dec2000t", "dec2540t",
"dec3000s", "vp7041", "dibusb", "nxt2002", "nxt2004",
"or51211", "or51132_qam", "or51132_vsb", "bluebird",
- "opera1", "cx231xx", "cx18", "cx23885", "pvrusb2" );
+ "opera1", "cx231xx", "cx18", "cx23885", "pvrusb2", "mpc718" );
# Check args
syntax() if (scalar(@ARGV) != 1);
@@ -381,6 +381,57 @@
$allfiles;
}
+sub mpc718 {
+ my $archive = 'Yuan MPC718 TV Tuner Card 2.13.10.1016.zip';
+ my $url = "ftp://ftp.work.acer-euro.com/desktop/aspire_idea510/vista/Drivers/$archive";
+ my $fwfile = "dvb-cx18-mpc718-mt352.fw";
+ my $tmpdir = tempdir(DIR => "/tmp", CLEANUP => 1);
+
+ checkstandard();
+ wgetfile($archive, $url);
+ unzip($archive, $tmpdir);
+
+ my $sourcefile = "$tmpdir/Yuan MPC718 TV Tuner Card 2.13.10.1016/mpc718_32bit/yuanrap.sys";
+ my $found = 0;
+
+ open IN, '<', $sourcefile or die "Couldn't open $sourcefile to extract $fwfile data\n";
+ binmode IN;
+ open OUT, '>', $fwfile;
+ binmode OUT;
+ {
+ # Block scope because we change the line terminator variable $/
+ my $prevlen = 0;
+ my $currlen;
+
+ # Buried in the data segment are 3 runs of almost identical
+ # register-value pairs that end in 0x5d 0x01 which is a "TUNER GO"
+ # command for the MT352.
+ # Pull out the middle run (because it's easy) of register-value
+ # pairs to make the "firmware" file.
+
+ local $/ = "\x5d\x01"; # MT352 "TUNER GO"
+
+ while (<IN>) {
+ $currlen = length($_);
+ if ($prevlen == $currlen && $currlen <= 64) {
+ chop; chop; # Get rid of "TUNER GO"
+ s/^\0\0//; # get rid of leading 00 00 if it's there
+ printf OUT "$_";
+ $found = 1;
+ last;
+ }
+ $prevlen = $currlen;
+ }
+ }
+ close OUT;
+ close IN;
+ if (!$found) {
+ unlink $fwfile;
+ die "Couldn't find valid register-value sequence in $sourcefile for $fwfile\n";
+ }
+ $fwfile;
+}
+
sub cx23885 {
my $url = "http://linuxtv.org/downloads/firmware/";
diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt
index f8cd450..09e031c 100644
--- a/Documentation/feature-removal-schedule.txt
+++ b/Documentation/feature-removal-schedule.txt
@@ -458,3 +458,13 @@
but the old version has been kept around for easier testing. Note this
doesn't impact the old P5 and WinChip machine check handlers.
Who: Andi Kleen <andi@firstfloor.org>
+
+----------------------------
+
+What: lock_policy_rwsem_* and unlock_policy_rwsem_* will not be
+ exported interface anymore.
+When: 2.6.33
+Why: cpu_policy_rwsem has a new cleaner definition making it local to
+ cpufreq core and contained inside cpufreq.c. Other dependent
+ drivers should not use it in order to safely avoid lockdep issues.
+Who: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
diff --git a/Documentation/gcov.txt b/Documentation/gcov.txt
index e716aad..40ec633 100644
--- a/Documentation/gcov.txt
+++ b/Documentation/gcov.txt
@@ -188,13 +188,18 @@
GCOV_PROFILE := n or GCOV_PROFILE_basename.o := n in the
corresponding Makefile.
+Problem: Files copied from sysfs appear empty or incomplete.
+Cause: Due to the way seq_file works, some tools such as cp or tar
+ may not correctly copy files from sysfs.
+Solution: Use 'cat' to read .gcda files and 'cp -d' to copy links.
+ Alternatively use the mechanism shown in Appendix B.
+
Appendix A: gather_on_build.sh
==============================
Sample script to gather coverage meta files on the build machine
(see 6a):
-
#!/bin/bash
KSRC=$1
@@ -226,7 +231,7 @@
Sample script to gather coverage data files on the test machine
(see 6b):
-#!/bin/bash
+#!/bin/bash -e
DEST=$1
GCDA=/sys/kernel/debug/gcov
@@ -236,11 +241,13 @@
exit 1
fi
-find $GCDA -name '*.gcno' -o -name '*.gcda' | tar cfz $DEST -T -
+TEMPDIR=$(mktemp -d)
+echo Collecting data..
+find $GCDA -type d -exec mkdir -p $TEMPDIR/\{\} \;
+find $GCDA -name '*.gcda' -exec sh -c 'cat < $0 > '$TEMPDIR'/$0' {} \;
+find $GCDA -name '*.gcno' -exec sh -c 'cp -d $0 '$TEMPDIR'/$0' {} \;
+tar czf $DEST -C $TEMPDIR sys
+rm -rf $TEMPDIR
-if [ $? -eq 0 ] ; then
- echo "$DEST successfully created, copy to build system and unpack with:"
- echo " tar xfz $DEST"
-else
- echo "Could not create file $DEST"
-fi
+echo "$DEST successfully created, copy to build system and unpack with:"
+echo " tar xfz $DEST"
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index d08759a..dd1a6d4 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -1720,8 +1720,8 @@
oprofile.cpu_type= Force an oprofile cpu type
This might be useful if you have an older oprofile
userland or if you want common events.
- Format: { archperfmon }
- archperfmon: [X86] Force use of architectural
+ Format: { arch_perfmon }
+ arch_perfmon: [X86] Force use of architectural
perfmon on Intel CPUs instead of the
CPU specific event set.
@@ -1915,6 +1915,12 @@
Format: { 0 | 1 }
See arch/parisc/kernel/pdc_chassis.c
+ percpu_alloc= [X86] Select which percpu first chunk allocator to use.
+ Allowed values are one of "lpage", "embed" and "4k".
+ See comments in arch/x86/kernel/setup_percpu.c for
+ details on each allocator. This parameter is primarily
+ for debugging and performance comparison.
+
pf. [PARIDE]
See Documentation/blockdev/paride.txt.
@@ -2467,7 +2473,8 @@
tp720= [HW,PS2]
- trace_buf_size=nn[KMG] [ftrace] will set tracing buffer size.
+ trace_buf_size=nn[KMG]
+ [FTRACE] will set tracing buffer size.
trix= [HW,OSS] MediaTrix AudioTrix Pro
Format:
diff --git a/Documentation/kmemleak.txt b/Documentation/kmemleak.txt
index 0112da3..8906803 100644
--- a/Documentation/kmemleak.txt
+++ b/Documentation/kmemleak.txt
@@ -16,13 +16,17 @@
-----
CONFIG_DEBUG_KMEMLEAK in "Kernel hacking" has to be enabled. A kernel
-thread scans the memory every 10 minutes (by default) and prints any new
-unreferenced objects found. To trigger an intermediate scan and display
-all the possible memory leaks:
+thread scans the memory every 10 minutes (by default) and prints the
+number of new unreferenced objects found. To display the details of all
+the possible memory leaks:
# mount -t debugfs nodev /sys/kernel/debug/
# cat /sys/kernel/debug/kmemleak
+To trigger an intermediate memory scan:
+
+ # echo scan > /sys/kernel/debug/kmemleak
+
Note that the orphan objects are listed in the order they were allocated
and one object at the beginning of the list may cause other subsequent
objects to be reported as orphan.
@@ -31,16 +35,21 @@
/sys/kernel/debug/kmemleak file. The following parameters are supported:
off - disable kmemleak (irreversible)
- stack=on - enable the task stacks scanning
+ stack=on - enable the task stacks scanning (default)
stack=off - disable the tasks stacks scanning
- scan=on - start the automatic memory scanning thread
+ scan=on - start the automatic memory scanning thread (default)
scan=off - stop the automatic memory scanning thread
- scan=<secs> - set the automatic memory scanning period in seconds (0
- to disable it)
+ scan=<secs> - set the automatic memory scanning period in seconds
+ (default 600, 0 to stop the automatic scanning)
+ scan - trigger a memory scan
Kmemleak can also be disabled at boot-time by passing "kmemleak=off" on
the kernel command line.
+Memory may be allocated or freed before kmemleak is initialised and
+these actions are stored in an early log buffer. The size of this buffer
+is configured via the CONFIG_DEBUG_KMEMLEAK_EARLY_LOG_SIZE option.
+
Basic Algorithm
---------------
diff --git a/Documentation/leds-lp3944.txt b/Documentation/leds-lp3944.txt
new file mode 100644
index 0000000..c6eda18
--- /dev/null
+++ b/Documentation/leds-lp3944.txt
@@ -0,0 +1,50 @@
+Kernel driver lp3944
+====================
+
+ * National Semiconductor LP3944 Fun-light Chip
+ Prefix: 'lp3944'
+ Addresses scanned: None (see the Notes section below)
+ Datasheet: Publicly available at the National Semiconductor website
+ http://www.national.com/pf/LP/LP3944.html
+
+Authors:
+ Antonio Ospite <ospite@studenti.unina.it>
+
+
+Description
+-----------
+The LP3944 is a helper chip that can drive up to 8 leds, with two programmable
+DIM modes; it could even be used as a gpio expander but this driver assumes it
+is used as a led controller.
+
+The DIM modes are used to set _blink_ patterns for leds, the pattern is
+specified supplying two parameters:
+ - period: from 0s to 1.6s
+ - duty cycle: percentage of the period the led is on, from 0 to 100
+
+Setting a led in DIM0 or DIM1 mode makes it blink according to the pattern.
+See the datasheet for details.
+
+LP3944 can be found on Motorola A910 smartphone, where it drives the rgb
+leds, the camera flash light and the lcds power.
+
+
+Notes
+-----
+The chip is used mainly in embedded contexts, so this driver expects it is
+registered using the i2c_board_info mechanism.
+
+To register the chip at address 0x60 on adapter 0, set the platform data
+according to include/linux/leds-lp3944.h, set the i2c board info:
+
+ static struct i2c_board_info __initdata a910_i2c_board_info[] = {
+ {
+ I2C_BOARD_INFO("lp3944", 0x60),
+ .platform_data = &a910_lp3944_leds,
+ },
+ };
+
+and register it in the platform init function
+
+ i2c_register_board_info(0, a910_i2c_board_info,
+ ARRAY_SIZE(a910_i2c_board_info));
diff --git a/Documentation/powerpc/booting-without-of.txt b/Documentation/powerpc/booting-without-of.txt
index 8d999d8..79f533f 100644
--- a/Documentation/powerpc/booting-without-of.txt
+++ b/Documentation/powerpc/booting-without-of.txt
@@ -1238,1122 +1238,7 @@
defined; this list will expand as more and more SOC-containing
platforms are moved over to use the flattened-device-tree model.
- a) PHY nodes
-
- Required properties:
-
- - device_type : Should be "ethernet-phy"
- - interrupts : <a b> where a is the interrupt number and b is a
- field that represents an encoding of the sense and level
- information for the interrupt. This should be encoded based on
- the information in section 2) depending on the type of interrupt
- controller you have.
- - interrupt-parent : the phandle for the interrupt controller that
- services interrupts for this device.
- - reg : The ID number for the phy, usually a small integer
- - linux,phandle : phandle for this node; likely referenced by an
- ethernet controller node.
-
-
- Example:
-
- ethernet-phy@0 {
- linux,phandle = <2452000>
- interrupt-parent = <40000>;
- interrupts = <35 1>;
- reg = <0>;
- device_type = "ethernet-phy";
- };
-
-
- b) Interrupt controllers
-
- Some SOC devices contain interrupt controllers that are different
- from the standard Open PIC specification. The SOC device nodes for
- these types of controllers should be specified just like a standard
- OpenPIC controller. Sense and level information should be encoded
- as specified in section 2) of this chapter for each device that
- specifies an interrupt.
-
- Example :
-
- pic@40000 {
- linux,phandle = <40000>;
- interrupt-controller;
- #address-cells = <0>;
- reg = <40000 40000>;
- compatible = "chrp,open-pic";
- device_type = "open-pic";
- };
-
- c) 4xx/Axon EMAC ethernet nodes
-
- The EMAC ethernet controller in IBM and AMCC 4xx chips, and also
- the Axon bridge. To operate this needs to interact with a ths
- special McMAL DMA controller, and sometimes an RGMII or ZMII
- interface. In addition to the nodes and properties described
- below, the node for the OPB bus on which the EMAC sits must have a
- correct clock-frequency property.
-
- i) The EMAC node itself
-
- Required properties:
- - device_type : "network"
-
- - compatible : compatible list, contains 2 entries, first is
- "ibm,emac-CHIP" where CHIP is the host ASIC (440gx,
- 405gp, Axon) and second is either "ibm,emac" or
- "ibm,emac4". For Axon, thus, we have: "ibm,emac-axon",
- "ibm,emac4"
- - interrupts : <interrupt mapping for EMAC IRQ and WOL IRQ>
- - interrupt-parent : optional, if needed for interrupt mapping
- - reg : <registers mapping>
- - local-mac-address : 6 bytes, MAC address
- - mal-device : phandle of the associated McMAL node
- - mal-tx-channel : 1 cell, index of the tx channel on McMAL associated
- with this EMAC
- - mal-rx-channel : 1 cell, index of the rx channel on McMAL associated
- with this EMAC
- - cell-index : 1 cell, hardware index of the EMAC cell on a given
- ASIC (typically 0x0 and 0x1 for EMAC0 and EMAC1 on
- each Axon chip)
- - max-frame-size : 1 cell, maximum frame size supported in bytes
- - rx-fifo-size : 1 cell, Rx fifo size in bytes for 10 and 100 Mb/sec
- operations.
- For Axon, 2048
- - tx-fifo-size : 1 cell, Tx fifo size in bytes for 10 and 100 Mb/sec
- operations.
- For Axon, 2048.
- - fifo-entry-size : 1 cell, size of a fifo entry (used to calculate
- thresholds).
- For Axon, 0x00000010
- - mal-burst-size : 1 cell, MAL burst size (used to calculate thresholds)
- in bytes.
- For Axon, 0x00000100 (I think ...)
- - phy-mode : string, mode of operations of the PHY interface.
- Supported values are: "mii", "rmii", "smii", "rgmii",
- "tbi", "gmii", rtbi", "sgmii".
- For Axon on CAB, it is "rgmii"
- - mdio-device : 1 cell, required iff using shared MDIO registers
- (440EP). phandle of the EMAC to use to drive the
- MDIO lines for the PHY used by this EMAC.
- - zmii-device : 1 cell, required iff connected to a ZMII. phandle of
- the ZMII device node
- - zmii-channel : 1 cell, required iff connected to a ZMII. Which ZMII
- channel or 0xffffffff if ZMII is only used for MDIO.
- - rgmii-device : 1 cell, required iff connected to an RGMII. phandle
- of the RGMII device node.
- For Axon: phandle of plb5/plb4/opb/rgmii
- - rgmii-channel : 1 cell, required iff connected to an RGMII. Which
- RGMII channel is used by this EMAC.
- Fox Axon: present, whatever value is appropriate for each
- EMAC, that is the content of the current (bogus) "phy-port"
- property.
-
- Optional properties:
- - phy-address : 1 cell, optional, MDIO address of the PHY. If absent,
- a search is performed.
- - phy-map : 1 cell, optional, bitmap of addresses to probe the PHY
- for, used if phy-address is absent. bit 0x00000001 is
- MDIO address 0.
- For Axon it can be absent, though my current driver
- doesn't handle phy-address yet so for now, keep
- 0x00ffffff in it.
- - rx-fifo-size-gige : 1 cell, Rx fifo size in bytes for 1000 Mb/sec
- operations (if absent the value is the same as
- rx-fifo-size). For Axon, either absent or 2048.
- - tx-fifo-size-gige : 1 cell, Tx fifo size in bytes for 1000 Mb/sec
- operations (if absent the value is the same as
- tx-fifo-size). For Axon, either absent or 2048.
- - tah-device : 1 cell, optional. If connected to a TAH engine for
- offload, phandle of the TAH device node.
- - tah-channel : 1 cell, optional. If appropriate, channel used on the
- TAH engine.
-
- Example:
-
- EMAC0: ethernet@40000800 {
- device_type = "network";
- compatible = "ibm,emac-440gp", "ibm,emac";
- interrupt-parent = <&UIC1>;
- interrupts = <1c 4 1d 4>;
- reg = <40000800 70>;
- local-mac-address = [00 04 AC E3 1B 1E];
- mal-device = <&MAL0>;
- mal-tx-channel = <0 1>;
- mal-rx-channel = <0>;
- cell-index = <0>;
- max-frame-size = <5dc>;
- rx-fifo-size = <1000>;
- tx-fifo-size = <800>;
- phy-mode = "rmii";
- phy-map = <00000001>;
- zmii-device = <&ZMII0>;
- zmii-channel = <0>;
- };
-
- ii) McMAL node
-
- Required properties:
- - device_type : "dma-controller"
- - compatible : compatible list, containing 2 entries, first is
- "ibm,mcmal-CHIP" where CHIP is the host ASIC (like
- emac) and the second is either "ibm,mcmal" or
- "ibm,mcmal2".
- For Axon, "ibm,mcmal-axon","ibm,mcmal2"
- - interrupts : <interrupt mapping for the MAL interrupts sources:
- 5 sources: tx_eob, rx_eob, serr, txde, rxde>.
- For Axon: This is _different_ from the current
- firmware. We use the "delayed" interrupts for txeob
- and rxeob. Thus we end up with mapping those 5 MPIC
- interrupts, all level positive sensitive: 10, 11, 32,
- 33, 34 (in decimal)
- - dcr-reg : < DCR registers range >
- - dcr-parent : if needed for dcr-reg
- - num-tx-chans : 1 cell, number of Tx channels
- - num-rx-chans : 1 cell, number of Rx channels
-
- iii) ZMII node
-
- Required properties:
- - compatible : compatible list, containing 2 entries, first is
- "ibm,zmii-CHIP" where CHIP is the host ASIC (like
- EMAC) and the second is "ibm,zmii".
- For Axon, there is no ZMII node.
- - reg : <registers mapping>
-
- iv) RGMII node
-
- Required properties:
- - compatible : compatible list, containing 2 entries, first is
- "ibm,rgmii-CHIP" where CHIP is the host ASIC (like
- EMAC) and the second is "ibm,rgmii".
- For Axon, "ibm,rgmii-axon","ibm,rgmii"
- - reg : <registers mapping>
- - revision : as provided by the RGMII new version register if
- available.
- For Axon: 0x0000012a
-
- d) Xilinx IP cores
-
- The Xilinx EDK toolchain ships with a set of IP cores (devices) for use
- in Xilinx Spartan and Virtex FPGAs. The devices cover the whole range
- of standard device types (network, serial, etc.) and miscellaneous
- devices (gpio, LCD, spi, etc). Also, since these devices are
- implemented within the fpga fabric every instance of the device can be
- synthesised with different options that change the behaviour.
-
- Each IP-core has a set of parameters which the FPGA designer can use to
- control how the core is synthesized. Historically, the EDK tool would
- extract the device parameters relevant to device drivers and copy them
- into an 'xparameters.h' in the form of #define symbols. This tells the
- device drivers how the IP cores are configured, but it requres the kernel
- to be recompiled every time the FPGA bitstream is resynthesized.
-
- The new approach is to export the parameters into the device tree and
- generate a new device tree each time the FPGA bitstream changes. The
- parameters which used to be exported as #defines will now become
- properties of the device node. In general, device nodes for IP-cores
- will take the following form:
-
- (name): (generic-name)@(base-address) {
- compatible = "xlnx,(ip-core-name)-(HW_VER)"
- [, (list of compatible devices), ...];
- reg = <(baseaddr) (size)>;
- interrupt-parent = <&interrupt-controller-phandle>;
- interrupts = < ... >;
- xlnx,(parameter1) = "(string-value)";
- xlnx,(parameter2) = <(int-value)>;
- };
-
- (generic-name): an open firmware-style name that describes the
- generic class of device. Preferably, this is one word, such
- as 'serial' or 'ethernet'.
- (ip-core-name): the name of the ip block (given after the BEGIN
- directive in system.mhs). Should be in lowercase
- and all underscores '_' converted to dashes '-'.
- (name): is derived from the "PARAMETER INSTANCE" value.
- (parameter#): C_* parameters from system.mhs. The C_ prefix is
- dropped from the parameter name, the name is converted
- to lowercase and all underscore '_' characters are
- converted to dashes '-'.
- (baseaddr): the baseaddr parameter value (often named C_BASEADDR).
- (HW_VER): from the HW_VER parameter.
- (size): the address range size (often C_HIGHADDR - C_BASEADDR + 1).
-
- Typically, the compatible list will include the exact IP core version
- followed by an older IP core version which implements the same
- interface or any other device with the same interface.
-
- 'reg', 'interrupt-parent' and 'interrupts' are all optional properties.
-
- For example, the following block from system.mhs:
-
- BEGIN opb_uartlite
- PARAMETER INSTANCE = opb_uartlite_0
- PARAMETER HW_VER = 1.00.b
- PARAMETER C_BAUDRATE = 115200
- PARAMETER C_DATA_BITS = 8
- PARAMETER C_ODD_PARITY = 0
- PARAMETER C_USE_PARITY = 0
- PARAMETER C_CLK_FREQ = 50000000
- PARAMETER C_BASEADDR = 0xEC100000
- PARAMETER C_HIGHADDR = 0xEC10FFFF
- BUS_INTERFACE SOPB = opb_7
- PORT OPB_Clk = CLK_50MHz
- PORT Interrupt = opb_uartlite_0_Interrupt
- PORT RX = opb_uartlite_0_RX
- PORT TX = opb_uartlite_0_TX
- PORT OPB_Rst = sys_bus_reset_0
- END
-
- becomes the following device tree node:
-
- opb_uartlite_0: serial@ec100000 {
- device_type = "serial";
- compatible = "xlnx,opb-uartlite-1.00.b";
- reg = <ec100000 10000>;
- interrupt-parent = <&opb_intc_0>;
- interrupts = <1 0>; // got this from the opb_intc parameters
- current-speed = <d#115200>; // standard serial device prop
- clock-frequency = <d#50000000>; // standard serial device prop
- xlnx,data-bits = <8>;
- xlnx,odd-parity = <0>;
- xlnx,use-parity = <0>;
- };
-
- Some IP cores actually implement 2 or more logical devices. In
- this case, the device should still describe the whole IP core with
- a single node and add a child node for each logical device. The
- ranges property can be used to translate from parent IP-core to the
- registers of each device. In addition, the parent node should be
- compatible with the bus type 'xlnx,compound', and should contain
- #address-cells and #size-cells, as with any other bus. (Note: this
- makes the assumption that both logical devices have the same bus
- binding. If this is not true, then separate nodes should be used
- for each logical device). The 'cell-index' property can be used to
- enumerate logical devices within an IP core. For example, the
- following is the system.mhs entry for the dual ps2 controller found
- on the ml403 reference design.
-
- BEGIN opb_ps2_dual_ref
- PARAMETER INSTANCE = opb_ps2_dual_ref_0
- PARAMETER HW_VER = 1.00.a
- PARAMETER C_BASEADDR = 0xA9000000
- PARAMETER C_HIGHADDR = 0xA9001FFF
- BUS_INTERFACE SOPB = opb_v20_0
- PORT Sys_Intr1 = ps2_1_intr
- PORT Sys_Intr2 = ps2_2_intr
- PORT Clkin1 = ps2_clk_rx_1
- PORT Clkin2 = ps2_clk_rx_2
- PORT Clkpd1 = ps2_clk_tx_1
- PORT Clkpd2 = ps2_clk_tx_2
- PORT Rx1 = ps2_d_rx_1
- PORT Rx2 = ps2_d_rx_2
- PORT Txpd1 = ps2_d_tx_1
- PORT Txpd2 = ps2_d_tx_2
- END
-
- It would result in the following device tree nodes:
-
- opb_ps2_dual_ref_0: opb-ps2-dual-ref@a9000000 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "xlnx,compound";
- ranges = <0 a9000000 2000>;
- // If this device had extra parameters, then they would
- // go here.
- ps2@0 {
- compatible = "xlnx,opb-ps2-dual-ref-1.00.a";
- reg = <0 40>;
- interrupt-parent = <&opb_intc_0>;
- interrupts = <3 0>;
- cell-index = <0>;
- };
- ps2@1000 {
- compatible = "xlnx,opb-ps2-dual-ref-1.00.a";
- reg = <1000 40>;
- interrupt-parent = <&opb_intc_0>;
- interrupts = <3 0>;
- cell-index = <0>;
- };
- };
-
- Also, the system.mhs file defines bus attachments from the processor
- to the devices. The device tree structure should reflect the bus
- attachments. Again an example; this system.mhs fragment:
-
- BEGIN ppc405_virtex4
- PARAMETER INSTANCE = ppc405_0
- PARAMETER HW_VER = 1.01.a
- BUS_INTERFACE DPLB = plb_v34_0
- BUS_INTERFACE IPLB = plb_v34_0
- END
-
- BEGIN opb_intc
- PARAMETER INSTANCE = opb_intc_0
- PARAMETER HW_VER = 1.00.c
- PARAMETER C_BASEADDR = 0xD1000FC0
- PARAMETER C_HIGHADDR = 0xD1000FDF
- BUS_INTERFACE SOPB = opb_v20_0
- END
-
- BEGIN opb_uart16550
- PARAMETER INSTANCE = opb_uart16550_0
- PARAMETER HW_VER = 1.00.d
- PARAMETER C_BASEADDR = 0xa0000000
- PARAMETER C_HIGHADDR = 0xa0001FFF
- BUS_INTERFACE SOPB = opb_v20_0
- END
-
- BEGIN plb_v34
- PARAMETER INSTANCE = plb_v34_0
- PARAMETER HW_VER = 1.02.a
- END
-
- BEGIN plb_bram_if_cntlr
- PARAMETER INSTANCE = plb_bram_if_cntlr_0
- PARAMETER HW_VER = 1.00.b
- PARAMETER C_BASEADDR = 0xFFFF0000
- PARAMETER C_HIGHADDR = 0xFFFFFFFF
- BUS_INTERFACE SPLB = plb_v34_0
- END
-
- BEGIN plb2opb_bridge
- PARAMETER INSTANCE = plb2opb_bridge_0
- PARAMETER HW_VER = 1.01.a
- PARAMETER C_RNG0_BASEADDR = 0x20000000
- PARAMETER C_RNG0_HIGHADDR = 0x3FFFFFFF
- PARAMETER C_RNG1_BASEADDR = 0x60000000
- PARAMETER C_RNG1_HIGHADDR = 0x7FFFFFFF
- PARAMETER C_RNG2_BASEADDR = 0x80000000
- PARAMETER C_RNG2_HIGHADDR = 0xBFFFFFFF
- PARAMETER C_RNG3_BASEADDR = 0xC0000000
- PARAMETER C_RNG3_HIGHADDR = 0xDFFFFFFF
- BUS_INTERFACE SPLB = plb_v34_0
- BUS_INTERFACE MOPB = opb_v20_0
- END
-
- Gives this device tree (some properties removed for clarity):
-
- plb@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "xlnx,plb-v34-1.02.a";
- device_type = "ibm,plb";
- ranges; // 1:1 translation
-
- plb_bram_if_cntrl_0: bram@ffff0000 {
- reg = <ffff0000 10000>;
- }
-
- opb@20000000 {
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <20000000 20000000 20000000
- 60000000 60000000 20000000
- 80000000 80000000 40000000
- c0000000 c0000000 20000000>;
-
- opb_uart16550_0: serial@a0000000 {
- reg = <a00000000 2000>;
- };
-
- opb_intc_0: interrupt-controller@d1000fc0 {
- reg = <d1000fc0 20>;
- };
- };
- };
-
- That covers the general approach to binding xilinx IP cores into the
- device tree. The following are bindings for specific devices:
-
- i) Xilinx ML300 Framebuffer
-
- Simple framebuffer device from the ML300 reference design (also on the
- ML403 reference design as well as others).
-
- Optional properties:
- - resolution = <xres yres> : pixel resolution of framebuffer. Some
- implementations use a different resolution.
- Default is <d#640 d#480>
- - virt-resolution = <xvirt yvirt> : Size of framebuffer in memory.
- Default is <d#1024 d#480>.
- - rotate-display (empty) : rotate display 180 degrees.
-
- ii) Xilinx SystemACE
-
- The Xilinx SystemACE device is used to program FPGAs from an FPGA
- bitstream stored on a CF card. It can also be used as a generic CF
- interface device.
-
- Optional properties:
- - 8-bit (empty) : Set this property for SystemACE in 8 bit mode
-
- iii) Xilinx EMAC and Xilinx TEMAC
-
- Xilinx Ethernet devices. In addition to general xilinx properties
- listed above, nodes for these devices should include a phy-handle
- property, and may include other common network device properties
- like local-mac-address.
-
- iv) Xilinx Uartlite
-
- Xilinx uartlite devices are simple fixed speed serial ports.
-
- Required properties:
- - current-speed : Baud rate of uartlite
-
- v) Xilinx hwicap
-
- Xilinx hwicap devices provide access to the configuration logic
- of the FPGA through the Internal Configuration Access Port
- (ICAP). The ICAP enables partial reconfiguration of the FPGA,
- readback of the configuration information, and some control over
- 'warm boots' of the FPGA fabric.
-
- Required properties:
- - xlnx,family : The family of the FPGA, necessary since the
- capabilities of the underlying ICAP hardware
- differ between different families. May be
- 'virtex2p', 'virtex4', or 'virtex5'.
-
- vi) Xilinx Uart 16550
-
- Xilinx UART 16550 devices are very similar to the NS16550 but with
- different register spacing and an offset from the base address.
-
- Required properties:
- - clock-frequency : Frequency of the clock input
- - reg-offset : A value of 3 is required
- - reg-shift : A value of 2 is required
-
- e) USB EHCI controllers
-
- Required properties:
- - compatible : should be "usb-ehci".
- - reg : should contain at least address and length of the standard EHCI
- register set for the device. Optional platform-dependent registers
- (debug-port or other) can be also specified here, but only after
- definition of standard EHCI registers.
- - interrupts : one EHCI interrupt should be described here.
- If device registers are implemented in big endian mode, the device
- node should have "big-endian-regs" property.
- If controller implementation operates with big endian descriptors,
- "big-endian-desc" property should be specified.
- If both big endian registers and descriptors are used by the controller
- implementation, "big-endian" property can be specified instead of having
- both "big-endian-regs" and "big-endian-desc".
-
- Example (Sequoia 440EPx):
- ehci@e0000300 {
- compatible = "ibm,usb-ehci-440epx", "usb-ehci";
- interrupt-parent = <&UIC0>;
- interrupts = <1a 4>;
- reg = <0 e0000300 90 0 e0000390 70>;
- big-endian;
- };
-
- f) MDIO on GPIOs
-
- Currently defined compatibles:
- - virtual,gpio-mdio
-
- MDC and MDIO lines connected to GPIO controllers are listed in the
- gpios property as described in section VIII.1 in the following order:
-
- MDC, MDIO.
-
- Example:
-
- mdio {
- compatible = "virtual,mdio-gpio";
- #address-cells = <1>;
- #size-cells = <0>;
- gpios = <&qe_pio_a 11
- &qe_pio_c 6>;
- };
-
- g) SPI (Serial Peripheral Interface) busses
-
- SPI busses can be described with a node for the SPI master device
- and a set of child nodes for each SPI slave on the bus. For this
- discussion, it is assumed that the system's SPI controller is in
- SPI master mode. This binding does not describe SPI controllers
- in slave mode.
-
- The SPI master node requires the following properties:
- - #address-cells - number of cells required to define a chip select
- address on the SPI bus.
- - #size-cells - should be zero.
- - compatible - name of SPI bus controller following generic names
- recommended practice.
- No other properties are required in the SPI bus node. It is assumed
- that a driver for an SPI bus device will understand that it is an SPI bus.
- However, the binding does not attempt to define the specific method for
- assigning chip select numbers. Since SPI chip select configuration is
- flexible and non-standardized, it is left out of this binding with the
- assumption that board specific platform code will be used to manage
- chip selects. Individual drivers can define additional properties to
- support describing the chip select layout.
-
- SPI slave nodes must be children of the SPI master node and can
- contain the following properties.
- - reg - (required) chip select address of device.
- - compatible - (required) name of SPI device following generic names
- recommended practice
- - spi-max-frequency - (required) Maximum SPI clocking speed of device in Hz
- - spi-cpol - (optional) Empty property indicating device requires
- inverse clock polarity (CPOL) mode
- - spi-cpha - (optional) Empty property indicating device requires
- shifted clock phase (CPHA) mode
- - spi-cs-high - (optional) Empty property indicating device requires
- chip select active high
-
- SPI example for an MPC5200 SPI bus:
- spi@f00 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,mpc5200b-spi","fsl,mpc5200-spi";
- reg = <0xf00 0x20>;
- interrupts = <2 13 0 2 14 0>;
- interrupt-parent = <&mpc5200_pic>;
-
- ethernet-switch@0 {
- compatible = "micrel,ks8995m";
- spi-max-frequency = <1000000>;
- reg = <0>;
- };
-
- codec@1 {
- compatible = "ti,tlv320aic26";
- spi-max-frequency = <100000>;
- reg = <1>;
- };
- };
-
-VII - Marvell Discovery mv64[345]6x System Controller chips
-===========================================================
-
-The Marvell mv64[345]60 series of system controller chips contain
-many of the peripherals needed to implement a complete computer
-system. In this section, we define device tree nodes to describe
-the system controller chip itself and each of the peripherals
-which it contains. Compatible string values for each node are
-prefixed with the string "marvell,", for Marvell Technology Group Ltd.
-
-1) The /system-controller node
-
- This node is used to represent the system-controller and must be
- present when the system uses a system controller chip. The top-level
- system-controller node contains information that is global to all
- devices within the system controller chip. The node name begins
- with "system-controller" followed by the unit address, which is
- the base address of the memory-mapped register set for the system
- controller chip.
-
- Required properties:
-
- - ranges : Describes the translation of system controller addresses
- for memory mapped registers.
- - clock-frequency: Contains the main clock frequency for the system
- controller chip.
- - reg : This property defines the address and size of the
- memory-mapped registers contained within the system controller
- chip. The address specified in the "reg" property should match
- the unit address of the system-controller node.
- - #address-cells : Address representation for system controller
- devices. This field represents the number of cells needed to
- represent the address of the memory-mapped registers of devices
- within the system controller chip.
- - #size-cells : Size representation for for the memory-mapped
- registers within the system controller chip.
- - #interrupt-cells : Defines the width of cells used to represent
- interrupts.
-
- Optional properties:
-
- - model : The specific model of the system controller chip. Such
- as, "mv64360", "mv64460", or "mv64560".
- - compatible : A string identifying the compatibility identifiers
- of the system controller chip.
-
- The system-controller node contains child nodes for each system
- controller device that the platform uses. Nodes should not be created
- for devices which exist on the system controller chip but are not used
-
- Example Marvell Discovery mv64360 system-controller node:
-
- system-controller@f1000000 { /* Marvell Discovery mv64360 */
- #address-cells = <1>;
- #size-cells = <1>;
- model = "mv64360"; /* Default */
- compatible = "marvell,mv64360";
- clock-frequency = <133333333>;
- reg = <0xf1000000 0x10000>;
- virtual-reg = <0xf1000000>;
- ranges = <0x88000000 0x88000000 0x1000000 /* PCI 0 I/O Space */
- 0x80000000 0x80000000 0x8000000 /* PCI 0 MEM Space */
- 0xa0000000 0xa0000000 0x4000000 /* User FLASH */
- 0x00000000 0xf1000000 0x0010000 /* Bridge's regs */
- 0xf2000000 0xf2000000 0x0040000>;/* Integrated SRAM */
-
- [ child node definitions... ]
- }
-
-2) Child nodes of /system-controller
-
- a) Marvell Discovery MDIO bus
-
- The MDIO is a bus to which the PHY devices are connected. For each
- device that exists on this bus, a child node should be created. See
- the definition of the PHY node below for an example of how to define
- a PHY.
-
- Required properties:
- - #address-cells : Should be <1>
- - #size-cells : Should be <0>
- - device_type : Should be "mdio"
- - compatible : Should be "marvell,mv64360-mdio"
-
- Example:
-
- mdio {
- #address-cells = <1>;
- #size-cells = <0>;
- device_type = "mdio";
- compatible = "marvell,mv64360-mdio";
-
- ethernet-phy@0 {
- ......
- };
- };
-
-
- b) Marvell Discovery ethernet controller
-
- The Discover ethernet controller is described with two levels
- of nodes. The first level describes an ethernet silicon block
- and the second level describes up to 3 ethernet nodes within
- that block. The reason for the multiple levels is that the
- registers for the node are interleaved within a single set
- of registers. The "ethernet-block" level describes the
- shared register set, and the "ethernet" nodes describe ethernet
- port-specific properties.
-
- Ethernet block node
-
- Required properties:
- - #address-cells : <1>
- - #size-cells : <0>
- - compatible : "marvell,mv64360-eth-block"
- - reg : Offset and length of the register set for this block
-
- Example Discovery Ethernet block node:
- ethernet-block@2000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "marvell,mv64360-eth-block";
- reg = <0x2000 0x2000>;
- ethernet@0 {
- .......
- };
- };
-
- Ethernet port node
-
- Required properties:
- - device_type : Should be "network".
- - compatible : Should be "marvell,mv64360-eth".
- - reg : Should be <0>, <1>, or <2>, according to which registers
- within the silicon block the device uses.
- - interrupts : <a> where a is the interrupt number for the port.
- - interrupt-parent : the phandle for the interrupt controller
- that services interrupts for this device.
- - phy : the phandle for the PHY connected to this ethernet
- controller.
- - local-mac-address : 6 bytes, MAC address
-
- Example Discovery Ethernet port node:
- ethernet@0 {
- device_type = "network";
- compatible = "marvell,mv64360-eth";
- reg = <0>;
- interrupts = <32>;
- interrupt-parent = <&PIC>;
- phy = <&PHY0>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- };
-
-
-
- c) Marvell Discovery PHY nodes
-
- Required properties:
- - device_type : Should be "ethernet-phy"
- - interrupts : <a> where a is the interrupt number for this phy.
- - interrupt-parent : the phandle for the interrupt controller that
- services interrupts for this device.
- - reg : The ID number for the phy, usually a small integer
-
- Example Discovery PHY node:
- ethernet-phy@1 {
- device_type = "ethernet-phy";
- compatible = "broadcom,bcm5421";
- interrupts = <76>; /* GPP 12 */
- interrupt-parent = <&PIC>;
- reg = <1>;
- };
-
-
- d) Marvell Discovery SDMA nodes
-
- Represent DMA hardware associated with the MPSC (multiprotocol
- serial controllers).
-
- Required properties:
- - compatible : "marvell,mv64360-sdma"
- - reg : Offset and length of the register set for this device
- - interrupts : <a> where a is the interrupt number for the DMA
- device.
- - interrupt-parent : the phandle for the interrupt controller
- that services interrupts for this device.
-
- Example Discovery SDMA node:
- sdma@4000 {
- compatible = "marvell,mv64360-sdma";
- reg = <0x4000 0xc18>;
- virtual-reg = <0xf1004000>;
- interrupts = <36>;
- interrupt-parent = <&PIC>;
- };
-
-
- e) Marvell Discovery BRG nodes
-
- Represent baud rate generator hardware associated with the MPSC
- (multiprotocol serial controllers).
-
- Required properties:
- - compatible : "marvell,mv64360-brg"
- - reg : Offset and length of the register set for this device
- - clock-src : A value from 0 to 15 which selects the clock
- source for the baud rate generator. This value corresponds
- to the CLKS value in the BRGx configuration register. See
- the mv64x60 User's Manual.
- - clock-frequence : The frequency (in Hz) of the baud rate
- generator's input clock.
- - current-speed : The current speed setting (presumably by
- firmware) of the baud rate generator.
-
- Example Discovery BRG node:
- brg@b200 {
- compatible = "marvell,mv64360-brg";
- reg = <0xb200 0x8>;
- clock-src = <8>;
- clock-frequency = <133333333>;
- current-speed = <9600>;
- };
-
-
- f) Marvell Discovery CUNIT nodes
-
- Represent the Serial Communications Unit device hardware.
-
- Required properties:
- - reg : Offset and length of the register set for this device
-
- Example Discovery CUNIT node:
- cunit@f200 {
- reg = <0xf200 0x200>;
- };
-
-
- g) Marvell Discovery MPSCROUTING nodes
-
- Represent the Discovery's MPSC routing hardware
-
- Required properties:
- - reg : Offset and length of the register set for this device
-
- Example Discovery CUNIT node:
- mpscrouting@b500 {
- reg = <0xb400 0xc>;
- };
-
-
- h) Marvell Discovery MPSCINTR nodes
-
- Represent the Discovery's MPSC DMA interrupt hardware registers
- (SDMA cause and mask registers).
-
- Required properties:
- - reg : Offset and length of the register set for this device
-
- Example Discovery MPSCINTR node:
- mpsintr@b800 {
- reg = <0xb800 0x100>;
- };
-
-
- i) Marvell Discovery MPSC nodes
-
- Represent the Discovery's MPSC (Multiprotocol Serial Controller)
- serial port.
-
- Required properties:
- - device_type : "serial"
- - compatible : "marvell,mv64360-mpsc"
- - reg : Offset and length of the register set for this device
- - sdma : the phandle for the SDMA node used by this port
- - brg : the phandle for the BRG node used by this port
- - cunit : the phandle for the CUNIT node used by this port
- - mpscrouting : the phandle for the MPSCROUTING node used by this port
- - mpscintr : the phandle for the MPSCINTR node used by this port
- - cell-index : the hardware index of this cell in the MPSC core
- - max_idle : value needed for MPSC CHR3 (Maximum Frame Length)
- register
- - interrupts : <a> where a is the interrupt number for the MPSC.
- - interrupt-parent : the phandle for the interrupt controller
- that services interrupts for this device.
-
- Example Discovery MPSCINTR node:
- mpsc@8000 {
- device_type = "serial";
- compatible = "marvell,mv64360-mpsc";
- reg = <0x8000 0x38>;
- virtual-reg = <0xf1008000>;
- sdma = <&SDMA0>;
- brg = <&BRG0>;
- cunit = <&CUNIT>;
- mpscrouting = <&MPSCROUTING>;
- mpscintr = <&MPSCINTR>;
- cell-index = <0>;
- max_idle = <40>;
- interrupts = <40>;
- interrupt-parent = <&PIC>;
- };
-
-
- j) Marvell Discovery Watch Dog Timer nodes
-
- Represent the Discovery's watchdog timer hardware
-
- Required properties:
- - compatible : "marvell,mv64360-wdt"
- - reg : Offset and length of the register set for this device
-
- Example Discovery Watch Dog Timer node:
- wdt@b410 {
- compatible = "marvell,mv64360-wdt";
- reg = <0xb410 0x8>;
- };
-
-
- k) Marvell Discovery I2C nodes
-
- Represent the Discovery's I2C hardware
-
- Required properties:
- - device_type : "i2c"
- - compatible : "marvell,mv64360-i2c"
- - reg : Offset and length of the register set for this device
- - interrupts : <a> where a is the interrupt number for the I2C.
- - interrupt-parent : the phandle for the interrupt controller
- that services interrupts for this device.
-
- Example Discovery I2C node:
- compatible = "marvell,mv64360-i2c";
- reg = <0xc000 0x20>;
- virtual-reg = <0xf100c000>;
- interrupts = <37>;
- interrupt-parent = <&PIC>;
- };
-
-
- l) Marvell Discovery PIC (Programmable Interrupt Controller) nodes
-
- Represent the Discovery's PIC hardware
-
- Required properties:
- - #interrupt-cells : <1>
- - #address-cells : <0>
- - compatible : "marvell,mv64360-pic"
- - reg : Offset and length of the register set for this device
- - interrupt-controller
-
- Example Discovery PIC node:
- pic {
- #interrupt-cells = <1>;
- #address-cells = <0>;
- compatible = "marvell,mv64360-pic";
- reg = <0x0 0x88>;
- interrupt-controller;
- };
-
-
- m) Marvell Discovery MPP (Multipurpose Pins) multiplexing nodes
-
- Represent the Discovery's MPP hardware
-
- Required properties:
- - compatible : "marvell,mv64360-mpp"
- - reg : Offset and length of the register set for this device
-
- Example Discovery MPP node:
- mpp@f000 {
- compatible = "marvell,mv64360-mpp";
- reg = <0xf000 0x10>;
- };
-
-
- n) Marvell Discovery GPP (General Purpose Pins) nodes
-
- Represent the Discovery's GPP hardware
-
- Required properties:
- - compatible : "marvell,mv64360-gpp"
- - reg : Offset and length of the register set for this device
-
- Example Discovery GPP node:
- gpp@f000 {
- compatible = "marvell,mv64360-gpp";
- reg = <0xf100 0x20>;
- };
-
-
- o) Marvell Discovery PCI host bridge node
-
- Represents the Discovery's PCI host bridge device. The properties
- for this node conform to Rev 2.1 of the PCI Bus Binding to IEEE
- 1275-1994. A typical value for the compatible property is
- "marvell,mv64360-pci".
-
- Example Discovery PCI host bridge node
- pci@80000000 {
- #address-cells = <3>;
- #size-cells = <2>;
- #interrupt-cells = <1>;
- device_type = "pci";
- compatible = "marvell,mv64360-pci";
- reg = <0xcf8 0x8>;
- ranges = <0x01000000 0x0 0x0
- 0x88000000 0x0 0x01000000
- 0x02000000 0x0 0x80000000
- 0x80000000 0x0 0x08000000>;
- bus-range = <0 255>;
- clock-frequency = <66000000>;
- interrupt-parent = <&PIC>;
- interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
- interrupt-map = <
- /* IDSEL 0x0a */
- 0x5000 0 0 1 &PIC 80
- 0x5000 0 0 2 &PIC 81
- 0x5000 0 0 3 &PIC 91
- 0x5000 0 0 4 &PIC 93
-
- /* IDSEL 0x0b */
- 0x5800 0 0 1 &PIC 91
- 0x5800 0 0 2 &PIC 93
- 0x5800 0 0 3 &PIC 80
- 0x5800 0 0 4 &PIC 81
-
- /* IDSEL 0x0c */
- 0x6000 0 0 1 &PIC 91
- 0x6000 0 0 2 &PIC 93
- 0x6000 0 0 3 &PIC 80
- 0x6000 0 0 4 &PIC 81
-
- /* IDSEL 0x0d */
- 0x6800 0 0 1 &PIC 93
- 0x6800 0 0 2 &PIC 80
- 0x6800 0 0 3 &PIC 81
- 0x6800 0 0 4 &PIC 91
- >;
- };
-
-
- p) Marvell Discovery CPU Error nodes
-
- Represent the Discovery's CPU error handler device.
-
- Required properties:
- - compatible : "marvell,mv64360-cpu-error"
- - reg : Offset and length of the register set for this device
- - interrupts : the interrupt number for this device
- - interrupt-parent : the phandle for the interrupt controller
- that services interrupts for this device.
-
- Example Discovery CPU Error node:
- cpu-error@0070 {
- compatible = "marvell,mv64360-cpu-error";
- reg = <0x70 0x10 0x128 0x28>;
- interrupts = <3>;
- interrupt-parent = <&PIC>;
- };
-
-
- q) Marvell Discovery SRAM Controller nodes
-
- Represent the Discovery's SRAM controller device.
-
- Required properties:
- - compatible : "marvell,mv64360-sram-ctrl"
- - reg : Offset and length of the register set for this device
- - interrupts : the interrupt number for this device
- - interrupt-parent : the phandle for the interrupt controller
- that services interrupts for this device.
-
- Example Discovery SRAM Controller node:
- sram-ctrl@0380 {
- compatible = "marvell,mv64360-sram-ctrl";
- reg = <0x380 0x80>;
- interrupts = <13>;
- interrupt-parent = <&PIC>;
- };
-
-
- r) Marvell Discovery PCI Error Handler nodes
-
- Represent the Discovery's PCI error handler device.
-
- Required properties:
- - compatible : "marvell,mv64360-pci-error"
- - reg : Offset and length of the register set for this device
- - interrupts : the interrupt number for this device
- - interrupt-parent : the phandle for the interrupt controller
- that services interrupts for this device.
-
- Example Discovery PCI Error Handler node:
- pci-error@1d40 {
- compatible = "marvell,mv64360-pci-error";
- reg = <0x1d40 0x40 0xc28 0x4>;
- interrupts = <12>;
- interrupt-parent = <&PIC>;
- };
-
-
- s) Marvell Discovery Memory Controller nodes
-
- Represent the Discovery's memory controller device.
-
- Required properties:
- - compatible : "marvell,mv64360-mem-ctrl"
- - reg : Offset and length of the register set for this device
- - interrupts : the interrupt number for this device
- - interrupt-parent : the phandle for the interrupt controller
- that services interrupts for this device.
-
- Example Discovery Memory Controller node:
- mem-ctrl@1400 {
- compatible = "marvell,mv64360-mem-ctrl";
- reg = <0x1400 0x60>;
- interrupts = <17>;
- interrupt-parent = <&PIC>;
- };
-
-
-VIII - Specifying interrupt information for devices
+VII - Specifying interrupt information for devices
===================================================
The device tree represents the busses and devices of a hardware
@@ -2439,56 +1324,7 @@
2 = high to low edge sensitive type enabled
3 = low to high edge sensitive type enabled
-IX - Specifying GPIO information for devices
-============================================
-
-1) gpios property
------------------
-
-Nodes that makes use of GPIOs should define them using `gpios' property,
-format of which is: <&gpio-controller1-phandle gpio1-specifier
- &gpio-controller2-phandle gpio2-specifier
- 0 /* holes are permitted, means no GPIO 3 */
- &gpio-controller4-phandle gpio4-specifier
- ...>;
-
-Note that gpio-specifier length is controller dependent.
-
-gpio-specifier may encode: bank, pin position inside the bank,
-whether pin is open-drain and whether pin is logically inverted.
-
-Example of the node using GPIOs:
-
- node {
- gpios = <&qe_pio_e 18 0>;
- };
-
-In this example gpio-specifier is "18 0" and encodes GPIO pin number,
-and empty GPIO flags as accepted by the "qe_pio_e" gpio-controller.
-
-2) gpio-controller nodes
-------------------------
-
-Every GPIO controller node must have #gpio-cells property defined,
-this information will be used to translate gpio-specifiers.
-
-Example of two SOC GPIO banks defined as gpio-controller nodes:
-
- qe_pio_a: gpio-controller@1400 {
- #gpio-cells = <2>;
- compatible = "fsl,qe-pario-bank-a", "fsl,qe-pario-bank";
- reg = <0x1400 0x18>;
- gpio-controller;
- };
-
- qe_pio_e: gpio-controller@1460 {
- #gpio-cells = <2>;
- compatible = "fsl,qe-pario-bank-e", "fsl,qe-pario-bank";
- reg = <0x1460 0x18>;
- gpio-controller;
- };
-
-X - Specifying Device Power Management Information (sleep property)
+VIII - Specifying Device Power Management Information (sleep property)
===================================================================
Devices on SOCs often have mechanisms for placing devices into low-power
diff --git a/Documentation/powerpc/dts-bindings/4xx/emac.txt b/Documentation/powerpc/dts-bindings/4xx/emac.txt
new file mode 100644
index 0000000..2161334a
--- /dev/null
+++ b/Documentation/powerpc/dts-bindings/4xx/emac.txt
@@ -0,0 +1,148 @@
+ 4xx/Axon EMAC ethernet nodes
+
+ The EMAC ethernet controller in IBM and AMCC 4xx chips, and also
+ the Axon bridge. To operate this needs to interact with a ths
+ special McMAL DMA controller, and sometimes an RGMII or ZMII
+ interface. In addition to the nodes and properties described
+ below, the node for the OPB bus on which the EMAC sits must have a
+ correct clock-frequency property.
+
+ i) The EMAC node itself
+
+ Required properties:
+ - device_type : "network"
+
+ - compatible : compatible list, contains 2 entries, first is
+ "ibm,emac-CHIP" where CHIP is the host ASIC (440gx,
+ 405gp, Axon) and second is either "ibm,emac" or
+ "ibm,emac4". For Axon, thus, we have: "ibm,emac-axon",
+ "ibm,emac4"
+ - interrupts : <interrupt mapping for EMAC IRQ and WOL IRQ>
+ - interrupt-parent : optional, if needed for interrupt mapping
+ - reg : <registers mapping>
+ - local-mac-address : 6 bytes, MAC address
+ - mal-device : phandle of the associated McMAL node
+ - mal-tx-channel : 1 cell, index of the tx channel on McMAL associated
+ with this EMAC
+ - mal-rx-channel : 1 cell, index of the rx channel on McMAL associated
+ with this EMAC
+ - cell-index : 1 cell, hardware index of the EMAC cell on a given
+ ASIC (typically 0x0 and 0x1 for EMAC0 and EMAC1 on
+ each Axon chip)
+ - max-frame-size : 1 cell, maximum frame size supported in bytes
+ - rx-fifo-size : 1 cell, Rx fifo size in bytes for 10 and 100 Mb/sec
+ operations.
+ For Axon, 2048
+ - tx-fifo-size : 1 cell, Tx fifo size in bytes for 10 and 100 Mb/sec
+ operations.
+ For Axon, 2048.
+ - fifo-entry-size : 1 cell, size of a fifo entry (used to calculate
+ thresholds).
+ For Axon, 0x00000010
+ - mal-burst-size : 1 cell, MAL burst size (used to calculate thresholds)
+ in bytes.
+ For Axon, 0x00000100 (I think ...)
+ - phy-mode : string, mode of operations of the PHY interface.
+ Supported values are: "mii", "rmii", "smii", "rgmii",
+ "tbi", "gmii", rtbi", "sgmii".
+ For Axon on CAB, it is "rgmii"
+ - mdio-device : 1 cell, required iff using shared MDIO registers
+ (440EP). phandle of the EMAC to use to drive the
+ MDIO lines for the PHY used by this EMAC.
+ - zmii-device : 1 cell, required iff connected to a ZMII. phandle of
+ the ZMII device node
+ - zmii-channel : 1 cell, required iff connected to a ZMII. Which ZMII
+ channel or 0xffffffff if ZMII is only used for MDIO.
+ - rgmii-device : 1 cell, required iff connected to an RGMII. phandle
+ of the RGMII device node.
+ For Axon: phandle of plb5/plb4/opb/rgmii
+ - rgmii-channel : 1 cell, required iff connected to an RGMII. Which
+ RGMII channel is used by this EMAC.
+ Fox Axon: present, whatever value is appropriate for each
+ EMAC, that is the content of the current (bogus) "phy-port"
+ property.
+
+ Optional properties:
+ - phy-address : 1 cell, optional, MDIO address of the PHY. If absent,
+ a search is performed.
+ - phy-map : 1 cell, optional, bitmap of addresses to probe the PHY
+ for, used if phy-address is absent. bit 0x00000001 is
+ MDIO address 0.
+ For Axon it can be absent, though my current driver
+ doesn't handle phy-address yet so for now, keep
+ 0x00ffffff in it.
+ - rx-fifo-size-gige : 1 cell, Rx fifo size in bytes for 1000 Mb/sec
+ operations (if absent the value is the same as
+ rx-fifo-size). For Axon, either absent or 2048.
+ - tx-fifo-size-gige : 1 cell, Tx fifo size in bytes for 1000 Mb/sec
+ operations (if absent the value is the same as
+ tx-fifo-size). For Axon, either absent or 2048.
+ - tah-device : 1 cell, optional. If connected to a TAH engine for
+ offload, phandle of the TAH device node.
+ - tah-channel : 1 cell, optional. If appropriate, channel used on the
+ TAH engine.
+
+ Example:
+
+ EMAC0: ethernet@40000800 {
+ device_type = "network";
+ compatible = "ibm,emac-440gp", "ibm,emac";
+ interrupt-parent = <&UIC1>;
+ interrupts = <1c 4 1d 4>;
+ reg = <40000800 70>;
+ local-mac-address = [00 04 AC E3 1B 1E];
+ mal-device = <&MAL0>;
+ mal-tx-channel = <0 1>;
+ mal-rx-channel = <0>;
+ cell-index = <0>;
+ max-frame-size = <5dc>;
+ rx-fifo-size = <1000>;
+ tx-fifo-size = <800>;
+ phy-mode = "rmii";
+ phy-map = <00000001>;
+ zmii-device = <&ZMII0>;
+ zmii-channel = <0>;
+ };
+
+ ii) McMAL node
+
+ Required properties:
+ - device_type : "dma-controller"
+ - compatible : compatible list, containing 2 entries, first is
+ "ibm,mcmal-CHIP" where CHIP is the host ASIC (like
+ emac) and the second is either "ibm,mcmal" or
+ "ibm,mcmal2".
+ For Axon, "ibm,mcmal-axon","ibm,mcmal2"
+ - interrupts : <interrupt mapping for the MAL interrupts sources:
+ 5 sources: tx_eob, rx_eob, serr, txde, rxde>.
+ For Axon: This is _different_ from the current
+ firmware. We use the "delayed" interrupts for txeob
+ and rxeob. Thus we end up with mapping those 5 MPIC
+ interrupts, all level positive sensitive: 10, 11, 32,
+ 33, 34 (in decimal)
+ - dcr-reg : < DCR registers range >
+ - dcr-parent : if needed for dcr-reg
+ - num-tx-chans : 1 cell, number of Tx channels
+ - num-rx-chans : 1 cell, number of Rx channels
+
+ iii) ZMII node
+
+ Required properties:
+ - compatible : compatible list, containing 2 entries, first is
+ "ibm,zmii-CHIP" where CHIP is the host ASIC (like
+ EMAC) and the second is "ibm,zmii".
+ For Axon, there is no ZMII node.
+ - reg : <registers mapping>
+
+ iv) RGMII node
+
+ Required properties:
+ - compatible : compatible list, containing 2 entries, first is
+ "ibm,rgmii-CHIP" where CHIP is the host ASIC (like
+ EMAC) and the second is "ibm,rgmii".
+ For Axon, "ibm,rgmii-axon","ibm,rgmii"
+ - reg : <registers mapping>
+ - revision : as provided by the RGMII new version register if
+ available.
+ For Axon: 0x0000012a
+
diff --git a/Documentation/powerpc/dts-bindings/gpio/gpio.txt b/Documentation/powerpc/dts-bindings/gpio/gpio.txt
new file mode 100644
index 0000000..edaa84d
--- /dev/null
+++ b/Documentation/powerpc/dts-bindings/gpio/gpio.txt
@@ -0,0 +1,50 @@
+Specifying GPIO information for devices
+============================================
+
+1) gpios property
+-----------------
+
+Nodes that makes use of GPIOs should define them using `gpios' property,
+format of which is: <&gpio-controller1-phandle gpio1-specifier
+ &gpio-controller2-phandle gpio2-specifier
+ 0 /* holes are permitted, means no GPIO 3 */
+ &gpio-controller4-phandle gpio4-specifier
+ ...>;
+
+Note that gpio-specifier length is controller dependent.
+
+gpio-specifier may encode: bank, pin position inside the bank,
+whether pin is open-drain and whether pin is logically inverted.
+
+Example of the node using GPIOs:
+
+ node {
+ gpios = <&qe_pio_e 18 0>;
+ };
+
+In this example gpio-specifier is "18 0" and encodes GPIO pin number,
+and empty GPIO flags as accepted by the "qe_pio_e" gpio-controller.
+
+2) gpio-controller nodes
+------------------------
+
+Every GPIO controller node must have #gpio-cells property defined,
+this information will be used to translate gpio-specifiers.
+
+Example of two SOC GPIO banks defined as gpio-controller nodes:
+
+ qe_pio_a: gpio-controller@1400 {
+ #gpio-cells = <2>;
+ compatible = "fsl,qe-pario-bank-a", "fsl,qe-pario-bank";
+ reg = <0x1400 0x18>;
+ gpio-controller;
+ };
+
+ qe_pio_e: gpio-controller@1460 {
+ #gpio-cells = <2>;
+ compatible = "fsl,qe-pario-bank-e", "fsl,qe-pario-bank";
+ reg = <0x1460 0x18>;
+ gpio-controller;
+ };
+
+
diff --git a/Documentation/powerpc/dts-bindings/gpio/led.txt b/Documentation/powerpc/dts-bindings/gpio/led.txt
index 4fe14de..064db92 100644
--- a/Documentation/powerpc/dts-bindings/gpio/led.txt
+++ b/Documentation/powerpc/dts-bindings/gpio/led.txt
@@ -16,10 +16,17 @@
string defining the trigger assigned to the LED. Current triggers are:
"backlight" - LED will act as a back-light, controlled by the framebuffer
system
- "default-on" - LED will turn on
+ "default-on" - LED will turn on, but see "default-state" below
"heartbeat" - LED "double" flashes at a load average based rate
"ide-disk" - LED indicates disk activity
"timer" - LED flashes at a fixed, configurable rate
+- default-state: (optional) The initial state of the LED. Valid
+ values are "on", "off", and "keep". If the LED is already on or off
+ and the default-state property is set the to same value, then no
+ glitch should be produced where the LED momentarily turns off (or
+ on). The "keep" setting will keep the LED at whatever its current
+ state is, without producing a glitch. The default is off if this
+ property is not present.
Examples:
@@ -30,14 +37,22 @@
gpios = <&mcu_pio 0 1>; /* Active low */
linux,default-trigger = "ide-disk";
};
+
+ fault {
+ gpios = <&mcu_pio 1 0>;
+ /* Keep LED on if BIOS detected hardware fault */
+ default-state = "keep";
+ };
};
run-control {
compatible = "gpio-leds";
red {
gpios = <&mpc8572 6 0>;
+ default-state = "off";
};
green {
gpios = <&mpc8572 7 0>;
+ default-state = "on";
};
}
diff --git a/Documentation/powerpc/dts-bindings/gpio/mdio.txt b/Documentation/powerpc/dts-bindings/gpio/mdio.txt
new file mode 100644
index 0000000..bc954952
--- /dev/null
+++ b/Documentation/powerpc/dts-bindings/gpio/mdio.txt
@@ -0,0 +1,19 @@
+MDIO on GPIOs
+
+Currently defined compatibles:
+- virtual,gpio-mdio
+
+MDC and MDIO lines connected to GPIO controllers are listed in the
+gpios property as described in section VIII.1 in the following order:
+
+MDC, MDIO.
+
+Example:
+
+mdio {
+ compatible = "virtual,mdio-gpio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ gpios = <&qe_pio_a 11
+ &qe_pio_c 6>;
+};
diff --git a/Documentation/powerpc/dts-bindings/marvell.txt b/Documentation/powerpc/dts-bindings/marvell.txt
new file mode 100644
index 0000000..3708a2f
--- /dev/null
+++ b/Documentation/powerpc/dts-bindings/marvell.txt
@@ -0,0 +1,521 @@
+Marvell Discovery mv64[345]6x System Controller chips
+===========================================================
+
+The Marvell mv64[345]60 series of system controller chips contain
+many of the peripherals needed to implement a complete computer
+system. In this section, we define device tree nodes to describe
+the system controller chip itself and each of the peripherals
+which it contains. Compatible string values for each node are
+prefixed with the string "marvell,", for Marvell Technology Group Ltd.
+
+1) The /system-controller node
+
+ This node is used to represent the system-controller and must be
+ present when the system uses a system controller chip. The top-level
+ system-controller node contains information that is global to all
+ devices within the system controller chip. The node name begins
+ with "system-controller" followed by the unit address, which is
+ the base address of the memory-mapped register set for the system
+ controller chip.
+
+ Required properties:
+
+ - ranges : Describes the translation of system controller addresses
+ for memory mapped registers.
+ - clock-frequency: Contains the main clock frequency for the system
+ controller chip.
+ - reg : This property defines the address and size of the
+ memory-mapped registers contained within the system controller
+ chip. The address specified in the "reg" property should match
+ the unit address of the system-controller node.
+ - #address-cells : Address representation for system controller
+ devices. This field represents the number of cells needed to
+ represent the address of the memory-mapped registers of devices
+ within the system controller chip.
+ - #size-cells : Size representation for for the memory-mapped
+ registers within the system controller chip.
+ - #interrupt-cells : Defines the width of cells used to represent
+ interrupts.
+
+ Optional properties:
+
+ - model : The specific model of the system controller chip. Such
+ as, "mv64360", "mv64460", or "mv64560".
+ - compatible : A string identifying the compatibility identifiers
+ of the system controller chip.
+
+ The system-controller node contains child nodes for each system
+ controller device that the platform uses. Nodes should not be created
+ for devices which exist on the system controller chip but are not used
+
+ Example Marvell Discovery mv64360 system-controller node:
+
+ system-controller@f1000000 { /* Marvell Discovery mv64360 */
+ #address-cells = <1>;
+ #size-cells = <1>;
+ model = "mv64360"; /* Default */
+ compatible = "marvell,mv64360";
+ clock-frequency = <133333333>;
+ reg = <0xf1000000 0x10000>;
+ virtual-reg = <0xf1000000>;
+ ranges = <0x88000000 0x88000000 0x1000000 /* PCI 0 I/O Space */
+ 0x80000000 0x80000000 0x8000000 /* PCI 0 MEM Space */
+ 0xa0000000 0xa0000000 0x4000000 /* User FLASH */
+ 0x00000000 0xf1000000 0x0010000 /* Bridge's regs */
+ 0xf2000000 0xf2000000 0x0040000>;/* Integrated SRAM */
+
+ [ child node definitions... ]
+ }
+
+2) Child nodes of /system-controller
+
+ a) Marvell Discovery MDIO bus
+
+ The MDIO is a bus to which the PHY devices are connected. For each
+ device that exists on this bus, a child node should be created. See
+ the definition of the PHY node below for an example of how to define
+ a PHY.
+
+ Required properties:
+ - #address-cells : Should be <1>
+ - #size-cells : Should be <0>
+ - device_type : Should be "mdio"
+ - compatible : Should be "marvell,mv64360-mdio"
+
+ Example:
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ device_type = "mdio";
+ compatible = "marvell,mv64360-mdio";
+
+ ethernet-phy@0 {
+ ......
+ };
+ };
+
+
+ b) Marvell Discovery ethernet controller
+
+ The Discover ethernet controller is described with two levels
+ of nodes. The first level describes an ethernet silicon block
+ and the second level describes up to 3 ethernet nodes within
+ that block. The reason for the multiple levels is that the
+ registers for the node are interleaved within a single set
+ of registers. The "ethernet-block" level describes the
+ shared register set, and the "ethernet" nodes describe ethernet
+ port-specific properties.
+
+ Ethernet block node
+
+ Required properties:
+ - #address-cells : <1>
+ - #size-cells : <0>
+ - compatible : "marvell,mv64360-eth-block"
+ - reg : Offset and length of the register set for this block
+
+ Example Discovery Ethernet block node:
+ ethernet-block@2000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "marvell,mv64360-eth-block";
+ reg = <0x2000 0x2000>;
+ ethernet@0 {
+ .......
+ };
+ };
+
+ Ethernet port node
+
+ Required properties:
+ - device_type : Should be "network".
+ - compatible : Should be "marvell,mv64360-eth".
+ - reg : Should be <0>, <1>, or <2>, according to which registers
+ within the silicon block the device uses.
+ - interrupts : <a> where a is the interrupt number for the port.
+ - interrupt-parent : the phandle for the interrupt controller
+ that services interrupts for this device.
+ - phy : the phandle for the PHY connected to this ethernet
+ controller.
+ - local-mac-address : 6 bytes, MAC address
+
+ Example Discovery Ethernet port node:
+ ethernet@0 {
+ device_type = "network";
+ compatible = "marvell,mv64360-eth";
+ reg = <0>;
+ interrupts = <32>;
+ interrupt-parent = <&PIC>;
+ phy = <&PHY0>;
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ };
+
+
+
+ c) Marvell Discovery PHY nodes
+
+ Required properties:
+ - device_type : Should be "ethernet-phy"
+ - interrupts : <a> where a is the interrupt number for this phy.
+ - interrupt-parent : the phandle for the interrupt controller that
+ services interrupts for this device.
+ - reg : The ID number for the phy, usually a small integer
+
+ Example Discovery PHY node:
+ ethernet-phy@1 {
+ device_type = "ethernet-phy";
+ compatible = "broadcom,bcm5421";
+ interrupts = <76>; /* GPP 12 */
+ interrupt-parent = <&PIC>;
+ reg = <1>;
+ };
+
+
+ d) Marvell Discovery SDMA nodes
+
+ Represent DMA hardware associated with the MPSC (multiprotocol
+ serial controllers).
+
+ Required properties:
+ - compatible : "marvell,mv64360-sdma"
+ - reg : Offset and length of the register set for this device
+ - interrupts : <a> where a is the interrupt number for the DMA
+ device.
+ - interrupt-parent : the phandle for the interrupt controller
+ that services interrupts for this device.
+
+ Example Discovery SDMA node:
+ sdma@4000 {
+ compatible = "marvell,mv64360-sdma";
+ reg = <0x4000 0xc18>;
+ virtual-reg = <0xf1004000>;
+ interrupts = <36>;
+ interrupt-parent = <&PIC>;
+ };
+
+
+ e) Marvell Discovery BRG nodes
+
+ Represent baud rate generator hardware associated with the MPSC
+ (multiprotocol serial controllers).
+
+ Required properties:
+ - compatible : "marvell,mv64360-brg"
+ - reg : Offset and length of the register set for this device
+ - clock-src : A value from 0 to 15 which selects the clock
+ source for the baud rate generator. This value corresponds
+ to the CLKS value in the BRGx configuration register. See
+ the mv64x60 User's Manual.
+ - clock-frequence : The frequency (in Hz) of the baud rate
+ generator's input clock.
+ - current-speed : The current speed setting (presumably by
+ firmware) of the baud rate generator.
+
+ Example Discovery BRG node:
+ brg@b200 {
+ compatible = "marvell,mv64360-brg";
+ reg = <0xb200 0x8>;
+ clock-src = <8>;
+ clock-frequency = <133333333>;
+ current-speed = <9600>;
+ };
+
+
+ f) Marvell Discovery CUNIT nodes
+
+ Represent the Serial Communications Unit device hardware.
+
+ Required properties:
+ - reg : Offset and length of the register set for this device
+
+ Example Discovery CUNIT node:
+ cunit@f200 {
+ reg = <0xf200 0x200>;
+ };
+
+
+ g) Marvell Discovery MPSCROUTING nodes
+
+ Represent the Discovery's MPSC routing hardware
+
+ Required properties:
+ - reg : Offset and length of the register set for this device
+
+ Example Discovery CUNIT node:
+ mpscrouting@b500 {
+ reg = <0xb400 0xc>;
+ };
+
+
+ h) Marvell Discovery MPSCINTR nodes
+
+ Represent the Discovery's MPSC DMA interrupt hardware registers
+ (SDMA cause and mask registers).
+
+ Required properties:
+ - reg : Offset and length of the register set for this device
+
+ Example Discovery MPSCINTR node:
+ mpsintr@b800 {
+ reg = <0xb800 0x100>;
+ };
+
+
+ i) Marvell Discovery MPSC nodes
+
+ Represent the Discovery's MPSC (Multiprotocol Serial Controller)
+ serial port.
+
+ Required properties:
+ - device_type : "serial"
+ - compatible : "marvell,mv64360-mpsc"
+ - reg : Offset and length of the register set for this device
+ - sdma : the phandle for the SDMA node used by this port
+ - brg : the phandle for the BRG node used by this port
+ - cunit : the phandle for the CUNIT node used by this port
+ - mpscrouting : the phandle for the MPSCROUTING node used by this port
+ - mpscintr : the phandle for the MPSCINTR node used by this port
+ - cell-index : the hardware index of this cell in the MPSC core
+ - max_idle : value needed for MPSC CHR3 (Maximum Frame Length)
+ register
+ - interrupts : <a> where a is the interrupt number for the MPSC.
+ - interrupt-parent : the phandle for the interrupt controller
+ that services interrupts for this device.
+
+ Example Discovery MPSCINTR node:
+ mpsc@8000 {
+ device_type = "serial";
+ compatible = "marvell,mv64360-mpsc";
+ reg = <0x8000 0x38>;
+ virtual-reg = <0xf1008000>;
+ sdma = <&SDMA0>;
+ brg = <&BRG0>;
+ cunit = <&CUNIT>;
+ mpscrouting = <&MPSCROUTING>;
+ mpscintr = <&MPSCINTR>;
+ cell-index = <0>;
+ max_idle = <40>;
+ interrupts = <40>;
+ interrupt-parent = <&PIC>;
+ };
+
+
+ j) Marvell Discovery Watch Dog Timer nodes
+
+ Represent the Discovery's watchdog timer hardware
+
+ Required properties:
+ - compatible : "marvell,mv64360-wdt"
+ - reg : Offset and length of the register set for this device
+
+ Example Discovery Watch Dog Timer node:
+ wdt@b410 {
+ compatible = "marvell,mv64360-wdt";
+ reg = <0xb410 0x8>;
+ };
+
+
+ k) Marvell Discovery I2C nodes
+
+ Represent the Discovery's I2C hardware
+
+ Required properties:
+ - device_type : "i2c"
+ - compatible : "marvell,mv64360-i2c"
+ - reg : Offset and length of the register set for this device
+ - interrupts : <a> where a is the interrupt number for the I2C.
+ - interrupt-parent : the phandle for the interrupt controller
+ that services interrupts for this device.
+
+ Example Discovery I2C node:
+ compatible = "marvell,mv64360-i2c";
+ reg = <0xc000 0x20>;
+ virtual-reg = <0xf100c000>;
+ interrupts = <37>;
+ interrupt-parent = <&PIC>;
+ };
+
+
+ l) Marvell Discovery PIC (Programmable Interrupt Controller) nodes
+
+ Represent the Discovery's PIC hardware
+
+ Required properties:
+ - #interrupt-cells : <1>
+ - #address-cells : <0>
+ - compatible : "marvell,mv64360-pic"
+ - reg : Offset and length of the register set for this device
+ - interrupt-controller
+
+ Example Discovery PIC node:
+ pic {
+ #interrupt-cells = <1>;
+ #address-cells = <0>;
+ compatible = "marvell,mv64360-pic";
+ reg = <0x0 0x88>;
+ interrupt-controller;
+ };
+
+
+ m) Marvell Discovery MPP (Multipurpose Pins) multiplexing nodes
+
+ Represent the Discovery's MPP hardware
+
+ Required properties:
+ - compatible : "marvell,mv64360-mpp"
+ - reg : Offset and length of the register set for this device
+
+ Example Discovery MPP node:
+ mpp@f000 {
+ compatible = "marvell,mv64360-mpp";
+ reg = <0xf000 0x10>;
+ };
+
+
+ n) Marvell Discovery GPP (General Purpose Pins) nodes
+
+ Represent the Discovery's GPP hardware
+
+ Required properties:
+ - compatible : "marvell,mv64360-gpp"
+ - reg : Offset and length of the register set for this device
+
+ Example Discovery GPP node:
+ gpp@f000 {
+ compatible = "marvell,mv64360-gpp";
+ reg = <0xf100 0x20>;
+ };
+
+
+ o) Marvell Discovery PCI host bridge node
+
+ Represents the Discovery's PCI host bridge device. The properties
+ for this node conform to Rev 2.1 of the PCI Bus Binding to IEEE
+ 1275-1994. A typical value for the compatible property is
+ "marvell,mv64360-pci".
+
+ Example Discovery PCI host bridge node
+ pci@80000000 {
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ device_type = "pci";
+ compatible = "marvell,mv64360-pci";
+ reg = <0xcf8 0x8>;
+ ranges = <0x01000000 0x0 0x0
+ 0x88000000 0x0 0x01000000
+ 0x02000000 0x0 0x80000000
+ 0x80000000 0x0 0x08000000>;
+ bus-range = <0 255>;
+ clock-frequency = <66000000>;
+ interrupt-parent = <&PIC>;
+ interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+ interrupt-map = <
+ /* IDSEL 0x0a */
+ 0x5000 0 0 1 &PIC 80
+ 0x5000 0 0 2 &PIC 81
+ 0x5000 0 0 3 &PIC 91
+ 0x5000 0 0 4 &PIC 93
+
+ /* IDSEL 0x0b */
+ 0x5800 0 0 1 &PIC 91
+ 0x5800 0 0 2 &PIC 93
+ 0x5800 0 0 3 &PIC 80
+ 0x5800 0 0 4 &PIC 81
+
+ /* IDSEL 0x0c */
+ 0x6000 0 0 1 &PIC 91
+ 0x6000 0 0 2 &PIC 93
+ 0x6000 0 0 3 &PIC 80
+ 0x6000 0 0 4 &PIC 81
+
+ /* IDSEL 0x0d */
+ 0x6800 0 0 1 &PIC 93
+ 0x6800 0 0 2 &PIC 80
+ 0x6800 0 0 3 &PIC 81
+ 0x6800 0 0 4 &PIC 91
+ >;
+ };
+
+
+ p) Marvell Discovery CPU Error nodes
+
+ Represent the Discovery's CPU error handler device.
+
+ Required properties:
+ - compatible : "marvell,mv64360-cpu-error"
+ - reg : Offset and length of the register set for this device
+ - interrupts : the interrupt number for this device
+ - interrupt-parent : the phandle for the interrupt controller
+ that services interrupts for this device.
+
+ Example Discovery CPU Error node:
+ cpu-error@0070 {
+ compatible = "marvell,mv64360-cpu-error";
+ reg = <0x70 0x10 0x128 0x28>;
+ interrupts = <3>;
+ interrupt-parent = <&PIC>;
+ };
+
+
+ q) Marvell Discovery SRAM Controller nodes
+
+ Represent the Discovery's SRAM controller device.
+
+ Required properties:
+ - compatible : "marvell,mv64360-sram-ctrl"
+ - reg : Offset and length of the register set for this device
+ - interrupts : the interrupt number for this device
+ - interrupt-parent : the phandle for the interrupt controller
+ that services interrupts for this device.
+
+ Example Discovery SRAM Controller node:
+ sram-ctrl@0380 {
+ compatible = "marvell,mv64360-sram-ctrl";
+ reg = <0x380 0x80>;
+ interrupts = <13>;
+ interrupt-parent = <&PIC>;
+ };
+
+
+ r) Marvell Discovery PCI Error Handler nodes
+
+ Represent the Discovery's PCI error handler device.
+
+ Required properties:
+ - compatible : "marvell,mv64360-pci-error"
+ - reg : Offset and length of the register set for this device
+ - interrupts : the interrupt number for this device
+ - interrupt-parent : the phandle for the interrupt controller
+ that services interrupts for this device.
+
+ Example Discovery PCI Error Handler node:
+ pci-error@1d40 {
+ compatible = "marvell,mv64360-pci-error";
+ reg = <0x1d40 0x40 0xc28 0x4>;
+ interrupts = <12>;
+ interrupt-parent = <&PIC>;
+ };
+
+
+ s) Marvell Discovery Memory Controller nodes
+
+ Represent the Discovery's memory controller device.
+
+ Required properties:
+ - compatible : "marvell,mv64360-mem-ctrl"
+ - reg : Offset and length of the register set for this device
+ - interrupts : the interrupt number for this device
+ - interrupt-parent : the phandle for the interrupt controller
+ that services interrupts for this device.
+
+ Example Discovery Memory Controller node:
+ mem-ctrl@1400 {
+ compatible = "marvell,mv64360-mem-ctrl";
+ reg = <0x1400 0x60>;
+ interrupts = <17>;
+ interrupt-parent = <&PIC>;
+ };
+
+
diff --git a/Documentation/powerpc/dts-bindings/phy.txt b/Documentation/powerpc/dts-bindings/phy.txt
new file mode 100644
index 0000000..bb8c742
--- /dev/null
+++ b/Documentation/powerpc/dts-bindings/phy.txt
@@ -0,0 +1,25 @@
+PHY nodes
+
+Required properties:
+
+ - device_type : Should be "ethernet-phy"
+ - interrupts : <a b> where a is the interrupt number and b is a
+ field that represents an encoding of the sense and level
+ information for the interrupt. This should be encoded based on
+ the information in section 2) depending on the type of interrupt
+ controller you have.
+ - interrupt-parent : the phandle for the interrupt controller that
+ services interrupts for this device.
+ - reg : The ID number for the phy, usually a small integer
+ - linux,phandle : phandle for this node; likely referenced by an
+ ethernet controller node.
+
+Example:
+
+ethernet-phy@0 {
+ linux,phandle = <2452000>
+ interrupt-parent = <40000>;
+ interrupts = <35 1>;
+ reg = <0>;
+ device_type = "ethernet-phy";
+};
diff --git a/Documentation/powerpc/dts-bindings/spi-bus.txt b/Documentation/powerpc/dts-bindings/spi-bus.txt
new file mode 100644
index 0000000..e782add
--- /dev/null
+++ b/Documentation/powerpc/dts-bindings/spi-bus.txt
@@ -0,0 +1,57 @@
+SPI (Serial Peripheral Interface) busses
+
+SPI busses can be described with a node for the SPI master device
+and a set of child nodes for each SPI slave on the bus. For this
+discussion, it is assumed that the system's SPI controller is in
+SPI master mode. This binding does not describe SPI controllers
+in slave mode.
+
+The SPI master node requires the following properties:
+- #address-cells - number of cells required to define a chip select
+ address on the SPI bus.
+- #size-cells - should be zero.
+- compatible - name of SPI bus controller following generic names
+ recommended practice.
+No other properties are required in the SPI bus node. It is assumed
+that a driver for an SPI bus device will understand that it is an SPI bus.
+However, the binding does not attempt to define the specific method for
+assigning chip select numbers. Since SPI chip select configuration is
+flexible and non-standardized, it is left out of this binding with the
+assumption that board specific platform code will be used to manage
+chip selects. Individual drivers can define additional properties to
+support describing the chip select layout.
+
+SPI slave nodes must be children of the SPI master node and can
+contain the following properties.
+- reg - (required) chip select address of device.
+- compatible - (required) name of SPI device following generic names
+ recommended practice
+- spi-max-frequency - (required) Maximum SPI clocking speed of device in Hz
+- spi-cpol - (optional) Empty property indicating device requires
+ inverse clock polarity (CPOL) mode
+- spi-cpha - (optional) Empty property indicating device requires
+ shifted clock phase (CPHA) mode
+- spi-cs-high - (optional) Empty property indicating device requires
+ chip select active high
+
+SPI example for an MPC5200 SPI bus:
+ spi@f00 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,mpc5200b-spi","fsl,mpc5200-spi";
+ reg = <0xf00 0x20>;
+ interrupts = <2 13 0 2 14 0>;
+ interrupt-parent = <&mpc5200_pic>;
+
+ ethernet-switch@0 {
+ compatible = "micrel,ks8995m";
+ spi-max-frequency = <1000000>;
+ reg = <0>;
+ };
+
+ codec@1 {
+ compatible = "ti,tlv320aic26";
+ spi-max-frequency = <100000>;
+ reg = <1>;
+ };
+ };
diff --git a/Documentation/powerpc/dts-bindings/usb-ehci.txt b/Documentation/powerpc/dts-bindings/usb-ehci.txt
new file mode 100644
index 0000000..fa18612
--- /dev/null
+++ b/Documentation/powerpc/dts-bindings/usb-ehci.txt
@@ -0,0 +1,25 @@
+USB EHCI controllers
+
+Required properties:
+ - compatible : should be "usb-ehci".
+ - reg : should contain at least address and length of the standard EHCI
+ register set for the device. Optional platform-dependent registers
+ (debug-port or other) can be also specified here, but only after
+ definition of standard EHCI registers.
+ - interrupts : one EHCI interrupt should be described here.
+If device registers are implemented in big endian mode, the device
+node should have "big-endian-regs" property.
+If controller implementation operates with big endian descriptors,
+"big-endian-desc" property should be specified.
+If both big endian registers and descriptors are used by the controller
+implementation, "big-endian" property can be specified instead of having
+both "big-endian-regs" and "big-endian-desc".
+
+Example (Sequoia 440EPx):
+ ehci@e0000300 {
+ compatible = "ibm,usb-ehci-440epx", "usb-ehci";
+ interrupt-parent = <&UIC0>;
+ interrupts = <1a 4>;
+ reg = <0 e0000300 90 0 e0000390 70>;
+ big-endian;
+ };
diff --git a/Documentation/powerpc/dts-bindings/xilinx.txt b/Documentation/powerpc/dts-bindings/xilinx.txt
new file mode 100644
index 0000000..80339fe
--- /dev/null
+++ b/Documentation/powerpc/dts-bindings/xilinx.txt
@@ -0,0 +1,295 @@
+ d) Xilinx IP cores
+
+ The Xilinx EDK toolchain ships with a set of IP cores (devices) for use
+ in Xilinx Spartan and Virtex FPGAs. The devices cover the whole range
+ of standard device types (network, serial, etc.) and miscellaneous
+ devices (gpio, LCD, spi, etc). Also, since these devices are
+ implemented within the fpga fabric every instance of the device can be
+ synthesised with different options that change the behaviour.
+
+ Each IP-core has a set of parameters which the FPGA designer can use to
+ control how the core is synthesized. Historically, the EDK tool would
+ extract the device parameters relevant to device drivers and copy them
+ into an 'xparameters.h' in the form of #define symbols. This tells the
+ device drivers how the IP cores are configured, but it requres the kernel
+ to be recompiled every time the FPGA bitstream is resynthesized.
+
+ The new approach is to export the parameters into the device tree and
+ generate a new device tree each time the FPGA bitstream changes. The
+ parameters which used to be exported as #defines will now become
+ properties of the device node. In general, device nodes for IP-cores
+ will take the following form:
+
+ (name): (generic-name)@(base-address) {
+ compatible = "xlnx,(ip-core-name)-(HW_VER)"
+ [, (list of compatible devices), ...];
+ reg = <(baseaddr) (size)>;
+ interrupt-parent = <&interrupt-controller-phandle>;
+ interrupts = < ... >;
+ xlnx,(parameter1) = "(string-value)";
+ xlnx,(parameter2) = <(int-value)>;
+ };
+
+ (generic-name): an open firmware-style name that describes the
+ generic class of device. Preferably, this is one word, such
+ as 'serial' or 'ethernet'.
+ (ip-core-name): the name of the ip block (given after the BEGIN
+ directive in system.mhs). Should be in lowercase
+ and all underscores '_' converted to dashes '-'.
+ (name): is derived from the "PARAMETER INSTANCE" value.
+ (parameter#): C_* parameters from system.mhs. The C_ prefix is
+ dropped from the parameter name, the name is converted
+ to lowercase and all underscore '_' characters are
+ converted to dashes '-'.
+ (baseaddr): the baseaddr parameter value (often named C_BASEADDR).
+ (HW_VER): from the HW_VER parameter.
+ (size): the address range size (often C_HIGHADDR - C_BASEADDR + 1).
+
+ Typically, the compatible list will include the exact IP core version
+ followed by an older IP core version which implements the same
+ interface or any other device with the same interface.
+
+ 'reg', 'interrupt-parent' and 'interrupts' are all optional properties.
+
+ For example, the following block from system.mhs:
+
+ BEGIN opb_uartlite
+ PARAMETER INSTANCE = opb_uartlite_0
+ PARAMETER HW_VER = 1.00.b
+ PARAMETER C_BAUDRATE = 115200
+ PARAMETER C_DATA_BITS = 8
+ PARAMETER C_ODD_PARITY = 0
+ PARAMETER C_USE_PARITY = 0
+ PARAMETER C_CLK_FREQ = 50000000
+ PARAMETER C_BASEADDR = 0xEC100000
+ PARAMETER C_HIGHADDR = 0xEC10FFFF
+ BUS_INTERFACE SOPB = opb_7
+ PORT OPB_Clk = CLK_50MHz
+ PORT Interrupt = opb_uartlite_0_Interrupt
+ PORT RX = opb_uartlite_0_RX
+ PORT TX = opb_uartlite_0_TX
+ PORT OPB_Rst = sys_bus_reset_0
+ END
+
+ becomes the following device tree node:
+
+ opb_uartlite_0: serial@ec100000 {
+ device_type = "serial";
+ compatible = "xlnx,opb-uartlite-1.00.b";
+ reg = <ec100000 10000>;
+ interrupt-parent = <&opb_intc_0>;
+ interrupts = <1 0>; // got this from the opb_intc parameters
+ current-speed = <d#115200>; // standard serial device prop
+ clock-frequency = <d#50000000>; // standard serial device prop
+ xlnx,data-bits = <8>;
+ xlnx,odd-parity = <0>;
+ xlnx,use-parity = <0>;
+ };
+
+ Some IP cores actually implement 2 or more logical devices. In
+ this case, the device should still describe the whole IP core with
+ a single node and add a child node for each logical device. The
+ ranges property can be used to translate from parent IP-core to the
+ registers of each device. In addition, the parent node should be
+ compatible with the bus type 'xlnx,compound', and should contain
+ #address-cells and #size-cells, as with any other bus. (Note: this
+ makes the assumption that both logical devices have the same bus
+ binding. If this is not true, then separate nodes should be used
+ for each logical device). The 'cell-index' property can be used to
+ enumerate logical devices within an IP core. For example, the
+ following is the system.mhs entry for the dual ps2 controller found
+ on the ml403 reference design.
+
+ BEGIN opb_ps2_dual_ref
+ PARAMETER INSTANCE = opb_ps2_dual_ref_0
+ PARAMETER HW_VER = 1.00.a
+ PARAMETER C_BASEADDR = 0xA9000000
+ PARAMETER C_HIGHADDR = 0xA9001FFF
+ BUS_INTERFACE SOPB = opb_v20_0
+ PORT Sys_Intr1 = ps2_1_intr
+ PORT Sys_Intr2 = ps2_2_intr
+ PORT Clkin1 = ps2_clk_rx_1
+ PORT Clkin2 = ps2_clk_rx_2
+ PORT Clkpd1 = ps2_clk_tx_1
+ PORT Clkpd2 = ps2_clk_tx_2
+ PORT Rx1 = ps2_d_rx_1
+ PORT Rx2 = ps2_d_rx_2
+ PORT Txpd1 = ps2_d_tx_1
+ PORT Txpd2 = ps2_d_tx_2
+ END
+
+ It would result in the following device tree nodes:
+
+ opb_ps2_dual_ref_0: opb-ps2-dual-ref@a9000000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "xlnx,compound";
+ ranges = <0 a9000000 2000>;
+ // If this device had extra parameters, then they would
+ // go here.
+ ps2@0 {
+ compatible = "xlnx,opb-ps2-dual-ref-1.00.a";
+ reg = <0 40>;
+ interrupt-parent = <&opb_intc_0>;
+ interrupts = <3 0>;
+ cell-index = <0>;
+ };
+ ps2@1000 {
+ compatible = "xlnx,opb-ps2-dual-ref-1.00.a";
+ reg = <1000 40>;
+ interrupt-parent = <&opb_intc_0>;
+ interrupts = <3 0>;
+ cell-index = <0>;
+ };
+ };
+
+ Also, the system.mhs file defines bus attachments from the processor
+ to the devices. The device tree structure should reflect the bus
+ attachments. Again an example; this system.mhs fragment:
+
+ BEGIN ppc405_virtex4
+ PARAMETER INSTANCE = ppc405_0
+ PARAMETER HW_VER = 1.01.a
+ BUS_INTERFACE DPLB = plb_v34_0
+ BUS_INTERFACE IPLB = plb_v34_0
+ END
+
+ BEGIN opb_intc
+ PARAMETER INSTANCE = opb_intc_0
+ PARAMETER HW_VER = 1.00.c
+ PARAMETER C_BASEADDR = 0xD1000FC0
+ PARAMETER C_HIGHADDR = 0xD1000FDF
+ BUS_INTERFACE SOPB = opb_v20_0
+ END
+
+ BEGIN opb_uart16550
+ PARAMETER INSTANCE = opb_uart16550_0
+ PARAMETER HW_VER = 1.00.d
+ PARAMETER C_BASEADDR = 0xa0000000
+ PARAMETER C_HIGHADDR = 0xa0001FFF
+ BUS_INTERFACE SOPB = opb_v20_0
+ END
+
+ BEGIN plb_v34
+ PARAMETER INSTANCE = plb_v34_0
+ PARAMETER HW_VER = 1.02.a
+ END
+
+ BEGIN plb_bram_if_cntlr
+ PARAMETER INSTANCE = plb_bram_if_cntlr_0
+ PARAMETER HW_VER = 1.00.b
+ PARAMETER C_BASEADDR = 0xFFFF0000
+ PARAMETER C_HIGHADDR = 0xFFFFFFFF
+ BUS_INTERFACE SPLB = plb_v34_0
+ END
+
+ BEGIN plb2opb_bridge
+ PARAMETER INSTANCE = plb2opb_bridge_0
+ PARAMETER HW_VER = 1.01.a
+ PARAMETER C_RNG0_BASEADDR = 0x20000000
+ PARAMETER C_RNG0_HIGHADDR = 0x3FFFFFFF
+ PARAMETER C_RNG1_BASEADDR = 0x60000000
+ PARAMETER C_RNG1_HIGHADDR = 0x7FFFFFFF
+ PARAMETER C_RNG2_BASEADDR = 0x80000000
+ PARAMETER C_RNG2_HIGHADDR = 0xBFFFFFFF
+ PARAMETER C_RNG3_BASEADDR = 0xC0000000
+ PARAMETER C_RNG3_HIGHADDR = 0xDFFFFFFF
+ BUS_INTERFACE SPLB = plb_v34_0
+ BUS_INTERFACE MOPB = opb_v20_0
+ END
+
+ Gives this device tree (some properties removed for clarity):
+
+ plb@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "xlnx,plb-v34-1.02.a";
+ device_type = "ibm,plb";
+ ranges; // 1:1 translation
+
+ plb_bram_if_cntrl_0: bram@ffff0000 {
+ reg = <ffff0000 10000>;
+ }
+
+ opb@20000000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <20000000 20000000 20000000
+ 60000000 60000000 20000000
+ 80000000 80000000 40000000
+ c0000000 c0000000 20000000>;
+
+ opb_uart16550_0: serial@a0000000 {
+ reg = <a00000000 2000>;
+ };
+
+ opb_intc_0: interrupt-controller@d1000fc0 {
+ reg = <d1000fc0 20>;
+ };
+ };
+ };
+
+ That covers the general approach to binding xilinx IP cores into the
+ device tree. The following are bindings for specific devices:
+
+ i) Xilinx ML300 Framebuffer
+
+ Simple framebuffer device from the ML300 reference design (also on the
+ ML403 reference design as well as others).
+
+ Optional properties:
+ - resolution = <xres yres> : pixel resolution of framebuffer. Some
+ implementations use a different resolution.
+ Default is <d#640 d#480>
+ - virt-resolution = <xvirt yvirt> : Size of framebuffer in memory.
+ Default is <d#1024 d#480>.
+ - rotate-display (empty) : rotate display 180 degrees.
+
+ ii) Xilinx SystemACE
+
+ The Xilinx SystemACE device is used to program FPGAs from an FPGA
+ bitstream stored on a CF card. It can also be used as a generic CF
+ interface device.
+
+ Optional properties:
+ - 8-bit (empty) : Set this property for SystemACE in 8 bit mode
+
+ iii) Xilinx EMAC and Xilinx TEMAC
+
+ Xilinx Ethernet devices. In addition to general xilinx properties
+ listed above, nodes for these devices should include a phy-handle
+ property, and may include other common network device properties
+ like local-mac-address.
+
+ iv) Xilinx Uartlite
+
+ Xilinx uartlite devices are simple fixed speed serial ports.
+
+ Required properties:
+ - current-speed : Baud rate of uartlite
+
+ v) Xilinx hwicap
+
+ Xilinx hwicap devices provide access to the configuration logic
+ of the FPGA through the Internal Configuration Access Port
+ (ICAP). The ICAP enables partial reconfiguration of the FPGA,
+ readback of the configuration information, and some control over
+ 'warm boots' of the FPGA fabric.
+
+ Required properties:
+ - xlnx,family : The family of the FPGA, necessary since the
+ capabilities of the underlying ICAP hardware
+ differ between different families. May be
+ 'virtex2p', 'virtex4', or 'virtex5'.
+
+ vi) Xilinx Uart 16550
+
+ Xilinx UART 16550 devices are very similar to the NS16550 but with
+ different register spacing and an offset from the base address.
+
+ Required properties:
+ - clock-frequency : Frequency of the clock input
+ - reg-offset : A value of 3 is required
+ - reg-shift : A value of 2 is required
+
+
diff --git a/Documentation/sound/alsa/HD-Audio-Models.txt b/Documentation/sound/alsa/HD-Audio-Models.txt
index 0d8d235..939a3dd 100644
--- a/Documentation/sound/alsa/HD-Audio-Models.txt
+++ b/Documentation/sound/alsa/HD-Audio-Models.txt
@@ -240,6 +240,7 @@
laptop-automute 2-channel with EAPD and HP-automute (Lenovo N100)
ultra 2-channel with EAPD (Samsung Ultra tablet PC)
samsung 2-channel with EAPD (Samsung R65)
+ samsung-p50 2-channel with HP-automute (Samsung P50)
AD1988/AD1988B/AD1989A/AD1989B
==============================
diff --git a/Documentation/spi/spidev_test.c b/Documentation/spi/spidev_test.c
index cf0e3ce0..c1a5aad 100644
--- a/Documentation/spi/spidev_test.c
+++ b/Documentation/spi/spidev_test.c
@@ -99,11 +99,13 @@
{ "lsb", 0, 0, 'L' },
{ "cs-high", 0, 0, 'C' },
{ "3wire", 0, 0, '3' },
+ { "no-cs", 0, 0, 'N' },
+ { "ready", 0, 0, 'R' },
{ NULL, 0, 0, 0 },
};
int c;
- c = getopt_long(argc, argv, "D:s:d:b:lHOLC3", lopts, NULL);
+ c = getopt_long(argc, argv, "D:s:d:b:lHOLC3NR", lopts, NULL);
if (c == -1)
break;
@@ -139,6 +141,12 @@
case '3':
mode |= SPI_3WIRE;
break;
+ case 'N':
+ mode |= SPI_NO_CS;
+ break;
+ case 'R':
+ mode |= SPI_READY;
+ break;
default:
print_usage(argv[0]);
break;
diff --git a/Documentation/video4linux/CARDLIST.em28xx b/Documentation/video4linux/CARDLIST.em28xx
index 873630e..014d255 100644
--- a/Documentation/video4linux/CARDLIST.em28xx
+++ b/Documentation/video4linux/CARDLIST.em28xx
@@ -66,3 +66,4 @@
68 -> Terratec AV350 (em2860) [0ccd:0084]
69 -> KWorld ATSC 315U HDTV TV Box (em2882) [eb1a:a313]
70 -> Evga inDtube (em2882)
+ 71 -> Silvercrest Webcam 1.3mpix (em2820/em2840)
diff --git a/Documentation/x86/00-INDEX b/Documentation/x86/00-INDEX
index dbe3377..f37b46d 100644
--- a/Documentation/x86/00-INDEX
+++ b/Documentation/x86/00-INDEX
@@ -2,3 +2,5 @@
- this file
mtrr.txt
- how to use x86 Memory Type Range Registers to increase performance
+exception-tables.txt
+ - why and how Linux kernel uses exception tables on x86
diff --git a/Documentation/exception.txt b/Documentation/x86/exception-tables.txt
similarity index 74%
rename from Documentation/exception.txt
rename to Documentation/x86/exception-tables.txt
index 2d5aded..32901aa 100644
--- a/Documentation/exception.txt
+++ b/Documentation/x86/exception-tables.txt
@@ -1,123 +1,123 @@
- Kernel level exception handling in Linux 2.1.8
+ Kernel level exception handling in Linux
Commentary by Joerg Pommnitz <joerg@raleigh.ibm.com>
-When a process runs in kernel mode, it often has to access user
-mode memory whose address has been passed by an untrusted program.
+When a process runs in kernel mode, it often has to access user
+mode memory whose address has been passed by an untrusted program.
To protect itself the kernel has to verify this address.
-In older versions of Linux this was done with the
-int verify_area(int type, const void * addr, unsigned long size)
+In older versions of Linux this was done with the
+int verify_area(int type, const void * addr, unsigned long size)
function (which has since been replaced by access_ok()).
-This function verified that the memory area starting at address
+This function verified that the memory area starting at address
'addr' and of size 'size' was accessible for the operation specified
-in type (read or write). To do this, verify_read had to look up the
-virtual memory area (vma) that contained the address addr. In the
-normal case (correctly working program), this test was successful.
+in type (read or write). To do this, verify_read had to look up the
+virtual memory area (vma) that contained the address addr. In the
+normal case (correctly working program), this test was successful.
It only failed for a few buggy programs. In some kernel profiling
tests, this normally unneeded verification used up a considerable
amount of time.
-To overcome this situation, Linus decided to let the virtual memory
+To overcome this situation, Linus decided to let the virtual memory
hardware present in every Linux-capable CPU handle this test.
How does this work?
-Whenever the kernel tries to access an address that is currently not
-accessible, the CPU generates a page fault exception and calls the
-page fault handler
+Whenever the kernel tries to access an address that is currently not
+accessible, the CPU generates a page fault exception and calls the
+page fault handler
void do_page_fault(struct pt_regs *regs, unsigned long error_code)
-in arch/i386/mm/fault.c. The parameters on the stack are set up by
-the low level assembly glue in arch/i386/kernel/entry.S. The parameter
-regs is a pointer to the saved registers on the stack, error_code
+in arch/x86/mm/fault.c. The parameters on the stack are set up by
+the low level assembly glue in arch/x86/kernel/entry_32.S. The parameter
+regs is a pointer to the saved registers on the stack, error_code
contains a reason code for the exception.
-do_page_fault first obtains the unaccessible address from the CPU
-control register CR2. If the address is within the virtual address
-space of the process, the fault probably occurred, because the page
-was not swapped in, write protected or something similar. However,
-we are interested in the other case: the address is not valid, there
-is no vma that contains this address. In this case, the kernel jumps
-to the bad_area label.
+do_page_fault first obtains the unaccessible address from the CPU
+control register CR2. If the address is within the virtual address
+space of the process, the fault probably occurred, because the page
+was not swapped in, write protected or something similar. However,
+we are interested in the other case: the address is not valid, there
+is no vma that contains this address. In this case, the kernel jumps
+to the bad_area label.
-There it uses the address of the instruction that caused the exception
-(i.e. regs->eip) to find an address where the execution can continue
-(fixup). If this search is successful, the fault handler modifies the
-return address (again regs->eip) and returns. The execution will
+There it uses the address of the instruction that caused the exception
+(i.e. regs->eip) to find an address where the execution can continue
+(fixup). If this search is successful, the fault handler modifies the
+return address (again regs->eip) and returns. The execution will
continue at the address in fixup.
Where does fixup point to?
-Since we jump to the contents of fixup, fixup obviously points
-to executable code. This code is hidden inside the user access macros.
-I have picked the get_user macro defined in include/asm/uaccess.h as an
-example. The definition is somewhat hard to follow, so let's peek at
+Since we jump to the contents of fixup, fixup obviously points
+to executable code. This code is hidden inside the user access macros.
+I have picked the get_user macro defined in arch/x86/include/asm/uaccess.h
+as an example. The definition is somewhat hard to follow, so let's peek at
the code generated by the preprocessor and the compiler. I selected
-the get_user call in drivers/char/console.c for a detailed examination.
+the get_user call in drivers/char/sysrq.c for a detailed examination.
-The original code in console.c line 1405:
+The original code in sysrq.c line 587:
get_user(c, buf);
The preprocessor output (edited to become somewhat readable):
(
- {
- long __gu_err = - 14 , __gu_val = 0;
- const __typeof__(*( ( buf ) )) *__gu_addr = ((buf));
- if (((((0 + current_set[0])->tss.segment) == 0x18 ) ||
- (((sizeof(*(buf))) <= 0xC0000000UL) &&
- ((unsigned long)(__gu_addr ) <= 0xC0000000UL - (sizeof(*(buf)))))))
+ {
+ long __gu_err = - 14 , __gu_val = 0;
+ const __typeof__(*( ( buf ) )) *__gu_addr = ((buf));
+ if (((((0 + current_set[0])->tss.segment) == 0x18 ) ||
+ (((sizeof(*(buf))) <= 0xC0000000UL) &&
+ ((unsigned long)(__gu_addr ) <= 0xC0000000UL - (sizeof(*(buf)))))))
do {
- __gu_err = 0;
- switch ((sizeof(*(buf)))) {
- case 1:
- __asm__ __volatile__(
- "1: mov" "b" " %2,%" "b" "1\n"
- "2:\n"
- ".section .fixup,\"ax\"\n"
- "3: movl %3,%0\n"
- " xor" "b" " %" "b" "1,%" "b" "1\n"
- " jmp 2b\n"
- ".section __ex_table,\"a\"\n"
- " .align 4\n"
- " .long 1b,3b\n"
- ".text" : "=r"(__gu_err), "=q" (__gu_val): "m"((*(struct __large_struct *)
- ( __gu_addr )) ), "i"(- 14 ), "0"( __gu_err )) ;
- break;
- case 2:
+ __gu_err = 0;
+ switch ((sizeof(*(buf)))) {
+ case 1:
__asm__ __volatile__(
- "1: mov" "w" " %2,%" "w" "1\n"
- "2:\n"
- ".section .fixup,\"ax\"\n"
- "3: movl %3,%0\n"
- " xor" "w" " %" "w" "1,%" "w" "1\n"
- " jmp 2b\n"
- ".section __ex_table,\"a\"\n"
- " .align 4\n"
- " .long 1b,3b\n"
+ "1: mov" "b" " %2,%" "b" "1\n"
+ "2:\n"
+ ".section .fixup,\"ax\"\n"
+ "3: movl %3,%0\n"
+ " xor" "b" " %" "b" "1,%" "b" "1\n"
+ " jmp 2b\n"
+ ".section __ex_table,\"a\"\n"
+ " .align 4\n"
+ " .long 1b,3b\n"
+ ".text" : "=r"(__gu_err), "=q" (__gu_val): "m"((*(struct __large_struct *)
+ ( __gu_addr )) ), "i"(- 14 ), "0"( __gu_err )) ;
+ break;
+ case 2:
+ __asm__ __volatile__(
+ "1: mov" "w" " %2,%" "w" "1\n"
+ "2:\n"
+ ".section .fixup,\"ax\"\n"
+ "3: movl %3,%0\n"
+ " xor" "w" " %" "w" "1,%" "w" "1\n"
+ " jmp 2b\n"
+ ".section __ex_table,\"a\"\n"
+ " .align 4\n"
+ " .long 1b,3b\n"
".text" : "=r"(__gu_err), "=r" (__gu_val) : "m"((*(struct __large_struct *)
- ( __gu_addr )) ), "i"(- 14 ), "0"( __gu_err ));
- break;
- case 4:
- __asm__ __volatile__(
- "1: mov" "l" " %2,%" "" "1\n"
- "2:\n"
- ".section .fixup,\"ax\"\n"
- "3: movl %3,%0\n"
- " xor" "l" " %" "" "1,%" "" "1\n"
- " jmp 2b\n"
- ".section __ex_table,\"a\"\n"
- " .align 4\n" " .long 1b,3b\n"
+ ( __gu_addr )) ), "i"(- 14 ), "0"( __gu_err ));
+ break;
+ case 4:
+ __asm__ __volatile__(
+ "1: mov" "l" " %2,%" "" "1\n"
+ "2:\n"
+ ".section .fixup,\"ax\"\n"
+ "3: movl %3,%0\n"
+ " xor" "l" " %" "" "1,%" "" "1\n"
+ " jmp 2b\n"
+ ".section __ex_table,\"a\"\n"
+ " .align 4\n" " .long 1b,3b\n"
".text" : "=r"(__gu_err), "=r" (__gu_val) : "m"((*(struct __large_struct *)
- ( __gu_addr )) ), "i"(- 14 ), "0"(__gu_err));
- break;
- default:
- (__gu_val) = __get_user_bad();
- }
- } while (0) ;
- ((c)) = (__typeof__(*((buf))))__gu_val;
+ ( __gu_addr )) ), "i"(- 14 ), "0"(__gu_err));
+ break;
+ default:
+ (__gu_val) = __get_user_bad();
+ }
+ } while (0) ;
+ ((c)) = (__typeof__(*((buf))))__gu_val;
__gu_err;
}
);
@@ -127,12 +127,12 @@
> xorl %edx,%edx
> movl current_set,%eax
- > cmpl $24,788(%eax)
- > je .L1424
+ > cmpl $24,788(%eax)
+ > je .L1424
> cmpl $-1073741825,64(%esp)
- > ja .L1423
+ > ja .L1423
> .L1424:
- > movl %edx,%eax
+ > movl %edx,%eax
> movl 64(%esp),%ebx
> #APP
> 1: movb (%ebx),%dl /* this is the actual user access */
@@ -149,17 +149,17 @@
> .L1423:
> movzbl %dl,%esi
-The optimizer does a good job and gives us something we can actually
-understand. Can we? The actual user access is quite obvious. Thanks
-to the unified address space we can just access the address in user
+The optimizer does a good job and gives us something we can actually
+understand. Can we? The actual user access is quite obvious. Thanks
+to the unified address space we can just access the address in user
memory. But what does the .section stuff do?????
To understand this we have to look at the final kernel:
> objdump --section-headers vmlinux
- >
+ >
> vmlinux: file format elf32-i386
- >
+ >
> Sections:
> Idx Name Size VMA LMA File off Algn
> 0 .text 00098f40 c0100000 c0100000 00001000 2**4
@@ -198,18 +198,18 @@
The whole user memory access is reduced to 10 x86 machine instructions.
The instructions bracketed in the .section directives are no longer
-in the normal execution path. They are located in a different section
+in the normal execution path. They are located in a different section
of the executable file:
> objdump --disassemble --section=.fixup vmlinux
- >
+ >
> c0199ff5 <.fixup+10b5> movl $0xfffffff2,%eax
> c0199ffa <.fixup+10ba> xorb %dl,%dl
> c0199ffc <.fixup+10bc> jmp c017e7a7 <do_con_write+e3>
And finally:
> objdump --full-contents --section=__ex_table vmlinux
- >
+ >
> c01aa7c4 93c017c0 e09f19c0 97c017c0 99c017c0 ................
> c01aa7d4 f6c217c0 e99f19c0 a5e717c0 f59f19c0 ................
> c01aa7e4 080a18c0 01a019c0 0a0a18c0 04a019c0 ................
@@ -235,8 +235,8 @@
ended up in the .fixup section of the object file and the addresses
.long 1b,3b
ended up in the __ex_table section of the object file. 1b and 3b
-are local labels. The local label 1b (1b stands for next label 1
-backward) is the address of the instruction that might fault, i.e.
+are local labels. The local label 1b (1b stands for next label 1
+backward) is the address of the instruction that might fault, i.e.
in our case the address of the label 1 is c017e7a5:
the original assembly code: > 1: movb (%ebx),%dl
and linked in vmlinux : > c017e7a5 <do_con_write+e1> movb (%ebx),%dl
@@ -254,7 +254,7 @@
becomes the value pair
> c01aa7d4 c017c2f6 c0199fe9 c017e7a5 c0199ff5 ................
^this is ^this is
- 1b 3b
+ 1b 3b
c017e7a5,c0199ff5 in the exception table of the kernel.
So, what actually happens if a fault from kernel mode with no suitable
@@ -266,9 +266,9 @@
3.) CPU calls do_page_fault
4.) do page fault calls search_exception_table (regs->eip == c017e7a5);
5.) search_exception_table looks up the address c017e7a5 in the
- exception table (i.e. the contents of the ELF section __ex_table)
+ exception table (i.e. the contents of the ELF section __ex_table)
and returns the address of the associated fault handle code c0199ff5.
-6.) do_page_fault modifies its own return address to point to the fault
+6.) do_page_fault modifies its own return address to point to the fault
handle code and returns.
7.) execution continues in the fault handling code.
8.) 8a) EAX becomes -EFAULT (== -14)
diff --git a/MAINTAINERS b/MAINTAINERS
index fa2a16d..18c3f0c 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -867,12 +867,22 @@
W: http://www.shark-linux.de/shark.html
S: Maintained
+ARM/SAMSUNG ARM ARCHITECTURES
+P: Ben Dooks
+M: ben-linux@fluff.org
+L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
+W: http://www.fluff.org/ben/linux/
+S: Maintained
+F: arch/arm/plat-s3c/
+F: arch/arm/plat-s3c24xx/
+
ARM/S3C2410 ARM ARCHITECTURE
P: Ben Dooks
M: ben-linux@fluff.org
L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
W: http://www.fluff.org/ben/linux/
S: Maintained
+F: arch/arm/mach-s3c2410/
ARM/S3C2440 ARM ARCHITECTURE
P: Ben Dooks
@@ -880,6 +890,39 @@
L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
W: http://www.fluff.org/ben/linux/
S: Maintained
+F: arch/arm/mach-s3c2440/
+
+ARM/S3C2442 ARM ARCHITECTURE
+P: Ben Dooks
+M: ben-linux@fluff.org
+L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
+W: http://www.fluff.org/ben/linux/
+S: Maintained
+F: arch/arm/mach-s3c2442/
+
+ARM/S3C2443 ARM ARCHITECTURE
+P: Ben Dooks
+M: ben-linux@fluff.org
+L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
+W: http://www.fluff.org/ben/linux/
+S: Maintained
+F: arch/arm/mach-s3c2443/
+
+ARM/S3C6400 ARM ARCHITECTURE
+P: Ben Dooks
+M: ben-linux@fluff.org
+L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
+W: http://www.fluff.org/ben/linux/
+S: Maintained
+F: arch/arm/mach-s3c6400/
+
+ARM/S3C6410 ARM ARCHITECTURE
+P: Ben Dooks
+M: ben-linux@fluff.org
+L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
+W: http://www.fluff.org/ben/linux/
+S: Maintained
+F: arch/arm/mach-s3c6410/
ARM/TECHNOLOGIC SYSTEMS TS7250 MACHINE SUPPORT
P: Lennert Buytenhek
@@ -2087,9 +2130,9 @@
EDAC-I82975X
P: Ranganathan Desikan
-M: rdesikan@jetzbroadband.com
+M: ravi@jetztechnologies.com
P: Arvind R.
-M: arvind@acarlab.com
+M: arvind@jetztechnologies.com
L: bluesmoke-devel@lists.sourceforge.net (moderated for non-subscribers)
W: bluesmoke.sourceforge.net
S: Maintained
@@ -2808,7 +2851,9 @@
IA64 (Itanium) PLATFORM
P: Tony Luck
+P: Fenghua Yu
M: tony.luck@intel.com
+M: fenghua.yu@intel.com
L: linux-ia64@vger.kernel.org
W: http://www.ia64-linux.org/
T: git git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6.git
@@ -2886,7 +2931,7 @@
M: dbaryshkov@gmail.com
P: Sergey Lapin
M: slapin@ossfans.org
-L: linux-zigbee-devel@lists.sourceforge.net
+L: linux-zigbee-devel@lists.sourceforge.net (moderated for non-subscribers)
W: http://apps.sourceforge.net/trac/linux-zigbee
T: git git://git.kernel.org/pub/scm/linux/kernel/git/lowpan/lowpan.git
S: Maintained
@@ -3242,11 +3287,11 @@
JFS FILESYSTEM
P: Dave Kleikamp
-M: shaggy@austin.ibm.com
+M: shaggy@linux.vnet.ibm.com
L: jfs-discussion@lists.sourceforge.net
W: http://jfs.sourceforge.net/
T: git git://git.kernel.org/pub/scm/linux/kernel/git/shaggy/jfs-2.6.git
-S: Supported
+S: Maintained
F: Documentation/filesystems/jfs.txt
F: fs/jfs/
@@ -4362,7 +4407,7 @@
S: Maintained
F: drivers/net/wireless/orinoco/
-OSD LIBRARY
+OSD LIBRARY and FILESYSTEM
P: Boaz Harrosh
M: bharrosh@panasas.com
P: Benny Halevy
@@ -4371,6 +4416,9 @@
W: http://open-osd.org
T: git git://git.open-osd.org/open-osd.git
S: Maintained
+F: drivers/scsi/osd/
+F: drivers/include/scsi/osd_*
+F: fs/exofs/
P54 WIRELESS DRIVER
P: Michael Wu
@@ -5533,8 +5581,8 @@
STARFIRE/DURALAN NETWORK DRIVER
P: Ion Badulescu
-M: ionut@cs.columbia.edu
-S: Maintained
+M: ionut@badula.org
+S: Odd Fixes
F: drivers/net/starfire*
STARMODE RADIO IP (STRIP) PROTOCOL DRIVER
@@ -5668,6 +5716,13 @@
F: drivers/mmc/host/tifm_sd.c
F: include/linux/tifm.h
+TI TWL4030 SERIES SOC CODEC DRIVER
+P: Peter Ujfalusi
+M: peter.ujfalusi@nokia.com
+L: alsa-devel@alsa-project.org (moderated for non-subscribers)
+S: Maintained
+F: sound/soc/codecs/twl4030*
+
TIPC NETWORK LAYER
P: Per Liden
M: per.liden@ericsson.com
@@ -5751,17 +5806,17 @@
M: trivial@kernel.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial.git
S: Maintained
-F: drivers/char/tty_*
-F: drivers/serial/serial_core.c
-F: include/linux/serial_core.h
-F: include/linux/serial.h
-F: include/linux/tty.h
TTY LAYER
P: Alan Cox
M: alan@lxorguk.ukuu.org.uk
S: Maintained
T: stgit http://zeniv.linux.org.uk/~alan/ttydev/
+F: drivers/char/tty_*
+F: drivers/serial/serial_core.c
+F: include/linux/serial_core.h
+F: include/linux/serial.h
+F: include/linux/tty.h
TULIP NETWORK DRIVERS
P: Grant Grundler
@@ -5799,7 +5854,7 @@
P: Artem Bityutskiy
M: dedekind@infradead.org
P: Adrian Hunter
-M: ext-adrian.hunter@nokia.com
+M: adrian.hunter@nokia.com
L: linux-mtd@lists.infradead.org
T: git git://git.infradead.org/ubifs-2.6.git
W: http://www.linux-mtd.infradead.org/doc/ubifs.html
diff --git a/Makefile b/Makefile
index d1216fe..be0abac 100644
--- a/Makefile
+++ b/Makefile
@@ -1,7 +1,7 @@
VERSION = 2
PATCHLEVEL = 6
SUBLEVEL = 31
-EXTRAVERSION = -rc1
+EXTRAVERSION = -rc3
NAME = Man-Eating Seals of Antiquity
# *DOCUMENTATION*
@@ -140,15 +140,13 @@
endif
srctree := $(if $(KBUILD_SRC),$(KBUILD_SRC),$(CURDIR))
-TOPDIR := $(srctree)
-# FIXME - TOPDIR is obsolete, use srctree/objtree
objtree := $(CURDIR)
src := $(srctree)
obj := $(objtree)
VPATH := $(srctree)$(if $(KBUILD_EXTMOD),:$(KBUILD_EXTMOD))
-export srctree objtree VPATH TOPDIR
+export srctree objtree VPATH
# SUBARCH tells the usermode build what the underlying arch is. That is set
@@ -344,7 +342,8 @@
KBUILD_CFLAGS := -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs \
-fno-strict-aliasing -fno-common \
- -Werror-implicit-function-declaration
+ -Werror-implicit-function-declaration \
+ -Wno-format-security
KBUILD_AFLAGS := -D__ASSEMBLY__
# Read KERNELRELEASE from include/config/kernel.release (if it exists)
@@ -566,7 +565,7 @@
KBUILD_CFLAGS += $(call cc-option,-Wno-pointer-sign,)
# disable invalid "can't wrap" optimizations for signed / pointers
-KBUILD_CFLAGS += $(call cc-option,-fwrapv)
+KBUILD_CFLAGS += $(call cc-option,-fno-strict-overflow)
# revert to pre-gcc-4.4 behaviour of .eh_frame
KBUILD_CFLAGS += $(call cc-option,-fno-dwarf2-cfi-asm)
diff --git a/arch/alpha/include/asm/percpu.h b/arch/alpha/include/asm/percpu.h
index 06c5c7a..b663f1f 100644
--- a/arch/alpha/include/asm/percpu.h
+++ b/arch/alpha/include/asm/percpu.h
@@ -30,7 +30,7 @@
#ifndef MODULE
#define SHIFT_PERCPU_PTR(var, offset) RELOC_HIDE(&per_cpu_var(var), (offset))
-#define PER_CPU_ATTRIBUTES
+#define PER_CPU_DEF_ATTRIBUTES
#else
/*
* To calculate addresses of locally defined variables, GCC uses 32-bit
@@ -49,7 +49,7 @@
: "=&r"(__ptr), "=&r"(tmp_gp)); \
(typeof(&per_cpu_var(var)))(__ptr + (offset)); })
-#define PER_CPU_ATTRIBUTES __used
+#define PER_CPU_DEF_ATTRIBUTES __used
#endif /* MODULE */
@@ -71,7 +71,7 @@
#define __get_cpu_var(var) per_cpu_var(var)
#define __raw_get_cpu_var(var) per_cpu_var(var)
-#define PER_CPU_ATTRIBUTES
+#define PER_CPU_DEF_ATTRIBUTES
#endif /* SMP */
diff --git a/arch/alpha/include/asm/thread_info.h b/arch/alpha/include/asm/thread_info.h
index d069526..60c83ab 100644
--- a/arch/alpha/include/asm/thread_info.h
+++ b/arch/alpha/include/asm/thread_info.h
@@ -37,6 +37,7 @@
.task = &tsk, \
.exec_domain = &default_exec_domain, \
.addr_limit = KERNEL_DS, \
+ .preempt_count = INIT_PREEMPT_COUNT, \
.restart_block = { \
.fn = do_no_restart_syscall, \
}, \
diff --git a/arch/alpha/kernel/ptrace.c b/arch/alpha/kernel/ptrace.c
index 1e9ad52..e072041d 100644
--- a/arch/alpha/kernel/ptrace.c
+++ b/arch/alpha/kernel/ptrace.c
@@ -8,7 +8,6 @@
#include <linux/sched.h>
#include <linux/mm.h>
#include <linux/smp.h>
-#include <linux/smp_lock.h>
#include <linux/errno.h>
#include <linux/ptrace.h>
#include <linux/user.h>
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index a71fd94..a89e473 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -99,14 +99,6 @@
output to the second serial port on these devices. Saying N will
cause the debug messages to appear on the first serial port.
-config DEBUG_S3C_PORT
- depends on DEBUG_LL && PLAT_S3C
- bool "Kernel low-level debugging messages via S3C UART"
- help
- Say Y here if you want debug print routines to go to one of the
- S3C internal UARTs. The chosen UART must have been configured
- before it is used.
-
config DEBUG_S3C_UART
depends on PLAT_S3C
int "S3C UART to use for low-level debug"
diff --git a/arch/arm/configs/kb9202_defconfig b/arch/arm/configs/kb9202_defconfig
index 8e74c66..605a846 100644
--- a/arch/arm/configs/kb9202_defconfig
+++ b/arch/arm/configs/kb9202_defconfig
@@ -1,109 +1,246 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.13-rc2
-# Sun Aug 14 19:26:59 2005
+# Linux kernel version: 2.6.30-rc8
+# Wed Jun 3 13:52:33 2009
#
CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_MMU=y
-CONFIG_UID16=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
-
-#
-# Code maturity level options
-#
-# CONFIG_EXPERIMENTAL is not set
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# General setup
#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
# CONFIG_SWAP is not set
-# CONFIG_SYSVIPC is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+# CONFIG_TASKSTATS is not set
+CONFIG_AUDIT=y
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=17
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+# CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-# CONFIG_KOBJECT_UEVENT is not set
-# CONFIG_IKCONFIG is not set
+CONFIG_ANON_INODES=y
# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_KALLSYMS_EXTRA_PASS=y
+# CONFIG_STRIP_ASM_SYMS is not set
+CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
+CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
+CONFIG_AIO=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+CONFIG_TRACEPOINTS=y
+CONFIG_MARKERS=y
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
#
-# Loadable module support
+# IO Schedulers
#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_FREEZER is not set
#
# System Type
#
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_AAEC2000 is not set
# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_IOP3XX is not set
-# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+CONFIG_ARCH_AT91=y
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_PNX4008 is not set
# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MMP is not set
# CONFIG_ARCH_RPC is not set
# CONFIG_ARCH_SA1100 is not set
# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
# CONFIG_ARCH_SHARK is not set
# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_AAEC2000 is not set
-CONFIG_ARCH_AT91=y
-CONFIG_ARCH_AT91RM9200=y
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_W90X900 is not set
#
-# AT91RM9200 Implementations
+# Atmel AT91 System-on-Chip
#
+CONFIG_ARCH_AT91RM9200=y
+# CONFIG_ARCH_AT91SAM9260 is not set
+# CONFIG_ARCH_AT91SAM9261 is not set
+# CONFIG_ARCH_AT91SAM9263 is not set
+# CONFIG_ARCH_AT91SAM9RL is not set
+# CONFIG_ARCH_AT91SAM9G20 is not set
+# CONFIG_ARCH_AT91CAP9 is not set
+# CONFIG_ARCH_AT91X40 is not set
+CONFIG_AT91_PMC_UNIT=y
+
+#
+# AT91RM9200 Board Type
+#
+# CONFIG_MACH_ONEARM is not set
# CONFIG_ARCH_AT91RM9200DK is not set
# CONFIG_MACH_AT91RM9200EK is not set
# CONFIG_MACH_CSB337 is not set
# CONFIG_MACH_CSB637 is not set
# CONFIG_MACH_CARMEVA is not set
+# CONFIG_MACH_ATEB9200 is not set
CONFIG_MACH_KB9200=y
+# CONFIG_MACH_PICOTUX2XX is not set
+# CONFIG_MACH_KAFA is not set
+# CONFIG_MACH_ECBAT91 is not set
+# CONFIG_MACH_YL9200 is not set
+
+#
+# AT91 Board Options
+#
+
+#
+# AT91 Feature Selections
+#
+CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
+CONFIG_AT91_TIMER_HZ=128
+CONFIG_AT91_EARLY_DBGU=y
+# CONFIG_AT91_EARLY_USART0 is not set
+# CONFIG_AT91_EARLY_USART1 is not set
+# CONFIG_AT91_EARLY_USART2 is not set
+# CONFIG_AT91_EARLY_USART3 is not set
+# CONFIG_AT91_EARLY_USART4 is not set
+# CONFIG_AT91_EARLY_USART5 is not set
#
# Processor Type
#
CONFIG_CPU_32=y
CONFIG_CPU_ARM920T=y
-CONFIG_CPU_32v4=y
+CONFIG_CPU_32v4T=y
CONFIG_CPU_ABRT_EV4T=y
+CONFIG_CPU_PABRT_NOIFAR=y
CONFIG_CPU_CACHE_V4WT=y
CONFIG_CPU_CACHE_VIVT=y
CONFIG_CPU_COPY_V4WB=y
CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
#
# Processor Features
@@ -112,23 +249,48 @@
# CONFIG_CPU_ICACHE_DISABLE is not set
# CONFIG_CPU_DCACHE_DISABLE is not set
# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+# CONFIG_OUTER_CACHE is not set
#
# Bus support
#
-CONFIG_ISA_DMA_API=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
# CONFIG_PCCARD is not set
#
# Kernel Features
#
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PREEMPT=y
+CONFIG_HZ=128
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+# CONFIG_ARCH_HAS_HOLES_MEMORYMODEL is not set
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
# CONFIG_LEDS is not set
CONFIG_ALIGNMENT_TRAP=y
@@ -137,8 +299,16 @@
#
CONFIG_ZBOOT_ROM_TEXT=0x10000000
CONFIG_ZBOOT_ROM_BSS=0x20040000
-CONFIG_ZBOOT_ROM=y
-CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/ram rw initrd=0x20210000,654933"
+# CONFIG_ZBOOT_ROM is not set
+CONFIG_CMDLINE="noinitrd root=/dev/mtdblock0 rootfstype=jffs2 mem=64M"
+# CONFIG_XIP_KERNEL is not set
+CONFIG_KEXEC=y
+CONFIG_ATAGS_PROC=y
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
#
# Floating point emulation
@@ -149,19 +319,93 @@
#
CONFIG_FPE_NWFPE=y
# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
#
# Userspace binary formats
#
CONFIG_BINFMT_ELF=y
-CONFIG_BINFMT_AOUT=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
CONFIG_BINFMT_MISC=y
-# CONFIG_ARTHUR is not set
#
# Power management options
#
# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_NET_DROP_MONITOR is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
#
# Device Drivers
@@ -170,53 +414,156 @@
#
# Generic Driver Options
#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-CONFIG_DEBUG_DRIVER=y
+CONFIG_FW_LOADER=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
#
-# Memory Technology Devices (MTD)
+# User Modules And Translation Layers
#
-# CONFIG_MTD is not set
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
#
-# Parallel port support
+# RAM/ROM/Flash chip drivers
#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+CONFIG_MTD_CFI_INTELEXT=y
+# CONFIG_MTD_CFI_AMDSTD is not set
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+CONFIG_MTD_COMPLEX_MAPPINGS=y
+CONFIG_MTD_PHYSMAP=y
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+# CONFIG_MTD_NAND_GPIO is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+CONFIG_MTD_NAND_ATMEL=y
+# CONFIG_MTD_NAND_ATMEL_ECC_HW is not set
+CONFIG_MTD_NAND_ATMEL_ECC_SOFT=y
+# CONFIG_MTD_NAND_ATMEL_ECC_NONE is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ALAUDA is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+CONFIG_MTD_UBI=y
+CONFIG_MTD_UBI_WL_THRESHOLD=4096
+CONFIG_MTD_UBI_BEB_RESERVE=1
+CONFIG_MTD_UBI_GLUEBI=y
+
+#
+# UBI debugging options
+#
+# CONFIG_MTD_UBI_DEBUG is not set
# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
+CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-CONFIG_BLK_DEV_NBD=y
+# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
+CONFIG_BLK_DEV_RAM_SIZE=16384
+# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+CONFIG_MISC_DEVICES=y
+CONFIG_ATMEL_TCLIB=y
+CONFIG_ATMEL_TCB_CLKSRC=y
+CONFIG_ATMEL_TCB_CLKSRC_BLOCK=0
+CONFIG_ATMEL_SSC=y
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_C2PORT is not set
#
-# IO Schedulers
+# EEPROM support
#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_EEPROM_93CX6 is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
#
# SCSI device support
#
+# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
CONFIG_SCSI_PROC_FS=y
#
@@ -232,145 +579,87 @@
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
+CONFIG_SCSI_MULTI_LUN=y
+CONFIG_SCSI_CONSTANTS=y
+CONFIG_SCSI_LOGGING=y
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
#
-# SCSI Transport Attributes
+# SCSI Transports
#
-# CONFIG_SCSI_SPI_ATTRS is not set
+CONFIG_SCSI_SPI_ATTRS=m
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_DEBUG is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+# CONFIG_SCSI_LOWLEVEL is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+# CONFIG_ATA is not set
# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-# CONFIG_IP_TCPDIAG is not set
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
+# CONFIG_VETH is not set
+# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
CONFIG_ARM_AT91_ETHER=y
+# CONFIG_AX88796 is not set
# CONFIG_SMC91X is not set
# CONFIG_DM9000 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
#
-# Ethernet (1000 Mbit)
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
#
#
-# Ethernet (10000 Mbit)
+# USB Network Adapters
#
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
# CONFIG_WAN is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
-
-#
-# ISDN subsystem
-#
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
# CONFIG_ISDN is not set
#
# Input device support
#
CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
#
# Userland interfaces
@@ -380,7 +669,6 @@
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
@@ -390,23 +678,25 @@
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
#
# Hardware I/O ports
#
-CONFIG_SERIO=y
-# CONFIG_SERIO_SERPORT is not set
-# CONFIG_SERIO_RAW is not set
+# CONFIG_SERIO is not set
# CONFIG_GAMEPORT is not set
#
# Character devices
#
CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
@@ -419,159 +709,232 @@
#
CONFIG_SERIAL_ATMEL=y
CONFIG_SERIAL_ATMEL_CONSOLE=y
+CONFIG_SERIAL_ATMEL_PDC=y
+# CONFIG_SERIAL_ATMEL_TTYAT is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-# CONFIG_RTC is not set
-# CONFIG_AT91RM9200_RTC is not set
-# CONFIG_DTLK is not set
+# CONFIG_HW_RANDOM is not set
# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_AT91_SPI is not set
-
-#
-# I2C support
-#
+# CONFIG_TCG_TPM is not set
# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+# CONFIG_GPIO_SYSFS is not set
#
-# Misc devices
+# Memory mapped GPIO expanders:
#
#
+# I2C GPIO expanders:
+#
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_AT91RM9200_WATCHDOG=y
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+
+#
# Multimedia devices
#
-# CONFIG_VIDEO_DEV is not set
#
-# Digital Video Broadcasting Devices
+# Multimedia core support
#
-# CONFIG_DVB is not set
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+# CONFIG_DAB is not set
#
# Graphics support
#
-# CONFIG_FB is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+# CONFIG_FB_CFB_FILLRECT is not set
+# CONFIG_FB_CFB_COPYAREA is not set
+# CONFIG_FB_CFB_IMAGEBLIT is not set
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+CONFIG_FB_MODE_HELPERS=y
+CONFIG_FB_TILEBLITTING=y
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+# CONFIG_LCD_CLASS_DEVICE is not set
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+# CONFIG_BACKLIGHT_GENERIC is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
#
# Console display driver support
#
# CONFIG_VGA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+CONFIG_FONTS=y
+# CONFIG_FONT_8x8 is not set
+# CONFIG_FONT_8x16 is not set
+# CONFIG_FONT_6x11 is not set
+# CONFIG_FONT_7x14 is not set
+# CONFIG_FONT_PEARL_8x8 is not set
+# CONFIG_FONT_ACORN_8x8 is not set
+CONFIG_FONT_MINI_4x6=y
+# CONFIG_FONT_SUN8x16 is not set
+# CONFIG_FONT_SUN12x22 is not set
+# CONFIG_FONT_10x18 is not set
+# CONFIG_LOGO is not set
# CONFIG_SOUND is not set
-
-#
-# USB support
-#
+# CONFIG_HID_SUPPORT is not set
+CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
CONFIG_USB=y
-CONFIG_USB_DEBUG=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+# CONFIG_USB_MON is not set
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
#
# USB Host Controller Drivers
#
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+# CONFIG_USB_MUSB_HDRC is not set
#
# USB Device Class drivers
#
-# CONFIG_USB_BLUETOOTH_TTY is not set
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+
+#
+# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=y
-CONFIG_USB_STORAGE_DEBUG=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-
-#
-# USB Input Devices
-#
-# CONFIG_USB_HID is not set
-
-#
-# USB HID Boot Protocol drivers
-#
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_MOUSE is not set
-# CONFIG_USB_AIPTEK is not set
-# CONFIG_USB_WACOM is not set
-# CONFIG_USB_ACECAD is not set
-# CONFIG_USB_KBTAB is not set
-# CONFIG_USB_POWERMATE is not set
-# CONFIG_USB_MTOUCH is not set
-# CONFIG_USB_ITMTOUCH is not set
-# CONFIG_USB_EGALAX is not set
-# CONFIG_USB_XPAD is not set
-# CONFIG_USB_ATI_REMOTE is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+CONFIG_USB_LIBUSUAL=y
#
# USB Imaging devices
#
+# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
#
-# USB Multimedia devices
-#
-# CONFIG_USB_DABUSB is not set
-
-#
-# Video4Linux support is needed for USB Multimedia device support
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_USB_MON is not set
-
-#
# USB port drivers
#
-
-#
-# USB Serial Converter support
-#
# CONFIG_USB_SERIAL is not set
#
@@ -579,55 +942,129 @@
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGETKIT is not set
-# CONFIG_USB_PHIDGETSERVO is not set
# CONFIG_USB_IDMOUSE is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
# CONFIG_USB_GADGET is not set
#
-# MMC/SD Card support
+# OTG and related infrastructure
#
-# CONFIG_MMC is not set
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+# CONFIG_MMC_SDHCI is not set
+CONFIG_MMC_AT91=y
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_NEW_LEDS is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_RTC_DRV_AT91RM9200=y
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
#
# File systems
#
CONFIG_EXT2_FS=y
-CONFIG_EXT2_FS_XATTR=y
-# CONFIG_EXT2_FS_POSIX_ACL is not set
-# CONFIG_EXT2_FS_SECURITY is not set
+# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4_FS is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_DNOTIFY is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
#
-# XFS support
+# Caches
#
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-CONFIG_AUTOFS_FS=y
-CONFIG_AUTOFS4_FS=y
+# CONFIG_FSCACHE is not set
#
# CD-ROM/DVD Filesystems
@@ -639,7 +1076,7 @@
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=y
-CONFIG_MSDOS_FS=y
+# CONFIG_MSDOS_FS is not set
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
@@ -649,53 +1086,70 @@
# Pseudo filesystems
#
CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
-CONFIG_DEVPTS_FS_XATTR=y
-# CONFIG_DEVPTS_FS_SECURITY is not set
CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
+# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_CONFIGFS_FS=y
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_UBIFS_FS is not set
# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+# CONFIG_NILFS2_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFSD is not set
+# CONFIG_NFS_V4 is not set
CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="utf8"
+CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
@@ -719,7 +1173,7 @@
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
-CONFIG_NLS_ASCII=y
+# CONFIG_NLS_ASCII is not set
# CONFIG_NLS_ISO8859_1 is not set
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
@@ -733,47 +1187,119 @@
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
+CONFIG_NLS_UTF8=y
+# CONFIG_DLM is not set
#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
-# CONFIG_MAGIC_SYSRQ is not set
-CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+# CONFIG_SCHED_DEBUG is not set
# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_PREEMPT is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_FS is not set
-CONFIG_FRAME_POINTER=y
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_ERRORS=y
-CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_PREEMPT_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_ARM_UNWIND=y
+# CONFIG_DEBUG_USER is not set
+# CONFIG_DEBUG_ERRORS is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_LL is not set
#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
# CONFIG_CRYPTO is not set
-
-#
-# Hardware crypto devices
-#
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
+CONFIG_AUDIT_GENERIC=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/arm/configs/s3c2410_defconfig b/arch/arm/configs/s3c2410_defconfig
index 2d58b8f..b498104 100644
--- a/arch/arm/configs/s3c2410_defconfig
+++ b/arch/arm/configs/s3c2410_defconfig
@@ -260,6 +260,7 @@
CONFIG_SMDK2440_CPU2440=y
CONFIG_MACH_AT2440EVB=y
CONFIG_CPU_S3C2442=y
+CONFIG_MACH_MINI2440=y
#
# S3C2442 Machines
@@ -2298,7 +2299,6 @@
# CONFIG_DEBUG_STACK_USAGE is not set
CONFIG_DEBUG_LL=y
# CONFIG_DEBUG_ICEDCC is not set
-CONFIG_DEBUG_S3C_PORT=y
CONFIG_DEBUG_S3C_UART=0
#
diff --git a/arch/arm/configs/s3c6400_defconfig b/arch/arm/configs/s3c6400_defconfig
index 2e8fa50..3286060 100644
--- a/arch/arm/configs/s3c6400_defconfig
+++ b/arch/arm/configs/s3c6400_defconfig
@@ -816,7 +816,6 @@
# CONFIG_DEBUG_STACK_USAGE is not set
CONFIG_DEBUG_LL=y
# CONFIG_DEBUG_ICEDCC is not set
-CONFIG_DEBUG_S3C_PORT=y
CONFIG_DEBUG_S3C_UART=0
#
diff --git a/arch/arm/configs/tct_hammer_defconfig b/arch/arm/configs/tct_hammer_defconfig
index 07dfb98..9d32fae 100644
--- a/arch/arm/configs/tct_hammer_defconfig
+++ b/arch/arm/configs/tct_hammer_defconfig
@@ -857,7 +857,6 @@
# CONFIG_DEBUG_STACK_USAGE is not set
CONFIG_DEBUG_LL=y
# CONFIG_DEBUG_ICEDCC is not set
-# CONFIG_DEBUG_S3C_PORT is not set
CONFIG_DEBUG_S3C_UART=0
#
diff --git a/arch/arm/configs/u300_defconfig b/arch/arm/configs/u300_defconfig
index 2d827e1..4762d90 100644
--- a/arch/arm/configs/u300_defconfig
+++ b/arch/arm/configs/u300_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc6
-# Mon Jun 1 09:18:22 2009
+# Linux kernel version: 2.6.31-rc1
+# Thu Jul 2 00:16:59 2009
#
CONFIG_ARM=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
@@ -9,7 +9,7 @@
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
+CONFIG_HAVE_TCM=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
@@ -18,13 +18,12 @@
CONFIG_HARDIRQS_SW_RESEND=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_VECTORS_BASE=0xffff0000
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
@@ -68,7 +67,6 @@
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
@@ -81,8 +79,13 @@
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
# CONFIG_AIO is not set
+
+#
+# Performance Counters
+#
# CONFIG_VM_EVENT_COUNTERS is not set
CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
@@ -94,6 +97,10 @@
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
# CONFIG_SLOW_WORK is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
@@ -106,7 +113,7 @@
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
@@ -138,9 +145,9 @@
# CONFIG_ARCH_EP93XX is not set
# CONFIG_ARCH_FOOTBRIDGE is not set
# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
# CONFIG_ARCH_NETX is not set
# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
# CONFIG_ARCH_IOP13XX is not set
# CONFIG_ARCH_IOP32X is not set
# CONFIG_ARCH_IOP33X is not set
@@ -216,8 +223,8 @@
# CONFIG_CPU_DCACHE_DISABLE is not set
# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-# CONFIG_OUTER_CACHE is not set
CONFIG_ARM_VIC=y
+CONFIG_ARM_VIC_NR=2
CONFIG_COMMON_CLKDEV=y
#
@@ -243,7 +250,6 @@
CONFIG_HZ=100
CONFIG_AEABI=y
CONFIG_OABI_COMPAT=y
-CONFIG_ARCH_FLATMEM_HAS_HOLES=y
# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
# CONFIG_HIGHMEM is not set
@@ -258,17 +264,18 @@
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
#
# Boot options
#
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="root=/dev/mtdblock2 rw rootfstype=yaffs2 console=ttyAMA0,115200n8 ab3100.force=0,0x48 mtdparts=u300nand:128k@0x0(bootrecords)ro,8064k@128k(free)ro,253952k@8192k(platform) lpj=515072"
+CONFIG_CMDLINE="root=/dev/ram0 rw rootfstype=rootfs console=ttyAMA0,115200n8 lpj=515072"
# CONFIG_XIP_KERNEL is not set
# CONFIG_KEXEC is not set
@@ -359,6 +366,7 @@
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
@@ -497,6 +505,7 @@
# CONFIG_EEPROM_AT24 is not set
# CONFIG_EEPROM_AT25 is not set
# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
# CONFIG_EEPROM_93CX6 is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
@@ -538,6 +547,7 @@
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_LM8323 is not set
# CONFIG_KEYBOARD_GPIO is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
@@ -597,9 +607,11 @@
#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
+# CONFIG_I2C_DESIGNWARE is not set
# CONFIG_I2C_GPIO is not set
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_SIMTEC is not set
+CONFIG_I2C_STU300=y
#
# External I2C/SMBus adapter drivers
@@ -620,7 +632,6 @@
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
@@ -635,6 +646,7 @@
#
# CONFIG_SPI_BITBANG is not set
# CONFIG_SPI_GPIO is not set
+CONFIG_SPI_PL022=y
#
# SPI Protocol Masters
@@ -647,6 +659,7 @@
# CONFIG_PDA_POWER is not set
# CONFIG_BATTERY_DS2760 is not set
# CONFIG_BATTERY_BQ27x00 is not set
+# CONFIG_BATTERY_MAX17040 is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
# CONFIG_THERMAL_HWMON is not set
@@ -657,6 +670,7 @@
# Watchdog Device Drivers
#
# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_COH901327_WATCHDOG=y
CONFIG_SSB_POSSIBLE=y
#
@@ -678,22 +692,9 @@
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
+CONFIG_AB3100_CORE=y
+# CONFIG_EZX_PCAP is not set
+# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
@@ -760,6 +761,11 @@
# CONFIG_SND_VERBOSE_PROCFS is not set
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
+# CONFIG_SND_RAWMIDI_SEQ is not set
+# CONFIG_SND_OPL3_LIB_SEQ is not set
+# CONFIG_SND_OPL4_LIB_SEQ is not set
+# CONFIG_SND_SBAWE_SEQ is not set
+# CONFIG_SND_EMU10K1_SEQ is not set
# CONFIG_SND_DRIVERS is not set
# CONFIG_SND_ARM is not set
# CONFIG_SND_SPI is not set
@@ -770,7 +776,7 @@
# CONFIG_HID_SUPPORT is not set
# CONFIG_USB_SUPPORT is not set
CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
+CONFIG_MMC_DEBUG=y
# CONFIG_MMC_UNSAFE_RESUME is not set
#
@@ -797,7 +803,7 @@
#
# CONFIG_LEDS_PCA9532 is not set
# CONFIG_LEDS_GPIO is not set
-# CONFIG_LEDS_LP5521 is not set
+# CONFIG_LEDS_LP3944 is not set
# CONFIG_LEDS_PCA955X is not set
# CONFIG_LEDS_DAC124S085 is not set
# CONFIG_LEDS_BD2802 is not set
@@ -845,6 +851,7 @@
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
#
# SPI RTC drivers
@@ -887,7 +894,10 @@
# CONFIG_REGULATOR_DEBUG is not set
# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
+# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
# CONFIG_REGULATOR_BQ24022 is not set
+# CONFIG_REGULATOR_MAX1586 is not set
+# CONFIG_REGULATOR_LP3971 is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
@@ -900,16 +910,20 @@
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
# CONFIG_DNOTIFY is not set
# CONFIG_INOTIFY is not set
+CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
CONFIG_FUSE_FS=y
+# CONFIG_CUSE is not set
#
# Caches
@@ -1033,6 +1047,7 @@
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
# CONFIG_DEBUG_PREEMPT is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
@@ -1063,18 +1078,16 @@
# CONFIG_PAGE_POISONING is not set
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
+CONFIG_FTRACE=y
# CONFIG_FUNCTION_TRACER is not set
# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_PREEMPT_TRACER is not set
# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
# CONFIG_STACK_TRACER is not set
# CONFIG_KMEMTRACE is not set
# CONFIG_WORKQUEUE_TRACER is not set
@@ -1109,6 +1122,7 @@
# CONFIG_CRC32 is not set
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
+CONFIG_GENERIC_ALLOCATOR=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
diff --git a/arch/arm/include/asm/page.h b/arch/arm/include/asm/page.h
index be962c1..9c746af 100644
--- a/arch/arm/include/asm/page.h
+++ b/arch/arm/include/asm/page.h
@@ -12,7 +12,7 @@
/* PAGE_SHIFT determines the page size */
#define PAGE_SHIFT 12
-#define PAGE_SIZE (1UL << PAGE_SHIFT)
+#define PAGE_SIZE (_AC(1,UL) << PAGE_SHIFT)
#define PAGE_MASK (~(PAGE_SIZE-1))
#ifndef __ASSEMBLY__
diff --git a/arch/arm/include/asm/pgtable.h b/arch/arm/include/asm/pgtable.h
index 1cd2d64..c433c6c 100644
--- a/arch/arm/include/asm/pgtable.h
+++ b/arch/arm/include/asm/pgtable.h
@@ -285,15 +285,6 @@
#define pte_young(pte) (pte_val(pte) & L_PTE_YOUNG)
#define pte_special(pte) (0)
-/*
- * The following only works if pte_present() is not true.
- */
-#define pte_file(pte) (pte_val(pte) & L_PTE_FILE)
-#define pte_to_pgoff(x) (pte_val(x) >> 2)
-#define pgoff_to_pte(x) __pte(((x) << 2) | L_PTE_FILE)
-
-#define PTE_FILE_MAX_BITS 30
-
#define PTE_BIT_FUNC(fn,op) \
static inline pte_t pte_##fn(pte_t pte) { pte_val(pte) op; return pte; }
@@ -384,16 +375,50 @@
extern pgd_t swapper_pg_dir[PTRS_PER_PGD];
-/* Encode and decode a swap entry.
+/*
+ * Encode and decode a swap entry. Swap entries are stored in the Linux
+ * page tables as follows:
*
- * We support up to 32GB of swap on 4k machines
+ * 3 3 2 2 2 2 2 2 2 2 2 2 1 1 1 1 1 1 1 1 1 1
+ * 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0
+ * <--------------- offset --------------------> <--- type --> 0 0
+ *
+ * This gives us up to 127 swap files and 32GB per swap file. Note that
+ * the offset field is always non-zero.
*/
-#define __swp_type(x) (((x).val >> 2) & 0x7f)
-#define __swp_offset(x) ((x).val >> 9)
-#define __swp_entry(type,offset) ((swp_entry_t) { ((type) << 2) | ((offset) << 9) })
+#define __SWP_TYPE_SHIFT 2
+#define __SWP_TYPE_BITS 7
+#define __SWP_TYPE_MASK ((1 << __SWP_TYPE_BITS) - 1)
+#define __SWP_OFFSET_SHIFT (__SWP_TYPE_BITS + __SWP_TYPE_SHIFT)
+
+#define __swp_type(x) (((x).val >> __SWP_TYPE_SHIFT) & __SWP_TYPE_MASK)
+#define __swp_offset(x) ((x).val >> __SWP_OFFSET_SHIFT)
+#define __swp_entry(type,offset) ((swp_entry_t) { ((type) << __SWP_TYPE_SHIFT) | ((offset) << __SWP_OFFSET_SHIFT) })
+
#define __pte_to_swp_entry(pte) ((swp_entry_t) { pte_val(pte) })
#define __swp_entry_to_pte(swp) ((pte_t) { (swp).val })
+/*
+ * It is an error for the kernel to have more swap files than we can
+ * encode in the PTEs. This ensures that we know when MAX_SWAPFILES
+ * is increased beyond what we presently support.
+ */
+#define MAX_SWAPFILES_CHECK() BUILD_BUG_ON(MAX_SWAPFILES_SHIFT > __SWP_TYPE_BITS)
+
+/*
+ * Encode and decode a file entry. File entries are stored in the Linux
+ * page tables as follows:
+ *
+ * 3 3 2 2 2 2 2 2 2 2 2 2 1 1 1 1 1 1 1 1 1 1
+ * 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0
+ * <------------------------ offset -------------------------> 1 0
+ */
+#define pte_file(pte) (pte_val(pte) & L_PTE_FILE)
+#define pte_to_pgoff(x) (pte_val(x) >> 2)
+#define pgoff_to_pte(x) __pte(((x) << 2) | L_PTE_FILE)
+
+#define PTE_FILE_MAX_BITS 30
+
/* Needs to be defined here and not in linux/mm.h, as it is arch dependent */
/* FIXME: this is not correct */
#define kern_addr_valid(addr) (1)
diff --git a/arch/arm/include/asm/thread_info.h b/arch/arm/include/asm/thread_info.h
index 4f88482..73394e5 100644
--- a/arch/arm/include/asm/thread_info.h
+++ b/arch/arm/include/asm/thread_info.h
@@ -73,7 +73,7 @@
.task = &tsk, \
.exec_domain = &default_exec_domain, \
.flags = 0, \
- .preempt_count = 1, \
+ .preempt_count = INIT_PREEMPT_COUNT, \
.addr_limit = KERNEL_DS, \
.cpu_domain = domain_val(DOMAIN_USER, DOMAIN_MANAGER) | \
domain_val(DOMAIN_KERNEL, DOMAIN_MANAGER) | \
diff --git a/arch/arm/kernel/irq.c b/arch/arm/kernel/irq.c
index 096f600..b7c3490 100644
--- a/arch/arm/kernel/irq.c
+++ b/arch/arm/kernel/irq.c
@@ -98,17 +98,6 @@
return 0;
}
-/* Handle bad interrupts */
-static struct irq_desc bad_irq_desc = {
- .handle_irq = handle_bad_irq,
- .lock = __SPIN_LOCK_UNLOCKED(bad_irq_desc.lock),
-};
-
-#ifdef CONFIG_CPUMASK_OFFSTACK
-/* We are not allocating bad_irq_desc.affinity or .pending_mask */
-#error "ARM architecture does not support CONFIG_CPUMASK_OFFSTACK."
-#endif
-
/*
* do_IRQ handles all hardware IRQ's. Decoded IRQs should not
* come via this function. Instead, they should provide their
@@ -124,10 +113,13 @@
* Some hardware gives randomly wrong interrupts. Rather
* than crashing, do something sensible.
*/
- if (irq >= NR_IRQS)
- handle_bad_irq(irq, &bad_irq_desc);
- else
+ if (unlikely(irq >= NR_IRQS)) {
+ if (printk_ratelimit())
+ printk(KERN_WARNING "Bad IRQ%u\n", irq);
+ ack_bad_irq(irq);
+ } else {
generic_handle_irq(irq);
+ }
/* AT91 specific workaround */
irq_finish(irq);
@@ -165,10 +157,6 @@
for (irq = 0; irq < NR_IRQS; irq++)
irq_desc[irq].status |= IRQ_NOREQUEST | IRQ_NOPROBE;
-#ifdef CONFIG_SMP
- cpumask_setall(bad_irq_desc.affinity);
- bad_irq_desc.node = smp_processor_id();
-#endif
init_arch_irq();
}
diff --git a/arch/arm/kernel/vmlinux.lds.S b/arch/arm/kernel/vmlinux.lds.S
index 4340bf3..6937102 100644
--- a/arch/arm/kernel/vmlinux.lds.S
+++ b/arch/arm/kernel/vmlinux.lds.S
@@ -6,6 +6,7 @@
#include <asm-generic/vmlinux.lds.h>
#include <asm/thread_info.h>
#include <asm/memory.h>
+#include <asm/page.h>
OUTPUT_ARCH(arm)
ENTRY(stext)
@@ -63,7 +64,7 @@
usr/built-in.o(.init.ramfs)
__initramfs_end = .;
#endif
- . = ALIGN(4096);
+ . = ALIGN(PAGE_SIZE);
__per_cpu_load = .;
__per_cpu_start = .;
*(.data.percpu.page_aligned)
@@ -73,7 +74,7 @@
#ifndef CONFIG_XIP_KERNEL
__init_begin = _stext;
INIT_DATA
- . = ALIGN(4096);
+ . = ALIGN(PAGE_SIZE);
__init_end = .;
#endif
}
@@ -118,7 +119,7 @@
*(.got) /* Global offset table */
}
- RODATA
+ RO_DATA(PAGE_SIZE)
_etext = .; /* End of text and rodata section */
@@ -158,17 +159,17 @@
*(.data.init_task)
#ifdef CONFIG_XIP_KERNEL
- . = ALIGN(4096);
+ . = ALIGN(PAGE_SIZE);
__init_begin = .;
INIT_DATA
- . = ALIGN(4096);
+ . = ALIGN(PAGE_SIZE);
__init_end = .;
#endif
- . = ALIGN(4096);
+ . = ALIGN(PAGE_SIZE);
__nosave_begin = .;
*(.data.nosave)
- . = ALIGN(4096);
+ . = ALIGN(PAGE_SIZE);
__nosave_end = .;
/*
diff --git a/arch/arm/mach-at91/board-sam9g20ek.c b/arch/arm/mach-at91/board-sam9g20ek.c
index cc270be..a55398e 100644
--- a/arch/arm/mach-at91/board-sam9g20ek.c
+++ b/arch/arm/mach-at91/board-sam9g20ek.c
@@ -24,6 +24,8 @@
#include <linux/platform_device.h>
#include <linux/spi/spi.h>
#include <linux/spi/at73c213.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
#include <linux/clk.h>
#include <mach/hardware.h>
@@ -218,6 +220,56 @@
}
};
+
+/*
+ * GPIO Buttons
+ */
+#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
+static struct gpio_keys_button ek_buttons[] = {
+ {
+ .gpio = AT91_PIN_PA30,
+ .code = BTN_3,
+ .desc = "Button 3",
+ .active_low = 1,
+ .wakeup = 1,
+ },
+ {
+ .gpio = AT91_PIN_PA31,
+ .code = BTN_4,
+ .desc = "Button 4",
+ .active_low = 1,
+ .wakeup = 1,
+ }
+};
+
+static struct gpio_keys_platform_data ek_button_data = {
+ .buttons = ek_buttons,
+ .nbuttons = ARRAY_SIZE(ek_buttons),
+};
+
+static struct platform_device ek_button_device = {
+ .name = "gpio-keys",
+ .id = -1,
+ .num_resources = 0,
+ .dev = {
+ .platform_data = &ek_button_data,
+ }
+};
+
+static void __init ek_add_device_buttons(void)
+{
+ at91_set_gpio_input(AT91_PIN_PA30, 1); /* btn3 */
+ at91_set_deglitch(AT91_PIN_PA30, 1);
+ at91_set_gpio_input(AT91_PIN_PA31, 1); /* btn4 */
+ at91_set_deglitch(AT91_PIN_PA31, 1);
+
+ platform_device_register(&ek_button_device);
+}
+#else
+static void __init ek_add_device_buttons(void) {}
+#endif
+
+
static struct i2c_board_info __initdata ek_i2c_devices[] = {
{
I2C_BOARD_INFO("24c512", 0x50),
@@ -245,6 +297,8 @@
at91_add_device_i2c(ek_i2c_devices, ARRAY_SIZE(ek_i2c_devices));
/* LEDs */
at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
+ /* Push Buttons */
+ ek_add_device_buttons();
/* PCK0 provides MCLK to the WM8731 */
at91_set_B_periph(AT91_PIN_PC1, 0);
/* SSC (for WM8731) */
diff --git a/arch/arm/mach-at91/board-sam9rlek.c b/arch/arm/mach-at91/board-sam9rlek.c
index 35e12a4..f6b5672 100644
--- a/arch/arm/mach-at91/board-sam9rlek.c
+++ b/arch/arm/mach-at91/board-sam9rlek.c
@@ -186,19 +186,21 @@
static void at91_lcdc_power_control(int on)
{
if (on)
- at91_set_gpio_value(AT91_PIN_PA30, 0); /* power up */
+ at91_set_gpio_value(AT91_PIN_PC1, 0); /* power up */
else
- at91_set_gpio_value(AT91_PIN_PA30, 1); /* power down */
+ at91_set_gpio_value(AT91_PIN_PC1, 1); /* power down */
}
/* Driver datas */
static struct atmel_lcdfb_info __initdata ek_lcdc_data = {
+ .lcdcon_is_backlight = true,
.default_bpp = 16,
.default_dmacon = ATMEL_LCDC_DMAEN,
.default_lcdcon2 = AT91SAM9RL_DEFAULT_LCDCON2,
.default_monspecs = &at91fb_default_monspecs,
.atmel_lcdfb_power_control = at91_lcdc_power_control,
.guard_time = 1,
+ .lcd_wiring_mode = ATMEL_LCDC_WIRING_RGB,
};
#else
diff --git a/arch/arm/mach-omap1/board-nokia770.c b/arch/arm/mach-omap1/board-nokia770.c
index e70fc7c..ed2a48a 100644
--- a/arch/arm/mach-omap1/board-nokia770.c
+++ b/arch/arm/mach-omap1/board-nokia770.c
@@ -36,7 +36,6 @@
#include <mach/hwa742.h>
#include <mach/lcd_mipid.h>
#include <mach/mmc.h>
-#include <mach/usb.h>
#include <mach/clock.h>
#define ADS7846_PENDOWN_GPIO 15
@@ -205,9 +204,11 @@
static struct omap_mmc_platform_data nokia770_mmc2_data = {
.nr_slots = 1,
.dma_mask = 0xffffffff,
+ .max_freq = 12000000,
.slots[0] = {
.set_power = nokia770_mmc_set_power,
.get_cover_state = nokia770_mmc_get_cover_state,
+ .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
.name = "mmcblk",
},
};
diff --git a/arch/arm/mach-omap1/mailbox.c b/arch/arm/mach-omap1/mailbox.c
index 0af4d6c..6810b4a 100644
--- a/arch/arm/mach-omap1/mailbox.c
+++ b/arch/arm/mach-omap1/mailbox.c
@@ -203,5 +203,5 @@
MODULE_LICENSE("GPL v2");
MODULE_DESCRIPTION("omap mailbox: omap1 architecture specific functions");
-MODULE_AUTHOR("Hiroshi DOYU" <Hiroshi.DOYU@nokia.com>);
+MODULE_AUTHOR("Hiroshi DOYU <Hiroshi.DOYU@nokia.com>");
MODULE_ALIAS("platform:omap1-mailbox");
diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c
index da93b86..9a0bf67 100644
--- a/arch/arm/mach-omap2/board-rx51-peripherals.c
+++ b/arch/arm/mach-omap2/board-rx51-peripherals.c
@@ -362,6 +362,7 @@
.gpio_irq = 65,
.parts = onenand_partitions,
.nr_parts = ARRAY_SIZE(onenand_partitions),
+ .flags = ONENAND_SYNC_READWRITE,
};
static void __init board_onenand_init(void)
diff --git a/arch/arm/mach-omap2/gpmc-onenand.c b/arch/arm/mach-omap2/gpmc-onenand.c
index 2fd22f9..54fec53 100644
--- a/arch/arm/mach-omap2/gpmc-onenand.c
+++ b/arch/arm/mach-omap2/gpmc-onenand.c
@@ -31,6 +31,8 @@
static int omap2_onenand_set_async_mode(int cs, void __iomem *onenand_base)
{
struct gpmc_timings t;
+ u32 reg;
+ int err;
const int t_cer = 15;
const int t_avdp = 12;
@@ -43,6 +45,11 @@
const int t_wpl = 40;
const int t_wph = 30;
+ /* Ensure sync read and sync write are disabled */
+ reg = readw(onenand_base + ONENAND_REG_SYS_CFG1);
+ reg &= ~ONENAND_SYS_CFG1_SYNC_READ & ~ONENAND_SYS_CFG1_SYNC_WRITE;
+ writew(reg, onenand_base + ONENAND_REG_SYS_CFG1);
+
memset(&t, 0, sizeof(t));
t.sync_clk = 0;
t.cs_on = 0;
@@ -74,7 +81,16 @@
GPMC_CONFIG1_DEVICESIZE_16 |
GPMC_CONFIG1_MUXADDDATA);
- return gpmc_cs_set_timings(cs, &t);
+ err = gpmc_cs_set_timings(cs, &t);
+ if (err)
+ return err;
+
+ /* Ensure sync read and sync write are disabled */
+ reg = readw(onenand_base + ONENAND_REG_SYS_CFG1);
+ reg &= ~ONENAND_SYS_CFG1_SYNC_READ & ~ONENAND_SYS_CFG1_SYNC_WRITE;
+ writew(reg, onenand_base + ONENAND_REG_SYS_CFG1);
+
+ return 0;
}
static void set_onenand_cfg(void __iomem *onenand_base, int latency,
@@ -124,7 +140,8 @@
} else if (cfg->flags & ONENAND_SYNC_READWRITE) {
sync_read = 1;
sync_write = 1;
- }
+ } else
+ return omap2_onenand_set_async_mode(cs, onenand_base);
if (!freq) {
/* Very first call freq is not known */
diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c
index 458990e..a98201c 100644
--- a/arch/arm/mach-omap2/id.c
+++ b/arch/arm/mach-omap2/id.c
@@ -48,6 +48,28 @@
}
EXPORT_SYMBOL(omap_chip_is);
+int omap_type(void)
+{
+ u32 val = 0;
+
+ if (cpu_is_omap24xx())
+ val = omap_ctrl_readl(OMAP24XX_CONTROL_STATUS);
+ else if (cpu_is_omap34xx())
+ val = omap_ctrl_readl(OMAP343X_CONTROL_STATUS);
+ else {
+ pr_err("Cannot detect omap type!\n");
+ goto out;
+ }
+
+ val &= OMAP2_DEVICETYPE_MASK;
+ val >>= 8;
+
+out:
+ return val;
+}
+EXPORT_SYMBOL(omap_type);
+
+
/*----------------------------------------------------------------------------*/
#define OMAP_TAP_IDCODE 0x0204
diff --git a/arch/arm/mach-omap2/mailbox.c b/arch/arm/mach-omap2/mailbox.c
index fd5b8a5..6f71f37 100644
--- a/arch/arm/mach-omap2/mailbox.c
+++ b/arch/arm/mach-omap2/mailbox.c
@@ -282,12 +282,12 @@
return -ENOMEM;
/* DSP or IVA2 IRQ */
- mbox_dsp_info.irq = platform_get_irq(pdev, 0);
- if (mbox_dsp_info.irq < 0) {
+ ret = platform_get_irq(pdev, 0);
+ if (ret < 0) {
dev_err(&pdev->dev, "invalid irq resource\n");
- ret = -ENODEV;
goto err_dsp;
}
+ mbox_dsp_info.irq = ret;
ret = omap_mbox_register(&pdev->dev, &mbox_dsp_info);
if (ret)
diff --git a/arch/arm/mach-omap2/mmc-twl4030.c b/arch/arm/mach-omap2/mmc-twl4030.c
index 9756a87..1541fd4 100644
--- a/arch/arm/mach-omap2/mmc-twl4030.c
+++ b/arch/arm/mach-omap2/mmc-twl4030.c
@@ -263,8 +263,19 @@
static int twl_mmc23_set_power(struct device *dev, int slot, int power_on, int vdd)
{
int ret = 0;
- struct twl_mmc_controller *c = &hsmmc[1];
+ struct twl_mmc_controller *c = NULL;
struct omap_mmc_platform_data *mmc = dev->platform_data;
+ int i;
+
+ for (i = 1; i < ARRAY_SIZE(hsmmc); i++) {
+ if (mmc == hsmmc[i].mmc) {
+ c = &hsmmc[i];
+ break;
+ }
+ }
+
+ if (c == NULL)
+ return -ENODEV;
/* If we don't see a Vcc regulator, assume it's a fixed
* voltage always-on regulator.
diff --git a/arch/arm/mach-s3c2440/mach-mini2440.c b/arch/arm/mach-s3c2440/mach-mini2440.c
index 6a5bc30..ec71a69 100644
--- a/arch/arm/mach-s3c2440/mach-mini2440.c
+++ b/arch/arm/mach-s3c2440/mach-mini2440.c
@@ -48,8 +48,6 @@
#include <plat/mci.h>
#include <plat/udc.h>
-#include <plat/regs-serial.h>
-
#include <linux/mtd/mtd.h>
#include <linux/mtd/nand.h>
#include <linux/mtd/nand_ecc.h>
@@ -275,6 +273,7 @@
.nr_chips = 1,
.nr_partitions = ARRAY_SIZE(mini2440_default_nand_part),
.partitions = mini2440_default_nand_part,
+ .flash_bbt = 1, /* we use u-boot to create a BBT */
},
};
diff --git a/arch/arm/mach-s3c2442/mach-gta02.c b/arch/arm/mach-s3c2442/mach-gta02.c
index e23b581..0fb385b 100644
--- a/arch/arm/mach-s3c2442/mach-gta02.c
+++ b/arch/arm/mach-s3c2442/mach-gta02.c
@@ -433,8 +433,7 @@
*/
.name = "neo1973-nand",
.nr_chips = 1,
- .use_bbt = 1,
- .force_soft_ecc = 1,
+ .flash_bbt = 1,
},
};
diff --git a/arch/arm/mach-u300/clock.c b/arch/arm/mach-u300/clock.c
index 5cd04d6..111f7ea 100644
--- a/arch/arm/mach-u300/clock.c
+++ b/arch/arm/mach-u300/clock.c
@@ -24,6 +24,7 @@
#include <linux/init.h>
#include <linux/timer.h>
#include <linux/io.h>
+#include <linux/seq_file.h>
#include <asm/clkdev.h>
#include <mach/hardware.h>
@@ -702,6 +703,7 @@
.rate = 52000000, /* this varies! */
.hw_ctrld = true,
.reset = false,
+ .lock = __SPIN_LOCK_UNLOCKED(amba_clk.lock),
};
/*
@@ -720,6 +722,7 @@
.set_rate = clk_set_rate_cpuclk,
.get_rate = clk_get_rate_cpuclk,
.round_rate = clk_round_rate_cpuclk,
+ .lock = __SPIN_LOCK_UNLOCKED(cpu_clk.lock),
};
static struct clk nandif_clk = {
@@ -732,6 +735,7 @@
.clk_val = U300_SYSCON_SBCER_NANDIF_CLK_EN,
.enable = syscon_clk_enable,
.disable = syscon_clk_disable,
+ .lock = __SPIN_LOCK_UNLOCKED(nandif_clk.lock),
};
static struct clk semi_clk = {
@@ -744,6 +748,7 @@
.clk_val = U300_SYSCON_SBCER_SEMI_CLK_EN,
.enable = syscon_clk_enable,
.disable = syscon_clk_disable,
+ .lock = __SPIN_LOCK_UNLOCKED(semi_clk.lock),
};
#ifdef CONFIG_MACH_U300_BS335
@@ -758,6 +763,7 @@
.clk_val = U300_SYSCON_SBCER_ISP_CLK_EN,
.enable = syscon_clk_enable,
.disable = syscon_clk_disable,
+ .lock = __SPIN_LOCK_UNLOCKED(isp_clk.lock),
};
static struct clk cds_clk = {
@@ -771,6 +777,7 @@
.clk_val = U300_SYSCON_SBCER_CDS_CLK_EN,
.enable = syscon_clk_enable,
.disable = syscon_clk_disable,
+ .lock = __SPIN_LOCK_UNLOCKED(cds_clk.lock),
};
#endif
@@ -785,6 +792,7 @@
.clk_val = U300_SYSCON_SBCER_DMAC_CLK_EN,
.enable = syscon_clk_enable,
.disable = syscon_clk_disable,
+ .lock = __SPIN_LOCK_UNLOCKED(dma_clk.lock),
};
static struct clk aaif_clk = {
@@ -798,6 +806,7 @@
.clk_val = U300_SYSCON_SBCER_AAIF_CLK_EN,
.enable = syscon_clk_enable,
.disable = syscon_clk_disable,
+ .lock = __SPIN_LOCK_UNLOCKED(aaif_clk.lock),
};
static struct clk apex_clk = {
@@ -811,6 +820,7 @@
.clk_val = U300_SYSCON_SBCER_APEX_CLK_EN,
.enable = syscon_clk_enable,
.disable = syscon_clk_disable,
+ .lock = __SPIN_LOCK_UNLOCKED(apex_clk.lock),
};
static struct clk video_enc_clk = {
@@ -825,6 +835,7 @@
.clk_val = U300_SYSCON_SBCER_VIDEO_ENC_CLK_EN,
.enable = syscon_clk_enable,
.disable = syscon_clk_disable,
+ .lock = __SPIN_LOCK_UNLOCKED(video_enc_clk.lock),
};
static struct clk xgam_clk = {
@@ -839,6 +850,7 @@
.get_rate = clk_get_rate_xgamclk,
.enable = syscon_clk_enable,
.disable = syscon_clk_disable,
+ .lock = __SPIN_LOCK_UNLOCKED(xgam_clk.lock),
};
/* This clock is used to activate the video encoder */
@@ -854,6 +866,7 @@
.enable = syscon_clk_enable,
.disable = syscon_clk_disable,
.get_rate = clk_get_rate_ahb_clk,
+ .lock = __SPIN_LOCK_UNLOCKED(ahb_clk.lock),
};
@@ -871,6 +884,7 @@
.enable = syscon_clk_enable,
.disable = syscon_clk_disable,
.get_rate = clk_get_rate_ahb_clk,
+ .lock = __SPIN_LOCK_UNLOCKED(ahb_subsys_clk.lock),
};
static struct clk intcon_clk = {
@@ -882,6 +896,8 @@
.res_reg = U300_SYSCON_VBASE + U300_SYSCON_RRR,
.res_mask = U300_SYSCON_RRR_INTCON_RESET_EN,
/* INTCON can be reset but not clock-gated */
+ .lock = __SPIN_LOCK_UNLOCKED(intcon_clk.lock),
+
};
static struct clk mspro_clk = {
@@ -895,6 +911,7 @@
.clk_val = U300_SYSCON_SBCER_MSPRO_CLK_EN,
.enable = syscon_clk_enable,
.disable = syscon_clk_disable,
+ .lock = __SPIN_LOCK_UNLOCKED(mspro_clk.lock),
};
static struct clk emif_clk = {
@@ -909,6 +926,7 @@
.enable = syscon_clk_enable,
.disable = syscon_clk_disable,
.get_rate = clk_get_rate_emif_clk,
+ .lock = __SPIN_LOCK_UNLOCKED(emif_clk.lock),
};
@@ -926,6 +944,7 @@
.clk_val = U300_SYSCON_SBCER_FAST_BRIDGE_CLK_EN,
.enable = syscon_clk_enable,
.disable = syscon_clk_disable,
+ .lock = __SPIN_LOCK_UNLOCKED(fast_clk.lock),
};
static struct clk mmcsd_clk = {
@@ -942,6 +961,7 @@
.round_rate = clk_round_rate_mclk,
.disable = syscon_clk_disable,
.enable = syscon_clk_enable,
+ .lock = __SPIN_LOCK_UNLOCKED(mmcsd_clk.lock),
};
static struct clk i2s0_clk = {
@@ -956,6 +976,7 @@
.enable = syscon_clk_enable,
.disable = syscon_clk_disable,
.get_rate = clk_get_rate_i2s_i2c_spi,
+ .lock = __SPIN_LOCK_UNLOCKED(i2s0_clk.lock),
};
static struct clk i2s1_clk = {
@@ -970,6 +991,7 @@
.enable = syscon_clk_enable,
.disable = syscon_clk_disable,
.get_rate = clk_get_rate_i2s_i2c_spi,
+ .lock = __SPIN_LOCK_UNLOCKED(i2s1_clk.lock),
};
static struct clk i2c0_clk = {
@@ -984,6 +1006,7 @@
.enable = syscon_clk_enable,
.disable = syscon_clk_disable,
.get_rate = clk_get_rate_i2s_i2c_spi,
+ .lock = __SPIN_LOCK_UNLOCKED(i2c0_clk.lock),
};
static struct clk i2c1_clk = {
@@ -998,6 +1021,7 @@
.enable = syscon_clk_enable,
.disable = syscon_clk_disable,
.get_rate = clk_get_rate_i2s_i2c_spi,
+ .lock = __SPIN_LOCK_UNLOCKED(i2c1_clk.lock),
};
static struct clk spi_clk = {
@@ -1012,6 +1036,7 @@
.enable = syscon_clk_enable,
.disable = syscon_clk_disable,
.get_rate = clk_get_rate_i2s_i2c_spi,
+ .lock = __SPIN_LOCK_UNLOCKED(spi_clk.lock),
};
#ifdef CONFIG_MACH_U300_BS335
@@ -1026,6 +1051,7 @@
.clk_val = U300_SYSCON_SBCER_UART1_CLK_EN,
.enable = syscon_clk_enable,
.disable = syscon_clk_disable,
+ .lock = __SPIN_LOCK_UNLOCKED(uart1_clk.lock),
};
#endif
@@ -1044,6 +1070,7 @@
.clk_val = U300_SYSCON_SBCER_SLOW_BRIDGE_CLK_EN,
.enable = syscon_clk_enable,
.disable = syscon_clk_disable,
+ .lock = __SPIN_LOCK_UNLOCKED(slow_clk.lock),
};
/* TODO: implement SYSCON clock? */
@@ -1055,6 +1082,7 @@
.rate = 32768,
.reset = false,
/* This is always on, cannot be enabled/disabled or reset */
+ .lock = __SPIN_LOCK_UNLOCKED(wdog_clk.lock),
};
/* This one is hardwired to PLL13 */
@@ -1069,6 +1097,7 @@
.clk_val = U300_SYSCON_SBCER_UART_CLK_EN,
.enable = syscon_clk_enable,
.disable = syscon_clk_disable,
+ .lock = __SPIN_LOCK_UNLOCKED(uart_clk.lock),
};
static struct clk keypad_clk = {
@@ -1082,6 +1111,7 @@
.clk_val = U300_SYSCON_SBCER_KEYPAD_CLK_EN,
.enable = syscon_clk_enable,
.disable = syscon_clk_disable,
+ .lock = __SPIN_LOCK_UNLOCKED(keypad_clk.lock),
};
static struct clk gpio_clk = {
@@ -1095,6 +1125,7 @@
.clk_val = U300_SYSCON_SBCER_GPIO_CLK_EN,
.enable = syscon_clk_enable,
.disable = syscon_clk_disable,
+ .lock = __SPIN_LOCK_UNLOCKED(gpio_clk.lock),
};
static struct clk rtc_clk = {
@@ -1106,6 +1137,7 @@
.res_reg = U300_SYSCON_VBASE + U300_SYSCON_RSR,
.res_mask = U300_SYSCON_RSR_RTC_RESET_EN,
/* This clock is always on, cannot be enabled/disabled */
+ .lock = __SPIN_LOCK_UNLOCKED(rtc_clk.lock),
};
static struct clk bustr_clk = {
@@ -1119,6 +1151,7 @@
.clk_val = U300_SYSCON_SBCER_BTR_CLK_EN,
.enable = syscon_clk_enable,
.disable = syscon_clk_disable,
+ .lock = __SPIN_LOCK_UNLOCKED(bustr_clk.lock),
};
static struct clk evhist_clk = {
@@ -1132,6 +1165,7 @@
.clk_val = U300_SYSCON_SBCER_EH_CLK_EN,
.enable = syscon_clk_enable,
.disable = syscon_clk_disable,
+ .lock = __SPIN_LOCK_UNLOCKED(evhist_clk.lock),
};
static struct clk timer_clk = {
@@ -1145,6 +1179,7 @@
.clk_val = U300_SYSCON_SBCER_ACC_TMR_CLK_EN,
.enable = syscon_clk_enable,
.disable = syscon_clk_disable,
+ .lock = __SPIN_LOCK_UNLOCKED(timer_clk.lock),
};
static struct clk app_timer_clk = {
@@ -1158,6 +1193,7 @@
.clk_val = U300_SYSCON_SBCER_APP_TMR_CLK_EN,
.enable = syscon_clk_enable,
.disable = syscon_clk_disable,
+ .lock = __SPIN_LOCK_UNLOCKED(app_timer_clk.lock),
};
#ifdef CONFIG_MACH_U300_BS335
@@ -1172,6 +1208,7 @@
.clk_val = U300_SYSCON_SBCER_PPM_CLK_EN,
.enable = syscon_clk_enable,
.disable = syscon_clk_disable,
+ .lock = __SPIN_LOCK_UNLOCKED(ppm_clk.lock),
};
#endif
@@ -1187,53 +1224,53 @@
*/
static struct clk_lookup lookups[] = {
/* Connected directly to the AMBA bus */
- DEF_LOOKUP("amba", &amba_clk),
- DEF_LOOKUP("cpu", &cpu_clk),
- DEF_LOOKUP("nandif", &nandif_clk),
- DEF_LOOKUP("semi", &semi_clk),
+ DEF_LOOKUP("amba", &amba_clk),
+ DEF_LOOKUP("cpu", &cpu_clk),
+ DEF_LOOKUP("fsmc", &nandif_clk),
+ DEF_LOOKUP("semi", &semi_clk),
#ifdef CONFIG_MACH_U300_BS335
- DEF_LOOKUP("isp", &isp_clk),
- DEF_LOOKUP("cds", &cds_clk),
+ DEF_LOOKUP("isp", &isp_clk),
+ DEF_LOOKUP("cds", &cds_clk),
#endif
- DEF_LOOKUP("dma", &dma_clk),
- DEF_LOOKUP("aaif", &aaif_clk),
- DEF_LOOKUP("apex", &apex_clk),
+ DEF_LOOKUP("dma", &dma_clk),
+ DEF_LOOKUP("msl", &aaif_clk),
+ DEF_LOOKUP("apex", &apex_clk),
DEF_LOOKUP("video_enc", &video_enc_clk),
- DEF_LOOKUP("xgam", &xgam_clk),
- DEF_LOOKUP("ahb", &ahb_clk),
+ DEF_LOOKUP("xgam", &xgam_clk),
+ DEF_LOOKUP("ahb", &ahb_clk),
/* AHB bridge clocks */
- DEF_LOOKUP("ahb", &ahb_subsys_clk),
- DEF_LOOKUP("intcon", &intcon_clk),
- DEF_LOOKUP("mspro", &mspro_clk),
- DEF_LOOKUP("pl172", &emif_clk),
+ DEF_LOOKUP("ahb_subsys", &ahb_subsys_clk),
+ DEF_LOOKUP("intcon", &intcon_clk),
+ DEF_LOOKUP("mspro", &mspro_clk),
+ DEF_LOOKUP("pl172", &emif_clk),
/* FAST bridge clocks */
- DEF_LOOKUP("fast", &fast_clk),
- DEF_LOOKUP("mmci", &mmcsd_clk),
+ DEF_LOOKUP("fast", &fast_clk),
+ DEF_LOOKUP("mmci", &mmcsd_clk),
/*
* The .0 and .1 identifiers on these comes from the platform device
* .id field and are assigned when the platform devices are registered.
*/
- DEF_LOOKUP("i2s.0", &i2s0_clk),
- DEF_LOOKUP("i2s.1", &i2s1_clk),
- DEF_LOOKUP("stddci2c.0", &i2c0_clk),
- DEF_LOOKUP("stddci2c.1", &i2c1_clk),
- DEF_LOOKUP("pl022", &spi_clk),
+ DEF_LOOKUP("i2s.0", &i2s0_clk),
+ DEF_LOOKUP("i2s.1", &i2s1_clk),
+ DEF_LOOKUP("stu300.0", &i2c0_clk),
+ DEF_LOOKUP("stu300.1", &i2c1_clk),
+ DEF_LOOKUP("pl022", &spi_clk),
#ifdef CONFIG_MACH_U300_BS335
- DEF_LOOKUP("uart1", &uart1_clk),
+ DEF_LOOKUP("uart1", &uart1_clk),
#endif
/* SLOW bridge clocks */
- DEF_LOOKUP("slow", &slow_clk),
- DEF_LOOKUP("wdog", &wdog_clk),
- DEF_LOOKUP("uart0", &uart_clk),
- DEF_LOOKUP("apptimer", &app_timer_clk),
- DEF_LOOKUP("keypad", &keypad_clk),
+ DEF_LOOKUP("slow", &slow_clk),
+ DEF_LOOKUP("coh901327_wdog", &wdog_clk),
+ DEF_LOOKUP("uart0", &uart_clk),
+ DEF_LOOKUP("apptimer", &app_timer_clk),
+ DEF_LOOKUP("coh901461-keypad", &keypad_clk),
DEF_LOOKUP("u300-gpio", &gpio_clk),
- DEF_LOOKUP("rtc0", &rtc_clk),
- DEF_LOOKUP("bustr", &bustr_clk),
- DEF_LOOKUP("evhist", &evhist_clk),
- DEF_LOOKUP("timer", &timer_clk),
+ DEF_LOOKUP("rtc-coh901331", &rtc_clk),
+ DEF_LOOKUP("bustr", &bustr_clk),
+ DEF_LOOKUP("evhist", &evhist_clk),
+ DEF_LOOKUP("timer", &timer_clk),
#ifdef CONFIG_MACH_U300_BS335
- DEF_LOOKUP("ppm", &ppm_clk),
+ DEF_LOOKUP("ppm", &ppm_clk),
#endif
};
@@ -1427,16 +1464,20 @@
.release = single_release,
};
-static void init_clk_read_procfs(void)
+static int __init init_clk_read_debugfs(void)
{
/* Expose a simple debugfs interface to view all clocks */
(void) debugfs_create_file("u300_clocks", S_IFREG | S_IRUGO,
- NULL, NULL, &u300_clocks_operations);
+ NULL, NULL,
+ &u300_clocks_operations);
+ return 0;
}
-#else
-static inline void init_clk_read_procfs(void)
-{
-}
+/*
+ * This needs to come in after the core_initcall() for the
+ * overall clocks, because debugfs is not available until
+ * the subsystems come up.
+ */
+module_init(init_clk_read_debugfs);
#endif
static int __init u300_clock_init(void)
@@ -1462,8 +1503,6 @@
clk_register();
- init_clk_read_procfs();
-
/*
* Some of these may be on when we boot the system so make sure they
* are turned OFF.
diff --git a/arch/arm/mm/proc-syms.c b/arch/arm/mm/proc-syms.c
index 195e48e..ac5c800 100644
--- a/arch/arm/mm/proc-syms.c
+++ b/arch/arm/mm/proc-syms.c
@@ -27,6 +27,7 @@
EXPORT_SYMBOL(__cpuc_flush_user_all);
EXPORT_SYMBOL(__cpuc_flush_user_range);
EXPORT_SYMBOL(__cpuc_coherent_kern_range);
+EXPORT_SYMBOL(__cpuc_flush_dcache_page);
EXPORT_SYMBOL(dmac_inv_range); /* because of flush_ioremap_region() */
#else
EXPORT_SYMBOL(cpu_cache);
diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c
index def14ec..7677a4a 100644
--- a/arch/arm/plat-omap/dma.c
+++ b/arch/arm/plat-omap/dma.c
@@ -2457,6 +2457,19 @@
setup_irq(irq, &omap24xx_dma_irq);
}
+ /* Enable smartidle idlemodes and autoidle */
+ if (cpu_is_omap34xx()) {
+ u32 v = dma_read(OCP_SYSCONFIG);
+ v &= ~(DMA_SYSCONFIG_MIDLEMODE_MASK |
+ DMA_SYSCONFIG_SIDLEMODE_MASK |
+ DMA_SYSCONFIG_AUTOIDLE);
+ v |= (DMA_SYSCONFIG_MIDLEMODE(DMA_IDLEMODE_SMARTIDLE) |
+ DMA_SYSCONFIG_SIDLEMODE(DMA_IDLEMODE_SMARTIDLE) |
+ DMA_SYSCONFIG_AUTOIDLE);
+ dma_write(v , OCP_SYSCONFIG);
+ }
+
+
/* FIXME: Update LCD DMA to work on 24xx */
if (cpu_class_is_omap1()) {
r = request_irq(INT_DMA_LCD, lcd_dma_irq_handler, 0,
diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c
index 7fd89ba..26b387c 100644
--- a/arch/arm/plat-omap/gpio.c
+++ b/arch/arm/plat-omap/gpio.c
@@ -1585,6 +1585,7 @@
__raw_writel(0x00000000, bank->base + OMAP24XX_GPIO_IRQENABLE1);
__raw_writel(0xffffffff, bank->base + OMAP24XX_GPIO_IRQSTATUS1);
__raw_writew(0x0015, bank->base + OMAP24XX_GPIO_SYSCONFIG);
+ __raw_writel(0x00000000, bank->base + OMAP24XX_GPIO_DEBOUNCE_EN);
/* Initialize interface clock ungated, module enabled */
__raw_writel(0, bank->base + OMAP24XX_GPIO_CTRL);
diff --git a/arch/arm/plat-omap/include/mach/cpu.h b/arch/arm/plat-omap/include/mach/cpu.h
index fc60c4e..285eaa3 100644
--- a/arch/arm/plat-omap/include/mach/cpu.h
+++ b/arch/arm/plat-omap/include/mach/cpu.h
@@ -30,6 +30,17 @@
#ifndef __ASM_ARCH_OMAP_CPU_H
#define __ASM_ARCH_OMAP_CPU_H
+/*
+ * Omap device type i.e. EMU/HS/TST/GP/BAD
+ */
+#define OMAP2_DEVICE_TYPE_TEST 0
+#define OMAP2_DEVICE_TYPE_EMU 1
+#define OMAP2_DEVICE_TYPE_SEC 2
+#define OMAP2_DEVICE_TYPE_GP 3
+#define OMAP2_DEVICE_TYPE_BAD 4
+
+int omap_type(void);
+
struct omap_chip_id {
u8 oc;
u8 type;
@@ -424,17 +435,6 @@
int omap_chip_is(struct omap_chip_id oci);
-int omap_type(void);
-
-/*
- * Macro to detect device type i.e. EMU/HS/TST/GP/BAD
- */
-#define OMAP2_DEVICE_TYPE_TEST 0
-#define OMAP2_DEVICE_TYPE_EMU 1
-#define OMAP2_DEVICE_TYPE_SEC 2
-#define OMAP2_DEVICE_TYPE_GP 3
-#define OMAP2_DEVICE_TYPE_BAD 4
-
void omap2_check_revision(void);
#endif /* defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) */
diff --git a/arch/arm/plat-omap/include/mach/dma.h b/arch/arm/plat-omap/include/mach/dma.h
index 8c1eae8..7b939cc 100644
--- a/arch/arm/plat-omap/include/mach/dma.h
+++ b/arch/arm/plat-omap/include/mach/dma.h
@@ -389,6 +389,21 @@
#define DMA_THREAD_FIFO_25 (0x02 << 14)
#define DMA_THREAD_FIFO_50 (0x03 << 14)
+/* DMA4_OCP_SYSCONFIG bits */
+#define DMA_SYSCONFIG_MIDLEMODE_MASK (3 << 12)
+#define DMA_SYSCONFIG_CLOCKACTIVITY_MASK (3 << 8)
+#define DMA_SYSCONFIG_EMUFREE (1 << 5)
+#define DMA_SYSCONFIG_SIDLEMODE_MASK (3 << 3)
+#define DMA_SYSCONFIG_SOFTRESET (1 << 2)
+#define DMA_SYSCONFIG_AUTOIDLE (1 << 0)
+
+#define DMA_SYSCONFIG_MIDLEMODE(n) ((n) << 12)
+#define DMA_SYSCONFIG_SIDLEMODE(n) ((n) << 3)
+
+#define DMA_IDLEMODE_SMARTIDLE 0x2
+#define DMA_IDLEMODE_NO_IDLE 0x1
+#define DMA_IDLEMODE_FORCE_IDLE 0x0
+
/* Chaining modes*/
#ifndef CONFIG_ARCH_OMAP1
#define OMAP_DMA_STATIC_CHAIN 0x1
diff --git a/arch/arm/plat-omap/include/mach/io.h b/arch/arm/plat-omap/include/mach/io.h
index 3b28147..73f483d 100644
--- a/arch/arm/plat-omap/include/mach/io.h
+++ b/arch/arm/plat-omap/include/mach/io.h
@@ -201,7 +201,7 @@
#define OMAP2_IO_ADDRESS(pa) IOMEM(__OMAP2_IO_ADDRESS(pa))
#ifdef __ASSEMBLER__
-#define IOMEM(x) x
+#define IOMEM(x) (x)
#else
#define IOMEM(x) ((void __force __iomem *)(x))
diff --git a/arch/arm/plat-omap/iommu.c b/arch/arm/plat-omap/iommu.c
index 4cf449f..4a03013 100644
--- a/arch/arm/plat-omap/iommu.c
+++ b/arch/arm/plat-omap/iommu.c
@@ -298,7 +298,7 @@
if ((start <= da) && (da < start + bytes)) {
dev_dbg(obj->dev, "%s: %08x<=%08x(%x)\n",
__func__, start, da, bytes);
-
+ iotlb_load_cr(obj, &cr);
iommu_write_reg(obj, 1, MMU_FLUSH_ENTRY);
}
}
diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c
index 65006df..4ea7380 100644
--- a/arch/arm/plat-omap/sram.c
+++ b/arch/arm/plat-omap/sram.c
@@ -133,7 +133,12 @@
if (cpu_is_omap34xx()) {
omap_sram_base = OMAP3_SRAM_PUB_VA;
omap_sram_start = OMAP3_SRAM_PUB_PA;
- omap_sram_size = 0x8000; /* 32K */
+ if ((omap_type() == OMAP2_DEVICE_TYPE_EMU) ||
+ (omap_type() == OMAP2_DEVICE_TYPE_SEC)) {
+ omap_sram_size = 0x7000; /* 28K */
+ } else {
+ omap_sram_size = 0x8000; /* 32K */
+ }
} else {
omap_sram_base = OMAP2_SRAM_PUB_VA;
omap_sram_start = OMAP2_SRAM_PUB_PA;
diff --git a/arch/arm/plat-s3c/Makefile b/arch/arm/plat-s3c/Makefile
index 74bb7cb..0761766 100644
--- a/arch/arm/plat-s3c/Makefile
+++ b/arch/arm/plat-s3c/Makefile
@@ -34,7 +34,7 @@
obj-$(CONFIG_S3C_DEV_HSMMC1) += dev-hsmmc1.o
obj-y += dev-i2c0.o
obj-$(CONFIG_S3C_DEV_I2C1) += dev-i2c1.o
-obj-$(CONFIG_SND_S3C24XX_SOC) += dev-audio.o
+obj-$(CONFIG_SND_S3C64XX_SOC_I2S) += dev-audio.o
obj-$(CONFIG_S3C_DEV_FB) += dev-fb.o
obj-$(CONFIG_S3C_DEV_USB_HOST) += dev-usb.o
obj-$(CONFIG_S3C_DEV_USB_HSOTG) += dev-usb-hsotg.o
diff --git a/arch/arm/plat-s3c/include/plat/devs.h b/arch/arm/plat-s3c/include/plat/devs.h
index b5b9c4d..2e17082 100644
--- a/arch/arm/plat-s3c/include/plat/devs.h
+++ b/arch/arm/plat-s3c/include/plat/devs.h
@@ -37,6 +37,7 @@
extern struct platform_device s3c_device_rtc;
extern struct platform_device s3c_device_adc;
extern struct platform_device s3c_device_sdi;
+extern struct platform_device s3c_device_iis;
extern struct platform_device s3c_device_hwmon;
extern struct platform_device s3c_device_hsmmc0;
extern struct platform_device s3c_device_hsmmc1;
diff --git a/arch/arm/plat-s3c24xx/Makefile b/arch/arm/plat-s3c24xx/Makefile
index 636cb127..579a165 100644
--- a/arch/arm/plat-s3c24xx/Makefile
+++ b/arch/arm/plat-s3c24xx/Makefile
@@ -29,7 +29,7 @@
obj-$(CONFIG_PM) += pm.o
obj-$(CONFIG_PM) += irq-pm.o
obj-$(CONFIG_PM) += sleep.o
-obj-$(CONFIG_HAVE_PWM) += pwm.o
+obj-$(CONFIG_S3C24XX_PWM) += pwm.o
obj-$(CONFIG_S3C2410_CLOCK) += s3c2410-clock.o
obj-$(CONFIG_S3C2410_DMA) += dma.o
obj-$(CONFIG_S3C24XX_ADC) += adc.o
diff --git a/arch/arm/plat-s3c24xx/spi-bus0-gpe11_12_13.c b/arch/arm/plat-s3c24xx/spi-bus0-gpe11_12_13.c
index 9edf789..da7a617 100644
--- a/arch/arm/plat-s3c24xx/spi-bus0-gpe11_12_13.c
+++ b/arch/arm/plat-s3c24xx/spi-bus0-gpe11_12_13.c
@@ -12,8 +12,7 @@
*/
#include <linux/kernel.h>
-
-#include <mach/hardware.h>
+#include <linux/gpio.h>
#include <mach/spi.h>
#include <mach/regs-gpio.h>
diff --git a/arch/arm/plat-s3c24xx/spi-bus1-gpg5_6_7.c b/arch/arm/plat-s3c24xx/spi-bus1-gpg5_6_7.c
index f34d0fc..86b9edc 100644
--- a/arch/arm/plat-s3c24xx/spi-bus1-gpg5_6_7.c
+++ b/arch/arm/plat-s3c24xx/spi-bus1-gpg5_6_7.c
@@ -12,8 +12,7 @@
*/
#include <linux/kernel.h>
-
-#include <mach/hardware.h>
+#include <linux/gpio.h>
#include <mach/spi.h>
#include <mach/regs-gpio.h>
diff --git a/arch/avr32/include/asm/thread_info.h b/arch/avr32/include/asm/thread_info.h
index 4442f8d..fc42de5 100644
--- a/arch/avr32/include/asm/thread_info.h
+++ b/arch/avr32/include/asm/thread_info.h
@@ -40,7 +40,7 @@
.exec_domain = &default_exec_domain, \
.flags = 0, \
.cpu = 0, \
- .preempt_count = 1, \
+ .preempt_count = INIT_PREEMPT_COUNT, \
.restart_block = { \
.fn = do_no_restart_syscall \
} \
diff --git a/arch/avr32/kernel/traps.c b/arch/avr32/kernel/traps.c
index 6e3d491..b91b204 100644
--- a/arch/avr32/kernel/traps.c
+++ b/arch/avr32/kernel/traps.c
@@ -32,22 +32,25 @@
spin_lock_irq(&die_lock);
bust_spinlocks(1);
- printk(KERN_ALERT "Oops: %s, sig: %ld [#%d]\n" KERN_EMERG,
+ printk(KERN_ALERT "Oops: %s, sig: %ld [#%d]\n",
str, err, ++die_counter);
+
+ printk(KERN_EMERG);
+
#ifdef CONFIG_PREEMPT
- printk("PREEMPT ");
+ printk(KERN_CONT "PREEMPT ");
#endif
#ifdef CONFIG_FRAME_POINTER
- printk("FRAME_POINTER ");
+ printk(KERN_CONT "FRAME_POINTER ");
#endif
if (current_cpu_data.features & AVR32_FEATURE_OCD) {
unsigned long did = ocd_read(DID);
- printk("chip: 0x%03lx:0x%04lx rev %lu\n",
+ printk(KERN_CONT "chip: 0x%03lx:0x%04lx rev %lu\n",
(did >> 1) & 0x7ff,
(did >> 12) & 0x7fff,
(did >> 28) & 0xf);
} else {
- printk("cpu: arch %u r%u / core %u r%u\n",
+ printk(KERN_CONT "cpu: arch %u r%u / core %u r%u\n",
current_cpu_data.arch_type,
current_cpu_data.arch_revision,
current_cpu_data.cpu_type,
diff --git a/arch/blackfin/include/asm/thread_info.h b/arch/blackfin/include/asm/thread_info.h
index 2920087..2bbfdd9 100644
--- a/arch/blackfin/include/asm/thread_info.h
+++ b/arch/blackfin/include/asm/thread_info.h
@@ -77,7 +77,7 @@
.exec_domain = &default_exec_domain, \
.flags = 0, \
.cpu = 0, \
- .preempt_count = 1, \
+ .preempt_count = INIT_PREEMPT_COUNT, \
.restart_block = { \
.fn = do_no_restart_syscall, \
}, \
diff --git a/arch/blackfin/kernel/ptrace.c b/arch/blackfin/kernel/ptrace.c
index d76618d..6a387ee 100644
--- a/arch/blackfin/kernel/ptrace.c
+++ b/arch/blackfin/kernel/ptrace.c
@@ -31,7 +31,6 @@
#include <linux/sched.h>
#include <linux/mm.h>
#include <linux/smp.h>
-#include <linux/smp_lock.h>
#include <linux/errno.h>
#include <linux/ptrace.h>
#include <linux/user.h>
diff --git a/arch/blackfin/kernel/setup.c b/arch/blackfin/kernel/setup.c
index 298f023..6136c33 100644
--- a/arch/blackfin/kernel/setup.c
+++ b/arch/blackfin/kernel/setup.c
@@ -408,13 +408,14 @@
bfin_memmap.map[i].addr + bfin_memmap.map[i].size);
switch (bfin_memmap.map[i].type) {
case BFIN_MEMMAP_RAM:
- printk("(usable)\n");
- break;
+ printk(KERN_CONT "(usable)\n");
+ break;
case BFIN_MEMMAP_RESERVED:
- printk("(reserved)\n");
- break;
- default: printk("type %lu\n", bfin_memmap.map[i].type);
- break;
+ printk(KERN_CONT "(reserved)\n");
+ break;
+ default:
+ printk(KERN_CONT "type %lu\n", bfin_memmap.map[i].type);
+ break;
}
}
}
@@ -614,19 +615,19 @@
printk(KERN_INFO "Kernel Managed Memory: %ldMB\n", _ramend >> 20);
printk(KERN_INFO "Memory map:\n"
- KERN_INFO " fixedcode = 0x%p-0x%p\n"
- KERN_INFO " text = 0x%p-0x%p\n"
- KERN_INFO " rodata = 0x%p-0x%p\n"
- KERN_INFO " bss = 0x%p-0x%p\n"
- KERN_INFO " data = 0x%p-0x%p\n"
- KERN_INFO " stack = 0x%p-0x%p\n"
- KERN_INFO " init = 0x%p-0x%p\n"
- KERN_INFO " available = 0x%p-0x%p\n"
+ " fixedcode = 0x%p-0x%p\n"
+ " text = 0x%p-0x%p\n"
+ " rodata = 0x%p-0x%p\n"
+ " bss = 0x%p-0x%p\n"
+ " data = 0x%p-0x%p\n"
+ " stack = 0x%p-0x%p\n"
+ " init = 0x%p-0x%p\n"
+ " available = 0x%p-0x%p\n"
#ifdef CONFIG_MTD_UCLINUX
- KERN_INFO " rootfs = 0x%p-0x%p\n"
+ " rootfs = 0x%p-0x%p\n"
#endif
#if DMA_UNCACHED_REGION > 0
- KERN_INFO " DMA Zone = 0x%p-0x%p\n"
+ " DMA Zone = 0x%p-0x%p\n"
#endif
, (void *)FIXED_CODE_START, (void *)FIXED_CODE_END,
_stext, _etext,
@@ -859,13 +860,13 @@
#endif
printk(KERN_INFO "Hardware Trace ");
if (bfin_read_TBUFCTL() & 0x1)
- printk("Active ");
+ printk(KERN_CONT "Active ");
else
- printk("Off ");
+ printk(KERN_CONT "Off ");
if (bfin_read_TBUFCTL() & 0x2)
- printk("and Enabled\n");
+ printk(KERN_CONT "and Enabled\n");
else
- printk("and Disabled\n");
+ printk(KERN_CONT "and Disabled\n");
#if defined(CONFIG_CHR_DEV_FLASH) || defined(CONFIG_BLK_DEV_FLASH)
/* we need to initialize the Flashrom device here since we might
diff --git a/arch/blackfin/kernel/sys_bfin.c b/arch/blackfin/kernel/sys_bfin.c
index a8f1329..3da60fb 100644
--- a/arch/blackfin/kernel/sys_bfin.c
+++ b/arch/blackfin/kernel/sys_bfin.c
@@ -29,7 +29,6 @@
* 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
-#include <linux/smp_lock.h>
#include <linux/spinlock.h>
#include <linux/sem.h>
#include <linux/msg.h>
diff --git a/arch/blackfin/kernel/traps.c b/arch/blackfin/kernel/traps.c
index 8eeb457..8a1caf2 100644
--- a/arch/blackfin/kernel/traps.c
+++ b/arch/blackfin/kernel/traps.c
@@ -212,7 +212,7 @@
console_verbose();
oops_in_progress = 1;
#ifdef CONFIG_DEBUG_VERBOSE
- printk(KERN_EMERG "\n" KERN_EMERG "Double Fault\n");
+ printk(KERN_EMERG "Double Fault\n");
#ifdef CONFIG_DEBUG_DOUBLEFAULT_PRINT
if (((long)fp->seqstat & SEQSTAT_EXCAUSE) == VEC_UNCOV) {
unsigned int cpu = smp_processor_id();
@@ -583,15 +583,14 @@
#ifndef CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE
if (trapnr == VEC_CPLB_I_M || trapnr == VEC_CPLB_M)
verbose_printk(KERN_NOTICE "No trace since you do not have "
- "CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE enabled\n"
- KERN_NOTICE "\n");
+ "CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE enabled\n\n");
else
#endif
dump_bfin_trace_buffer();
if (oops_in_progress) {
/* Dump the current kernel stack */
- verbose_printk(KERN_NOTICE "\n" KERN_NOTICE "Kernel Stack\n");
+ verbose_printk(KERN_NOTICE "Kernel Stack\n");
show_stack(current, NULL);
print_modules();
#ifndef CONFIG_ACCESS_CHECK
@@ -906,7 +905,7 @@
ret_addr = 0;
if (!j && i % 8 == 0)
- printk("\n" KERN_NOTICE "%p:",addr);
+ printk(KERN_NOTICE "%p:",addr);
/* if it is an odd address, or zero, just skip it */
if (*addr & 0x1 || !*addr)
@@ -996,9 +995,9 @@
printk(KERN_NOTICE "CPU = %d\n", current_thread_info()->cpu);
if (!((unsigned long)current->mm & 0x3) && (unsigned long)current->mm >= FIXED_CODE_START)
- verbose_printk(KERN_NOTICE "TEXT = 0x%p-0x%p DATA = 0x%p-0x%p\n"
- KERN_NOTICE " BSS = 0x%p-0x%p USER-STACK = 0x%p\n"
- KERN_NOTICE "\n",
+ verbose_printk(KERN_NOTICE
+ "TEXT = 0x%p-0x%p DATA = 0x%p-0x%p\n"
+ " BSS = 0x%p-0x%p USER-STACK = 0x%p\n\n",
(void *)current->mm->start_code,
(void *)current->mm->end_code,
(void *)current->mm->start_data,
@@ -1009,8 +1008,8 @@
else
verbose_printk(KERN_NOTICE "invalid mm\n");
} else
- verbose_printk(KERN_NOTICE "\n" KERN_NOTICE
- "No Valid process in current context\n");
+ verbose_printk(KERN_NOTICE
+ "No Valid process in current context\n");
#endif
}
@@ -1028,7 +1027,7 @@
addr < (unsigned short *)((unsigned long)erraddr & ~0xF) + 0x10;
addr++) {
if (!((unsigned long)addr & 0xF))
- verbose_printk("\n" KERN_NOTICE "0x%p: ", addr);
+ verbose_printk(KERN_NOTICE "0x%p: ", addr);
if (!get_instruction(&val, addr)) {
val = 0;
@@ -1056,9 +1055,9 @@
oops_in_progress)){
verbose_printk(KERN_NOTICE "Looks like this was a deferred error - sorry\n");
#ifndef CONFIG_DEBUG_HWERR
- verbose_printk(KERN_NOTICE "The remaining message may be meaningless\n"
- KERN_NOTICE "You should enable CONFIG_DEBUG_HWERR to get a"
- " better idea where it came from\n");
+ verbose_printk(KERN_NOTICE
+"The remaining message may be meaningless\n"
+"You should enable CONFIG_DEBUG_HWERR to get a better idea where it came from\n");
#else
/* If we are handling only one peripheral interrupt
* and current mm and pid are valid, and the last error
@@ -1114,9 +1113,10 @@
verbose_printk(KERN_NOTICE "%s", linux_banner);
- verbose_printk(KERN_NOTICE "\n" KERN_NOTICE "SEQUENCER STATUS:\t\t%s\n", print_tainted());
+ verbose_printk(KERN_NOTICE "\nSEQUENCER STATUS:\t\t%s\n",
+ print_tainted());
verbose_printk(KERN_NOTICE " SEQSTAT: %08lx IPEND: %04lx SYSCFG: %04lx\n",
- (long)fp->seqstat, fp->ipend, fp->syscfg);
+ (long)fp->seqstat, fp->ipend, fp->syscfg);
if ((fp->seqstat & SEQSTAT_EXCAUSE) == VEC_HWERR) {
verbose_printk(KERN_NOTICE " HWERRCAUSE: 0x%lx\n",
(fp->seqstat & SEQSTAT_HWERRCAUSE) >> 14);
@@ -1184,7 +1184,7 @@
verbose_printk(KERN_NOTICE "ICPLB_FAULT_ADDR: %s\n", buf);
}
- verbose_printk(KERN_NOTICE "\n" KERN_NOTICE "PROCESSOR STATE:\n");
+ verbose_printk(KERN_NOTICE "PROCESSOR STATE:\n");
verbose_printk(KERN_NOTICE " R0 : %08lx R1 : %08lx R2 : %08lx R3 : %08lx\n",
fp->r0, fp->r1, fp->r2, fp->r3);
verbose_printk(KERN_NOTICE " R4 : %08lx R5 : %08lx R6 : %08lx R7 : %08lx\n",
diff --git a/arch/cris/include/asm/thread_info.h b/arch/cris/include/asm/thread_info.h
index bc5b293..c3aade3 100644
--- a/arch/cris/include/asm/thread_info.h
+++ b/arch/cris/include/asm/thread_info.h
@@ -50,8 +50,6 @@
/*
* macros/functions for gaining access to the thread information structure
- *
- * preempt_count needs to be 1 initially, until the scheduler is functional.
*/
#ifndef __ASSEMBLY__
#define INIT_THREAD_INFO(tsk) \
@@ -60,7 +58,7 @@
.exec_domain = &default_exec_domain, \
.flags = 0, \
.cpu = 0, \
- .preempt_count = 1, \
+ .preempt_count = INIT_PREEMPT_COUNT, \
.addr_limit = KERNEL_DS, \
.restart_block = { \
.fn = do_no_restart_syscall, \
diff --git a/arch/cris/kernel/sys_cris.c b/arch/cris/kernel/sys_cris.c
index a79fbd8..2ad962c 100644
--- a/arch/cris/kernel/sys_cris.c
+++ b/arch/cris/kernel/sys_cris.c
@@ -15,7 +15,6 @@
#include <linux/mm.h>
#include <linux/fs.h>
#include <linux/smp.h>
-#include <linux/smp_lock.h>
#include <linux/sem.h>
#include <linux/msg.h>
#include <linux/shm.h>
diff --git a/arch/frv/Kconfig b/arch/frv/Kconfig
index 8a5bd7a..b86e19c 100644
--- a/arch/frv/Kconfig
+++ b/arch/frv/Kconfig
@@ -7,6 +7,7 @@
default y
select HAVE_IDE
select HAVE_ARCH_TRACEHOOK
+ select HAVE_PERF_COUNTERS
config ZONE_DMA
bool
diff --git a/arch/frv/include/asm/atomic.h b/arch/frv/include/asm/atomic.h
index 0409d98..00a57af 100644
--- a/arch/frv/include/asm/atomic.h
+++ b/arch/frv/include/asm/atomic.h
@@ -121,10 +121,72 @@
#define atomic_dec_and_test(v) (atomic_sub_return(1, (v)) == 0)
#define atomic_inc_and_test(v) (atomic_add_return(1, (v)) == 0)
+/*
+ * 64-bit atomic ops
+ */
+typedef struct {
+ volatile long long counter;
+} atomic64_t;
+
+#define ATOMIC64_INIT(i) { (i) }
+
+static inline long long atomic64_read(atomic64_t *v)
+{
+ long long counter;
+
+ asm("ldd%I1 %M1,%0"
+ : "=e"(counter)
+ : "m"(v->counter));
+ return counter;
+}
+
+static inline void atomic64_set(atomic64_t *v, long long i)
+{
+ asm volatile("std%I0 %1,%M0"
+ : "=m"(v->counter)
+ : "e"(i));
+}
+
+extern long long atomic64_inc_return(atomic64_t *v);
+extern long long atomic64_dec_return(atomic64_t *v);
+extern long long atomic64_add_return(long long i, atomic64_t *v);
+extern long long atomic64_sub_return(long long i, atomic64_t *v);
+
+static inline long long atomic64_add_negative(long long i, atomic64_t *v)
+{
+ return atomic64_add_return(i, v) < 0;
+}
+
+static inline void atomic64_add(long long i, atomic64_t *v)
+{
+ atomic64_add_return(i, v);
+}
+
+static inline void atomic64_sub(long long i, atomic64_t *v)
+{
+ atomic64_sub_return(i, v);
+}
+
+static inline void atomic64_inc(atomic64_t *v)
+{
+ atomic64_inc_return(v);
+}
+
+static inline void atomic64_dec(atomic64_t *v)
+{
+ atomic64_dec_return(v);
+}
+
+#define atomic64_sub_and_test(i,v) (atomic64_sub_return((i), (v)) == 0)
+#define atomic64_dec_and_test(v) (atomic64_dec_return((v)) == 0)
+#define atomic64_inc_and_test(v) (atomic64_inc_return((v)) == 0)
+
/*****************************************************************************/
/*
* exchange value with memory
*/
+extern uint64_t __xchg_64(uint64_t i, volatile void *v);
+
#ifndef CONFIG_FRV_OUTOFLINE_ATOMIC_OPS
#define xchg(ptr, x) \
@@ -174,8 +236,10 @@
#define tas(ptr) (xchg((ptr), 1))
-#define atomic_cmpxchg(v, old, new) (cmpxchg(&((v)->counter), old, new))
-#define atomic_xchg(v, new) (xchg(&((v)->counter), new))
+#define atomic_cmpxchg(v, old, new) (cmpxchg(&(v)->counter, old, new))
+#define atomic_xchg(v, new) (xchg(&(v)->counter, new))
+#define atomic64_cmpxchg(v, old, new) (__cmpxchg_64(old, new, &(v)->counter))
+#define atomic64_xchg(v, new) (__xchg_64(new, &(v)->counter))
static __inline__ int atomic_add_unless(atomic_t *v, int a, int u)
{
diff --git a/arch/frv/include/asm/perf_counter.h b/arch/frv/include/asm/perf_counter.h
new file mode 100644
index 0000000..ccf726e
--- /dev/null
+++ b/arch/frv/include/asm/perf_counter.h
@@ -0,0 +1,17 @@
+/* FRV performance counter support
+ *
+ * Copyright (C) 2009 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+#ifndef _ASM_PERF_COUNTER_H
+#define _ASM_PERF_COUNTER_H
+
+#define PERF_COUNTER_INDEX_OFFSET 0
+
+#endif /* _ASM_PERF_COUNTER_H */
diff --git a/arch/frv/include/asm/system.h b/arch/frv/include/asm/system.h
index 7742ec0..efd22d9 100644
--- a/arch/frv/include/asm/system.h
+++ b/arch/frv/include/asm/system.h
@@ -208,6 +208,8 @@
* - if (*ptr == test) then orig = *ptr; *ptr = test;
* - if (*ptr != test) then orig = *ptr;
*/
+extern uint64_t __cmpxchg_64(uint64_t test, uint64_t new, volatile uint64_t *v);
+
#ifndef CONFIG_FRV_OUTOFLINE_ATOMIC_OPS
#define cmpxchg(ptr, test, new) \
diff --git a/arch/frv/include/asm/thread_info.h b/arch/frv/include/asm/thread_info.h
index e8a5ed7..e608e05 100644
--- a/arch/frv/include/asm/thread_info.h
+++ b/arch/frv/include/asm/thread_info.h
@@ -56,8 +56,6 @@
/*
* macros/functions for gaining access to the thread information structure
- *
- * preempt_count needs to be 1 initially, until the scheduler is functional.
*/
#ifndef __ASSEMBLY__
@@ -67,7 +65,7 @@
.exec_domain = &default_exec_domain, \
.flags = 0, \
.cpu = 0, \
- .preempt_count = 1, \
+ .preempt_count = INIT_PREEMPT_COUNT, \
.addr_limit = KERNEL_DS, \
.restart_block = { \
.fn = do_no_restart_syscall, \
diff --git a/arch/frv/include/asm/unistd.h b/arch/frv/include/asm/unistd.h
index 96d78d5..4a8fb42 100644
--- a/arch/frv/include/asm/unistd.h
+++ b/arch/frv/include/asm/unistd.h
@@ -341,10 +341,12 @@
#define __NR_inotify_init1 332
#define __NR_preadv 333
#define __NR_pwritev 334
+#define __NR_rt_tgsigqueueinfo 335
+#define __NR_perf_counter_open 336
#ifdef __KERNEL__
-#define NR_syscalls 335
+#define NR_syscalls 337
#define __ARCH_WANT_IPC_PARSE_VERSION
/* #define __ARCH_WANT_OLD_READDIR */
diff --git a/arch/frv/kernel/entry.S b/arch/frv/kernel/entry.S
index 356e0e3..fde1e44 100644
--- a/arch/frv/kernel/entry.S
+++ b/arch/frv/kernel/entry.S
@@ -1524,5 +1524,7 @@
.long sys_inotify_init1
.long sys_preadv
.long sys_pwritev
+ .long sys_rt_tgsigqueueinfo /* 335 */
+ .long sys_perf_counter_open
syscall_table_size = (. - sys_call_table)
diff --git a/arch/frv/kernel/frv_ksyms.c b/arch/frv/kernel/frv_ksyms.c
index 0316b3c..a89803b 100644
--- a/arch/frv/kernel/frv_ksyms.c
+++ b/arch/frv/kernel/frv_ksyms.c
@@ -67,6 +67,10 @@
EXPORT_SYMBOL(__xchg_32);
EXPORT_SYMBOL(__cmpxchg_32);
#endif
+EXPORT_SYMBOL(atomic64_add_return);
+EXPORT_SYMBOL(atomic64_sub_return);
+EXPORT_SYMBOL(__xchg_64);
+EXPORT_SYMBOL(__cmpxchg_64);
EXPORT_SYMBOL(__debug_bug_printk);
EXPORT_SYMBOL(__delay_loops_MHz);
diff --git a/arch/frv/lib/Makefile b/arch/frv/lib/Makefile
index 08be305..0a37721 100644
--- a/arch/frv/lib/Makefile
+++ b/arch/frv/lib/Makefile
@@ -4,5 +4,5 @@
lib-y := \
__ashldi3.o __lshrdi3.o __muldi3.o __ashrdi3.o __negdi2.o __ucmpdi2.o \
- checksum.o memcpy.o memset.o atomic-ops.o \
- outsl_ns.o outsl_sw.o insl_ns.o insl_sw.o cache.o
+ checksum.o memcpy.o memset.o atomic-ops.o atomic64-ops.o \
+ outsl_ns.o outsl_sw.o insl_ns.o insl_sw.o cache.o perf_counter.o
diff --git a/arch/frv/lib/atomic-ops.S b/arch/frv/lib/atomic-ops.S
index ee0ac90..5e9e6ab 100644
--- a/arch/frv/lib/atomic-ops.S
+++ b/arch/frv/lib/atomic-ops.S
@@ -163,11 +163,10 @@
ld.p @(gr11,gr0),gr8
orcr cc7,cc7,cc3
subcc gr8,gr9,gr7,icc0
- bne icc0,#0,1f
+ bnelr icc0,#0
cst.p gr10,@(gr11,gr0) ,cc3,#1
corcc gr29,gr29,gr0 ,cc3,#1
beq icc3,#0,0b
-1:
bralr
.size __cmpxchg_32, .-__cmpxchg_32
diff --git a/arch/frv/lib/atomic64-ops.S b/arch/frv/lib/atomic64-ops.S
new file mode 100644
index 0000000..b6194ee
--- /dev/null
+++ b/arch/frv/lib/atomic64-ops.S
@@ -0,0 +1,162 @@
+/* kernel atomic64 operations
+ *
+ * For an explanation of how atomic ops work in this arch, see:
+ * Documentation/frv/atomic-ops.txt
+ *
+ * Copyright (C) 2009 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <asm/spr-regs.h>
+
+ .text
+ .balign 4
+
+
+###############################################################################
+#
+# long long atomic64_inc_return(atomic64_t *v)
+#
+###############################################################################
+ .globl atomic64_inc_return
+ .type atomic64_inc_return,@function
+atomic64_inc_return:
+ or.p gr8,gr8,gr10
+0:
+ orcc gr0,gr0,gr0,icc3 /* set ICC3.Z */
+ ckeq icc3,cc7
+ ldd.p @(gr10,gr0),gr8 /* LDD.P/ORCR must be atomic */
+ orcr cc7,cc7,cc3 /* set CC3 to true */
+ addicc gr9,#1,gr9,icc0
+ addxi gr8,#0,gr8,icc0
+ cstd.p gr8,@(gr10,gr0) ,cc3,#1
+ corcc gr29,gr29,gr0 ,cc3,#1 /* clear ICC3.Z if store happens */
+ beq icc3,#0,0b
+ bralr
+
+ .size atomic64_inc_return, .-atomic64_inc_return
+
+###############################################################################
+#
+# long long atomic64_dec_return(atomic64_t *v)
+#
+###############################################################################
+ .globl atomic64_dec_return
+ .type atomic64_dec_return,@function
+atomic64_dec_return:
+ or.p gr8,gr8,gr10
+0:
+ orcc gr0,gr0,gr0,icc3 /* set ICC3.Z */
+ ckeq icc3,cc7
+ ldd.p @(gr10,gr0),gr8 /* LDD.P/ORCR must be atomic */
+ orcr cc7,cc7,cc3 /* set CC3 to true */
+ subicc gr9,#1,gr9,icc0
+ subxi gr8,#0,gr8,icc0
+ cstd.p gr8,@(gr10,gr0) ,cc3,#1
+ corcc gr29,gr29,gr0 ,cc3,#1 /* clear ICC3.Z if store happens */
+ beq icc3,#0,0b
+ bralr
+
+ .size atomic64_dec_return, .-atomic64_dec_return
+
+###############################################################################
+#
+# long long atomic64_add_return(long long i, atomic64_t *v)
+#
+###############################################################################
+ .globl atomic64_add_return
+ .type atomic64_add_return,@function
+atomic64_add_return:
+ or.p gr8,gr8,gr4
+ or gr9,gr9,gr5
+0:
+ orcc gr0,gr0,gr0,icc3 /* set ICC3.Z */
+ ckeq icc3,cc7
+ ldd.p @(gr10,gr0),gr8 /* LDD.P/ORCR must be atomic */
+ orcr cc7,cc7,cc3 /* set CC3 to true */
+ addcc gr9,gr5,gr9,icc0
+ addx gr8,gr4,gr8,icc0
+ cstd.p gr8,@(gr10,gr0) ,cc3,#1
+ corcc gr29,gr29,gr0 ,cc3,#1 /* clear ICC3.Z if store happens */
+ beq icc3,#0,0b
+ bralr
+
+ .size atomic64_add_return, .-atomic64_add_return
+
+###############################################################################
+#
+# long long atomic64_sub_return(long long i, atomic64_t *v)
+#
+###############################################################################
+ .globl atomic64_sub_return
+ .type atomic64_sub_return,@function
+atomic64_sub_return:
+ or.p gr8,gr8,gr4
+ or gr9,gr9,gr5
+0:
+ orcc gr0,gr0,gr0,icc3 /* set ICC3.Z */
+ ckeq icc3,cc7
+ ldd.p @(gr10,gr0),gr8 /* LDD.P/ORCR must be atomic */
+ orcr cc7,cc7,cc3 /* set CC3 to true */
+ subcc gr9,gr5,gr9,icc0
+ subx gr8,gr4,gr8,icc0
+ cstd.p gr8,@(gr10,gr0) ,cc3,#1
+ corcc gr29,gr29,gr0 ,cc3,#1 /* clear ICC3.Z if store happens */
+ beq icc3,#0,0b
+ bralr
+
+ .size atomic64_sub_return, .-atomic64_sub_return
+
+###############################################################################
+#
+# uint64_t __xchg_64(uint64_t i, uint64_t *v)
+#
+###############################################################################
+ .globl __xchg_64
+ .type __xchg_64,@function
+__xchg_64:
+ or.p gr8,gr8,gr4
+ or gr9,gr9,gr5
+0:
+ orcc gr0,gr0,gr0,icc3 /* set ICC3.Z */
+ ckeq icc3,cc7
+ ldd.p @(gr10,gr0),gr8 /* LDD.P/ORCR must be atomic */
+ orcr cc7,cc7,cc3 /* set CC3 to true */
+ cstd.p gr4,@(gr10,gr0) ,cc3,#1
+ corcc gr29,gr29,gr0 ,cc3,#1 /* clear ICC3.Z if store happens */
+ beq icc3,#0,0b
+ bralr
+
+ .size __xchg_64, .-__xchg_64
+
+###############################################################################
+#
+# uint64_t __cmpxchg_64(uint64_t test, uint64_t new, uint64_t *v)
+#
+###############################################################################
+ .globl __cmpxchg_64
+ .type __cmpxchg_64,@function
+__cmpxchg_64:
+ or.p gr8,gr8,gr4
+ or gr9,gr9,gr5
+0:
+ orcc gr0,gr0,gr0,icc3 /* set ICC3.Z */
+ ckeq icc3,cc7
+ ldd.p @(gr12,gr0),gr8 /* LDD.P/ORCR must be atomic */
+ orcr cc7,cc7,cc3
+ subcc gr8,gr4,gr0,icc0
+ subcc.p gr9,gr5,gr0,icc1
+ bnelr icc0,#0
+ bnelr icc1,#0
+ cstd.p gr10,@(gr12,gr0) ,cc3,#1
+ corcc gr29,gr29,gr0 ,cc3,#1 /* clear ICC3.Z if store happens */
+ beq icc3,#0,0b
+ bralr
+
+ .size __cmpxchg_64, .-__cmpxchg_64
+
diff --git a/arch/frv/lib/perf_counter.c b/arch/frv/lib/perf_counter.c
new file mode 100644
index 0000000..2000fee
--- /dev/null
+++ b/arch/frv/lib/perf_counter.c
@@ -0,0 +1,19 @@
+/* Performance counter handling
+ *
+ * Copyright (C) 2009 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+#include <linux/perf_counter.h>
+
+/*
+ * mark the performance counter as pending
+ */
+void set_perf_counter_pending(void)
+{
+}
diff --git a/arch/h8300/include/asm/thread_info.h b/arch/h8300/include/asm/thread_info.h
index 700014d..8bbc8b0 100644
--- a/arch/h8300/include/asm/thread_info.h
+++ b/arch/h8300/include/asm/thread_info.h
@@ -36,7 +36,7 @@
.exec_domain = &default_exec_domain, \
.flags = 0, \
.cpu = 0, \
- .preempt_count = 1, \
+ .preempt_count = INIT_PREEMPT_COUNT, \
.restart_block = { \
.fn = do_no_restart_syscall, \
}, \
diff --git a/arch/ia64/include/asm/thread_info.h b/arch/ia64/include/asm/thread_info.h
index ae69226..8ce2e38 100644
--- a/arch/ia64/include/asm/thread_info.h
+++ b/arch/ia64/include/asm/thread_info.h
@@ -48,7 +48,7 @@
.flags = 0, \
.cpu = 0, \
.addr_limit = KERNEL_DS, \
- .preempt_count = 0, \
+ .preempt_count = INIT_PREEMPT_COUNT, \
.restart_block = { \
.fn = do_no_restart_syscall, \
}, \
diff --git a/arch/ia64/kernel/esi.c b/arch/ia64/kernel/esi.c
index ebf4e98..d5764a3 100644
--- a/arch/ia64/kernel/esi.c
+++ b/arch/ia64/kernel/esi.c
@@ -65,7 +65,7 @@
}
if (!esi)
- return -ENODEV;;
+ return -ENODEV;
systab = __va(esi);
diff --git a/arch/ia64/kernel/perfmon.c b/arch/ia64/kernel/perfmon.c
index abce246..f178270 100644
--- a/arch/ia64/kernel/perfmon.c
+++ b/arch/ia64/kernel/perfmon.c
@@ -5603,7 +5603,7 @@
* /proc/perfmon interface, for debug only
*/
-#define PFM_PROC_SHOW_HEADER ((void *)nr_cpu_ids+1)
+#define PFM_PROC_SHOW_HEADER ((void *)(long)nr_cpu_ids+1)
static void *
pfm_proc_start(struct seq_file *m, loff_t *pos)
diff --git a/arch/ia64/kernel/ptrace.c b/arch/ia64/kernel/ptrace.c
index 92c9689..9daa87f 100644
--- a/arch/ia64/kernel/ptrace.c
+++ b/arch/ia64/kernel/ptrace.c
@@ -15,7 +15,6 @@
#include <linux/mm.h>
#include <linux/errno.h>
#include <linux/ptrace.h>
-#include <linux/smp_lock.h>
#include <linux/user.h>
#include <linux/security.h>
#include <linux/audit.h>
diff --git a/arch/ia64/kernel/salinfo.c b/arch/ia64/kernel/salinfo.c
index 7053c55..e6676fc 100644
--- a/arch/ia64/kernel/salinfo.c
+++ b/arch/ia64/kernel/salinfo.c
@@ -192,7 +192,7 @@
static void
salinfo_work_to_do(struct salinfo_data *data)
{
- down_trylock(&data->mutex);
+ (void)(down_trylock(&data->mutex) ?: 0);
up(&data->mutex);
}
diff --git a/arch/ia64/kvm/kvm_lib.c b/arch/ia64/kvm/kvm_lib.c
index a85cb61..f1268b8 100644
--- a/arch/ia64/kvm/kvm_lib.c
+++ b/arch/ia64/kvm/kvm_lib.c
@@ -11,5 +11,11 @@
*
*/
#undef CONFIG_MODULES
+#include <linux/module.h>
+#undef CONFIG_KALLSYMS
+#undef EXPORT_SYMBOL
+#undef EXPORT_SYMBOL_GPL
+#define EXPORT_SYMBOL(sym)
+#define EXPORT_SYMBOL_GPL(sym)
#include "../../../lib/vsprintf.c"
#include "../../../lib/ctype.c"
diff --git a/arch/ia64/kvm/process.c b/arch/ia64/kvm/process.c
index a8f84da..bb862fb 100644
--- a/arch/ia64/kvm/process.c
+++ b/arch/ia64/kvm/process.c
@@ -130,7 +130,7 @@
if (vdcr & IA64_DCR_PP) {
vpsr |= IA64_PSR_PP;
} else {
- vpsr &= ~IA64_PSR_PP;;
+ vpsr &= ~IA64_PSR_PP;
}
vcpu_set_psr(vcpu, vpsr);
@@ -594,11 +594,11 @@
p->u.pal_data.gr30 = vcpu_get_gr(vcpu, 30);
break;
case PAL_BRAND_INFO:
- p->u.pal_data.gr29 = gr29;;
+ p->u.pal_data.gr29 = gr29;
p->u.pal_data.gr30 = kvm_trans_pal_call_args(vcpu, gr30);
break;
default:
- p->u.pal_data.gr29 = gr29;;
+ p->u.pal_data.gr29 = gr29;
p->u.pal_data.gr30 = vcpu_get_gr(vcpu, 30);
}
p->u.pal_data.gr28 = gr28;
diff --git a/arch/ia64/kvm/vcpu.c b/arch/ia64/kvm/vcpu.c
index a2c6c15..46b02cb 100644
--- a/arch/ia64/kvm/vcpu.c
+++ b/arch/ia64/kvm/vcpu.c
@@ -406,7 +406,7 @@
* Now look at registers in [0-31] range and init correct UNAT
*/
addr = (unsigned long)regs;
- unat = ®s->eml_unat;;
+ unat = ®s->eml_unat;
addr += gr_info[regnum];
diff --git a/arch/ia64/kvm/vtlb.c b/arch/ia64/kvm/vtlb.c
index 4290a42..20b3852 100644
--- a/arch/ia64/kvm/vtlb.c
+++ b/arch/ia64/kvm/vtlb.c
@@ -135,7 +135,7 @@
u64 rid;
rid = vcpu_get_rr(vcpu, va);
- rid = rid & RR_RID_MASK;;
+ rid = rid & RR_RID_MASK;
if (type == D_TLB) {
if (vcpu_quick_region_check(vcpu->arch.dtr_regions, va)) {
for (trp = (struct thash_data *)&vcpu->arch.dtrs, i = 0;
@@ -518,7 +518,7 @@
struct thash_cb *hcb = &v->arch.vtlb;
- cch = __vtr_lookup(v, va, is_data);;
+ cch = __vtr_lookup(v, va, is_data);
if (cch)
return cch;
diff --git a/arch/ia64/pci/pci.c b/arch/ia64/pci/pci.c
index 729298f..7de76dd 100644
--- a/arch/ia64/pci/pci.c
+++ b/arch/ia64/pci/pci.c
@@ -537,7 +537,7 @@
/*
* PCI BIOS setup, always defaults to SAL interface
*/
-char * __devinit
+char * __init
pcibios_setup (char *str)
{
return str;
diff --git a/arch/ia64/sn/kernel/io_common.c b/arch/ia64/sn/kernel/io_common.c
index 76645cf..25831c4 100644
--- a/arch/ia64/sn/kernel/io_common.c
+++ b/arch/ia64/sn/kernel/io_common.c
@@ -435,7 +435,8 @@
bricktype = MODULE_GET_BTYPE(moduleid);
if ((bricktype == L1_BRICKTYPE_191010) ||
(bricktype == L1_BRICKTYPE_1932))
- sprintf(address, "%s^%d", address, geo_slot(geoid));
+ sprintf(address + strlen(address), "^%d",
+ geo_slot(geoid));
}
void __devinit
diff --git a/arch/m32r/include/asm/thread_info.h b/arch/m32r/include/asm/thread_info.h
index 8589d46..07bb5bd 100644
--- a/arch/m32r/include/asm/thread_info.h
+++ b/arch/m32r/include/asm/thread_info.h
@@ -57,8 +57,6 @@
/*
* macros/functions for gaining access to the thread information structure
- *
- * preempt_count needs to be 1 initially, until the scheduler is functional.
*/
#ifndef __ASSEMBLY__
@@ -68,7 +66,7 @@
.exec_domain = &default_exec_domain, \
.flags = 0, \
.cpu = 0, \
- .preempt_count = 1, \
+ .preempt_count = INIT_PREEMPT_COUNT, \
.addr_limit = KERNEL_DS, \
.restart_block = { \
.fn = do_no_restart_syscall, \
diff --git a/arch/m32r/kernel/ptrace.c b/arch/m32r/kernel/ptrace.c
index bf0abe9..98b8feb 100644
--- a/arch/m32r/kernel/ptrace.c
+++ b/arch/m32r/kernel/ptrace.c
@@ -19,7 +19,6 @@
#include <linux/mm.h>
#include <linux/err.h>
#include <linux/smp.h>
-#include <linux/smp_lock.h>
#include <linux/errno.h>
#include <linux/ptrace.h>
#include <linux/user.h>
diff --git a/arch/m68k/include/asm/thread_info_mm.h b/arch/m68k/include/asm/thread_info_mm.h
index af0fda4..6ea5c33 100644
--- a/arch/m68k/include/asm/thread_info_mm.h
+++ b/arch/m68k/include/asm/thread_info_mm.h
@@ -19,6 +19,7 @@
{ \
.task = &tsk, \
.exec_domain = &default_exec_domain, \
+ .preempt_count = INIT_PREEMPT_COUNT, \
.restart_block = { \
.fn = do_no_restart_syscall, \
}, \
diff --git a/arch/m68k/include/asm/thread_info_no.h b/arch/m68k/include/asm/thread_info_no.h
index 82529f4..c2bde5e 100644
--- a/arch/m68k/include/asm/thread_info_no.h
+++ b/arch/m68k/include/asm/thread_info_no.h
@@ -49,6 +49,7 @@
.exec_domain = &default_exec_domain, \
.flags = 0, \
.cpu = 0, \
+ .preempt_count = INIT_PREEMPT_COUNT, \
.restart_block = { \
.fn = do_no_restart_syscall, \
}, \
diff --git a/arch/m68knommu/kernel/process.c b/arch/m68knommu/kernel/process.c
index 1e96c6e..8f8f4ab 100644
--- a/arch/m68knommu/kernel/process.c
+++ b/arch/m68knommu/kernel/process.c
@@ -290,7 +290,7 @@
unsigned char *tp;
int i;
- printk(KERN_EMERG "\n" KERN_EMERG "CURRENT PROCESS:\n" KERN_EMERG "\n");
+ printk(KERN_EMERG "\nCURRENT PROCESS:\n\n");
printk(KERN_EMERG "COMM=%s PID=%d\n", current->comm, current->pid);
if (current->mm) {
@@ -301,8 +301,7 @@
(int) current->mm->end_data,
(int) current->mm->end_data,
(int) current->mm->brk);
- printk(KERN_EMERG "USER-STACK=%08x KERNEL-STACK=%08x\n"
- KERN_EMERG "\n",
+ printk(KERN_EMERG "USER-STACK=%08x KERNEL-STACK=%08x\n\n",
(int) current->mm->start_stack,
(int)(((unsigned long) current) + THREAD_SIZE));
}
@@ -313,35 +312,35 @@
fp->d0, fp->d1, fp->d2, fp->d3);
printk(KERN_EMERG "d4: %08lx d5: %08lx a0: %08lx a1: %08lx\n",
fp->d4, fp->d5, fp->a0, fp->a1);
- printk(KERN_EMERG "\n" KERN_EMERG "USP: %08x TRAPFRAME: %08x\n",
+ printk(KERN_EMERG "\nUSP: %08x TRAPFRAME: %08x\n",
(unsigned int) rdusp(), (unsigned int) fp);
- printk(KERN_EMERG "\n" KERN_EMERG "CODE:");
+ printk(KERN_EMERG "\nCODE:");
tp = ((unsigned char *) fp->pc) - 0x20;
for (sp = (unsigned long *) tp, i = 0; (i < 0x40); i += 4) {
if ((i % 0x10) == 0)
- printk("\n" KERN_EMERG "%08x: ", (int) (tp + i));
+ printk(KERN_EMERG "%08x: ", (int) (tp + i));
printk("%08x ", (int) *sp++);
}
- printk("\n" KERN_EMERG "\n");
+ printk(KERN_EMERG "\n");
printk(KERN_EMERG "KERNEL STACK:");
tp = ((unsigned char *) fp) - 0x40;
for (sp = (unsigned long *) tp, i = 0; (i < 0xc0); i += 4) {
if ((i % 0x10) == 0)
- printk("\n" KERN_EMERG "%08x: ", (int) (tp + i));
+ printk(KERN_EMERG "%08x: ", (int) (tp + i));
printk("%08x ", (int) *sp++);
}
- printk("\n" KERN_EMERG "\n");
+ printk(KERN_EMERG "\n");
printk(KERN_EMERG "USER STACK:");
tp = (unsigned char *) (rdusp() - 0x10);
for (sp = (unsigned long *) tp, i = 0; (i < 0x80); i += 4) {
if ((i % 0x10) == 0)
- printk("\n" KERN_EMERG "%08x: ", (int) (tp + i));
+ printk(KERN_EMERG "%08x: ", (int) (tp + i));
printk("%08x ", (int) *sp++);
}
- printk("\n" KERN_EMERG "\n");
+ printk(KERN_EMERG "\n");
}
/*
diff --git a/arch/m68knommu/kernel/traps.c b/arch/m68knommu/kernel/traps.c
index 51d3253..3739c8f 100644
--- a/arch/m68knommu/kernel/traps.c
+++ b/arch/m68knommu/kernel/traps.c
@@ -111,7 +111,7 @@
if (i % 5)
printk(KERN_CONT " [%08lx] ", addr);
else
- printk(KERN_CONT "\n" KERN_EMERG " [%08lx] ", addr);
+ printk(KERN_EMERG " [%08lx] ", addr);
i++;
#endif
}
@@ -137,8 +137,8 @@
if (stack + 1 + i > endstack)
break;
if (i % 8 == 0)
- printk("\n" KERN_EMERG " ");
- printk(" %08lx", *(stack + i));
+ printk(KERN_EMERG " ");
+ printk(KERN_CONT " %08lx", *(stack + i));
}
printk("\n");
i = 0;
diff --git a/arch/microblaze/Kconfig b/arch/microblaze/Kconfig
index b50b845..2db722d 100644
--- a/arch/microblaze/Kconfig
+++ b/arch/microblaze/Kconfig
@@ -53,6 +53,9 @@
config GENERIC_GPIO
def_bool y
+config GENERIC_CSUM
+ def_bool y
+
config PCI
def_bool n
diff --git a/arch/microblaze/include/asm/atomic.h b/arch/microblaze/include/asm/atomic.h
index 0de612a..6d2e1d4 100644
--- a/arch/microblaze/include/asm/atomic.h
+++ b/arch/microblaze/include/asm/atomic.h
@@ -1,95 +1,7 @@
-/*
- * Copyright (C) 2006 Atmark Techno, Inc.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
#ifndef _ASM_MICROBLAZE_ATOMIC_H
#define _ASM_MICROBLAZE_ATOMIC_H
-#include <linux/types.h>
-#include <linux/compiler.h> /* likely */
-#include <asm/system.h> /* local_irq_XXX and friends */
-
-#define ATOMIC_INIT(i) { (i) }
-#define atomic_read(v) ((v)->counter)
-#define atomic_set(v, i) (((v)->counter) = (i))
-
-#define atomic_inc(v) (atomic_add_return(1, (v)))
-#define atomic_dec(v) (atomic_sub_return(1, (v)))
-
-#define atomic_add(i, v) (atomic_add_return(i, (v)))
-#define atomic_sub(i, v) (atomic_sub_return(i, (v)))
-
-#define atomic_inc_return(v) (atomic_add_return(1, (v)))
-#define atomic_dec_return(v) (atomic_sub_return(1, (v)))
-
-#define atomic_inc_and_test(v) (atomic_add_return(1, (v)) == 0)
-#define atomic_dec_and_test(v) (atomic_sub_return(1, (v)) == 0)
-
-#define atomic_inc_not_zero(v) (atomic_add_unless((v), 1, 0))
-
-#define atomic_sub_and_test(i, v) (atomic_sub_return((i), (v)) == 0)
-
-static inline int atomic_cmpxchg(atomic_t *v, int old, int new)
-{
- int ret;
- unsigned long flags;
-
- local_irq_save(flags);
- ret = v->counter;
- if (likely(ret == old))
- v->counter = new;
- local_irq_restore(flags);
-
- return ret;
-}
-
-static inline int atomic_add_unless(atomic_t *v, int a, int u)
-{
- int c, old;
-
- c = atomic_read(v);
- while (c != u && (old = atomic_cmpxchg((v), c, c + a)) != c)
- c = old;
- return c != u;
-}
-
-static inline void atomic_clear_mask(unsigned long mask, unsigned long *addr)
-{
- unsigned long flags;
-
- local_irq_save(flags);
- *addr &= ~mask;
- local_irq_restore(flags);
-}
-
-/**
- * atomic_add_return - add and return
- * @i: integer value to add
- * @v: pointer of type atomic_t
- *
- * Atomically adds @i to @v and returns @i + @v
- */
-static inline int atomic_add_return(int i, atomic_t *v)
-{
- unsigned long flags;
- int val;
-
- local_irq_save(flags);
- val = v->counter;
- v->counter = val += i;
- local_irq_restore(flags);
-
- return val;
-}
-
-static inline int atomic_sub_return(int i, atomic_t *v)
-{
- return atomic_add_return(-i, v);
-}
+#include <asm-generic/atomic.h>
/*
* Atomically test *v and decrement if it is greater than 0.
@@ -109,15 +21,4 @@
return res;
}
-#define atomic_add_negative(a, v) (atomic_add_return((a), (v)) < 0)
-#define atomic_xchg(v, new) (xchg(&((v)->counter), new))
-
-/* Atomic operations are already serializing */
-#define smp_mb__before_atomic_dec() barrier()
-#define smp_mb__after_atomic_dec() barrier()
-#define smp_mb__before_atomic_inc() barrier()
-#define smp_mb__after_atomic_inc() barrier()
-
-#include <asm-generic/atomic-long.h>
-
#endif /* _ASM_MICROBLAZE_ATOMIC_H */
diff --git a/arch/microblaze/include/asm/bitops.h b/arch/microblaze/include/asm/bitops.h
index d6df1fd..a72468f 100644
--- a/arch/microblaze/include/asm/bitops.h
+++ b/arch/microblaze/include/asm/bitops.h
@@ -1,27 +1 @@
-/*
- * Copyright (C) 2006 Atmark Techno, Inc.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
-#ifndef _ASM_MICROBLAZE_BITOPS_H
-#define _ASM_MICROBLAZE_BITOPS_H
-
-/*
- * Copyright 1992, Linus Torvalds.
- */
-
-#include <asm/byteorder.h> /* swab32 */
-#include <asm/system.h> /* save_flags */
-
-/*
- * clear_bit() doesn't provide any barrier for the compiler.
- */
-#define smp_mb__before_clear_bit() barrier()
-#define smp_mb__after_clear_bit() barrier()
#include <asm-generic/bitops.h>
-#include <asm-generic/bitops/__fls.h>
-
-#endif /* _ASM_MICROBLAZE_BITOPS_H */
diff --git a/arch/microblaze/include/asm/bug.h b/arch/microblaze/include/asm/bug.h
index 8eb2cdd..b12fd89 100644
--- a/arch/microblaze/include/asm/bug.h
+++ b/arch/microblaze/include/asm/bug.h
@@ -1,15 +1 @@
-/*
- * Copyright (C) 2006 Atmark Techno, Inc.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
-#ifndef _ASM_MICROBLAZE_BUG_H
-#define _ASM_MICROBLAZE_BUG_H
-
-#include <linux/kernel.h>
#include <asm-generic/bug.h>
-
-#endif /* _ASM_MICROBLAZE_BUG_H */
diff --git a/arch/microblaze/include/asm/bugs.h b/arch/microblaze/include/asm/bugs.h
index f2c6593..61791e1 100644
--- a/arch/microblaze/include/asm/bugs.h
+++ b/arch/microblaze/include/asm/bugs.h
@@ -1,17 +1 @@
-/*
- * Copyright (C) 2006 Atmark Techno, Inc.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
-#ifndef _ASM_MICROBLAZE_BUGS_H
-#define _ASM_MICROBLAZE_BUGS_H
-
-static inline void check_bugs(void)
-{
- /* nothing to do */
-}
-
-#endif /* _ASM_MICROBLAZE_BUGS_H */
+#include <asm-generic/bugs.h>
diff --git a/arch/microblaze/include/asm/checksum.h b/arch/microblaze/include/asm/checksum.h
index 97ea46b..128bf03 100644
--- a/arch/microblaze/include/asm/checksum.h
+++ b/arch/microblaze/include/asm/checksum.h
@@ -10,12 +10,11 @@
#ifndef _ASM_MICROBLAZE_CHECKSUM_H
#define _ASM_MICROBLAZE_CHECKSUM_H
-#include <linux/in6.h>
-
/*
* computes the checksum of the TCP/UDP pseudo-header
* returns a 16-bit checksum, already complemented
*/
+#define csum_tcpudp_nofold csum_tcpudp_nofold
static inline __wsum
csum_tcpudp_nofold(__be32 saddr, __be32 daddr, unsigned short len,
unsigned short proto, __wsum sum)
@@ -30,71 +29,6 @@
return sum;
}
-/*
- * computes the checksum of a memory block at buff, length len,
- * and adds in "sum" (32-bit)
- *
- * returns a 32-bit number suitable for feeding into itself
- * or csum_tcpudp_magic
- *
- * this function must be called with even lengths, except
- * for the last fragment, which may be odd
- *
- * it's best to have buff aligned on a 32-bit boundary
- */
-extern __wsum csum_partial(const void *buff, int len, __wsum sum);
-
-/*
- * the same as csum_partial, but copies from src while it
- * checksums
- *
- * here even more important to align src and dst on a 32-bit (or even
- * better 64-bit) boundary
- */
-extern __wsum csum_partial_copy(const void *src, void *dst, int len,
- __wsum sum);
-
-/*
- * the same as csum_partial_copy, but copies from user space.
- *
- * here even more important to align src and dst on a 32-bit (or even
- * better 64-bit) boundary
- */
-extern __wsum csum_partial_copy_from_user(const void __user *src, void *dst,
- int len, __wsum sum, int *csum_err);
-
-#define csum_partial_copy_nocheck(src, dst, len, sum) \
- csum_partial_copy((src), (dst), (len), (sum))
-
-/*
- * This is a version of ip_compute_csum() optimized for IP headers,
- * which always checksum on 4 octet boundaries.
- *
- */
-extern __sum16 ip_fast_csum(const void *iph, unsigned int ihl);
-
-/*
- * Fold a partial checksum
- */
-static inline __sum16 csum_fold(__wsum csum)
-{
- u32 sum = (__force u32)csum;
- sum = (sum & 0xffff) + (sum >> 16);
- sum = (sum & 0xffff) + (sum >> 16);
- return (__force __sum16)~sum;
-}
-
-static inline __sum16
-csum_tcpudp_magic(__be32 saddr, __be32 daddr, unsigned short len,
- unsigned short proto, __wsum sum)
-{
- return csum_fold(csum_tcpudp_nofold(saddr, daddr, len, proto, sum));
-}
-
-/*
- * this routine is used for miscellaneous IP-like checksums, mainly
- * in icmp.c
- */
-extern __sum16 ip_compute_csum(const void *buff, int len);
+#include <asm-generic/checksum.h>
#endif /* _ASM_MICROBLAZE_CHECKSUM_H */
diff --git a/arch/microblaze/include/asm/fb.h b/arch/microblaze/include/asm/fb.h
new file mode 100644
index 0000000..3a4988e
--- /dev/null
+++ b/arch/microblaze/include/asm/fb.h
@@ -0,0 +1 @@
+#include <asm-generic/fb.h>
diff --git a/arch/microblaze/include/asm/hardirq.h b/arch/microblaze/include/asm/hardirq.h
index 0f2d6b0..41e1e1a 100644
--- a/arch/microblaze/include/asm/hardirq.h
+++ b/arch/microblaze/include/asm/hardirq.h
@@ -9,21 +9,11 @@
#ifndef _ASM_MICROBLAZE_HARDIRQ_H
#define _ASM_MICROBLAZE_HARDIRQ_H
-#include <linux/cache.h>
-#include <linux/irq.h>
-#include <asm/irq.h>
-#include <asm/current.h>
-#include <linux/ptrace.h>
-
/* should be defined in each interrupt controller driver */
extern unsigned int get_irq(struct pt_regs *regs);
-typedef struct {
- unsigned int __softirq_pending;
-} ____cacheline_aligned irq_cpustat_t;
-
+#define ack_bad_irq ack_bad_irq
void ack_bad_irq(unsigned int irq);
-
-#include <linux/irq_cpustat.h> /* Standard mappings for irq_cpustat_t above */
+#include <asm-generic/hardirq.h>
#endif /* _ASM_MICROBLAZE_HARDIRQ_H */
diff --git a/arch/microblaze/include/asm/ioctls.h b/arch/microblaze/include/asm/ioctls.h
index 03582b2..ec34c76 100644
--- a/arch/microblaze/include/asm/ioctls.h
+++ b/arch/microblaze/include/asm/ioctls.h
@@ -1,91 +1 @@
-/*
- * Copyright (C) 2006 Atmark Techno, Inc.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
-#ifndef _ASM_MICROBLAZE_IOCTLS_H
-#define _ASM_MICROBLAZE_IOCTLS_H
-
-#include <linux/ioctl.h>
-
-/* 0x54 is just a magic number to make these relatively unique ('T') */
-
-#define TCGETS 0x5401
-#define TCSETS 0x5402
-#define TCSETSW 0x5403
-#define TCSETSF 0x5404
-#define TCGETA 0x5405
-#define TCSETA 0x5406
-#define TCSETAW 0x5407
-#define TCSETAF 0x5408
-#define TCSBRK 0x5409
-#define TCXONC 0x540A
-#define TCFLSH 0x540B
-#define TIOCEXCL 0x540C
-#define TIOCNXCL 0x540D
-#define TIOCSCTTY 0x540E
-#define TIOCGPGRP 0x540F
-#define TIOCSPGRP 0x5410
-#define TIOCOUTQ 0x5411
-#define TIOCSTI 0x5412
-#define TIOCGWINSZ 0x5413
-#define TIOCSWINSZ 0x5414
-#define TIOCMGET 0x5415
-#define TIOCMBIS 0x5416
-#define TIOCMBIC 0x5417
-#define TIOCMSET 0x5418
-#define TIOCGSOFTCAR 0x5419
-#define TIOCSSOFTCAR 0x541A
-#define FIONREAD 0x541B
-#define TIOCINQ FIONREAD
-#define TIOCLINUX 0x541C
-#define TIOCCONS 0x541D
-#define TIOCGSERIAL 0x541E
-#define TIOCSSERIAL 0x541F
-#define TIOCPKT 0x5420
-#define FIONBIO 0x5421
-#define TIOCNOTTY 0x5422
-#define TIOCSETD 0x5423
-#define TIOCGETD 0x5424
-#define TCSBRKP 0x5425 /* Needed for POSIX tcsendbreak() */
-#define TIOCTTYGSTRUCT 0x5426 /* For debugging only */
-#define TIOCSBRK 0x5427 /* BSD compatibility */
-#define TIOCCBRK 0x5428 /* BSD compatibility */
-#define TIOCGSID 0x5429 /* Return the session ID of FD */
-/* Get Pty Number (of pty-mux device) */
-#define TIOCGPTN _IOR('T', 0x30, unsigned int)
-#define TIOCSPTLCK _IOW('T', 0x31, int) /* Lock/unlock Pty */
-
-#define FIONCLEX 0x5450 /* these numbers need to be adjusted. */
-#define FIOCLEX 0x5451
-#define FIOASYNC 0x5452
-#define TIOCSERCONFIG 0x5453
-#define TIOCSERGWILD 0x5454
-#define TIOCSERSWILD 0x5455
-#define TIOCGLCKTRMIOS 0x5456
-#define TIOCSLCKTRMIOS 0x5457
-#define TIOCSERGSTRUCT 0x5458 /* For debugging only */
-#define TIOCSERGETLSR 0x5459 /* Get line status register */
-#define TIOCSERGETMULTI 0x545A /* Get multiport config */
-#define TIOCSERSETMULTI 0x545B /* Set multiport config */
-
-#define TIOCMIWAIT 0x545C /* wait for a change on serial input line(s) */
-#define TIOCGICOUNT 0x545D /* read serial port inline interrupt counts */
-
-#define FIOQSIZE 0x545E
-
-/* Used for packet mode */
-#define TIOCPKT_DATA 0
-#define TIOCPKT_FLUSHREAD 1
-#define TIOCPKT_FLUSHWRITE 2
-#define TIOCPKT_STOP 4
-#define TIOCPKT_START 8
-#define TIOCPKT_NOSTOP 16
-#define TIOCPKT_DOSTOP 32
-
-#define TIOCSER_TEMT 0x01 /* Transmitter physically empty */
-
-#endif /* _ASM_MICROBLAZE_IOCTLS_H */
+#include <asm-generic/ioctls.h>
diff --git a/arch/microblaze/include/asm/ipcbuf.h b/arch/microblaze/include/asm/ipcbuf.h
index b056fa4..84c7e51 100644
--- a/arch/microblaze/include/asm/ipcbuf.h
+++ b/arch/microblaze/include/asm/ipcbuf.h
@@ -1,36 +1 @@
-/*
- * Copyright (C) 2006 Atmark Techno, Inc.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
-#ifndef _ASM_MICROBLAZE_IPCBUF_H
-#define _ASM_MICROBLAZE_IPCBUF_H
-
-/*
- * The user_ipc_perm structure for microblaze architecture.
- * Note extra padding because this structure is passed back and forth
- * between kernel and user space.
- *
- * Pad space is left for:
- * - 32-bit mode_t and seq
- * - 2 miscellaneous 32-bit values
- */
-
-struct ipc64_perm {
- __kernel_key_t key;
- __kernel_uid32_t uid;
- __kernel_gid32_t gid;
- __kernel_uid32_t cuid;
- __kernel_gid32_t cgid;
- __kernel_mode_t mode;
- unsigned short __pad1;
- unsigned short seq;
- unsigned short __pad2;
- unsigned long __unused1;
- unsigned long __unused2;
-};
-
-#endif /* _ASM_MICROBLAZE_IPCBUF_H */
+#include <asm-generic/ipcbuf.h>
diff --git a/arch/microblaze/include/asm/irq.h b/arch/microblaze/include/asm/irq.h
index db515de..90f0505 100644
--- a/arch/microblaze/include/asm/irq.h
+++ b/arch/microblaze/include/asm/irq.h
@@ -10,6 +10,7 @@
#define _ASM_MICROBLAZE_IRQ_H
#define NR_IRQS 32
+#include <asm-generic/irq.h>
#include <linux/interrupt.h>
@@ -17,11 +18,6 @@
#define NO_IRQ (-1)
-static inline int irq_canonicalize(int irq)
-{
- return irq;
-}
-
struct pt_regs;
extern void do_IRQ(struct pt_regs *regs);
diff --git a/arch/microblaze/include/asm/mman.h b/arch/microblaze/include/asm/mman.h
index 4914b13..8eebf89f5 100644
--- a/arch/microblaze/include/asm/mman.h
+++ b/arch/microblaze/include/asm/mman.h
@@ -1,25 +1 @@
-/*
- * Copyright (C) 2006 Atmark Techno, Inc.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
-#ifndef _ASM_MICROBLAZE_MMAN_H
-#define _ASM_MICROBLAZE_MMAN_H
-
#include <asm-generic/mman.h>
-
-#define MAP_GROWSDOWN 0x0100 /* stack-like segment */
-#define MAP_DENYWRITE 0x0800 /* ETXTBSY */
-#define MAP_EXECUTABLE 0x1000 /* mark it as an executable */
-#define MAP_LOCKED 0x2000 /* pages are locked */
-#define MAP_NORESERVE 0x4000 /* don't check for reservations */
-#define MAP_POPULATE 0x8000 /* populate (prefault) pagetables */
-#define MAP_NONBLOCK 0x10000 /* do not block on IO */
-
-#define MCL_CURRENT 1 /* lock all current mappings */
-#define MCL_FUTURE 2 /* lock all future mappings */
-
-#endif /* _ASM_MICROBLAZE_MMAN_H */
diff --git a/arch/microblaze/include/asm/mmu.h b/arch/microblaze/include/asm/mmu.h
index 66cad6a..8d6a654 100644
--- a/arch/microblaze/include/asm/mmu.h
+++ b/arch/microblaze/include/asm/mmu.h
@@ -12,12 +12,7 @@
#define _ASM_MICROBLAZE_MMU_H
# ifndef CONFIG_MMU
-# ifndef __ASSEMBLY__
-typedef struct {
- struct vm_list_struct *vmlist;
- unsigned long end_brk;
-} mm_context_t;
-# endif /* __ASSEMBLY__ */
+# include <asm-generic/mmu.h>
# else /* CONFIG_MMU */
# ifdef __KERNEL__
# ifndef __ASSEMBLY__
diff --git a/arch/microblaze/include/asm/mmu_context.h b/arch/microblaze/include/asm/mmu_context.h
index 385fed1..24eab16 100644
--- a/arch/microblaze/include/asm/mmu_context.h
+++ b/arch/microblaze/include/asm/mmu_context.h
@@ -1,5 +1,5 @@
#ifdef CONFIG_MMU
# include "mmu_context_mm.h"
#else
-# include "mmu_context_no.h"
+# include <asm-generic/mmu_context.h>
#endif
diff --git a/arch/microblaze/include/asm/mmu_context_no.h b/arch/microblaze/include/asm/mmu_context_no.h
deleted file mode 100644
index ba55671..0000000
--- a/arch/microblaze/include/asm/mmu_context_no.h
+++ /dev/null
@@ -1,23 +0,0 @@
-/*
- * Copyright (C) 2008-2009 Michal Simek <monstr@monstr.eu>
- * Copyright (C) 2008-2009 PetaLogix
- * Copyright (C) 2006 Atmark Techno, Inc.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
-#ifndef _ASM_MICROBLAZE_MMU_CONTEXT_H
-#define _ASM_MICROBLAZE_MMU_CONTEXT_H
-
-# define init_new_context(tsk, mm) ({ 0; })
-
-# define enter_lazy_tlb(mm, tsk) do {} while (0)
-# define change_mm_context(old, ctx, _pml4) do {} while (0)
-# define destroy_context(mm) do {} while (0)
-# define deactivate_mm(tsk, mm) do {} while (0)
-# define switch_mm(prev, next, tsk) do {} while (0)
-# define activate_mm(prev, next) do {} while (0)
-
-#endif /* _ASM_MICROBLAZE_MMU_CONTEXT_H */
diff --git a/arch/microblaze/include/asm/module.h b/arch/microblaze/include/asm/module.h
index 914565a..7be1347 100644
--- a/arch/microblaze/include/asm/module.h
+++ b/arch/microblaze/include/asm/module.h
@@ -9,6 +9,8 @@
#ifndef _ASM_MICROBLAZE_MODULE_H
#define _ASM_MICROBLAZE_MODULE_H
+#include <asm-generic/module.h>
+
/* Microblaze Relocations */
#define R_MICROBLAZE_NONE 0
#define R_MICROBLAZE_32 1
@@ -24,14 +26,6 @@
/* Keep this the last entry. */
#define R_MICROBLAZE_NUM 11
-struct mod_arch_specific {
- int foo;
-};
-
-#define Elf_Shdr Elf32_Shdr
-#define Elf_Sym Elf32_Sym
-#define Elf_Ehdr Elf32_Ehdr
-
typedef struct { volatile int counter; } module_t;
#endif /* _ASM_MICROBLAZE_MODULE_H */
diff --git a/arch/microblaze/include/asm/msgbuf.h b/arch/microblaze/include/asm/msgbuf.h
index 09dd970..809134c 100644
--- a/arch/microblaze/include/asm/msgbuf.h
+++ b/arch/microblaze/include/asm/msgbuf.h
@@ -1,31 +1 @@
-#ifndef _ASM_MICROBLAZE_MSGBUF_H
-#define _ASM_MICROBLAZE_MSGBUF_H
-
-/*
- * The msqid64_ds structure for microblaze architecture.
- * Note extra padding because this structure is passed back and forth
- * between kernel and user space.
- *
- * Pad space is left for:
- * - 64-bit time_t to solve y2038 problem
- * - 2 miscellaneous 32-bit values
- */
-
-struct msqid64_ds {
- struct ipc64_perm msg_perm;
- __kernel_time_t msg_stime; /* last msgsnd time */
- unsigned long __unused1;
- __kernel_time_t msg_rtime; /* last msgrcv time */
- unsigned long __unused2;
- __kernel_time_t msg_ctime; /* last change time */
- unsigned long __unused3;
- unsigned long msg_cbytes; /* current number of bytes on queue */
- unsigned long msg_qnum; /* number of messages in queue */
- unsigned long msg_qbytes; /* max number of bytes on queue */
- __kernel_pid_t msg_lspid; /* pid of last msgsnd */
- __kernel_pid_t msg_lrpid; /* last receive pid */
- unsigned long __unused4;
- unsigned long __unused5;
-};
-
-#endif /* _ASM_MICROBLAZE_MSGBUF_H */
+#include <asm-generic/msgbuf.h>
diff --git a/arch/microblaze/include/asm/param.h b/arch/microblaze/include/asm/param.h
index 8c538a4..965d454 100644
--- a/arch/microblaze/include/asm/param.h
+++ b/arch/microblaze/include/asm/param.h
@@ -1,30 +1 @@
-/*
- * Copyright (C) 2006 Atmark Techno, Inc.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
-#ifndef _ASM_MICROBLAZE_PARAM_H
-#define _ASM_MICROBLAZE_PARAM_H
-
-#ifdef __KERNEL__
-#define HZ CONFIG_HZ /* internal kernel timer frequency */
-#define USER_HZ 100 /* for user interfaces in "ticks" */
-#define CLOCKS_PER_SEC (USER_HZ) /* frequency at which times() counts */
-#endif /* __KERNEL__ */
-
-#ifndef HZ
-#define HZ 100
-#endif
-
-#define EXEC_PAGESIZE 4096
-
-#ifndef NOGROUP
-#define NOGROUP (-1)
-#endif
-
-#define MAXHOSTNAMELEN 64 /* max length of hostname */
-
-#endif /* _ASM_MICROBLAZE_PARAM_H */
+#include <asm-generic/param.h>
diff --git a/arch/microblaze/include/asm/parport.h b/arch/microblaze/include/asm/parport.h
new file mode 100644
index 0000000..cf252af
--- /dev/null
+++ b/arch/microblaze/include/asm/parport.h
@@ -0,0 +1 @@
+#include <asm-generic/parport.h>
diff --git a/arch/microblaze/include/asm/pci.h b/arch/microblaze/include/asm/pci.h
index ca03794..9f0df5f 100644
--- a/arch/microblaze/include/asm/pci.h
+++ b/arch/microblaze/include/asm/pci.h
@@ -1 +1 @@
-#include <linux/io.h>
+#include <asm-generic/pci.h>
diff --git a/arch/microblaze/include/asm/posix_types.h b/arch/microblaze/include/asm/posix_types.h
index 8c758b23..0e15039 100644
--- a/arch/microblaze/include/asm/posix_types.h
+++ b/arch/microblaze/include/asm/posix_types.h
@@ -1,73 +1,9 @@
-/*
- * Copyright (C) 2006 Atmark Techno, Inc.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
#ifndef _ASM_MICROBLAZE_POSIX_TYPES_H
#define _ASM_MICROBLAZE_POSIX_TYPES_H
-/*
- * This file is generally used by user-level software, so you need to
- * be a little careful about namespace pollution etc. Also, we cannot
- * assume GCC is being used.
- */
-
-typedef unsigned long __kernel_ino_t;
typedef unsigned short __kernel_mode_t;
-typedef unsigned int __kernel_nlink_t;
-typedef long __kernel_off_t;
-typedef int __kernel_pid_t;
-typedef unsigned int __kernel_ipc_pid_t;
-typedef unsigned int __kernel_uid_t;
-typedef unsigned int __kernel_gid_t;
-typedef unsigned long __kernel_size_t;
-typedef long __kernel_ssize_t;
-typedef int __kernel_ptrdiff_t;
-typedef long __kernel_time_t;
-typedef long __kernel_suseconds_t;
-typedef long __kernel_clock_t;
-typedef int __kernel_timer_t;
-typedef int __kernel_clockid_t;
-typedef int __kernel_daddr_t;
-typedef char *__kernel_caddr_t;
-typedef unsigned short __kernel_uid16_t;
-typedef unsigned short __kernel_gid16_t;
-typedef unsigned int __kernel_uid32_t;
-typedef unsigned int __kernel_gid32_t;
+#define __kernel_mode_t __kernel_mode_t
-typedef unsigned int __kernel_old_uid_t;
-typedef unsigned int __kernel_old_gid_t;
-typedef unsigned int __kernel_old_dev_t;
-
-#ifdef __GNUC__
-typedef long long __kernel_loff_t;
-#endif
-
-typedef struct {
-#if defined(__KERNEL__) || defined(__USE_ALL)
- int val[2];
-#else /* !defined(__KERNEL__) && !defined(__USE_ALL) */
- int __val[2];
-#endif /* !defined(__KERNEL__) && !defined(__USE_ALL) */
-} __kernel_fsid_t;
-
-#if defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2)
-
-#undef __FD_SET
-#define __FD_SET(d, set) ((set)->fds_bits[__FDELT(d)] |= __FDMASK(d))
-
-#undef __FD_CLR
-#define __FD_CLR(d, set) ((set)->fds_bits[__FDELT(d)] &= ~__FDMASK(d))
-
-#undef __FD_ISSET
-#define __FD_ISSET(d, set) (!!((set)->fds_bits[__FDELT(d)] & __FDMASK(d)))
-
-#undef __FD_ZERO
-#define __FD_ZERO(fdsetp) (memset(fdsetp, 0, sizeof(*(fd_set *)fdsetp)))
-
-#endif /* defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2) */
+#include <asm-generic/posix_types.h>
#endif /* _ASM_MICROBLAZE_POSIX_TYPES_H */
diff --git a/arch/microblaze/include/asm/scatterlist.h b/arch/microblaze/include/asm/scatterlist.h
index 08ff1d0..35d786f 100644
--- a/arch/microblaze/include/asm/scatterlist.h
+++ b/arch/microblaze/include/asm/scatterlist.h
@@ -1,28 +1 @@
-/*
- * Copyright (C) 2008 Michal Simek <monstr@monstr.eu>
- * Copyright (C) 2006 Atmark Techno, Inc.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
-#ifndef _ASM_MICROBLAZE_SCATTERLIST_H
-#define _ASM_MICROBLAZE_SCATTERLIST_H
-
-struct scatterlist {
-#ifdef CONFIG_DEBUG_SG
- unsigned long sg_magic;
-#endif
- unsigned long page_link;
- dma_addr_t dma_address;
- unsigned int offset;
- unsigned int length;
-};
-
-#define sg_dma_address(sg) ((sg)->dma_address)
-#define sg_dma_len(sg) ((sg)->length)
-
-#define ISA_DMA_THRESHOLD (~0UL)
-
-#endif /* _ASM_MICROBLAZE_SCATTERLIST_H */
+#include <asm-generic/scatterlist.h>
diff --git a/arch/microblaze/include/asm/sembuf.h b/arch/microblaze/include/asm/sembuf.h
index b804ed7..7673b83 100644
--- a/arch/microblaze/include/asm/sembuf.h
+++ b/arch/microblaze/include/asm/sembuf.h
@@ -1,34 +1 @@
-/*
- * Copyright (C) 2006 Atmark Techno, Inc.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
-#ifndef _ASM_MICROBLAZE_SEMBUF_H
-#define _ASM_MICROBLAZE_SEMBUF_H
-
-/*
- * The semid64_ds structure for microblaze architecture.
- * Note extra padding because this structure is passed back and forth
- * between kernel and user space.
- *
- * Pad space is left for:
- * - 64-bit time_t to solve y2038 problem
- * - 2 miscellaneous 32-bit values
- */
-
-struct semid64_ds {
- struct ipc64_perm sem_perm; /* permissions .. see ipc.h */
- __kernel_time_t sem_otime; /* last semop time */
- unsigned long __unused1;
- __kernel_time_t sem_ctime; /* last change time */
- unsigned long __unused2;
- unsigned long sem_nsems; /* no. of semaphores in array */
- unsigned long __unused3;
- unsigned long __unused4;
-};
-
-
-#endif /* _ASM_MICROBLAZE_SEMBUF_H */
+#include <asm-generic/sembuf.h>
diff --git a/arch/microblaze/include/asm/serial.h b/arch/microblaze/include/asm/serial.h
index 39bfc8c..a0cb0caf 100644
--- a/arch/microblaze/include/asm/serial.h
+++ b/arch/microblaze/include/asm/serial.h
@@ -1,14 +1 @@
-/*
- * Copyright (C) 2009 Michal Simek <monstr@monstr.eu>
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
-#ifndef _ASM_MICROBLAZE_SERIAL_H
-#define _ASM_MICROBLAZE_SERIAL_H
-
-# define BASE_BAUD (1843200 / 16)
-
-#endif /* _ASM_MICROBLAZE_SERIAL_H */
+#include <asm-generic/serial.h>
diff --git a/arch/microblaze/include/asm/shmbuf.h b/arch/microblaze/include/asm/shmbuf.h
index f829c58..83c05fc 100644
--- a/arch/microblaze/include/asm/shmbuf.h
+++ b/arch/microblaze/include/asm/shmbuf.h
@@ -1,42 +1 @@
-#ifndef _ASM_MICROBLAZE_SHMBUF_H
-#define _ASM_MICROBLAZE_SHMBUF_H
-
-/*
- * The shmid64_ds structure for microblaze architecture.
- * Note extra padding because this structure is passed back and forth
- * between kernel and user space.
- *
- * Pad space is left for:
- * - 64-bit time_t to solve y2038 problem
- * - 2 miscellaneous 32-bit values
- */
-
-struct shmid64_ds {
- struct ipc64_perm shm_perm; /* operation perms */
- size_t shm_segsz; /* size of segment (bytes) */
- __kernel_time_t shm_atime; /* last attach time */
- unsigned long __unused1;
- __kernel_time_t shm_dtime; /* last detach time */
- unsigned long __unused2;
- __kernel_time_t shm_ctime; /* last change time */
- unsigned long __unused3;
- __kernel_pid_t shm_cpid; /* pid of creator */
- __kernel_pid_t shm_lpid; /* pid of last operator */
- unsigned long shm_nattch; /* no. of current attaches */
- unsigned long __unused4;
- unsigned long __unused5;
-};
-
-struct shminfo64 {
- unsigned long shmmax;
- unsigned long shmmin;
- unsigned long shmmni;
- unsigned long shmseg;
- unsigned long shmall;
- unsigned long __unused1;
- unsigned long __unused2;
- unsigned long __unused3;
- unsigned long __unused4;
-};
-
-#endif /* _ASM_MICROBLAZE_SHMBUF_H */
+#include <asm-generic/shmbuf.h>
diff --git a/arch/microblaze/include/asm/shmparam.h b/arch/microblaze/include/asm/shmparam.h
index 9f5fc2b..93f30de 100644
--- a/arch/microblaze/include/asm/shmparam.h
+++ b/arch/microblaze/include/asm/shmparam.h
@@ -1,6 +1 @@
-#ifndef _ASM_MICROBLAZE_SHMPARAM_H
-#define _ASM_MICROBLAZE_SHMPARAM_H
-
-#define SHMLBA PAGE_SIZE /* attach addr a multiple of this */
-
-#endif /* _ASM_MICROBLAZE_SHMPARAM_H */
+#include <asm-generic/shmparam.h>
diff --git a/arch/microblaze/include/asm/siginfo.h b/arch/microblaze/include/asm/siginfo.h
index f162911..0815d29 100644
--- a/arch/microblaze/include/asm/siginfo.h
+++ b/arch/microblaze/include/asm/siginfo.h
@@ -1,15 +1 @@
-/*
- * Copyright (C) 2006 Atmark Techno, Inc.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
-#ifndef _ASM_MICROBLAZE_SIGINFO_H
-#define _ASM_MICROBLAZE_SIGINFO_H
-
-#include <linux/types.h>
#include <asm-generic/siginfo.h>
-
-#endif /* _ASM_MICROBLAZE_SIGINFO_H */
diff --git a/arch/microblaze/include/asm/signal.h b/arch/microblaze/include/asm/signal.h
index 46bc226..7b1573c 100644
--- a/arch/microblaze/include/asm/signal.h
+++ b/arch/microblaze/include/asm/signal.h
@@ -1,165 +1 @@
-/*
- * Copyright (C) 2006 Atmark Techno, Inc.
- * Yasushi SHOJI <yashi@atmark-techno.com>
- * Tetsuya OHKAWA <tetsuya@atmark-techno.com>
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
-#ifndef _ASM_MICROBLAZE_SIGNAL_H
-#define _ASM_MICROBLAZE_SIGNAL_H
-
-#define SIGHUP 1
-#define SIGINT 2
-#define SIGQUIT 3
-#define SIGILL 4
-#define SIGTRAP 5
-#define SIGABRT 6
-#define SIGIOT 6
-#define SIGBUS 7
-#define SIGFPE 8
-#define SIGKILL 9
-#define SIGUSR1 10
-#define SIGSEGV 11
-#define SIGUSR2 12
-#define SIGPIPE 13
-#define SIGALRM 14
-#define SIGTERM 15
-#define SIGSTKFLT 16
-#define SIGCHLD 17
-#define SIGCONT 18
-#define SIGSTOP 19
-#define SIGTSTP 20
-#define SIGTTIN 21
-#define SIGTTOU 22
-#define SIGURG 23
-#define SIGXCPU 24
-#define SIGXFSZ 25
-#define SIGVTALRM 26
-#define SIGPROF 27
-#define SIGWINCH 28
-#define SIGIO 29
-#define SIGPOLL SIGIO
-/*
-#define SIGLOST 29
-*/
-#define SIGPWR 30
-#define SIGSYS 31
-#define SIGUNUSED 31
-
-/* These should not be considered constants from userland. */
-#define SIGRTMIN 32
-#define SIGRTMAX _NSIG
-
-/*
- * SA_FLAGS values:
- *
- * SA_ONSTACK indicates that a registered stack_t will be used.
- * SA_RESTART flag to get restarting signals (which were the default long ago)
- * SA_NOCLDSTOP flag to turn off SIGCHLD when children stop.
- * SA_RESETHAND clears the handler when the signal is delivered.
- * SA_NOCLDWAIT flag on SIGCHLD to inhibit zombies.
- * SA_NODEFER prevents the current signal from being masked in the handler.
- *
- * SA_ONESHOT and SA_NOMASK are the historical Linux names for the Single
- * Unix names RESETHAND and NODEFER respectively.
- */
-#define SA_NOCLDSTOP 0x00000001
-#define SA_NOCLDWAIT 0x00000002
-#define SA_SIGINFO 0x00000004
-#define SA_ONSTACK 0x08000000
-#define SA_RESTART 0x10000000
-#define SA_NODEFER 0x40000000
-#define SA_RESETHAND 0x80000000
-
-#define SA_NOMASK SA_NODEFER
-#define SA_ONESHOT SA_RESETHAND
-
-#define SA_RESTORER 0x04000000
-
-/*
- * sigaltstack controls
- */
-#define SS_ONSTACK 1
-#define SS_DISABLE 2
-
-#define MINSIGSTKSZ 2048
-#define SIGSTKSZ 8192
-
-# ifndef __ASSEMBLY__
-# include <linux/types.h>
-# include <asm-generic/signal-defs.h>
-
-/* Avoid too many header ordering problems. */
-struct siginfo;
-
-# ifdef __KERNEL__
-/*
- * Most things should be clean enough to redefine this at will, if care
- * is taken to make libc match.
- */
-# define _NSIG 64
-# define _NSIG_BPW 32
-# define _NSIG_WORDS (_NSIG / _NSIG_BPW)
-
-typedef unsigned long old_sigset_t; /* at least 32 bits */
-
-typedef struct {
- unsigned long sig[_NSIG_WORDS];
-} sigset_t;
-
-struct old_sigaction {
- __sighandler_t sa_handler;
- old_sigset_t sa_mask;
- unsigned long sa_flags;
- void (*sa_restorer)(void);
-};
-
-struct sigaction {
- __sighandler_t sa_handler;
- unsigned long sa_flags;
- void (*sa_restorer)(void);
- sigset_t sa_mask; /* mask last for extensibility */
-};
-
-struct k_sigaction {
- struct sigaction sa;
-};
-
-# include <asm/sigcontext.h>
-# undef __HAVE_ARCH_SIG_BITOPS
-
-# define ptrace_signal_deliver(regs, cookie) do { } while (0)
-
-# else /* !__KERNEL__ */
-
-/* Here we must cater to libcs that poke about in kernel headers. */
-
-# define NSIG 32
-typedef unsigned long sigset_t;
-
-struct sigaction {
- union {
- __sighandler_t _sa_handler;
- void (*_sa_sigaction)(int, struct siginfo *, void *);
- } _u;
- sigset_t sa_mask;
- unsigned long sa_flags;
- void (*sa_restorer)(void);
-};
-
-# define sa_handler _u._sa_handler
-# define sa_sigaction _u._sa_sigaction
-
-# endif /* __KERNEL__ */
-
-typedef struct sigaltstack {
- void *ss_sp;
- int ss_flags;
- size_t ss_size;
-} stack_t;
-
-# endif /* __ASSEMBLY__ */
-#endif /* _ASM_MICROBLAZE_SIGNAL_H */
+#include <asm-generic/signal.h>
diff --git a/arch/microblaze/include/asm/socket.h b/arch/microblaze/include/asm/socket.h
index 8259368..6b71384 100644
--- a/arch/microblaze/include/asm/socket.h
+++ b/arch/microblaze/include/asm/socket.h
@@ -1,69 +1 @@
-/*
- * Copyright (C) 2006 Atmark Techno, Inc.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
-#ifndef _ASM_MICROBLAZE_SOCKET_H
-#define _ASM_MICROBLAZE_SOCKET_H
-
-#include <asm/sockios.h>
-
-/* For setsockoptions(2) */
-#define SOL_SOCKET 1
-
-#define SO_DEBUG 1
-#define SO_REUSEADDR 2
-#define SO_TYPE 3
-#define SO_ERROR 4
-#define SO_DONTROUTE 5
-#define SO_BROADCAST 6
-#define SO_SNDBUF 7
-#define SO_RCVBUF 8
-#define SO_SNDBUFFORCE 32
-#define SO_RCVBUFFORCE 33
-#define SO_KEEPALIVE 9
-#define SO_OOBINLINE 10
-#define SO_NO_CHECK 11
-#define SO_PRIORITY 12
-#define SO_LINGER 13
-#define SO_BSDCOMPAT 14
-/* To add :#define SO_REUSEPORT 15 */
-#define SO_PASSCRED 16
-#define SO_PEERCRED 17
-#define SO_RCVLOWAT 18
-#define SO_SNDLOWAT 19
-#define SO_RCVTIMEO 20
-#define SO_SNDTIMEO 21
-
-/* Security levels - as per NRL IPv6 - don't actually do anything */
-#define SO_SECURITY_AUTHENTICATION 22
-#define SO_SECURITY_ENCRYPTION_TRANSPORT 23
-#define SO_SECURITY_ENCRYPTION_NETWORK 24
-
-#define SO_BINDTODEVICE 25
-
-/* Socket filtering */
-#define SO_ATTACH_FILTER 26
-#define SO_DETACH_FILTER 27
-
-#define SO_PEERNAME 28
-#define SO_TIMESTAMP 29
-#define SCM_TIMESTAMP SO_TIMESTAMP
-
-#define SO_ACCEPTCONN 30
-
-#define SO_PEERSEC 31
-#define SO_PASSSEC 34
-
-#define SO_TIMESTAMPNS 35
-#define SCM_TIMESTAMPNS SO_TIMESTAMPNS
-
-#define SO_MARK 36
-
-#define SO_TIMESTAMPING 37
-#define SCM_TIMESTAMPING SO_TIMESTAMPING
-
-#endif /* _ASM_MICROBLAZE_SOCKET_H */
+#include <asm-generic/socket.h>
diff --git a/arch/microblaze/include/asm/sockios.h b/arch/microblaze/include/asm/sockios.h
index 9fff57a..def6d47 100644
--- a/arch/microblaze/include/asm/sockios.h
+++ b/arch/microblaze/include/asm/sockios.h
@@ -1,23 +1 @@
-/*
- * Copyright (C) 2006 Atmark Techno, Inc.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
-#ifndef _ASM_MICROBLAZE_SOCKIOS_H
-#define _ASM_MICROBLAZE_SOCKIOS_H
-
-#include <linux/ioctl.h>
-
-/* Socket-level I/O control calls. */
-#define FIOSETOWN 0x8901
-#define SIOCSPGRP 0x8902
-#define FIOGETOWN 0x8903
-#define SIOCGPGRP 0x8904
-#define SIOCATMARK 0x8905
-#define SIOCGSTAMP 0x8906 /* Get stamp (timeval) */
-#define SIOCGSTAMPNS 0x8907 /* Get stamp (timespec) */
-
-#endif /* _ASM_MICROBLAZE_SOCKIOS_H */
+#include <asm-generic/sockios.h>
diff --git a/arch/microblaze/include/asm/stat.h b/arch/microblaze/include/asm/stat.h
index a15f775..3dc90fa 100644
--- a/arch/microblaze/include/asm/stat.h
+++ b/arch/microblaze/include/asm/stat.h
@@ -1,68 +1 @@
-/*
- * Microblaze stat structure
- *
- * Copyright (C) 2001,02,03 NEC Electronics Corporation
- * Copyright (C) 2001,02,03 Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License. See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#ifndef _ASM_MICROBLAZE_STAT_H
-#define _ASM_MICROBLAZE_STAT_H
-
-#include <linux/posix_types.h>
-
-#define STAT_HAVE_NSEC 1
-
-struct stat {
- unsigned long st_dev;
- unsigned long st_ino;
- unsigned int st_mode;
- unsigned int st_nlink;
- unsigned int st_uid;
- unsigned int st_gid;
- unsigned long st_rdev;
- unsigned long __pad1;
- long st_size;
- int st_blksize;
- int __pad2;
- long st_blocks;
- int st_atime;
- unsigned int st_atime_nsec;
- int st_mtime;
- unsigned int st_mtime_nsec;
- int st_ctime;
- unsigned int st_ctime_nsec;
- unsigned long __unused4;
- unsigned long __unused5;
-};
-
-struct stat64 {
- unsigned long long st_dev; /* Device. */
- unsigned long long st_ino; /* File serial number. */
- unsigned int st_mode; /* File mode. */
- unsigned int st_nlink; /* Link count. */
- unsigned int st_uid; /* User ID of the file's owner. */
- unsigned int st_gid; /* Group ID of the file's group. */
- unsigned long long st_rdev; /* Device number, if device. */
- unsigned long long __pad1;
- long long st_size; /* Size of file, in bytes. */
- int st_blksize; /* Optimal block size for I/O. */
- int __pad2;
- long long st_blocks; /* Number 512-byte blocks allocated. */
- int st_atime; /* Time of last access. */
- unsigned int st_atime_nsec;
- int st_mtime; /* Time of last modification. */
- unsigned int st_mtime_nsec;
- int st_ctime; /* Time of last status change. */
- unsigned int st_ctime_nsec;
- unsigned int __unused4;
- unsigned int __unused5;
-};
-
-#endif /* _ASM_MICROBLAZE_STAT_H */
-
+#include <asm-generic/stat.h>
diff --git a/arch/microblaze/include/asm/swab.h b/arch/microblaze/include/asm/swab.h
index b375d7b..7847e56 100644
--- a/arch/microblaze/include/asm/swab.h
+++ b/arch/microblaze/include/asm/swab.h
@@ -1,8 +1 @@
-#ifndef _ASM_MICROBLAZE_SWAB_H
-#define _ASM_MICROBLAZE_SWAB_H
-
-#if defined(__GNUC__) && !defined(__STRICT_ANSI__) || defined(__KERNEL__)
-#define __SWAB_64_THRU_32__
-#endif
-
-#endif /* _ASM_MICROBLAZE_SWAB_H */
+#include <asm-generic/swab.h>
diff --git a/arch/microblaze/include/asm/syscalls.h b/arch/microblaze/include/asm/syscalls.h
index ddea9eb..720761c 100644
--- a/arch/microblaze/include/asm/syscalls.h
+++ b/arch/microblaze/include/asm/syscalls.h
@@ -1,48 +1,8 @@
#ifndef __ASM_MICROBLAZE_SYSCALLS_H
-#define __ASM_MICROBLAZE_SYSCALLS_H
-#ifdef __KERNEL__
-#include <linux/compiler.h>
-#include <linux/linkage.h>
-#include <linux/types.h>
-#include <linux/signal.h>
+asmlinkage long sys_clone(int flags, unsigned long stack, struct pt_regs *regs);
+#define sys_clone sys_clone
-/* FIXME will be removed */
-asmlinkage int sys_ipc(uint call, int first, int second,
- int third, void *ptr, long fifth);
+#include <asm-generic/syscalls.h>
-struct pt_regs;
-asmlinkage int sys_vfork(struct pt_regs *regs);
-asmlinkage int sys_clone(int flags, unsigned long stack, struct pt_regs *regs);
-asmlinkage int sys_execve(char __user *filenamei, char __user *__user *argv,
- char __user *__user *envp, struct pt_regs *regs);
-
-asmlinkage unsigned long sys_mmap2(unsigned long addr, size_t len,
- unsigned long prot, unsigned long flags,
- unsigned long fd, unsigned long pgoff);
-
-asmlinkage unsigned long sys_mmap(unsigned long addr, size_t len,
- unsigned long prot, unsigned long flags,
- unsigned long fd, off_t offset);
-
-/* from signal.c */
-asmlinkage int sys_sigsuspend(old_sigset_t mask, struct pt_regs *regs);
-
-asmlinkage int sys_rt_sigsuspend(sigset_t __user *unewset, size_t sigsetsize,
- struct pt_regs *regs);
-
-asmlinkage int sys_sigaction(int sig, const struct old_sigaction *act,
- struct old_sigaction *oact);
-
-asmlinkage long sys_rt_sigaction(int sig, const struct sigaction __user *act,
- struct sigaction __user *oact, size_t sigsetsize);
-
-asmlinkage int sys_sigaltstack(const stack_t __user *uss, stack_t __user *uoss,
- struct pt_regs *regs);
-
-asmlinkage int sys_sigreturn(struct pt_regs *regs);
-
-asmlinkage int sys_rt_sigreturn(struct pt_regs *regs);
-
-#endif /* __KERNEL__ */
#endif /* __ASM_MICROBLAZE_SYSCALLS_H */
diff --git a/arch/microblaze/include/asm/system.h b/arch/microblaze/include/asm/system.h
index c4e3088..b1ed615 100644
--- a/arch/microblaze/include/asm/system.h
+++ b/arch/microblaze/include/asm/system.h
@@ -13,6 +13,9 @@
#include <asm/setup.h>
#include <asm/irqflags.h>
+#include <asm-generic/cmpxchg.h>
+#include <asm-generic/cmpxchg-local.h>
+
struct task_struct;
struct thread_info;
diff --git a/arch/microblaze/include/asm/termbits.h b/arch/microblaze/include/asm/termbits.h
index a1b64bc..3935b10 100644
--- a/arch/microblaze/include/asm/termbits.h
+++ b/arch/microblaze/include/asm/termbits.h
@@ -1,203 +1 @@
-/*
- * Copyright (C) 2006 Atmark Techno, Inc.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
-#ifndef _ASM_MICROBLAZE_TERMBITS_H
-#define _ASM_MICROBLAZE_TERMBITS_H
-
-#include <linux/posix_types.h>
-
-typedef unsigned char cc_t;
-typedef unsigned int speed_t;
-typedef unsigned int tcflag_t;
-
-#define NCCS 19
-struct termios {
- tcflag_t c_iflag; /* input mode flags */
- tcflag_t c_oflag; /* output mode flags */
- tcflag_t c_cflag; /* control mode flags */
- tcflag_t c_lflag; /* local mode flags */
- cc_t c_line; /* line discipline */
- cc_t c_cc[NCCS]; /* control characters */
-};
-
-struct ktermios {
- tcflag_t c_iflag; /* input mode flags */
- tcflag_t c_oflag; /* output mode flags */
- tcflag_t c_cflag; /* control mode flags */
- tcflag_t c_lflag; /* local mode flags */
- cc_t c_line; /* line discipline */
- cc_t c_cc[NCCS]; /* control characters */
- speed_t c_ispeed; /* input speed */
- speed_t c_ospeed; /* output speed */
-};
-
-/* c_cc characters */
-
-#define VINTR 0
-#define VQUIT 1
-#define VERASE 2
-#define VKILL 3
-#define VEOF 4
-#define VTIME 5
-#define VMIN 6
-#define VSWTC 7
-#define VSTART 8
-#define VSTOP 9
-#define VSUSP 10
-#define VEOL 11
-#define VREPRINT 12
-#define VDISCARD 13
-#define VWERASE 14
-#define VLNEXT 15
-#define VEOL2 16
-
-/* c_iflag bits */
-
-#define IGNBRK 0000001
-#define BRKINT 0000002
-#define IGNPAR 0000004
-#define PARMRK 0000010
-#define INPCK 0000020
-#define ISTRIP 0000040
-#define INLCR 0000100
-#define IGNCR 0000200
-#define ICRNL 0000400
-#define IUCLC 0001000
-#define IXON 0002000
-#define IXANY 0004000
-#define IXOFF 0010000
-#define IMAXBEL 0020000
-#define IUTF8 0040000
-
-/* c_oflag bits */
-
-#define OPOST 0000001
-#define OLCUC 0000002
-#define ONLCR 0000004
-#define OCRNL 0000010
-#define ONOCR 0000020
-#define ONLRET 0000040
-#define OFILL 0000100
-#define OFDEL 0000200
-#define NLDLY 0000400
-#define NL0 0000000
-#define NL1 0000400
-#define CRDLY 0003000
-#define CR0 0000000
-#define CR1 0001000
-#define CR2 0002000
-#define CR3 0003000
-#define TABDLY 0014000
-#define TAB0 0000000
-#define TAB1 0004000
-#define TAB2 0010000
-#define TAB3 0014000
-#define XTABS 0014000
-#define BSDLY 0020000
-#define BS0 0000000
-#define BS1 0020000
-#define VTDLY 0040000
-#define VT0 0000000
-#define VT1 0040000
-#define FFDLY 0100000
-#define FF0 0000000
-#define FF1 0100000
-
-/* c_cflag bit meaning */
-
-#define CBAUD 0010017
-#define B0 0000000 /* hang up */
-#define B50 0000001
-#define B75 0000002
-#define B110 0000003
-#define B134 0000004
-#define B150 0000005
-#define B200 0000006
-#define B300 0000007
-#define B600 0000010
-#define B1200 0000011
-#define B1800 0000012
-#define B2400 0000013
-#define B4800 0000014
-#define B9600 0000015
-#define B19200 0000016
-#define B38400 0000017
-#define EXTA B19200
-#define EXTB B38400
-#define CSIZE 0000060
-#define CS5 0000000
-#define CS6 0000020
-#define CS7 0000040
-#define CS8 0000060
-#define CSTOPB 0000100
-#define CREAD 0000200
-#define PARENB 0000400
-#define PARODD 0001000
-#define HUPCL 0002000
-#define CLOCAL 0004000
-#define CBAUDEX 0010000
-#define B57600 0010001
-#define B115200 0010002
-#define B230400 0010003
-#define B460800 0010004
-#define B500000 0010005
-#define B576000 0010006
-#define B921600 0010007
-#define BOTHER 0010000
-#define B1000000 0010010
-#define B1152000 0010011
-#define B1500000 0010012
-#define B2000000 0010013
-#define B2500000 0010014
-#define B3000000 0010015
-#define B3500000 0010016
-#define B4000000 0010017
-#define CIBAUD 002003600000 /* input baud rate (not used) */
-#define CMSPAR 010000000000 /* mark or space (stick) parity */
-#define CRTSCTS 020000000000 /* flow control */
-
-#define IBSHIFT 16 /* Shift from CBAUD to CIBAUD */
-
-/* c_lflag bits */
-
-#define ISIG 0000001
-#define ICANON 0000002
-#define XCASE 0000004
-#define ECHO 0000010
-#define ECHOE 0000020
-#define ECHOK 0000040
-#define ECHONL 0000100
-#define NOFLSH 0000200
-#define TOSTOP 0000400
-#define ECHOCTL 0001000
-#define ECHOPRT 0002000
-#define ECHOKE 0004000
-#define FLUSHO 0010000
-#define PENDIN 0040000
-#define IEXTEN 0100000
-
-/* tcflow() and TCXONC use these */
-
-#define TCOOFF 0
-#define TCOON 1
-#define TCIOFF 2
-#define TCION 3
-
-/* tcflush() and TCFLSH use these */
-
-#define TCIFLUSH 0
-#define TCOFLUSH 1
-#define TCIOFLUSH 2
-
-/* tcsetattr uses these */
-
-#define TCSANOW 0
-#define TCSADRAIN 1
-#define TCSAFLUSH 2
-
-#endif /* _ASM_MICROBLAZE_TERMBITS_H */
+#include <asm-generic/termbits.h>
diff --git a/arch/microblaze/include/asm/termios.h b/arch/microblaze/include/asm/termios.h
index 47a46d1..280d78a 100644
--- a/arch/microblaze/include/asm/termios.h
+++ b/arch/microblaze/include/asm/termios.h
@@ -1,88 +1 @@
-/*
- * Copyright (C) 2006 Atmark Techno, Inc.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
-#ifndef _ASM_MICROBLAZE_TERMIOS_H
-#define _ASM_MICROBLAZE_TERMIOS_H
-
-#include <linux/string.h>
-#include <asm/termbits.h>
-#include <asm/ioctls.h>
-
-struct winsize {
- unsigned short ws_row;
- unsigned short ws_col;
- unsigned short ws_xpixel;
- unsigned short ws_ypixel;
-};
-
-#define NCC 8
-struct termio {
- unsigned short c_iflag; /* input mode flags */
- unsigned short c_oflag; /* output mode flags */
- unsigned short c_cflag; /* control mode flags */
- unsigned short c_lflag; /* local mode flags */
- unsigned char c_line; /* line discipline */
- unsigned char c_cc[NCC]; /* control characters */
-};
-
-#ifdef __KERNEL__
-/* intr=^C quit=^| erase=del kill=^U
- eof=^D vtime=\0 vmin=\1 sxtc=\0
- start=^Q stop=^S susp=^Z eol=\0
- reprint=^R discard=^U werase=^W lnext=^V
- eol2=\0
-*/
-#define INIT_C_CC "\003\034\177\025\004\0\1\0\021\023\032\0\022\017\027\026\0"
-#endif
-
-/* Modem lines */
-
-#define TIOCM_LE 0x001
-#define TIOCM_DTR 0x002
-#define TIOCM_RTS 0x004
-#define TIOCM_ST 0x008
-#define TIOCM_SR 0x010
-#define TIOCM_CTS 0x020
-#define TIOCM_CAR 0x040
-#define TIOCM_RNG 0x080
-#define TIOCM_DSR 0x100
-#define TIOCM_CD TIOCM_CAR
-#define TIOCM_RI TIOCM_RNG
-#define TIOCM_OUT1 0x2000
-#define TIOCM_OUT2 0x4000
-#define TIOCM_LOOP 0x8000
-
-/* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */
-
-/* Line disciplines */
-
-#define N_TTY 0
-#define N_SLIP 1
-#define N_MOUSE 2
-#define N_PPP 3
-#define N_STRIP 4
-#define N_AX25 5
-#define N_X25 6 /* X.25 async */
-#define N_6PACK 7
-#define N_MASC 8 /* Reserved for Mobitex module <kaz@cafe.net> */
-#define N_R3964 9 /* Reserved for Simatic R3964 module */
-#define N_PROFIBUS_FDL 10 /* Reserved for Profibus <Dave@mvhi.com> */
-#define N_IRDA 11 /* Linux IR - http://irda.sourceforge.net/ */
-#define N_SMSBLOCK 12 /* SMS block mode - for talking to GSM data cards
- about SMS messages */
-#define N_HDLC 13 /* synchronous HDLC */
-#define N_SYNC_PPP 14
-#define N_HCI 15 /* Bluetooth HCI UART */
-
-#ifdef __KERNEL__
-
-#include <asm-generic/termios-base.h>
-
-#endif /* __KERNEL__ */
-
-#endif /* _ASM_MICROBLAZE_TERMIOS_H */
+#include <asm-generic/termios.h>
diff --git a/arch/microblaze/include/asm/thread_info.h b/arch/microblaze/include/asm/thread_info.h
index 7fac444..6e92885 100644
--- a/arch/microblaze/include/asm/thread_info.h
+++ b/arch/microblaze/include/asm/thread_info.h
@@ -75,8 +75,6 @@
/*
* macros/functions for gaining access to the thread information structure
- *
- * preempt_count needs to be 1 initially, until the scheduler is functional.
*/
#define INIT_THREAD_INFO(tsk) \
{ \
@@ -84,7 +82,7 @@
.exec_domain = &default_exec_domain, \
.flags = 0, \
.cpu = 0, \
- .preempt_count = 1, \
+ .preempt_count = INIT_PREEMPT_COUNT, \
.addr_limit = KERNEL_DS, \
.restart_block = { \
.fn = do_no_restart_syscall, \
diff --git a/arch/microblaze/include/asm/timex.h b/arch/microblaze/include/asm/timex.h
index 678525d..befcf3d 100644
--- a/arch/microblaze/include/asm/timex.h
+++ b/arch/microblaze/include/asm/timex.h
@@ -9,10 +9,8 @@
#ifndef _ASM_MICROBLAZE_TIMEX_H
#define _ASM_MICROBLAZE_TIMEX_H
+#include <asm-generic/timex.h>
+
#define CLOCK_TICK_RATE 1000 /* Timer input freq. */
-typedef unsigned long cycles_t;
-
-#define get_cycles() (0)
-
#endif /* _ASM_TIMEX_H */
diff --git a/arch/microblaze/include/asm/types.h b/arch/microblaze/include/asm/types.h
index bebc018..b9e79bc 100644
--- a/arch/microblaze/include/asm/types.h
+++ b/arch/microblaze/include/asm/types.h
@@ -1,38 +1 @@
-/*
- * Copyright (C) Atmark Techno, Inc.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
-#ifndef _ASM_MICROBLAZE_TYPES_H
-#define _ASM_MICROBLAZE_TYPES_H
-
-/*
- * This file is never included by application software unless
- * explicitly requested (e.g., via linux/types.h) in which case the
- * application is Linux specific so (user-) name space pollution is
- * not a major issue. However, for interoperability, libraries still
- * need to be careful to avoid a name clashes.
- */
-
-#include <asm-generic/int-ll64.h>
-
-# ifndef __ASSEMBLY__
-
-typedef unsigned short umode_t;
-
-/*
- * These aren't exported outside the kernel to avoid name space clashes
- */
-# ifdef __KERNEL__
-# define BITS_PER_LONG 32
-
-/* Dma addresses are 32-bits wide. */
-
-typedef u32 dma_addr_t;
-
-# endif/* __KERNEL__ */
-# endif /* __ASSEMBLY__ */
-#endif /* _ASM_MICROBLAZE_TYPES_H */
+#include <asm-generic/types.h>
diff --git a/arch/microblaze/include/asm/ucontext.h b/arch/microblaze/include/asm/ucontext.h
index 11f6bb3..9bc07b9 100644
--- a/arch/microblaze/include/asm/ucontext.h
+++ b/arch/microblaze/include/asm/ucontext.h
@@ -1,22 +1 @@
-/*
- * Copyright (C) 2006 Atmark Techno, Inc.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
-#ifndef _ASM_MICROBLAZE_UCONTEXT_H
-#define _ASM_MICROBLAZE_UCONTEXT_H
-
-#include <asm/sigcontext.h>
-
-struct ucontext {
- unsigned long uc_flags;
- struct ucontext *uc_link;
- stack_t uc_stack;
- struct sigcontext uc_mcontext;
- sigset_t uc_sigmask; /* mask last for extensibility */
-};
-
-#endif /* _ASM_MICROBLAZE_UCONTEXT_H */
+#include <asm-generic/ucontext.h>
diff --git a/arch/microblaze/include/asm/unistd.h b/arch/microblaze/include/asm/unistd.h
index b5e2f5f..0b85232 100644
--- a/arch/microblaze/include/asm/unistd.h
+++ b/arch/microblaze/include/asm/unistd.h
@@ -380,8 +380,10 @@
#define __NR_accept04 362 /* new */
#define __NR_preadv 363 /* new */
#define __NR_pwritev 364 /* new */
+#define __NR_rt_tgsigqueueinfo 365 /* new */
+#define __NR_perf_counter_open 366 /* new */
-#define __NR_syscalls 365
+#define __NR_syscalls 367
#ifdef __KERNEL__
#ifndef __ASSEMBLY__
@@ -408,7 +410,7 @@
#define __ARCH_WANT_SYS_SIGPENDING
#define __ARCH_WANT_SYS_SIGPROCMASK
#define __ARCH_WANT_SYS_RT_SIGACTION
-/* #define __ARCH_WANT_SYS_RT_SIGSUSPEND */
+#define __ARCH_WANT_SYS_RT_SIGSUSPEND
/*
* "Conditional" syscalls
diff --git a/arch/microblaze/include/asm/vga.h b/arch/microblaze/include/asm/vga.h
index 8b13789..89d82fd 100644
--- a/arch/microblaze/include/asm/vga.h
+++ b/arch/microblaze/include/asm/vga.h
@@ -1 +1 @@
-
+#include <asm-generic/vga.h>
diff --git a/arch/microblaze/kernel/entry-nommu.S b/arch/microblaze/kernel/entry-nommu.S
index 1fce6b8..9083d85 100644
--- a/arch/microblaze/kernel/entry-nommu.S
+++ b/arch/microblaze/kernel/entry-nommu.S
@@ -551,30 +551,22 @@
rtid r14, 0
nop
-sys_vfork_wrapper:
- brid sys_vfork
+sys_vfork:
+ brid microblaze_vfork
addk r5, r1, r0
-sys_clone_wrapper:
- brid sys_clone
+sys_clone:
+ brid microblaze_clone
addk r7, r1, r0
-sys_execve_wrapper:
- brid sys_execve
+sys_execve:
+ brid microblaze_execve
addk r8, r1, r0
-sys_sigreturn_wrapper:
- brid sys_sigreturn
- addk r5, r1, r0
-
sys_rt_sigreturn_wrapper:
brid sys_rt_sigreturn
addk r5, r1, r0
-sys_sigsuspend_wrapper:
- brid sys_rt_sigsuspend
- addk r6, r1, r0
-
sys_rt_sigsuspend_wrapper:
brid sys_rt_sigsuspend
addk r7, r1, r0
diff --git a/arch/microblaze/kernel/entry.S b/arch/microblaze/kernel/entry.S
index 91a0e7b..c7353e7 100644
--- a/arch/microblaze/kernel/entry.S
+++ b/arch/microblaze/kernel/entry.S
@@ -429,12 +429,11 @@
brid ret_from_trap; /* Do normal trap return */
nop;
-C_ENTRY(sys_vfork_wrapper):
+C_ENTRY(sys_vfork):
+ brid microblaze_vfork /* Do real work (tail-call) */
la r5, r1, PTO
- brid sys_vfork /* Do real work (tail-call) */
- nop
-C_ENTRY(sys_clone_wrapper):
+C_ENTRY(sys_clone):
bnei r6, 1f; /* See if child SP arg (arg 1) is 0. */
lwi r6, r1, PTO+PT_R1; /* If so, use paret's stack ptr */
1: la r7, r1, PTO; /* Arg 2: parent context */
@@ -444,20 +443,9 @@
brid do_fork /* Do real work (tail-call) */
nop;
-C_ENTRY(sys_execve_wrapper):
+C_ENTRY(sys_execve):
la r8, r1, PTO; /* add user context as 4th arg */
- brid sys_execve; /* Do real work (tail-call).*/
- nop;
-
-C_ENTRY(sys_sigsuspend_wrapper):
- swi r3, r1, PTO+PT_R3; /* restore saved r3, r4 registers */
- swi r4, r1, PTO+PT_R4;
- la r6, r1, PTO; /* add user context as 2nd arg */
- bralid r15, sys_sigsuspend; /* Do real work.*/
- nop;
- lwi r3, r1, PTO+PT_R3; /* restore saved r3, r4 registers */
- lwi r4, r1, PTO+PT_R4;
- bri ret_from_trap /* fall through will not work here due to align */
+ brid microblaze_execve; /* Do real work (tail-call).*/
nop;
C_ENTRY(sys_rt_sigsuspend_wrapper):
@@ -471,18 +459,6 @@
bri ret_from_trap /* fall through will not work here due to align */
nop;
-
-C_ENTRY(sys_sigreturn_wrapper):
- swi r3, r1, PTO+PT_R3; /* restore saved r3, r4 registers */
- swi r4, r1, PTO+PT_R4;
- la r5, r1, PTO; /* add user context as 1st arg */
- brlid r15, sys_sigreturn; /* Do real work.*/
- nop;
- lwi r3, r1, PTO+PT_R3; /* restore saved r3, r4 registers */
- lwi r4, r1, PTO+PT_R4;
- bri ret_from_trap /* fall through will not work here due to align */
- nop;
-
C_ENTRY(sys_rt_sigreturn_wrapper):
swi r3, r1, PTO+PT_R3; /* restore saved r3, r4 registers */
swi r4, r1, PTO+PT_R4;
diff --git a/arch/microblaze/kernel/ptrace.c b/arch/microblaze/kernel/ptrace.c
index b86aa62..53ff39a 100644
--- a/arch/microblaze/kernel/ptrace.c
+++ b/arch/microblaze/kernel/ptrace.c
@@ -27,7 +27,6 @@
#include <linux/kernel.h>
#include <linux/mm.h>
#include <linux/sched.h>
-#include <linux/smp_lock.h>
#include <linux/ptrace.h>
#include <linux/signal.h>
diff --git a/arch/microblaze/kernel/signal.c b/arch/microblaze/kernel/signal.c
index 4c0e652..1c80e4f 100644
--- a/arch/microblaze/kernel/signal.c
+++ b/arch/microblaze/kernel/signal.c
@@ -21,7 +21,6 @@
#include <linux/sched.h>
#include <linux/mm.h>
#include <linux/smp.h>
-#include <linux/smp_lock.h>
#include <linux/kernel.h>
#include <linux/signal.h>
#include <linux/errno.h>
@@ -45,91 +44,8 @@
asmlinkage int do_signal(struct pt_regs *regs, sigset_t *oldset, int in_sycall);
-/*
- * Atomically swap in the new signal mask, and wait for a signal.
- */
-asmlinkage int
-sys_sigsuspend(old_sigset_t mask, struct pt_regs *regs)
-{
- sigset_t saveset;
- mask &= _BLOCKABLE;
- spin_lock_irq(¤t->sighand->siglock);
- saveset = current->blocked;
- siginitset(¤t->blocked, mask);
- recalc_sigpending();
- spin_unlock_irq(¤t->sighand->siglock);
-
- regs->r3 = -EINTR;
- while (1) {
- current->state = TASK_INTERRUPTIBLE;
- schedule();
- if (do_signal(regs, &saveset, 1))
- return -EINTR;
- }
-}
-
-asmlinkage int
-sys_rt_sigsuspend(sigset_t __user *unewset, size_t sigsetsize,
- struct pt_regs *regs)
-{
- sigset_t saveset, newset;
-
- /* XXX: Don't preclude handling different sized sigset_t's. */
- if (sigsetsize != sizeof(sigset_t))
- return -EINVAL;
-
- if (copy_from_user(&newset, unewset, sizeof(newset)))
- return -EFAULT;
- sigdelsetmask(&newset, ~_BLOCKABLE);
- spin_lock_irq(¤t->sighand->siglock);
- saveset = current->blocked;
- current->blocked = newset;
- recalc_sigpending();
- spin_unlock_irq(¤t->sighand->siglock);
-
- regs->r3 = -EINTR;
- while (1) {
- current->state = TASK_INTERRUPTIBLE;
- schedule();
- if (do_signal(regs, &saveset, 1))
- return -EINTR;
- }
-}
-
-asmlinkage int
-sys_sigaction(int sig, const struct old_sigaction *act,
- struct old_sigaction *oact)
-{
- struct k_sigaction new_ka, old_ka;
- int ret;
-
- if (act) {
- old_sigset_t mask;
- if (!access_ok(VERIFY_READ, act, sizeof(*act)) ||
- __get_user(new_ka.sa.sa_handler, &act->sa_handler) ||
- __get_user(new_ka.sa.sa_restorer, &act->sa_restorer))
- return -EFAULT;
- __get_user(new_ka.sa.sa_flags, &act->sa_flags);
- __get_user(mask, &act->sa_mask);
- siginitset(&new_ka.sa.sa_mask, mask);
- }
-
- ret = do_sigaction(sig, act ? &new_ka : NULL, oact ? &old_ka : NULL);
-
- if (!ret && oact) {
- if (!access_ok(VERIFY_WRITE, oact, sizeof(*oact)) ||
- __put_user(old_ka.sa.sa_handler, &oact->sa_handler) ||
- __put_user(old_ka.sa.sa_restorer, &oact->sa_restorer))
- return -EFAULT;
- __put_user(old_ka.sa.sa_flags, &oact->sa_flags);
- __put_user(old_ka.sa.sa_mask.sig[0], &oact->sa_mask);
- }
-
- return ret;
-}
-
-asmlinkage int
+asmlinkage long
sys_sigaltstack(const stack_t __user *uss, stack_t __user *uoss,
struct pt_regs *regs)
{
@@ -139,7 +55,6 @@
/*
* Do a signal return; undo the signal stack.
*/
-
struct sigframe {
struct sigcontext sc;
unsigned long extramask[_NSIG_WORDS-1];
@@ -176,40 +91,7 @@
return err;
}
-asmlinkage int sys_sigreturn(struct pt_regs *regs)
-{
- struct sigframe *frame =
- (struct sigframe *)(regs->r1 + STATE_SAVE_ARG_SPACE);
-
- sigset_t set;
- int rval;
-
- if (!access_ok(VERIFY_READ, frame, sizeof(*frame)))
- goto badframe;
-
- if (__get_user(set.sig[0], &frame->sc.oldmask)
- || (_NSIG_WORDS > 1
- && __copy_from_user(&set.sig[1], &frame->extramask,
- sizeof(frame->extramask))))
- goto badframe;
-
- sigdelsetmask(&set, ~_BLOCKABLE);
-
- spin_lock_irq(¤t->sighand->siglock);
- current->blocked = set;
- recalc_sigpending();
- spin_unlock_irq(¤t->sighand->siglock);
-
- if (restore_sigcontext(regs, &frame->sc, &rval))
- goto badframe;
- return rval;
-
-badframe:
- force_sig(SIGSEGV, current);
- return 0;
-}
-
-asmlinkage int sys_rt_sigreturn(struct pt_regs *regs)
+asmlinkage long sys_rt_sigreturn(struct pt_regs *regs)
{
struct rt_sigframe __user *frame =
(struct rt_sigframe __user *)(regs->r1 + STATE_SAVE_ARG_SPACE);
@@ -324,21 +206,17 @@
/* Set up to return from userspace. If provided, use a stub
already in userspace. */
/* minus 8 is offset to cater for "rtsd r15,8" */
- if (ka->sa.sa_flags & SA_RESTORER) {
- regs->r15 = ((unsigned long)ka->sa.sa_restorer)-8;
- } else {
- /* addi r12, r0, __NR_sigreturn */
- err |= __put_user(0x31800000 | __NR_rt_sigreturn ,
- frame->tramp + 0);
- /* brki r14, 0x8 */
- err |= __put_user(0xb9cc0008, frame->tramp + 1);
+ /* addi r12, r0, __NR_sigreturn */
+ err |= __put_user(0x31800000 | __NR_rt_sigreturn ,
+ frame->tramp + 0);
+ /* brki r14, 0x8 */
+ err |= __put_user(0xb9cc0008, frame->tramp + 1);
- /* Return from sighandler will jump to the tramp.
- Negative 8 offset because return is rtsd r15, 8 */
- regs->r15 = ((unsigned long)frame->tramp)-8;
+ /* Return from sighandler will jump to the tramp.
+ Negative 8 offset because return is rtsd r15, 8 */
+ regs->r15 = ((unsigned long)frame->tramp)-8;
- __invalidate_cache_sigtramp((unsigned long)frame->tramp);
- }
+ __invalidate_cache_sigtramp((unsigned long)frame->tramp);
if (err)
goto give_sigsegv;
@@ -405,7 +283,7 @@
* OK, we're invoking a handler
*/
-static void
+static int
handle_signal(unsigned long sig, struct k_sigaction *ka,
siginfo_t *info, sigset_t *oldset, struct pt_regs *regs)
{
@@ -426,6 +304,7 @@
recalc_sigpending();
spin_unlock_irq(¤t->sighand->siglock);
}
+ return 1;
}
/*
@@ -456,7 +335,9 @@
if (kernel_mode(regs))
return 1;
- if (!oldset)
+ if (current_thread_info()->status & TS_RESTORE_SIGMASK)
+ oldset = ¤t->saved_sigmask;
+ else
oldset = ¤t->blocked;
signr = get_signal_to_deliver(&info, &ka, regs, NULL);
@@ -464,13 +345,31 @@
/* Whee! Actually deliver the signal. */
if (in_syscall)
handle_restart(regs, &ka, 1);
- handle_signal(signr, &ka, &info, oldset, regs);
+ if (handle_signal(signr, &ka, &info, oldset, regs)) {
+ /*
+ * A signal was successfully delivered; the saved
+ * sigmask will have been stored in the signal frame,
+ * and will be restored by sigreturn, so we can simply
+ * clear the TS_RESTORE_SIGMASK flag.
+ */
+ current_thread_info()->status &=
+ ~TS_RESTORE_SIGMASK;
+ }
return 1;
}
if (in_syscall)
handle_restart(regs, NULL, 0);
+ /*
+ * If there's no signal to deliver, we just put the saved sigmask
+ * back.
+ */
+ if (current_thread_info()->status & TS_RESTORE_SIGMASK) {
+ current_thread_info()->status &= ~TS_RESTORE_SIGMASK;
+ sigprocmask(SIG_SETMASK, ¤t->saved_sigmask, NULL);
+ }
+
/* Did we come from a system call? */
return 0;
}
diff --git a/arch/microblaze/kernel/sys_microblaze.c b/arch/microblaze/kernel/sys_microblaze.c
index 31905ff..e000bce 100644
--- a/arch/microblaze/kernel/sys_microblaze.c
+++ b/arch/microblaze/kernel/sys_microblaze.c
@@ -15,7 +15,6 @@
#include <linux/errno.h>
#include <linux/mm.h>
#include <linux/smp.h>
-#include <linux/smp_lock.h>
#include <linux/syscalls.h>
#include <linux/sem.h>
#include <linux/msg.h>
@@ -39,7 +38,7 @@
*
* This is really horribly ugly. This will be remove with new toolchain.
*/
-asmlinkage int
+asmlinkage long
sys_ipc(uint call, int first, int second, int third, void *ptr, long fifth)
{
int version, ret;
@@ -134,20 +133,20 @@
return ret;
}
-asmlinkage int sys_vfork(struct pt_regs *regs)
+asmlinkage long microblaze_vfork(struct pt_regs *regs)
{
return do_fork(CLONE_VFORK | CLONE_VM | SIGCHLD, regs->r1,
regs, 0, NULL, NULL);
}
-asmlinkage int sys_clone(int flags, unsigned long stack, struct pt_regs *regs)
+asmlinkage long microblaze_clone(int flags, unsigned long stack, struct pt_regs *regs)
{
if (!stack)
stack = regs->r1;
return do_fork(flags, stack, regs, 0, NULL, NULL);
}
-asmlinkage int sys_execve(char __user *filenamei, char __user *__user *argv,
+asmlinkage long microblaze_execve(char __user *filenamei, char __user *__user *argv,
char __user *__user *envp, struct pt_regs *regs)
{
int error;
@@ -163,8 +162,8 @@
return error;
}
-asmlinkage unsigned long
-sys_mmap2(unsigned long addr, size_t len,
+asmlinkage long
+sys_mmap2(unsigned long addr, unsigned long len,
unsigned long prot, unsigned long flags,
unsigned long fd, unsigned long pgoff)
{
@@ -189,18 +188,18 @@
return ret;
}
-asmlinkage unsigned long sys_mmap(unsigned long addr, size_t len,
+asmlinkage long sys_mmap(unsigned long addr, unsigned long len,
unsigned long prot, unsigned long flags,
- unsigned long fd, off_t offset)
+ unsigned long fd, off_t pgoff)
{
int err = -EINVAL;
- if (offset & ~PAGE_MASK) {
+ if (pgoff & ~PAGE_MASK) {
printk(KERN_INFO "no pagemask in mmap\r\n");
goto out;
}
- err = sys_mmap2(addr, len, prot, flags, fd, offset >> PAGE_SHIFT);
+ err = sys_mmap2(addr, len, prot, flags, fd, pgoff >> PAGE_SHIFT);
out:
return err;
}
diff --git a/arch/microblaze/kernel/syscall_table.S b/arch/microblaze/kernel/syscall_table.S
index 376d178..31b32a6 100644
--- a/arch/microblaze/kernel/syscall_table.S
+++ b/arch/microblaze/kernel/syscall_table.S
@@ -15,7 +15,7 @@
.long sys_creat
.long sys_link
.long sys_unlink /* 10 */
- .long sys_execve_wrapper
+ .long sys_execve
.long sys_chdir
.long sys_time
.long sys_mknod
@@ -71,12 +71,12 @@
.long sys_getppid
.long sys_getpgrp /* 65 */
.long sys_setsid
- .long sys_sigaction
+ .long sys_ni_syscall /* sys_sigaction */
.long sys_sgetmask
.long sys_ssetmask
.long sys_setreuid /* 70 */
.long sys_setregid
- .long sys_sigsuspend_wrapper
+ .long sys_ni_syscall /* sys_sigsuspend_wrapper */
.long sys_sigpending
.long sys_sethostname
.long sys_setrlimit /* 75 */
@@ -123,8 +123,8 @@
.long sys_sysinfo
.long sys_ipc
.long sys_fsync
- .long sys_sigreturn_wrapper
- .long sys_clone_wrapper /* 120 */
+ .long sys_ni_syscall /* sys_sigreturn_wrapper */
+ .long sys_clone /* 120 */
.long sys_setdomainname
.long sys_newuname
.long sys_ni_syscall /* modify_ldt */
@@ -194,7 +194,7 @@
.long sys_sendfile
.long sys_ni_syscall /* reserved for streams1 */
.long sys_ni_syscall /* reserved for streams2 */
- .long sys_vfork_wrapper /* 190 */
+ .long sys_vfork /* 190 */
.long sys_getrlimit
.long sys_mmap2 /* mmap2 */
.long sys_truncate64
@@ -369,3 +369,5 @@
.long sys_ni_syscall
.long sys_ni_syscall
.long sys_ni_syscall
+ .long sys_rt_tgsigqueueinfo /* 365 */
+ .long sys_perf_counter_open
diff --git a/arch/microblaze/lib/Makefile b/arch/microblaze/lib/Makefile
index 71c8cb6..b579db0 100644
--- a/arch/microblaze/lib/Makefile
+++ b/arch/microblaze/lib/Makefile
@@ -2,7 +2,7 @@
# Makefile
#
-lib-y := memset.o checksum.o
+lib-y := memset.o
ifeq ($(CONFIG_OPT_LIB_ASM),y)
lib-y += fastcopy.o
diff --git a/arch/microblaze/lib/checksum.c b/arch/microblaze/lib/checksum.c
deleted file mode 100644
index f08e745..0000000
--- a/arch/microblaze/lib/checksum.c
+++ /dev/null
@@ -1,172 +0,0 @@
-/*
- *
- * INET An implementation of the TCP/IP protocol suite for the LINUX
- * operating system. INET is implemented using the BSD Socket
- * interface as the means of communication with the user level.
- *
- * IP/TCP/UDP checksumming routines
- *
- * Authors: Jorge Cwik, <jorge@laser.satlink.net>
- * Arnt Gulbrandsen, <agulbra@nvg.unit.no>
- * Tom May, <ftom@netcom.com>
- * Andreas Schwab, <schwab@issan.informatik.uni-dortmund.de>
- * Lots of code moved from tcp.c and ip.c; see those files
- * for more names.
- *
- * 03/02/96 Jes Sorensen, Andreas Schwab, Roman Hodek:
- * Fixed some nasty bugs, causing some horrible crashes.
- * A: At some points, the sum (%0) was used as
- * length-counter instead of the length counter
- * (%1). Thanks to Roman Hodek for pointing this out.
- * B: GCC seems to mess up if one uses too many
- * data-registers to hold input values and one tries to
- * specify d0 and d1 as scratch registers. Letting gcc
- * choose these registers itself solves the problem.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-/* Revised by Kenneth Albanowski for m68knommu. Basic problem: unaligned access
- kills, so most of the assembly has to go. */
-
-#include <linux/module.h>
-#include <net/checksum.h>
-
-#include <asm/byteorder.h>
-
-static inline unsigned short from32to16(unsigned long x)
-{
- /* add up 16-bit and 16-bit for 16+c bit */
- x = (x & 0xffff) + (x >> 16);
- /* add up carry.. */
- x = (x & 0xffff) + (x >> 16);
- return x;
-}
-
-static unsigned int do_csum(const unsigned char *buff, int len)
-{
- int odd, count;
- unsigned long result = 0;
-
- if (len <= 0)
- goto out;
- odd = 1 & (unsigned long) buff;
- if (odd) {
- result = *buff;
- len--;
- buff++;
- }
- count = len >> 1; /* nr of 16-bit words.. */
- if (count) {
- if (2 & (unsigned long) buff) {
- result += *(unsigned short *) buff;
- count--;
- len -= 2;
- buff += 2;
- }
- count >>= 1; /* nr of 32-bit words.. */
- if (count) {
- unsigned long carry = 0;
- do {
- unsigned long w = *(unsigned long *) buff;
- count--;
- buff += 4;
- result += carry;
- result += w;
- carry = (w > result);
- } while (count);
- result += carry;
- result = (result & 0xffff) + (result >> 16);
- }
- if (len & 2) {
- result += *(unsigned short *) buff;
- buff += 2;
- }
- }
- if (len & 1)
- result += (*buff << 8);
- result = from32to16(result);
- if (odd)
- result = ((result >> 8) & 0xff) | ((result & 0xff) << 8);
-out:
- return result;
-}
-
-/*
- * This is a version of ip_compute_csum() optimized for IP headers,
- * which always checksum on 4 octet boundaries.
- */
-__sum16 ip_fast_csum(const void *iph, unsigned int ihl)
-{
- return (__force __sum16)~do_csum(iph, ihl*4);
-}
-EXPORT_SYMBOL(ip_fast_csum);
-
-/*
- * computes the checksum of a memory block at buff, length len,
- * and adds in "sum" (32-bit)
- *
- * returns a 32-bit number suitable for feeding into itself
- * or csum_tcpudp_magic
- *
- * this function must be called with even lengths, except
- * for the last fragment, which may be odd
- *
- * it's best to have buff aligned on a 32-bit boundary
- */
-__wsum csum_partial(const void *buff, int len, __wsum wsum)
-{
- unsigned int sum = (__force unsigned int)wsum;
- unsigned int result = do_csum(buff, len);
-
- /* add in old sum, and carry.. */
- result += sum;
- if (sum > result)
- result += 1;
- return (__force __wsum)result;
-}
-EXPORT_SYMBOL(csum_partial);
-
-/*
- * this routine is used for miscellaneous IP-like checksums, mainly
- * in icmp.c
- */
-__sum16 ip_compute_csum(const void *buff, int len)
-{
- return (__force __sum16)~do_csum(buff, len);
-}
-EXPORT_SYMBOL(ip_compute_csum);
-
-/*
- * copy from fs while checksumming, otherwise like csum_partial
- */
-__wsum
-csum_partial_copy_from_user(const void __user *src, void *dst, int len,
- __wsum sum, int *csum_err)
-{
- int missing;
-
- missing = __copy_from_user(dst, src, len);
- if (missing) {
- memset(dst + len - missing, 0, missing);
- *csum_err = -EFAULT;
- } else
- *csum_err = 0;
-
- return csum_partial(dst, len, sum);
-}
-EXPORT_SYMBOL(csum_partial_copy_from_user);
-
-/*
- * copy from ds while checksumming, otherwise like csum_partial
- */
-__wsum
-csum_partial_copy(const void *src, void *dst, int len, __wsum sum)
-{
- memcpy(dst, src, len);
- return csum_partial(dst, len, sum);
-}
-EXPORT_SYMBOL(csum_partial_copy);
diff --git a/arch/microblaze/mm/init.c b/arch/microblaze/mm/init.c
index b5a701c..8d92c4e 100644
--- a/arch/microblaze/mm/init.c
+++ b/arch/microblaze/mm/init.c
@@ -80,15 +80,15 @@
memory_size = memory_end - memory_start;
PAGE_OFFSET = memory_start;
printk(KERN_INFO "%s: Main mem: 0x%x-0x%x, "
- "size 0x%08x\n", __func__, memory_start,
- memory_end, memory_size);
+ "size 0x%08x\n", __func__, (u32) memory_start,
+ (u32) memory_end, (u32) memory_size);
break;
}
}
if (!memory_start || !memory_end) {
panic("%s: Missing memory setting 0x%08x-0x%08x\n",
- __func__, memory_start, memory_end);
+ __func__, (u32) memory_start, (u32) memory_end);
}
/* reservation of region where is the kernel */
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 8c4be1f..3ca0fe1 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -22,6 +22,26 @@
config MACH_ALCHEMY
bool "Alchemy processor based machines"
+config AR7
+ bool "Texas Instruments AR7"
+ select BOOT_ELF32
+ select DMA_NONCOHERENT
+ select CEVT_R4K
+ select CSRC_R4K
+ select IRQ_CPU
+ select NO_EXCEPT_FILL
+ select SWAP_IO_SPACE
+ select SYS_HAS_CPU_MIPS32_R1
+ select SYS_HAS_EARLY_PRINTK
+ select SYS_SUPPORTS_32BIT_KERNEL
+ select SYS_SUPPORTS_LITTLE_ENDIAN
+ select GENERIC_GPIO
+ select GCD
+ select VLYNQ
+ help
+ Support for the Texas Instruments AR7 System-on-a-Chip
+ family: TNETD7100, 7200 and 7300.
+
config BASLER_EXCITE
bool "Basler eXcite smart camera"
select CEVT_R4K
@@ -209,7 +229,7 @@
select SYS_SUPPORTS_64BIT_KERNEL
select SYS_SUPPORTS_BIG_ENDIAN
select SYS_SUPPORTS_LITTLE_ENDIAN
- select SYS_SUPPORTS_MIPS_CMP if BROKEN # because SYNC_R4K is broken
+ select SYS_SUPPORTS_MIPS_CMP
select SYS_SUPPORTS_MULTITHREADING
select SYS_SUPPORTS_SMARTMIPS
help
@@ -247,6 +267,7 @@
select CEVT_R4K
select CSRC_R4K
select SYS_HAS_CPU_VR41XX
+ select ARCH_REQUIRE_GPIOLIB
config NXP_STB220
bool "NXP STB220 board"
@@ -1635,7 +1656,7 @@
config MIPS_CMP
bool "MIPS CMP framework support"
depends on SYS_SUPPORTS_MIPS_CMP
- select SYNC_R4K if BROKEN
+ select SYNC_R4K
select SYS_SUPPORTS_SMP
select SYS_SUPPORTS_SCHED_SMT if SMP
select WEAK_ORDERING
@@ -2147,11 +2168,11 @@
config ARCH_HIBERNATION_POSSIBLE
def_bool y
- depends on SYS_SUPPORTS_HOTPLUG_CPU
+ depends on SYS_SUPPORTS_HOTPLUG_CPU || !SMP
config ARCH_SUSPEND_POSSIBLE
def_bool y
- depends on SYS_SUPPORTS_HOTPLUG_CPU
+ depends on SYS_SUPPORTS_HOTPLUG_CPU || !SMP
source "kernel/power/Kconfig"
diff --git a/arch/mips/Makefile b/arch/mips/Makefile
index 807572a..861da51 100644
--- a/arch/mips/Makefile
+++ b/arch/mips/Makefile
@@ -173,6 +173,13 @@
#
#
+# Texas Instruments AR7
+#
+core-$(CONFIG_AR7) += arch/mips/ar7/
+cflags-$(CONFIG_AR7) += -I$(srctree)/arch/mips/include/asm/mach-ar7
+load-$(CONFIG_AR7) += 0xffffffff94100000
+
+#
# Acer PICA 61, Mips Magnum 4000 and Olivetti M700.
#
core-$(CONFIG_MACH_JAZZ) += arch/mips/jazz/
diff --git a/arch/mips/ar7/Makefile b/arch/mips/ar7/Makefile
new file mode 100644
index 0000000..7435e44
--- /dev/null
+++ b/arch/mips/ar7/Makefile
@@ -0,0 +1,10 @@
+
+obj-y := \
+ prom.o \
+ setup.o \
+ memory.o \
+ irq.o \
+ time.o \
+ platform.o \
+ gpio.o \
+ clock.o
diff --git a/arch/mips/ar7/clock.c b/arch/mips/ar7/clock.c
new file mode 100644
index 0000000..27dc666
--- /dev/null
+++ b/arch/mips/ar7/clock.c
@@ -0,0 +1,440 @@
+/*
+ * Copyright (C) 2007 Felix Fietkau <nbd@openwrt.org>
+ * Copyright (C) 2007 Eugene Konev <ejka@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/gcd.h>
+#include <linux/io.h>
+
+#include <asm/addrspace.h>
+#include <asm/mach-ar7/ar7.h>
+
+#define BOOT_PLL_SOURCE_MASK 0x3
+#define CPU_PLL_SOURCE_SHIFT 16
+#define BUS_PLL_SOURCE_SHIFT 14
+#define USB_PLL_SOURCE_SHIFT 18
+#define DSP_PLL_SOURCE_SHIFT 22
+#define BOOT_PLL_SOURCE_AFE 0
+#define BOOT_PLL_SOURCE_BUS 0
+#define BOOT_PLL_SOURCE_REF 1
+#define BOOT_PLL_SOURCE_XTAL 2
+#define BOOT_PLL_SOURCE_CPU 3
+#define BOOT_PLL_BYPASS 0x00000020
+#define BOOT_PLL_ASYNC_MODE 0x02000000
+#define BOOT_PLL_2TO1_MODE 0x00008000
+
+#define TNETD7200_CLOCK_ID_CPU 0
+#define TNETD7200_CLOCK_ID_DSP 1
+#define TNETD7200_CLOCK_ID_USB 2
+
+#define TNETD7200_DEF_CPU_CLK 211000000
+#define TNETD7200_DEF_DSP_CLK 125000000
+#define TNETD7200_DEF_USB_CLK 48000000
+
+struct tnetd7300_clock {
+ u32 ctrl;
+#define PREDIV_MASK 0x001f0000
+#define PREDIV_SHIFT 16
+#define POSTDIV_MASK 0x0000001f
+ u32 unused1[3];
+ u32 pll;
+#define MUL_MASK 0x0000f000
+#define MUL_SHIFT 12
+#define PLL_MODE_MASK 0x00000001
+#define PLL_NDIV 0x00000800
+#define PLL_DIV 0x00000002
+#define PLL_STATUS 0x00000001
+ u32 unused2[3];
+};
+
+struct tnetd7300_clocks {
+ struct tnetd7300_clock bus;
+ struct tnetd7300_clock cpu;
+ struct tnetd7300_clock usb;
+ struct tnetd7300_clock dsp;
+};
+
+struct tnetd7200_clock {
+ u32 ctrl;
+ u32 unused1[3];
+#define DIVISOR_ENABLE_MASK 0x00008000
+ u32 mul;
+ u32 prediv;
+ u32 postdiv;
+ u32 postdiv2;
+ u32 unused2[6];
+ u32 cmd;
+ u32 status;
+ u32 cmden;
+ u32 padding[15];
+};
+
+struct tnetd7200_clocks {
+ struct tnetd7200_clock cpu;
+ struct tnetd7200_clock dsp;
+ struct tnetd7200_clock usb;
+};
+
+int ar7_cpu_clock = 150000000;
+EXPORT_SYMBOL(ar7_cpu_clock);
+int ar7_bus_clock = 125000000;
+EXPORT_SYMBOL(ar7_bus_clock);
+int ar7_dsp_clock;
+EXPORT_SYMBOL(ar7_dsp_clock);
+
+static void approximate(int base, int target, int *prediv,
+ int *postdiv, int *mul)
+{
+ int i, j, k, freq, res = target;
+ for (i = 1; i <= 16; i++)
+ for (j = 1; j <= 32; j++)
+ for (k = 1; k <= 32; k++) {
+ freq = abs(base / j * i / k - target);
+ if (freq < res) {
+ res = freq;
+ *mul = i;
+ *prediv = j;
+ *postdiv = k;
+ }
+ }
+}
+
+static void calculate(int base, int target, int *prediv, int *postdiv,
+ int *mul)
+{
+ int tmp_gcd, tmp_base, tmp_freq;
+
+ for (*prediv = 1; *prediv <= 32; (*prediv)++) {
+ tmp_base = base / *prediv;
+ tmp_gcd = gcd(target, tmp_base);
+ *mul = target / tmp_gcd;
+ *postdiv = tmp_base / tmp_gcd;
+ if ((*mul < 1) || (*mul >= 16))
+ continue;
+ if ((*postdiv > 0) & (*postdiv <= 32))
+ break;
+ }
+
+ if (base / *prediv * *mul / *postdiv != target) {
+ approximate(base, target, prediv, postdiv, mul);
+ tmp_freq = base / *prediv * *mul / *postdiv;
+ printk(KERN_WARNING
+ "Adjusted requested frequency %d to %d\n",
+ target, tmp_freq);
+ }
+
+ printk(KERN_DEBUG "Clocks: prediv: %d, postdiv: %d, mul: %d\n",
+ *prediv, *postdiv, *mul);
+}
+
+static int tnetd7300_dsp_clock(void)
+{
+ u32 didr1, didr2;
+ u8 rev = ar7_chip_rev();
+ didr1 = readl((void *)KSEG1ADDR(AR7_REGS_GPIO + 0x18));
+ didr2 = readl((void *)KSEG1ADDR(AR7_REGS_GPIO + 0x1c));
+ if (didr2 & (1 << 23))
+ return 0;
+ if ((rev >= 0x23) && (rev != 0x57))
+ return 250000000;
+ if ((((didr2 & 0x1fff) << 10) | ((didr1 & 0xffc00000) >> 22))
+ > 4208000)
+ return 250000000;
+ return 0;
+}
+
+static int tnetd7300_get_clock(u32 shift, struct tnetd7300_clock *clock,
+ u32 *bootcr, u32 bus_clock)
+{
+ int product;
+ int base_clock = AR7_REF_CLOCK;
+ u32 ctrl = readl(&clock->ctrl);
+ u32 pll = readl(&clock->pll);
+ int prediv = ((ctrl & PREDIV_MASK) >> PREDIV_SHIFT) + 1;
+ int postdiv = (ctrl & POSTDIV_MASK) + 1;
+ int divisor = prediv * postdiv;
+ int mul = ((pll & MUL_MASK) >> MUL_SHIFT) + 1;
+
+ switch ((*bootcr & (BOOT_PLL_SOURCE_MASK << shift)) >> shift) {
+ case BOOT_PLL_SOURCE_BUS:
+ base_clock = bus_clock;
+ break;
+ case BOOT_PLL_SOURCE_REF:
+ base_clock = AR7_REF_CLOCK;
+ break;
+ case BOOT_PLL_SOURCE_XTAL:
+ base_clock = AR7_XTAL_CLOCK;
+ break;
+ case BOOT_PLL_SOURCE_CPU:
+ base_clock = ar7_cpu_clock;
+ break;
+ }
+
+ if (*bootcr & BOOT_PLL_BYPASS)
+ return base_clock / divisor;
+
+ if ((pll & PLL_MODE_MASK) == 0)
+ return (base_clock >> (mul / 16 + 1)) / divisor;
+
+ if ((pll & (PLL_NDIV | PLL_DIV)) == (PLL_NDIV | PLL_DIV)) {
+ product = (mul & 1) ?
+ (base_clock * mul) >> 1 :
+ (base_clock * (mul - 1)) >> 2;
+ return product / divisor;
+ }
+
+ if (mul == 16)
+ return base_clock / divisor;
+
+ return base_clock * mul / divisor;
+}
+
+static void tnetd7300_set_clock(u32 shift, struct tnetd7300_clock *clock,
+ u32 *bootcr, u32 frequency)
+{
+ int prediv, postdiv, mul;
+ int base_clock = ar7_bus_clock;
+
+ switch ((*bootcr & (BOOT_PLL_SOURCE_MASK << shift)) >> shift) {
+ case BOOT_PLL_SOURCE_BUS:
+ base_clock = ar7_bus_clock;
+ break;
+ case BOOT_PLL_SOURCE_REF:
+ base_clock = AR7_REF_CLOCK;
+ break;
+ case BOOT_PLL_SOURCE_XTAL:
+ base_clock = AR7_XTAL_CLOCK;
+ break;
+ case BOOT_PLL_SOURCE_CPU:
+ base_clock = ar7_cpu_clock;
+ break;
+ }
+
+ calculate(base_clock, frequency, &prediv, &postdiv, &mul);
+
+ writel(((prediv - 1) << PREDIV_SHIFT) | (postdiv - 1), &clock->ctrl);
+ msleep(1);
+ writel(4, &clock->pll);
+ while (readl(&clock->pll) & PLL_STATUS)
+ ;
+ writel(((mul - 1) << MUL_SHIFT) | (0xff << 3) | 0x0e, &clock->pll);
+ msleep(75);
+}
+
+static void __init tnetd7300_init_clocks(void)
+{
+ u32 *bootcr = (u32 *)ioremap_nocache(AR7_REGS_DCL, 4);
+ struct tnetd7300_clocks *clocks =
+ ioremap_nocache(UR8_REGS_CLOCKS,
+ sizeof(struct tnetd7300_clocks));
+
+ ar7_bus_clock = tnetd7300_get_clock(BUS_PLL_SOURCE_SHIFT,
+ &clocks->bus, bootcr, AR7_AFE_CLOCK);
+
+ if (*bootcr & BOOT_PLL_ASYNC_MODE)
+ ar7_cpu_clock = tnetd7300_get_clock(CPU_PLL_SOURCE_SHIFT,
+ &clocks->cpu, bootcr, AR7_AFE_CLOCK);
+ else
+ ar7_cpu_clock = ar7_bus_clock;
+
+ if (ar7_dsp_clock == 250000000)
+ tnetd7300_set_clock(DSP_PLL_SOURCE_SHIFT, &clocks->dsp,
+ bootcr, ar7_dsp_clock);
+
+ iounmap(clocks);
+ iounmap(bootcr);
+}
+
+static int tnetd7200_get_clock(int base, struct tnetd7200_clock *clock,
+ u32 *bootcr, u32 bus_clock)
+{
+ int divisor = ((readl(&clock->prediv) & 0x1f) + 1) *
+ ((readl(&clock->postdiv) & 0x1f) + 1);
+
+ if (*bootcr & BOOT_PLL_BYPASS)
+ return base / divisor;
+
+ return base * ((readl(&clock->mul) & 0xf) + 1) / divisor;
+}
+
+
+static void tnetd7200_set_clock(int base, struct tnetd7200_clock *clock,
+ int prediv, int postdiv, int postdiv2, int mul, u32 frequency)
+{
+ printk(KERN_INFO
+ "Clocks: base = %d, frequency = %u, prediv = %d, "
+ "postdiv = %d, postdiv2 = %d, mul = %d\n",
+ base, frequency, prediv, postdiv, postdiv2, mul);
+
+ writel(0, &clock->ctrl);
+ writel(DIVISOR_ENABLE_MASK | ((prediv - 1) & 0x1F), &clock->prediv);
+ writel((mul - 1) & 0xF, &clock->mul);
+
+ while (readl(&clock->status) & 0x1)
+ ; /* nop */
+
+ writel(DIVISOR_ENABLE_MASK | ((postdiv - 1) & 0x1F), &clock->postdiv);
+
+ writel(readl(&clock->cmden) | 1, &clock->cmden);
+ writel(readl(&clock->cmd) | 1, &clock->cmd);
+
+ while (readl(&clock->status) & 0x1)
+ ; /* nop */
+
+ writel(DIVISOR_ENABLE_MASK | ((postdiv2 - 1) & 0x1F), &clock->postdiv2);
+
+ writel(readl(&clock->cmden) | 1, &clock->cmden);
+ writel(readl(&clock->cmd) | 1, &clock->cmd);
+
+ while (readl(&clock->status) & 0x1)
+ ; /* nop */
+
+ writel(readl(&clock->ctrl) | 1, &clock->ctrl);
+}
+
+static int tnetd7200_get_clock_base(int clock_id, u32 *bootcr)
+{
+ if (*bootcr & BOOT_PLL_ASYNC_MODE)
+ /* Async */
+ switch (clock_id) {
+ case TNETD7200_CLOCK_ID_DSP:
+ return AR7_REF_CLOCK;
+ default:
+ return AR7_AFE_CLOCK;
+ }
+ else
+ /* Sync */
+ if (*bootcr & BOOT_PLL_2TO1_MODE)
+ /* 2:1 */
+ switch (clock_id) {
+ case TNETD7200_CLOCK_ID_DSP:
+ return AR7_REF_CLOCK;
+ default:
+ return AR7_AFE_CLOCK;
+ }
+ else
+ /* 1:1 */
+ return AR7_REF_CLOCK;
+}
+
+
+static void __init tnetd7200_init_clocks(void)
+{
+ u32 *bootcr = (u32 *)ioremap_nocache(AR7_REGS_DCL, 4);
+ struct tnetd7200_clocks *clocks =
+ ioremap_nocache(AR7_REGS_CLOCKS,
+ sizeof(struct tnetd7200_clocks));
+ int cpu_base, cpu_mul, cpu_prediv, cpu_postdiv;
+ int dsp_base, dsp_mul, dsp_prediv, dsp_postdiv;
+ int usb_base, usb_mul, usb_prediv, usb_postdiv;
+
+ cpu_base = tnetd7200_get_clock_base(TNETD7200_CLOCK_ID_CPU, bootcr);
+ dsp_base = tnetd7200_get_clock_base(TNETD7200_CLOCK_ID_DSP, bootcr);
+
+ if (*bootcr & BOOT_PLL_ASYNC_MODE) {
+ printk(KERN_INFO "Clocks: Async mode\n");
+
+ printk(KERN_INFO "Clocks: Setting DSP clock\n");
+ calculate(dsp_base, TNETD7200_DEF_DSP_CLK,
+ &dsp_prediv, &dsp_postdiv, &dsp_mul);
+ ar7_bus_clock =
+ ((dsp_base / dsp_prediv) * dsp_mul) / dsp_postdiv;
+ tnetd7200_set_clock(dsp_base, &clocks->dsp,
+ dsp_prediv, dsp_postdiv * 2, dsp_postdiv, dsp_mul * 2,
+ ar7_bus_clock);
+
+ printk(KERN_INFO "Clocks: Setting CPU clock\n");
+ calculate(cpu_base, TNETD7200_DEF_CPU_CLK, &cpu_prediv,
+ &cpu_postdiv, &cpu_mul);
+ ar7_cpu_clock =
+ ((cpu_base / cpu_prediv) * cpu_mul) / cpu_postdiv;
+ tnetd7200_set_clock(cpu_base, &clocks->cpu,
+ cpu_prediv, cpu_postdiv, -1, cpu_mul,
+ ar7_cpu_clock);
+
+ } else
+ if (*bootcr & BOOT_PLL_2TO1_MODE) {
+ printk(KERN_INFO "Clocks: Sync 2:1 mode\n");
+
+ printk(KERN_INFO "Clocks: Setting CPU clock\n");
+ calculate(cpu_base, TNETD7200_DEF_CPU_CLK, &cpu_prediv,
+ &cpu_postdiv, &cpu_mul);
+ ar7_cpu_clock = ((cpu_base / cpu_prediv) * cpu_mul)
+ / cpu_postdiv;
+ tnetd7200_set_clock(cpu_base, &clocks->cpu,
+ cpu_prediv, cpu_postdiv, -1, cpu_mul,
+ ar7_cpu_clock);
+
+ printk(KERN_INFO "Clocks: Setting DSP clock\n");
+ calculate(dsp_base, TNETD7200_DEF_DSP_CLK, &dsp_prediv,
+ &dsp_postdiv, &dsp_mul);
+ ar7_bus_clock = ar7_cpu_clock / 2;
+ tnetd7200_set_clock(dsp_base, &clocks->dsp,
+ dsp_prediv, dsp_postdiv * 2, dsp_postdiv,
+ dsp_mul * 2, ar7_bus_clock);
+ } else {
+ printk(KERN_INFO "Clocks: Sync 1:1 mode\n");
+
+ printk(KERN_INFO "Clocks: Setting DSP clock\n");
+ calculate(dsp_base, TNETD7200_DEF_DSP_CLK, &dsp_prediv,
+ &dsp_postdiv, &dsp_mul);
+ ar7_bus_clock = ((dsp_base / dsp_prediv) * dsp_mul)
+ / dsp_postdiv;
+ tnetd7200_set_clock(dsp_base, &clocks->dsp,
+ dsp_prediv, dsp_postdiv * 2, dsp_postdiv,
+ dsp_mul * 2, ar7_bus_clock);
+
+ ar7_cpu_clock = ar7_bus_clock;
+ }
+
+ printk(KERN_INFO "Clocks: Setting USB clock\n");
+ usb_base = ar7_bus_clock;
+ calculate(usb_base, TNETD7200_DEF_USB_CLK, &usb_prediv,
+ &usb_postdiv, &usb_mul);
+ tnetd7200_set_clock(usb_base, &clocks->usb,
+ usb_prediv, usb_postdiv, -1, usb_mul,
+ TNETD7200_DEF_USB_CLK);
+
+ ar7_dsp_clock = ar7_cpu_clock;
+
+ iounmap(clocks);
+ iounmap(bootcr);
+}
+
+int __init ar7_init_clocks(void)
+{
+ switch (ar7_chip_id()) {
+ case AR7_CHIP_7100:
+ case AR7_CHIP_7200:
+ tnetd7200_init_clocks();
+ break;
+ case AR7_CHIP_7300:
+ ar7_dsp_clock = tnetd7300_dsp_clock();
+ tnetd7300_init_clocks();
+ break;
+ default:
+ break;
+ }
+
+ return 0;
+}
+arch_initcall(ar7_init_clocks);
diff --git a/arch/mips/ar7/gpio.c b/arch/mips/ar7/gpio.c
new file mode 100644
index 0000000..74e14a3
--- /dev/null
+++ b/arch/mips/ar7/gpio.c
@@ -0,0 +1,48 @@
+/*
+ * Copyright (C) 2007 Felix Fietkau <nbd@openwrt.org>
+ * Copyright (C) 2007 Eugene Konev <ejka@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <linux/module.h>
+
+#include <asm/mach-ar7/gpio.h>
+
+static const char *ar7_gpio_list[AR7_GPIO_MAX];
+
+int gpio_request(unsigned gpio, const char *label)
+{
+ if (gpio >= AR7_GPIO_MAX)
+ return -EINVAL;
+
+ if (ar7_gpio_list[gpio])
+ return -EBUSY;
+
+ if (label)
+ ar7_gpio_list[gpio] = label;
+ else
+ ar7_gpio_list[gpio] = "busy";
+
+ return 0;
+}
+EXPORT_SYMBOL(gpio_request);
+
+void gpio_free(unsigned gpio)
+{
+ BUG_ON(!ar7_gpio_list[gpio]);
+ ar7_gpio_list[gpio] = NULL;
+}
+EXPORT_SYMBOL(gpio_free);
diff --git a/arch/mips/ar7/irq.c b/arch/mips/ar7/irq.c
new file mode 100644
index 0000000..c781556
--- /dev/null
+++ b/arch/mips/ar7/irq.c
@@ -0,0 +1,176 @@
+/*
+ * Copyright (C) 2006,2007 Felix Fietkau <nbd@openwrt.org>
+ * Copyright (C) 2006,2007 Eugene Konev <ejka@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <linux/interrupt.h>
+#include <linux/io.h>
+
+#include <asm/irq_cpu.h>
+#include <asm/mipsregs.h>
+#include <asm/mach-ar7/ar7.h>
+
+#define EXCEPT_OFFSET 0x80
+#define PACE_OFFSET 0xA0
+#define CHNLS_OFFSET 0x200
+
+#define REG_OFFSET(irq, reg) ((irq) / 32 * 0x4 + reg * 0x10)
+#define SEC_REG_OFFSET(reg) (EXCEPT_OFFSET + reg * 0x8)
+#define SEC_SR_OFFSET (SEC_REG_OFFSET(0)) /* 0x80 */
+#define CR_OFFSET(irq) (REG_OFFSET(irq, 1)) /* 0x10 */
+#define SEC_CR_OFFSET (SEC_REG_OFFSET(1)) /* 0x88 */
+#define ESR_OFFSET(irq) (REG_OFFSET(irq, 2)) /* 0x20 */
+#define SEC_ESR_OFFSET (SEC_REG_OFFSET(2)) /* 0x90 */
+#define ECR_OFFSET(irq) (REG_OFFSET(irq, 3)) /* 0x30 */
+#define SEC_ECR_OFFSET (SEC_REG_OFFSET(3)) /* 0x98 */
+#define PIR_OFFSET (0x40)
+#define MSR_OFFSET (0x44)
+#define PM_OFFSET(irq) (REG_OFFSET(irq, 5)) /* 0x50 */
+#define TM_OFFSET(irq) (REG_OFFSET(irq, 6)) /* 0x60 */
+
+#define REG(addr) ((u32 *)(KSEG1ADDR(AR7_REGS_IRQ) + addr))
+
+#define CHNL_OFFSET(chnl) (CHNLS_OFFSET + (chnl * 4))
+
+static int ar7_irq_base;
+
+static void ar7_unmask_irq(unsigned int irq)
+{
+ writel(1 << ((irq - ar7_irq_base) % 32),
+ REG(ESR_OFFSET(irq - ar7_irq_base)));
+}
+
+static void ar7_mask_irq(unsigned int irq)
+{
+ writel(1 << ((irq - ar7_irq_base) % 32),
+ REG(ECR_OFFSET(irq - ar7_irq_base)));
+}
+
+static void ar7_ack_irq(unsigned int irq)
+{
+ writel(1 << ((irq - ar7_irq_base) % 32),
+ REG(CR_OFFSET(irq - ar7_irq_base)));
+}
+
+static void ar7_unmask_sec_irq(unsigned int irq)
+{
+ writel(1 << (irq - ar7_irq_base - 40), REG(SEC_ESR_OFFSET));
+}
+
+static void ar7_mask_sec_irq(unsigned int irq)
+{
+ writel(1 << (irq - ar7_irq_base - 40), REG(SEC_ECR_OFFSET));
+}
+
+static void ar7_ack_sec_irq(unsigned int irq)
+{
+ writel(1 << (irq - ar7_irq_base - 40), REG(SEC_CR_OFFSET));
+}
+
+static struct irq_chip ar7_irq_type = {
+ .name = "AR7",
+ .unmask = ar7_unmask_irq,
+ .mask = ar7_mask_irq,
+ .ack = ar7_ack_irq
+};
+
+static struct irq_chip ar7_sec_irq_type = {
+ .name = "AR7",
+ .unmask = ar7_unmask_sec_irq,
+ .mask = ar7_mask_sec_irq,
+ .ack = ar7_ack_sec_irq,
+};
+
+static struct irqaction ar7_cascade_action = {
+ .handler = no_action,
+ .name = "AR7 cascade interrupt"
+};
+
+static void __init ar7_irq_init(int base)
+{
+ int i;
+ /*
+ * Disable interrupts and clear pending
+ */
+ writel(0xffffffff, REG(ECR_OFFSET(0)));
+ writel(0xff, REG(ECR_OFFSET(32)));
+ writel(0xffffffff, REG(SEC_ECR_OFFSET));
+ writel(0xffffffff, REG(CR_OFFSET(0)));
+ writel(0xff, REG(CR_OFFSET(32)));
+ writel(0xffffffff, REG(SEC_CR_OFFSET));
+
+ ar7_irq_base = base;
+
+ for (i = 0; i < 40; i++) {
+ writel(i, REG(CHNL_OFFSET(i)));
+ /* Primary IRQ's */
+ set_irq_chip_and_handler(base + i, &ar7_irq_type,
+ handle_level_irq);
+ /* Secondary IRQ's */
+ if (i < 32)
+ set_irq_chip_and_handler(base + i + 40,
+ &ar7_sec_irq_type,
+ handle_level_irq);
+ }
+
+ setup_irq(2, &ar7_cascade_action);
+ setup_irq(ar7_irq_base, &ar7_cascade_action);
+ set_c0_status(IE_IRQ0);
+}
+
+void __init arch_init_irq(void)
+{
+ mips_cpu_irq_init();
+ ar7_irq_init(8);
+}
+
+static void ar7_cascade(void)
+{
+ u32 status;
+ int i, irq;
+
+ /* Primary IRQ's */
+ irq = readl(REG(PIR_OFFSET)) & 0x3f;
+ if (irq) {
+ do_IRQ(ar7_irq_base + irq);
+ return;
+ }
+
+ /* Secondary IRQ's are cascaded through primary '0' */
+ writel(1, REG(CR_OFFSET(irq)));
+ status = readl(REG(SEC_SR_OFFSET));
+ for (i = 0; i < 32; i++) {
+ if (status & 1) {
+ do_IRQ(ar7_irq_base + i + 40);
+ return;
+ }
+ status >>= 1;
+ }
+
+ spurious_interrupt();
+}
+
+asmlinkage void plat_irq_dispatch(void)
+{
+ unsigned int pending = read_c0_status() & read_c0_cause() & ST0_IM;
+ if (pending & STATUSF_IP7) /* cpu timer */
+ do_IRQ(7);
+ else if (pending & STATUSF_IP2) /* int0 hardware line */
+ ar7_cascade();
+ else
+ spurious_interrupt();
+}
diff --git a/arch/mips/ar7/memory.c b/arch/mips/ar7/memory.c
new file mode 100644
index 0000000..46fed44
--- /dev/null
+++ b/arch/mips/ar7/memory.c
@@ -0,0 +1,72 @@
+/*
+ * Copyright (C) 2007 Felix Fietkau <nbd@openwrt.org>
+ * Copyright (C) 2007 Eugene Konev <ejka@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+#include <linux/bootmem.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/pfn.h>
+#include <linux/proc_fs.h>
+#include <linux/string.h>
+#include <linux/swap.h>
+
+#include <asm/bootinfo.h>
+#include <asm/page.h>
+#include <asm/sections.h>
+
+#include <asm/mach-ar7/ar7.h>
+#include <asm/mips-boards/prom.h>
+
+static int __init memsize(void)
+{
+ u32 size = (64 << 20);
+ u32 *addr = (u32 *)KSEG1ADDR(AR7_SDRAM_BASE + size - 4);
+ u32 *kernel_end = (u32 *)KSEG1ADDR(CPHYSADDR((u32)&_end));
+ u32 *tmpaddr = addr;
+
+ while (tmpaddr > kernel_end) {
+ *tmpaddr = (u32)tmpaddr;
+ size >>= 1;
+ tmpaddr -= size >> 2;
+ }
+
+ do {
+ tmpaddr += size >> 2;
+ if (*tmpaddr != (u32)tmpaddr)
+ break;
+ size <<= 1;
+ } while (size < (64 << 20));
+
+ writel(tmpaddr, &addr);
+
+ return size;
+}
+
+void __init prom_meminit(void)
+{
+ unsigned long pages;
+
+ pages = memsize() >> PAGE_SHIFT;
+ add_memory_region(PHYS_OFFSET, pages << PAGE_SHIFT,
+ BOOT_MEM_RAM);
+}
+
+void __init prom_free_prom_memory(void)
+{
+ /* Nothing to free */
+}
diff --git a/arch/mips/ar7/platform.c b/arch/mips/ar7/platform.c
new file mode 100644
index 0000000..5422449
--- /dev/null
+++ b/arch/mips/ar7/platform.c
@@ -0,0 +1,555 @@
+/*
+ * Copyright (C) 2006,2007 Felix Fietkau <nbd@openwrt.org>
+ * Copyright (C) 2006,2007 Eugene Konev <ejka@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/dma-mapping.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/physmap.h>
+#include <linux/serial.h>
+#include <linux/serial_8250.h>
+#include <linux/ioport.h>
+#include <linux/io.h>
+#include <linux/version.h>
+#include <linux/vlynq.h>
+#include <linux/leds.h>
+#include <linux/string.h>
+#include <linux/etherdevice.h>
+
+#include <asm/addrspace.h>
+#include <asm/mach-ar7/ar7.h>
+#include <asm/mach-ar7/gpio.h>
+#include <asm/mach-ar7/prom.h>
+
+struct plat_vlynq_data {
+ struct plat_vlynq_ops ops;
+ int gpio_bit;
+ int reset_bit;
+};
+
+
+static int vlynq_on(struct vlynq_device *dev)
+{
+ int result;
+ struct plat_vlynq_data *pdata = dev->dev.platform_data;
+
+ result = gpio_request(pdata->gpio_bit, "vlynq");
+ if (result)
+ goto out;
+
+ ar7_device_reset(pdata->reset_bit);
+
+ result = ar7_gpio_disable(pdata->gpio_bit);
+ if (result)
+ goto out_enabled;
+
+ result = ar7_gpio_enable(pdata->gpio_bit);
+ if (result)
+ goto out_enabled;
+
+ result = gpio_direction_output(pdata->gpio_bit, 0);
+ if (result)
+ goto out_gpio_enabled;
+
+ msleep(50);
+
+ gpio_set_value(pdata->gpio_bit, 1);
+ msleep(50);
+
+ return 0;
+
+out_gpio_enabled:
+ ar7_gpio_disable(pdata->gpio_bit);
+out_enabled:
+ ar7_device_disable(pdata->reset_bit);
+ gpio_free(pdata->gpio_bit);
+out:
+ return result;
+}
+
+static void vlynq_off(struct vlynq_device *dev)
+{
+ struct plat_vlynq_data *pdata = dev->dev.platform_data;
+ ar7_gpio_disable(pdata->gpio_bit);
+ gpio_free(pdata->gpio_bit);
+ ar7_device_disable(pdata->reset_bit);
+}
+
+static struct resource physmap_flash_resource = {
+ .name = "mem",
+ .flags = IORESOURCE_MEM,
+ .start = 0x10000000,
+ .end = 0x107fffff,
+};
+
+static struct resource cpmac_low_res[] = {
+ {
+ .name = "regs",
+ .flags = IORESOURCE_MEM,
+ .start = AR7_REGS_MAC0,
+ .end = AR7_REGS_MAC0 + 0x7ff,
+ },
+ {
+ .name = "irq",
+ .flags = IORESOURCE_IRQ,
+ .start = 27,
+ .end = 27,
+ },
+};
+
+static struct resource cpmac_high_res[] = {
+ {
+ .name = "regs",
+ .flags = IORESOURCE_MEM,
+ .start = AR7_REGS_MAC1,
+ .end = AR7_REGS_MAC1 + 0x7ff,
+ },
+ {
+ .name = "irq",
+ .flags = IORESOURCE_IRQ,
+ .start = 41,
+ .end = 41,
+ },
+};
+
+static struct resource vlynq_low_res[] = {
+ {
+ .name = "regs",
+ .flags = IORESOURCE_MEM,
+ .start = AR7_REGS_VLYNQ0,
+ .end = AR7_REGS_VLYNQ0 + 0xff,
+ },
+ {
+ .name = "irq",
+ .flags = IORESOURCE_IRQ,
+ .start = 29,
+ .end = 29,
+ },
+ {
+ .name = "mem",
+ .flags = IORESOURCE_MEM,
+ .start = 0x04000000,
+ .end = 0x04ffffff,
+ },
+ {
+ .name = "devirq",
+ .flags = IORESOURCE_IRQ,
+ .start = 80,
+ .end = 111,
+ },
+};
+
+static struct resource vlynq_high_res[] = {
+ {
+ .name = "regs",
+ .flags = IORESOURCE_MEM,
+ .start = AR7_REGS_VLYNQ1,
+ .end = AR7_REGS_VLYNQ1 + 0xff,
+ },
+ {
+ .name = "irq",
+ .flags = IORESOURCE_IRQ,
+ .start = 33,
+ .end = 33,
+ },
+ {
+ .name = "mem",
+ .flags = IORESOURCE_MEM,
+ .start = 0x0c000000,
+ .end = 0x0cffffff,
+ },
+ {
+ .name = "devirq",
+ .flags = IORESOURCE_IRQ,
+ .start = 112,
+ .end = 143,
+ },
+};
+
+static struct resource usb_res[] = {
+ {
+ .name = "regs",
+ .flags = IORESOURCE_MEM,
+ .start = AR7_REGS_USB,
+ .end = AR7_REGS_USB + 0xff,
+ },
+ {
+ .name = "irq",
+ .flags = IORESOURCE_IRQ,
+ .start = 32,
+ .end = 32,
+ },
+ {
+ .name = "mem",
+ .flags = IORESOURCE_MEM,
+ .start = 0x03400000,
+ .end = 0x034001fff,
+ },
+};
+
+static struct physmap_flash_data physmap_flash_data = {
+ .width = 2,
+};
+
+static struct plat_cpmac_data cpmac_low_data = {
+ .reset_bit = 17,
+ .power_bit = 20,
+ .phy_mask = 0x80000000,
+};
+
+static struct plat_cpmac_data cpmac_high_data = {
+ .reset_bit = 21,
+ .power_bit = 22,
+ .phy_mask = 0x7fffffff,
+};
+
+static struct plat_vlynq_data vlynq_low_data = {
+ .ops.on = vlynq_on,
+ .ops.off = vlynq_off,
+ .reset_bit = 20,
+ .gpio_bit = 18,
+};
+
+static struct plat_vlynq_data vlynq_high_data = {
+ .ops.on = vlynq_on,
+ .ops.off = vlynq_off,
+ .reset_bit = 16,
+ .gpio_bit = 19,
+};
+
+static struct platform_device physmap_flash = {
+ .id = 0,
+ .name = "physmap-flash",
+ .dev.platform_data = &physmap_flash_data,
+ .resource = &physmap_flash_resource,
+ .num_resources = 1,
+};
+
+static u64 cpmac_dma_mask = DMA_32BIT_MASK;
+static struct platform_device cpmac_low = {
+ .id = 0,
+ .name = "cpmac",
+ .dev = {
+ .dma_mask = &cpmac_dma_mask,
+ .coherent_dma_mask = DMA_32BIT_MASK,
+ .platform_data = &cpmac_low_data,
+ },
+ .resource = cpmac_low_res,
+ .num_resources = ARRAY_SIZE(cpmac_low_res),
+};
+
+static struct platform_device cpmac_high = {
+ .id = 1,
+ .name = "cpmac",
+ .dev = {
+ .dma_mask = &cpmac_dma_mask,
+ .coherent_dma_mask = DMA_32BIT_MASK,
+ .platform_data = &cpmac_high_data,
+ },
+ .resource = cpmac_high_res,
+ .num_resources = ARRAY_SIZE(cpmac_high_res),
+};
+
+static struct platform_device vlynq_low = {
+ .id = 0,
+ .name = "vlynq",
+ .dev.platform_data = &vlynq_low_data,
+ .resource = vlynq_low_res,
+ .num_resources = ARRAY_SIZE(vlynq_low_res),
+};
+
+static struct platform_device vlynq_high = {
+ .id = 1,
+ .name = "vlynq",
+ .dev.platform_data = &vlynq_high_data,
+ .resource = vlynq_high_res,
+ .num_resources = ARRAY_SIZE(vlynq_high_res),
+};
+
+
+static struct gpio_led default_leds[] = {
+ {
+ .name = "status",
+ .gpio = 8,
+ .active_low = 1,
+ },
+};
+
+static struct gpio_led dsl502t_leds[] = {
+ {
+ .name = "status",
+ .gpio = 9,
+ .active_low = 1,
+ },
+ {
+ .name = "ethernet",
+ .gpio = 7,
+ .active_low = 1,
+ },
+ {
+ .name = "usb",
+ .gpio = 12,
+ .active_low = 1,
+ },
+};
+
+static struct gpio_led dg834g_leds[] = {
+ {
+ .name = "ppp",
+ .gpio = 6,
+ .active_low = 1,
+ },
+ {
+ .name = "status",
+ .gpio = 7,
+ .active_low = 1,
+ },
+ {
+ .name = "adsl",
+ .gpio = 8,
+ .active_low = 1,
+ },
+ {
+ .name = "wifi",
+ .gpio = 12,
+ .active_low = 1,
+ },
+ {
+ .name = "power",
+ .gpio = 14,
+ .active_low = 1,
+ .default_trigger = "default-on",
+ },
+};
+
+static struct gpio_led fb_sl_leds[] = {
+ {
+ .name = "1",
+ .gpio = 7,
+ },
+ {
+ .name = "2",
+ .gpio = 13,
+ .active_low = 1,
+ },
+ {
+ .name = "3",
+ .gpio = 10,
+ .active_low = 1,
+ },
+ {
+ .name = "4",
+ .gpio = 12,
+ .active_low = 1,
+ },
+ {
+ .name = "5",
+ .gpio = 9,
+ .active_low = 1,
+ },
+};
+
+static struct gpio_led fb_fon_leds[] = {
+ {
+ .name = "1",
+ .gpio = 8,
+ },
+ {
+ .name = "2",
+ .gpio = 3,
+ .active_low = 1,
+ },
+ {
+ .name = "3",
+ .gpio = 5,
+ },
+ {
+ .name = "4",
+ .gpio = 4,
+ .active_low = 1,
+ },
+ {
+ .name = "5",
+ .gpio = 11,
+ .active_low = 1,
+ },
+};
+
+static struct gpio_led_platform_data ar7_led_data;
+
+static struct platform_device ar7_gpio_leds = {
+ .name = "leds-gpio",
+ .id = -1,
+ .dev = {
+ .platform_data = &ar7_led_data,
+ }
+};
+
+static struct platform_device ar7_udc = {
+ .id = -1,
+ .name = "ar7_udc",
+ .resource = usb_res,
+ .num_resources = ARRAY_SIZE(usb_res),
+};
+
+static inline unsigned char char2hex(char h)
+{
+ switch (h) {
+ case '0': case '1': case '2': case '3': case '4':
+ case '5': case '6': case '7': case '8': case '9':
+ return h - '0';
+ case 'A': case 'B': case 'C': case 'D': case 'E': case 'F':
+ return h - 'A' + 10;
+ case 'a': case 'b': case 'c': case 'd': case 'e': case 'f':
+ return h - 'a' + 10;
+ default:
+ return 0;
+ }
+}
+
+static void cpmac_get_mac(int instance, unsigned char *dev_addr)
+{
+ int i;
+ char name[5], default_mac[ETH_ALEN], *mac;
+
+ mac = NULL;
+ sprintf(name, "mac%c", 'a' + instance);
+ mac = prom_getenv(name);
+ if (!mac) {
+ sprintf(name, "mac%c", 'a');
+ mac = prom_getenv(name);
+ }
+ if (!mac) {
+ random_ether_addr(default_mac);
+ mac = default_mac;
+ }
+ for (i = 0; i < 6; i++)
+ dev_addr[i] = (char2hex(mac[i * 3]) << 4) +
+ char2hex(mac[i * 3 + 1]);
+}
+
+static void __init detect_leds(void)
+{
+ char *prid, *usb_prod;
+
+ /* Default LEDs */
+ ar7_led_data.num_leds = ARRAY_SIZE(default_leds);
+ ar7_led_data.leds = default_leds;
+
+ /* FIXME: the whole thing is unreliable */
+ prid = prom_getenv("ProductID");
+ usb_prod = prom_getenv("usb_prod");
+
+ /* If we can't get the product id from PROM, use the default LEDs */
+ if (!prid)
+ return;
+
+ if (strstr(prid, "Fritz_Box_FON")) {
+ ar7_led_data.num_leds = ARRAY_SIZE(fb_fon_leds);
+ ar7_led_data.leds = fb_fon_leds;
+ } else if (strstr(prid, "Fritz_Box_")) {
+ ar7_led_data.num_leds = ARRAY_SIZE(fb_sl_leds);
+ ar7_led_data.leds = fb_sl_leds;
+ } else if ((!strcmp(prid, "AR7RD") || !strcmp(prid, "AR7DB"))
+ && usb_prod != NULL && strstr(usb_prod, "DSL-502T")) {
+ ar7_led_data.num_leds = ARRAY_SIZE(dsl502t_leds);
+ ar7_led_data.leds = dsl502t_leds;
+ } else if (strstr(prid, "DG834")) {
+ ar7_led_data.num_leds = ARRAY_SIZE(dg834g_leds);
+ ar7_led_data.leds = dg834g_leds;
+ }
+}
+
+static int __init ar7_register_devices(void)
+{
+ int res;
+ static struct uart_port uart_port[2];
+
+ memset(uart_port, 0, sizeof(struct uart_port) * 2);
+
+ uart_port[0].type = PORT_16550A;
+ uart_port[0].line = 0;
+ uart_port[0].irq = AR7_IRQ_UART0;
+ uart_port[0].uartclk = ar7_bus_freq() / 2;
+ uart_port[0].iotype = UPIO_MEM32;
+ uart_port[0].mapbase = AR7_REGS_UART0;
+ uart_port[0].membase = ioremap(uart_port[0].mapbase, 256);
+ uart_port[0].regshift = 2;
+ res = early_serial_setup(&uart_port[0]);
+ if (res)
+ return res;
+
+
+ /* Only TNETD73xx have a second serial port */
+ if (ar7_has_second_uart()) {
+ uart_port[1].type = PORT_16550A;
+ uart_port[1].line = 1;
+ uart_port[1].irq = AR7_IRQ_UART1;
+ uart_port[1].uartclk = ar7_bus_freq() / 2;
+ uart_port[1].iotype = UPIO_MEM32;
+ uart_port[1].mapbase = UR8_REGS_UART1;
+ uart_port[1].membase = ioremap(uart_port[1].mapbase, 256);
+ uart_port[1].regshift = 2;
+ res = early_serial_setup(&uart_port[1]);
+ if (res)
+ return res;
+ }
+
+ res = platform_device_register(&physmap_flash);
+ if (res)
+ return res;
+
+ ar7_device_disable(vlynq_low_data.reset_bit);
+ res = platform_device_register(&vlynq_low);
+ if (res)
+ return res;
+
+ if (ar7_has_high_vlynq()) {
+ ar7_device_disable(vlynq_high_data.reset_bit);
+ res = platform_device_register(&vlynq_high);
+ if (res)
+ return res;
+ }
+
+ if (ar7_has_high_cpmac()) {
+ cpmac_get_mac(1, cpmac_high_data.dev_addr);
+ res = platform_device_register(&cpmac_high);
+ if (res)
+ return res;
+ } else {
+ cpmac_low_data.phy_mask = 0xffffffff;
+ }
+
+ cpmac_get_mac(0, cpmac_low_data.dev_addr);
+ res = platform_device_register(&cpmac_low);
+ if (res)
+ return res;
+
+ detect_leds();
+ res = platform_device_register(&ar7_gpio_leds);
+ if (res)
+ return res;
+
+ res = platform_device_register(&ar7_udc);
+
+ return res;
+}
+arch_initcall(ar7_register_devices);
diff --git a/arch/mips/ar7/prom.c b/arch/mips/ar7/prom.c
new file mode 100644
index 0000000..a320bce
--- /dev/null
+++ b/arch/mips/ar7/prom.c
@@ -0,0 +1,297 @@
+/*
+ * Carsten Langgaard, carstenl@mips.com
+ * Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved.
+ *
+ * This program is free software; you can distribute it and/or modify it
+ * under the terms of the GNU General Public License (Version 2) as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ * Putting things on the screen/serial line using YAMONs facilities.
+ */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/serial_reg.h>
+#include <linux/spinlock.h>
+#include <linux/module.h>
+#include <linux/string.h>
+#include <linux/io.h>
+#include <asm/bootinfo.h>
+
+#include <asm/mach-ar7/ar7.h>
+#include <asm/mach-ar7/prom.h>
+
+#define MAX_ENTRY 80
+
+struct env_var {
+ char *name;
+ char *value;
+};
+
+static struct env_var adam2_env[MAX_ENTRY];
+
+char *prom_getenv(const char *name)
+{
+ int i;
+ for (i = 0; (i < MAX_ENTRY) && adam2_env[i].name; i++)
+ if (!strcmp(name, adam2_env[i].name))
+ return adam2_env[i].value;
+
+ return NULL;
+}
+EXPORT_SYMBOL(prom_getenv);
+
+char * __init prom_getcmdline(void)
+{
+ return &(arcs_cmdline[0]);
+}
+
+static void __init ar7_init_cmdline(int argc, char *argv[])
+{
+ char *cp;
+ int actr;
+
+ actr = 1; /* Always ignore argv[0] */
+
+ cp = &(arcs_cmdline[0]);
+ while (actr < argc) {
+ strcpy(cp, argv[actr]);
+ cp += strlen(argv[actr]);
+ *cp++ = ' ';
+ actr++;
+ }
+ if (cp != &(arcs_cmdline[0])) {
+ /* get rid of trailing space */
+ --cp;
+ *cp = '\0';
+ }
+}
+
+struct psbl_rec {
+ u32 psbl_size;
+ u32 env_base;
+ u32 env_size;
+ u32 ffs_base;
+ u32 ffs_size;
+};
+
+static __initdata char psp_env_version[] = "TIENV0.8";
+
+struct psp_env_chunk {
+ u8 num;
+ u8 ctrl;
+ u16 csum;
+ u8 len;
+ char data[11];
+} __attribute__ ((packed));
+
+struct psp_var_map_entry {
+ u8 num;
+ char *value;
+};
+
+static struct psp_var_map_entry psp_var_map[] = {
+ { 1, "cpufrequency" },
+ { 2, "memsize" },
+ { 3, "flashsize" },
+ { 4, "modetty0" },
+ { 5, "modetty1" },
+ { 8, "maca" },
+ { 9, "macb" },
+ { 28, "sysfrequency" },
+ { 38, "mipsfrequency" },
+};
+
+/*
+
+Well-known variable (num is looked up in table above for matching variable name)
+Example: cpufrequency=211968000
++----+----+----+----+----+----+----+----+----+----+----+----+----+----+----+---
+| 01 |CTRL|CHECKSUM | 01 | _2 | _1 | _1 | _9 | _6 | _8 | _0 | _0 | _0 | \0 | FF
++----+----+----+----+----+----+----+----+----+----+----+----+----+----+----+---
+
+Name=Value pair in a single chunk
+Example: NAME=VALUE
++----+----+----+----+----+----+----+----+----+----+----+----+----+----+----+---
+| 00 |CTRL|CHECKSUM | 01 | _N | _A | _M | _E | _0 | _V | _A | _L | _U | _E | \0
++----+----+----+----+----+----+----+----+----+----+----+----+----+----+----+---
+
+Name=Value pair in 2 chunks (len is the number of chunks)
+Example: bootloaderVersion=1.3.7.15
++----+----+----+----+----+----+----+----+----+----+----+----+----+----+----+---
+| 00 |CTRL|CHECKSUM | 02 | _b | _o | _o | _t | _l | _o | _a | _d | _e | _r | _V
++----+----+----+----+----+----+----+----+----+----+----+----+----+----+----+---
+| _e | _r | _s | _i | _o | _n | \0 | _1 | _. | _3 | _. | _7 | _. | _1 | _5 | \0
++----+----+----+----+----+----+----+----+----+----+----+----+----+----+----+---
+
+Data is padded with 0xFF
+
+*/
+
+#define PSP_ENV_SIZE 4096
+
+static char psp_env_data[PSP_ENV_SIZE] = { 0, };
+
+static char * __init lookup_psp_var_map(u8 num)
+{
+ int i;
+
+ for (i = 0; i < sizeof(psp_var_map); i++)
+ if (psp_var_map[i].num == num)
+ return psp_var_map[i].value;
+
+ return NULL;
+}
+
+static void __init add_adam2_var(char *name, char *value)
+{
+ int i;
+ for (i = 0; i < MAX_ENTRY; i++) {
+ if (!adam2_env[i].name) {
+ adam2_env[i].name = name;
+ adam2_env[i].value = value;
+ return;
+ } else if (!strcmp(adam2_env[i].name, name)) {
+ adam2_env[i].value = value;
+ return;
+ }
+ }
+}
+
+static int __init parse_psp_env(void *psp_env_base)
+{
+ int i, n;
+ char *name, *value;
+ struct psp_env_chunk *chunks = (struct psp_env_chunk *)psp_env_data;
+
+ memcpy_fromio(chunks, psp_env_base, PSP_ENV_SIZE);
+
+ i = 1;
+ n = PSP_ENV_SIZE / sizeof(struct psp_env_chunk);
+ while (i < n) {
+ if ((chunks[i].num == 0xff) || ((i + chunks[i].len) > n))
+ break;
+ value = chunks[i].data;
+ if (chunks[i].num) {
+ name = lookup_psp_var_map(chunks[i].num);
+ } else {
+ name = value;
+ value += strlen(name) + 1;
+ }
+ if (name)
+ add_adam2_var(name, value);
+ i += chunks[i].len;
+ }
+ return 0;
+}
+
+static void __init ar7_init_env(struct env_var *env)
+{
+ int i;
+ struct psbl_rec *psbl = (struct psbl_rec *)(KSEG1ADDR(0x14000300));
+ void *psp_env = (void *)KSEG1ADDR(psbl->env_base);
+
+ if (strcmp(psp_env, psp_env_version) == 0) {
+ parse_psp_env(psp_env);
+ } else {
+ for (i = 0; i < MAX_ENTRY; i++, env++)
+ if (env->name)
+ add_adam2_var(env->name, env->value);
+ }
+}
+
+static void __init console_config(void)
+{
+#ifdef CONFIG_SERIAL_8250_CONSOLE
+ char console_string[40];
+ int baud = 0;
+ char parity = '\0', bits = '\0', flow = '\0';
+ char *s, *p;
+
+ if (strstr(prom_getcmdline(), "console="))
+ return;
+
+#ifdef CONFIG_KGDB
+ if (!strstr(prom_getcmdline(), "nokgdb")) {
+ strcat(prom_getcmdline(), " console=kgdb");
+ kgdb_enabled = 1;
+ return;
+ }
+#endif
+
+ s = prom_getenv("modetty0");
+ if (s) {
+ baud = simple_strtoul(s, &p, 10);
+ s = p;
+ if (*s == ',')
+ s++;
+ if (*s)
+ parity = *s++;
+ if (*s == ',')
+ s++;
+ if (*s)
+ bits = *s++;
+ if (*s == ',')
+ s++;
+ if (*s == 'h')
+ flow = 'r';
+ }
+
+ if (baud == 0)
+ baud = 38400;
+ if (parity != 'n' && parity != 'o' && parity != 'e')
+ parity = 'n';
+ if (bits != '7' && bits != '8')
+ bits = '8';
+
+ if (flow == 'r')
+ sprintf(console_string, " console=ttyS0,%d%c%c%c", baud,
+ parity, bits, flow);
+ else
+ sprintf(console_string, " console=ttyS0,%d%c%c", baud, parity,
+ bits);
+ strcat(prom_getcmdline(), console_string);
+#endif
+}
+
+void __init prom_init(void)
+{
+ ar7_init_cmdline(fw_arg0, (char **)fw_arg1);
+ ar7_init_env((struct env_var *)fw_arg2);
+ console_config();
+}
+
+#define PORT(offset) (KSEG1ADDR(AR7_REGS_UART0 + (offset * 4)))
+static inline unsigned int serial_in(int offset)
+{
+ return readl((void *)PORT(offset));
+}
+
+static inline void serial_out(int offset, int value)
+{
+ writel(value, (void *)PORT(offset));
+}
+
+char prom_getchar(void)
+{
+ while (!(serial_in(UART_LSR) & UART_LSR_DR))
+ ;
+ return serial_in(UART_RX);
+}
+
+int prom_putchar(char c)
+{
+ while ((serial_in(UART_LSR) & UART_LSR_TEMT) == 0)
+ ;
+ serial_out(UART_TX, c);
+ return 1;
+}
+
diff --git a/arch/mips/ar7/setup.c b/arch/mips/ar7/setup.c
new file mode 100644
index 0000000..6ebb5f1
--- /dev/null
+++ b/arch/mips/ar7/setup.c
@@ -0,0 +1,94 @@
+/*
+ * Carsten Langgaard, carstenl@mips.com
+ * Copyright (C) 2000 MIPS Technologies, Inc. All rights reserved.
+ *
+ * This program is free software; you can distribute it and/or modify it
+ * under the terms of the GNU General Public License (Version 2) as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ */
+#include <linux/version.h>
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/pm.h>
+#include <linux/time.h>
+
+#include <asm/reboot.h>
+#include <asm/mach-ar7/ar7.h>
+#include <asm/mach-ar7/prom.h>
+
+static void ar7_machine_restart(char *command)
+{
+ u32 *softres_reg = ioremap(AR7_REGS_RESET +
+ AR7_RESET_SOFTWARE, 1);
+ writel(1, softres_reg);
+}
+
+static void ar7_machine_halt(void)
+{
+ while (1)
+ ;
+}
+
+static void ar7_machine_power_off(void)
+{
+ u32 *power_reg = (u32 *)ioremap(AR7_REGS_POWER, 1);
+ u32 power_state = readl(power_reg) | (3 << 30);
+ writel(power_state, power_reg);
+ ar7_machine_halt();
+}
+
+const char *get_system_type(void)
+{
+ u16 chip_id = ar7_chip_id();
+ switch (chip_id) {
+ case AR7_CHIP_7300:
+ return "TI AR7 (TNETD7300)";
+ case AR7_CHIP_7100:
+ return "TI AR7 (TNETD7100)";
+ case AR7_CHIP_7200:
+ return "TI AR7 (TNETD7200)";
+ default:
+ return "TI AR7 (Unknown)";
+ }
+}
+
+static int __init ar7_init_console(void)
+{
+ return 0;
+}
+console_initcall(ar7_init_console);
+
+/*
+ * Initializes basic routines and structures pointers, memory size (as
+ * given by the bios and saves the command line.
+ */
+
+void __init plat_mem_setup(void)
+{
+ unsigned long io_base;
+
+ _machine_restart = ar7_machine_restart;
+ _machine_halt = ar7_machine_halt;
+ pm_power_off = ar7_machine_power_off;
+ panic_timeout = 3;
+
+ io_base = (unsigned long)ioremap(AR7_REGS_BASE, 0x10000);
+ if (!io_base)
+ panic("Can't remap IO base!\n");
+ set_io_port_base(io_base);
+
+ prom_meminit();
+
+ printk(KERN_INFO "%s, ID: 0x%04x, Revision: 0x%02x\n",
+ get_system_type(),
+ ar7_chip_id(), ar7_chip_rev());
+}
diff --git a/arch/mips/ar7/time.c b/arch/mips/ar7/time.c
new file mode 100644
index 0000000..a1fba89
--- /dev/null
+++ b/arch/mips/ar7/time.c
@@ -0,0 +1,30 @@
+/*
+ * Carsten Langgaard, carstenl@mips.com
+ * Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved.
+ *
+ * This program is free software; you can distribute it and/or modify it
+ * under the terms of the GNU General Public License (Version 2) as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ * Setting up the clock on the MIPS boards.
+ */
+
+#include <linux/init.h>
+#include <linux/time.h>
+
+#include <asm/time.h>
+#include <asm/mach-ar7/ar7.h>
+
+void __init plat_time_init(void)
+{
+ mips_hpt_frequency = ar7_cpu_freq() / 2;
+}
diff --git a/arch/mips/cavium-octeon/Makefile b/arch/mips/cavium-octeon/Makefile
index 7c0528b..d6903c3 100644
--- a/arch/mips/cavium-octeon/Makefile
+++ b/arch/mips/cavium-octeon/Makefile
@@ -14,9 +14,5 @@
obj-y += octeon-memcpy.o
obj-$(CONFIG_SMP) += smp.o
-obj-$(CONFIG_PCI) += pci-common.o
-obj-$(CONFIG_PCI) += pci.o
-obj-$(CONFIG_PCI) += pcie.o
-obj-$(CONFIG_PCI_MSI) += msi.o
EXTRA_CFLAGS += -Werror
diff --git a/arch/mips/cavium-octeon/dma-octeon.c b/arch/mips/cavium-octeon/dma-octeon.c
index 627c162..4b92bfc 100644
--- a/arch/mips/cavium-octeon/dma-octeon.c
+++ b/arch/mips/cavium-octeon/dma-octeon.c
@@ -29,7 +29,7 @@
#include <dma-coherence.h>
#ifdef CONFIG_PCI
-#include "pci-common.h"
+#include <asm/octeon/pci-octeon.h>
#endif
#define BAR2_PCI_ADDRESS 0x8000000000ul
diff --git a/arch/mips/cavium-octeon/pci-common.c b/arch/mips/cavium-octeon/pci-common.c
deleted file mode 100644
index cd029f8..0000000
--- a/arch/mips/cavium-octeon/pci-common.c
+++ /dev/null
@@ -1,137 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2005-2007 Cavium Networks
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/pci.h>
-#include <linux/interrupt.h>
-#include <linux/time.h>
-#include <linux/delay.h>
-#include "pci-common.h"
-
-typeof(pcibios_map_irq) *octeon_pcibios_map_irq;
-enum octeon_dma_bar_type octeon_dma_bar_type = OCTEON_DMA_BAR_TYPE_INVALID;
-
-/**
- * Map a PCI device to the appropriate interrupt line
- *
- * @param dev The Linux PCI device structure for the device to map
- * @param slot The slot number for this device on __BUS 0__. Linux
- * enumerates through all the bridges and figures out the
- * slot on Bus 0 where this device eventually hooks to.
- * @param pin The PCI interrupt pin read from the device, then swizzled
- * as it goes through each bridge.
- * @return Interrupt number for the device
- */
-int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
- if (octeon_pcibios_map_irq)
- return octeon_pcibios_map_irq(dev, slot, pin);
- else
- panic("octeon_pcibios_map_irq doesn't point to a "
- "pcibios_map_irq() function");
-}
-
-
-/**
- * Called to perform platform specific PCI setup
- *
- * @param dev
- * @return
- */
-int pcibios_plat_dev_init(struct pci_dev *dev)
-{
- uint16_t config;
- uint32_t dconfig;
- int pos;
- /*
- * Force the Cache line setting to 64 bytes. The standard
- * Linux bus scan doesn't seem to set it. Octeon really has
- * 128 byte lines, but Intel bridges get really upset if you
- * try and set values above 64 bytes. Value is specified in
- * 32bit words.
- */
- pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, 64 / 4);
- /* Set latency timers for all devices */
- pci_write_config_byte(dev, PCI_LATENCY_TIMER, 48);
-
- /* Enable reporting System errors and parity errors on all devices */
- /* Enable parity checking and error reporting */
- pci_read_config_word(dev, PCI_COMMAND, &config);
- config |= PCI_COMMAND_PARITY | PCI_COMMAND_SERR;
- pci_write_config_word(dev, PCI_COMMAND, config);
-
- if (dev->subordinate) {
- /* Set latency timers on sub bridges */
- pci_write_config_byte(dev, PCI_SEC_LATENCY_TIMER, 48);
- /* More bridge error detection */
- pci_read_config_word(dev, PCI_BRIDGE_CONTROL, &config);
- config |= PCI_BRIDGE_CTL_PARITY | PCI_BRIDGE_CTL_SERR;
- pci_write_config_word(dev, PCI_BRIDGE_CONTROL, config);
- }
-
- /* Enable the PCIe normal error reporting */
- pos = pci_find_capability(dev, PCI_CAP_ID_EXP);
- if (pos) {
- /* Update Device Control */
- pci_read_config_word(dev, pos + PCI_EXP_DEVCTL, &config);
- /* Correctable Error Reporting */
- config |= PCI_EXP_DEVCTL_CERE;
- /* Non-Fatal Error Reporting */
- config |= PCI_EXP_DEVCTL_NFERE;
- /* Fatal Error Reporting */
- config |= PCI_EXP_DEVCTL_FERE;
- /* Unsupported Request */
- config |= PCI_EXP_DEVCTL_URRE;
- pci_write_config_word(dev, pos + PCI_EXP_DEVCTL, config);
- }
-
- /* Find the Advanced Error Reporting capability */
- pos = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_ERR);
- if (pos) {
- /* Clear Uncorrectable Error Status */
- pci_read_config_dword(dev, pos + PCI_ERR_UNCOR_STATUS,
- &dconfig);
- pci_write_config_dword(dev, pos + PCI_ERR_UNCOR_STATUS,
- dconfig);
- /* Enable reporting of all uncorrectable errors */
- /* Uncorrectable Error Mask - turned on bits disable errors */
- pci_write_config_dword(dev, pos + PCI_ERR_UNCOR_MASK, 0);
- /*
- * Leave severity at HW default. This only controls if
- * errors are reported as uncorrectable or
- * correctable, not if the error is reported.
- */
- /* PCI_ERR_UNCOR_SEVER - Uncorrectable Error Severity */
- /* Clear Correctable Error Status */
- pci_read_config_dword(dev, pos + PCI_ERR_COR_STATUS, &dconfig);
- pci_write_config_dword(dev, pos + PCI_ERR_COR_STATUS, dconfig);
- /* Enable reporting of all correctable errors */
- /* Correctable Error Mask - turned on bits disable errors */
- pci_write_config_dword(dev, pos + PCI_ERR_COR_MASK, 0);
- /* Advanced Error Capabilities */
- pci_read_config_dword(dev, pos + PCI_ERR_CAP, &dconfig);
- /* ECRC Generation Enable */
- if (config & PCI_ERR_CAP_ECRC_GENC)
- config |= PCI_ERR_CAP_ECRC_GENE;
- /* ECRC Check Enable */
- if (config & PCI_ERR_CAP_ECRC_CHKC)
- config |= PCI_ERR_CAP_ECRC_CHKE;
- pci_write_config_dword(dev, pos + PCI_ERR_CAP, dconfig);
- /* PCI_ERR_HEADER_LOG - Header Log Register (16 bytes) */
- /* Report all errors to the root complex */
- pci_write_config_dword(dev, pos + PCI_ERR_ROOT_COMMAND,
- PCI_ERR_ROOT_CMD_COR_EN |
- PCI_ERR_ROOT_CMD_NONFATAL_EN |
- PCI_ERR_ROOT_CMD_FATAL_EN);
- /* Clear the Root status register */
- pci_read_config_dword(dev, pos + PCI_ERR_ROOT_STATUS, &dconfig);
- pci_write_config_dword(dev, pos + PCI_ERR_ROOT_STATUS, dconfig);
- }
-
- return 0;
-}
diff --git a/arch/mips/cavium-octeon/pci-common.h b/arch/mips/cavium-octeon/pci-common.h
deleted file mode 100644
index 74ae799..0000000
--- a/arch/mips/cavium-octeon/pci-common.h
+++ /dev/null
@@ -1,39 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2005-2007 Cavium Networks
- */
-#ifndef __OCTEON_PCI_COMMON_H__
-#define __OCTEON_PCI_COMMON_H__
-
-#include <linux/pci.h>
-
-/* Some PCI cards require delays when accessing config space. */
-#define PCI_CONFIG_SPACE_DELAY 10000
-
-/* pcibios_map_irq() is defined inside pci-common.c. All it does is call the
- Octeon specific version pointed to by this variable. This function needs to
- change for PCI or PCIe based hosts */
-extern typeof(pcibios_map_irq) *octeon_pcibios_map_irq;
-
-/* The following defines are only used when octeon_dma_bar_type =
- OCTEON_DMA_BAR_TYPE_BIG */
-#define OCTEON_PCI_BAR1_HOLE_BITS 5
-#define OCTEON_PCI_BAR1_HOLE_SIZE (1ul<<(OCTEON_PCI_BAR1_HOLE_BITS+3))
-
-enum octeon_dma_bar_type {
- OCTEON_DMA_BAR_TYPE_INVALID,
- OCTEON_DMA_BAR_TYPE_SMALL,
- OCTEON_DMA_BAR_TYPE_BIG,
- OCTEON_DMA_BAR_TYPE_PCIE
-};
-
-/**
- * This is a variable to tell the DMA mapping system in dma-octeon.c
- * how to map PCI DMA addresses.
- */
-extern enum octeon_dma_bar_type octeon_dma_bar_type;
-
-#endif
diff --git a/arch/mips/cobalt/buttons.c b/arch/mips/cobalt/buttons.c
index 9e14398..4eaec8b4 100644
--- a/arch/mips/cobalt/buttons.c
+++ b/arch/mips/cobalt/buttons.c
@@ -1,7 +1,7 @@
/*
* Cobalt buttons platform device.
*
- * Copyright (C) 2007 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ * Copyright (C) 2007 Yoichi Yuasa <yuasa@linux-mips.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
diff --git a/arch/mips/cobalt/lcd.c b/arch/mips/cobalt/lcd.c
index 0720e4f..0f1cd90 100644
--- a/arch/mips/cobalt/lcd.c
+++ b/arch/mips/cobalt/lcd.c
@@ -1,7 +1,7 @@
/*
* Registration of Cobalt LCD platform device.
*
- * Copyright (C) 2008 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ * Copyright (C) 2008 Yoichi Yuasa <yuasa@linux-mips.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
diff --git a/arch/mips/cobalt/led.c b/arch/mips/cobalt/led.c
index 1c6ebd4..d3ce6fa 100644
--- a/arch/mips/cobalt/led.c
+++ b/arch/mips/cobalt/led.c
@@ -1,7 +1,7 @@
/*
* Registration of Cobalt LED platform device.
*
- * Copyright (C) 2007 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ * Copyright (C) 2007 Yoichi Yuasa <yuasa@linux-mips.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
diff --git a/arch/mips/cobalt/mtd.c b/arch/mips/cobalt/mtd.c
index 2b088ef..691d620 100644
--- a/arch/mips/cobalt/mtd.c
+++ b/arch/mips/cobalt/mtd.c
@@ -1,7 +1,7 @@
/*
* Registration of Cobalt MTD device.
*
- * Copyright (C) 2006 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ * Copyright (C) 2006 Yoichi Yuasa <yuasa@linux-mips.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
diff --git a/arch/mips/cobalt/rtc.c b/arch/mips/cobalt/rtc.c
index e70794b..3ab3989 100644
--- a/arch/mips/cobalt/rtc.c
+++ b/arch/mips/cobalt/rtc.c
@@ -1,7 +1,7 @@
/*
* Registration of Cobalt RTC platform device.
*
- * Copyright (C) 2007 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ * Copyright (C) 2007 Yoichi Yuasa <yuasa@linux-mips.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
diff --git a/arch/mips/cobalt/serial.c b/arch/mips/cobalt/serial.c
index 53b8d0d..7cb51f5 100644
--- a/arch/mips/cobalt/serial.c
+++ b/arch/mips/cobalt/serial.c
@@ -1,7 +1,7 @@
/*
* Registration of Cobalt UART platform device.
*
- * Copyright (C) 2007 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ * Copyright (C) 2007 Yoichi Yuasa <yuasa@linux-mips.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
diff --git a/arch/mips/cobalt/time.c b/arch/mips/cobalt/time.c
index 4a570e7..0162f9e 100644
--- a/arch/mips/cobalt/time.c
+++ b/arch/mips/cobalt/time.c
@@ -1,7 +1,7 @@
/*
* Cobalt time initialization.
*
- * Copyright (C) 2007 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ * Copyright (C) 2007 Yoichi Yuasa <yuasa@linux-mips.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
diff --git a/arch/mips/configs/ar7_defconfig b/arch/mips/configs/ar7_defconfig
new file mode 100644
index 0000000..dad5b67
--- /dev/null
+++ b/arch/mips/configs/ar7_defconfig
@@ -0,0 +1,1182 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.30
+# Wed Jun 24 14:08:59 2009
+#
+CONFIG_MIPS=y
+
+#
+# Machine selection
+#
+# CONFIG_MACH_ALCHEMY is not set
+CONFIG_AR7=y
+# CONFIG_BASLER_EXCITE is not set
+# CONFIG_BCM47XX is not set
+# CONFIG_MIPS_COBALT is not set
+# CONFIG_MACH_DECSTATION is not set
+# CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
+# CONFIG_LEMOTE_FULONG is not set
+# CONFIG_MIPS_MALTA is not set
+# CONFIG_MIPS_SIM is not set
+# CONFIG_NEC_MARKEINS is not set
+# CONFIG_MACH_VR41XX is not set
+# CONFIG_NXP_STB220 is not set
+# CONFIG_NXP_STB225 is not set
+# CONFIG_PNX8550_JBS is not set
+# CONFIG_PNX8550_STB810 is not set
+# CONFIG_PMC_MSP is not set
+# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_SGI_IP22 is not set
+# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP28 is not set
+# CONFIG_SGI_IP32 is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_CRHONE is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_BIGSUR is not set
+# CONFIG_SNI_RM is not set
+# CONFIG_MACH_TX39XX is not set
+# CONFIG_MACH_TX49XX is not set
+# CONFIG_MIKROTIK_RB532 is not set
+# CONFIG_WR_PPMC is not set
+# CONFIG_CAVIUM_OCTEON_SIMULATOR is not set
+# CONFIG_CAVIUM_OCTEON_REFERENCE_BOARD is not set
+# CONFIG_ALCHEMY_GPIO_INDIRECT is not set
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_SUPPORTS_OPROFILE=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_CEVT_R4K_LIB=y
+CONFIG_CEVT_R4K=y
+CONFIG_CSRC_R4K_LIB=y
+CONFIG_CSRC_R4K=y
+CONFIG_DMA_NONCOHERENT=y
+CONFIG_DMA_NEED_PCI_MAP_STATE=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_SYS_HAS_EARLY_PRINTK=y
+# CONFIG_HOTPLUG_CPU is not set
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_GPIO=y
+# CONFIG_CPU_BIG_ENDIAN is not set
+CONFIG_CPU_LITTLE_ENDIAN=y
+CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
+CONFIG_IRQ_CPU=y
+CONFIG_NO_EXCEPT_FILL=y
+CONFIG_SWAP_IO_SPACE=y
+CONFIG_BOOT_ELF32=y
+CONFIG_MIPS_L1_CACHE_SHIFT=5
+
+#
+# CPU selection
+#
+# CONFIG_CPU_LOONGSON2 is not set
+CONFIG_CPU_MIPS32_R1=y
+# CONFIG_CPU_MIPS32_R2 is not set
+# CONFIG_CPU_MIPS64_R1 is not set
+# CONFIG_CPU_MIPS64_R2 is not set
+# CONFIG_CPU_R3000 is not set
+# CONFIG_CPU_TX39XX is not set
+# CONFIG_CPU_VR41XX is not set
+# CONFIG_CPU_R4300 is not set
+# CONFIG_CPU_R4X00 is not set
+# CONFIG_CPU_TX49XX is not set
+# CONFIG_CPU_R5000 is not set
+# CONFIG_CPU_R5432 is not set
+# CONFIG_CPU_R5500 is not set
+# CONFIG_CPU_R6000 is not set
+# CONFIG_CPU_NEVADA is not set
+# CONFIG_CPU_R8000 is not set
+# CONFIG_CPU_R10000 is not set
+# CONFIG_CPU_RM7000 is not set
+# CONFIG_CPU_RM9000 is not set
+# CONFIG_CPU_SB1 is not set
+# CONFIG_CPU_CAVIUM_OCTEON is not set
+CONFIG_SYS_HAS_CPU_MIPS32_R1=y
+CONFIG_CPU_MIPS32=y
+CONFIG_CPU_MIPSR1=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_HARDWARE_WATCHPOINTS=y
+
+#
+# Kernel type
+#
+CONFIG_32BIT=y
+# CONFIG_64BIT is not set
+CONFIG_PAGE_SIZE_4KB=y
+# CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
+# CONFIG_PAGE_SIZE_32KB is not set
+# CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_CPU_HAS_PREFETCH=y
+CONFIG_MIPS_MT_DISABLED=y
+# CONFIG_MIPS_MT_SMP is not set
+# CONFIG_MIPS_MT_SMTC is not set
+CONFIG_CPU_HAS_LLSC=y
+CONFIG_CPU_HAS_SYNC=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_CPU_SUPPORTS_HIGHMEM=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_TICK_ONESHOT=y
+# CONFIG_NO_HZ is not set
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+# CONFIG_HZ_48 is not set
+CONFIG_HZ_100=y
+# CONFIG_HZ_128 is not set
+# CONFIG_HZ_250 is not set
+# CONFIG_HZ_256 is not set
+# CONFIG_HZ_1000 is not set
+# CONFIG_HZ_1024 is not set
+CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
+CONFIG_HZ=100
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_KEXEC=y
+# CONFIG_SECCOMP is not set
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+CONFIG_RELAY=y
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+CONFIG_RD_LZMA=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+CONFIG_EMBEDDED=y
+CONFIG_SYSCTL_SYSCALL=y
+# CONFIG_KALLSYMS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+# CONFIG_ELF_CORE is not set
+# CONFIG_PCSPKR_PLATFORM is not set
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+
+#
+# Performance Counters
+#
+# CONFIG_VM_EVENT_COUNTERS is not set
+CONFIG_STRIP_ASM_SYMS=y
+# CONFIG_COMPAT_BRK is not set
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_SLOW_WORK is not set
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+CONFIG_IOSCHED_DEADLINE=y
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_AS is not set
+CONFIG_DEFAULT_DEADLINE=y
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="deadline"
+CONFIG_PROBE_INITRD_HEADER=y
+# CONFIG_FREEZER is not set
+
+#
+# Bus options (PCI, PCMCIA, EISA, ISA, TC)
+#
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+CONFIG_MMU=y
+# CONFIG_PCCARD is not set
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_HAVE_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+CONFIG_TRAD_SIGNALS=y
+
+#
+# Power management options
+#
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+# CONFIG_PM is not set
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_ASK_IP_FIB_HASH=y
+# CONFIG_IP_FIB_TRIE is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_MULTIPLE_TABLES=y
+CONFIG_IP_ROUTE_MULTIPATH=y
+CONFIG_IP_ROUTE_VERBOSE=y
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+CONFIG_IP_MROUTE=y
+# CONFIG_IP_PIMSM_V1 is not set
+# CONFIG_IP_PIMSM_V2 is not set
+CONFIG_ARPD=y
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+CONFIG_TCP_CONG_ADVANCED=y
+# CONFIG_TCP_CONG_BIC is not set
+# CONFIG_TCP_CONG_CUBIC is not set
+CONFIG_TCP_CONG_WESTWOOD=y
+# CONFIG_TCP_CONG_HTCP is not set
+# CONFIG_TCP_CONG_HSTCP is not set
+# CONFIG_TCP_CONG_HYBLA is not set
+# CONFIG_TCP_CONG_VEGAS is not set
+# CONFIG_TCP_CONG_SCALABLE is not set
+# CONFIG_TCP_CONG_LP is not set
+# CONFIG_TCP_CONG_VENO is not set
+# CONFIG_TCP_CONG_YEAH is not set
+# CONFIG_TCP_CONG_ILLINOIS is not set
+# CONFIG_DEFAULT_BIC is not set
+# CONFIG_DEFAULT_CUBIC is not set
+# CONFIG_DEFAULT_HTCP is not set
+# CONFIG_DEFAULT_VEGAS is not set
+CONFIG_DEFAULT_WESTWOOD=y
+# CONFIG_DEFAULT_RENO is not set
+CONFIG_DEFAULT_TCP_CONG="westwood"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
+# CONFIG_BRIDGE_NETFILTER is not set
+
+#
+# Core Netfilter Configuration
+#
+# CONFIG_NETFILTER_NETLINK_QUEUE is not set
+# CONFIG_NETFILTER_NETLINK_LOG is not set
+CONFIG_NF_CONNTRACK=m
+# CONFIG_NF_CT_ACCT is not set
+CONFIG_NF_CONNTRACK_MARK=y
+# CONFIG_NF_CONNTRACK_EVENTS is not set
+# CONFIG_NF_CT_PROTO_DCCP is not set
+# CONFIG_NF_CT_PROTO_SCTP is not set
+# CONFIG_NF_CT_PROTO_UDPLITE is not set
+# CONFIG_NF_CONNTRACK_AMANDA is not set
+CONFIG_NF_CONNTRACK_FTP=m
+# CONFIG_NF_CONNTRACK_H323 is not set
+CONFIG_NF_CONNTRACK_IRC=m
+# CONFIG_NF_CONNTRACK_NETBIOS_NS is not set
+# CONFIG_NF_CONNTRACK_PPTP is not set
+# CONFIG_NF_CONNTRACK_SANE is not set
+# CONFIG_NF_CONNTRACK_SIP is not set
+CONFIG_NF_CONNTRACK_TFTP=m
+# CONFIG_NF_CT_NETLINK is not set
+# CONFIG_NETFILTER_TPROXY is not set
+CONFIG_NETFILTER_XTABLES=m
+# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
+# CONFIG_NETFILTER_XT_TARGET_CONNMARK is not set
+# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
+# CONFIG_NETFILTER_XT_TARGET_HL is not set
+# CONFIG_NETFILTER_XT_TARGET_LED is not set
+# CONFIG_NETFILTER_XT_TARGET_MARK is not set
+# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
+# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
+CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
+# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set
+# CONFIG_NETFILTER_XT_TARGET_TRACE is not set
+CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
+# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set
+# CONFIG_NETFILTER_XT_MATCH_CLUSTER is not set
+# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
+# CONFIG_NETFILTER_XT_MATCH_CONNBYTES is not set
+# CONFIG_NETFILTER_XT_MATCH_CONNLIMIT is not set
+# CONFIG_NETFILTER_XT_MATCH_CONNMARK is not set
+# CONFIG_NETFILTER_XT_MATCH_CONNTRACK is not set
+# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
+# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
+# CONFIG_NETFILTER_XT_MATCH_ESP is not set
+# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
+# CONFIG_NETFILTER_XT_MATCH_HELPER is not set
+# CONFIG_NETFILTER_XT_MATCH_HL is not set
+# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
+# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
+CONFIG_NETFILTER_XT_MATCH_LIMIT=m
+CONFIG_NETFILTER_XT_MATCH_MAC=m
+# CONFIG_NETFILTER_XT_MATCH_MARK is not set
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
+# CONFIG_NETFILTER_XT_MATCH_OWNER is not set
+# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
+# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
+# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set
+# CONFIG_NETFILTER_XT_MATCH_REALM is not set
+# CONFIG_NETFILTER_XT_MATCH_RECENT is not set
+# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
+CONFIG_NETFILTER_XT_MATCH_STATE=m
+# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
+# CONFIG_NETFILTER_XT_MATCH_STRING is not set
+# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set
+# CONFIG_NETFILTER_XT_MATCH_TIME is not set
+# CONFIG_NETFILTER_XT_MATCH_U32 is not set
+# CONFIG_IP_VS is not set
+
+#
+# IP: Netfilter Configuration
+#
+CONFIG_NF_DEFRAG_IPV4=m
+CONFIG_NF_CONNTRACK_IPV4=m
+CONFIG_NF_CONNTRACK_PROC_COMPAT=y
+# CONFIG_IP_NF_QUEUE is not set
+CONFIG_IP_NF_IPTABLES=m
+# CONFIG_IP_NF_MATCH_ADDRTYPE is not set
+# CONFIG_IP_NF_MATCH_AH is not set
+# CONFIG_IP_NF_MATCH_ECN is not set
+# CONFIG_IP_NF_MATCH_TTL is not set
+CONFIG_IP_NF_FILTER=m
+CONFIG_IP_NF_TARGET_REJECT=m
+CONFIG_IP_NF_TARGET_LOG=m
+# CONFIG_IP_NF_TARGET_ULOG is not set
+CONFIG_NF_NAT=m
+CONFIG_NF_NAT_NEEDED=y
+CONFIG_IP_NF_TARGET_MASQUERADE=m
+# CONFIG_IP_NF_TARGET_NETMAP is not set
+# CONFIG_IP_NF_TARGET_REDIRECT is not set
+# CONFIG_NF_NAT_SNMP_BASIC is not set
+CONFIG_NF_NAT_FTP=m
+CONFIG_NF_NAT_IRC=m
+CONFIG_NF_NAT_TFTP=m
+# CONFIG_NF_NAT_AMANDA is not set
+# CONFIG_NF_NAT_PPTP is not set
+# CONFIG_NF_NAT_H323 is not set
+# CONFIG_NF_NAT_SIP is not set
+CONFIG_IP_NF_MANGLE=m
+# CONFIG_IP_NF_TARGET_CLUSTERIP is not set
+# CONFIG_IP_NF_TARGET_ECN is not set
+# CONFIG_IP_NF_TARGET_TTL is not set
+CONFIG_IP_NF_RAW=m
+# CONFIG_IP_NF_ARPTABLES is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+CONFIG_ATM=m
+# CONFIG_ATM_CLIP is not set
+# CONFIG_ATM_LANE is not set
+CONFIG_ATM_BR2684=m
+CONFIG_ATM_BR2684_IPFILTER=y
+CONFIG_STP=y
+CONFIG_BRIDGE=y
+# CONFIG_NET_DSA is not set
+CONFIG_VLAN_8021Q=y
+# CONFIG_VLAN_8021Q_GVRP is not set
+# CONFIG_DECNET is not set
+CONFIG_LLC=y
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
+CONFIG_NET_SCHED=y
+
+#
+# Queueing/Scheduling
+#
+# CONFIG_NET_SCH_CBQ is not set
+# CONFIG_NET_SCH_HTB is not set
+# CONFIG_NET_SCH_HFSC is not set
+# CONFIG_NET_SCH_ATM is not set
+# CONFIG_NET_SCH_PRIO is not set
+# CONFIG_NET_SCH_MULTIQ is not set
+# CONFIG_NET_SCH_RED is not set
+# CONFIG_NET_SCH_SFQ is not set
+# CONFIG_NET_SCH_TEQL is not set
+# CONFIG_NET_SCH_TBF is not set
+# CONFIG_NET_SCH_GRED is not set
+# CONFIG_NET_SCH_DSMARK is not set
+# CONFIG_NET_SCH_NETEM is not set
+# CONFIG_NET_SCH_DRR is not set
+# CONFIG_NET_SCH_INGRESS is not set
+
+#
+# Classification
+#
+# CONFIG_NET_CLS_BASIC is not set
+# CONFIG_NET_CLS_TCINDEX is not set
+# CONFIG_NET_CLS_ROUTE4 is not set
+# CONFIG_NET_CLS_FW is not set
+# CONFIG_NET_CLS_U32 is not set
+# CONFIG_NET_CLS_RSVP is not set
+# CONFIG_NET_CLS_RSVP6 is not set
+# CONFIG_NET_CLS_FLOW is not set
+# CONFIG_NET_EMATCH is not set
+CONFIG_NET_CLS_ACT=y
+CONFIG_NET_ACT_POLICE=y
+# CONFIG_NET_ACT_GACT is not set
+# CONFIG_NET_ACT_MIRRED is not set
+# CONFIG_NET_ACT_IPT is not set
+# CONFIG_NET_ACT_NAT is not set
+# CONFIG_NET_ACT_PEDIT is not set
+# CONFIG_NET_ACT_SIMP is not set
+# CONFIG_NET_ACT_SKBEDIT is not set
+CONFIG_NET_SCH_FIFO=y
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+CONFIG_HAMRADIO=y
+
+#
+# Packet Radio protocols
+#
+# CONFIG_AX25 is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+CONFIG_FIB_RULES=y
+CONFIG_WIRELESS=y
+CONFIG_CFG80211=m
+# CONFIG_CFG80211_REG_DEBUG is not set
+# CONFIG_CFG80211_DEBUGFS is not set
+# CONFIG_WIRELESS_OLD_REGULATORY is not set
+CONFIG_WIRELESS_EXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
+# CONFIG_LIB80211 is not set
+CONFIG_MAC80211=m
+CONFIG_MAC80211_DEFAULT_PS=y
+CONFIG_MAC80211_DEFAULT_PS_VALUE=1
+
+#
+# Rate control algorithm selection
+#
+CONFIG_MAC80211_RC_PID=y
+CONFIG_MAC80211_RC_MINSTREL=y
+CONFIG_MAC80211_RC_DEFAULT_PID=y
+# CONFIG_MAC80211_RC_DEFAULT_MINSTREL is not set
+CONFIG_MAC80211_RC_DEFAULT="pid"
+# CONFIG_MAC80211_MESH is not set
+# CONFIG_MAC80211_LEDS is not set
+# CONFIG_MAC80211_DEBUGFS is not set
+# CONFIG_MAC80211_DEBUG_MENU is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+CONFIG_MTD_CFI_INTELEXT=y
+CONFIG_MTD_CFI_AMDSTD=y
+CONFIG_MTD_CFI_STAA=y
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+CONFIG_MTD_COMPLEX_MAPPINGS=y
+CONFIG_MTD_PHYSMAP=y
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_RAM is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_93CX6 is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_IFB is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+CONFIG_FIXED_PHY=y
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+CONFIG_CPMAC=y
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+CONFIG_WLAN_80211=y
+# CONFIG_LIBERTAS is not set
+# CONFIG_LIBERTAS_THINFIRM is not set
+# CONFIG_MAC80211_HWSIM is not set
+# CONFIG_P54_COMMON is not set
+# CONFIG_HOSTAP is not set
+# CONFIG_B43 is not set
+# CONFIG_B43LEGACY is not set
+# CONFIG_RT2X00 is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+# CONFIG_WAN is not set
+CONFIG_ATM_DRIVERS=y
+# CONFIG_ATM_DUMMY is not set
+# CONFIG_ATM_TCP is not set
+CONFIG_PPP=m
+CONFIG_PPP_MULTILINK=y
+CONFIG_PPP_FILTER=y
+CONFIG_PPP_ASYNC=m
+# CONFIG_PPP_SYNC_TTY is not set
+# CONFIG_PPP_DEFLATE is not set
+# CONFIG_PPP_BSDCOMP is not set
+# CONFIG_PPP_MPPE is not set
+CONFIG_PPPOE=m
+CONFIG_PPPOATM=m
+# CONFIG_PPPOL2TP is not set
+# CONFIG_SLIP is not set
+CONFIG_SLHC=m
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+# CONFIG_INPUT is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+# CONFIG_DEVKMEM is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=2
+CONFIG_SERIAL_8250_RUNTIME_UARTS=2
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_AR7_WDT=y
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB=y
+# CONFIG_SSB_SILENT is not set
+# CONFIG_SSB_DEBUG is not set
+CONFIG_SSB_SERIAL=y
+CONFIG_SSB_DRIVER_MIPS=y
+CONFIG_SSB_EMBEDDED=y
+CONFIG_SSB_DRIVER_EXTIF=y
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_MEDIA_SUPPORT is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_SOUND is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+# CONFIG_LEDS_GPIO is not set
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
+
+#
+# iptables trigger is under Netfilter config (LED target)
+#
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
+CONFIG_VLYNQ=y
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+# CONFIG_EXT2_FS is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+# CONFIG_DNOTIFY is not set
+# CONFIG_INOTIFY is not set
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+# CONFIG_PROC_PAGE_MONITOR is not set
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+CONFIG_JFFS2_SUMMARY=y
+# CONFIG_JFFS2_FS_XATTR is not set
+CONFIG_JFFS2_COMPRESSION_OPTIONS=y
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_JFFS2_CMODE_NONE is not set
+CONFIG_JFFS2_CMODE_PRIORITY=y
+# CONFIG_JFFS2_CMODE_SIZE is not set
+# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
+# CONFIG_CRAMFS is not set
+CONFIG_SQUASHFS=y
+# CONFIG_SQUASHFS_EMBEDDED is not set
+CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+# CONFIG_NFS_FS is not set
+# CONFIG_NFSD is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_BSD_DISKLABEL=y
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+# CONFIG_NLS is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_TRACING_SUPPORT=y
+# CONFIG_FTRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_CMDLINE="rootfstype=squashfs,jffs2"
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
+CONFIG_CRYPTO_ALGAPI=m
+CONFIG_CRYPTO_ALGAPI2=m
+CONFIG_CRYPTO_AEAD2=m
+CONFIG_CRYPTO_BLKCIPHER=m
+CONFIG_CRYPTO_BLKCIPHER2=m
+CONFIG_CRYPTO_HASH2=m
+CONFIG_CRYPTO_RNG2=m
+CONFIG_CRYPTO_PCOMP=m
+CONFIG_CRYPTO_MANAGER=m
+CONFIG_CRYPTO_MANAGER2=m
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=m
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+CONFIG_CRYPTO_AES=m
+# CONFIG_CRYPTO_ANUBIS is not set
+CONFIG_CRYPTO_ARC4=m
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+# CONFIG_CRYPTO_HW is not set
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+CONFIG_CRC_CCITT=m
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_LZMA=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/mips/gt64120/wrppmc/serial.c b/arch/mips/gt64120/wrppmc/serial.c
index 5ec1c2f..6f9d085 100644
--- a/arch/mips/gt64120/wrppmc/serial.c
+++ b/arch/mips/gt64120/wrppmc/serial.c
@@ -1,7 +1,7 @@
/*
* Registration of WRPPMC UART platform device.
*
- * Copyright (C) 2007 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ * Copyright (C) 2007 Yoichi Yuasa <yuasa@linux-mips.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
diff --git a/arch/mips/include/asm/amon.h b/arch/mips/include/asm/amon.h
new file mode 100644
index 0000000..c3dc1a6
--- /dev/null
+++ b/arch/mips/include/asm/amon.h
@@ -0,0 +1,7 @@
+/*
+ * Amon support
+ */
+
+int amon_cpu_avail(int);
+void amon_cpu_start(int, unsigned long, unsigned long,
+ unsigned long, unsigned long);
diff --git a/arch/mips/include/asm/ds1287.h b/arch/mips/include/asm/ds1287.h
index ba1702e..3af0b8f 100644
--- a/arch/mips/include/asm/ds1287.h
+++ b/arch/mips/include/asm/ds1287.h
@@ -1,7 +1,7 @@
/*
* DS1287 timer functions.
*
- * Copyright (C) 2008 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ * Copyright (C) 2008 Yoichi Yuasa <yuasa@linux-mips.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
diff --git a/arch/mips/include/asm/elf.h b/arch/mips/include/asm/elf.h
index d58f128..7990694 100644
--- a/arch/mips/include/asm/elf.h
+++ b/arch/mips/include/asm/elf.h
@@ -316,9 +316,13 @@
extern int dump_task_regs(struct task_struct *, elf_gregset_t *);
extern int dump_task_fpu(struct task_struct *, elf_fpregset_t *);
+#ifndef ELF_CORE_COPY_REGS
#define ELF_CORE_COPY_REGS(elf_regs, regs) \
elf_dump_regs((elf_greg_t *)&(elf_regs), regs);
+#endif
+#ifndef ELF_CORE_COPY_TASK_REGS
#define ELF_CORE_COPY_TASK_REGS(tsk, elf_regs) dump_task_regs(tsk, elf_regs)
+#endif
#define ELF_CORE_COPY_FPREGS(tsk, elf_fpregs) \
dump_task_fpu(tsk, elf_fpregs)
diff --git a/arch/mips/include/asm/gcmpregs.h b/arch/mips/include/asm/gcmpregs.h
index d74a8a4..36fd969 100644
--- a/arch/mips/include/asm/gcmpregs.h
+++ b/arch/mips/include/asm/gcmpregs.h
@@ -114,4 +114,6 @@
#define GCMP_CCB_DINTGROUP_OFS 0x0030 /* DINT Group Participate */
#define GCMP_CCB_DBGGROUP_OFS 0x0100 /* DebugBreak Group */
+extern int __init gcmp_probe(unsigned long, unsigned long);
+
#endif /* _ASM_GCMPREGS_H */
diff --git a/arch/mips/include/asm/gic.h b/arch/mips/include/asm/gic.h
index 954807d..10292e3 100644
--- a/arch/mips/include/asm/gic.h
+++ b/arch/mips/include/asm/gic.h
@@ -20,7 +20,11 @@
#define GIC_TRIG_EDGE 1
#define GIC_TRIG_LEVEL 0
+#if CONFIG_SMP
+#define GIC_NUM_INTRS (24 + NR_CPUS * 2)
+#else
#define GIC_NUM_INTRS 32
+#endif
#define MSK(n) ((1 << (n)) - 1)
#define REG32(addr) (*(volatile unsigned int *) (addr))
@@ -483,5 +487,7 @@
extern unsigned int gic_get_int(void);
extern void gic_send_ipi(unsigned int intr);
+extern unsigned int plat_ipi_call_int_xlate(unsigned int);
+extern unsigned int plat_ipi_resched_int_xlate(unsigned int);
#endif /* _ASM_GICREGS_H */
diff --git a/arch/mips/include/asm/irq_gt641xx.h b/arch/mips/include/asm/irq_gt641xx.h
index f9a7c3a..250a240 100644
--- a/arch/mips/include/asm/irq_gt641xx.h
+++ b/arch/mips/include/asm/irq_gt641xx.h
@@ -1,7 +1,7 @@
/*
* Galileo/Marvell GT641xx IRQ definitions.
*
- * Copyright (C) 2007 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ * Copyright (C) 2007 Yoichi Yuasa <yuasa@linux-mips.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
diff --git a/arch/mips/include/asm/mach-ar7/ar7.h b/arch/mips/include/asm/mach-ar7/ar7.h
new file mode 100644
index 0000000..de71694
--- /dev/null
+++ b/arch/mips/include/asm/mach-ar7/ar7.h
@@ -0,0 +1,178 @@
+/*
+ * Copyright (C) 2006,2007 Felix Fietkau <nbd@openwrt.org>
+ * Copyright (C) 2006,2007 Eugene Konev <ejka@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#ifndef __AR7_H__
+#define __AR7_H__
+
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/errno.h>
+
+#include <asm/addrspace.h>
+
+#define AR7_SDRAM_BASE 0x14000000
+
+#define AR7_REGS_BASE 0x08610000
+
+#define AR7_REGS_MAC0 (AR7_REGS_BASE + 0x0000)
+#define AR7_REGS_GPIO (AR7_REGS_BASE + 0x0900)
+/* 0x08610A00 - 0x08610BFF (512 bytes, 128 bytes / clock) */
+#define AR7_REGS_POWER (AR7_REGS_BASE + 0x0a00)
+#define AR7_REGS_CLOCKS (AR7_REGS_POWER + 0x80)
+#define UR8_REGS_CLOCKS (AR7_REGS_POWER + 0x20)
+#define AR7_REGS_UART0 (AR7_REGS_BASE + 0x0e00)
+#define AR7_REGS_USB (AR7_REGS_BASE + 0x1200)
+#define AR7_REGS_RESET (AR7_REGS_BASE + 0x1600)
+#define AR7_REGS_VLYNQ0 (AR7_REGS_BASE + 0x1800)
+#define AR7_REGS_DCL (AR7_REGS_BASE + 0x1a00)
+#define AR7_REGS_VLYNQ1 (AR7_REGS_BASE + 0x1c00)
+#define AR7_REGS_MDIO (AR7_REGS_BASE + 0x1e00)
+#define AR7_REGS_IRQ (AR7_REGS_BASE + 0x2400)
+#define AR7_REGS_MAC1 (AR7_REGS_BASE + 0x2800)
+
+#define AR7_REGS_WDT (AR7_REGS_BASE + 0x1f00)
+#define UR8_REGS_WDT (AR7_REGS_BASE + 0x0b00)
+#define UR8_REGS_UART1 (AR7_REGS_BASE + 0x0f00)
+
+#define AR7_RESET_PEREPHERIAL 0x0
+#define AR7_RESET_SOFTWARE 0x4
+#define AR7_RESET_STATUS 0x8
+
+#define AR7_RESET_BIT_CPMAC_LO 17
+#define AR7_RESET_BIT_CPMAC_HI 21
+#define AR7_RESET_BIT_MDIO 22
+#define AR7_RESET_BIT_EPHY 26
+
+/* GPIO control registers */
+#define AR7_GPIO_INPUT 0x0
+#define AR7_GPIO_OUTPUT 0x4
+#define AR7_GPIO_DIR 0x8
+#define AR7_GPIO_ENABLE 0xc
+
+#define AR7_CHIP_7100 0x18
+#define AR7_CHIP_7200 0x2b
+#define AR7_CHIP_7300 0x05
+
+/* Interrupts */
+#define AR7_IRQ_UART0 15
+#define AR7_IRQ_UART1 16
+
+/* Clocks */
+#define AR7_AFE_CLOCK 35328000
+#define AR7_REF_CLOCK 25000000
+#define AR7_XTAL_CLOCK 24000000
+
+struct plat_cpmac_data {
+ int reset_bit;
+ int power_bit;
+ u32 phy_mask;
+ char dev_addr[6];
+};
+
+struct plat_dsl_data {
+ int reset_bit_dsl;
+ int reset_bit_sar;
+};
+
+extern int ar7_cpu_clock, ar7_bus_clock, ar7_dsp_clock;
+
+static inline u16 ar7_chip_id(void)
+{
+ return readl((void *)KSEG1ADDR(AR7_REGS_GPIO + 0x14)) & 0xffff;
+}
+
+static inline u8 ar7_chip_rev(void)
+{
+ return (readl((void *)KSEG1ADDR(AR7_REGS_GPIO + 0x14)) >> 16) & 0xff;
+}
+
+static inline int ar7_cpu_freq(void)
+{
+ return ar7_cpu_clock;
+}
+
+static inline int ar7_bus_freq(void)
+{
+ return ar7_bus_clock;
+}
+
+static inline int ar7_vbus_freq(void)
+{
+ return ar7_bus_clock / 2;
+}
+#define ar7_cpmac_freq ar7_vbus_freq
+
+static inline int ar7_dsp_freq(void)
+{
+ return ar7_dsp_clock;
+}
+
+static inline int ar7_has_high_cpmac(void)
+{
+ u16 chip_id = ar7_chip_id();
+ switch (chip_id) {
+ case AR7_CHIP_7100:
+ case AR7_CHIP_7200:
+ return 0;
+ case AR7_CHIP_7300:
+ return 1;
+ default:
+ return -ENXIO;
+ }
+}
+#define ar7_has_high_vlynq ar7_has_high_cpmac
+#define ar7_has_second_uart ar7_has_high_cpmac
+
+static inline void ar7_device_enable(u32 bit)
+{
+ void *reset_reg =
+ (void *)KSEG1ADDR(AR7_REGS_RESET + AR7_RESET_PEREPHERIAL);
+ writel(readl(reset_reg) | (1 << bit), reset_reg);
+ msleep(20);
+}
+
+static inline void ar7_device_disable(u32 bit)
+{
+ void *reset_reg =
+ (void *)KSEG1ADDR(AR7_REGS_RESET + AR7_RESET_PEREPHERIAL);
+ writel(readl(reset_reg) & ~(1 << bit), reset_reg);
+ msleep(20);
+}
+
+static inline void ar7_device_reset(u32 bit)
+{
+ ar7_device_disable(bit);
+ ar7_device_enable(bit);
+}
+
+static inline void ar7_device_on(u32 bit)
+{
+ void *power_reg = (void *)KSEG1ADDR(AR7_REGS_POWER);
+ writel(readl(power_reg) | (1 << bit), power_reg);
+ msleep(20);
+}
+
+static inline void ar7_device_off(u32 bit)
+{
+ void *power_reg = (void *)KSEG1ADDR(AR7_REGS_POWER);
+ writel(readl(power_reg) & ~(1 << bit), power_reg);
+ msleep(20);
+}
+
+#endif /* __AR7_H__ */
diff --git a/arch/mips/include/asm/mach-ar7/gpio.h b/arch/mips/include/asm/mach-ar7/gpio.h
new file mode 100644
index 0000000..cbe9c4f
--- /dev/null
+++ b/arch/mips/include/asm/mach-ar7/gpio.h
@@ -0,0 +1,110 @@
+/*
+ * Copyright (C) 2007 Florian Fainelli <florian@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#ifndef __AR7_GPIO_H__
+#define __AR7_GPIO_H__
+
+#include <asm/mach-ar7/ar7.h>
+
+#define AR7_GPIO_MAX 32
+
+extern int gpio_request(unsigned gpio, const char *label);
+extern void gpio_free(unsigned gpio);
+
+/* Common GPIO layer */
+static inline int gpio_get_value(unsigned gpio)
+{
+ void __iomem *gpio_in =
+ (void __iomem *)KSEG1ADDR(AR7_REGS_GPIO + AR7_GPIO_INPUT);
+
+ return readl(gpio_in) & (1 << gpio);
+}
+
+static inline void gpio_set_value(unsigned gpio, int value)
+{
+ void __iomem *gpio_out =
+ (void __iomem *)KSEG1ADDR(AR7_REGS_GPIO + AR7_GPIO_OUTPUT);
+ unsigned tmp;
+
+ tmp = readl(gpio_out) & ~(1 << gpio);
+ if (value)
+ tmp |= 1 << gpio;
+ writel(tmp, gpio_out);
+}
+
+static inline int gpio_direction_input(unsigned gpio)
+{
+ void __iomem *gpio_dir =
+ (void __iomem *)KSEG1ADDR(AR7_REGS_GPIO + AR7_GPIO_DIR);
+
+ if (gpio >= AR7_GPIO_MAX)
+ return -EINVAL;
+
+ writel(readl(gpio_dir) | (1 << gpio), gpio_dir);
+
+ return 0;
+}
+
+static inline int gpio_direction_output(unsigned gpio, int value)
+{
+ void __iomem *gpio_dir =
+ (void __iomem *)KSEG1ADDR(AR7_REGS_GPIO + AR7_GPIO_DIR);
+
+ if (gpio >= AR7_GPIO_MAX)
+ return -EINVAL;
+
+ gpio_set_value(gpio, value);
+ writel(readl(gpio_dir) & ~(1 << gpio), gpio_dir);
+
+ return 0;
+}
+
+static inline int gpio_to_irq(unsigned gpio)
+{
+ return -EINVAL;
+}
+
+static inline int irq_to_gpio(unsigned irq)
+{
+ return -EINVAL;
+}
+
+/* Board specific GPIO functions */
+static inline int ar7_gpio_enable(unsigned gpio)
+{
+ void __iomem *gpio_en =
+ (void __iomem *)KSEG1ADDR(AR7_REGS_GPIO + AR7_GPIO_ENABLE);
+
+ writel(readl(gpio_en) | (1 << gpio), gpio_en);
+
+ return 0;
+}
+
+static inline int ar7_gpio_disable(unsigned gpio)
+{
+ void __iomem *gpio_en =
+ (void __iomem *)KSEG1ADDR(AR7_REGS_GPIO + AR7_GPIO_ENABLE);
+
+ writel(readl(gpio_en) & ~(1 << gpio), gpio_en);
+
+ return 0;
+}
+
+#include <asm-generic/gpio.h>
+
+#endif
diff --git a/arch/mips/include/asm/mach-ar7/irq.h b/arch/mips/include/asm/mach-ar7/irq.h
new file mode 100644
index 0000000..39e9757
--- /dev/null
+++ b/arch/mips/include/asm/mach-ar7/irq.h
@@ -0,0 +1,16 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Shamelessly copied from asm-mips/mach-emma2rh/
+ * Copyright (C) 2003 by Ralf Baechle
+ */
+#ifndef __ASM_AR7_IRQ_H
+#define __ASM_AR7_IRQ_H
+
+#define NR_IRQS 256
+
+#include_next <irq.h>
+
+#endif /* __ASM_AR7_IRQ_H */
diff --git a/arch/mips/include/asm/mach-ar7/prom.h b/arch/mips/include/asm/mach-ar7/prom.h
new file mode 100644
index 0000000..088f61fe
--- /dev/null
+++ b/arch/mips/include/asm/mach-ar7/prom.h
@@ -0,0 +1,25 @@
+/*
+ * Copyright (C) 2006, 2007 Florian Fainelli <florian@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#ifndef __PROM_H__
+#define __PROM_H__
+
+extern char *prom_getenv(const char *name);
+extern void prom_meminit(void);
+
+#endif /* __PROM_H__ */
diff --git a/arch/mips/include/asm/mach-ar7/spaces.h b/arch/mips/include/asm/mach-ar7/spaces.h
new file mode 100644
index 0000000..ac28f27
--- /dev/null
+++ b/arch/mips/include/asm/mach-ar7/spaces.h
@@ -0,0 +1,22 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1994 - 1999, 2000, 03, 04 Ralf Baechle
+ * Copyright (C) 2000, 2002 Maciej W. Rozycki
+ * Copyright (C) 1990, 1999, 2000 Silicon Graphics, Inc.
+ */
+#ifndef _ASM_AR7_SPACES_H
+#define _ASM_AR7_SPACES_H
+
+/*
+ * This handles the memory map.
+ * We handle pages at KSEG0 for kernels with 32 bit address space.
+ */
+#define PAGE_OFFSET 0x94000000UL
+#define PHYS_OFFSET 0x14000000UL
+
+#include <asm/mach-generic/spaces.h>
+
+#endif /* __ASM_AR7_SPACES_H */
diff --git a/arch/mips/include/asm/mach-ar7/war.h b/arch/mips/include/asm/mach-ar7/war.h
new file mode 100644
index 0000000..f4862b5
--- /dev/null
+++ b/arch/mips/include/asm/mach-ar7/war.h
@@ -0,0 +1,25 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2002, 2004, 2007 by Ralf Baechle <ralf@linux-mips.org>
+ */
+#ifndef __ASM_MIPS_MACH_AR7_WAR_H
+#define __ASM_MIPS_MACH_AR7_WAR_H
+
+#define R4600_V1_INDEX_ICACHEOP_WAR 0
+#define R4600_V1_HIT_CACHEOP_WAR 0
+#define R4600_V2_HIT_CACHEOP_WAR 0
+#define R5432_CP0_INTERRUPT_WAR 0
+#define BCM1250_M3_WAR 0
+#define SIBYTE_1956_WAR 0
+#define MIPS4K_ICACHE_REFILL_WAR 0
+#define MIPS_CACHE_SYNC_WAR 0
+#define TX49XX_ICACHE_INDEX_INV_WAR 0
+#define RM9000_CDEX_SMP_WAR 0
+#define ICACHE_REFILLS_WORKAROUND_WAR 0
+#define R10000_LLSC_WAR 0
+#define MIPS34K_MISSED_ITLB_WAR 0
+
+#endif /* __ASM_MIPS_MACH_AR7_WAR_H */
diff --git a/arch/mips/include/asm/mach-cobalt/irq.h b/arch/mips/include/asm/mach-cobalt/irq.h
index 57c8c9a..9da9acf 100644
--- a/arch/mips/include/asm/mach-cobalt/irq.h
+++ b/arch/mips/include/asm/mach-cobalt/irq.h
@@ -8,7 +8,7 @@
* Copyright (C) 1997 Cobalt Microserver
* Copyright (C) 1997, 2003 Ralf Baechle
* Copyright (C) 2001-2003 Liam Davies (ldavies@agile.tv)
- * Copyright (C) 2007 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ * Copyright (C) 2007 Yoichi Yuasa <yuasa@linux-mips.org>
*/
#ifndef _ASM_COBALT_IRQ_H
#define _ASM_COBALT_IRQ_H
diff --git a/arch/mips/include/asm/mach-cobalt/mach-gt64120.h b/arch/mips/include/asm/mach-cobalt/mach-gt64120.h
index ae9c552..f8afec3 100644
--- a/arch/mips/include/asm/mach-cobalt/mach-gt64120.h
+++ b/arch/mips/include/asm/mach-cobalt/mach-gt64120.h
@@ -1,5 +1,5 @@
/*
- * Copyright (C) 2006 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ * Copyright (C) 2006 Yoichi Yuasa <yuasa@linux-mips.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
diff --git a/arch/mips/include/asm/octeon/pci-octeon.h b/arch/mips/include/asm/octeon/pci-octeon.h
new file mode 100644
index 0000000..6ac5d3e
--- /dev/null
+++ b/arch/mips/include/asm/octeon/pci-octeon.h
@@ -0,0 +1,45 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2005-2009 Cavium Networks
+ */
+
+#ifndef __PCI_OCTEON_H__
+#define __PCI_OCTEON_H__
+
+#include <linux/pci.h>
+
+/* Some PCI cards require delays when accessing config space. */
+#define PCI_CONFIG_SPACE_DELAY 10000
+
+/*
+ * pcibios_map_irq() is defined inside pci-octeon.c. All it does is
+ * call the Octeon specific version pointed to by this variable. This
+ * function needs to change for PCI or PCIe based hosts.
+ */
+extern int (*octeon_pcibios_map_irq)(const struct pci_dev *dev,
+ u8 slot, u8 pin);
+
+/*
+ * The following defines are used when octeon_dma_bar_type =
+ * OCTEON_DMA_BAR_TYPE_BIG
+ */
+#define OCTEON_PCI_BAR1_HOLE_BITS 5
+#define OCTEON_PCI_BAR1_HOLE_SIZE (1ul<<(OCTEON_PCI_BAR1_HOLE_BITS+3))
+
+enum octeon_dma_bar_type {
+ OCTEON_DMA_BAR_TYPE_INVALID,
+ OCTEON_DMA_BAR_TYPE_SMALL,
+ OCTEON_DMA_BAR_TYPE_BIG,
+ OCTEON_DMA_BAR_TYPE_PCIE
+};
+
+/*
+ * This tells the DMA mapping system in dma-octeon.c how to map PCI
+ * DMA addresses.
+ */
+extern enum octeon_dma_bar_type octeon_dma_bar_type;
+
+#endif
diff --git a/arch/mips/include/asm/page.h b/arch/mips/include/asm/page.h
index dc0eaa7..96a14a4 100644
--- a/arch/mips/include/asm/page.h
+++ b/arch/mips/include/asm/page.h
@@ -165,7 +165,14 @@
#ifdef CONFIG_FLATMEM
-#define pfn_valid(pfn) ((pfn) >= ARCH_PFN_OFFSET && (pfn) < max_mapnr)
+#define pfn_valid(pfn) \
+({ \
+ unsigned long __pfn = (pfn); \
+ /* avoid <linux/bootmem.h> include hell */ \
+ extern unsigned long min_low_pfn; \
+ \
+ __pfn >= min_low_pfn && __pfn < max_mapnr; \
+})
#elif defined(CONFIG_SPARSEMEM)
diff --git a/arch/mips/include/asm/reg.h b/arch/mips/include/asm/reg.h
index 634b55d..910e71a 100644
--- a/arch/mips/include/asm/reg.h
+++ b/arch/mips/include/asm/reg.h
@@ -69,7 +69,7 @@
#endif
-#ifdef CONFIG_64BIT
+#if defined(CONFIG_64BIT) && !defined(WANT_COMPAT_REG_H)
#define EF_R0 0
#define EF_R1 1
diff --git a/arch/mips/include/asm/swab.h b/arch/mips/include/asm/swab.h
index 99993c0..97c2f81 100644
--- a/arch/mips/include/asm/swab.h
+++ b/arch/mips/include/asm/swab.h
@@ -38,7 +38,11 @@
}
#define __arch_swab32 __arch_swab32
-#ifdef CONFIG_CPU_MIPS64_R2
+/*
+ * Having already checked for CONFIG_CPU_MIPSR2, enable the
+ * optimized version for 64-bit kernel on r2 CPUs.
+ */
+#ifdef CONFIG_64BIT
static inline __attribute_const__ __u64 __arch_swab64(__u64 x)
{
__asm__(
@@ -50,6 +54,6 @@
return x;
}
#define __arch_swab64 __arch_swab64
-#endif /* CONFIG_CPU_MIPS64_R2 */
+#endif /* CONFIG_64BIT */
#endif /* CONFIG_CPU_MIPSR2 */
#endif /* _ASM_SWAB_H */
diff --git a/arch/mips/include/asm/thread_info.h b/arch/mips/include/asm/thread_info.h
index 143a481..f9df720 100644
--- a/arch/mips/include/asm/thread_info.h
+++ b/arch/mips/include/asm/thread_info.h
@@ -39,8 +39,6 @@
/*
* macros/functions for gaining access to the thread information structure
- *
- * preempt_count needs to be 1 initially, until the scheduler is functional.
*/
#define INIT_THREAD_INFO(tsk) \
{ \
@@ -48,7 +46,7 @@
.exec_domain = &default_exec_domain, \
.flags = _TIF_FIXADE, \
.cpu = 0, \
- .preempt_count = 1, \
+ .preempt_count = INIT_PREEMPT_COUNT, \
.addr_limit = KERNEL_DS, \
.restart_block = { \
.fn = do_no_restart_syscall, \
diff --git a/arch/mips/include/asm/unistd.h b/arch/mips/include/asm/unistd.h
index 4000501..b70c49f 100644
--- a/arch/mips/include/asm/unistd.h
+++ b/arch/mips/include/asm/unistd.h
@@ -352,16 +352,18 @@
#define __NR_inotify_init1 (__NR_Linux + 329)
#define __NR_preadv (__NR_Linux + 330)
#define __NR_pwritev (__NR_Linux + 331)
+#define __NR_rt_tgsigqueueinfo (__NR_Linux + 332)
+#define __NR_perf_counter_open (__NR_Linux + 333)
/*
* Offset of the last Linux o32 flavoured syscall
*/
-#define __NR_Linux_syscalls 331
+#define __NR_Linux_syscalls 333
#endif /* _MIPS_SIM == _MIPS_SIM_ABI32 */
#define __NR_O32_Linux 4000
-#define __NR_O32_Linux_syscalls 331
+#define __NR_O32_Linux_syscalls 333
#if _MIPS_SIM == _MIPS_SIM_ABI64
@@ -660,16 +662,18 @@
#define __NR_inotify_init1 (__NR_Linux + 288)
#define __NR_preadv (__NR_Linux + 289)
#define __NR_pwritev (__NR_Linux + 290)
+#define __NR_rt_tgsigqueueinfo (__NR_Linux + 291)
+#define __NR_perf_counter_open (__NR_Linux + 292)
/*
* Offset of the last Linux 64-bit flavoured syscall
*/
-#define __NR_Linux_syscalls 290
+#define __NR_Linux_syscalls 292
#endif /* _MIPS_SIM == _MIPS_SIM_ABI64 */
#define __NR_64_Linux 5000
-#define __NR_64_Linux_syscalls 290
+#define __NR_64_Linux_syscalls 292
#if _MIPS_SIM == _MIPS_SIM_NABI32
@@ -972,16 +976,18 @@
#define __NR_inotify_init1 (__NR_Linux + 292)
#define __NR_preadv (__NR_Linux + 293)
#define __NR_pwritev (__NR_Linux + 294)
+#define __NR_rt_tgsigqueueinfo (__NR_Linux + 295)
+#define __NR_perf_counter_open (__NR_Linux + 296)
/*
* Offset of the last N32 flavoured syscall
*/
-#define __NR_Linux_syscalls 294
+#define __NR_Linux_syscalls 296
#endif /* _MIPS_SIM == _MIPS_SIM_NABI32 */
#define __NR_N32_Linux 6000
-#define __NR_N32_Linux_syscalls 294
+#define __NR_N32_Linux_syscalls 296
#ifdef __KERNEL__
diff --git a/arch/mips/include/asm/vr41xx/capcella.h b/arch/mips/include/asm/vr41xx/capcella.h
index e0ee05a..fcc6569 100644
--- a/arch/mips/include/asm/vr41xx/capcella.h
+++ b/arch/mips/include/asm/vr41xx/capcella.h
@@ -1,7 +1,7 @@
/*
* capcella.h, Include file for ZAO Networks Capcella.
*
- * Copyright (C) 2002-2004 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ * Copyright (C) 2002-2004 Yoichi Yuasa <yuasa@linux-mips.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
diff --git a/arch/mips/include/asm/vr41xx/giu.h b/arch/mips/include/asm/vr41xx/giu.h
index 0bcdd3a..6a90bc1 100644
--- a/arch/mips/include/asm/vr41xx/giu.h
+++ b/arch/mips/include/asm/vr41xx/giu.h
@@ -1,7 +1,7 @@
/*
* Include file for NEC VR4100 series General-purpose I/O Unit.
*
- * Copyright (C) 2005 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ * Copyright (C) 2005-2009 Yoichi Yuasa <yuasa@linux-mips.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -41,7 +41,8 @@
IRQ_SIGNAL_HOLD,
} irq_signal_t;
-extern void vr41xx_set_irq_trigger(unsigned int pin, irq_trigger_t trigger, irq_signal_t signal);
+extern void vr41xx_set_irq_trigger(unsigned int pin, irq_trigger_t trigger,
+ irq_signal_t signal);
typedef enum {
IRQ_LEVEL_LOW,
@@ -51,23 +52,6 @@
extern void vr41xx_set_irq_level(unsigned int pin, irq_level_t level);
typedef enum {
- GPIO_DATA_LOW,
- GPIO_DATA_HIGH,
- GPIO_DATA_INVAL,
-} gpio_data_t;
-
-extern gpio_data_t vr41xx_gpio_get_pin(unsigned int pin);
-extern int vr41xx_gpio_set_pin(unsigned int pin, gpio_data_t data);
-
-typedef enum {
- GPIO_INPUT,
- GPIO_OUTPUT,
- GPIO_OUTPUT_DISABLE,
-} gpio_direction_t;
-
-extern int vr41xx_gpio_set_direction(unsigned int pin, gpio_direction_t dir);
-
-typedef enum {
GPIO_PULL_DOWN,
GPIO_PULL_UP,
GPIO_PULL_DISABLE,
diff --git a/arch/mips/include/asm/vr41xx/irq.h b/arch/mips/include/asm/vr41xx/irq.h
index d315dfb..b07f732 100644
--- a/arch/mips/include/asm/vr41xx/irq.h
+++ b/arch/mips/include/asm/vr41xx/irq.h
@@ -7,7 +7,7 @@
* Copyright (C) 2001, 2002 Paul Mundt
* Copyright (C) 2002 MontaVista Software, Inc.
* Copyright (C) 2002 TimeSys Corp.
- * Copyright (C) 2003-2006 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ * Copyright (C) 2003-2006 Yoichi Yuasa <yuasa@linux-mips.org>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
diff --git a/arch/mips/include/asm/vr41xx/mpc30x.h b/arch/mips/include/asm/vr41xx/mpc30x.h
index 1d67df8..130d09d 100644
--- a/arch/mips/include/asm/vr41xx/mpc30x.h
+++ b/arch/mips/include/asm/vr41xx/mpc30x.h
@@ -1,7 +1,7 @@
/*
* mpc30x.h, Include file for Victor MP-C303/304.
*
- * Copyright (C) 2002-2004 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ * Copyright (C) 2002-2004 Yoichi Yuasa <yuasa@linux-mips.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
diff --git a/arch/mips/include/asm/vr41xx/pci.h b/arch/mips/include/asm/vr41xx/pci.h
index 6fc01ce..c231a3d 100644
--- a/arch/mips/include/asm/vr41xx/pci.h
+++ b/arch/mips/include/asm/vr41xx/pci.h
@@ -1,7 +1,7 @@
/*
* Include file for NEC VR4100 series PCI Control Unit.
*
- * Copyright (C) 2004-2005 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ * Copyright (C) 2004-2005 Yoichi Yuasa <yuasa@linux-mips.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
diff --git a/arch/mips/include/asm/vr41xx/siu.h b/arch/mips/include/asm/vr41xx/siu.h
index da9f6e3..ca806bc 100644
--- a/arch/mips/include/asm/vr41xx/siu.h
+++ b/arch/mips/include/asm/vr41xx/siu.h
@@ -1,7 +1,7 @@
/*
* Include file for NEC VR4100 series Serial Interface Unit.
*
- * Copyright (C) 2005-2008 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ * Copyright (C) 2005-2008 Yoichi Yuasa <yuasa@linux-mips.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
diff --git a/arch/mips/include/asm/vr41xx/tb0219.h b/arch/mips/include/asm/vr41xx/tb0219.h
index dc981b4..c78e824 100644
--- a/arch/mips/include/asm/vr41xx/tb0219.h
+++ b/arch/mips/include/asm/vr41xx/tb0219.h
@@ -1,7 +1,7 @@
/*
* tb0219.h, Include file for TANBAC TB0219.
*
- * Copyright (C) 2002-2004 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ * Copyright (C) 2002-2004 Yoichi Yuasa <yuasa@linux-mips.org>
*
* Modified for TANBAC TB0219:
* Copyright (C) 2003 Megasolution Inc. <matsu@megasolution.jp>
diff --git a/arch/mips/include/asm/vr41xx/tb0226.h b/arch/mips/include/asm/vr41xx/tb0226.h
index de527dc..36f5f79 100644
--- a/arch/mips/include/asm/vr41xx/tb0226.h
+++ b/arch/mips/include/asm/vr41xx/tb0226.h
@@ -1,7 +1,7 @@
/*
* tb0226.h, Include file for TANBAC TB0226.
*
- * Copyright (C) 2002-2004 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ * Copyright (C) 2002-2004 Yoichi Yuasa <yuasa@linux-mips.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
diff --git a/arch/mips/include/asm/vr41xx/vr41xx.h b/arch/mips/include/asm/vr41xx/vr41xx.h
index 22be649..7b96a43 100644
--- a/arch/mips/include/asm/vr41xx/vr41xx.h
+++ b/arch/mips/include/asm/vr41xx/vr41xx.h
@@ -7,7 +7,7 @@
* Copyright (C) 2001, 2002 Paul Mundt
* Copyright (C) 2002 MontaVista Software, Inc.
* Copyright (C) 2002 TimeSys Corp.
- * Copyright (C) 2003-2008 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ * Copyright (C) 2003-2008 Yoichi Yuasa <yuasa@linux-mips.org>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
diff --git a/arch/mips/kernel/binfmt_elfo32.c b/arch/mips/kernel/binfmt_elfo32.c
index e1333d7..ff44823 100644
--- a/arch/mips/kernel/binfmt_elfo32.c
+++ b/arch/mips/kernel/binfmt_elfo32.c
@@ -53,6 +53,23 @@
#define ELF_ET_DYN_BASE (TASK32_SIZE / 3 * 2)
#include <asm/processor.h>
+
+/*
+ * When this file is selected, we are definitely running a 64bit kernel.
+ * So using the right regs define in asm/reg.h
+ */
+#define WANT_COMPAT_REG_H
+
+/* These MUST be defined before elf.h gets included */
+extern void elf32_core_copy_regs(elf_gregset_t grp, struct pt_regs *regs);
+#define ELF_CORE_COPY_REGS(_dest, _regs) elf32_core_copy_regs(_dest, _regs);
+#define ELF_CORE_COPY_TASK_REGS(_tsk, _dest) \
+({ \
+ int __res = 1; \
+ elf32_core_copy_regs(*(_dest), task_pt_regs(_tsk)); \
+ __res; \
+})
+
#include <linux/module.h>
#include <linux/elfcore.h>
#include <linux/compat.h>
@@ -110,9 +127,6 @@
value->tv_usec = rem / NSEC_PER_USEC;
}
-#undef ELF_CORE_COPY_REGS
-#define ELF_CORE_COPY_REGS(_dest, _regs) elf32_core_copy_regs(_dest, _regs);
-
void elf32_core_copy_regs(elf_gregset_t grp, struct pt_regs *regs)
{
int i;
diff --git a/arch/mips/kernel/cevt-ds1287.c b/arch/mips/kernel/cevt-ds1287.c
index 1ada45e..6996da4 100644
--- a/arch/mips/kernel/cevt-ds1287.c
+++ b/arch/mips/kernel/cevt-ds1287.c
@@ -1,7 +1,7 @@
/*
* DS1287 clockevent driver
*
- * Copyright (C) 2008 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ * Copyright (C) 2008 Yoichi Yuasa <yuasa@linux-mips.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
diff --git a/arch/mips/kernel/cevt-gt641xx.c b/arch/mips/kernel/cevt-gt641xx.c
index e9b787f..92351e0 100644
--- a/arch/mips/kernel/cevt-gt641xx.c
+++ b/arch/mips/kernel/cevt-gt641xx.c
@@ -1,7 +1,7 @@
/*
* GT641xx clockevent routines.
*
- * Copyright (C) 2007 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ * Copyright (C) 2007 Yoichi Yuasa <yuasa@linux-mips.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
diff --git a/arch/mips/kernel/csrc-ioasic.c b/arch/mips/kernel/csrc-ioasic.c
index b551f48..23da108 100644
--- a/arch/mips/kernel/csrc-ioasic.c
+++ b/arch/mips/kernel/csrc-ioasic.c
@@ -1,7 +1,7 @@
/*
* DEC I/O ASIC's counter clocksource
*
- * Copyright (C) 2008 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ * Copyright (C) 2008 Yoichi Yuasa <yuasa@linux-mips.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
diff --git a/arch/mips/kernel/irq-gic.c b/arch/mips/kernel/irq-gic.c
index 39000f1..d2072cd 100644
--- a/arch/mips/kernel/irq-gic.c
+++ b/arch/mips/kernel/irq-gic.c
@@ -107,9 +107,7 @@
{
pr_debug("CPU%d: %s: irq%d\n", smp_processor_id(), __func__, irq);
irq -= _irqbase;
- /* FIXME: this is wrong for !GICISWORDLITTLEENDIAN */
- GICWRITE(GIC_REG_ADDR(SHARED, (GIC_SH_SMASK_31_0_OFS + (irq / 32))),
- 1 << (irq % 32));
+ GIC_SET_INTR_MASK(irq, 1);
return 0;
}
@@ -120,8 +118,7 @@
#endif
pr_debug("CPU%d: %s: irq%d\n", smp_processor_id(), __func__, irq);
irq -= _irqbase;
- GICWRITE(GIC_REG_ADDR(SHARED, (GIC_SH_RMASK_31_0_OFS + (irq / 32))),
- 1 << (irq % 32));
+ GIC_CLR_INTR_MASK(irq, 1);
if (_intrmap[irq].trigtype == GIC_TRIG_EDGE) {
if (!gic_wedgeb2bok)
@@ -138,18 +135,14 @@
{
pr_debug("CPU%d: %s: irq%d\n", smp_processor_id(), __func__, irq);
irq -= _irqbase;
- /* FIXME: this is wrong for !GICISWORDLITTLEENDIAN */
- GICWRITE(GIC_REG_ADDR(SHARED, (GIC_SH_RMASK_31_0_OFS + (irq / 32))),
- 1 << (irq % 32));
+ GIC_CLR_INTR_MASK(irq, 1);
}
static void gic_unmask_irq(unsigned int irq)
{
pr_debug("CPU%d: %s: irq%d\n", smp_processor_id(), __func__, irq);
irq -= _irqbase;
- /* FIXME: this is wrong for !GICISWORDLITTLEENDIAN */
- GICWRITE(GIC_REG_ADDR(SHARED, (GIC_SH_SMASK_31_0_OFS + (irq / 32))),
- 1 << (irq % 32));
+ GIC_SET_INTR_MASK(irq, 1);
}
#ifdef CONFIG_SMP
@@ -254,6 +247,10 @@
if (cpu == X)
continue;
+ if (cpu == 0 && i != 0 && _intrmap[i].intrnum == 0 &&
+ _intrmap[i].ipiflag == 0)
+ continue;
+
setup_intr(_intrmap[i].intrnum,
_intrmap[i].cpunum,
_intrmap[i].pin,
diff --git a/arch/mips/kernel/irq-gt641xx.c b/arch/mips/kernel/irq-gt641xx.c
index 1b81b13..ebcc5f7 100644
--- a/arch/mips/kernel/irq-gt641xx.c
+++ b/arch/mips/kernel/irq-gt641xx.c
@@ -1,7 +1,7 @@
/*
* GT641xx IRQ routines.
*
- * Copyright (C) 2007 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ * Copyright (C) 2007 Yoichi Yuasa <yuasa@linux-mips.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
diff --git a/arch/mips/kernel/ptrace32.c b/arch/mips/kernel/ptrace32.c
index c4f9ac1..32644b4 100644
--- a/arch/mips/kernel/ptrace32.c
+++ b/arch/mips/kernel/ptrace32.c
@@ -22,7 +22,6 @@
#include <linux/errno.h>
#include <linux/ptrace.h>
#include <linux/smp.h>
-#include <linux/smp_lock.h>
#include <linux/user.h>
#include <linux/security.h>
diff --git a/arch/mips/kernel/scall32-o32.S b/arch/mips/kernel/scall32-o32.S
index 0b31b9b..20a86e0 100644
--- a/arch/mips/kernel/scall32-o32.S
+++ b/arch/mips/kernel/scall32-o32.S
@@ -652,6 +652,8 @@
sys sys_inotify_init1 1
sys sys_preadv 6 /* 4330 */
sys sys_pwritev 6
+ sys sys_rt_tgsigqueueinfo 4
+ sys sys_perf_counter_open 5
.endm
/* We pre-compute the number of _instruction_ bytes needed to
diff --git a/arch/mips/kernel/scall64-64.S b/arch/mips/kernel/scall64-64.S
index c647fd6..b046130 100644
--- a/arch/mips/kernel/scall64-64.S
+++ b/arch/mips/kernel/scall64-64.S
@@ -489,4 +489,6 @@
PTR sys_inotify_init1
PTR sys_preadv
PTR sys_pwritev /* 5390 */
+ PTR sys_rt_tgsigqueueinfo
+ PTR sys_perf_counter_open
.size sys_call_table,.-sys_call_table
diff --git a/arch/mips/kernel/scall64-n32.S b/arch/mips/kernel/scall64-n32.S
index 93cc672..15874f9 100644
--- a/arch/mips/kernel/scall64-n32.S
+++ b/arch/mips/kernel/scall64-n32.S
@@ -415,4 +415,6 @@
PTR sys_inotify_init1
PTR sys_preadv
PTR sys_pwritev
+ PTR compat_sys_rt_tgsigqueueinfo /* 5295 */
+ PTR sys_perf_counter_open
.size sysn32_call_table,.-sysn32_call_table
diff --git a/arch/mips/kernel/scall64-o32.S b/arch/mips/kernel/scall64-o32.S
index a5598b2..781e0f1 100644
--- a/arch/mips/kernel/scall64-o32.S
+++ b/arch/mips/kernel/scall64-o32.S
@@ -535,4 +535,6 @@
PTR sys_inotify_init1
PTR compat_sys_preadv /* 4330 */
PTR compat_sys_pwritev
+ PTR compat_sys_rt_tgsigqueueinfo
+ PTR sys_perf_counter_open
.size sys_call_table,.-sys_call_table
diff --git a/arch/mips/kernel/smp-cmp.c b/arch/mips/kernel/smp-cmp.c
index 653be06..ad0ff5d 100644
--- a/arch/mips/kernel/smp-cmp.c
+++ b/arch/mips/kernel/smp-cmp.c
@@ -37,80 +37,24 @@
#include <asm/mipsregs.h>
#include <asm/mipsmtregs.h>
#include <asm/mips_mt.h>
-
-/*
- * Crude manipulation of the CPU masks to control which
- * which CPU's are brought online during initialisation
- *
- * Beware... this needs to be called after CPU discovery
- * but before CPU bringup
- */
-static int __init allowcpus(char *str)
-{
- cpumask_t cpu_allow_map;
- char buf[256];
- int len;
-
- cpus_clear(cpu_allow_map);
- if (cpulist_parse(str, &cpu_allow_map) == 0) {
- cpu_set(0, cpu_allow_map);
- cpus_and(cpu_possible_map, cpu_possible_map, cpu_allow_map);
- len = cpulist_scnprintf(buf, sizeof(buf)-1, &cpu_possible_map);
- buf[len] = '\0';
- pr_debug("Allowable CPUs: %s\n", buf);
- return 1;
- } else
- return 0;
-}
-__setup("allowcpus=", allowcpus);
+#include <asm/amon.h>
+#include <asm/gic.h>
static void ipi_call_function(unsigned int cpu)
{
- unsigned int action = 0;
-
pr_debug("CPU%d: %s cpu %d status %08x\n",
smp_processor_id(), __func__, cpu, read_c0_status());
- switch (cpu) {
- case 0:
- action = GIC_IPI_EXT_INTR_CALLFNC_VPE0;
- break;
- case 1:
- action = GIC_IPI_EXT_INTR_CALLFNC_VPE1;
- break;
- case 2:
- action = GIC_IPI_EXT_INTR_CALLFNC_VPE2;
- break;
- case 3:
- action = GIC_IPI_EXT_INTR_CALLFNC_VPE3;
- break;
- }
- gic_send_ipi(action);
+ gic_send_ipi(plat_ipi_call_int_xlate(cpu));
}
static void ipi_resched(unsigned int cpu)
{
- unsigned int action = 0;
-
pr_debug("CPU%d: %s cpu %d status %08x\n",
smp_processor_id(), __func__, cpu, read_c0_status());
- switch (cpu) {
- case 0:
- action = GIC_IPI_EXT_INTR_RESCHED_VPE0;
- break;
- case 1:
- action = GIC_IPI_EXT_INTR_RESCHED_VPE1;
- break;
- case 2:
- action = GIC_IPI_EXT_INTR_RESCHED_VPE2;
- break;
- case 3:
- action = GIC_IPI_EXT_INTR_RESCHED_VPE3;
- break;
- }
- gic_send_ipi(action);
+ gic_send_ipi(plat_ipi_resched_int_xlate(cpu));
}
/*
@@ -206,7 +150,7 @@
(unsigned long)(gp + sizeof(struct thread_info)));
#endif
- amon_cpu_start(cpu, pc, sp, gp, a0);
+ amon_cpu_start(cpu, pc, sp, (unsigned long)gp, a0);
}
/*
diff --git a/arch/mips/kernel/sync-r4k.c b/arch/mips/kernel/sync-r4k.c
index 9021108..05dd170 100644
--- a/arch/mips/kernel/sync-r4k.c
+++ b/arch/mips/kernel/sync-r4k.c
@@ -1,7 +1,7 @@
/*
* Count register synchronisation.
*
- * All CPUs will have their count registers synchronised to the CPU0 expirelo
+ * All CPUs will have their count registers synchronised to the CPU0 next time
* value. This can cause a small timewarp for CPU0. All other CPU's should
* not have done anything significant (but they may have had interrupts
* enabled briefly - prom_smp_finish() should not be responsible for enabling
@@ -13,21 +13,22 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/irqflags.h>
-#include <linux/r4k-timer.h>
+#include <linux/cpumask.h>
+#include <asm/r4k-timer.h>
#include <asm/atomic.h>
#include <asm/barrier.h>
-#include <asm/cpumask.h>
#include <asm/mipsregs.h>
-static atomic_t __initdata count_start_flag = ATOMIC_INIT(0);
-static atomic_t __initdata count_count_start = ATOMIC_INIT(0);
-static atomic_t __initdata count_count_stop = ATOMIC_INIT(0);
+static atomic_t __cpuinitdata count_start_flag = ATOMIC_INIT(0);
+static atomic_t __cpuinitdata count_count_start = ATOMIC_INIT(0);
+static atomic_t __cpuinitdata count_count_stop = ATOMIC_INIT(0);
+static atomic_t __cpuinitdata count_reference = ATOMIC_INIT(0);
#define COUNTON 100
#define NR_LOOPS 5
-void __init synchronise_count_master(void)
+void __cpuinit synchronise_count_master(void)
{
int i;
unsigned long flags;
@@ -42,19 +43,20 @@
return;
#endif
- pr_info("Checking COUNT synchronization across %u CPUs: ",
- num_online_cpus());
+ printk(KERN_INFO "Synchronize counters across %u CPUs: ",
+ num_online_cpus());
local_irq_save(flags);
/*
* Notify the slaves that it's time to start
*/
+ atomic_set(&count_reference, read_c0_count());
atomic_set(&count_start_flag, 1);
smp_wmb();
- /* Count will be initialised to expirelo for all CPU's */
- initcount = expirelo;
+ /* Count will be initialised to current timer for all CPU's */
+ initcount = read_c0_count();
/*
* We loop a few times to get a primed instruction cache,
@@ -106,7 +108,7 @@
printk("done.\n");
}
-void __init synchronise_count_slave(void)
+void __cpuinit synchronise_count_slave(void)
{
int i;
unsigned long flags;
@@ -131,8 +133,8 @@
while (!atomic_read(&count_start_flag))
mb();
- /* Count will be initialised to expirelo for all CPU's */
- initcount = expirelo;
+ /* Count will be initialised to next expire for all CPU's */
+ initcount = atomic_read(&count_reference);
ncpus = num_online_cpus();
for (i = 0; i < NR_LOOPS; i++) {
@@ -156,4 +158,3 @@
local_irq_restore(flags);
}
#undef NR_LOOPS
-#endif
diff --git a/arch/mips/kernel/vpe.c b/arch/mips/kernel/vpe.c
index 3ca5f42..07b9ec2 100644
--- a/arch/mips/kernel/vpe.c
+++ b/arch/mips/kernel/vpe.c
@@ -1387,7 +1387,7 @@
return len;
out_einval:
- return -EINVAL;;
+ return -EINVAL;
}
static struct device_attribute vpe_class_attributes[] = {
diff --git a/arch/mips/mm/hugetlbpage.c b/arch/mips/mm/hugetlbpage.c
index 471c09a..8c2834f 100644
--- a/arch/mips/mm/hugetlbpage.c
+++ b/arch/mips/mm/hugetlbpage.c
@@ -16,7 +16,6 @@
#include <linux/mm.h>
#include <linux/hugetlb.h>
#include <linux/pagemap.h>
-#include <linux/smp_lock.h>
#include <linux/slab.h>
#include <linux/err.h>
#include <linux/sysctl.h>
diff --git a/arch/mips/mti-malta/malta-init.c b/arch/mips/mti-malta/malta-init.c
index 475038a..27c807b6 100644
--- a/arch/mips/mti-malta/malta-init.c
+++ b/arch/mips/mti-malta/malta-init.c
@@ -30,6 +30,7 @@
#include <asm/cacheflush.h>
#include <asm/traps.h>
+#include <asm/gcmpregs.h>
#include <asm/mips-boards/prom.h>
#include <asm/mips-boards/generic.h>
#include <asm/mips-boards/bonito64.h>
@@ -192,6 +193,8 @@
void __init prom_init(void)
{
+ int result;
+
prom_argc = fw_arg0;
_prom_argv = (int *) fw_arg1;
_prom_envp = (int *) fw_arg2;
@@ -358,12 +361,21 @@
#ifdef CONFIG_SERIAL_8250_CONSOLE
console_config();
#endif
+ /* Early detection of CMP support */
+ result = gcmp_probe(GCMP_BASE_ADDR, GCMP_ADDRSPACE_SZ);
+
#ifdef CONFIG_MIPS_CMP
- register_smp_ops(&cmp_smp_ops);
+ if (result)
+ register_smp_ops(&cmp_smp_ops);
#endif
#ifdef CONFIG_MIPS_MT_SMP
+#ifdef CONFIG_MIPS_CMP
+ if (!result)
+ register_smp_ops(&vsmp_smp_ops);
+#else
register_smp_ops(&vsmp_smp_ops);
#endif
+#endif
#ifdef CONFIG_MIPS_MT_SMTC
register_smp_ops(&msmtc_smp_ops);
#endif
diff --git a/arch/mips/mti-malta/malta-int.c b/arch/mips/mti-malta/malta-int.c
index b4eaf13..a8756f8 100644
--- a/arch/mips/mti-malta/malta-int.c
+++ b/arch/mips/mti-malta/malta-int.c
@@ -331,6 +331,21 @@
.flags = IRQF_DISABLED|IRQF_PERCPU,
.name = "IPI_call"
};
+
+static int gic_resched_int_base;
+static int gic_call_int_base;
+#define GIC_RESCHED_INT(cpu) (gic_resched_int_base+(cpu))
+#define GIC_CALL_INT(cpu) (gic_call_int_base+(cpu))
+
+unsigned int plat_ipi_call_int_xlate(unsigned int cpu)
+{
+ return GIC_CALL_INT(cpu);
+}
+
+unsigned int plat_ipi_resched_int_xlate(unsigned int cpu)
+{
+ return GIC_RESCHED_INT(cpu);
+}
#endif /* CONFIG_MIPS_MT_SMP */
static struct irqaction i8259irq = {
@@ -370,7 +385,7 @@
* Interrupts and CPUs/Core Interrupts. The nature of the External
* Interrupts is also defined here - polarity/trigger.
*/
-static struct gic_intr_map gic_intr_map[] = {
+static struct gic_intr_map gic_intr_map[GIC_NUM_INTRS] = {
{ GIC_EXT_INTR(0), X, X, X, X, 0 },
{ GIC_EXT_INTR(1), X, X, X, X, 0 },
{ GIC_EXT_INTR(2), X, X, X, X, 0 },
@@ -387,21 +402,14 @@
{ GIC_EXT_INTR(13), 0, GIC_MAP_TO_NMI_MSK, GIC_POL_POS, GIC_TRIG_LEVEL, 0 },
{ GIC_EXT_INTR(14), 0, GIC_MAP_TO_NMI_MSK, GIC_POL_POS, GIC_TRIG_LEVEL, 0 },
{ GIC_EXT_INTR(15), X, X, X, X, 0 },
- { GIC_EXT_INTR(16), 0, GIC_CPU_INT1, GIC_POL_POS, GIC_TRIG_EDGE, 1 },
- { GIC_EXT_INTR(17), 0, GIC_CPU_INT2, GIC_POL_POS, GIC_TRIG_EDGE, 1 },
- { GIC_EXT_INTR(18), 1, GIC_CPU_INT1, GIC_POL_POS, GIC_TRIG_EDGE, 1 },
- { GIC_EXT_INTR(19), 1, GIC_CPU_INT2, GIC_POL_POS, GIC_TRIG_EDGE, 1 },
- { GIC_EXT_INTR(20), 2, GIC_CPU_INT1, GIC_POL_POS, GIC_TRIG_EDGE, 1 },
- { GIC_EXT_INTR(21), 2, GIC_CPU_INT2, GIC_POL_POS, GIC_TRIG_EDGE, 1 },
- { GIC_EXT_INTR(22), 3, GIC_CPU_INT1, GIC_POL_POS, GIC_TRIG_EDGE, 1 },
- { GIC_EXT_INTR(23), 3, GIC_CPU_INT2, GIC_POL_POS, GIC_TRIG_EDGE, 1 },
+/* This is the end of the general interrupts now we do IPI ones */
};
#endif
/*
* GCMP needs to be detected before any SMP initialisation
*/
-static int __init gcmp_probe(unsigned long addr, unsigned long size)
+int __init gcmp_probe(unsigned long addr, unsigned long size)
{
if (gcmp_present >= 0)
return gcmp_present;
@@ -416,28 +424,36 @@
}
#if defined(CONFIG_MIPS_MT_SMP)
+static void __init fill_ipi_map1(int baseintr, int cpu, int cpupin)
+{
+ int intr = baseintr + cpu;
+ gic_intr_map[intr].intrnum = GIC_EXT_INTR(intr);
+ gic_intr_map[intr].cpunum = cpu;
+ gic_intr_map[intr].pin = cpupin;
+ gic_intr_map[intr].polarity = GIC_POL_POS;
+ gic_intr_map[intr].trigtype = GIC_TRIG_EDGE;
+ gic_intr_map[intr].ipiflag = 1;
+ ipi_map[cpu] |= (1 << (cpupin + 2));
+}
+
static void __init fill_ipi_map(void)
{
- int i;
+ int cpu;
- for (i = 0; i < ARRAY_SIZE(gic_intr_map); i++) {
- if (gic_intr_map[i].ipiflag && (gic_intr_map[i].cpunum != X))
- ipi_map[gic_intr_map[i].cpunum] |=
- (1 << (gic_intr_map[i].pin + 2));
+ for (cpu = 0; cpu < NR_CPUS; cpu++) {
+ fill_ipi_map1(gic_resched_int_base, cpu, GIC_CPU_INT1);
+ fill_ipi_map1(gic_call_int_base, cpu, GIC_CPU_INT2);
}
}
#endif
void __init arch_init_irq(void)
{
- int gic_present, gcmp_present;
-
init_i8259_irqs();
if (!cpu_has_veic)
mips_cpu_irq_init();
- gcmp_present = gcmp_probe(GCMP_BASE_ADDR, GCMP_ADDRSPACE_SZ);
if (gcmp_present) {
GCMPGCB(GICBA) = GIC_BASE_ADDR | GCMP_GCB_GICBA_EN_MSK;
gic_present = 1;
@@ -514,24 +530,10 @@
if (gic_present) {
/* FIXME */
int i;
- struct {
- unsigned int resched;
- unsigned int call;
- } ipiirq[] = {
- {
- .resched = GIC_IPI_EXT_INTR_RESCHED_VPE0,
- .call = GIC_IPI_EXT_INTR_CALLFNC_VPE0},
- {
- .resched = GIC_IPI_EXT_INTR_RESCHED_VPE1,
- .call = GIC_IPI_EXT_INTR_CALLFNC_VPE1
- }, {
- .resched = GIC_IPI_EXT_INTR_RESCHED_VPE2,
- .call = GIC_IPI_EXT_INTR_CALLFNC_VPE2
- }, {
- .resched = GIC_IPI_EXT_INTR_RESCHED_VPE3,
- .call = GIC_IPI_EXT_INTR_CALLFNC_VPE3
- }
- };
+
+ gic_call_int_base = GIC_NUM_INTRS - NR_CPUS;
+ gic_resched_int_base = gic_call_int_base - NR_CPUS;
+
fill_ipi_map();
gic_init(GIC_BASE_ADDR, GIC_ADDRSPACE_SZ, gic_intr_map, ARRAY_SIZE(gic_intr_map), MIPS_GIC_IRQ_BASE);
if (!gcmp_present) {
@@ -553,12 +555,15 @@
printk("CPU%d: status register now %08x\n", smp_processor_id(), read_c0_status());
write_c0_status(0x1100dc00);
printk("CPU%d: status register frc %08x\n", smp_processor_id(), read_c0_status());
- for (i = 0; i < ARRAY_SIZE(ipiirq); i++) {
- setup_irq(MIPS_GIC_IRQ_BASE + ipiirq[i].resched, &irq_resched);
- setup_irq(MIPS_GIC_IRQ_BASE + ipiirq[i].call, &irq_call);
-
- set_irq_handler(MIPS_GIC_IRQ_BASE + ipiirq[i].resched, handle_percpu_irq);
- set_irq_handler(MIPS_GIC_IRQ_BASE + ipiirq[i].call, handle_percpu_irq);
+ for (i = 0; i < NR_CPUS; i++) {
+ setup_irq(MIPS_GIC_IRQ_BASE +
+ GIC_RESCHED_INT(i), &irq_resched);
+ setup_irq(MIPS_GIC_IRQ_BASE +
+ GIC_CALL_INT(i), &irq_call);
+ set_irq_handler(MIPS_GIC_IRQ_BASE +
+ GIC_RESCHED_INT(i), handle_percpu_irq);
+ set_irq_handler(MIPS_GIC_IRQ_BASE +
+ GIC_CALL_INT(i), handle_percpu_irq);
}
} else {
/* set up ipi interrupts */
diff --git a/arch/mips/mti-malta/malta-reset.c b/arch/mips/mti-malta/malta-reset.c
index 42dee4d..f48d60e 100644
--- a/arch/mips/mti-malta/malta-reset.c
+++ b/arch/mips/mti-malta/malta-reset.c
@@ -28,9 +28,6 @@
#include <asm/reboot.h>
#include <asm/mips-boards/generic.h>
-static void mips_machine_restart(char *command);
-static void mips_machine_halt(void);
-
static void mips_machine_restart(char *command)
{
unsigned int __iomem *softres_reg =
diff --git a/arch/mips/pci/Makefile b/arch/mips/pci/Makefile
index e8a97f59e..63d8a29 100644
--- a/arch/mips/pci/Makefile
+++ b/arch/mips/pci/Makefile
@@ -52,3 +52,8 @@
obj-$(CONFIG_ZAO_CAPCELLA) += fixup-capcella.o
obj-$(CONFIG_WR_PPMC) += fixup-wrppmc.o
obj-$(CONFIG_MIKROTIK_RB532) += pci-rc32434.o ops-rc32434.o fixup-rc32434.o
+obj-$(CONFIG_CPU_CAVIUM_OCTEON) += pci-octeon.o pcie-octeon.o
+
+ifdef CONFIG_PCI_MSI
+obj-$(CONFIG_CPU_CAVIUM_OCTEON) += msi-octeon.o
+endif
diff --git a/arch/mips/pci/fixup-capcella.c b/arch/mips/pci/fixup-capcella.c
index 1416bca..1c02f57 100644
--- a/arch/mips/pci/fixup-capcella.c
+++ b/arch/mips/pci/fixup-capcella.c
@@ -1,7 +1,7 @@
/*
* fixup-cappcela.c, The ZAO Networks Capcella specific PCI fixups.
*
- * Copyright (C) 2002,2004 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ * Copyright (C) 2002,2004 Yoichi Yuasa <yuasa@linux-mips.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
diff --git a/arch/mips/pci/fixup-mpc30x.c b/arch/mips/pci/fixup-mpc30x.c
index 5911596..e08f49c 100644
--- a/arch/mips/pci/fixup-mpc30x.c
+++ b/arch/mips/pci/fixup-mpc30x.c
@@ -1,7 +1,7 @@
/*
* fixup-mpc30x.c, The Victor MP-C303/304 specific PCI fixups.
*
- * Copyright (C) 2002,2004 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ * Copyright (C) 2002,2004 Yoichi Yuasa <yuasa@linux-mips.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
diff --git a/arch/mips/pci/fixup-tb0219.c b/arch/mips/pci/fixup-tb0219.c
index ed87733..8084b17 100644
--- a/arch/mips/pci/fixup-tb0219.c
+++ b/arch/mips/pci/fixup-tb0219.c
@@ -2,7 +2,7 @@
* fixup-tb0219.c, The TANBAC TB0219 specific PCI fixups.
*
* Copyright (C) 2003 Megasolution Inc. <matsu@megasolution.jp>
- * Copyright (C) 2004-2005 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ * Copyright (C) 2004-2005 Yoichi Yuasa <yuasa@linux-mips.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
diff --git a/arch/mips/pci/fixup-tb0226.c b/arch/mips/pci/fixup-tb0226.c
index e3eedf4..4196ccf 100644
--- a/arch/mips/pci/fixup-tb0226.c
+++ b/arch/mips/pci/fixup-tb0226.c
@@ -1,7 +1,7 @@
/*
* fixup-tb0226.c, The TANBAC TB0226 specific PCI fixups.
*
- * Copyright (C) 2002-2005 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ * Copyright (C) 2002-2005 Yoichi Yuasa <yuasa@linux-mips.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
diff --git a/arch/mips/pci/fixup-tb0287.c b/arch/mips/pci/fixup-tb0287.c
index 267ab3d..2fe29db 100644
--- a/arch/mips/pci/fixup-tb0287.c
+++ b/arch/mips/pci/fixup-tb0287.c
@@ -1,7 +1,7 @@
/*
* fixup-tb0287.c, The TANBAC TB0287 specific PCI fixups.
*
- * Copyright (C) 2005 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ * Copyright (C) 2005 Yoichi Yuasa <yuasa@linux-mips.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
diff --git a/arch/mips/cavium-octeon/msi.c b/arch/mips/pci/msi-octeon.c
similarity index 87%
rename from arch/mips/cavium-octeon/msi.c
rename to arch/mips/pci/msi-octeon.c
index 964b03b..03742e6 100644
--- a/arch/mips/cavium-octeon/msi.c
+++ b/arch/mips/pci/msi-octeon.c
@@ -3,7 +3,7 @@
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
- * Copyright (C) 2005-2007 Cavium Networks
+ * Copyright (C) 2005-2009 Cavium Networks
*/
#include <linux/kernel.h>
#include <linux/init.h>
@@ -16,8 +16,7 @@
#include <asm/octeon/cvmx-pci-defs.h>
#include <asm/octeon/cvmx-npei-defs.h>
#include <asm/octeon/cvmx-pexp-defs.h>
-
-#include "pci-common.h"
+#include <asm/octeon/pci-octeon.h>
/*
* Each bit in msi_free_irq_bitmask represents a MSI interrupt that is
@@ -47,8 +46,8 @@
* programming the MSI control bits [6:4] before calling
* pci_enable_msi().
*
- * @param dev Device requesting MSI interrupts
- * @param desc MSI descriptor
+ * @dev: Device requesting MSI interrupts
+ * @desc: MSI descriptor
*
* Returns 0 on success.
*/
@@ -213,14 +212,9 @@
}
-/**
+/*
* Called by the interrupt handling code when an MSI interrupt
* occurs.
- *
- * @param cpl
- * @param dev_id
- *
- * @return
*/
static irqreturn_t octeon_msi_interrupt(int cpl, void *dev_id)
{
@@ -256,31 +250,37 @@
}
-/**
+/*
* Initializes the MSI interrupt handling code
- *
- * @return
*/
int octeon_msi_initialize(void)
{
- int r;
if (octeon_has_feature(OCTEON_FEATURE_PCIE)) {
- r = request_irq(OCTEON_IRQ_PCI_MSI0, octeon_msi_interrupt,
+ if (request_irq(OCTEON_IRQ_PCI_MSI0, octeon_msi_interrupt,
IRQF_SHARED,
- "MSI[0:63]", octeon_msi_interrupt);
+ "MSI[0:63]", octeon_msi_interrupt))
+ panic("request_irq(OCTEON_IRQ_PCI_MSI0) failed");
} else if (octeon_is_pci_host()) {
- r = request_irq(OCTEON_IRQ_PCI_MSI0, octeon_msi_interrupt,
+ if (request_irq(OCTEON_IRQ_PCI_MSI0, octeon_msi_interrupt,
IRQF_SHARED,
- "MSI[0:15]", octeon_msi_interrupt);
- r += request_irq(OCTEON_IRQ_PCI_MSI1, octeon_msi_interrupt,
- IRQF_SHARED,
- "MSI[16:31]", octeon_msi_interrupt);
- r += request_irq(OCTEON_IRQ_PCI_MSI2, octeon_msi_interrupt,
- IRQF_SHARED,
- "MSI[32:47]", octeon_msi_interrupt);
- r += request_irq(OCTEON_IRQ_PCI_MSI3, octeon_msi_interrupt,
- IRQF_SHARED,
- "MSI[48:63]", octeon_msi_interrupt);
+ "MSI[0:15]", octeon_msi_interrupt))
+ panic("request_irq(OCTEON_IRQ_PCI_MSI0) failed");
+
+ if (request_irq(OCTEON_IRQ_PCI_MSI1, octeon_msi_interrupt,
+ IRQF_SHARED,
+ "MSI[16:31]", octeon_msi_interrupt))
+ panic("request_irq(OCTEON_IRQ_PCI_MSI1) failed");
+
+ if (request_irq(OCTEON_IRQ_PCI_MSI2, octeon_msi_interrupt,
+ IRQF_SHARED,
+ "MSI[32:47]", octeon_msi_interrupt))
+ panic("request_irq(OCTEON_IRQ_PCI_MSI2) failed");
+
+ if (request_irq(OCTEON_IRQ_PCI_MSI3, octeon_msi_interrupt,
+ IRQF_SHARED,
+ "MSI[48:63]", octeon_msi_interrupt))
+ panic("request_irq(OCTEON_IRQ_PCI_MSI3) failed");
+
}
return 0;
}
diff --git a/arch/mips/pci/ops-vr41xx.c b/arch/mips/pci/ops-vr41xx.c
index 900c6b3..28962a7 100644
--- a/arch/mips/pci/ops-vr41xx.c
+++ b/arch/mips/pci/ops-vr41xx.c
@@ -2,8 +2,8 @@
* ops-vr41xx.c, PCI configuration routines for the PCIU of NEC VR4100 series.
*
* Copyright (C) 2001-2003 MontaVista Software Inc.
- * Author: Yoichi Yuasa <yyuasa@mvista.com or source@mvista.com>
- * Copyright (C) 2004-2005 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ * Author: Yoichi Yuasa <source@mvista.com>
+ * Copyright (C) 2004-2005 Yoichi Yuasa <yuasa@linux-mips.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -21,7 +21,7 @@
*/
/*
* Changes:
- * MontaVista Software Inc. <yyuasa@mvista.com> or <source@mvista.com>
+ * MontaVista Software Inc. <source@mvista.com>
* - New creation, NEC VR4122 and VR4131 are supported.
*/
#include <linux/pci.h>
diff --git a/arch/mips/cavium-octeon/pci.c b/arch/mips/pci/pci-octeon.c
similarity index 78%
rename from arch/mips/cavium-octeon/pci.c
rename to arch/mips/pci/pci-octeon.c
index 67c0ff5..9cb0c807 100644
--- a/arch/mips/cavium-octeon/pci.c
+++ b/arch/mips/pci/pci-octeon.c
@@ -3,7 +3,7 @@
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
- * Copyright (C) 2005-2007 Cavium Networks
+ * Copyright (C) 2005-2009 Cavium Networks
*/
#include <linux/kernel.h>
#include <linux/init.h>
@@ -17,8 +17,7 @@
#include <asm/octeon/octeon.h>
#include <asm/octeon/cvmx-npi-defs.h>
#include <asm/octeon/cvmx-pci-defs.h>
-
-#include "pci-common.h"
+#include <asm/octeon/pci-octeon.h>
#define USE_OCTEON_INTERNAL_ARBITER
@@ -54,6 +53,126 @@
} s;
};
+int __initdata (*octeon_pcibios_map_irq)(const struct pci_dev *dev,
+ u8 slot, u8 pin);
+enum octeon_dma_bar_type octeon_dma_bar_type = OCTEON_DMA_BAR_TYPE_INVALID;
+
+/**
+ * Map a PCI device to the appropriate interrupt line
+ *
+ * @dev: The Linux PCI device structure for the device to map
+ * @slot: The slot number for this device on __BUS 0__. Linux
+ * enumerates through all the bridges and figures out the
+ * slot on Bus 0 where this device eventually hooks to.
+ * @pin: The PCI interrupt pin read from the device, then swizzled
+ * as it goes through each bridge.
+ * Returns Interrupt number for the device
+ */
+int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
+{
+ if (octeon_pcibios_map_irq)
+ return octeon_pcibios_map_irq(dev, slot, pin);
+ else
+ panic("octeon_pcibios_map_irq not set.");
+}
+
+
+/*
+ * Called to perform platform specific PCI setup
+ */
+int pcibios_plat_dev_init(struct pci_dev *dev)
+{
+ uint16_t config;
+ uint32_t dconfig;
+ int pos;
+ /*
+ * Force the Cache line setting to 64 bytes. The standard
+ * Linux bus scan doesn't seem to set it. Octeon really has
+ * 128 byte lines, but Intel bridges get really upset if you
+ * try and set values above 64 bytes. Value is specified in
+ * 32bit words.
+ */
+ pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, 64 / 4);
+ /* Set latency timers for all devices */
+ pci_write_config_byte(dev, PCI_LATENCY_TIMER, 48);
+
+ /* Enable reporting System errors and parity errors on all devices */
+ /* Enable parity checking and error reporting */
+ pci_read_config_word(dev, PCI_COMMAND, &config);
+ config |= PCI_COMMAND_PARITY | PCI_COMMAND_SERR;
+ pci_write_config_word(dev, PCI_COMMAND, config);
+
+ if (dev->subordinate) {
+ /* Set latency timers on sub bridges */
+ pci_write_config_byte(dev, PCI_SEC_LATENCY_TIMER, 48);
+ /* More bridge error detection */
+ pci_read_config_word(dev, PCI_BRIDGE_CONTROL, &config);
+ config |= PCI_BRIDGE_CTL_PARITY | PCI_BRIDGE_CTL_SERR;
+ pci_write_config_word(dev, PCI_BRIDGE_CONTROL, config);
+ }
+
+ /* Enable the PCIe normal error reporting */
+ pos = pci_find_capability(dev, PCI_CAP_ID_EXP);
+ if (pos) {
+ /* Update Device Control */
+ pci_read_config_word(dev, pos + PCI_EXP_DEVCTL, &config);
+ /* Correctable Error Reporting */
+ config |= PCI_EXP_DEVCTL_CERE;
+ /* Non-Fatal Error Reporting */
+ config |= PCI_EXP_DEVCTL_NFERE;
+ /* Fatal Error Reporting */
+ config |= PCI_EXP_DEVCTL_FERE;
+ /* Unsupported Request */
+ config |= PCI_EXP_DEVCTL_URRE;
+ pci_write_config_word(dev, pos + PCI_EXP_DEVCTL, config);
+ }
+
+ /* Find the Advanced Error Reporting capability */
+ pos = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_ERR);
+ if (pos) {
+ /* Clear Uncorrectable Error Status */
+ pci_read_config_dword(dev, pos + PCI_ERR_UNCOR_STATUS,
+ &dconfig);
+ pci_write_config_dword(dev, pos + PCI_ERR_UNCOR_STATUS,
+ dconfig);
+ /* Enable reporting of all uncorrectable errors */
+ /* Uncorrectable Error Mask - turned on bits disable errors */
+ pci_write_config_dword(dev, pos + PCI_ERR_UNCOR_MASK, 0);
+ /*
+ * Leave severity at HW default. This only controls if
+ * errors are reported as uncorrectable or
+ * correctable, not if the error is reported.
+ */
+ /* PCI_ERR_UNCOR_SEVER - Uncorrectable Error Severity */
+ /* Clear Correctable Error Status */
+ pci_read_config_dword(dev, pos + PCI_ERR_COR_STATUS, &dconfig);
+ pci_write_config_dword(dev, pos + PCI_ERR_COR_STATUS, dconfig);
+ /* Enable reporting of all correctable errors */
+ /* Correctable Error Mask - turned on bits disable errors */
+ pci_write_config_dword(dev, pos + PCI_ERR_COR_MASK, 0);
+ /* Advanced Error Capabilities */
+ pci_read_config_dword(dev, pos + PCI_ERR_CAP, &dconfig);
+ /* ECRC Generation Enable */
+ if (config & PCI_ERR_CAP_ECRC_GENC)
+ config |= PCI_ERR_CAP_ECRC_GENE;
+ /* ECRC Check Enable */
+ if (config & PCI_ERR_CAP_ECRC_CHKC)
+ config |= PCI_ERR_CAP_ECRC_CHKE;
+ pci_write_config_dword(dev, pos + PCI_ERR_CAP, dconfig);
+ /* PCI_ERR_HEADER_LOG - Header Log Register (16 bytes) */
+ /* Report all errors to the root complex */
+ pci_write_config_dword(dev, pos + PCI_ERR_ROOT_COMMAND,
+ PCI_ERR_ROOT_CMD_COR_EN |
+ PCI_ERR_ROOT_CMD_NONFATAL_EN |
+ PCI_ERR_ROOT_CMD_FATAL_EN);
+ /* Clear the Root status register */
+ pci_read_config_dword(dev, pos + PCI_ERR_ROOT_STATUS, &dconfig);
+ pci_write_config_dword(dev, pos + PCI_ERR_ROOT_STATUS, dconfig);
+ }
+
+ return 0;
+}
+
/**
* Return the mapping of PCI device number to IRQ line. Each
* character in the return string represents the interrupt
@@ -136,9 +255,8 @@
}
-/**
+/*
* Read a value from configuration space
- *
*/
static int octeon_read_config(struct pci_bus *bus, unsigned int devfn,
int reg, int size, u32 *val)
@@ -174,15 +292,8 @@
}
-/**
+/*
* Write a value to PCI configuration space
- *
- * @bus:
- * @devfn:
- * @reg:
- * @size:
- * @val:
- * Returns
*/
static int octeon_write_config(struct pci_bus *bus, unsigned int devfn,
int reg, int size, u32 val)
@@ -251,10 +362,8 @@
};
-/**
+/*
* Low level initialize the Octeon PCI controller
- *
- * Returns
*/
static void octeon_pci_initialize(void)
{
@@ -398,7 +507,7 @@
pci_int_arb_cfg.s.en = 1; /* Internal arbiter enable */
cvmx_write_csr(CVMX_NPI_PCI_INT_ARB_CFG, pci_int_arb_cfg.u64);
}
-#endif /* USE_OCTEON_INTERNAL_ARBITER */
+#endif /* USE_OCTEON_INTERNAL_ARBITER */
/*
* Preferrably written to 1 to set MLTD. [RDSATI,TRTAE,
@@ -457,10 +566,8 @@
}
-/**
+/*
* Initialize the Octeon PCI controller
- *
- * Returns
*/
static int __init octeon_pci_setup(void)
{
diff --git a/arch/mips/pci/pci-vr41xx.c b/arch/mips/pci/pci-vr41xx.c
index d1e049b..5652571 100644
--- a/arch/mips/pci/pci-vr41xx.c
+++ b/arch/mips/pci/pci-vr41xx.c
@@ -2,8 +2,8 @@
* pci-vr41xx.c, PCI Control Unit routines for the NEC VR4100 series.
*
* Copyright (C) 2001-2003 MontaVista Software Inc.
- * Author: Yoichi Yuasa <yyuasa@mvista.com or source@mvista.com>
- * Copyright (C) 2004-2008 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ * Author: Yoichi Yuasa <source@mvista.com>
+ * Copyright (C) 2004-2008 Yoichi Yuasa <yuasa@linux-mips.org>
* Copyright (C) 2004 by Ralf Baechle (ralf@linux-mips.org)
*
* This program is free software; you can redistribute it and/or modify
@@ -22,7 +22,7 @@
*/
/*
* Changes:
- * MontaVista Software Inc. <yyuasa@mvista.com> or <source@mvista.com>
+ * MontaVista Software Inc. <source@mvista.com>
* - New creation, NEC VR4122 and VR4131 are supported.
*/
#include <linux/init.h>
diff --git a/arch/mips/pci/pci-vr41xx.h b/arch/mips/pci/pci-vr41xx.h
index 8a35e32..6b1ae2e 100644
--- a/arch/mips/pci/pci-vr41xx.h
+++ b/arch/mips/pci/pci-vr41xx.h
@@ -2,8 +2,8 @@
* pci-vr41xx.h, Include file for PCI Control Unit of the NEC VR4100 series.
*
* Copyright (C) 2002 MontaVista Software Inc.
- * Author: Yoichi Yuasa <yyuasa@mvista.com or source@mvista.com>
- * Copyright (C) 2004-2005 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ * Author: Yoichi Yuasa <source@mvista.com>
+ * Copyright (C) 2004-2005 Yoichi Yuasa <yuasa@linux-mips.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
diff --git a/arch/mips/cavium-octeon/pcie.c b/arch/mips/pci/pcie-octeon.c
similarity index 98%
rename from arch/mips/cavium-octeon/pcie.c
rename to arch/mips/pci/pcie-octeon.c
index 49d1408..7526224 100644
--- a/arch/mips/cavium-octeon/pcie.c
+++ b/arch/mips/pci/pcie-octeon.c
@@ -18,8 +18,7 @@
#include <asm/octeon/cvmx-pescx-defs.h>
#include <asm/octeon/cvmx-pexp-defs.h>
#include <asm/octeon/cvmx-helper-errata.h>
-
-#include "pci-common.h"
+#include <asm/octeon/pci-octeon.h>
union cvmx_pcie_address {
uint64_t u64;
@@ -976,13 +975,13 @@
/**
* Map a PCI device to the appropriate interrupt line
*
- * @param dev The Linux PCI device structure for the device to map
- * @param slot The slot number for this device on __BUS 0__. Linux
+ * @dev: The Linux PCI device structure for the device to map
+ * @slot: The slot number for this device on __BUS 0__. Linux
* enumerates through all the bridges and figures out the
* slot on Bus 0 where this device eventually hooks to.
- * @param pin The PCI interrupt pin read from the device, then swizzled
+ * @pin: The PCI interrupt pin read from the device, then swizzled
* as it goes through each bridge.
- * @return Interrupt number for the device
+ * Returns Interrupt number for the device
*/
int __init octeon_pcie_pcibios_map_irq(const struct pci_dev *dev,
u8 slot, u8 pin)
@@ -1025,12 +1024,12 @@
/**
* Read a value from configuration space
*
- * @param bus
- * @param devfn
- * @param reg
- * @param size
- * @param val
- * @return
+ * @bus:
+ * @devfn:
+ * @reg:
+ * @size:
+ * @val:
+ * Returns
*/
static inline int octeon_pcie_read_config(int pcie_port, struct pci_bus *bus,
unsigned int devfn, int reg, int size,
@@ -1156,12 +1155,12 @@
/**
* Write a value to PCI configuration space
*
- * @param bus
- * @param devfn
- * @param reg
- * @param size
- * @param val
- * @return
+ * @bus:
+ * @devfn:
+ * @reg:
+ * @size:
+ * @val:
+ * Returns
*/
static inline int octeon_pcie_write_config(int pcie_port, struct pci_bus *bus,
unsigned int devfn, int reg,
@@ -1254,7 +1253,7 @@
/**
* Initialize the Octeon PCIe controllers
*
- * @return
+ * Returns
*/
static int __init octeon_pcie_setup(void)
{
diff --git a/arch/mips/vr41xx/casio-e55/setup.c b/arch/mips/vr41xx/casio-e55/setup.c
index 6d9bab8..719f4a5 100644
--- a/arch/mips/vr41xx/casio-e55/setup.c
+++ b/arch/mips/vr41xx/casio-e55/setup.c
@@ -1,7 +1,7 @@
/*
* setup.c, Setup for the CASIO CASSIOPEIA E-11/15/55/65.
*
- * Copyright (C) 2002-2006 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ * Copyright (C) 2002-2006 Yoichi Yuasa <yuasa@linux-mips.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
diff --git a/arch/mips/vr41xx/common/bcu.c b/arch/mips/vr41xx/common/bcu.c
index d77c330..6346c59 100644
--- a/arch/mips/vr41xx/common/bcu.c
+++ b/arch/mips/vr41xx/common/bcu.c
@@ -2,8 +2,8 @@
* bcu.c, Bus Control Unit routines for the NEC VR4100 series.
*
* Copyright (C) 2002 MontaVista Software Inc.
- * Author: Yoichi Yuasa <yyuasa@mvista.com, or source@mvista.com>
- * Copyright (C) 2003-2005 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ * Author: Yoichi Yuasa <source@mvista.com>
+ * Copyright (C) 2003-2005 Yoichi Yuasa <yuasa@linux-mips.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -21,11 +21,11 @@
*/
/*
* Changes:
- * MontaVista Software Inc. <yyuasa@mvista.com> or <source@mvista.com>
+ * MontaVista Software Inc. <source@mvista.com>
* - New creation, NEC VR4122 and VR4131 are supported.
* - Added support for NEC VR4111 and VR4121.
*
- * Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ * Yoichi Yuasa <yuasa@linux-mips.org>
* - Added support for NEC VR4133.
*/
#include <linux/kernel.h>
diff --git a/arch/mips/vr41xx/common/cmu.c b/arch/mips/vr41xx/common/cmu.c
index ad0e8e3..8ba7d04 100644
--- a/arch/mips/vr41xx/common/cmu.c
+++ b/arch/mips/vr41xx/common/cmu.c
@@ -2,8 +2,8 @@
* cmu.c, Clock Mask Unit routines for the NEC VR4100 series.
*
* Copyright (C) 2001-2002 MontaVista Software Inc.
- * Author: Yoichi Yuasa <yyuasa@mvista.com or source@mvista.com>
- * Copuright (C) 2003-2005 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ * Author: Yoichi Yuasa <source@mvista.com>
+ * Copuright (C) 2003-2005 Yoichi Yuasa <yuasa@linux-mips.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -21,11 +21,11 @@
*/
/*
* Changes:
- * MontaVista Software Inc. <yyuasa@mvista.com> or <source@mvista.com>
+ * MontaVista Software Inc. <source@mvista.com>
* - New creation, NEC VR4122 and VR4131 are supported.
* - Added support for NEC VR4111 and VR4121.
*
- * Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ * Yoichi Yuasa <yuasa@linux-mips.org>
* - Added support for NEC VR4133.
*/
#include <linux/init.h>
diff --git a/arch/mips/vr41xx/common/giu.c b/arch/mips/vr41xx/common/giu.c
index 2b272f1..22cc6f2 100644
--- a/arch/mips/vr41xx/common/giu.c
+++ b/arch/mips/vr41xx/common/giu.c
@@ -1,7 +1,7 @@
/*
* NEC VR4100 series GIU platform device.
*
- * Copyright (C) 2007 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ * Copyright (C) 2007 Yoichi Yuasa <yuasa@linux-mips.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
diff --git a/arch/mips/vr41xx/common/icu.c b/arch/mips/vr41xx/common/icu.c
index 3f23d9f..6d39e22 100644
--- a/arch/mips/vr41xx/common/icu.c
+++ b/arch/mips/vr41xx/common/icu.c
@@ -2,8 +2,8 @@
* icu.c, Interrupt Control Unit routines for the NEC VR4100 series.
*
* Copyright (C) 2001-2002 MontaVista Software Inc.
- * Author: Yoichi Yuasa <yyuasa@mvista.com or source@mvista.com>
- * Copyright (C) 2003-2006 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ * Author: Yoichi Yuasa <source@mvista.com>
+ * Copyright (C) 2003-2006 Yoichi Yuasa <yuasa@linux-mips.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -21,11 +21,11 @@
*/
/*
* Changes:
- * MontaVista Software Inc. <yyuasa@mvista.com> or <source@mvista.com>
+ * MontaVista Software Inc. <source@mvista.com>
* - New creation, NEC VR4122 and VR4131 are supported.
* - Added support for NEC VR4111 and VR4121.
*
- * Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ * Yoichi Yuasa <yuasa@linux-mips.org>
* - Coped with INTASSIGN of NEC VR4133.
*/
#include <linux/errno.h>
diff --git a/arch/mips/vr41xx/common/init.c b/arch/mips/vr41xx/common/init.c
index c649953..1386e6f 100644
--- a/arch/mips/vr41xx/common/init.c
+++ b/arch/mips/vr41xx/common/init.c
@@ -1,7 +1,7 @@
/*
* init.c, Common initialization routines for NEC VR4100 series.
*
- * Copyright (C) 2003-2008 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ * Copyright (C) 2003-2008 Yoichi Yuasa <yuasa@linux-mips.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
diff --git a/arch/mips/vr41xx/common/irq.c b/arch/mips/vr41xx/common/irq.c
index 9cc3891..bef0687 100644
--- a/arch/mips/vr41xx/common/irq.c
+++ b/arch/mips/vr41xx/common/irq.c
@@ -1,7 +1,7 @@
/*
* Interrupt handing routines for NEC VR4100 series.
*
- * Copyright (C) 2005-2007 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ * Copyright (C) 2005-2007 Yoichi Yuasa <yuasa@linux-mips.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
diff --git a/arch/mips/vr41xx/common/pmu.c b/arch/mips/vr41xx/common/pmu.c
index 028aaf7..692b4e8 100644
--- a/arch/mips/vr41xx/common/pmu.c
+++ b/arch/mips/vr41xx/common/pmu.c
@@ -1,7 +1,7 @@
/*
* pmu.c, Power Management Unit routines for NEC VR4100 series.
*
- * Copyright (C) 2003-2007 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ * Copyright (C) 2003-2007 Yoichi Yuasa <yuasa@linux-mips.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
diff --git a/arch/mips/vr41xx/common/rtc.c b/arch/mips/vr41xx/common/rtc.c
index 9f26c14..ebc5dcf 100644
--- a/arch/mips/vr41xx/common/rtc.c
+++ b/arch/mips/vr41xx/common/rtc.c
@@ -1,7 +1,7 @@
/*
* NEC VR4100 series RTC platform device.
*
- * Copyright (C) 2007 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ * Copyright (C) 2007 Yoichi Yuasa <yuasa@linux-mips.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
diff --git a/arch/mips/vr41xx/common/siu.c b/arch/mips/vr41xx/common/siu.c
index 654dee6..54eae56 100644
--- a/arch/mips/vr41xx/common/siu.c
+++ b/arch/mips/vr41xx/common/siu.c
@@ -1,7 +1,7 @@
/*
* NEC VR4100 series SIU platform device.
*
- * Copyright (C) 2007-2008 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ * Copyright (C) 2007-2008 Yoichi Yuasa <yuasa@linux-mips.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
diff --git a/arch/mips/vr41xx/common/type.c b/arch/mips/vr41xx/common/type.c
index e0c1ac5..ff84142 100644
--- a/arch/mips/vr41xx/common/type.c
+++ b/arch/mips/vr41xx/common/type.c
@@ -1,7 +1,7 @@
/*
* type.c, System type for NEC VR4100 series.
*
- * Copyright (C) 2005 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ * Copyright (C) 2005 Yoichi Yuasa <yuasa@linux-mips.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
diff --git a/arch/mips/vr41xx/ibm-workpad/setup.c b/arch/mips/vr41xx/ibm-workpad/setup.c
index 9eef297..3982f37 100644
--- a/arch/mips/vr41xx/ibm-workpad/setup.c
+++ b/arch/mips/vr41xx/ibm-workpad/setup.c
@@ -1,7 +1,7 @@
/*
* setup.c, Setup for the IBM WorkPad z50.
*
- * Copyright (C) 2002-2006 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ * Copyright (C) 2002-2006 Yoichi Yuasa <yuasa@linux-mips.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
diff --git a/arch/mn10300/include/asm/pci.h b/arch/mn10300/include/asm/pci.h
index e58b9a4..35d2ed6 100644
--- a/arch/mn10300/include/asm/pci.h
+++ b/arch/mn10300/include/asm/pci.h
@@ -70,10 +70,6 @@
*/
#define PCI_DMA_BUS_IS_PHYS (1)
-
-/* This is always fine. */
-#define pci_dac_dma_supported(pci_dev, mask) (0)
-
/* Return the index of the PCI controller for device. */
static inline int pci_controller_num(struct pci_dev *dev)
{
diff --git a/arch/mn10300/include/asm/thread_info.h b/arch/mn10300/include/asm/thread_info.h
index 78a3881..58d64f8 100644
--- a/arch/mn10300/include/asm/thread_info.h
+++ b/arch/mn10300/include/asm/thread_info.h
@@ -65,8 +65,6 @@
/*
* macros/functions for gaining access to the thread information structure
- *
- * preempt_count needs to be 1 initially, until the scheduler is functional.
*/
#ifndef __ASSEMBLY__
@@ -76,7 +74,7 @@
.exec_domain = &default_exec_domain, \
.flags = 0, \
.cpu = 0, \
- .preempt_count = 1, \
+ .preempt_count = INIT_PREEMPT_COUNT, \
.addr_limit = KERNEL_DS, \
.restart_block = { \
.fn = do_no_restart_syscall, \
diff --git a/arch/mn10300/include/asm/unistd.h b/arch/mn10300/include/asm/unistd.h
index fef5b43..fad6861 100644
--- a/arch/mn10300/include/asm/unistd.h
+++ b/arch/mn10300/include/asm/unistd.h
@@ -346,10 +346,12 @@
#define __NR_inotify_init1 333
#define __NR_preadv 334
#define __NR_pwritev 335
+#define __NR_rt_tgsigqueueinfo 336
+#define __NR_perf_counter_open 337
#ifdef __KERNEL__
-#define NR_syscalls 326
+#define NR_syscalls 338
/*
* specify the deprecated syscalls we want to support on this arch
diff --git a/arch/mn10300/kernel/entry.S b/arch/mn10300/kernel/entry.S
index 7408a27..e0d2563 100644
--- a/arch/mn10300/kernel/entry.S
+++ b/arch/mn10300/kernel/entry.S
@@ -722,6 +722,8 @@
.long sys_inotify_init1
.long sys_preadv
.long sys_pwritev /* 335 */
+ .long sys_rt_tgsigqueueinfo
+ .long sys_perf_counter_open
nr_syscalls=(.-sys_call_table)/4
diff --git a/arch/mn10300/kernel/ptrace.c b/arch/mn10300/kernel/ptrace.c
index e143339..cf847da 100644
--- a/arch/mn10300/kernel/ptrace.c
+++ b/arch/mn10300/kernel/ptrace.c
@@ -13,7 +13,6 @@
#include <linux/sched.h>
#include <linux/mm.h>
#include <linux/smp.h>
-#include <linux/smp_lock.h>
#include <linux/errno.h>
#include <linux/ptrace.h>
#include <linux/user.h>
diff --git a/arch/mn10300/kernel/signal.c b/arch/mn10300/kernel/signal.c
index 9f7572a..feb2f2e 100644
--- a/arch/mn10300/kernel/signal.c
+++ b/arch/mn10300/kernel/signal.c
@@ -12,7 +12,6 @@
#include <linux/sched.h>
#include <linux/mm.h>
#include <linux/smp.h>
-#include <linux/smp_lock.h>
#include <linux/kernel.h>
#include <linux/signal.h>
#include <linux/errno.h>
diff --git a/arch/mn10300/kernel/sys_mn10300.c b/arch/mn10300/kernel/sys_mn10300.c
index bca5a84..3e52a10 100644
--- a/arch/mn10300/kernel/sys_mn10300.c
+++ b/arch/mn10300/kernel/sys_mn10300.c
@@ -13,7 +13,6 @@
#include <linux/syscalls.h>
#include <linux/mm.h>
#include <linux/smp.h>
-#include <linux/smp_lock.h>
#include <linux/sem.h>
#include <linux/msg.h>
#include <linux/shm.h>
@@ -21,7 +20,6 @@
#include <linux/mman.h>
#include <linux/file.h>
#include <linux/utsname.h>
-#include <linux/syscalls.h>
#include <linux/tty.h>
#include <asm/uaccess.h>
diff --git a/arch/mn10300/kernel/traps.c b/arch/mn10300/kernel/traps.c
index 681ad8c..91365ad 100644
--- a/arch/mn10300/kernel/traps.c
+++ b/arch/mn10300/kernel/traps.c
@@ -17,7 +17,6 @@
#include <linux/timer.h>
#include <linux/mm.h>
#include <linux/smp.h>
-#include <linux/smp_lock.h>
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/spinlock.h>
@@ -136,8 +135,7 @@
unsigned long *stack, addr, module_start, module_end;
int i;
- printk(KERN_EMERG "\n"
- KERN_EMERG "Call Trace:");
+ printk(KERN_EMERG "\nCall Trace:");
stack = sp;
i = 0;
@@ -153,7 +151,7 @@
printk("\n");
#else
if ((i % 6) == 0)
- printk("\n" KERN_EMERG " ");
+ printk(KERN_EMERG " ");
printk("[<%08lx>] ", addr);
i++;
#endif
@@ -180,7 +178,7 @@
if (((long) stack & (THREAD_SIZE - 1)) == 0)
break;
if ((i % 8) == 0)
- printk("\n" KERN_EMERG " ");
+ printk(KERN_EMERG " ");
printk("%08lx ", *stack++);
}
@@ -264,8 +262,7 @@
show_stack(current, (unsigned long *) sp);
#if 0
- printk(KERN_EMERG "\n"
- KERN_EMERG "Code: ");
+ printk(KERN_EMERG "\nCode: ");
if (regs->pc < PAGE_OFFSET)
goto bad;
@@ -311,16 +308,14 @@
{
console_verbose();
spin_lock_irq(&die_lock);
- printk(KERN_EMERG "\n"
- KERN_EMERG "%s: %04x\n",
+ printk(KERN_EMERG "\n%s: %04x\n",
str, code & 0xffff);
show_registers(regs);
if (regs->pc >= 0x02000000 && regs->pc < 0x04000000 &&
(regs->epsw & (EPSW_IM | EPSW_IE)) != (EPSW_IM | EPSW_IE)) {
printk(KERN_EMERG "Exception in usermode interrupt handler\n");
- printk(KERN_EMERG "\n"
- KERN_EMERG " Please connect to kernel debugger !!\n");
+ printk(KERN_EMERG "\nPlease connect to kernel debugger !!\n");
asm volatile ("0: bra 0b");
}
@@ -429,9 +424,8 @@
{
console_verbose();
- printk(KERN_EMERG "\n"
- KERN_EMERG "Asynchronous I/O Bus Error\n"
- KERN_EMERG "==========================\n");
+ printk(KERN_EMERG "Asynchronous I/O Bus Error\n");
+ printk(KERN_EMERG "==========================\n");
if (bcberr & BCBERR_BEME)
printk(KERN_EMERG "- Multiple recorded errors\n");
diff --git a/arch/mn10300/kernel/vmlinux.lds.S b/arch/mn10300/kernel/vmlinux.lds.S
index bcebcef..c96ba3d 100644
--- a/arch/mn10300/kernel/vmlinux.lds.S
+++ b/arch/mn10300/kernel/vmlinux.lds.S
@@ -61,7 +61,7 @@
_edata = .; /* End of data section */
}
- .data.init_task : { INIT_TASK(THREAD_SIZE); }
+ .data.init_task : { INIT_TASK_DATA(THREAD_SIZE); }
/* might get freed after init */
. = ALIGN(PAGE_SIZE);
diff --git a/arch/mn10300/mm/fault.c b/arch/mn10300/mm/fault.c
index a62e1e13..53bb17d 100644
--- a/arch/mn10300/mm/fault.c
+++ b/arch/mn10300/mm/fault.c
@@ -20,7 +20,6 @@
#include <linux/mman.h>
#include <linux/mm.h>
#include <linux/smp.h>
-#include <linux/smp_lock.h>
#include <linux/interrupt.h>
#include <linux/init.h>
#include <linux/vt_kern.h> /* For unblank_screen() */
diff --git a/arch/mn10300/mm/misalignment.c b/arch/mn10300/mm/misalignment.c
index 94c4a43..3001625 100644
--- a/arch/mn10300/mm/misalignment.c
+++ b/arch/mn10300/mm/misalignment.c
@@ -17,7 +17,6 @@
#include <linux/timer.h>
#include <linux/mm.h>
#include <linux/smp.h>
-#include <linux/smp_lock.h>
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/spinlock.h>
diff --git a/arch/parisc/Kconfig b/arch/parisc/Kconfig
index 9038f39..06f8d5b 100644
--- a/arch/parisc/Kconfig
+++ b/arch/parisc/Kconfig
@@ -16,6 +16,8 @@
select RTC_DRV_GENERIC
select INIT_ALL_POSSIBLE
select BUG
+ select HAVE_PERF_COUNTERS
+ select GENERIC_ATOMIC64 if !64BIT
help
The PA-RISC microprocessor is designed by Hewlett-Packard and used
in many of their workstations & servers (HP9000 700 and 800 series,
diff --git a/arch/parisc/include/asm/atomic.h b/arch/parisc/include/asm/atomic.h
index 7eeaff9..8bc9e96 100644
--- a/arch/parisc/include/asm/atomic.h
+++ b/arch/parisc/include/asm/atomic.h
@@ -222,13 +222,13 @@
#define atomic_inc_not_zero(v) atomic_add_unless((v), 1, 0)
-#define atomic_add(i,v) ((void)(__atomic_add_return( ((int)(i)),(v))))
-#define atomic_sub(i,v) ((void)(__atomic_add_return(-((int)(i)),(v))))
+#define atomic_add(i,v) ((void)(__atomic_add_return( (i),(v))))
+#define atomic_sub(i,v) ((void)(__atomic_add_return(-(i),(v))))
#define atomic_inc(v) ((void)(__atomic_add_return( 1,(v))))
#define atomic_dec(v) ((void)(__atomic_add_return( -1,(v))))
-#define atomic_add_return(i,v) (__atomic_add_return( ((int)(i)),(v)))
-#define atomic_sub_return(i,v) (__atomic_add_return(-((int)(i)),(v)))
+#define atomic_add_return(i,v) (__atomic_add_return( (i),(v)))
+#define atomic_sub_return(i,v) (__atomic_add_return(-(i),(v)))
#define atomic_inc_return(v) (__atomic_add_return( 1,(v)))
#define atomic_dec_return(v) (__atomic_add_return( -1,(v)))
@@ -336,7 +336,11 @@
#define atomic64_inc_not_zero(v) atomic64_add_unless((v), 1, 0)
-#endif /* CONFIG_64BIT */
+#else /* CONFIG_64BIT */
+
+#include <asm-generic/atomic64.h>
+
+#endif /* !CONFIG_64BIT */
#include <asm-generic/atomic-long.h>
diff --git a/arch/parisc/include/asm/dma.h b/arch/parisc/include/asm/dma.h
index 31ad0f0..f7a18f9 100644
--- a/arch/parisc/include/asm/dma.h
+++ b/arch/parisc/include/asm/dma.h
@@ -1,5 +1,4 @@
-/* $Id: dma.h,v 1.2 1999/04/27 00:46:18 deller Exp $
- * linux/include/asm/dma.h: Defines for using and allocating dma channels.
+/* asm/dma.h: Defines for using and allocating dma channels.
* Written by Hennus Bergman, 1992.
* High DMA channel support & info by Hannu Savolainen
* and John Boyd, Nov. 1992.
diff --git a/arch/parisc/include/asm/perf_counter.h b/arch/parisc/include/asm/perf_counter.h
new file mode 100644
index 0000000..dc9e829
--- /dev/null
+++ b/arch/parisc/include/asm/perf_counter.h
@@ -0,0 +1,7 @@
+#ifndef __ASM_PARISC_PERF_COUNTER_H
+#define __ASM_PARISC_PERF_COUNTER_H
+
+/* parisc only supports software counters through this interface. */
+static inline void set_perf_counter_pending(void) { }
+
+#endif /* __ASM_PARISC_PERF_COUNTER_H */
diff --git a/arch/parisc/include/asm/processor.h b/arch/parisc/include/asm/processor.h
index 9d64df8..9ce66e9 100644
--- a/arch/parisc/include/asm/processor.h
+++ b/arch/parisc/include/asm/processor.h
@@ -18,6 +18,7 @@
#include <asm/types.h>
#include <asm/system.h>
#include <asm/percpu.h>
+
#endif /* __ASSEMBLY__ */
#define KERNEL_STACK_SIZE (4*PAGE_SIZE)
@@ -127,6 +128,8 @@
unsigned long flags;
};
+#define task_pt_regs(tsk) ((struct pt_regs *)&((tsk)->thread.regs))
+
/* Thread struct flags. */
#define PARISC_UAC_NOPRINT (1UL << 0) /* see prctl and unaligned.c */
#define PARISC_UAC_SIGBUS (1UL << 1)
diff --git a/arch/parisc/include/asm/system.h b/arch/parisc/include/asm/system.h
index ee80c92..d91357b 100644
--- a/arch/parisc/include/asm/system.h
+++ b/arch/parisc/include/asm/system.h
@@ -168,8 +168,8 @@
/* LDCW, the only atomic read-write operation PA-RISC has. *sigh*. */
#define __ldcw(a) ({ \
unsigned __ret; \
- __asm__ __volatile__(__LDCW " 0(%1),%0" \
- : "=r" (__ret) : "r" (a)); \
+ __asm__ __volatile__(__LDCW " 0(%2),%0" \
+ : "=r" (__ret), "+m" (*(a)) : "r" (a)); \
__ret; \
})
diff --git a/arch/parisc/include/asm/thread_info.h b/arch/parisc/include/asm/thread_info.h
index 0407959..4ce0edf 100644
--- a/arch/parisc/include/asm/thread_info.h
+++ b/arch/parisc/include/asm/thread_info.h
@@ -23,7 +23,7 @@
.flags = 0, \
.cpu = 0, \
.addr_limit = KERNEL_DS, \
- .preempt_count = 1, \
+ .preempt_count = INIT_PREEMPT_COUNT, \
.restart_block = { \
.fn = do_no_restart_syscall \
} \
diff --git a/arch/parisc/include/asm/tlbflush.h b/arch/parisc/include/asm/tlbflush.h
index 1f6fd4f..8f1a810 100644
--- a/arch/parisc/include/asm/tlbflush.h
+++ b/arch/parisc/include/asm/tlbflush.h
@@ -12,14 +12,12 @@
* N class systems, only one PxTLB inter processor broadcast can be
* active at any one time on the Merced bus. This tlb purge
* synchronisation is fairly lightweight and harmless so we activate
- * it on all SMP systems not just the N class. We also need to have
- * preemption disabled on uniprocessor machines, and spin_lock does that
- * nicely.
+ * it on all systems not just the N class.
*/
extern spinlock_t pa_tlb_lock;
-#define purge_tlb_start(x) spin_lock(&pa_tlb_lock)
-#define purge_tlb_end(x) spin_unlock(&pa_tlb_lock)
+#define purge_tlb_start(flags) spin_lock_irqsave(&pa_tlb_lock, flags)
+#define purge_tlb_end(flags) spin_unlock_irqrestore(&pa_tlb_lock, flags)
extern void flush_tlb_all(void);
extern void flush_tlb_all_local(void *);
@@ -63,14 +61,16 @@
static inline void flush_tlb_page(struct vm_area_struct *vma,
unsigned long addr)
{
+ unsigned long flags;
+
/* For one page, it's not worth testing the split_tlb variable */
mb();
mtsp(vma->vm_mm->context,1);
- purge_tlb_start();
+ purge_tlb_start(flags);
pdtlb(addr);
pitlb(addr);
- purge_tlb_end();
+ purge_tlb_end(flags);
}
void __flush_tlb_range(unsigned long sid,
diff --git a/arch/parisc/include/asm/unistd.h b/arch/parisc/include/asm/unistd.h
index ef26b00..f3d3b8b 100644
--- a/arch/parisc/include/asm/unistd.h
+++ b/arch/parisc/include/asm/unistd.h
@@ -807,8 +807,12 @@
#define __NR_dup3 (__NR_Linux + 312)
#define __NR_pipe2 (__NR_Linux + 313)
#define __NR_inotify_init1 (__NR_Linux + 314)
+#define __NR_preadv (__NR_Linux + 315)
+#define __NR_pwritev (__NR_Linux + 316)
+#define __NR_rt_tgsigqueueinfo (__NR_Linux + 317)
+#define __NR_perf_counter_open (__NR_Linux + 318)
-#define __NR_Linux_syscalls (__NR_inotify_init1 + 1)
+#define __NR_Linux_syscalls (__NR_perf_counter_open + 1)
#define __IGNORE_select /* newselect */
diff --git a/arch/parisc/kernel/cache.c b/arch/parisc/kernel/cache.c
index 837530e..b6ed34d 100644
--- a/arch/parisc/kernel/cache.c
+++ b/arch/parisc/kernel/cache.c
@@ -1,5 +1,4 @@
-/* $Id: cache.c,v 1.4 2000/01/25 00:11:38 prumpf Exp $
- *
+/*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
@@ -398,12 +397,13 @@
void clear_user_page_asm(void *page, unsigned long vaddr)
{
+ unsigned long flags;
/* This function is implemented in assembly in pacache.S */
extern void __clear_user_page_asm(void *page, unsigned long vaddr);
- purge_tlb_start();
+ purge_tlb_start(flags);
__clear_user_page_asm(page, vaddr);
- purge_tlb_end();
+ purge_tlb_end(flags);
}
#define FLUSH_THRESHOLD 0x80000 /* 0.5MB */
@@ -444,20 +444,24 @@
void clear_user_page(void *page, unsigned long vaddr, struct page *pg)
{
+ unsigned long flags;
+
purge_kernel_dcache_page((unsigned long)page);
- purge_tlb_start();
+ purge_tlb_start(flags);
pdtlb_kernel(page);
- purge_tlb_end();
+ purge_tlb_end(flags);
clear_user_page_asm(page, vaddr);
}
EXPORT_SYMBOL(clear_user_page);
void flush_kernel_dcache_page_addr(void *addr)
{
+ unsigned long flags;
+
flush_kernel_dcache_page_asm(addr);
- purge_tlb_start();
+ purge_tlb_start(flags);
pdtlb_kernel(addr);
- purge_tlb_end();
+ purge_tlb_end(flags);
}
EXPORT_SYMBOL(flush_kernel_dcache_page_addr);
@@ -490,8 +494,10 @@
if (npages >= 512) /* 2MB of space: arbitrary, should be tuned */
flush_tlb_all();
else {
+ unsigned long flags;
+
mtsp(sid, 1);
- purge_tlb_start();
+ purge_tlb_start(flags);
if (split_tlb) {
while (npages--) {
pdtlb(start);
@@ -504,7 +510,7 @@
start += PAGE_SIZE;
}
}
- purge_tlb_end();
+ purge_tlb_end(flags);
}
}
diff --git a/arch/parisc/kernel/inventory.c b/arch/parisc/kernel/inventory.c
index bd1f7f1..d228d82 100644
--- a/arch/parisc/kernel/inventory.c
+++ b/arch/parisc/kernel/inventory.c
@@ -170,23 +170,27 @@
static int __init
pat_query_module(ulong pcell_loc, ulong mod_index)
{
- pdc_pat_cell_mod_maddr_block_t pa_pdc_cell;
+ pdc_pat_cell_mod_maddr_block_t *pa_pdc_cell;
unsigned long bytecnt;
unsigned long temp; /* 64-bit scratch value */
long status; /* PDC return value status */
struct parisc_device *dev;
+ pa_pdc_cell = kmalloc(sizeof (*pa_pdc_cell), GFP_KERNEL);
+ if (!pa_pdc_cell)
+ panic("couldn't allocate memory for PDC_PAT_CELL!");
+
/* return cell module (PA or Processor view) */
status = pdc_pat_cell_module(&bytecnt, pcell_loc, mod_index,
- PA_VIEW, &pa_pdc_cell);
+ PA_VIEW, pa_pdc_cell);
if (status != PDC_OK) {
/* no more cell modules or error */
return status;
}
- temp = pa_pdc_cell.cba;
- dev = alloc_pa_dev(PAT_GET_CBA(temp), &pa_pdc_cell.mod_path);
+ temp = pa_pdc_cell->cba;
+ dev = alloc_pa_dev(PAT_GET_CBA(temp), &(pa_pdc_cell->mod_path));
if (!dev) {
return PDC_OK;
}
@@ -203,8 +207,8 @@
/* save generic info returned from the call */
/* REVISIT: who is the consumer of this? not sure yet... */
- dev->mod_info = pa_pdc_cell.mod_info; /* pass to PAT_GET_ENTITY() */
- dev->pmod_loc = pa_pdc_cell.mod_location;
+ dev->mod_info = pa_pdc_cell->mod_info; /* pass to PAT_GET_ENTITY() */
+ dev->pmod_loc = pa_pdc_cell->mod_location;
register_parisc_device(dev); /* advertise device */
@@ -216,14 +220,14 @@
case PAT_ENTITY_PROC:
printk(KERN_DEBUG "PAT_ENTITY_PROC: id_eid 0x%lx\n",
- pa_pdc_cell.mod[0]);
+ pa_pdc_cell->mod[0]);
break;
case PAT_ENTITY_MEM:
printk(KERN_DEBUG
"PAT_ENTITY_MEM: amount 0x%lx min_gni_base 0x%lx min_gni_len 0x%lx\n",
- pa_pdc_cell.mod[0], pa_pdc_cell.mod[1],
- pa_pdc_cell.mod[2]);
+ pa_pdc_cell->mod[0], pa_pdc_cell->mod[1],
+ pa_pdc_cell->mod[2]);
break;
case PAT_ENTITY_CA:
printk(KERN_DEBUG "PAT_ENTITY_CA: %ld\n", pcell_loc);
@@ -243,23 +247,26 @@
print_ranges:
pdc_pat_cell_module(&bytecnt, pcell_loc, mod_index,
IO_VIEW, &io_pdc_cell);
- printk(KERN_DEBUG "ranges %ld\n", pa_pdc_cell.mod[1]);
- for (i = 0; i < pa_pdc_cell.mod[1]; i++) {
+ printk(KERN_DEBUG "ranges %ld\n", pa_pdc_cell->mod[1]);
+ for (i = 0; i < pa_pdc_cell->mod[1]; i++) {
printk(KERN_DEBUG
" PA_VIEW %ld: 0x%016lx 0x%016lx 0x%016lx\n",
- i, pa_pdc_cell.mod[2 + i * 3], /* type */
- pa_pdc_cell.mod[3 + i * 3], /* start */
- pa_pdc_cell.mod[4 + i * 3]); /* finish (ie end) */
+ i, pa_pdc_cell->mod[2 + i * 3], /* type */
+ pa_pdc_cell->mod[3 + i * 3], /* start */
+ pa_pdc_cell->mod[4 + i * 3]); /* finish (ie end) */
printk(KERN_DEBUG
" IO_VIEW %ld: 0x%016lx 0x%016lx 0x%016lx\n",
- i, io_pdc_cell.mod[2 + i * 3], /* type */
- io_pdc_cell.mod[3 + i * 3], /* start */
- io_pdc_cell.mod[4 + i * 3]); /* finish (ie end) */
+ i, io_pdc_cell->mod[2 + i * 3], /* type */
+ io_pdc_cell->mod[3 + i * 3], /* start */
+ io_pdc_cell->mod[4 + i * 3]); /* finish (ie end) */
}
printk(KERN_DEBUG "\n");
break;
}
#endif /* DEBUG_PAT */
+
+ kfree(pa_pdc_cell);
+
return PDC_OK;
}
diff --git a/arch/parisc/kernel/irq.c b/arch/parisc/kernel/irq.c
index 8007f1e..330f536 100644
--- a/arch/parisc/kernel/irq.c
+++ b/arch/parisc/kernel/irq.c
@@ -120,7 +120,7 @@
if (CHECK_IRQ_PER_CPU(irq)) {
/* Bad linux design decision. The mask has already
* been set; we must reset it */
- cpumask_setall(&irq_desc[irq].affinity);
+ cpumask_setall(irq_desc[irq].affinity);
return -EINVAL;
}
@@ -138,13 +138,13 @@
if (cpu_dest < 0)
return -1;
- cpumask_copy(&irq_desc[irq].affinity, dest);
+ cpumask_copy(irq_desc[irq].affinity, dest);
return 0;
}
#endif
-static struct hw_interrupt_type cpu_interrupt_type = {
+static struct irq_chip cpu_interrupt_type = {
.typename = "CPU",
.startup = cpu_startup_irq,
.shutdown = cpu_disable_irq,
@@ -299,7 +299,7 @@
unsigned long txn_affinity_addr(unsigned int irq, int cpu)
{
#ifdef CONFIG_SMP
- cpumask_copy(&irq_desc[irq].affinity, cpumask_of(cpu));
+ cpumask_copy(irq_desc[irq].affinity, cpumask_of(cpu));
#endif
return per_cpu(cpu_data, cpu).txn_addr;
@@ -356,7 +356,7 @@
irq = eirr_to_irq(eirr_val);
#ifdef CONFIG_SMP
- cpumask_copy(&dest, &irq_desc[irq].affinity);
+ cpumask_copy(&dest, irq_desc[irq].affinity);
if (CHECK_IRQ_PER_CPU(irq_desc[irq].status) &&
!cpu_isset(smp_processor_id(), dest)) {
int cpu = first_cpu(dest);
diff --git a/arch/parisc/kernel/pci-dma.c b/arch/parisc/kernel/pci-dma.c
index 7d927ea..c07f618 100644
--- a/arch/parisc/kernel/pci-dma.c
+++ b/arch/parisc/kernel/pci-dma.c
@@ -90,12 +90,14 @@
if (end > PMD_SIZE)
end = PMD_SIZE;
do {
+ unsigned long flags;
+
if (!pte_none(*pte))
printk(KERN_ERR "map_pte_uncached: page already exists\n");
set_pte(pte, __mk_pte(*paddr_ptr, PAGE_KERNEL_UNC));
- purge_tlb_start();
+ purge_tlb_start(flags);
pdtlb_kernel(orig_vaddr);
- purge_tlb_end();
+ purge_tlb_end(flags);
vaddr += PAGE_SIZE;
orig_vaddr += PAGE_SIZE;
(*paddr_ptr) += PAGE_SIZE;
@@ -168,11 +170,13 @@
if (end > PMD_SIZE)
end = PMD_SIZE;
do {
+ unsigned long flags;
pte_t page = *pte;
+
pte_clear(&init_mm, vaddr, pte);
- purge_tlb_start();
+ purge_tlb_start(flags);
pdtlb_kernel(orig_vaddr);
- purge_tlb_end();
+ purge_tlb_end(flags);
vaddr += PAGE_SIZE;
orig_vaddr += PAGE_SIZE;
pte++;
diff --git a/arch/parisc/kernel/pci.c b/arch/parisc/kernel/pci.c
index 6936386..f7064ab 100644
--- a/arch/parisc/kernel/pci.c
+++ b/arch/parisc/kernel/pci.c
@@ -1,5 +1,4 @@
-/* $Id: pci.c,v 1.6 2000/01/29 00:12:05 grundler Exp $
- *
+/*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
diff --git a/arch/parisc/kernel/process.c b/arch/parisc/kernel/process.c
index 61c0707..1f3aa8d 100644
--- a/arch/parisc/kernel/process.c
+++ b/arch/parisc/kernel/process.c
@@ -156,7 +156,7 @@
* software. The user has to press the button himself. */
printk(KERN_EMERG "System shut down completed.\n"
- KERN_EMERG "Please power this system off now.");
+ "Please power this system off now.");
}
void (*pm_power_off)(void) = machine_power_off;
diff --git a/arch/parisc/kernel/processor.c b/arch/parisc/kernel/processor.c
index e09d0f7..c8fb61e 100644
--- a/arch/parisc/kernel/processor.c
+++ b/arch/parisc/kernel/processor.c
@@ -1,5 +1,4 @@
-/* $Id: processor.c,v 1.1 2002/07/20 16:27:06 rhirst Exp $
- *
+/*
* Initial setup-routines for HP 9000 based hardware.
*
* Copyright (C) 1991, 1992, 1995 Linus Torvalds
@@ -121,22 +120,28 @@
if (is_pdc_pat()) {
ulong status;
unsigned long bytecnt;
- pdc_pat_cell_mod_maddr_block_t pa_pdc_cell;
+ pdc_pat_cell_mod_maddr_block_t *pa_pdc_cell;
#undef USE_PAT_CPUID
#ifdef USE_PAT_CPUID
struct pdc_pat_cpu_num cpu_info;
#endif
+ pa_pdc_cell = kmalloc(sizeof (*pa_pdc_cell), GFP_KERNEL);
+ if (!pa_pdc_cell)
+ panic("couldn't allocate memory for PDC_PAT_CELL!");
+
status = pdc_pat_cell_module(&bytecnt, dev->pcell_loc,
- dev->mod_index, PA_VIEW, &pa_pdc_cell);
+ dev->mod_index, PA_VIEW, pa_pdc_cell);
BUG_ON(PDC_OK != status);
/* verify it's the same as what do_pat_inventory() found */
- BUG_ON(dev->mod_info != pa_pdc_cell.mod_info);
- BUG_ON(dev->pmod_loc != pa_pdc_cell.mod_location);
+ BUG_ON(dev->mod_info != pa_pdc_cell->mod_info);
+ BUG_ON(dev->pmod_loc != pa_pdc_cell->mod_location);
- txn_addr = pa_pdc_cell.mod[0]; /* id_eid for IO sapic */
+ txn_addr = pa_pdc_cell->mod[0]; /* id_eid for IO sapic */
+
+ kfree(pa_pdc_cell);
#ifdef USE_PAT_CPUID
/* We need contiguous numbers for cpuid. Firmware's notion
diff --git a/arch/parisc/kernel/setup.c b/arch/parisc/kernel/setup.c
index 82131ca..cb71f3d 100644
--- a/arch/parisc/kernel/setup.c
+++ b/arch/parisc/kernel/setup.c
@@ -1,5 +1,4 @@
-/* $Id: setup.c,v 1.8 2000/02/02 04:42:38 prumpf Exp $
- *
+/*
* Initial setup-routines for HP 9000 based hardware.
*
* Copyright (C) 1991, 1992, 1995 Linus Torvalds
diff --git a/arch/parisc/kernel/sys_parisc32.c b/arch/parisc/kernel/sys_parisc32.c
index 1adb40c..92a0aca 100644
--- a/arch/parisc/kernel/sys_parisc32.c
+++ b/arch/parisc/kernel/sys_parisc32.c
@@ -174,68 +174,6 @@
return ret;
}
-/*** copied from mips64 ***/
-/*
- * Ooo, nasty. We need here to frob 32-bit unsigned longs to
- * 64-bit unsigned longs.
- */
-
-static inline int
-get_fd_set32(unsigned long n, u32 *ufdset, unsigned long *fdset)
-{
- n = (n + 8*sizeof(u32) - 1) / (8*sizeof(u32));
- if (ufdset) {
- unsigned long odd;
-
- if (!access_ok(VERIFY_WRITE, ufdset, n*sizeof(u32)))
- return -EFAULT;
-
- odd = n & 1UL;
- n &= ~1UL;
- while (n) {
- unsigned long h, l;
- __get_user(l, ufdset);
- __get_user(h, ufdset+1);
- ufdset += 2;
- *fdset++ = h << 32 | l;
- n -= 2;
- }
- if (odd)
- __get_user(*fdset, ufdset);
- } else {
- /* Tricky, must clear full unsigned long in the
- * kernel fdset at the end, this makes sure that
- * actually happens.
- */
- memset(fdset, 0, ((n + 1) & ~1)*sizeof(u32));
- }
- return 0;
-}
-
-static inline void
-set_fd_set32(unsigned long n, u32 *ufdset, unsigned long *fdset)
-{
- unsigned long odd;
- n = (n + 8*sizeof(u32) - 1) / (8*sizeof(u32));
-
- if (!ufdset)
- return;
-
- odd = n & 1UL;
- n &= ~1UL;
- while (n) {
- unsigned long h, l;
- l = *fdset++;
- h = l >> 32;
- __put_user(l, ufdset);
- __put_user(h, ufdset+1);
- ufdset += 2;
- n -= 2;
- }
- if (odd)
- __put_user(*fdset, ufdset);
-}
-
struct msgbuf32 {
int mtype;
char mtext[1];
diff --git a/arch/parisc/kernel/syscall_table.S b/arch/parisc/kernel/syscall_table.S
index 03b9a01..cf145eb 100644
--- a/arch/parisc/kernel/syscall_table.S
+++ b/arch/parisc/kernel/syscall_table.S
@@ -413,6 +413,10 @@
ENTRY_SAME(dup3)
ENTRY_SAME(pipe2)
ENTRY_SAME(inotify_init1)
+ ENTRY_COMP(preadv) /* 315 */
+ ENTRY_COMP(pwritev)
+ ENTRY_COMP(rt_tgsigqueueinfo)
+ ENTRY_SAME(perf_counter_open)
/* Nothing yet */
diff --git a/arch/parisc/kernel/time.c b/arch/parisc/kernel/time.c
index d4dd056..a79c6f9 100644
--- a/arch/parisc/kernel/time.c
+++ b/arch/parisc/kernel/time.c
@@ -56,9 +56,9 @@
*/
irqreturn_t __irq_entry timer_interrupt(int irq, void *dev_id)
{
- unsigned long now;
+ unsigned long now, now2;
unsigned long next_tick;
- unsigned long cycles_elapsed, ticks_elapsed;
+ unsigned long cycles_elapsed, ticks_elapsed = 1;
unsigned long cycles_remainder;
unsigned int cpu = smp_processor_id();
struct cpuinfo_parisc *cpuinfo = &per_cpu(cpu_data, cpu);
@@ -71,44 +71,24 @@
/* Initialize next_tick to the expected tick time. */
next_tick = cpuinfo->it_value;
- /* Get current interval timer.
- * CR16 reads as 64 bits in CPU wide mode.
- * CR16 reads as 32 bits in CPU narrow mode.
- */
+ /* Get current cycle counter (Control Register 16). */
now = mfctl(16);
cycles_elapsed = now - next_tick;
- if ((cycles_elapsed >> 5) < cpt) {
+ if ((cycles_elapsed >> 6) < cpt) {
/* use "cheap" math (add/subtract) instead
* of the more expensive div/mul method
*/
cycles_remainder = cycles_elapsed;
- ticks_elapsed = 1;
while (cycles_remainder > cpt) {
cycles_remainder -= cpt;
ticks_elapsed++;
}
} else {
+ /* TODO: Reduce this to one fdiv op */
cycles_remainder = cycles_elapsed % cpt;
- ticks_elapsed = 1 + cycles_elapsed / cpt;
- }
-
- /* Can we differentiate between "early CR16" (aka Scenario 1) and
- * "long delay" (aka Scenario 3)? I don't think so.
- *
- * We expected timer_interrupt to be delivered at least a few hundred
- * cycles after the IT fires. But it's arbitrary how much time passes
- * before we call it "late". I've picked one second.
- */
- if (unlikely(ticks_elapsed > HZ)) {
- /* Scenario 3: very long delay? bad in any case */
- printk (KERN_CRIT "timer_interrupt(CPU %d): delayed!"
- " cycles %lX rem %lX "
- " next/now %lX/%lX\n",
- cpu,
- cycles_elapsed, cycles_remainder,
- next_tick, now );
+ ticks_elapsed += cycles_elapsed / cpt;
}
/* convert from "division remainder" to "remainder of clock tick" */
@@ -122,18 +102,56 @@
cpuinfo->it_value = next_tick;
- /* Skip one clocktick on purpose if we are likely to miss next_tick.
- * We want to avoid the new next_tick being less than CR16.
- * If that happened, itimer wouldn't fire until CR16 wrapped.
- * We'll catch the tick we missed on the tick after that.
+ /* Program the IT when to deliver the next interrupt.
+ * Only bottom 32-bits of next_tick are writable in CR16!
*/
- if (!(cycles_remainder >> 13))
- next_tick += cpt;
-
- /* Program the IT when to deliver the next interrupt. */
- /* Only bottom 32-bits of next_tick are written to cr16. */
mtctl(next_tick, 16);
+ /* Skip one clocktick on purpose if we missed next_tick.
+ * The new CR16 must be "later" than current CR16 otherwise
+ * itimer would not fire until CR16 wrapped - e.g 4 seconds
+ * later on a 1Ghz processor. We'll account for the missed
+ * tick on the next timer interrupt.
+ *
+ * "next_tick - now" will always give the difference regardless
+ * if one or the other wrapped. If "now" is "bigger" we'll end up
+ * with a very large unsigned number.
+ */
+ now2 = mfctl(16);
+ if (next_tick - now2 > cpt)
+ mtctl(next_tick+cpt, 16);
+
+#if 1
+/*
+ * GGG: DEBUG code for how many cycles programming CR16 used.
+ */
+ if (unlikely(now2 - now > 0x3000)) /* 12K cycles */
+ printk (KERN_CRIT "timer_interrupt(CPU %d): SLOW! 0x%lx cycles!"
+ " cyc %lX rem %lX "
+ " next/now %lX/%lX\n",
+ cpu, now2 - now, cycles_elapsed, cycles_remainder,
+ next_tick, now );
+#endif
+
+ /* Can we differentiate between "early CR16" (aka Scenario 1) and
+ * "long delay" (aka Scenario 3)? I don't think so.
+ *
+ * Timer_interrupt will be delivered at least a few hundred cycles
+ * after the IT fires. But it's arbitrary how much time passes
+ * before we call it "late". I've picked one second.
+ *
+ * It's important NO printk's are between reading CR16 and
+ * setting up the next value. May introduce huge variance.
+ */
+ if (unlikely(ticks_elapsed > HZ)) {
+ /* Scenario 3: very long delay? bad in any case */
+ printk (KERN_CRIT "timer_interrupt(CPU %d): delayed!"
+ " cycles %lX rem %lX "
+ " next/now %lX/%lX\n",
+ cpu,
+ cycles_elapsed, cycles_remainder,
+ next_tick, now );
+ }
/* Done mucking with unreliable delivery of interrupts.
* Go do system house keeping.
@@ -173,7 +191,7 @@
/* clock source code */
-static cycle_t read_cr16(void)
+static cycle_t read_cr16(struct clocksource *cs)
{
return get_cycles();
}
diff --git a/arch/parisc/kernel/traps.c b/arch/parisc/kernel/traps.c
index c32f5d6..528f0ff 100644
--- a/arch/parisc/kernel/traps.c
+++ b/arch/parisc/kernel/traps.c
@@ -250,15 +250,14 @@
oops_enter();
/* Amuse the user in a SPARC fashion */
- if (err) printk(
-KERN_CRIT " _______________________________ \n"
-KERN_CRIT " < Your System ate a SPARC! Gah! >\n"
-KERN_CRIT " ------------------------------- \n"
-KERN_CRIT " \\ ^__^\n"
-KERN_CRIT " \\ (xx)\\_______\n"
-KERN_CRIT " (__)\\ )\\/\\\n"
-KERN_CRIT " U ||----w |\n"
-KERN_CRIT " || ||\n");
+ if (err) printk(KERN_CRIT
+ " _______________________________ \n"
+ " < Your System ate a SPARC! Gah! >\n"
+ " ------------------------------- \n"
+ " \\ ^__^\n"
+ " (__)\\ )\\/\\\n"
+ " U ||----w |\n"
+ " || ||\n");
/* unlock the pdc lock if necessary */
pdc_emergency_unlock();
@@ -797,7 +796,8 @@
else
printk(KERN_DEBUG "User Fault (long pointer) (fault %d) ",
code);
- printk("pid=%d command='%s'\n", task_pid_nr(current), current->comm);
+ printk(KERN_CONT "pid=%d command='%s'\n",
+ task_pid_nr(current), current->comm);
show_regs(regs);
#endif
si.si_signo = SIGSEGV;
diff --git a/arch/parisc/lib/checksum.c b/arch/parisc/lib/checksum.c
index 462696d..ae66d31 100644
--- a/arch/parisc/lib/checksum.c
+++ b/arch/parisc/lib/checksum.c
@@ -13,8 +13,6 @@
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
- *
- * $Id: checksum.c,v 1.3 1997/12/01 17:57:34 ralf Exp $
*/
#include <linux/module.h>
#include <linux/types.h>
diff --git a/arch/parisc/lib/memcpy.c b/arch/parisc/lib/memcpy.c
index bbda909..abf41f4 100644
--- a/arch/parisc/lib/memcpy.c
+++ b/arch/parisc/lib/memcpy.c
@@ -405,7 +405,7 @@
unaligned_copy:
/* possibly we are aligned on a word, but not on a double... */
- if (likely(t1 & (sizeof(unsigned int)-1)) == 0) {
+ if (likely((t1 & (sizeof(unsigned int)-1)) == 0)) {
t2 = src & (sizeof(unsigned int) - 1);
if (unlikely(t2 != 0)) {
diff --git a/arch/parisc/math-emu/decode_exc.c b/arch/parisc/math-emu/decode_exc.c
index 66c8a9f..3ca1c61 100644
--- a/arch/parisc/math-emu/decode_exc.c
+++ b/arch/parisc/math-emu/decode_exc.c
@@ -40,7 +40,7 @@
* END_DESC
*/
-
+#include <linux/kernel.h>
#include "float.h"
#include "sgl_float.h"
#include "dbl_float.h"
diff --git a/arch/parisc/mm/fault.c b/arch/parisc/mm/fault.c
index bfb6dd6..c6afbfc 100644
--- a/arch/parisc/mm/fault.c
+++ b/arch/parisc/mm/fault.c
@@ -1,5 +1,4 @@
-/* $Id: fault.c,v 1.5 2000/01/26 16:20:29 jsm Exp $
- *
+/*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
diff --git a/arch/parisc/mm/init.c b/arch/parisc/mm/init.c
index 4356ceb..b0831d9 100644
--- a/arch/parisc/mm/init.c
+++ b/arch/parisc/mm/init.c
@@ -370,34 +370,22 @@
void free_initmem(void)
{
- unsigned long addr, init_begin, init_end;
-
- printk(KERN_INFO "Freeing unused kernel memory: ");
+ unsigned long addr;
+ unsigned long init_begin = (unsigned long)__init_begin;
+ unsigned long init_end = (unsigned long)__init_end;
#ifdef CONFIG_DEBUG_KERNEL
/* Attempt to catch anyone trying to execute code here
* by filling the page with BRK insns.
- *
- * If we disable interrupts for all CPUs, then IPI stops working.
- * Kinda breaks the global cache flushing.
*/
- local_irq_disable();
-
- memset(__init_begin, 0x00,
- (unsigned long)__init_end - (unsigned long)__init_begin);
-
- flush_data_cache();
- asm volatile("sync" : : );
- flush_icache_range((unsigned long)__init_begin, (unsigned long)__init_end);
- asm volatile("sync" : : );
-
- local_irq_enable();
+ memset((void *)init_begin, 0x00, init_end - init_begin);
+ flush_icache_range(init_begin, init_end);
#endif
/* align __init_begin and __init_end to page size,
ignoring linker script where we might have tried to save RAM */
- init_begin = PAGE_ALIGN((unsigned long)(__init_begin));
- init_end = PAGE_ALIGN((unsigned long)(__init_end));
+ init_begin = PAGE_ALIGN(init_begin);
+ init_end = PAGE_ALIGN(init_end);
for (addr = init_begin; addr < init_end; addr += PAGE_SIZE) {
ClearPageReserved(virt_to_page(addr));
init_page_count(virt_to_page(addr));
@@ -409,7 +397,8 @@
/* set up a new led state on systems shipped LED State panel */
pdc_chassis_send_status(PDC_CHASSIS_DIRECT_BCOMPLETE);
- printk("%luk freed\n", (init_end - init_begin) >> 10);
+ printk(KERN_INFO "Freeing unused kernel memory: %luk freed\n",
+ (init_end - init_begin) >> 10);
}
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index bf6cedf..d00131c 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -62,7 +62,6 @@
config TRACE_IRQFLAGS_SUPPORT
bool
- depends on PPC64
default y
config LOCKDEP_SUPPORT
diff --git a/arch/powerpc/boot/.gitignore b/arch/powerpc/boot/.gitignore
index 2f50acd..3d80c3e 100644
--- a/arch/powerpc/boot/.gitignore
+++ b/arch/powerpc/boot/.gitignore
@@ -36,3 +36,13 @@
zconf.h
zlib.h
zutil.h
+fdt.c
+fdt.h
+fdt_ro.c
+fdt_rw.c
+fdt_strerror.c
+fdt_sw.c
+fdt_wip.c
+libfdt.h
+libfdt_internal.h
+
diff --git a/arch/powerpc/boot/dts/amigaone.dts b/arch/powerpc/boot/dts/amigaone.dts
index 26549fc..49ac36b 100644
--- a/arch/powerpc/boot/dts/amigaone.dts
+++ b/arch/powerpc/boot/dts/amigaone.dts
@@ -70,8 +70,8 @@
devsel-speed = <0x00000001>;
min-grant = <0>;
max-latency = <0>;
- /* First 64k for I/O at 0x0 on PCI mapped to 0x0 on ISA. */
- ranges = <0x00000001 0 0x01000000 0 0x00000000 0x00010000>;
+ /* First 4k for I/O at 0x0 on PCI mapped to 0x0 on ISA. */
+ ranges = <0x00000001 0 0x01000000 0 0x00000000 0x00001000>;
interrupt-parent = <&i8259>;
#interrupt-cells = <2>;
#address-cells = <2>;
diff --git a/arch/powerpc/boot/dts/mpc8569mds.dts b/arch/powerpc/boot/dts/mpc8569mds.dts
index a8dcb01..a680165 100644
--- a/arch/powerpc/boot/dts/mpc8569mds.dts
+++ b/arch/powerpc/boot/dts/mpc8569mds.dts
@@ -253,6 +253,7 @@
/* Filled in by U-Boot */
clock-frequency = <0>;
status = "disabled";
+ sdhci,1-bit-only;
};
crypto@30000 {
diff --git a/arch/powerpc/boot/dts/warp.dts b/arch/powerpc/boot/dts/warp.dts
index 01bfb56..31605ee 100644
--- a/arch/powerpc/boot/dts/warp.dts
+++ b/arch/powerpc/boot/dts/warp.dts
@@ -261,10 +261,11 @@
compatible = "gpio-leds";
green {
gpios = <&GPIO1 0 0>;
- default-state = "on";
+ default-state = "keep";
};
red {
gpios = <&GPIO1 1 0>;
+ default-state = "keep";
};
};
diff --git a/arch/powerpc/configs/44x/warp_defconfig b/arch/powerpc/configs/44x/warp_defconfig
index 3b77f09..787635f 100644
--- a/arch/powerpc/configs/44x/warp_defconfig
+++ b/arch/powerpc/configs/44x/warp_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Fri Jan 23 07:57:16 2009
+# Linux kernel version: 2.6.30
+# Tue Jun 9 23:35:36 2009
#
# CONFIG_PPC64 is not set
@@ -41,6 +41,7 @@
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_GPIO=y
# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
CONFIG_PPC=y
CONFIG_EARLY_PRINTK=y
@@ -53,10 +54,12 @@
# CONFIG_GENERIC_TBSYNC is not set
CONFIG_AUDIT_ARCH=y
CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
# CONFIG_DEFAULT_UIMAGE is not set
CONFIG_PPC_DCR_NATIVE=y
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_PPC_DCR=y
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
@@ -74,7 +77,17 @@
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_GROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
@@ -82,27 +95,29 @@
CONFIG_USER_SCHED=y
# CONFIG_CGROUP_SCHED is not set
# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
# CONFIG_RELAY is not set
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_HOTPLUG is not set
+# CONFIG_STRIP_ASM_SYMS is not set
+CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
@@ -110,10 +125,13 @@
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLAB=y
-# CONFIG_SLUB is not set
+CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
@@ -121,6 +139,7 @@
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
@@ -133,7 +152,6 @@
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
@@ -149,11 +167,6 @@
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
#
@@ -173,10 +186,11 @@
# CONFIG_ARCHES is not set
# CONFIG_CANYONLANDS is not set
# CONFIG_GLACIER is not set
+# CONFIG_REDWOOD is not set
# CONFIG_YOSEMITE is not set
# CONFIG_XILINX_VIRTEX440_GENERIC_BOARD is not set
# CONFIG_PPC44x_SIMPLE is not set
-# CONFIG_PPC4xx_GPIO is not set
+CONFIG_PPC4xx_GPIO=y
CONFIG_440EP=y
CONFIG_IBM440EP_ERR42=y
# CONFIG_IPIC is not set
@@ -235,9 +249,13 @@
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_STDBINUTILS=y
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
CONFIG_CMDLINE_BOOL=y
@@ -256,6 +274,7 @@
# CONFIG_PCI_DOMAINS is not set
# CONFIG_PCI_SYSCALL is not set
# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
# CONFIG_HAS_RAPIDIO is not set
#
@@ -271,14 +290,12 @@
CONFIG_KERNEL_START=0xc0000000
CONFIG_PHYSICAL_START=0x00000000
CONFIG_TASK_SIZE=0xc0000000
-CONFIG_CONSISTENT_START=0xff100000
CONFIG_CONSISTENT_SIZE=0x00200000
CONFIG_NET=y
#
# Networking options
#
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
@@ -353,6 +370,7 @@
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
@@ -365,7 +383,6 @@
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
# CONFIG_WIRELESS is not set
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
@@ -378,8 +395,12 @@
#
# Generic Driver Options
#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_STANDALONE is not set
CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_EXTRA_FIRMWARE=""
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
@@ -471,13 +492,21 @@
# LPDDR flash memory drivers
#
# CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
#
# UBI - Unsorted block images
#
-# CONFIG_MTD_UBI is not set
+CONFIG_MTD_UBI=y
+CONFIG_MTD_UBI_WL_THRESHOLD=4096
+CONFIG_MTD_UBI_BEB_RESERVE=1
+# CONFIG_MTD_UBI_GLUEBI is not set
+
+#
+# UBI debugging options
+#
+# CONFIG_MTD_UBI_DEBUG is not set
CONFIG_OF_DEVICE=y
+CONFIG_OF_GPIO=y
CONFIG_OF_I2C=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
@@ -495,10 +524,17 @@
# CONFIG_XILINX_SYSACE is not set
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_ISL29003 is not set
# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+CONFIG_EEPROM_AT24=y
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_93CX6 is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
@@ -529,7 +565,7 @@
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
+# CONFIG_SCSI_WAIT_SCAN is not set
#
# SCSI Transports
@@ -541,10 +577,12 @@
# CONFIG_SCSI_SRP_ATTRS is not set
# CONFIG_SCSI_LOWLEVEL is not set
# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
# CONFIG_ATA is not set
# CONFIG_MD is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
@@ -554,6 +592,8 @@
# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
CONFIG_IBM_NEW_EMAC=y
CONFIG_IBM_NEW_EMAC_RXB=128
CONFIG_IBM_NEW_EMAC_TXB=64
@@ -577,7 +617,6 @@
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -646,6 +685,7 @@
# CONFIG_HVC_UDBG is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
# CONFIG_NVRAM is not set
# CONFIG_GEN_RTC is not set
# CONFIG_R3964 is not set
@@ -663,6 +703,7 @@
#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
+# CONFIG_I2C_GPIO is not set
CONFIG_I2C_IBM_IIC=y
# CONFIG_I2C_MPC is not set
# CONFIG_I2C_OCORES is not set
@@ -685,12 +726,9 @@
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-CONFIG_EEPROM_AT24=y
-CONFIG_EEPROM_LEGACY=y
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
@@ -699,7 +737,30 @@
# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-# CONFIG_GPIOLIB is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+CONFIG_GPIO_SYSFS=y
+
+#
+# Memory mapped GPIO expanders:
+#
+# CONFIG_GPIO_XILINX is not set
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
@@ -721,6 +782,7 @@
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
@@ -735,11 +797,15 @@
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_SHT15 is not set
# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
@@ -785,6 +851,7 @@
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
@@ -870,11 +937,11 @@
# CONFIG_USB_TMC is not set
#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
#
-# see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
@@ -915,7 +982,6 @@
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
@@ -929,6 +995,8 @@
#
# OTG and related infrastructure
#
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
CONFIG_MMC=y
# CONFIG_MMC_DEBUG is not set
# CONFIG_MMC_UNSAFE_RESUME is not set
@@ -946,6 +1014,7 @@
#
# CONFIG_MMC_SDHCI is not set
# CONFIG_MMC_WBSD is not set
+CONFIG_MMC_PIKASD=y
# CONFIG_MEMSTICK is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
@@ -953,16 +1022,31 @@
#
# LED drivers
#
+CONFIG_LEDS_GPIO=y
+# CONFIG_LEDS_GPIO_PLATFORM is not set
+CONFIG_LEDS_GPIO_OF=y
+# CONFIG_LEDS_LP5521 is not set
# CONFIG_LEDS_PCA955X is not set
+# CONFIG_LEDS_BD2802 is not set
#
# LED Triggers
#
-# CONFIG_LEDS_TRIGGERS is not set
+CONFIG_LEDS_TRIGGERS=y
+# CONFIG_LEDS_TRIGGER_TIMER is not set
+# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
+# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
+# CONFIG_LEDS_TRIGGER_GPIO is not set
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
+
+#
+# iptables trigger is under Netfilter config (LED target)
+#
# CONFIG_ACCESSIBILITY is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
@@ -973,6 +1057,7 @@
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
# CONFIG_EXT3_FS_XATTR is not set
# CONFIG_EXT4_FS is not set
CONFIG_JBD=y
@@ -993,6 +1078,11 @@
# CONFIG_FUSE_FS is not set
#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
# CD-ROM/DVD Filesystems
#
# CONFIG_ISO9660_FS is not set
@@ -1039,6 +1129,12 @@
# CONFIG_JFFS2_LZO is not set
CONFIG_JFFS2_RTIME=y
# CONFIG_JFFS2_RUBIN is not set
+CONFIG_UBIFS_FS=y
+# CONFIG_UBIFS_FS_XATTR is not set
+# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set
+CONFIG_UBIFS_FS_LZO=y
+CONFIG_UBIFS_FS_ZLIB=y
+# CONFIG_UBIFS_FS_DEBUG is not set
CONFIG_CRAMFS=y
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
@@ -1049,6 +1145,7 @@
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
@@ -1060,7 +1157,6 @@
CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
@@ -1115,6 +1211,7 @@
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=y
# CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
@@ -1122,7 +1219,7 @@
CONFIG_BITREVERSE=y
CONFIG_GENERIC_FIND_LAST_BIT=y
CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
+CONFIG_CRC16=y
CONFIG_CRC_T10DIF=y
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
@@ -1130,16 +1227,19 @@
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
+CONFIG_LZO_COMPRESS=y
+CONFIG_LZO_DECOMPRESS=y
+CONFIG_DECOMPRESS_GZIP=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
#
# Kernel hacking
#
-# CONFIG_PRINTK_TIME is not set
+CONFIG_PRINTK_TIME=y
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
@@ -1152,11 +1252,15 @@
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
# CONFIG_SCHED_DEBUG is not set
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
@@ -1180,9 +1284,12 @@
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
#
# Tracers
@@ -1190,24 +1297,27 @@
# CONFIG_FUNCTION_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
# CONFIG_BOOT_TRACER is not set
# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_CODE_PATCHING_SELFTEST is not set
# CONFIG_FTR_FIXUP_SELFTEST is not set
# CONFIG_MSI_BITMAP_SELFTEST is not set
# CONFIG_XMON is not set
CONFIG_IRQSTACKS=y
# CONFIG_VIRQ_DEBUG is not set
-CONFIG_BDI_SWITCH=y
+# CONFIG_BDI_SWITCH is not set
# CONFIG_PPC_EARLY_DEBUG is not set
#
@@ -1223,6 +1333,8 @@
# Crypto core or helper
#
# CONFIG_CRYPTO_FIPS is not set
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
# CONFIG_CRYPTO_MANAGER is not set
# CONFIG_CRYPTO_MANAGER2 is not set
# CONFIG_CRYPTO_GF128MUL is not set
@@ -1294,13 +1406,15 @@
#
# Compression
#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_DEFLATE=y
+# CONFIG_CRYPTO_ZLIB is not set
+CONFIG_CRYPTO_LZO=y
#
# Random Number Generation
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_PPC4XX is not set
# CONFIG_PPC_CLOCK is not set
# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/include/asm/cpm1.h b/arch/powerpc/include/asm/cpm1.h
index 2ff79874..7685ffd 100644
--- a/arch/powerpc/include/asm/cpm1.h
+++ b/arch/powerpc/include/asm/cpm1.h
@@ -598,8 +598,6 @@
#define CICR_IEN ((uint)0x00000080) /* Int. enable */
#define CICR_SPS ((uint)0x00000001) /* SCC Spread */
-#define IMAP_ADDR (get_immrbase())
-
#define CPM_PIN_INPUT 0
#define CPM_PIN_OUTPUT 1
#define CPM_PIN_PRIMARY 0
diff --git a/arch/powerpc/include/asm/delay.h b/arch/powerpc/include/asm/delay.h
index 1e2eb41..52e4d54 100644
--- a/arch/powerpc/include/asm/delay.h
+++ b/arch/powerpc/include/asm/delay.h
@@ -63,6 +63,8 @@
udelay(delay); \
else \
cpu_relax(); \
+ if (!__ret) \
+ __ret = (condition); \
__ret; \
})
diff --git a/arch/powerpc/include/asm/dma-mapping.h b/arch/powerpc/include/asm/dma-mapping.h
index 3d9e887..b44aaab 100644
--- a/arch/powerpc/include/asm/dma-mapping.h
+++ b/arch/powerpc/include/asm/dma-mapping.h
@@ -309,7 +309,9 @@
struct dma_mapping_ops *dma_ops = get_dma_ops(dev);
BUG_ON(!dma_ops);
- dma_ops->sync_single_range_for_cpu(dev, dma_handle, 0,
+
+ if (dma_ops->sync_single_range_for_cpu)
+ dma_ops->sync_single_range_for_cpu(dev, dma_handle, 0,
size, direction);
}
@@ -320,7 +322,9 @@
struct dma_mapping_ops *dma_ops = get_dma_ops(dev);
BUG_ON(!dma_ops);
- dma_ops->sync_single_range_for_device(dev, dma_handle,
+
+ if (dma_ops->sync_single_range_for_device)
+ dma_ops->sync_single_range_for_device(dev, dma_handle,
0, size, direction);
}
@@ -331,7 +335,9 @@
struct dma_mapping_ops *dma_ops = get_dma_ops(dev);
BUG_ON(!dma_ops);
- dma_ops->sync_sg_for_cpu(dev, sgl, nents, direction);
+
+ if (dma_ops->sync_sg_for_cpu)
+ dma_ops->sync_sg_for_cpu(dev, sgl, nents, direction);
}
static inline void dma_sync_sg_for_device(struct device *dev,
@@ -341,7 +347,9 @@
struct dma_mapping_ops *dma_ops = get_dma_ops(dev);
BUG_ON(!dma_ops);
- dma_ops->sync_sg_for_device(dev, sgl, nents, direction);
+
+ if (dma_ops->sync_sg_for_device)
+ dma_ops->sync_sg_for_device(dev, sgl, nents, direction);
}
static inline void dma_sync_single_range_for_cpu(struct device *dev,
@@ -351,7 +359,9 @@
struct dma_mapping_ops *dma_ops = get_dma_ops(dev);
BUG_ON(!dma_ops);
- dma_ops->sync_single_range_for_cpu(dev, dma_handle,
+
+ if (dma_ops->sync_single_range_for_cpu)
+ dma_ops->sync_single_range_for_cpu(dev, dma_handle,
offset, size, direction);
}
@@ -362,7 +372,9 @@
struct dma_mapping_ops *dma_ops = get_dma_ops(dev);
BUG_ON(!dma_ops);
- dma_ops->sync_single_range_for_device(dev, dma_handle, offset,
+
+ if (dma_ops->sync_single_range_for_device)
+ dma_ops->sync_single_range_for_device(dev, dma_handle, offset,
size, direction);
}
#else /* CONFIG_PPC_NEED_DMA_SYNC_OPS */
diff --git a/arch/powerpc/include/asm/highmem.h b/arch/powerpc/include/asm/highmem.h
index 684a73f..a74c4ee 100644
--- a/arch/powerpc/include/asm/highmem.h
+++ b/arch/powerpc/include/asm/highmem.h
@@ -22,9 +22,7 @@
#ifdef __KERNEL__
-#include <linux/init.h>
#include <linux/interrupt.h>
-#include <linux/highmem.h>
#include <asm/kmap_types.h>
#include <asm/tlbflush.h>
#include <asm/page.h>
@@ -62,6 +60,9 @@
extern void *kmap_high(struct page *page);
extern void kunmap_high(struct page *page);
+extern void *kmap_atomic_prot(struct page *page, enum km_type type,
+ pgprot_t prot);
+extern void kunmap_atomic(void *kvaddr, enum km_type type);
static inline void *kmap(struct page *page)
{
@@ -79,62 +80,11 @@
kunmap_high(page);
}
-/*
- * The use of kmap_atomic/kunmap_atomic is discouraged - kmap/kunmap
- * gives a more generic (and caching) interface. But kmap_atomic can
- * be used in IRQ contexts, so in some (very limited) cases we need
- * it.
- */
-static inline void *kmap_atomic_prot(struct page *page, enum km_type type, pgprot_t prot)
-{
- unsigned int idx;
- unsigned long vaddr;
-
- /* even !CONFIG_PREEMPT needs this, for in_atomic in do_page_fault */
- pagefault_disable();
- if (!PageHighMem(page))
- return page_address(page);
-
- debug_kmap_atomic(type);
- idx = type + KM_TYPE_NR*smp_processor_id();
- vaddr = __fix_to_virt(FIX_KMAP_BEGIN + idx);
-#ifdef CONFIG_DEBUG_HIGHMEM
- BUG_ON(!pte_none(*(kmap_pte-idx)));
-#endif
- __set_pte_at(&init_mm, vaddr, kmap_pte-idx, mk_pte(page, prot), 1);
- local_flush_tlb_page(NULL, vaddr);
-
- return (void*) vaddr;
-}
-
static inline void *kmap_atomic(struct page *page, enum km_type type)
{
return kmap_atomic_prot(page, type, kmap_prot);
}
-static inline void kunmap_atomic(void *kvaddr, enum km_type type)
-{
-#ifdef CONFIG_DEBUG_HIGHMEM
- unsigned long vaddr = (unsigned long) kvaddr & PAGE_MASK;
- enum fixed_addresses idx = type + KM_TYPE_NR*smp_processor_id();
-
- if (vaddr < __fix_to_virt(FIX_KMAP_END)) {
- pagefault_enable();
- return;
- }
-
- BUG_ON(vaddr != __fix_to_virt(FIX_KMAP_BEGIN + idx));
-
- /*
- * force other mappings to Oops if they'll try to access
- * this pte without first remap it
- */
- pte_clear(&init_mm, vaddr, kmap_pte-idx);
- local_flush_tlb_page(NULL, vaddr);
-#endif
- pagefault_enable();
-}
-
static inline struct page *kmap_atomic_to_page(void *ptr)
{
unsigned long idx, vaddr = (unsigned long) ptr;
@@ -148,6 +98,7 @@
return pte_page(*pte);
}
+
#define flush_cache_kmaps() flush_cache_all()
#endif /* __KERNEL__ */
diff --git a/arch/powerpc/include/asm/hw_irq.h b/arch/powerpc/include/asm/hw_irq.h
index 867ab8e..8b505ea 100644
--- a/arch/powerpc/include/asm/hw_irq.h
+++ b/arch/powerpc/include/asm/hw_irq.h
@@ -68,13 +68,13 @@
#if defined(CONFIG_BOOKE)
#define SET_MSR_EE(x) mtmsr(x)
-#define local_irq_restore(flags) __asm__ __volatile__("wrtee %0" : : "r" (flags) : "memory")
+#define raw_local_irq_restore(flags) __asm__ __volatile__("wrtee %0" : : "r" (flags) : "memory")
#else
#define SET_MSR_EE(x) mtmsr(x)
-#define local_irq_restore(flags) mtmsr(flags)
+#define raw_local_irq_restore(flags) mtmsr(flags)
#endif
-static inline void local_irq_disable(void)
+static inline void raw_local_irq_disable(void)
{
#ifdef CONFIG_BOOKE
__asm__ __volatile__("wrteei 0": : :"memory");
@@ -86,7 +86,7 @@
#endif
}
-static inline void local_irq_enable(void)
+static inline void raw_local_irq_enable(void)
{
#ifdef CONFIG_BOOKE
__asm__ __volatile__("wrteei 1": : :"memory");
@@ -98,7 +98,7 @@
#endif
}
-static inline void local_irq_save_ptr(unsigned long *flags)
+static inline void raw_local_irq_save_ptr(unsigned long *flags)
{
unsigned long msr;
msr = mfmsr();
@@ -110,12 +110,12 @@
#endif
}
-#define local_save_flags(flags) ((flags) = mfmsr())
-#define local_irq_save(flags) local_irq_save_ptr(&flags)
-#define irqs_disabled() ((mfmsr() & MSR_EE) == 0)
+#define raw_local_save_flags(flags) ((flags) = mfmsr())
+#define raw_local_irq_save(flags) raw_local_irq_save_ptr(&flags)
+#define raw_irqs_disabled() ((mfmsr() & MSR_EE) == 0)
+#define raw_irqs_disabled_flags(flags) (((flags) & MSR_EE) == 0)
-#define hard_irq_enable() local_irq_enable()
-#define hard_irq_disable() local_irq_disable()
+#define hard_irq_disable() raw_local_irq_disable()
static inline int irqs_disabled_flags(unsigned long flags)
{
diff --git a/arch/powerpc/include/asm/perf_counter.h b/arch/powerpc/include/asm/perf_counter.h
index 8ccd4e1..0ea0639 100644
--- a/arch/powerpc/include/asm/perf_counter.h
+++ b/arch/powerpc/include/asm/perf_counter.h
@@ -61,6 +61,8 @@
extern unsigned long perf_misc_flags(struct pt_regs *regs);
extern unsigned long perf_instruction_pointer(struct pt_regs *regs);
+#define PERF_COUNTER_INDEX_OFFSET 1
+
/*
* Only override the default definitions in include/linux/perf_counter.h
* if we have hardware PMU support.
diff --git a/arch/powerpc/include/asm/pte-hash64-64k.h b/arch/powerpc/include/asm/pte-hash64-64k.h
index e05d26f..82b7220 100644
--- a/arch/powerpc/include/asm/pte-hash64-64k.h
+++ b/arch/powerpc/include/asm/pte-hash64-64k.h
@@ -47,7 +47,8 @@
* generic accessors and iterators here
*/
#define __real_pte(e,p) ((real_pte_t) { \
- (e), pte_val(*((p) + PTRS_PER_PTE)) })
+ (e), ((e) & _PAGE_COMBO) ? \
+ (pte_val(*((p) + PTRS_PER_PTE))) : 0 })
#define __rpte_to_hidx(r,index) ((pte_val((r).pte) & _PAGE_COMBO) ? \
(((r).hidx >> ((index)<<2)) & 0xf) : ((pte_val((r).pte) >> 12) & 0xf))
#define __rpte_to_pte(r) ((r).pte)
diff --git a/arch/powerpc/include/asm/rtas.h b/arch/powerpc/include/asm/rtas.h
index 01c1233..168fce7 100644
--- a/arch/powerpc/include/asm/rtas.h
+++ b/arch/powerpc/include/asm/rtas.h
@@ -58,7 +58,7 @@
unsigned long entry; /* physical address pointer */
unsigned long base; /* physical address pointer */
unsigned long size;
- spinlock_t lock;
+ raw_spinlock_t lock;
struct rtas_args args;
struct device_node *dev; /* virtual address pointer */
};
@@ -245,5 +245,8 @@
(devfn << 8) | (reg & 0xff);
}
+extern void __cpuinit rtas_give_timebase(void);
+extern void __cpuinit rtas_take_timebase(void);
+
#endif /* __KERNEL__ */
#endif /* _POWERPC_RTAS_H */
diff --git a/arch/powerpc/include/asm/thread_info.h b/arch/powerpc/include/asm/thread_info.h
index 9aba5a3..c8b3292 100644
--- a/arch/powerpc/include/asm/thread_info.h
+++ b/arch/powerpc/include/asm/thread_info.h
@@ -46,15 +46,13 @@
/*
* macros/functions for gaining access to the thread information structure
- *
- * preempt_count needs to be 1 initially, until the scheduler is functional.
*/
#define INIT_THREAD_INFO(tsk) \
{ \
.task = &tsk, \
.exec_domain = &default_exec_domain, \
.cpu = 0, \
- .preempt_count = 1, \
+ .preempt_count = INIT_PREEMPT_COUNT, \
.restart_block = { \
.fn = do_no_restart_syscall, \
}, \
diff --git a/arch/powerpc/kernel/entry_32.S b/arch/powerpc/kernel/entry_32.S
index 4dd38f1..3cadba6 100644
--- a/arch/powerpc/kernel/entry_32.S
+++ b/arch/powerpc/kernel/entry_32.S
@@ -191,11 +191,49 @@
mflr r9
lwz r11,0(r9) /* virtual address of handler */
lwz r9,4(r9) /* where to go when done */
+#ifdef CONFIG_TRACE_IRQFLAGS
+ lis r12,reenable_mmu@h
+ ori r12,r12,reenable_mmu@l
+ mtspr SPRN_SRR0,r12
+ mtspr SPRN_SRR1,r10
+ SYNC
+ RFI
+reenable_mmu: /* re-enable mmu so we can */
+ mfmsr r10
+ lwz r12,_MSR(r1)
+ xor r10,r10,r12
+ andi. r10,r10,MSR_EE /* Did EE change? */
+ beq 1f
+
+ /* Save handler and return address into the 2 unused words
+ * of the STACK_FRAME_OVERHEAD (sneak sneak sneak). Everything
+ * else can be recovered from the pt_regs except r3 which for
+ * normal interrupts has been set to pt_regs and for syscalls
+ * is an argument, so we temporarily use ORIG_GPR3 to save it
+ */
+ stw r9,8(r1)
+ stw r11,12(r1)
+ stw r3,ORIG_GPR3(r1)
+ bl trace_hardirqs_off
+ lwz r0,GPR0(r1)
+ lwz r3,ORIG_GPR3(r1)
+ lwz r4,GPR4(r1)
+ lwz r5,GPR5(r1)
+ lwz r6,GPR6(r1)
+ lwz r7,GPR7(r1)
+ lwz r8,GPR8(r1)
+ lwz r9,8(r1)
+ lwz r11,12(r1)
+1: mtctr r11
+ mtlr r9
+ bctr /* jump to handler */
+#else /* CONFIG_TRACE_IRQFLAGS */
mtspr SPRN_SRR0,r11
mtspr SPRN_SRR1,r10
mtlr r9
SYNC
RFI /* jump to handler, enable MMU */
+#endif /* CONFIG_TRACE_IRQFLAGS */
#if defined (CONFIG_6xx) || defined(CONFIG_E500)
4: rlwinm r12,r12,0,~_TLF_NAPPING
@@ -251,6 +289,31 @@
#ifdef SHOW_SYSCALLS
bl do_show_syscall
#endif /* SHOW_SYSCALLS */
+#ifdef CONFIG_TRACE_IRQFLAGS
+ /* Return from syscalls can (and generally will) hard enable
+ * interrupts. You aren't supposed to call a syscall with
+ * interrupts disabled in the first place. However, to ensure
+ * that we get it right vs. lockdep if it happens, we force
+ * that hard enable here with appropriate tracing if we see
+ * that we have been called with interrupts off
+ */
+ mfmsr r11
+ andi. r12,r11,MSR_EE
+ bne+ 1f
+ /* We came in with interrupts disabled, we enable them now */
+ bl trace_hardirqs_on
+ mfmsr r11
+ lwz r0,GPR0(r1)
+ lwz r3,GPR3(r1)
+ lwz r4,GPR4(r1)
+ ori r11,r11,MSR_EE
+ lwz r5,GPR5(r1)
+ lwz r6,GPR6(r1)
+ lwz r7,GPR7(r1)
+ lwz r8,GPR8(r1)
+ mtmsr r11
+1:
+#endif /* CONFIG_TRACE_IRQFLAGS */
rlwinm r10,r1,0,0,(31-THREAD_SHIFT) /* current_thread_info() */
lwz r11,TI_FLAGS(r10)
andi. r11,r11,_TIF_SYSCALL_T_OR_A
@@ -275,6 +338,7 @@
rlwinm r12,r1,0,0,(31-THREAD_SHIFT) /* current_thread_info() */
/* disable interrupts so current_thread_info()->flags can't change */
LOAD_MSR_KERNEL(r10,MSR_KERNEL) /* doesn't include MSR_EE */
+ /* Note: We don't bother telling lockdep about it */
SYNC
MTMSRD(r10)
lwz r9,TI_FLAGS(r12)
@@ -288,6 +352,19 @@
oris r11,r11,0x1000 /* Set SO bit in CR */
stw r11,_CCR(r1)
syscall_exit_cont:
+ lwz r8,_MSR(r1)
+#ifdef CONFIG_TRACE_IRQFLAGS
+ /* If we are going to return from the syscall with interrupts
+ * off, we trace that here. It shouldn't happen though but we
+ * want to catch the bugger if it does right ?
+ */
+ andi. r10,r8,MSR_EE
+ bne+ 1f
+ stw r3,GPR3(r1)
+ bl trace_hardirqs_off
+ lwz r3,GPR3(r1)
+1:
+#endif /* CONFIG_TRACE_IRQFLAGS */
#if defined(CONFIG_4xx) || defined(CONFIG_BOOKE)
/* If the process has its own DBCR0 value, load it up. The internal
debug mode bit tells us that dbcr0 should be loaded. */
@@ -311,7 +388,6 @@
mtlr r4
mtcr r5
lwz r7,_NIP(r1)
- lwz r8,_MSR(r1)
FIX_SRR1(r8, r0)
lwz r2,GPR2(r1)
lwz r1,GPR1(r1)
@@ -394,7 +470,9 @@
andi. r0,r9,(_TIF_SYSCALL_T_OR_A|_TIF_SINGLESTEP)
beq ret_from_except
- /* Re-enable interrupts */
+ /* Re-enable interrupts. There is no need to trace that with
+ * lockdep as we are supposed to have IRQs on at this point
+ */
ori r10,r10,MSR_EE
SYNC
MTMSRD(r10)
@@ -705,6 +783,7 @@
/* Hard-disable interrupts so that current_thread_info()->flags
* can't change between when we test it and when we return
* from the interrupt. */
+ /* Note: We don't bother telling lockdep about it */
LOAD_MSR_KERNEL(r10,MSR_KERNEL)
SYNC /* Some chip revs have problems here... */
MTMSRD(r10) /* disable interrupts */
@@ -744,11 +823,24 @@
beq+ restore
andi. r0,r3,MSR_EE /* interrupts off? */
beq restore /* don't schedule if so */
+#ifdef CONFIG_TRACE_IRQFLAGS
+ /* Lockdep thinks irqs are enabled, we need to call
+ * preempt_schedule_irq with IRQs off, so we inform lockdep
+ * now that we -did- turn them off already
+ */
+ bl trace_hardirqs_off
+#endif
1: bl preempt_schedule_irq
rlwinm r9,r1,0,0,(31-THREAD_SHIFT)
lwz r3,TI_FLAGS(r9)
andi. r0,r3,_TIF_NEED_RESCHED
bne- 1b
+#ifdef CONFIG_TRACE_IRQFLAGS
+ /* And now, to properly rebalance the above, we tell lockdep they
+ * are being turned back on, which will happen when we return
+ */
+ bl trace_hardirqs_on
+#endif
#else
resume_kernel:
#endif /* CONFIG_PREEMPT */
@@ -765,6 +857,28 @@
stw r6,icache_44x_need_flush@l(r4)
1:
#endif /* CONFIG_44x */
+
+ lwz r9,_MSR(r1)
+#ifdef CONFIG_TRACE_IRQFLAGS
+ /* Lockdep doesn't know about the fact that IRQs are temporarily turned
+ * off in this assembly code while peeking at TI_FLAGS() and such. However
+ * we need to inform it if the exception turned interrupts off, and we
+ * are about to trun them back on.
+ *
+ * The problem here sadly is that we don't know whether the exceptions was
+ * one that turned interrupts off or not. So we always tell lockdep about
+ * turning them on here when we go back to wherever we came from with EE
+ * on, even if that may meen some redudant calls being tracked. Maybe later
+ * we could encode what the exception did somewhere or test the exception
+ * type in the pt_regs but that sounds overkill
+ */
+ andi. r10,r9,MSR_EE
+ beq 1f
+ bl trace_hardirqs_on
+ lwz r9,_MSR(r1)
+1:
+#endif /* CONFIG_TRACE_IRQFLAGS */
+
lwz r0,GPR0(r1)
lwz r2,GPR2(r1)
REST_4GPRS(3, r1)
@@ -782,7 +896,6 @@
stwcx. r0,0,r1 /* to clear the reservation */
#if !(defined(CONFIG_4xx) || defined(CONFIG_BOOKE))
- lwz r9,_MSR(r1)
andi. r10,r9,MSR_RI /* check if this exception occurred */
beql nonrecoverable /* at a bad place (MSR:RI = 0) */
@@ -805,7 +918,6 @@
MTMSRD(r10) /* clear the RI bit */
.globl exc_exit_restart
exc_exit_restart:
- lwz r9,_MSR(r1)
lwz r12,_NIP(r1)
FIX_SRR1(r9,r10)
mtspr SPRN_SRR0,r12
@@ -1035,11 +1147,18 @@
beq do_user_signal
do_resched: /* r10 contains MSR_KERNEL here */
+ /* Note: We don't need to inform lockdep that we are enabling
+ * interrupts here. As far as it knows, they are already enabled
+ */
ori r10,r10,MSR_EE
SYNC
MTMSRD(r10) /* hard-enable interrupts */
bl schedule
recheck:
+ /* Note: And we don't tell it we are disabling them again
+ * neither. Those disable/enable cycles used to peek at
+ * TI_FLAGS aren't advertised.
+ */
LOAD_MSR_KERNEL(r10,MSR_KERNEL)
SYNC
MTMSRD(r10) /* disable interrupts */
diff --git a/arch/powerpc/kernel/head_32.S b/arch/powerpc/kernel/head_32.S
index 4846946..fc21329 100644
--- a/arch/powerpc/kernel/head_32.S
+++ b/arch/powerpc/kernel/head_32.S
@@ -1124,9 +1124,8 @@
RFI
/*
- * Use the first pair of BAT registers to map the 1st 16MB
- * of RAM to PAGE_OFFSET. From this point on we can't safely
- * call OF any more.
+ * On 601, we use 3 BATs to map up to 24M of RAM at _PAGE_OFFSET
+ * (we keep one for debugging) and on others, we use one 256M BAT.
*/
initial_bats:
lis r11,PAGE_OFFSET@h
@@ -1136,12 +1135,16 @@
bne 4f
ori r11,r11,4 /* set up BAT registers for 601 */
li r8,0x7f /* valid, block length = 8MB */
- oris r9,r11,0x800000@h /* set up BAT reg for 2nd 8M */
- oris r10,r8,0x800000@h /* set up BAT reg for 2nd 8M */
mtspr SPRN_IBAT0U,r11 /* N.B. 601 has valid bit in */
mtspr SPRN_IBAT0L,r8 /* lower BAT register */
- mtspr SPRN_IBAT1U,r9
- mtspr SPRN_IBAT1L,r10
+ addis r11,r11,0x800000@h
+ addis r8,r8,0x800000@h
+ mtspr SPRN_IBAT1U,r11
+ mtspr SPRN_IBAT1L,r8
+ addis r11,r11,0x800000@h
+ addis r8,r8,0x800000@h
+ mtspr SPRN_IBAT2U,r11
+ mtspr SPRN_IBAT2L,r8
isync
blr
diff --git a/arch/powerpc/kernel/mpc7450-pmu.c b/arch/powerpc/kernel/mpc7450-pmu.c
index 75ff47f..c244133 100644
--- a/arch/powerpc/kernel/mpc7450-pmu.c
+++ b/arch/powerpc/kernel/mpc7450-pmu.c
@@ -10,7 +10,6 @@
*/
#include <linux/string.h>
#include <linux/perf_counter.h>
-#include <linux/string.h>
#include <asm/reg.h>
#include <asm/cputable.h>
diff --git a/arch/powerpc/kernel/of_device.c b/arch/powerpc/kernel/of_device.c
index fa983a5..a359cb0 100644
--- a/arch/powerpc/kernel/of_device.c
+++ b/arch/powerpc/kernel/of_device.c
@@ -76,7 +76,7 @@
dev->dev.archdata.of_node = np;
if (bus_id)
- dev_set_name(&dev->dev, bus_id);
+ dev_set_name(&dev->dev, "%s", bus_id);
else
of_device_make_bus_id(dev);
diff --git a/arch/powerpc/kernel/power7-pmu.c b/arch/powerpc/kernel/power7-pmu.c
index 5d755ef..5a9f5cb 100644
--- a/arch/powerpc/kernel/power7-pmu.c
+++ b/arch/powerpc/kernel/power7-pmu.c
@@ -358,6 +358,7 @@
.get_constraint = power7_get_constraint,
.get_alternatives = power7_get_alternatives,
.disable_pmc = power7_disable_pmc,
+ .flags = PPMU_ALT_SIPR,
.n_generic = ARRAY_SIZE(power7_generic_events),
.generic_events = power7_generic_events,
.cache_events = &power7_cache_events,
diff --git a/arch/powerpc/kernel/ppc970-pmu.c b/arch/powerpc/kernel/ppc970-pmu.c
index 6637c87f..833097a 100644
--- a/arch/powerpc/kernel/ppc970-pmu.c
+++ b/arch/powerpc/kernel/ppc970-pmu.c
@@ -10,7 +10,6 @@
*/
#include <linux/string.h>
#include <linux/perf_counter.h>
-#include <linux/string.h>
#include <asm/reg.h>
#include <asm/cputable.h>
diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c
index 3e7135bb..892a9f2 100644
--- a/arch/powerpc/kernel/process.c
+++ b/arch/powerpc/kernel/process.c
@@ -528,7 +528,7 @@
for (i = 0; i < 32; i++) {
if ((i % REGS_PER_LINE) == 0)
- printk("\n" KERN_INFO "GPR%02d: ", i);
+ printk("\nGPR%02d: ", i);
printk(REG " ", regs->gpr[i]);
if (i == LAST_VOLATILE && !FULL_REGS(regs))
break;
diff --git a/arch/powerpc/kernel/ptrace32.c b/arch/powerpc/kernel/ptrace32.c
index 297632c..8a6daf4 100644
--- a/arch/powerpc/kernel/ptrace32.c
+++ b/arch/powerpc/kernel/ptrace32.c
@@ -21,7 +21,6 @@
#include <linux/sched.h>
#include <linux/mm.h>
#include <linux/smp.h>
-#include <linux/smp_lock.h>
#include <linux/errno.h>
#include <linux/ptrace.h>
#include <linux/regset.h>
diff --git a/arch/powerpc/kernel/rtas.c b/arch/powerpc/kernel/rtas.c
index ee4c760..c434823 100644
--- a/arch/powerpc/kernel/rtas.c
+++ b/arch/powerpc/kernel/rtas.c
@@ -38,9 +38,10 @@
#include <asm/syscalls.h>
#include <asm/smp.h>
#include <asm/atomic.h>
+#include <asm/time.h>
struct rtas_t rtas = {
- .lock = SPIN_LOCK_UNLOCKED
+ .lock = __RAW_SPIN_LOCK_UNLOCKED
};
EXPORT_SYMBOL(rtas);
@@ -67,6 +68,28 @@
void (*rtas_flash_term_hook)(int);
EXPORT_SYMBOL(rtas_flash_term_hook);
+/* RTAS use home made raw locking instead of spin_lock_irqsave
+ * because those can be called from within really nasty contexts
+ * such as having the timebase stopped which would lockup with
+ * normal locks and spinlock debugging enabled
+ */
+static unsigned long lock_rtas(void)
+{
+ unsigned long flags;
+
+ local_irq_save(flags);
+ preempt_disable();
+ __raw_spin_lock_flags(&rtas.lock, flags);
+ return flags;
+}
+
+static void unlock_rtas(unsigned long flags)
+{
+ __raw_spin_unlock(&rtas.lock);
+ local_irq_restore(flags);
+ preempt_enable();
+}
+
/*
* call_rtas_display_status and call_rtas_display_status_delay
* are designed only for very early low-level debugging, which
@@ -79,7 +102,7 @@
if (!rtas.base)
return;
- spin_lock_irqsave(&rtas.lock, s);
+ s = lock_rtas();
args->token = 10;
args->nargs = 1;
@@ -89,7 +112,7 @@
enter_rtas(__pa(args));
- spin_unlock_irqrestore(&rtas.lock, s);
+ unlock_rtas(s);
}
static void call_rtas_display_status_delay(char c)
@@ -411,8 +434,7 @@
if (!rtas.entry || token == RTAS_UNKNOWN_SERVICE)
return -1;
- /* Gotta do something different here, use global lock for now... */
- spin_lock_irqsave(&rtas.lock, s);
+ s = lock_rtas();
rtas_args = &rtas.args;
rtas_args->token = token;
@@ -439,8 +461,7 @@
outputs[i] = rtas_args->rets[i+1];
ret = (nret > 0)? rtas_args->rets[0]: 0;
- /* Gotta do something different here, use global lock for now... */
- spin_unlock_irqrestore(&rtas.lock, s);
+ unlock_rtas(s);
if (buff_copy) {
log_error(buff_copy, ERR_TYPE_RTAS_LOG, 0);
@@ -837,7 +858,7 @@
buff_copy = get_errorlog_buffer();
- spin_lock_irqsave(&rtas.lock, flags);
+ flags = lock_rtas();
rtas.args = args;
enter_rtas(__pa(&rtas.args));
@@ -848,7 +869,7 @@
if (args.rets[0] == -1)
errbuf = __fetch_rtas_last_error(buff_copy);
- spin_unlock_irqrestore(&rtas.lock, flags);
+ unlock_rtas(flags);
if (buff_copy) {
if (errbuf)
@@ -951,3 +972,33 @@
/* break now */
return 1;
}
+
+static raw_spinlock_t timebase_lock;
+static u64 timebase = 0;
+
+void __cpuinit rtas_give_timebase(void)
+{
+ unsigned long flags;
+
+ local_irq_save(flags);
+ hard_irq_disable();
+ __raw_spin_lock(&timebase_lock);
+ rtas_call(rtas_token("freeze-time-base"), 0, 1, NULL);
+ timebase = get_tb();
+ __raw_spin_unlock(&timebase_lock);
+
+ while (timebase)
+ barrier();
+ rtas_call(rtas_token("thaw-time-base"), 0, 1, NULL);
+ local_irq_restore(flags);
+}
+
+void __cpuinit rtas_take_timebase(void)
+{
+ while (!timebase)
+ barrier();
+ __raw_spin_lock(&timebase_lock);
+ set_tb(timebase >> 32, timebase & 0xffffffff);
+ timebase = 0;
+ __raw_spin_unlock(&timebase_lock);
+}
diff --git a/arch/powerpc/kernel/setup_32.c b/arch/powerpc/kernel/setup_32.c
index 1d15424..e1e3059 100644
--- a/arch/powerpc/kernel/setup_32.c
+++ b/arch/powerpc/kernel/setup_32.c
@@ -119,6 +119,8 @@
*/
notrace void __init machine_init(unsigned long dt_ptr)
{
+ lockdep_init();
+
/* Enable early debugging if any specified (see udbg.h) */
udbg_early_init();
diff --git a/arch/powerpc/kernel/smp.c b/arch/powerpc/kernel/smp.c
index 65484b2..0b47de0 100644
--- a/arch/powerpc/kernel/smp.c
+++ b/arch/powerpc/kernel/smp.c
@@ -68,7 +68,8 @@
/* SMP operations for this machine */
struct smp_ops_t *smp_ops;
-static volatile unsigned int cpu_callin_map[NR_CPUS];
+/* Can't be static due to PowerMac hackery */
+volatile unsigned int cpu_callin_map[NR_CPUS];
int smt_enabled_at_boot = 1;
diff --git a/arch/powerpc/kernel/udbg_16550.c b/arch/powerpc/kernel/udbg_16550.c
index 0362a89..acb74a1 100644
--- a/arch/powerpc/kernel/udbg_16550.c
+++ b/arch/powerpc/kernel/udbg_16550.c
@@ -219,7 +219,7 @@
#ifdef CONFIG_PPC_EARLY_DEBUG_44x
#include <platforms/44x/44x.h>
-static int udbg_44x_as1_flush(void)
+static void udbg_44x_as1_flush(void)
{
if (udbg_comport) {
while ((as1_readb(&udbg_comport->lsr) & LSR_THRE) == 0)
diff --git a/arch/powerpc/mm/Makefile b/arch/powerpc/mm/Makefile
index 2d2192e..3e68363 100644
--- a/arch/powerpc/mm/Makefile
+++ b/arch/powerpc/mm/Makefile
@@ -30,3 +30,4 @@
obj-$(CONFIG_HUGETLB_PAGE) += hugetlbpage.o
obj-$(CONFIG_PPC_SUBPAGE_PROT) += subpage-prot.o
obj-$(CONFIG_NOT_COHERENT_CACHE) += dma-noncoherent.o
+obj-$(CONFIG_HIGHMEM) += highmem.o
diff --git a/arch/powerpc/mm/gup.c b/arch/powerpc/mm/gup.c
index bc400c7..bc122a1 100644
--- a/arch/powerpc/mm/gup.c
+++ b/arch/powerpc/mm/gup.c
@@ -159,7 +159,7 @@
int psize;
#endif
- pr_debug("%s(%lx,%x,%s)\n", __func__, start, nr_pages, write ? "write" : "read");
+ pr_devel("%s(%lx,%x,%s)\n", __func__, start, nr_pages, write ? "write" : "read");
start &= PAGE_MASK;
addr = start;
@@ -170,7 +170,7 @@
start, len)))
goto slow_irqon;
- pr_debug(" aligned: %lx .. %lx\n", start, end);
+ pr_devel(" aligned: %lx .. %lx\n", start, end);
#ifdef CONFIG_HUGETLB_PAGE
/* We bail out on slice boundary crossing when hugetlb is
@@ -234,7 +234,7 @@
do {
VM_BUG_ON(shift != mmu_psize_defs[get_slice_psize(mm, a)].shift);
ptep = huge_pte_offset(mm, a);
- pr_debug(" %016lx: huge ptep %p\n", a, ptep);
+ pr_devel(" %016lx: huge ptep %p\n", a, ptep);
if (!ptep || !gup_huge_pte(ptep, hstate, &a, end, write, pages,
&nr))
goto slow;
@@ -249,7 +249,7 @@
#ifdef CONFIG_PPC64
VM_BUG_ON(shift != mmu_psize_defs[get_slice_psize(mm, addr)].shift);
#endif
- pr_debug(" %016lx: normal pgd %p\n", addr,
+ pr_devel(" %016lx: normal pgd %p\n", addr,
(void *)pgd_val(pgd));
next = pgd_addr_end(addr, end);
if (pgd_none(pgd))
@@ -269,7 +269,7 @@
slow:
local_irq_enable();
slow_irqon:
- pr_debug(" slow path ! nr = %d\n", nr);
+ pr_devel(" slow path ! nr = %d\n", nr);
/* Try to get the remaining pages with get_user_pages */
start += nr << PAGE_SHIFT;
diff --git a/arch/powerpc/mm/highmem.c b/arch/powerpc/mm/highmem.c
new file mode 100644
index 0000000..c2186c7
--- /dev/null
+++ b/arch/powerpc/mm/highmem.c
@@ -0,0 +1,77 @@
+/*
+ * highmem.c: virtual kernel memory mappings for high memory
+ *
+ * PowerPC version, stolen from the i386 version.
+ *
+ * Used in CONFIG_HIGHMEM systems for memory pages which
+ * are not addressable by direct kernel virtual addresses.
+ *
+ * Copyright (C) 1999 Gerhard Wichert, Siemens AG
+ * Gerhard.Wichert@pdb.siemens.de
+ *
+ *
+ * Redesigned the x86 32-bit VM architecture to deal with
+ * up to 16 Terrabyte physical memory. With current x86 CPUs
+ * we now support up to 64 Gigabytes physical RAM.
+ *
+ * Copyright (C) 1999 Ingo Molnar <mingo@redhat.com>
+ *
+ * Reworked for PowerPC by various contributors. Moved from
+ * highmem.h by Benjamin Herrenschmidt (c) 2009 IBM Corp.
+ */
+
+#include <linux/highmem.h>
+#include <linux/module.h>
+
+/*
+ * The use of kmap_atomic/kunmap_atomic is discouraged - kmap/kunmap
+ * gives a more generic (and caching) interface. But kmap_atomic can
+ * be used in IRQ contexts, so in some (very limited) cases we need
+ * it.
+ */
+void *kmap_atomic_prot(struct page *page, enum km_type type, pgprot_t prot)
+{
+ unsigned int idx;
+ unsigned long vaddr;
+
+ /* even !CONFIG_PREEMPT needs this, for in_atomic in do_page_fault */
+ pagefault_disable();
+ if (!PageHighMem(page))
+ return page_address(page);
+
+ debug_kmap_atomic(type);
+ idx = type + KM_TYPE_NR*smp_processor_id();
+ vaddr = __fix_to_virt(FIX_KMAP_BEGIN + idx);
+#ifdef CONFIG_DEBUG_HIGHMEM
+ BUG_ON(!pte_none(*(kmap_pte-idx)));
+#endif
+ __set_pte_at(&init_mm, vaddr, kmap_pte-idx, mk_pte(page, prot), 1);
+ local_flush_tlb_page(NULL, vaddr);
+
+ return (void*) vaddr;
+}
+EXPORT_SYMBOL(kmap_atomic_prot);
+
+void kunmap_atomic(void *kvaddr, enum km_type type)
+{
+#ifdef CONFIG_DEBUG_HIGHMEM
+ unsigned long vaddr = (unsigned long) kvaddr & PAGE_MASK;
+ enum fixed_addresses idx = type + KM_TYPE_NR*smp_processor_id();
+
+ if (vaddr < __fix_to_virt(FIX_KMAP_END)) {
+ pagefault_enable();
+ return;
+ }
+
+ BUG_ON(vaddr != __fix_to_virt(FIX_KMAP_BEGIN + idx));
+
+ /*
+ * force other mappings to Oops if they'll try to access
+ * this pte without first remap it
+ */
+ pte_clear(&init_mm, vaddr, kmap_pte-idx);
+ local_flush_tlb_page(NULL, vaddr);
+#endif
+ pagefault_enable();
+}
+EXPORT_SYMBOL(kunmap_atomic);
diff --git a/arch/powerpc/mm/mmu_context_nohash.c b/arch/powerpc/mm/mmu_context_nohash.c
index 8343986..92a1971 100644
--- a/arch/powerpc/mm/mmu_context_nohash.c
+++ b/arch/powerpc/mm/mmu_context_nohash.c
@@ -89,7 +89,7 @@
id = first_context;
continue;
}
- pr_debug("[%d] steal context %d from mm @%p\n",
+ pr_devel("[%d] steal context %d from mm @%p\n",
smp_processor_id(), id, mm);
/* Mark this mm has having no context anymore */
@@ -126,7 +126,7 @@
/* Pick up the victim mm */
mm = context_mm[id];
- pr_debug("[%d] steal context %d from mm @%p\n", cpu, id, mm);
+ pr_devel("[%d] steal context %d from mm @%p\n", cpu, id, mm);
/* Flush the TLB for that context */
local_flush_tlb_mm(mm);
@@ -180,7 +180,7 @@
spin_lock(&context_lock);
#ifndef DEBUG_STEAL_ONLY
- pr_debug("[%d] activating context for mm @%p, active=%d, id=%d\n",
+ pr_devel("[%d] activating context for mm @%p, active=%d, id=%d\n",
cpu, next, next->context.active, next->context.id);
#endif
@@ -189,7 +189,7 @@
next->context.active++;
if (prev) {
#ifndef DEBUG_STEAL_ONLY
- pr_debug(" old context %p active was: %d\n",
+ pr_devel(" old context %p active was: %d\n",
prev, prev->context.active);
#endif
WARN_ON(prev->context.active < 1);
@@ -236,7 +236,7 @@
next->context.id = id;
#ifndef DEBUG_STEAL_ONLY
- pr_debug("[%d] picked up new id %d, nrf is now %d\n",
+ pr_devel("[%d] picked up new id %d, nrf is now %d\n",
cpu, id, nr_free_contexts);
#endif
@@ -247,7 +247,7 @@
* local TLB for it and unmark it before we use it
*/
if (test_bit(id, stale_map[cpu])) {
- pr_debug("[%d] flushing stale context %d for mm @%p !\n",
+ pr_devel("[%d] flushing stale context %d for mm @%p !\n",
cpu, id, next);
local_flush_tlb_mm(next);
@@ -314,13 +314,13 @@
switch (action) {
case CPU_ONLINE:
case CPU_ONLINE_FROZEN:
- pr_debug("MMU: Allocating stale context map for CPU %d\n", cpu);
+ pr_devel("MMU: Allocating stale context map for CPU %d\n", cpu);
stale_map[cpu] = kzalloc(CTX_MAP_SIZE, GFP_KERNEL);
break;
#ifdef CONFIG_HOTPLUG_CPU
case CPU_DEAD:
case CPU_DEAD_FROZEN:
- pr_debug("MMU: Freeing stale context map for CPU %d\n", cpu);
+ pr_devel("MMU: Freeing stale context map for CPU %d\n", cpu);
kfree(stale_map[cpu]);
stale_map[cpu] = NULL;
break;
diff --git a/arch/powerpc/mm/pgtable.c b/arch/powerpc/mm/pgtable.c
index ae1d67c..627767d 100644
--- a/arch/powerpc/mm/pgtable.c
+++ b/arch/powerpc/mm/pgtable.c
@@ -129,12 +129,12 @@
page = pfn_to_page(pfn);
if (!PageReserved(page) && !test_bit(PG_arch_1, &page->flags)) {
- pr_debug("do_dcache_icache_coherency... flushing\n");
+ pr_devel("do_dcache_icache_coherency... flushing\n");
flush_dcache_icache_page(page);
set_bit(PG_arch_1, &page->flags);
}
else
- pr_debug("do_dcache_icache_coherency... already clean\n");
+ pr_devel("do_dcache_icache_coherency... already clean\n");
return __pte(pte_val(pte) | _PAGE_HWEXEC);
}
diff --git a/arch/powerpc/mm/slb.c b/arch/powerpc/mm/slb.c
index 3b52c80..5b7038f 100644
--- a/arch/powerpc/mm/slb.c
+++ b/arch/powerpc/mm/slb.c
@@ -14,8 +14,6 @@
* 2 of the License, or (at your option) any later version.
*/
-#undef DEBUG
-
#include <asm/pgtable.h>
#include <asm/mmu.h>
#include <asm/mmu_context.h>
@@ -27,11 +25,6 @@
#include <linux/compiler.h>
#include <asm/udbg.h>
-#ifdef DEBUG
-#define DBG(fmt...) printk(fmt)
-#else
-#define DBG pr_debug
-#endif
extern void slb_allocate_realmode(unsigned long ea);
extern void slb_allocate_user(unsigned long ea);
@@ -285,13 +278,13 @@
patch_slb_encoding(slb_compare_rr_to_size,
mmu_slb_size);
- DBG("SLB: linear LLP = %04lx\n", linear_llp);
- DBG("SLB: io LLP = %04lx\n", io_llp);
+ pr_devel("SLB: linear LLP = %04lx\n", linear_llp);
+ pr_devel("SLB: io LLP = %04lx\n", io_llp);
#ifdef CONFIG_SPARSEMEM_VMEMMAP
patch_slb_encoding(slb_miss_kernel_load_vmemmap,
SLB_VSID_KERNEL | vmemmap_llp);
- DBG("SLB: vmemmap LLP = %04lx\n", vmemmap_llp);
+ pr_devel("SLB: vmemmap LLP = %04lx\n", vmemmap_llp);
#endif
}
diff --git a/arch/powerpc/mm/tlb_hash64.c b/arch/powerpc/mm/tlb_hash64.c
index 1be1b5e..937eb90 100644
--- a/arch/powerpc/mm/tlb_hash64.c
+++ b/arch/powerpc/mm/tlb_hash64.c
@@ -72,7 +72,7 @@
*/
if (huge) {
#ifdef CONFIG_HUGETLB_PAGE
- psize = get_slice_psize(mm, addr);;
+ psize = get_slice_psize(mm, addr);
#else
BUG();
psize = pte_pagesize_index(mm, addr, pte); /* shutup gcc */
diff --git a/arch/powerpc/oprofile/cell/vma_map.c b/arch/powerpc/oprofile/cell/vma_map.c
index 258fa44..c591339 100644
--- a/arch/powerpc/oprofile/cell/vma_map.c
+++ b/arch/powerpc/oprofile/cell/vma_map.c
@@ -185,7 +185,7 @@
goto fail;
if (shdr_str.sh_type != SHT_STRTAB)
- goto fail;;
+ goto fail;
for (j = 0; j < shdr.sh_size / sizeof (sym); j++) {
if (copy_from_user(&sym, spu_elf_start +
diff --git a/arch/powerpc/platforms/44x/warp.c b/arch/powerpc/platforms/44x/warp.c
index 42e09a9..e5c1b09 100644
--- a/arch/powerpc/platforms/44x/warp.c
+++ b/arch/powerpc/platforms/44x/warp.c
@@ -16,6 +16,7 @@
#include <linux/interrupt.h>
#include <linux/delay.h>
#include <linux/of_gpio.h>
+#include <linux/of_i2c.h>
#include <asm/machdep.h>
#include <asm/prom.h>
@@ -63,9 +64,6 @@
};
-static u32 post_info;
-
-/* I am not sure this is the best place for this... */
static int __init warp_post_info(void)
{
struct device_node *np;
@@ -87,10 +85,9 @@
iounmap(fpga);
- if (post1 || post2) {
+ if (post1 || post2)
printk(KERN_INFO "Warp POST %08x %08x\n", post1, post2);
- post_info = 1;
- } else
+ else
printk(KERN_INFO "Warp POST OK\n");
return 0;
@@ -166,6 +163,9 @@
value ^= 1;
mdelay(500);
}
+
+ /* Not reached */
+ return IRQ_HANDLED;
}
static int pika_setup_leds(void)
@@ -179,24 +179,19 @@
}
for_each_child_of_node(np, child)
- if (strcmp(child->name, "green") == 0) {
+ if (strcmp(child->name, "green") == 0)
green_led = of_get_gpio(child, 0);
- /* Turn back on the green LED */
- gpio_set_value(green_led, 1);
- } else if (strcmp(child->name, "red") == 0) {
+ else if (strcmp(child->name, "red") == 0)
red_led = of_get_gpio(child, 0);
- /* Set based on post */
- gpio_set_value(red_led, post_info);
- }
of_node_put(np);
return 0;
}
-static void pika_setup_critical_temp(struct i2c_client *client)
+static void pika_setup_critical_temp(struct device_node *np,
+ struct i2c_client *client)
{
- struct device_node *np;
int irq, rc;
/* Do this before enabling critical temp interrupt since we
@@ -208,14 +203,7 @@
i2c_smbus_write_byte_data(client, 2, 65); /* Thigh */
i2c_smbus_write_byte_data(client, 3, 0); /* Tlow */
- np = of_find_compatible_node(NULL, NULL, "adi,ad7414");
- if (np == NULL) {
- printk(KERN_ERR __FILE__ ": Unable to find ad7414\n");
- return;
- }
-
irq = irq_of_parse_and_map(np, 0);
- of_node_put(np);
if (irq == NO_IRQ) {
printk(KERN_ERR __FILE__ ": Unable to get ad7414 irq\n");
return;
@@ -244,32 +232,24 @@
static int pika_dtm_thread(void __iomem *fpga)
{
- struct i2c_adapter *adap;
+ struct device_node *np;
struct i2c_client *client;
- /* We loop in case either driver was compiled as a module and
- * has not been insmoded yet.
- */
- while (!(adap = i2c_get_adapter(0))) {
- set_current_state(TASK_INTERRUPTIBLE);
- schedule_timeout(HZ);
+ np = of_find_compatible_node(NULL, NULL, "adi,ad7414");
+ if (np == NULL)
+ return -ENOENT;
+
+ client = of_find_i2c_device_by_node(np);
+ if (client == NULL) {
+ of_node_put(np);
+ return -ENOENT;
}
- while (1) {
- list_for_each_entry(client, &adap->clients, list)
- if (client->addr == 0x4a)
- goto found_it;
+ pika_setup_critical_temp(np, client);
- set_current_state(TASK_INTERRUPTIBLE);
- schedule_timeout(HZ);
- }
+ of_node_put(np);
-found_it:
- pika_setup_critical_temp(client);
-
- i2c_put_adapter(adap);
-
- printk(KERN_INFO "PIKA DTM thread running.\n");
+ printk(KERN_INFO "Warp DTM thread running.\n");
while (!kthread_should_stop()) {
int val;
@@ -291,7 +271,6 @@
return 0;
}
-
static int __init pika_dtm_start(void)
{
struct task_struct *dtm_thread;
diff --git a/arch/powerpc/platforms/82xx/pq2ads-pci-pic.c b/arch/powerpc/platforms/82xx/pq2ads-pci-pic.c
index ddf0bdc..7ee979f 100644
--- a/arch/powerpc/platforms/82xx/pq2ads-pci-pic.c
+++ b/arch/powerpc/platforms/82xx/pq2ads-pci-pic.c
@@ -147,7 +147,7 @@
goto out;
}
- priv = alloc_bootmem(sizeof(struct pq2ads_pci_pic));
+ priv = kzalloc(sizeof(*priv), GFP_KERNEL);
if (!priv) {
of_node_put(np);
ret = -ENOMEM;
diff --git a/arch/powerpc/platforms/85xx/mpc85xx_mds.c b/arch/powerpc/platforms/85xx/mpc85xx_mds.c
index 77f90b3..60ed9c0 100644
--- a/arch/powerpc/platforms/85xx/mpc85xx_mds.c
+++ b/arch/powerpc/platforms/85xx/mpc85xx_mds.c
@@ -285,6 +285,7 @@
{ .type = "qe", },
{ .compatible = "fsl,qe", },
{ .compatible = "gianfar", },
+ { .compatible = "fsl,rapidio-delta", },
{},
};
diff --git a/arch/powerpc/platforms/85xx/smp.c b/arch/powerpc/platforms/85xx/smp.c
index cc0b0db..62c592ede6 100644
--- a/arch/powerpc/platforms/85xx/smp.c
+++ b/arch/powerpc/platforms/85xx/smp.c
@@ -52,20 +52,19 @@
pr_debug("smp_85xx_kick_cpu: kick CPU #%d\n", nr);
- local_irq_save(flags);
-
np = of_get_cpu_node(nr, NULL);
cpu_rel_addr = of_get_property(np, "cpu-release-addr", NULL);
if (cpu_rel_addr == NULL) {
printk(KERN_ERR "No cpu-release-addr for cpu %d\n", nr);
- local_irq_restore(flags);
return;
}
/* Map the spin table */
bptr_vaddr = ioremap(*cpu_rel_addr, SIZE_BOOT_ENTRY);
+ local_irq_save(flags);
+
out_be32(bptr_vaddr + BOOT_ENTRY_PIR, nr);
out_be32(bptr_vaddr + BOOT_ENTRY_ADDR_LOWER, __pa(__early_start));
@@ -73,10 +72,10 @@
while ((__secondary_hold_acknowledge != nr) && (++n < 1000))
mdelay(1);
- iounmap(bptr_vaddr);
-
local_irq_restore(flags);
+ iounmap(bptr_vaddr);
+
pr_debug("waited %d msecs for CPU #%d.\n", n, nr);
}
diff --git a/arch/powerpc/platforms/85xx/socrates.c b/arch/powerpc/platforms/85xx/socrates.c
index d0e8443..747d8fb 100644
--- a/arch/powerpc/platforms/85xx/socrates.c
+++ b/arch/powerpc/platforms/85xx/socrates.c
@@ -102,10 +102,11 @@
{},
};
-static void __init socrates_init(void)
+static int __init socrates_publish_devices(void)
{
- of_platform_bus_probe(NULL, socrates_of_bus_ids, NULL);
+ return of_platform_bus_probe(NULL, socrates_of_bus_ids, NULL);
}
+machine_device_initcall(socrates, socrates_publish_devices);
/*
* Called very early, device-tree isn't unflattened
@@ -124,7 +125,6 @@
.name = "Socrates",
.probe = socrates_probe,
.setup_arch = socrates_setup_arch,
- .init = socrates_init,
.init_IRQ = socrates_pic_init,
.get_irq = mpic_get_irq,
.restart = fsl_rstcr_restart,
diff --git a/arch/powerpc/platforms/85xx/xes_mpc85xx.c b/arch/powerpc/platforms/85xx/xes_mpc85xx.c
index ee01532..1b42605 100644
--- a/arch/powerpc/platforms/85xx/xes_mpc85xx.c
+++ b/arch/powerpc/platforms/85xx/xes_mpc85xx.c
@@ -32,7 +32,6 @@
#include <sysdev/fsl_soc.h>
#include <sysdev/fsl_pci.h>
-#include <linux/of_platform.h>
/* A few bit definitions needed for fixups on some boards */
#define MPC85xx_L2CTL_L2E 0x80000000 /* L2 enable */
diff --git a/arch/powerpc/platforms/cell/axon_msi.c b/arch/powerpc/platforms/cell/axon_msi.c
index c71498d..aca5741 100644
--- a/arch/powerpc/platforms/cell/axon_msi.c
+++ b/arch/powerpc/platforms/cell/axon_msi.c
@@ -85,7 +85,7 @@
static void msic_dcr_write(struct axon_msic *msic, unsigned int dcr_n, u32 val)
{
- pr_debug("axon_msi: dcr_write(0x%x, 0x%x)\n", val, dcr_n);
+ pr_devel("axon_msi: dcr_write(0x%x, 0x%x)\n", val, dcr_n);
dcr_write(msic->dcr_host, dcr_n, val);
}
@@ -98,7 +98,7 @@
int retry = 0;
write_offset = dcr_read(msic->dcr_host, MSIC_WRITE_OFFSET_REG);
- pr_debug("axon_msi: original write_offset 0x%x\n", write_offset);
+ pr_devel("axon_msi: original write_offset 0x%x\n", write_offset);
/* write_offset doesn't wrap properly, so we have to mask it */
write_offset &= MSIC_FIFO_SIZE_MASK;
@@ -108,7 +108,7 @@
msi = le32_to_cpu(msic->fifo_virt[idx]);
msi &= 0xFFFF;
- pr_debug("axon_msi: woff %x roff %x msi %x\n",
+ pr_devel("axon_msi: woff %x roff %x msi %x\n",
write_offset, msic->read_offset, msi);
if (msi < NR_IRQS && irq_map[msi].host == msic->irq_host) {
@@ -123,12 +123,12 @@
*/
udelay(1);
retry++;
- pr_debug("axon_msi: invalid irq 0x%x!\n", msi);
+ pr_devel("axon_msi: invalid irq 0x%x!\n", msi);
continue;
}
if (retry) {
- pr_debug("axon_msi: late irq 0x%x, retry %d\n",
+ pr_devel("axon_msi: late irq 0x%x, retry %d\n",
msi, retry);
retry = 0;
}
@@ -332,7 +332,7 @@
struct axon_msic *msic = dev_get_drvdata(&device->dev);
u32 tmp;
- pr_debug("axon_msi: disabling %s\n",
+ pr_devel("axon_msi: disabling %s\n",
msic->irq_host->of_node->full_name);
tmp = dcr_read(msic->dcr_host, MSIC_CTRL_REG);
tmp &= ~MSIC_CTRL_ENABLE & ~MSIC_CTRL_IRQ_ENABLE;
@@ -349,7 +349,7 @@
unsigned int virq;
int dcr_base, dcr_len;
- pr_debug("axon_msi: setting up dn %s\n", dn->full_name);
+ pr_devel("axon_msi: setting up dn %s\n", dn->full_name);
msic = kzalloc(sizeof(struct axon_msic), GFP_KERNEL);
if (!msic) {
@@ -403,7 +403,7 @@
set_irq_data(virq, msic);
set_irq_chained_handler(virq, axon_msi_cascade);
- pr_debug("axon_msi: irq 0x%x setup for axon_msi\n", virq);
+ pr_devel("axon_msi: irq 0x%x setup for axon_msi\n", virq);
/* Enable the MSIC hardware */
msic_dcr_write(msic, MSIC_BASE_ADDR_HI_REG, msic->fifo_phys >> 32);
@@ -484,13 +484,13 @@
addr = of_translate_address(dn, of_get_property(dn, "reg", NULL));
if (addr == OF_BAD_ADDR) {
- pr_debug("axon_msi: couldn't translate reg property\n");
+ pr_devel("axon_msi: couldn't translate reg property\n");
return;
}
msic->trigger = ioremap(addr, 0x4);
if (!msic->trigger) {
- pr_debug("axon_msi: ioremap failed\n");
+ pr_devel("axon_msi: ioremap failed\n");
return;
}
@@ -498,7 +498,7 @@
if (!debugfs_create_file(name, 0600, powerpc_debugfs_root,
msic, &fops_msic)) {
- pr_debug("axon_msi: debugfs_create_file failed!\n");
+ pr_devel("axon_msi: debugfs_create_file failed!\n");
return;
}
}
diff --git a/arch/powerpc/platforms/cell/smp.c b/arch/powerpc/platforms/cell/smp.c
index 9046803..bc97fad 100644
--- a/arch/powerpc/platforms/cell/smp.c
+++ b/arch/powerpc/platforms/cell/smp.c
@@ -36,7 +36,6 @@
#include <asm/prom.h>
#include <asm/smp.h>
#include <asm/paca.h>
-#include <asm/time.h>
#include <asm/machdep.h>
#include <asm/cputable.h>
#include <asm/firmware.h>
@@ -140,31 +139,6 @@
mtspr(SPRN_DABRX, DABRX_KERNEL | DABRX_USER);
}
-static DEFINE_SPINLOCK(timebase_lock);
-static unsigned long timebase = 0;
-
-static void __devinit cell_give_timebase(void)
-{
- spin_lock(&timebase_lock);
- rtas_call(rtas_token("freeze-time-base"), 0, 1, NULL);
- timebase = get_tb();
- spin_unlock(&timebase_lock);
-
- while (timebase)
- barrier();
- rtas_call(rtas_token("thaw-time-base"), 0, 1, NULL);
-}
-
-static void __devinit cell_take_timebase(void)
-{
- while (!timebase)
- barrier();
- spin_lock(&timebase_lock);
- set_tb(timebase >> 32, timebase & 0xffffffff);
- timebase = 0;
- spin_unlock(&timebase_lock);
-}
-
static void __devinit smp_cell_kick_cpu(int nr)
{
BUG_ON(nr < 0 || nr >= NR_CPUS);
@@ -224,8 +198,8 @@
/* Non-lpar has additional take/give timebase */
if (rtas_token("freeze-time-base") != RTAS_UNKNOWN_SERVICE) {
- smp_ops->give_timebase = cell_give_timebase;
- smp_ops->take_timebase = cell_take_timebase;
+ smp_ops->give_timebase = rtas_give_timebase;
+ smp_ops->take_timebase = rtas_take_timebase;
}
DBG(" <- smp_init_cell()\n");
diff --git a/arch/powerpc/platforms/chrp/smp.c b/arch/powerpc/platforms/chrp/smp.c
index 10a4a4d..02cafec 100644
--- a/arch/powerpc/platforms/chrp/smp.c
+++ b/arch/powerpc/platforms/chrp/smp.c
@@ -26,7 +26,6 @@
#include <asm/io.h>
#include <asm/prom.h>
#include <asm/smp.h>
-#include <asm/time.h>
#include <asm/machdep.h>
#include <asm/mpic.h>
#include <asm/rtas.h>
@@ -42,40 +41,12 @@
mpic_setup_this_cpu();
}
-static DEFINE_SPINLOCK(timebase_lock);
-static unsigned int timebase_upper = 0, timebase_lower = 0;
-
-void __devinit smp_chrp_give_timebase(void)
-{
- spin_lock(&timebase_lock);
- rtas_call(rtas_token("freeze-time-base"), 0, 1, NULL);
- timebase_upper = get_tbu();
- timebase_lower = get_tbl();
- spin_unlock(&timebase_lock);
-
- while (timebase_upper || timebase_lower)
- barrier();
- rtas_call(rtas_token("thaw-time-base"), 0, 1, NULL);
-}
-
-void __devinit smp_chrp_take_timebase(void)
-{
- while (!(timebase_upper || timebase_lower))
- barrier();
- spin_lock(&timebase_lock);
- set_tb(timebase_upper, timebase_lower);
- timebase_upper = 0;
- timebase_lower = 0;
- spin_unlock(&timebase_lock);
- printk("CPU %i taken timebase\n", smp_processor_id());
-}
-
/* CHRP with openpic */
struct smp_ops_t chrp_smp_ops = {
.message_pass = smp_mpic_message_pass,
.probe = smp_mpic_probe,
.kick_cpu = smp_chrp_kick_cpu,
.setup_cpu = smp_chrp_setup_cpu,
- .give_timebase = smp_chrp_give_timebase,
- .take_timebase = smp_chrp_take_timebase,
+ .give_timebase = rtas_give_timebase,
+ .take_timebase = rtas_take_timebase,
};
diff --git a/arch/powerpc/platforms/pasemi/setup.c b/arch/powerpc/platforms/pasemi/setup.c
index 153051e..a461934 100644
--- a/arch/powerpc/platforms/pasemi/setup.c
+++ b/arch/powerpc/platforms/pasemi/setup.c
@@ -71,20 +71,25 @@
}
#ifdef CONFIG_SMP
-static DEFINE_SPINLOCK(timebase_lock);
+static raw_spinlock_t timebase_lock;
static unsigned long timebase;
static void __devinit pas_give_timebase(void)
{
- spin_lock(&timebase_lock);
+ unsigned long flags;
+
+ local_irq_save(flags);
+ hard_irq_disable();
+ __raw_spin_lock(&timebase_lock);
mtspr(SPRN_TBCTL, TBCTL_FREEZE);
isync();
timebase = get_tb();
- spin_unlock(&timebase_lock);
+ __raw_spin_unlock(&timebase_lock);
while (timebase)
barrier();
mtspr(SPRN_TBCTL, TBCTL_RESTART);
+ local_irq_restore(flags);
}
static void __devinit pas_take_timebase(void)
@@ -92,10 +97,10 @@
while (!timebase)
smp_rmb();
- spin_lock(&timebase_lock);
+ __raw_spin_lock(&timebase_lock);
set_tb(timebase >> 32, timebase & 0xffffffff);
timebase = 0;
- spin_unlock(&timebase_lock);
+ __raw_spin_unlock(&timebase_lock);
}
struct smp_ops_t pas_smp_ops = {
diff --git a/arch/powerpc/platforms/powermac/cpufreq_64.c b/arch/powerpc/platforms/powermac/cpufreq_64.c
index 22ecfbe..708c751 100644
--- a/arch/powerpc/platforms/powermac/cpufreq_64.c
+++ b/arch/powerpc/platforms/powermac/cpufreq_64.c
@@ -251,7 +251,7 @@
static struct pmf_function *pfunc_cpu_setfreq_high;
static struct pmf_function *pfunc_cpu_setfreq_low;
static struct pmf_function *pfunc_cpu_getfreq;
-static struct pmf_function *pfunc_slewing_done;;
+static struct pmf_function *pfunc_slewing_done;
static int g5_pfunc_switch_freq(int speed_mode)
{
diff --git a/arch/powerpc/platforms/powermac/pic.c b/arch/powerpc/platforms/powermac/pic.c
index dce7363..d212006 100644
--- a/arch/powerpc/platforms/powermac/pic.c
+++ b/arch/powerpc/platforms/powermac/pic.c
@@ -609,7 +609,7 @@
np = of_find_node_by_name(NULL, "via-pmu");
if (np == NULL)
goto not_found;
- viaint = irq_of_parse_and_map(np, 0);;
+ viaint = irq_of_parse_and_map(np, 0);
not_found:
#endif /* CONFIG_ADB_PMU */
diff --git a/arch/powerpc/platforms/powermac/setup.c b/arch/powerpc/platforms/powermac/setup.c
index 86f69a4..c205226 100644
--- a/arch/powerpc/platforms/powermac/setup.c
+++ b/arch/powerpc/platforms/powermac/setup.c
@@ -103,11 +103,6 @@
EXPORT_SYMBOL(smu_cmdbuf_abs);
#endif
-#ifdef CONFIG_SMP
-extern struct smp_ops_t psurge_smp_ops;
-extern struct smp_ops_t core99_smp_ops;
-#endif /* CONFIG_SMP */
-
static void pmac_show_cpuinfo(struct seq_file *m)
{
struct device_node *np;
@@ -341,34 +336,6 @@
ROOT_DEV = DEFAULT_ROOT_DEVICE;
#endif
-#ifdef CONFIG_SMP
- /* Check for Core99 */
- ic = of_find_node_by_name(NULL, "uni-n");
- if (!ic)
- ic = of_find_node_by_name(NULL, "u3");
- if (!ic)
- ic = of_find_node_by_name(NULL, "u4");
- if (ic) {
- of_node_put(ic);
- smp_ops = &core99_smp_ops;
- }
-#ifdef CONFIG_PPC32
- else {
- /*
- * We have to set bits in cpu_possible_map here since the
- * secondary CPU(s) aren't in the device tree, and
- * setup_per_cpu_areas only allocates per-cpu data for
- * CPUs in the cpu_possible_map.
- */
- int cpu;
-
- for (cpu = 1; cpu < 4 && cpu < NR_CPUS; ++cpu)
- cpu_set(cpu, cpu_possible_map);
- smp_ops = &psurge_smp_ops;
- }
-#endif
-#endif /* CONFIG_SMP */
-
#ifdef CONFIG_ADB
if (strstr(cmd_line, "adb_sync")) {
extern int __adb_probe_sync;
@@ -512,6 +479,14 @@
#ifdef CONFIG_PPC64
iommu_init_early_dart();
#endif
+
+ /* SMP Init has to be done early as we need to patch up
+ * cpu_possible_map before interrupt stacks are allocated
+ * or kaboom...
+ */
+#ifdef CONFIG_SMP
+ pmac_setup_smp();
+#endif
}
static int __init pmac_declare_of_platform_devices(void)
diff --git a/arch/powerpc/platforms/powermac/smp.c b/arch/powerpc/platforms/powermac/smp.c
index cf1dbe7..6d4da7b 100644
--- a/arch/powerpc/platforms/powermac/smp.c
+++ b/arch/powerpc/platforms/powermac/smp.c
@@ -64,10 +64,11 @@
extern void __secondary_start_pmac_0(void);
extern int pmac_pfunc_base_install(void);
-#ifdef CONFIG_PPC32
+static void (*pmac_tb_freeze)(int freeze);
+static u64 timebase;
+static int tb_req;
-/* Sync flag for HW tb sync */
-static volatile int sec_tb_reset = 0;
+#ifdef CONFIG_PPC32
/*
* Powersurge (old powermac SMP) support.
@@ -294,6 +295,9 @@
psurge_quad_init();
/* All released cards using this HW design have 4 CPUs */
ncpus = 4;
+ /* No sure how timebase sync works on those, let's use SW */
+ smp_ops->give_timebase = smp_generic_give_timebase;
+ smp_ops->take_timebase = smp_generic_take_timebase;
} else {
iounmap(quad_base);
if ((in_8(hhead_base + HHEAD_CONFIG) & 0x02) == 0) {
@@ -308,18 +312,15 @@
psurge_start = ioremap(PSURGE_START, 4);
psurge_pri_intr = ioremap(PSURGE_PRI_INTR, 4);
- /*
- * This is necessary because OF doesn't know about the
+ /* This is necessary because OF doesn't know about the
* secondary cpu(s), and thus there aren't nodes in the
* device tree for them, and smp_setup_cpu_maps hasn't
- * set their bits in cpu_possible_map and cpu_present_map.
+ * set their bits in cpu_present_map.
*/
if (ncpus > NR_CPUS)
ncpus = NR_CPUS;
- for (i = 1; i < ncpus ; ++i) {
+ for (i = 1; i < ncpus ; ++i)
cpu_set(i, cpu_present_map);
- set_hard_smp_processor_id(i, i);
- }
if (ppc_md.progress) ppc_md.progress("smp_psurge_probe - done", 0x352);
@@ -329,8 +330,14 @@
static void __init smp_psurge_kick_cpu(int nr)
{
unsigned long start = __pa(__secondary_start_pmac_0) + nr * 8;
- unsigned long a;
- int i;
+ unsigned long a, flags;
+ int i, j;
+
+ /* Defining this here is evil ... but I prefer hiding that
+ * crap to avoid giving people ideas that they can do the
+ * same.
+ */
+ extern volatile unsigned int cpu_callin_map[NR_CPUS];
/* may need to flush here if secondary bats aren't setup */
for (a = KERNELBASE; a < KERNELBASE + 0x800000; a += 32)
@@ -339,47 +346,52 @@
if (ppc_md.progress) ppc_md.progress("smp_psurge_kick_cpu", 0x353);
+ /* This is going to freeze the timeebase, we disable interrupts */
+ local_irq_save(flags);
+
out_be32(psurge_start, start);
mb();
psurge_set_ipi(nr);
+
/*
* We can't use udelay here because the timebase is now frozen.
*/
for (i = 0; i < 2000; ++i)
- barrier();
+ asm volatile("nop" : : : "memory");
psurge_clr_ipi(nr);
- if (ppc_md.progress) ppc_md.progress("smp_psurge_kick_cpu - done", 0x354);
-}
-
-/*
- * With the dual-cpu powersurge board, the decrementers and timebases
- * of both cpus are frozen after the secondary cpu is started up,
- * until we give the secondary cpu another interrupt. This routine
- * uses this to get the timebases synchronized.
- * -- paulus.
- */
-static void __init psurge_dual_sync_tb(int cpu_nr)
-{
- int t;
-
- set_dec(tb_ticks_per_jiffy);
- /* XXX fixme */
- set_tb(0, 0);
-
- if (cpu_nr > 0) {
- mb();
- sec_tb_reset = 1;
- return;
+ /*
+ * Also, because the timebase is frozen, we must not return to the
+ * caller which will try to do udelay's etc... Instead, we wait -here-
+ * for the CPU to callin.
+ */
+ for (i = 0; i < 100000 && !cpu_callin_map[nr]; ++i) {
+ for (j = 1; j < 10000; j++)
+ asm volatile("nop" : : : "memory");
+ asm volatile("sync" : : : "memory");
}
+ if (!cpu_callin_map[nr])
+ goto stuck;
- /* wait for the secondary to have reset its TB before proceeding */
- for (t = 10000000; t > 0 && !sec_tb_reset; --t)
- ;
+ /* And we do the TB sync here too for standard dual CPU cards */
+ if (psurge_type == PSURGE_DUAL) {
+ while(!tb_req)
+ barrier();
+ tb_req = 0;
+ mb();
+ timebase = get_tb();
+ mb();
+ while (timebase)
+ barrier();
+ mb();
+ }
+ stuck:
+ /* now interrupt the secondary, restarting both TBs */
+ if (psurge_type == PSURGE_DUAL)
+ psurge_set_ipi(1);
- /* now interrupt the secondary, starting both TBs */
- psurge_set_ipi(1);
+ if (ppc_md.progress) ppc_md.progress("smp_psurge_kick_cpu - done", 0x354);
}
static struct irqaction psurge_irqaction = {
@@ -390,36 +402,35 @@
static void __init smp_psurge_setup_cpu(int cpu_nr)
{
+ if (cpu_nr != 0)
+ return;
- if (cpu_nr == 0) {
- /* If we failed to start the second CPU, we should still
- * send it an IPI to start the timebase & DEC or we might
- * have them stuck.
- */
- if (num_online_cpus() < 2) {
- if (psurge_type == PSURGE_DUAL)
- psurge_set_ipi(1);
- return;
- }
- /* reset the entry point so if we get another intr we won't
- * try to startup again */
- out_be32(psurge_start, 0x100);
- if (setup_irq(30, &psurge_irqaction))
- printk(KERN_ERR "Couldn't get primary IPI interrupt");
- }
-
- if (psurge_type == PSURGE_DUAL)
- psurge_dual_sync_tb(cpu_nr);
+ /* reset the entry point so if we get another intr we won't
+ * try to startup again */
+ out_be32(psurge_start, 0x100);
+ if (setup_irq(30, &psurge_irqaction))
+ printk(KERN_ERR "Couldn't get primary IPI interrupt");
}
void __init smp_psurge_take_timebase(void)
{
- /* Dummy implementation */
+ if (psurge_type != PSURGE_DUAL)
+ return;
+
+ tb_req = 1;
+ mb();
+ while (!timebase)
+ barrier();
+ mb();
+ set_tb(timebase >> 32, timebase & 0xffffffff);
+ timebase = 0;
+ mb();
+ set_dec(tb_ticks_per_jiffy/2);
}
void __init smp_psurge_give_timebase(void)
{
- /* Dummy implementation */
+ /* Nothing to do here */
}
/* PowerSurge-style Macs */
@@ -437,9 +448,6 @@
* Core 99 and later support
*/
-static void (*pmac_tb_freeze)(int freeze);
-static u64 timebase;
-static int tb_req;
static void smp_core99_give_timebase(void)
{
@@ -478,7 +486,6 @@
set_tb(timebase >> 32, timebase & 0xffffffff);
timebase = 0;
mb();
- set_dec(tb_ticks_per_jiffy/2);
local_irq_restore(flags);
}
@@ -920,3 +927,34 @@
# endif
#endif
};
+
+void __init pmac_setup_smp(void)
+{
+ struct device_node *np;
+
+ /* Check for Core99 */
+ np = of_find_node_by_name(NULL, "uni-n");
+ if (!np)
+ np = of_find_node_by_name(NULL, "u3");
+ if (!np)
+ np = of_find_node_by_name(NULL, "u4");
+ if (np) {
+ of_node_put(np);
+ smp_ops = &core99_smp_ops;
+ }
+#ifdef CONFIG_PPC32
+ else {
+ /* We have to set bits in cpu_possible_map here since the
+ * secondary CPU(s) aren't in the device tree. Various
+ * things won't be initialized for CPUs not in the possible
+ * map, so we really need to fix it up here.
+ */
+ int cpu;
+
+ for (cpu = 1; cpu < 4 && cpu < NR_CPUS; ++cpu)
+ cpu_set(cpu, cpu_possible_map);
+ smp_ops = &psurge_smp_ops;
+ }
+#endif /* CONFIG_PPC32 */
+}
+
diff --git a/arch/powerpc/platforms/ps3/system-bus.c b/arch/powerpc/platforms/ps3/system-bus.c
index 9fead0f..3f763c5 100644
--- a/arch/powerpc/platforms/ps3/system-bus.c
+++ b/arch/powerpc/platforms/ps3/system-bus.c
@@ -284,7 +284,6 @@
int result;
dump_mmio_region(r);
-;
result = lv1_unmap_device_mmio_region(r->dev->bus_id, r->dev->dev_id,
r->lpar_addr);
diff --git a/arch/powerpc/platforms/pseries/lpar.c b/arch/powerpc/platforms/pseries/lpar.c
index e3139fa..903eb9e 100644
--- a/arch/powerpc/platforms/pseries/lpar.c
+++ b/arch/powerpc/platforms/pseries/lpar.c
@@ -286,7 +286,7 @@
unsigned long hpte_v, hpte_r;
if (!(vflags & HPTE_V_BOLTED))
- pr_debug("hpte_insert(group=%lx, va=%016lx, pa=%016lx, "
+ pr_devel("hpte_insert(group=%lx, va=%016lx, pa=%016lx, "
"rflags=%lx, vflags=%lx, psize=%d)\n",
hpte_group, va, pa, rflags, vflags, psize);
@@ -294,7 +294,7 @@
hpte_r = hpte_encode_r(pa, psize) | rflags;
if (!(vflags & HPTE_V_BOLTED))
- pr_debug(" hpte_v=%016lx, hpte_r=%016lx\n", hpte_v, hpte_r);
+ pr_devel(" hpte_v=%016lx, hpte_r=%016lx\n", hpte_v, hpte_r);
/* Now fill in the actual HPTE */
/* Set CEC cookie to 0 */
@@ -311,7 +311,7 @@
lpar_rc = plpar_pte_enter(flags, hpte_group, hpte_v, hpte_r, &slot);
if (unlikely(lpar_rc == H_PTEG_FULL)) {
if (!(vflags & HPTE_V_BOLTED))
- pr_debug(" full\n");
+ pr_devel(" full\n");
return -1;
}
@@ -322,11 +322,11 @@
*/
if (unlikely(lpar_rc != H_SUCCESS)) {
if (!(vflags & HPTE_V_BOLTED))
- pr_debug(" lpar err %lu\n", lpar_rc);
+ pr_devel(" lpar err %lu\n", lpar_rc);
return -2;
}
if (!(vflags & HPTE_V_BOLTED))
- pr_debug(" -> slot: %lu\n", slot & 7);
+ pr_devel(" -> slot: %lu\n", slot & 7);
/* Because of iSeries, we have to pass down the secondary
* bucket bit here as well
@@ -418,17 +418,17 @@
want_v = hpte_encode_avpn(va, psize, ssize);
- pr_debug(" update: avpnv=%016lx, hash=%016lx, f=%lx, psize: %d ...",
+ pr_devel(" update: avpnv=%016lx, hash=%016lx, f=%lx, psize: %d ...",
want_v, slot, flags, psize);
lpar_rc = plpar_pte_protect(flags, slot, want_v);
if (lpar_rc == H_NOT_FOUND) {
- pr_debug("not found !\n");
+ pr_devel("not found !\n");
return -1;
}
- pr_debug("ok\n");
+ pr_devel("ok\n");
BUG_ON(lpar_rc != H_SUCCESS);
@@ -503,7 +503,7 @@
unsigned long lpar_rc;
unsigned long dummy1, dummy2;
- pr_debug(" inval : slot=%lx, va=%016lx, psize: %d, local: %d\n",
+ pr_devel(" inval : slot=%lx, va=%016lx, psize: %d, local: %d\n",
slot, va, psize, local);
want_v = hpte_encode_avpn(va, psize, ssize);
diff --git a/arch/powerpc/platforms/pseries/smp.c b/arch/powerpc/platforms/pseries/smp.c
index 1a231c3..1f8f6cf 100644
--- a/arch/powerpc/platforms/pseries/smp.c
+++ b/arch/powerpc/platforms/pseries/smp.c
@@ -35,7 +35,6 @@
#include <asm/prom.h>
#include <asm/smp.h>
#include <asm/paca.h>
-#include <asm/time.h>
#include <asm/machdep.h>
#include <asm/cputable.h>
#include <asm/firmware.h>
@@ -118,31 +117,6 @@
}
#endif /* CONFIG_XICS */
-static DEFINE_SPINLOCK(timebase_lock);
-static unsigned long timebase = 0;
-
-static void __devinit pSeries_give_timebase(void)
-{
- spin_lock(&timebase_lock);
- rtas_call(rtas_token("freeze-time-base"), 0, 1, NULL);
- timebase = get_tb();
- spin_unlock(&timebase_lock);
-
- while (timebase)
- barrier();
- rtas_call(rtas_token("thaw-time-base"), 0, 1, NULL);
-}
-
-static void __devinit pSeries_take_timebase(void)
-{
- while (!timebase)
- barrier();
- spin_lock(&timebase_lock);
- set_tb(timebase >> 32, timebase & 0xffffffff);
- timebase = 0;
- spin_unlock(&timebase_lock);
-}
-
static void __devinit smp_pSeries_kick_cpu(int nr)
{
BUG_ON(nr < 0 || nr >= NR_CPUS);
@@ -209,8 +183,8 @@
/* Non-lpar has additional take/give timebase */
if (rtas_token("freeze-time-base") != RTAS_UNKNOWN_SERVICE) {
- smp_ops->give_timebase = pSeries_give_timebase;
- smp_ops->take_timebase = pSeries_take_timebase;
+ smp_ops->give_timebase = rtas_give_timebase;
+ smp_ops->take_timebase = rtas_take_timebase;
}
pr_debug(" <- smp_init_pSeries()\n");
diff --git a/arch/powerpc/platforms/pseries/xics.c b/arch/powerpc/platforms/pseries/xics.c
index be3581a..419f8a6 100644
--- a/arch/powerpc/platforms/pseries/xics.c
+++ b/arch/powerpc/platforms/pseries/xics.c
@@ -190,10 +190,10 @@
int call_status;
int server;
- pr_debug("xics: unmask virq %d\n", virq);
+ pr_devel("xics: unmask virq %d\n", virq);
irq = (unsigned int)irq_map[virq].hwirq;
- pr_debug(" -> map to hwirq 0x%x\n", irq);
+ pr_devel(" -> map to hwirq 0x%x\n", irq);
if (irq == XICS_IPI || irq == XICS_IRQ_SPURIOUS)
return;
@@ -252,7 +252,7 @@
{
unsigned int irq;
- pr_debug("xics: mask virq %d\n", virq);
+ pr_devel("xics: mask virq %d\n", virq);
irq = (unsigned int)irq_map[virq].hwirq;
if (irq == XICS_IPI || irq == XICS_IRQ_SPURIOUS)
@@ -414,7 +414,7 @@
static int xics_host_map(struct irq_host *h, unsigned int virq,
irq_hw_number_t hw)
{
- pr_debug("xics: map virq %d, hwirq 0x%lx\n", virq, hw);
+ pr_devel("xics: map virq %d, hwirq 0x%lx\n", virq, hw);
/* Insert the interrupt mapping into the radix tree for fast lookup */
irq_radix_revmap_insert(xics_host, virq, hw);
diff --git a/arch/powerpc/sysdev/fsl_rio.c b/arch/powerpc/sysdev/fsl_rio.c
index 39db9d1..cbb3bed 100644
--- a/arch/powerpc/sysdev/fsl_rio.c
+++ b/arch/powerpc/sysdev/fsl_rio.c
@@ -965,7 +965,7 @@
break;
default:
str = "Unknown";
- break;;
+ break;
}
dev_info(dev, "Hardware port width: %s\n", str);
diff --git a/arch/powerpc/sysdev/ipic.c b/arch/powerpc/sysdev/ipic.c
index a86d3ce..69e2630 100644
--- a/arch/powerpc/sysdev/ipic.c
+++ b/arch/powerpc/sysdev/ipic.c
@@ -728,12 +728,10 @@
if (ret)
return NULL;
- ipic = alloc_bootmem(sizeof(struct ipic));
+ ipic = kzalloc(sizeof(*ipic), GFP_KERNEL);
if (ipic == NULL)
return NULL;
- memset(ipic, 0, sizeof(struct ipic));
-
ipic->irqhost = irq_alloc_host(node, IRQ_HOST_MAP_LINEAR,
NR_IPIC_INTS,
&ipic_host_ops, 0);
diff --git a/arch/powerpc/sysdev/mpic.c b/arch/powerpc/sysdev/mpic.c
index 9c3af50..3981ae4 100644
--- a/arch/powerpc/sysdev/mpic.c
+++ b/arch/powerpc/sysdev/mpic.c
@@ -279,28 +279,29 @@
}
#ifdef CONFIG_PPC_DCR
-static void _mpic_map_dcr(struct mpic *mpic, struct mpic_reg_bank *rb,
+static void _mpic_map_dcr(struct mpic *mpic, struct device_node *node,
+ struct mpic_reg_bank *rb,
unsigned int offset, unsigned int size)
{
const u32 *dbasep;
- dbasep = of_get_property(mpic->irqhost->of_node, "dcr-reg", NULL);
+ dbasep = of_get_property(node, "dcr-reg", NULL);
- rb->dhost = dcr_map(mpic->irqhost->of_node, *dbasep + offset, size);
+ rb->dhost = dcr_map(node, *dbasep + offset, size);
BUG_ON(!DCR_MAP_OK(rb->dhost));
}
-static inline void mpic_map(struct mpic *mpic, phys_addr_t phys_addr,
- struct mpic_reg_bank *rb, unsigned int offset,
- unsigned int size)
+static inline void mpic_map(struct mpic *mpic, struct device_node *node,
+ phys_addr_t phys_addr, struct mpic_reg_bank *rb,
+ unsigned int offset, unsigned int size)
{
if (mpic->flags & MPIC_USES_DCR)
- _mpic_map_dcr(mpic, rb, offset, size);
+ _mpic_map_dcr(mpic, node, rb, offset, size);
else
_mpic_map_mmio(mpic, phys_addr, rb, offset, size);
}
#else /* CONFIG_PPC_DCR */
-#define mpic_map(m,p,b,o,s) _mpic_map_mmio(m,p,b,o,s)
+#define mpic_map(m,n,p,b,o,s) _mpic_map_mmio(m,p,b,o,s)
#endif /* !CONFIG_PPC_DCR */
@@ -507,9 +508,8 @@
printk(KERN_INFO "mpic: Setting up HT PICs workarounds for U3/U4\n");
/* Allocate fixups array */
- mpic->fixups = alloc_bootmem(128 * sizeof(struct mpic_irq_fixup));
+ mpic->fixups = kzalloc(128 * sizeof(*mpic->fixups), GFP_KERNEL);
BUG_ON(mpic->fixups == NULL);
- memset(mpic->fixups, 0, 128 * sizeof(struct mpic_irq_fixup));
/* Init spinlock */
spin_lock_init(&mpic->fixup_lock);
@@ -1052,11 +1052,10 @@
int intvec_top;
u64 paddr = phys_addr;
- mpic = alloc_bootmem(sizeof(struct mpic));
+ mpic = kzalloc(sizeof(struct mpic), GFP_KERNEL);
if (mpic == NULL)
return NULL;
-
- memset(mpic, 0, sizeof(struct mpic));
+
mpic->name = name;
mpic->hc_irq = mpic_irq_chip;
@@ -1109,9 +1108,8 @@
psize /= 4;
bits = intvec_top + 1;
mapsize = BITS_TO_LONGS(bits) * sizeof(unsigned long);
- mpic->protected = alloc_bootmem(mapsize);
+ mpic->protected = kzalloc(mapsize, GFP_KERNEL);
BUG_ON(mpic->protected == NULL);
- memset(mpic->protected, 0, mapsize);
for (i = 0; i < psize; i++) {
if (psrc[i] > intvec_top)
continue;
@@ -1152,8 +1150,8 @@
}
/* Map the global registers */
- mpic_map(mpic, paddr, &mpic->gregs, MPIC_INFO(GREG_BASE), 0x1000);
- mpic_map(mpic, paddr, &mpic->tmregs, MPIC_INFO(TIMER_BASE), 0x1000);
+ mpic_map(mpic, node, paddr, &mpic->gregs, MPIC_INFO(GREG_BASE), 0x1000);
+ mpic_map(mpic, node, paddr, &mpic->tmregs, MPIC_INFO(TIMER_BASE), 0x1000);
/* Reset */
if (flags & MPIC_WANTS_RESET) {
@@ -1194,7 +1192,7 @@
/* Map the per-CPU registers */
for (i = 0; i < mpic->num_cpus; i++) {
- mpic_map(mpic, paddr, &mpic->cpuregs[i],
+ mpic_map(mpic, node, paddr, &mpic->cpuregs[i],
MPIC_INFO(CPU_BASE) + i * MPIC_INFO(CPU_STRIDE),
0x1000);
}
@@ -1202,7 +1200,7 @@
/* Initialize main ISU if none provided */
if (mpic->isu_size == 0) {
mpic->isu_size = mpic->num_sources;
- mpic_map(mpic, paddr, &mpic->isus[0],
+ mpic_map(mpic, node, paddr, &mpic->isus[0],
MPIC_INFO(IRQ_BASE), MPIC_INFO(IRQ_STRIDE) * mpic->isu_size);
}
mpic->isu_shift = 1 + __ilog2(mpic->isu_size - 1);
@@ -1256,8 +1254,10 @@
BUG_ON(isu_num >= MPIC_MAX_ISU);
- mpic_map(mpic, paddr, &mpic->isus[isu_num], 0,
+ mpic_map(mpic, mpic->irqhost->of_node,
+ paddr, &mpic->isus[isu_num], 0,
MPIC_INFO(IRQ_STRIDE) * mpic->isu_size);
+
if ((isu_first + mpic->isu_size) > mpic->num_sources)
mpic->num_sources = isu_first + mpic->isu_size;
}
@@ -1351,7 +1351,8 @@
#ifdef CONFIG_PM
/* allocate memory to save mpic state */
- mpic->save_data = alloc_bootmem(mpic->num_sources * sizeof(struct mpic_irq_save));
+ mpic->save_data = kmalloc(mpic->num_sources * sizeof(*mpic->save_data),
+ GFP_KERNEL);
BUG_ON(mpic->save_data == NULL);
#endif
}
diff --git a/arch/powerpc/sysdev/ppc4xx_pci.c b/arch/powerpc/sysdev/ppc4xx_pci.c
index daefc93..6ff9d71 100644
--- a/arch/powerpc/sysdev/ppc4xx_pci.c
+++ b/arch/powerpc/sysdev/ppc4xx_pci.c
@@ -1531,7 +1531,7 @@
*/
/* Calculate window size */
- sa = (0xffffffffffffffffull << ilog2(ep_size));;
+ sa = (0xffffffffffffffffull << ilog2(ep_size));
/* Setup BAR0 */
out_le32(mbase + PECFG_BAR0HMPA, RES_TO_U32_HIGH(sa));
@@ -1550,7 +1550,7 @@
out_le32(mbase + PCI_BASE_ADDRESS_1, RES_TO_U32_HIGH(ep_addr));
} else {
/* Calculate window size */
- sa = (0xffffffffffffffffull << ilog2(size));;
+ sa = (0xffffffffffffffffull << ilog2(size));
if (res->flags & IORESOURCE_PREFETCH)
sa |= 0x8;
diff --git a/arch/powerpc/sysdev/qe_lib/qe.c b/arch/powerpc/sysdev/qe_lib/qe.c
index b28b0e5..237e365 100644
--- a/arch/powerpc/sysdev/qe_lib/qe.c
+++ b/arch/powerpc/sysdev/qe_lib/qe.c
@@ -112,6 +112,7 @@
{
unsigned long flags;
u8 mcn_shift = 0, dev_shift = 0;
+ u32 ret;
spin_lock_irqsave(&qe_lock, flags);
if (cmd == QE_RESET) {
@@ -139,11 +140,13 @@
}
/* wait for the QE_CR_FLG to clear */
- while(in_be32(&qe_immr->cp.cecr) & QE_CR_FLG)
- cpu_relax();
+ ret = spin_event_timeout((in_be32(&qe_immr->cp.cecr) & QE_CR_FLG) == 0,
+ 100, 0);
+ /* On timeout (e.g. failure), the expression will be false (ret == 0),
+ otherwise it will be true (ret == 1). */
spin_unlock_irqrestore(&qe_lock, flags);
- return 0;
+ return ret == 1;
}
EXPORT_SYMBOL(qe_issue_cmd);
diff --git a/arch/powerpc/sysdev/qe_lib/qe_ic.c b/arch/powerpc/sysdev/qe_lib/qe_ic.c
index 63cdf98..074905c 100644
--- a/arch/powerpc/sysdev/qe_lib/qe_ic.c
+++ b/arch/powerpc/sysdev/qe_lib/qe_ic.c
@@ -333,12 +333,10 @@
if (ret)
return;
- qe_ic = alloc_bootmem(sizeof(struct qe_ic));
+ qe_ic = kzalloc(sizeof(*qe_ic), GFP_KERNEL);
if (qe_ic == NULL)
return;
- memset(qe_ic, 0, sizeof(struct qe_ic));
-
qe_ic->irqhost = irq_alloc_host(node, IRQ_HOST_MAP_LINEAR,
NR_QE_IC_INTS, &qe_ic_host_ops, 0);
if (qe_ic->irqhost == NULL)
diff --git a/arch/powerpc/sysdev/uic.c b/arch/powerpc/sysdev/uic.c
index d35405c..466ce9a 100644
--- a/arch/powerpc/sysdev/uic.c
+++ b/arch/powerpc/sysdev/uic.c
@@ -258,11 +258,10 @@
BUG_ON(! of_device_is_compatible(node, "ibm,uic"));
- uic = alloc_bootmem(sizeof(*uic));
+ uic = kzalloc(sizeof(*uic), GFP_KERNEL);
if (! uic)
return NULL; /* FIXME: panic? */
- memset(uic, 0, sizeof(*uic));
spin_lock_init(&uic->lock);
indexp = of_get_property(node, "cell-index", &len);
if (!indexp || (len != sizeof(u32))) {
diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig
index e577839..2ae5d72 100644
--- a/arch/s390/Kconfig
+++ b/arch/s390/Kconfig
@@ -95,6 +95,11 @@
select HAVE_ARCH_TRACEHOOK
select INIT_ALL_POSSIBLE
select HAVE_PERF_COUNTERS
+ select GENERIC_ATOMIC64 if !64BIT
+
+config SCHED_OMIT_FRAME_POINTER
+ bool
+ default y
source "init/Kconfig"
@@ -116,6 +121,9 @@
bool
default y if !64BIT
+config KTIME_SCALAR
+ def_bool 32BIT
+
config SMP
bool "Symmetric multi-processing support"
---help---
diff --git a/arch/s390/include/asm/atomic.h b/arch/s390/include/asm/atomic.h
index fca9dff..c7d0abf 100644
--- a/arch/s390/include/asm/atomic.h
+++ b/arch/s390/include/asm/atomic.h
@@ -268,7 +268,12 @@
#define atomic64_inc_not_zero(v) atomic64_add_unless((v), 1, 0)
#undef __CSG_LOOP
-#endif
+
+#else /* __s390x__ */
+
+#include <asm-generic/atomic64.h>
+
+#endif /* __s390x__ */
#define smp_mb__before_atomic_dec() smp_mb()
#define smp_mb__after_atomic_dec() smp_mb()
diff --git a/arch/s390/include/asm/kvm_host.h b/arch/s390/include/asm/kvm_host.h
index a27d0d5..1cd02f6 100644
--- a/arch/s390/include/asm/kvm_host.h
+++ b/arch/s390/include/asm/kvm_host.h
@@ -99,7 +99,9 @@
__u8 reservedd0[48]; /* 0x00d0 */
__u64 gcr[16]; /* 0x0100 */
__u64 gbea; /* 0x0180 */
- __u8 reserved188[120]; /* 0x0188 */
+ __u8 reserved188[24]; /* 0x0188 */
+ __u32 fac; /* 0x01a0 */
+ __u8 reserved1a4[92]; /* 0x01a4 */
} __attribute__((packed));
struct kvm_vcpu_stat {
diff --git a/arch/s390/include/asm/perf_counter.h b/arch/s390/include/asm/perf_counter.h
index a7205a3..7015188 100644
--- a/arch/s390/include/asm/perf_counter.h
+++ b/arch/s390/include/asm/perf_counter.h
@@ -6,3 +6,5 @@
static inline void set_perf_counter_pending(void) {}
static inline void clear_perf_counter_pending(void) {}
+
+#define PERF_COUNTER_INDEX_OFFSET 0
diff --git a/arch/s390/include/asm/thread_info.h b/arch/s390/include/asm/thread_info.h
index 925bcc6..ba1cab9 100644
--- a/arch/s390/include/asm/thread_info.h
+++ b/arch/s390/include/asm/thread_info.h
@@ -61,7 +61,7 @@
.exec_domain = &default_exec_domain, \
.flags = 0, \
.cpu = 0, \
- .preempt_count = 1, \
+ .preempt_count = INIT_PREEMPT_COUNT, \
.restart_block = { \
.fn = do_no_restart_syscall, \
}, \
diff --git a/arch/s390/kernel/dis.c b/arch/s390/kernel/dis.c
index d2f270c..db943a7 100644
--- a/arch/s390/kernel/dis.c
+++ b/arch/s390/kernel/dis.c
@@ -15,7 +15,6 @@
#include <linux/timer.h>
#include <linux/mm.h>
#include <linux/smp.h>
-#include <linux/smp_lock.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/delay.h>
diff --git a/arch/s390/kernel/ipl.c b/arch/s390/kernel/ipl.c
index b8bf4b1..371a2d8 100644
--- a/arch/s390/kernel/ipl.c
+++ b/arch/s390/kernel/ipl.c
@@ -70,6 +70,7 @@
char *name;
void (*fn) (struct shutdown_trigger *trigger);
int (*init) (void);
+ int init_rc;
};
static char *ipl_type_str(enum ipl_type type)
@@ -1486,11 +1487,13 @@
int i;
for (i = 0; i < SHUTDOWN_ACTIONS_COUNT; i++) {
- if (!shutdown_actions_list[i])
- continue;
if (sysfs_streq(buf, shutdown_actions_list[i]->name)) {
- trigger->action = shutdown_actions_list[i];
- return len;
+ if (shutdown_actions_list[i]->init_rc) {
+ return shutdown_actions_list[i]->init_rc;
+ } else {
+ trigger->action = shutdown_actions_list[i];
+ return len;
+ }
}
}
return -EINVAL;
@@ -1640,8 +1643,8 @@
for (i = 0; i < SHUTDOWN_ACTIONS_COUNT; i++) {
if (!shutdown_actions_list[i]->init)
continue;
- if (shutdown_actions_list[i]->init())
- shutdown_actions_list[i] = NULL;
+ shutdown_actions_list[i]->init_rc =
+ shutdown_actions_list[i]->init();
}
}
diff --git a/arch/s390/kernel/ptrace.c b/arch/s390/kernel/ptrace.c
index 490b399..43acd73 100644
--- a/arch/s390/kernel/ptrace.c
+++ b/arch/s390/kernel/ptrace.c
@@ -26,7 +26,6 @@
#include <linux/sched.h>
#include <linux/mm.h>
#include <linux/smp.h>
-#include <linux/smp_lock.h>
#include <linux/errno.h>
#include <linux/ptrace.h>
#include <linux/user.h>
diff --git a/arch/s390/kvm/kvm-s390.c b/arch/s390/kvm/kvm-s390.c
index c18b21d..90d9d1b 100644
--- a/arch/s390/kvm/kvm-s390.c
+++ b/arch/s390/kvm/kvm-s390.c
@@ -25,6 +25,7 @@
#include <asm/lowcore.h>
#include <asm/pgtable.h>
#include <asm/nmi.h>
+#include <asm/system.h>
#include "kvm-s390.h"
#include "gaccess.h"
@@ -69,6 +70,7 @@
{ NULL }
};
+static unsigned long long *facilities;
/* Section: not file related */
void kvm_arch_hardware_enable(void *garbage)
@@ -288,6 +290,7 @@
vcpu->arch.sie_block->gmsor = vcpu->kvm->arch.guest_origin;
vcpu->arch.sie_block->ecb = 2;
vcpu->arch.sie_block->eca = 0xC1002001U;
+ vcpu->arch.sie_block->fac = (int) (long) facilities;
hrtimer_init(&vcpu->arch.ckc_timer, CLOCK_REALTIME, HRTIMER_MODE_ABS);
tasklet_init(&vcpu->arch.tasklet, kvm_s390_tasklet,
(unsigned long) vcpu);
@@ -739,11 +742,29 @@
static int __init kvm_s390_init(void)
{
- return kvm_init(NULL, sizeof(struct kvm_vcpu), THIS_MODULE);
+ int ret;
+ ret = kvm_init(NULL, sizeof(struct kvm_vcpu), THIS_MODULE);
+ if (ret)
+ return ret;
+
+ /*
+ * guests can ask for up to 255+1 double words, we need a full page
+ * to hold the maximum amount of facilites. On the other hand, we
+ * only set facilities that are known to work in KVM.
+ */
+ facilities = (unsigned long long *) get_zeroed_page(GFP_DMA);
+ if (!facilities) {
+ kvm_exit();
+ return -ENOMEM;
+ }
+ stfle(facilities, 1);
+ facilities[0] &= 0xff00fff3f0700000ULL;
+ return 0;
}
static void __exit kvm_s390_exit(void)
{
+ free_page((unsigned long) facilities);
kvm_exit();
}
diff --git a/arch/s390/kvm/priv.c b/arch/s390/kvm/priv.c
index 93ecd06..d426aac 100644
--- a/arch/s390/kvm/priv.c
+++ b/arch/s390/kvm/priv.c
@@ -158,7 +158,7 @@
vcpu->stat.instruction_stfl++;
/* only pass the facility bits, which we can handle */
- facility_list &= 0xfe00fff3;
+ facility_list &= 0xff00fff3;
rc = copy_to_guest(vcpu, offsetof(struct _lowcore, stfl_fac_list),
&facility_list, sizeof(facility_list));
diff --git a/arch/s390/lib/Makefile b/arch/s390/lib/Makefile
index ab6735d..97975ec 100644
--- a/arch/s390/lib/Makefile
+++ b/arch/s390/lib/Makefile
@@ -3,6 +3,6 @@
#
lib-y += delay.o string.o uaccess_std.o uaccess_pt.o
-obj-$(CONFIG_32BIT) += div64.o qrnnd.o
+obj-$(CONFIG_32BIT) += div64.o qrnnd.o ucmpdi2.o
lib-$(CONFIG_64BIT) += uaccess_mvcos.o
lib-$(CONFIG_SMP) += spinlock.o
diff --git a/arch/s390/lib/delay.c b/arch/s390/lib/delay.c
index 3f5f680..97c1eca8 100644
--- a/arch/s390/lib/delay.c
+++ b/arch/s390/lib/delay.c
@@ -36,9 +36,11 @@
cr0 = (cr0_saved & 0xffff00e0) | 0x00000800;
__ctl_load(cr0 , 0, 0);
mask = psw_kernel_bits | PSW_MASK_WAIT | PSW_MASK_EXT;
+ lockdep_off();
trace_hardirqs_on();
__load_psw_mask(mask);
local_irq_disable();
+ lockdep_on();
__ctl_load(cr0_saved, 0, 0);
local_tick_enable(clock_saved);
set_clock_comparator(S390_lowcore.clock_comparator);
diff --git a/arch/s390/lib/ucmpdi2.c b/arch/s390/lib/ucmpdi2.c
new file mode 100644
index 0000000..3e05ff5
--- /dev/null
+++ b/arch/s390/lib/ucmpdi2.c
@@ -0,0 +1,26 @@
+#include <linux/module.h>
+
+union ull_union {
+ unsigned long long ull;
+ struct {
+ unsigned int high;
+ unsigned int low;
+ } ui;
+};
+
+int __ucmpdi2(unsigned long long a, unsigned long long b)
+{
+ union ull_union au = {.ull = a};
+ union ull_union bu = {.ull = b};
+
+ if (au.ui.high < bu.ui.high)
+ return 0;
+ else if (au.ui.high > bu.ui.high)
+ return 2;
+ if (au.ui.low < bu.ui.low)
+ return 0;
+ else if (au.ui.low > bu.ui.low)
+ return 2;
+ return 1;
+}
+EXPORT_SYMBOL(__ucmpdi2);
diff --git a/arch/s390/mm/fault.c b/arch/s390/mm/fault.c
index 74eb26b..e5e119f 100644
--- a/arch/s390/mm/fault.c
+++ b/arch/s390/mm/fault.c
@@ -22,7 +22,6 @@
#include <linux/compat.h>
#include <linux/smp.h>
#include <linux/kdebug.h>
-#include <linux/smp_lock.h>
#include <linux/init.h>
#include <linux/console.h>
#include <linux/module.h>
diff --git a/arch/sh/Kconfig.debug b/arch/sh/Kconfig.debug
index 8ece0b5..39224b5 100644
--- a/arch/sh/Kconfig.debug
+++ b/arch/sh/Kconfig.debug
@@ -61,10 +61,6 @@
select both the EARLY_SCIF_CONSOLE and SH_STANDARD_BIOS, using
the kernel command line option to toggle back and forth.
-config DEBUG_BOOTMEM
- depends on DEBUG_KERNEL
- bool "Debug BOOTMEM initialization"
-
config DEBUG_STACKOVERFLOW
bool "Check for stack overflows"
depends on DEBUG_KERNEL && SUPERH32
diff --git a/arch/sh/boards/mach-se/7206/io.c b/arch/sh/boards/mach-se/7206/io.c
index 9c3a332..1804556 100644
--- a/arch/sh/boards/mach-se/7206/io.c
+++ b/arch/sh/boards/mach-se/7206/io.c
@@ -50,7 +50,7 @@
unsigned short se7206_inw(unsigned long port)
{
- return *port2adr(port);;
+ return *port2adr(port);
}
void se7206_outb(unsigned char value, unsigned long port)
diff --git a/arch/sh/boards/mach-se/7724/setup.c b/arch/sh/boards/mach-se/7724/setup.c
index 9cd04bd..8fed45a 100644
--- a/arch/sh/boards/mach-se/7724/setup.c
+++ b/arch/sh/boards/mach-se/7724/setup.c
@@ -19,10 +19,13 @@
#include <linux/smc91x.h>
#include <linux/gpio.h>
#include <linux/input.h>
+#include <linux/usb/r8a66597.h>
#include <video/sh_mobile_lcdc.h>
#include <media/sh_mobile_ceu.h>
#include <asm/io.h>
#include <asm/heartbeat.h>
+#include <asm/sh_eth.h>
+#include <asm/clock.h>
#include <asm/sh_keysc.h>
#include <cpu/sh7724.h>
#include <mach-se/mach/se7724.h>
@@ -272,6 +275,62 @@
},
};
+/* SH Eth */
+static struct resource sh_eth_resources[] = {
+ [0] = {
+ .start = SH_ETH_ADDR,
+ .end = SH_ETH_ADDR + 0x1FC,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = 91,
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+ },
+};
+
+struct sh_eth_plat_data sh_eth_plat = {
+ .phy = 0x1f, /* SMSC LAN8187 */
+ .edmac_endian = EDMAC_LITTLE_ENDIAN,
+};
+
+static struct platform_device sh_eth_device = {
+ .name = "sh-eth",
+ .id = 0,
+ .dev = {
+ .platform_data = &sh_eth_plat,
+ },
+ .num_resources = ARRAY_SIZE(sh_eth_resources),
+ .resource = sh_eth_resources,
+};
+
+static struct r8a66597_platdata sh7724_usb0_host_data = {
+};
+
+static struct resource sh7724_usb0_host_resources[] = {
+ [0] = {
+ .start = 0xa4d80000,
+ .end = 0xa4d800ff,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = 65,
+ .end = 65,
+ .flags = IORESOURCE_IRQ | IRQF_TRIGGER_LOW,
+ },
+};
+
+static struct platform_device sh7724_usb0_host_device = {
+ .name = "r8a66597_hcd",
+ .id = 0,
+ .dev = {
+ .dma_mask = NULL, /* not use dma */
+ .coherent_dma_mask = 0xffffffff,
+ .platform_data = &sh7724_usb0_host_data,
+ },
+ .num_resources = ARRAY_SIZE(sh7724_usb0_host_resources),
+ .resource = sh7724_usb0_host_resources,
+};
+
static struct platform_device *ms7724se_devices[] __initdata = {
&heartbeat_device,
&smc91x_eth_device,
@@ -280,11 +339,62 @@
&ceu0_device,
&ceu1_device,
&keysc_device,
+ &sh_eth_device,
+ &sh7724_usb0_host_device,
};
+#define EEPROM_OP 0xBA206000
+#define EEPROM_ADR 0xBA206004
+#define EEPROM_DATA 0xBA20600C
+#define EEPROM_STAT 0xBA206010
+#define EEPROM_STRT 0xBA206014
+static int __init sh_eth_is_eeprom_ready(void)
+{
+ int t = 10000;
+
+ while (t--) {
+ if (!ctrl_inw(EEPROM_STAT))
+ return 1;
+ cpu_relax();
+ }
+
+ printk(KERN_ERR "ms7724se can not access to eeprom\n");
+ return 0;
+}
+
+static void __init sh_eth_init(void)
+{
+ int i;
+ u16 mac[3];
+
+ /* check EEPROM status */
+ if (!sh_eth_is_eeprom_ready())
+ return;
+
+ /* read MAC addr from EEPROM */
+ for (i = 0 ; i < 3 ; i++) {
+ ctrl_outw(0x0, EEPROM_OP); /* read */
+ ctrl_outw(i*2, EEPROM_ADR);
+ ctrl_outw(0x1, EEPROM_STRT);
+ if (!sh_eth_is_eeprom_ready())
+ return;
+
+ mac[i] = ctrl_inw(EEPROM_DATA);
+ mac[i] = ((mac[i] & 0xFF) << 8) | (mac[i] >> 8); /* swap */
+ }
+
+ /* reset sh-eth */
+ ctrl_outl(0x1, SH_ETH_ADDR + 0x0);
+
+ /* set MAC addr */
+ ctrl_outl(((mac[0] << 16) | (mac[1])), SH_ETH_MAHR);
+ ctrl_outl((mac[2]), SH_ETH_MALR);
+}
+
#define SW4140 0xBA201000
#define FPGA_OUT 0xBA200400
#define PORT_HIZA 0xA4050158
+#define PORT_MSELCRB 0xA4050182
#define SW41_A 0x0100
#define SW41_B 0x0200
@@ -294,6 +404,7 @@
#define SW41_F 0x2000
#define SW41_G 0x4000
#define SW41_H 0x8000
+
static int __init devices_setup(void)
{
u16 sw = ctrl_inw(SW4140); /* select camera, monitor */
@@ -302,9 +413,16 @@
ctrl_outw(ctrl_inw(FPGA_OUT) &
~((1 << 1) | /* LAN */
(1 << 6) | /* VIDEO DAC */
- (1 << 12)), /* USB0 */
+ (1 << 12) | /* USB0 */
+ (1 << 14)), /* RMII */
FPGA_OUT);
+ /* turn on USB clocks, use external clock */
+ ctrl_outw((ctrl_inw(PORT_MSELCRB) & ~0xc000) | 0x8000, PORT_MSELCRB);
+
+ /* enable USB0 port */
+ ctrl_outw(0x0600, 0xa40501d4);
+
/* enable IRQ 0,1,2 */
gpio_request(GPIO_FN_INTC_IRQ0, NULL);
gpio_request(GPIO_FN_INTC_IRQ1, NULL);
@@ -374,7 +492,7 @@
gpio_request(GPIO_FN_VIO0_CLK, NULL);
gpio_request(GPIO_FN_VIO0_FLD, NULL);
gpio_request(GPIO_FN_VIO0_HD, NULL);
- platform_resource_setup_memory(&ceu0_device, "ceu", 4 << 20);
+ platform_resource_setup_memory(&ceu0_device, "ceu0", 4 << 20);
/* enable CEU1 */
gpio_request(GPIO_FN_VIO1_D7, NULL);
@@ -389,7 +507,7 @@
gpio_request(GPIO_FN_VIO1_HD, NULL);
gpio_request(GPIO_FN_VIO1_VD, NULL);
gpio_request(GPIO_FN_VIO1_CLK, NULL);
- platform_resource_setup_memory(&ceu1_device, "ceu", 4 << 20);
+ platform_resource_setup_memory(&ceu1_device, "ceu1", 4 << 20);
/* KEYSC */
gpio_request(GPIO_FN_KEYOUT5_IN5, NULL);
@@ -404,6 +522,28 @@
gpio_request(GPIO_FN_KEYOUT1, NULL);
gpio_request(GPIO_FN_KEYOUT0, NULL);
+ /*
+ * enable SH-Eth
+ *
+ * please remove J33 pin from your board !!
+ *
+ * ms7724 board should not use GPIO_FN_LNKSTA pin
+ * So, This time PTX5 is set to input pin
+ */
+ gpio_request(GPIO_FN_RMII_RXD0, NULL);
+ gpio_request(GPIO_FN_RMII_RXD1, NULL);
+ gpio_request(GPIO_FN_RMII_TXD0, NULL);
+ gpio_request(GPIO_FN_RMII_TXD1, NULL);
+ gpio_request(GPIO_FN_RMII_REF_CLK, NULL);
+ gpio_request(GPIO_FN_RMII_TX_EN, NULL);
+ gpio_request(GPIO_FN_RMII_RX_ER, NULL);
+ gpio_request(GPIO_FN_RMII_CRS_DV, NULL);
+ gpio_request(GPIO_FN_MDIO, NULL);
+ gpio_request(GPIO_FN_MDC, NULL);
+ gpio_request(GPIO_PTX5, NULL);
+ gpio_direction_input(GPIO_PTX5);
+ sh_eth_init();
+
if (sw & SW41_B) {
/* SVGA */
lcdc_info.ch[0].lcd_cfg.xres = 800;
@@ -437,7 +577,7 @@
}
return platform_add_devices(ms7724se_devices,
- ARRAY_SIZE(ms7724se_devices));
+ ARRAY_SIZE(ms7724se_devices));
}
device_initcall(devices_setup);
diff --git a/arch/sh/configs/migor_defconfig b/arch/sh/configs/migor_defconfig
index da627d2..b18cfd3 100644
--- a/arch/sh/configs/migor_defconfig
+++ b/arch/sh/configs/migor_defconfig
@@ -309,7 +309,7 @@
CONFIG_BOOT_LINK_OFFSET=0x00800000
CONFIG_ENTRY_OFFSET=0x00001000
CONFIG_CMDLINE_BOOL=y
-CONFIG_CMDLINE="console=ttySC0,115200 earlyprintk=serial ip=on root=/dev/nfs ip=dhcp"
+CONFIG_CMDLINE="console=tty0 console=ttySC0,115200 earlyprintk=serial ip=on root=/dev/nfs ip=dhcp"
#
# Bus options
@@ -858,7 +858,35 @@
#
# CONFIG_VGASTATE is not set
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+# CONFIG_FB_CFB_FILLRECT is not set
+# CONFIG_FB_CFB_COPYAREA is not set
+# CONFIG_FB_CFB_IMAGEBLIT is not set
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+CONFIG_FB_SYS_FILLRECT=y
+CONFIG_FB_SYS_COPYAREA=y
+CONFIG_FB_SYS_IMAGEBLIT=y
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+CONFIG_FB_SYS_FOPS=y
+CONFIG_FB_DEFERRED_IO=y
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_SH_MOBILE_LCDC=y
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
@@ -870,6 +898,27 @@
# Console display driver support
#
CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+CONFIG_FONTS=y
+# CONFIG_FONT_8x8 is not set
+# CONFIG_FONT_8x16 is not set
+# CONFIG_FONT_6x11 is not set
+# CONFIG_FONT_7x14 is not set
+# CONFIG_FONT_PEARL_8x8 is not set
+# CONFIG_FONT_ACORN_8x8 is not set
+CONFIG_FONT_MINI_4x6=y
+# CONFIG_FONT_SUN8x16 is not set
+# CONFIG_FONT_SUN12x22 is not set
+# CONFIG_FONT_10x18 is not set
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+# CONFIG_LOGO_LINUX_CLUT224 is not set
+# CONFIG_LOGO_SUPERH_MONO is not set
+CONFIG_LOGO_SUPERH_VGA16=y
+# CONFIG_LOGO_SUPERH_CLUT224 is not set
# CONFIG_SOUND is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
diff --git a/arch/sh/configs/se7724_defconfig b/arch/sh/configs/se7724_defconfig
index 3840270..3ee783a0 100644
--- a/arch/sh/configs/se7724_defconfig
+++ b/arch/sh/configs/se7724_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.30
-# Thu Jun 18 16:09:05 2009
+# Mon Jun 29 16:28:43 2009
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
@@ -14,6 +14,7 @@
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_IRQ_PER_CPU=y
CONFIG_GENERIC_GPIO=y
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CLOCKEVENTS=y
@@ -28,7 +29,9 @@
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_ARCH_NO_VIRT_TO_BUS=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
@@ -88,10 +91,12 @@
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
#
# Performance Counters
#
+# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
@@ -107,6 +112,10 @@
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
# CONFIG_SLOW_WORK is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
@@ -119,7 +128,7 @@
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
@@ -584,7 +593,6 @@
# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_LIBFC is not set
# CONFIG_LIBFCOE is not set
# CONFIG_SCSI_DEBUG is not set
@@ -624,7 +632,7 @@
CONFIG_MII=y
# CONFIG_AX88796 is not set
# CONFIG_STNIC is not set
-# CONFIG_SH_ETH is not set
+CONFIG_SH_ETH=y
CONFIG_SMC91X=y
# CONFIG_ENC28J60 is not set
# CONFIG_ETHOC is not set
@@ -801,6 +809,11 @@
#
# CONFIG_SPI_SPIDEV is not set
# CONFIG_SPI_TLE62X0 is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
CONFIG_ARCH_REQUIRE_GPIOLIB=y
CONFIG_GPIOLIB=y
# CONFIG_GPIO_SYSFS is not set
@@ -851,6 +864,8 @@
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_EZX_PCAP is not set
# CONFIG_REGULATOR is not set
CONFIG_MEDIA_SUPPORT=y
@@ -1196,6 +1211,7 @@
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
#
# SPI RTC drivers
@@ -1260,6 +1276,7 @@
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
CONFIG_FILE_LOCKING=y
diff --git a/arch/sh/include/asm/perf_counter.h b/arch/sh/include/asm/perf_counter.h
index a8153c2..d8e6bb9 100644
--- a/arch/sh/include/asm/perf_counter.h
+++ b/arch/sh/include/asm/perf_counter.h
@@ -2,6 +2,8 @@
#define __ASM_SH_PERF_COUNTER_H
/* SH only supports software counters through this interface. */
-#define set_perf_counter_pending() do { } while (0)
+static inline void set_perf_counter_pending(void) {}
+
+#define PERF_COUNTER_INDEX_OFFSET 0
#endif /* __ASM_SH_PERF_COUNTER_H */
diff --git a/arch/sh/include/asm/syscall_32.h b/arch/sh/include/asm/syscall_32.h
index 5bc3468..6f83f2c 100644
--- a/arch/sh/include/asm/syscall_32.h
+++ b/arch/sh/include/asm/syscall_32.h
@@ -3,6 +3,7 @@
#include <linux/kernel.h>
#include <linux/sched.h>
+#include <linux/err.h>
#include <asm/ptrace.h>
/* The system call number is given by the user in R3 */
diff --git a/arch/sh/include/asm/thread_info.h b/arch/sh/include/asm/thread_info.h
index f09ac48..d570ac2 100644
--- a/arch/sh/include/asm/thread_info.h
+++ b/arch/sh/include/asm/thread_info.h
@@ -51,7 +51,7 @@
.exec_domain = &default_exec_domain, \
.flags = 0, \
.cpu = 0, \
- .preempt_count = 1, \
+ .preempt_count = INIT_PREEMPT_COUNT, \
.addr_limit = KERNEL_DS, \
.restart_block = { \
.fn = do_no_restart_syscall, \
diff --git a/arch/sh/include/mach-se/mach/se7724.h b/arch/sh/include/mach-se/mach/se7724.h
index 74164b6..29514a3 100644
--- a/arch/sh/include/mach-se/mach/se7724.h
+++ b/arch/sh/include/mach-se/mach/se7724.h
@@ -20,6 +20,11 @@
*/
#include <asm/addrspace.h>
+/* SH Eth */
+#define SH_ETH_ADDR (0xA4600000)
+#define SH_ETH_MAHR (SH_ETH_ADDR + 0x1C0)
+#define SH_ETH_MALR (SH_ETH_ADDR + 0x1C8)
+
#define PA_LED (0xba203000) /* 8bit LED */
#define IRQ_MODE (0xba200010)
#define IRQ0_SR (0xba200014)
diff --git a/arch/sh/mm/fault_32.c b/arch/sh/mm/fault_32.c
index cc8ddbd..7192594 100644
--- a/arch/sh/mm/fault_32.c
+++ b/arch/sh/mm/fault_32.c
@@ -15,12 +15,28 @@
#include <linux/mm.h>
#include <linux/hardirq.h>
#include <linux/kprobes.h>
-#include <linux/marker.h>
+#include <linux/perf_counter.h>
#include <asm/io_trapped.h>
#include <asm/system.h>
#include <asm/mmu_context.h>
#include <asm/tlbflush.h>
+static inline int notify_page_fault(struct pt_regs *regs, int trap)
+{
+ int ret = 0;
+
+#ifdef CONFIG_KPROBES
+ if (!user_mode(regs)) {
+ preempt_disable();
+ if (kprobe_running() && kprobe_fault_handler(regs, trap))
+ ret = 1;
+ preempt_enable();
+ }
+#endif
+
+ return ret;
+}
+
/*
* This routine handles page faults. It determines the address,
* and the problem, and then passes it off to one of the appropriate
@@ -87,14 +103,17 @@
return;
}
- /* Only enable interrupts if they were on before the fault */
- if ((regs->sr & SR_IMASK) != SR_IMASK) {
- trace_hardirqs_on();
- local_irq_enable();
- }
-
mm = tsk->mm;
+ if (unlikely(notify_page_fault(regs, lookup_exception_vector())))
+ return;
+
+ /* Only enable interrupts if they were on before the fault */
+ if ((regs->sr & SR_IMASK) != SR_IMASK)
+ local_irq_enable();
+
+ perf_swcounter_event(PERF_COUNT_SW_PAGE_FAULTS, 1, 0, regs, address);
+
/*
* If we're in an interrupt or have no user
* context, we must not take the fault..
@@ -141,10 +160,15 @@
goto do_sigbus;
BUG();
}
- if (fault & VM_FAULT_MAJOR)
+ if (fault & VM_FAULT_MAJOR) {
tsk->maj_flt++;
- else
+ perf_swcounter_event(PERF_COUNT_SW_PAGE_FAULTS_MAJ, 1, 0,
+ regs, address);
+ } else {
tsk->min_flt++;
+ perf_swcounter_event(PERF_COUNT_SW_PAGE_FAULTS_MIN, 1, 0,
+ regs, address);
+ }
up_read(&mm->mmap_sem);
return;
@@ -245,22 +269,6 @@
goto no_context;
}
-static inline int notify_page_fault(struct pt_regs *regs, int trap)
-{
- int ret = 0;
-
-#ifdef CONFIG_KPROBES
- if (!user_mode(regs)) {
- preempt_disable();
- if (kprobe_running() && kprobe_fault_handler(regs, trap))
- ret = 1;
- preempt_enable();
- }
-#endif
-
- return ret;
-}
-
/*
* Called with interrupts disabled.
*/
@@ -273,12 +281,7 @@
pmd_t *pmd;
pte_t *pte;
pte_t entry;
- int ret = 0;
-
- if (notify_page_fault(regs, lookup_exception_vector()))
- goto out;
-
- ret = 1;
+ int ret = 1;
/*
* We don't take page faults for P1, P2, and parts of P4, these
diff --git a/arch/sh/mm/tlb-sh3.c b/arch/sh/mm/tlb-sh3.c
index 7fbfd5a..17cb7c3 100644
--- a/arch/sh/mm/tlb-sh3.c
+++ b/arch/sh/mm/tlb-sh3.c
@@ -18,7 +18,6 @@
#include <linux/mman.h>
#include <linux/mm.h>
#include <linux/smp.h>
-#include <linux/smp_lock.h>
#include <linux/interrupt.h>
#include <asm/system.h>
diff --git a/arch/sh/mm/tlbflush_64.c b/arch/sh/mm/tlbflush_64.c
index fcbb6e1..3ce40ea 100644
--- a/arch/sh/mm/tlbflush_64.c
+++ b/arch/sh/mm/tlbflush_64.c
@@ -3,7 +3,7 @@
*
* Copyright (C) 2000, 2001 Paolo Alberelli
* Copyright (C) 2003 Richard Curnow (/proc/tlb, bug fixes)
- * Copyright (C) 2003 Paul Mundt
+ * Copyright (C) 2003 - 2009 Paul Mundt
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
@@ -20,6 +20,7 @@
#include <linux/mman.h>
#include <linux/mm.h>
#include <linux/smp.h>
+#include <linux/perf_counter.h>
#include <linux/interrupt.h>
#include <asm/system.h>
#include <asm/io.h>
@@ -115,6 +116,8 @@
/* Not an IO address, so reenable interrupts */
local_irq_enable();
+ perf_swcounter_event(PERF_COUNT_SW_PAGE_FAULTS, 1, 0, regs, address);
+
/*
* If we're in an interrupt or have no user
* context, we must not take the fault..
@@ -195,10 +198,16 @@
goto do_sigbus;
BUG();
}
- if (fault & VM_FAULT_MAJOR)
+
+ if (fault & VM_FAULT_MAJOR) {
tsk->maj_flt++;
- else
+ perf_swcounter_event(PERF_COUNT_SW_PAGE_FAULTS_MAJ, 1, 0,
+ regs, address);
+ } else {
tsk->min_flt++;
+ perf_swcounter_event(PERF_COUNT_SW_PAGE_FAULTS_MIN, 1, 0,
+ regs, address);
+ }
/* If we get here, the page fault has been handled. Do the TLB refill
now from the newly-setup PTE, to avoid having to fault again right
diff --git a/arch/sparc/boot/Makefile b/arch/sparc/boot/Makefile
index 96041a8..1ff0fd9 100644
--- a/arch/sparc/boot/Makefile
+++ b/arch/sparc/boot/Makefile
@@ -15,7 +15,7 @@
ifeq ($(CONFIG_SPARC32),y)
quiet_cmd_piggy = PIGGY $@
- cmd_piggy = $(obj)/piggyback_32 $@ $(obj)/System.map $(ROOT_IMG)
+ cmd_piggy = $(obj)/piggyback_32 $@ System.map $(ROOT_IMG)
quiet_cmd_btfix = BTFIX $@
cmd_btfix = $(OBJDUMP) -x vmlinux | $(obj)/btfixupprep > $@
quiet_cmd_sysmap = SYSMAP $(obj)/System.map
@@ -58,7 +58,7 @@
$(obj)/zImage: $(obj)/image
$(call if_changed,strip)
-$(obj)/tftpboot.img: $(obj)/piggyback $(obj)/System.map $(obj)/image FORCE
+$(obj)/tftpboot.img: $(obj)/image $(obj)/piggyback_32 System.map $(ROOT_IMG) FORCE
$(call if_changed,elftoaout)
$(call if_changed,piggy)
@@ -79,7 +79,7 @@
$(call if_changed,strip)
@echo ' kernel: $@ is ready'
-$(obj)/tftpboot.img: vmlinux $(obj)/piggyback_64 System.map $(ROOT_IMG) FORCE
+$(obj)/tftpboot.img: $(obj)/image $(obj)/piggyback_64 System.map $(ROOT_IMG) FORCE
$(call if_changed,elftoaout)
$(call if_changed,piggy)
@echo ' kernel: $@ is ready'
diff --git a/arch/sparc/boot/piggyback_32.c b/arch/sparc/boot/piggyback_32.c
index c9f500c..e8dc9ad 100644
--- a/arch/sparc/boot/piggyback_32.c
+++ b/arch/sparc/boot/piggyback_32.c
@@ -70,7 +70,7 @@
int main(int argc,char **argv)
{
static char aout_magic[] = { 0x01, 0x03, 0x01, 0x07 };
- unsigned char buffer[1024], *q, *r;
+ char buffer[1024], *q, *r;
unsigned int i, j, k, start, end, offset;
FILE *map;
struct stat s;
@@ -84,7 +84,7 @@
while (fgets (buffer, 1024, map)) {
if (!strcmp (buffer + 8, " T start\n") || !strcmp (buffer + 16, " T start\n"))
start = strtoul (buffer, NULL, 16);
- else if (!strcmp (buffer + 8, " A end\n") || !strcmp (buffer + 16, " A end\n"))
+ else if (!strcmp (buffer + 8, " A _end\n") || !strcmp (buffer + 16, " A _end\n"))
end = strtoul (buffer, NULL, 16);
}
fclose (map);
diff --git a/arch/sparc/boot/piggyback_64.c b/arch/sparc/boot/piggyback_64.c
index de364bf..c63fd1b 100644
--- a/arch/sparc/boot/piggyback_64.c
+++ b/arch/sparc/boot/piggyback_64.c
@@ -46,6 +46,7 @@
struct stat s;
int image, tail;
+ start = end = 0;
if (stat (argv[3], &s) < 0) die (argv[3]);
map = fopen (argv[2], "r");
if (!map) die(argv[2]);
diff --git a/arch/sparc/include/asm/thread_info_32.h b/arch/sparc/include/asm/thread_info_32.h
index 0f7b0e5..844d73a 100644
--- a/arch/sparc/include/asm/thread_info_32.h
+++ b/arch/sparc/include/asm/thread_info_32.h
@@ -54,8 +54,6 @@
/*
* macros/functions for gaining access to the thread information structure
- *
- * preempt_count needs to be 1 initially, until the scheduler is functional.
*/
#define INIT_THREAD_INFO(tsk) \
{ \
@@ -64,7 +62,7 @@
.exec_domain = &default_exec_domain, \
.flags = 0, \
.cpu = 0, \
- .preempt_count = 1, \
+ .preempt_count = INIT_PREEMPT_COUNT, \
.restart_block = { \
.fn = do_no_restart_syscall, \
}, \
diff --git a/arch/sparc/include/asm/thread_info_64.h b/arch/sparc/include/asm/thread_info_64.h
index 6586572..1b45a7b 100644
--- a/arch/sparc/include/asm/thread_info_64.h
+++ b/arch/sparc/include/asm/thread_info_64.h
@@ -125,8 +125,6 @@
/*
* macros/functions for gaining access to the thread information structure
- *
- * preempt_count needs to be 1 initially, until the scheduler is functional.
*/
#ifndef __ASSEMBLY__
@@ -135,7 +133,7 @@
.task = &tsk, \
.flags = ((unsigned long)ASI_P) << TI_FLAG_CURRENT_DS_SHIFT, \
.exec_domain = &default_exec_domain, \
- .preempt_count = 1, \
+ .preempt_count = INIT_PREEMPT_COUNT, \
.restart_block = { \
.fn = do_no_restart_syscall, \
}, \
diff --git a/arch/sparc/kernel/irq_64.c b/arch/sparc/kernel/irq_64.c
index bd07505..f0ee790 100644
--- a/arch/sparc/kernel/irq_64.c
+++ b/arch/sparc/kernel/irq_64.c
@@ -20,7 +20,6 @@
#include <linux/delay.h>
#include <linux/proc_fs.h>
#include <linux/seq_file.h>
-#include <linux/bootmem.h>
#include <linux/irq.h>
#include <asm/ptrace.h>
@@ -914,25 +913,19 @@
tb->nonresum_qmask);
}
-static void __init alloc_one_mondo(unsigned long *pa_ptr, unsigned long qmask)
+/* Each queue region must be a power of 2 multiple of 64 bytes in
+ * size. The base real address must be aligned to the size of the
+ * region. Thus, an 8KB queue must be 8KB aligned, for example.
+ */
+static void __init alloc_one_queue(unsigned long *pa_ptr, unsigned long qmask)
{
unsigned long size = PAGE_ALIGN(qmask + 1);
- void *p = __alloc_bootmem(size, size, 0);
+ unsigned long order = get_order(size);
+ unsigned long p;
+
+ p = __get_free_pages(GFP_KERNEL, order);
if (!p) {
- prom_printf("SUN4V: Error, cannot allocate mondo queue.\n");
- prom_halt();
- }
-
- *pa_ptr = __pa(p);
-}
-
-static void __init alloc_one_kbuf(unsigned long *pa_ptr, unsigned long qmask)
-{
- unsigned long size = PAGE_ALIGN(qmask + 1);
- void *p = __alloc_bootmem(size, size, 0);
-
- if (!p) {
- prom_printf("SUN4V: Error, cannot allocate kbuf page.\n");
+ prom_printf("SUN4V: Error, cannot allocate queue.\n");
prom_halt();
}
@@ -942,11 +935,11 @@
static void __init init_cpu_send_mondo_info(struct trap_per_cpu *tb)
{
#ifdef CONFIG_SMP
- void *page;
+ unsigned long page;
BUILD_BUG_ON((NR_CPUS * sizeof(u16)) > (PAGE_SIZE - 64));
- page = alloc_bootmem_pages(PAGE_SIZE);
+ page = get_zeroed_page(GFP_KERNEL);
if (!page) {
prom_printf("SUN4V: Error, cannot allocate cpu mondo page.\n");
prom_halt();
@@ -965,13 +958,13 @@
for_each_possible_cpu(cpu) {
struct trap_per_cpu *tb = &trap_block[cpu];
- alloc_one_mondo(&tb->cpu_mondo_pa, tb->cpu_mondo_qmask);
- alloc_one_mondo(&tb->dev_mondo_pa, tb->dev_mondo_qmask);
- alloc_one_mondo(&tb->resum_mondo_pa, tb->resum_qmask);
- alloc_one_kbuf(&tb->resum_kernel_buf_pa, tb->resum_qmask);
- alloc_one_mondo(&tb->nonresum_mondo_pa, tb->nonresum_qmask);
- alloc_one_kbuf(&tb->nonresum_kernel_buf_pa,
- tb->nonresum_qmask);
+ alloc_one_queue(&tb->cpu_mondo_pa, tb->cpu_mondo_qmask);
+ alloc_one_queue(&tb->dev_mondo_pa, tb->dev_mondo_qmask);
+ alloc_one_queue(&tb->resum_mondo_pa, tb->resum_qmask);
+ alloc_one_queue(&tb->resum_kernel_buf_pa, tb->resum_qmask);
+ alloc_one_queue(&tb->nonresum_mondo_pa, tb->nonresum_qmask);
+ alloc_one_queue(&tb->nonresum_kernel_buf_pa,
+ tb->nonresum_qmask);
}
}
@@ -999,7 +992,7 @@
kill_prom_timer();
size = sizeof(struct ino_bucket) * NUM_IVECS;
- ivector_table = alloc_bootmem(size);
+ ivector_table = kzalloc(size, GFP_KERNEL);
if (!ivector_table) {
prom_printf("Fatal error, cannot allocate ivector_table\n");
prom_halt();
diff --git a/arch/sparc/kernel/ptrace_32.c b/arch/sparc/kernel/ptrace_32.c
index 8ce6285..7e3dfd9 100644
--- a/arch/sparc/kernel/ptrace_32.c
+++ b/arch/sparc/kernel/ptrace_32.c
@@ -16,7 +16,6 @@
#include <linux/ptrace.h>
#include <linux/user.h>
#include <linux/smp.h>
-#include <linux/smp_lock.h>
#include <linux/security.h>
#include <linux/signal.h>
#include <linux/regset.h>
diff --git a/arch/sparc/kernel/ptrace_64.c b/arch/sparc/kernel/ptrace_64.c
index a941c61..4ae91dc 100644
--- a/arch/sparc/kernel/ptrace_64.c
+++ b/arch/sparc/kernel/ptrace_64.c
@@ -17,7 +17,6 @@
#include <linux/ptrace.h>
#include <linux/user.h>
#include <linux/smp.h>
-#include <linux/smp_lock.h>
#include <linux/security.h>
#include <linux/seccomp.h>
#include <linux/audit.h>
diff --git a/arch/sparc/kernel/time_64.c b/arch/sparc/kernel/time_64.c
index 5c12e79..da1218e 100644
--- a/arch/sparc/kernel/time_64.c
+++ b/arch/sparc/kernel/time_64.c
@@ -11,7 +11,6 @@
#include <linux/errno.h>
#include <linux/module.h>
#include <linux/sched.h>
-#include <linux/smp_lock.h>
#include <linux/kernel.h>
#include <linux/param.h>
#include <linux/string.h>
diff --git a/arch/sparc/kernel/traps_32.c b/arch/sparc/kernel/traps_32.c
index 3582833..c0490c7 100644
--- a/arch/sparc/kernel/traps_32.c
+++ b/arch/sparc/kernel/traps_32.c
@@ -13,7 +13,6 @@
#include <linux/kernel.h>
#include <linux/signal.h>
#include <linux/smp.h>
-#include <linux/smp_lock.h>
#include <linux/kdebug.h>
#include <asm/delay.h>
diff --git a/arch/sparc/kernel/vio.c b/arch/sparc/kernel/vio.c
index 753d128..c28c714 100644
--- a/arch/sparc/kernel/vio.c
+++ b/arch/sparc/kernel/vio.c
@@ -224,7 +224,12 @@
if (!strcmp(type, "domain-services-port"))
bus_id_name = "ds";
- if (strlen(bus_id_name) >= BUS_ID_SIZE - 4) {
+ /*
+ * 20 char is the old driver-core name size limit, which is no more.
+ * This check can probably be removed after review and possible
+ * adaption of the vio users name length handling.
+ */
+ if (strlen(bus_id_name) >= 20 - 4) {
printk(KERN_ERR "VIO: bus_id_name [%s] is too long.\n",
bus_id_name);
return NULL;
diff --git a/arch/um/drivers/slip_kern.c b/arch/um/drivers/slip_kern.c
index 5ec1756..dd2aadc 100644
--- a/arch/um/drivers/slip_kern.c
+++ b/arch/um/drivers/slip_kern.c
@@ -30,7 +30,6 @@
slip_proto_init(&spri->slip);
- dev->init = NULL;
dev->hard_header_len = 0;
dev->header_ops = NULL;
dev->addr_len = 0;
diff --git a/arch/um/drivers/slirp_kern.c b/arch/um/drivers/slirp_kern.c
index f15a6e7..e376284 100644
--- a/arch/um/drivers/slirp_kern.c
+++ b/arch/um/drivers/slirp_kern.c
@@ -32,7 +32,6 @@
slip_proto_init(&spri->slip);
- dev->init = NULL;
dev->hard_header_len = 0;
dev->header_ops = NULL;
dev->addr_len = 0;
diff --git a/arch/um/include/asm/dma-mapping.h b/arch/um/include/asm/dma-mapping.h
index 90fc708..378de4b 100644
--- a/arch/um/include/asm/dma-mapping.h
+++ b/arch/um/include/asm/dma-mapping.h
@@ -79,14 +79,14 @@
}
static inline void
-dma_sync_single(struct device *dev, dma_addr_t dma_handle, size_t size,
+dma_sync_single_for_cpu(struct device *dev, dma_addr_t dma_handle, size_t size,
enum dma_data_direction direction)
{
BUG();
}
static inline void
-dma_sync_sg(struct device *dev, struct scatterlist *sg, int nelems,
+dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg, int nelems,
enum dma_data_direction direction)
{
BUG();
diff --git a/arch/um/include/asm/thread_info.h b/arch/um/include/asm/thread_info.h
index 62274ab..fd911f8 100644
--- a/arch/um/include/asm/thread_info.h
+++ b/arch/um/include/asm/thread_info.h
@@ -32,7 +32,7 @@
.exec_domain = &default_exec_domain, \
.flags = 0, \
.cpu = 0, \
- .preempt_count = 1, \
+ .preempt_count = INIT_PREEMPT_COUNT, \
.addr_limit = KERNEL_DS, \
.restart_block = { \
.fn = do_no_restart_syscall, \
diff --git a/arch/um/kernel/sysrq.c b/arch/um/kernel/sysrq.c
index 56d43d0..0960de5 100644
--- a/arch/um/kernel/sysrq.c
+++ b/arch/um/kernel/sysrq.c
@@ -70,8 +70,8 @@
if (kstack_end(stack))
break;
if (i && ((i % 8) == 0))
- printk("\n" KERN_INFO " ");
- printk("%08lx ", *stack++);
+ printk(KERN_INFO " ");
+ printk(KERN_CONT "%08lx ", *stack++);
}
show_trace(task, esp);
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index d1430ef..738bdc6 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -1913,25 +1913,26 @@
recommended you say N here while the DMAR code remains
experimental.
-config DMAR_GFX_WA
- def_bool y
- prompt "Support for Graphics workaround"
+config DMAR_BROKEN_GFX_WA
+ def_bool n
+ prompt "Workaround broken graphics drivers (going away soon)"
depends on DMAR
---help---
Current Graphics drivers tend to use physical address
for DMA and avoid using DMA APIs. Setting this config
option permits the IOMMU driver to set a unity map for
all the OS-visible memory. Hence the driver can continue
- to use physical addresses for DMA.
+ to use physical addresses for DMA, at least until this
+ option is removed in the 2.6.32 kernel.
config DMAR_FLOPPY_WA
def_bool y
depends on DMAR
---help---
- Floppy disk drivers are know to bypass DMA API calls
+ Floppy disk drivers are known to bypass DMA API calls
thereby failing to work when IOMMU is enabled. This
workaround will setup a 1:1 mapping for the first
- 16M to make floppy (an ISA device) work.
+ 16MiB to make floppy (an ISA device) work.
config INTR_REMAP
bool "Support for Interrupt Remapping (EXPERIMENTAL)"
diff --git a/arch/x86/boot/video-bios.c b/arch/x86/boot/video-bios.c
index d660be4..49e0c18 100644
--- a/arch/x86/boot/video-bios.c
+++ b/arch/x86/boot/video-bios.c
@@ -37,14 +37,13 @@
ireg.al = mode; /* AH=0x00 Set Video Mode */
intcall(0x10, &ireg, NULL);
-
ireg.ah = 0x0f; /* Get Current Video Mode */
intcall(0x10, &ireg, &oreg);
do_restore = 1; /* Assume video contents were lost */
/* Not all BIOSes are clean with the top bit */
- new_mode = ireg.al & 0x7f;
+ new_mode = oreg.al & 0x7f;
if (new_mode == mode)
return 0; /* Mode change OK */
diff --git a/arch/x86/boot/video-vesa.c b/arch/x86/boot/video-vesa.c
index c700147..275dd17 100644
--- a/arch/x86/boot/video-vesa.c
+++ b/arch/x86/boot/video-vesa.c
@@ -45,7 +45,7 @@
ireg.di = (size_t)&vginfo;
intcall(0x10, &ireg, &oreg);
- if (ireg.ax != 0x004f ||
+ if (oreg.ax != 0x004f ||
vginfo.signature != VESA_MAGIC ||
vginfo.version < 0x0102)
return 0; /* Not present */
@@ -70,7 +70,7 @@
ireg.di = (size_t)&vminfo;
intcall(0x10, &ireg, &oreg);
- if (ireg.ax != 0x004f)
+ if (oreg.ax != 0x004f)
continue;
if ((vminfo.mode_attr & 0x15) == 0x05) {
diff --git a/arch/x86/include/asm/atomic_32.h b/arch/x86/include/asm/atomic_32.h
index 2503d4e..dc5a667 100644
--- a/arch/x86/include/asm/atomic_32.h
+++ b/arch/x86/include/asm/atomic_32.h
@@ -19,7 +19,10 @@
*
* Atomically reads the value of @v.
*/
-#define atomic_read(v) ((v)->counter)
+static inline int atomic_read(const atomic_t *v)
+{
+ return v->counter;
+}
/**
* atomic_set - set atomic variable
@@ -28,7 +31,10 @@
*
* Atomically sets the value of @v to @i.
*/
-#define atomic_set(v, i) (((v)->counter) = (i))
+static inline void atomic_set(atomic_t *v, int i)
+{
+ v->counter = i;
+}
/**
* atomic_add - add integer to atomic variable
@@ -200,8 +206,15 @@
return atomic_add_return(-i, v);
}
-#define atomic_cmpxchg(v, old, new) (cmpxchg(&((v)->counter), (old), (new)))
-#define atomic_xchg(v, new) (xchg(&((v)->counter), (new)))
+static inline int atomic_cmpxchg(atomic_t *v, int old, int new)
+{
+ return cmpxchg(&v->counter, old, new);
+}
+
+static inline int atomic_xchg(atomic_t *v, int new)
+{
+ return xchg(&v->counter, new);
+}
/**
* atomic_add_unless - add unless the number is already a given value
@@ -250,45 +263,12 @@
/* An 64bit atomic type */
typedef struct {
- unsigned long long counter;
+ u64 __aligned(8) counter;
} atomic64_t;
#define ATOMIC64_INIT(val) { (val) }
-/**
- * atomic64_read - read atomic64 variable
- * @ptr: pointer of type atomic64_t
- *
- * Atomically reads the value of @v.
- * Doesn't imply a read memory barrier.
- */
-#define __atomic64_read(ptr) ((ptr)->counter)
-
-static inline unsigned long long
-cmpxchg8b(unsigned long long *ptr, unsigned long long old, unsigned long long new)
-{
- asm volatile(
-
- LOCK_PREFIX "cmpxchg8b (%[ptr])\n"
-
- : "=A" (old)
-
- : [ptr] "D" (ptr),
- "A" (old),
- "b" (ll_low(new)),
- "c" (ll_high(new))
-
- : "memory");
-
- return old;
-}
-
-static inline unsigned long long
-atomic64_cmpxchg(atomic64_t *ptr, unsigned long long old_val,
- unsigned long long new_val)
-{
- return cmpxchg8b(&ptr->counter, old_val, new_val);
-}
+extern u64 atomic64_cmpxchg(atomic64_t *ptr, u64 old_val, u64 new_val);
/**
* atomic64_xchg - xchg atomic64 variable
@@ -298,18 +278,7 @@
* Atomically xchgs the value of @ptr to @new_val and returns
* the old value.
*/
-
-static inline unsigned long long
-atomic64_xchg(atomic64_t *ptr, unsigned long long new_val)
-{
- unsigned long long old_val;
-
- do {
- old_val = atomic_read(ptr);
- } while (atomic64_cmpxchg(ptr, old_val, new_val) != old_val);
-
- return old_val;
-}
+extern u64 atomic64_xchg(atomic64_t *ptr, u64 new_val);
/**
* atomic64_set - set atomic64 variable
@@ -318,10 +287,7 @@
*
* Atomically sets the value of @ptr to @new_val.
*/
-static inline void atomic64_set(atomic64_t *ptr, unsigned long long new_val)
-{
- atomic64_xchg(ptr, new_val);
-}
+extern void atomic64_set(atomic64_t *ptr, u64 new_val);
/**
* atomic64_read - read atomic64 variable
@@ -329,17 +295,30 @@
*
* Atomically reads the value of @ptr and returns it.
*/
-static inline unsigned long long atomic64_read(atomic64_t *ptr)
+static inline u64 atomic64_read(atomic64_t *ptr)
{
- unsigned long long curr_val;
+ u64 res;
- do {
- curr_val = __atomic64_read(ptr);
- } while (atomic64_cmpxchg(ptr, curr_val, curr_val) != curr_val);
+ /*
+ * Note, we inline this atomic64_t primitive because
+ * it only clobbers EAX/EDX and leaves the others
+ * untouched. We also (somewhat subtly) rely on the
+ * fact that cmpxchg8b returns the current 64-bit value
+ * of the memory location we are touching:
+ */
+ asm volatile(
+ "mov %%ebx, %%eax\n\t"
+ "mov %%ecx, %%edx\n\t"
+ LOCK_PREFIX "cmpxchg8b %1\n"
+ : "=&A" (res)
+ : "m" (*ptr)
+ );
- return curr_val;
+ return res;
}
+extern u64 atomic64_read(atomic64_t *ptr);
+
/**
* atomic64_add_return - add and return
* @delta: integer value to add
@@ -347,34 +326,14 @@
*
* Atomically adds @delta to @ptr and returns @delta + *@ptr
*/
-static inline unsigned long long
-atomic64_add_return(unsigned long long delta, atomic64_t *ptr)
-{
- unsigned long long old_val, new_val;
+extern u64 atomic64_add_return(u64 delta, atomic64_t *ptr);
- do {
- old_val = atomic_read(ptr);
- new_val = old_val + delta;
-
- } while (atomic64_cmpxchg(ptr, old_val, new_val) != old_val);
-
- return new_val;
-}
-
-static inline long atomic64_sub_return(unsigned long long delta, atomic64_t *ptr)
-{
- return atomic64_add_return(-delta, ptr);
-}
-
-static inline long atomic64_inc_return(atomic64_t *ptr)
-{
- return atomic64_add_return(1, ptr);
-}
-
-static inline long atomic64_dec_return(atomic64_t *ptr)
-{
- return atomic64_sub_return(1, ptr);
-}
+/*
+ * Other variants with different arithmetic operators:
+ */
+extern u64 atomic64_sub_return(u64 delta, atomic64_t *ptr);
+extern u64 atomic64_inc_return(atomic64_t *ptr);
+extern u64 atomic64_dec_return(atomic64_t *ptr);
/**
* atomic64_add - add integer to atomic64 variable
@@ -383,10 +342,7 @@
*
* Atomically adds @delta to @ptr.
*/
-static inline void atomic64_add(unsigned long long delta, atomic64_t *ptr)
-{
- atomic64_add_return(delta, ptr);
-}
+extern void atomic64_add(u64 delta, atomic64_t *ptr);
/**
* atomic64_sub - subtract the atomic64 variable
@@ -395,10 +351,7 @@
*
* Atomically subtracts @delta from @ptr.
*/
-static inline void atomic64_sub(unsigned long long delta, atomic64_t *ptr)
-{
- atomic64_add(-delta, ptr);
-}
+extern void atomic64_sub(u64 delta, atomic64_t *ptr);
/**
* atomic64_sub_and_test - subtract value from variable and test result
@@ -409,13 +362,7 @@
* true if the result is zero, or false for all
* other cases.
*/
-static inline int
-atomic64_sub_and_test(unsigned long long delta, atomic64_t *ptr)
-{
- unsigned long long old_val = atomic64_sub_return(delta, ptr);
-
- return old_val == 0;
-}
+extern int atomic64_sub_and_test(u64 delta, atomic64_t *ptr);
/**
* atomic64_inc - increment atomic64 variable
@@ -423,10 +370,7 @@
*
* Atomically increments @ptr by 1.
*/
-static inline void atomic64_inc(atomic64_t *ptr)
-{
- atomic64_add(1, ptr);
-}
+extern void atomic64_inc(atomic64_t *ptr);
/**
* atomic64_dec - decrement atomic64 variable
@@ -434,10 +378,7 @@
*
* Atomically decrements @ptr by 1.
*/
-static inline void atomic64_dec(atomic64_t *ptr)
-{
- atomic64_sub(1, ptr);
-}
+extern void atomic64_dec(atomic64_t *ptr);
/**
* atomic64_dec_and_test - decrement and test
@@ -447,10 +388,7 @@
* returns true if the result is 0, or false for all other
* cases.
*/
-static inline int atomic64_dec_and_test(atomic64_t *ptr)
-{
- return atomic64_sub_and_test(1, ptr);
-}
+extern int atomic64_dec_and_test(atomic64_t *ptr);
/**
* atomic64_inc_and_test - increment and test
@@ -460,10 +398,7 @@
* and returns true if the result is zero, or false for all
* other cases.
*/
-static inline int atomic64_inc_and_test(atomic64_t *ptr)
-{
- return atomic64_sub_and_test(-1, ptr);
-}
+extern int atomic64_inc_and_test(atomic64_t *ptr);
/**
* atomic64_add_negative - add and test if negative
@@ -474,13 +409,7 @@
* if the result is negative, or false when
* result is greater than or equal to zero.
*/
-static inline int
-atomic64_add_negative(unsigned long long delta, atomic64_t *ptr)
-{
- long long old_val = atomic64_add_return(delta, ptr);
-
- return old_val < 0;
-}
+extern int atomic64_add_negative(u64 delta, atomic64_t *ptr);
#include <asm-generic/atomic-long.h>
#endif /* _ASM_X86_ATOMIC_32_H */
diff --git a/arch/x86/include/asm/atomic_64.h b/arch/x86/include/asm/atomic_64.h
index 0d63602..d605dc2 100644
--- a/arch/x86/include/asm/atomic_64.h
+++ b/arch/x86/include/asm/atomic_64.h
@@ -18,7 +18,10 @@
*
* Atomically reads the value of @v.
*/
-#define atomic_read(v) ((v)->counter)
+static inline int atomic_read(const atomic_t *v)
+{
+ return v->counter;
+}
/**
* atomic_set - set atomic variable
@@ -27,7 +30,10 @@
*
* Atomically sets the value of @v to @i.
*/
-#define atomic_set(v, i) (((v)->counter) = (i))
+static inline void atomic_set(atomic_t *v, int i)
+{
+ v->counter = i;
+}
/**
* atomic_add - add integer to atomic variable
@@ -192,7 +198,10 @@
* Atomically reads the value of @v.
* Doesn't imply a read memory barrier.
*/
-#define atomic64_read(v) ((v)->counter)
+static inline long atomic64_read(const atomic64_t *v)
+{
+ return v->counter;
+}
/**
* atomic64_set - set atomic64 variable
@@ -201,7 +210,10 @@
*
* Atomically sets the value of @v to @i.
*/
-#define atomic64_set(v, i) (((v)->counter) = (i))
+static inline void atomic64_set(atomic64_t *v, long i)
+{
+ v->counter = i;
+}
/**
* atomic64_add - add integer to atomic64 variable
@@ -355,11 +367,25 @@
#define atomic64_inc_return(v) (atomic64_add_return(1, (v)))
#define atomic64_dec_return(v) (atomic64_sub_return(1, (v)))
-#define atomic64_cmpxchg(v, old, new) (cmpxchg(&((v)->counter), (old), (new)))
-#define atomic64_xchg(v, new) (xchg(&((v)->counter), new))
+static inline long atomic64_cmpxchg(atomic64_t *v, long old, long new)
+{
+ return cmpxchg(&v->counter, old, new);
+}
-#define atomic_cmpxchg(v, old, new) (cmpxchg(&((v)->counter), (old), (new)))
-#define atomic_xchg(v, new) (xchg(&((v)->counter), (new)))
+static inline long atomic64_xchg(atomic64_t *v, long new)
+{
+ return xchg(&v->counter, new);
+}
+
+static inline long atomic_cmpxchg(atomic_t *v, int old, int new)
+{
+ return cmpxchg(&v->counter, old, new);
+}
+
+static inline long atomic_xchg(atomic_t *v, int new)
+{
+ return xchg(&v->counter, new);
+}
/**
* atomic_add_unless - add unless the number is a given value
diff --git a/arch/x86/include/asm/boot.h b/arch/x86/include/asm/boot.h
index 418e632..7a10659 100644
--- a/arch/x86/include/asm/boot.h
+++ b/arch/x86/include/asm/boot.h
@@ -8,7 +8,7 @@
#ifdef __KERNEL__
-#include <asm/page_types.h>
+#include <asm/pgtable_types.h>
/* Physical address where kernel should be loaded. */
#define LOAD_PHYSICAL_ADDR ((CONFIG_PHYSICAL_START \
@@ -16,10 +16,10 @@
& ~(CONFIG_PHYSICAL_ALIGN - 1))
/* Minimum kernel alignment, as a power of two */
-#ifdef CONFIG_x86_64
+#ifdef CONFIG_X86_64
#define MIN_KERNEL_ALIGN_LG2 PMD_SHIFT
#else
-#define MIN_KERNEL_ALIGN_LG2 (PAGE_SHIFT+1)
+#define MIN_KERNEL_ALIGN_LG2 (PAGE_SHIFT + THREAD_ORDER)
#endif
#define MIN_KERNEL_ALIGN (_AC(1, UL) << MIN_KERNEL_ALIGN_LG2)
diff --git a/arch/x86/include/asm/fixmap.h b/arch/x86/include/asm/fixmap.h
index 2d81af3..7b2d71d 100644
--- a/arch/x86/include/asm/fixmap.h
+++ b/arch/x86/include/asm/fixmap.h
@@ -111,12 +111,9 @@
#ifdef CONFIG_PARAVIRT
FIX_PARAVIRT_BOOTMAP,
#endif
- FIX_TEXT_POKE0, /* reserve 2 pages for text_poke() */
- FIX_TEXT_POKE1,
+ FIX_TEXT_POKE1, /* reserve 2 pages for text_poke() */
+ FIX_TEXT_POKE0, /* first page is last, because allocation is backward */
__end_of_permanent_fixed_addresses,
-#ifdef CONFIG_PROVIDE_OHCI1394_DMA_INIT
- FIX_OHCI1394_BASE,
-#endif
/*
* 256 temporary boot-time mappings, used by early_ioremap(),
* before ioremap() is functional.
@@ -129,6 +126,9 @@
FIX_BTMAP_END = __end_of_permanent_fixed_addresses + 256 -
(__end_of_permanent_fixed_addresses & 255),
FIX_BTMAP_BEGIN = FIX_BTMAP_END + NR_FIX_BTMAPS*FIX_BTMAPS_SLOTS - 1,
+#ifdef CONFIG_PROVIDE_OHCI1394_DMA_INIT
+ FIX_OHCI1394_BASE,
+#endif
#ifdef CONFIG_X86_32
FIX_WP_TEST,
#endif
diff --git a/arch/x86/include/asm/msr-index.h b/arch/x86/include/asm/msr-index.h
index 1692fb5..6be7fc2 100644
--- a/arch/x86/include/asm/msr-index.h
+++ b/arch/x86/include/asm/msr-index.h
@@ -246,10 +246,6 @@
#define MSR_IA32_MISC_ENABLE_TURBO_DISABLE (1ULL << 38)
#define MSR_IA32_MISC_ENABLE_IP_PREF_DISABLE (1ULL << 39)
-/* Intel Model 6 */
-#define MSR_P6_EVNTSEL0 0x00000186
-#define MSR_P6_EVNTSEL1 0x00000187
-
/* P4/Xeon+ specific */
#define MSR_IA32_MCG_EAX 0x00000180
#define MSR_IA32_MCG_EBX 0x00000181
diff --git a/arch/x86/include/asm/nmi.h b/arch/x86/include/asm/nmi.h
index c972644..c86e5ed4 100644
--- a/arch/x86/include/asm/nmi.h
+++ b/arch/x86/include/asm/nmi.h
@@ -72,7 +72,6 @@
int lapic_watchdog_init(unsigned nmi_hz);
int lapic_wd_event(unsigned nmi_hz);
unsigned lapic_adjust_nmi_hz(unsigned hz);
-int lapic_watchdog_ok(void);
void disable_lapic_nmi_watchdog(void);
void enable_lapic_nmi_watchdog(void);
void stop_nmi(void);
diff --git a/arch/x86/include/asm/pci.h b/arch/x86/include/asm/pci.h
index 927958d..1ff685c 100644
--- a/arch/x86/include/asm/pci.h
+++ b/arch/x86/include/asm/pci.h
@@ -91,7 +91,7 @@
#define PCI_DMA_BUS_IS_PHYS (dma_ops->is_phys)
-#if defined(CONFIG_X86_64) || defined(CONFIG_DMA_API_DEBUG)
+#if defined(CONFIG_X86_64) || defined(CONFIG_DMAR) || defined(CONFIG_DMA_API_DEBUG)
#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME) \
dma_addr_t ADDR_NAME;
diff --git a/arch/x86/include/asm/percpu.h b/arch/x86/include/asm/percpu.h
index 02ecb30..103f1dd 100644
--- a/arch/x86/include/asm/percpu.h
+++ b/arch/x86/include/asm/percpu.h
@@ -42,6 +42,7 @@
#else /* ...!ASSEMBLY */
+#include <linux/kernel.h>
#include <linux/stringify.h>
#ifdef CONFIG_SMP
@@ -155,6 +156,15 @@
/* We can use this directly for local CPU (faster). */
DECLARE_PER_CPU(unsigned long, this_cpu_off);
+#ifdef CONFIG_NEED_MULTIPLE_NODES
+void *pcpu_lpage_remapped(void *kaddr);
+#else
+static inline void *pcpu_lpage_remapped(void *kaddr)
+{
+ return NULL;
+}
+#endif
+
#endif /* !__ASSEMBLY__ */
#ifdef CONFIG_SMP
diff --git a/arch/x86/include/asm/perf_counter.h b/arch/x86/include/asm/perf_counter.h
index 5fb33e1..fa64e40 100644
--- a/arch/x86/include/asm/perf_counter.h
+++ b/arch/x86/include/asm/perf_counter.h
@@ -87,6 +87,9 @@
#ifdef CONFIG_PERF_COUNTERS
extern void init_hw_perf_counters(void);
extern void perf_counters_lapic_init(void);
+
+#define PERF_COUNTER_INDEX_OFFSET 0
+
#else
static inline void init_hw_perf_counters(void) { }
static inline void perf_counters_lapic_init(void) { }
diff --git a/arch/x86/include/asm/proto.h b/arch/x86/include/asm/proto.h
index 49fb3ec..621f56d 100644
--- a/arch/x86/include/asm/proto.h
+++ b/arch/x86/include/asm/proto.h
@@ -22,7 +22,14 @@
long do_arch_prctl(struct task_struct *task, int code, unsigned long addr);
-#define round_up(x, y) (((x) + (y) - 1) & ~((y) - 1))
-#define round_down(x, y) ((x) & ~((y) - 1))
+/*
+ * This looks more complex than it should be. But we need to
+ * get the type for the ~ right in round_down (it needs to be
+ * as wide as the result!), and we want to evaluate the macro
+ * arguments just once each.
+ */
+#define __round_mask(x,y) ((__typeof__(x))((y)-1))
+#define round_up(x,y) ((((x)-1) | __round_mask(x,y))+1)
+#define round_down(x,y) ((x) & ~__round_mask(x,y))
#endif /* _ASM_X86_PROTO_H */
diff --git a/arch/x86/include/asm/spinlock.h b/arch/x86/include/asm/spinlock.h
index b7e5db8..4e77853 100644
--- a/arch/x86/include/asm/spinlock.h
+++ b/arch/x86/include/asm/spinlock.h
@@ -302,4 +302,8 @@
#define _raw_read_relax(lock) cpu_relax()
#define _raw_write_relax(lock) cpu_relax()
+/* The {read|write|spin}_lock() on x86 are full memory barriers. */
+static inline void smp_mb__after_lock(void) { }
+#define ARCH_HAS_SMP_MB_AFTER_LOCK
+
#endif /* _ASM_X86_SPINLOCK_H */
diff --git a/arch/x86/include/asm/stacktrace.h b/arch/x86/include/asm/stacktrace.h
index f517944..cf86a5e 100644
--- a/arch/x86/include/asm/stacktrace.h
+++ b/arch/x86/include/asm/stacktrace.h
@@ -3,6 +3,8 @@
extern int kstack_depth_to_print;
+int x86_is_stack_id(int id, char *name);
+
/* Generic stack tracer with callbacks */
struct stacktrace_ops {
diff --git a/arch/x86/include/asm/thread_info.h b/arch/x86/include/asm/thread_info.h
index b078352..fad7d40 100644
--- a/arch/x86/include/asm/thread_info.h
+++ b/arch/x86/include/asm/thread_info.h
@@ -49,7 +49,7 @@
.exec_domain = &default_exec_domain, \
.flags = 0, \
.cpu = 0, \
- .preempt_count = 1, \
+ .preempt_count = INIT_PREEMPT_COUNT, \
.addr_limit = KERNEL_DS, \
.restart_block = { \
.fn = do_no_restart_syscall, \
diff --git a/arch/x86/kernel/Makefile b/arch/x86/kernel/Makefile
index 6c327b8..430d5b2 100644
--- a/arch/x86/kernel/Makefile
+++ b/arch/x86/kernel/Makefile
@@ -26,6 +26,8 @@
CFLAGS_paravirt.o := $(nostackp)
GCOV_PROFILE_vsyscall_64.o := n
GCOV_PROFILE_hpet.o := n
+GCOV_PROFILE_tsc.o := n
+GCOV_PROFILE_paravirt.o := n
obj-y := process_$(BITS).o signal.o entry_$(BITS).o
obj-y += traps.o irq.o irq_$(BITS).o dumpstack_$(BITS).o
diff --git a/arch/x86/kernel/amd_iommu.c b/arch/x86/kernel/amd_iommu.c
index 9372f04..6c99f50 100644
--- a/arch/x86/kernel/amd_iommu.c
+++ b/arch/x86/kernel/amd_iommu.c
@@ -1192,7 +1192,7 @@
return 0;
}
-struct notifier_block device_nb = {
+static struct notifier_block device_nb = {
.notifier_call = device_change_notifier,
};
@@ -1763,7 +1763,7 @@
flag |= __GFP_ZERO;
virt_addr = (void *)__get_free_pages(flag, get_order(size));
if (!virt_addr)
- return 0;
+ return NULL;
paddr = virt_to_phys(virt_addr);
diff --git a/arch/x86/kernel/amd_iommu_init.c b/arch/x86/kernel/amd_iommu_init.c
index 10b2acc..c1b17e9 100644
--- a/arch/x86/kernel/amd_iommu_init.c
+++ b/arch/x86/kernel/amd_iommu_init.c
@@ -472,6 +472,8 @@
if (iommu->evt_buf == NULL)
return NULL;
+ iommu->evt_buf_size = EVT_BUFFER_SIZE;
+
return iommu->evt_buf;
}
@@ -691,6 +693,7 @@
devid = e->devid;
devid_to = e->ext >> 8;
+ set_dev_entry_from_acpi(iommu, devid , e->flags, 0);
set_dev_entry_from_acpi(iommu, devid_to, e->flags, 0);
amd_iommu_alias_table[devid] = devid_to;
break;
@@ -749,11 +752,13 @@
devid = e->devid;
for (dev_i = devid_start; dev_i <= devid; ++dev_i) {
- if (alias)
+ if (alias) {
amd_iommu_alias_table[dev_i] = devid_to;
- set_dev_entry_from_acpi(iommu,
- amd_iommu_alias_table[dev_i],
- flags, ext_flags);
+ set_dev_entry_from_acpi(iommu,
+ devid_to, flags, ext_flags);
+ }
+ set_dev_entry_from_acpi(iommu, dev_i,
+ flags, ext_flags);
}
break;
default:
diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c
index 8c7c042..0a1c283 100644
--- a/arch/x86/kernel/apic/apic.c
+++ b/arch/x86/kernel/apic/apic.c
@@ -140,7 +140,6 @@
#ifdef CONFIG_X86_X2APIC
/* x2apic enabled before OS handover */
static int x2apic_preenabled;
-static int disable_x2apic;
static __init int setup_nox2apic(char *str)
{
if (x2apic_enabled()) {
@@ -149,7 +148,6 @@
return 0;
}
- disable_x2apic = 1;
setup_clear_cpu_cap(X86_FEATURE_X2APIC);
return 0;
}
diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c
index 4d0216f..90b5e6e 100644
--- a/arch/x86/kernel/apic/io_apic.c
+++ b/arch/x86/kernel/apic/io_apic.c
@@ -1716,25 +1716,19 @@
return;
}
-__apicdebuginit(void) print_APIC_bitfield(int base)
+__apicdebuginit(void) print_APIC_field(int base)
{
- unsigned int v;
- int i, j;
+ int i;
if (apic_verbosity == APIC_QUIET)
return;
- printk(KERN_DEBUG "0123456789abcdef0123456789abcdef\n" KERN_DEBUG);
- for (i = 0; i < 8; i++) {
- v = apic_read(base + i*0x10);
- for (j = 0; j < 32; j++) {
- if (v & (1<<j))
- printk("1");
- else
- printk("0");
- }
- printk("\n");
- }
+ printk(KERN_DEBUG);
+
+ for (i = 0; i < 8; i++)
+ printk(KERN_CONT "%08x", apic_read(base + i*0x10));
+
+ printk(KERN_CONT "\n");
}
__apicdebuginit(void) print_local_APIC(void *dummy)
@@ -1745,7 +1739,7 @@
if (apic_verbosity == APIC_QUIET)
return;
- printk("\n" KERN_DEBUG "printing local APIC contents on CPU#%d/%d:\n",
+ printk(KERN_DEBUG "printing local APIC contents on CPU#%d/%d:\n",
smp_processor_id(), hard_smp_processor_id());
v = apic_read(APIC_ID);
printk(KERN_INFO "... APIC ID: %08x (%01x)\n", v, read_apic_id());
@@ -1786,11 +1780,11 @@
printk(KERN_DEBUG "... APIC SPIV: %08x\n", v);
printk(KERN_DEBUG "... APIC ISR field:\n");
- print_APIC_bitfield(APIC_ISR);
+ print_APIC_field(APIC_ISR);
printk(KERN_DEBUG "... APIC TMR field:\n");
- print_APIC_bitfield(APIC_TMR);
+ print_APIC_field(APIC_TMR);
printk(KERN_DEBUG "... APIC IRR field:\n");
- print_APIC_bitfield(APIC_IRR);
+ print_APIC_field(APIC_IRR);
if (APIC_INTEGRATED(ver)) { /* !82489DX */
if (maxlvt > 3) /* Due to the Pentium erratum 3AP. */
diff --git a/arch/x86/kernel/cpu/amd.c b/arch/x86/kernel/cpu/amd.c
index e5b27d8..28e5f59 100644
--- a/arch/x86/kernel/cpu/amd.c
+++ b/arch/x86/kernel/cpu/amd.c
@@ -258,13 +258,15 @@
{
#ifdef CONFIG_X86_HT
unsigned bits;
+ int cpu = smp_processor_id();
bits = c->x86_coreid_bits;
-
/* Low order bits define the core id (index of core in socket) */
c->cpu_core_id = c->initial_apicid & ((1 << bits)-1);
/* Convert the initial APIC ID into the socket ID */
c->phys_proc_id = c->initial_apicid >> bits;
+ /* use socket ID also for last level cache */
+ per_cpu(cpu_llc_id, cpu) = c->phys_proc_id;
#endif
}
diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c
index 6b26d4d..f1961c0 100644
--- a/arch/x86/kernel/cpu/common.c
+++ b/arch/x86/kernel/cpu/common.c
@@ -848,9 +848,6 @@
#if defined(CONFIG_NUMA) && defined(CONFIG_X86_64)
numa_add_cpu(smp_processor_id());
#endif
-
- /* Cap the iomem address space to what is addressable on all CPUs */
- iomem_resource.end &= (1ULL << c->x86_phys_bits) - 1;
}
#ifdef CONFIG_X86_64
diff --git a/arch/x86/kernel/cpu/cpufreq/powernow-k8.c b/arch/x86/kernel/cpu/cpufreq/powernow-k8.c
index 81cbe64..2a50ef8 100644
--- a/arch/x86/kernel/cpu/cpufreq/powernow-k8.c
+++ b/arch/x86/kernel/cpu/cpufreq/powernow-k8.c
@@ -299,7 +299,7 @@
static int transition_fid_vid(struct powernow_k8_data *data,
u32 reqfid, u32 reqvid)
{
- if (core_voltage_pre_transition(data, reqvid))
+ if (core_voltage_pre_transition(data, reqvid, reqfid))
return 1;
if (core_frequency_transition(data, reqfid))
@@ -327,17 +327,20 @@
/* Phase 1 - core voltage transition ... setup voltage */
static int core_voltage_pre_transition(struct powernow_k8_data *data,
- u32 reqvid)
+ u32 reqvid, u32 reqfid)
{
u32 rvosteps = data->rvo;
u32 savefid = data->currfid;
- u32 maxvid, lo;
+ u32 maxvid, lo, rvomult = 1;
dprintk("ph1 (cpu%d): start, currfid 0x%x, currvid 0x%x, "
"reqvid 0x%x, rvo 0x%x\n",
smp_processor_id(),
data->currfid, data->currvid, reqvid, data->rvo);
+ if ((savefid < LO_FID_TABLE_TOP) && (reqfid < LO_FID_TABLE_TOP))
+ rvomult = 2;
+ rvosteps *= rvomult;
rdmsr(MSR_FIDVID_STATUS, lo, maxvid);
maxvid = 0x1f & (maxvid >> 16);
dprintk("ph1 maxvid=0x%x\n", maxvid);
@@ -351,7 +354,8 @@
return 1;
}
- while ((rvosteps > 0) && ((data->rvo + data->currvid) > reqvid)) {
+ while ((rvosteps > 0) &&
+ ((rvomult * data->rvo + data->currvid) > reqvid)) {
if (data->currvid == maxvid) {
rvosteps = 0;
} else {
@@ -384,13 +388,6 @@
u32 vcoreqfid, vcocurrfid, vcofiddiff;
u32 fid_interval, savevid = data->currvid;
- if ((reqfid < HI_FID_TABLE_BOTTOM) &&
- (data->currfid < HI_FID_TABLE_BOTTOM)) {
- printk(KERN_ERR PFX "ph2: illegal lo-lo transition "
- "0x%x 0x%x\n", reqfid, data->currfid);
- return 1;
- }
-
if (data->currfid == reqfid) {
printk(KERN_ERR PFX "ph2 null fid transition 0x%x\n",
data->currfid);
@@ -407,6 +404,9 @@
vcofiddiff = vcocurrfid > vcoreqfid ? vcocurrfid - vcoreqfid
: vcoreqfid - vcocurrfid;
+ if ((reqfid <= LO_FID_TABLE_TOP) && (data->currfid <= LO_FID_TABLE_TOP))
+ vcofiddiff = 0;
+
while (vcofiddiff > 2) {
(data->currfid & 1) ? (fid_interval = 1) : (fid_interval = 2);
@@ -1081,14 +1081,6 @@
return 0;
}
- if ((fid < HI_FID_TABLE_BOTTOM) &&
- (data->currfid < HI_FID_TABLE_BOTTOM)) {
- printk(KERN_ERR PFX
- "ignoring illegal change in lo freq table-%x to 0x%x\n",
- data->currfid, fid);
- return 1;
- }
-
dprintk("cpu %d, changing to fid 0x%x, vid 0x%x\n",
smp_processor_id(), fid, vid);
freqs.old = find_khz_freq_from_fid(data->currfid);
@@ -1267,7 +1259,7 @@
{
static const char ACPI_PSS_BIOS_BUG_MSG[] =
KERN_ERR FW_BUG PFX "No compatible ACPI _PSS objects found.\n"
- KERN_ERR FW_BUG PFX "Try again with latest BIOS.\n";
+ FW_BUG PFX "Try again with latest BIOS.\n";
struct powernow_k8_data *data;
struct init_on_cpu init_on_cpu;
int rc;
diff --git a/arch/x86/kernel/cpu/cpufreq/powernow-k8.h b/arch/x86/kernel/cpu/cpufreq/powernow-k8.h
index c9c1190..02ce824 100644
--- a/arch/x86/kernel/cpu/cpufreq/powernow-k8.h
+++ b/arch/x86/kernel/cpu/cpufreq/powernow-k8.h
@@ -215,7 +215,8 @@
#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, "powernow-k8", msg)
-static int core_voltage_pre_transition(struct powernow_k8_data *data, u32 reqvid);
+static int core_voltage_pre_transition(struct powernow_k8_data *data,
+ u32 reqvid, u32 regfid);
static int core_voltage_post_transition(struct powernow_k8_data *data, u32 reqvid);
static int core_frequency_transition(struct powernow_k8_data *data, u32 reqfid);
diff --git a/arch/x86/kernel/cpu/mcheck/mce.c b/arch/x86/kernel/cpu/mcheck/mce.c
index 284d1de..484c1e5 100644
--- a/arch/x86/kernel/cpu/mcheck/mce.c
+++ b/arch/x86/kernel/cpu/mcheck/mce.c
@@ -194,14 +194,14 @@
m->cs, m->ip);
if (m->cs == __KERNEL_CS)
print_symbol("{%s}", m->ip);
- printk("\n");
+ printk(KERN_CONT "\n");
}
printk(KERN_EMERG "TSC %llx ", m->tsc);
if (m->addr)
- printk("ADDR %llx ", m->addr);
+ printk(KERN_CONT "ADDR %llx ", m->addr);
if (m->misc)
- printk("MISC %llx ", m->misc);
- printk("\n");
+ printk(KERN_CONT "MISC %llx ", m->misc);
+ printk(KERN_CONT "\n");
printk(KERN_EMERG "PROCESSOR %u:%x TIME %llu SOCKET %u APIC %x\n",
m->cpuvendor, m->cpuid, m->time, m->socketid,
m->apicid);
@@ -209,13 +209,13 @@
static void print_mce_head(void)
{
- printk(KERN_EMERG "\n" KERN_EMERG "HARDWARE ERROR\n");
+ printk(KERN_EMERG "\nHARDWARE ERROR\n");
}
static void print_mce_tail(void)
{
printk(KERN_EMERG "This is not a software problem!\n"
- KERN_EMERG "Run through mcelog --ascii to decode and contact your hardware vendor\n");
+ "Run through mcelog --ascii to decode and contact your hardware vendor\n");
}
#define PANIC_TIMEOUT 5 /* 5 seconds */
@@ -1117,7 +1117,7 @@
*n = min(*n*2, (int)round_jiffies_relative(check_interval*HZ));
t->expires = jiffies + *n;
- add_timer(t);
+ add_timer_on(t, smp_processor_id());
}
static void mce_do_trigger(struct work_struct *work)
@@ -1321,7 +1321,7 @@
return;
setup_timer(t, mcheck_timer, smp_processor_id());
t->expires = round_jiffies(jiffies + *n);
- add_timer(t);
+ add_timer_on(t, smp_processor_id());
}
/*
diff --git a/arch/x86/kernel/cpu/perf_counter.c b/arch/x86/kernel/cpu/perf_counter.c
index 76dfef2..36c3dc7 100644
--- a/arch/x86/kernel/cpu/perf_counter.c
+++ b/arch/x86/kernel/cpu/perf_counter.c
@@ -401,7 +401,7 @@
[ C(RESULT_MISS) ] = 0x0041, /* Data Cache Misses */
},
[ C(OP_WRITE) ] = {
- [ C(RESULT_ACCESS) ] = 0x0042, /* Data Cache Refills from L2 */
+ [ C(RESULT_ACCESS) ] = 0x0142, /* Data Cache Refills :system */
[ C(RESULT_MISS) ] = 0,
},
[ C(OP_PREFETCH) ] = {
@@ -912,6 +912,8 @@
err = checking_wrmsrl(hwc->counter_base + idx,
(u64)(-left) & x86_pmu.counter_mask);
+ perf_counter_update_userpage(counter);
+
return ret;
}
@@ -969,13 +971,6 @@
if (!x86_pmu.num_counters_fixed)
return -1;
- /*
- * Quirk, IA32_FIXED_CTRs do not work on current Atom processors:
- */
- if (boot_cpu_data.x86_vendor == X86_VENDOR_INTEL &&
- boot_cpu_data.x86_model == 28)
- return -1;
-
event = hwc->config & ARCH_PERFMON_EVENT_MASK;
if (unlikely(event == x86_pmu.event_map(PERF_COUNT_HW_INSTRUCTIONS)))
@@ -1041,6 +1036,8 @@
x86_perf_counter_set_period(counter, hwc, idx);
x86_pmu.enable(hwc, idx);
+ perf_counter_update_userpage(counter);
+
return 0;
}
@@ -1133,6 +1130,8 @@
x86_perf_counter_update(counter, hwc, idx);
cpuc->counters[idx] = NULL;
clear_bit(idx, cpuc->used_mask);
+
+ perf_counter_update_userpage(counter);
}
/*
@@ -1428,8 +1427,6 @@
*/
x86_pmu.num_counters_fixed = max((int)edx.split.num_counters_fixed, 3);
- rdmsrl(MSR_CORE_PERF_GLOBAL_CTRL, x86_pmu.intel_ctrl);
-
/*
* Install the hw-cache-events table:
*/
@@ -1499,21 +1496,22 @@
pr_cont("%s PMU driver.\n", x86_pmu.name);
if (x86_pmu.num_counters > X86_PMC_MAX_GENERIC) {
- x86_pmu.num_counters = X86_PMC_MAX_GENERIC;
WARN(1, KERN_ERR "hw perf counters %d > max(%d), clipping!",
x86_pmu.num_counters, X86_PMC_MAX_GENERIC);
+ x86_pmu.num_counters = X86_PMC_MAX_GENERIC;
}
perf_counter_mask = (1 << x86_pmu.num_counters) - 1;
perf_max_counters = x86_pmu.num_counters;
if (x86_pmu.num_counters_fixed > X86_PMC_MAX_FIXED) {
- x86_pmu.num_counters_fixed = X86_PMC_MAX_FIXED;
WARN(1, KERN_ERR "hw perf counters fixed %d > max(%d), clipping!",
x86_pmu.num_counters_fixed, X86_PMC_MAX_FIXED);
+ x86_pmu.num_counters_fixed = X86_PMC_MAX_FIXED;
}
perf_counter_mask |=
((1LL << x86_pmu.num_counters_fixed)-1) << X86_PMC_IDX_FIXED;
+ x86_pmu.intel_ctrl = perf_counter_mask;
perf_counters_lapic_init();
register_die_notifier(&perf_counter_nmi_notifier);
@@ -1563,6 +1561,7 @@
static DEFINE_PER_CPU(struct perf_callchain_entry, irq_entry);
static DEFINE_PER_CPU(struct perf_callchain_entry, nmi_entry);
+static DEFINE_PER_CPU(int, in_nmi_frame);
static void
@@ -1578,7 +1577,9 @@
static int backtrace_stack(void *data, char *name)
{
- /* Process all stacks: */
+ per_cpu(in_nmi_frame, smp_processor_id()) =
+ x86_is_stack_id(NMI_STACK, name);
+
return 0;
}
@@ -1586,6 +1587,9 @@
{
struct perf_callchain_entry *entry = data;
+ if (per_cpu(in_nmi_frame, smp_processor_id()))
+ return;
+
if (reliable)
callchain_store(entry, addr);
}
diff --git a/arch/x86/kernel/cpu/perfctr-watchdog.c b/arch/x86/kernel/cpu/perfctr-watchdog.c
index 5c481f6..e60ed74 100644
--- a/arch/x86/kernel/cpu/perfctr-watchdog.c
+++ b/arch/x86/kernel/cpu/perfctr-watchdog.c
@@ -803,8 +803,3 @@
wd_ops->rearm(wd, nmi_hz);
return 1;
}
-
-int lapic_watchdog_ok(void)
-{
- return wd_ops != NULL;
-}
diff --git a/arch/x86/kernel/dumpstack.c b/arch/x86/kernel/dumpstack.c
index 95ea5fa..c8405718 100644
--- a/arch/x86/kernel/dumpstack.c
+++ b/arch/x86/kernel/dumpstack.c
@@ -22,6 +22,7 @@
#include "dumpstack.h"
int panic_on_unrecovered_nmi;
+int panic_on_io_nmi;
unsigned int code_bytes = 64;
int kstack_depth_to_print = 3 * STACKSLOTS_PER_LINE;
static int die_counter;
diff --git a/arch/x86/kernel/dumpstack_32.c b/arch/x86/kernel/dumpstack_32.c
index d593cd1..bca5fba 100644
--- a/arch/x86/kernel/dumpstack_32.c
+++ b/arch/x86/kernel/dumpstack_32.c
@@ -19,6 +19,12 @@
#include "dumpstack.h"
+/* Just a stub for now */
+int x86_is_stack_id(int id, char *name)
+{
+ return 0;
+}
+
void dump_trace(struct task_struct *task, struct pt_regs *regs,
unsigned long *stack, unsigned long bp,
const struct stacktrace_ops *ops, void *data)
diff --git a/arch/x86/kernel/dumpstack_64.c b/arch/x86/kernel/dumpstack_64.c
index d35db59..54b0a32 100644
--- a/arch/x86/kernel/dumpstack_64.c
+++ b/arch/x86/kernel/dumpstack_64.c
@@ -19,10 +19,8 @@
#include "dumpstack.h"
-static unsigned long *in_exception_stack(unsigned cpu, unsigned long stack,
- unsigned *usedp, char **idp)
-{
- static char ids[][8] = {
+
+static char x86_stack_ids[][8] = {
[DEBUG_STACK - 1] = "#DB",
[NMI_STACK - 1] = "NMI",
[DOUBLEFAULT_STACK - 1] = "#DF",
@@ -33,6 +31,15 @@
N_EXCEPTION_STACKS + DEBUG_STKSZ / EXCEPTION_STKSZ - 2] = "#DB[?]"
#endif
};
+
+int x86_is_stack_id(int id, char *name)
+{
+ return x86_stack_ids[id - 1] == name;
+}
+
+static unsigned long *in_exception_stack(unsigned cpu, unsigned long stack,
+ unsigned *usedp, char **idp)
+{
unsigned k;
/*
@@ -61,7 +68,7 @@
if (*usedp & (1U << k))
break;
*usedp |= 1U << k;
- *idp = ids[k];
+ *idp = x86_stack_ids[k];
return (unsigned long *)end;
}
/*
@@ -81,12 +88,13 @@
do {
++j;
end -= EXCEPTION_STKSZ;
- ids[j][4] = '1' + (j - N_EXCEPTION_STACKS);
+ x86_stack_ids[j][4] = '1' +
+ (j - N_EXCEPTION_STACKS);
} while (stack < end - EXCEPTION_STKSZ);
if (*usedp & (1U << j))
break;
*usedp |= 1U << j;
- *idp = ids[j];
+ *idp = x86_stack_ids[j];
return (unsigned long *)end;
}
#endif
diff --git a/arch/x86/kernel/e820.c b/arch/x86/kernel/e820.c
index 7271fa3..5cb5725 100644
--- a/arch/x86/kernel/e820.c
+++ b/arch/x86/kernel/e820.c
@@ -627,10 +627,9 @@
#ifdef CONFIG_X86_64
if (!found) {
gapstart = (max_pfn << PAGE_SHIFT) + 1024*1024;
- printk(KERN_ERR "PCI: Warning: Cannot find a gap in the 32bit "
- "address range\n"
- KERN_ERR "PCI: Unassigned devices with 32bit resource "
- "registers may break!\n");
+ printk(KERN_ERR
+ "PCI: Warning: Cannot find a gap in the 32bit address range\n"
+ "PCI: Unassigned devices with 32bit resource registers may break!\n");
}
#endif
@@ -1383,6 +1382,8 @@
return 32*1024*1024;
}
+#define MAX_RESOURCE_SIZE ((resource_size_t)-1)
+
void __init e820_reserve_resources_late(void)
{
int i;
@@ -1400,17 +1401,19 @@
* avoid stolen RAM:
*/
for (i = 0; i < e820.nr_map; i++) {
- struct e820entry *entry = &e820_saved.map[i];
- resource_size_t start, end;
+ struct e820entry *entry = &e820.map[i];
+ u64 start, end;
if (entry->type != E820_RAM)
continue;
start = entry->addr + entry->size;
- end = round_up(start, ram_alignment(start));
- if (start == end)
+ end = round_up(start, ram_alignment(start)) - 1;
+ if (end > MAX_RESOURCE_SIZE)
+ end = MAX_RESOURCE_SIZE;
+ if (start >= end)
continue;
- reserve_region_with_split(&iomem_resource, start,
- end - 1, "RAM buffer");
+ reserve_region_with_split(&iomem_resource, start, end,
+ "RAM buffer");
}
}
diff --git a/arch/x86/kernel/kvm.c b/arch/x86/kernel/kvm.c
index a78ecad..c664d51 100644
--- a/arch/x86/kernel/kvm.c
+++ b/arch/x86/kernel/kvm.c
@@ -200,7 +200,7 @@
state->mode = paravirt_get_lazy_mode();
}
-static void paravirt_ops_setup(void)
+static void __init paravirt_ops_setup(void)
{
pv_info.name = "KVM";
pv_info.paravirt_enabled = 1;
diff --git a/arch/x86/kernel/pci-dma.c b/arch/x86/kernel/pci-dma.c
index 4763047..1a041bc 100644
--- a/arch/x86/kernel/pci-dma.c
+++ b/arch/x86/kernel/pci-dma.c
@@ -211,11 +211,11 @@
#ifdef CONFIG_SWIOTLB
if (!strncmp(p, "soft", 4))
swiotlb = 1;
+#endif
if (!strncmp(p, "pt", 2)) {
iommu_pass_through = 1;
return 1;
}
-#endif
gart_parse_options(p);
diff --git a/arch/x86/kernel/pci-gart_64.c b/arch/x86/kernel/pci-gart_64.c
index cfd9f90..d2e56b8 100644
--- a/arch/x86/kernel/pci-gart_64.c
+++ b/arch/x86/kernel/pci-gart_64.c
@@ -675,7 +675,7 @@
nommu:
/* Should not happen anymore */
printk(KERN_WARNING "PCI-DMA: More than 4GB of RAM and no IOMMU\n"
- KERN_WARNING "falling back to iommu=soft.\n");
+ "falling back to iommu=soft.\n");
return -1;
}
diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c
index be5ae80..de2cab1 100644
--- a/arch/x86/kernel/setup.c
+++ b/arch/x86/kernel/setup.c
@@ -289,6 +289,20 @@
return ret;
}
+#ifdef CONFIG_X86_64
+static void __init init_gbpages(void)
+{
+ if (direct_gbpages && cpu_has_gbpages)
+ printk(KERN_INFO "Using GB pages for direct mapping\n");
+ else
+ direct_gbpages = 0;
+}
+#else
+static inline void init_gbpages(void)
+{
+}
+#endif
+
static void __init reserve_brk(void)
{
if (_brk_end > _brk_start)
@@ -871,6 +885,8 @@
reserve_brk();
+ init_gbpages();
+
/* max_pfn_mapped is updated here */
max_low_pfn_mapped = init_memory_mapping(0, max_low_pfn<<PAGE_SHIFT);
max_pfn_mapped = max_low_pfn_mapped;
diff --git a/arch/x86/kernel/setup_percpu.c b/arch/x86/kernel/setup_percpu.c
index 9c3f082..29a3eef 100644
--- a/arch/x86/kernel/setup_percpu.c
+++ b/arch/x86/kernel/setup_percpu.c
@@ -124,7 +124,7 @@
}
/*
- * Remap allocator
+ * Large page remap allocator
*
* This allocator uses PMD page as unit. A PMD page is allocated for
* each cpu and each is remapped into vmalloc area using PMD mapping.
@@ -137,105 +137,185 @@
* better than only using 4k mappings while still being NUMA friendly.
*/
#ifdef CONFIG_NEED_MULTIPLE_NODES
-static size_t pcpur_size __initdata;
-static void **pcpur_ptrs __initdata;
+struct pcpul_ent {
+ unsigned int cpu;
+ void *ptr;
+};
-static struct page * __init pcpur_get_page(unsigned int cpu, int pageno)
+static size_t pcpul_size;
+static struct pcpul_ent *pcpul_map;
+static struct vm_struct pcpul_vm;
+
+static struct page * __init pcpul_get_page(unsigned int cpu, int pageno)
{
size_t off = (size_t)pageno << PAGE_SHIFT;
- if (off >= pcpur_size)
+ if (off >= pcpul_size)
return NULL;
- return virt_to_page(pcpur_ptrs[cpu] + off);
+ return virt_to_page(pcpul_map[cpu].ptr + off);
}
-static ssize_t __init setup_pcpu_remap(size_t static_size)
+static ssize_t __init setup_pcpu_lpage(size_t static_size, bool chosen)
{
- static struct vm_struct vm;
- size_t ptrs_size, dyn_size;
+ size_t map_size, dyn_size;
unsigned int cpu;
+ int i, j;
ssize_t ret;
- /*
- * If large page isn't supported, there's no benefit in doing
- * this. Also, on non-NUMA, embedding is better.
- *
- * NOTE: disabled for now.
- */
- if (true || !cpu_has_pse || !pcpu_need_numa())
+ if (!chosen) {
+ size_t vm_size = VMALLOC_END - VMALLOC_START;
+ size_t tot_size = num_possible_cpus() * PMD_SIZE;
+
+ /* on non-NUMA, embedding is better */
+ if (!pcpu_need_numa())
+ return -EINVAL;
+
+ /* don't consume more than 20% of vmalloc area */
+ if (tot_size > vm_size / 5) {
+ pr_info("PERCPU: too large chunk size %zuMB for "
+ "large page remap\n", tot_size >> 20);
+ return -EINVAL;
+ }
+ }
+
+ /* need PSE */
+ if (!cpu_has_pse) {
+ pr_warning("PERCPU: lpage allocator requires PSE\n");
return -EINVAL;
+ }
/*
* Currently supports only single page. Supporting multiple
* pages won't be too difficult if it ever becomes necessary.
*/
- pcpur_size = PFN_ALIGN(static_size + PERCPU_MODULE_RESERVE +
+ pcpul_size = PFN_ALIGN(static_size + PERCPU_MODULE_RESERVE +
PERCPU_DYNAMIC_RESERVE);
- if (pcpur_size > PMD_SIZE) {
+ if (pcpul_size > PMD_SIZE) {
pr_warning("PERCPU: static data is larger than large page, "
"can't use large page\n");
return -EINVAL;
}
- dyn_size = pcpur_size - static_size - PERCPU_FIRST_CHUNK_RESERVE;
+ dyn_size = pcpul_size - static_size - PERCPU_FIRST_CHUNK_RESERVE;
/* allocate pointer array and alloc large pages */
- ptrs_size = PFN_ALIGN(num_possible_cpus() * sizeof(pcpur_ptrs[0]));
- pcpur_ptrs = alloc_bootmem(ptrs_size);
+ map_size = PFN_ALIGN(num_possible_cpus() * sizeof(pcpul_map[0]));
+ pcpul_map = alloc_bootmem(map_size);
for_each_possible_cpu(cpu) {
- pcpur_ptrs[cpu] = pcpu_alloc_bootmem(cpu, PMD_SIZE, PMD_SIZE);
- if (!pcpur_ptrs[cpu])
+ pcpul_map[cpu].cpu = cpu;
+ pcpul_map[cpu].ptr = pcpu_alloc_bootmem(cpu, PMD_SIZE,
+ PMD_SIZE);
+ if (!pcpul_map[cpu].ptr) {
+ pr_warning("PERCPU: failed to allocate large page "
+ "for cpu%u\n", cpu);
goto enomem;
+ }
/*
- * Only use pcpur_size bytes and give back the rest.
+ * Only use pcpul_size bytes and give back the rest.
*
* Ingo: The 2MB up-rounding bootmem is needed to make
* sure the partial 2MB page is still fully RAM - it's
* not well-specified to have a PAT-incompatible area
* (unmapped RAM, device memory, etc.) in that hole.
*/
- free_bootmem(__pa(pcpur_ptrs[cpu] + pcpur_size),
- PMD_SIZE - pcpur_size);
+ free_bootmem(__pa(pcpul_map[cpu].ptr + pcpul_size),
+ PMD_SIZE - pcpul_size);
- memcpy(pcpur_ptrs[cpu], __per_cpu_load, static_size);
+ memcpy(pcpul_map[cpu].ptr, __per_cpu_load, static_size);
}
/* allocate address and map */
- vm.flags = VM_ALLOC;
- vm.size = num_possible_cpus() * PMD_SIZE;
- vm_area_register_early(&vm, PMD_SIZE);
+ pcpul_vm.flags = VM_ALLOC;
+ pcpul_vm.size = num_possible_cpus() * PMD_SIZE;
+ vm_area_register_early(&pcpul_vm, PMD_SIZE);
for_each_possible_cpu(cpu) {
- pmd_t *pmd;
+ pmd_t *pmd, pmd_v;
- pmd = populate_extra_pmd((unsigned long)vm.addr
- + cpu * PMD_SIZE);
- set_pmd(pmd, pfn_pmd(page_to_pfn(virt_to_page(pcpur_ptrs[cpu])),
- PAGE_KERNEL_LARGE));
+ pmd = populate_extra_pmd((unsigned long)pcpul_vm.addr +
+ cpu * PMD_SIZE);
+ pmd_v = pfn_pmd(page_to_pfn(virt_to_page(pcpul_map[cpu].ptr)),
+ PAGE_KERNEL_LARGE);
+ set_pmd(pmd, pmd_v);
}
/* we're ready, commit */
pr_info("PERCPU: Remapped at %p with large pages, static data "
- "%zu bytes\n", vm.addr, static_size);
+ "%zu bytes\n", pcpul_vm.addr, static_size);
- ret = pcpu_setup_first_chunk(pcpur_get_page, static_size,
+ ret = pcpu_setup_first_chunk(pcpul_get_page, static_size,
PERCPU_FIRST_CHUNK_RESERVE, dyn_size,
- PMD_SIZE, vm.addr, NULL);
- goto out_free_ar;
+ PMD_SIZE, pcpul_vm.addr, NULL);
+
+ /* sort pcpul_map array for pcpu_lpage_remapped() */
+ for (i = 0; i < num_possible_cpus() - 1; i++)
+ for (j = i + 1; j < num_possible_cpus(); j++)
+ if (pcpul_map[i].ptr > pcpul_map[j].ptr) {
+ struct pcpul_ent tmp = pcpul_map[i];
+ pcpul_map[i] = pcpul_map[j];
+ pcpul_map[j] = tmp;
+ }
+
+ return ret;
enomem:
for_each_possible_cpu(cpu)
- if (pcpur_ptrs[cpu])
- free_bootmem(__pa(pcpur_ptrs[cpu]), PMD_SIZE);
- ret = -ENOMEM;
-out_free_ar:
- free_bootmem(__pa(pcpur_ptrs), ptrs_size);
- return ret;
+ if (pcpul_map[cpu].ptr)
+ free_bootmem(__pa(pcpul_map[cpu].ptr), pcpul_size);
+ free_bootmem(__pa(pcpul_map), map_size);
+ return -ENOMEM;
+}
+
+/**
+ * pcpu_lpage_remapped - determine whether a kaddr is in pcpul recycled area
+ * @kaddr: the kernel address in question
+ *
+ * Determine whether @kaddr falls in the pcpul recycled area. This is
+ * used by pageattr to detect VM aliases and break up the pcpu PMD
+ * mapping such that the same physical page is not mapped under
+ * different attributes.
+ *
+ * The recycled area is always at the tail of a partially used PMD
+ * page.
+ *
+ * RETURNS:
+ * Address of corresponding remapped pcpu address if match is found;
+ * otherwise, NULL.
+ */
+void *pcpu_lpage_remapped(void *kaddr)
+{
+ void *pmd_addr = (void *)((unsigned long)kaddr & PMD_MASK);
+ unsigned long offset = (unsigned long)kaddr & ~PMD_MASK;
+ int left = 0, right = num_possible_cpus() - 1;
+ int pos;
+
+ /* pcpul in use at all? */
+ if (!pcpul_map)
+ return NULL;
+
+ /* okay, perform binary search */
+ while (left <= right) {
+ pos = (left + right) / 2;
+
+ if (pcpul_map[pos].ptr < pmd_addr)
+ left = pos + 1;
+ else if (pcpul_map[pos].ptr > pmd_addr)
+ right = pos - 1;
+ else {
+ /* it shouldn't be in the area for the first chunk */
+ WARN_ON(offset < pcpul_size);
+
+ return pcpul_vm.addr +
+ pcpul_map[pos].cpu * PMD_SIZE + offset;
+ }
+ }
+
+ return NULL;
}
#else
-static ssize_t __init setup_pcpu_remap(size_t static_size)
+static ssize_t __init setup_pcpu_lpage(size_t static_size, bool chosen)
{
return -EINVAL;
}
@@ -249,7 +329,7 @@
* mapping so that it can use PMD mapping without additional TLB
* pressure.
*/
-static ssize_t __init setup_pcpu_embed(size_t static_size)
+static ssize_t __init setup_pcpu_embed(size_t static_size, bool chosen)
{
size_t reserve = PERCPU_MODULE_RESERVE + PERCPU_DYNAMIC_RESERVE;
@@ -258,7 +338,7 @@
* this. Also, embedding allocation doesn't play well with
* NUMA.
*/
- if (!cpu_has_pse || pcpu_need_numa())
+ if (!chosen && (!cpu_has_pse || pcpu_need_numa()))
return -EINVAL;
return pcpu_embed_first_chunk(static_size, PERCPU_FIRST_CHUNK_RESERVE,
@@ -308,8 +388,11 @@
void *ptr;
ptr = pcpu_alloc_bootmem(cpu, PAGE_SIZE, PAGE_SIZE);
- if (!ptr)
+ if (!ptr) {
+ pr_warning("PERCPU: failed to allocate "
+ "4k page for cpu%u\n", cpu);
goto enomem;
+ }
memcpy(ptr, __per_cpu_load + i * PAGE_SIZE, PAGE_SIZE);
pcpu4k_pages[j++] = virt_to_page(ptr);
@@ -333,6 +416,16 @@
return ret;
}
+/* for explicit first chunk allocator selection */
+static char pcpu_chosen_alloc[16] __initdata;
+
+static int __init percpu_alloc_setup(char *str)
+{
+ strncpy(pcpu_chosen_alloc, str, sizeof(pcpu_chosen_alloc) - 1);
+ return 0;
+}
+early_param("percpu_alloc", percpu_alloc_setup);
+
static inline void setup_percpu_segment(int cpu)
{
#ifdef CONFIG_X86_32
@@ -346,11 +439,6 @@
#endif
}
-/*
- * Great future plan:
- * Declare PDA itself and support (irqstack,tss,pgd) as per cpu data.
- * Always point %gs to its beginning
- */
void __init setup_per_cpu_areas(void)
{
size_t static_size = __per_cpu_end - __per_cpu_start;
@@ -367,9 +455,26 @@
* of large page mappings. Please read comments on top of
* each allocator for details.
*/
- ret = setup_pcpu_remap(static_size);
- if (ret < 0)
- ret = setup_pcpu_embed(static_size);
+ ret = -EINVAL;
+ if (strlen(pcpu_chosen_alloc)) {
+ if (strcmp(pcpu_chosen_alloc, "4k")) {
+ if (!strcmp(pcpu_chosen_alloc, "lpage"))
+ ret = setup_pcpu_lpage(static_size, true);
+ else if (!strcmp(pcpu_chosen_alloc, "embed"))
+ ret = setup_pcpu_embed(static_size, true);
+ else
+ pr_warning("PERCPU: unknown allocator %s "
+ "specified\n", pcpu_chosen_alloc);
+ if (ret < 0)
+ pr_warning("PERCPU: %s allocator failed (%zd), "
+ "falling back to 4k\n",
+ pcpu_chosen_alloc, ret);
+ }
+ } else {
+ ret = setup_pcpu_lpage(static_size, false);
+ if (ret < 0)
+ ret = setup_pcpu_embed(static_size, false);
+ }
if (ret < 0)
ret = setup_pcpu_4k(static_size);
if (ret < 0)
diff --git a/arch/x86/kernel/tlb_uv.c b/arch/x86/kernel/tlb_uv.c
index 124d40c..8ccabb8 100644
--- a/arch/x86/kernel/tlb_uv.c
+++ b/arch/x86/kernel/tlb_uv.c
@@ -711,7 +711,6 @@
unsigned long pa;
unsigned long m;
unsigned long n;
- unsigned long mmr_image;
struct bau_desc *adp;
struct bau_desc *ad2;
@@ -727,12 +726,8 @@
n = pa >> uv_nshift;
m = pa & uv_mmask;
- mmr_image = uv_read_global_mmr64(pnode, UVH_LB_BAU_SB_DESCRIPTOR_BASE);
- if (mmr_image) {
- uv_write_global_mmr64(pnode, (unsigned long)
- UVH_LB_BAU_SB_DESCRIPTOR_BASE,
- (n << UV_DESC_BASE_PNODE_SHIFT | m));
- }
+ uv_write_global_mmr64(pnode, UVH_LB_BAU_SB_DESCRIPTOR_BASE,
+ (n << UV_DESC_BASE_PNODE_SHIFT | m));
/*
* initializing all 8 (UV_ITEMS_PER_DESCRIPTOR) descriptors for each
diff --git a/arch/x86/kernel/traps.c b/arch/x86/kernel/traps.c
index a0f48f5..5204332 100644
--- a/arch/x86/kernel/traps.c
+++ b/arch/x86/kernel/traps.c
@@ -346,6 +346,9 @@
printk(KERN_EMERG "NMI: IOCK error (debug interrupt?)\n");
show_registers(regs);
+ if (panic_on_io_nmi)
+ panic("NMI IOCK error: Not continuing");
+
/* Re-enable the IOCK line, wait for a few seconds */
reason = (reason & 0xf) | 8;
outb(reason, 0x61);
diff --git a/arch/x86/kvm/mmu.c b/arch/x86/kvm/mmu.c
index 5c3d6e8..7030b5f 100644
--- a/arch/x86/kvm/mmu.c
+++ b/arch/x86/kvm/mmu.c
@@ -2157,7 +2157,7 @@
else
/* 32 bits PSE 4MB page */
context->rsvd_bits_mask[1][1] = rsvd_bits(13, 21);
- context->rsvd_bits_mask[1][0] = ~0ull;
+ context->rsvd_bits_mask[1][0] = context->rsvd_bits_mask[1][0];
break;
case PT32E_ROOT_LEVEL:
context->rsvd_bits_mask[0][2] =
@@ -2170,7 +2170,7 @@
context->rsvd_bits_mask[1][1] = exb_bit_rsvd |
rsvd_bits(maxphyaddr, 62) |
rsvd_bits(13, 20); /* large page */
- context->rsvd_bits_mask[1][0] = ~0ull;
+ context->rsvd_bits_mask[1][0] = context->rsvd_bits_mask[1][0];
break;
case PT64_ROOT_LEVEL:
context->rsvd_bits_mask[0][3] = exb_bit_rsvd |
@@ -2186,7 +2186,7 @@
context->rsvd_bits_mask[1][1] = exb_bit_rsvd |
rsvd_bits(maxphyaddr, 51) |
rsvd_bits(13, 20); /* large page */
- context->rsvd_bits_mask[1][0] = ~0ull;
+ context->rsvd_bits_mask[1][0] = context->rsvd_bits_mask[1][0];
break;
}
}
diff --git a/arch/x86/kvm/paging_tmpl.h b/arch/x86/kvm/paging_tmpl.h
index 258e459..67785f6 100644
--- a/arch/x86/kvm/paging_tmpl.h
+++ b/arch/x86/kvm/paging_tmpl.h
@@ -281,7 +281,7 @@
{
unsigned access = gw->pt_access;
struct kvm_mmu_page *shadow_page;
- u64 spte, *sptep;
+ u64 spte, *sptep = NULL;
int direct;
gfn_t table_gfn;
int r;
diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c
index e770bf3..356a0ce 100644
--- a/arch/x86/kvm/vmx.c
+++ b/arch/x86/kvm/vmx.c
@@ -3012,6 +3012,12 @@
return 1;
}
+static int handle_vmx_insn(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
+{
+ kvm_queue_exception(vcpu, UD_VECTOR);
+ return 1;
+}
+
static int handle_invlpg(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
{
unsigned long exit_qualification = vmcs_readl(EXIT_QUALIFICATION);
@@ -3198,6 +3204,15 @@
[EXIT_REASON_HLT] = handle_halt,
[EXIT_REASON_INVLPG] = handle_invlpg,
[EXIT_REASON_VMCALL] = handle_vmcall,
+ [EXIT_REASON_VMCLEAR] = handle_vmx_insn,
+ [EXIT_REASON_VMLAUNCH] = handle_vmx_insn,
+ [EXIT_REASON_VMPTRLD] = handle_vmx_insn,
+ [EXIT_REASON_VMPTRST] = handle_vmx_insn,
+ [EXIT_REASON_VMREAD] = handle_vmx_insn,
+ [EXIT_REASON_VMRESUME] = handle_vmx_insn,
+ [EXIT_REASON_VMWRITE] = handle_vmx_insn,
+ [EXIT_REASON_VMOFF] = handle_vmx_insn,
+ [EXIT_REASON_VMON] = handle_vmx_insn,
[EXIT_REASON_TPR_BELOW_THRESHOLD] = handle_tpr_below_threshold,
[EXIT_REASON_APIC_ACCESS] = handle_apic_access,
[EXIT_REASON_WBINVD] = handle_wbinvd,
diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index 249540f..fe5474a 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -898,6 +898,7 @@
case MSR_VM_HSAVE_PA:
case MSR_P6_EVNTSEL0:
case MSR_P6_EVNTSEL1:
+ case MSR_K7_EVNTSEL0:
data = 0;
break;
case MSR_MTRRcap:
diff --git a/arch/x86/kvm/x86_emulate.c b/arch/x86/kvm/x86_emulate.c
index c1b6c23..616de46 100644
--- a/arch/x86/kvm/x86_emulate.c
+++ b/arch/x86/kvm/x86_emulate.c
@@ -1361,7 +1361,7 @@
return 0;
}
-void toggle_interruptibility(struct x86_emulate_ctxt *ctxt, u32 mask)
+static void toggle_interruptibility(struct x86_emulate_ctxt *ctxt, u32 mask)
{
u32 int_shadow = kvm_x86_ops->get_interrupt_shadow(ctxt->vcpu, mask);
/*
diff --git a/arch/x86/lib/Makefile b/arch/x86/lib/Makefile
index f9d3563..07c3189 100644
--- a/arch/x86/lib/Makefile
+++ b/arch/x86/lib/Makefile
@@ -10,6 +10,7 @@
lib-y += memcpy_$(BITS).o
ifeq ($(CONFIG_X86_32),y)
+ obj-y += atomic64_32.o
lib-y += checksum_32.o
lib-y += strstr_32.o
lib-y += semaphore_32.o string_32.o
diff --git a/arch/x86/lib/atomic64_32.c b/arch/x86/lib/atomic64_32.c
new file mode 100644
index 0000000..824fa0b
--- /dev/null
+++ b/arch/x86/lib/atomic64_32.c
@@ -0,0 +1,230 @@
+#include <linux/compiler.h>
+#include <linux/module.h>
+#include <linux/types.h>
+
+#include <asm/processor.h>
+#include <asm/cmpxchg.h>
+#include <asm/atomic.h>
+
+static noinline u64 cmpxchg8b(u64 *ptr, u64 old, u64 new)
+{
+ u32 low = new;
+ u32 high = new >> 32;
+
+ asm volatile(
+ LOCK_PREFIX "cmpxchg8b %1\n"
+ : "+A" (old), "+m" (*ptr)
+ : "b" (low), "c" (high)
+ );
+ return old;
+}
+
+u64 atomic64_cmpxchg(atomic64_t *ptr, u64 old_val, u64 new_val)
+{
+ return cmpxchg8b(&ptr->counter, old_val, new_val);
+}
+EXPORT_SYMBOL(atomic64_cmpxchg);
+
+/**
+ * atomic64_xchg - xchg atomic64 variable
+ * @ptr: pointer to type atomic64_t
+ * @new_val: value to assign
+ *
+ * Atomically xchgs the value of @ptr to @new_val and returns
+ * the old value.
+ */
+u64 atomic64_xchg(atomic64_t *ptr, u64 new_val)
+{
+ /*
+ * Try first with a (possibly incorrect) assumption about
+ * what we have there. We'll do two loops most likely,
+ * but we'll get an ownership MESI transaction straight away
+ * instead of a read transaction followed by a
+ * flush-for-ownership transaction:
+ */
+ u64 old_val, real_val = 0;
+
+ do {
+ old_val = real_val;
+
+ real_val = atomic64_cmpxchg(ptr, old_val, new_val);
+
+ } while (real_val != old_val);
+
+ return old_val;
+}
+EXPORT_SYMBOL(atomic64_xchg);
+
+/**
+ * atomic64_set - set atomic64 variable
+ * @ptr: pointer to type atomic64_t
+ * @new_val: value to assign
+ *
+ * Atomically sets the value of @ptr to @new_val.
+ */
+void atomic64_set(atomic64_t *ptr, u64 new_val)
+{
+ atomic64_xchg(ptr, new_val);
+}
+EXPORT_SYMBOL(atomic64_set);
+
+/**
+EXPORT_SYMBOL(atomic64_read);
+ * atomic64_add_return - add and return
+ * @delta: integer value to add
+ * @ptr: pointer to type atomic64_t
+ *
+ * Atomically adds @delta to @ptr and returns @delta + *@ptr
+ */
+noinline u64 atomic64_add_return(u64 delta, atomic64_t *ptr)
+{
+ /*
+ * Try first with a (possibly incorrect) assumption about
+ * what we have there. We'll do two loops most likely,
+ * but we'll get an ownership MESI transaction straight away
+ * instead of a read transaction followed by a
+ * flush-for-ownership transaction:
+ */
+ u64 old_val, new_val, real_val = 0;
+
+ do {
+ old_val = real_val;
+ new_val = old_val + delta;
+
+ real_val = atomic64_cmpxchg(ptr, old_val, new_val);
+
+ } while (real_val != old_val);
+
+ return new_val;
+}
+EXPORT_SYMBOL(atomic64_add_return);
+
+u64 atomic64_sub_return(u64 delta, atomic64_t *ptr)
+{
+ return atomic64_add_return(-delta, ptr);
+}
+EXPORT_SYMBOL(atomic64_sub_return);
+
+u64 atomic64_inc_return(atomic64_t *ptr)
+{
+ return atomic64_add_return(1, ptr);
+}
+EXPORT_SYMBOL(atomic64_inc_return);
+
+u64 atomic64_dec_return(atomic64_t *ptr)
+{
+ return atomic64_sub_return(1, ptr);
+}
+EXPORT_SYMBOL(atomic64_dec_return);
+
+/**
+ * atomic64_add - add integer to atomic64 variable
+ * @delta: integer value to add
+ * @ptr: pointer to type atomic64_t
+ *
+ * Atomically adds @delta to @ptr.
+ */
+void atomic64_add(u64 delta, atomic64_t *ptr)
+{
+ atomic64_add_return(delta, ptr);
+}
+EXPORT_SYMBOL(atomic64_add);
+
+/**
+ * atomic64_sub - subtract the atomic64 variable
+ * @delta: integer value to subtract
+ * @ptr: pointer to type atomic64_t
+ *
+ * Atomically subtracts @delta from @ptr.
+ */
+void atomic64_sub(u64 delta, atomic64_t *ptr)
+{
+ atomic64_add(-delta, ptr);
+}
+EXPORT_SYMBOL(atomic64_sub);
+
+/**
+ * atomic64_sub_and_test - subtract value from variable and test result
+ * @delta: integer value to subtract
+ * @ptr: pointer to type atomic64_t
+ *
+ * Atomically subtracts @delta from @ptr and returns
+ * true if the result is zero, or false for all
+ * other cases.
+ */
+int atomic64_sub_and_test(u64 delta, atomic64_t *ptr)
+{
+ u64 new_val = atomic64_sub_return(delta, ptr);
+
+ return new_val == 0;
+}
+EXPORT_SYMBOL(atomic64_sub_and_test);
+
+/**
+ * atomic64_inc - increment atomic64 variable
+ * @ptr: pointer to type atomic64_t
+ *
+ * Atomically increments @ptr by 1.
+ */
+void atomic64_inc(atomic64_t *ptr)
+{
+ atomic64_add(1, ptr);
+}
+EXPORT_SYMBOL(atomic64_inc);
+
+/**
+ * atomic64_dec - decrement atomic64 variable
+ * @ptr: pointer to type atomic64_t
+ *
+ * Atomically decrements @ptr by 1.
+ */
+void atomic64_dec(atomic64_t *ptr)
+{
+ atomic64_sub(1, ptr);
+}
+EXPORT_SYMBOL(atomic64_dec);
+
+/**
+ * atomic64_dec_and_test - decrement and test
+ * @ptr: pointer to type atomic64_t
+ *
+ * Atomically decrements @ptr by 1 and
+ * returns true if the result is 0, or false for all other
+ * cases.
+ */
+int atomic64_dec_and_test(atomic64_t *ptr)
+{
+ return atomic64_sub_and_test(1, ptr);
+}
+EXPORT_SYMBOL(atomic64_dec_and_test);
+
+/**
+ * atomic64_inc_and_test - increment and test
+ * @ptr: pointer to type atomic64_t
+ *
+ * Atomically increments @ptr by 1
+ * and returns true if the result is zero, or false for all
+ * other cases.
+ */
+int atomic64_inc_and_test(atomic64_t *ptr)
+{
+ return atomic64_sub_and_test(-1, ptr);
+}
+EXPORT_SYMBOL(atomic64_inc_and_test);
+
+/**
+ * atomic64_add_negative - add and test if negative
+ * @delta: integer value to add
+ * @ptr: pointer to type atomic64_t
+ *
+ * Atomically adds @delta to @ptr and returns true
+ * if the result is negative, or false when
+ * result is greater than or equal to zero.
+ */
+int atomic64_add_negative(u64 delta, atomic64_t *ptr)
+{
+ s64 new_val = atomic64_add_return(delta, ptr);
+
+ return new_val < 0;
+}
+EXPORT_SYMBOL(atomic64_add_negative);
diff --git a/arch/x86/lib/clear_page_64.S b/arch/x86/lib/clear_page_64.S
index 9a10a78..ebeafcc 100644
--- a/arch/x86/lib/clear_page_64.S
+++ b/arch/x86/lib/clear_page_64.S
@@ -5,15 +5,14 @@
* Zero a page.
* rdi page
*/
- ALIGN
-clear_page_c:
+ENTRY(clear_page_c)
CFI_STARTPROC
movl $4096/8,%ecx
xorl %eax,%eax
rep stosq
ret
CFI_ENDPROC
-ENDPROC(clear_page)
+ENDPROC(clear_page_c)
ENTRY(clear_page)
CFI_STARTPROC
diff --git a/arch/x86/lib/copy_user_64.S b/arch/x86/lib/copy_user_64.S
index f118c11..6ba0f7b 100644
--- a/arch/x86/lib/copy_user_64.S
+++ b/arch/x86/lib/copy_user_64.S
@@ -75,6 +75,7 @@
jae bad_to_user
ALTERNATIVE_JUMP X86_FEATURE_REP_GOOD,copy_user_generic_unrolled,copy_user_generic_string
CFI_ENDPROC
+ENDPROC(copy_to_user)
/* Standard copy_from_user with segment limit checking */
ENTRY(copy_from_user)
diff --git a/arch/x86/lib/delay.c b/arch/x86/lib/delay.c
index f456860..ff485d3 100644
--- a/arch/x86/lib/delay.c
+++ b/arch/x86/lib/delay.c
@@ -55,8 +55,10 @@
preempt_disable();
cpu = smp_processor_id();
+ rdtsc_barrier();
rdtscl(bclock);
for (;;) {
+ rdtsc_barrier();
rdtscl(now);
if ((now - bclock) >= loops)
break;
@@ -78,6 +80,7 @@
if (unlikely(cpu != smp_processor_id())) {
loops -= (now - bclock);
cpu = smp_processor_id();
+ rdtsc_barrier();
rdtscl(bclock);
}
}
diff --git a/arch/x86/lib/usercopy_32.c b/arch/x86/lib/usercopy_32.c
index 7c8ca91..1f118d4 100644
--- a/arch/x86/lib/usercopy_32.c
+++ b/arch/x86/lib/usercopy_32.c
@@ -751,7 +751,7 @@
if (retval == -ENOMEM && is_global_init(current)) {
up_read(¤t->mm->mmap_sem);
- congestion_wait(WRITE, HZ/50);
+ congestion_wait(BLK_RW_ASYNC, HZ/50);
goto survive;
}
diff --git a/arch/x86/mm/fault.c b/arch/x86/mm/fault.c
index 78a5fff..85307cc 100644
--- a/arch/x86/mm/fault.c
+++ b/arch/x86/mm/fault.c
@@ -426,10 +426,11 @@
}
static const char errata93_warning[] =
-KERN_ERR "******* Your BIOS seems to not contain a fix for K8 errata #93\n"
-KERN_ERR "******* Working around it, but it may cause SEGVs or burn power.\n"
-KERN_ERR "******* Please consider a BIOS update.\n"
-KERN_ERR "******* Disabling USB legacy in the BIOS may also help.\n";
+KERN_ERR
+"******* Your BIOS seems to not contain a fix for K8 errata #93\n"
+"******* Working around it, but it may cause SEGVs or burn power.\n"
+"******* Please consider a BIOS update.\n"
+"******* Disabling USB legacy in the BIOS may also help.\n";
/*
* No vm86 mode in 64-bit mode:
diff --git a/arch/x86/mm/init.c b/arch/x86/mm/init.c
index f53b57e..0607119 100644
--- a/arch/x86/mm/init.c
+++ b/arch/x86/mm/init.c
@@ -12,6 +12,7 @@
#include <asm/system.h>
#include <asm/tlbflush.h>
#include <asm/tlb.h>
+#include <asm/proto.h>
DEFINE_PER_CPU(struct mmu_gather, mmu_gathers);
@@ -177,20 +178,6 @@
return nr_range;
}
-#ifdef CONFIG_X86_64
-static void __init init_gbpages(void)
-{
- if (direct_gbpages && cpu_has_gbpages)
- printk(KERN_INFO "Using GB pages for direct mapping\n");
- else
- direct_gbpages = 0;
-}
-#else
-static inline void init_gbpages(void)
-{
-}
-#endif
-
/*
* Setup the direct mapping of the physical memory at PAGE_OFFSET.
* This runs before bootmem is initialized and gets pages directly from
@@ -210,9 +197,6 @@
printk(KERN_INFO "init_memory_mapping: %016lx-%016lx\n", start, end);
- if (!after_bootmem)
- init_gbpages();
-
#if defined(CONFIG_DEBUG_PAGEALLOC) || defined(CONFIG_KMEMCHECK)
/*
* For CONFIG_DEBUG_PAGEALLOC, identity mapping will use small pages.
diff --git a/arch/x86/mm/init_64.c b/arch/x86/mm/init_64.c
index c4378f4..6176fe8 100644
--- a/arch/x86/mm/init_64.c
+++ b/arch/x86/mm/init_64.c
@@ -598,6 +598,15 @@
sparse_memory_present_with_active_regions(MAX_NUMNODES);
sparse_init();
+
+ /*
+ * clear the default setting with node 0
+ * note: don't use nodes_clear here, that is really clearing when
+ * numa support is not compiled in, and later node_set_state
+ * will not set it back.
+ */
+ node_clear_state(0, N_NORMAL_MEMORY);
+
free_area_init_nodes(max_zone_pfns);
}
diff --git a/arch/x86/mm/pageattr.c b/arch/x86/mm/pageattr.c
index 3cfe9ce..1b734d7 100644
--- a/arch/x86/mm/pageattr.c
+++ b/arch/x86/mm/pageattr.c
@@ -11,6 +11,7 @@
#include <linux/interrupt.h>
#include <linux/seq_file.h>
#include <linux/debugfs.h>
+#include <linux/pfn.h>
#include <asm/e820.h>
#include <asm/processor.h>
@@ -681,8 +682,9 @@
static int cpa_process_alias(struct cpa_data *cpa)
{
struct cpa_data alias_cpa;
- int ret = 0;
- unsigned long temp_cpa_vaddr, vaddr;
+ unsigned long laddr = (unsigned long)__va(cpa->pfn << PAGE_SHIFT);
+ unsigned long vaddr, remapped;
+ int ret;
if (cpa->pfn >= max_pfn_mapped)
return 0;
@@ -706,42 +708,55 @@
PAGE_OFFSET + (max_pfn_mapped << PAGE_SHIFT)))) {
alias_cpa = *cpa;
- temp_cpa_vaddr = (unsigned long) __va(cpa->pfn << PAGE_SHIFT);
- alias_cpa.vaddr = &temp_cpa_vaddr;
+ alias_cpa.vaddr = &laddr;
alias_cpa.flags &= ~(CPA_PAGES_ARRAY | CPA_ARRAY);
-
ret = __change_page_attr_set_clr(&alias_cpa, 0);
+ if (ret)
+ return ret;
}
#ifdef CONFIG_X86_64
- if (ret)
- return ret;
/*
- * No need to redo, when the primary call touched the high
- * mapping already:
- */
- if (within(vaddr, (unsigned long) _text, _brk_end))
- return 0;
-
- /*
- * If the physical address is inside the kernel map, we need
+ * If the primary call didn't touch the high mapping already
+ * and the physical address is inside the kernel map, we need
* to touch the high mapped kernel as well:
*/
- if (!within(cpa->pfn, highmap_start_pfn(), highmap_end_pfn()))
- return 0;
+ if (!within(vaddr, (unsigned long)_text, _brk_end) &&
+ within(cpa->pfn, highmap_start_pfn(), highmap_end_pfn())) {
+ unsigned long temp_cpa_vaddr = (cpa->pfn << PAGE_SHIFT) +
+ __START_KERNEL_map - phys_base;
+ alias_cpa = *cpa;
+ alias_cpa.vaddr = &temp_cpa_vaddr;
+ alias_cpa.flags &= ~(CPA_PAGES_ARRAY | CPA_ARRAY);
- alias_cpa = *cpa;
- temp_cpa_vaddr = (cpa->pfn << PAGE_SHIFT) + __START_KERNEL_map - phys_base;
- alias_cpa.vaddr = &temp_cpa_vaddr;
- alias_cpa.flags &= ~(CPA_PAGES_ARRAY | CPA_ARRAY);
+ /*
+ * The high mapping range is imprecise, so ignore the
+ * return value.
+ */
+ __change_page_attr_set_clr(&alias_cpa, 0);
+ }
+#endif
/*
- * The high mapping range is imprecise, so ignore the return value.
+ * If the PMD page was partially used for per-cpu remapping,
+ * the recycled area needs to be split and modified. Because
+ * the area is always proper subset of a PMD page
+ * cpa->numpages is guaranteed to be 1 for these areas, so
+ * there's no need to loop over and check for further remaps.
*/
- __change_page_attr_set_clr(&alias_cpa, 0);
-#endif
- return ret;
+ remapped = (unsigned long)pcpu_lpage_remapped((void *)laddr);
+ if (remapped) {
+ WARN_ON(cpa->numpages > 1);
+ alias_cpa = *cpa;
+ alias_cpa.vaddr = &remapped;
+ alias_cpa.flags &= ~(CPA_PAGES_ARRAY | CPA_ARRAY);
+ ret = __change_page_attr_set_clr(&alias_cpa, 0);
+ if (ret)
+ return ret;
+ }
+
+ return 0;
}
static int __change_page_attr_set_clr(struct cpa_data *cpa, int checkalias)
diff --git a/arch/x86/oprofile/nmi_int.c b/arch/x86/oprofile/nmi_int.c
index b07dd8d..89b9a5c 100644
--- a/arch/x86/oprofile/nmi_int.c
+++ b/arch/x86/oprofile/nmi_int.c
@@ -390,7 +390,7 @@
static int force_arch_perfmon;
static int force_cpu_type(const char *str, struct kernel_param *kp)
{
- if (!strcmp(str, "archperfmon")) {
+ if (!strcmp(str, "arch_perfmon")) {
force_arch_perfmon = 1;
printk(KERN_INFO "oprofile: forcing architectural perfmon\n");
}
diff --git a/arch/x86/pci/acpi.c b/arch/x86/pci/acpi.c
index b26626d..1014eb4 100644
--- a/arch/x86/pci/acpi.c
+++ b/arch/x86/pci/acpi.c
@@ -68,6 +68,10 @@
unsigned long flags;
struct resource *root;
int max_root_bus_resources = PCI_BUS_NUM_RESOURCES;
+ u64 start, end;
+
+ if (bus_has_transparent_bridge(info->bus))
+ max_root_bus_resources -= 3;
status = resource_to_addr(acpi_res, &addr);
if (!ACPI_SUCCESS(status))
@@ -84,25 +88,24 @@
} else
return AE_OK;
- res = &info->res[info->res_num];
- res->name = info->name;
- res->flags = flags;
- res->start = addr.minimum + addr.translation_offset;
- res->end = res->start + addr.address_length - 1;
- res->child = NULL;
-
- if (bus_has_transparent_bridge(info->bus))
- max_root_bus_resources -= 3;
+ start = addr.minimum + addr.translation_offset;
+ end = start + addr.address_length - 1;
if (info->res_num >= max_root_bus_resources) {
printk(KERN_WARNING "PCI: Failed to allocate 0x%lx-0x%lx "
"from %s for %s due to _CRS returning more than "
- "%d resource descriptors\n", (unsigned long) res->start,
- (unsigned long) res->end, root->name, info->name,
+ "%d resource descriptors\n", (unsigned long) start,
+ (unsigned long) end, root->name, info->name,
max_root_bus_resources);
- info->res_num++;
return AE_OK;
}
+ res = &info->res[info->res_num];
+ res->name = info->name;
+ res->flags = flags;
+ res->start = start;
+ res->end = end;
+ res->child = NULL;
+
if (insert_resource(root, res)) {
printk(KERN_ERR "PCI: Failed to allocate 0x%lx-0x%lx "
"from %s for %s\n", (unsigned long) res->start,
@@ -115,23 +118,6 @@
}
static void
-adjust_transparent_bridge_resources(struct pci_bus *bus)
-{
- struct pci_dev *dev;
-
- list_for_each_entry(dev, &bus->devices, bus_list) {
- int i;
- u16 class = dev->class >> 8;
-
- if (class == PCI_CLASS_BRIDGE_PCI && dev->transparent) {
- for(i = 3; i < PCI_BUS_NUM_RESOURCES; i++)
- dev->subordinate->resource[i] =
- dev->bus->resource[i - 3];
- }
- }
-}
-
-static void
get_current_resources(struct acpi_device *device, int busnum,
int domain, struct pci_bus *bus)
{
@@ -158,8 +144,6 @@
info.res_num = 0;
acpi_walk_resources(device->handle, METHOD_NAME__CRS, setup_resource,
&info);
- if (info.res_num)
- adjust_transparent_bridge_resources(bus);
return;
@@ -222,8 +206,15 @@
*/
memcpy(bus->sysdata, sd, sizeof(*sd));
kfree(sd);
- } else
- bus = pci_scan_bus_parented(NULL, busnum, &pci_root_ops, sd);
+ } else {
+ bus = pci_create_bus(NULL, busnum, &pci_root_ops, sd);
+ if (bus) {
+ if (pci_probe & PCI_USE__CRS)
+ get_current_resources(device, busnum, domain,
+ bus);
+ bus->subordinate = pci_scan_child_bus(bus);
+ }
+ }
if (!bus)
kfree(sd);
@@ -238,8 +229,6 @@
#endif
}
- if (bus && (pci_probe & PCI_USE__CRS))
- get_current_resources(device, busnum, domain, bus);
return bus;
}
diff --git a/arch/x86/pci/amd_bus.c b/arch/x86/pci/amd_bus.c
index f893d6a..3ffa10d 100644
--- a/arch/x86/pci/amd_bus.c
+++ b/arch/x86/pci/amd_bus.c
@@ -100,8 +100,9 @@
int j;
struct pci_root_info *info;
- /* don't go for it if _CRS is used */
- if (pci_probe & PCI_USE__CRS)
+ /* don't go for it if _CRS is used already */
+ if (b->resource[0] != &ioport_resource ||
+ b->resource[1] != &iomem_resource)
return;
/* if only one root bus, don't need to anything */
@@ -116,6 +117,9 @@
if (i == pci_root_num)
return;
+ printk(KERN_DEBUG "PCI: peer root bus %02x res updated from pci conf\n",
+ b->number);
+
info = &pci_root_info[i];
for (j = 0; j < info->res_num; j++) {
struct resource *res;
diff --git a/arch/x86/power/Makefile b/arch/x86/power/Makefile
index de2abbd..a6a198c 100644
--- a/arch/x86/power/Makefile
+++ b/arch/x86/power/Makefile
@@ -1,7 +1,7 @@
# __restore_processor_state() restores %gs after S3 resume and so should not
# itself be stack-protected
nostackp := $(call cc-option, -fno-stack-protector)
-CFLAGS_cpu_$(BITS).o := $(nostackp)
+CFLAGS_cpu.o := $(nostackp)
obj-$(CONFIG_PM_SLEEP) += cpu.o
obj-$(CONFIG_HIBERNATION) += hibernate_$(BITS).o hibernate_asm_$(BITS).o
diff --git a/arch/x86/power/cpu.c b/arch/x86/power/cpu.c
index d277ef1..b3d20b9 100644
--- a/arch/x86/power/cpu.c
+++ b/arch/x86/power/cpu.c
@@ -244,7 +244,7 @@
do_fpu_end();
mtrr_ap_init();
-#ifdef CONFIG_X86_32
+#ifdef CONFIG_X86_OLD_MCE
mcheck_init(&boot_cpu_data);
#endif
}
diff --git a/arch/xtensa/include/asm/thread_info.h b/arch/xtensa/include/asm/thread_info.h
index 0f4fe1f..1316564 100644
--- a/arch/xtensa/include/asm/thread_info.h
+++ b/arch/xtensa/include/asm/thread_info.h
@@ -80,8 +80,6 @@
/*
* macros/functions for gaining access to the thread information structure
- *
- * preempt_count needs to be 1 initially, until the scheduler is functional.
*/
#ifndef __ASSEMBLY__
@@ -92,7 +90,7 @@
.exec_domain = &default_exec_domain, \
.flags = 0, \
.cpu = 0, \
- .preempt_count = 1, \
+ .preempt_count = INIT_PREEMPT_COUNT, \
.addr_limit = KERNEL_DS, \
.restart_block = { \
.fn = do_no_restart_syscall, \
diff --git a/arch/xtensa/kernel/traps.c b/arch/xtensa/kernel/traps.c
index ba9ab93..e64efac 100644
--- a/arch/xtensa/kernel/traps.c
+++ b/arch/xtensa/kernel/traps.c
@@ -354,10 +354,10 @@
for (i = 0; i < 16; i++) {
if ((i % 8) == 0)
- printk ("\n" KERN_INFO "a%02d: ", i);
- printk("%08lx ", regs->areg[i]);
+ printk(KERN_INFO "a%02d:", i);
+ printk(KERN_CONT " %08lx", regs->areg[i]);
}
- printk("\n");
+ printk(KERN_CONT "\n");
printk("pc: %08lx, ps: %08lx, depc: %08lx, excvaddr: %08lx\n",
regs->pc, regs->ps, regs->depc, regs->excvaddr);
diff --git a/block/Makefile b/block/Makefile
index e9fa4dd..6c54ed0 100644
--- a/block/Makefile
+++ b/block/Makefile
@@ -5,7 +5,7 @@
obj-$(CONFIG_BLOCK) := elevator.o blk-core.o blk-tag.o blk-sysfs.o \
blk-barrier.o blk-settings.o blk-ioc.o blk-map.o \
blk-exec.o blk-merge.o blk-softirq.o blk-timeout.o \
- ioctl.o genhd.o scsi_ioctl.o cmd-filter.o
+ ioctl.o genhd.o scsi_ioctl.o
obj-$(CONFIG_BLK_DEV_BSG) += bsg.o
obj-$(CONFIG_IOSCHED_NOOP) += noop-iosched.o
diff --git a/block/blk-core.c b/block/blk-core.c
index b06cf5c..4b45435 100644
--- a/block/blk-core.c
+++ b/block/blk-core.c
@@ -595,8 +595,6 @@
q->sg_reserved_size = INT_MAX;
- blk_set_cmd_filter_defaults(&q->cmd_filter);
-
/*
* all done
*/
@@ -1172,6 +1170,11 @@
const int unplug = bio_unplug(bio);
int rw_flags;
+ if (bio_barrier(bio) && bio_has_data(bio) &&
+ (q->next_ordered == QUEUE_ORDERED_NONE)) {
+ bio_endio(bio, -EOPNOTSUPP);
+ return 0;
+ }
/*
* low level driver can indicate that it wants pages above a
* certain limit bounced to low memory (ie for highmem, or even
@@ -1472,11 +1475,6 @@
err = -EOPNOTSUPP;
goto end_io;
}
- if (bio_barrier(bio) && bio_has_data(bio) &&
- (q->next_ordered == QUEUE_ORDERED_NONE)) {
- err = -EOPNOTSUPP;
- goto end_io;
- }
ret = q->make_request_fn(q, bio);
} while (ret);
@@ -2365,7 +2363,7 @@
__bio_clone(bio, bio_src);
if (bio_integrity(bio_src) &&
- bio_integrity_clone(bio, bio_src, gfp_mask))
+ bio_integrity_clone(bio, bio_src, gfp_mask, bs))
goto free_and_out;
if (bio_ctr && bio_ctr(bio, bio_src, data))
diff --git a/block/blk-merge.c b/block/blk-merge.c
index 39ce644..e199967 100644
--- a/block/blk-merge.c
+++ b/block/blk-merge.c
@@ -350,6 +350,12 @@
if (blk_integrity_rq(req) != blk_integrity_rq(next))
return 0;
+ /* don't merge requests of different failfast settings */
+ if (blk_failfast_dev(req) != blk_failfast_dev(next) ||
+ blk_failfast_transport(req) != blk_failfast_transport(next) ||
+ blk_failfast_driver(req) != blk_failfast_driver(next))
+ return 0;
+
/*
* If we are allowed to merge, then append bio list
* from next to rq and release next. merge_requests_fn
diff --git a/block/bsg.c b/block/bsg.c
index e7d4752..5f184bb 100644
--- a/block/bsg.c
+++ b/block/bsg.c
@@ -186,7 +186,7 @@
return -EFAULT;
if (hdr->subprotocol == BSG_SUB_PROTOCOL_SCSI_CMD) {
- if (blk_verify_command(&q->cmd_filter, rq->cmd, has_write_perm))
+ if (blk_verify_command(rq->cmd, has_write_perm))
return -EPERM;
} else if (!capable(CAP_SYS_RAWIO))
return -EPERM;
diff --git a/block/cfq-iosched.c b/block/cfq-iosched.c
index 833ec18..fd7080e 100644
--- a/block/cfq-iosched.c
+++ b/block/cfq-iosched.c
@@ -71,6 +71,51 @@
#define CFQ_RB_ROOT (struct cfq_rb_root) { RB_ROOT, NULL, }
/*
+ * Per process-grouping structure
+ */
+struct cfq_queue {
+ /* reference count */
+ atomic_t ref;
+ /* various state flags, see below */
+ unsigned int flags;
+ /* parent cfq_data */
+ struct cfq_data *cfqd;
+ /* service_tree member */
+ struct rb_node rb_node;
+ /* service_tree key */
+ unsigned long rb_key;
+ /* prio tree member */
+ struct rb_node p_node;
+ /* prio tree root we belong to, if any */
+ struct rb_root *p_root;
+ /* sorted list of pending requests */
+ struct rb_root sort_list;
+ /* if fifo isn't expired, next request to serve */
+ struct request *next_rq;
+ /* requests queued in sort_list */
+ int queued[2];
+ /* currently allocated requests */
+ int allocated[2];
+ /* fifo list of requests in sort_list */
+ struct list_head fifo;
+
+ unsigned long slice_end;
+ long slice_resid;
+ unsigned int slice_dispatch;
+
+ /* pending metadata requests */
+ int meta_pending;
+ /* number of requests that are on the dispatch list or inside driver */
+ int dispatched;
+
+ /* io prio of this group */
+ unsigned short ioprio, org_ioprio;
+ unsigned short ioprio_class, org_ioprio_class;
+
+ pid_t pid;
+};
+
+/*
* Per block device queue structure
*/
struct cfq_data {
@@ -135,51 +180,11 @@
unsigned int cfq_slice_idle;
struct list_head cic_list;
-};
-/*
- * Per process-grouping structure
- */
-struct cfq_queue {
- /* reference count */
- atomic_t ref;
- /* various state flags, see below */
- unsigned int flags;
- /* parent cfq_data */
- struct cfq_data *cfqd;
- /* service_tree member */
- struct rb_node rb_node;
- /* service_tree key */
- unsigned long rb_key;
- /* prio tree member */
- struct rb_node p_node;
- /* prio tree root we belong to, if any */
- struct rb_root *p_root;
- /* sorted list of pending requests */
- struct rb_root sort_list;
- /* if fifo isn't expired, next request to serve */
- struct request *next_rq;
- /* requests queued in sort_list */
- int queued[2];
- /* currently allocated requests */
- int allocated[2];
- /* fifo list of requests in sort_list */
- struct list_head fifo;
-
- unsigned long slice_end;
- long slice_resid;
- unsigned int slice_dispatch;
-
- /* pending metadata requests */
- int meta_pending;
- /* number of requests that are on the dispatch list or inside driver */
- int dispatched;
-
- /* io prio of this group */
- unsigned short ioprio, org_ioprio;
- unsigned short ioprio_class, org_ioprio_class;
-
- pid_t pid;
+ /*
+ * Fallback dummy cfqq for extreme OOM conditions
+ */
+ struct cfq_queue oom_cfqq;
};
enum cfqq_state_flags {
@@ -1641,6 +1646,26 @@
ioc->ioprio_changed = 0;
}
+static void cfq_init_cfqq(struct cfq_data *cfqd, struct cfq_queue *cfqq,
+ pid_t pid, int is_sync)
+{
+ RB_CLEAR_NODE(&cfqq->rb_node);
+ RB_CLEAR_NODE(&cfqq->p_node);
+ INIT_LIST_HEAD(&cfqq->fifo);
+
+ atomic_set(&cfqq->ref, 0);
+ cfqq->cfqd = cfqd;
+
+ cfq_mark_cfqq_prio_changed(cfqq);
+
+ if (is_sync) {
+ if (!cfq_class_idle(cfqq))
+ cfq_mark_cfqq_idle_window(cfqq);
+ cfq_mark_cfqq_sync(cfqq);
+ }
+ cfqq->pid = pid;
+}
+
static struct cfq_queue *
cfq_find_alloc_queue(struct cfq_data *cfqd, int is_sync,
struct io_context *ioc, gfp_t gfp_mask)
@@ -1653,56 +1678,40 @@
/* cic always exists here */
cfqq = cic_to_cfqq(cic, is_sync);
- if (!cfqq) {
+ /*
+ * Always try a new alloc if we fell back to the OOM cfqq
+ * originally, since it should just be a temporary situation.
+ */
+ if (!cfqq || cfqq == &cfqd->oom_cfqq) {
+ cfqq = NULL;
if (new_cfqq) {
cfqq = new_cfqq;
new_cfqq = NULL;
} else if (gfp_mask & __GFP_WAIT) {
- /*
- * Inform the allocator of the fact that we will
- * just repeat this allocation if it fails, to allow
- * the allocator to do whatever it needs to attempt to
- * free memory.
- */
spin_unlock_irq(cfqd->queue->queue_lock);
new_cfqq = kmem_cache_alloc_node(cfq_pool,
- gfp_mask | __GFP_NOFAIL | __GFP_ZERO,
+ gfp_mask | __GFP_ZERO,
cfqd->queue->node);
spin_lock_irq(cfqd->queue->queue_lock);
- goto retry;
+ if (new_cfqq)
+ goto retry;
} else {
cfqq = kmem_cache_alloc_node(cfq_pool,
gfp_mask | __GFP_ZERO,
cfqd->queue->node);
- if (!cfqq)
- goto out;
}
- RB_CLEAR_NODE(&cfqq->rb_node);
- RB_CLEAR_NODE(&cfqq->p_node);
- INIT_LIST_HEAD(&cfqq->fifo);
-
- atomic_set(&cfqq->ref, 0);
- cfqq->cfqd = cfqd;
-
- cfq_mark_cfqq_prio_changed(cfqq);
-
- cfq_init_prio_data(cfqq, ioc);
-
- if (is_sync) {
- if (!cfq_class_idle(cfqq))
- cfq_mark_cfqq_idle_window(cfqq);
- cfq_mark_cfqq_sync(cfqq);
- }
- cfqq->pid = current->pid;
- cfq_log_cfqq(cfqd, cfqq, "alloced");
+ if (cfqq) {
+ cfq_init_cfqq(cfqd, cfqq, current->pid, is_sync);
+ cfq_init_prio_data(cfqq, ioc);
+ cfq_log_cfqq(cfqd, cfqq, "alloced");
+ } else
+ cfqq = &cfqd->oom_cfqq;
}
if (new_cfqq)
kmem_cache_free(cfq_pool, new_cfqq);
-out:
- WARN_ON((gfp_mask & __GFP_WAIT) && !cfqq);
return cfqq;
}
@@ -1735,11 +1744,8 @@
cfqq = *async_cfqq;
}
- if (!cfqq) {
+ if (!cfqq)
cfqq = cfq_find_alloc_queue(cfqd, is_sync, ioc, gfp_mask);
- if (!cfqq)
- return NULL;
- }
/*
* pin the queue now that it's allocated, scheduler exit will prune it
@@ -2305,12 +2311,8 @@
goto queue_fail;
cfqq = cic_to_cfqq(cic, is_sync);
- if (!cfqq) {
+ if (!cfqq || cfqq == &cfqd->oom_cfqq) {
cfqq = cfq_get_queue(cfqd, is_sync, cic->ioc, gfp_mask);
-
- if (!cfqq)
- goto queue_fail;
-
cic_set_cfqq(cic, cfqq, is_sync);
}
@@ -2465,6 +2467,14 @@
for (i = 0; i < CFQ_PRIO_LISTS; i++)
cfqd->prio_trees[i] = RB_ROOT;
+ /*
+ * Our fallback cfqq if cfq_find_alloc_queue() runs into OOM issues.
+ * Grab a permanent reference to it, so that the normal code flow
+ * will not attempt to free it.
+ */
+ cfq_init_cfqq(cfqd, &cfqd->oom_cfqq, 1, 0);
+ atomic_inc(&cfqd->oom_cfqq.ref);
+
INIT_LIST_HEAD(&cfqd->cic_list);
cfqd->queue = q;
diff --git a/block/cmd-filter.c b/block/cmd-filter.c
deleted file mode 100644
index 572bbc2..0000000
--- a/block/cmd-filter.c
+++ /dev/null
@@ -1,233 +0,0 @@
-/*
- * Copyright 2004 Peter M. Jones <pjones@redhat.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public Licens
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-
- *
- */
-
-#include <linux/list.h>
-#include <linux/genhd.h>
-#include <linux/spinlock.h>
-#include <linux/capability.h>
-#include <linux/bitops.h>
-#include <linux/blkdev.h>
-
-#include <scsi/scsi.h>
-#include <linux/cdrom.h>
-
-int blk_verify_command(struct blk_cmd_filter *filter,
- unsigned char *cmd, fmode_t has_write_perm)
-{
- /* root can do any command. */
- if (capable(CAP_SYS_RAWIO))
- return 0;
-
- /* if there's no filter set, assume we're filtering everything out */
- if (!filter)
- return -EPERM;
-
- /* Anybody who can open the device can do a read-safe command */
- if (test_bit(cmd[0], filter->read_ok))
- return 0;
-
- /* Write-safe commands require a writable open */
- if (test_bit(cmd[0], filter->write_ok) && has_write_perm)
- return 0;
-
- return -EPERM;
-}
-EXPORT_SYMBOL(blk_verify_command);
-
-#if 0
-/* and now, the sysfs stuff */
-static ssize_t rcf_cmds_show(struct blk_cmd_filter *filter, char *page,
- int rw)
-{
- char *npage = page;
- unsigned long *okbits;
- int i;
-
- if (rw == READ)
- okbits = filter->read_ok;
- else
- okbits = filter->write_ok;
-
- for (i = 0; i < BLK_SCSI_MAX_CMDS; i++) {
- if (test_bit(i, okbits)) {
- npage += sprintf(npage, "0x%02x", i);
- if (i < BLK_SCSI_MAX_CMDS - 1)
- sprintf(npage++, " ");
- }
- }
-
- if (npage != page)
- npage += sprintf(npage, "\n");
-
- return npage - page;
-}
-
-static ssize_t rcf_readcmds_show(struct blk_cmd_filter *filter, char *page)
-{
- return rcf_cmds_show(filter, page, READ);
-}
-
-static ssize_t rcf_writecmds_show(struct blk_cmd_filter *filter,
- char *page)
-{
- return rcf_cmds_show(filter, page, WRITE);
-}
-
-static ssize_t rcf_cmds_store(struct blk_cmd_filter *filter,
- const char *page, size_t count, int rw)
-{
- unsigned long okbits[BLK_SCSI_CMD_PER_LONG], *target_okbits;
- int cmd, set;
- char *p, *status;
-
- if (rw == READ) {
- memcpy(&okbits, filter->read_ok, sizeof(okbits));
- target_okbits = filter->read_ok;
- } else {
- memcpy(&okbits, filter->write_ok, sizeof(okbits));
- target_okbits = filter->write_ok;
- }
-
- while ((p = strsep((char **)&page, " ")) != NULL) {
- set = 1;
-
- if (p[0] == '+') {
- p++;
- } else if (p[0] == '-') {
- set = 0;
- p++;
- }
-
- cmd = simple_strtol(p, &status, 16);
-
- /* either of these cases means invalid input, so do nothing. */
- if ((status == p) || cmd >= BLK_SCSI_MAX_CMDS)
- return -EINVAL;
-
- if (set)
- __set_bit(cmd, okbits);
- else
- __clear_bit(cmd, okbits);
- }
-
- memcpy(target_okbits, okbits, sizeof(okbits));
- return count;
-}
-
-static ssize_t rcf_readcmds_store(struct blk_cmd_filter *filter,
- const char *page, size_t count)
-{
- return rcf_cmds_store(filter, page, count, READ);
-}
-
-static ssize_t rcf_writecmds_store(struct blk_cmd_filter *filter,
- const char *page, size_t count)
-{
- return rcf_cmds_store(filter, page, count, WRITE);
-}
-
-struct rcf_sysfs_entry {
- struct attribute attr;
- ssize_t (*show)(struct blk_cmd_filter *, char *);
- ssize_t (*store)(struct blk_cmd_filter *, const char *, size_t);
-};
-
-static struct rcf_sysfs_entry rcf_readcmds_entry = {
- .attr = { .name = "read_table", .mode = S_IRUGO | S_IWUSR },
- .show = rcf_readcmds_show,
- .store = rcf_readcmds_store,
-};
-
-static struct rcf_sysfs_entry rcf_writecmds_entry = {
- .attr = {.name = "write_table", .mode = S_IRUGO | S_IWUSR },
- .show = rcf_writecmds_show,
- .store = rcf_writecmds_store,
-};
-
-static struct attribute *default_attrs[] = {
- &rcf_readcmds_entry.attr,
- &rcf_writecmds_entry.attr,
- NULL,
-};
-
-#define to_rcf(atr) container_of((atr), struct rcf_sysfs_entry, attr)
-
-static ssize_t
-rcf_attr_show(struct kobject *kobj, struct attribute *attr, char *page)
-{
- struct rcf_sysfs_entry *entry = to_rcf(attr);
- struct blk_cmd_filter *filter;
-
- filter = container_of(kobj, struct blk_cmd_filter, kobj);
- if (entry->show)
- return entry->show(filter, page);
-
- return 0;
-}
-
-static ssize_t
-rcf_attr_store(struct kobject *kobj, struct attribute *attr,
- const char *page, size_t length)
-{
- struct rcf_sysfs_entry *entry = to_rcf(attr);
- struct blk_cmd_filter *filter;
-
- if (!capable(CAP_SYS_RAWIO))
- return -EPERM;
-
- if (!entry->store)
- return -EINVAL;
-
- filter = container_of(kobj, struct blk_cmd_filter, kobj);
- return entry->store(filter, page, length);
-}
-
-static struct sysfs_ops rcf_sysfs_ops = {
- .show = rcf_attr_show,
- .store = rcf_attr_store,
-};
-
-static struct kobj_type rcf_ktype = {
- .sysfs_ops = &rcf_sysfs_ops,
- .default_attrs = default_attrs,
-};
-
-int blk_register_filter(struct gendisk *disk)
-{
- int ret;
- struct blk_cmd_filter *filter = &disk->queue->cmd_filter;
-
- ret = kobject_init_and_add(&filter->kobj, &rcf_ktype,
- &disk_to_dev(disk)->kobj,
- "%s", "cmd_filter");
- if (ret < 0)
- return ret;
-
- return 0;
-}
-EXPORT_SYMBOL(blk_register_filter);
-
-void blk_unregister_filter(struct gendisk *disk)
-{
- struct blk_cmd_filter *filter = &disk->queue->cmd_filter;
-
- kobject_put(&filter->kobj);
-}
-EXPORT_SYMBOL(blk_unregister_filter);
-#endif
diff --git a/block/elevator.c b/block/elevator.c
index ca86192..6f23753 100644
--- a/block/elevator.c
+++ b/block/elevator.c
@@ -100,6 +100,14 @@
if (bio_integrity(bio) != blk_integrity_rq(rq))
return 0;
+ /*
+ * Don't merge if failfast settings don't match
+ */
+ if (bio_failfast_dev(bio) != blk_failfast_dev(rq) ||
+ bio_failfast_transport(bio) != blk_failfast_transport(rq) ||
+ bio_failfast_driver(bio) != blk_failfast_driver(rq))
+ return 0;
+
if (!elv_iosched_allow_merge(rq, bio))
return 0;
diff --git a/block/scsi_ioctl.c b/block/scsi_ioctl.c
index 5f8e798..e5b1001 100644
--- a/block/scsi_ioctl.c
+++ b/block/scsi_ioctl.c
@@ -32,6 +32,11 @@
#include <scsi/scsi_ioctl.h>
#include <scsi/scsi_cmnd.h>
+struct blk_cmd_filter {
+ unsigned long read_ok[BLK_SCSI_CMD_PER_LONG];
+ unsigned long write_ok[BLK_SCSI_CMD_PER_LONG];
+} blk_default_cmd_filter;
+
/* Command group 3 is reserved and should never be used. */
const unsigned char scsi_command_size_tbl[8] =
{
@@ -105,7 +110,7 @@
return put_user(1, p);
}
-void blk_set_cmd_filter_defaults(struct blk_cmd_filter *filter)
+static void blk_set_cmd_filter_defaults(struct blk_cmd_filter *filter)
{
/* Basic read-only commands */
__set_bit(TEST_UNIT_READY, filter->read_ok);
@@ -187,14 +192,37 @@
__set_bit(GPCMD_SET_STREAMING, filter->write_ok);
__set_bit(GPCMD_SET_READ_AHEAD, filter->write_ok);
}
-EXPORT_SYMBOL_GPL(blk_set_cmd_filter_defaults);
+
+int blk_verify_command(unsigned char *cmd, fmode_t has_write_perm)
+{
+ struct blk_cmd_filter *filter = &blk_default_cmd_filter;
+
+ /* root can do any command. */
+ if (capable(CAP_SYS_RAWIO))
+ return 0;
+
+ /* if there's no filter set, assume we're filtering everything out */
+ if (!filter)
+ return -EPERM;
+
+ /* Anybody who can open the device can do a read-safe command */
+ if (test_bit(cmd[0], filter->read_ok))
+ return 0;
+
+ /* Write-safe commands require a writable open */
+ if (test_bit(cmd[0], filter->write_ok) && has_write_perm)
+ return 0;
+
+ return -EPERM;
+}
+EXPORT_SYMBOL(blk_verify_command);
static int blk_fill_sghdr_rq(struct request_queue *q, struct request *rq,
struct sg_io_hdr *hdr, fmode_t mode)
{
if (copy_from_user(rq->cmd, hdr->cmdp, hdr->cmd_len))
return -EFAULT;
- if (blk_verify_command(&q->cmd_filter, rq->cmd, mode & FMODE_WRITE))
+ if (blk_verify_command(rq->cmd, mode & FMODE_WRITE))
return -EPERM;
/*
@@ -427,7 +455,7 @@
if (in_len && copy_from_user(buffer, sic->data + cmdlen, in_len))
goto error;
- err = blk_verify_command(&q->cmd_filter, rq->cmd, mode & FMODE_WRITE);
+ err = blk_verify_command(rq->cmd, mode & FMODE_WRITE);
if (err)
goto error;
@@ -645,5 +673,11 @@
blk_put_queue(q);
return err;
}
-
EXPORT_SYMBOL(scsi_cmd_ioctl);
+
+int __init blk_scsi_ioctl_init(void)
+{
+ blk_set_cmd_filter_defaults(&blk_default_cmd_filter);
+ return 0;
+}
+fs_initcall(blk_scsi_ioctl_init);
diff --git a/drivers/acpi/pci_root.c b/drivers/acpi/pci_root.c
index 8a5bf3b..55b5b90 100644
--- a/drivers/acpi/pci_root.c
+++ b/drivers/acpi/pci_root.c
@@ -395,7 +395,7 @@
fn = adr & 0xffff;
pdev = pci_get_slot(pbus, PCI_DEVFN(dev, fn));
- if (hnd == handle)
+ if (!pdev || hnd == handle)
break;
pbus = pdev->subordinate;
diff --git a/drivers/amba/bus.c b/drivers/amba/bus.c
index 3d763fd..2466506 100644
--- a/drivers/amba/bus.c
+++ b/drivers/amba/bus.c
@@ -207,6 +207,16 @@
void __iomem *tmp;
int i, ret;
+ device_initialize(&dev->dev);
+
+ /*
+ * Copy from device_add
+ */
+ if (dev->dev.init_name) {
+ dev_set_name(&dev->dev, "%s", dev->dev.init_name);
+ dev->dev.init_name = NULL;
+ }
+
dev->dev.release = amba_device_release;
dev->dev.bus = &amba_bustype;
dev->dev.dma_mask = &dev->dma_mask;
@@ -240,7 +250,7 @@
goto err_release;
}
- ret = device_register(&dev->dev);
+ ret = device_add(&dev->dev);
if (ret)
goto err_release;
diff --git a/drivers/base/devres.c b/drivers/base/devres.c
index e8beb8e..05dd307 100644
--- a/drivers/base/devres.c
+++ b/drivers/base/devres.c
@@ -428,6 +428,9 @@
{
unsigned long flags;
+ /* Looks like an uninitialized device structure */
+ if (WARN_ON(dev->devres_head.next == NULL))
+ return -ENODEV;
spin_lock_irqsave(&dev->devres_lock, flags);
return release_nodes(dev, dev->devres_head.next, &dev->devres_head,
flags);
diff --git a/drivers/base/firmware_class.c b/drivers/base/firmware_class.c
index ddeb819..f285f44 100644
--- a/drivers/base/firmware_class.c
+++ b/drivers/base/firmware_class.c
@@ -217,8 +217,10 @@
ret_count = -ENODEV;
goto out;
}
- if (offset > fw->size)
- return 0;
+ if (offset > fw->size) {
+ ret_count = 0;
+ goto out;
+ }
if (count > fw->size - offset)
count = fw->size - offset;
@@ -357,7 +359,7 @@
kfree(fw_priv->pages);
kfree(fw_priv->fw_id);
kfree(fw_priv);
- put_device(dev);
+ kfree(dev);
module_put(THIS_MODULE);
}
@@ -408,13 +410,11 @@
if (retval) {
dev_err(device, "%s: device_register failed\n", __func__);
put_device(f_dev);
- goto error_kfree_fw_id;
+ return retval;
}
*dev_p = f_dev;
return 0;
-error_kfree_fw_id:
- kfree(fw_priv->fw_id);
error_kfree:
kfree(f_dev);
kfree(fw_priv);
diff --git a/drivers/base/power/main.c b/drivers/base/power/main.c
index fae7254..58a3e57 100644
--- a/drivers/base/power/main.c
+++ b/drivers/base/power/main.c
@@ -762,6 +762,7 @@
dev->power.status = DPM_ON;
if (error == -EAGAIN) {
put_device(dev);
+ error = 0;
continue;
}
printk(KERN_ERR "PM: Failed to prepare device %s "
diff --git a/drivers/block/DAC960.c b/drivers/block/DAC960.c
index 668dc23..1e6b7c1 100644
--- a/drivers/block/DAC960.c
+++ b/drivers/block/DAC960.c
@@ -36,6 +36,7 @@
#include <linux/ioport.h>
#include <linux/mm.h>
#include <linux/slab.h>
+#include <linux/smp_lock.h>
#include <linux/proc_fs.h>
#include <linux/reboot.h>
#include <linux/spinlock.h>
diff --git a/drivers/block/Kconfig b/drivers/block/Kconfig
index bb72ada..1d886e0 100644
--- a/drivers/block/Kconfig
+++ b/drivers/block/Kconfig
@@ -298,6 +298,22 @@
If unsure, say N.
+config BLK_DEV_OSD
+ tristate "OSD object-as-blkdev support"
+ depends on SCSI_OSD_ULD
+ ---help---
+ Saying Y or M here will allow the exporting of a single SCSI
+ OSD (object-based storage) object as a Linux block device.
+
+ For example, if you create a 2G object on an OSD device,
+ you can then use this module to present that 2G object as
+ a Linux block device.
+
+ To compile this driver as a module, choose M here: the
+ module will be called osdblk.
+
+ If unsure, say N.
+
config BLK_DEV_SX8
tristate "Promise SATA SX8 support"
depends on PCI
diff --git a/drivers/block/Makefile b/drivers/block/Makefile
index 7755a5e2..cdaa3f8 100644
--- a/drivers/block/Makefile
+++ b/drivers/block/Makefile
@@ -23,6 +23,7 @@
obj-$(CONFIG_CDROM_PKTCDVD) += pktcdvd.o
obj-$(CONFIG_MG_DISK) += mg_disk.o
obj-$(CONFIG_SUNVDC) += sunvdc.o
+obj-$(CONFIG_BLK_DEV_OSD) += osdblk.o
obj-$(CONFIG_BLK_DEV_UMEM) += umem.o
obj-$(CONFIG_BLK_DEV_NBD) += nbd.o
diff --git a/drivers/block/amiflop.c b/drivers/block/amiflop.c
index 9c6e5b0..2f07b7c 100644
--- a/drivers/block/amiflop.c
+++ b/drivers/block/amiflop.c
@@ -1645,7 +1645,7 @@
{
int drive,drives,nomem;
- printk(KERN_INFO "FD: probing units\n" KERN_INFO "found ");
+ printk(KERN_INFO "FD: probing units\nfound ");
drives=0;
nomem=0;
for(drive=0;drive<FD_MAX_UNITS;drive++) {
diff --git a/drivers/block/cciss.c b/drivers/block/cciss.c
index c7a527c..a52cc7f 100644
--- a/drivers/block/cciss.c
+++ b/drivers/block/cciss.c
@@ -26,6 +26,7 @@
#include <linux/pci.h>
#include <linux/kernel.h>
#include <linux/slab.h>
+#include <linux/smp_lock.h>
#include <linux/delay.h>
#include <linux/major.h>
#include <linux/fs.h>
@@ -226,8 +227,18 @@
static inline void removeQ(CommandList_struct *c)
{
- if (WARN_ON(hlist_unhashed(&c->list)))
+ /*
+ * After kexec/dump some commands might still
+ * be in flight, which the firmware will try
+ * to complete. Resetting the firmware doesn't work
+ * with old fw revisions, so we have to mark
+ * them off as 'stale' to prevent the driver from
+ * falling over.
+ */
+ if (WARN_ON(hlist_unhashed(&c->list))) {
+ c->cmd_type = CMD_MSG_STALE;
return;
+ }
hlist_del_init(&c->list);
}
@@ -4246,7 +4257,8 @@
while (!hlist_empty(&h->cmpQ)) {
c = hlist_entry(h->cmpQ.first, CommandList_struct, list);
removeQ(c);
- c->err_info->CommandStatus = CMD_HARDWARE_ERR;
+ if (c->cmd_type != CMD_MSG_STALE)
+ c->err_info->CommandStatus = CMD_HARDWARE_ERR;
if (c->cmd_type == CMD_RWREQ) {
complete_command(h, c, 0);
} else if (c->cmd_type == CMD_IOCTL_PEND)
diff --git a/drivers/block/cciss_cmd.h b/drivers/block/cciss_cmd.h
index cd665b0..dbaed1e 100644
--- a/drivers/block/cciss_cmd.h
+++ b/drivers/block/cciss_cmd.h
@@ -274,6 +274,7 @@
#define CMD_SCSI 0x03
#define CMD_MSG_DONE 0x04
#define CMD_MSG_TIMEOUT 0x05
+#define CMD_MSG_STALE 0xff
/* This structure needs to be divisible by 8 for new
* indexing method.
diff --git a/drivers/block/floppy.c b/drivers/block/floppy.c
index 862b40c..91b7530 100644
--- a/drivers/block/floppy.c
+++ b/drivers/block/floppy.c
@@ -3327,7 +3327,10 @@
if (!capable(CAP_SYS_ADMIN))
return -EPERM;
mutex_lock(&open_lock);
- LOCK_FDC(drive, 1);
+ if (lock_fdc(drive, 1)) {
+ mutex_unlock(&open_lock);
+ return -EINTR;
+ }
floppy_type[type] = *g;
floppy_type[type].name = "user format";
for (cnt = type << 2; cnt < (type << 2) + 4; cnt++)
diff --git a/drivers/block/loop.c b/drivers/block/loop.c
index 801f4ab..5757188 100644
--- a/drivers/block/loop.c
+++ b/drivers/block/loop.c
@@ -61,7 +61,6 @@
#include <linux/blkdev.h>
#include <linux/blkpg.h>
#include <linux/init.h>
-#include <linux/smp_lock.h>
#include <linux/swap.h>
#include <linux/slab.h>
#include <linux/loop.h>
diff --git a/drivers/block/osdblk.c b/drivers/block/osdblk.c
new file mode 100644
index 0000000..13c1aee
--- /dev/null
+++ b/drivers/block/osdblk.c
@@ -0,0 +1,701 @@
+
+/*
+ osdblk.c -- Export a single SCSI OSD object as a Linux block device
+
+
+ Copyright 2009 Red Hat, Inc.
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; see the file COPYING. If not, write to
+ the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
+
+
+ Instructions for use
+ --------------------
+
+ 1) Map a Linux block device to an existing OSD object.
+
+ In this example, we will use partition id 1234, object id 5678,
+ OSD device /dev/osd1.
+
+ $ echo "1234 5678 /dev/osd1" > /sys/class/osdblk/add
+
+
+ 2) List all active blkdev<->object mappings.
+
+ In this example, we have performed step #1 twice, creating two blkdevs,
+ mapped to two separate OSD objects.
+
+ $ cat /sys/class/osdblk/list
+ 0 174 1234 5678 /dev/osd1
+ 1 179 1994 897123 /dev/osd0
+
+ The columns, in order, are:
+ - blkdev unique id
+ - blkdev assigned major
+ - OSD object partition id
+ - OSD object id
+ - OSD device
+
+
+ 3) Remove an active blkdev<->object mapping.
+
+ In this example, we remove the mapping with blkdev unique id 1.
+
+ $ echo 1 > /sys/class/osdblk/remove
+
+
+ NOTE: The actual creation and deletion of OSD objects is outside the scope
+ of this driver.
+
+ */
+
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/module.h>
+#include <linux/fs.h>
+#include <scsi/osd_initiator.h>
+#include <scsi/osd_attributes.h>
+#include <scsi/osd_sec.h>
+#include <scsi/scsi_device.h>
+
+#define DRV_NAME "osdblk"
+#define PFX DRV_NAME ": "
+
+/* #define _OSDBLK_DEBUG */
+#ifdef _OSDBLK_DEBUG
+#define OSDBLK_DEBUG(fmt, a...) \
+ printk(KERN_NOTICE "osdblk @%s:%d: " fmt, __func__, __LINE__, ##a)
+#else
+#define OSDBLK_DEBUG(fmt, a...) \
+ do { if (0) printk(fmt, ##a); } while (0)
+#endif
+
+MODULE_AUTHOR("Jeff Garzik <jeff@garzik.org>");
+MODULE_DESCRIPTION("block device inside an OSD object osdblk.ko");
+MODULE_LICENSE("GPL");
+
+struct osdblk_device;
+
+enum {
+ OSDBLK_MINORS_PER_MAJOR = 256, /* max minors per blkdev */
+ OSDBLK_MAX_REQ = 32, /* max parallel requests */
+ OSDBLK_OP_TIMEOUT = 4 * 60, /* sync OSD req timeout */
+};
+
+struct osdblk_request {
+ struct request *rq; /* blk layer request */
+ struct bio *bio; /* cloned bio */
+ struct osdblk_device *osdev; /* associated blkdev */
+};
+
+struct osdblk_device {
+ int id; /* blkdev unique id */
+
+ int major; /* blkdev assigned major */
+ struct gendisk *disk; /* blkdev's gendisk and rq */
+ struct request_queue *q;
+
+ struct osd_dev *osd; /* associated OSD */
+
+ char name[32]; /* blkdev name, e.g. osdblk34 */
+
+ spinlock_t lock; /* queue lock */
+
+ struct osd_obj_id obj; /* OSD partition, obj id */
+ uint8_t obj_cred[OSD_CAP_LEN]; /* OSD cred */
+
+ struct osdblk_request req[OSDBLK_MAX_REQ]; /* request table */
+
+ struct list_head node;
+
+ char osd_path[0]; /* OSD device path */
+};
+
+static struct class *class_osdblk; /* /sys/class/osdblk */
+static DEFINE_MUTEX(ctl_mutex); /* Serialize open/close/setup/teardown */
+static LIST_HEAD(osdblkdev_list);
+
+static struct block_device_operations osdblk_bd_ops = {
+ .owner = THIS_MODULE,
+};
+
+static const struct osd_attr g_attr_logical_length = ATTR_DEF(
+ OSD_APAGE_OBJECT_INFORMATION, OSD_ATTR_OI_LOGICAL_LENGTH, 8);
+
+static void osdblk_make_credential(u8 cred_a[OSD_CAP_LEN],
+ const struct osd_obj_id *obj)
+{
+ osd_sec_init_nosec_doall_caps(cred_a, obj, false, true);
+}
+
+/* copied from exofs; move to libosd? */
+/*
+ * Perform a synchronous OSD operation. copied from exofs; move to libosd?
+ */
+static int osd_sync_op(struct osd_request *or, int timeout, uint8_t *credential)
+{
+ int ret;
+
+ or->timeout = timeout;
+ ret = osd_finalize_request(or, 0, credential, NULL);
+ if (ret)
+ return ret;
+
+ ret = osd_execute_request(or);
+
+ /* osd_req_decode_sense(or, ret); */
+ return ret;
+}
+
+/*
+ * Perform an asynchronous OSD operation. copied from exofs; move to libosd?
+ */
+static int osd_async_op(struct osd_request *or, osd_req_done_fn *async_done,
+ void *caller_context, u8 *cred)
+{
+ int ret;
+
+ ret = osd_finalize_request(or, 0, cred, NULL);
+ if (ret)
+ return ret;
+
+ ret = osd_execute_request_async(or, async_done, caller_context);
+
+ return ret;
+}
+
+/* copied from exofs; move to libosd? */
+static int extract_attr_from_req(struct osd_request *or, struct osd_attr *attr)
+{
+ struct osd_attr cur_attr = {.attr_page = 0}; /* start with zeros */
+ void *iter = NULL;
+ int nelem;
+
+ do {
+ nelem = 1;
+ osd_req_decode_get_attr_list(or, &cur_attr, &nelem, &iter);
+ if ((cur_attr.attr_page == attr->attr_page) &&
+ (cur_attr.attr_id == attr->attr_id)) {
+ attr->len = cur_attr.len;
+ attr->val_ptr = cur_attr.val_ptr;
+ return 0;
+ }
+ } while (iter);
+
+ return -EIO;
+}
+
+static int osdblk_get_obj_size(struct osdblk_device *osdev, u64 *size_out)
+{
+ struct osd_request *or;
+ struct osd_attr attr;
+ int ret;
+
+ /* start request */
+ or = osd_start_request(osdev->osd, GFP_KERNEL);
+ if (!or)
+ return -ENOMEM;
+
+ /* create a get-attributes(length) request */
+ osd_req_get_attributes(or, &osdev->obj);
+
+ osd_req_add_get_attr_list(or, &g_attr_logical_length, 1);
+
+ /* execute op synchronously */
+ ret = osd_sync_op(or, OSDBLK_OP_TIMEOUT, osdev->obj_cred);
+ if (ret)
+ goto out;
+
+ /* extract length from returned attribute info */
+ attr = g_attr_logical_length;
+ ret = extract_attr_from_req(or, &attr);
+ if (ret)
+ goto out;
+
+ *size_out = get_unaligned_be64(attr.val_ptr);
+
+out:
+ osd_end_request(or);
+ return ret;
+
+}
+
+static void osdblk_osd_complete(struct osd_request *or, void *private)
+{
+ struct osdblk_request *orq = private;
+ struct osd_sense_info osi;
+ int ret = osd_req_decode_sense(or, &osi);
+
+ if (ret) {
+ ret = -EIO;
+ OSDBLK_DEBUG("osdblk_osd_complete with err=%d\n", ret);
+ }
+
+ /* complete OSD request */
+ osd_end_request(or);
+
+ /* complete request passed to osdblk by block layer */
+ __blk_end_request_all(orq->rq, ret);
+}
+
+static void bio_chain_put(struct bio *chain)
+{
+ struct bio *tmp;
+
+ while (chain) {
+ tmp = chain;
+ chain = chain->bi_next;
+
+ bio_put(tmp);
+ }
+}
+
+static struct bio *bio_chain_clone(struct bio *old_chain, gfp_t gfpmask)
+{
+ struct bio *tmp, *new_chain = NULL, *tail = NULL;
+
+ while (old_chain) {
+ tmp = bio_kmalloc(gfpmask, old_chain->bi_max_vecs);
+ if (!tmp)
+ goto err_out;
+
+ __bio_clone(tmp, old_chain);
+ tmp->bi_bdev = NULL;
+ gfpmask &= ~__GFP_WAIT;
+ tmp->bi_next = NULL;
+
+ if (!new_chain)
+ new_chain = tail = tmp;
+ else {
+ tail->bi_next = tmp;
+ tail = tmp;
+ }
+
+ old_chain = old_chain->bi_next;
+ }
+
+ return new_chain;
+
+err_out:
+ OSDBLK_DEBUG("bio_chain_clone with err\n");
+ bio_chain_put(new_chain);
+ return NULL;
+}
+
+static void osdblk_rq_fn(struct request_queue *q)
+{
+ struct osdblk_device *osdev = q->queuedata;
+
+ while (1) {
+ struct request *rq;
+ struct osdblk_request *orq;
+ struct osd_request *or;
+ struct bio *bio;
+ bool do_write, do_flush;
+
+ /* peek at request from block layer */
+ rq = blk_fetch_request(q);
+ if (!rq)
+ break;
+
+ /* filter out block requests we don't understand */
+ if (!blk_fs_request(rq) && !blk_barrier_rq(rq)) {
+ blk_end_request_all(rq, 0);
+ continue;
+ }
+
+ /* deduce our operation (read, write, flush) */
+ /* I wish the block layer simplified cmd_type/cmd_flags/cmd[]
+ * into a clearly defined set of RPC commands:
+ * read, write, flush, scsi command, power mgmt req,
+ * driver-specific, etc.
+ */
+
+ do_flush = (rq->special == (void *) 0xdeadbeefUL);
+ do_write = (rq_data_dir(rq) == WRITE);
+
+ if (!do_flush) { /* osd_flush does not use a bio */
+ /* a bio clone to be passed down to OSD request */
+ bio = bio_chain_clone(rq->bio, GFP_ATOMIC);
+ if (!bio)
+ break;
+ } else
+ bio = NULL;
+
+ /* alloc internal OSD request, for OSD command execution */
+ or = osd_start_request(osdev->osd, GFP_ATOMIC);
+ if (!or) {
+ bio_chain_put(bio);
+ OSDBLK_DEBUG("osd_start_request with err\n");
+ break;
+ }
+
+ orq = &osdev->req[rq->tag];
+ orq->rq = rq;
+ orq->bio = bio;
+ orq->osdev = osdev;
+
+ /* init OSD command: flush, write or read */
+ if (do_flush)
+ osd_req_flush_object(or, &osdev->obj,
+ OSD_CDB_FLUSH_ALL, 0, 0);
+ else if (do_write)
+ osd_req_write(or, &osdev->obj, blk_rq_pos(rq) * 512ULL,
+ bio, blk_rq_bytes(rq));
+ else
+ osd_req_read(or, &osdev->obj, blk_rq_pos(rq) * 512ULL,
+ bio, blk_rq_bytes(rq));
+
+ OSDBLK_DEBUG("%s 0x%x bytes at 0x%llx\n",
+ do_flush ? "flush" : do_write ?
+ "write" : "read", blk_rq_bytes(rq),
+ blk_rq_pos(rq) * 512ULL);
+
+ /* begin OSD command execution */
+ if (osd_async_op(or, osdblk_osd_complete, orq,
+ osdev->obj_cred)) {
+ osd_end_request(or);
+ blk_requeue_request(q, rq);
+ bio_chain_put(bio);
+ OSDBLK_DEBUG("osd_execute_request_async with err\n");
+ break;
+ }
+
+ /* remove the special 'flush' marker, now that the command
+ * is executing
+ */
+ rq->special = NULL;
+ }
+}
+
+static void osdblk_prepare_flush(struct request_queue *q, struct request *rq)
+{
+ /* add driver-specific marker, to indicate that this request
+ * is a flush command
+ */
+ rq->special = (void *) 0xdeadbeefUL;
+}
+
+static void osdblk_free_disk(struct osdblk_device *osdev)
+{
+ struct gendisk *disk = osdev->disk;
+
+ if (!disk)
+ return;
+
+ if (disk->flags & GENHD_FL_UP)
+ del_gendisk(disk);
+ if (disk->queue)
+ blk_cleanup_queue(disk->queue);
+ put_disk(disk);
+}
+
+static int osdblk_init_disk(struct osdblk_device *osdev)
+{
+ struct gendisk *disk;
+ struct request_queue *q;
+ int rc;
+ u64 obj_size = 0;
+
+ /* contact OSD, request size info about the object being mapped */
+ rc = osdblk_get_obj_size(osdev, &obj_size);
+ if (rc)
+ return rc;
+
+ /* create gendisk info */
+ disk = alloc_disk(OSDBLK_MINORS_PER_MAJOR);
+ if (!disk)
+ return -ENOMEM;
+
+ sprintf(disk->disk_name, DRV_NAME "%d", osdev->id);
+ disk->major = osdev->major;
+ disk->first_minor = 0;
+ disk->fops = &osdblk_bd_ops;
+ disk->private_data = osdev;
+
+ /* init rq */
+ q = blk_init_queue(osdblk_rq_fn, &osdev->lock);
+ if (!q) {
+ put_disk(disk);
+ return -ENOMEM;
+ }
+
+ /* switch queue to TCQ mode; allocate tag map */
+ rc = blk_queue_init_tags(q, OSDBLK_MAX_REQ, NULL);
+ if (rc) {
+ blk_cleanup_queue(q);
+ put_disk(disk);
+ return rc;
+ }
+
+ /* Set our limits to the lower device limits, because osdblk cannot
+ * sleep when allocating a lower-request and therefore cannot be
+ * bouncing.
+ */
+ blk_queue_stack_limits(q, osd_request_queue(osdev->osd));
+
+ blk_queue_prep_rq(q, blk_queue_start_tag);
+ blk_queue_ordered(q, QUEUE_ORDERED_DRAIN_FLUSH, osdblk_prepare_flush);
+
+ disk->queue = q;
+
+ q->queuedata = osdev;
+
+ osdev->disk = disk;
+ osdev->q = q;
+
+ /* finally, announce the disk to the world */
+ set_capacity(disk, obj_size / 512ULL);
+ add_disk(disk);
+
+ printk(KERN_INFO "%s: Added of size 0x%llx\n",
+ disk->disk_name, (unsigned long long)obj_size);
+
+ return 0;
+}
+
+/********************************************************************
+ * /sys/class/osdblk/
+ * add map OSD object to blkdev
+ * remove unmap OSD object
+ * list show mappings
+ *******************************************************************/
+
+static void class_osdblk_release(struct class *cls)
+{
+ kfree(cls);
+}
+
+static ssize_t class_osdblk_list(struct class *c, char *data)
+{
+ int n = 0;
+ struct list_head *tmp;
+
+ mutex_lock_nested(&ctl_mutex, SINGLE_DEPTH_NESTING);
+
+ list_for_each(tmp, &osdblkdev_list) {
+ struct osdblk_device *osdev;
+
+ osdev = list_entry(tmp, struct osdblk_device, node);
+
+ n += sprintf(data+n, "%d %d %llu %llu %s\n",
+ osdev->id,
+ osdev->major,
+ osdev->obj.partition,
+ osdev->obj.id,
+ osdev->osd_path);
+ }
+
+ mutex_unlock(&ctl_mutex);
+ return n;
+}
+
+static ssize_t class_osdblk_add(struct class *c, const char *buf, size_t count)
+{
+ struct osdblk_device *osdev;
+ ssize_t rc;
+ int irc, new_id = 0;
+ struct list_head *tmp;
+
+ if (!try_module_get(THIS_MODULE))
+ return -ENODEV;
+
+ /* new osdblk_device object */
+ osdev = kzalloc(sizeof(*osdev) + strlen(buf) + 1, GFP_KERNEL);
+ if (!osdev) {
+ rc = -ENOMEM;
+ goto err_out_mod;
+ }
+
+ /* static osdblk_device initialization */
+ spin_lock_init(&osdev->lock);
+ INIT_LIST_HEAD(&osdev->node);
+
+ /* generate unique id: find highest unique id, add one */
+
+ mutex_lock_nested(&ctl_mutex, SINGLE_DEPTH_NESTING);
+
+ list_for_each(tmp, &osdblkdev_list) {
+ struct osdblk_device *osdev;
+
+ osdev = list_entry(tmp, struct osdblk_device, node);
+ if (osdev->id > new_id)
+ new_id = osdev->id + 1;
+ }
+
+ osdev->id = new_id;
+
+ /* add to global list */
+ list_add_tail(&osdev->node, &osdblkdev_list);
+
+ mutex_unlock(&ctl_mutex);
+
+ /* parse add command */
+ if (sscanf(buf, "%llu %llu %s", &osdev->obj.partition, &osdev->obj.id,
+ osdev->osd_path) != 3) {
+ rc = -EINVAL;
+ goto err_out_slot;
+ }
+
+ /* initialize rest of new object */
+ sprintf(osdev->name, DRV_NAME "%d", osdev->id);
+
+ /* contact requested OSD */
+ osdev->osd = osduld_path_lookup(osdev->osd_path);
+ if (IS_ERR(osdev->osd)) {
+ rc = PTR_ERR(osdev->osd);
+ goto err_out_slot;
+ }
+
+ /* build OSD credential */
+ osdblk_make_credential(osdev->obj_cred, &osdev->obj);
+
+ /* register our block device */
+ irc = register_blkdev(0, osdev->name);
+ if (irc < 0) {
+ rc = irc;
+ goto err_out_osd;
+ }
+
+ osdev->major = irc;
+
+ /* set up and announce blkdev mapping */
+ rc = osdblk_init_disk(osdev);
+ if (rc)
+ goto err_out_blkdev;
+
+ return count;
+
+err_out_blkdev:
+ unregister_blkdev(osdev->major, osdev->name);
+err_out_osd:
+ osduld_put_device(osdev->osd);
+err_out_slot:
+ mutex_lock_nested(&ctl_mutex, SINGLE_DEPTH_NESTING);
+ list_del_init(&osdev->node);
+ mutex_unlock(&ctl_mutex);
+
+ kfree(osdev);
+err_out_mod:
+ OSDBLK_DEBUG("Error adding device %s\n", buf);
+ module_put(THIS_MODULE);
+ return rc;
+}
+
+static ssize_t class_osdblk_remove(struct class *c, const char *buf,
+ size_t count)
+{
+ struct osdblk_device *osdev = NULL;
+ int target_id, rc;
+ unsigned long ul;
+ struct list_head *tmp;
+
+ rc = strict_strtoul(buf, 10, &ul);
+ if (rc)
+ return rc;
+
+ /* convert to int; abort if we lost anything in the conversion */
+ target_id = (int) ul;
+ if (target_id != ul)
+ return -EINVAL;
+
+ /* remove object from list immediately */
+ mutex_lock_nested(&ctl_mutex, SINGLE_DEPTH_NESTING);
+
+ list_for_each(tmp, &osdblkdev_list) {
+ osdev = list_entry(tmp, struct osdblk_device, node);
+ if (osdev->id == target_id) {
+ list_del_init(&osdev->node);
+ break;
+ }
+ osdev = NULL;
+ }
+
+ mutex_unlock(&ctl_mutex);
+
+ if (!osdev)
+ return -ENOENT;
+
+ /* clean up and free blkdev and associated OSD connection */
+ osdblk_free_disk(osdev);
+ unregister_blkdev(osdev->major, osdev->name);
+ osduld_put_device(osdev->osd);
+ kfree(osdev);
+
+ /* release module ref */
+ module_put(THIS_MODULE);
+
+ return count;
+}
+
+static struct class_attribute class_osdblk_attrs[] = {
+ __ATTR(add, 0200, NULL, class_osdblk_add),
+ __ATTR(remove, 0200, NULL, class_osdblk_remove),
+ __ATTR(list, 0444, class_osdblk_list, NULL),
+ __ATTR_NULL
+};
+
+static int osdblk_sysfs_init(void)
+{
+ int ret = 0;
+
+ /*
+ * create control files in sysfs
+ * /sys/class/osdblk/...
+ */
+ class_osdblk = kzalloc(sizeof(*class_osdblk), GFP_KERNEL);
+ if (!class_osdblk)
+ return -ENOMEM;
+
+ class_osdblk->name = DRV_NAME;
+ class_osdblk->owner = THIS_MODULE;
+ class_osdblk->class_release = class_osdblk_release;
+ class_osdblk->class_attrs = class_osdblk_attrs;
+
+ ret = class_register(class_osdblk);
+ if (ret) {
+ kfree(class_osdblk);
+ class_osdblk = NULL;
+ printk(PFX "failed to create class osdblk\n");
+ return ret;
+ }
+
+ return 0;
+}
+
+static void osdblk_sysfs_cleanup(void)
+{
+ if (class_osdblk)
+ class_destroy(class_osdblk);
+ class_osdblk = NULL;
+}
+
+static int __init osdblk_init(void)
+{
+ int rc;
+
+ rc = osdblk_sysfs_init();
+ if (rc)
+ return rc;
+
+ return 0;
+}
+
+static void __exit osdblk_exit(void)
+{
+ osdblk_sysfs_cleanup();
+}
+
+module_init(osdblk_init);
+module_exit(osdblk_exit);
+
diff --git a/drivers/block/pktcdvd.c b/drivers/block/pktcdvd.c
index 83650e0..99a506f 100644
--- a/drivers/block/pktcdvd.c
+++ b/drivers/block/pktcdvd.c
@@ -1372,8 +1372,10 @@
wakeup = (pd->write_congestion_on > 0
&& pd->bio_queue_size <= pd->write_congestion_off);
spin_unlock(&pd->lock);
- if (wakeup)
- clear_bdi_congested(&pd->disk->queue->backing_dev_info, WRITE);
+ if (wakeup) {
+ clear_bdi_congested(&pd->disk->queue->backing_dev_info,
+ BLK_RW_ASYNC);
+ }
pkt->sleep_time = max(PACKET_WAIT_TIME, 1);
pkt_set_state(pkt, PACKET_WAITING_STATE);
@@ -2592,10 +2594,10 @@
spin_lock(&pd->lock);
if (pd->write_congestion_on > 0
&& pd->bio_queue_size >= pd->write_congestion_on) {
- set_bdi_congested(&q->backing_dev_info, WRITE);
+ set_bdi_congested(&q->backing_dev_info, BLK_RW_ASYNC);
do {
spin_unlock(&pd->lock);
- congestion_wait(WRITE, HZ);
+ congestion_wait(BLK_RW_ASYNC, HZ);
spin_lock(&pd->lock);
} while(pd->bio_queue_size > pd->write_congestion_off);
}
diff --git a/drivers/block/xsysace.c b/drivers/block/xsysace.c
index f08491a..b20abe10 100644
--- a/drivers/block/xsysace.c
+++ b/drivers/block/xsysace.c
@@ -390,9 +390,10 @@
static void ace_dump_regs(struct ace_device *ace)
{
- dev_info(ace->dev, " ctrl: %.8x seccnt/cmd: %.4x ver:%.4x\n"
- KERN_INFO " status:%.8x mpu_lba:%.8x busmode:%4x\n"
- KERN_INFO " error: %.8x cfg_lba:%.8x fatstat:%.4x\n",
+ dev_info(ace->dev,
+ " ctrl: %.8x seccnt/cmd: %.4x ver:%.4x\n"
+ " status:%.8x mpu_lba:%.8x busmode:%4x\n"
+ " error: %.8x cfg_lba:%.8x fatstat:%.4x\n",
ace_in32(ace, ACE_CTRL),
ace_in(ace, ACE_SECCNTCMD),
ace_in(ace, ACE_VERSION),
diff --git a/drivers/bluetooth/hci_vhci.c b/drivers/bluetooth/hci_vhci.c
index 1df9dda..d5cde6d 100644
--- a/drivers/bluetooth/hci_vhci.c
+++ b/drivers/bluetooth/hci_vhci.c
@@ -28,7 +28,6 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/slab.h>
-#include <linux/smp_lock.h>
#include <linux/types.h>
#include <linux/errno.h>
#include <linux/sched.h>
diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig
index 0bd01f4..6a06913 100644
--- a/drivers/char/Kconfig
+++ b/drivers/char/Kconfig
@@ -1029,10 +1029,6 @@
If compiled as a module, it will be called cs5535_gpio.
-config GPIO_VR41XX
- tristate "NEC VR4100 series General-purpose I/O Unit support"
- depends on CPU_VR41XX
-
config RAW_DRIVER
tristate "RAW driver (/dev/raw/rawN)"
depends on BLOCK
diff --git a/drivers/char/Makefile b/drivers/char/Makefile
index 189efcf..66f779a 100644
--- a/drivers/char/Makefile
+++ b/drivers/char/Makefile
@@ -95,7 +95,6 @@
obj-$(CONFIG_PC8736x_GPIO) += pc8736x_gpio.o
obj-$(CONFIG_NSC_GPIO) += nsc_gpio.o
obj-$(CONFIG_CS5535_GPIO) += cs5535_gpio.o
-obj-$(CONFIG_GPIO_VR41XX) += vr41xx_giu.o
obj-$(CONFIG_GPIO_TB0219) += tb0219.o
obj-$(CONFIG_TELCLOCK) += tlclk.o
diff --git a/drivers/char/amiserial.c b/drivers/char/amiserial.c
index 72429b6..6c32fbf 100644
--- a/drivers/char/amiserial.c
+++ b/drivers/char/amiserial.c
@@ -81,6 +81,7 @@
#include <linux/mm.h>
#include <linux/seq_file.h>
#include <linux/slab.h>
+#include <linux/smp_lock.h>
#include <linux/init.h>
#include <linux/bitops.h>
diff --git a/drivers/char/bsr.c b/drivers/char/bsr.c
index 140ea10..c02db01f7 100644
--- a/drivers/char/bsr.c
+++ b/drivers/char/bsr.c
@@ -27,6 +27,7 @@
#include <linux/cdev.h>
#include <linux/list.h>
#include <linux/mm.h>
+#include <asm/pgtable.h>
#include <asm/io.h>
/*
@@ -75,12 +76,13 @@
static int bsr_major;
enum {
- BSR_8 = 0,
- BSR_16 = 1,
- BSR_64 = 2,
- BSR_128 = 3,
- BSR_UNKNOWN = 4,
- BSR_MAX = 5,
+ BSR_8 = 0,
+ BSR_16 = 1,
+ BSR_64 = 2,
+ BSR_128 = 3,
+ BSR_4096 = 4,
+ BSR_UNKNOWN = 5,
+ BSR_MAX = 6,
};
static unsigned bsr_types[BSR_MAX];
@@ -117,15 +119,22 @@
{
unsigned long size = vma->vm_end - vma->vm_start;
struct bsr_dev *dev = filp->private_data;
+ int ret;
- if (size > dev->bsr_len || (size & (PAGE_SIZE-1)))
- return -EINVAL;
-
- vma->vm_flags |= (VM_IO | VM_DONTEXPAND);
vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot);
- if (io_remap_pfn_range(vma, vma->vm_start, dev->bsr_addr >> PAGE_SHIFT,
- size, vma->vm_page_prot))
+ /* check for the case of a small BSR device and map one 4k page for it*/
+ if (dev->bsr_len < PAGE_SIZE && size == PAGE_SIZE)
+ ret = remap_4k_pfn(vma, vma->vm_start, dev->bsr_addr >> 12,
+ vma->vm_page_prot);
+ else if (size <= dev->bsr_len)
+ ret = io_remap_pfn_range(vma, vma->vm_start,
+ dev->bsr_addr >> PAGE_SHIFT,
+ size, vma->vm_page_prot);
+ else
+ return -EINVAL;
+
+ if (ret)
return -EAGAIN;
return 0;
@@ -205,6 +214,11 @@
cur->bsr_stride = bsr_stride[i];
cur->bsr_dev = MKDEV(bsr_major, i + total_bsr_devs);
+ /* if we have a bsr_len of > 4k and less then PAGE_SIZE (64k pages) */
+ /* we can only map 4k of it, so only advertise the 4k in sysfs */
+ if (cur->bsr_len > 4096 && cur->bsr_len < PAGE_SIZE)
+ cur->bsr_len = 4096;
+
switch(cur->bsr_bytes) {
case 8:
cur->bsr_type = BSR_8;
@@ -218,9 +232,11 @@
case 128:
cur->bsr_type = BSR_128;
break;
+ case 4096:
+ cur->bsr_type = BSR_4096;
+ break;
default:
cur->bsr_type = BSR_UNKNOWN;
- printk(KERN_INFO "unknown BSR size %d\n",cur->bsr_bytes);
}
cur->bsr_num = bsr_types[cur->bsr_type];
diff --git a/drivers/char/cyclades.c b/drivers/char/cyclades.c
index f3366d3..2dafc2d 100644
--- a/drivers/char/cyclades.c
+++ b/drivers/char/cyclades.c
@@ -633,6 +633,7 @@
#include <linux/tty.h>
#include <linux/tty_flip.h>
#include <linux/serial.h>
+#include <linux/smp_lock.h>
#include <linux/major.h>
#include <linux/string.h>
#include <linux/fcntl.h>
diff --git a/drivers/char/epca.c b/drivers/char/epca.c
index abef1f7..ff647ca 100644
--- a/drivers/char/epca.c
+++ b/drivers/char/epca.c
@@ -36,6 +36,7 @@
#include <linux/tty.h>
#include <linux/tty_flip.h>
#include <linux/slab.h>
+#include <linux/smp_lock.h>
#include <linux/ioport.h>
#include <linux/interrupt.h>
#include <linux/uaccess.h>
diff --git a/drivers/char/hw_random/intel-rng.c b/drivers/char/hw_random/intel-rng.c
index 5dcbe60..91b53eb 100644
--- a/drivers/char/hw_random/intel-rng.c
+++ b/drivers/char/hw_random/intel-rng.c
@@ -305,10 +305,11 @@
(BIOS_CNTL_LOCK_ENABLE_MASK|BIOS_CNTL_WRITE_ENABLE_MASK))
== BIOS_CNTL_LOCK_ENABLE_MASK) {
static __initdata /*const*/ char warning[] =
- KERN_WARNING PFX "Firmware space is locked read-only. If you can't or\n"
- KERN_WARNING PFX "don't want to disable this in firmware setup, and if\n"
- KERN_WARNING PFX "you are certain that your system has a functional\n"
- KERN_WARNING PFX "RNG, try using the 'no_fwh_detect' option.\n";
+ KERN_WARNING
+PFX "Firmware space is locked read-only. If you can't or\n"
+PFX "don't want to disable this in firmware setup, and if\n"
+PFX "you are certain that your system has a functional\n"
+PFX "RNG, try using the 'no_fwh_detect' option.\n";
if (no_fwh_detect)
return -ENODEV;
diff --git a/drivers/char/isicom.c b/drivers/char/isicom.c
index 4159292..4f1f4cd 100644
--- a/drivers/char/isicom.c
+++ b/drivers/char/isicom.c
@@ -122,6 +122,7 @@
#include <linux/fs.h>
#include <linux/sched.h>
#include <linux/serial.h>
+#include <linux/smp_lock.h>
#include <linux/mm.h>
#include <linux/interrupt.h>
#include <linux/timer.h>
@@ -1478,10 +1479,10 @@
status = inw(base + 0x4);
if (status != 0) {
dev_warn(&pdev->dev, "Card%d rejected load header:\n"
- KERN_WARNING "Address:0x%x\n"
- KERN_WARNING "Count:0x%x\n"
- KERN_WARNING "Status:0x%x\n",
- index + 1, frame->addr, frame->count, status);
+ "Address:0x%x\n"
+ "Count:0x%x\n"
+ "Status:0x%x\n",
+ index + 1, frame->addr, frame->count, status);
goto errrelfw;
}
outsw(base, frame->data, word_count);
@@ -1526,10 +1527,10 @@
status = inw(base + 0x4);
if (status != 0) {
dev_warn(&pdev->dev, "Card%d rejected verify header:\n"
- KERN_WARNING "Address:0x%x\n"
- KERN_WARNING "Count:0x%x\n"
- KERN_WARNING "Status: 0x%x\n",
- index + 1, frame->addr, frame->count, status);
+ "Address:0x%x\n"
+ "Count:0x%x\n"
+ "Status: 0x%x\n",
+ index + 1, frame->addr, frame->count, status);
goto errrelfw;
}
diff --git a/drivers/char/istallion.c b/drivers/char/istallion.c
index 0c999f5..ab2f334 100644
--- a/drivers/char/istallion.c
+++ b/drivers/char/istallion.c
@@ -20,6 +20,7 @@
#include <linux/module.h>
#include <linux/slab.h>
+#include <linux/smp_lock.h>
#include <linux/interrupt.h>
#include <linux/tty.h>
#include <linux/tty_flip.h>
diff --git a/drivers/char/moxa.c b/drivers/char/moxa.c
index 65b6ff2..dd0083b 100644
--- a/drivers/char/moxa.c
+++ b/drivers/char/moxa.c
@@ -34,6 +34,7 @@
#include <linux/tty.h>
#include <linux/tty_flip.h>
#include <linux/major.h>
+#include <linux/smp_lock.h>
#include <linux/string.h>
#include <linux/fcntl.h>
#include <linux/ptrace.h>
diff --git a/drivers/char/mxser.c b/drivers/char/mxser.c
index 52d953e..dbf8d52 100644
--- a/drivers/char/mxser.c
+++ b/drivers/char/mxser.c
@@ -23,6 +23,7 @@
#include <linux/errno.h>
#include <linux/signal.h>
#include <linux/sched.h>
+#include <linux/smp_lock.h>
#include <linux/timer.h>
#include <linux/interrupt.h>
#include <linux/tty.h>
diff --git a/drivers/char/n_hdlc.c b/drivers/char/n_hdlc.c
index 1c43c8c..c68118e 100644
--- a/drivers/char/n_hdlc.c
+++ b/drivers/char/n_hdlc.c
@@ -97,6 +97,7 @@
#include <linux/slab.h>
#include <linux/tty.h>
#include <linux/errno.h>
+#include <linux/smp_lock.h>
#include <linux/string.h> /* used in new tty drivers */
#include <linux/signal.h> /* used in new tty drivers */
#include <linux/if.h>
diff --git a/drivers/char/n_r3964.c b/drivers/char/n_r3964.c
index 2e99158..6934025 100644
--- a/drivers/char/n_r3964.c
+++ b/drivers/char/n_r3964.c
@@ -58,6 +58,7 @@
#include <linux/ioport.h>
#include <linux/in.h>
#include <linux/slab.h>
+#include <linux/smp_lock.h>
#include <linux/tty.h>
#include <linux/errno.h>
#include <linux/string.h> /* used in new tty drivers */
diff --git a/drivers/char/pty.c b/drivers/char/pty.c
index daebe1b..6e6942c 100644
--- a/drivers/char/pty.c
+++ b/drivers/char/pty.c
@@ -22,6 +22,7 @@
#include <linux/major.h>
#include <linux/mm.h>
#include <linux/init.h>
+#include <linux/smp_lock.h>
#include <linux/sysctl.h>
#include <linux/device.h>
#include <linux/uaccess.h>
@@ -75,114 +76,88 @@
*/
static void pty_unthrottle(struct tty_struct *tty)
{
- struct tty_struct *o_tty = tty->link;
-
- if (!o_tty)
- return;
-
- tty_wakeup(o_tty);
+ tty_wakeup(tty->link);
set_bit(TTY_THROTTLED, &tty->flags);
}
-/*
- * WSH 05/24/97: modified to
- * (1) use space in tty->flip instead of a shared temp buffer
- * The flip buffers aren't being used for a pty, so there's lots
- * of space available. The buffer is protected by a per-pty
- * semaphore that should almost never come under contention.
- * (2) avoid redundant copying for cases where count >> receive_room
- * N.B. Calls from user space may now return an error code instead of
- * a count.
+/**
+ * pty_space - report space left for writing
+ * @to: tty we are writing into
*
- * FIXME: Our pty_write method is called with our ldisc lock held but
- * not our partners. We can't just wait on the other one blindly without
- * risking deadlocks. At some point when everything has settled down we need
- * to look into making pty_write at least able to sleep over an ldisc change.
- *
- * The return on no ldisc is a bit counter intuitive but the logic works
- * like this. During an ldisc change the other end will flush its buffers. We
- * thus return the full length which is identical to the case where we had
- * proper locking and happened to queue the bytes just before the flush during
- * the ldisc change.
+ * The tty buffers allow 64K but we sneak a peak and clip at 8K this
+ * allows a lot of overspill room for echo and other fun messes to
+ * be handled properly
*/
+
+static int pty_space(struct tty_struct *to)
+{
+ int n = 8192 - to->buf.memory_used;
+ if (n < 0)
+ return 0;
+ return n;
+}
+
+/**
+ * pty_write - write to a pty
+ * @tty: the tty we write from
+ * @buf: kernel buffer of data
+ * @count: bytes to write
+ *
+ * Our "hardware" write method. Data is coming from the ldisc which
+ * may be in a non sleeping state. We simply throw this at the other
+ * end of the link as if we were an IRQ handler receiving stuff for
+ * the other side of the pty/tty pair.
+ */
+
static int pty_write(struct tty_struct *tty, const unsigned char *buf,
int count)
{
struct tty_struct *to = tty->link;
- struct tty_ldisc *ld;
- int c = count;
+ int c;
- if (!to || tty->stopped)
+ if (tty->stopped)
return 0;
- ld = tty_ldisc_ref(to);
- if (ld) {
- c = to->receive_room;
- if (c > count)
- c = count;
- ld->ops->receive_buf(to, buf, NULL, c);
- tty_ldisc_deref(ld);
+ /* This isn't locked but our 8K is quite sloppy so no
+ big deal */
+
+ c = pty_space(to);
+ if (c > count)
+ c = count;
+ if (c > 0) {
+ /* Stuff the data into the input queue of the other end */
+ c = tty_insert_flip_string(to, buf, c);
+ /* And shovel */
+ tty_flip_buffer_push(to);
+ tty_wakeup(tty);
}
return c;
}
+/**
+ * pty_write_room - write space
+ * @tty: tty we are writing from
+ *
+ * Report how many bytes the ldisc can send into the queue for
+ * the other device.
+ */
+
static int pty_write_room(struct tty_struct *tty)
{
- struct tty_struct *to = tty->link;
-
- if (!to || tty->stopped)
- return 0;
-
- return to->receive_room;
+ return pty_space(tty->link);
}
-/*
- * WSH 05/24/97: Modified for asymmetric MASTER/SLAVE behavior
- * The chars_in_buffer() value is used by the ldisc select() function
- * to hold off writing when chars_in_buffer > WAKEUP_CHARS (== 256).
- * The pty driver chars_in_buffer() Master/Slave must behave differently:
+/**
+ * pty_chars_in_buffer - characters currently in our tx queue
+ * @tty: our tty
*
- * The Master side needs to allow typed-ahead commands to accumulate
- * while being canonicalized, so we report "our buffer" as empty until
- * some threshold is reached, and then report the count. (Any count >
- * WAKEUP_CHARS is regarded by select() as "full".) To avoid deadlock
- * the count returned must be 0 if no canonical data is available to be
- * read. (The N_TTY ldisc.chars_in_buffer now knows this.)
- *
- * The Slave side passes all characters in raw mode to the Master side's
- * buffer where they can be read immediately, so in this case we can
- * return the true count in the buffer.
+ * Report how much we have in the transmit queue. As everything is
+ * instantly at the other end this is easy to implement.
*/
+
static int pty_chars_in_buffer(struct tty_struct *tty)
{
- struct tty_struct *to = tty->link;
- struct tty_ldisc *ld;
- int count = 0;
-
- /* We should get the line discipline lock for "tty->link" */
- if (!to)
- return 0;
- /* We cannot take a sleeping reference here without deadlocking with
- an ldisc change - but it doesn't really matter */
- ld = tty_ldisc_ref(to);
- if (ld == NULL)
- return 0;
-
- /* The ldisc must report 0 if no characters available to be read */
- if (ld->ops->chars_in_buffer)
- count = ld->ops->chars_in_buffer(to);
-
- tty_ldisc_deref(ld);
-
- if (tty->driver->subtype == PTY_TYPE_SLAVE)
- return count;
-
- /* Master side driver ... if the other side's read buffer is less than
- * half full, return 0 to allow writers to proceed; otherwise return
- * the count. This leaves a comfortable margin to avoid overflow,
- * and still allows half a buffer's worth of typed-ahead commands.
- */
- return (count < N_TTY_BUF_SIZE/2) ? 0 : count;
+ return 0;
}
/* Set the lock flag on a pty */
@@ -202,20 +177,10 @@
{
struct tty_struct *to = tty->link;
unsigned long flags;
- struct tty_ldisc *ld;
if (!to)
return;
- ld = tty_ldisc_ref(to);
-
- /* The other end is changing discipline */
- if (!ld)
- return;
-
- if (ld->ops->flush_buffer)
- to->ldisc->ops->flush_buffer(to);
- tty_ldisc_deref(ld);
-
+ /* tty_buffer_flush(to); FIXME */
if (to->packet) {
spin_lock_irqsave(&tty->ctrl_lock, flags);
tty->ctrl_status |= TIOCPKT_FLUSHWRITE;
diff --git a/drivers/char/rio/rio_linux.c b/drivers/char/rio/rio_linux.c
index ce81da5..d58c2eb 100644
--- a/drivers/char/rio/rio_linux.c
+++ b/drivers/char/rio/rio_linux.c
@@ -44,6 +44,7 @@
#include <linux/delay.h>
#include <linux/pci.h>
#include <linux/slab.h>
+#include <linux/smp_lock.h>
#include <linux/miscdevice.h>
#include <linux/init.h>
diff --git a/drivers/char/riscom8.c b/drivers/char/riscom8.c
index 2176604..171711a 100644
--- a/drivers/char/riscom8.c
+++ b/drivers/char/riscom8.c
@@ -47,6 +47,7 @@
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/tty_flip.h>
+#include <linux/smp_lock.h>
#include <linux/spinlock.h>
#include <linux/device.h>
diff --git a/drivers/char/rocket.c b/drivers/char/rocket.c
index 63d5b62..0e29a23 100644
--- a/drivers/char/rocket.c
+++ b/drivers/char/rocket.c
@@ -73,6 +73,7 @@
#include <linux/tty_driver.h>
#include <linux/tty_flip.h>
#include <linux/serial.h>
+#include <linux/smp_lock.h>
#include <linux/string.h>
#include <linux/fcntl.h>
#include <linux/ptrace.h>
diff --git a/drivers/char/serial167.c b/drivers/char/serial167.c
index f1f24f0..51e7a46 100644
--- a/drivers/char/serial167.c
+++ b/drivers/char/serial167.c
@@ -52,6 +52,7 @@
#include <linux/interrupt.h>
#include <linux/serial.h>
#include <linux/serialP.h>
+#include <linux/smp_lock.h>
#include <linux/string.h>
#include <linux/fcntl.h>
#include <linux/ptrace.h>
diff --git a/drivers/char/specialix.c b/drivers/char/specialix.c
index e72be41..bfe4cdb 100644
--- a/drivers/char/specialix.c
+++ b/drivers/char/specialix.c
@@ -87,6 +87,7 @@
#include <linux/tty_flip.h>
#include <linux/mm.h>
#include <linux/serial.h>
+#include <linux/smp_lock.h>
#include <linux/fcntl.h>
#include <linux/major.h>
#include <linux/delay.h>
diff --git a/drivers/char/sx.c b/drivers/char/sx.c
index 518f2a2..a81ec4f 100644
--- a/drivers/char/sx.c
+++ b/drivers/char/sx.c
@@ -216,6 +216,7 @@
#include <linux/eisa.h>
#include <linux/pci.h>
#include <linux/slab.h>
+#include <linux/smp_lock.h>
#include <linux/init.h>
#include <linux/miscdevice.h>
#include <linux/bitops.h>
diff --git a/drivers/char/synclink.c b/drivers/char/synclink.c
index afded3a..813552f 100644
--- a/drivers/char/synclink.c
+++ b/drivers/char/synclink.c
@@ -81,6 +81,7 @@
#include <linux/mm.h>
#include <linux/seq_file.h>
#include <linux/slab.h>
+#include <linux/smp_lock.h>
#include <linux/delay.h>
#include <linux/netdevice.h>
#include <linux/vmalloc.h>
diff --git a/drivers/char/synclink_gt.c b/drivers/char/synclink_gt.c
index a2e67e6..91f20a9 100644
--- a/drivers/char/synclink_gt.c
+++ b/drivers/char/synclink_gt.c
@@ -62,6 +62,7 @@
#include <linux/mm.h>
#include <linux/seq_file.h>
#include <linux/slab.h>
+#include <linux/smp_lock.h>
#include <linux/netdevice.h>
#include <linux/vmalloc.h>
#include <linux/init.h>
diff --git a/drivers/char/synclinkmp.c b/drivers/char/synclinkmp.c
index 6f727e3..8d4a2a8 100644
--- a/drivers/char/synclinkmp.c
+++ b/drivers/char/synclinkmp.c
@@ -52,6 +52,7 @@
#include <linux/mm.h>
#include <linux/seq_file.h>
#include <linux/slab.h>
+#include <linux/smp_lock.h>
#include <linux/netdevice.h>
#include <linux/vmalloc.h>
#include <linux/init.h>
diff --git a/drivers/char/tb0219.c b/drivers/char/tb0219.c
index 6062b62..b3ec9b1 100644
--- a/drivers/char/tb0219.c
+++ b/drivers/char/tb0219.c
@@ -1,7 +1,7 @@
/*
* Driver for TANBAC TB0219 base board.
*
- * Copyright (C) 2005 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ * Copyright (C) 2005 Yoichi Yuasa <yuasa@linux-mips.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -28,7 +28,7 @@
#include <asm/vr41xx/giu.h>
#include <asm/vr41xx/tb0219.h>
-MODULE_AUTHOR("Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>");
+MODULE_AUTHOR("Yoichi Yuasa <yuasa@linux-mips.org>");
MODULE_DESCRIPTION("TANBAC TB0219 base board driver");
MODULE_LICENSE("GPL");
diff --git a/drivers/char/tpm/tpm.c b/drivers/char/tpm/tpm.c
index ccdd828..b0603b2 100644
--- a/drivers/char/tpm/tpm.c
+++ b/drivers/char/tpm/tpm.c
@@ -26,7 +26,6 @@
#include <linux/poll.h>
#include <linux/mutex.h>
#include <linux/spinlock.h>
-#include <linux/smp_lock.h>
#include "tpm.h"
diff --git a/drivers/char/tty_ioctl.c b/drivers/char/tty_ioctl.c
index b24f6c6..ad6ba4e 100644
--- a/drivers/char/tty_ioctl.c
+++ b/drivers/char/tty_ioctl.c
@@ -21,7 +21,6 @@
#include <linux/module.h>
#include <linux/bitops.h>
#include <linux/mutex.h>
-#include <linux/smp_lock.h>
#include <asm/io.h>
#include <asm/uaccess.h>
diff --git a/drivers/char/tty_ldisc.c b/drivers/char/tty_ldisc.c
index a19e935..0ef0dc9 100644
--- a/drivers/char/tty_ldisc.c
+++ b/drivers/char/tty_ldisc.c
@@ -21,7 +21,6 @@
#include <linux/proc_fs.h>
#include <linux/init.h>
#include <linux/module.h>
-#include <linux/smp_lock.h>
#include <linux/device.h>
#include <linux/wait.h>
#include <linux/bitops.h>
@@ -867,15 +866,22 @@
tty_ldisc_wait_idle(tty);
/*
- * Shutdown the current line discipline, and reset it to N_TTY.
- *
- * FIXME: this MUST get fixed for the new reflocking
+ * Now kill off the ldisc
*/
+ tty_ldisc_close(tty, tty->ldisc);
+ tty_ldisc_put(tty->ldisc);
+ /* Force an oops if we mess this up */
+ tty->ldisc = NULL;
- tty_ldisc_reinit(tty);
+ /* Ensure the next open requests the N_TTY ldisc */
+ tty_set_termios_ldisc(tty, N_TTY);
+
/* This will need doing differently if we need to lock */
if (o_tty)
tty_ldisc_release(o_tty, NULL);
+
+ /* And the memory resources remaining (buffers, termios) will be
+ disposed of when the kref hits zero */
}
/**
diff --git a/drivers/char/vr41xx_giu.c b/drivers/char/vr41xx_giu.c
index 54c8372..e69de29 100644
--- a/drivers/char/vr41xx_giu.c
+++ b/drivers/char/vr41xx_giu.c
@@ -1,680 +0,0 @@
-/*
- * Driver for NEC VR4100 series General-purpose I/O Unit.
- *
- * Copyright (C) 2002 MontaVista Software Inc.
- * Author: Yoichi Yuasa <yyuasa@mvista.com or source@mvista.com>
- * Copyright (C) 2003-2007 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#include <linux/errno.h>
-#include <linux/fs.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/smp_lock.h>
-#include <linux/spinlock.h>
-#include <linux/types.h>
-
-#include <asm/io.h>
-#include <asm/vr41xx/giu.h>
-#include <asm/vr41xx/irq.h>
-#include <asm/vr41xx/vr41xx.h>
-
-MODULE_AUTHOR("Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>");
-MODULE_DESCRIPTION("NEC VR4100 series General-purpose I/O Unit driver");
-MODULE_LICENSE("GPL");
-
-static int major; /* default is dynamic major device number */
-module_param(major, int, 0);
-MODULE_PARM_DESC(major, "Major device number");
-
-#define GIUIOSELL 0x00
-#define GIUIOSELH 0x02
-#define GIUPIODL 0x04
-#define GIUPIODH 0x06
-#define GIUINTSTATL 0x08
-#define GIUINTSTATH 0x0a
-#define GIUINTENL 0x0c
-#define GIUINTENH 0x0e
-#define GIUINTTYPL 0x10
-#define GIUINTTYPH 0x12
-#define GIUINTALSELL 0x14
-#define GIUINTALSELH 0x16
-#define GIUINTHTSELL 0x18
-#define GIUINTHTSELH 0x1a
-#define GIUPODATL 0x1c
-#define GIUPODATEN 0x1c
-#define GIUPODATH 0x1e
- #define PIOEN0 0x0100
- #define PIOEN1 0x0200
-#define GIUPODAT 0x1e
-#define GIUFEDGEINHL 0x20
-#define GIUFEDGEINHH 0x22
-#define GIUREDGEINHL 0x24
-#define GIUREDGEINHH 0x26
-
-#define GIUUSEUPDN 0x1e0
-#define GIUTERMUPDN 0x1e2
-
-#define GPIO_HAS_PULLUPDOWN_IO 0x0001
-#define GPIO_HAS_OUTPUT_ENABLE 0x0002
-#define GPIO_HAS_INTERRUPT_EDGE_SELECT 0x0100
-
-static spinlock_t giu_lock;
-static unsigned long giu_flags;
-static unsigned int giu_nr_pins;
-
-static void __iomem *giu_base;
-
-#define giu_read(offset) readw(giu_base + (offset))
-#define giu_write(offset, value) writew((value), giu_base + (offset))
-
-#define GPIO_PIN_OF_IRQ(irq) ((irq) - GIU_IRQ_BASE)
-#define GIUINT_HIGH_OFFSET 16
-#define GIUINT_HIGH_MAX 32
-
-static inline uint16_t giu_set(uint16_t offset, uint16_t set)
-{
- uint16_t data;
-
- data = giu_read(offset);
- data |= set;
- giu_write(offset, data);
-
- return data;
-}
-
-static inline uint16_t giu_clear(uint16_t offset, uint16_t clear)
-{
- uint16_t data;
-
- data = giu_read(offset);
- data &= ~clear;
- giu_write(offset, data);
-
- return data;
-}
-
-static void ack_giuint_low(unsigned int irq)
-{
- giu_write(GIUINTSTATL, 1 << GPIO_PIN_OF_IRQ(irq));
-}
-
-static void mask_giuint_low(unsigned int irq)
-{
- giu_clear(GIUINTENL, 1 << GPIO_PIN_OF_IRQ(irq));
-}
-
-static void mask_ack_giuint_low(unsigned int irq)
-{
- unsigned int pin;
-
- pin = GPIO_PIN_OF_IRQ(irq);
- giu_clear(GIUINTENL, 1 << pin);
- giu_write(GIUINTSTATL, 1 << pin);
-}
-
-static void unmask_giuint_low(unsigned int irq)
-{
- giu_set(GIUINTENL, 1 << GPIO_PIN_OF_IRQ(irq));
-}
-
-static struct irq_chip giuint_low_irq_chip = {
- .name = "GIUINTL",
- .ack = ack_giuint_low,
- .mask = mask_giuint_low,
- .mask_ack = mask_ack_giuint_low,
- .unmask = unmask_giuint_low,
-};
-
-static void ack_giuint_high(unsigned int irq)
-{
- giu_write(GIUINTSTATH, 1 << (GPIO_PIN_OF_IRQ(irq) - GIUINT_HIGH_OFFSET));
-}
-
-static void mask_giuint_high(unsigned int irq)
-{
- giu_clear(GIUINTENH, 1 << (GPIO_PIN_OF_IRQ(irq) - GIUINT_HIGH_OFFSET));
-}
-
-static void mask_ack_giuint_high(unsigned int irq)
-{
- unsigned int pin;
-
- pin = GPIO_PIN_OF_IRQ(irq) - GIUINT_HIGH_OFFSET;
- giu_clear(GIUINTENH, 1 << pin);
- giu_write(GIUINTSTATH, 1 << pin);
-}
-
-static void unmask_giuint_high(unsigned int irq)
-{
- giu_set(GIUINTENH, 1 << (GPIO_PIN_OF_IRQ(irq) - GIUINT_HIGH_OFFSET));
-}
-
-static struct irq_chip giuint_high_irq_chip = {
- .name = "GIUINTH",
- .ack = ack_giuint_high,
- .mask = mask_giuint_high,
- .mask_ack = mask_ack_giuint_high,
- .unmask = unmask_giuint_high,
-};
-
-static int giu_get_irq(unsigned int irq)
-{
- uint16_t pendl, pendh, maskl, maskh;
- int i;
-
- pendl = giu_read(GIUINTSTATL);
- pendh = giu_read(GIUINTSTATH);
- maskl = giu_read(GIUINTENL);
- maskh = giu_read(GIUINTENH);
-
- maskl &= pendl;
- maskh &= pendh;
-
- if (maskl) {
- for (i = 0; i < 16; i++) {
- if (maskl & (1 << i))
- return GIU_IRQ(i);
- }
- } else if (maskh) {
- for (i = 0; i < 16; i++) {
- if (maskh & (1 << i))
- return GIU_IRQ(i + GIUINT_HIGH_OFFSET);
- }
- }
-
- printk(KERN_ERR "spurious GIU interrupt: %04x(%04x),%04x(%04x)\n",
- maskl, pendl, maskh, pendh);
-
- atomic_inc(&irq_err_count);
-
- return -EINVAL;
-}
-
-void vr41xx_set_irq_trigger(unsigned int pin, irq_trigger_t trigger, irq_signal_t signal)
-{
- uint16_t mask;
-
- if (pin < GIUINT_HIGH_OFFSET) {
- mask = 1 << pin;
- if (trigger != IRQ_TRIGGER_LEVEL) {
- giu_set(GIUINTTYPL, mask);
- if (signal == IRQ_SIGNAL_HOLD)
- giu_set(GIUINTHTSELL, mask);
- else
- giu_clear(GIUINTHTSELL, mask);
- if (giu_flags & GPIO_HAS_INTERRUPT_EDGE_SELECT) {
- switch (trigger) {
- case IRQ_TRIGGER_EDGE_FALLING:
- giu_set(GIUFEDGEINHL, mask);
- giu_clear(GIUREDGEINHL, mask);
- break;
- case IRQ_TRIGGER_EDGE_RISING:
- giu_clear(GIUFEDGEINHL, mask);
- giu_set(GIUREDGEINHL, mask);
- break;
- default:
- giu_set(GIUFEDGEINHL, mask);
- giu_set(GIUREDGEINHL, mask);
- break;
- }
- }
- set_irq_chip_and_handler(GIU_IRQ(pin),
- &giuint_low_irq_chip,
- handle_edge_irq);
- } else {
- giu_clear(GIUINTTYPL, mask);
- giu_clear(GIUINTHTSELL, mask);
- set_irq_chip_and_handler(GIU_IRQ(pin),
- &giuint_low_irq_chip,
- handle_level_irq);
- }
- giu_write(GIUINTSTATL, mask);
- } else if (pin < GIUINT_HIGH_MAX) {
- mask = 1 << (pin - GIUINT_HIGH_OFFSET);
- if (trigger != IRQ_TRIGGER_LEVEL) {
- giu_set(GIUINTTYPH, mask);
- if (signal == IRQ_SIGNAL_HOLD)
- giu_set(GIUINTHTSELH, mask);
- else
- giu_clear(GIUINTHTSELH, mask);
- if (giu_flags & GPIO_HAS_INTERRUPT_EDGE_SELECT) {
- switch (trigger) {
- case IRQ_TRIGGER_EDGE_FALLING:
- giu_set(GIUFEDGEINHH, mask);
- giu_clear(GIUREDGEINHH, mask);
- break;
- case IRQ_TRIGGER_EDGE_RISING:
- giu_clear(GIUFEDGEINHH, mask);
- giu_set(GIUREDGEINHH, mask);
- break;
- default:
- giu_set(GIUFEDGEINHH, mask);
- giu_set(GIUREDGEINHH, mask);
- break;
- }
- }
- set_irq_chip_and_handler(GIU_IRQ(pin),
- &giuint_high_irq_chip,
- handle_edge_irq);
- } else {
- giu_clear(GIUINTTYPH, mask);
- giu_clear(GIUINTHTSELH, mask);
- set_irq_chip_and_handler(GIU_IRQ(pin),
- &giuint_high_irq_chip,
- handle_level_irq);
- }
- giu_write(GIUINTSTATH, mask);
- }
-}
-EXPORT_SYMBOL_GPL(vr41xx_set_irq_trigger);
-
-void vr41xx_set_irq_level(unsigned int pin, irq_level_t level)
-{
- uint16_t mask;
-
- if (pin < GIUINT_HIGH_OFFSET) {
- mask = 1 << pin;
- if (level == IRQ_LEVEL_HIGH)
- giu_set(GIUINTALSELL, mask);
- else
- giu_clear(GIUINTALSELL, mask);
- giu_write(GIUINTSTATL, mask);
- } else if (pin < GIUINT_HIGH_MAX) {
- mask = 1 << (pin - GIUINT_HIGH_OFFSET);
- if (level == IRQ_LEVEL_HIGH)
- giu_set(GIUINTALSELH, mask);
- else
- giu_clear(GIUINTALSELH, mask);
- giu_write(GIUINTSTATH, mask);
- }
-}
-EXPORT_SYMBOL_GPL(vr41xx_set_irq_level);
-
-gpio_data_t vr41xx_gpio_get_pin(unsigned int pin)
-{
- uint16_t reg, mask;
-
- if (pin >= giu_nr_pins)
- return GPIO_DATA_INVAL;
-
- if (pin < 16) {
- reg = giu_read(GIUPIODL);
- mask = (uint16_t)1 << pin;
- } else if (pin < 32) {
- reg = giu_read(GIUPIODH);
- mask = (uint16_t)1 << (pin - 16);
- } else if (pin < 48) {
- reg = giu_read(GIUPODATL);
- mask = (uint16_t)1 << (pin - 32);
- } else {
- reg = giu_read(GIUPODATH);
- mask = (uint16_t)1 << (pin - 48);
- }
-
- if (reg & mask)
- return GPIO_DATA_HIGH;
-
- return GPIO_DATA_LOW;
-}
-EXPORT_SYMBOL_GPL(vr41xx_gpio_get_pin);
-
-int vr41xx_gpio_set_pin(unsigned int pin, gpio_data_t data)
-{
- uint16_t offset, mask, reg;
- unsigned long flags;
-
- if (pin >= giu_nr_pins)
- return -EINVAL;
-
- if (pin < 16) {
- offset = GIUPIODL;
- mask = (uint16_t)1 << pin;
- } else if (pin < 32) {
- offset = GIUPIODH;
- mask = (uint16_t)1 << (pin - 16);
- } else if (pin < 48) {
- offset = GIUPODATL;
- mask = (uint16_t)1 << (pin - 32);
- } else {
- offset = GIUPODATH;
- mask = (uint16_t)1 << (pin - 48);
- }
-
- spin_lock_irqsave(&giu_lock, flags);
-
- reg = giu_read(offset);
- if (data == GPIO_DATA_HIGH)
- reg |= mask;
- else
- reg &= ~mask;
- giu_write(offset, reg);
-
- spin_unlock_irqrestore(&giu_lock, flags);
-
- return 0;
-}
-EXPORT_SYMBOL_GPL(vr41xx_gpio_set_pin);
-
-int vr41xx_gpio_set_direction(unsigned int pin, gpio_direction_t dir)
-{
- uint16_t offset, mask, reg;
- unsigned long flags;
-
- if (pin >= giu_nr_pins)
- return -EINVAL;
-
- if (pin < 16) {
- offset = GIUIOSELL;
- mask = (uint16_t)1 << pin;
- } else if (pin < 32) {
- offset = GIUIOSELH;
- mask = (uint16_t)1 << (pin - 16);
- } else {
- if (giu_flags & GPIO_HAS_OUTPUT_ENABLE) {
- offset = GIUPODATEN;
- mask = (uint16_t)1 << (pin - 32);
- } else {
- switch (pin) {
- case 48:
- offset = GIUPODATH;
- mask = PIOEN0;
- break;
- case 49:
- offset = GIUPODATH;
- mask = PIOEN1;
- break;
- default:
- return -EINVAL;
- }
- }
- }
-
- spin_lock_irqsave(&giu_lock, flags);
-
- reg = giu_read(offset);
- if (dir == GPIO_OUTPUT)
- reg |= mask;
- else
- reg &= ~mask;
- giu_write(offset, reg);
-
- spin_unlock_irqrestore(&giu_lock, flags);
-
- return 0;
-}
-EXPORT_SYMBOL_GPL(vr41xx_gpio_set_direction);
-
-int vr41xx_gpio_pullupdown(unsigned int pin, gpio_pull_t pull)
-{
- uint16_t reg, mask;
- unsigned long flags;
-
- if ((giu_flags & GPIO_HAS_PULLUPDOWN_IO) != GPIO_HAS_PULLUPDOWN_IO)
- return -EPERM;
-
- if (pin >= 15)
- return -EINVAL;
-
- mask = (uint16_t)1 << pin;
-
- spin_lock_irqsave(&giu_lock, flags);
-
- if (pull == GPIO_PULL_UP || pull == GPIO_PULL_DOWN) {
- reg = giu_read(GIUTERMUPDN);
- if (pull == GPIO_PULL_UP)
- reg |= mask;
- else
- reg &= ~mask;
- giu_write(GIUTERMUPDN, reg);
-
- reg = giu_read(GIUUSEUPDN);
- reg |= mask;
- giu_write(GIUUSEUPDN, reg);
- } else {
- reg = giu_read(GIUUSEUPDN);
- reg &= ~mask;
- giu_write(GIUUSEUPDN, reg);
- }
-
- spin_unlock_irqrestore(&giu_lock, flags);
-
- return 0;
-}
-EXPORT_SYMBOL_GPL(vr41xx_gpio_pullupdown);
-
-static ssize_t gpio_read(struct file *file, char __user *buf, size_t len,
- loff_t *ppos)
-{
- unsigned int pin;
- char value = '0';
-
- pin = iminor(file->f_path.dentry->d_inode);
- if (pin >= giu_nr_pins)
- return -EBADF;
-
- if (vr41xx_gpio_get_pin(pin) == GPIO_DATA_HIGH)
- value = '1';
-
- if (len <= 0)
- return -EFAULT;
-
- if (put_user(value, buf))
- return -EFAULT;
-
- return 1;
-}
-
-static ssize_t gpio_write(struct file *file, const char __user *data,
- size_t len, loff_t *ppos)
-{
- unsigned int pin;
- size_t i;
- char c;
- int retval = 0;
-
- pin = iminor(file->f_path.dentry->d_inode);
- if (pin >= giu_nr_pins)
- return -EBADF;
-
- for (i = 0; i < len; i++) {
- if (get_user(c, data + i))
- return -EFAULT;
-
- switch (c) {
- case '0':
- retval = vr41xx_gpio_set_pin(pin, GPIO_DATA_LOW);
- break;
- case '1':
- retval = vr41xx_gpio_set_pin(pin, GPIO_DATA_HIGH);
- break;
- case 'D':
- printk(KERN_INFO "GPIO%d: pull down\n", pin);
- retval = vr41xx_gpio_pullupdown(pin, GPIO_PULL_DOWN);
- break;
- case 'd':
- printk(KERN_INFO "GPIO%d: pull up/down disable\n", pin);
- retval = vr41xx_gpio_pullupdown(pin, GPIO_PULL_DISABLE);
- break;
- case 'I':
- printk(KERN_INFO "GPIO%d: input\n", pin);
- retval = vr41xx_gpio_set_direction(pin, GPIO_INPUT);
- break;
- case 'O':
- printk(KERN_INFO "GPIO%d: output\n", pin);
- retval = vr41xx_gpio_set_direction(pin, GPIO_OUTPUT);
- break;
- case 'o':
- printk(KERN_INFO "GPIO%d: output disable\n", pin);
- retval = vr41xx_gpio_set_direction(pin, GPIO_OUTPUT_DISABLE);
- break;
- case 'P':
- printk(KERN_INFO "GPIO%d: pull up\n", pin);
- retval = vr41xx_gpio_pullupdown(pin, GPIO_PULL_UP);
- break;
- case 'p':
- printk(KERN_INFO "GPIO%d: pull up/down disable\n", pin);
- retval = vr41xx_gpio_pullupdown(pin, GPIO_PULL_DISABLE);
- break;
- default:
- break;
- }
-
- if (retval < 0)
- break;
- }
-
- return i;
-}
-
-static int gpio_open(struct inode *inode, struct file *file)
-{
- unsigned int pin;
-
- cycle_kernel_lock();
- pin = iminor(inode);
- if (pin >= giu_nr_pins)
- return -EBADF;
-
- return nonseekable_open(inode, file);
-}
-
-static int gpio_release(struct inode *inode, struct file *file)
-{
- unsigned int pin;
-
- pin = iminor(inode);
- if (pin >= giu_nr_pins)
- return -EBADF;
-
- return 0;
-}
-
-static const struct file_operations gpio_fops = {
- .owner = THIS_MODULE,
- .read = gpio_read,
- .write = gpio_write,
- .open = gpio_open,
- .release = gpio_release,
-};
-
-static int __devinit giu_probe(struct platform_device *dev)
-{
- struct resource *res;
- unsigned int trigger, i, pin;
- struct irq_chip *chip;
- int irq, retval;
-
- switch (dev->id) {
- case GPIO_50PINS_PULLUPDOWN:
- giu_flags = GPIO_HAS_PULLUPDOWN_IO;
- giu_nr_pins = 50;
- break;
- case GPIO_36PINS:
- giu_nr_pins = 36;
- break;
- case GPIO_48PINS_EDGE_SELECT:
- giu_flags = GPIO_HAS_INTERRUPT_EDGE_SELECT;
- giu_nr_pins = 48;
- break;
- default:
- printk(KERN_ERR "GIU: unknown ID %d\n", dev->id);
- return -ENODEV;
- }
-
- res = platform_get_resource(dev, IORESOURCE_MEM, 0);
- if (!res)
- return -EBUSY;
-
- giu_base = ioremap(res->start, res->end - res->start + 1);
- if (!giu_base)
- return -ENOMEM;
-
- retval = register_chrdev(major, "GIU", &gpio_fops);
- if (retval < 0) {
- iounmap(giu_base);
- giu_base = NULL;
- return retval;
- }
-
- if (major == 0) {
- major = retval;
- printk(KERN_INFO "GIU: major number %d\n", major);
- }
-
- spin_lock_init(&giu_lock);
-
- giu_write(GIUINTENL, 0);
- giu_write(GIUINTENH, 0);
-
- trigger = giu_read(GIUINTTYPH) << 16;
- trigger |= giu_read(GIUINTTYPL);
- for (i = GIU_IRQ_BASE; i <= GIU_IRQ_LAST; i++) {
- pin = GPIO_PIN_OF_IRQ(i);
- if (pin < GIUINT_HIGH_OFFSET)
- chip = &giuint_low_irq_chip;
- else
- chip = &giuint_high_irq_chip;
-
- if (trigger & (1 << pin))
- set_irq_chip_and_handler(i, chip, handle_edge_irq);
- else
- set_irq_chip_and_handler(i, chip, handle_level_irq);
-
- }
-
- irq = platform_get_irq(dev, 0);
- if (irq < 0 || irq >= nr_irqs)
- return -EBUSY;
-
- return cascade_irq(irq, giu_get_irq);
-}
-
-static int __devexit giu_remove(struct platform_device *dev)
-{
- if (giu_base) {
- iounmap(giu_base);
- giu_base = NULL;
- }
-
- return 0;
-}
-
-static struct platform_driver giu_device_driver = {
- .probe = giu_probe,
- .remove = __devexit_p(giu_remove),
- .driver = {
- .name = "GIU",
- .owner = THIS_MODULE,
- },
-};
-
-static int __init vr41xx_giu_init(void)
-{
- return platform_driver_register(&giu_device_driver);
-}
-
-static void __exit vr41xx_giu_exit(void)
-{
- platform_driver_unregister(&giu_device_driver);
-}
-
-module_init(vr41xx_giu_init);
-module_exit(vr41xx_giu_exit);
diff --git a/drivers/char/vt.c b/drivers/char/vt.c
index d9113b4..7947bd1 100644
--- a/drivers/char/vt.c
+++ b/drivers/char/vt.c
@@ -89,6 +89,7 @@
#include <linux/mutex.h>
#include <linux/vt_kern.h>
#include <linux/selection.h>
+#include <linux/smp_lock.h>
#include <linux/tiocl.h>
#include <linux/kbd_kern.h>
#include <linux/consolemap.h>
diff --git a/drivers/char/vt_ioctl.c b/drivers/char/vt_ioctl.c
index 7539bed..95189f2 100644
--- a/drivers/char/vt_ioctl.c
+++ b/drivers/char/vt_ioctl.c
@@ -25,6 +25,7 @@
#include <linux/console.h>
#include <linux/consolemap.h>
#include <linux/signal.h>
+#include <linux/smp_lock.h>
#include <linux/timex.h>
#include <asm/io.h>
diff --git a/drivers/clocksource/sh_tmu.c b/drivers/clocksource/sh_tmu.c
index 9ffb05f..93c2322 100644
--- a/drivers/clocksource/sh_tmu.c
+++ b/drivers/clocksource/sh_tmu.c
@@ -161,7 +161,7 @@
if (periodic)
sh_tmu_write(p, TCOR, delta);
else
- sh_tmu_write(p, TCOR, 0);
+ sh_tmu_write(p, TCOR, 0xffffffff);
sh_tmu_write(p, TCNT, delta);
diff --git a/drivers/cpufreq/cpufreq.c b/drivers/cpufreq/cpufreq.c
index 6e2ec0b..b90eda8 100644
--- a/drivers/cpufreq/cpufreq.c
+++ b/drivers/cpufreq/cpufreq.c
@@ -761,6 +761,10 @@
* cpufreq_add_dev - add a CPU device
*
* Adds the cpufreq interface for a CPU device.
+ *
+ * The Oracle says: try running cpufreq registration/unregistration concurrently
+ * with with cpu hotplugging and all hell will break loose. Tried to clean this
+ * mess up, but more thorough testing is needed. - Mathieu
*/
static int cpufreq_add_dev(struct sys_device *sys_dev)
{
@@ -772,9 +776,6 @@
struct sys_device *cpu_sys_dev;
unsigned long flags;
unsigned int j;
-#ifdef CONFIG_SMP
- struct cpufreq_policy *managed_policy;
-#endif
if (cpu_is_offline(cpu))
return 0;
@@ -804,15 +805,12 @@
goto nomem_out;
}
if (!alloc_cpumask_var(&policy->cpus, GFP_KERNEL)) {
- kfree(policy);
ret = -ENOMEM;
- goto nomem_out;
+ goto err_free_policy;
}
if (!zalloc_cpumask_var(&policy->related_cpus, GFP_KERNEL)) {
- free_cpumask_var(policy->cpus);
- kfree(policy);
ret = -ENOMEM;
- goto nomem_out;
+ goto err_free_cpumask;
}
policy->cpu = cpu;
@@ -820,7 +818,8 @@
/* Initially set CPU itself as the policy_cpu */
per_cpu(policy_cpu, cpu) = cpu;
- lock_policy_rwsem_write(cpu);
+ ret = (lock_policy_rwsem_write(cpu) < 0);
+ WARN_ON(ret);
init_completion(&policy->kobj_unregister);
INIT_WORK(&policy->update, handle_update);
@@ -833,7 +832,7 @@
ret = cpufreq_driver->init(policy);
if (ret) {
dprintk("initialization failed\n");
- goto err_out;
+ goto err_unlock_policy;
}
policy->user_policy.min = policy->min;
policy->user_policy.max = policy->max;
@@ -852,21 +851,29 @@
#endif
for_each_cpu(j, policy->cpus) {
+ struct cpufreq_policy *managed_policy;
+
if (cpu == j)
continue;
/* Check for existing affected CPUs.
* They may not be aware of it due to CPU Hotplug.
*/
- managed_policy = cpufreq_cpu_get(j); /* FIXME: Where is this released? What about error paths? */
+ managed_policy = cpufreq_cpu_get(j);
if (unlikely(managed_policy)) {
/* Set proper policy_cpu */
unlock_policy_rwsem_write(cpu);
per_cpu(policy_cpu, cpu) = managed_policy->cpu;
- if (lock_policy_rwsem_write(cpu) < 0)
- goto err_out_driver_exit;
+ if (lock_policy_rwsem_write(cpu) < 0) {
+ /* Should not go through policy unlock path */
+ if (cpufreq_driver->exit)
+ cpufreq_driver->exit(policy);
+ ret = -EBUSY;
+ cpufreq_cpu_put(managed_policy);
+ goto err_free_cpumask;
+ }
spin_lock_irqsave(&cpufreq_driver_lock, flags);
cpumask_copy(managed_policy->cpus, policy->cpus);
@@ -877,12 +884,14 @@
ret = sysfs_create_link(&sys_dev->kobj,
&managed_policy->kobj,
"cpufreq");
- if (ret)
- goto err_out_driver_exit;
-
- cpufreq_debug_enable_ratelimit();
- ret = 0;
- goto err_out_driver_exit; /* call driver->exit() */
+ if (!ret)
+ cpufreq_cpu_put(managed_policy);
+ /*
+ * Success. We only needed to be added to the mask.
+ * Call driver->exit() because only the cpu parent of
+ * the kobj needed to call init().
+ */
+ goto out_driver_exit; /* call driver->exit() */
}
}
#endif
@@ -892,25 +901,25 @@
ret = kobject_init_and_add(&policy->kobj, &ktype_cpufreq, &sys_dev->kobj,
"cpufreq");
if (ret)
- goto err_out_driver_exit;
+ goto out_driver_exit;
/* set up files for this cpu device */
drv_attr = cpufreq_driver->attr;
while ((drv_attr) && (*drv_attr)) {
ret = sysfs_create_file(&policy->kobj, &((*drv_attr)->attr));
if (ret)
- goto err_out_driver_exit;
+ goto err_out_kobj_put;
drv_attr++;
}
if (cpufreq_driver->get) {
ret = sysfs_create_file(&policy->kobj, &cpuinfo_cur_freq.attr);
if (ret)
- goto err_out_driver_exit;
+ goto err_out_kobj_put;
}
if (cpufreq_driver->target) {
ret = sysfs_create_file(&policy->kobj, &scaling_cur_freq.attr);
if (ret)
- goto err_out_driver_exit;
+ goto err_out_kobj_put;
}
spin_lock_irqsave(&cpufreq_driver_lock, flags);
@@ -922,18 +931,22 @@
/* symlink affected CPUs */
for_each_cpu(j, policy->cpus) {
+ struct cpufreq_policy *managed_policy;
+
if (j == cpu)
continue;
if (!cpu_online(j))
continue;
dprintk("CPU %u already managed, adding link\n", j);
- cpufreq_cpu_get(cpu);
+ managed_policy = cpufreq_cpu_get(cpu);
cpu_sys_dev = get_cpu_sysdev(j);
ret = sysfs_create_link(&cpu_sys_dev->kobj, &policy->kobj,
"cpufreq");
- if (ret)
+ if (ret) {
+ cpufreq_cpu_put(managed_policy);
goto err_out_unregister;
+ }
}
policy->governor = NULL; /* to assure that the starting sequence is
@@ -965,17 +978,20 @@
per_cpu(cpufreq_cpu_data, j) = NULL;
spin_unlock_irqrestore(&cpufreq_driver_lock, flags);
+err_out_kobj_put:
kobject_put(&policy->kobj);
wait_for_completion(&policy->kobj_unregister);
-err_out_driver_exit:
+out_driver_exit:
if (cpufreq_driver->exit)
cpufreq_driver->exit(policy);
-err_out:
+err_unlock_policy:
unlock_policy_rwsem_write(cpu);
+err_free_cpumask:
+ free_cpumask_var(policy->cpus);
+err_free_policy:
kfree(policy);
-
nomem_out:
module_put(cpufreq_driver->owner);
module_out:
@@ -1070,8 +1086,6 @@
spin_unlock_irqrestore(&cpufreq_driver_lock, flags);
#endif
- unlock_policy_rwsem_write(cpu);
-
if (cpufreq_driver->target)
__cpufreq_governor(data, CPUFREQ_GOV_STOP);
@@ -1088,6 +1102,8 @@
if (cpufreq_driver->exit)
cpufreq_driver->exit(data);
+ unlock_policy_rwsem_write(cpu);
+
free_cpumask_var(data->related_cpus);
free_cpumask_var(data->cpus);
kfree(data);
diff --git a/drivers/cpufreq/cpufreq_conservative.c b/drivers/cpufreq/cpufreq_conservative.c
index 7fc58af..5749050 100644
--- a/drivers/cpufreq/cpufreq_conservative.c
+++ b/drivers/cpufreq/cpufreq_conservative.c
@@ -63,22 +63,20 @@
unsigned int down_skip;
unsigned int requested_freq;
int cpu;
- unsigned int enable:1;
+ /*
+ * percpu mutex that serializes governor limit change with
+ * do_dbs_timer invocation. We do not want do_dbs_timer to run
+ * when user is changing the governor or limits.
+ */
+ struct mutex timer_mutex;
};
static DEFINE_PER_CPU(struct cpu_dbs_info_s, cpu_dbs_info);
static unsigned int dbs_enable; /* number of CPUs using this policy */
/*
- * DEADLOCK ALERT! There is a ordering requirement between cpu_hotplug
- * lock and dbs_mutex. cpu_hotplug lock should always be held before
- * dbs_mutex. If any function that can potentially take cpu_hotplug lock
- * (like __cpufreq_driver_target()) is being called with dbs_mutex taken, then
- * cpu_hotplug lock should be taken before that. Note that cpu_hotplug lock
- * is recursive for the same process. -Venki
- * DEADLOCK ALERT! (2) : do_dbs_timer() must not take the dbs_mutex, because it
- * would deadlock with cancel_delayed_work_sync(), which is needed for proper
- * raceless workqueue teardown.
+ * dbs_mutex protects data in dbs_tuners_ins from concurrent changes on
+ * different CPUs. It protects dbs_enable in governor start/stop.
*/
static DEFINE_MUTEX(dbs_mutex);
@@ -143,9 +141,6 @@
struct cpufreq_policy *policy;
- if (!this_dbs_info->enable)
- return 0;
-
policy = this_dbs_info->cur_policy;
/*
@@ -488,18 +483,12 @@
delay -= jiffies % delay;
- if (lock_policy_rwsem_write(cpu) < 0)
- return;
-
- if (!dbs_info->enable) {
- unlock_policy_rwsem_write(cpu);
- return;
- }
+ mutex_lock(&dbs_info->timer_mutex);
dbs_check_cpu(dbs_info);
queue_delayed_work_on(cpu, kconservative_wq, &dbs_info->work, delay);
- unlock_policy_rwsem_write(cpu);
+ mutex_unlock(&dbs_info->timer_mutex);
}
static inline void dbs_timer_init(struct cpu_dbs_info_s *dbs_info)
@@ -508,7 +497,6 @@
int delay = usecs_to_jiffies(dbs_tuners_ins.sampling_rate);
delay -= jiffies % delay;
- dbs_info->enable = 1;
INIT_DELAYED_WORK_DEFERRABLE(&dbs_info->work, do_dbs_timer);
queue_delayed_work_on(dbs_info->cpu, kconservative_wq, &dbs_info->work,
delay);
@@ -516,7 +504,6 @@
static inline void dbs_timer_exit(struct cpu_dbs_info_s *dbs_info)
{
- dbs_info->enable = 0;
cancel_delayed_work_sync(&dbs_info->work);
}
@@ -535,9 +522,6 @@
if ((!cpu_online(cpu)) || (!policy->cur))
return -EINVAL;
- if (this_dbs_info->enable) /* Already enabled */
- break;
-
mutex_lock(&dbs_mutex);
rc = sysfs_create_group(&policy->kobj, &dbs_attr_group);
@@ -561,6 +545,7 @@
this_dbs_info->down_skip = 0;
this_dbs_info->requested_freq = policy->cur;
+ mutex_init(&this_dbs_info->timer_mutex);
dbs_enable++;
/*
* Start the timerschedule work, when this governor
@@ -590,17 +575,19 @@
&dbs_cpufreq_notifier_block,
CPUFREQ_TRANSITION_NOTIFIER);
}
- dbs_timer_init(this_dbs_info);
-
mutex_unlock(&dbs_mutex);
+ dbs_timer_init(this_dbs_info);
+
break;
case CPUFREQ_GOV_STOP:
- mutex_lock(&dbs_mutex);
dbs_timer_exit(this_dbs_info);
+
+ mutex_lock(&dbs_mutex);
sysfs_remove_group(&policy->kobj, &dbs_attr_group);
dbs_enable--;
+ mutex_destroy(&this_dbs_info->timer_mutex);
/*
* Stop the timerschedule work, when this governor
@@ -616,7 +603,7 @@
break;
case CPUFREQ_GOV_LIMITS:
- mutex_lock(&dbs_mutex);
+ mutex_lock(&this_dbs_info->timer_mutex);
if (policy->max < this_dbs_info->cur_policy->cur)
__cpufreq_driver_target(
this_dbs_info->cur_policy,
@@ -625,7 +612,7 @@
__cpufreq_driver_target(
this_dbs_info->cur_policy,
policy->min, CPUFREQ_RELATION_L);
- mutex_unlock(&dbs_mutex);
+ mutex_unlock(&this_dbs_info->timer_mutex);
break;
}
diff --git a/drivers/cpufreq/cpufreq_ondemand.c b/drivers/cpufreq/cpufreq_ondemand.c
index 1911d17..d6ba142 100644
--- a/drivers/cpufreq/cpufreq_ondemand.c
+++ b/drivers/cpufreq/cpufreq_ondemand.c
@@ -70,23 +70,21 @@
unsigned int freq_lo_jiffies;
unsigned int freq_hi_jiffies;
int cpu;
- unsigned int enable:1,
- sample_type:1;
+ unsigned int sample_type:1;
+ /*
+ * percpu mutex that serializes governor limit change with
+ * do_dbs_timer invocation. We do not want do_dbs_timer to run
+ * when user is changing the governor or limits.
+ */
+ struct mutex timer_mutex;
};
static DEFINE_PER_CPU(struct cpu_dbs_info_s, cpu_dbs_info);
static unsigned int dbs_enable; /* number of CPUs using this policy */
/*
- * DEADLOCK ALERT! There is a ordering requirement between cpu_hotplug
- * lock and dbs_mutex. cpu_hotplug lock should always be held before
- * dbs_mutex. If any function that can potentially take cpu_hotplug lock
- * (like __cpufreq_driver_target()) is being called with dbs_mutex taken, then
- * cpu_hotplug lock should be taken before that. Note that cpu_hotplug lock
- * is recursive for the same process. -Venki
- * DEADLOCK ALERT! (2) : do_dbs_timer() must not take the dbs_mutex, because it
- * would deadlock with cancel_delayed_work_sync(), which is needed for proper
- * raceless workqueue teardown.
+ * dbs_mutex protects data in dbs_tuners_ins from concurrent changes on
+ * different CPUs. It protects dbs_enable in governor start/stop.
*/
static DEFINE_MUTEX(dbs_mutex);
@@ -192,13 +190,18 @@
return freq_hi;
}
+static void ondemand_powersave_bias_init_cpu(int cpu)
+{
+ struct cpu_dbs_info_s *dbs_info = &per_cpu(cpu_dbs_info, cpu);
+ dbs_info->freq_table = cpufreq_frequency_get_table(cpu);
+ dbs_info->freq_lo = 0;
+}
+
static void ondemand_powersave_bias_init(void)
{
int i;
for_each_online_cpu(i) {
- struct cpu_dbs_info_s *dbs_info = &per_cpu(cpu_dbs_info, i);
- dbs_info->freq_table = cpufreq_frequency_get_table(i);
- dbs_info->freq_lo = 0;
+ ondemand_powersave_bias_init_cpu(i);
}
}
@@ -240,12 +243,10 @@
unsigned int input;
int ret;
ret = sscanf(buf, "%u", &input);
+ if (ret != 1)
+ return -EINVAL;
mutex_lock(&dbs_mutex);
- if (ret != 1) {
- mutex_unlock(&dbs_mutex);
- return -EINVAL;
- }
dbs_tuners_ins.sampling_rate = max(input, min_sampling_rate);
mutex_unlock(&dbs_mutex);
@@ -259,13 +260,12 @@
int ret;
ret = sscanf(buf, "%u", &input);
- mutex_lock(&dbs_mutex);
if (ret != 1 || input > MAX_FREQUENCY_UP_THRESHOLD ||
input < MIN_FREQUENCY_UP_THRESHOLD) {
- mutex_unlock(&dbs_mutex);
return -EINVAL;
}
+ mutex_lock(&dbs_mutex);
dbs_tuners_ins.up_threshold = input;
mutex_unlock(&dbs_mutex);
@@ -363,9 +363,6 @@
struct cpufreq_policy *policy;
unsigned int j;
- if (!this_dbs_info->enable)
- return;
-
this_dbs_info->freq_lo = 0;
policy = this_dbs_info->cur_policy;
@@ -493,14 +490,7 @@
int delay = usecs_to_jiffies(dbs_tuners_ins.sampling_rate);
delay -= jiffies % delay;
-
- if (lock_policy_rwsem_write(cpu) < 0)
- return;
-
- if (!dbs_info->enable) {
- unlock_policy_rwsem_write(cpu);
- return;
- }
+ mutex_lock(&dbs_info->timer_mutex);
/* Common NORMAL_SAMPLE setup */
dbs_info->sample_type = DBS_NORMAL_SAMPLE;
@@ -517,7 +507,7 @@
dbs_info->freq_lo, CPUFREQ_RELATION_H);
}
queue_delayed_work_on(cpu, kondemand_wq, &dbs_info->work, delay);
- unlock_policy_rwsem_write(cpu);
+ mutex_unlock(&dbs_info->timer_mutex);
}
static inline void dbs_timer_init(struct cpu_dbs_info_s *dbs_info)
@@ -526,8 +516,6 @@
int delay = usecs_to_jiffies(dbs_tuners_ins.sampling_rate);
delay -= jiffies % delay;
- dbs_info->enable = 1;
- ondemand_powersave_bias_init();
dbs_info->sample_type = DBS_NORMAL_SAMPLE;
INIT_DELAYED_WORK_DEFERRABLE(&dbs_info->work, do_dbs_timer);
queue_delayed_work_on(dbs_info->cpu, kondemand_wq, &dbs_info->work,
@@ -536,7 +524,6 @@
static inline void dbs_timer_exit(struct cpu_dbs_info_s *dbs_info)
{
- dbs_info->enable = 0;
cancel_delayed_work_sync(&dbs_info->work);
}
@@ -555,19 +542,15 @@
if ((!cpu_online(cpu)) || (!policy->cur))
return -EINVAL;
- if (this_dbs_info->enable) /* Already enabled */
- break;
-
mutex_lock(&dbs_mutex);
- dbs_enable++;
rc = sysfs_create_group(&policy->kobj, &dbs_attr_group);
if (rc) {
- dbs_enable--;
mutex_unlock(&dbs_mutex);
return rc;
}
+ dbs_enable++;
for_each_cpu(j, policy->cpus) {
struct cpu_dbs_info_s *j_dbs_info;
j_dbs_info = &per_cpu(cpu_dbs_info, j);
@@ -581,6 +564,8 @@
}
}
this_dbs_info->cpu = cpu;
+ ondemand_powersave_bias_init_cpu(cpu);
+ mutex_init(&this_dbs_info->timer_mutex);
/*
* Start the timerschedule work, when this governor
* is used for first time
@@ -598,29 +583,31 @@
max(min_sampling_rate,
latency * LATENCY_MULTIPLIER);
}
- dbs_timer_init(this_dbs_info);
-
mutex_unlock(&dbs_mutex);
+
+ dbs_timer_init(this_dbs_info);
break;
case CPUFREQ_GOV_STOP:
- mutex_lock(&dbs_mutex);
dbs_timer_exit(this_dbs_info);
+
+ mutex_lock(&dbs_mutex);
sysfs_remove_group(&policy->kobj, &dbs_attr_group);
+ mutex_destroy(&this_dbs_info->timer_mutex);
dbs_enable--;
mutex_unlock(&dbs_mutex);
break;
case CPUFREQ_GOV_LIMITS:
- mutex_lock(&dbs_mutex);
+ mutex_lock(&this_dbs_info->timer_mutex);
if (policy->max < this_dbs_info->cur_policy->cur)
__cpufreq_driver_target(this_dbs_info->cur_policy,
policy->max, CPUFREQ_RELATION_H);
else if (policy->min > this_dbs_info->cur_policy->cur)
__cpufreq_driver_target(this_dbs_info->cur_policy,
policy->min, CPUFREQ_RELATION_L);
- mutex_unlock(&dbs_mutex);
+ mutex_unlock(&this_dbs_info->timer_mutex);
break;
}
return 0;
diff --git a/drivers/edac/amd64_edac.c b/drivers/edac/amd64_edac.c
index c36bf40..858fe60 100644
--- a/drivers/edac/amd64_edac.c
+++ b/drivers/edac/amd64_edac.c
@@ -754,13 +754,13 @@
static enum edac_type amd64_determine_edac_cap(struct amd64_pvt *pvt)
{
int bit;
- enum dev_type edac_cap = EDAC_NONE;
+ enum dev_type edac_cap = EDAC_FLAG_NONE;
bit = (boot_cpu_data.x86 > 0xf || pvt->ext_model >= OPTERON_CPU_REV_F)
? 19
: 17;
- if (pvt->dclr0 >> BIT(bit))
+ if (pvt->dclr0 & BIT(bit))
edac_cap = EDAC_FLAG_SECDED;
return edac_cap;
@@ -1269,7 +1269,7 @@
if (channels == 0)
channels = 1;
- debugf0("DIMM count= %d\n", channels);
+ debugf0("MCT channel count: %d\n", channels);
return channels;
@@ -2966,7 +2966,12 @@
" Use of the override can cause "
"unknown side effects.\n");
ret = -ENODEV;
- }
+ } else
+ /*
+ * enable further driver loading if ECC enable is
+ * overridden.
+ */
+ ret = 0;
} else {
amd64_printk(KERN_INFO,
"ECC is enabled by BIOS, Proceeding "
@@ -3006,7 +3011,6 @@
mci->mtype_cap = MEM_FLAG_DDR2 | MEM_FLAG_RDDR2;
mci->edac_ctl_cap = EDAC_FLAG_NONE;
- mci->edac_cap = EDAC_FLAG_NONE;
if (pvt->nbcap & K8_NBCAP_SECDED)
mci->edac_ctl_cap |= EDAC_FLAG_SECDED;
@@ -3052,7 +3056,7 @@
if (!pvt)
goto err_exit;
- pvt->mc_node_id = get_mc_node_id_from_pdev(dram_f2_ctl);
+ pvt->mc_node_id = get_node_id(dram_f2_ctl);
pvt->dram_f2_ctl = dram_f2_ctl;
pvt->ext_model = boot_cpu_data.x86_model >> 4;
@@ -3179,8 +3183,7 @@
{
int ret = 0;
- debugf0("(MC node=%d,mc_type='%s')\n",
- get_mc_node_id_from_pdev(pdev),
+ debugf0("(MC node=%d,mc_type='%s')\n", get_node_id(pdev),
get_amd_family_name(mc_type->driver_data));
ret = pci_enable_device(pdev);
@@ -3319,15 +3322,17 @@
err = amd64_init_2nd_stage(pvt_lookup[nb]);
if (err)
- goto err_exit;
+ goto err_2nd_stage;
}
amd64_setup_pci_device();
return 0;
+err_2nd_stage:
+ debugf0("2nd stage failed\n");
+
err_exit:
- debugf0("'finish_setup' stage failed\n");
pci_unregister_driver(&amd64_pci_driver);
return err;
diff --git a/drivers/edac/amd64_edac.h b/drivers/edac/amd64_edac.h
index a159957..ba73015 100644
--- a/drivers/edac/amd64_edac.h
+++ b/drivers/edac/amd64_edac.h
@@ -444,7 +444,7 @@
#define K8_MSR_MC4ADDR 0x0412
/* AMD sets the first MC device at device ID 0x18. */
-static inline int get_mc_node_id_from_pdev(struct pci_dev *pdev)
+static inline int get_node_id(struct pci_dev *pdev)
{
return PCI_SLOT(pdev->devfn) - 0x18;
}
diff --git a/drivers/edac/edac_core.h b/drivers/edac/edac_core.h
index 3493c6b..871c13b 100644
--- a/drivers/edac/edac_core.h
+++ b/drivers/edac/edac_core.h
@@ -150,6 +150,8 @@
MEM_FB_DDR2, /* fully buffered DDR2 */
MEM_RDDR2, /* Registered DDR2 RAM */
MEM_XDR, /* Rambus XDR */
+ MEM_DDR3, /* DDR3 RAM */
+ MEM_RDDR3, /* Registered DDR3 RAM */
};
#define MEM_FLAG_EMPTY BIT(MEM_EMPTY)
@@ -167,6 +169,8 @@
#define MEM_FLAG_FB_DDR2 BIT(MEM_FB_DDR2)
#define MEM_FLAG_RDDR2 BIT(MEM_RDDR2)
#define MEM_FLAG_XDR BIT(MEM_XDR)
+#define MEM_FLAG_DDR3 BIT(MEM_DDR3)
+#define MEM_FLAG_RDDR3 BIT(MEM_RDDR3)
/* chipset Error Detection and Correction capabilities and mode */
enum edac_type {
diff --git a/drivers/edac/edac_mc_sysfs.c b/drivers/edac/edac_mc_sysfs.c
index ad218fe..e1d4ce0 100644
--- a/drivers/edac/edac_mc_sysfs.c
+++ b/drivers/edac/edac_mc_sysfs.c
@@ -94,7 +94,9 @@
[MEM_DDR2] = "Unbuffered-DDR2",
[MEM_FB_DDR2] = "FullyBuffered-DDR2",
[MEM_RDDR2] = "Registered-DDR2",
- [MEM_XDR] = "XDR"
+ [MEM_XDR] = "XDR",
+ [MEM_DDR3] = "Unbuffered-DDR3",
+ [MEM_RDDR3] = "Registered-DDR3"
};
static const char *dev_types[] = {
diff --git a/drivers/edac/mpc85xx_edac.c b/drivers/edac/mpc85xx_edac.c
index 7c8c2d7..3f2ccfc 100644
--- a/drivers/edac/mpc85xx_edac.c
+++ b/drivers/edac/mpc85xx_edac.c
@@ -757,6 +757,9 @@
case DSC_SDTYPE_DDR2:
mtype = MEM_RDDR2;
break;
+ case DSC_SDTYPE_DDR3:
+ mtype = MEM_RDDR3;
+ break;
default:
mtype = MEM_UNKNOWN;
break;
@@ -769,6 +772,9 @@
case DSC_SDTYPE_DDR2:
mtype = MEM_DDR2;
break;
+ case DSC_SDTYPE_DDR3:
+ mtype = MEM_DDR3;
+ break;
default:
mtype = MEM_UNKNOWN;
break;
diff --git a/drivers/edac/mpc85xx_edac.h b/drivers/edac/mpc85xx_edac.h
index 135b353..52432ee 100644
--- a/drivers/edac/mpc85xx_edac.h
+++ b/drivers/edac/mpc85xx_edac.h
@@ -53,6 +53,7 @@
#define DSC_SDTYPE_DDR 0x02000000
#define DSC_SDTYPE_DDR2 0x03000000
+#define DSC_SDTYPE_DDR3 0x07000000
#define DSC_X32_EN 0x00000020
/* Err_Int_En */
diff --git a/drivers/firewire/core-card.c b/drivers/firewire/core-card.c
index 543fcca..f74edae 100644
--- a/drivers/firewire/core-card.c
+++ b/drivers/firewire/core-card.c
@@ -196,8 +196,8 @@
{
int channel, bandwidth = 0;
- fw_iso_resource_manage(card, generation, 1ULL << 31,
- &channel, &bandwidth, true);
+ fw_iso_resource_manage(card, generation, 1ULL << 31, &channel,
+ &bandwidth, true, card->bm_transaction_data);
if (channel == 31) {
card->broadcast_channel_allocated = true;
device_for_each_child(card->device, (void *)(long)generation,
@@ -230,7 +230,6 @@
bool do_reset = false;
bool root_device_is_running;
bool root_device_is_cmc;
- __be32 lock_data[2];
spin_lock_irqsave(&card->lock, flags);
@@ -273,22 +272,23 @@
goto pick_me;
}
- lock_data[0] = cpu_to_be32(0x3f);
- lock_data[1] = cpu_to_be32(local_id);
+ card->bm_transaction_data[0] = cpu_to_be32(0x3f);
+ card->bm_transaction_data[1] = cpu_to_be32(local_id);
spin_unlock_irqrestore(&card->lock, flags);
rcode = fw_run_transaction(card, TCODE_LOCK_COMPARE_SWAP,
irm_id, generation, SCODE_100,
CSR_REGISTER_BASE + CSR_BUS_MANAGER_ID,
- lock_data, sizeof(lock_data));
+ card->bm_transaction_data,
+ sizeof(card->bm_transaction_data));
if (rcode == RCODE_GENERATION)
/* Another bus reset, BM work has been rescheduled. */
goto out;
if (rcode == RCODE_COMPLETE &&
- lock_data[0] != cpu_to_be32(0x3f)) {
+ card->bm_transaction_data[0] != cpu_to_be32(0x3f)) {
/* Somebody else is BM. Only act as IRM. */
if (local_id == irm_id)
diff --git a/drivers/firewire/core-cdev.c b/drivers/firewire/core-cdev.c
index d1d30c6..ced186d 100644
--- a/drivers/firewire/core-cdev.c
+++ b/drivers/firewire/core-cdev.c
@@ -125,6 +125,7 @@
int generation;
u64 channels;
s32 bandwidth;
+ __be32 transaction_data[2];
struct iso_resource_event *e_alloc, *e_dealloc;
};
@@ -1049,7 +1050,8 @@
r->channels, &channel, &bandwidth,
todo == ISO_RES_ALLOC ||
todo == ISO_RES_REALLOC ||
- todo == ISO_RES_ALLOC_ONCE);
+ todo == ISO_RES_ALLOC_ONCE,
+ r->transaction_data);
/*
* Is this generation outdated already? As long as this resource sticks
* in the idr, it will be scheduled again for a newer generation or at
diff --git a/drivers/firewire/core-iso.c b/drivers/firewire/core-iso.c
index 166f19c..110e731 100644
--- a/drivers/firewire/core-iso.c
+++ b/drivers/firewire/core-iso.c
@@ -177,9 +177,8 @@
*/
static int manage_bandwidth(struct fw_card *card, int irm_id, int generation,
- int bandwidth, bool allocate)
+ int bandwidth, bool allocate, __be32 data[2])
{
- __be32 data[2];
int try, new, old = allocate ? BANDWIDTH_AVAILABLE_INITIAL : 0;
/*
@@ -215,9 +214,9 @@
}
static int manage_channel(struct fw_card *card, int irm_id, int generation,
- u32 channels_mask, u64 offset, bool allocate)
+ u32 channels_mask, u64 offset, bool allocate, __be32 data[2])
{
- __be32 data[2], c, all, old;
+ __be32 c, all, old;
int i, retry = 5;
old = all = allocate ? cpu_to_be32(~0) : 0;
@@ -260,7 +259,7 @@
}
static void deallocate_channel(struct fw_card *card, int irm_id,
- int generation, int channel)
+ int generation, int channel, __be32 buffer[2])
{
u32 mask;
u64 offset;
@@ -269,7 +268,7 @@
offset = channel < 32 ? CSR_REGISTER_BASE + CSR_CHANNELS_AVAILABLE_HI :
CSR_REGISTER_BASE + CSR_CHANNELS_AVAILABLE_LO;
- manage_channel(card, irm_id, generation, mask, offset, false);
+ manage_channel(card, irm_id, generation, mask, offset, false, buffer);
}
/**
@@ -298,7 +297,7 @@
*/
void fw_iso_resource_manage(struct fw_card *card, int generation,
u64 channels_mask, int *channel, int *bandwidth,
- bool allocate)
+ bool allocate, __be32 buffer[2])
{
u32 channels_hi = channels_mask; /* channels 31...0 */
u32 channels_lo = channels_mask >> 32; /* channels 63...32 */
@@ -310,10 +309,12 @@
if (channels_hi)
c = manage_channel(card, irm_id, generation, channels_hi,
- CSR_REGISTER_BASE + CSR_CHANNELS_AVAILABLE_HI, allocate);
+ CSR_REGISTER_BASE + CSR_CHANNELS_AVAILABLE_HI,
+ allocate, buffer);
if (channels_lo && c < 0) {
c = manage_channel(card, irm_id, generation, channels_lo,
- CSR_REGISTER_BASE + CSR_CHANNELS_AVAILABLE_LO, allocate);
+ CSR_REGISTER_BASE + CSR_CHANNELS_AVAILABLE_LO,
+ allocate, buffer);
if (c >= 0)
c += 32;
}
@@ -325,12 +326,13 @@
if (*bandwidth == 0)
return;
- ret = manage_bandwidth(card, irm_id, generation, *bandwidth, allocate);
+ ret = manage_bandwidth(card, irm_id, generation, *bandwidth,
+ allocate, buffer);
if (ret < 0)
*bandwidth = 0;
if (allocate && ret < 0 && c >= 0) {
- deallocate_channel(card, irm_id, generation, c);
+ deallocate_channel(card, irm_id, generation, c, buffer);
*channel = ret;
}
}
diff --git a/drivers/firewire/core.h b/drivers/firewire/core.h
index c3cfc64..6052816 100644
--- a/drivers/firewire/core.h
+++ b/drivers/firewire/core.h
@@ -120,7 +120,8 @@
int fw_iso_buffer_map(struct fw_iso_buffer *buffer, struct vm_area_struct *vma);
void fw_iso_resource_manage(struct fw_card *card, int generation,
- u64 channels_mask, int *channel, int *bandwidth, bool allocate);
+ u64 channels_mask, int *channel, int *bandwidth,
+ bool allocate, __be32 buffer[2]);
/* -topology */
diff --git a/drivers/firewire/sbp2.c b/drivers/firewire/sbp2.c
index 24c4563..8d51568 100644
--- a/drivers/firewire/sbp2.c
+++ b/drivers/firewire/sbp2.c
@@ -201,6 +201,12 @@
#define SBP2_CYCLE_LIMIT (0xc8 << 12) /* 200 125us cycles */
/*
+ * There is no transport protocol limit to the CDB length, but we implement
+ * a fixed length only. 16 bytes is enough for disks larger than 2 TB.
+ */
+#define SBP2_MAX_CDB_SIZE 16
+
+/*
* The default maximum s/g segment size of a FireWire controller is
* usually 0x10000, but SBP-2 only allows 0xffff. Since buffers have to
* be quadlet-aligned, we set the length limit to 0xffff & ~3.
@@ -312,7 +318,7 @@
struct sbp2_pointer next;
struct sbp2_pointer data_descriptor;
__be32 misc;
- u8 command_block[12];
+ u8 command_block[SBP2_MAX_CDB_SIZE];
} request;
struct scsi_cmnd *cmd;
scsi_done_fn_t done;
@@ -1146,6 +1152,8 @@
if (fw_device_enable_phys_dma(device) < 0)
goto fail_shost_put;
+ shost->max_cmd_len = SBP2_MAX_CDB_SIZE;
+
if (scsi_add_host(shost, &unit->device) < 0)
goto fail_shost_put;
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index 3582c39..96dda81 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -79,6 +79,12 @@
help
Say yes here to support the Xilinx FPGA GPIO device
+config GPIO_VR41XX
+ tristate "NEC VR4100 series General-purpose I/O Uint support"
+ depends on CPU_VR41XX
+ help
+ Say yes here to support the NEC VR4100 series General-purpose I/O Uint
+
comment "I2C GPIO expanders:"
config GPIO_MAX732X
diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
index ef90203..9244c6f 100644
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -13,3 +13,4 @@
obj-$(CONFIG_GPIO_TWL4030) += twl4030-gpio.o
obj-$(CONFIG_GPIO_XILINX) += xilinx_gpio.o
obj-$(CONFIG_GPIO_BT8XX) += bt8xxgpio.o
+obj-$(CONFIG_GPIO_VR41XX) += vr41xx_giu.o
diff --git a/drivers/gpio/pl061.c b/drivers/gpio/pl061.c
index aa8e7cb..4ee4c83 100644
--- a/drivers/gpio/pl061.c
+++ b/drivers/gpio/pl061.c
@@ -109,6 +109,16 @@
writeb(!!value << offset, chip->base + (1 << (offset + 2)));
}
+static int pl061_to_irq(struct gpio_chip *gc, unsigned offset)
+{
+ struct pl061_gpio *chip = container_of(gc, struct pl061_gpio, gc);
+
+ if (chip->irq_base == (unsigned) -1)
+ return -EINVAL;
+
+ return chip->irq_base + offset;
+}
+
/*
* PL061 GPIO IRQ
*/
@@ -200,7 +210,7 @@
desc->chip->ack(irq);
list_for_each(ptr, chip_list) {
unsigned long pending;
- int gpio;
+ int offset;
chip = list_entry(ptr, struct pl061_gpio, list);
pending = readb(chip->base + GPIOMIS);
@@ -209,8 +219,8 @@
if (pending == 0)
continue;
- for_each_bit(gpio, &pending, PL061_GPIO_NR)
- generic_handle_irq(gpio_to_irq(gpio));
+ for_each_bit(offset, &pending, PL061_GPIO_NR)
+ generic_handle_irq(pl061_to_irq(&chip->gc, offset));
}
desc->chip->unmask(irq);
}
@@ -221,7 +231,7 @@
struct pl061_gpio *chip;
struct list_head *chip_list;
int ret, irq, i;
- static unsigned long init_irq[BITS_TO_LONGS(NR_IRQS)];
+ static DECLARE_BITMAP(init_irq, NR_IRQS);
pdata = dev->dev.platform_data;
if (pdata == NULL)
@@ -251,6 +261,7 @@
chip->gc.direction_output = pl061_direction_output;
chip->gc.get = pl061_get_value;
chip->gc.set = pl061_set_value;
+ chip->gc.to_irq = pl061_to_irq;
chip->gc.base = pdata->gpio_base;
chip->gc.ngpio = PL061_GPIO_NR;
chip->gc.label = dev_name(&dev->dev);
@@ -280,6 +291,7 @@
if (!test_and_set_bit(irq, init_irq)) { /* list initialized? */
chip_list = kmalloc(sizeof(*chip_list), GFP_KERNEL);
if (chip_list == NULL) {
+ clear_bit(irq, init_irq);
ret = -ENOMEM;
goto iounmap;
}
diff --git a/drivers/gpio/vr41xx_giu.c b/drivers/gpio/vr41xx_giu.c
new file mode 100644
index 0000000..b16c9a8
--- /dev/null
+++ b/drivers/gpio/vr41xx_giu.c
@@ -0,0 +1,585 @@
+/*
+ * Driver for NEC VR4100 series General-purpose I/O Unit.
+ *
+ * Copyright (C) 2002 MontaVista Software Inc.
+ * Author: Yoichi Yuasa <source@mvista.com>
+ * Copyright (C) 2003-2009 Yoichi Yuasa <yuasa@linux-mips.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#include <linux/errno.h>
+#include <linux/fs.h>
+#include <linux/gpio.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/spinlock.h>
+#include <linux/types.h>
+
+#include <asm/vr41xx/giu.h>
+#include <asm/vr41xx/irq.h>
+#include <asm/vr41xx/vr41xx.h>
+
+MODULE_AUTHOR("Yoichi Yuasa <yuasa@linux-mips.org>");
+MODULE_DESCRIPTION("NEC VR4100 series General-purpose I/O Unit driver");
+MODULE_LICENSE("GPL");
+
+#define GIUIOSELL 0x00
+#define GIUIOSELH 0x02
+#define GIUPIODL 0x04
+#define GIUPIODH 0x06
+#define GIUINTSTATL 0x08
+#define GIUINTSTATH 0x0a
+#define GIUINTENL 0x0c
+#define GIUINTENH 0x0e
+#define GIUINTTYPL 0x10
+#define GIUINTTYPH 0x12
+#define GIUINTALSELL 0x14
+#define GIUINTALSELH 0x16
+#define GIUINTHTSELL 0x18
+#define GIUINTHTSELH 0x1a
+#define GIUPODATL 0x1c
+#define GIUPODATEN 0x1c
+#define GIUPODATH 0x1e
+ #define PIOEN0 0x0100
+ #define PIOEN1 0x0200
+#define GIUPODAT 0x1e
+#define GIUFEDGEINHL 0x20
+#define GIUFEDGEINHH 0x22
+#define GIUREDGEINHL 0x24
+#define GIUREDGEINHH 0x26
+
+#define GIUUSEUPDN 0x1e0
+#define GIUTERMUPDN 0x1e2
+
+#define GPIO_HAS_PULLUPDOWN_IO 0x0001
+#define GPIO_HAS_OUTPUT_ENABLE 0x0002
+#define GPIO_HAS_INTERRUPT_EDGE_SELECT 0x0100
+
+enum {
+ GPIO_INPUT,
+ GPIO_OUTPUT,
+};
+
+static DEFINE_SPINLOCK(giu_lock);
+static unsigned long giu_flags;
+
+static void __iomem *giu_base;
+
+#define giu_read(offset) readw(giu_base + (offset))
+#define giu_write(offset, value) writew((value), giu_base + (offset))
+
+#define GPIO_PIN_OF_IRQ(irq) ((irq) - GIU_IRQ_BASE)
+#define GIUINT_HIGH_OFFSET 16
+#define GIUINT_HIGH_MAX 32
+
+static inline u16 giu_set(u16 offset, u16 set)
+{
+ u16 data;
+
+ data = giu_read(offset);
+ data |= set;
+ giu_write(offset, data);
+
+ return data;
+}
+
+static inline u16 giu_clear(u16 offset, u16 clear)
+{
+ u16 data;
+
+ data = giu_read(offset);
+ data &= ~clear;
+ giu_write(offset, data);
+
+ return data;
+}
+
+static void ack_giuint_low(unsigned int irq)
+{
+ giu_write(GIUINTSTATL, 1 << GPIO_PIN_OF_IRQ(irq));
+}
+
+static void mask_giuint_low(unsigned int irq)
+{
+ giu_clear(GIUINTENL, 1 << GPIO_PIN_OF_IRQ(irq));
+}
+
+static void mask_ack_giuint_low(unsigned int irq)
+{
+ unsigned int pin;
+
+ pin = GPIO_PIN_OF_IRQ(irq);
+ giu_clear(GIUINTENL, 1 << pin);
+ giu_write(GIUINTSTATL, 1 << pin);
+}
+
+static void unmask_giuint_low(unsigned int irq)
+{
+ giu_set(GIUINTENL, 1 << GPIO_PIN_OF_IRQ(irq));
+}
+
+static struct irq_chip giuint_low_irq_chip = {
+ .name = "GIUINTL",
+ .ack = ack_giuint_low,
+ .mask = mask_giuint_low,
+ .mask_ack = mask_ack_giuint_low,
+ .unmask = unmask_giuint_low,
+};
+
+static void ack_giuint_high(unsigned int irq)
+{
+ giu_write(GIUINTSTATH,
+ 1 << (GPIO_PIN_OF_IRQ(irq) - GIUINT_HIGH_OFFSET));
+}
+
+static void mask_giuint_high(unsigned int irq)
+{
+ giu_clear(GIUINTENH, 1 << (GPIO_PIN_OF_IRQ(irq) - GIUINT_HIGH_OFFSET));
+}
+
+static void mask_ack_giuint_high(unsigned int irq)
+{
+ unsigned int pin;
+
+ pin = GPIO_PIN_OF_IRQ(irq) - GIUINT_HIGH_OFFSET;
+ giu_clear(GIUINTENH, 1 << pin);
+ giu_write(GIUINTSTATH, 1 << pin);
+}
+
+static void unmask_giuint_high(unsigned int irq)
+{
+ giu_set(GIUINTENH, 1 << (GPIO_PIN_OF_IRQ(irq) - GIUINT_HIGH_OFFSET));
+}
+
+static struct irq_chip giuint_high_irq_chip = {
+ .name = "GIUINTH",
+ .ack = ack_giuint_high,
+ .mask = mask_giuint_high,
+ .mask_ack = mask_ack_giuint_high,
+ .unmask = unmask_giuint_high,
+};
+
+static int giu_get_irq(unsigned int irq)
+{
+ u16 pendl, pendh, maskl, maskh;
+ int i;
+
+ pendl = giu_read(GIUINTSTATL);
+ pendh = giu_read(GIUINTSTATH);
+ maskl = giu_read(GIUINTENL);
+ maskh = giu_read(GIUINTENH);
+
+ maskl &= pendl;
+ maskh &= pendh;
+
+ if (maskl) {
+ for (i = 0; i < 16; i++) {
+ if (maskl & (1 << i))
+ return GIU_IRQ(i);
+ }
+ } else if (maskh) {
+ for (i = 0; i < 16; i++) {
+ if (maskh & (1 << i))
+ return GIU_IRQ(i + GIUINT_HIGH_OFFSET);
+ }
+ }
+
+ printk(KERN_ERR "spurious GIU interrupt: %04x(%04x),%04x(%04x)\n",
+ maskl, pendl, maskh, pendh);
+
+ atomic_inc(&irq_err_count);
+
+ return -EINVAL;
+}
+
+void vr41xx_set_irq_trigger(unsigned int pin, irq_trigger_t trigger,
+ irq_signal_t signal)
+{
+ u16 mask;
+
+ if (pin < GIUINT_HIGH_OFFSET) {
+ mask = 1 << pin;
+ if (trigger != IRQ_TRIGGER_LEVEL) {
+ giu_set(GIUINTTYPL, mask);
+ if (signal == IRQ_SIGNAL_HOLD)
+ giu_set(GIUINTHTSELL, mask);
+ else
+ giu_clear(GIUINTHTSELL, mask);
+ if (giu_flags & GPIO_HAS_INTERRUPT_EDGE_SELECT) {
+ switch (trigger) {
+ case IRQ_TRIGGER_EDGE_FALLING:
+ giu_set(GIUFEDGEINHL, mask);
+ giu_clear(GIUREDGEINHL, mask);
+ break;
+ case IRQ_TRIGGER_EDGE_RISING:
+ giu_clear(GIUFEDGEINHL, mask);
+ giu_set(GIUREDGEINHL, mask);
+ break;
+ default:
+ giu_set(GIUFEDGEINHL, mask);
+ giu_set(GIUREDGEINHL, mask);
+ break;
+ }
+ }
+ set_irq_chip_and_handler(GIU_IRQ(pin),
+ &giuint_low_irq_chip,
+ handle_edge_irq);
+ } else {
+ giu_clear(GIUINTTYPL, mask);
+ giu_clear(GIUINTHTSELL, mask);
+ set_irq_chip_and_handler(GIU_IRQ(pin),
+ &giuint_low_irq_chip,
+ handle_level_irq);
+ }
+ giu_write(GIUINTSTATL, mask);
+ } else if (pin < GIUINT_HIGH_MAX) {
+ mask = 1 << (pin - GIUINT_HIGH_OFFSET);
+ if (trigger != IRQ_TRIGGER_LEVEL) {
+ giu_set(GIUINTTYPH, mask);
+ if (signal == IRQ_SIGNAL_HOLD)
+ giu_set(GIUINTHTSELH, mask);
+ else
+ giu_clear(GIUINTHTSELH, mask);
+ if (giu_flags & GPIO_HAS_INTERRUPT_EDGE_SELECT) {
+ switch (trigger) {
+ case IRQ_TRIGGER_EDGE_FALLING:
+ giu_set(GIUFEDGEINHH, mask);
+ giu_clear(GIUREDGEINHH, mask);
+ break;
+ case IRQ_TRIGGER_EDGE_RISING:
+ giu_clear(GIUFEDGEINHH, mask);
+ giu_set(GIUREDGEINHH, mask);
+ break;
+ default:
+ giu_set(GIUFEDGEINHH, mask);
+ giu_set(GIUREDGEINHH, mask);
+ break;
+ }
+ }
+ set_irq_chip_and_handler(GIU_IRQ(pin),
+ &giuint_high_irq_chip,
+ handle_edge_irq);
+ } else {
+ giu_clear(GIUINTTYPH, mask);
+ giu_clear(GIUINTHTSELH, mask);
+ set_irq_chip_and_handler(GIU_IRQ(pin),
+ &giuint_high_irq_chip,
+ handle_level_irq);
+ }
+ giu_write(GIUINTSTATH, mask);
+ }
+}
+EXPORT_SYMBOL_GPL(vr41xx_set_irq_trigger);
+
+void vr41xx_set_irq_level(unsigned int pin, irq_level_t level)
+{
+ u16 mask;
+
+ if (pin < GIUINT_HIGH_OFFSET) {
+ mask = 1 << pin;
+ if (level == IRQ_LEVEL_HIGH)
+ giu_set(GIUINTALSELL, mask);
+ else
+ giu_clear(GIUINTALSELL, mask);
+ giu_write(GIUINTSTATL, mask);
+ } else if (pin < GIUINT_HIGH_MAX) {
+ mask = 1 << (pin - GIUINT_HIGH_OFFSET);
+ if (level == IRQ_LEVEL_HIGH)
+ giu_set(GIUINTALSELH, mask);
+ else
+ giu_clear(GIUINTALSELH, mask);
+ giu_write(GIUINTSTATH, mask);
+ }
+}
+EXPORT_SYMBOL_GPL(vr41xx_set_irq_level);
+
+static int giu_set_direction(struct gpio_chip *chip, unsigned pin, int dir)
+{
+ u16 offset, mask, reg;
+ unsigned long flags;
+
+ if (pin >= chip->ngpio)
+ return -EINVAL;
+
+ if (pin < 16) {
+ offset = GIUIOSELL;
+ mask = 1 << pin;
+ } else if (pin < 32) {
+ offset = GIUIOSELH;
+ mask = 1 << (pin - 16);
+ } else {
+ if (giu_flags & GPIO_HAS_OUTPUT_ENABLE) {
+ offset = GIUPODATEN;
+ mask = 1 << (pin - 32);
+ } else {
+ switch (pin) {
+ case 48:
+ offset = GIUPODATH;
+ mask = PIOEN0;
+ break;
+ case 49:
+ offset = GIUPODATH;
+ mask = PIOEN1;
+ break;
+ default:
+ return -EINVAL;
+ }
+ }
+ }
+
+ spin_lock_irqsave(&giu_lock, flags);
+
+ reg = giu_read(offset);
+ if (dir == GPIO_OUTPUT)
+ reg |= mask;
+ else
+ reg &= ~mask;
+ giu_write(offset, reg);
+
+ spin_unlock_irqrestore(&giu_lock, flags);
+
+ return 0;
+}
+
+int vr41xx_gpio_pullupdown(unsigned int pin, gpio_pull_t pull)
+{
+ u16 reg, mask;
+ unsigned long flags;
+
+ if ((giu_flags & GPIO_HAS_PULLUPDOWN_IO) != GPIO_HAS_PULLUPDOWN_IO)
+ return -EPERM;
+
+ if (pin >= 15)
+ return -EINVAL;
+
+ mask = 1 << pin;
+
+ spin_lock_irqsave(&giu_lock, flags);
+
+ if (pull == GPIO_PULL_UP || pull == GPIO_PULL_DOWN) {
+ reg = giu_read(GIUTERMUPDN);
+ if (pull == GPIO_PULL_UP)
+ reg |= mask;
+ else
+ reg &= ~mask;
+ giu_write(GIUTERMUPDN, reg);
+
+ reg = giu_read(GIUUSEUPDN);
+ reg |= mask;
+ giu_write(GIUUSEUPDN, reg);
+ } else {
+ reg = giu_read(GIUUSEUPDN);
+ reg &= ~mask;
+ giu_write(GIUUSEUPDN, reg);
+ }
+
+ spin_unlock_irqrestore(&giu_lock, flags);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(vr41xx_gpio_pullupdown);
+
+static int vr41xx_gpio_get(struct gpio_chip *chip, unsigned pin)
+{
+ u16 reg, mask;
+
+ if (pin >= chip->ngpio)
+ return -EINVAL;
+
+ if (pin < 16) {
+ reg = giu_read(GIUPIODL);
+ mask = 1 << pin;
+ } else if (pin < 32) {
+ reg = giu_read(GIUPIODH);
+ mask = 1 << (pin - 16);
+ } else if (pin < 48) {
+ reg = giu_read(GIUPODATL);
+ mask = 1 << (pin - 32);
+ } else {
+ reg = giu_read(GIUPODATH);
+ mask = 1 << (pin - 48);
+ }
+
+ if (reg & mask)
+ return 1;
+
+ return 0;
+}
+
+static void vr41xx_gpio_set(struct gpio_chip *chip, unsigned pin,
+ int value)
+{
+ u16 offset, mask, reg;
+ unsigned long flags;
+
+ if (pin >= chip->ngpio)
+ return;
+
+ if (pin < 16) {
+ offset = GIUPIODL;
+ mask = 1 << pin;
+ } else if (pin < 32) {
+ offset = GIUPIODH;
+ mask = 1 << (pin - 16);
+ } else if (pin < 48) {
+ offset = GIUPODATL;
+ mask = 1 << (pin - 32);
+ } else {
+ offset = GIUPODATH;
+ mask = 1 << (pin - 48);
+ }
+
+ spin_lock_irqsave(&giu_lock, flags);
+
+ reg = giu_read(offset);
+ if (value)
+ reg |= mask;
+ else
+ reg &= ~mask;
+ giu_write(offset, reg);
+
+ spin_unlock_irqrestore(&giu_lock, flags);
+}
+
+
+static int vr41xx_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
+{
+ return giu_set_direction(chip, offset, GPIO_INPUT);
+}
+
+static int vr41xx_gpio_direction_output(struct gpio_chip *chip, unsigned offset,
+ int value)
+{
+ vr41xx_gpio_set(chip, offset, value);
+
+ return giu_set_direction(chip, offset, GPIO_OUTPUT);
+}
+
+static int vr41xx_gpio_to_irq(struct gpio_chip *chip, unsigned offset)
+{
+ if (offset >= chip->ngpio)
+ return -EINVAL;
+
+ return GIU_IRQ_BASE + offset;
+}
+
+static struct gpio_chip vr41xx_gpio_chip = {
+ .label = "vr41xx",
+ .owner = THIS_MODULE,
+ .direction_input = vr41xx_gpio_direction_input,
+ .get = vr41xx_gpio_get,
+ .direction_output = vr41xx_gpio_direction_output,
+ .set = vr41xx_gpio_set,
+ .to_irq = vr41xx_gpio_to_irq,
+};
+
+static int __devinit giu_probe(struct platform_device *pdev)
+{
+ struct resource *res;
+ unsigned int trigger, i, pin;
+ struct irq_chip *chip;
+ int irq, retval;
+
+ switch (pdev->id) {
+ case GPIO_50PINS_PULLUPDOWN:
+ giu_flags = GPIO_HAS_PULLUPDOWN_IO;
+ vr41xx_gpio_chip.ngpio = 50;
+ break;
+ case GPIO_36PINS:
+ vr41xx_gpio_chip.ngpio = 36;
+ break;
+ case GPIO_48PINS_EDGE_SELECT:
+ giu_flags = GPIO_HAS_INTERRUPT_EDGE_SELECT;
+ vr41xx_gpio_chip.ngpio = 48;
+ break;
+ default:
+ dev_err(&pdev->dev, "GIU: unknown ID %d\n", pdev->id);
+ return -ENODEV;
+ }
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res)
+ return -EBUSY;
+
+ giu_base = ioremap(res->start, res->end - res->start + 1);
+ if (!giu_base)
+ return -ENOMEM;
+
+ vr41xx_gpio_chip.dev = &pdev->dev;
+
+ retval = gpiochip_add(&vr41xx_gpio_chip);
+
+ giu_write(GIUINTENL, 0);
+ giu_write(GIUINTENH, 0);
+
+ trigger = giu_read(GIUINTTYPH) << 16;
+ trigger |= giu_read(GIUINTTYPL);
+ for (i = GIU_IRQ_BASE; i <= GIU_IRQ_LAST; i++) {
+ pin = GPIO_PIN_OF_IRQ(i);
+ if (pin < GIUINT_HIGH_OFFSET)
+ chip = &giuint_low_irq_chip;
+ else
+ chip = &giuint_high_irq_chip;
+
+ if (trigger & (1 << pin))
+ set_irq_chip_and_handler(i, chip, handle_edge_irq);
+ else
+ set_irq_chip_and_handler(i, chip, handle_level_irq);
+
+ }
+
+ irq = platform_get_irq(pdev, 0);
+ if (irq < 0 || irq >= nr_irqs)
+ return -EBUSY;
+
+ return cascade_irq(irq, giu_get_irq);
+}
+
+static int __devexit giu_remove(struct platform_device *pdev)
+{
+ if (giu_base) {
+ iounmap(giu_base);
+ giu_base = NULL;
+ }
+
+ return 0;
+}
+
+static struct platform_driver giu_device_driver = {
+ .probe = giu_probe,
+ .remove = __devexit_p(giu_remove),
+ .driver = {
+ .name = "GIU",
+ .owner = THIS_MODULE,
+ },
+};
+
+static int __init vr41xx_giu_init(void)
+{
+ return platform_driver_register(&giu_device_driver);
+}
+
+static void __exit vr41xx_giu_exit(void)
+{
+ platform_driver_unregister(&giu_device_driver);
+}
+
+module_init(vr41xx_giu_init);
+module_exit(vr41xx_giu_exit);
diff --git a/drivers/gpu/drm/Kconfig b/drivers/gpu/drm/Kconfig
index c961fe4..39b393d 100644
--- a/drivers/gpu/drm/Kconfig
+++ b/drivers/gpu/drm/Kconfig
@@ -81,6 +81,7 @@
config DRM_I915
tristate "i915 driver"
+ depends on AGP_INTEL
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
diff --git a/drivers/gpu/drm/Makefile b/drivers/gpu/drm/Makefile
index 4e89ab0..fe23f29 100644
--- a/drivers/gpu/drm/Makefile
+++ b/drivers/gpu/drm/Makefile
@@ -16,6 +16,7 @@
drm-$(CONFIG_COMPAT) += drm_ioc32.o
obj-$(CONFIG_DRM) += drm.o
+obj-$(CONFIG_DRM_TTM) += ttm/
obj-$(CONFIG_DRM_TDFX) += tdfx/
obj-$(CONFIG_DRM_R128) += r128/
obj-$(CONFIG_DRM_RADEON)+= radeon/
@@ -26,4 +27,3 @@
obj-$(CONFIG_DRM_SIS) += sis/
obj-$(CONFIG_DRM_SAVAGE)+= savage/
obj-$(CONFIG_DRM_VIA) +=via/
-obj-$(CONFIG_DRM_TTM) += ttm/
diff --git a/drivers/gpu/drm/drm_crtc_helper.c b/drivers/gpu/drm/drm_crtc_helper.c
index a6f73f1..3da9cfa 100644
--- a/drivers/gpu/drm/drm_crtc_helper.c
+++ b/drivers/gpu/drm/drm_crtc_helper.c
@@ -1090,6 +1090,8 @@
if (ret == false)
DRM_ERROR("failed to set mode on crtc %p\n", crtc);
}
+ /* disable the unused connectors while restoring the modesetting */
+ drm_helper_disable_unused_functions(dev);
return 0;
}
EXPORT_SYMBOL(drm_helper_resume_force_mode);
diff --git a/drivers/gpu/drm/drm_edid.c b/drivers/gpu/drm/drm_edid.c
index 7d08352..80cc6d0 100644
--- a/drivers/gpu/drm/drm_edid.c
+++ b/drivers/gpu/drm/drm_edid.c
@@ -294,10 +294,10 @@
unsigned vactive = (pt->vactive_vblank_hi & 0xf0) << 4 | pt->vactive_lo;
unsigned hblank = (pt->hactive_hblank_hi & 0xf) << 8 | pt->hblank_lo;
unsigned vblank = (pt->vactive_vblank_hi & 0xf) << 8 | pt->vblank_lo;
- unsigned hsync_offset = (pt->hsync_vsync_offset_pulse_width_hi & 0x3) << 8 | pt->hsync_offset_lo;
- unsigned hsync_pulse_width = (pt->hsync_vsync_offset_pulse_width_hi & 0xc) << 6 | pt->hsync_pulse_width_lo;
- unsigned vsync_offset = (pt->hsync_vsync_offset_pulse_width_hi & 0x30) | (pt->vsync_offset_pulse_width_lo & 0xf);
- unsigned vsync_pulse_width = (pt->hsync_vsync_offset_pulse_width_hi & 0xc0) >> 2 | pt->vsync_offset_pulse_width_lo >> 4;
+ unsigned hsync_offset = (pt->hsync_vsync_offset_pulse_width_hi & 0xc0) << 2 | pt->hsync_offset_lo;
+ unsigned hsync_pulse_width = (pt->hsync_vsync_offset_pulse_width_hi & 0x30) << 4 | pt->hsync_pulse_width_lo;
+ unsigned vsync_offset = (pt->hsync_vsync_offset_pulse_width_hi & 0xc) >> 2 | pt->vsync_offset_pulse_width_lo >> 4;
+ unsigned vsync_pulse_width = (pt->hsync_vsync_offset_pulse_width_hi & 0x3) << 4 | (pt->vsync_offset_pulse_width_lo & 0xf);
/* ignore tiny modes */
if (hactive < 64 || vactive < 64)
@@ -347,8 +347,8 @@
mode->flags |= (pt->misc & DRM_EDID_PT_VSYNC_POSITIVE) ?
DRM_MODE_FLAG_PVSYNC : DRM_MODE_FLAG_NVSYNC;
- mode->width_mm = pt->width_mm_lo | (pt->width_height_mm_hi & 0xf) << 8;
- mode->height_mm = pt->height_mm_lo | (pt->width_height_mm_hi & 0xf0) << 4;
+ mode->width_mm = pt->width_mm_lo | (pt->width_height_mm_hi & 0xf0) << 4;
+ mode->height_mm = pt->height_mm_lo | (pt->width_height_mm_hi & 0xf) << 8;
if (quirks & EDID_QUIRK_DETAILED_IN_CM) {
mode->width_mm *= 10;
diff --git a/drivers/gpu/drm/i915/Makefile b/drivers/gpu/drm/i915/Makefile
index 51c5a05..30d6b99 100644
--- a/drivers/gpu/drm/i915/Makefile
+++ b/drivers/gpu/drm/i915/Makefile
@@ -13,6 +13,8 @@
intel_crt.o \
intel_lvds.o \
intel_bios.o \
+ intel_dp.o \
+ intel_dp_i2c.o \
intel_hdmi.o \
intel_sdvo.o \
intel_modes.o \
diff --git a/drivers/gpu/drm/i915/dvo.h b/drivers/gpu/drm/i915/dvo.h
index e747ac4..288fc50 100644
--- a/drivers/gpu/drm/i915/dvo.h
+++ b/drivers/gpu/drm/i915/dvo.h
@@ -37,7 +37,7 @@
/* GPIO register used for i2c bus to control this device */
u32 gpio;
int slave_addr;
- struct intel_i2c_chan *i2c_bus;
+ struct i2c_adapter *i2c_bus;
const struct intel_dvo_dev_ops *dev_ops;
void *dev_priv;
@@ -52,7 +52,7 @@
* Returns NULL if the device does not exist.
*/
bool (*init)(struct intel_dvo_device *dvo,
- struct intel_i2c_chan *i2cbus);
+ struct i2c_adapter *i2cbus);
/*
* Called to allow the output a chance to create properties after the
diff --git a/drivers/gpu/drm/i915/dvo_ch7017.c b/drivers/gpu/drm/i915/dvo_ch7017.c
index 03d4b49..621815b 100644
--- a/drivers/gpu/drm/i915/dvo_ch7017.c
+++ b/drivers/gpu/drm/i915/dvo_ch7017.c
@@ -176,19 +176,20 @@
static bool ch7017_read(struct intel_dvo_device *dvo, int addr, uint8_t *val)
{
- struct intel_i2c_chan *i2cbus = dvo->i2c_bus;
+ struct i2c_adapter *adapter = dvo->i2c_bus;
+ struct intel_i2c_chan *i2cbus = container_of(adapter, struct intel_i2c_chan, adapter);
u8 out_buf[2];
u8 in_buf[2];
struct i2c_msg msgs[] = {
{
- .addr = i2cbus->slave_addr,
+ .addr = dvo->slave_addr,
.flags = 0,
.len = 1,
.buf = out_buf,
},
{
- .addr = i2cbus->slave_addr,
+ .addr = dvo->slave_addr,
.flags = I2C_M_RD,
.len = 1,
.buf = in_buf,
@@ -208,10 +209,11 @@
static bool ch7017_write(struct intel_dvo_device *dvo, int addr, uint8_t val)
{
- struct intel_i2c_chan *i2cbus = dvo->i2c_bus;
+ struct i2c_adapter *adapter = dvo->i2c_bus;
+ struct intel_i2c_chan *i2cbus = container_of(adapter, struct intel_i2c_chan, adapter);
uint8_t out_buf[2];
struct i2c_msg msg = {
- .addr = i2cbus->slave_addr,
+ .addr = dvo->slave_addr,
.flags = 0,
.len = 2,
.buf = out_buf,
@@ -228,8 +230,9 @@
/** Probes for a CH7017 on the given bus and slave address. */
static bool ch7017_init(struct intel_dvo_device *dvo,
- struct intel_i2c_chan *i2cbus)
+ struct i2c_adapter *adapter)
{
+ struct intel_i2c_chan *i2cbus = container_of(adapter, struct intel_i2c_chan, adapter);
struct ch7017_priv *priv;
uint8_t val;
@@ -237,8 +240,7 @@
if (priv == NULL)
return false;
- dvo->i2c_bus = i2cbus;
- dvo->i2c_bus->slave_addr = dvo->slave_addr;
+ dvo->i2c_bus = adapter;
dvo->dev_priv = priv;
if (!ch7017_read(dvo, CH7017_DEVICE_ID, &val))
@@ -248,7 +250,7 @@
val != CH7018_DEVICE_ID_VALUE &&
val != CH7019_DEVICE_ID_VALUE) {
DRM_DEBUG("ch701x not detected, got %d: from %s Slave %d.\n",
- val, i2cbus->adapter.name,i2cbus->slave_addr);
+ val, i2cbus->adapter.name,dvo->slave_addr);
goto fail;
}
diff --git a/drivers/gpu/drm/i915/dvo_ch7xxx.c b/drivers/gpu/drm/i915/dvo_ch7xxx.c
index d2fd95d..a9b8962 100644
--- a/drivers/gpu/drm/i915/dvo_ch7xxx.c
+++ b/drivers/gpu/drm/i915/dvo_ch7xxx.c
@@ -123,19 +123,20 @@
static bool ch7xxx_readb(struct intel_dvo_device *dvo, int addr, uint8_t *ch)
{
struct ch7xxx_priv *ch7xxx= dvo->dev_priv;
- struct intel_i2c_chan *i2cbus = dvo->i2c_bus;
+ struct i2c_adapter *adapter = dvo->i2c_bus;
+ struct intel_i2c_chan *i2cbus = container_of(adapter, struct intel_i2c_chan, adapter);
u8 out_buf[2];
u8 in_buf[2];
struct i2c_msg msgs[] = {
{
- .addr = i2cbus->slave_addr,
+ .addr = dvo->slave_addr,
.flags = 0,
.len = 1,
.buf = out_buf,
},
{
- .addr = i2cbus->slave_addr,
+ .addr = dvo->slave_addr,
.flags = I2C_M_RD,
.len = 1,
.buf = in_buf,
@@ -152,7 +153,7 @@
if (!ch7xxx->quiet) {
DRM_DEBUG("Unable to read register 0x%02x from %s:%02x.\n",
- addr, i2cbus->adapter.name, i2cbus->slave_addr);
+ addr, i2cbus->adapter.name, dvo->slave_addr);
}
return false;
}
@@ -161,10 +162,11 @@
static bool ch7xxx_writeb(struct intel_dvo_device *dvo, int addr, uint8_t ch)
{
struct ch7xxx_priv *ch7xxx = dvo->dev_priv;
- struct intel_i2c_chan *i2cbus = dvo->i2c_bus;
+ struct i2c_adapter *adapter = dvo->i2c_bus;
+ struct intel_i2c_chan *i2cbus = container_of(adapter, struct intel_i2c_chan, adapter);
uint8_t out_buf[2];
struct i2c_msg msg = {
- .addr = i2cbus->slave_addr,
+ .addr = dvo->slave_addr,
.flags = 0,
.len = 2,
.buf = out_buf,
@@ -178,14 +180,14 @@
if (!ch7xxx->quiet) {
DRM_DEBUG("Unable to write register 0x%02x to %s:%d.\n",
- addr, i2cbus->adapter.name, i2cbus->slave_addr);
+ addr, i2cbus->adapter.name, dvo->slave_addr);
}
return false;
}
static bool ch7xxx_init(struct intel_dvo_device *dvo,
- struct intel_i2c_chan *i2cbus)
+ struct i2c_adapter *adapter)
{
/* this will detect the CH7xxx chip on the specified i2c bus */
struct ch7xxx_priv *ch7xxx;
@@ -196,8 +198,7 @@
if (ch7xxx == NULL)
return false;
- dvo->i2c_bus = i2cbus;
- dvo->i2c_bus->slave_addr = dvo->slave_addr;
+ dvo->i2c_bus = adapter;
dvo->dev_priv = ch7xxx;
ch7xxx->quiet = true;
@@ -207,7 +208,7 @@
name = ch7xxx_get_id(vendor);
if (!name) {
DRM_DEBUG("ch7xxx not detected; got 0x%02x from %s slave %d.\n",
- vendor, i2cbus->adapter.name, i2cbus->slave_addr);
+ vendor, adapter->name, dvo->slave_addr);
goto out;
}
@@ -217,7 +218,7 @@
if (device != CH7xxx_DID) {
DRM_DEBUG("ch7xxx not detected; got 0x%02x from %s slave %d.\n",
- vendor, i2cbus->adapter.name, i2cbus->slave_addr);
+ vendor, adapter->name, dvo->slave_addr);
goto out;
}
diff --git a/drivers/gpu/drm/i915/dvo_ivch.c b/drivers/gpu/drm/i915/dvo_ivch.c
index 0c8d375..aa176f9 100644
--- a/drivers/gpu/drm/i915/dvo_ivch.c
+++ b/drivers/gpu/drm/i915/dvo_ivch.c
@@ -169,13 +169,14 @@
static bool ivch_read(struct intel_dvo_device *dvo, int addr, uint16_t *data)
{
struct ivch_priv *priv = dvo->dev_priv;
- struct intel_i2c_chan *i2cbus = dvo->i2c_bus;
+ struct i2c_adapter *adapter = dvo->i2c_bus;
+ struct intel_i2c_chan *i2cbus = container_of(adapter, struct intel_i2c_chan, adapter);
u8 out_buf[1];
u8 in_buf[2];
struct i2c_msg msgs[] = {
{
- .addr = i2cbus->slave_addr,
+ .addr = dvo->slave_addr,
.flags = I2C_M_RD,
.len = 0,
},
@@ -186,7 +187,7 @@
.buf = out_buf,
},
{
- .addr = i2cbus->slave_addr,
+ .addr = dvo->slave_addr,
.flags = I2C_M_RD | I2C_M_NOSTART,
.len = 2,
.buf = in_buf,
@@ -202,7 +203,7 @@
if (!priv->quiet) {
DRM_DEBUG("Unable to read register 0x%02x from %s:%02x.\n",
- addr, i2cbus->adapter.name, i2cbus->slave_addr);
+ addr, i2cbus->adapter.name, dvo->slave_addr);
}
return false;
}
@@ -211,10 +212,11 @@
static bool ivch_write(struct intel_dvo_device *dvo, int addr, uint16_t data)
{
struct ivch_priv *priv = dvo->dev_priv;
- struct intel_i2c_chan *i2cbus = dvo->i2c_bus;
+ struct i2c_adapter *adapter = dvo->i2c_bus;
+ struct intel_i2c_chan *i2cbus = container_of(adapter, struct intel_i2c_chan, adapter);
u8 out_buf[3];
struct i2c_msg msg = {
- .addr = i2cbus->slave_addr,
+ .addr = dvo->slave_addr,
.flags = 0,
.len = 3,
.buf = out_buf,
@@ -229,7 +231,7 @@
if (!priv->quiet) {
DRM_DEBUG("Unable to write register 0x%02x to %s:%d.\n",
- addr, i2cbus->adapter.name, i2cbus->slave_addr);
+ addr, i2cbus->adapter.name, dvo->slave_addr);
}
return false;
@@ -237,7 +239,7 @@
/** Probes the given bus and slave address for an ivch */
static bool ivch_init(struct intel_dvo_device *dvo,
- struct intel_i2c_chan *i2cbus)
+ struct i2c_adapter *adapter)
{
struct ivch_priv *priv;
uint16_t temp;
@@ -246,8 +248,7 @@
if (priv == NULL)
return false;
- dvo->i2c_bus = i2cbus;
- dvo->i2c_bus->slave_addr = dvo->slave_addr;
+ dvo->i2c_bus = adapter;
dvo->dev_priv = priv;
priv->quiet = true;
diff --git a/drivers/gpu/drm/i915/dvo_sil164.c b/drivers/gpu/drm/i915/dvo_sil164.c
index 033a4bb..e1c1f73 100644
--- a/drivers/gpu/drm/i915/dvo_sil164.c
+++ b/drivers/gpu/drm/i915/dvo_sil164.c
@@ -76,19 +76,20 @@
static bool sil164_readb(struct intel_dvo_device *dvo, int addr, uint8_t *ch)
{
struct sil164_priv *sil = dvo->dev_priv;
- struct intel_i2c_chan *i2cbus = dvo->i2c_bus;
+ struct i2c_adapter *adapter = dvo->i2c_bus;
+ struct intel_i2c_chan *i2cbus = container_of(adapter, struct intel_i2c_chan, adapter);
u8 out_buf[2];
u8 in_buf[2];
struct i2c_msg msgs[] = {
{
- .addr = i2cbus->slave_addr,
+ .addr = dvo->slave_addr,
.flags = 0,
.len = 1,
.buf = out_buf,
},
{
- .addr = i2cbus->slave_addr,
+ .addr = dvo->slave_addr,
.flags = I2C_M_RD,
.len = 1,
.buf = in_buf,
@@ -105,7 +106,7 @@
if (!sil->quiet) {
DRM_DEBUG("Unable to read register 0x%02x from %s:%02x.\n",
- addr, i2cbus->adapter.name, i2cbus->slave_addr);
+ addr, i2cbus->adapter.name, dvo->slave_addr);
}
return false;
}
@@ -113,10 +114,11 @@
static bool sil164_writeb(struct intel_dvo_device *dvo, int addr, uint8_t ch)
{
struct sil164_priv *sil= dvo->dev_priv;
- struct intel_i2c_chan *i2cbus = dvo->i2c_bus;
+ struct i2c_adapter *adapter = dvo->i2c_bus;
+ struct intel_i2c_chan *i2cbus = container_of(adapter, struct intel_i2c_chan, adapter);
uint8_t out_buf[2];
struct i2c_msg msg = {
- .addr = i2cbus->slave_addr,
+ .addr = dvo->slave_addr,
.flags = 0,
.len = 2,
.buf = out_buf,
@@ -130,7 +132,7 @@
if (!sil->quiet) {
DRM_DEBUG("Unable to write register 0x%02x to %s:%d.\n",
- addr, i2cbus->adapter.name, i2cbus->slave_addr);
+ addr, i2cbus->adapter.name, dvo->slave_addr);
}
return false;
@@ -138,7 +140,7 @@
/* Silicon Image 164 driver for chip on i2c bus */
static bool sil164_init(struct intel_dvo_device *dvo,
- struct intel_i2c_chan *i2cbus)
+ struct i2c_adapter *adapter)
{
/* this will detect the SIL164 chip on the specified i2c bus */
struct sil164_priv *sil;
@@ -148,8 +150,7 @@
if (sil == NULL)
return false;
- dvo->i2c_bus = i2cbus;
- dvo->i2c_bus->slave_addr = dvo->slave_addr;
+ dvo->i2c_bus = adapter;
dvo->dev_priv = sil;
sil->quiet = true;
@@ -158,7 +159,7 @@
if (ch != (SIL164_VID & 0xff)) {
DRM_DEBUG("sil164 not detected got %d: from %s Slave %d.\n",
- ch, i2cbus->adapter.name, i2cbus->slave_addr);
+ ch, adapter->name, dvo->slave_addr);
goto out;
}
@@ -167,7 +168,7 @@
if (ch != (SIL164_DID & 0xff)) {
DRM_DEBUG("sil164 not detected got %d: from %s Slave %d.\n",
- ch, i2cbus->adapter.name, i2cbus->slave_addr);
+ ch, adapter->name, dvo->slave_addr);
goto out;
}
sil->quiet = false;
diff --git a/drivers/gpu/drm/i915/dvo_tfp410.c b/drivers/gpu/drm/i915/dvo_tfp410.c
index 207fda8..9ecc907 100644
--- a/drivers/gpu/drm/i915/dvo_tfp410.c
+++ b/drivers/gpu/drm/i915/dvo_tfp410.c
@@ -101,19 +101,20 @@
static bool tfp410_readb(struct intel_dvo_device *dvo, int addr, uint8_t *ch)
{
struct tfp410_priv *tfp = dvo->dev_priv;
- struct intel_i2c_chan *i2cbus = dvo->i2c_bus;
+ struct i2c_adapter *adapter = dvo->i2c_bus;
+ struct intel_i2c_chan *i2cbus = container_of(adapter, struct intel_i2c_chan, adapter);
u8 out_buf[2];
u8 in_buf[2];
struct i2c_msg msgs[] = {
{
- .addr = i2cbus->slave_addr,
+ .addr = dvo->slave_addr,
.flags = 0,
.len = 1,
.buf = out_buf,
},
{
- .addr = i2cbus->slave_addr,
+ .addr = dvo->slave_addr,
.flags = I2C_M_RD,
.len = 1,
.buf = in_buf,
@@ -130,7 +131,7 @@
if (!tfp->quiet) {
DRM_DEBUG("Unable to read register 0x%02x from %s:%02x.\n",
- addr, i2cbus->adapter.name, i2cbus->slave_addr);
+ addr, i2cbus->adapter.name, dvo->slave_addr);
}
return false;
}
@@ -138,10 +139,11 @@
static bool tfp410_writeb(struct intel_dvo_device *dvo, int addr, uint8_t ch)
{
struct tfp410_priv *tfp = dvo->dev_priv;
- struct intel_i2c_chan *i2cbus = dvo->i2c_bus;
+ struct i2c_adapter *adapter = dvo->i2c_bus;
+ struct intel_i2c_chan *i2cbus = container_of(adapter, struct intel_i2c_chan, adapter);
uint8_t out_buf[2];
struct i2c_msg msg = {
- .addr = i2cbus->slave_addr,
+ .addr = dvo->slave_addr,
.flags = 0,
.len = 2,
.buf = out_buf,
@@ -155,7 +157,7 @@
if (!tfp->quiet) {
DRM_DEBUG("Unable to write register 0x%02x to %s:%d.\n",
- addr, i2cbus->adapter.name, i2cbus->slave_addr);
+ addr, i2cbus->adapter.name, dvo->slave_addr);
}
return false;
@@ -174,7 +176,7 @@
/* Ti TFP410 driver for chip on i2c bus */
static bool tfp410_init(struct intel_dvo_device *dvo,
- struct intel_i2c_chan *i2cbus)
+ struct i2c_adapter *adapter)
{
/* this will detect the tfp410 chip on the specified i2c bus */
struct tfp410_priv *tfp;
@@ -184,20 +186,19 @@
if (tfp == NULL)
return false;
- dvo->i2c_bus = i2cbus;
- dvo->i2c_bus->slave_addr = dvo->slave_addr;
+ dvo->i2c_bus = adapter;
dvo->dev_priv = tfp;
tfp->quiet = true;
if ((id = tfp410_getid(dvo, TFP410_VID_LO)) != TFP410_VID) {
DRM_DEBUG("tfp410 not detected got VID %X: from %s Slave %d.\n",
- id, i2cbus->adapter.name, i2cbus->slave_addr);
+ id, adapter->name, dvo->slave_addr);
goto out;
}
if ((id = tfp410_getid(dvo, TFP410_DID_LO)) != TFP410_DID) {
DRM_DEBUG("tfp410 not detected got DID %X: from %s Slave %d.\n",
- id, i2cbus->adapter.name, i2cbus->slave_addr);
+ id, adapter->name, dvo->slave_addr);
goto out;
}
tfp->quiet = false;
diff --git a/drivers/gpu/drm/i915/i915_dma.c b/drivers/gpu/drm/i915/i915_dma.c
index f112c76..8c47831 100644
--- a/drivers/gpu/drm/i915/i915_dma.c
+++ b/drivers/gpu/drm/i915/i915_dma.c
@@ -846,7 +846,7 @@
return 0;
}
- printk(KERN_DEBUG "set status page addr 0x%08x\n", (u32)hws->addr);
+ DRM_DEBUG("set status page addr 0x%08x\n", (u32)hws->addr);
dev_priv->status_gfx_addr = hws->addr & (0x1ffff<<12);
@@ -885,8 +885,8 @@
* some RAM for the framebuffer at early boot. This code figures out
* how much was set aside so we can use it for our own purposes.
*/
-static int i915_probe_agp(struct drm_device *dev, unsigned long *aperture_size,
- unsigned long *preallocated_size)
+static int i915_probe_agp(struct drm_device *dev, uint32_t *aperture_size,
+ uint32_t *preallocated_size)
{
struct pci_dev *bridge_dev;
u16 tmp = 0;
@@ -984,10 +984,11 @@
return 0;
}
-static int i915_load_modeset_init(struct drm_device *dev)
+static int i915_load_modeset_init(struct drm_device *dev,
+ unsigned long prealloc_size,
+ unsigned long agp_size)
{
struct drm_i915_private *dev_priv = dev->dev_private;
- unsigned long agp_size, prealloc_size;
int fb_bar = IS_I9XX(dev) ? 2 : 0;
int ret = 0;
@@ -1002,10 +1003,6 @@
if (IS_I965G(dev) || IS_G33(dev))
dev_priv->cursor_needs_physical = false;
- ret = i915_probe_agp(dev, &agp_size, &prealloc_size);
- if (ret)
- goto out;
-
/* Basic memrange allocator for stolen space (aka vram) */
drm_mm_init(&dev_priv->vram, 0, prealloc_size);
@@ -1082,6 +1079,44 @@
master->driver_priv = NULL;
}
+static void i915_get_mem_freq(struct drm_device *dev)
+{
+ drm_i915_private_t *dev_priv = dev->dev_private;
+ u32 tmp;
+
+ if (!IS_IGD(dev))
+ return;
+
+ tmp = I915_READ(CLKCFG);
+
+ switch (tmp & CLKCFG_FSB_MASK) {
+ case CLKCFG_FSB_533:
+ dev_priv->fsb_freq = 533; /* 133*4 */
+ break;
+ case CLKCFG_FSB_800:
+ dev_priv->fsb_freq = 800; /* 200*4 */
+ break;
+ case CLKCFG_FSB_667:
+ dev_priv->fsb_freq = 667; /* 167*4 */
+ break;
+ case CLKCFG_FSB_400:
+ dev_priv->fsb_freq = 400; /* 100*4 */
+ break;
+ }
+
+ switch (tmp & CLKCFG_MEM_MASK) {
+ case CLKCFG_MEM_533:
+ dev_priv->mem_freq = 533;
+ break;
+ case CLKCFG_MEM_667:
+ dev_priv->mem_freq = 667;
+ break;
+ case CLKCFG_MEM_800:
+ dev_priv->mem_freq = 800;
+ break;
+ }
+}
+
/**
* i915_driver_load - setup chip and create an initial config
* @dev: DRM device
@@ -1098,6 +1133,7 @@
struct drm_i915_private *dev_priv = dev->dev_private;
resource_size_t base, size;
int ret = 0, mmio_bar = IS_I9XX(dev) ? 0 : 1;
+ uint32_t agp_size, prealloc_size;
/* i915 has 4 more counters */
dev->counters += 4;
@@ -1146,9 +1182,22 @@
"performance may suffer.\n");
}
+ ret = i915_probe_agp(dev, &agp_size, &prealloc_size);
+ if (ret)
+ goto out_iomapfree;
+
/* enable GEM by default */
dev_priv->has_gem = 1;
+ if (prealloc_size > agp_size * 3 / 4) {
+ DRM_ERROR("Detected broken video BIOS with %d/%dkB of video "
+ "memory stolen.\n",
+ prealloc_size / 1024, agp_size / 1024);
+ DRM_ERROR("Disabling GEM. (try reducing stolen memory or "
+ "updating the BIOS to fix).\n");
+ dev_priv->has_gem = 0;
+ }
+
dev->driver->get_vblank_counter = i915_get_vblank_counter;
dev->max_vblank_count = 0xffffff; /* only 24 bits of frame count */
if (IS_G4X(dev) || IS_IGDNG(dev)) {
@@ -1165,6 +1214,8 @@
goto out_iomapfree;
}
+ i915_get_mem_freq(dev);
+
/* On the 945G/GM, the chipset reports the MSI capability on the
* integrated graphics even though the support isn't actually there
* according to the published specs. It doesn't appear to function
@@ -1180,6 +1231,7 @@
pci_enable_msi(dev->pdev);
spin_lock_init(&dev_priv->user_irq_lock);
+ spin_lock_init(&dev_priv->error_lock);
dev_priv->user_irq_refcount = 0;
ret = drm_vblank_init(dev, I915_NUM_PIPE);
@@ -1190,7 +1242,7 @@
}
if (drm_core_check_feature(dev, DRIVER_MODESET)) {
- ret = i915_load_modeset_init(dev);
+ ret = i915_load_modeset_init(dev, prealloc_size, agp_size);
if (ret < 0) {
DRM_ERROR("failed to init modeset\n");
goto out_rmmap;
diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c
index 98560e1..fc4b68a 100644
--- a/drivers/gpu/drm/i915/i915_drv.c
+++ b/drivers/gpu/drm/i915/i915_drv.c
@@ -35,6 +35,7 @@
#include "drm_pciids.h"
#include <linux/console.h>
+#include "drm_crtc_helper.h"
static unsigned int i915_modeset = -1;
module_param_named(modeset, i915_modeset, int, 0400);
@@ -57,8 +58,8 @@
struct drm_i915_private *dev_priv = dev->dev_private;
if (!dev || !dev_priv) {
- printk(KERN_ERR "dev: %p, dev_priv: %p\n", dev, dev_priv);
- printk(KERN_ERR "DRM not initialized, aborting suspend.\n");
+ DRM_ERROR("dev: %p, dev_priv: %p\n", dev, dev_priv);
+ DRM_ERROR("DRM not initialized, aborting suspend.\n");
return -ENODEV;
}
@@ -67,8 +68,6 @@
pci_save_state(dev->pdev);
- i915_save_state(dev);
-
/* If KMS is active, we do the leavevt stuff here */
if (drm_core_check_feature(dev, DRIVER_MODESET)) {
if (i915_gem_idle(dev))
@@ -77,6 +76,8 @@
drm_irq_uninstall(dev);
}
+ i915_save_state(dev);
+
intel_opregion_free(dev, 1);
if (state.event == PM_EVENT_SUSPEND) {
@@ -115,6 +116,10 @@
drm_irq_install(dev);
}
+ if (drm_core_check_feature(dev, DRIVER_MODESET)) {
+ /* Resume the modeset for every activated CRTC */
+ drm_helper_resume_force_mode(dev);
+ }
return ret;
}
diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index 7a84f04..d087528 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -133,6 +133,22 @@
u8 initialized;
};
+struct drm_i915_error_state {
+ u32 eir;
+ u32 pgtbl_er;
+ u32 pipeastat;
+ u32 pipebstat;
+ u32 ipeir;
+ u32 ipehr;
+ u32 instdone;
+ u32 acthd;
+ u32 instpm;
+ u32 instps;
+ u32 instdone1;
+ u32 seqno;
+ struct timeval time;
+};
+
typedef struct drm_i915_private {
struct drm_device *dev;
@@ -209,6 +225,11 @@
int fence_reg_start; /* 4 if userland hasn't ioctl'd us yet */
int num_fence_regs; /* 8 on pre-965, 16 otherwise */
+ unsigned int fsb_freq, mem_freq;
+
+ spinlock_t error_lock;
+ struct drm_i915_error_state *first_error;
+
/* Register state */
u8 saveLBB;
u32 saveDSPACNTR;
@@ -306,6 +327,17 @@
u32 saveCURBPOS;
u32 saveCURBBASE;
u32 saveCURSIZE;
+ u32 saveDP_B;
+ u32 saveDP_C;
+ u32 saveDP_D;
+ u32 savePIPEA_GMCH_DATA_M;
+ u32 savePIPEB_GMCH_DATA_M;
+ u32 savePIPEA_GMCH_DATA_N;
+ u32 savePIPEB_GMCH_DATA_N;
+ u32 savePIPEA_DP_LINK_M;
+ u32 savePIPEB_DP_LINK_M;
+ u32 savePIPEA_DP_LINK_N;
+ u32 savePIPEB_DP_LINK_N;
struct {
struct drm_mm gtt_space;
@@ -457,9 +489,6 @@
*/
int fence_reg;
- /** Boolean whether this object has a valid gtt offset. */
- int gtt_bound;
-
/** How many users have pinned this object in GTT space */
int pin_count;
@@ -644,6 +673,7 @@
int i915_gem_object_pin(struct drm_gem_object *obj, uint32_t alignment);
void i915_gem_object_unpin(struct drm_gem_object *obj);
int i915_gem_object_unbind(struct drm_gem_object *obj);
+void i915_gem_release_mmap(struct drm_gem_object *obj);
void i915_gem_lastclose(struct drm_device *dev);
uint32_t i915_get_gem_seqno(struct drm_device *dev);
int i915_gem_object_get_fence_reg(struct drm_gem_object *obj);
@@ -857,7 +887,10 @@
#define HAS_128_BYTE_Y_TILING(dev) (IS_I9XX(dev) && !(IS_I915G(dev) || \
IS_I915GM(dev)))
#define SUPPORTS_INTEGRATED_HDMI(dev) (IS_G4X(dev) || IS_IGDNG(dev))
+#define SUPPORTS_INTEGRATED_DP(dev) (IS_G4X(dev) || IS_IGDNG(dev))
#define I915_HAS_HOTPLUG(dev) (IS_I945G(dev) || IS_I945GM(dev) || IS_I965G(dev))
+/* dsparb controlled by hw only */
+#define DSPARB_HWCONTROL(dev) (IS_G4X(dev) || IS_IGDNG(dev))
#define PRIMARY_RINGBUFFER_SIZE (128*1024)
diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c
index fd2b8bd..5bf4203 100644
--- a/drivers/gpu/drm/i915/i915_gem.c
+++ b/drivers/gpu/drm/i915/i915_gem.c
@@ -1006,7 +1006,7 @@
mutex_lock(&dev->struct_mutex);
#if WATCH_BUF
- DRM_INFO("set_domain_ioctl %p(%d), %08x %08x\n",
+ DRM_INFO("set_domain_ioctl %p(%zd), %08x %08x\n",
obj, obj->size, read_domains, write_domain);
#endif
if (read_domains & I915_GEM_DOMAIN_GTT) {
@@ -1050,7 +1050,7 @@
}
#if WATCH_BUF
- DRM_INFO("%s: sw_finish %d (%p %d)\n",
+ DRM_INFO("%s: sw_finish %d (%p %zd)\n",
__func__, args->handle, obj, obj->size);
#endif
obj_priv = obj->driver_private;
@@ -1252,6 +1252,31 @@
return ret;
}
+/**
+ * i915_gem_release_mmap - remove physical page mappings
+ * @obj: obj in question
+ *
+ * Preserve the reservation of the mmaping with the DRM core code, but
+ * relinquish ownership of the pages back to the system.
+ *
+ * It is vital that we remove the page mapping if we have mapped a tiled
+ * object through the GTT and then lose the fence register due to
+ * resource pressure. Similarly if the object has been moved out of the
+ * aperture, than pages mapped into userspace must be revoked. Removing the
+ * mapping will then trigger a page fault on the next user access, allowing
+ * fixup by i915_gem_fault().
+ */
+void
+i915_gem_release_mmap(struct drm_gem_object *obj)
+{
+ struct drm_device *dev = obj->dev;
+ struct drm_i915_gem_object *obj_priv = obj->driver_private;
+
+ if (dev->dev_mapping)
+ unmap_mapping_range(dev->dev_mapping,
+ obj_priv->mmap_offset, obj->size, 1);
+}
+
static void
i915_gem_free_mmap_offset(struct drm_gem_object *obj)
{
@@ -1861,7 +1886,6 @@
{
struct drm_device *dev = obj->dev;
struct drm_i915_gem_object *obj_priv = obj->driver_private;
- loff_t offset;
int ret = 0;
#if WATCH_BUF
@@ -1898,9 +1922,7 @@
BUG_ON(obj_priv->active);
/* blow away mappings if mapped through GTT */
- offset = ((loff_t) obj->map_list.hash.key) << PAGE_SHIFT;
- if (dev->dev_mapping)
- unmap_mapping_range(dev->dev_mapping, offset, obj->size, 1);
+ i915_gem_release_mmap(obj);
if (obj_priv->fence_reg != I915_FENCE_REG_NONE)
i915_gem_clear_fence_reg(obj);
@@ -2222,7 +2244,6 @@
/* None available, try to steal one or wait for a user to finish */
if (i == dev_priv->num_fence_regs) {
uint32_t seqno = dev_priv->mm.next_gem_seqno;
- loff_t offset;
if (avail == 0)
return -ENOSPC;
@@ -2274,10 +2295,7 @@
* Zap this virtual mapping so we can set up a fence again
* for this object next time we need it.
*/
- offset = ((loff_t) reg->obj->map_list.hash.key) << PAGE_SHIFT;
- if (dev->dev_mapping)
- unmap_mapping_range(dev->dev_mapping, offset,
- reg->obj->size, 1);
+ i915_gem_release_mmap(reg->obj);
old_obj_priv->fence_reg = I915_FENCE_REG_NONE;
}
@@ -2423,7 +2441,7 @@
}
#if WATCH_BUF
- DRM_INFO("Binding object of size %d at 0x%08x\n",
+ DRM_INFO("Binding object of size %zd at 0x%08x\n",
obj->size, obj_priv->gtt_offset);
#endif
ret = i915_gem_object_get_pages(obj);
@@ -4227,6 +4245,7 @@
void
i915_gem_load(struct drm_device *dev)
{
+ int i;
drm_i915_private_t *dev_priv = dev->dev_private;
spin_lock_init(&dev_priv->mm.active_list_lock);
@@ -4246,6 +4265,18 @@
else
dev_priv->num_fence_regs = 8;
+ /* Initialize fence registers to zero */
+ if (IS_I965G(dev)) {
+ for (i = 0; i < 16; i++)
+ I915_WRITE64(FENCE_REG_965_0 + (i * 8), 0);
+ } else {
+ for (i = 0; i < 8; i++)
+ I915_WRITE(FENCE_REG_830_0 + (i * 4), 0);
+ if (IS_I945G(dev) || IS_I945GM(dev) || IS_G33(dev))
+ for (i = 0; i < 8; i++)
+ I915_WRITE(FENCE_REG_945_8 + (i * 4), 0);
+ }
+
i915_gem_detect_bit_6_swizzle(dev);
}
diff --git a/drivers/gpu/drm/i915/i915_gem_debug.c b/drivers/gpu/drm/i915/i915_gem_debug.c
index 8d0b943..e602614 100644
--- a/drivers/gpu/drm/i915/i915_gem_debug.c
+++ b/drivers/gpu/drm/i915/i915_gem_debug.c
@@ -87,7 +87,7 @@
chunk_len = page_len - chunk;
if (chunk_len > 128)
chunk_len = 128;
- i915_gem_dump_page(obj_priv->page_list[page],
+ i915_gem_dump_page(obj_priv->pages[page],
chunk, chunk + chunk_len,
obj_priv->gtt_offset +
page * PAGE_SIZE,
@@ -143,7 +143,7 @@
uint32_t *backing_map = NULL;
int bad_count = 0;
- DRM_INFO("%s: checking coherency of object %p@0x%08x (%d, %dkb):\n",
+ DRM_INFO("%s: checking coherency of object %p@0x%08x (%d, %zdkb):\n",
__func__, obj, obj_priv->gtt_offset, handle,
obj->size / 1024);
@@ -157,7 +157,7 @@
for (page = 0; page < obj->size / PAGE_SIZE; page++) {
int i;
- backing_map = kmap_atomic(obj_priv->page_list[page], KM_USER0);
+ backing_map = kmap_atomic(obj_priv->pages[page], KM_USER0);
if (backing_map == NULL) {
DRM_ERROR("failed to map backing page\n");
diff --git a/drivers/gpu/drm/i915/i915_gem_debugfs.c b/drivers/gpu/drm/i915/i915_gem_debugfs.c
index 28146e4..9a44bfc 100644
--- a/drivers/gpu/drm/i915/i915_gem_debugfs.c
+++ b/drivers/gpu/drm/i915/i915_gem_debugfs.c
@@ -75,11 +75,10 @@
case ACTIVE_LIST:
seq_printf(m, "Active:\n");
lock = &dev_priv->mm.active_list_lock;
- spin_lock(lock);
head = &dev_priv->mm.active_list;
break;
case INACTIVE_LIST:
- seq_printf(m, "Inctive:\n");
+ seq_printf(m, "Inactive:\n");
head = &dev_priv->mm.inactive_list;
break;
case FLUSHING_LIST:
@@ -91,6 +90,8 @@
return 0;
}
+ if (lock)
+ spin_lock(lock);
list_for_each_entry(obj_priv, head, list)
{
struct drm_gem_object *obj = obj_priv->obj;
@@ -104,7 +105,10 @@
if (obj->name)
seq_printf(m, " (name: %d)", obj->name);
if (obj_priv->fence_reg != I915_FENCE_REG_NONE)
- seq_printf(m, " (fence: %d)\n", obj_priv->fence_reg);
+ seq_printf(m, " (fence: %d)", obj_priv->fence_reg);
+ if (obj_priv->gtt_space != NULL)
+ seq_printf(m, " (gtt_offset: %08x)", obj_priv->gtt_offset);
+
seq_printf(m, "\n");
}
@@ -323,6 +327,39 @@
return 0;
}
+static int i915_error_state(struct seq_file *m, void *unused)
+{
+ struct drm_info_node *node = (struct drm_info_node *) m->private;
+ struct drm_device *dev = node->minor->dev;
+ drm_i915_private_t *dev_priv = dev->dev_private;
+ struct drm_i915_error_state *error;
+ unsigned long flags;
+
+ spin_lock_irqsave(&dev_priv->error_lock, flags);
+ if (!dev_priv->first_error) {
+ seq_printf(m, "no error state collected\n");
+ goto out;
+ }
+
+ error = dev_priv->first_error;
+
+ seq_printf(m, "EIR: 0x%08x\n", error->eir);
+ seq_printf(m, " PGTBL_ER: 0x%08x\n", error->pgtbl_er);
+ seq_printf(m, " INSTPM: 0x%08x\n", error->instpm);
+ seq_printf(m, " IPEIR: 0x%08x\n", error->ipeir);
+ seq_printf(m, " IPEHR: 0x%08x\n", error->ipehr);
+ seq_printf(m, " INSTDONE: 0x%08x\n", error->instdone);
+ seq_printf(m, " ACTHD: 0x%08x\n", error->acthd);
+ if (IS_I965G(dev)) {
+ seq_printf(m, " INSTPS: 0x%08x\n", error->instps);
+ seq_printf(m, " INSTDONE1: 0x%08x\n", error->instdone1);
+ }
+
+out:
+ spin_unlock_irqrestore(&dev_priv->error_lock, flags);
+
+ return 0;
+}
static struct drm_info_list i915_gem_debugfs_list[] = {
{"i915_gem_active", i915_gem_object_list_info, 0, (void *) ACTIVE_LIST},
@@ -336,6 +373,7 @@
{"i915_ringbuffer_data", i915_ringbuffer_data, 0},
{"i915_ringbuffer_info", i915_ringbuffer_info, 0},
{"i915_batchbuffers", i915_batchbuffer_info, 0},
+ {"i915_error_state", i915_error_state, 0},
};
#define I915_GEM_DEBUGFS_ENTRIES ARRAY_SIZE(i915_gem_debugfs_list)
diff --git a/drivers/gpu/drm/i915/i915_gem_tiling.c b/drivers/gpu/drm/i915/i915_gem_tiling.c
index 5c1ceec..a2d527b 100644
--- a/drivers/gpu/drm/i915/i915_gem_tiling.c
+++ b/drivers/gpu/drm/i915/i915_gem_tiling.c
@@ -114,11 +114,13 @@
mchbar_addr = ((u64)temp_hi << 32) | temp_lo;
/* If ACPI doesn't have it, assume we need to allocate it ourselves */
+#ifdef CONFIG_PNP
if (mchbar_addr &&
pnp_range_reserved(mchbar_addr, mchbar_addr + MCHBAR_SIZE)) {
ret = 0;
goto out_put;
}
+#endif
/* Get some space for it */
ret = pci_bus_alloc_resource(bridge_dev->bus, &dev_priv->mch_res,
@@ -519,6 +521,12 @@
goto err;
}
+ /* If we've changed tiling, GTT-mappings of the object
+ * need to re-fault to ensure that the correct fence register
+ * setup is in place.
+ */
+ i915_gem_release_mmap(obj);
+
obj_priv->tiling_mode = args->tiling_mode;
obj_priv->stride = args->stride;
}
diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c
index b86b7b7..7ba23a6 100644
--- a/drivers/gpu/drm/i915/i915_irq.c
+++ b/drivers/gpu/drm/i915/i915_irq.c
@@ -26,6 +26,7 @@
*
*/
+#include <linux/sysrq.h>
#include "drmP.h"
#include "drm.h"
#include "i915_drm.h"
@@ -41,9 +42,10 @@
* we leave them always unmasked in IMR and then control enabling them through
* PIPESTAT alone.
*/
-#define I915_INTERRUPT_ENABLE_FIX (I915_ASLE_INTERRUPT | \
- I915_DISPLAY_PIPE_A_EVENT_INTERRUPT | \
- I915_DISPLAY_PIPE_B_EVENT_INTERRUPT)
+#define I915_INTERRUPT_ENABLE_FIX (I915_ASLE_INTERRUPT | \
+ I915_DISPLAY_PIPE_A_EVENT_INTERRUPT | \
+ I915_DISPLAY_PIPE_B_EVENT_INTERRUPT | \
+ I915_RENDER_COMMAND_PARSER_ERROR_INTERRUPT)
/** Interrupts that we mask and unmask at runtime. */
#define I915_INTERRUPT_ENABLE_VAR (I915_USER_INTERRUPT)
@@ -232,7 +234,17 @@
drm_i915_private_t *dev_priv = container_of(work, drm_i915_private_t,
hotplug_work);
struct drm_device *dev = dev_priv->dev;
+ struct drm_mode_config *mode_config = &dev->mode_config;
+ struct drm_connector *connector;
+ if (mode_config->num_connector) {
+ list_for_each_entry(connector, &mode_config->connector_list, head) {
+ struct intel_output *intel_output = to_intel_output(connector);
+
+ if (intel_output->hot_plug)
+ (*intel_output->hot_plug) (intel_output);
+ }
+ }
/* Just fire off a uevent and let userspace tell us what to do */
drm_sysfs_hotplug_event(dev);
}
@@ -278,6 +290,47 @@
return ret;
}
+static void i915_capture_error_state(struct drm_device *dev)
+{
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ struct drm_i915_error_state *error;
+ unsigned long flags;
+
+ spin_lock_irqsave(&dev_priv->error_lock, flags);
+ if (dev_priv->first_error)
+ goto out;
+
+ error = kmalloc(sizeof(*error), GFP_ATOMIC);
+ if (!error) {
+ DRM_DEBUG("out ot memory, not capturing error state\n");
+ goto out;
+ }
+
+ error->eir = I915_READ(EIR);
+ error->pgtbl_er = I915_READ(PGTBL_ER);
+ error->pipeastat = I915_READ(PIPEASTAT);
+ error->pipebstat = I915_READ(PIPEBSTAT);
+ error->instpm = I915_READ(INSTPM);
+ if (!IS_I965G(dev)) {
+ error->ipeir = I915_READ(IPEIR);
+ error->ipehr = I915_READ(IPEHR);
+ error->instdone = I915_READ(INSTDONE);
+ error->acthd = I915_READ(ACTHD);
+ } else {
+ error->ipeir = I915_READ(IPEIR_I965);
+ error->ipehr = I915_READ(IPEHR_I965);
+ error->instdone = I915_READ(INSTDONE_I965);
+ error->instps = I915_READ(INSTPS);
+ error->instdone1 = I915_READ(INSTDONE1);
+ error->acthd = I915_READ(ACTHD_I965);
+ }
+
+ dev_priv->first_error = error;
+
+out:
+ spin_unlock_irqrestore(&dev_priv->error_lock, flags);
+}
+
irqreturn_t i915_driver_irq_handler(DRM_IRQ_ARGS)
{
struct drm_device *dev = (struct drm_device *) arg;
@@ -323,11 +376,15 @@
* Clear the PIPE(A|B)STAT regs before the IIR
*/
if (pipea_stats & 0x8000ffff) {
+ if (pipea_stats & PIPE_FIFO_UNDERRUN_STATUS)
+ DRM_DEBUG("pipe a underrun\n");
I915_WRITE(PIPEASTAT, pipea_stats);
irq_received = 1;
}
if (pipeb_stats & 0x8000ffff) {
+ if (pipeb_stats & PIPE_FIFO_UNDERRUN_STATUS)
+ DRM_DEBUG("pipe b underrun\n");
I915_WRITE(PIPEBSTAT, pipeb_stats);
irq_received = 1;
}
@@ -352,6 +409,80 @@
I915_READ(PORT_HOTPLUG_STAT);
}
+ if (iir & I915_RENDER_COMMAND_PARSER_ERROR_INTERRUPT) {
+ u32 eir = I915_READ(EIR);
+
+ i915_capture_error_state(dev);
+
+ printk(KERN_ERR "render error detected, EIR: 0x%08x\n",
+ eir);
+ if (eir & I915_ERROR_PAGE_TABLE) {
+ u32 pgtbl_err = I915_READ(PGTBL_ER);
+ printk(KERN_ERR "page table error\n");
+ printk(KERN_ERR " PGTBL_ER: 0x%08x\n",
+ pgtbl_err);
+ I915_WRITE(PGTBL_ER, pgtbl_err);
+ (void)I915_READ(PGTBL_ER);
+ }
+ if (eir & I915_ERROR_MEMORY_REFRESH) {
+ printk(KERN_ERR "memory refresh error\n");
+ printk(KERN_ERR "PIPEASTAT: 0x%08x\n",
+ pipea_stats);
+ printk(KERN_ERR "PIPEBSTAT: 0x%08x\n",
+ pipeb_stats);
+ /* pipestat has already been acked */
+ }
+ if (eir & I915_ERROR_INSTRUCTION) {
+ printk(KERN_ERR "instruction error\n");
+ printk(KERN_ERR " INSTPM: 0x%08x\n",
+ I915_READ(INSTPM));
+ if (!IS_I965G(dev)) {
+ u32 ipeir = I915_READ(IPEIR);
+
+ printk(KERN_ERR " IPEIR: 0x%08x\n",
+ I915_READ(IPEIR));
+ printk(KERN_ERR " IPEHR: 0x%08x\n",
+ I915_READ(IPEHR));
+ printk(KERN_ERR " INSTDONE: 0x%08x\n",
+ I915_READ(INSTDONE));
+ printk(KERN_ERR " ACTHD: 0x%08x\n",
+ I915_READ(ACTHD));
+ I915_WRITE(IPEIR, ipeir);
+ (void)I915_READ(IPEIR);
+ } else {
+ u32 ipeir = I915_READ(IPEIR_I965);
+
+ printk(KERN_ERR " IPEIR: 0x%08x\n",
+ I915_READ(IPEIR_I965));
+ printk(KERN_ERR " IPEHR: 0x%08x\n",
+ I915_READ(IPEHR_I965));
+ printk(KERN_ERR " INSTDONE: 0x%08x\n",
+ I915_READ(INSTDONE_I965));
+ printk(KERN_ERR " INSTPS: 0x%08x\n",
+ I915_READ(INSTPS));
+ printk(KERN_ERR " INSTDONE1: 0x%08x\n",
+ I915_READ(INSTDONE1));
+ printk(KERN_ERR " ACTHD: 0x%08x\n",
+ I915_READ(ACTHD_I965));
+ I915_WRITE(IPEIR_I965, ipeir);
+ (void)I915_READ(IPEIR_I965);
+ }
+ }
+
+ I915_WRITE(EIR, eir);
+ (void)I915_READ(EIR);
+ eir = I915_READ(EIR);
+ if (eir) {
+ /*
+ * some errors might have become stuck,
+ * mask them.
+ */
+ DRM_ERROR("EIR stuck: 0x%08x, masking\n", eir);
+ I915_WRITE(EMR, I915_READ(EMR) | eir);
+ I915_WRITE(IIR, I915_RENDER_COMMAND_PARSER_ERROR_INTERRUPT);
+ }
+ }
+
I915_WRITE(IIR, iir);
new_iir = I915_READ(IIR); /* Flush posted writes */
@@ -722,6 +853,7 @@
{
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
u32 enable_mask = I915_INTERRUPT_ENABLE_FIX | I915_INTERRUPT_ENABLE_VAR;
+ u32 error_mask;
DRM_INIT_WAITQUEUE(&dev_priv->irq_queue);
@@ -758,6 +890,21 @@
i915_enable_irq(dev_priv, I915_DISPLAY_PORT_INTERRUPT);
}
+ /*
+ * Enable some error detection, note the instruction error mask
+ * bit is reserved, so we leave it masked.
+ */
+ if (IS_G4X(dev)) {
+ error_mask = ~(GM45_ERROR_PAGE_TABLE |
+ GM45_ERROR_MEM_PRIV |
+ GM45_ERROR_CP_PRIV |
+ I915_ERROR_MEMORY_REFRESH);
+ } else {
+ error_mask = ~(I915_ERROR_PAGE_TABLE |
+ I915_ERROR_MEMORY_REFRESH);
+ }
+ I915_WRITE(EMR, error_mask);
+
/* Disable pipe interrupt enables, clear pending pipe status */
I915_WRITE(PIPEASTAT, I915_READ(PIPEASTAT) & 0x8000ffff);
I915_WRITE(PIPEBSTAT, I915_READ(PIPEBSTAT) & 0x8000ffff);
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index f6237a0..6c08584 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -206,6 +206,7 @@
/*
* Instruction and interrupt control regs
*/
+#define PGTBL_ER 0x02024
#define PRB0_TAIL 0x02030
#define PRB0_HEAD 0x02034
#define PRB0_START 0x02038
@@ -226,11 +227,18 @@
#define PRB1_HEAD 0x02044 /* 915+ only */
#define PRB1_START 0x02048 /* 915+ only */
#define PRB1_CTL 0x0204c /* 915+ only */
+#define IPEIR_I965 0x02064
+#define IPEHR_I965 0x02068
+#define INSTDONE_I965 0x0206c
+#define INSTPS 0x02070 /* 965+ only */
+#define INSTDONE1 0x0207c /* 965+ only */
#define ACTHD_I965 0x02074
#define HWS_PGA 0x02080
#define HWS_ADDRESS_MASK 0xfffff000
#define HWS_START_ADDRESS_SHIFT 4
#define IPEIR 0x02088
+#define IPEHR 0x0208c
+#define INSTDONE 0x02090
#define NOPID 0x02094
#define HWSTAM 0x02098
#define SCPD0 0x0209c /* 915+ only */
@@ -258,10 +266,22 @@
#define EIR 0x020b0
#define EMR 0x020b4
#define ESR 0x020b8
+#define GM45_ERROR_PAGE_TABLE (1<<5)
+#define GM45_ERROR_MEM_PRIV (1<<4)
+#define I915_ERROR_PAGE_TABLE (1<<4)
+#define GM45_ERROR_CP_PRIV (1<<3)
+#define I915_ERROR_MEMORY_REFRESH (1<<1)
+#define I915_ERROR_INSTRUCTION (1<<0)
#define INSTPM 0x020c0
#define ACTHD 0x020c8
#define FW_BLC 0x020d8
+#define FW_BLC2 0x020dc
#define FW_BLC_SELF 0x020e0 /* 915+ only */
+#define FW_BLC_SELF_EN (1<<15)
+#define MM_BURST_LENGTH 0x00700000
+#define MM_FIFO_WATERMARK 0x0001F000
+#define LM_BURST_LENGTH 0x00000700
+#define LM_FIFO_WATERMARK 0x0000001F
#define MI_ARB_STATE 0x020e4 /* 915+ only */
#define CACHE_MODE_0 0x02120 /* 915+ only */
#define CM0_MASK_SHIFT 16
@@ -569,6 +589,23 @@
#define C0DRB3 0x10206
#define C1DRB3 0x10606
+/* Clocking configuration register */
+#define CLKCFG 0x10c00
+#define CLKCFG_FSB_400 (5 << 0) /* hrawclk 100 */
+#define CLKCFG_FSB_533 (1 << 0) /* hrawclk 133 */
+#define CLKCFG_FSB_667 (3 << 0) /* hrawclk 166 */
+#define CLKCFG_FSB_800 (2 << 0) /* hrawclk 200 */
+#define CLKCFG_FSB_1067 (6 << 0) /* hrawclk 266 */
+#define CLKCFG_FSB_1333 (7 << 0) /* hrawclk 333 */
+/* Note, below two are guess */
+#define CLKCFG_FSB_1600 (4 << 0) /* hrawclk 400 */
+#define CLKCFG_FSB_1600_ALT (0 << 0) /* hrawclk 400 */
+#define CLKCFG_FSB_MASK (7 << 0)
+#define CLKCFG_MEM_533 (1 << 4)
+#define CLKCFG_MEM_667 (2 << 4)
+#define CLKCFG_MEM_800 (3 << 4)
+#define CLKCFG_MEM_MASK (7 << 4)
+
/** GM965 GM45 render standby register */
#define MCHBAR_RENDER_STANDBY 0x111B8
@@ -834,9 +871,25 @@
#define HORIZ_INTERP_MASK (3 << 6)
#define HORIZ_AUTO_SCALE (1 << 5)
#define PANEL_8TO6_DITHER_ENABLE (1 << 3)
+#define PFIT_FILTER_FUZZY (0 << 24)
+#define PFIT_SCALING_AUTO (0 << 26)
+#define PFIT_SCALING_PROGRAMMED (1 << 26)
+#define PFIT_SCALING_PILLAR (2 << 26)
+#define PFIT_SCALING_LETTER (3 << 26)
#define PFIT_PGM_RATIOS 0x61234
#define PFIT_VERT_SCALE_MASK 0xfff00000
#define PFIT_HORIZ_SCALE_MASK 0x0000fff0
+/* Pre-965 */
+#define PFIT_VERT_SCALE_SHIFT 20
+#define PFIT_VERT_SCALE_MASK 0xfff00000
+#define PFIT_HORIZ_SCALE_SHIFT 4
+#define PFIT_HORIZ_SCALE_MASK 0x0000fff0
+/* 965+ */
+#define PFIT_VERT_SCALE_SHIFT_965 16
+#define PFIT_VERT_SCALE_MASK_965 0x1fff0000
+#define PFIT_HORIZ_SCALE_SHIFT_965 0
+#define PFIT_HORIZ_SCALE_MASK_965 0x00001fff
+
#define PFIT_AUTO_RATIOS 0x61238
/* Backlight control */
@@ -1552,6 +1605,34 @@
#define DSPARB_CSTART_SHIFT 7
#define DSPARB_BSTART_MASK (0x7f)
#define DSPARB_BSTART_SHIFT 0
+#define DSPARB_BEND_SHIFT 9 /* on 855 */
+#define DSPARB_AEND_SHIFT 0
+
+#define DSPFW1 0x70034
+#define DSPFW2 0x70038
+#define DSPFW3 0x7003c
+#define IGD_SELF_REFRESH_EN (1<<30)
+
+/* FIFO watermark sizes etc */
+#define I915_FIFO_LINE_SIZE 64
+#define I830_FIFO_LINE_SIZE 32
+#define I945_FIFO_SIZE 127 /* 945 & 965 */
+#define I915_FIFO_SIZE 95
+#define I855GM_FIFO_SIZE 255
+#define I830_FIFO_SIZE 95
+#define I915_MAX_WM 0x3f
+
+#define IGD_DISPLAY_FIFO 512 /* in 64byte unit */
+#define IGD_FIFO_LINE_SIZE 64
+#define IGD_MAX_WM 0x1ff
+#define IGD_DFT_WM 0x3f
+#define IGD_DFT_HPLLOFF_WM 0
+#define IGD_GUARD_WM 10
+#define IGD_CURSOR_FIFO 64
+#define IGD_CURSOR_MAX_WM 0x3f
+#define IGD_CURSOR_DFT_WM 0
+#define IGD_CURSOR_GUARD_WM 5
+
/*
* The two pipe frame counter registers are not synchronized, so
* reading a stable value is somewhat tricky. The following code
diff --git a/drivers/gpu/drm/i915/i915_suspend.c b/drivers/gpu/drm/i915/i915_suspend.c
index a98e283..9e1d16e 100644
--- a/drivers/gpu/drm/i915/i915_suspend.c
+++ b/drivers/gpu/drm/i915/i915_suspend.c
@@ -222,23 +222,12 @@
I915_WRITE8(VGA_DACMASK, dev_priv->saveDACMASK);
}
-int i915_save_state(struct drm_device *dev)
+static void i915_save_modeset_reg(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
- int i;
- pci_read_config_byte(dev->pdev, LBB, &dev_priv->saveLBB);
-
- /* Render Standby */
- if (IS_I965G(dev) && IS_MOBILE(dev))
- dev_priv->saveRENDERSTANDBY = I915_READ(MCHBAR_RENDER_STANDBY);
-
- /* Hardware status page */
- dev_priv->saveHWS = I915_READ(HWS_PGA);
-
- /* Display arbitration control */
- dev_priv->saveDSPARB = I915_READ(DSPARB);
-
+ if (drm_core_check_feature(dev, DRIVER_MODESET))
+ return;
/* Pipe & plane A info */
dev_priv->savePIPEACONF = I915_READ(PIPEACONF);
dev_priv->savePIPEASRC = I915_READ(PIPEASRC);
@@ -294,116 +283,14 @@
}
i915_save_palette(dev, PIPE_B);
dev_priv->savePIPEBSTAT = I915_READ(PIPEBSTAT);
-
- /* Cursor state */
- dev_priv->saveCURACNTR = I915_READ(CURACNTR);
- dev_priv->saveCURAPOS = I915_READ(CURAPOS);
- dev_priv->saveCURABASE = I915_READ(CURABASE);
- dev_priv->saveCURBCNTR = I915_READ(CURBCNTR);
- dev_priv->saveCURBPOS = I915_READ(CURBPOS);
- dev_priv->saveCURBBASE = I915_READ(CURBBASE);
- if (!IS_I9XX(dev))
- dev_priv->saveCURSIZE = I915_READ(CURSIZE);
-
- /* CRT state */
- dev_priv->saveADPA = I915_READ(ADPA);
-
- /* LVDS state */
- dev_priv->savePP_CONTROL = I915_READ(PP_CONTROL);
- dev_priv->savePFIT_PGM_RATIOS = I915_READ(PFIT_PGM_RATIOS);
- dev_priv->saveBLC_PWM_CTL = I915_READ(BLC_PWM_CTL);
- if (IS_I965G(dev))
- dev_priv->saveBLC_PWM_CTL2 = I915_READ(BLC_PWM_CTL2);
- if (IS_MOBILE(dev) && !IS_I830(dev))
- dev_priv->saveLVDS = I915_READ(LVDS);
- if (!IS_I830(dev) && !IS_845G(dev))
- dev_priv->savePFIT_CONTROL = I915_READ(PFIT_CONTROL);
- dev_priv->savePP_ON_DELAYS = I915_READ(PP_ON_DELAYS);
- dev_priv->savePP_OFF_DELAYS = I915_READ(PP_OFF_DELAYS);
- dev_priv->savePP_DIVISOR = I915_READ(PP_DIVISOR);
-
- /* FIXME: save TV & SDVO state */
-
- /* FBC state */
- dev_priv->saveFBC_CFB_BASE = I915_READ(FBC_CFB_BASE);
- dev_priv->saveFBC_LL_BASE = I915_READ(FBC_LL_BASE);
- dev_priv->saveFBC_CONTROL2 = I915_READ(FBC_CONTROL2);
- dev_priv->saveFBC_CONTROL = I915_READ(FBC_CONTROL);
-
- /* Interrupt state */
- dev_priv->saveIIR = I915_READ(IIR);
- dev_priv->saveIER = I915_READ(IER);
- dev_priv->saveIMR = I915_READ(IMR);
-
- /* VGA state */
- dev_priv->saveVGA0 = I915_READ(VGA0);
- dev_priv->saveVGA1 = I915_READ(VGA1);
- dev_priv->saveVGA_PD = I915_READ(VGA_PD);
- dev_priv->saveVGACNTRL = I915_READ(VGACNTRL);
-
- /* Clock gating state */
- dev_priv->saveD_STATE = I915_READ(D_STATE);
- dev_priv->saveCG_2D_DIS = I915_READ(CG_2D_DIS);
-
- /* Cache mode state */
- dev_priv->saveCACHE_MODE_0 = I915_READ(CACHE_MODE_0);
-
- /* Memory Arbitration state */
- dev_priv->saveMI_ARB_STATE = I915_READ(MI_ARB_STATE);
-
- /* Scratch space */
- for (i = 0; i < 16; i++) {
- dev_priv->saveSWF0[i] = I915_READ(SWF00 + (i << 2));
- dev_priv->saveSWF1[i] = I915_READ(SWF10 + (i << 2));
- }
- for (i = 0; i < 3; i++)
- dev_priv->saveSWF2[i] = I915_READ(SWF30 + (i << 2));
-
- /* Fences */
- if (IS_I965G(dev)) {
- for (i = 0; i < 16; i++)
- dev_priv->saveFENCE[i] = I915_READ64(FENCE_REG_965_0 + (i * 8));
- } else {
- for (i = 0; i < 8; i++)
- dev_priv->saveFENCE[i] = I915_READ(FENCE_REG_830_0 + (i * 4));
-
- if (IS_I945G(dev) || IS_I945GM(dev) || IS_G33(dev))
- for (i = 0; i < 8; i++)
- dev_priv->saveFENCE[i+8] = I915_READ(FENCE_REG_945_8 + (i * 4));
- }
- i915_save_vga(dev);
-
- return 0;
+ return;
}
-
-int i915_restore_state(struct drm_device *dev)
+static void i915_restore_modeset_reg(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
- int i;
- pci_write_config_byte(dev->pdev, LBB, dev_priv->saveLBB);
-
- /* Render Standby */
- if (IS_I965G(dev) && IS_MOBILE(dev))
- I915_WRITE(MCHBAR_RENDER_STANDBY, dev_priv->saveRENDERSTANDBY);
-
- /* Hardware status page */
- I915_WRITE(HWS_PGA, dev_priv->saveHWS);
-
- /* Display arbitration */
- I915_WRITE(DSPARB, dev_priv->saveDSPARB);
-
- /* Fences */
- if (IS_I965G(dev)) {
- for (i = 0; i < 16; i++)
- I915_WRITE64(FENCE_REG_965_0 + (i * 8), dev_priv->saveFENCE[i]);
- } else {
- for (i = 0; i < 8; i++)
- I915_WRITE(FENCE_REG_830_0 + (i * 4), dev_priv->saveFENCE[i]);
- if (IS_I945G(dev) || IS_I945GM(dev) || IS_G33(dev))
- for (i = 0; i < 8; i++)
- I915_WRITE(FENCE_REG_945_8 + (i * 4), dev_priv->saveFENCE[i+8]);
- }
+ if (drm_core_check_feature(dev, DRIVER_MODESET))
+ return;
/* Pipe & plane A info */
/* Prime the clock */
@@ -490,6 +377,166 @@
I915_WRITE(DSPBCNTR, dev_priv->saveDSPBCNTR);
I915_WRITE(DSPBADDR, I915_READ(DSPBADDR));
+ return;
+}
+int i915_save_state(struct drm_device *dev)
+{
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ int i;
+
+ pci_read_config_byte(dev->pdev, LBB, &dev_priv->saveLBB);
+
+ /* Render Standby */
+ if (IS_I965G(dev) && IS_MOBILE(dev))
+ dev_priv->saveRENDERSTANDBY = I915_READ(MCHBAR_RENDER_STANDBY);
+
+ /* Hardware status page */
+ dev_priv->saveHWS = I915_READ(HWS_PGA);
+
+ /* Display arbitration control */
+ dev_priv->saveDSPARB = I915_READ(DSPARB);
+
+ /* This is only meaningful in non-KMS mode */
+ /* Don't save them in KMS mode */
+ i915_save_modeset_reg(dev);
+ /* Cursor state */
+ dev_priv->saveCURACNTR = I915_READ(CURACNTR);
+ dev_priv->saveCURAPOS = I915_READ(CURAPOS);
+ dev_priv->saveCURABASE = I915_READ(CURABASE);
+ dev_priv->saveCURBCNTR = I915_READ(CURBCNTR);
+ dev_priv->saveCURBPOS = I915_READ(CURBPOS);
+ dev_priv->saveCURBBASE = I915_READ(CURBBASE);
+ if (!IS_I9XX(dev))
+ dev_priv->saveCURSIZE = I915_READ(CURSIZE);
+
+ /* CRT state */
+ dev_priv->saveADPA = I915_READ(ADPA);
+
+ /* LVDS state */
+ dev_priv->savePP_CONTROL = I915_READ(PP_CONTROL);
+ dev_priv->savePFIT_PGM_RATIOS = I915_READ(PFIT_PGM_RATIOS);
+ dev_priv->saveBLC_PWM_CTL = I915_READ(BLC_PWM_CTL);
+ if (IS_I965G(dev))
+ dev_priv->saveBLC_PWM_CTL2 = I915_READ(BLC_PWM_CTL2);
+ if (IS_MOBILE(dev) && !IS_I830(dev))
+ dev_priv->saveLVDS = I915_READ(LVDS);
+ if (!IS_I830(dev) && !IS_845G(dev))
+ dev_priv->savePFIT_CONTROL = I915_READ(PFIT_CONTROL);
+ dev_priv->savePP_ON_DELAYS = I915_READ(PP_ON_DELAYS);
+ dev_priv->savePP_OFF_DELAYS = I915_READ(PP_OFF_DELAYS);
+ dev_priv->savePP_DIVISOR = I915_READ(PP_DIVISOR);
+
+ /* Display Port state */
+ if (SUPPORTS_INTEGRATED_DP(dev)) {
+ dev_priv->saveDP_B = I915_READ(DP_B);
+ dev_priv->saveDP_C = I915_READ(DP_C);
+ dev_priv->saveDP_D = I915_READ(DP_D);
+ dev_priv->savePIPEA_GMCH_DATA_M = I915_READ(PIPEA_GMCH_DATA_M);
+ dev_priv->savePIPEB_GMCH_DATA_M = I915_READ(PIPEB_GMCH_DATA_M);
+ dev_priv->savePIPEA_GMCH_DATA_N = I915_READ(PIPEA_GMCH_DATA_N);
+ dev_priv->savePIPEB_GMCH_DATA_N = I915_READ(PIPEB_GMCH_DATA_N);
+ dev_priv->savePIPEA_DP_LINK_M = I915_READ(PIPEA_DP_LINK_M);
+ dev_priv->savePIPEB_DP_LINK_M = I915_READ(PIPEB_DP_LINK_M);
+ dev_priv->savePIPEA_DP_LINK_N = I915_READ(PIPEA_DP_LINK_N);
+ dev_priv->savePIPEB_DP_LINK_N = I915_READ(PIPEB_DP_LINK_N);
+ }
+ /* FIXME: save TV & SDVO state */
+
+ /* FBC state */
+ dev_priv->saveFBC_CFB_BASE = I915_READ(FBC_CFB_BASE);
+ dev_priv->saveFBC_LL_BASE = I915_READ(FBC_LL_BASE);
+ dev_priv->saveFBC_CONTROL2 = I915_READ(FBC_CONTROL2);
+ dev_priv->saveFBC_CONTROL = I915_READ(FBC_CONTROL);
+
+ /* Interrupt state */
+ dev_priv->saveIIR = I915_READ(IIR);
+ dev_priv->saveIER = I915_READ(IER);
+ dev_priv->saveIMR = I915_READ(IMR);
+
+ /* VGA state */
+ dev_priv->saveVGA0 = I915_READ(VGA0);
+ dev_priv->saveVGA1 = I915_READ(VGA1);
+ dev_priv->saveVGA_PD = I915_READ(VGA_PD);
+ dev_priv->saveVGACNTRL = I915_READ(VGACNTRL);
+
+ /* Clock gating state */
+ dev_priv->saveD_STATE = I915_READ(D_STATE);
+ dev_priv->saveCG_2D_DIS = I915_READ(CG_2D_DIS);
+
+ /* Cache mode state */
+ dev_priv->saveCACHE_MODE_0 = I915_READ(CACHE_MODE_0);
+
+ /* Memory Arbitration state */
+ dev_priv->saveMI_ARB_STATE = I915_READ(MI_ARB_STATE);
+
+ /* Scratch space */
+ for (i = 0; i < 16; i++) {
+ dev_priv->saveSWF0[i] = I915_READ(SWF00 + (i << 2));
+ dev_priv->saveSWF1[i] = I915_READ(SWF10 + (i << 2));
+ }
+ for (i = 0; i < 3; i++)
+ dev_priv->saveSWF2[i] = I915_READ(SWF30 + (i << 2));
+
+ /* Fences */
+ if (IS_I965G(dev)) {
+ for (i = 0; i < 16; i++)
+ dev_priv->saveFENCE[i] = I915_READ64(FENCE_REG_965_0 + (i * 8));
+ } else {
+ for (i = 0; i < 8; i++)
+ dev_priv->saveFENCE[i] = I915_READ(FENCE_REG_830_0 + (i * 4));
+
+ if (IS_I945G(dev) || IS_I945GM(dev) || IS_G33(dev))
+ for (i = 0; i < 8; i++)
+ dev_priv->saveFENCE[i+8] = I915_READ(FENCE_REG_945_8 + (i * 4));
+ }
+ i915_save_vga(dev);
+
+ return 0;
+}
+
+int i915_restore_state(struct drm_device *dev)
+{
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ int i;
+
+ pci_write_config_byte(dev->pdev, LBB, dev_priv->saveLBB);
+
+ /* Render Standby */
+ if (IS_I965G(dev) && IS_MOBILE(dev))
+ I915_WRITE(MCHBAR_RENDER_STANDBY, dev_priv->saveRENDERSTANDBY);
+
+ /* Hardware status page */
+ I915_WRITE(HWS_PGA, dev_priv->saveHWS);
+
+ /* Display arbitration */
+ I915_WRITE(DSPARB, dev_priv->saveDSPARB);
+
+ /* Fences */
+ if (IS_I965G(dev)) {
+ for (i = 0; i < 16; i++)
+ I915_WRITE64(FENCE_REG_965_0 + (i * 8), dev_priv->saveFENCE[i]);
+ } else {
+ for (i = 0; i < 8; i++)
+ I915_WRITE(FENCE_REG_830_0 + (i * 4), dev_priv->saveFENCE[i]);
+ if (IS_I945G(dev) || IS_I945GM(dev) || IS_G33(dev))
+ for (i = 0; i < 8; i++)
+ I915_WRITE(FENCE_REG_945_8 + (i * 4), dev_priv->saveFENCE[i+8]);
+ }
+
+ /* Display port ratios (must be done before clock is set) */
+ if (SUPPORTS_INTEGRATED_DP(dev)) {
+ I915_WRITE(PIPEA_GMCH_DATA_M, dev_priv->savePIPEA_GMCH_DATA_M);
+ I915_WRITE(PIPEB_GMCH_DATA_M, dev_priv->savePIPEB_GMCH_DATA_M);
+ I915_WRITE(PIPEA_GMCH_DATA_N, dev_priv->savePIPEA_GMCH_DATA_N);
+ I915_WRITE(PIPEB_GMCH_DATA_N, dev_priv->savePIPEB_GMCH_DATA_N);
+ I915_WRITE(PIPEA_DP_LINK_M, dev_priv->savePIPEA_DP_LINK_M);
+ I915_WRITE(PIPEB_DP_LINK_M, dev_priv->savePIPEB_DP_LINK_M);
+ I915_WRITE(PIPEA_DP_LINK_N, dev_priv->savePIPEA_DP_LINK_N);
+ I915_WRITE(PIPEB_DP_LINK_N, dev_priv->savePIPEB_DP_LINK_N);
+ }
+ /* This is only meaningful in non-KMS mode */
+ /* Don't restore them in KMS mode */
+ i915_restore_modeset_reg(dev);
/* Cursor state */
I915_WRITE(CURAPOS, dev_priv->saveCURAPOS);
I915_WRITE(CURACNTR, dev_priv->saveCURACNTR);
@@ -518,6 +565,12 @@
I915_WRITE(PP_DIVISOR, dev_priv->savePP_DIVISOR);
I915_WRITE(PP_CONTROL, dev_priv->savePP_CONTROL);
+ /* Display Port state */
+ if (SUPPORTS_INTEGRATED_DP(dev)) {
+ I915_WRITE(DP_B, dev_priv->saveDP_B);
+ I915_WRITE(DP_C, dev_priv->saveDP_C);
+ I915_WRITE(DP_D, dev_priv->saveDP_D);
+ }
/* FIXME: restore TV & SDVO state */
/* FBC info */
diff --git a/drivers/gpu/drm/i915/intel_bios.c b/drivers/gpu/drm/i915/intel_bios.c
index cdd126d..7cc4471 100644
--- a/drivers/gpu/drm/i915/intel_bios.c
+++ b/drivers/gpu/drm/i915/intel_bios.c
@@ -97,11 +97,14 @@
parse_lfp_panel_data(struct drm_i915_private *dev_priv,
struct bdb_header *bdb)
{
+ struct drm_device *dev = dev_priv->dev;
struct bdb_lvds_options *lvds_options;
struct bdb_lvds_lfp_data *lvds_lfp_data;
+ struct bdb_lvds_lfp_data_ptrs *lvds_lfp_data_ptrs;
struct bdb_lvds_lfp_data_entry *entry;
struct lvds_dvo_timing *dvo_timing;
struct drm_display_mode *panel_fixed_mode;
+ int lfp_data_size;
/* Defaults if we can't find VBT info */
dev_priv->lvds_dither = 0;
@@ -119,10 +122,25 @@
if (!lvds_lfp_data)
return;
+ lvds_lfp_data_ptrs = find_section(bdb, BDB_LVDS_LFP_DATA_PTRS);
+ if (!lvds_lfp_data_ptrs)
+ return;
+
dev_priv->lvds_vbt = 1;
- entry = &lvds_lfp_data->data[lvds_options->panel_type];
- dvo_timing = &entry->dvo_timing;
+ lfp_data_size = lvds_lfp_data_ptrs->ptr[1].dvo_timing_offset -
+ lvds_lfp_data_ptrs->ptr[0].dvo_timing_offset;
+ entry = (struct bdb_lvds_lfp_data_entry *)
+ ((uint8_t *)lvds_lfp_data->data + (lfp_data_size *
+ lvds_options->panel_type));
+
+ /* On IGDNG mobile, LVDS data block removes panel fitting registers.
+ So dec 2 dword from dvo_timing offset */
+ if (IS_IGDNG(dev))
+ dvo_timing = (struct lvds_dvo_timing *)
+ ((u8 *)&entry->dvo_timing - 8);
+ else
+ dvo_timing = &entry->dvo_timing;
panel_fixed_mode = kzalloc(sizeof(*panel_fixed_mode), GFP_KERNEL);
@@ -185,10 +203,12 @@
dev_priv->lvds_use_ssc = general->enable_ssc;
if (dev_priv->lvds_use_ssc) {
- if (IS_I855(dev_priv->dev))
- dev_priv->lvds_ssc_freq = general->ssc_freq ? 66 : 48;
- else
- dev_priv->lvds_ssc_freq = general->ssc_freq ? 100 : 96;
+ if (IS_I85X(dev_priv->dev))
+ dev_priv->lvds_ssc_freq =
+ general->ssc_freq ? 66 : 48;
+ else
+ dev_priv->lvds_ssc_freq =
+ general->ssc_freq ? 100 : 96;
}
}
}
diff --git a/drivers/gpu/drm/i915/intel_crt.c b/drivers/gpu/drm/i915/intel_crt.c
index 6de97fc..d6a1a6e 100644
--- a/drivers/gpu/drm/i915/intel_crt.c
+++ b/drivers/gpu/drm/i915/intel_crt.c
@@ -46,7 +46,7 @@
temp = I915_READ(reg);
temp &= ~(ADPA_HSYNC_CNTL_DISABLE | ADPA_VSYNC_CNTL_DISABLE);
- temp |= ADPA_DAC_ENABLE;
+ temp &= ~ADPA_DAC_ENABLE;
switch(mode) {
case DRM_MODE_DPMS_ON:
@@ -428,8 +428,34 @@
static int intel_crt_get_modes(struct drm_connector *connector)
{
+ int ret;
struct intel_output *intel_output = to_intel_output(connector);
- return intel_ddc_get_modes(intel_output);
+ struct i2c_adapter *ddcbus;
+ struct drm_device *dev = connector->dev;
+
+
+ ret = intel_ddc_get_modes(intel_output);
+ if (ret || !IS_G4X(dev))
+ goto end;
+
+ ddcbus = intel_output->ddc_bus;
+ /* Try to probe digital port for output in DVI-I -> VGA mode. */
+ intel_output->ddc_bus =
+ intel_i2c_create(connector->dev, GPIOD, "CRTDDC_D");
+
+ if (!intel_output->ddc_bus) {
+ intel_output->ddc_bus = ddcbus;
+ dev_printk(KERN_ERR, &connector->dev->pdev->dev,
+ "DDC bus registration failed for CRTDDC_D.\n");
+ goto end;
+ }
+ /* Try to get modes by GPIOD port */
+ ret = intel_ddc_get_modes(intel_output);
+ intel_i2c_destroy(ddcbus);
+
+end:
+ return ret;
+
}
static int intel_crt_set_property(struct drm_connector *connector,
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 3e1c781..508838e 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -25,14 +25,17 @@
*/
#include <linux/i2c.h>
+#include <linux/kernel.h>
#include "drmP.h"
#include "intel_drv.h"
#include "i915_drm.h"
#include "i915_drv.h"
+#include "intel_dp.h"
#include "drm_crtc_helper.h"
bool intel_pipe_has_type (struct drm_crtc *crtc, int type);
+static void intel_update_watermarks(struct drm_device *dev);
typedef struct {
/* given values */
@@ -127,19 +130,6 @@
#define I9XX_P2_LVDS_FAST 7
#define I9XX_P2_LVDS_SLOW_LIMIT 112000
-#define INTEL_LIMIT_I8XX_DVO_DAC 0
-#define INTEL_LIMIT_I8XX_LVDS 1
-#define INTEL_LIMIT_I9XX_SDVO_DAC 2
-#define INTEL_LIMIT_I9XX_LVDS 3
-#define INTEL_LIMIT_G4X_SDVO 4
-#define INTEL_LIMIT_G4X_HDMI_DAC 5
-#define INTEL_LIMIT_G4X_SINGLE_CHANNEL_LVDS 6
-#define INTEL_LIMIT_G4X_DUAL_CHANNEL_LVDS 7
-#define INTEL_LIMIT_IGD_SDVO_DAC 8
-#define INTEL_LIMIT_IGD_LVDS 9
-#define INTEL_LIMIT_IGDNG_SDVO_DAC 10
-#define INTEL_LIMIT_IGDNG_LVDS 11
-
/*The parameter is for SDVO on G4x platform*/
#define G4X_DOT_SDVO_MIN 25000
#define G4X_DOT_SDVO_MAX 270000
@@ -218,6 +208,25 @@
#define G4X_P2_DUAL_CHANNEL_LVDS_FAST 7
#define G4X_P2_DUAL_CHANNEL_LVDS_LIMIT 0
+/*The parameter is for DISPLAY PORT on G4x platform*/
+#define G4X_DOT_DISPLAY_PORT_MIN 161670
+#define G4X_DOT_DISPLAY_PORT_MAX 227000
+#define G4X_N_DISPLAY_PORT_MIN 1
+#define G4X_N_DISPLAY_PORT_MAX 2
+#define G4X_M_DISPLAY_PORT_MIN 97
+#define G4X_M_DISPLAY_PORT_MAX 108
+#define G4X_M1_DISPLAY_PORT_MIN 0x10
+#define G4X_M1_DISPLAY_PORT_MAX 0x12
+#define G4X_M2_DISPLAY_PORT_MIN 0x05
+#define G4X_M2_DISPLAY_PORT_MAX 0x06
+#define G4X_P_DISPLAY_PORT_MIN 10
+#define G4X_P_DISPLAY_PORT_MAX 20
+#define G4X_P1_DISPLAY_PORT_MIN 1
+#define G4X_P1_DISPLAY_PORT_MAX 2
+#define G4X_P2_DISPLAY_PORT_SLOW 10
+#define G4X_P2_DISPLAY_PORT_FAST 10
+#define G4X_P2_DISPLAY_PORT_LIMIT 0
+
/* IGDNG */
/* as we calculate clock using (register_value + 2) for
N/M1/M2, so here the range value for them is (actual_value-2).
@@ -256,8 +265,11 @@
intel_igdng_find_best_PLL(const intel_limit_t *limit, struct drm_crtc *crtc,
int target, int refclk, intel_clock_t *best_clock);
-static const intel_limit_t intel_limits[] = {
- { /* INTEL_LIMIT_I8XX_DVO_DAC */
+static bool
+intel_find_pll_g4x_dp(const intel_limit_t *, struct drm_crtc *crtc,
+ int target, int refclk, intel_clock_t *best_clock);
+
+static const intel_limit_t intel_limits_i8xx_dvo = {
.dot = { .min = I8XX_DOT_MIN, .max = I8XX_DOT_MAX },
.vco = { .min = I8XX_VCO_MIN, .max = I8XX_VCO_MAX },
.n = { .min = I8XX_N_MIN, .max = I8XX_N_MAX },
@@ -269,8 +281,9 @@
.p2 = { .dot_limit = I8XX_P2_SLOW_LIMIT,
.p2_slow = I8XX_P2_SLOW, .p2_fast = I8XX_P2_FAST },
.find_pll = intel_find_best_PLL,
- },
- { /* INTEL_LIMIT_I8XX_LVDS */
+};
+
+static const intel_limit_t intel_limits_i8xx_lvds = {
.dot = { .min = I8XX_DOT_MIN, .max = I8XX_DOT_MAX },
.vco = { .min = I8XX_VCO_MIN, .max = I8XX_VCO_MAX },
.n = { .min = I8XX_N_MIN, .max = I8XX_N_MAX },
@@ -282,8 +295,9 @@
.p2 = { .dot_limit = I8XX_P2_SLOW_LIMIT,
.p2_slow = I8XX_P2_LVDS_SLOW, .p2_fast = I8XX_P2_LVDS_FAST },
.find_pll = intel_find_best_PLL,
- },
- { /* INTEL_LIMIT_I9XX_SDVO_DAC */
+};
+
+static const intel_limit_t intel_limits_i9xx_sdvo = {
.dot = { .min = I9XX_DOT_MIN, .max = I9XX_DOT_MAX },
.vco = { .min = I9XX_VCO_MIN, .max = I9XX_VCO_MAX },
.n = { .min = I9XX_N_MIN, .max = I9XX_N_MAX },
@@ -295,8 +309,9 @@
.p2 = { .dot_limit = I9XX_P2_SDVO_DAC_SLOW_LIMIT,
.p2_slow = I9XX_P2_SDVO_DAC_SLOW, .p2_fast = I9XX_P2_SDVO_DAC_FAST },
.find_pll = intel_find_best_PLL,
- },
- { /* INTEL_LIMIT_I9XX_LVDS */
+};
+
+static const intel_limit_t intel_limits_i9xx_lvds = {
.dot = { .min = I9XX_DOT_MIN, .max = I9XX_DOT_MAX },
.vco = { .min = I9XX_VCO_MIN, .max = I9XX_VCO_MAX },
.n = { .min = I9XX_N_MIN, .max = I9XX_N_MAX },
@@ -311,9 +326,10 @@
.p2 = { .dot_limit = I9XX_P2_LVDS_SLOW_LIMIT,
.p2_slow = I9XX_P2_LVDS_SLOW, .p2_fast = I9XX_P2_LVDS_FAST },
.find_pll = intel_find_best_PLL,
- },
+};
+
/* below parameter and function is for G4X Chipset Family*/
- { /* INTEL_LIMIT_G4X_SDVO */
+static const intel_limit_t intel_limits_g4x_sdvo = {
.dot = { .min = G4X_DOT_SDVO_MIN, .max = G4X_DOT_SDVO_MAX },
.vco = { .min = G4X_VCO_MIN, .max = G4X_VCO_MAX},
.n = { .min = G4X_N_SDVO_MIN, .max = G4X_N_SDVO_MAX },
@@ -327,8 +343,9 @@
.p2_fast = G4X_P2_SDVO_FAST
},
.find_pll = intel_g4x_find_best_PLL,
- },
- { /* INTEL_LIMIT_G4X_HDMI_DAC */
+};
+
+static const intel_limit_t intel_limits_g4x_hdmi = {
.dot = { .min = G4X_DOT_HDMI_DAC_MIN, .max = G4X_DOT_HDMI_DAC_MAX },
.vco = { .min = G4X_VCO_MIN, .max = G4X_VCO_MAX},
.n = { .min = G4X_N_HDMI_DAC_MIN, .max = G4X_N_HDMI_DAC_MAX },
@@ -342,8 +359,9 @@
.p2_fast = G4X_P2_HDMI_DAC_FAST
},
.find_pll = intel_g4x_find_best_PLL,
- },
- { /* INTEL_LIMIT_G4X_SINGLE_CHANNEL_LVDS */
+};
+
+static const intel_limit_t intel_limits_g4x_single_channel_lvds = {
.dot = { .min = G4X_DOT_SINGLE_CHANNEL_LVDS_MIN,
.max = G4X_DOT_SINGLE_CHANNEL_LVDS_MAX },
.vco = { .min = G4X_VCO_MIN,
@@ -365,8 +383,9 @@
.p2_fast = G4X_P2_SINGLE_CHANNEL_LVDS_FAST
},
.find_pll = intel_g4x_find_best_PLL,
- },
- { /* INTEL_LIMIT_G4X_DUAL_CHANNEL_LVDS */
+};
+
+static const intel_limit_t intel_limits_g4x_dual_channel_lvds = {
.dot = { .min = G4X_DOT_DUAL_CHANNEL_LVDS_MIN,
.max = G4X_DOT_DUAL_CHANNEL_LVDS_MAX },
.vco = { .min = G4X_VCO_MIN,
@@ -388,8 +407,32 @@
.p2_fast = G4X_P2_DUAL_CHANNEL_LVDS_FAST
},
.find_pll = intel_g4x_find_best_PLL,
- },
- { /* INTEL_LIMIT_IGD_SDVO */
+};
+
+static const intel_limit_t intel_limits_g4x_display_port = {
+ .dot = { .min = G4X_DOT_DISPLAY_PORT_MIN,
+ .max = G4X_DOT_DISPLAY_PORT_MAX },
+ .vco = { .min = G4X_VCO_MIN,
+ .max = G4X_VCO_MAX},
+ .n = { .min = G4X_N_DISPLAY_PORT_MIN,
+ .max = G4X_N_DISPLAY_PORT_MAX },
+ .m = { .min = G4X_M_DISPLAY_PORT_MIN,
+ .max = G4X_M_DISPLAY_PORT_MAX },
+ .m1 = { .min = G4X_M1_DISPLAY_PORT_MIN,
+ .max = G4X_M1_DISPLAY_PORT_MAX },
+ .m2 = { .min = G4X_M2_DISPLAY_PORT_MIN,
+ .max = G4X_M2_DISPLAY_PORT_MAX },
+ .p = { .min = G4X_P_DISPLAY_PORT_MIN,
+ .max = G4X_P_DISPLAY_PORT_MAX },
+ .p1 = { .min = G4X_P1_DISPLAY_PORT_MIN,
+ .max = G4X_P1_DISPLAY_PORT_MAX},
+ .p2 = { .dot_limit = G4X_P2_DISPLAY_PORT_LIMIT,
+ .p2_slow = G4X_P2_DISPLAY_PORT_SLOW,
+ .p2_fast = G4X_P2_DISPLAY_PORT_FAST },
+ .find_pll = intel_find_pll_g4x_dp,
+};
+
+static const intel_limit_t intel_limits_igd_sdvo = {
.dot = { .min = I9XX_DOT_MIN, .max = I9XX_DOT_MAX},
.vco = { .min = IGD_VCO_MIN, .max = IGD_VCO_MAX },
.n = { .min = IGD_N_MIN, .max = IGD_N_MAX },
@@ -401,8 +444,9 @@
.p2 = { .dot_limit = I9XX_P2_SDVO_DAC_SLOW_LIMIT,
.p2_slow = I9XX_P2_SDVO_DAC_SLOW, .p2_fast = I9XX_P2_SDVO_DAC_FAST },
.find_pll = intel_find_best_PLL,
- },
- { /* INTEL_LIMIT_IGD_LVDS */
+};
+
+static const intel_limit_t intel_limits_igd_lvds = {
.dot = { .min = I9XX_DOT_MIN, .max = I9XX_DOT_MAX },
.vco = { .min = IGD_VCO_MIN, .max = IGD_VCO_MAX },
.n = { .min = IGD_N_MIN, .max = IGD_N_MAX },
@@ -415,8 +459,9 @@
.p2 = { .dot_limit = I9XX_P2_LVDS_SLOW_LIMIT,
.p2_slow = I9XX_P2_LVDS_SLOW, .p2_fast = I9XX_P2_LVDS_SLOW },
.find_pll = intel_find_best_PLL,
- },
- { /* INTEL_LIMIT_IGDNG_SDVO_DAC */
+};
+
+static const intel_limit_t intel_limits_igdng_sdvo = {
.dot = { .min = IGDNG_DOT_MIN, .max = IGDNG_DOT_MAX },
.vco = { .min = IGDNG_VCO_MIN, .max = IGDNG_VCO_MAX },
.n = { .min = IGDNG_N_MIN, .max = IGDNG_N_MAX },
@@ -429,8 +474,9 @@
.p2_slow = IGDNG_P2_SDVO_DAC_SLOW,
.p2_fast = IGDNG_P2_SDVO_DAC_FAST },
.find_pll = intel_igdng_find_best_PLL,
- },
- { /* INTEL_LIMIT_IGDNG_LVDS */
+};
+
+static const intel_limit_t intel_limits_igdng_lvds = {
.dot = { .min = IGDNG_DOT_MIN, .max = IGDNG_DOT_MAX },
.vco = { .min = IGDNG_VCO_MIN, .max = IGDNG_VCO_MAX },
.n = { .min = IGDNG_N_MIN, .max = IGDNG_N_MAX },
@@ -443,16 +489,15 @@
.p2_slow = IGDNG_P2_LVDS_SLOW,
.p2_fast = IGDNG_P2_LVDS_FAST },
.find_pll = intel_igdng_find_best_PLL,
- },
};
static const intel_limit_t *intel_igdng_limit(struct drm_crtc *crtc)
{
const intel_limit_t *limit;
if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS))
- limit = &intel_limits[INTEL_LIMIT_IGDNG_LVDS];
+ limit = &intel_limits_igdng_lvds;
else
- limit = &intel_limits[INTEL_LIMIT_IGDNG_SDVO_DAC];
+ limit = &intel_limits_igdng_sdvo;
return limit;
}
@@ -467,19 +512,19 @@
if ((I915_READ(LVDS) & LVDS_CLKB_POWER_MASK) ==
LVDS_CLKB_POWER_UP)
/* LVDS with dual channel */
- limit = &intel_limits
- [INTEL_LIMIT_G4X_DUAL_CHANNEL_LVDS];
+ limit = &intel_limits_g4x_dual_channel_lvds;
else
/* LVDS with dual channel */
- limit = &intel_limits
- [INTEL_LIMIT_G4X_SINGLE_CHANNEL_LVDS];
+ limit = &intel_limits_g4x_single_channel_lvds;
} else if (intel_pipe_has_type(crtc, INTEL_OUTPUT_HDMI) ||
intel_pipe_has_type(crtc, INTEL_OUTPUT_ANALOG)) {
- limit = &intel_limits[INTEL_LIMIT_G4X_HDMI_DAC];
+ limit = &intel_limits_g4x_hdmi;
} else if (intel_pipe_has_type(crtc, INTEL_OUTPUT_SDVO)) {
- limit = &intel_limits[INTEL_LIMIT_G4X_SDVO];
+ limit = &intel_limits_g4x_sdvo;
+ } else if (intel_pipe_has_type (crtc, INTEL_OUTPUT_DISPLAYPORT)) {
+ limit = &intel_limits_g4x_display_port;
} else /* The option is for other outputs */
- limit = &intel_limits[INTEL_LIMIT_I9XX_SDVO_DAC];
+ limit = &intel_limits_i9xx_sdvo;
return limit;
}
@@ -495,19 +540,19 @@
limit = intel_g4x_limit(crtc);
} else if (IS_I9XX(dev) && !IS_IGD(dev)) {
if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS))
- limit = &intel_limits[INTEL_LIMIT_I9XX_LVDS];
+ limit = &intel_limits_i9xx_lvds;
else
- limit = &intel_limits[INTEL_LIMIT_I9XX_SDVO_DAC];
+ limit = &intel_limits_i9xx_sdvo;
} else if (IS_IGD(dev)) {
if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS))
- limit = &intel_limits[INTEL_LIMIT_IGD_LVDS];
+ limit = &intel_limits_igd_lvds;
else
- limit = &intel_limits[INTEL_LIMIT_IGD_SDVO_DAC];
+ limit = &intel_limits_igd_sdvo;
} else {
if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS))
- limit = &intel_limits[INTEL_LIMIT_I8XX_LVDS];
+ limit = &intel_limits_i8xx_lvds;
else
- limit = &intel_limits[INTEL_LIMIT_I8XX_DVO_DAC];
+ limit = &intel_limits_i8xx_dvo;
}
return limit;
}
@@ -764,6 +809,32 @@
return found;
}
+/* DisplayPort has only two frequencies, 162MHz and 270MHz */
+static bool
+intel_find_pll_g4x_dp(const intel_limit_t *limit, struct drm_crtc *crtc,
+ int target, int refclk, intel_clock_t *best_clock)
+{
+ intel_clock_t clock;
+ if (target < 200000) {
+ clock.p1 = 2;
+ clock.p2 = 10;
+ clock.n = 2;
+ clock.m1 = 23;
+ clock.m2 = 8;
+ } else {
+ clock.p1 = 1;
+ clock.p2 = 10;
+ clock.n = 1;
+ clock.m1 = 14;
+ clock.m2 = 2;
+ }
+ clock.m = 5 * (clock.m1 + 2) + (clock.m2 + 2);
+ clock.p = (clock.p1 * clock.p2);
+ clock.dot = 96000 * clock.m / (clock.n + 2) / clock.p;
+ memcpy(best_clock, &clock, sizeof(intel_clock_t));
+ return true;
+}
+
void
intel_wait_for_vblank(struct drm_device *dev)
{
@@ -933,7 +1004,7 @@
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
int pipe = intel_crtc->pipe;
- int plane = intel_crtc->pipe;
+ int plane = intel_crtc->plane;
int pch_dpll_reg = (pipe == 0) ? PCH_DPLL_A : PCH_DPLL_B;
int pipeconf_reg = (pipe == 0) ? PIPEACONF : PIPEBCONF;
int dspcntr_reg = (plane == 0) ? DSPACNTR : DSPBCNTR;
@@ -1263,8 +1334,10 @@
/* Give the overlay scaler a chance to enable if it's on this pipe */
//intel_crtc_dpms_video(crtc, true); TODO
+ intel_update_watermarks(dev);
break;
case DRM_MODE_DPMS_OFF:
+ intel_update_watermarks(dev);
/* Give the overlay scaler a chance to disable if it's on this pipe */
//intel_crtc_dpms_video(crtc, FALSE); TODO
@@ -1443,7 +1516,6 @@
return 0; /* Silence gcc warning */
}
-
/**
* Return the pipe currently connected to the panel fitter,
* or -1 if the panel fitter is not present or not in use
@@ -1502,7 +1574,7 @@
temp = (u64) DATA_N * pixel_clock;
temp = div_u64(temp, link_clock);
- m_n->gmch_m = (temp * bytes_per_pixel) / nlanes;
+ m_n->gmch_m = div_u64(temp * bytes_per_pixel, nlanes);
m_n->gmch_n = DATA_N;
fdi_reduce_ratio(&m_n->gmch_m, &m_n->gmch_n);
@@ -1513,6 +1585,420 @@
}
+struct intel_watermark_params {
+ unsigned long fifo_size;
+ unsigned long max_wm;
+ unsigned long default_wm;
+ unsigned long guard_size;
+ unsigned long cacheline_size;
+};
+
+/* IGD has different values for various configs */
+static struct intel_watermark_params igd_display_wm = {
+ IGD_DISPLAY_FIFO,
+ IGD_MAX_WM,
+ IGD_DFT_WM,
+ IGD_GUARD_WM,
+ IGD_FIFO_LINE_SIZE
+};
+static struct intel_watermark_params igd_display_hplloff_wm = {
+ IGD_DISPLAY_FIFO,
+ IGD_MAX_WM,
+ IGD_DFT_HPLLOFF_WM,
+ IGD_GUARD_WM,
+ IGD_FIFO_LINE_SIZE
+};
+static struct intel_watermark_params igd_cursor_wm = {
+ IGD_CURSOR_FIFO,
+ IGD_CURSOR_MAX_WM,
+ IGD_CURSOR_DFT_WM,
+ IGD_CURSOR_GUARD_WM,
+ IGD_FIFO_LINE_SIZE,
+};
+static struct intel_watermark_params igd_cursor_hplloff_wm = {
+ IGD_CURSOR_FIFO,
+ IGD_CURSOR_MAX_WM,
+ IGD_CURSOR_DFT_WM,
+ IGD_CURSOR_GUARD_WM,
+ IGD_FIFO_LINE_SIZE
+};
+static struct intel_watermark_params i945_wm_info = {
+ I915_FIFO_LINE_SIZE,
+ I915_MAX_WM,
+ 1,
+ 0,
+ IGD_FIFO_LINE_SIZE
+};
+static struct intel_watermark_params i915_wm_info = {
+ I945_FIFO_SIZE,
+ I915_MAX_WM,
+ 1,
+ 0,
+ I915_FIFO_LINE_SIZE
+};
+static struct intel_watermark_params i855_wm_info = {
+ I855GM_FIFO_SIZE,
+ I915_MAX_WM,
+ 1,
+ 0,
+ I830_FIFO_LINE_SIZE
+};
+static struct intel_watermark_params i830_wm_info = {
+ I830_FIFO_SIZE,
+ I915_MAX_WM,
+ 1,
+ 0,
+ I830_FIFO_LINE_SIZE
+};
+
+static unsigned long intel_calculate_wm(unsigned long clock_in_khz,
+ struct intel_watermark_params *wm,
+ int pixel_size,
+ unsigned long latency_ns)
+{
+ unsigned long bytes_required, wm_size;
+
+ bytes_required = (clock_in_khz * pixel_size * latency_ns) / 1000000;
+ bytes_required /= wm->cacheline_size;
+ wm_size = wm->fifo_size - bytes_required - wm->guard_size;
+
+ if (wm_size > wm->max_wm)
+ wm_size = wm->max_wm;
+ if (wm_size == 0)
+ wm_size = wm->default_wm;
+ return wm_size;
+}
+
+struct cxsr_latency {
+ int is_desktop;
+ unsigned long fsb_freq;
+ unsigned long mem_freq;
+ unsigned long display_sr;
+ unsigned long display_hpll_disable;
+ unsigned long cursor_sr;
+ unsigned long cursor_hpll_disable;
+};
+
+static struct cxsr_latency cxsr_latency_table[] = {
+ {1, 800, 400, 3382, 33382, 3983, 33983}, /* DDR2-400 SC */
+ {1, 800, 667, 3354, 33354, 3807, 33807}, /* DDR2-667 SC */
+ {1, 800, 800, 3347, 33347, 3763, 33763}, /* DDR2-800 SC */
+
+ {1, 667, 400, 3400, 33400, 4021, 34021}, /* DDR2-400 SC */
+ {1, 667, 667, 3372, 33372, 3845, 33845}, /* DDR2-667 SC */
+ {1, 667, 800, 3386, 33386, 3822, 33822}, /* DDR2-800 SC */
+
+ {1, 400, 400, 3472, 33472, 4173, 34173}, /* DDR2-400 SC */
+ {1, 400, 667, 3443, 33443, 3996, 33996}, /* DDR2-667 SC */
+ {1, 400, 800, 3430, 33430, 3946, 33946}, /* DDR2-800 SC */
+
+ {0, 800, 400, 3438, 33438, 4065, 34065}, /* DDR2-400 SC */
+ {0, 800, 667, 3410, 33410, 3889, 33889}, /* DDR2-667 SC */
+ {0, 800, 800, 3403, 33403, 3845, 33845}, /* DDR2-800 SC */
+
+ {0, 667, 400, 3456, 33456, 4103, 34106}, /* DDR2-400 SC */
+ {0, 667, 667, 3428, 33428, 3927, 33927}, /* DDR2-667 SC */
+ {0, 667, 800, 3443, 33443, 3905, 33905}, /* DDR2-800 SC */
+
+ {0, 400, 400, 3528, 33528, 4255, 34255}, /* DDR2-400 SC */
+ {0, 400, 667, 3500, 33500, 4079, 34079}, /* DDR2-667 SC */
+ {0, 400, 800, 3487, 33487, 4029, 34029}, /* DDR2-800 SC */
+};
+
+static struct cxsr_latency *intel_get_cxsr_latency(int is_desktop, int fsb,
+ int mem)
+{
+ int i;
+ struct cxsr_latency *latency;
+
+ if (fsb == 0 || mem == 0)
+ return NULL;
+
+ for (i = 0; i < ARRAY_SIZE(cxsr_latency_table); i++) {
+ latency = &cxsr_latency_table[i];
+ if (is_desktop == latency->is_desktop &&
+ fsb == latency->fsb_freq && mem == latency->mem_freq)
+ break;
+ }
+ if (i >= ARRAY_SIZE(cxsr_latency_table)) {
+ DRM_DEBUG("Unknown FSB/MEM found, disable CxSR\n");
+ return NULL;
+ }
+ return latency;
+}
+
+static void igd_disable_cxsr(struct drm_device *dev)
+{
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ u32 reg;
+
+ /* deactivate cxsr */
+ reg = I915_READ(DSPFW3);
+ reg &= ~(IGD_SELF_REFRESH_EN);
+ I915_WRITE(DSPFW3, reg);
+ DRM_INFO("Big FIFO is disabled\n");
+}
+
+static void igd_enable_cxsr(struct drm_device *dev, unsigned long clock,
+ int pixel_size)
+{
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ u32 reg;
+ unsigned long wm;
+ struct cxsr_latency *latency;
+
+ latency = intel_get_cxsr_latency(IS_IGDG(dev), dev_priv->fsb_freq,
+ dev_priv->mem_freq);
+ if (!latency) {
+ DRM_DEBUG("Unknown FSB/MEM found, disable CxSR\n");
+ igd_disable_cxsr(dev);
+ return;
+ }
+
+ /* Display SR */
+ wm = intel_calculate_wm(clock, &igd_display_wm, pixel_size,
+ latency->display_sr);
+ reg = I915_READ(DSPFW1);
+ reg &= 0x7fffff;
+ reg |= wm << 23;
+ I915_WRITE(DSPFW1, reg);
+ DRM_DEBUG("DSPFW1 register is %x\n", reg);
+
+ /* cursor SR */
+ wm = intel_calculate_wm(clock, &igd_cursor_wm, pixel_size,
+ latency->cursor_sr);
+ reg = I915_READ(DSPFW3);
+ reg &= ~(0x3f << 24);
+ reg |= (wm & 0x3f) << 24;
+ I915_WRITE(DSPFW3, reg);
+
+ /* Display HPLL off SR */
+ wm = intel_calculate_wm(clock, &igd_display_hplloff_wm,
+ latency->display_hpll_disable, I915_FIFO_LINE_SIZE);
+ reg = I915_READ(DSPFW3);
+ reg &= 0xfffffe00;
+ reg |= wm & 0x1ff;
+ I915_WRITE(DSPFW3, reg);
+
+ /* cursor HPLL off SR */
+ wm = intel_calculate_wm(clock, &igd_cursor_hplloff_wm, pixel_size,
+ latency->cursor_hpll_disable);
+ reg = I915_READ(DSPFW3);
+ reg &= ~(0x3f << 16);
+ reg |= (wm & 0x3f) << 16;
+ I915_WRITE(DSPFW3, reg);
+ DRM_DEBUG("DSPFW3 register is %x\n", reg);
+
+ /* activate cxsr */
+ reg = I915_READ(DSPFW3);
+ reg |= IGD_SELF_REFRESH_EN;
+ I915_WRITE(DSPFW3, reg);
+
+ DRM_INFO("Big FIFO is enabled\n");
+
+ return;
+}
+
+const static int latency_ns = 5000; /* default for non-igd platforms */
+
+
+static void i965_update_wm(struct drm_device *dev)
+{
+ struct drm_i915_private *dev_priv = dev->dev_private;
+
+ DRM_DEBUG("Setting FIFO watermarks - A: 8, B: 8, C: 8, SR 8\n");
+
+ /* 965 has limitations... */
+ I915_WRITE(DSPFW1, (8 << 16) | (8 << 8) | (8 << 0));
+ I915_WRITE(DSPFW2, (8 << 8) | (8 << 0));
+}
+
+static void i9xx_update_wm(struct drm_device *dev, int planea_clock,
+ int planeb_clock, int sr_hdisplay, int pixel_size)
+{
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ uint32_t fwater_lo = I915_READ(FW_BLC) & MM_FIFO_WATERMARK;
+ uint32_t fwater_hi = I915_READ(FW_BLC2) & LM_FIFO_WATERMARK;
+ int bsize, asize, cwm, bwm = 1, awm = 1, srwm = 1;
+ uint32_t dsparb = I915_READ(DSPARB);
+ int planea_entries, planeb_entries;
+ struct intel_watermark_params *wm_params;
+ unsigned long line_time_us;
+ int sr_clock, sr_entries = 0;
+
+ if (IS_I965GM(dev) || IS_I945GM(dev))
+ wm_params = &i945_wm_info;
+ else if (IS_I9XX(dev))
+ wm_params = &i915_wm_info;
+ else
+ wm_params = &i855_wm_info;
+
+ planea_entries = intel_calculate_wm(planea_clock, wm_params,
+ pixel_size, latency_ns);
+ planeb_entries = intel_calculate_wm(planeb_clock, wm_params,
+ pixel_size, latency_ns);
+
+ DRM_DEBUG("FIFO entries - A: %d, B: %d\n", planea_entries,
+ planeb_entries);
+
+ if (IS_I9XX(dev)) {
+ asize = dsparb & 0x7f;
+ bsize = (dsparb >> DSPARB_CSTART_SHIFT) & 0x7f;
+ } else {
+ asize = dsparb & 0x1ff;
+ bsize = (dsparb >> DSPARB_BEND_SHIFT) & 0x1ff;
+ }
+ DRM_DEBUG("FIFO size - A: %d, B: %d\n", asize, bsize);
+
+ /* Two extra entries for padding */
+ awm = asize - (planea_entries + 2);
+ bwm = bsize - (planeb_entries + 2);
+
+ /* Sanity check against potentially bad FIFO allocations */
+ if (awm <= 0) {
+ /* pipe is on but has too few FIFO entries */
+ if (planea_entries != 0)
+ DRM_DEBUG("plane A needs more FIFO entries\n");
+ awm = 1;
+ }
+ if (bwm <= 0) {
+ if (planeb_entries != 0)
+ DRM_DEBUG("plane B needs more FIFO entries\n");
+ bwm = 1;
+ }
+
+ /*
+ * Overlay gets an aggressive default since video jitter is bad.
+ */
+ cwm = 2;
+
+ /* Calc sr entries for one pipe configs */
+ if (!planea_clock || !planeb_clock) {
+ sr_clock = planea_clock ? planea_clock : planeb_clock;
+ line_time_us = (sr_hdisplay * 1000) / sr_clock;
+ sr_entries = (((latency_ns / line_time_us) + 1) * pixel_size *
+ sr_hdisplay) / 1000;
+ sr_entries = roundup(sr_entries / wm_params->cacheline_size, 1);
+ if (sr_entries < wm_params->fifo_size)
+ srwm = wm_params->fifo_size - sr_entries;
+ }
+
+ DRM_DEBUG("Setting FIFO watermarks - A: %d, B: %d, C: %d, SR %d\n",
+ awm, bwm, cwm, srwm);
+
+ fwater_lo = fwater_lo | ((bwm & 0x3f) << 16) | (awm & 0x3f);
+ fwater_hi = fwater_hi | (cwm & 0x1f);
+
+ I915_WRITE(FW_BLC, fwater_lo);
+ I915_WRITE(FW_BLC2, fwater_hi);
+ if (IS_I9XX(dev))
+ I915_WRITE(FW_BLC_SELF, FW_BLC_SELF_EN | (srwm & 0x3f));
+}
+
+static void i830_update_wm(struct drm_device *dev, int planea_clock,
+ int pixel_size)
+{
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ uint32_t dsparb = I915_READ(DSPARB);
+ uint32_t fwater_lo = I915_READ(FW_BLC) & MM_FIFO_WATERMARK;
+ unsigned int asize, awm;
+ int planea_entries;
+
+ planea_entries = intel_calculate_wm(planea_clock, &i830_wm_info,
+ pixel_size, latency_ns);
+
+ asize = dsparb & 0x7f;
+
+ awm = asize - planea_entries;
+
+ fwater_lo = fwater_lo | awm;
+
+ I915_WRITE(FW_BLC, fwater_lo);
+}
+
+/**
+ * intel_update_watermarks - update FIFO watermark values based on current modes
+ *
+ * Calculate watermark values for the various WM regs based on current mode
+ * and plane configuration.
+ *
+ * There are several cases to deal with here:
+ * - normal (i.e. non-self-refresh)
+ * - self-refresh (SR) mode
+ * - lines are large relative to FIFO size (buffer can hold up to 2)
+ * - lines are small relative to FIFO size (buffer can hold more than 2
+ * lines), so need to account for TLB latency
+ *
+ * The normal calculation is:
+ * watermark = dotclock * bytes per pixel * latency
+ * where latency is platform & configuration dependent (we assume pessimal
+ * values here).
+ *
+ * The SR calculation is:
+ * watermark = (trunc(latency/line time)+1) * surface width *
+ * bytes per pixel
+ * where
+ * line time = htotal / dotclock
+ * and latency is assumed to be high, as above.
+ *
+ * The final value programmed to the register should always be rounded up,
+ * and include an extra 2 entries to account for clock crossings.
+ *
+ * We don't use the sprite, so we can ignore that. And on Crestline we have
+ * to set the non-SR watermarks to 8.
+ */
+static void intel_update_watermarks(struct drm_device *dev)
+{
+ struct drm_crtc *crtc;
+ struct intel_crtc *intel_crtc;
+ int sr_hdisplay = 0;
+ unsigned long planea_clock = 0, planeb_clock = 0, sr_clock = 0;
+ int enabled = 0, pixel_size = 0;
+
+ if (DSPARB_HWCONTROL(dev))
+ return;
+
+ /* Get the clock config from both planes */
+ list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
+ intel_crtc = to_intel_crtc(crtc);
+ if (crtc->enabled) {
+ enabled++;
+ if (intel_crtc->plane == 0) {
+ DRM_DEBUG("plane A (pipe %d) clock: %d\n",
+ intel_crtc->pipe, crtc->mode.clock);
+ planea_clock = crtc->mode.clock;
+ } else {
+ DRM_DEBUG("plane B (pipe %d) clock: %d\n",
+ intel_crtc->pipe, crtc->mode.clock);
+ planeb_clock = crtc->mode.clock;
+ }
+ sr_hdisplay = crtc->mode.hdisplay;
+ sr_clock = crtc->mode.clock;
+ if (crtc->fb)
+ pixel_size = crtc->fb->bits_per_pixel / 8;
+ else
+ pixel_size = 4; /* by default */
+ }
+ }
+
+ if (enabled <= 0)
+ return;
+
+ /* Single pipe configs can enable self refresh */
+ if (enabled == 1 && IS_IGD(dev))
+ igd_enable_cxsr(dev, sr_clock, pixel_size);
+ else if (IS_IGD(dev))
+ igd_disable_cxsr(dev);
+
+ if (IS_I965G(dev))
+ i965_update_wm(dev);
+ else if (IS_I9XX(dev) || IS_MOBILE(dev))
+ i9xx_update_wm(dev, planea_clock, planeb_clock, sr_hdisplay,
+ pixel_size);
+ else
+ i830_update_wm(dev, planea_clock, pixel_size);
+}
+
static int intel_crtc_mode_set(struct drm_crtc *crtc,
struct drm_display_mode *mode,
struct drm_display_mode *adjusted_mode,
@@ -1541,7 +2027,7 @@
intel_clock_t clock;
u32 dpll = 0, fp = 0, dspcntr, pipeconf;
bool ok, is_sdvo = false, is_dvo = false;
- bool is_crt = false, is_lvds = false, is_tv = false;
+ bool is_crt = false, is_lvds = false, is_tv = false, is_dp = false;
struct drm_mode_config *mode_config = &dev->mode_config;
struct drm_connector *connector;
const intel_limit_t *limit;
@@ -1585,6 +2071,9 @@
case INTEL_OUTPUT_ANALOG:
is_crt = true;
break;
+ case INTEL_OUTPUT_DISPLAYPORT:
+ is_dp = true;
+ break;
}
num_outputs++;
@@ -1600,6 +2089,7 @@
} else {
refclk = 48000;
}
+
/*
* Returns a set of divisors for the desired target clock with the given
@@ -1662,6 +2152,8 @@
else if (IS_IGDNG(dev))
dpll |= (sdvo_pixel_multiply - 1) << PLL_REF_SDVO_HDMI_MULTIPLIER_SHIFT;
}
+ if (is_dp)
+ dpll |= DPLL_DVO_HIGH_SPEED;
/* compute bitmask from p1 value */
if (IS_IGD(dev))
@@ -1809,6 +2301,8 @@
I915_WRITE(lvds_reg, lvds);
I915_READ(lvds_reg);
}
+ if (is_dp)
+ intel_dp_set_m_n(crtc, mode, adjusted_mode);
I915_WRITE(fp_reg, fp);
I915_WRITE(dpll_reg, dpll);
@@ -1871,6 +2365,9 @@
/* Flush the plane changes */
ret = intel_pipe_set_base(crtc, x, y, old_fb);
+
+ intel_update_watermarks(dev);
+
drm_vblank_post_modeset(dev, pipe);
return ret;
@@ -2359,6 +2856,7 @@
drm_mode_crtc_set_gamma_size(&intel_crtc->base, 256);
intel_crtc->pipe = pipe;
+ intel_crtc->plane = pipe;
for (i = 0; i < 256; i++) {
intel_crtc->lut_r[i] = i;
intel_crtc->lut_g[i] = i;
@@ -2475,6 +2973,8 @@
found = intel_sdvo_init(dev, SDVOB);
if (!found && SUPPORTS_INTEGRATED_HDMI(dev))
intel_hdmi_init(dev, SDVOB);
+ if (!found && SUPPORTS_INTEGRATED_DP(dev))
+ intel_dp_init(dev, DP_B);
}
/* Before G4X SDVOC doesn't have its own detect register */
@@ -2487,7 +2987,11 @@
found = intel_sdvo_init(dev, SDVOC);
if (!found && SUPPORTS_INTEGRATED_HDMI(dev))
intel_hdmi_init(dev, SDVOC);
+ if (!found && SUPPORTS_INTEGRATED_DP(dev))
+ intel_dp_init(dev, DP_C);
}
+ if (SUPPORTS_INTEGRATED_DP(dev) && (I915_READ(DP_D) & DP_DETECTED))
+ intel_dp_init(dev, DP_D);
} else
intel_dvo_init(dev);
@@ -2530,6 +3034,11 @@
(1 << 1));
clone_mask = (1 << INTEL_OUTPUT_TVOUT);
break;
+ case INTEL_OUTPUT_DISPLAYPORT:
+ crtc_mask = ((1 << 0) |
+ (1 << 1));
+ clone_mask = (1 << INTEL_OUTPUT_DISPLAYPORT);
+ break;
}
encoder->possible_crtcs = crtc_mask;
encoder->possible_clones = intel_connector_clones(dev, clone_mask);
diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
new file mode 100644
index 0000000..6770ae8
--- /dev/null
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -0,0 +1,1156 @@
+/*
+ * Copyright © 2008 Intel Corporation
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
+ * IN THE SOFTWARE.
+ *
+ * Authors:
+ * Keith Packard <keithp@keithp.com>
+ *
+ */
+
+#include <linux/i2c.h>
+#include "drmP.h"
+#include "drm.h"
+#include "drm_crtc.h"
+#include "drm_crtc_helper.h"
+#include "intel_drv.h"
+#include "i915_drm.h"
+#include "i915_drv.h"
+#include "intel_dp.h"
+
+#define DP_LINK_STATUS_SIZE 6
+#define DP_LINK_CHECK_TIMEOUT (10 * 1000)
+
+#define DP_LINK_CONFIGURATION_SIZE 9
+
+struct intel_dp_priv {
+ uint32_t output_reg;
+ uint32_t DP;
+ uint8_t link_configuration[DP_LINK_CONFIGURATION_SIZE];
+ uint32_t save_DP;
+ uint8_t save_link_configuration[DP_LINK_CONFIGURATION_SIZE];
+ bool has_audio;
+ int dpms_mode;
+ uint8_t link_bw;
+ uint8_t lane_count;
+ uint8_t dpcd[4];
+ struct intel_output *intel_output;
+ struct i2c_adapter adapter;
+ struct i2c_algo_dp_aux_data algo;
+};
+
+static void
+intel_dp_link_train(struct intel_output *intel_output, uint32_t DP,
+ uint8_t link_configuration[DP_LINK_CONFIGURATION_SIZE]);
+
+static void
+intel_dp_link_down(struct intel_output *intel_output, uint32_t DP);
+
+static int
+intel_dp_max_lane_count(struct intel_output *intel_output)
+{
+ struct intel_dp_priv *dp_priv = intel_output->dev_priv;
+ int max_lane_count = 4;
+
+ if (dp_priv->dpcd[0] >= 0x11) {
+ max_lane_count = dp_priv->dpcd[2] & 0x1f;
+ switch (max_lane_count) {
+ case 1: case 2: case 4:
+ break;
+ default:
+ max_lane_count = 4;
+ }
+ }
+ return max_lane_count;
+}
+
+static int
+intel_dp_max_link_bw(struct intel_output *intel_output)
+{
+ struct intel_dp_priv *dp_priv = intel_output->dev_priv;
+ int max_link_bw = dp_priv->dpcd[1];
+
+ switch (max_link_bw) {
+ case DP_LINK_BW_1_62:
+ case DP_LINK_BW_2_7:
+ break;
+ default:
+ max_link_bw = DP_LINK_BW_1_62;
+ break;
+ }
+ return max_link_bw;
+}
+
+static int
+intel_dp_link_clock(uint8_t link_bw)
+{
+ if (link_bw == DP_LINK_BW_2_7)
+ return 270000;
+ else
+ return 162000;
+}
+
+/* I think this is a fiction */
+static int
+intel_dp_link_required(int pixel_clock)
+{
+ return pixel_clock * 3;
+}
+
+static int
+intel_dp_mode_valid(struct drm_connector *connector,
+ struct drm_display_mode *mode)
+{
+ struct intel_output *intel_output = to_intel_output(connector);
+ int max_link_clock = intel_dp_link_clock(intel_dp_max_link_bw(intel_output));
+ int max_lanes = intel_dp_max_lane_count(intel_output);
+
+ if (intel_dp_link_required(mode->clock) > max_link_clock * max_lanes)
+ return MODE_CLOCK_HIGH;
+
+ if (mode->clock < 10000)
+ return MODE_CLOCK_LOW;
+
+ return MODE_OK;
+}
+
+static uint32_t
+pack_aux(uint8_t *src, int src_bytes)
+{
+ int i;
+ uint32_t v = 0;
+
+ if (src_bytes > 4)
+ src_bytes = 4;
+ for (i = 0; i < src_bytes; i++)
+ v |= ((uint32_t) src[i]) << ((3-i) * 8);
+ return v;
+}
+
+static void
+unpack_aux(uint32_t src, uint8_t *dst, int dst_bytes)
+{
+ int i;
+ if (dst_bytes > 4)
+ dst_bytes = 4;
+ for (i = 0; i < dst_bytes; i++)
+ dst[i] = src >> ((3-i) * 8);
+}
+
+/* hrawclock is 1/4 the FSB frequency */
+static int
+intel_hrawclk(struct drm_device *dev)
+{
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ uint32_t clkcfg;
+
+ clkcfg = I915_READ(CLKCFG);
+ switch (clkcfg & CLKCFG_FSB_MASK) {
+ case CLKCFG_FSB_400:
+ return 100;
+ case CLKCFG_FSB_533:
+ return 133;
+ case CLKCFG_FSB_667:
+ return 166;
+ case CLKCFG_FSB_800:
+ return 200;
+ case CLKCFG_FSB_1067:
+ return 266;
+ case CLKCFG_FSB_1333:
+ return 333;
+ /* these two are just a guess; one of them might be right */
+ case CLKCFG_FSB_1600:
+ case CLKCFG_FSB_1600_ALT:
+ return 400;
+ default:
+ return 133;
+ }
+}
+
+static int
+intel_dp_aux_ch(struct intel_output *intel_output,
+ uint8_t *send, int send_bytes,
+ uint8_t *recv, int recv_size)
+{
+ struct intel_dp_priv *dp_priv = intel_output->dev_priv;
+ uint32_t output_reg = dp_priv->output_reg;
+ struct drm_device *dev = intel_output->base.dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ uint32_t ch_ctl = output_reg + 0x10;
+ uint32_t ch_data = ch_ctl + 4;
+ int i;
+ int recv_bytes;
+ uint32_t ctl;
+ uint32_t status;
+ uint32_t aux_clock_divider;
+ int try;
+
+ /* The clock divider is based off the hrawclk,
+ * and would like to run at 2MHz. So, take the
+ * hrawclk value and divide by 2 and use that
+ */
+ aux_clock_divider = intel_hrawclk(dev) / 2;
+ /* Must try at least 3 times according to DP spec */
+ for (try = 0; try < 5; try++) {
+ /* Load the send data into the aux channel data registers */
+ for (i = 0; i < send_bytes; i += 4) {
+ uint32_t d = pack_aux(send + i, send_bytes - i);;
+
+ I915_WRITE(ch_data + i, d);
+ }
+
+ ctl = (DP_AUX_CH_CTL_SEND_BUSY |
+ DP_AUX_CH_CTL_TIME_OUT_400us |
+ (send_bytes << DP_AUX_CH_CTL_MESSAGE_SIZE_SHIFT) |
+ (5 << DP_AUX_CH_CTL_PRECHARGE_2US_SHIFT) |
+ (aux_clock_divider << DP_AUX_CH_CTL_BIT_CLOCK_2X_SHIFT) |
+ DP_AUX_CH_CTL_DONE |
+ DP_AUX_CH_CTL_TIME_OUT_ERROR |
+ DP_AUX_CH_CTL_RECEIVE_ERROR);
+
+ /* Send the command and wait for it to complete */
+ I915_WRITE(ch_ctl, ctl);
+ (void) I915_READ(ch_ctl);
+ for (;;) {
+ udelay(100);
+ status = I915_READ(ch_ctl);
+ if ((status & DP_AUX_CH_CTL_SEND_BUSY) == 0)
+ break;
+ }
+
+ /* Clear done status and any errors */
+ I915_WRITE(ch_ctl, (ctl |
+ DP_AUX_CH_CTL_DONE |
+ DP_AUX_CH_CTL_TIME_OUT_ERROR |
+ DP_AUX_CH_CTL_RECEIVE_ERROR));
+ (void) I915_READ(ch_ctl);
+ if ((status & DP_AUX_CH_CTL_TIME_OUT_ERROR) == 0)
+ break;
+ }
+
+ if ((status & DP_AUX_CH_CTL_DONE) == 0) {
+ DRM_ERROR("dp_aux_ch not done status 0x%08x\n", status);
+ return -EBUSY;
+ }
+
+ /* Check for timeout or receive error.
+ * Timeouts occur when the sink is not connected
+ */
+ if (status & DP_AUX_CH_CTL_RECEIVE_ERROR) {
+ DRM_ERROR("dp_aux_ch receive error status 0x%08x\n", status);
+ return -EIO;
+ }
+
+ /* Timeouts occur when the device isn't connected, so they're
+ * "normal" -- don't fill the kernel log with these */
+ if (status & DP_AUX_CH_CTL_TIME_OUT_ERROR) {
+ DRM_DEBUG("dp_aux_ch timeout status 0x%08x\n", status);
+ return -ETIMEDOUT;
+ }
+
+ /* Unload any bytes sent back from the other side */
+ recv_bytes = ((status & DP_AUX_CH_CTL_MESSAGE_SIZE_MASK) >>
+ DP_AUX_CH_CTL_MESSAGE_SIZE_SHIFT);
+
+ if (recv_bytes > recv_size)
+ recv_bytes = recv_size;
+
+ for (i = 0; i < recv_bytes; i += 4) {
+ uint32_t d = I915_READ(ch_data + i);
+
+ unpack_aux(d, recv + i, recv_bytes - i);
+ }
+
+ return recv_bytes;
+}
+
+/* Write data to the aux channel in native mode */
+static int
+intel_dp_aux_native_write(struct intel_output *intel_output,
+ uint16_t address, uint8_t *send, int send_bytes)
+{
+ int ret;
+ uint8_t msg[20];
+ int msg_bytes;
+ uint8_t ack;
+
+ if (send_bytes > 16)
+ return -1;
+ msg[0] = AUX_NATIVE_WRITE << 4;
+ msg[1] = address >> 8;
+ msg[2] = address;
+ msg[3] = send_bytes - 1;
+ memcpy(&msg[4], send, send_bytes);
+ msg_bytes = send_bytes + 4;
+ for (;;) {
+ ret = intel_dp_aux_ch(intel_output, msg, msg_bytes, &ack, 1);
+ if (ret < 0)
+ return ret;
+ if ((ack & AUX_NATIVE_REPLY_MASK) == AUX_NATIVE_REPLY_ACK)
+ break;
+ else if ((ack & AUX_NATIVE_REPLY_MASK) == AUX_NATIVE_REPLY_DEFER)
+ udelay(100);
+ else
+ return -EIO;
+ }
+ return send_bytes;
+}
+
+/* Write a single byte to the aux channel in native mode */
+static int
+intel_dp_aux_native_write_1(struct intel_output *intel_output,
+ uint16_t address, uint8_t byte)
+{
+ return intel_dp_aux_native_write(intel_output, address, &byte, 1);
+}
+
+/* read bytes from a native aux channel */
+static int
+intel_dp_aux_native_read(struct intel_output *intel_output,
+ uint16_t address, uint8_t *recv, int recv_bytes)
+{
+ uint8_t msg[4];
+ int msg_bytes;
+ uint8_t reply[20];
+ int reply_bytes;
+ uint8_t ack;
+ int ret;
+
+ msg[0] = AUX_NATIVE_READ << 4;
+ msg[1] = address >> 8;
+ msg[2] = address & 0xff;
+ msg[3] = recv_bytes - 1;
+
+ msg_bytes = 4;
+ reply_bytes = recv_bytes + 1;
+
+ for (;;) {
+ ret = intel_dp_aux_ch(intel_output, msg, msg_bytes,
+ reply, reply_bytes);
+ if (ret == 0)
+ return -EPROTO;
+ if (ret < 0)
+ return ret;
+ ack = reply[0];
+ if ((ack & AUX_NATIVE_REPLY_MASK) == AUX_NATIVE_REPLY_ACK) {
+ memcpy(recv, reply + 1, ret - 1);
+ return ret - 1;
+ }
+ else if ((ack & AUX_NATIVE_REPLY_MASK) == AUX_NATIVE_REPLY_DEFER)
+ udelay(100);
+ else
+ return -EIO;
+ }
+}
+
+static int
+intel_dp_i2c_aux_ch(struct i2c_adapter *adapter,
+ uint8_t *send, int send_bytes,
+ uint8_t *recv, int recv_bytes)
+{
+ struct intel_dp_priv *dp_priv = container_of(adapter,
+ struct intel_dp_priv,
+ adapter);
+ struct intel_output *intel_output = dp_priv->intel_output;
+
+ return intel_dp_aux_ch(intel_output,
+ send, send_bytes, recv, recv_bytes);
+}
+
+static int
+intel_dp_i2c_init(struct intel_output *intel_output, const char *name)
+{
+ struct intel_dp_priv *dp_priv = intel_output->dev_priv;
+
+ DRM_ERROR("i2c_init %s\n", name);
+ dp_priv->algo.running = false;
+ dp_priv->algo.address = 0;
+ dp_priv->algo.aux_ch = intel_dp_i2c_aux_ch;
+
+ memset(&dp_priv->adapter, '\0', sizeof (dp_priv->adapter));
+ dp_priv->adapter.owner = THIS_MODULE;
+ dp_priv->adapter.class = I2C_CLASS_DDC;
+ strncpy (dp_priv->adapter.name, name, sizeof dp_priv->adapter.name - 1);
+ dp_priv->adapter.name[sizeof dp_priv->adapter.name - 1] = '\0';
+ dp_priv->adapter.algo_data = &dp_priv->algo;
+ dp_priv->adapter.dev.parent = &intel_output->base.kdev;
+
+ return i2c_dp_aux_add_bus(&dp_priv->adapter);
+}
+
+static bool
+intel_dp_mode_fixup(struct drm_encoder *encoder, struct drm_display_mode *mode,
+ struct drm_display_mode *adjusted_mode)
+{
+ struct intel_output *intel_output = enc_to_intel_output(encoder);
+ struct intel_dp_priv *dp_priv = intel_output->dev_priv;
+ int lane_count, clock;
+ int max_lane_count = intel_dp_max_lane_count(intel_output);
+ int max_clock = intel_dp_max_link_bw(intel_output) == DP_LINK_BW_2_7 ? 1 : 0;
+ static int bws[2] = { DP_LINK_BW_1_62, DP_LINK_BW_2_7 };
+
+ for (lane_count = 1; lane_count <= max_lane_count; lane_count <<= 1) {
+ for (clock = 0; clock <= max_clock; clock++) {
+ int link_avail = intel_dp_link_clock(bws[clock]) * lane_count;
+
+ if (intel_dp_link_required(mode->clock) <= link_avail) {
+ dp_priv->link_bw = bws[clock];
+ dp_priv->lane_count = lane_count;
+ adjusted_mode->clock = intel_dp_link_clock(dp_priv->link_bw);
+ DRM_DEBUG("Display port link bw %02x lane count %d clock %d\n",
+ dp_priv->link_bw, dp_priv->lane_count,
+ adjusted_mode->clock);
+ return true;
+ }
+ }
+ }
+ return false;
+}
+
+struct intel_dp_m_n {
+ uint32_t tu;
+ uint32_t gmch_m;
+ uint32_t gmch_n;
+ uint32_t link_m;
+ uint32_t link_n;
+};
+
+static void
+intel_reduce_ratio(uint32_t *num, uint32_t *den)
+{
+ while (*num > 0xffffff || *den > 0xffffff) {
+ *num >>= 1;
+ *den >>= 1;
+ }
+}
+
+static void
+intel_dp_compute_m_n(int bytes_per_pixel,
+ int nlanes,
+ int pixel_clock,
+ int link_clock,
+ struct intel_dp_m_n *m_n)
+{
+ m_n->tu = 64;
+ m_n->gmch_m = pixel_clock * bytes_per_pixel;
+ m_n->gmch_n = link_clock * nlanes;
+ intel_reduce_ratio(&m_n->gmch_m, &m_n->gmch_n);
+ m_n->link_m = pixel_clock;
+ m_n->link_n = link_clock;
+ intel_reduce_ratio(&m_n->link_m, &m_n->link_n);
+}
+
+void
+intel_dp_set_m_n(struct drm_crtc *crtc, struct drm_display_mode *mode,
+ struct drm_display_mode *adjusted_mode)
+{
+ struct drm_device *dev = crtc->dev;
+ struct drm_mode_config *mode_config = &dev->mode_config;
+ struct drm_connector *connector;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+ int lane_count = 4;
+ struct intel_dp_m_n m_n;
+
+ /*
+ * Find the lane count in the intel_output private
+ */
+ list_for_each_entry(connector, &mode_config->connector_list, head) {
+ struct intel_output *intel_output = to_intel_output(connector);
+ struct intel_dp_priv *dp_priv = intel_output->dev_priv;
+
+ if (!connector->encoder || connector->encoder->crtc != crtc)
+ continue;
+
+ if (intel_output->type == INTEL_OUTPUT_DISPLAYPORT) {
+ lane_count = dp_priv->lane_count;
+ break;
+ }
+ }
+
+ /*
+ * Compute the GMCH and Link ratios. The '3' here is
+ * the number of bytes_per_pixel post-LUT, which we always
+ * set up for 8-bits of R/G/B, or 3 bytes total.
+ */
+ intel_dp_compute_m_n(3, lane_count,
+ mode->clock, adjusted_mode->clock, &m_n);
+
+ if (intel_crtc->pipe == 0) {
+ I915_WRITE(PIPEA_GMCH_DATA_M,
+ ((m_n.tu - 1) << PIPE_GMCH_DATA_M_TU_SIZE_SHIFT) |
+ m_n.gmch_m);
+ I915_WRITE(PIPEA_GMCH_DATA_N,
+ m_n.gmch_n);
+ I915_WRITE(PIPEA_DP_LINK_M, m_n.link_m);
+ I915_WRITE(PIPEA_DP_LINK_N, m_n.link_n);
+ } else {
+ I915_WRITE(PIPEB_GMCH_DATA_M,
+ ((m_n.tu - 1) << PIPE_GMCH_DATA_M_TU_SIZE_SHIFT) |
+ m_n.gmch_m);
+ I915_WRITE(PIPEB_GMCH_DATA_N,
+ m_n.gmch_n);
+ I915_WRITE(PIPEB_DP_LINK_M, m_n.link_m);
+ I915_WRITE(PIPEB_DP_LINK_N, m_n.link_n);
+ }
+}
+
+static void
+intel_dp_mode_set(struct drm_encoder *encoder, struct drm_display_mode *mode,
+ struct drm_display_mode *adjusted_mode)
+{
+ struct intel_output *intel_output = enc_to_intel_output(encoder);
+ struct intel_dp_priv *dp_priv = intel_output->dev_priv;
+ struct drm_crtc *crtc = intel_output->enc.crtc;
+ struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+
+ dp_priv->DP = (DP_LINK_TRAIN_OFF |
+ DP_VOLTAGE_0_4 |
+ DP_PRE_EMPHASIS_0 |
+ DP_SYNC_VS_HIGH |
+ DP_SYNC_HS_HIGH);
+
+ switch (dp_priv->lane_count) {
+ case 1:
+ dp_priv->DP |= DP_PORT_WIDTH_1;
+ break;
+ case 2:
+ dp_priv->DP |= DP_PORT_WIDTH_2;
+ break;
+ case 4:
+ dp_priv->DP |= DP_PORT_WIDTH_4;
+ break;
+ }
+ if (dp_priv->has_audio)
+ dp_priv->DP |= DP_AUDIO_OUTPUT_ENABLE;
+
+ memset(dp_priv->link_configuration, 0, DP_LINK_CONFIGURATION_SIZE);
+ dp_priv->link_configuration[0] = dp_priv->link_bw;
+ dp_priv->link_configuration[1] = dp_priv->lane_count;
+
+ /*
+ * Check for DPCD version > 1.1,
+ * enable enahanced frame stuff in that case
+ */
+ if (dp_priv->dpcd[0] >= 0x11) {
+ dp_priv->link_configuration[1] |= DP_LANE_COUNT_ENHANCED_FRAME_EN;
+ dp_priv->DP |= DP_ENHANCED_FRAMING;
+ }
+
+ if (intel_crtc->pipe == 1)
+ dp_priv->DP |= DP_PIPEB_SELECT;
+}
+
+
+static void
+intel_dp_dpms(struct drm_encoder *encoder, int mode)
+{
+ struct intel_output *intel_output = enc_to_intel_output(encoder);
+ struct intel_dp_priv *dp_priv = intel_output->dev_priv;
+ struct drm_device *dev = intel_output->base.dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ uint32_t dp_reg = I915_READ(dp_priv->output_reg);
+
+ if (mode != DRM_MODE_DPMS_ON) {
+ if (dp_reg & DP_PORT_EN)
+ intel_dp_link_down(intel_output, dp_priv->DP);
+ } else {
+ if (!(dp_reg & DP_PORT_EN))
+ intel_dp_link_train(intel_output, dp_priv->DP, dp_priv->link_configuration);
+ }
+ dp_priv->dpms_mode = mode;
+}
+
+/*
+ * Fetch AUX CH registers 0x202 - 0x207 which contain
+ * link status information
+ */
+static bool
+intel_dp_get_link_status(struct intel_output *intel_output,
+ uint8_t link_status[DP_LINK_STATUS_SIZE])
+{
+ int ret;
+
+ ret = intel_dp_aux_native_read(intel_output,
+ DP_LANE0_1_STATUS,
+ link_status, DP_LINK_STATUS_SIZE);
+ if (ret != DP_LINK_STATUS_SIZE)
+ return false;
+ return true;
+}
+
+static uint8_t
+intel_dp_link_status(uint8_t link_status[DP_LINK_STATUS_SIZE],
+ int r)
+{
+ return link_status[r - DP_LANE0_1_STATUS];
+}
+
+static void
+intel_dp_save(struct drm_connector *connector)
+{
+ struct intel_output *intel_output = to_intel_output(connector);
+ struct drm_device *dev = intel_output->base.dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ struct intel_dp_priv *dp_priv = intel_output->dev_priv;
+
+ dp_priv->save_DP = I915_READ(dp_priv->output_reg);
+ intel_dp_aux_native_read(intel_output, DP_LINK_BW_SET,
+ dp_priv->save_link_configuration,
+ sizeof (dp_priv->save_link_configuration));
+}
+
+static uint8_t
+intel_get_adjust_request_voltage(uint8_t link_status[DP_LINK_STATUS_SIZE],
+ int lane)
+{
+ int i = DP_ADJUST_REQUEST_LANE0_1 + (lane >> 1);
+ int s = ((lane & 1) ?
+ DP_ADJUST_VOLTAGE_SWING_LANE1_SHIFT :
+ DP_ADJUST_VOLTAGE_SWING_LANE0_SHIFT);
+ uint8_t l = intel_dp_link_status(link_status, i);
+
+ return ((l >> s) & 3) << DP_TRAIN_VOLTAGE_SWING_SHIFT;
+}
+
+static uint8_t
+intel_get_adjust_request_pre_emphasis(uint8_t link_status[DP_LINK_STATUS_SIZE],
+ int lane)
+{
+ int i = DP_ADJUST_REQUEST_LANE0_1 + (lane >> 1);
+ int s = ((lane & 1) ?
+ DP_ADJUST_PRE_EMPHASIS_LANE1_SHIFT :
+ DP_ADJUST_PRE_EMPHASIS_LANE0_SHIFT);
+ uint8_t l = intel_dp_link_status(link_status, i);
+
+ return ((l >> s) & 3) << DP_TRAIN_PRE_EMPHASIS_SHIFT;
+}
+
+
+#if 0
+static char *voltage_names[] = {
+ "0.4V", "0.6V", "0.8V", "1.2V"
+};
+static char *pre_emph_names[] = {
+ "0dB", "3.5dB", "6dB", "9.5dB"
+};
+static char *link_train_names[] = {
+ "pattern 1", "pattern 2", "idle", "off"
+};
+#endif
+
+/*
+ * These are source-specific values; current Intel hardware supports
+ * a maximum voltage of 800mV and a maximum pre-emphasis of 6dB
+ */
+#define I830_DP_VOLTAGE_MAX DP_TRAIN_VOLTAGE_SWING_800
+
+static uint8_t
+intel_dp_pre_emphasis_max(uint8_t voltage_swing)
+{
+ switch (voltage_swing & DP_TRAIN_VOLTAGE_SWING_MASK) {
+ case DP_TRAIN_VOLTAGE_SWING_400:
+ return DP_TRAIN_PRE_EMPHASIS_6;
+ case DP_TRAIN_VOLTAGE_SWING_600:
+ return DP_TRAIN_PRE_EMPHASIS_6;
+ case DP_TRAIN_VOLTAGE_SWING_800:
+ return DP_TRAIN_PRE_EMPHASIS_3_5;
+ case DP_TRAIN_VOLTAGE_SWING_1200:
+ default:
+ return DP_TRAIN_PRE_EMPHASIS_0;
+ }
+}
+
+static void
+intel_get_adjust_train(struct intel_output *intel_output,
+ uint8_t link_status[DP_LINK_STATUS_SIZE],
+ int lane_count,
+ uint8_t train_set[4])
+{
+ uint8_t v = 0;
+ uint8_t p = 0;
+ int lane;
+
+ for (lane = 0; lane < lane_count; lane++) {
+ uint8_t this_v = intel_get_adjust_request_voltage(link_status, lane);
+ uint8_t this_p = intel_get_adjust_request_pre_emphasis(link_status, lane);
+
+ if (this_v > v)
+ v = this_v;
+ if (this_p > p)
+ p = this_p;
+ }
+
+ if (v >= I830_DP_VOLTAGE_MAX)
+ v = I830_DP_VOLTAGE_MAX | DP_TRAIN_MAX_SWING_REACHED;
+
+ if (p >= intel_dp_pre_emphasis_max(v))
+ p = intel_dp_pre_emphasis_max(v) | DP_TRAIN_MAX_PRE_EMPHASIS_REACHED;
+
+ for (lane = 0; lane < 4; lane++)
+ train_set[lane] = v | p;
+}
+
+static uint32_t
+intel_dp_signal_levels(uint8_t train_set, int lane_count)
+{
+ uint32_t signal_levels = 0;
+
+ switch (train_set & DP_TRAIN_VOLTAGE_SWING_MASK) {
+ case DP_TRAIN_VOLTAGE_SWING_400:
+ default:
+ signal_levels |= DP_VOLTAGE_0_4;
+ break;
+ case DP_TRAIN_VOLTAGE_SWING_600:
+ signal_levels |= DP_VOLTAGE_0_6;
+ break;
+ case DP_TRAIN_VOLTAGE_SWING_800:
+ signal_levels |= DP_VOLTAGE_0_8;
+ break;
+ case DP_TRAIN_VOLTAGE_SWING_1200:
+ signal_levels |= DP_VOLTAGE_1_2;
+ break;
+ }
+ switch (train_set & DP_TRAIN_PRE_EMPHASIS_MASK) {
+ case DP_TRAIN_PRE_EMPHASIS_0:
+ default:
+ signal_levels |= DP_PRE_EMPHASIS_0;
+ break;
+ case DP_TRAIN_PRE_EMPHASIS_3_5:
+ signal_levels |= DP_PRE_EMPHASIS_3_5;
+ break;
+ case DP_TRAIN_PRE_EMPHASIS_6:
+ signal_levels |= DP_PRE_EMPHASIS_6;
+ break;
+ case DP_TRAIN_PRE_EMPHASIS_9_5:
+ signal_levels |= DP_PRE_EMPHASIS_9_5;
+ break;
+ }
+ return signal_levels;
+}
+
+static uint8_t
+intel_get_lane_status(uint8_t link_status[DP_LINK_STATUS_SIZE],
+ int lane)
+{
+ int i = DP_LANE0_1_STATUS + (lane >> 1);
+ int s = (lane & 1) * 4;
+ uint8_t l = intel_dp_link_status(link_status, i);
+
+ return (l >> s) & 0xf;
+}
+
+/* Check for clock recovery is done on all channels */
+static bool
+intel_clock_recovery_ok(uint8_t link_status[DP_LINK_STATUS_SIZE], int lane_count)
+{
+ int lane;
+ uint8_t lane_status;
+
+ for (lane = 0; lane < lane_count; lane++) {
+ lane_status = intel_get_lane_status(link_status, lane);
+ if ((lane_status & DP_LANE_CR_DONE) == 0)
+ return false;
+ }
+ return true;
+}
+
+/* Check to see if channel eq is done on all channels */
+#define CHANNEL_EQ_BITS (DP_LANE_CR_DONE|\
+ DP_LANE_CHANNEL_EQ_DONE|\
+ DP_LANE_SYMBOL_LOCKED)
+static bool
+intel_channel_eq_ok(uint8_t link_status[DP_LINK_STATUS_SIZE], int lane_count)
+{
+ uint8_t lane_align;
+ uint8_t lane_status;
+ int lane;
+
+ lane_align = intel_dp_link_status(link_status,
+ DP_LANE_ALIGN_STATUS_UPDATED);
+ if ((lane_align & DP_INTERLANE_ALIGN_DONE) == 0)
+ return false;
+ for (lane = 0; lane < lane_count; lane++) {
+ lane_status = intel_get_lane_status(link_status, lane);
+ if ((lane_status & CHANNEL_EQ_BITS) != CHANNEL_EQ_BITS)
+ return false;
+ }
+ return true;
+}
+
+static bool
+intel_dp_set_link_train(struct intel_output *intel_output,
+ uint32_t dp_reg_value,
+ uint8_t dp_train_pat,
+ uint8_t train_set[4],
+ bool first)
+{
+ struct drm_device *dev = intel_output->base.dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ struct intel_dp_priv *dp_priv = intel_output->dev_priv;
+ int ret;
+
+ I915_WRITE(dp_priv->output_reg, dp_reg_value);
+ POSTING_READ(dp_priv->output_reg);
+ if (first)
+ intel_wait_for_vblank(dev);
+
+ intel_dp_aux_native_write_1(intel_output,
+ DP_TRAINING_PATTERN_SET,
+ dp_train_pat);
+
+ ret = intel_dp_aux_native_write(intel_output,
+ DP_TRAINING_LANE0_SET, train_set, 4);
+ if (ret != 4)
+ return false;
+
+ return true;
+}
+
+static void
+intel_dp_link_train(struct intel_output *intel_output, uint32_t DP,
+ uint8_t link_configuration[DP_LINK_CONFIGURATION_SIZE])
+{
+ struct drm_device *dev = intel_output->base.dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ struct intel_dp_priv *dp_priv = intel_output->dev_priv;
+ uint8_t train_set[4];
+ uint8_t link_status[DP_LINK_STATUS_SIZE];
+ int i;
+ uint8_t voltage;
+ bool clock_recovery = false;
+ bool channel_eq = false;
+ bool first = true;
+ int tries;
+
+ /* Write the link configuration data */
+ intel_dp_aux_native_write(intel_output, 0x100,
+ link_configuration, DP_LINK_CONFIGURATION_SIZE);
+
+ DP |= DP_PORT_EN;
+ DP &= ~DP_LINK_TRAIN_MASK;
+ memset(train_set, 0, 4);
+ voltage = 0xff;
+ tries = 0;
+ clock_recovery = false;
+ for (;;) {
+ /* Use train_set[0] to set the voltage and pre emphasis values */
+ uint32_t signal_levels = intel_dp_signal_levels(train_set[0], dp_priv->lane_count);
+ DP = (DP & ~(DP_VOLTAGE_MASK|DP_PRE_EMPHASIS_MASK)) | signal_levels;
+
+ if (!intel_dp_set_link_train(intel_output, DP | DP_LINK_TRAIN_PAT_1,
+ DP_TRAINING_PATTERN_1, train_set, first))
+ break;
+ first = false;
+ /* Set training pattern 1 */
+
+ udelay(100);
+ if (!intel_dp_get_link_status(intel_output, link_status))
+ break;
+
+ if (intel_clock_recovery_ok(link_status, dp_priv->lane_count)) {
+ clock_recovery = true;
+ break;
+ }
+
+ /* Check to see if we've tried the max voltage */
+ for (i = 0; i < dp_priv->lane_count; i++)
+ if ((train_set[i] & DP_TRAIN_MAX_SWING_REACHED) == 0)
+ break;
+ if (i == dp_priv->lane_count)
+ break;
+
+ /* Check to see if we've tried the same voltage 5 times */
+ if ((train_set[0] & DP_TRAIN_VOLTAGE_SWING_MASK) == voltage) {
+ ++tries;
+ if (tries == 5)
+ break;
+ } else
+ tries = 0;
+ voltage = train_set[0] & DP_TRAIN_VOLTAGE_SWING_MASK;
+
+ /* Compute new train_set as requested by target */
+ intel_get_adjust_train(intel_output, link_status, dp_priv->lane_count, train_set);
+ }
+
+ /* channel equalization */
+ tries = 0;
+ channel_eq = false;
+ for (;;) {
+ /* Use train_set[0] to set the voltage and pre emphasis values */
+ uint32_t signal_levels = intel_dp_signal_levels(train_set[0], dp_priv->lane_count);
+ DP = (DP & ~(DP_VOLTAGE_MASK|DP_PRE_EMPHASIS_MASK)) | signal_levels;
+
+ /* channel eq pattern */
+ if (!intel_dp_set_link_train(intel_output, DP | DP_LINK_TRAIN_PAT_2,
+ DP_TRAINING_PATTERN_2, train_set,
+ false))
+ break;
+
+ udelay(400);
+ if (!intel_dp_get_link_status(intel_output, link_status))
+ break;
+
+ if (intel_channel_eq_ok(link_status, dp_priv->lane_count)) {
+ channel_eq = true;
+ break;
+ }
+
+ /* Try 5 times */
+ if (tries > 5)
+ break;
+
+ /* Compute new train_set as requested by target */
+ intel_get_adjust_train(intel_output, link_status, dp_priv->lane_count, train_set);
+ ++tries;
+ }
+
+ I915_WRITE(dp_priv->output_reg, DP | DP_LINK_TRAIN_OFF);
+ POSTING_READ(dp_priv->output_reg);
+ intel_dp_aux_native_write_1(intel_output,
+ DP_TRAINING_PATTERN_SET, DP_TRAINING_PATTERN_DISABLE);
+}
+
+static void
+intel_dp_link_down(struct intel_output *intel_output, uint32_t DP)
+{
+ struct drm_device *dev = intel_output->base.dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ struct intel_dp_priv *dp_priv = intel_output->dev_priv;
+
+ I915_WRITE(dp_priv->output_reg, DP & ~DP_PORT_EN);
+ POSTING_READ(dp_priv->output_reg);
+}
+
+static void
+intel_dp_restore(struct drm_connector *connector)
+{
+ struct intel_output *intel_output = to_intel_output(connector);
+ struct intel_dp_priv *dp_priv = intel_output->dev_priv;
+
+ if (dp_priv->save_DP & DP_PORT_EN)
+ intel_dp_link_train(intel_output, dp_priv->save_DP, dp_priv->save_link_configuration);
+ else
+ intel_dp_link_down(intel_output, dp_priv->save_DP);
+}
+
+/*
+ * According to DP spec
+ * 5.1.2:
+ * 1. Read DPCD
+ * 2. Configure link according to Receiver Capabilities
+ * 3. Use Link Training from 2.5.3.3 and 3.5.1.3
+ * 4. Check link status on receipt of hot-plug interrupt
+ */
+
+static void
+intel_dp_check_link_status(struct intel_output *intel_output)
+{
+ struct intel_dp_priv *dp_priv = intel_output->dev_priv;
+ uint8_t link_status[DP_LINK_STATUS_SIZE];
+
+ if (!intel_output->enc.crtc)
+ return;
+
+ if (!intel_dp_get_link_status(intel_output, link_status)) {
+ intel_dp_link_down(intel_output, dp_priv->DP);
+ return;
+ }
+
+ if (!intel_channel_eq_ok(link_status, dp_priv->lane_count))
+ intel_dp_link_train(intel_output, dp_priv->DP, dp_priv->link_configuration);
+}
+
+/**
+ * Uses CRT_HOTPLUG_EN and CRT_HOTPLUG_STAT to detect DP connection.
+ *
+ * \return true if DP port is connected.
+ * \return false if DP port is disconnected.
+ */
+static enum drm_connector_status
+intel_dp_detect(struct drm_connector *connector)
+{
+ struct intel_output *intel_output = to_intel_output(connector);
+ struct drm_device *dev = intel_output->base.dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ struct intel_dp_priv *dp_priv = intel_output->dev_priv;
+ uint32_t temp, bit;
+ enum drm_connector_status status;
+
+ dp_priv->has_audio = false;
+
+ temp = I915_READ(PORT_HOTPLUG_EN);
+
+ I915_WRITE(PORT_HOTPLUG_EN,
+ temp |
+ DPB_HOTPLUG_INT_EN |
+ DPC_HOTPLUG_INT_EN |
+ DPD_HOTPLUG_INT_EN);
+
+ POSTING_READ(PORT_HOTPLUG_EN);
+
+ switch (dp_priv->output_reg) {
+ case DP_B:
+ bit = DPB_HOTPLUG_INT_STATUS;
+ break;
+ case DP_C:
+ bit = DPC_HOTPLUG_INT_STATUS;
+ break;
+ case DP_D:
+ bit = DPD_HOTPLUG_INT_STATUS;
+ break;
+ default:
+ return connector_status_unknown;
+ }
+
+ temp = I915_READ(PORT_HOTPLUG_STAT);
+
+ if ((temp & bit) == 0)
+ return connector_status_disconnected;
+
+ status = connector_status_disconnected;
+ if (intel_dp_aux_native_read(intel_output,
+ 0x000, dp_priv->dpcd,
+ sizeof (dp_priv->dpcd)) == sizeof (dp_priv->dpcd))
+ {
+ if (dp_priv->dpcd[0] != 0)
+ status = connector_status_connected;
+ }
+ return status;
+}
+
+static int intel_dp_get_modes(struct drm_connector *connector)
+{
+ struct intel_output *intel_output = to_intel_output(connector);
+
+ /* We should parse the EDID data and find out if it has an audio sink
+ */
+
+ return intel_ddc_get_modes(intel_output);
+}
+
+static void
+intel_dp_destroy (struct drm_connector *connector)
+{
+ struct intel_output *intel_output = to_intel_output(connector);
+
+ if (intel_output->i2c_bus)
+ intel_i2c_destroy(intel_output->i2c_bus);
+ drm_sysfs_connector_remove(connector);
+ drm_connector_cleanup(connector);
+ kfree(intel_output);
+}
+
+static const struct drm_encoder_helper_funcs intel_dp_helper_funcs = {
+ .dpms = intel_dp_dpms,
+ .mode_fixup = intel_dp_mode_fixup,
+ .prepare = intel_encoder_prepare,
+ .mode_set = intel_dp_mode_set,
+ .commit = intel_encoder_commit,
+};
+
+static const struct drm_connector_funcs intel_dp_connector_funcs = {
+ .dpms = drm_helper_connector_dpms,
+ .save = intel_dp_save,
+ .restore = intel_dp_restore,
+ .detect = intel_dp_detect,
+ .fill_modes = drm_helper_probe_single_connector_modes,
+ .destroy = intel_dp_destroy,
+};
+
+static const struct drm_connector_helper_funcs intel_dp_connector_helper_funcs = {
+ .get_modes = intel_dp_get_modes,
+ .mode_valid = intel_dp_mode_valid,
+ .best_encoder = intel_best_encoder,
+};
+
+static void intel_dp_enc_destroy(struct drm_encoder *encoder)
+{
+ drm_encoder_cleanup(encoder);
+}
+
+static const struct drm_encoder_funcs intel_dp_enc_funcs = {
+ .destroy = intel_dp_enc_destroy,
+};
+
+void
+intel_dp_hot_plug(struct intel_output *intel_output)
+{
+ struct intel_dp_priv *dp_priv = intel_output->dev_priv;
+
+ if (dp_priv->dpms_mode == DRM_MODE_DPMS_ON)
+ intel_dp_check_link_status(intel_output);
+}
+
+void
+intel_dp_init(struct drm_device *dev, int output_reg)
+{
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ struct drm_connector *connector;
+ struct intel_output *intel_output;
+ struct intel_dp_priv *dp_priv;
+
+ intel_output = kcalloc(sizeof(struct intel_output) +
+ sizeof(struct intel_dp_priv), 1, GFP_KERNEL);
+ if (!intel_output)
+ return;
+
+ dp_priv = (struct intel_dp_priv *)(intel_output + 1);
+
+ connector = &intel_output->base;
+ drm_connector_init(dev, connector, &intel_dp_connector_funcs,
+ DRM_MODE_CONNECTOR_DisplayPort);
+ drm_connector_helper_add(connector, &intel_dp_connector_helper_funcs);
+
+ intel_output->type = INTEL_OUTPUT_DISPLAYPORT;
+
+ connector->interlace_allowed = true;
+ connector->doublescan_allowed = 0;
+
+ dp_priv->intel_output = intel_output;
+ dp_priv->output_reg = output_reg;
+ dp_priv->has_audio = false;
+ dp_priv->dpms_mode = DRM_MODE_DPMS_ON;
+ intel_output->dev_priv = dp_priv;
+
+ drm_encoder_init(dev, &intel_output->enc, &intel_dp_enc_funcs,
+ DRM_MODE_ENCODER_TMDS);
+ drm_encoder_helper_add(&intel_output->enc, &intel_dp_helper_funcs);
+
+ drm_mode_connector_attach_encoder(&intel_output->base,
+ &intel_output->enc);
+ drm_sysfs_connector_add(connector);
+
+ /* Set up the DDC bus. */
+ intel_dp_i2c_init(intel_output,
+ (output_reg == DP_B) ? "DPDDC-B" :
+ (output_reg == DP_C) ? "DPDDC-C" : "DPDDC-D");
+ intel_output->ddc_bus = &dp_priv->adapter;
+ intel_output->hot_plug = intel_dp_hot_plug;
+
+ /* For G4X desktop chip, PEG_BAND_GAP_DATA 3:0 must first be written
+ * 0xd. Failure to do so will result in spurious interrupts being
+ * generated on the port when a cable is not attached.
+ */
+ if (IS_G4X(dev) && !IS_GM45(dev)) {
+ u32 temp = I915_READ(PEG_BAND_GAP_DATA);
+ I915_WRITE(PEG_BAND_GAP_DATA, (temp & ~0xf) | 0xd);
+ }
+}
diff --git a/drivers/gpu/drm/i915/intel_dp.h b/drivers/gpu/drm/i915/intel_dp.h
new file mode 100644
index 0000000..2b38054
--- /dev/null
+++ b/drivers/gpu/drm/i915/intel_dp.h
@@ -0,0 +1,144 @@
+/*
+ * Copyright © 2008 Keith Packard
+ *
+ * Permission to use, copy, modify, distribute, and sell this software and its
+ * documentation for any purpose is hereby granted without fee, provided that
+ * the above copyright notice appear in all copies and that both that copyright
+ * notice and this permission notice appear in supporting documentation, and
+ * that the name of the copyright holders not be used in advertising or
+ * publicity pertaining to distribution of the software without specific,
+ * written prior permission. The copyright holders make no representations
+ * about the suitability of this software for any purpose. It is provided "as
+ * is" without express or implied warranty.
+ *
+ * THE COPYRIGHT HOLDERS DISCLAIM ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
+ * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
+ * EVENT SHALL THE COPYRIGHT HOLDERS BE LIABLE FOR ANY SPECIAL, INDIRECT OR
+ * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE,
+ * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
+ * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE
+ * OF THIS SOFTWARE.
+ */
+
+#ifndef _INTEL_DP_H_
+#define _INTEL_DP_H_
+
+/* From the VESA DisplayPort spec */
+
+#define AUX_NATIVE_WRITE 0x8
+#define AUX_NATIVE_READ 0x9
+#define AUX_I2C_WRITE 0x0
+#define AUX_I2C_READ 0x1
+#define AUX_I2C_STATUS 0x2
+#define AUX_I2C_MOT 0x4
+
+#define AUX_NATIVE_REPLY_ACK (0x0 << 4)
+#define AUX_NATIVE_REPLY_NACK (0x1 << 4)
+#define AUX_NATIVE_REPLY_DEFER (0x2 << 4)
+#define AUX_NATIVE_REPLY_MASK (0x3 << 4)
+
+#define AUX_I2C_REPLY_ACK (0x0 << 6)
+#define AUX_I2C_REPLY_NACK (0x1 << 6)
+#define AUX_I2C_REPLY_DEFER (0x2 << 6)
+#define AUX_I2C_REPLY_MASK (0x3 << 6)
+
+/* AUX CH addresses */
+#define DP_LINK_BW_SET 0x100
+# define DP_LINK_BW_1_62 0x06
+# define DP_LINK_BW_2_7 0x0a
+
+#define DP_LANE_COUNT_SET 0x101
+# define DP_LANE_COUNT_MASK 0x0f
+# define DP_LANE_COUNT_ENHANCED_FRAME_EN (1 << 7)
+
+#define DP_TRAINING_PATTERN_SET 0x102
+
+# define DP_TRAINING_PATTERN_DISABLE 0
+# define DP_TRAINING_PATTERN_1 1
+# define DP_TRAINING_PATTERN_2 2
+# define DP_TRAINING_PATTERN_MASK 0x3
+
+# define DP_LINK_QUAL_PATTERN_DISABLE (0 << 2)
+# define DP_LINK_QUAL_PATTERN_D10_2 (1 << 2)
+# define DP_LINK_QUAL_PATTERN_ERROR_RATE (2 << 2)
+# define DP_LINK_QUAL_PATTERN_PRBS7 (3 << 2)
+# define DP_LINK_QUAL_PATTERN_MASK (3 << 2)
+
+# define DP_RECOVERED_CLOCK_OUT_EN (1 << 4)
+# define DP_LINK_SCRAMBLING_DISABLE (1 << 5)
+
+# define DP_SYMBOL_ERROR_COUNT_BOTH (0 << 6)
+# define DP_SYMBOL_ERROR_COUNT_DISPARITY (1 << 6)
+# define DP_SYMBOL_ERROR_COUNT_SYMBOL (2 << 6)
+# define DP_SYMBOL_ERROR_COUNT_MASK (3 << 6)
+
+#define DP_TRAINING_LANE0_SET 0x103
+#define DP_TRAINING_LANE1_SET 0x104
+#define DP_TRAINING_LANE2_SET 0x105
+#define DP_TRAINING_LANE3_SET 0x106
+
+# define DP_TRAIN_VOLTAGE_SWING_MASK 0x3
+# define DP_TRAIN_VOLTAGE_SWING_SHIFT 0
+# define DP_TRAIN_MAX_SWING_REACHED (1 << 2)
+# define DP_TRAIN_VOLTAGE_SWING_400 (0 << 0)
+# define DP_TRAIN_VOLTAGE_SWING_600 (1 << 0)
+# define DP_TRAIN_VOLTAGE_SWING_800 (2 << 0)
+# define DP_TRAIN_VOLTAGE_SWING_1200 (3 << 0)
+
+# define DP_TRAIN_PRE_EMPHASIS_MASK (3 << 3)
+# define DP_TRAIN_PRE_EMPHASIS_0 (0 << 3)
+# define DP_TRAIN_PRE_EMPHASIS_3_5 (1 << 3)
+# define DP_TRAIN_PRE_EMPHASIS_6 (2 << 3)
+# define DP_TRAIN_PRE_EMPHASIS_9_5 (3 << 3)
+
+# define DP_TRAIN_PRE_EMPHASIS_SHIFT 3
+# define DP_TRAIN_MAX_PRE_EMPHASIS_REACHED (1 << 5)
+
+#define DP_DOWNSPREAD_CTRL 0x107
+# define DP_SPREAD_AMP_0_5 (1 << 4)
+
+#define DP_MAIN_LINK_CHANNEL_CODING_SET 0x108
+# define DP_SET_ANSI_8B10B (1 << 0)
+
+#define DP_LANE0_1_STATUS 0x202
+#define DP_LANE2_3_STATUS 0x203
+
+# define DP_LANE_CR_DONE (1 << 0)
+# define DP_LANE_CHANNEL_EQ_DONE (1 << 1)
+# define DP_LANE_SYMBOL_LOCKED (1 << 2)
+
+#define DP_LANE_ALIGN_STATUS_UPDATED 0x204
+
+#define DP_INTERLANE_ALIGN_DONE (1 << 0)
+#define DP_DOWNSTREAM_PORT_STATUS_CHANGED (1 << 6)
+#define DP_LINK_STATUS_UPDATED (1 << 7)
+
+#define DP_SINK_STATUS 0x205
+
+#define DP_RECEIVE_PORT_0_STATUS (1 << 0)
+#define DP_RECEIVE_PORT_1_STATUS (1 << 1)
+
+#define DP_ADJUST_REQUEST_LANE0_1 0x206
+#define DP_ADJUST_REQUEST_LANE2_3 0x207
+
+#define DP_ADJUST_VOLTAGE_SWING_LANE0_MASK 0x03
+#define DP_ADJUST_VOLTAGE_SWING_LANE0_SHIFT 0
+#define DP_ADJUST_PRE_EMPHASIS_LANE0_MASK 0x0c
+#define DP_ADJUST_PRE_EMPHASIS_LANE0_SHIFT 2
+#define DP_ADJUST_VOLTAGE_SWING_LANE1_MASK 0x30
+#define DP_ADJUST_VOLTAGE_SWING_LANE1_SHIFT 4
+#define DP_ADJUST_PRE_EMPHASIS_LANE1_MASK 0xc0
+#define DP_ADJUST_PRE_EMPHASIS_LANE1_SHIFT 6
+
+struct i2c_algo_dp_aux_data {
+ bool running;
+ u16 address;
+ int (*aux_ch) (struct i2c_adapter *adapter,
+ uint8_t *send, int send_bytes,
+ uint8_t *recv, int recv_bytes);
+};
+
+int
+i2c_dp_aux_add_bus(struct i2c_adapter *adapter);
+
+#endif /* _INTEL_DP_H_ */
diff --git a/drivers/gpu/drm/i915/intel_dp_i2c.c b/drivers/gpu/drm/i915/intel_dp_i2c.c
new file mode 100644
index 0000000..a63b6f5
--- /dev/null
+++ b/drivers/gpu/drm/i915/intel_dp_i2c.c
@@ -0,0 +1,273 @@
+/*
+ * Copyright © 2009 Keith Packard
+ *
+ * Permission to use, copy, modify, distribute, and sell this software and its
+ * documentation for any purpose is hereby granted without fee, provided that
+ * the above copyright notice appear in all copies and that both that copyright
+ * notice and this permission notice appear in supporting documentation, and
+ * that the name of the copyright holders not be used in advertising or
+ * publicity pertaining to distribution of the software without specific,
+ * written prior permission. The copyright holders make no representations
+ * about the suitability of this software for any purpose. It is provided "as
+ * is" without express or implied warranty.
+ *
+ * THE COPYRIGHT HOLDERS DISCLAIM ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
+ * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
+ * EVENT SHALL THE COPYRIGHT HOLDERS BE LIABLE FOR ANY SPECIAL, INDIRECT OR
+ * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE,
+ * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
+ * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE
+ * OF THIS SOFTWARE.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/sched.h>
+#include <linux/i2c.h>
+#include "intel_dp.h"
+#include "drmP.h"
+
+/* Run a single AUX_CH I2C transaction, writing/reading data as necessary */
+
+#define MODE_I2C_START 1
+#define MODE_I2C_WRITE 2
+#define MODE_I2C_READ 4
+#define MODE_I2C_STOP 8
+
+static int
+i2c_algo_dp_aux_transaction(struct i2c_adapter *adapter, int mode,
+ uint8_t write_byte, uint8_t *read_byte)
+{
+ struct i2c_algo_dp_aux_data *algo_data = adapter->algo_data;
+ uint16_t address = algo_data->address;
+ uint8_t msg[5];
+ uint8_t reply[2];
+ int msg_bytes;
+ int reply_bytes;
+ int ret;
+
+ /* Set up the command byte */
+ if (mode & MODE_I2C_READ)
+ msg[0] = AUX_I2C_READ << 4;
+ else
+ msg[0] = AUX_I2C_WRITE << 4;
+
+ if (!(mode & MODE_I2C_STOP))
+ msg[0] |= AUX_I2C_MOT << 4;
+
+ msg[1] = address >> 8;
+ msg[2] = address;
+
+ switch (mode) {
+ case MODE_I2C_WRITE:
+ msg[3] = 0;
+ msg[4] = write_byte;
+ msg_bytes = 5;
+ reply_bytes = 1;
+ break;
+ case MODE_I2C_READ:
+ msg[3] = 0;
+ msg_bytes = 4;
+ reply_bytes = 2;
+ break;
+ default:
+ msg_bytes = 3;
+ reply_bytes = 1;
+ break;
+ }
+
+ for (;;) {
+ ret = (*algo_data->aux_ch)(adapter,
+ msg, msg_bytes,
+ reply, reply_bytes);
+ if (ret < 0) {
+ DRM_DEBUG("aux_ch failed %d\n", ret);
+ return ret;
+ }
+ switch (reply[0] & AUX_I2C_REPLY_MASK) {
+ case AUX_I2C_REPLY_ACK:
+ if (mode == MODE_I2C_READ) {
+ *read_byte = reply[1];
+ }
+ return reply_bytes - 1;
+ case AUX_I2C_REPLY_NACK:
+ DRM_DEBUG("aux_ch nack\n");
+ return -EREMOTEIO;
+ case AUX_I2C_REPLY_DEFER:
+ DRM_DEBUG("aux_ch defer\n");
+ udelay(100);
+ break;
+ default:
+ DRM_ERROR("aux_ch invalid reply 0x%02x\n", reply[0]);
+ return -EREMOTEIO;
+ }
+ }
+}
+
+/*
+ * I2C over AUX CH
+ */
+
+/*
+ * Send the address. If the I2C link is running, this 'restarts'
+ * the connection with the new address, this is used for doing
+ * a write followed by a read (as needed for DDC)
+ */
+static int
+i2c_algo_dp_aux_address(struct i2c_adapter *adapter, u16 address, bool reading)
+{
+ struct i2c_algo_dp_aux_data *algo_data = adapter->algo_data;
+ int mode = MODE_I2C_START;
+ int ret;
+
+ if (reading)
+ mode |= MODE_I2C_READ;
+ else
+ mode |= MODE_I2C_WRITE;
+ algo_data->address = address;
+ algo_data->running = true;
+ ret = i2c_algo_dp_aux_transaction(adapter, mode, 0, NULL);
+ return ret;
+}
+
+/*
+ * Stop the I2C transaction. This closes out the link, sending
+ * a bare address packet with the MOT bit turned off
+ */
+static void
+i2c_algo_dp_aux_stop(struct i2c_adapter *adapter, bool reading)
+{
+ struct i2c_algo_dp_aux_data *algo_data = adapter->algo_data;
+ int mode = MODE_I2C_STOP;
+
+ if (reading)
+ mode |= MODE_I2C_READ;
+ else
+ mode |= MODE_I2C_WRITE;
+ if (algo_data->running) {
+ (void) i2c_algo_dp_aux_transaction(adapter, mode, 0, NULL);
+ algo_data->running = false;
+ }
+}
+
+/*
+ * Write a single byte to the current I2C address, the
+ * the I2C link must be running or this returns -EIO
+ */
+static int
+i2c_algo_dp_aux_put_byte(struct i2c_adapter *adapter, u8 byte)
+{
+ struct i2c_algo_dp_aux_data *algo_data = adapter->algo_data;
+ int ret;
+
+ if (!algo_data->running)
+ return -EIO;
+
+ ret = i2c_algo_dp_aux_transaction(adapter, MODE_I2C_WRITE, byte, NULL);
+ return ret;
+}
+
+/*
+ * Read a single byte from the current I2C address, the
+ * I2C link must be running or this returns -EIO
+ */
+static int
+i2c_algo_dp_aux_get_byte(struct i2c_adapter *adapter, u8 *byte_ret)
+{
+ struct i2c_algo_dp_aux_data *algo_data = adapter->algo_data;
+ int ret;
+
+ if (!algo_data->running)
+ return -EIO;
+
+ ret = i2c_algo_dp_aux_transaction(adapter, MODE_I2C_READ, 0, byte_ret);
+ return ret;
+}
+
+static int
+i2c_algo_dp_aux_xfer(struct i2c_adapter *adapter,
+ struct i2c_msg *msgs,
+ int num)
+{
+ int ret = 0;
+ bool reading = false;
+ int m;
+ int b;
+
+ for (m = 0; m < num; m++) {
+ u16 len = msgs[m].len;
+ u8 *buf = msgs[m].buf;
+ reading = (msgs[m].flags & I2C_M_RD) != 0;
+ ret = i2c_algo_dp_aux_address(adapter, msgs[m].addr, reading);
+ if (ret < 0)
+ break;
+ if (reading) {
+ for (b = 0; b < len; b++) {
+ ret = i2c_algo_dp_aux_get_byte(adapter, &buf[b]);
+ if (ret < 0)
+ break;
+ }
+ } else {
+ for (b = 0; b < len; b++) {
+ ret = i2c_algo_dp_aux_put_byte(adapter, buf[b]);
+ if (ret < 0)
+ break;
+ }
+ }
+ if (ret < 0)
+ break;
+ }
+ if (ret >= 0)
+ ret = num;
+ i2c_algo_dp_aux_stop(adapter, reading);
+ DRM_DEBUG("dp_aux_xfer return %d\n", ret);
+ return ret;
+}
+
+static u32
+i2c_algo_dp_aux_functionality(struct i2c_adapter *adapter)
+{
+ return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL |
+ I2C_FUNC_SMBUS_READ_BLOCK_DATA |
+ I2C_FUNC_SMBUS_BLOCK_PROC_CALL |
+ I2C_FUNC_10BIT_ADDR;
+}
+
+static const struct i2c_algorithm i2c_dp_aux_algo = {
+ .master_xfer = i2c_algo_dp_aux_xfer,
+ .functionality = i2c_algo_dp_aux_functionality,
+};
+
+static void
+i2c_dp_aux_reset_bus(struct i2c_adapter *adapter)
+{
+ (void) i2c_algo_dp_aux_address(adapter, 0, false);
+ (void) i2c_algo_dp_aux_stop(adapter, false);
+
+}
+
+static int
+i2c_dp_aux_prepare_bus(struct i2c_adapter *adapter)
+{
+ adapter->algo = &i2c_dp_aux_algo;
+ adapter->retries = 3;
+ i2c_dp_aux_reset_bus(adapter);
+ return 0;
+}
+
+int
+i2c_dp_aux_add_bus(struct i2c_adapter *adapter)
+{
+ int error;
+
+ error = i2c_dp_aux_prepare_bus(adapter);
+ if (error)
+ return error;
+ error = i2c_add_adapter(adapter);
+ return error;
+}
+EXPORT_SYMBOL(i2c_dp_aux_add_bus);
diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
index cd4b9c5..004541c 100644
--- a/drivers/gpu/drm/i915/intel_drv.h
+++ b/drivers/gpu/drm/i915/intel_drv.h
@@ -54,6 +54,7 @@
#define INTEL_OUTPUT_LVDS 4
#define INTEL_OUTPUT_TVOUT 5
#define INTEL_OUTPUT_HDMI 6
+#define INTEL_OUTPUT_DISPLAYPORT 7
#define INTEL_DVO_CHIP_NONE 0
#define INTEL_DVO_CHIP_LVDS 1
@@ -65,7 +66,6 @@
u32 reg; /* GPIO reg */
struct i2c_adapter adapter;
struct i2c_algo_bit_data algo;
- u8 slave_addr;
};
struct intel_framebuffer {
@@ -79,11 +79,12 @@
struct drm_encoder enc;
int type;
- struct intel_i2c_chan *i2c_bus; /* for control functions */
- struct intel_i2c_chan *ddc_bus; /* for DDC only stuff */
+ struct i2c_adapter *i2c_bus;
+ struct i2c_adapter *ddc_bus;
bool load_detect_temp;
bool needs_tv_clock;
void *dev_priv;
+ void (*hot_plug)(struct intel_output *);
};
struct intel_crtc {
@@ -104,9 +105,9 @@
#define enc_to_intel_output(x) container_of(x, struct intel_output, enc)
#define to_intel_framebuffer(x) container_of(x, struct intel_framebuffer, base)
-struct intel_i2c_chan *intel_i2c_create(struct drm_device *dev, const u32 reg,
- const char *name);
-void intel_i2c_destroy(struct intel_i2c_chan *chan);
+struct i2c_adapter *intel_i2c_create(struct drm_device *dev, const u32 reg,
+ const char *name);
+void intel_i2c_destroy(struct i2c_adapter *adapter);
int intel_ddc_get_modes(struct intel_output *intel_output);
extern bool intel_ddc_probe(struct intel_output *intel_output);
void intel_i2c_quirk_set(struct drm_device *dev, bool enable);
@@ -116,6 +117,10 @@
extern void intel_dvo_init(struct drm_device *dev);
extern void intel_tv_init(struct drm_device *dev);
extern void intel_lvds_init(struct drm_device *dev);
+extern void intel_dp_init(struct drm_device *dev, int dp_reg);
+void
+intel_dp_set_m_n(struct drm_crtc *crtc, struct drm_display_mode *mode,
+ struct drm_display_mode *adjusted_mode);
extern void intel_crtc_load_lut(struct drm_crtc *crtc);
extern void intel_encoder_prepare (struct drm_encoder *encoder);
diff --git a/drivers/gpu/drm/i915/intel_dvo.c b/drivers/gpu/drm/i915/intel_dvo.c
index 1ee3007..13bff209 100644
--- a/drivers/gpu/drm/i915/intel_dvo.c
+++ b/drivers/gpu/drm/i915/intel_dvo.c
@@ -384,10 +384,9 @@
{
struct intel_output *intel_output;
struct intel_dvo_device *dvo;
- struct intel_i2c_chan *i2cbus = NULL;
+ struct i2c_adapter *i2cbus = NULL;
int ret = 0;
int i;
- int gpio_inited = 0;
int encoder_type = DRM_MODE_ENCODER_NONE;
intel_output = kzalloc (sizeof(struct intel_output), GFP_KERNEL);
if (!intel_output)
@@ -420,14 +419,11 @@
* It appears that everything is on GPIOE except for panels
* on i830 laptops, which are on GPIOB (DVOA).
*/
- if (gpio_inited != gpio) {
- if (i2cbus != NULL)
- intel_i2c_destroy(i2cbus);
- if (!(i2cbus = intel_i2c_create(dev, gpio,
- gpio == GPIOB ? "DVOI2C_B" : "DVOI2C_E"))) {
- continue;
- }
- gpio_inited = gpio;
+ if (i2cbus != NULL)
+ intel_i2c_destroy(i2cbus);
+ if (!(i2cbus = intel_i2c_create(dev, gpio,
+ gpio == GPIOB ? "DVOI2C_B" : "DVOI2C_E"))) {
+ continue;
}
if (dvo->dev_ops!= NULL)
diff --git a/drivers/gpu/drm/i915/intel_fb.c b/drivers/gpu/drm/i915/intel_fb.c
index 1af7d68..1d30802 100644
--- a/drivers/gpu/drm/i915/intel_fb.c
+++ b/drivers/gpu/drm/i915/intel_fb.c
@@ -453,7 +453,7 @@
size = ALIGN(size, PAGE_SIZE);
fbo = drm_gem_object_alloc(dev, size);
if (!fbo) {
- printk(KERN_ERR "failed to allocate framebuffer\n");
+ DRM_ERROR("failed to allocate framebuffer\n");
ret = -ENOMEM;
goto out;
}
@@ -610,8 +610,8 @@
par->dev = dev;
/* To allow resizeing without swapping buffers */
- printk("allocated %dx%d fb: 0x%08x, bo %p\n", intel_fb->base.width,
- intel_fb->base.height, obj_priv->gtt_offset, fbo);
+ DRM_DEBUG("allocated %dx%d fb: 0x%08x, bo %p\n", intel_fb->base.width,
+ intel_fb->base.height, obj_priv->gtt_offset, fbo);
mutex_unlock(&dev->struct_mutex);
return 0;
@@ -698,13 +698,13 @@
} else
intelfb_set_par(info);
- printk(KERN_INFO "fb%d: %s frame buffer device\n", info->node,
+ DRM_INFO("fb%d: %s frame buffer device\n", info->node,
info->fix.id);
/* Switch back to kernel console on panic */
kernelfb_mode = *modeset;
atomic_notifier_chain_register(&panic_notifier_list, &paniced);
- printk(KERN_INFO "registered panic notifier\n");
+ DRM_DEBUG("registered panic notifier\n");
return 0;
}
@@ -852,13 +852,13 @@
} else
intelfb_set_par(info);
- printk(KERN_INFO "fb%d: %s frame buffer device\n", info->node,
+ DRM_INFO("fb%d: %s frame buffer device\n", info->node,
info->fix.id);
/* Switch back to kernel console on panic */
kernelfb_mode = *modeset;
atomic_notifier_chain_register(&panic_notifier_list, &paniced);
- printk(KERN_INFO "registered panic notifier\n");
+ DRM_DEBUG("registered panic notifier\n");
return 0;
}
@@ -872,8 +872,8 @@
{
int ret;
if ((ret = drm_crtc_helper_set_config(&kernelfb_mode)) != 0) {
- printk(KERN_ERR "Failed to restore crtc configuration: %d\n",
- ret);
+ DRM_ERROR("Failed to restore crtc configuration: %d\n",
+ ret);
}
}
diff --git a/drivers/gpu/drm/i915/intel_hdmi.c b/drivers/gpu/drm/i915/intel_hdmi.c
index 4ea2a65..9e30daa 100644
--- a/drivers/gpu/drm/i915/intel_hdmi.c
+++ b/drivers/gpu/drm/i915/intel_hdmi.c
@@ -31,6 +31,7 @@
#include "drmP.h"
#include "drm.h"
#include "drm_crtc.h"
+#include "drm_edid.h"
#include "intel_drv.h"
#include "i915_drm.h"
#include "i915_drv.h"
@@ -56,8 +57,7 @@
sdvox = SDVO_ENCODING_HDMI |
SDVO_BORDER_ENABLE |
SDVO_VSYNC_ACTIVE_HIGH |
- SDVO_HSYNC_ACTIVE_HIGH |
- SDVO_NULL_PACKETS_DURING_VSYNC;
+ SDVO_HSYNC_ACTIVE_HIGH;
if (hdmi_priv->has_hdmi_sink)
sdvox |= SDVO_AUDIO_ENABLE;
@@ -129,20 +129,26 @@
return true;
}
-static void
-intel_hdmi_sink_detect(struct drm_connector *connector)
+static enum drm_connector_status
+intel_hdmi_edid_detect(struct drm_connector *connector)
{
struct intel_output *intel_output = to_intel_output(connector);
struct intel_hdmi_priv *hdmi_priv = intel_output->dev_priv;
struct edid *edid = NULL;
+ enum drm_connector_status status = connector_status_disconnected;
edid = drm_get_edid(&intel_output->base,
- &intel_output->ddc_bus->adapter);
- if (edid != NULL) {
- hdmi_priv->has_hdmi_sink = drm_detect_hdmi_monitor(edid);
- kfree(edid);
+ intel_output->ddc_bus);
+ hdmi_priv->has_hdmi_sink = false;
+ if (edid) {
+ if (edid->input & DRM_EDID_INPUT_DIGITAL) {
+ status = connector_status_connected;
+ hdmi_priv->has_hdmi_sink = drm_detect_hdmi_monitor(edid);
+ }
intel_output->base.display_info.raw_edid = NULL;
+ kfree(edid);
}
+ return status;
}
static enum drm_connector_status
@@ -154,11 +160,7 @@
/* FIXME hotplug detect */
hdmi_priv->has_hdmi_sink = false;
- intel_hdmi_sink_detect(connector);
- if (hdmi_priv->has_hdmi_sink)
- return connector_status_connected;
- else
- return connector_status_disconnected;
+ return intel_hdmi_edid_detect(connector);
}
static enum drm_connector_status
@@ -201,10 +203,9 @@
return connector_status_unknown;
}
- if ((I915_READ(PORT_HOTPLUG_STAT) & bit) != 0) {
- intel_hdmi_sink_detect(connector);
- return connector_status_connected;
- } else
+ if ((I915_READ(PORT_HOTPLUG_STAT) & bit) != 0)
+ return intel_hdmi_edid_detect(connector);
+ else
return connector_status_disconnected;
}
diff --git a/drivers/gpu/drm/i915/intel_i2c.c b/drivers/gpu/drm/i915/intel_i2c.c
index f7061f6..62b8bea 100644
--- a/drivers/gpu/drm/i915/intel_i2c.c
+++ b/drivers/gpu/drm/i915/intel_i2c.c
@@ -124,6 +124,7 @@
* @output: driver specific output device
* @reg: GPIO reg to use
* @name: name for this bus
+ * @slave_addr: slave address (if fixed)
*
* Creates and registers a new i2c bus with the Linux i2c layer, for use
* in output probing and control (e.g. DDC or SDVO control functions).
@@ -139,8 +140,8 @@
* %GPIOH
* see PRM for details on how these different busses are used.
*/
-struct intel_i2c_chan *intel_i2c_create(struct drm_device *dev, const u32 reg,
- const char *name)
+struct i2c_adapter *intel_i2c_create(struct drm_device *dev, const u32 reg,
+ const char *name)
{
struct intel_i2c_chan *chan;
@@ -174,7 +175,7 @@
intel_i2c_quirk_set(dev, false);
udelay(20);
- return chan;
+ return &chan->adapter;
out_free:
kfree(chan);
@@ -187,11 +188,16 @@
*
* Unregister the adapter from the i2c layer, then free the structure.
*/
-void intel_i2c_destroy(struct intel_i2c_chan *chan)
+void intel_i2c_destroy(struct i2c_adapter *adapter)
{
- if (!chan)
+ struct intel_i2c_chan *chan;
+
+ if (!adapter)
return;
+ chan = container_of(adapter,
+ struct intel_i2c_chan,
+ adapter);
i2c_del_adapter(&chan->adapter);
kfree(chan);
}
diff --git a/drivers/gpu/drm/i915/intel_lvds.c b/drivers/gpu/drm/i915/intel_lvds.c
index f073ed8..9ab38ef 100644
--- a/drivers/gpu/drm/i915/intel_lvds.c
+++ b/drivers/gpu/drm/i915/intel_lvds.c
@@ -36,9 +36,25 @@
#include "intel_drv.h"
#include "i915_drm.h"
#include "i915_drv.h"
+#include <linux/acpi.h>
#define I915_LVDS "i915_lvds"
+/*
+ * the following four scaling options are defined.
+ * #define DRM_MODE_SCALE_NON_GPU 0
+ * #define DRM_MODE_SCALE_FULLSCREEN 1
+ * #define DRM_MODE_SCALE_NO_SCALE 2
+ * #define DRM_MODE_SCALE_ASPECT 3
+ */
+
+/* Private structure for the integrated LVDS support */
+struct intel_lvds_priv {
+ int fitting_mode;
+ u32 pfit_control;
+ u32 pfit_pgm_ratios;
+};
+
/**
* Sets the backlight level.
*
@@ -213,26 +229,45 @@
struct drm_display_mode *mode,
struct drm_display_mode *adjusted_mode)
{
+ /*
+ * float point operation is not supported . So the PANEL_RATIO_FACTOR
+ * is defined, which can avoid the float point computation when
+ * calculating the panel ratio.
+ */
+#define PANEL_RATIO_FACTOR 8192
struct drm_device *dev = encoder->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_crtc *intel_crtc = to_intel_crtc(encoder->crtc);
struct drm_encoder *tmp_encoder;
+ struct intel_output *intel_output = enc_to_intel_output(encoder);
+ struct intel_lvds_priv *lvds_priv = intel_output->dev_priv;
+ u32 pfit_control = 0, pfit_pgm_ratios = 0;
+ int left_border = 0, right_border = 0, top_border = 0;
+ int bottom_border = 0;
+ bool border = 0;
+ int panel_ratio, desired_ratio, vert_scale, horiz_scale;
+ int horiz_ratio, vert_ratio;
+ u32 hsync_width, vsync_width;
+ u32 hblank_width, vblank_width;
+ u32 hsync_pos, vsync_pos;
/* Should never happen!! */
if (!IS_I965G(dev) && intel_crtc->pipe == 0) {
- printk(KERN_ERR "Can't support LVDS on pipe A\n");
+ DRM_ERROR("Can't support LVDS on pipe A\n");
return false;
}
/* Should never happen!! */
list_for_each_entry(tmp_encoder, &dev->mode_config.encoder_list, head) {
if (tmp_encoder != encoder && tmp_encoder->crtc == encoder->crtc) {
- printk(KERN_ERR "Can't enable LVDS and another "
+ DRM_ERROR("Can't enable LVDS and another "
"encoder on the same pipe\n");
return false;
}
}
-
+ /* If we don't have a panel mode, there is nothing we can do */
+ if (dev_priv->panel_fixed_mode == NULL)
+ return true;
/*
* If we have timings from the BIOS for the panel, put them in
* to the adjusted mode. The CRTC will be set up for this mode,
@@ -256,6 +291,243 @@
drm_mode_set_crtcinfo(adjusted_mode, CRTC_INTERLACE_HALVE_V);
}
+ /* Make sure pre-965s set dither correctly */
+ if (!IS_I965G(dev)) {
+ if (dev_priv->panel_wants_dither || dev_priv->lvds_dither)
+ pfit_control |= PANEL_8TO6_DITHER_ENABLE;
+ }
+
+ /* Native modes don't need fitting */
+ if (adjusted_mode->hdisplay == mode->hdisplay &&
+ adjusted_mode->vdisplay == mode->vdisplay) {
+ pfit_pgm_ratios = 0;
+ border = 0;
+ goto out;
+ }
+
+ /* 965+ wants fuzzy fitting */
+ if (IS_I965G(dev))
+ pfit_control |= (intel_crtc->pipe << PFIT_PIPE_SHIFT) |
+ PFIT_FILTER_FUZZY;
+
+ hsync_width = adjusted_mode->crtc_hsync_end -
+ adjusted_mode->crtc_hsync_start;
+ vsync_width = adjusted_mode->crtc_vsync_end -
+ adjusted_mode->crtc_vsync_start;
+ hblank_width = adjusted_mode->crtc_hblank_end -
+ adjusted_mode->crtc_hblank_start;
+ vblank_width = adjusted_mode->crtc_vblank_end -
+ adjusted_mode->crtc_vblank_start;
+ /*
+ * Deal with panel fitting options. Figure out how to stretch the
+ * image based on its aspect ratio & the current panel fitting mode.
+ */
+ panel_ratio = adjusted_mode->hdisplay * PANEL_RATIO_FACTOR /
+ adjusted_mode->vdisplay;
+ desired_ratio = mode->hdisplay * PANEL_RATIO_FACTOR /
+ mode->vdisplay;
+ /*
+ * Enable automatic panel scaling for non-native modes so that they fill
+ * the screen. Should be enabled before the pipe is enabled, according
+ * to register description and PRM.
+ * Change the value here to see the borders for debugging
+ */
+ I915_WRITE(BCLRPAT_A, 0);
+ I915_WRITE(BCLRPAT_B, 0);
+
+ switch (lvds_priv->fitting_mode) {
+ case DRM_MODE_SCALE_NO_SCALE:
+ /*
+ * For centered modes, we have to calculate border widths &
+ * heights and modify the values programmed into the CRTC.
+ */
+ left_border = (adjusted_mode->hdisplay - mode->hdisplay) / 2;
+ right_border = left_border;
+ if (mode->hdisplay & 1)
+ right_border++;
+ top_border = (adjusted_mode->vdisplay - mode->vdisplay) / 2;
+ bottom_border = top_border;
+ if (mode->vdisplay & 1)
+ bottom_border++;
+ /* Set active & border values */
+ adjusted_mode->crtc_hdisplay = mode->hdisplay;
+ /* Keep the boder be even */
+ if (right_border & 1)
+ right_border++;
+ /* use the border directly instead of border minuse one */
+ adjusted_mode->crtc_hblank_start = mode->hdisplay +
+ right_border;
+ /* keep the blank width constant */
+ adjusted_mode->crtc_hblank_end =
+ adjusted_mode->crtc_hblank_start + hblank_width;
+ /* get the hsync pos relative to hblank start */
+ hsync_pos = (hblank_width - hsync_width) / 2;
+ /* keep the hsync pos be even */
+ if (hsync_pos & 1)
+ hsync_pos++;
+ adjusted_mode->crtc_hsync_start =
+ adjusted_mode->crtc_hblank_start + hsync_pos;
+ /* keep the hsync width constant */
+ adjusted_mode->crtc_hsync_end =
+ adjusted_mode->crtc_hsync_start + hsync_width;
+ adjusted_mode->crtc_vdisplay = mode->vdisplay;
+ /* use the border instead of border minus one */
+ adjusted_mode->crtc_vblank_start = mode->vdisplay +
+ bottom_border;
+ /* keep the vblank width constant */
+ adjusted_mode->crtc_vblank_end =
+ adjusted_mode->crtc_vblank_start + vblank_width;
+ /* get the vsync start postion relative to vblank start */
+ vsync_pos = (vblank_width - vsync_width) / 2;
+ adjusted_mode->crtc_vsync_start =
+ adjusted_mode->crtc_vblank_start + vsync_pos;
+ /* keep the vsync width constant */
+ adjusted_mode->crtc_vsync_end =
+ adjusted_mode->crtc_vblank_start + vsync_width;
+ border = 1;
+ break;
+ case DRM_MODE_SCALE_ASPECT:
+ /* Scale but preserve the spect ratio */
+ pfit_control |= PFIT_ENABLE;
+ if (IS_I965G(dev)) {
+ /* 965+ is easy, it does everything in hw */
+ if (panel_ratio > desired_ratio)
+ pfit_control |= PFIT_SCALING_PILLAR;
+ else if (panel_ratio < desired_ratio)
+ pfit_control |= PFIT_SCALING_LETTER;
+ else
+ pfit_control |= PFIT_SCALING_AUTO;
+ } else {
+ /*
+ * For earlier chips we have to calculate the scaling
+ * ratio by hand and program it into the
+ * PFIT_PGM_RATIO register
+ */
+ u32 horiz_bits, vert_bits, bits = 12;
+ horiz_ratio = mode->hdisplay * PANEL_RATIO_FACTOR/
+ adjusted_mode->hdisplay;
+ vert_ratio = mode->vdisplay * PANEL_RATIO_FACTOR/
+ adjusted_mode->vdisplay;
+ horiz_scale = adjusted_mode->hdisplay *
+ PANEL_RATIO_FACTOR / mode->hdisplay;
+ vert_scale = adjusted_mode->vdisplay *
+ PANEL_RATIO_FACTOR / mode->vdisplay;
+
+ /* retain aspect ratio */
+ if (panel_ratio > desired_ratio) { /* Pillar */
+ u32 scaled_width;
+ scaled_width = mode->hdisplay * vert_scale /
+ PANEL_RATIO_FACTOR;
+ horiz_ratio = vert_ratio;
+ pfit_control |= (VERT_AUTO_SCALE |
+ VERT_INTERP_BILINEAR |
+ HORIZ_INTERP_BILINEAR);
+ /* Pillar will have left/right borders */
+ left_border = (adjusted_mode->hdisplay -
+ scaled_width) / 2;
+ right_border = left_border;
+ if (mode->hdisplay & 1) /* odd resolutions */
+ right_border++;
+ /* keep the border be even */
+ if (right_border & 1)
+ right_border++;
+ adjusted_mode->crtc_hdisplay = scaled_width;
+ /* use border instead of border minus one */
+ adjusted_mode->crtc_hblank_start =
+ scaled_width + right_border;
+ /* keep the hblank width constant */
+ adjusted_mode->crtc_hblank_end =
+ adjusted_mode->crtc_hblank_start +
+ hblank_width;
+ /*
+ * get the hsync start pos relative to
+ * hblank start
+ */
+ hsync_pos = (hblank_width - hsync_width) / 2;
+ /* keep the hsync_pos be even */
+ if (hsync_pos & 1)
+ hsync_pos++;
+ adjusted_mode->crtc_hsync_start =
+ adjusted_mode->crtc_hblank_start +
+ hsync_pos;
+ /* keept hsync width constant */
+ adjusted_mode->crtc_hsync_end =
+ adjusted_mode->crtc_hsync_start +
+ hsync_width;
+ border = 1;
+ } else if (panel_ratio < desired_ratio) { /* letter */
+ u32 scaled_height = mode->vdisplay *
+ horiz_scale / PANEL_RATIO_FACTOR;
+ vert_ratio = horiz_ratio;
+ pfit_control |= (HORIZ_AUTO_SCALE |
+ VERT_INTERP_BILINEAR |
+ HORIZ_INTERP_BILINEAR);
+ /* Letterbox will have top/bottom border */
+ top_border = (adjusted_mode->vdisplay -
+ scaled_height) / 2;
+ bottom_border = top_border;
+ if (mode->vdisplay & 1)
+ bottom_border++;
+ adjusted_mode->crtc_vdisplay = scaled_height;
+ /* use border instead of border minus one */
+ adjusted_mode->crtc_vblank_start =
+ scaled_height + bottom_border;
+ /* keep the vblank width constant */
+ adjusted_mode->crtc_vblank_end =
+ adjusted_mode->crtc_vblank_start +
+ vblank_width;
+ /*
+ * get the vsync start pos relative to
+ * vblank start
+ */
+ vsync_pos = (vblank_width - vsync_width) / 2;
+ adjusted_mode->crtc_vsync_start =
+ adjusted_mode->crtc_vblank_start +
+ vsync_pos;
+ /* keep the vsync width constant */
+ adjusted_mode->crtc_vsync_end =
+ adjusted_mode->crtc_vsync_start +
+ vsync_width;
+ border = 1;
+ } else {
+ /* Aspects match, Let hw scale both directions */
+ pfit_control |= (VERT_AUTO_SCALE |
+ HORIZ_AUTO_SCALE |
+ VERT_INTERP_BILINEAR |
+ HORIZ_INTERP_BILINEAR);
+ }
+ horiz_bits = (1 << bits) * horiz_ratio /
+ PANEL_RATIO_FACTOR;
+ vert_bits = (1 << bits) * vert_ratio /
+ PANEL_RATIO_FACTOR;
+ pfit_pgm_ratios =
+ ((vert_bits << PFIT_VERT_SCALE_SHIFT) &
+ PFIT_VERT_SCALE_MASK) |
+ ((horiz_bits << PFIT_HORIZ_SCALE_SHIFT) &
+ PFIT_HORIZ_SCALE_MASK);
+ }
+ break;
+
+ case DRM_MODE_SCALE_FULLSCREEN:
+ /*
+ * Full scaling, even if it changes the aspect ratio.
+ * Fortunately this is all done for us in hw.
+ */
+ pfit_control |= PFIT_ENABLE;
+ if (IS_I965G(dev))
+ pfit_control |= PFIT_SCALING_AUTO;
+ else
+ pfit_control |= (VERT_AUTO_SCALE | HORIZ_AUTO_SCALE |
+ VERT_INTERP_BILINEAR |
+ HORIZ_INTERP_BILINEAR);
+ break;
+ default:
+ break;
+ }
+
+out:
+ lvds_priv->pfit_control = pfit_control;
+ lvds_priv->pfit_pgm_ratios = pfit_pgm_ratios;
/*
* XXX: It would be nice to support lower refresh rates on the
* panels to reduce power consumption, and perhaps match the
@@ -301,8 +573,8 @@
{
struct drm_device *dev = encoder->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
- struct intel_crtc *intel_crtc = to_intel_crtc(encoder->crtc);
- u32 pfit_control;
+ struct intel_output *intel_output = enc_to_intel_output(encoder);
+ struct intel_lvds_priv *lvds_priv = intel_output->dev_priv;
/*
* The LVDS pin pair will already have been turned on in the
@@ -319,22 +591,8 @@
* screen. Should be enabled before the pipe is enabled, according to
* register description and PRM.
*/
- if (mode->hdisplay != adjusted_mode->hdisplay ||
- mode->vdisplay != adjusted_mode->vdisplay)
- pfit_control = (PFIT_ENABLE | VERT_AUTO_SCALE |
- HORIZ_AUTO_SCALE | VERT_INTERP_BILINEAR |
- HORIZ_INTERP_BILINEAR);
- else
- pfit_control = 0;
-
- if (!IS_I965G(dev)) {
- if (dev_priv->panel_wants_dither || dev_priv->lvds_dither)
- pfit_control |= PANEL_8TO6_DITHER_ENABLE;
- }
- else
- pfit_control |= intel_crtc->pipe << PFIT_PIPE_SHIFT;
-
- I915_WRITE(PFIT_CONTROL, pfit_control);
+ I915_WRITE(PFIT_PGM_RATIOS, lvds_priv->pfit_pgm_ratios);
+ I915_WRITE(PFIT_CONTROL, lvds_priv->pfit_control);
}
/**
@@ -406,6 +664,34 @@
struct drm_property *property,
uint64_t value)
{
+ struct drm_device *dev = connector->dev;
+ struct intel_output *intel_output =
+ to_intel_output(connector);
+
+ if (property == dev->mode_config.scaling_mode_property &&
+ connector->encoder) {
+ struct drm_crtc *crtc = connector->encoder->crtc;
+ struct intel_lvds_priv *lvds_priv = intel_output->dev_priv;
+ if (value == DRM_MODE_SCALE_NON_GPU) {
+ DRM_DEBUG_KMS(I915_LVDS,
+ "non_GPU property is unsupported\n");
+ return 0;
+ }
+ if (lvds_priv->fitting_mode == value) {
+ /* the LVDS scaling property is not changed */
+ return 0;
+ }
+ lvds_priv->fitting_mode = value;
+ if (crtc && crtc->enabled) {
+ /*
+ * If the CRTC is enabled, the display will be changed
+ * according to the new panel fitting mode.
+ */
+ drm_crtc_helper_set_mode(crtc, &crtc->mode,
+ crtc->x, crtc->y, crtc->fb);
+ }
+ }
+
return 0;
}
@@ -456,7 +742,7 @@
.callback = intel_no_lvds_dmi_callback,
.ident = "Apple Mac Mini (Core series)",
.matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "Apple Inc."),
+ DMI_MATCH(DMI_SYS_VENDOR, "Apple"),
DMI_MATCH(DMI_PRODUCT_NAME, "Macmini1,1"),
},
},
@@ -464,7 +750,7 @@
.callback = intel_no_lvds_dmi_callback,
.ident = "Apple Mac Mini (Core 2 series)",
.matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "Apple Inc."),
+ DMI_MATCH(DMI_SYS_VENDOR, "Apple"),
DMI_MATCH(DMI_PRODUCT_NAME, "Macmini2,1"),
},
},
@@ -503,6 +789,65 @@
{ } /* terminating entry */
};
+#ifdef CONFIG_ACPI
+/*
+ * check_lid_device -- check whether @handle is an ACPI LID device.
+ * @handle: ACPI device handle
+ * @level : depth in the ACPI namespace tree
+ * @context: the number of LID device when we find the device
+ * @rv: a return value to fill if desired (Not use)
+ */
+static acpi_status
+check_lid_device(acpi_handle handle, u32 level, void *context,
+ void **return_value)
+{
+ struct acpi_device *acpi_dev;
+ int *lid_present = context;
+
+ acpi_dev = NULL;
+ /* Get the acpi device for device handle */
+ if (acpi_bus_get_device(handle, &acpi_dev) || !acpi_dev) {
+ /* If there is no ACPI device for handle, return */
+ return AE_OK;
+ }
+
+ if (!strncmp(acpi_device_hid(acpi_dev), "PNP0C0D", 7))
+ *lid_present = 1;
+
+ return AE_OK;
+}
+
+/**
+ * check whether there exists the ACPI LID device by enumerating the ACPI
+ * device tree.
+ */
+static int intel_lid_present(void)
+{
+ int lid_present = 0;
+
+ if (acpi_disabled) {
+ /* If ACPI is disabled, there is no ACPI device tree to
+ * check, so assume the LID device would have been present.
+ */
+ return 1;
+ }
+
+ acpi_walk_namespace(ACPI_TYPE_DEVICE, ACPI_ROOT_OBJECT,
+ ACPI_UINT32_MAX,
+ check_lid_device, &lid_present, NULL);
+
+ return lid_present;
+}
+#else
+static int intel_lid_present(void)
+{
+ /* In the absence of ACPI built in, assume that the LID device would
+ * have been present.
+ */
+ return 1;
+}
+#endif
+
/**
* intel_lvds_init - setup LVDS connectors on this device
* @dev: drm device
@@ -518,6 +863,7 @@
struct drm_encoder *encoder;
struct drm_display_mode *scan; /* *modes, *bios_mode; */
struct drm_crtc *crtc;
+ struct intel_lvds_priv *lvds_priv;
u32 lvds;
int pipe, gpio = GPIOC;
@@ -525,13 +871,24 @@
if (dmi_check_system(intel_no_lvds))
return;
+ /* Assume that any device without an ACPI LID device also doesn't
+ * have an integrated LVDS. We would be better off parsing the BIOS
+ * to get a reliable indicator, but that code isn't written yet.
+ *
+ * In the case of all-in-one desktops using LVDS that we've seen,
+ * they're using SDVO LVDS.
+ */
+ if (!intel_lid_present())
+ return;
+
if (IS_IGDNG(dev)) {
if ((I915_READ(PCH_LVDS) & LVDS_DETECTED) == 0)
return;
gpio = PCH_GPIOC;
}
- intel_output = kzalloc(sizeof(struct intel_output), GFP_KERNEL);
+ intel_output = kzalloc(sizeof(struct intel_output) +
+ sizeof(struct intel_lvds_priv), GFP_KERNEL);
if (!intel_output) {
return;
}
@@ -553,7 +910,18 @@
connector->interlace_allowed = false;
connector->doublescan_allowed = false;
+ lvds_priv = (struct intel_lvds_priv *)(intel_output + 1);
+ intel_output->dev_priv = lvds_priv;
+ /* create the scaling mode property */
+ drm_mode_create_scaling_mode_property(dev);
+ /*
+ * the initial panel fitting mode will be FULL_SCREEN.
+ */
+ drm_connector_attach_property(&intel_output->base,
+ dev->mode_config.scaling_mode_property,
+ DRM_MODE_SCALE_FULLSCREEN);
+ lvds_priv->fitting_mode = DRM_MODE_SCALE_FULLSCREEN;
/*
* LVDS discovery:
* 1) check for EDID on DDC
@@ -649,5 +1017,5 @@
if (intel_output->ddc_bus)
intel_i2c_destroy(intel_output->ddc_bus);
drm_connector_cleanup(connector);
- kfree(connector);
+ kfree(intel_output);
}
diff --git a/drivers/gpu/drm/i915/intel_modes.c b/drivers/gpu/drm/i915/intel_modes.c
index e0910fe..67e2f46 100644
--- a/drivers/gpu/drm/i915/intel_modes.c
+++ b/drivers/gpu/drm/i915/intel_modes.c
@@ -53,10 +53,9 @@
}
};
- intel_i2c_quirk_set(intel_output->ddc_bus->drm_dev, true);
- ret = i2c_transfer(&intel_output->ddc_bus->adapter, msgs, 2);
- intel_i2c_quirk_set(intel_output->ddc_bus->drm_dev, false);
-
+ intel_i2c_quirk_set(intel_output->base.dev, true);
+ ret = i2c_transfer(intel_output->ddc_bus, msgs, 2);
+ intel_i2c_quirk_set(intel_output->base.dev, false);
if (ret == 2)
return true;
@@ -74,10 +73,9 @@
struct edid *edid;
int ret = 0;
- intel_i2c_quirk_set(intel_output->ddc_bus->drm_dev, true);
- edid = drm_get_edid(&intel_output->base,
- &intel_output->ddc_bus->adapter);
- intel_i2c_quirk_set(intel_output->ddc_bus->drm_dev, false);
+ intel_i2c_quirk_set(intel_output->base.dev, true);
+ edid = drm_get_edid(&intel_output->base, intel_output->ddc_bus);
+ intel_i2c_quirk_set(intel_output->base.dev, false);
if (edid) {
drm_mode_connector_update_edid_property(&intel_output->base,
edid);
diff --git a/drivers/gpu/drm/i915/intel_sdvo.c b/drivers/gpu/drm/i915/intel_sdvo.c
index 9a00adb..4f0c309 100644
--- a/drivers/gpu/drm/i915/intel_sdvo.c
+++ b/drivers/gpu/drm/i915/intel_sdvo.c
@@ -38,8 +38,7 @@
#undef SDVO_DEBUG
#define I915_SDVO "i915_sdvo"
struct intel_sdvo_priv {
- struct intel_i2c_chan *i2c_bus;
- int slaveaddr;
+ u8 slave_addr;
/* Register for the SDVO device: SDVOB or SDVOC */
int output_device;
@@ -69,12 +68,23 @@
* This is set if we treat the device as HDMI, instead of DVI.
*/
bool is_hdmi;
+
/**
* This is set if we detect output of sdvo device as LVDS.
*/
bool is_lvds;
/**
+ * This is sdvo flags for input timing.
+ */
+ uint8_t sdvo_flags;
+
+ /**
+ * This is sdvo fixed pannel mode pointer
+ */
+ struct drm_display_mode *sdvo_lvds_fixed_mode;
+
+ /**
* Returned SDTV resolutions allowed for the current format, if the
* device reported it.
*/
@@ -146,13 +156,13 @@
struct i2c_msg msgs[] = {
{
- .addr = sdvo_priv->i2c_bus->slave_addr,
+ .addr = sdvo_priv->slave_addr >> 1,
.flags = 0,
.len = 1,
.buf = out_buf,
},
{
- .addr = sdvo_priv->i2c_bus->slave_addr,
+ .addr = sdvo_priv->slave_addr >> 1,
.flags = I2C_M_RD,
.len = 1,
.buf = buf,
@@ -162,7 +172,7 @@
out_buf[0] = addr;
out_buf[1] = 0;
- if ((ret = i2c_transfer(&sdvo_priv->i2c_bus->adapter, msgs, 2)) == 2)
+ if ((ret = i2c_transfer(intel_output->i2c_bus, msgs, 2)) == 2)
{
*ch = buf[0];
return true;
@@ -175,10 +185,11 @@
static bool intel_sdvo_write_byte(struct intel_output *intel_output, int addr,
u8 ch)
{
+ struct intel_sdvo_priv *sdvo_priv = intel_output->dev_priv;
u8 out_buf[2];
struct i2c_msg msgs[] = {
{
- .addr = intel_output->i2c_bus->slave_addr,
+ .addr = sdvo_priv->slave_addr >> 1,
.flags = 0,
.len = 2,
.buf = out_buf,
@@ -188,7 +199,7 @@
out_buf[0] = addr;
out_buf[1] = ch;
- if (i2c_transfer(&intel_output->i2c_bus->adapter, msgs, 1) == 1)
+ if (i2c_transfer(intel_output->i2c_bus, msgs, 1) == 1)
{
return true;
}
@@ -592,6 +603,7 @@
uint16_t height)
{
struct intel_sdvo_preferred_input_timing_args args;
+ struct intel_sdvo_priv *sdvo_priv = output->dev_priv;
uint8_t status;
memset(&args, 0, sizeof(args));
@@ -599,7 +611,12 @@
args.width = width;
args.height = height;
args.interlace = 0;
- args.scaled = 0;
+
+ if (sdvo_priv->is_lvds &&
+ (sdvo_priv->sdvo_lvds_fixed_mode->hdisplay != width ||
+ sdvo_priv->sdvo_lvds_fixed_mode->vdisplay != height))
+ args.scaled = 1;
+
intel_sdvo_write_cmd(output, SDVO_CMD_CREATE_PREFERRED_INPUT_TIMING,
&args, sizeof(args));
status = intel_sdvo_read_response(output, NULL, 0);
@@ -944,12 +961,7 @@
struct intel_output *output = enc_to_intel_output(encoder);
struct intel_sdvo_priv *dev_priv = output->dev_priv;
- if (!dev_priv->is_tv) {
- /* Make the CRTC code factor in the SDVO pixel multiplier. The
- * SDVO device will be told of the multiplier during mode_set.
- */
- adjusted_mode->clock *= intel_sdvo_get_pixel_multiplier(mode);
- } else {
+ if (dev_priv->is_tv) {
struct intel_sdvo_dtd output_dtd;
bool success;
@@ -980,6 +992,7 @@
intel_sdvo_get_preferred_input_timing(output,
&input_dtd);
intel_sdvo_get_mode_from_dtd(adjusted_mode, &input_dtd);
+ dev_priv->sdvo_flags = input_dtd.part2.sdvo_flags;
drm_mode_set_crtcinfo(adjusted_mode, 0);
@@ -990,6 +1003,52 @@
} else {
return false;
}
+ } else if (dev_priv->is_lvds) {
+ struct intel_sdvo_dtd output_dtd;
+ bool success;
+
+ drm_mode_set_crtcinfo(dev_priv->sdvo_lvds_fixed_mode, 0);
+ /* Set output timings */
+ intel_sdvo_get_dtd_from_mode(&output_dtd,
+ dev_priv->sdvo_lvds_fixed_mode);
+
+ intel_sdvo_set_target_output(output,
+ dev_priv->controlled_output);
+ intel_sdvo_set_output_timing(output, &output_dtd);
+
+ /* Set the input timing to the screen. Assume always input 0. */
+ intel_sdvo_set_target_input(output, true, false);
+
+
+ success = intel_sdvo_create_preferred_input_timing(
+ output,
+ mode->clock / 10,
+ mode->hdisplay,
+ mode->vdisplay);
+
+ if (success) {
+ struct intel_sdvo_dtd input_dtd;
+
+ intel_sdvo_get_preferred_input_timing(output,
+ &input_dtd);
+ intel_sdvo_get_mode_from_dtd(adjusted_mode, &input_dtd);
+ dev_priv->sdvo_flags = input_dtd.part2.sdvo_flags;
+
+ drm_mode_set_crtcinfo(adjusted_mode, 0);
+
+ mode->clock = adjusted_mode->clock;
+
+ adjusted_mode->clock *=
+ intel_sdvo_get_pixel_multiplier(mode);
+ } else {
+ return false;
+ }
+
+ } else {
+ /* Make the CRTC code factor in the SDVO pixel multiplier. The
+ * SDVO device will be told of the multiplier during mode_set.
+ */
+ adjusted_mode->clock *= intel_sdvo_get_pixel_multiplier(mode);
}
return true;
}
@@ -1033,15 +1092,16 @@
/* We have tried to get input timing in mode_fixup, and filled into
adjusted_mode */
- if (sdvo_priv->is_tv)
+ if (sdvo_priv->is_tv || sdvo_priv->is_lvds) {
intel_sdvo_get_dtd_from_mode(&input_dtd, adjusted_mode);
- else
+ input_dtd.part2.sdvo_flags = sdvo_priv->sdvo_flags;
+ } else
intel_sdvo_get_dtd_from_mode(&input_dtd, mode);
/* If it's a TV, we already set the output timing in mode_fixup.
* Otherwise, the output timing is equal to the input timing.
*/
- if (!sdvo_priv->is_tv) {
+ if (!sdvo_priv->is_tv && !sdvo_priv->is_lvds) {
/* Set the output timing to the screen */
intel_sdvo_set_target_output(output,
sdvo_priv->controlled_output);
@@ -1116,6 +1176,8 @@
sdvox |= (sdvo_pixel_multiply - 1) << SDVO_PORT_MULTIPLY_SHIFT;
}
+ if (sdvo_priv->sdvo_flags & SDVO_NEED_TO_STALL)
+ sdvox |= SDVO_STALL_SELECT;
intel_sdvo_write_sdvox(output, sdvox);
}
@@ -1276,6 +1338,17 @@
if (sdvo_priv->pixel_clock_max < mode->clock)
return MODE_CLOCK_HIGH;
+ if (sdvo_priv->is_lvds == true) {
+ if (sdvo_priv->sdvo_lvds_fixed_mode == NULL)
+ return MODE_PANEL;
+
+ if (mode->hdisplay > sdvo_priv->sdvo_lvds_fixed_mode->hdisplay)
+ return MODE_PANEL;
+
+ if (mode->vdisplay > sdvo_priv->sdvo_lvds_fixed_mode->vdisplay)
+ return MODE_PANEL;
+ }
+
return MODE_OK;
}
@@ -1369,9 +1442,8 @@
struct intel_sdvo_priv *sdvo_priv = intel_output->dev_priv;
struct edid *edid = NULL;
- intel_sdvo_set_control_bus_switch(intel_output, sdvo_priv->ddc_bus);
edid = drm_get_edid(&intel_output->base,
- &intel_output->ddc_bus->adapter);
+ intel_output->ddc_bus);
if (edid != NULL) {
sdvo_priv->is_hdmi = drm_detect_hdmi_monitor(edid);
kfree(edid);
@@ -1549,23 +1621,21 @@
static void intel_sdvo_get_lvds_modes(struct drm_connector *connector)
{
struct intel_output *intel_output = to_intel_output(connector);
- struct intel_sdvo_priv *sdvo_priv = intel_output->dev_priv;
struct drm_i915_private *dev_priv = connector->dev->dev_private;
+ struct intel_sdvo_priv *sdvo_priv = intel_output->dev_priv;
+ struct drm_display_mode *newmode;
/*
* Attempt to get the mode list from DDC.
* Assume that the preferred modes are
* arranged in priority order.
*/
- /* set the bus switch and get the modes */
- intel_sdvo_set_control_bus_switch(intel_output, sdvo_priv->ddc_bus);
intel_ddc_get_modes(intel_output);
if (list_empty(&connector->probed_modes) == false)
- return;
+ goto end;
/* Fetch modes from VBT */
if (dev_priv->sdvo_lvds_vbt_mode != NULL) {
- struct drm_display_mode *newmode;
newmode = drm_mode_duplicate(connector->dev,
dev_priv->sdvo_lvds_vbt_mode);
if (newmode != NULL) {
@@ -1575,6 +1645,16 @@
drm_mode_probed_add(connector, newmode);
}
}
+
+end:
+ list_for_each_entry(newmode, &connector->probed_modes, head) {
+ if (newmode->type & DRM_MODE_TYPE_PREFERRED) {
+ sdvo_priv->sdvo_lvds_fixed_mode =
+ drm_mode_duplicate(connector->dev, newmode);
+ break;
+ }
+ }
+
}
static int intel_sdvo_get_modes(struct drm_connector *connector)
@@ -1597,14 +1677,20 @@
static void intel_sdvo_destroy(struct drm_connector *connector)
{
struct intel_output *intel_output = to_intel_output(connector);
+ struct intel_sdvo_priv *sdvo_priv = intel_output->dev_priv;
if (intel_output->i2c_bus)
intel_i2c_destroy(intel_output->i2c_bus);
if (intel_output->ddc_bus)
intel_i2c_destroy(intel_output->ddc_bus);
+ if (sdvo_priv->sdvo_lvds_fixed_mode != NULL)
+ drm_mode_destroy(connector->dev,
+ sdvo_priv->sdvo_lvds_fixed_mode);
+
drm_sysfs_connector_remove(connector);
drm_connector_cleanup(connector);
+
kfree(intel_output);
}
@@ -1709,7 +1795,7 @@
list_for_each_entry(connector,
&dev->mode_config.connector_list, head) {
- if (to_intel_output(connector)->ddc_bus == chan) {
+ if (to_intel_output(connector)->ddc_bus == &chan->adapter) {
intel_output = to_intel_output(connector);
break;
}
@@ -1723,7 +1809,7 @@
struct intel_output *intel_output;
struct intel_sdvo_priv *sdvo_priv;
struct i2c_algo_bit_data *algo_data;
- struct i2c_algorithm *algo;
+ const struct i2c_algorithm *algo;
algo_data = (struct i2c_algo_bit_data *)i2c_adap->algo_data;
intel_output =
@@ -1733,7 +1819,7 @@
return -EINVAL;
sdvo_priv = intel_output->dev_priv;
- algo = (struct i2c_algorithm *)intel_output->i2c_bus->adapter.algo;
+ algo = intel_output->i2c_bus->algo;
intel_sdvo_set_control_bus_switch(intel_output, sdvo_priv->ddc_bus);
return algo->master_xfer(i2c_adap, msgs, num);
@@ -1785,13 +1871,11 @@
struct drm_connector *connector;
struct intel_output *intel_output;
struct intel_sdvo_priv *sdvo_priv;
- struct intel_i2c_chan *i2cbus = NULL;
- struct intel_i2c_chan *ddcbus = NULL;
+
int connector_type;
u8 ch[0x40];
int i;
- int encoder_type, output_id;
- u8 slave_addr;
+ int encoder_type;
intel_output = kcalloc(sizeof(struct intel_output)+sizeof(struct intel_sdvo_priv), 1, GFP_KERNEL);
if (!intel_output) {
@@ -1799,29 +1883,24 @@
}
sdvo_priv = (struct intel_sdvo_priv *)(intel_output + 1);
+ sdvo_priv->output_device = output_device;
+
+ intel_output->dev_priv = sdvo_priv;
intel_output->type = INTEL_OUTPUT_SDVO;
/* setup the DDC bus. */
if (output_device == SDVOB)
- i2cbus = intel_i2c_create(dev, GPIOE, "SDVOCTRL_E for SDVOB");
+ intel_output->i2c_bus = intel_i2c_create(dev, GPIOE, "SDVOCTRL_E for SDVOB");
else
- i2cbus = intel_i2c_create(dev, GPIOE, "SDVOCTRL_E for SDVOC");
+ intel_output->i2c_bus = intel_i2c_create(dev, GPIOE, "SDVOCTRL_E for SDVOC");
- if (!i2cbus)
+ if (!intel_output->i2c_bus)
goto err_inteloutput;
- slave_addr = intel_sdvo_get_slave_addr(dev, output_device);
- sdvo_priv->i2c_bus = i2cbus;
+ sdvo_priv->slave_addr = intel_sdvo_get_slave_addr(dev, output_device);
- if (output_device == SDVOB) {
- output_id = 1;
- } else {
- output_id = 2;
- }
- sdvo_priv->i2c_bus->slave_addr = slave_addr >> 1;
- sdvo_priv->output_device = output_device;
- intel_output->i2c_bus = i2cbus;
- intel_output->dev_priv = sdvo_priv;
+ /* Save the bit-banging i2c functionality for use by the DDC wrapper */
+ intel_sdvo_i2c_bit_algo.functionality = intel_output->i2c_bus->algo->functionality;
/* Read the regs to test if we can talk to the device */
for (i = 0; i < 0x40; i++) {
@@ -1835,17 +1914,15 @@
/* setup the DDC bus. */
if (output_device == SDVOB)
- ddcbus = intel_i2c_create(dev, GPIOE, "SDVOB DDC BUS");
+ intel_output->ddc_bus = intel_i2c_create(dev, GPIOE, "SDVOB DDC BUS");
else
- ddcbus = intel_i2c_create(dev, GPIOE, "SDVOC DDC BUS");
+ intel_output->ddc_bus = intel_i2c_create(dev, GPIOE, "SDVOC DDC BUS");
- if (ddcbus == NULL)
+ if (intel_output->ddc_bus == NULL)
goto err_i2c;
- intel_sdvo_i2c_bit_algo.functionality =
- intel_output->i2c_bus->adapter.algo->functionality;
- ddcbus->adapter.algo = &intel_sdvo_i2c_bit_algo;
- intel_output->ddc_bus = ddcbus;
+ /* Wrap with our custom algo which switches to DDC mode */
+ intel_output->ddc_bus->algo = &intel_sdvo_i2c_bit_algo;
/* In defaut case sdvo lvds is false */
sdvo_priv->is_lvds = false;
@@ -1965,9 +2042,10 @@
return true;
err_i2c:
- if (ddcbus != NULL)
+ if (intel_output->ddc_bus != NULL)
intel_i2c_destroy(intel_output->ddc_bus);
- intel_i2c_destroy(intel_output->i2c_bus);
+ if (intel_output->i2c_bus != NULL)
+ intel_i2c_destroy(intel_output->i2c_bus);
err_inteloutput:
kfree(intel_output);
diff --git a/drivers/gpu/drm/i915/intel_sdvo_regs.h b/drivers/gpu/drm/i915/intel_sdvo_regs.h
index 193938b..ba5cdf8 100644
--- a/drivers/gpu/drm/i915/intel_sdvo_regs.h
+++ b/drivers/gpu/drm/i915/intel_sdvo_regs.h
@@ -715,6 +715,7 @@
#define SDVO_HBUF_TX_ONCE (2 << 6)
#define SDVO_HBUF_TX_VSYNC (3 << 6)
#define SDVO_CMD_GET_AUDIO_TX_INFO 0x9c
+#define SDVO_NEED_TO_STALL (1 << 7)
struct intel_sdvo_encode{
u8 dvi_rev;
diff --git a/drivers/gpu/drm/i915/intel_tv.c b/drivers/gpu/drm/i915/intel_tv.c
index ea68992..a43c98e 100644
--- a/drivers/gpu/drm/i915/intel_tv.c
+++ b/drivers/gpu/drm/i915/intel_tv.c
@@ -1383,34 +1383,31 @@
/*
* Detect TV by polling)
*/
- if (intel_output->load_detect_temp) {
- /* TV not currently running, prod it with destructive detect */
- save_tv_dac = tv_dac;
- tv_ctl = I915_READ(TV_CTL);
- save_tv_ctl = tv_ctl;
- tv_ctl &= ~TV_ENC_ENABLE;
- tv_ctl &= ~TV_TEST_MODE_MASK;
- tv_ctl |= TV_TEST_MODE_MONITOR_DETECT;
- tv_dac &= ~TVDAC_SENSE_MASK;
- tv_dac &= ~DAC_A_MASK;
- tv_dac &= ~DAC_B_MASK;
- tv_dac &= ~DAC_C_MASK;
- tv_dac |= (TVDAC_STATE_CHG_EN |
- TVDAC_A_SENSE_CTL |
- TVDAC_B_SENSE_CTL |
- TVDAC_C_SENSE_CTL |
- DAC_CTL_OVERRIDE |
- DAC_A_0_7_V |
- DAC_B_0_7_V |
- DAC_C_0_7_V);
- I915_WRITE(TV_CTL, tv_ctl);
- I915_WRITE(TV_DAC, tv_dac);
- intel_wait_for_vblank(dev);
- tv_dac = I915_READ(TV_DAC);
- I915_WRITE(TV_DAC, save_tv_dac);
- I915_WRITE(TV_CTL, save_tv_ctl);
- intel_wait_for_vblank(dev);
- }
+ save_tv_dac = tv_dac;
+ tv_ctl = I915_READ(TV_CTL);
+ save_tv_ctl = tv_ctl;
+ tv_ctl &= ~TV_ENC_ENABLE;
+ tv_ctl &= ~TV_TEST_MODE_MASK;
+ tv_ctl |= TV_TEST_MODE_MONITOR_DETECT;
+ tv_dac &= ~TVDAC_SENSE_MASK;
+ tv_dac &= ~DAC_A_MASK;
+ tv_dac &= ~DAC_B_MASK;
+ tv_dac &= ~DAC_C_MASK;
+ tv_dac |= (TVDAC_STATE_CHG_EN |
+ TVDAC_A_SENSE_CTL |
+ TVDAC_B_SENSE_CTL |
+ TVDAC_C_SENSE_CTL |
+ DAC_CTL_OVERRIDE |
+ DAC_A_0_7_V |
+ DAC_B_0_7_V |
+ DAC_C_0_7_V);
+ I915_WRITE(TV_CTL, tv_ctl);
+ I915_WRITE(TV_DAC, tv_dac);
+ intel_wait_for_vblank(dev);
+ tv_dac = I915_READ(TV_DAC);
+ I915_WRITE(TV_DAC, save_tv_dac);
+ I915_WRITE(TV_CTL, save_tv_ctl);
+ intel_wait_for_vblank(dev);
/*
* A B C
* 0 1 1 Composite
diff --git a/drivers/gpu/drm/radeon/radeon_device.c b/drivers/gpu/drm/radeon/radeon_device.c
index f30aa72..f97563d 100644
--- a/drivers/gpu/drm/radeon/radeon_device.c
+++ b/drivers/gpu/drm/radeon/radeon_device.c
@@ -35,6 +35,23 @@
#include "atom.h"
/*
+ * Clear GPU surface registers.
+ */
+static void radeon_surface_init(struct radeon_device *rdev)
+{
+ /* FIXME: check this out */
+ if (rdev->family < CHIP_R600) {
+ int i;
+
+ for (i = 0; i < 8; i++) {
+ WREG32(RADEON_SURFACE0_INFO +
+ i * (RADEON_SURFACE1_INFO - RADEON_SURFACE0_INFO),
+ 0);
+ }
+ }
+}
+
+/*
* GPU scratch registers helpers function.
*/
static void radeon_scratch_init(struct radeon_device *rdev)
@@ -496,6 +513,8 @@
radeon_errata(rdev);
/* Initialize scratch registers */
radeon_scratch_init(rdev);
+ /* Initialize surface registers */
+ radeon_surface_init(rdev);
/* TODO: disable VGA need to use VGA request */
/* BIOS*/
@@ -604,9 +623,6 @@
if (r) {
return r;
}
- if (rdev->fbdev_rfb && rdev->fbdev_rfb->obj) {
- rdev->fbdev_robj = rdev->fbdev_rfb->obj->driver_private;
- }
if (!ret) {
DRM_INFO("radeon: kernel modesetting successfully initialized.\n");
}
diff --git a/drivers/gpu/drm/radeon/radeon_drv.c b/drivers/gpu/drm/radeon/radeon_drv.c
index 09c9fb9..84ba69f 100644
--- a/drivers/gpu/drm/radeon/radeon_drv.c
+++ b/drivers/gpu/drm/radeon/radeon_drv.c
@@ -345,7 +345,7 @@
drm_exit(driver);
}
-late_initcall(radeon_init);
+module_init(radeon_init);
module_exit(radeon_exit);
MODULE_AUTHOR(DRIVER_AUTHOR);
diff --git a/drivers/gpu/drm/radeon/radeon_fb.c b/drivers/gpu/drm/radeon/radeon_fb.c
index fa86d39..9e8f191 100644
--- a/drivers/gpu/drm/radeon/radeon_fb.c
+++ b/drivers/gpu/drm/radeon/radeon_fb.c
@@ -478,14 +478,16 @@
{
struct fb_info *info;
struct radeon_fb_device *rfbdev;
- struct drm_framebuffer *fb;
+ struct drm_framebuffer *fb = NULL;
struct radeon_framebuffer *rfb;
struct drm_mode_fb_cmd mode_cmd;
struct drm_gem_object *gobj = NULL;
struct radeon_object *robj = NULL;
struct device *device = &rdev->pdev->dev;
int size, aligned_size, ret;
+ u64 fb_gpuaddr;
void *fbptr = NULL;
+ unsigned long tmp;
mode_cmd.width = surface_width;
mode_cmd.height = surface_height;
@@ -498,11 +500,12 @@
aligned_size = ALIGN(size, PAGE_SIZE);
ret = radeon_gem_object_create(rdev, aligned_size, 0,
- RADEON_GEM_DOMAIN_VRAM,
- false, ttm_bo_type_kernel,
- false, &gobj);
+ RADEON_GEM_DOMAIN_VRAM,
+ false, ttm_bo_type_kernel,
+ false, &gobj);
if (ret) {
- printk(KERN_ERR "failed to allocate framebuffer\n");
+ printk(KERN_ERR "failed to allocate framebuffer (%d %d)\n",
+ surface_width, surface_height);
ret = -ENOMEM;
goto out;
}
@@ -515,12 +518,19 @@
ret = -ENOMEM;
goto out_unref;
}
+ ret = radeon_object_pin(robj, RADEON_GEM_DOMAIN_VRAM, &fb_gpuaddr);
+ if (ret) {
+ printk(KERN_ERR "failed to pin framebuffer\n");
+ ret = -ENOMEM;
+ goto out_unref;
+ }
list_add(&fb->filp_head, &rdev->ddev->mode_config.fb_kernel_list);
rfb = to_radeon_framebuffer(fb);
*rfb_p = rfb;
rdev->fbdev_rfb = rfb;
+ rdev->fbdev_robj = robj;
info = framebuffer_alloc(sizeof(struct radeon_fb_device), device);
if (info == NULL) {
@@ -541,13 +551,13 @@
info->fix.xpanstep = 1; /* doing it in hw */
info->fix.ypanstep = 1; /* doing it in hw */
info->fix.ywrapstep = 0;
- info->fix.accel = FB_ACCEL_I830;
+ info->fix.accel = FB_ACCEL_NONE;
info->fix.type_aux = 0;
info->flags = FBINFO_DEFAULT;
info->fbops = &radeonfb_ops;
info->fix.line_length = fb->pitch;
- info->screen_base = fbptr;
- info->fix.smem_start = (unsigned long)fbptr;
+ tmp = fb_gpuaddr - rdev->mc.vram_location;
+ info->fix.smem_start = rdev->mc.aper_base + tmp;
info->fix.smem_len = size;
info->screen_base = fbptr;
info->screen_size = size;
@@ -562,8 +572,8 @@
info->var.width = -1;
info->var.xres = fb_width;
info->var.yres = fb_height;
- info->fix.mmio_start = pci_resource_start(rdev->pdev, 2);
- info->fix.mmio_len = pci_resource_len(rdev->pdev, 2);
+ info->fix.mmio_start = 0;
+ info->fix.mmio_len = 0;
info->pixmap.size = 64*1024;
info->pixmap.buf_align = 8;
info->pixmap.access_align = 32;
@@ -644,7 +654,7 @@
if (robj) {
radeon_object_kunmap(robj);
}
- if (ret) {
+ if (fb && ret) {
list_del(&fb->filp_head);
drm_gem_object_unreference(gobj);
drm_framebuffer_cleanup(fb);
@@ -813,6 +823,7 @@
robj = rfb->obj->driver_private;
unregister_framebuffer(info);
radeon_object_kunmap(robj);
+ radeon_object_unpin(robj);
framebuffer_release(info);
}
diff --git a/drivers/gpu/drm/radeon/radeon_object.c b/drivers/gpu/drm/radeon/radeon_object.c
index 983e8df..bac0d06 100644
--- a/drivers/gpu/drm/radeon/radeon_object.c
+++ b/drivers/gpu/drm/radeon/radeon_object.c
@@ -223,7 +223,6 @@
{
uint32_t flags;
uint32_t tmp;
- void *fbptr;
int r;
flags = radeon_object_flags_from_domain(domain);
@@ -242,10 +241,6 @@
DRM_ERROR("radeon: failed to reserve object for pinning it.\n");
return r;
}
- if (robj->rdev->fbdev_robj == robj) {
- mutex_lock(&robj->rdev->fbdev_info->lock);
- radeon_object_kunmap(robj);
- }
tmp = robj->tobj.mem.placement;
ttm_flag_masked(&tmp, flags, TTM_PL_MASK_MEM);
robj->tobj.proposed_placement = tmp | TTM_PL_FLAG_NO_EVICT | TTM_PL_MASK_CACHING;
@@ -261,23 +256,12 @@
DRM_ERROR("radeon: failed to pin object.\n");
}
radeon_object_unreserve(robj);
- if (robj->rdev->fbdev_robj == robj) {
- if (!r) {
- r = radeon_object_kmap(robj, &fbptr);
- }
- if (!r) {
- robj->rdev->fbdev_info->screen_base = fbptr;
- robj->rdev->fbdev_info->fix.smem_start = (unsigned long)fbptr;
- }
- mutex_unlock(&robj->rdev->fbdev_info->lock);
- }
return r;
}
void radeon_object_unpin(struct radeon_object *robj)
{
uint32_t flags;
- void *fbptr;
int r;
spin_lock(&robj->tobj.lock);
@@ -297,10 +281,6 @@
DRM_ERROR("radeon: failed to reserve object for unpinning it.\n");
return;
}
- if (robj->rdev->fbdev_robj == robj) {
- mutex_lock(&robj->rdev->fbdev_info->lock);
- radeon_object_kunmap(robj);
- }
flags = robj->tobj.mem.placement;
robj->tobj.proposed_placement = flags & ~TTM_PL_FLAG_NO_EVICT;
r = ttm_buffer_object_validate(&robj->tobj,
@@ -310,16 +290,6 @@
DRM_ERROR("radeon: failed to unpin buffer.\n");
}
radeon_object_unreserve(robj);
- if (robj->rdev->fbdev_robj == robj) {
- if (!r) {
- r = radeon_object_kmap(robj, &fbptr);
- }
- if (!r) {
- robj->rdev->fbdev_info->screen_base = fbptr;
- robj->rdev->fbdev_info->fix.smem_start = (unsigned long)fbptr;
- }
- mutex_unlock(&robj->rdev->fbdev_info->lock);
- }
}
int radeon_object_wait(struct radeon_object *robj)
diff --git a/drivers/gpu/drm/ttm/ttm_bo_util.c b/drivers/gpu/drm/ttm/ttm_bo_util.c
index 517c845..bdec583 100644
--- a/drivers/gpu/drm/ttm/ttm_bo_util.c
+++ b/drivers/gpu/drm/ttm/ttm_bo_util.c
@@ -34,7 +34,6 @@
#include <linux/highmem.h>
#include <linux/wait.h>
#include <linux/vmalloc.h>
-#include <linux/version.h>
#include <linux/module.h>
void ttm_bo_free_old_node(struct ttm_buffer_object *bo)
diff --git a/drivers/gpu/drm/ttm/ttm_bo_vm.c b/drivers/gpu/drm/ttm/ttm_bo_vm.c
index 27b146c..40b7503 100644
--- a/drivers/gpu/drm/ttm/ttm_bo_vm.c
+++ b/drivers/gpu/drm/ttm/ttm_bo_vm.c
@@ -32,7 +32,6 @@
#include <ttm/ttm_bo_driver.h>
#include <ttm/ttm_placement.h>
#include <linux/mm.h>
-#include <linux/version.h>
#include <linux/rbtree.h>
#include <linux/module.h>
#include <linux/uaccess.h>
diff --git a/drivers/gpu/drm/ttm/ttm_tt.c b/drivers/gpu/drm/ttm/ttm_tt.c
index 0331fa7..75dc8bd 100644
--- a/drivers/gpu/drm/ttm/ttm_tt.c
+++ b/drivers/gpu/drm/ttm/ttm_tt.c
@@ -28,7 +28,6 @@
* Authors: Thomas Hellstrom <thellstrom-at-vmware-dot-com>
*/
-#include <linux/version.h>
#include <linux/vmalloc.h>
#include <linux/sched.h>
#include <linux/highmem.h>
diff --git a/drivers/hid/usbhid/hid-core.c b/drivers/hid/usbhid/hid-core.c
index 76c4bbe..3c1fcb7 100644
--- a/drivers/hid/usbhid/hid-core.c
+++ b/drivers/hid/usbhid/hid-core.c
@@ -22,7 +22,6 @@
#include <linux/list.h>
#include <linux/mm.h>
#include <linux/mutex.h>
-#include <linux/smp_lock.h>
#include <linux/spinlock.h>
#include <asm/unaligned.h>
#include <asm/byteorder.h>
diff --git a/drivers/hwmon/abituguru3.c b/drivers/hwmon/abituguru3.c
index ad2b343..7d3f15d 100644
--- a/drivers/hwmon/abituguru3.c
+++ b/drivers/hwmon/abituguru3.c
@@ -357,7 +357,7 @@
{ "AUX5 Fan", 39, 2, 60, 1, 0 },
{ NULL, 0, 0, 0, 0, 0 } }
},
- { 0x0014, NULL /* Abit AB9 Pro, need DMI string */, {
+ { 0x0014, "AB9", /* + AB9 Pro */ {
{ "CPU Core", 0, 0, 10, 1, 0 },
{ "DDR", 1, 0, 10, 1, 0 },
{ "DDR VTT", 2, 0, 10, 1, 0 },
@@ -455,7 +455,7 @@
{ "AUX3 FAN", 37, 2, 60, 1, 0 },
{ NULL, 0, 0, 0, 0, 0 } }
},
- { 0x0018, NULL /* Unknown, need DMI string */, {
+ { 0x0018, "AB9 QuadGT", {
{ "CPU Core", 0, 0, 10, 1, 0 },
{ "DDR2", 1, 0, 20, 1, 0 },
{ "DDR2 VTT", 2, 0, 10, 1, 0 },
@@ -564,7 +564,7 @@
{ "AUX3 Fan", 36, 2, 60, 1, 0 },
{ NULL, 0, 0, 0, 0, 0 } }
},
- { 0x001C, NULL /* Unknown, need DMI string */, {
+ { 0x001C, "IX38 QuadGT", {
{ "CPU Core", 0, 0, 10, 1, 0 },
{ "DDR2", 1, 0, 20, 1, 0 },
{ "DDR2 VTT", 2, 0, 10, 1, 0 },
diff --git a/drivers/hwmon/max6650.c b/drivers/hwmon/max6650.c
index 86142a8..58f66be 100644
--- a/drivers/hwmon/max6650.c
+++ b/drivers/hwmon/max6650.c
@@ -418,6 +418,7 @@
data->count = 3;
break;
default:
+ mutex_unlock(&data->update_lock);
dev_err(&client->dev,
"illegal value for fan divider (%d)\n", div);
return -EINVAL;
diff --git a/drivers/hwmon/sht15.c b/drivers/hwmon/sht15.c
index 56cd600..6290a25 100644
--- a/drivers/hwmon/sht15.c
+++ b/drivers/hwmon/sht15.c
@@ -257,7 +257,7 @@
(data->flag == SHT15_READING_NOTHING),
msecs_to_jiffies(timeout_msecs));
if (ret == 0) {/* timeout occurred */
- disable_irq_nosync(gpio_to_irq(data->pdata->gpio_data));;
+ disable_irq_nosync(gpio_to_irq(data->pdata->gpio_data));
sht15_connection_reset(data);
return -ETIME;
}
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index aa87b6a..8206442 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -328,6 +328,7 @@
config I2C_DESIGNWARE
tristate "Synopsys DesignWare"
+ depends on HAVE_CLK
help
If you say yes to this option, support will be included for the
Synopsys DesignWare I2C adapter. Only master mode is supported.
diff --git a/drivers/i2c/busses/i2c-ibm_iic.c b/drivers/i2c/busses/i2c-ibm_iic.c
index e447674..b1bc6e2 100644
--- a/drivers/i2c/busses/i2c-ibm_iic.c
+++ b/drivers/i2c/busses/i2c-ibm_iic.c
@@ -85,10 +85,11 @@
{
volatile struct iic_regs __iomem *iic = dev->vaddr;
printk(KERN_DEBUG "ibm-iic%d: %s\n", dev->idx, header);
- printk(KERN_DEBUG " cntl = 0x%02x, mdcntl = 0x%02x\n"
- KERN_DEBUG " sts = 0x%02x, extsts = 0x%02x\n"
- KERN_DEBUG " clkdiv = 0x%02x, xfrcnt = 0x%02x\n"
- KERN_DEBUG " xtcntlss = 0x%02x, directcntl = 0x%02x\n",
+ printk(KERN_DEBUG
+ " cntl = 0x%02x, mdcntl = 0x%02x\n"
+ " sts = 0x%02x, extsts = 0x%02x\n"
+ " clkdiv = 0x%02x, xfrcnt = 0x%02x\n"
+ " xtcntlss = 0x%02x, directcntl = 0x%02x\n",
in_8(&iic->cntl), in_8(&iic->mdcntl), in_8(&iic->sts),
in_8(&iic->extsts), in_8(&iic->clkdiv), in_8(&iic->xfrcnt),
in_8(&iic->xtcntlss), in_8(&iic->directcntl));
diff --git a/drivers/ide/cs5520.c b/drivers/ide/cs5520.c
index bd066bb..09f98ed 100644
--- a/drivers/ide/cs5520.c
+++ b/drivers/ide/cs5520.c
@@ -135,6 +135,7 @@
ide_pci_setup_ports(dev, d, &hw[0], &hws[0]);
hw[0].irq = 14;
+ hw[1].irq = 15;
return ide_host_add(d, hws, 2, NULL);
}
diff --git a/drivers/ide/ide-acpi.c b/drivers/ide/ide-acpi.c
index 77f79d2..c509c99 100644
--- a/drivers/ide/ide-acpi.c
+++ b/drivers/ide/ide-acpi.c
@@ -92,6 +92,11 @@
return 0;
}
+bool ide_port_acpi(ide_hwif_t *hwif)
+{
+ return ide_noacpi == 0 && hwif->acpidata;
+}
+
/**
* ide_get_dev_handle - finds acpi_handle and PCI device.function
* @dev: device to locate
@@ -352,9 +357,6 @@
unsigned long gtf_address;
unsigned long obj_loc;
- if (ide_noacpi)
- return 0;
-
DEBPRINT("call get_GTF, drive=%s port=%d\n", drive->name, drive->dn);
ret = do_drive_get_GTF(drive, >f_length, >f_address, &obj_loc);
@@ -389,16 +391,6 @@
struct acpi_buffer output;
union acpi_object *out_obj;
- if (ide_noacpi)
- return;
-
- DEBPRINT("ENTER:\n");
-
- if (!hwif->acpidata) {
- DEBPRINT("no ACPI data for %s\n", hwif->name);
- return;
- }
-
/* Setting up output buffer for _GTM */
output.length = ACPI_ALLOCATE_BUFFER;
output.pointer = NULL; /* ACPI-CA sets this; save/free it later */
@@ -479,16 +471,6 @@
struct ide_acpi_drive_link *master = &hwif->acpidata->master;
struct ide_acpi_drive_link *slave = &hwif->acpidata->slave;
- if (ide_noacpi)
- return;
-
- DEBPRINT("ENTER:\n");
-
- if (!hwif->acpidata) {
- DEBPRINT("no ACPI data for %s\n", hwif->name);
- return;
- }
-
/* Give the GTM buffer + drive Identify data to the channel via the
* _STM method: */
/* setup input parameters buffer for _STM */
@@ -527,16 +509,11 @@
ide_drive_t *drive;
int i;
- if (ide_noacpi || ide_noacpi_psx)
+ if (ide_noacpi_psx)
return;
DEBPRINT("ENTER:\n");
- if (!hwif->acpidata) {
- DEBPRINT("no ACPI data for %s\n", hwif->name);
- return;
- }
-
/* channel first and then drives for power on and verse versa for power off */
if (on)
acpi_bus_set_power(hwif->acpidata->obj_handle, ACPI_STATE_D0);
@@ -616,7 +593,7 @@
drive->name, err);
}
- if (!ide_acpionboot) {
+ if (ide_noacpi || ide_acpionboot == 0) {
DEBPRINT("ACPI methods disabled on boot\n");
return;
}
diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c
index 4a19686..6a9a769 100644
--- a/drivers/ide/ide-cd.c
+++ b/drivers/ide/ide-cd.c
@@ -592,9 +592,19 @@
}
} else if (!blk_pc_request(rq)) {
ide_cd_request_sense_fixup(drive, cmd);
- /* complain if we still have data left to transfer */
+
uptodate = cmd->nleft ? 0 : 1;
- if (uptodate == 0)
+
+ /*
+ * suck out the remaining bytes from the drive in an
+ * attempt to complete the data xfer. (see BZ#13399)
+ */
+ if (!(stat & ATA_ERR) && !uptodate && thislen) {
+ ide_pio_bytes(drive, cmd, write, thislen);
+ uptodate = cmd->nleft ? 0 : 1;
+ }
+
+ if (!uptodate)
rq->cmd_flags |= REQ_FAILED;
}
goto out_end;
@@ -876,9 +886,12 @@
return stat;
/*
- * Sanity check the given block size
+ * Sanity check the given block size, in so far as making
+ * sure the sectors_per_frame we give to the caller won't
+ * end up being bogus.
*/
blocklen = be32_to_cpu(capbuf.blocklen);
+ blocklen = (blocklen >> SECTOR_BITS) << SECTOR_BITS;
switch (blocklen) {
case 512:
case 1024:
@@ -886,10 +899,9 @@
case 4096:
break;
default:
- printk(KERN_ERR PFX "%s: weird block size %u\n",
+ printk_once(KERN_ERR PFX "%s: weird block size %u; "
+ "setting default block size to 2048\n",
drive->name, blocklen);
- printk(KERN_ERR PFX "%s: default to 2kb block size\n",
- drive->name);
blocklen = 2048;
break;
}
diff --git a/drivers/ide/ide-devsets.c b/drivers/ide/ide-devsets.c
index 5bf958e..1099bf7 100644
--- a/drivers/ide/ide-devsets.c
+++ b/drivers/ide/ide-devsets.c
@@ -183,6 +183,6 @@
err = setfunc(drive, *(int *)&rq->cmd[1]);
if (err)
rq->errors = err;
- ide_complete_rq(drive, err, ide_rq_bytes(rq));
+ ide_complete_rq(drive, err, blk_rq_bytes(rq));
return ide_stopped;
}
diff --git a/drivers/ide/ide-dma.c b/drivers/ide/ide-dma.c
index 219e6fb..ee58c88 100644
--- a/drivers/ide/ide-dma.c
+++ b/drivers/ide/ide-dma.c
@@ -361,9 +361,6 @@
if (__ide_dma_bad_drive(drive))
return 0;
- if (ide_id_dma_bug(drive))
- return 0;
-
if (hwif->host_flags & IDE_HFLAG_TRUST_BIOS_FOR_DMA)
return config_drive_for_dma(drive);
@@ -394,24 +391,6 @@
return -1;
}
-int ide_id_dma_bug(ide_drive_t *drive)
-{
- u16 *id = drive->id;
-
- if (id[ATA_ID_FIELD_VALID] & 4) {
- if ((id[ATA_ID_UDMA_MODES] >> 8) &&
- (id[ATA_ID_MWDMA_MODES] >> 8))
- goto err_out;
- } else if ((id[ATA_ID_MWDMA_MODES] >> 8) &&
- (id[ATA_ID_SWDMA_MODES] >> 8))
- goto err_out;
-
- return 0;
-err_out:
- printk(KERN_ERR "%s: bad DMA info in identify block\n", drive->name);
- return 1;
-}
-
int ide_set_dma(ide_drive_t *drive)
{
int rc;
diff --git a/drivers/ide/ide-eh.c b/drivers/ide/ide-eh.c
index 2b91419..e9abf2c 100644
--- a/drivers/ide/ide-eh.c
+++ b/drivers/ide/ide-eh.c
@@ -149,7 +149,7 @@
if (rq && blk_special_request(rq) && rq->cmd[0] == REQ_DRIVE_RESET) {
if (err <= 0 && rq->errors == 0)
rq->errors = -EIO;
- ide_complete_rq(drive, err ? err : 0, ide_rq_bytes(rq));
+ ide_complete_rq(drive, err ? err : 0, blk_rq_bytes(rq));
}
}
diff --git a/drivers/ide/ide-floppy.c b/drivers/ide/ide-floppy.c
index 8b3f204..fefbdfc 100644
--- a/drivers/ide/ide-floppy.c
+++ b/drivers/ide/ide-floppy.c
@@ -293,7 +293,7 @@
drive->failed_pc = NULL;
if (blk_fs_request(rq) == 0 && rq->errors == 0)
rq->errors = -EIO;
- ide_complete_rq(drive, -EIO, ide_rq_bytes(rq));
+ ide_complete_rq(drive, -EIO, blk_rq_bytes(rq));
return ide_stopped;
}
diff --git a/drivers/ide/ide-io.c b/drivers/ide/ide-io.c
index 1059f80..db96138 100644
--- a/drivers/ide/ide-io.c
+++ b/drivers/ide/ide-io.c
@@ -112,16 +112,6 @@
}
}
-/* obsolete, blk_rq_bytes() should be used instead */
-unsigned int ide_rq_bytes(struct request *rq)
-{
- if (blk_pc_request(rq))
- return blk_rq_bytes(rq);
- else
- return blk_rq_cur_sectors(rq) << 9;
-}
-EXPORT_SYMBOL_GPL(ide_rq_bytes);
-
int ide_complete_rq(ide_drive_t *drive, int error, unsigned int nr_bytes)
{
ide_hwif_t *hwif = drive->hwif;
@@ -152,14 +142,14 @@
if ((media == ide_floppy || media == ide_tape) && drv_req) {
rq->errors = 0;
- ide_complete_rq(drive, 0, blk_rq_bytes(rq));
} else {
if (media == ide_tape)
rq->errors = IDE_DRV_ERROR_GENERAL;
else if (blk_fs_request(rq) == 0 && rq->errors == 0)
rq->errors = -EIO;
- ide_complete_rq(drive, -EIO, ide_rq_bytes(rq));
}
+
+ ide_complete_rq(drive, -EIO, blk_rq_bytes(rq));
}
static void ide_tf_set_specify_cmd(ide_drive_t *drive, struct ide_taskfile *tf)
diff --git a/drivers/ide/ide-ioctls.c b/drivers/ide/ide-ioctls.c
index 82f252c..e246d3d 100644
--- a/drivers/ide/ide-ioctls.c
+++ b/drivers/ide/ide-ioctls.c
@@ -64,7 +64,8 @@
goto out;
}
- id = kmalloc(size, GFP_KERNEL);
+ /* ata_id_to_hd_driveid() relies on 'id' to be fully allocated. */
+ id = kmalloc(ATA_ID_WORDS * 2, GFP_KERNEL);
if (id == NULL) {
rc = -ENOMEM;
goto out;
diff --git a/drivers/ide/ide-iops.c b/drivers/ide/ide-iops.c
index fa04715..2892b24 100644
--- a/drivers/ide/ide-iops.c
+++ b/drivers/ide/ide-iops.c
@@ -210,6 +210,7 @@
*/
static const struct drive_list_entry ivb_list[] = {
{ "QUANTUM FIREBALLlct10 05" , "A03.0900" },
+ { "QUANTUM FIREBALLlct20 30" , "APL.0900" },
{ "TSSTcorp CDDVDW SH-S202J" , "SB00" },
{ "TSSTcorp CDDVDW SH-S202J" , "SB01" },
{ "TSSTcorp CDDVDW SH-S202N" , "SB00" },
@@ -329,9 +330,6 @@
kfree(id);
- if ((drive->dev_flags & IDE_DFLAG_USING_DMA) && ide_id_dma_bug(drive))
- ide_dma_off(drive);
-
return 1;
out_err:
if (rc == 2)
diff --git a/drivers/ide/ide-pm.c b/drivers/ide/ide-pm.c
index c14ca14..ad7be266 100644
--- a/drivers/ide/ide-pm.c
+++ b/drivers/ide/ide-pm.c
@@ -10,9 +10,11 @@
struct request_pm_state rqpm;
int ret;
- /* call ACPI _GTM only once */
- if ((drive->dn & 1) == 0 || pair == NULL)
- ide_acpi_get_timing(hwif);
+ if (ide_port_acpi(hwif)) {
+ /* call ACPI _GTM only once */
+ if ((drive->dn & 1) == 0 || pair == NULL)
+ ide_acpi_get_timing(hwif);
+ }
memset(&rqpm, 0, sizeof(rqpm));
rq = blk_get_request(drive->queue, READ, __GFP_WAIT);
@@ -26,9 +28,11 @@
ret = blk_execute_rq(drive->queue, NULL, rq, 0);
blk_put_request(rq);
- /* call ACPI _PS3 only after both devices are suspended */
- if (ret == 0 && ((drive->dn & 1) || pair == NULL))
- ide_acpi_set_state(hwif, 0);
+ if (ret == 0 && ide_port_acpi(hwif)) {
+ /* call ACPI _PS3 only after both devices are suspended */
+ if ((drive->dn & 1) || pair == NULL)
+ ide_acpi_set_state(hwif, 0);
+ }
return ret;
}
@@ -42,13 +46,15 @@
struct request_pm_state rqpm;
int err;
- /* call ACPI _PS0 / _STM only once */
- if ((drive->dn & 1) == 0 || pair == NULL) {
- ide_acpi_set_state(hwif, 1);
- ide_acpi_push_timing(hwif);
- }
+ if (ide_port_acpi(hwif)) {
+ /* call ACPI _PS0 / _STM only once */
+ if ((drive->dn & 1) == 0 || pair == NULL) {
+ ide_acpi_set_state(hwif, 1);
+ ide_acpi_push_timing(hwif);
+ }
- ide_acpi_exec_tfs(drive);
+ ide_acpi_exec_tfs(drive);
+ }
memset(&rqpm, 0, sizeof(rqpm));
rq = blk_get_request(drive->queue, READ, __GFP_WAIT);
diff --git a/drivers/ide/ide-probe.c b/drivers/ide/ide-probe.c
index 51af4ee..1bb106f 100644
--- a/drivers/ide/ide-probe.c
+++ b/drivers/ide/ide-probe.c
@@ -818,6 +818,24 @@
return j;
}
+static void ide_host_enable_irqs(struct ide_host *host)
+{
+ ide_hwif_t *hwif;
+ int i;
+
+ ide_host_for_each_port(i, hwif, host) {
+ if (hwif == NULL)
+ continue;
+
+ /* clear any pending IRQs */
+ hwif->tp_ops->read_status(hwif);
+
+ /* unmask IRQs */
+ if (hwif->io_ports.ctl_addr)
+ hwif->tp_ops->write_devctl(hwif, ATA_DEVCTL_OBS);
+ }
+}
+
/*
* This routine sets up the IRQ for an IDE interface.
*/
@@ -831,9 +849,6 @@
if (irq_handler == NULL)
irq_handler = ide_intr;
- if (io_ports->ctl_addr)
- hwif->tp_ops->write_devctl(hwif, ATA_DEVCTL_OBS);
-
if (request_irq(hwif->irq, irq_handler, sa, hwif->name, hwif))
goto out_up;
@@ -1404,6 +1419,8 @@
ide_port_tune_devices(hwif);
}
+ ide_host_enable_irqs(host);
+
ide_host_for_each_port(i, hwif, host) {
if (hwif == NULL)
continue;
diff --git a/drivers/ieee1394/sbp2.c b/drivers/ieee1394/sbp2.c
index 83b734a..52b25f8 100644
--- a/drivers/ieee1394/sbp2.c
+++ b/drivers/ieee1394/sbp2.c
@@ -880,6 +880,7 @@
}
shost->hostdata[0] = (unsigned long)lu;
+ shost->max_cmd_len = SBP2_MAX_CDB_SIZE;
if (!scsi_add_host(shost, &ud->device)) {
lu->shost = shost;
diff --git a/drivers/ieee1394/sbp2.h b/drivers/ieee1394/sbp2.h
index c5036f1..64a3a66 100644
--- a/drivers/ieee1394/sbp2.h
+++ b/drivers/ieee1394/sbp2.h
@@ -25,6 +25,12 @@
#define SBP2_DEVICE_NAME "sbp2"
/*
+ * There is no transport protocol limit to the CDB length, but we implement
+ * a fixed length only. 16 bytes is enough for disks larger than 2 TB.
+ */
+#define SBP2_MAX_CDB_SIZE 16
+
+/*
* SBP-2 specific definitions
*/
@@ -51,7 +57,7 @@
u32 data_descriptor_hi;
u32 data_descriptor_lo;
u32 misc;
- u8 cdb[12];
+ u8 cdb[SBP2_MAX_CDB_SIZE];
} __attribute__((packed));
#define SBP2_LOGIN_REQUEST 0x0
diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig
index 9d8f796..a6b989a 100644
--- a/drivers/input/keyboard/Kconfig
+++ b/drivers/input/keyboard/Kconfig
@@ -12,6 +12,42 @@
if INPUT_KEYBOARD
+config KEYBOARD_AAED2000
+ tristate "AAED-2000 keyboard"
+ depends on MACH_AAED2000
+ select INPUT_POLLDEV
+ default y
+ help
+ Say Y here to enable the keyboard on the Agilent AAED-2000
+ development board.
+
+ To compile this driver as a module, choose M here: the
+ module will be called aaed2000_kbd.
+
+config KEYBOARD_AMIGA
+ tristate "Amiga keyboard"
+ depends on AMIGA
+ help
+ Say Y here if you are running Linux on any AMIGA and have a keyboard
+ attached.
+
+ To compile this driver as a module, choose M here: the
+ module will be called amikbd.
+
+config ATARI_KBD_CORE
+ bool
+
+config KEYBOARD_ATARI
+ tristate "Atari keyboard"
+ depends on ATARI
+ select ATARI_KBD_CORE
+ help
+ Say Y here if you are running Linux on any Atari and have a keyboard
+ attached.
+
+ To compile this driver as a module, choose M here: the
+ module will be called atakbd.
+
config KEYBOARD_ATKBD
tristate "AT keyboard" if EMBEDDED || !X86
default y
@@ -68,16 +104,25 @@
right-hand column will be interpreted as the key shown in the
left-hand column.
-config KEYBOARD_SUNKBD
- tristate "Sun Type 4 and Type 5 keyboard"
- select SERIO
+config KEYBOARD_BFIN
+ tristate "Blackfin BF54x keypad support"
+ depends on (BF54x && !BF544)
help
- Say Y here if you want to use a Sun Type 4 or Type 5 keyboard,
- connected either to the Sun keyboard connector or to an serial
- (RS-232) port via a simple adapter.
+ Say Y here if you want to use the BF54x keypad.
To compile this driver as a module, choose M here: the
- module will be called sunkbd.
+ module will be called bf54x-keys.
+
+config KEYBOARD_CORGI
+ tristate "Corgi keyboard"
+ depends on PXA_SHARPSL
+ default y
+ help
+ Say Y here to enable the keyboard on the Sharp Zaurus SL-C7xx
+ series of PDAs.
+
+ To compile this driver as a module, choose M here: the
+ module will be called corgikbd.
config KEYBOARD_LKKBD
tristate "DECstation/VAXstation LK201/LK401 keyboard"
@@ -91,113 +136,38 @@
To compile this driver as a module, choose M here: the
module will be called lkkbd.
-config KEYBOARD_LOCOMO
- tristate "LoCoMo Keyboard Support"
- depends on SHARP_LOCOMO && INPUT_KEYBOARD
+config KEYBOARD_EP93XX
+ tristate "EP93xx Matrix Keypad support"
+ depends on ARCH_EP93XX
help
- Say Y here if you are running Linux on a Sharp Zaurus Collie or Poodle based PDA
+ Say Y here to enable the matrix keypad on the Cirrus EP93XX.
To compile this driver as a module, choose M here: the
- module will be called locomokbd.
+ module will be called ep93xx_keypad.
-config KEYBOARD_XTKBD
- tristate "XT keyboard"
- select SERIO
+config KEYBOARD_GPIO
+ tristate "GPIO Buttons"
+ depends on GENERIC_GPIO
help
- Say Y here if you want to use the old IBM PC/XT keyboard (or
- compatible) on your system. This is only possible with a
- parallel port keyboard adapter, you cannot connect it to the
- keyboard port on a PC that runs Linux.
+ This driver implements support for buttons connected
+ to GPIO pins of various CPUs (and some other chips).
+
+ Say Y here if your device has buttons connected
+ directly to such GPIO pins. Your board-specific
+ setup logic must also provide a platform device,
+ with configuration data saying which GPIOs are used.
To compile this driver as a module, choose M here: the
- module will be called xtkbd.
+ module will be called gpio_keys.
-config KEYBOARD_NEWTON
- tristate "Newton keyboard"
- select SERIO
+config KEYBOARD_MATRIX
+ tristate "GPIO driven matrix keypad support"
+ depends on GENERIC_GPIO
help
- Say Y here if you have a Newton keyboard on a serial port.
+ Enable support for GPIO driven matrix keypad.
To compile this driver as a module, choose M here: the
- module will be called newtonkbd.
-
-config KEYBOARD_STOWAWAY
- tristate "Stowaway keyboard"
- select SERIO
- help
- Say Y here if you have a Stowaway keyboard on a serial port.
- Stowaway compatible keyboards like Dicota Input-PDA keyboard
- are also supported by this driver.
-
- To compile this driver as a module, choose M here: the
- module will be called stowaway.
-
-config KEYBOARD_CORGI
- tristate "Corgi keyboard"
- depends on PXA_SHARPSL
- default y
- help
- Say Y here to enable the keyboard on the Sharp Zaurus SL-C7xx
- series of PDAs.
-
- To compile this driver as a module, choose M here: the
- module will be called corgikbd.
-
-config KEYBOARD_SPITZ
- tristate "Spitz keyboard"
- depends on PXA_SHARPSL
- default y
- help
- Say Y here to enable the keyboard on the Sharp Zaurus SL-C1000,
- SL-C3000 and Sl-C3100 series of PDAs.
-
- To compile this driver as a module, choose M here: the
- module will be called spitzkbd.
-
-config KEYBOARD_TOSA
- tristate "Tosa keyboard"
- depends on MACH_TOSA
- default y
- help
- Say Y here to enable the keyboard on the Sharp Zaurus SL-6000x (Tosa)
-
- To compile this driver as a module, choose M here: the
- module will be called tosakbd.
-
-config KEYBOARD_TOSA_USE_EXT_KEYCODES
- bool "Tosa keyboard: use extended keycodes"
- depends on KEYBOARD_TOSA
- default n
- help
- Say Y here to enable the tosa keyboard driver to generate extended
- (>= 127) keycodes. Be aware, that they can't be correctly interpreted
- by either console keyboard driver or by Kdrive keybd driver.
-
- Say Y only if you know, what you are doing!
-
-config KEYBOARD_AMIGA
- tristate "Amiga keyboard"
- depends on AMIGA
- help
- Say Y here if you are running Linux on any AMIGA and have a keyboard
- attached.
-
- To compile this driver as a module, choose M here: the
- module will be called amikbd.
-
-config ATARI_KBD_CORE
- bool
-
-config KEYBOARD_ATARI
- tristate "Atari keyboard"
- depends on ATARI
- select ATARI_KBD_CORE
- help
- Say Y here if you are running Linux on any Atari and have a keyboard
- attached.
-
- To compile this driver as a module, choose M here: the
- module will be called atakbd.
+ module will be called matrix_keypad.
config KEYBOARD_HIL_OLD
tristate "HP HIL keyboard support (simple driver)"
@@ -261,20 +231,39 @@
To compile this driver as a module, choose M here: the
module will be called lm8323.
-config KEYBOARD_OMAP
- tristate "TI OMAP keypad support"
- depends on (ARCH_OMAP1 || ARCH_OMAP2)
+config KEYBOARD_LOCOMO
+ tristate "LoCoMo Keyboard Support"
+ depends on SHARP_LOCOMO
help
- Say Y here if you want to use the OMAP keypad.
+ Say Y here if you are running Linux on a Sharp Zaurus Collie or Poodle based PDA
To compile this driver as a module, choose M here: the
- module will be called omap-keypad.
+ module will be called locomokbd.
+
+config KEYBOARD_MAPLE
+ tristate "Maple bus keyboard"
+ depends on SH_DREAMCAST && MAPLE
+ help
+ Say Y here if you have a Dreamcast console running Linux and have
+ a keyboard attached to its Maple bus.
+
+ To compile this driver as a module, choose M here: the
+ module will be called maple_keyb.
+
+config KEYBOARD_NEWTON
+ tristate "Newton keyboard"
+ select SERIO
+ help
+ Say Y here if you have a Newton keyboard on a serial port.
+
+ To compile this driver as a module, choose M here: the
+ module will be called newtonkbd.
config KEYBOARD_PXA27x
tristate "PXA27x/PXA3xx keypad support"
depends on PXA27x || PXA3xx
help
- Enable support for PXA27x/PXA3xx keypad controller
+ Enable support for PXA27x/PXA3xx keypad controller.
To compile this driver as a module, choose M here: the
module will be called pxa27x_keypad.
@@ -288,51 +277,38 @@
To compile this driver as a module, choose M here: the
module will be called pxa930_rotary.
-config KEYBOARD_AAED2000
- tristate "AAED-2000 keyboard"
- depends on MACH_AAED2000
- select INPUT_POLLDEV
+config KEYBOARD_SPITZ
+ tristate "Spitz keyboard"
+ depends on PXA_SHARPSL
default y
help
- Say Y here to enable the keyboard on the Agilent AAED-2000
- development board.
+ Say Y here to enable the keyboard on the Sharp Zaurus SL-C1000,
+ SL-C3000 and Sl-C3100 series of PDAs.
To compile this driver as a module, choose M here: the
- module will be called aaed2000_kbd.
+ module will be called spitzkbd.
-config KEYBOARD_GPIO
- tristate "GPIO Buttons"
- depends on GENERIC_GPIO
+config KEYBOARD_STOWAWAY
+ tristate "Stowaway keyboard"
+ select SERIO
help
- This driver implements support for buttons connected
- to GPIO pins of various CPUs (and some other chips).
-
- Say Y here if your device has buttons connected
- directly to such GPIO pins. Your board-specific
- setup logic must also provide a platform device,
- with configuration data saying which GPIOs are used.
+ Say Y here if you have a Stowaway keyboard on a serial port.
+ Stowaway compatible keyboards like Dicota Input-PDA keyboard
+ are also supported by this driver.
To compile this driver as a module, choose M here: the
- module will be called gpio-keys.
+ module will be called stowaway.
-config KEYBOARD_MAPLE
- tristate "Maple bus keyboard"
- depends on SH_DREAMCAST && MAPLE
+config KEYBOARD_SUNKBD
+ tristate "Sun Type 4 and Type 5 keyboard"
+ select SERIO
help
- Say Y here if you have a Dreamcast console running Linux and have
- a keyboard attached to its Maple bus.
+ Say Y here if you want to use a Sun Type 4 or Type 5 keyboard,
+ connected either to the Sun keyboard connector or to an serial
+ (RS-232) port via a simple adapter.
To compile this driver as a module, choose M here: the
- module will be called maple_keyb.
-
-config KEYBOARD_BFIN
- tristate "Blackfin BF54x keypad support"
- depends on (BF54x && !BF544)
- help
- Say Y here if you want to use the BF54x keypad.
-
- To compile this driver as a module, choose M here: the
- module will be called bf54x-keys.
+ module will be called sunkbd.
config KEYBOARD_SH_KEYSC
tristate "SuperH KEYSC keypad support"
@@ -344,13 +320,45 @@
To compile this driver as a module, choose M here: the
module will be called sh_keysc.
-config KEYBOARD_EP93XX
- tristate "EP93xx Matrix Keypad support"
- depends on ARCH_EP93XX
+config KEYBOARD_OMAP
+ tristate "TI OMAP keypad support"
+ depends on (ARCH_OMAP1 || ARCH_OMAP2)
help
- Say Y here to enable the matrix keypad on the Cirrus EP93XX.
+ Say Y here if you want to use the OMAP keypad.
To compile this driver as a module, choose M here: the
- module will be called ep93xx_keypad.
+ module will be called omap-keypad.
+
+config KEYBOARD_TOSA
+ tristate "Tosa keyboard"
+ depends on MACH_TOSA
+ default y
+ help
+ Say Y here to enable the keyboard on the Sharp Zaurus SL-6000x (Tosa)
+
+ To compile this driver as a module, choose M here: the
+ module will be called tosakbd.
+
+config KEYBOARD_TOSA_USE_EXT_KEYCODES
+ bool "Tosa keyboard: use extended keycodes"
+ depends on KEYBOARD_TOSA
+ help
+ Say Y here to enable the tosa keyboard driver to generate extended
+ (>= 127) keycodes. Be aware, that they can't be correctly interpreted
+ by either console keyboard driver or by Kdrive keybd driver.
+
+ Say Y only if you know, what you are doing!
+
+config KEYBOARD_XTKBD
+ tristate "XT keyboard"
+ select SERIO
+ help
+ Say Y here if you want to use the old IBM PC/XT keyboard (or
+ compatible) on your system. This is only possible with a
+ parallel port keyboard adapter, you cannot connect it to the
+ keyboard port on a PC that runs Linux.
+
+ To compile this driver as a module, choose M here: the
+ module will be called xtkbd.
endif
diff --git a/drivers/input/keyboard/Makefile b/drivers/input/keyboard/Makefile
index 156b647..b5b5eae 100644
--- a/drivers/input/keyboard/Makefile
+++ b/drivers/input/keyboard/Makefile
@@ -4,29 +4,30 @@
# Each configuration option enables a list of files.
-obj-$(CONFIG_KEYBOARD_ATKBD) += atkbd.o
-obj-$(CONFIG_KEYBOARD_SUNKBD) += sunkbd.o
-obj-$(CONFIG_KEYBOARD_LKKBD) += lkkbd.o
-obj-$(CONFIG_KEYBOARD_XTKBD) += xtkbd.o
+obj-$(CONFIG_KEYBOARD_AAED2000) += aaed2000_kbd.o
obj-$(CONFIG_KEYBOARD_AMIGA) += amikbd.o
obj-$(CONFIG_KEYBOARD_ATARI) += atakbd.o
-obj-$(CONFIG_KEYBOARD_LOCOMO) += locomokbd.o
-obj-$(CONFIG_KEYBOARD_NEWTON) += newtonkbd.o
-obj-$(CONFIG_KEYBOARD_STOWAWAY) += stowaway.o
+obj-$(CONFIG_KEYBOARD_ATKBD) += atkbd.o
+obj-$(CONFIG_KEYBOARD_BFIN) += bf54x-keys.o
obj-$(CONFIG_KEYBOARD_CORGI) += corgikbd.o
-obj-$(CONFIG_KEYBOARD_SPITZ) += spitzkbd.o
-obj-$(CONFIG_KEYBOARD_TOSA) += tosakbd.o
+obj-$(CONFIG_KEYBOARD_EP93XX) += ep93xx_keypad.o
+obj-$(CONFIG_KEYBOARD_GPIO) += gpio_keys.o
obj-$(CONFIG_KEYBOARD_HIL) += hil_kbd.o
obj-$(CONFIG_KEYBOARD_HIL_OLD) += hilkbd.o
+obj-$(CONFIG_KEYBOARD_HP6XX) += jornada680_kbd.o
+obj-$(CONFIG_KEYBOARD_HP7XX) += jornada720_kbd.o
+obj-$(CONFIG_KEYBOARD_LKKBD) += lkkbd.o
obj-$(CONFIG_KEYBOARD_LM8323) += lm8323.o
+obj-$(CONFIG_KEYBOARD_LOCOMO) += locomokbd.o
+obj-$(CONFIG_KEYBOARD_MAPLE) += maple_keyb.o
+obj-$(CONFIG_KEYBOARD_MATRIX) += matrix_keypad.o
+obj-$(CONFIG_KEYBOARD_NEWTON) += newtonkbd.o
obj-$(CONFIG_KEYBOARD_OMAP) += omap-keypad.o
obj-$(CONFIG_KEYBOARD_PXA27x) += pxa27x_keypad.o
obj-$(CONFIG_KEYBOARD_PXA930_ROTARY) += pxa930_rotary.o
-obj-$(CONFIG_KEYBOARD_AAED2000) += aaed2000_kbd.o
-obj-$(CONFIG_KEYBOARD_GPIO) += gpio_keys.o
-obj-$(CONFIG_KEYBOARD_HP6XX) += jornada680_kbd.o
-obj-$(CONFIG_KEYBOARD_HP7XX) += jornada720_kbd.o
-obj-$(CONFIG_KEYBOARD_MAPLE) += maple_keyb.o
-obj-$(CONFIG_KEYBOARD_BFIN) += bf54x-keys.o
obj-$(CONFIG_KEYBOARD_SH_KEYSC) += sh_keysc.o
-obj-$(CONFIG_KEYBOARD_EP93XX) += ep93xx_keypad.o
+obj-$(CONFIG_KEYBOARD_SPITZ) += spitzkbd.o
+obj-$(CONFIG_KEYBOARD_STOWAWAY) += stowaway.o
+obj-$(CONFIG_KEYBOARD_SUNKBD) += sunkbd.o
+obj-$(CONFIG_KEYBOARD_TOSA) += tosakbd.o
+obj-$(CONFIG_KEYBOARD_XTKBD) += xtkbd.o
diff --git a/drivers/input/keyboard/gpio_keys.c b/drivers/input/keyboard/gpio_keys.c
index 2157cd7..efed0c9 100644
--- a/drivers/input/keyboard/gpio_keys.c
+++ b/drivers/input/keyboard/gpio_keys.c
@@ -29,7 +29,8 @@
struct gpio_button_data {
struct gpio_keys_button *button;
struct input_dev *input;
- struct delayed_work work;
+ struct timer_list timer;
+ struct work_struct work;
};
struct gpio_keys_drvdata {
@@ -40,7 +41,7 @@
static void gpio_keys_report_event(struct work_struct *work)
{
struct gpio_button_data *bdata =
- container_of(work, struct gpio_button_data, work.work);
+ container_of(work, struct gpio_button_data, work);
struct gpio_keys_button *button = bdata->button;
struct input_dev *input = bdata->input;
unsigned int type = button->type ?: EV_KEY;
@@ -50,17 +51,25 @@
input_sync(input);
}
+static void gpio_keys_timer(unsigned long _data)
+{
+ struct gpio_button_data *data = (struct gpio_button_data *)_data;
+
+ schedule_work(&data->work);
+}
+
static irqreturn_t gpio_keys_isr(int irq, void *dev_id)
{
struct gpio_button_data *bdata = dev_id;
struct gpio_keys_button *button = bdata->button;
- unsigned long delay;
BUG_ON(irq != gpio_to_irq(button->gpio));
- delay = button->debounce_interval ?
- msecs_to_jiffies(button->debounce_interval) : 0;
- schedule_delayed_work(&bdata->work, delay);
+ if (button->debounce_interval)
+ mod_timer(&bdata->timer,
+ jiffies + msecs_to_jiffies(button->debounce_interval));
+ else
+ schedule_work(&bdata->work);
return IRQ_HANDLED;
}
@@ -107,7 +116,9 @@
bdata->input = input;
bdata->button = button;
- INIT_DELAYED_WORK(&bdata->work, gpio_keys_report_event);
+ setup_timer(&bdata->timer,
+ gpio_keys_timer, (unsigned long)bdata);
+ INIT_WORK(&bdata->work, gpio_keys_report_event);
error = gpio_request(button->gpio, button->desc ?: "gpio_keys");
if (error < 0) {
@@ -166,7 +177,9 @@
fail2:
while (--i >= 0) {
free_irq(gpio_to_irq(pdata->buttons[i].gpio), &ddata->data[i]);
- cancel_delayed_work_sync(&ddata->data[i].work);
+ if (pdata->buttons[i].debounce_interval)
+ del_timer_sync(&ddata->data[i].timer);
+ cancel_work_sync(&ddata->data[i].work);
gpio_free(pdata->buttons[i].gpio);
}
@@ -190,7 +203,9 @@
for (i = 0; i < pdata->nbuttons; i++) {
int irq = gpio_to_irq(pdata->buttons[i].gpio);
free_irq(irq, &ddata->data[i]);
- cancel_delayed_work_sync(&ddata->data[i].work);
+ if (pdata->buttons[i].debounce_interval)
+ del_timer_sync(&ddata->data[i].timer);
+ cancel_work_sync(&ddata->data[i].work);
gpio_free(pdata->buttons[i].gpio);
}
diff --git a/drivers/input/keyboard/matrix_keypad.c b/drivers/input/keyboard/matrix_keypad.c
new file mode 100644
index 0000000..e9b2e7cb
--- /dev/null
+++ b/drivers/input/keyboard/matrix_keypad.c
@@ -0,0 +1,453 @@
+/*
+ * GPIO driven matrix keyboard driver
+ *
+ * Copyright (c) 2008 Marek Vasut <marek.vasut@gmail.com>
+ *
+ * Based on corgikbd.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/types.h>
+#include <linux/delay.h>
+#include <linux/platform_device.h>
+#include <linux/init.h>
+#include <linux/input.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/jiffies.h>
+#include <linux/module.h>
+#include <linux/gpio.h>
+#include <linux/input/matrix_keypad.h>
+
+struct matrix_keypad {
+ const struct matrix_keypad_platform_data *pdata;
+ struct input_dev *input_dev;
+ unsigned short *keycodes;
+
+ uint32_t last_key_state[MATRIX_MAX_COLS];
+ struct delayed_work work;
+ bool scan_pending;
+ bool stopped;
+ spinlock_t lock;
+};
+
+/*
+ * NOTE: normally the GPIO has to be put into HiZ when de-activated to cause
+ * minmal side effect when scanning other columns, here it is configured to
+ * be input, and it should work on most platforms.
+ */
+static void __activate_col(const struct matrix_keypad_platform_data *pdata,
+ int col, bool on)
+{
+ bool level_on = !pdata->active_low;
+
+ if (on) {
+ gpio_direction_output(pdata->col_gpios[col], level_on);
+ } else {
+ gpio_set_value_cansleep(pdata->col_gpios[col], !level_on);
+ gpio_direction_input(pdata->col_gpios[col]);
+ }
+}
+
+static void activate_col(const struct matrix_keypad_platform_data *pdata,
+ int col, bool on)
+{
+ __activate_col(pdata, col, on);
+
+ if (on && pdata->col_scan_delay_us)
+ udelay(pdata->col_scan_delay_us);
+}
+
+static void activate_all_cols(const struct matrix_keypad_platform_data *pdata,
+ bool on)
+{
+ int col;
+
+ for (col = 0; col < pdata->num_col_gpios; col++)
+ __activate_col(pdata, col, on);
+}
+
+static bool row_asserted(const struct matrix_keypad_platform_data *pdata,
+ int row)
+{
+ return gpio_get_value_cansleep(pdata->row_gpios[row]) ?
+ !pdata->active_low : pdata->active_low;
+}
+
+static void enable_row_irqs(struct matrix_keypad *keypad)
+{
+ const struct matrix_keypad_platform_data *pdata = keypad->pdata;
+ int i;
+
+ for (i = 0; i < pdata->num_row_gpios; i++)
+ enable_irq(gpio_to_irq(pdata->row_gpios[i]));
+}
+
+static void disable_row_irqs(struct matrix_keypad *keypad)
+{
+ const struct matrix_keypad_platform_data *pdata = keypad->pdata;
+ int i;
+
+ for (i = 0; i < pdata->num_row_gpios; i++)
+ disable_irq_nosync(gpio_to_irq(pdata->row_gpios[i]));
+}
+
+/*
+ * This gets the keys from keyboard and reports it to input subsystem
+ */
+static void matrix_keypad_scan(struct work_struct *work)
+{
+ struct matrix_keypad *keypad =
+ container_of(work, struct matrix_keypad, work.work);
+ struct input_dev *input_dev = keypad->input_dev;
+ const struct matrix_keypad_platform_data *pdata = keypad->pdata;
+ uint32_t new_state[MATRIX_MAX_COLS];
+ int row, col, code;
+
+ /* de-activate all columns for scanning */
+ activate_all_cols(pdata, false);
+
+ memset(new_state, 0, sizeof(new_state));
+
+ /* assert each column and read the row status out */
+ for (col = 0; col < pdata->num_col_gpios; col++) {
+
+ activate_col(pdata, col, true);
+
+ for (row = 0; row < pdata->num_row_gpios; row++)
+ new_state[col] |=
+ row_asserted(pdata, row) ? (1 << row) : 0;
+
+ activate_col(pdata, col, false);
+ }
+
+ for (col = 0; col < pdata->num_col_gpios; col++) {
+ uint32_t bits_changed;
+
+ bits_changed = keypad->last_key_state[col] ^ new_state[col];
+ if (bits_changed == 0)
+ continue;
+
+ for (row = 0; row < pdata->num_row_gpios; row++) {
+ if ((bits_changed & (1 << row)) == 0)
+ continue;
+
+ code = (row << 4) + col;
+ input_event(input_dev, EV_MSC, MSC_SCAN, code);
+ input_report_key(input_dev,
+ keypad->keycodes[code],
+ new_state[col] & (1 << row));
+ }
+ }
+ input_sync(input_dev);
+
+ memcpy(keypad->last_key_state, new_state, sizeof(new_state));
+
+ activate_all_cols(pdata, true);
+
+ /* Enable IRQs again */
+ spin_lock_irq(&keypad->lock);
+ keypad->scan_pending = false;
+ enable_row_irqs(keypad);
+ spin_unlock_irq(&keypad->lock);
+}
+
+static irqreturn_t matrix_keypad_interrupt(int irq, void *id)
+{
+ struct matrix_keypad *keypad = id;
+ unsigned long flags;
+
+ spin_lock_irqsave(&keypad->lock, flags);
+
+ /*
+ * See if another IRQ beaten us to it and scheduled the
+ * scan already. In that case we should not try to
+ * disable IRQs again.
+ */
+ if (unlikely(keypad->scan_pending || keypad->stopped))
+ goto out;
+
+ disable_row_irqs(keypad);
+ keypad->scan_pending = true;
+ schedule_delayed_work(&keypad->work,
+ msecs_to_jiffies(keypad->pdata->debounce_ms));
+
+out:
+ spin_unlock_irqrestore(&keypad->lock, flags);
+ return IRQ_HANDLED;
+}
+
+static int matrix_keypad_start(struct input_dev *dev)
+{
+ struct matrix_keypad *keypad = input_get_drvdata(dev);
+
+ keypad->stopped = false;
+ mb();
+
+ /*
+ * Schedule an immediate key scan to capture current key state;
+ * columns will be activated and IRQs be enabled after the scan.
+ */
+ schedule_delayed_work(&keypad->work, 0);
+
+ return 0;
+}
+
+static void matrix_keypad_stop(struct input_dev *dev)
+{
+ struct matrix_keypad *keypad = input_get_drvdata(dev);
+
+ keypad->stopped = true;
+ mb();
+ flush_work(&keypad->work.work);
+ /*
+ * matrix_keypad_scan() will leave IRQs enabled;
+ * we should disable them now.
+ */
+ disable_row_irqs(keypad);
+}
+
+#ifdef CONFIG_PM
+static int matrix_keypad_suspend(struct platform_device *pdev, pm_message_t state)
+{
+ struct matrix_keypad *keypad = platform_get_drvdata(pdev);
+ const struct matrix_keypad_platform_data *pdata = keypad->pdata;
+ int i;
+
+ matrix_keypad_stop(keypad->input_dev);
+
+ if (device_may_wakeup(&pdev->dev))
+ for (i = 0; i < pdata->num_row_gpios; i++)
+ enable_irq_wake(gpio_to_irq(pdata->row_gpios[i]));
+
+ return 0;
+}
+
+static int matrix_keypad_resume(struct platform_device *pdev)
+{
+ struct matrix_keypad *keypad = platform_get_drvdata(pdev);
+ const struct matrix_keypad_platform_data *pdata = keypad->pdata;
+ int i;
+
+ if (device_may_wakeup(&pdev->dev))
+ for (i = 0; i < pdata->num_row_gpios; i++)
+ disable_irq_wake(gpio_to_irq(pdata->row_gpios[i]));
+
+ matrix_keypad_start(keypad->input_dev);
+
+ return 0;
+}
+#else
+#define matrix_keypad_suspend NULL
+#define matrix_keypad_resume NULL
+#endif
+
+static int __devinit init_matrix_gpio(struct platform_device *pdev,
+ struct matrix_keypad *keypad)
+{
+ const struct matrix_keypad_platform_data *pdata = keypad->pdata;
+ int i, err = -EINVAL;
+
+ /* initialized strobe lines as outputs, activated */
+ for (i = 0; i < pdata->num_col_gpios; i++) {
+ err = gpio_request(pdata->col_gpios[i], "matrix_kbd_col");
+ if (err) {
+ dev_err(&pdev->dev,
+ "failed to request GPIO%d for COL%d\n",
+ pdata->col_gpios[i], i);
+ goto err_free_cols;
+ }
+
+ gpio_direction_output(pdata->col_gpios[i], !pdata->active_low);
+ }
+
+ for (i = 0; i < pdata->num_row_gpios; i++) {
+ err = gpio_request(pdata->row_gpios[i], "matrix_kbd_row");
+ if (err) {
+ dev_err(&pdev->dev,
+ "failed to request GPIO%d for ROW%d\n",
+ pdata->row_gpios[i], i);
+ goto err_free_rows;
+ }
+
+ gpio_direction_input(pdata->row_gpios[i]);
+ }
+
+ for (i = 0; i < pdata->num_row_gpios; i++) {
+ err = request_irq(gpio_to_irq(pdata->row_gpios[i]),
+ matrix_keypad_interrupt,
+ IRQF_DISABLED |
+ IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
+ "matrix-keypad", keypad);
+ if (err) {
+ dev_err(&pdev->dev,
+ "Unable to acquire interrupt for GPIO line %i\n",
+ pdata->row_gpios[i]);
+ goto err_free_irqs;
+ }
+ }
+
+ /* initialized as disabled - enabled by input->open */
+ disable_row_irqs(keypad);
+ return 0;
+
+err_free_irqs:
+ while (--i >= 0)
+ free_irq(gpio_to_irq(pdata->row_gpios[i]), keypad);
+ i = pdata->num_row_gpios;
+err_free_rows:
+ while (--i >= 0)
+ gpio_free(pdata->row_gpios[i]);
+ i = pdata->num_col_gpios;
+err_free_cols:
+ while (--i >= 0)
+ gpio_free(pdata->col_gpios[i]);
+
+ return err;
+}
+
+static int __devinit matrix_keypad_probe(struct platform_device *pdev)
+{
+ const struct matrix_keypad_platform_data *pdata;
+ const struct matrix_keymap_data *keymap_data;
+ struct matrix_keypad *keypad;
+ struct input_dev *input_dev;
+ unsigned short *keycodes;
+ int i;
+ int err;
+
+ pdata = pdev->dev.platform_data;
+ if (!pdata) {
+ dev_err(&pdev->dev, "no platform data defined\n");
+ return -EINVAL;
+ }
+
+ keymap_data = pdata->keymap_data;
+ if (!keymap_data) {
+ dev_err(&pdev->dev, "no keymap data defined\n");
+ return -EINVAL;
+ }
+
+ if (!keymap_data->max_keymap_size) {
+ dev_err(&pdev->dev, "invalid keymap data supplied\n");
+ return -EINVAL;
+ }
+
+ keypad = kzalloc(sizeof(struct matrix_keypad), GFP_KERNEL);
+ keycodes = kzalloc(keymap_data->max_keymap_size *
+ sizeof(keypad->keycodes),
+ GFP_KERNEL);
+ input_dev = input_allocate_device();
+ if (!keypad || !keycodes || !input_dev) {
+ err = -ENOMEM;
+ goto err_free_mem;
+ }
+
+ keypad->input_dev = input_dev;
+ keypad->pdata = pdata;
+ keypad->keycodes = keycodes;
+ keypad->stopped = true;
+ INIT_DELAYED_WORK(&keypad->work, matrix_keypad_scan);
+ spin_lock_init(&keypad->lock);
+
+ input_dev->name = pdev->name;
+ input_dev->id.bustype = BUS_HOST;
+ input_dev->dev.parent = &pdev->dev;
+ input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REP);
+ input_dev->open = matrix_keypad_start;
+ input_dev->close = matrix_keypad_stop;
+
+ input_dev->keycode = keycodes;
+ input_dev->keycodesize = sizeof(*keycodes);
+ input_dev->keycodemax = keymap_data->max_keymap_size;
+
+ for (i = 0; i < keymap_data->keymap_size; i++) {
+ unsigned int key = keymap_data->keymap[i];
+ unsigned int row = KEY_ROW(key);
+ unsigned int col = KEY_COL(key);
+ unsigned short code = KEY_VAL(key);
+
+ keycodes[(row << 4) + col] = code;
+ __set_bit(code, input_dev->keybit);
+ }
+ __clear_bit(KEY_RESERVED, input_dev->keybit);
+
+ input_set_capability(input_dev, EV_MSC, MSC_SCAN);
+ input_set_drvdata(input_dev, keypad);
+
+ err = init_matrix_gpio(pdev, keypad);
+ if (err)
+ goto err_free_mem;
+
+ err = input_register_device(keypad->input_dev);
+ if (err)
+ goto err_free_mem;
+
+ device_init_wakeup(&pdev->dev, pdata->wakeup);
+ platform_set_drvdata(pdev, keypad);
+
+ return 0;
+
+err_free_mem:
+ input_free_device(input_dev);
+ kfree(keycodes);
+ kfree(keypad);
+ return err;
+}
+
+static int __devexit matrix_keypad_remove(struct platform_device *pdev)
+{
+ struct matrix_keypad *keypad = platform_get_drvdata(pdev);
+ const struct matrix_keypad_platform_data *pdata = keypad->pdata;
+ int i;
+
+ device_init_wakeup(&pdev->dev, 0);
+
+ for (i = 0; i < pdata->num_row_gpios; i++) {
+ free_irq(gpio_to_irq(pdata->row_gpios[i]), keypad);
+ gpio_free(pdata->row_gpios[i]);
+ }
+
+ for (i = 0; i < pdata->num_col_gpios; i++)
+ gpio_free(pdata->col_gpios[i]);
+
+ input_unregister_device(keypad->input_dev);
+ platform_set_drvdata(pdev, NULL);
+ kfree(keypad->keycodes);
+ kfree(keypad);
+
+ return 0;
+}
+
+static struct platform_driver matrix_keypad_driver = {
+ .probe = matrix_keypad_probe,
+ .remove = __devexit_p(matrix_keypad_remove),
+ .suspend = matrix_keypad_suspend,
+ .resume = matrix_keypad_resume,
+ .driver = {
+ .name = "matrix-keypad",
+ .owner = THIS_MODULE,
+ },
+};
+
+static int __init matrix_keypad_init(void)
+{
+ return platform_driver_register(&matrix_keypad_driver);
+}
+
+static void __exit matrix_keypad_exit(void)
+{
+ platform_driver_unregister(&matrix_keypad_driver);
+}
+
+module_init(matrix_keypad_init);
+module_exit(matrix_keypad_exit);
+
+MODULE_AUTHOR("Marek Vasut <marek.vasut@gmail.com>");
+MODULE_DESCRIPTION("GPIO Driven Matrix Keypad Driver");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:matrix-keypad");
diff --git a/drivers/input/misc/cobalt_btns.c b/drivers/input/misc/cobalt_btns.c
index 2adf9cb..d114d3a 100644
--- a/drivers/input/misc/cobalt_btns.c
+++ b/drivers/input/misc/cobalt_btns.c
@@ -1,7 +1,7 @@
/*
* Cobalt button interface driver.
*
- * Copyright (C) 2007-2008 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ * Copyright (C) 2007-2008 Yoichi Yuasa <yuasa@linux-mips.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -148,7 +148,7 @@
return 0;
}
-MODULE_AUTHOR("Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>");
+MODULE_AUTHOR("Yoichi Yuasa <yuasa@linux-mips.org>");
MODULE_DESCRIPTION("Cobalt button interface driver");
MODULE_LICENSE("GPL");
/* work with hotplug and coldplug */
diff --git a/drivers/input/mouse/gpio_mouse.c b/drivers/input/mouse/gpio_mouse.c
index 5e5eb88..7b6ce17 100644
--- a/drivers/input/mouse/gpio_mouse.c
+++ b/drivers/input/mouse/gpio_mouse.c
@@ -46,7 +46,7 @@
input_sync(input);
}
-static int __init gpio_mouse_probe(struct platform_device *pdev)
+static int __devinit gpio_mouse_probe(struct platform_device *pdev)
{
struct gpio_mouse_platform_data *pdata = pdev->dev.platform_data;
struct input_polled_dev *input_poll;
@@ -170,10 +170,8 @@
return 0;
}
-/* work with hotplug and coldplug */
-MODULE_ALIAS("platform:gpio_mouse");
-
static struct platform_driver gpio_mouse_device_driver = {
+ .probe = gpio_mouse_probe,
.remove = __devexit_p(gpio_mouse_remove),
.driver = {
.name = "gpio_mouse",
@@ -183,8 +181,7 @@
static int __init gpio_mouse_init(void)
{
- return platform_driver_probe(&gpio_mouse_device_driver,
- gpio_mouse_probe);
+ return platform_driver_register(&gpio_mouse_device_driver);
}
module_init(gpio_mouse_init);
@@ -197,3 +194,5 @@
MODULE_AUTHOR("Hans-Christian Egtvedt <hcegtvedt@atmel.com>");
MODULE_DESCRIPTION("GPIO mouse driver");
MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:gpio_mouse"); /* work with hotplug and coldplug */
+
diff --git a/drivers/input/serio/i8042-x86ia64io.h b/drivers/input/serio/i8042-x86ia64io.h
index fb8a3cd..924e8ed 100644
--- a/drivers/input/serio/i8042-x86ia64io.h
+++ b/drivers/input/serio/i8042-x86ia64io.h
@@ -392,6 +392,34 @@
DMI_MATCH(DMI_BOARD_VENDOR, "LG Electronics Inc."),
},
},
+ {
+ .ident = "Acer Aspire One 150",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "AOA150"),
+ },
+ },
+ {
+ .ident = "Advent 4211",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "DIXONSXP"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Advent 4211"),
+ },
+ },
+ {
+ .ident = "Medion Akoya Mini E1210",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "MEDION"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "E1210"),
+ },
+ },
+ {
+ .ident = "Mivvy M310",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "VIOOO"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "N10"),
+ },
+ },
{ }
};
diff --git a/drivers/input/serio/i8042.c b/drivers/input/serio/i8042.c
index f919bf5..582245c 100644
--- a/drivers/input/serio/i8042.c
+++ b/drivers/input/serio/i8042.c
@@ -934,10 +934,11 @@
static int i8042_suspend(struct platform_device *dev, pm_message_t state)
{
- if (!i8042_suspended && state.event == PM_EVENT_SUSPEND) {
+ if (!i8042_suspended && state.event == PM_EVENT_SUSPEND)
i8042_controller_reset();
- i8042_suspended = true;
- }
+
+ i8042_suspended = state.event == PM_EVENT_SUSPEND ||
+ state.event == PM_EVENT_FREEZE;
return 0;
}
diff --git a/drivers/input/serio/serio.c b/drivers/input/serio/serio.c
index fb17573..d66f494 100644
--- a/drivers/input/serio/serio.c
+++ b/drivers/input/serio/serio.c
@@ -935,10 +935,11 @@
{
struct serio *serio = to_serio_port(dev);
- if (!serio->suspended && state.event == PM_EVENT_SUSPEND) {
+ if (!serio->suspended && state.event == PM_EVENT_SUSPEND)
serio_cleanup(serio);
- serio->suspended = true;
- }
+
+ serio->suspended = state.event == PM_EVENT_SUSPEND ||
+ state.event == PM_EVENT_FREEZE;
return 0;
}
diff --git a/drivers/input/tablet/wacom_wac.c b/drivers/input/tablet/wacom_wac.c
index 38bf863..c896d6a 100644
--- a/drivers/input/tablet/wacom_wac.c
+++ b/drivers/input/tablet/wacom_wac.c
@@ -384,6 +384,8 @@
wacom_report_key(wcombo, BTN_STYLUS2, 0);
wacom_report_key(wcombo, BTN_TOUCH, 0);
wacom_report_abs(wcombo, ABS_WHEEL, 0);
+ if (wacom->features->type >= INTUOS3S)
+ wacom_report_abs(wcombo, ABS_Z, 0);
}
wacom_report_key(wcombo, wacom->tool[idx], 0);
wacom_report_abs(wcombo, ABS_MISC, 0); /* reset tool id */
@@ -836,6 +838,7 @@
{ "Wacom DTU710", 8, 34080, 27660, 511, 0, PL },
{ "Wacom DTF521", 8, 6282, 4762, 511, 0, PL },
{ "Wacom DTF720", 8, 6858, 5506, 511, 0, PL },
+ { "Wacom DTF720a", 8, 6858, 5506, 511, 0, PL },
{ "Wacom Cintiq Partner",8, 20480, 15360, 511, 0, PTU },
{ "Wacom Intuos2 4x5", 10, 12700, 10600, 1023, 31, INTUOS },
{ "Wacom Intuos2 6x8", 10, 20320, 16240, 1023, 31, INTUOS },
@@ -897,8 +900,9 @@
{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x37) },
{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x38) },
{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x39) },
- { USB_DEVICE(USB_VENDOR_ID_WACOM, 0xC0) },
{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0xC4) },
+ { USB_DEVICE(USB_VENDOR_ID_WACOM, 0xC0) },
+ { USB_DEVICE(USB_VENDOR_ID_WACOM, 0xC2) },
{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x03) },
{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x41) },
{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x42) },
diff --git a/drivers/isdn/gigaset/ev-layer.c b/drivers/isdn/gigaset/ev-layer.c
index ec51696..2d91049 100644
--- a/drivers/isdn/gigaset/ev-layer.c
+++ b/drivers/isdn/gigaset/ev-layer.c
@@ -294,32 +294,33 @@
{RSP_OK, 604,604, -1, 605, 5, {ACT_CMD+AT_MSN}},
{RSP_OK, 605,605, -1, 606, 5, {ACT_CMD+AT_ISO}},
{RSP_NULL, 605,605, -1, 606, 5, {ACT_CMD+AT_ISO}},
- {RSP_OK, 606,606, -1, 607, 5, {0}, "+VLS=17\r"}, /* set "Endgeraetemodus" */
+ {RSP_OK, 606,606, -1, 607, 5, {0}, "+VLS=17\r"},
{RSP_OK, 607,607, -1, 608,-1},
- //{RSP_ZSAU, 608,608,ZSAU_PROCEEDING, 608, 0, {ACT_ERROR}},//DELETE
{RSP_ZSAU, 608,608,ZSAU_PROCEEDING, 609, 5, {ACT_CMD+AT_DIAL}},
{RSP_OK, 609,609, -1, 650, 0, {ACT_DIALING}},
- {RSP_ZVLS, 608,608, 17, -1,-1, {ACT_DEBUG}},
- {RSP_ZCTP, 609,609, -1, -1,-1, {ACT_DEBUG}},
- {RSP_ZCPN, 609,609, -1, -1,-1, {ACT_DEBUG}},
{RSP_ERROR, 601,609, -1, 0, 0, {ACT_ABORTDIAL}},
{EV_TIMEOUT, 601,609, -1, 0, 0, {ACT_ABORTDIAL}},
- /* dialing */
- {RSP_ZCTP, 650,650, -1, -1,-1, {ACT_DEBUG}},
- {RSP_ZCPN, 650,650, -1, -1,-1, {ACT_DEBUG}},
- {RSP_ZSAU, 650,650,ZSAU_CALL_DELIVERED, -1,-1, {ACT_DEBUG}}, /* some devices don't send this */
+ /* optional dialing responses */
+ {EV_BC_OPEN, 650,650, -1, 651,-1},
+ {RSP_ZVLS, 608,651, 17, -1,-1, {ACT_DEBUG}},
+ {RSP_ZCTP, 609,651, -1, -1,-1, {ACT_DEBUG}},
+ {RSP_ZCPN, 609,651, -1, -1,-1, {ACT_DEBUG}},
+ {RSP_ZSAU, 650,651,ZSAU_CALL_DELIVERED, -1,-1, {ACT_DEBUG}},
- /* connection established */
- {RSP_ZSAU, 650,650,ZSAU_ACTIVE, 800,-1, {ACT_CONNECT}}, //FIXME -> DLE1
- {RSP_ZSAU, 750,750,ZSAU_ACTIVE, 800,-1, {ACT_CONNECT}}, //FIXME -> DLE1
-
- {EV_BC_OPEN, 800,800, -1, 800,-1, {ACT_NOTIFY_BC_UP}}, //FIXME new constate + timeout
+ /* connect */
+ {RSP_ZSAU, 650,650,ZSAU_ACTIVE, 800,-1, {ACT_CONNECT}},
+ {RSP_ZSAU, 651,651,ZSAU_ACTIVE, 800,-1, {ACT_CONNECT,
+ ACT_NOTIFY_BC_UP}},
+ {RSP_ZSAU, 750,750,ZSAU_ACTIVE, 800,-1, {ACT_CONNECT}},
+ {RSP_ZSAU, 751,751,ZSAU_ACTIVE, 800,-1, {ACT_CONNECT,
+ ACT_NOTIFY_BC_UP}},
+ {EV_BC_OPEN, 800,800, -1, 800,-1, {ACT_NOTIFY_BC_UP}},
/* remote hangup */
- {RSP_ZSAU, 650,650,ZSAU_DISCONNECT_IND, 0, 0, {ACT_REMOTEREJECT}},
- {RSP_ZSAU, 750,750,ZSAU_DISCONNECT_IND, 0, 0, {ACT_REMOTEHUP}},
+ {RSP_ZSAU, 650,651,ZSAU_DISCONNECT_IND, 0, 0, {ACT_REMOTEREJECT}},
+ {RSP_ZSAU, 750,751,ZSAU_DISCONNECT_IND, 0, 0, {ACT_REMOTEHUP}},
{RSP_ZSAU, 800,800,ZSAU_DISCONNECT_IND, 0, 0, {ACT_REMOTEHUP}},
/* hangup */
@@ -358,7 +359,8 @@
{RSP_ZSAU, 700,729,ZSAU_ACTIVE, 0, 0, {ACT_ABORTACCEPT}},
{RSP_ZSAU, 700,729,ZSAU_DISCONNECT_IND, 0, 0, {ACT_ABORTACCEPT}},
- {EV_TIMEOUT, 750,750, -1, 0, 0, {ACT_CONNTIMEOUT}},
+ {EV_BC_OPEN, 750,750, -1, 751,-1},
+ {EV_TIMEOUT, 750,751, -1, 0, 0, {ACT_CONNTIMEOUT}},
/* B channel closed (general case) */
{EV_BC_CLOSED, -1, -1, -1, -1,-1, {ACT_NOTIFY_BC_DOWN}}, //FIXME
@@ -876,12 +878,6 @@
static void bchannel_up(struct bc_state *bcs)
{
- if (!(bcs->chstate & CHS_D_UP)) {
- dev_notice(bcs->cs->dev, "%s: D channel not up\n", __func__);
- bcs->chstate |= CHS_D_UP;
- gigaset_i4l_channel_cmd(bcs, ISDN_STAT_DCONN);
- }
-
if (bcs->chstate & CHS_B_UP) {
dev_notice(bcs->cs->dev, "%s: B channel already up\n",
__func__);
diff --git a/drivers/isdn/gigaset/isocdata.c b/drivers/isdn/gigaset/isocdata.c
index db3a1e4..bed38fc 100644
--- a/drivers/isdn/gigaset/isocdata.c
+++ b/drivers/isdn/gigaset/isocdata.c
@@ -174,12 +174,6 @@
pr_err("invalid size %d\n", size);
return -EINVAL;
}
- src = iwb->read;
- if (unlikely(limit >= BAS_OUTBUFSIZE + BAS_OUTBUFPAD ||
- (read < src && limit >= src))) {
- pr_err("isoc write buffer frame reservation violated\n");
- return -EFAULT;
- }
#endif
if (read < write) {
diff --git a/drivers/isdn/hisax/hfc_usb.c b/drivers/isdn/hisax/hfc_usb.c
index 8df889b..9de5420 100644
--- a/drivers/isdn/hisax/hfc_usb.c
+++ b/drivers/isdn/hisax/hfc_usb.c
@@ -37,7 +37,6 @@
#include <linux/kernel_stat.h>
#include <linux/usb.h>
#include <linux/kernel.h>
-#include <linux/smp_lock.h>
#include <linux/sched.h>
#include <linux/moduleparam.h>
#include "hisax.h"
diff --git a/drivers/isdn/i4l/isdn_tty.c b/drivers/isdn/i4l/isdn_tty.c
index b4d4522..2881a66 100644
--- a/drivers/isdn/i4l/isdn_tty.c
+++ b/drivers/isdn/i4l/isdn_tty.c
@@ -13,6 +13,7 @@
#include <linux/isdn.h>
#include <linux/delay.h>
+#include <linux/smp_lock.h>
#include "isdn_common.h"
#include "isdn_tty.h"
#ifdef CONFIG_ISDN_AUDIO
diff --git a/drivers/isdn/mISDN/stack.c b/drivers/isdn/mISDN/stack.c
index e2f4501..3e1532a 100644
--- a/drivers/isdn/mISDN/stack.c
+++ b/drivers/isdn/mISDN/stack.c
@@ -17,6 +17,7 @@
#include <linux/mISDNif.h>
#include <linux/kthread.h>
+#include <linux/smp_lock.h>
#include "core.h"
static u_int *debug;
diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
index 9b60b6b..7c8e7122a 100644
--- a/drivers/leds/Kconfig
+++ b/drivers/leds/Kconfig
@@ -75,6 +75,7 @@
depends on LEDS_CLASS && X86 && EXPERIMENTAL
help
This option enables support for the PCEngines ALIX.2 and ALIX.3 LEDs.
+ You have to set leds-alix2.force=1 for boards with Award BIOS.
config LEDS_H1940
tristate "LED Support for iPAQ H1940 device"
@@ -145,15 +146,16 @@
of_platform devices. For instance, LEDs which are listed in a "dts"
file.
-config LEDS_LP5521
- tristate "LED Support for the LP5521 LEDs"
+config LEDS_LP3944
+ tristate "LED Support for N.S. LP3944 (Fun Light) I2C chip"
depends on LEDS_CLASS && I2C
help
- If you say 'Y' here you get support for the National Semiconductor
- LP5521 LED driver used in n8x0 boards.
+ This option enables support for LEDs connected to the National
+ Semiconductor LP3944 Lighting Management Unit (LMU) also known as
+ Fun Light Chip.
- This driver can be built as a module by choosing 'M'. The module
- will be called leds-lp5521.
+ To compile this driver as a module, choose M here: the
+ module will be called leds-lp3944.
config LEDS_CLEVO_MAIL
tristate "Mail LED on Clevo notebook"
diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile
index 2d41c4d..e8cdcf7 100644
--- a/drivers/leds/Makefile
+++ b/drivers/leds/Makefile
@@ -20,6 +20,7 @@
obj-$(CONFIG_LEDS_SUNFIRE) += leds-sunfire.o
obj-$(CONFIG_LEDS_PCA9532) += leds-pca9532.o
obj-$(CONFIG_LEDS_GPIO) += leds-gpio.o
+obj-$(CONFIG_LEDS_LP3944) += leds-lp3944.o
obj-$(CONFIG_LEDS_CLEVO_MAIL) += leds-clevo-mail.o
obj-$(CONFIG_LEDS_HP6XX) += leds-hp6xx.o
obj-$(CONFIG_LEDS_FSG) += leds-fsg.o
diff --git a/drivers/leds/leds-alix2.c b/drivers/leds/leds-alix2.c
index ddbd773..731d4ee 100644
--- a/drivers/leds/leds-alix2.c
+++ b/drivers/leds/leds-alix2.c
@@ -14,7 +14,7 @@
static int force = 0;
module_param(force, bool, 0444);
-MODULE_PARM_DESC(force, "Assume system has ALIX.2 style LEDs");
+MODULE_PARM_DESC(force, "Assume system has ALIX.2/ALIX.3 style LEDs");
struct alix_led {
struct led_classdev cdev;
@@ -155,6 +155,11 @@
goto out;
}
+ /* enable output on GPIO for LED 1,2,3 */
+ outl(1 << 6, 0x6104);
+ outl(1 << 9, 0x6184);
+ outl(1 << 11, 0x6184);
+
pdev = platform_device_register_simple(KBUILD_MODNAME, -1, NULL, 0);
if (!IS_ERR(pdev)) {
ret = platform_driver_probe(&alix_led_driver, alix_led_probe);
diff --git a/drivers/leds/leds-bd2802.c b/drivers/leds/leds-bd2802.c
index 4149ecb..779d7f2 100644
--- a/drivers/leds/leds-bd2802.c
+++ b/drivers/leds/leds-bd2802.c
@@ -97,6 +97,10 @@
enum led_ids led_id;
enum led_colors color;
enum led_bits state;
+
+ /* General attributes of RGB LEDs */
+ int wave_pattern;
+ int rgb_current;
};
@@ -254,7 +258,7 @@
bd2802_reset_cancel(led);
reg = bd2802_get_reg_addr(id, color, BD2802_REG_CURRENT1SETUP);
- bd2802_write_byte(led->client, reg, BD2802_CURRENT_032);
+ bd2802_write_byte(led->client, reg, led->rgb_current);
reg = bd2802_get_reg_addr(id, color, BD2802_REG_CURRENT2SETUP);
bd2802_write_byte(led->client, reg, BD2802_CURRENT_000);
reg = bd2802_get_reg_addr(id, color, BD2802_REG_WAVEPATTERN);
@@ -275,9 +279,9 @@
reg = bd2802_get_reg_addr(id, color, BD2802_REG_CURRENT1SETUP);
bd2802_write_byte(led->client, reg, BD2802_CURRENT_000);
reg = bd2802_get_reg_addr(id, color, BD2802_REG_CURRENT2SETUP);
- bd2802_write_byte(led->client, reg, BD2802_CURRENT_032);
+ bd2802_write_byte(led->client, reg, led->rgb_current);
reg = bd2802_get_reg_addr(id, color, BD2802_REG_WAVEPATTERN);
- bd2802_write_byte(led->client, reg, BD2802_PATTERN_HALF);
+ bd2802_write_byte(led->client, reg, led->wave_pattern);
bd2802_enable(led, id);
bd2802_update_state(led, id, color, BD2802_BLINK);
@@ -406,7 +410,7 @@
ret = device_create_file(&led->client->dev,
bd2802_addr_attributes[i]);
if (ret) {
- dev_err(&led->client->dev, "failed to sysfs file %s\n",
+ dev_err(&led->client->dev, "failed: sysfs file %s\n",
bd2802_addr_attributes[i]->attr.name);
goto failed_remove_files;
}
@@ -483,6 +487,52 @@
.store = bd2802_store_adv_conf,
};
+#define BD2802_CONTROL_ATTR(attr_name, name_str) \
+static ssize_t bd2802_show_##attr_name(struct device *dev, \
+ struct device_attribute *attr, char *buf) \
+{ \
+ struct bd2802_led *led = i2c_get_clientdata(to_i2c_client(dev));\
+ ssize_t ret; \
+ down_read(&led->rwsem); \
+ ret = sprintf(buf, "0x%02x\n", led->attr_name); \
+ up_read(&led->rwsem); \
+ return ret; \
+} \
+static ssize_t bd2802_store_##attr_name(struct device *dev, \
+ struct device_attribute *attr, const char *buf, size_t count) \
+{ \
+ struct bd2802_led *led = i2c_get_clientdata(to_i2c_client(dev));\
+ unsigned long val; \
+ int ret; \
+ if (!count) \
+ return -EINVAL; \
+ ret = strict_strtoul(buf, 16, &val); \
+ if (ret) \
+ return ret; \
+ down_write(&led->rwsem); \
+ led->attr_name = val; \
+ up_write(&led->rwsem); \
+ return count; \
+} \
+static struct device_attribute bd2802_##attr_name##_attr = { \
+ .attr = { \
+ .name = name_str, \
+ .mode = 0644, \
+ .owner = THIS_MODULE \
+ }, \
+ .show = bd2802_show_##attr_name, \
+ .store = bd2802_store_##attr_name, \
+};
+
+BD2802_CONTROL_ATTR(wave_pattern, "wave_pattern");
+BD2802_CONTROL_ATTR(rgb_current, "rgb_current");
+
+static struct device_attribute *bd2802_attributes[] = {
+ &bd2802_adv_conf_attr,
+ &bd2802_wave_pattern_attr,
+ &bd2802_rgb_current_attr,
+};
+
static void bd2802_led_work(struct work_struct *work)
{
struct bd2802_led *led = container_of(work, struct bd2802_led, work);
@@ -538,7 +588,6 @@
led->cdev_led1r.brightness = LED_OFF;
led->cdev_led1r.brightness_set = bd2802_set_led1r_brightness;
led->cdev_led1r.blink_set = bd2802_set_led1r_blink;
- led->cdev_led1r.flags |= LED_CORE_SUSPENDRESUME;
ret = led_classdev_register(&led->client->dev, &led->cdev_led1r);
if (ret < 0) {
@@ -551,7 +600,6 @@
led->cdev_led1g.brightness = LED_OFF;
led->cdev_led1g.brightness_set = bd2802_set_led1g_brightness;
led->cdev_led1g.blink_set = bd2802_set_led1g_blink;
- led->cdev_led1g.flags |= LED_CORE_SUSPENDRESUME;
ret = led_classdev_register(&led->client->dev, &led->cdev_led1g);
if (ret < 0) {
@@ -564,7 +612,6 @@
led->cdev_led1b.brightness = LED_OFF;
led->cdev_led1b.brightness_set = bd2802_set_led1b_brightness;
led->cdev_led1b.blink_set = bd2802_set_led1b_blink;
- led->cdev_led1b.flags |= LED_CORE_SUSPENDRESUME;
ret = led_classdev_register(&led->client->dev, &led->cdev_led1b);
if (ret < 0) {
@@ -577,7 +624,6 @@
led->cdev_led2r.brightness = LED_OFF;
led->cdev_led2r.brightness_set = bd2802_set_led2r_brightness;
led->cdev_led2r.blink_set = bd2802_set_led2r_blink;
- led->cdev_led2r.flags |= LED_CORE_SUSPENDRESUME;
ret = led_classdev_register(&led->client->dev, &led->cdev_led2r);
if (ret < 0) {
@@ -590,7 +636,6 @@
led->cdev_led2g.brightness = LED_OFF;
led->cdev_led2g.brightness_set = bd2802_set_led2g_brightness;
led->cdev_led2g.blink_set = bd2802_set_led2g_blink;
- led->cdev_led2g.flags |= LED_CORE_SUSPENDRESUME;
ret = led_classdev_register(&led->client->dev, &led->cdev_led2g);
if (ret < 0) {
@@ -640,7 +685,7 @@
{
struct bd2802_led *led;
struct bd2802_led_platform_data *pdata;
- int ret;
+ int ret, i;
led = kzalloc(sizeof(struct bd2802_led), GFP_KERNEL);
if (!led) {
@@ -670,13 +715,20 @@
/* To save the power, reset BD2802 after detecting */
gpio_set_value(led->pdata->reset_gpio, 0);
+ /* Default attributes */
+ led->wave_pattern = BD2802_PATTERN_HALF;
+ led->rgb_current = BD2802_CURRENT_032;
+
init_rwsem(&led->rwsem);
- ret = device_create_file(&client->dev, &bd2802_adv_conf_attr);
- if (ret) {
- dev_err(&client->dev, "failed to create sysfs file %s\n",
- bd2802_adv_conf_attr.attr.name);
- goto failed_free;
+ for (i = 0; i < ARRAY_SIZE(bd2802_attributes); i++) {
+ ret = device_create_file(&led->client->dev,
+ bd2802_attributes[i]);
+ if (ret) {
+ dev_err(&led->client->dev, "failed: sysfs file %s\n",
+ bd2802_attributes[i]->attr.name);
+ goto failed_unregister_dev_file;
+ }
}
ret = bd2802_register_led_classdev(led);
@@ -686,7 +738,8 @@
return 0;
failed_unregister_dev_file:
- device_remove_file(&client->dev, &bd2802_adv_conf_attr);
+ for (i--; i >= 0; i--)
+ device_remove_file(&led->client->dev, bd2802_attributes[i]);
failed_free:
i2c_set_clientdata(client, NULL);
kfree(led);
@@ -697,12 +750,14 @@
static int __exit bd2802_remove(struct i2c_client *client)
{
struct bd2802_led *led = i2c_get_clientdata(client);
+ int i;
- bd2802_unregister_led_classdev(led);
gpio_set_value(led->pdata->reset_gpio, 0);
+ bd2802_unregister_led_classdev(led);
if (led->adf_on)
bd2802_disable_adv_conf(led);
- device_remove_file(&client->dev, &bd2802_adv_conf_attr);
+ for (i = 0; i < ARRAY_SIZE(bd2802_attributes); i++)
+ device_remove_file(&led->client->dev, bd2802_attributes[i]);
i2c_set_clientdata(client, NULL);
kfree(led);
@@ -723,8 +778,7 @@
struct bd2802_led *led = i2c_get_clientdata(client);
if (!bd2802_is_all_off(led) || led->adf_on) {
- gpio_set_value(led->pdata->reset_gpio, 1);
- udelay(100);
+ bd2802_reset_cancel(led);
bd2802_restore_state(led);
}
@@ -762,4 +816,4 @@
MODULE_AUTHOR("Kim Kyuwon <q1.kim@samsung.com>");
MODULE_DESCRIPTION("BD2802 LED driver");
-MODULE_LICENSE("GPL");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/leds/leds-cobalt-raq.c b/drivers/leds/leds-cobalt-raq.c
index ff0e8c3..5f1ce81 100644
--- a/drivers/leds/leds-cobalt-raq.c
+++ b/drivers/leds/leds-cobalt-raq.c
@@ -1,7 +1,7 @@
/*
* LEDs driver for the Cobalt Raq series.
*
- * Copyright (C) 2007 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ * Copyright (C) 2007 Yoichi Yuasa <yuasa@linux-mips.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
diff --git a/drivers/leds/leds-gpio.c b/drivers/leds/leds-gpio.c
index d210905..6b06638 100644
--- a/drivers/leds/leds-gpio.c
+++ b/drivers/leds/leds-gpio.c
@@ -76,7 +76,7 @@
struct gpio_led_data *led_dat, struct device *parent,
int (*blink_set)(unsigned, unsigned long *, unsigned long *))
{
- int ret;
+ int ret, state;
/* skip leds that aren't available */
if (!gpio_is_valid(template->gpio)) {
@@ -99,11 +99,15 @@
led_dat->cdev.blink_set = gpio_blink_set;
}
led_dat->cdev.brightness_set = gpio_led_set;
- led_dat->cdev.brightness = LED_OFF;
+ if (template->default_state == LEDS_GPIO_DEFSTATE_KEEP)
+ state = !!gpio_get_value(led_dat->gpio) ^ led_dat->active_low;
+ else
+ state = (template->default_state == LEDS_GPIO_DEFSTATE_ON);
+ led_dat->cdev.brightness = state ? LED_FULL : LED_OFF;
if (!template->retain_state_suspended)
led_dat->cdev.flags |= LED_CORE_SUSPENDRESUME;
- ret = gpio_direction_output(led_dat->gpio, led_dat->active_low);
+ ret = gpio_direction_output(led_dat->gpio, led_dat->active_low ^ state);
if (ret < 0)
goto err;
@@ -129,7 +133,7 @@
}
#ifdef CONFIG_LEDS_GPIO_PLATFORM
-static int gpio_led_probe(struct platform_device *pdev)
+static int __devinit gpio_led_probe(struct platform_device *pdev)
{
struct gpio_led_platform_data *pdata = pdev->dev.platform_data;
struct gpio_led_data *leds_data;
@@ -223,12 +227,22 @@
memset(&led, 0, sizeof(led));
for_each_child_of_node(np, child) {
enum of_gpio_flags flags;
+ const char *state;
led.gpio = of_get_gpio_flags(child, 0, &flags);
led.active_low = flags & OF_GPIO_ACTIVE_LOW;
led.name = of_get_property(child, "label", NULL) ? : child->name;
led.default_trigger =
of_get_property(child, "linux,default-trigger", NULL);
+ state = of_get_property(child, "default-state", NULL);
+ if (state) {
+ if (!strcmp(state, "keep"))
+ led.default_state = LEDS_GPIO_DEFSTATE_KEEP;
+ else if(!strcmp(state, "on"))
+ led.default_state = LEDS_GPIO_DEFSTATE_ON;
+ else
+ led.default_state = LEDS_GPIO_DEFSTATE_OFF;
+ }
ret = create_gpio_led(&led, &pdata->led_data[pdata->num_leds++],
&ofdev->dev, NULL);
diff --git a/drivers/leds/leds-lp3944.c b/drivers/leds/leds-lp3944.c
new file mode 100644
index 0000000..5946208
--- /dev/null
+++ b/drivers/leds/leds-lp3944.c
@@ -0,0 +1,466 @@
+/*
+ * leds-lp3944.c - driver for National Semiconductor LP3944 Funlight Chip
+ *
+ * Copyright (C) 2009 Antonio Ospite <ospite@studenti.unina.it>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+/*
+ * I2C driver for National Semiconductor LP3944 Funlight Chip
+ * http://www.national.com/pf/LP/LP3944.html
+ *
+ * This helper chip can drive up to 8 leds, with two programmable DIM modes;
+ * it could even be used as a gpio expander but this driver assumes it is used
+ * as a led controller.
+ *
+ * The DIM modes are used to set _blink_ patterns for leds, the pattern is
+ * specified supplying two parameters:
+ * - period: from 0s to 1.6s
+ * - duty cycle: percentage of the period the led is on, from 0 to 100
+ *
+ * LP3944 can be found on Motorola A910 smartphone, where it drives the rgb
+ * leds, the camera flash light and the displays backlights.
+ */
+
+#include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/leds.h>
+#include <linux/mutex.h>
+#include <linux/workqueue.h>
+#include <linux/leds-lp3944.h>
+
+/* Read Only Registers */
+#define LP3944_REG_INPUT1 0x00 /* LEDs 0-7 InputRegister (Read Only) */
+#define LP3944_REG_REGISTER1 0x01 /* None (Read Only) */
+
+#define LP3944_REG_PSC0 0x02 /* Frequency Prescaler 0 (R/W) */
+#define LP3944_REG_PWM0 0x03 /* PWM Register 0 (R/W) */
+#define LP3944_REG_PSC1 0x04 /* Frequency Prescaler 1 (R/W) */
+#define LP3944_REG_PWM1 0x05 /* PWM Register 1 (R/W) */
+#define LP3944_REG_LS0 0x06 /* LEDs 0-3 Selector (R/W) */
+#define LP3944_REG_LS1 0x07 /* LEDs 4-7 Selector (R/W) */
+
+/* These registers are not used to control leds in LP3944, they can store
+ * arbitrary values which the chip will ignore.
+ */
+#define LP3944_REG_REGISTER8 0x08
+#define LP3944_REG_REGISTER9 0x09
+
+#define LP3944_DIM0 0
+#define LP3944_DIM1 1
+
+/* period in ms */
+#define LP3944_PERIOD_MIN 0
+#define LP3944_PERIOD_MAX 1600
+
+/* duty cycle is a percentage */
+#define LP3944_DUTY_CYCLE_MIN 0
+#define LP3944_DUTY_CYCLE_MAX 100
+
+#define ldev_to_led(c) container_of(c, struct lp3944_led_data, ldev)
+
+/* Saved data */
+struct lp3944_led_data {
+ u8 id;
+ enum lp3944_type type;
+ enum lp3944_status status;
+ struct led_classdev ldev;
+ struct i2c_client *client;
+ struct work_struct work;
+};
+
+struct lp3944_data {
+ struct mutex lock;
+ struct i2c_client *client;
+ struct lp3944_led_data leds[LP3944_LEDS_MAX];
+};
+
+static int lp3944_reg_read(struct i2c_client *client, u8 reg, u8 *value)
+{
+ int tmp;
+
+ tmp = i2c_smbus_read_byte_data(client, reg);
+ if (tmp < 0)
+ return -EINVAL;
+
+ *value = tmp;
+
+ return 0;
+}
+
+static int lp3944_reg_write(struct i2c_client *client, u8 reg, u8 value)
+{
+ return i2c_smbus_write_byte_data(client, reg, value);
+}
+
+/**
+ * Set the period for DIM status
+ *
+ * @client: the i2c client
+ * @dim: either LP3944_DIM0 or LP3944_DIM1
+ * @period: period of a blink, that is a on/off cycle, expressed in ms.
+ */
+static int lp3944_dim_set_period(struct i2c_client *client, u8 dim, u16 period)
+{
+ u8 psc_reg;
+ u8 psc_value;
+ int err;
+
+ if (dim == LP3944_DIM0)
+ psc_reg = LP3944_REG_PSC0;
+ else if (dim == LP3944_DIM1)
+ psc_reg = LP3944_REG_PSC1;
+ else
+ return -EINVAL;
+
+ /* Convert period to Prescaler value */
+ if (period > LP3944_PERIOD_MAX)
+ return -EINVAL;
+
+ psc_value = (period * 255) / LP3944_PERIOD_MAX;
+
+ err = lp3944_reg_write(client, psc_reg, psc_value);
+
+ return err;
+}
+
+/**
+ * Set the duty cycle for DIM status
+ *
+ * @client: the i2c client
+ * @dim: either LP3944_DIM0 or LP3944_DIM1
+ * @duty_cycle: percentage of a period during which a led is ON
+ */
+static int lp3944_dim_set_dutycycle(struct i2c_client *client, u8 dim,
+ u8 duty_cycle)
+{
+ u8 pwm_reg;
+ u8 pwm_value;
+ int err;
+
+ if (dim == LP3944_DIM0)
+ pwm_reg = LP3944_REG_PWM0;
+ else if (dim == LP3944_DIM1)
+ pwm_reg = LP3944_REG_PWM1;
+ else
+ return -EINVAL;
+
+ /* Convert duty cycle to PWM value */
+ if (duty_cycle > LP3944_DUTY_CYCLE_MAX)
+ return -EINVAL;
+
+ pwm_value = (duty_cycle * 255) / LP3944_DUTY_CYCLE_MAX;
+
+ err = lp3944_reg_write(client, pwm_reg, pwm_value);
+
+ return err;
+}
+
+/**
+ * Set the led status
+ *
+ * @led: a lp3944_led_data structure
+ * @status: one of LP3944_LED_STATUS_OFF
+ * LP3944_LED_STATUS_ON
+ * LP3944_LED_STATUS_DIM0
+ * LP3944_LED_STATUS_DIM1
+ */
+static int lp3944_led_set(struct lp3944_led_data *led, u8 status)
+{
+ struct lp3944_data *data = i2c_get_clientdata(led->client);
+ u8 id = led->id;
+ u8 reg;
+ u8 val = 0;
+ int err;
+
+ dev_dbg(&led->client->dev, "%s: %s, status before normalization:%d\n",
+ __func__, led->ldev.name, status);
+
+ switch (id) {
+ case LP3944_LED0:
+ case LP3944_LED1:
+ case LP3944_LED2:
+ case LP3944_LED3:
+ reg = LP3944_REG_LS0;
+ break;
+ case LP3944_LED4:
+ case LP3944_LED5:
+ case LP3944_LED6:
+ case LP3944_LED7:
+ id -= LP3944_LED4;
+ reg = LP3944_REG_LS1;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ if (status > LP3944_LED_STATUS_DIM1)
+ return -EINVAL;
+
+ /* invert only 0 and 1, leave unchanged the other values,
+ * remember we are abusing status to set blink patterns
+ */
+ if (led->type == LP3944_LED_TYPE_LED_INVERTED && status < 2)
+ status = 1 - status;
+
+ mutex_lock(&data->lock);
+ lp3944_reg_read(led->client, reg, &val);
+
+ val &= ~(LP3944_LED_STATUS_MASK << (id << 1));
+ val |= (status << (id << 1));
+
+ dev_dbg(&led->client->dev, "%s: %s, reg:%d id:%d status:%d val:%#x\n",
+ __func__, led->ldev.name, reg, id, status, val);
+
+ /* set led status */
+ err = lp3944_reg_write(led->client, reg, val);
+ mutex_unlock(&data->lock);
+
+ return err;
+}
+
+static int lp3944_led_set_blink(struct led_classdev *led_cdev,
+ unsigned long *delay_on,
+ unsigned long *delay_off)
+{
+ struct lp3944_led_data *led = ldev_to_led(led_cdev);
+ u16 period;
+ u8 duty_cycle;
+ int err;
+
+ /* units are in ms */
+ if (*delay_on + *delay_off > LP3944_PERIOD_MAX)
+ return -EINVAL;
+
+ if (*delay_on == 0 && *delay_off == 0) {
+ /* Special case: the leds subsystem requires a default user
+ * friendly blink pattern for the LED. Let's blink the led
+ * slowly (1Hz).
+ */
+ *delay_on = 500;
+ *delay_off = 500;
+ }
+
+ period = (*delay_on) + (*delay_off);
+
+ /* duty_cycle is the percentage of period during which the led is ON */
+ duty_cycle = 100 * (*delay_on) / period;
+
+ /* invert duty cycle for inverted leds, this has the same effect of
+ * swapping delay_on and delay_off
+ */
+ if (led->type == LP3944_LED_TYPE_LED_INVERTED)
+ duty_cycle = 100 - duty_cycle;
+
+ /* NOTE: using always the first DIM mode, this means that all leds
+ * will have the same blinking pattern.
+ *
+ * We could find a way later to have two leds blinking in hardware
+ * with different patterns at the same time, falling back to software
+ * control for the other ones.
+ */
+ err = lp3944_dim_set_period(led->client, LP3944_DIM0, period);
+ if (err)
+ return err;
+
+ err = lp3944_dim_set_dutycycle(led->client, LP3944_DIM0, duty_cycle);
+ if (err)
+ return err;
+
+ dev_dbg(&led->client->dev, "%s: OK hardware accelerated blink!\n",
+ __func__);
+
+ led->status = LP3944_LED_STATUS_DIM0;
+ schedule_work(&led->work);
+
+ return 0;
+}
+
+static void lp3944_led_set_brightness(struct led_classdev *led_cdev,
+ enum led_brightness brightness)
+{
+ struct lp3944_led_data *led = ldev_to_led(led_cdev);
+
+ dev_dbg(&led->client->dev, "%s: %s, %d\n",
+ __func__, led_cdev->name, brightness);
+
+ led->status = brightness;
+ schedule_work(&led->work);
+}
+
+static void lp3944_led_work(struct work_struct *work)
+{
+ struct lp3944_led_data *led;
+
+ led = container_of(work, struct lp3944_led_data, work);
+ lp3944_led_set(led, led->status);
+}
+
+static int lp3944_configure(struct i2c_client *client,
+ struct lp3944_data *data,
+ struct lp3944_platform_data *pdata)
+{
+ int i, err = 0;
+
+ for (i = 0; i < pdata->leds_size; i++) {
+ struct lp3944_led *pled = &pdata->leds[i];
+ struct lp3944_led_data *led = &data->leds[i];
+ led->client = client;
+ led->id = i;
+
+ switch (pled->type) {
+
+ case LP3944_LED_TYPE_LED:
+ case LP3944_LED_TYPE_LED_INVERTED:
+ led->type = pled->type;
+ led->status = pled->status;
+ led->ldev.name = pled->name;
+ led->ldev.max_brightness = 1;
+ led->ldev.brightness_set = lp3944_led_set_brightness;
+ led->ldev.blink_set = lp3944_led_set_blink;
+ led->ldev.flags = LED_CORE_SUSPENDRESUME;
+
+ INIT_WORK(&led->work, lp3944_led_work);
+ err = led_classdev_register(&client->dev, &led->ldev);
+ if (err < 0) {
+ dev_err(&client->dev,
+ "couldn't register LED %s\n",
+ led->ldev.name);
+ goto exit;
+ }
+
+ /* to expose the default value to userspace */
+ led->ldev.brightness = led->status;
+
+ /* Set the default led status */
+ err = lp3944_led_set(led, led->status);
+ if (err < 0) {
+ dev_err(&client->dev,
+ "%s couldn't set STATUS %d\n",
+ led->ldev.name, led->status);
+ goto exit;
+ }
+ break;
+
+ case LP3944_LED_TYPE_NONE:
+ default:
+ break;
+
+ }
+ }
+ return 0;
+
+exit:
+ if (i > 0)
+ for (i = i - 1; i >= 0; i--)
+ switch (pdata->leds[i].type) {
+
+ case LP3944_LED_TYPE_LED:
+ case LP3944_LED_TYPE_LED_INVERTED:
+ led_classdev_unregister(&data->leds[i].ldev);
+ cancel_work_sync(&data->leds[i].work);
+ break;
+
+ case LP3944_LED_TYPE_NONE:
+ default:
+ break;
+ }
+
+ return err;
+}
+
+static int __devinit lp3944_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct lp3944_platform_data *lp3944_pdata = client->dev.platform_data;
+ struct lp3944_data *data;
+
+ if (lp3944_pdata == NULL) {
+ dev_err(&client->dev, "no platform data\n");
+ return -EINVAL;
+ }
+
+ /* Let's see whether this adapter can support what we need. */
+ if (!i2c_check_functionality(client->adapter,
+ I2C_FUNC_SMBUS_BYTE_DATA)) {
+ dev_err(&client->dev, "insufficient functionality!\n");
+ return -ENODEV;
+ }
+
+ data = kzalloc(sizeof(struct lp3944_data), GFP_KERNEL);
+ if (!data)
+ return -ENOMEM;
+
+ data->client = client;
+ i2c_set_clientdata(client, data);
+
+ mutex_init(&data->lock);
+
+ dev_info(&client->dev, "lp3944 enabled\n");
+
+ lp3944_configure(client, data, lp3944_pdata);
+ return 0;
+}
+
+static int __devexit lp3944_remove(struct i2c_client *client)
+{
+ struct lp3944_platform_data *pdata = client->dev.platform_data;
+ struct lp3944_data *data = i2c_get_clientdata(client);
+ int i;
+
+ for (i = 0; i < pdata->leds_size; i++)
+ switch (data->leds[i].type) {
+ case LP3944_LED_TYPE_LED:
+ case LP3944_LED_TYPE_LED_INVERTED:
+ led_classdev_unregister(&data->leds[i].ldev);
+ cancel_work_sync(&data->leds[i].work);
+ break;
+
+ case LP3944_LED_TYPE_NONE:
+ default:
+ break;
+ }
+
+ kfree(data);
+ i2c_set_clientdata(client, NULL);
+
+ return 0;
+}
+
+/* lp3944 i2c driver struct */
+static const struct i2c_device_id lp3944_id[] = {
+ {"lp3944", 0},
+ {}
+};
+
+MODULE_DEVICE_TABLE(i2c, lp3944_id);
+
+static struct i2c_driver lp3944_driver = {
+ .driver = {
+ .name = "lp3944",
+ },
+ .probe = lp3944_probe,
+ .remove = __devexit_p(lp3944_remove),
+ .id_table = lp3944_id,
+};
+
+static int __init lp3944_module_init(void)
+{
+ return i2c_add_driver(&lp3944_driver);
+}
+
+static void __exit lp3944_module_exit(void)
+{
+ i2c_del_driver(&lp3944_driver);
+}
+
+module_init(lp3944_module_init);
+module_exit(lp3944_module_exit);
+
+MODULE_AUTHOR("Antonio Ospite <ospite@studenti.unina.it>");
+MODULE_DESCRIPTION("LP3944 Fun Light Chip");
+MODULE_LICENSE("GPL");
diff --git a/drivers/leds/leds-pca9532.c b/drivers/leds/leds-pca9532.c
index 3937244..dba8921 100644
--- a/drivers/leds/leds-pca9532.c
+++ b/drivers/leds/leds-pca9532.c
@@ -35,7 +35,7 @@
struct pca9532_led leds[16];
struct mutex update_lock;
struct input_dev *idev;
- struct work_struct work;
+ struct work_struct work;
u8 pwm[2];
u8 psc[2];
};
@@ -87,14 +87,14 @@
if (b > 0xFF)
return -EINVAL;
data->pwm[pwm] = b;
- data->psc[pwm] = blink;
- return 0;
+ data->psc[pwm] = blink;
+ return 0;
}
static int pca9532_setpwm(struct i2c_client *client, int pwm)
{
- struct pca9532_data *data = i2c_get_clientdata(client);
- mutex_lock(&data->update_lock);
+ struct pca9532_data *data = i2c_get_clientdata(client);
+ mutex_lock(&data->update_lock);
i2c_smbus_write_byte_data(client, PCA9532_REG_PWM(pwm),
data->pwm[pwm]);
i2c_smbus_write_byte_data(client, PCA9532_REG_PSC(pwm),
@@ -132,11 +132,11 @@
led->state = PCA9532_ON;
else {
led->state = PCA9532_PWM0; /* Thecus: hardcode one pwm */
- err = pca9532_calcpwm(led->client, 0, 0, value);
+ err = pca9532_calcpwm(led->client, 0, 0, value);
if (err)
return; /* XXX: led api doesn't allow error code? */
}
- schedule_work(&led->work);
+ schedule_work(&led->work);
}
static int pca9532_set_blink(struct led_classdev *led_cdev,
@@ -145,7 +145,7 @@
struct pca9532_led *led = ldev_to_led(led_cdev);
struct i2c_client *client = led->client;
int psc;
- int err = 0;
+ int err = 0;
if (*delay_on == 0 && *delay_off == 0) {
/* led subsystem ask us for a blink rate */
@@ -157,11 +157,11 @@
/* Thecus specific: only use PSC/PWM 0 */
psc = (*delay_on * 152-1)/1000;
- err = pca9532_calcpwm(client, 0, psc, led_cdev->brightness);
- if (err)
- return err;
- schedule_work(&led->work);
- return 0;
+ err = pca9532_calcpwm(client, 0, psc, led_cdev->brightness);
+ if (err)
+ return err;
+ schedule_work(&led->work);
+ return 0;
}
static int pca9532_event(struct input_dev *dev, unsigned int type,
@@ -178,15 +178,15 @@
else
data->pwm[1] = 0;
- schedule_work(&data->work);
+ schedule_work(&data->work);
- return 0;
+ return 0;
}
static void pca9532_input_work(struct work_struct *work)
{
- struct pca9532_data *data;
- data = container_of(work, struct pca9532_data, work);
+ struct pca9532_data *data;
+ data = container_of(work, struct pca9532_data, work);
mutex_lock(&data->update_lock);
i2c_smbus_write_byte_data(data->client, PCA9532_REG_PWM(1),
data->pwm[1]);
@@ -195,11 +195,11 @@
static void pca9532_led_work(struct work_struct *work)
{
- struct pca9532_led *led;
- led = container_of(work, struct pca9532_led, work);
- if (led->state == PCA9532_PWM0)
- pca9532_setpwm(led->client, 0);
- pca9532_setled(led);
+ struct pca9532_led *led;
+ led = container_of(work, struct pca9532_led, work);
+ if (led->state == PCA9532_PWM0)
+ pca9532_setpwm(led->client, 0);
+ pca9532_setled(led);
}
static int pca9532_configure(struct i2c_client *client,
@@ -232,7 +232,7 @@
led->ldev.brightness = LED_OFF;
led->ldev.brightness_set = pca9532_set_brightness;
led->ldev.blink_set = pca9532_set_blink;
- INIT_WORK(&led->work, pca9532_led_work);
+ INIT_WORK(&led->work, pca9532_led_work);
err = led_classdev_register(&client->dev, &led->ldev);
if (err < 0) {
dev_err(&client->dev,
@@ -262,11 +262,11 @@
BIT_MASK(SND_TONE);
data->idev->event = pca9532_event;
input_set_drvdata(data->idev, data);
- INIT_WORK(&data->work, pca9532_input_work);
+ INIT_WORK(&data->work, pca9532_input_work);
err = input_register_device(data->idev);
if (err) {
input_free_device(data->idev);
- cancel_work_sync(&data->work);
+ cancel_work_sync(&data->work);
data->idev = NULL;
goto exit;
}
@@ -283,13 +283,13 @@
break;
case PCA9532_TYPE_LED:
led_classdev_unregister(&data->leds[i].ldev);
- cancel_work_sync(&data->leds[i].work);
+ cancel_work_sync(&data->leds[i].work);
break;
case PCA9532_TYPE_N2100_BEEP:
if (data->idev != NULL) {
input_unregister_device(data->idev);
input_free_device(data->idev);
- cancel_work_sync(&data->work);
+ cancel_work_sync(&data->work);
data->idev = NULL;
}
break;
@@ -340,13 +340,13 @@
break;
case PCA9532_TYPE_LED:
led_classdev_unregister(&data->leds[i].ldev);
- cancel_work_sync(&data->leds[i].work);
+ cancel_work_sync(&data->leds[i].work);
break;
case PCA9532_TYPE_N2100_BEEP:
if (data->idev != NULL) {
input_unregister_device(data->idev);
input_free_device(data->idev);
- cancel_work_sync(&data->work);
+ cancel_work_sync(&data->work);
data->idev = NULL;
}
break;
diff --git a/drivers/lguest/lg.h b/drivers/lguest/lg.h
index d4e8979..9c31382 100644
--- a/drivers/lguest/lg.h
+++ b/drivers/lguest/lg.h
@@ -82,7 +82,7 @@
struct lg_eventfd {
unsigned long addr;
- struct file *event;
+ struct eventfd_ctx *event;
};
struct lg_eventfd_map {
diff --git a/drivers/lguest/lguest_user.c b/drivers/lguest/lguest_user.c
index 32e2971..9f9a295 100644
--- a/drivers/lguest/lguest_user.c
+++ b/drivers/lguest/lguest_user.c
@@ -50,7 +50,7 @@
/* Now append new entry. */
new->map[new->num].addr = addr;
- new->map[new->num].event = eventfd_fget(fd);
+ new->map[new->num].event = eventfd_ctx_fdget(fd);
if (IS_ERR(new->map[new->num].event)) {
kfree(new);
return PTR_ERR(new->map[new->num].event);
@@ -357,7 +357,7 @@
/* Release any eventfds they registered. */
for (i = 0; i < lg->eventfds->num; i++)
- fput(lg->eventfds->map[i].event);
+ eventfd_ctx_put(lg->eventfds->map[i].event);
kfree(lg->eventfds);
/* If lg->dead doesn't contain an error code it will be NULL or a
diff --git a/drivers/macintosh/macio_asic.c b/drivers/macintosh/macio_asic.c
index 6e149f4..a0f6838 100644
--- a/drivers/macintosh/macio_asic.c
+++ b/drivers/macintosh/macio_asic.c
@@ -378,6 +378,17 @@
dev->ofdev.dev.bus = &macio_bus_type;
dev->ofdev.dev.release = macio_release_dev;
+#ifdef CONFIG_PCI
+ /* Set the DMA ops to the ones from the PCI device, this could be
+ * fishy if we didn't know that on PowerMac it's always direct ops
+ * or iommu ops that will work fine
+ */
+ dev->ofdev.dev.archdata.dma_ops =
+ chip->lbus.pdev->dev.archdata.dma_ops;
+ dev->ofdev.dev.archdata.dma_data =
+ chip->lbus.pdev->dev.archdata.dma_data;
+#endif /* CONFIG_PCI */
+
#ifdef DEBUG
printk("preparing mdev @%p, ofdev @%p, dev @%p, kobj @%p\n",
dev, &dev->ofdev, &dev->ofdev.dev, &dev->ofdev.dev.kobj);
diff --git a/drivers/md/dm-crypt.c b/drivers/md/dm-crypt.c
index 9933eb8..529e2ba 100644
--- a/drivers/md/dm-crypt.c
+++ b/drivers/md/dm-crypt.c
@@ -776,7 +776,7 @@
* But don't wait if split was due to the io size restriction
*/
if (unlikely(out_of_pages))
- congestion_wait(WRITE, HZ/100);
+ congestion_wait(BLK_RW_ASYNC, HZ/100);
/*
* With async crypto it is unsafe to share the crypto context
diff --git a/drivers/md/dm-exception-store.c b/drivers/md/dm-exception-store.c
index c3ae515..3710ff8 100644
--- a/drivers/md/dm-exception-store.c
+++ b/drivers/md/dm-exception-store.c
@@ -195,7 +195,7 @@
struct dm_exception_store **store)
{
int r = 0;
- struct dm_exception_store_type *type;
+ struct dm_exception_store_type *type = NULL;
struct dm_exception_store *tmp_store;
char persistent;
@@ -211,12 +211,15 @@
}
persistent = toupper(*argv[1]);
- if (persistent != 'P' && persistent != 'N') {
+ if (persistent == 'P')
+ type = get_type("P");
+ else if (persistent == 'N')
+ type = get_type("N");
+ else {
ti->error = "Persistent flag is not P or N";
return -EINVAL;
}
- type = get_type(&persistent);
if (!type) {
ti->error = "Exception store type not recognised";
r = -EINVAL;
diff --git a/drivers/md/dm-table.c b/drivers/md/dm-table.c
index 4899ebe..2cba557 100644
--- a/drivers/md/dm-table.c
+++ b/drivers/md/dm-table.c
@@ -495,7 +495,7 @@
return 0;
}
- if (blk_stack_limits(limits, &q->limits, start) < 0)
+ if (blk_stack_limits(limits, &q->limits, start << 9) < 0)
DMWARN("%s: target device %s is misaligned",
dm_device_name(ti->table->md), bdevname(bdev, b));
diff --git a/drivers/md/dm.c b/drivers/md/dm.c
index 3c6d4ee..9acd54a 100644
--- a/drivers/md/dm.c
+++ b/drivers/md/dm.c
@@ -1017,7 +1017,7 @@
clone->bi_flags |= 1 << BIO_CLONED;
if (bio_integrity(bio)) {
- bio_integrity_clone(clone, bio, GFP_NOIO);
+ bio_integrity_clone(clone, bio, GFP_NOIO, bs);
bio_integrity_trim(clone,
bio_sector_offset(bio, idx, offset), len);
}
@@ -1045,7 +1045,7 @@
clone->bi_flags &= ~(1 << BIO_SEG_VALID);
if (bio_integrity(bio)) {
- bio_integrity_clone(clone, bio, GFP_NOIO);
+ bio_integrity_clone(clone, bio, GFP_NOIO, bs);
if (idx != bio->bi_idx || clone->bi_size < bio->bi_size)
bio_integrity_trim(clone,
diff --git a/drivers/md/linear.c b/drivers/md/linear.c
index 15c8b7b..5810fa9 100644
--- a/drivers/md/linear.c
+++ b/drivers/md/linear.c
@@ -166,8 +166,8 @@
rdev->sectors = sectors * mddev->chunk_sectors;
}
- blk_queue_stack_limits(mddev->queue,
- rdev->bdev->bd_disk->queue);
+ disk_stack_limits(mddev->gendisk, rdev->bdev,
+ rdev->data_offset << 9);
/* as we don't honour merge_bvec_fn, we must never risk
* violating it, so limit ->max_sector to one PAGE, as
* a one page request is never in violation.
diff --git a/drivers/md/md.c b/drivers/md/md.c
index 09be637..d4351ff 100644
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -1756,9 +1756,10 @@
__u8 *uuid;
uuid = sb->set_uuid;
- printk(KERN_INFO "md: SB: (V:%u) (F:0x%08x) Array-ID:<%02x%02x%02x%02x"
- ":%02x%02x:%02x%02x:%02x%02x:%02x%02x%02x%02x%02x%02x>\n"
- KERN_INFO "md: Name: \"%s\" CT:%llu\n",
+ printk(KERN_INFO
+ "md: SB: (V:%u) (F:0x%08x) Array-ID:<%02x%02x%02x%02x"
+ ":%02x%02x:%02x%02x:%02x%02x:%02x%02x%02x%02x%02x%02x>\n"
+ "md: Name: \"%s\" CT:%llu\n",
le32_to_cpu(sb->major_version),
le32_to_cpu(sb->feature_map),
uuid[0], uuid[1], uuid[2], uuid[3],
@@ -1770,12 +1771,13 @@
& MD_SUPERBLOCK_1_TIME_SEC_MASK);
uuid = sb->device_uuid;
- printk(KERN_INFO "md: L%u SZ%llu RD:%u LO:%u CS:%u DO:%llu DS:%llu SO:%llu"
+ printk(KERN_INFO
+ "md: L%u SZ%llu RD:%u LO:%u CS:%u DO:%llu DS:%llu SO:%llu"
" RO:%llu\n"
- KERN_INFO "md: Dev:%08x UUID: %02x%02x%02x%02x:%02x%02x:%02x%02x:%02x%02x"
- ":%02x%02x%02x%02x%02x%02x\n"
- KERN_INFO "md: (F:0x%08x) UT:%llu Events:%llu ResyncOffset:%llu CSUM:0x%08x\n"
- KERN_INFO "md: (MaxDev:%u) \n",
+ "md: Dev:%08x UUID: %02x%02x%02x%02x:%02x%02x:%02x%02x:%02x%02x"
+ ":%02x%02x%02x%02x%02x%02x\n"
+ "md: (F:0x%08x) UT:%llu Events:%llu ResyncOffset:%llu CSUM:0x%08x\n"
+ "md: (MaxDev:%u) \n",
le32_to_cpu(sb->level),
(unsigned long long)le64_to_cpu(sb->size),
le32_to_cpu(sb->raid_disks),
@@ -3573,7 +3575,8 @@
char *e;
unsigned long long new = simple_strtoull(buf, &e, 10);
- if (mddev->pers->quiesce == NULL)
+ if (mddev->pers == NULL ||
+ mddev->pers->quiesce == NULL)
return -EINVAL;
if (buf == e || (*e && *e != '\n'))
return -EINVAL;
@@ -3601,7 +3604,8 @@
char *e;
unsigned long long new = simple_strtoull(buf, &e, 10);
- if (mddev->pers->quiesce == NULL)
+ if (mddev->pers == NULL ||
+ mddev->pers->quiesce == NULL)
return -EINVAL;
if (buf == e || (*e && *e != '\n'))
return -EINVAL;
@@ -3844,11 +3848,9 @@
flush_scheduled_work();
mutex_lock(&disks_mutex);
- if (mddev->gendisk) {
- mutex_unlock(&disks_mutex);
- mddev_put(mddev);
- return -EEXIST;
- }
+ error = -EEXIST;
+ if (mddev->gendisk)
+ goto abort;
if (name) {
/* Need to ensure that 'name' is not a duplicate.
@@ -3860,17 +3862,15 @@
if (mddev2->gendisk &&
strcmp(mddev2->gendisk->disk_name, name) == 0) {
spin_unlock(&all_mddevs_lock);
- return -EEXIST;
+ goto abort;
}
spin_unlock(&all_mddevs_lock);
}
+ error = -ENOMEM;
mddev->queue = blk_alloc_queue(GFP_KERNEL);
- if (!mddev->queue) {
- mutex_unlock(&disks_mutex);
- mddev_put(mddev);
- return -ENOMEM;
- }
+ if (!mddev->queue)
+ goto abort;
mddev->queue->queuedata = mddev;
/* Can be unlocked because the queue is new: no concurrency */
@@ -3880,11 +3880,9 @@
disk = alloc_disk(1 << shift);
if (!disk) {
- mutex_unlock(&disks_mutex);
blk_cleanup_queue(mddev->queue);
mddev->queue = NULL;
- mddev_put(mddev);
- return -ENOMEM;
+ goto abort;
}
disk->major = MAJOR(mddev->unit);
disk->first_minor = unit << shift;
@@ -3906,16 +3904,22 @@
mddev->gendisk = disk;
error = kobject_init_and_add(&mddev->kobj, &md_ktype,
&disk_to_dev(disk)->kobj, "%s", "md");
- mutex_unlock(&disks_mutex);
- if (error)
+ if (error) {
+ /* This isn't possible, but as kobject_init_and_add is marked
+ * __must_check, we must do something with the result
+ */
printk(KERN_WARNING "md: cannot register %s/md - name in use\n",
disk->disk_name);
- else {
+ error = 0;
+ }
+ abort:
+ mutex_unlock(&disks_mutex);
+ if (!error) {
kobject_uevent(&mddev->kobj, KOBJ_ADD);
mddev->sysfs_state = sysfs_get_dirent(mddev->kobj.sd, "array_state");
}
mddev_put(mddev);
- return 0;
+ return error;
}
static struct kobject *md_probe(dev_t dev, int *part, void *data)
@@ -6334,10 +6338,16 @@
sysfs_notify(&mddev->kobj, NULL, "sync_completed");
}
- if (j >= mddev->resync_max)
- wait_event(mddev->recovery_wait,
- mddev->resync_max > j
- || kthread_should_stop());
+ while (j >= mddev->resync_max && !kthread_should_stop()) {
+ /* As this condition is controlled by user-space,
+ * we can block indefinitely, so use '_interruptible'
+ * to avoid triggering warnings.
+ */
+ flush_signals(current); /* just in case */
+ wait_event_interruptible(mddev->recovery_wait,
+ mddev->resync_max > j
+ || kthread_should_stop());
+ }
if (kthread_should_stop())
goto interrupted;
diff --git a/drivers/md/multipath.c b/drivers/md/multipath.c
index cbe368f..237fe3f 100644
--- a/drivers/md/multipath.c
+++ b/drivers/md/multipath.c
@@ -294,7 +294,8 @@
for (path = first; path <= last; path++)
if ((p=conf->multipaths+path)->rdev == NULL) {
q = rdev->bdev->bd_disk->queue;
- blk_queue_stack_limits(mddev->queue, q);
+ disk_stack_limits(mddev->gendisk, rdev->bdev,
+ rdev->data_offset << 9);
/* as we don't honour merge_bvec_fn, we must never risk
* violating it, so limit ->max_sector to one PAGE, as
@@ -463,9 +464,9 @@
disk = conf->multipaths + disk_idx;
disk->rdev = rdev;
+ disk_stack_limits(mddev->gendisk, rdev->bdev,
+ rdev->data_offset << 9);
- blk_queue_stack_limits(mddev->queue,
- rdev->bdev->bd_disk->queue);
/* as we don't honour merge_bvec_fn, we must never risk
* violating it, not that we ever expect a device with
* a merge_bvec_fn to be involved in multipath */
diff --git a/drivers/md/raid0.c b/drivers/md/raid0.c
index ab4a489..335f490 100644
--- a/drivers/md/raid0.c
+++ b/drivers/md/raid0.c
@@ -170,8 +170,8 @@
}
dev[j] = rdev1;
- blk_queue_stack_limits(mddev->queue,
- rdev1->bdev->bd_disk->queue);
+ disk_stack_limits(mddev->gendisk, rdev1->bdev,
+ rdev1->data_offset << 9);
/* as we don't honour merge_bvec_fn, we must never risk
* violating it, so limit ->max_sector to one PAGE, as
* a one page request is never in violation.
@@ -250,6 +250,11 @@
mddev->chunk_sectors << 9);
goto abort;
}
+
+ blk_queue_io_min(mddev->queue, mddev->chunk_sectors << 9);
+ blk_queue_io_opt(mddev->queue,
+ (mddev->chunk_sectors << 9) * mddev->raid_disks);
+
printk(KERN_INFO "raid0: done.\n");
mddev->private = conf;
return 0;
diff --git a/drivers/md/raid1.c b/drivers/md/raid1.c
index 89939a7..0569efb 100644
--- a/drivers/md/raid1.c
+++ b/drivers/md/raid1.c
@@ -1123,8 +1123,8 @@
for (mirror = first; mirror <= last; mirror++)
if ( !(p=conf->mirrors+mirror)->rdev) {
- blk_queue_stack_limits(mddev->queue,
- rdev->bdev->bd_disk->queue);
+ disk_stack_limits(mddev->gendisk, rdev->bdev,
+ rdev->data_offset << 9);
/* as we don't honour merge_bvec_fn, we must never risk
* violating it, so limit ->max_sector to one PAGE, as
* a one page request is never in violation.
@@ -1988,9 +1988,8 @@
disk = conf->mirrors + disk_idx;
disk->rdev = rdev;
-
- blk_queue_stack_limits(mddev->queue,
- rdev->bdev->bd_disk->queue);
+ disk_stack_limits(mddev->gendisk, rdev->bdev,
+ rdev->data_offset << 9);
/* as we don't honour merge_bvec_fn, we must never risk
* violating it, so limit ->max_sector to one PAGE, as
* a one page request is never in violation.
diff --git a/drivers/md/raid10.c b/drivers/md/raid10.c
index ae12cea..7298a5e 100644
--- a/drivers/md/raid10.c
+++ b/drivers/md/raid10.c
@@ -1151,8 +1151,8 @@
for ( ; mirror <= last ; mirror++)
if ( !(p=conf->mirrors+mirror)->rdev) {
- blk_queue_stack_limits(mddev->queue,
- rdev->bdev->bd_disk->queue);
+ disk_stack_limits(mddev->gendisk, rdev->bdev,
+ rdev->data_offset << 9);
/* as we don't honour merge_bvec_fn, we must never risk
* violating it, so limit ->max_sector to one PAGE, as
* a one page request is never in violation.
@@ -2044,7 +2044,7 @@
static int run(mddev_t *mddev)
{
conf_t *conf;
- int i, disk_idx;
+ int i, disk_idx, chunk_size;
mirror_info_t *disk;
mdk_rdev_t *rdev;
int nc, fc, fo;
@@ -2130,6 +2130,14 @@
spin_lock_init(&conf->device_lock);
mddev->queue->queue_lock = &conf->device_lock;
+ chunk_size = mddev->chunk_sectors << 9;
+ blk_queue_io_min(mddev->queue, chunk_size);
+ if (conf->raid_disks % conf->near_copies)
+ blk_queue_io_opt(mddev->queue, chunk_size * conf->raid_disks);
+ else
+ blk_queue_io_opt(mddev->queue, chunk_size *
+ (conf->raid_disks / conf->near_copies));
+
list_for_each_entry(rdev, &mddev->disks, same_set) {
disk_idx = rdev->raid_disk;
if (disk_idx >= mddev->raid_disks
@@ -2138,9 +2146,8 @@
disk = conf->mirrors + disk_idx;
disk->rdev = rdev;
-
- blk_queue_stack_limits(mddev->queue,
- rdev->bdev->bd_disk->queue);
+ disk_stack_limits(mddev->gendisk, rdev->bdev,
+ rdev->data_offset << 9);
/* as we don't honour merge_bvec_fn, we must never risk
* violating it, so limit ->max_sector to one PAGE, as
* a one page request is never in violation.
diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c
index f9f991e..3783553 100644
--- a/drivers/md/raid5.c
+++ b/drivers/md/raid5.c
@@ -3699,13 +3699,21 @@
goto retry;
}
}
- /* FIXME what if we get a false positive because these
- * are being updated.
- */
- if (logical_sector >= mddev->suspend_lo &&
+
+ if (bio_data_dir(bi) == WRITE &&
+ logical_sector >= mddev->suspend_lo &&
logical_sector < mddev->suspend_hi) {
release_stripe(sh);
- schedule();
+ /* As the suspend_* range is controlled by
+ * userspace, we want an interruptible
+ * wait.
+ */
+ flush_signals(current);
+ prepare_to_wait(&conf->wait_for_overlap,
+ &w, TASK_INTERRUPTIBLE);
+ if (logical_sector >= mddev->suspend_lo &&
+ logical_sector < mddev->suspend_hi)
+ schedule();
goto retry;
}
@@ -4452,7 +4460,7 @@
static int run(mddev_t *mddev)
{
raid5_conf_t *conf;
- int working_disks = 0;
+ int working_disks = 0, chunk_size;
mdk_rdev_t *rdev;
if (mddev->recovery_cp != MaxSector)
@@ -4607,6 +4615,14 @@
md_set_array_sectors(mddev, raid5_size(mddev, 0, 0));
blk_queue_merge_bvec(mddev->queue, raid5_mergeable_bvec);
+ chunk_size = mddev->chunk_sectors << 9;
+ blk_queue_io_min(mddev->queue, chunk_size);
+ blk_queue_io_opt(mddev->queue, chunk_size *
+ (conf->raid_disks - conf->max_degraded));
+
+ list_for_each_entry(rdev, &mddev->disks, same_set)
+ disk_stack_limits(mddev->gendisk, rdev->bdev,
+ rdev->data_offset << 9);
return 0;
abort:
diff --git a/drivers/media/common/tuners/tuner-xc2028.c b/drivers/media/common/tuners/tuner-xc2028.c
index b6da9c38..aa20ce8 100644
--- a/drivers/media/common/tuners/tuner-xc2028.c
+++ b/drivers/media/common/tuners/tuner-xc2028.c
@@ -1096,8 +1096,19 @@
}
/* All S-code tables need a 200kHz shift */
- if (priv->ctrl.demod)
+ if (priv->ctrl.demod) {
demod = priv->ctrl.demod + 200;
+ /*
+ * The DTV7 S-code table needs a 700 kHz shift.
+ * Thanks to Terry Wu <terrywu2009@gmail.com> for reporting this
+ *
+ * DTV7 is only used in Australia. Germany or Italy may also
+ * use this firmware after initialization, but a tune to a UHF
+ * channel should then cause DTV78 to be used.
+ */
+ if (type & DTV7)
+ demod += 500;
+ }
return generic_set_freq(fe, p->frequency,
T_DIGITAL_TV, type, 0, demod);
diff --git a/drivers/media/dvb/bt8xx/dst_ca.c b/drivers/media/dvb/bt8xx/dst_ca.c
index 4601b05..0e246ea 100644
--- a/drivers/media/dvb/bt8xx/dst_ca.c
+++ b/drivers/media/dvb/bt8xx/dst_ca.c
@@ -21,6 +21,7 @@
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/init.h>
+#include <linux/smp_lock.h>
#include <linux/string.h>
#include <linux/dvb/ca.h>
#include "dvbdev.h"
diff --git a/drivers/media/dvb/dvb-core/dvbdev.h b/drivers/media/dvb/dvb-core/dvbdev.h
index 7992730..487919b 100644
--- a/drivers/media/dvb/dvb-core/dvbdev.h
+++ b/drivers/media/dvb/dvb-core/dvbdev.h
@@ -27,7 +27,6 @@
#include <linux/poll.h>
#include <linux/fs.h>
#include <linux/list.h>
-#include <linux/smp_lock.h>
#define DVB_MAJOR 212
diff --git a/drivers/media/dvb/ttpci/Kconfig b/drivers/media/dvb/ttpci/Kconfig
index 68eb449..d8d4214 100644
--- a/drivers/media/dvb/ttpci/Kconfig
+++ b/drivers/media/dvb/ttpci/Kconfig
@@ -1,5 +1,6 @@
config TTPCI_EEPROM
tristate
+ depends on I2C
default n
config DVB_AV7110
diff --git a/drivers/media/dvb/ttpci/av7110.c b/drivers/media/dvb/ttpci/av7110.c
index d1d959e..8d65c65 100644
--- a/drivers/media/dvb/ttpci/av7110.c
+++ b/drivers/media/dvb/ttpci/av7110.c
@@ -36,7 +36,6 @@
#include <linux/fs.h>
#include <linux/timer.h>
#include <linux/poll.h>
-#include <linux/smp_lock.h>
#include <linux/kernel.h>
#include <linux/sched.h>
diff --git a/drivers/media/radio/radio-mr800.c b/drivers/media/radio/radio-mr800.c
index 837467f..575bf9d 100644
--- a/drivers/media/radio/radio-mr800.c
+++ b/drivers/media/radio/radio-mr800.c
@@ -58,6 +58,7 @@
#include <linux/module.h>
#include <linux/init.h>
#include <linux/slab.h>
+#include <linux/smp_lock.h>
#include <linux/input.h>
#include <linux/videodev2.h>
#include <media/v4l2-device.h>
diff --git a/drivers/media/radio/radio-si470x.c b/drivers/media/radio/radio-si470x.c
index 640421c..e85f318 100644
--- a/drivers/media/radio/radio-si470x.c
+++ b/drivers/media/radio/radio-si470x.c
@@ -127,6 +127,7 @@
#include <linux/module.h>
#include <linux/init.h>
#include <linux/slab.h>
+#include <linux/smp_lock.h>
#include <linux/input.h>
#include <linux/usb.h>
#include <linux/hid.h>
@@ -1200,7 +1201,7 @@
video_unregister_device(radio->videodev);
kfree(radio->buffer);
kfree(radio);
- goto done;
+ goto unlock;
}
/* stop rds reception */
@@ -1213,9 +1214,8 @@
retval = si470x_stop(radio);
usb_autopm_put_interface(radio->intf);
}
-
+unlock:
mutex_unlock(&radio->disconnect_lock);
-
done:
return retval;
}
diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig
index 061e147..84b6fc1 100644
--- a/drivers/media/video/Kconfig
+++ b/drivers/media/video/Kconfig
@@ -312,6 +312,14 @@
OV7670 VGA camera. It currently only works with the M88ALP01
controller.
+config VIDEO_MT9V011
+ tristate "Micron mt9v011 sensor support"
+ depends on I2C && VIDEO_V4L2
+ ---help---
+ This is a Video4Linux2 sensor-level driver for the Micron
+ mt0v011 1.3 Mpixel camera. It currently only works with the
+ em28xx driver.
+
config VIDEO_TCM825X
tristate "TCM825x camera sensor support"
depends on I2C && VIDEO_V4L2
diff --git a/drivers/media/video/Makefile b/drivers/media/video/Makefile
index 7fb3add..9f2e321 100644
--- a/drivers/media/video/Makefile
+++ b/drivers/media/video/Makefile
@@ -69,6 +69,7 @@
obj-$(CONFIG_VIDEO_OV7670) += ov7670.o
obj-$(CONFIG_VIDEO_TCM825X) += tcm825x.o
obj-$(CONFIG_VIDEO_TVEEPROM) += tveeprom.o
+obj-$(CONFIG_VIDEO_MT9V011) += mt9v011.o
obj-$(CONFIG_SOC_CAMERA_MT9M001) += mt9m001.o
obj-$(CONFIG_SOC_CAMERA_MT9M111) += mt9m111.o
diff --git a/drivers/media/video/bt8xx/bttv-driver.c b/drivers/media/video/bt8xx/bttv-driver.c
index 5eb1464..d147d29 100644
--- a/drivers/media/video/bt8xx/bttv-driver.c
+++ b/drivers/media/video/bt8xx/bttv-driver.c
@@ -41,6 +41,7 @@
#include <linux/fs.h>
#include <linux/kernel.h>
#include <linux/sched.h>
+#include <linux/smp_lock.h>
#include <linux/interrupt.h>
#include <linux/kdev_t.h>
#include "bttvp.h"
diff --git a/drivers/media/video/cx18/cx18-cards.c b/drivers/media/video/cx18/cx18-cards.c
index c92a250..36f2d76 100644
--- a/drivers/media/video/cx18/cx18-cards.c
+++ b/drivers/media/video/cx18/cx18-cards.c
@@ -198,11 +198,14 @@
static const struct cx18_card cx18_card_mpc718 = {
.type = CX18_CARD_YUAN_MPC718,
- .name = "Yuan MPC718",
- .comment = "Analog video capture works; some audio line in may not.\n",
+ .name = "Yuan MPC718 MiniPCI DVB-T/Analog",
+ .comment = "Experimenters needed for device to work well.\n"
+ "\tTo help, mail the ivtv-devel list (www.ivtvdriver.org).\n",
.v4l2_capabilities = CX18_CAP_ENCODER,
.hw_audio_ctrl = CX18_HW_418_AV,
- .hw_all = CX18_HW_418_AV | CX18_HW_TUNER | CX18_HW_GPIO_RESET_CTRL,
+ .hw_muxer = CX18_HW_GPIO_MUX,
+ .hw_all = CX18_HW_418_AV | CX18_HW_TUNER |
+ CX18_HW_GPIO_MUX | CX18_HW_DVB | CX18_HW_GPIO_RESET_CTRL,
.video_inputs = {
{ CX18_CARD_INPUT_VID_TUNER, 0, CX18_AV_COMPOSITE2 },
{ CX18_CARD_INPUT_SVIDEO1, 1,
@@ -211,27 +214,34 @@
{ CX18_CARD_INPUT_SVIDEO2, 2,
CX18_AV_SVIDEO_LUMA7 | CX18_AV_SVIDEO_CHROMA8 },
{ CX18_CARD_INPUT_COMPOSITE2, 2, CX18_AV_COMPOSITE6 },
- { CX18_CARD_INPUT_COMPOSITE3, 2, CX18_AV_COMPOSITE3 },
},
.audio_inputs = {
{ CX18_CARD_INPUT_AUD_TUNER, CX18_AV_AUDIO5, 0 },
- { CX18_CARD_INPUT_LINE_IN1, CX18_AV_AUDIO_SERIAL1, 0 },
- { CX18_CARD_INPUT_LINE_IN2, CX18_AV_AUDIO_SERIAL1, 0 },
+ { CX18_CARD_INPUT_LINE_IN1, CX18_AV_AUDIO_SERIAL1, 1 },
+ { CX18_CARD_INPUT_LINE_IN2, CX18_AV_AUDIO_SERIAL2, 1 },
},
- .radio_input = { CX18_CARD_INPUT_AUD_TUNER, CX18_AV_AUDIO_SERIAL1, 0 },
.tuners = {
/* XC3028 tuner */
{ .std = V4L2_STD_ALL, .tuner = TUNER_XC2028 },
},
+ /* FIXME - the FM radio is just a guess and driver doesn't use SIF */
+ .radio_input = { CX18_CARD_INPUT_AUD_TUNER, CX18_AV_AUDIO5, 2 },
.ddr = {
- /* Probably Samsung K4D263238G-VC33 memory */
- .chip_config = 0x003,
- .refresh = 0x30c,
- .timing1 = 0x23230b73,
- .timing2 = 0x08,
+ /* Hynix HY5DU283222B DDR RAM */
+ .chip_config = 0x303,
+ .refresh = 0x3bd,
+ .timing1 = 0x36320966,
+ .timing2 = 0x1f,
.tune_lane = 0,
.initial_emrs = 2,
},
+ .gpio_init.initial_value = 0x1,
+ .gpio_init.direction = 0x3,
+ /* FIXME - these GPIO's are just guesses */
+ .gpio_audio_input = { .mask = 0x3,
+ .tuner = 0x1,
+ .linein = 0x3,
+ .radio = 0x1 },
.xceive_pin = 0,
.pci_list = cx18_pci_mpc718,
.i2c = &cx18_i2c_std,
diff --git a/drivers/media/video/cx18/cx18-dvb.c b/drivers/media/video/cx18/cx18-dvb.c
index 6ea3fe6..51a0c33 100644
--- a/drivers/media/video/cx18/cx18-dvb.c
+++ b/drivers/media/video/cx18/cx18-dvb.c
@@ -30,6 +30,10 @@
#include "s5h1409.h"
#include "mxl5005s.h"
#include "zl10353.h"
+
+#include <linux/firmware.h>
+#include "mt352.h"
+#include "mt352_priv.h"
#include "tuner-xc2028.h"
DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
@@ -38,6 +42,11 @@
#define CX18_CLOCK_ENABLE2 0xc71024
#define CX18_DMUX_CLK_MASK 0x0080
+/*
+ * CX18_CARD_HVR_1600_ESMT
+ * CX18_CARD_HVR_1600_SAMSUNG
+ */
+
static struct mxl5005s_config hauppauge_hvr1600_tuner = {
.i2c_address = 0xC6 >> 1,
.if_freq = IF_FREQ_5380000HZ,
@@ -65,6 +74,9 @@
.mpeg_timing = S5H1409_MPEGTIMING_CONTINOUS_NONINVERTING_CLOCK
};
+/*
+ * CX18_CARD_LEADTEK_DVR3100H
+ */
/* Information/confirmation of proper config values provided by Terry Wu */
static struct zl10353_config leadtek_dvr3100h_demod = {
.demod_address = 0x1e >> 1, /* Datasheet suggested straps */
@@ -74,6 +86,121 @@
.disable_i2c_gate_ctrl = 1, /* Disable the I2C gate */
};
+/*
+ * CX18_CARD_YUAN_MPC718
+ */
+/*
+ * Due to
+ *
+ * 1. an absence of information on how to prgram the MT352
+ * 2. the Linux mt352 module pushing MT352 initialzation off onto us here
+ *
+ * We have to use an init sequence that *you* must extract from the Windows
+ * driver (yuanrap.sys) and which we load as a firmware.
+ *
+ * If someone can provide me with a Zarlink MT352 (Intel CE6352?) Design Manual
+ * with chip programming details, then I can remove this annoyance.
+ */
+static int yuan_mpc718_mt352_reqfw(struct cx18_stream *stream,
+ const struct firmware **fw)
+{
+ struct cx18 *cx = stream->cx;
+ const char *fn = "dvb-cx18-mpc718-mt352.fw";
+ int ret;
+
+ ret = request_firmware(fw, fn, &cx->pci_dev->dev);
+ if (ret)
+ CX18_ERR("Unable to open firmware file %s\n", fn);
+ else {
+ size_t sz = (*fw)->size;
+ if (sz < 2 || sz > 64 || (sz % 2) != 0) {
+ CX18_ERR("Firmware %s has a bad size: %lu bytes\n",
+ fn, (unsigned long) sz);
+ ret = -EILSEQ;
+ release_firmware(*fw);
+ *fw = NULL;
+ }
+ }
+
+ if (ret) {
+ CX18_ERR("The MPC718 board variant with the MT352 DVB-T"
+ "demodualtor will not work without it\n");
+ CX18_ERR("Run 'linux/Documentation/dvb/get_dvb_firmware "
+ "mpc718' if you need the firmware\n");
+ }
+ return ret;
+}
+
+static int yuan_mpc718_mt352_init(struct dvb_frontend *fe)
+{
+ struct cx18_dvb *dvb = container_of(fe->dvb,
+ struct cx18_dvb, dvb_adapter);
+ struct cx18_stream *stream = container_of(dvb, struct cx18_stream, dvb);
+ const struct firmware *fw = NULL;
+ int ret;
+ int i;
+ u8 buf[3];
+
+ ret = yuan_mpc718_mt352_reqfw(stream, &fw);
+ if (ret)
+ return ret;
+
+ /* Loop through all the register-value pairs in the firmware file */
+ for (i = 0; i < fw->size; i += 2) {
+ buf[0] = fw->data[i];
+ /* Intercept a few registers we want to set ourselves */
+ switch (buf[0]) {
+ case TRL_NOMINAL_RATE_0:
+ /* Set our custom OFDM bandwidth in the case below */
+ break;
+ case TRL_NOMINAL_RATE_1:
+ /* 6 MHz: 64/7 * 6/8 / 20.48 * 2^16 = 0x55b6.db6 */
+ /* 7 MHz: 64/7 * 7/8 / 20.48 * 2^16 = 0x6400 */
+ /* 8 MHz: 64/7 * 8/8 / 20.48 * 2^16 = 0x7249.249 */
+ buf[1] = 0x72;
+ buf[2] = 0x49;
+ mt352_write(fe, buf, 3);
+ break;
+ case INPUT_FREQ_0:
+ /* Set our custom IF in the case below */
+ break;
+ case INPUT_FREQ_1:
+ /* 4.56 MHz IF: (20.48 - 4.56)/20.48 * 2^14 = 0x31c0 */
+ buf[1] = 0x31;
+ buf[2] = 0xc0;
+ mt352_write(fe, buf, 3);
+ break;
+ default:
+ /* Pass through the register-value pair from the fw */
+ buf[1] = fw->data[i+1];
+ mt352_write(fe, buf, 2);
+ break;
+ }
+ }
+
+ buf[0] = (u8) TUNER_GO;
+ buf[1] = 0x01; /* Go */
+ mt352_write(fe, buf, 2);
+ release_firmware(fw);
+ return 0;
+}
+
+static struct mt352_config yuan_mpc718_mt352_demod = {
+ .demod_address = 0x1e >> 1,
+ .adc_clock = 20480, /* 20.480 MHz */
+ .if2 = 4560, /* 4.560 MHz */
+ .no_tuner = 1, /* XC3028 is not behind the gate */
+ .demod_init = yuan_mpc718_mt352_init,
+};
+
+static struct zl10353_config yuan_mpc718_zl10353_demod = {
+ .demod_address = 0x1e >> 1, /* Datasheet suggested straps */
+ .if2 = 45600, /* 4.560 MHz IF from the XC3028 */
+ .parallel_ts = 1, /* Not a serial TS */
+ .no_tuner = 1, /* XC3028 is not behind the gate */
+ .disable_i2c_gate_ctrl = 1, /* Disable the I2C gate */
+};
+
static int dvb_register(struct cx18_stream *stream);
/* Kernel DVB framework calls this when the feed needs to start.
@@ -113,6 +240,7 @@
break;
case CX18_CARD_LEADTEK_DVR3100H:
+ case CX18_CARD_YUAN_MPC718:
default:
/* Assumption - Parallel transport - Signalling
* undefined or default.
@@ -326,6 +454,38 @@
fe->ops.tuner_ops.set_config(fe, &ctrl);
}
break;
+ case CX18_CARD_YUAN_MPC718:
+ /*
+ * TODO
+ * Apparently, these cards also could instead have a
+ * DiBcom demod supported by one of the db7000 drivers
+ */
+ dvb->fe = dvb_attach(mt352_attach,
+ &yuan_mpc718_mt352_demod,
+ &cx->i2c_adap[1]);
+ if (dvb->fe == NULL)
+ dvb->fe = dvb_attach(zl10353_attach,
+ &yuan_mpc718_zl10353_demod,
+ &cx->i2c_adap[1]);
+ if (dvb->fe != NULL) {
+ struct dvb_frontend *fe;
+ struct xc2028_config cfg = {
+ .i2c_adap = &cx->i2c_adap[1],
+ .i2c_addr = 0xc2 >> 1,
+ .ctrl = NULL,
+ };
+ static struct xc2028_ctrl ctrl = {
+ .fname = XC2028_DEFAULT_FIRMWARE,
+ .max_len = 64,
+ .demod = XC3028_FE_ZARLINK456,
+ .type = XC2028_AUTO,
+ };
+
+ fe = dvb_attach(xc2028_attach, dvb->fe, &cfg);
+ if (fe != NULL && fe->ops.tuner_ops.set_config != NULL)
+ fe->ops.tuner_ops.set_config(fe, &ctrl);
+ }
+ break;
default:
/* No Digital Tv Support */
break;
diff --git a/drivers/media/video/cx23885/cx23885-417.c b/drivers/media/video/cx23885/cx23885-417.c
index 2943bfd3..428f0c4 100644
--- a/drivers/media/video/cx23885/cx23885-417.c
+++ b/drivers/media/video/cx23885/cx23885-417.c
@@ -31,6 +31,7 @@
#include <linux/delay.h>
#include <linux/device.h>
#include <linux/firmware.h>
+#include <linux/smp_lock.h>
#include <media/v4l2-common.h>
#include <media/v4l2-ioctl.h>
#include <media/cx2341x.h>
diff --git a/drivers/media/video/cx23885/cx23885-dvb.c b/drivers/media/video/cx23885/cx23885-dvb.c
index 48a9751..86ac529 100644
--- a/drivers/media/video/cx23885/cx23885-dvb.c
+++ b/drivers/media/video/cx23885/cx23885-dvb.c
@@ -463,6 +463,30 @@
.if_khz = 5380,
};
+static int cx23885_dvb_set_frontend(struct dvb_frontend *fe,
+ struct dvb_frontend_parameters *param)
+{
+ struct cx23885_tsport *port = fe->dvb->priv;
+ struct cx23885_dev *dev = port->dev;
+
+ switch (dev->board) {
+ case CX23885_BOARD_HAUPPAUGE_HVR1275:
+ switch (param->u.vsb.modulation) {
+ case VSB_8:
+ cx23885_gpio_clear(dev, GPIO_5);
+ break;
+ case QAM_64:
+ case QAM_256:
+ default:
+ cx23885_gpio_set(dev, GPIO_5);
+ break;
+ }
+ break;
+ }
+ return (port->set_frontend_save) ?
+ port->set_frontend_save(fe, param) : -ENODEV;
+}
+
static int dvb_register(struct cx23885_tsport *port)
{
struct cx23885_dev *dev = port->dev;
@@ -502,6 +526,12 @@
0x60, &dev->i2c_bus[1].i2c_adap,
&hauppauge_hvr127x_config);
}
+
+ /* FIXME: temporary hack */
+ /* define bridge override to set_frontend */
+ port->set_frontend_save = fe0->dvb.frontend->ops.set_frontend;
+ fe0->dvb.frontend->ops.set_frontend = cx23885_dvb_set_frontend;
+
break;
case CX23885_BOARD_HAUPPAUGE_HVR1255:
i2c_bus = &dev->i2c_bus[0];
diff --git a/drivers/media/video/cx23885/cx23885-video.c b/drivers/media/video/cx23885/cx23885-video.c
index 70836af..5d60933 100644
--- a/drivers/media/video/cx23885/cx23885-video.c
+++ b/drivers/media/video/cx23885/cx23885-video.c
@@ -26,6 +26,7 @@
#include <linux/kmod.h>
#include <linux/kernel.h>
#include <linux/slab.h>
+#include <linux/smp_lock.h>
#include <linux/interrupt.h>
#include <linux/delay.h>
#include <linux/kthread.h>
diff --git a/drivers/media/video/cx23885/cx23885.h b/drivers/media/video/cx23885/cx23885.h
index 1a2ac51..214a55e 100644
--- a/drivers/media/video/cx23885/cx23885.h
+++ b/drivers/media/video/cx23885/cx23885.h
@@ -288,6 +288,10 @@
/* Allow a single tsport to have multiple frontends */
u32 num_frontends;
void *port_priv;
+
+ /* FIXME: temporary hack */
+ int (*set_frontend_save) (struct dvb_frontend *,
+ struct dvb_frontend_parameters *);
};
struct cx23885_dev {
diff --git a/drivers/media/video/cx88/cx88-blackbird.c b/drivers/media/video/cx88/cx88-blackbird.c
index 44eacfb..356d689 100644
--- a/drivers/media/video/cx88/cx88-blackbird.c
+++ b/drivers/media/video/cx88/cx88-blackbird.c
@@ -32,6 +32,7 @@
#include <linux/delay.h>
#include <linux/device.h>
#include <linux/firmware.h>
+#include <linux/smp_lock.h>
#include <media/v4l2-common.h>
#include <media/v4l2-ioctl.h>
#include <media/cx2341x.h>
diff --git a/drivers/media/video/cx88/cx88-video.c b/drivers/media/video/cx88/cx88-video.c
index b127708..2bb54c3 100644
--- a/drivers/media/video/cx88/cx88-video.c
+++ b/drivers/media/video/cx88/cx88-video.c
@@ -31,6 +31,7 @@
#include <linux/kmod.h>
#include <linux/kernel.h>
#include <linux/slab.h>
+#include <linux/smp_lock.h>
#include <linux/interrupt.h>
#include <linux/dma-mapping.h>
#include <linux/delay.h>
diff --git a/drivers/media/video/dabusb.c b/drivers/media/video/dabusb.c
index ec2f45d..0664d11 100644
--- a/drivers/media/video/dabusb.c
+++ b/drivers/media/video/dabusb.c
@@ -32,6 +32,7 @@
#include <linux/list.h>
#include <linux/vmalloc.h>
#include <linux/slab.h>
+#include <linux/smp_lock.h>
#include <linux/init.h>
#include <asm/uaccess.h>
#include <asm/atomic.h>
diff --git a/drivers/media/video/em28xx/Kconfig b/drivers/media/video/em28xx/Kconfig
index 16a5af3..6524b49 100644
--- a/drivers/media/video/em28xx/Kconfig
+++ b/drivers/media/video/em28xx/Kconfig
@@ -8,6 +8,8 @@
select VIDEO_SAA711X if VIDEO_HELPER_CHIPS_AUTO
select VIDEO_TVP5150 if VIDEO_HELPER_CHIPS_AUTO
select VIDEO_MSP3400 if VIDEO_HELPER_CHIPS_AUTO
+ select VIDEO_MT9V011 if VIDEO_HELPER_CHIPS_AUTO
+
---help---
This is a video4linux driver for Empia 28xx based TV cards.
diff --git a/drivers/media/video/em28xx/em28xx-cards.c b/drivers/media/video/em28xx/em28xx-cards.c
index c43fdb9..ebd24a2 100644
--- a/drivers/media/video/em28xx/em28xx-cards.c
+++ b/drivers/media/video/em28xx/em28xx-cards.c
@@ -58,6 +58,8 @@
module_param_array(card, int, NULL, 0444);
MODULE_PARM_DESC(card, "card type");
+#define MT9V011_VERSION 0x8243
+
/* Bitmask marking allocated devices from 0 to EM28XX_MAXBOARDS */
static unsigned long em28xx_devused;
@@ -191,6 +193,13 @@
{EM28XX_R08_GPIO, 0xff, 0xff, 10},
{ -1, -1, -1, -1},
};
+
+static struct em28xx_reg_seq silvercrest_reg_seq[] = {
+ {EM28XX_R08_GPIO, 0xff, 0xff, 10},
+ {EM28XX_R08_GPIO, 0x01, 0xf7, 10},
+ { -1, -1, -1, -1},
+};
+
/*
* Board definitions
*/
@@ -438,6 +447,18 @@
.amux = EM28XX_AMUX_VIDEO,
} },
},
+ [EM2820_BOARD_SILVERCREST_WEBCAM] = {
+ .name = "Silvercrest Webcam 1.3mpix",
+ .tuner_type = TUNER_ABSENT,
+ .is_27xx = 1,
+ .decoder = EM28XX_MT9V011,
+ .input = { {
+ .type = EM28XX_VMUX_COMPOSITE1,
+ .vmux = 0,
+ .amux = EM28XX_AMUX_VIDEO,
+ .gpio = silvercrest_reg_seq,
+ } },
+ },
[EM2821_BOARD_SUPERCOMP_USB_2] = {
.name = "Supercomp USB 2.0 TV",
.valid = EM28XX_BOARD_NOT_VALIDATED,
@@ -826,7 +847,7 @@
.tuner_gpio = default_tuner_gpio,
.decoder = EM28XX_TVP5150,
.has_dvb = 1,
- .dvb_gpio = default_analog,
+ .dvb_gpio = default_digital,
.input = { {
.type = EM28XX_VMUX_TELEVISION,
.vmux = TVP5150_COMPOSITE0,
@@ -1639,6 +1660,11 @@
I2C_CLIENT_END
};
+static unsigned short mt9v011_addrs[] = {
+ 0xba >> 1,
+ I2C_CLIENT_END
+};
+
static unsigned short msp3400_addrs[] = {
0x80 >> 1,
0x88 >> 1,
@@ -1678,6 +1704,46 @@
EM28XX_I2C_FREQ_100_KHZ;
}
+/* HINT method: webcam I2C chips
+ *
+ * This method work for webcams with Micron sensors
+ */
+static int em28xx_hint_sensor(struct em28xx *dev)
+{
+ int rc;
+ char *sensor_name;
+ unsigned char cmd;
+ __be16 version_be;
+ u16 version;
+
+ if (dev->model != EM2820_BOARD_UNKNOWN)
+ return 0;
+
+ dev->i2c_client.addr = 0xba >> 1;
+ cmd = 0;
+ i2c_master_send(&dev->i2c_client, &cmd, 1);
+ rc = i2c_master_recv(&dev->i2c_client, (char *)&version_be, 2);
+ if (rc != 2)
+ return -EINVAL;
+
+ version = be16_to_cpu(version_be);
+
+ switch (version) {
+ case MT9V011_VERSION:
+ dev->model = EM2820_BOARD_SILVERCREST_WEBCAM;
+ sensor_name = "mt9v011";
+ break;
+ default:
+ printk("Unknown Sensor 0x%04x\n", be16_to_cpu(version));
+ return -EINVAL;
+ }
+
+ em28xx_errdev("Sensor is %s, assuming that webcam is %s\n",
+ sensor_name, em28xx_boards[dev->model].name);
+
+ return 0;
+}
+
/* Since em28xx_pre_card_setup() requires a proper dev->model,
* this won't work for boards with generic PCI IDs
*/
@@ -1706,7 +1772,10 @@
em28xx_info("chip ID is em2750\n");
break;
case CHIP_ID_EM2820:
- em28xx_info("chip ID is em2820\n");
+ if (dev->board.is_27xx)
+ em28xx_info("chip is em2710\n");
+ else
+ em28xx_info("chip ID is em2820\n");
break;
case CHIP_ID_EM2840:
em28xx_info("chip ID is em2840\n");
@@ -2158,6 +2227,10 @@
before probing the i2c bus. */
em28xx_set_mode(dev, EM28XX_ANALOG_MODE);
break;
+ case EM2820_BOARD_SILVERCREST_WEBCAM:
+ /* FIXME: need to document the registers bellow */
+ em28xx_write_reg(dev, 0x0d, 0x42);
+ em28xx_write_reg(dev, 0x13, 0x08);
}
if (dev->board.has_snapshot_button)
@@ -2189,6 +2262,10 @@
v4l2_i2c_new_probed_subdev(&dev->v4l2_dev, &dev->i2c_adap,
"tvp5150", "tvp5150", tvp5150_addrs);
+ if (dev->board.decoder == EM28XX_MT9V011)
+ v4l2_i2c_new_probed_subdev(&dev->v4l2_dev, &dev->i2c_adap,
+ "mt9v011", "mt9v011", mt9v011_addrs);
+
if (dev->board.adecoder == EM28XX_TVAUDIO)
v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap,
"tvaudio", "tvaudio", dev->board.tvaudio_addr);
@@ -2333,6 +2410,8 @@
return errCode;
}
+ em28xx_hint_sensor(dev);
+
/* Do board specific init and eeprom reading */
em28xx_card_setup(dev);
@@ -2573,6 +2652,7 @@
retval = em28xx_init_dev(&dev, udev, interface, nr);
if (retval) {
em28xx_devused &= ~(1<<dev->devno);
+ mutex_unlock(&dev->lock);
kfree(dev);
goto err;
}
diff --git a/drivers/media/video/em28xx/em28xx-core.c b/drivers/media/video/em28xx/em28xx-core.c
index c8d7ce8..079ab4d 100644
--- a/drivers/media/video/em28xx/em28xx-core.c
+++ b/drivers/media/video/em28xx/em28xx-core.c
@@ -648,17 +648,28 @@
int em28xx_set_outfmt(struct em28xx *dev)
{
int ret;
+ int vinmode, vinctl, outfmt;
+
+ outfmt = dev->format->reg;
+
+ if (dev->board.is_27xx) {
+ vinmode = 0x0d;
+ vinctl = 0x00;
+ } else {
+ vinmode = 0x10;
+ vinctl = 0x11;
+ }
ret = em28xx_write_reg_bits(dev, EM28XX_R27_OUTFMT,
- dev->format->reg | 0x20, 0x3f);
+ outfmt | 0x20, 0xff);
+ if (ret < 0)
+ return ret;
+
+ ret = em28xx_write_reg(dev, EM28XX_R10_VINMODE, vinmode);
if (ret < 0)
return ret;
- ret = em28xx_write_reg(dev, EM28XX_R10_VINMODE, 0x10);
- if (ret < 0)
- return ret;
-
- return em28xx_write_reg(dev, EM28XX_R11_VINCTRL, 0x11);
+ return em28xx_write_reg(dev, EM28XX_R11_VINCTRL, vinctl);
}
static int em28xx_accumulator_set(struct em28xx *dev, u8 xmin, u8 xmax,
@@ -695,13 +706,19 @@
{
u8 mode;
/* the em2800 scaler only supports scaling down to 50% */
- if (dev->board.is_em2800)
+
+ if (dev->board.is_27xx) {
+ /* FIXME: Don't use the scaler yet */
+ mode = 0;
+ } else if (dev->board.is_em2800) {
mode = (v ? 0x20 : 0x00) | (h ? 0x10 : 0x00);
- else {
+ } else {
u8 buf[2];
+
buf[0] = h;
buf[1] = h >> 8;
em28xx_write_regs(dev, EM28XX_R30_HSCALELOW, (char *)buf, 2);
+
buf[0] = v;
buf[1] = v >> 8;
em28xx_write_regs(dev, EM28XX_R32_VSCALELOW, (char *)buf, 2);
@@ -720,8 +737,11 @@
height = norm_maxh(dev) >> 1;
em28xx_set_outfmt(dev);
+
+
em28xx_accumulator_set(dev, 1, (width - 4) >> 2, 1, (height - 4) >> 2);
em28xx_capture_area_set(dev, 0, 0, width >> 2, height >> 2);
+
return em28xx_scaler_set(dev, dev->hscale, dev->vscale);
}
diff --git a/drivers/media/video/em28xx/em28xx-dvb.c b/drivers/media/video/em28xx/em28xx-dvb.c
index e7b47c8..3da97c3 100644
--- a/drivers/media/video/em28xx/em28xx-dvb.c
+++ b/drivers/media/video/em28xx/em28xx-dvb.c
@@ -243,6 +243,14 @@
.mpeg_timing = S5H1409_MPEGTIMING_CONTINOUS_NONINVERTING_CLOCK
};
+static struct zl10353_config em28xx_terratec_xs_zl10353_xc3028 = {
+ .demod_address = (0x1e >> 1),
+ .no_tuner = 1,
+ .disable_i2c_gate_ctrl = 1,
+ .parallel_ts = 1,
+ .if2 = 45600,
+};
+
#ifdef EM28XX_DRX397XD_SUPPORT
/* [TODO] djh - not sure yet what the device config needs to contain */
static struct drx397xD_config em28xx_drx397xD_with_xc3028 = {
@@ -433,7 +441,6 @@
}
break;
case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900:
- case EM2880_BOARD_TERRATEC_HYBRID_XS:
case EM2880_BOARD_KWORLD_DVB_310U:
case EM2880_BOARD_EMPIRE_DUAL_TV:
dvb->frontend = dvb_attach(zl10353_attach,
@@ -444,6 +451,25 @@
goto out_free;
}
break;
+ case EM2880_BOARD_TERRATEC_HYBRID_XS:
+ dvb->frontend = dvb_attach(zl10353_attach,
+ &em28xx_terratec_xs_zl10353_xc3028,
+ &dev->i2c_adap);
+ if (dvb->frontend == NULL) {
+ /* This board could have either a zl10353 or a mt352.
+ If the chip id isn't for zl10353, try mt352 */
+
+ /* FIXME: make support for mt352 work */
+ printk(KERN_ERR "version of this board with mt352 not "
+ "currently supported\n");
+ result = -EINVAL;
+ goto out_free;
+ }
+ if (attach_xc3028(0x61, dev) < 0) {
+ result = -EINVAL;
+ goto out_free;
+ }
+ break;
case EM2883_BOARD_KWORLD_HYBRID_330U:
case EM2882_BOARD_EVGA_INDTUBE:
dvb->frontend = dvb_attach(s5h1409_attach,
diff --git a/drivers/media/video/em28xx/em28xx-i2c.c b/drivers/media/video/em28xx/em28xx-i2c.c
index 2c86fcf..27e33a2 100644
--- a/drivers/media/video/em28xx/em28xx-i2c.c
+++ b/drivers/media/video/em28xx/em28xx-i2c.c
@@ -483,7 +483,7 @@
[0xa0 >> 1] = "eeprom",
[0xb0 >> 1] = "tda9874",
[0xb8 >> 1] = "tvp5150a",
- [0xba >> 1] = "tvp5150a",
+ [0xba >> 1] = "webcam sensor or tvp5150a",
[0xc0 >> 1] = "tuner (analog)",
[0xc2 >> 1] = "tuner (analog)",
[0xc4 >> 1] = "tuner (analog)",
diff --git a/drivers/media/video/em28xx/em28xx-video.c b/drivers/media/video/em28xx/em28xx-video.c
index 8fe1bee..14316c9 100644
--- a/drivers/media/video/em28xx/em28xx-video.c
+++ b/drivers/media/video/em28xx/em28xx-video.c
@@ -90,10 +90,35 @@
/* supported video standards */
static struct em28xx_fmt format[] = {
{
- .name = "16bpp YUY2, 4:2:2, packed",
+ .name = "16 bpp YUY2, 4:2:2, packed",
.fourcc = V4L2_PIX_FMT_YUYV,
.depth = 16,
.reg = EM28XX_OUTFMT_YUV422_Y0UY1V,
+ }, {
+ .name = "16 bpp RGB 565, LE",
+ .fourcc = V4L2_PIX_FMT_RGB565,
+ .depth = 16,
+ .reg = EM28XX_OUTFMT_RGB_16_656,
+ }, {
+ .name = "8 bpp Bayer BGBG..GRGR",
+ .fourcc = V4L2_PIX_FMT_SBGGR8,
+ .depth = 8,
+ .reg = EM28XX_OUTFMT_RGB_8_BGBG,
+ }, {
+ .name = "8 bpp Bayer GRGR..BGBG",
+ .fourcc = V4L2_PIX_FMT_SGRBG8,
+ .depth = 8,
+ .reg = EM28XX_OUTFMT_RGB_8_GRGR,
+ }, {
+ .name = "8 bpp Bayer GBGB..RGRG",
+ .fourcc = V4L2_PIX_FMT_SGBRG8,
+ .depth = 8,
+ .reg = EM28XX_OUTFMT_RGB_8_GBGB,
+ }, {
+ .name = "12 bpp YUV411",
+ .fourcc = V4L2_PIX_FMT_YUV411P,
+ .depth = 12,
+ .reg = EM28XX_OUTFMT_YUV411,
},
};
@@ -701,7 +726,11 @@
return -EINVAL;
}
- if (dev->board.is_em2800) {
+ if (dev->board.is_27xx) {
+ /* FIXME: This is the only supported fmt */
+ width = 640;
+ height = 480;
+ } else if (dev->board.is_em2800) {
/* the em2800 can only scale down to 50% */
height = height > (3 * maxh / 4) ? maxh : maxh / 2;
width = width > (3 * maxw / 4) ? maxw : maxw / 2;
@@ -733,13 +762,40 @@
return 0;
}
+static int em28xx_set_video_format(struct em28xx *dev, unsigned int fourcc,
+ unsigned width, unsigned height)
+{
+ struct em28xx_fmt *fmt;
+
+ /* FIXME: This is the only supported fmt */
+ if (dev->board.is_27xx) {
+ width = 640;
+ height = 480;
+ }
+
+ fmt = format_by_fourcc(fourcc);
+ if (!fmt)
+ return -EINVAL;
+
+ dev->format = fmt;
+ dev->width = width;
+ dev->height = height;
+
+ /* set new image size */
+ get_scale(dev, dev->width, dev->height, &dev->hscale, &dev->vscale);
+
+ em28xx_set_alternate(dev);
+ em28xx_resolution_set(dev);
+
+ return 0;
+}
+
static int vidioc_s_fmt_vid_cap(struct file *file, void *priv,
struct v4l2_format *f)
{
struct em28xx_fh *fh = priv;
struct em28xx *dev = fh->dev;
int rc;
- struct em28xx_fmt *fmt;
rc = check_dev(dev);
if (rc < 0)
@@ -749,12 +805,6 @@
vidioc_try_fmt_vid_cap(file, priv, f);
- fmt = format_by_fourcc(f->fmt.pix.pixelformat);
- if (!fmt) {
- rc = -EINVAL;
- goto out;
- }
-
if (videobuf_queue_is_busy(&fh->vb_vidq)) {
em28xx_errdev("%s queue busy\n", __func__);
rc = -EBUSY;
@@ -767,16 +817,8 @@
goto out;
}
- /* set new image size */
- dev->width = f->fmt.pix.width;
- dev->height = f->fmt.pix.height;
- dev->format = fmt;
- get_scale(dev, dev->width, dev->height, &dev->hscale, &dev->vscale);
-
- em28xx_set_alternate(dev);
- em28xx_resolution_set(dev);
-
- rc = 0;
+ rc = em28xx_set_video_format(dev, f->fmt.pix.pixelformat,
+ f->fmt.pix.width, f->fmt.pix.height);
out:
mutex_unlock(&dev->lock);
@@ -1616,11 +1658,6 @@
filp->private_data = fh;
if (fh->type == V4L2_BUF_TYPE_VIDEO_CAPTURE && dev->users == 0) {
- dev->width = norm_maxw(dev);
- dev->height = norm_maxh(dev);
- dev->hscale = 0;
- dev->vscale = 0;
-
em28xx_set_mode(dev, EM28XX_ANALOG_MODE);
em28xx_set_alternate(dev);
em28xx_resolution_set(dev);
@@ -1962,15 +1999,14 @@
/* set default norm */
dev->norm = em28xx_video_template.current_norm;
- dev->width = norm_maxw(dev);
- dev->height = norm_maxh(dev);
dev->interlaced = EM28XX_INTERLACED_DEFAULT;
- dev->hscale = 0;
- dev->vscale = 0;
dev->ctl_input = 0;
/* Analog specific initialization */
dev->format = &format[0];
+ em28xx_set_video_format(dev, format[0].fourcc,
+ norm_maxw(dev), norm_maxh(dev));
+
video_mux(dev, dev->ctl_input);
/* Audio defaults */
diff --git a/drivers/media/video/em28xx/em28xx.h b/drivers/media/video/em28xx/em28xx.h
index 813ce45..d90fef4 100644
--- a/drivers/media/video/em28xx/em28xx.h
+++ b/drivers/media/video/em28xx/em28xx.h
@@ -107,6 +107,7 @@
#define EM2860_BOARD_TERRATEC_AV350 68
#define EM2882_BOARD_KWORLD_ATSC_315U 69
#define EM2882_BOARD_EVGA_INDTUBE 70
+#define EM2820_BOARD_SILVERCREST_WEBCAM 71
/* Limits minimum and default number of buffers */
#define EM28XX_MIN_BUF 4
@@ -360,6 +361,7 @@
EM28XX_NODECODER,
EM28XX_TVP5150,
EM28XX_SAA711X,
+ EM28XX_MT9V011,
};
enum em28xx_adecoder {
@@ -388,6 +390,7 @@
unsigned int max_range_640_480:1;
unsigned int has_dvb:1;
unsigned int has_snapshot_button:1;
+ unsigned int is_27xx:1;
unsigned int valid:1;
unsigned char xclk, i2c_speed;
diff --git a/drivers/media/video/gspca/stv06xx/stv06xx.h b/drivers/media/video/gspca/stv06xx/stv06xx.h
index 9df7137..992ce53 100644
--- a/drivers/media/video/gspca/stv06xx/stv06xx.h
+++ b/drivers/media/video/gspca/stv06xx/stv06xx.h
@@ -36,10 +36,6 @@
#define STV_ISOC_ENDPOINT_ADDR 0x81
-#ifndef V4L2_PIX_FMT_SGRBG8
-#define V4L2_PIX_FMT_SGRBG8 v4l2_fourcc('G', 'R', 'B', 'G')
-#endif
-
#define STV_REG23 0x0423
/* Control registers of the STV0600 ASIC */
diff --git a/drivers/media/video/mt9v011.c b/drivers/media/video/mt9v011.c
new file mode 100644
index 0000000..1fe8fc9
--- /dev/null
+++ b/drivers/media/video/mt9v011.c
@@ -0,0 +1,431 @@
+/*
+ * mt9v011 -Micron 1/4-Inch VGA Digital Image Sensor
+ *
+ * Copyright (c) 2009 Mauro Carvalho Chehab (mchehab@redhat.com)
+ * This code is placed under the terms of the GNU General Public License v2
+ */
+
+#include <linux/i2c.h>
+#include <linux/videodev2.h>
+#include <linux/delay.h>
+#include <media/v4l2-device.h>
+#include "mt9v011.h"
+#include <media/v4l2-i2c-drv.h>
+#include <media/v4l2-chip-ident.h>
+
+MODULE_DESCRIPTION("Micron mt9v011 sensor driver");
+MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
+MODULE_LICENSE("GPL");
+
+
+static int debug;
+module_param(debug, int, 0);
+MODULE_PARM_DESC(debug, "Debug level (0-2)");
+
+/* supported controls */
+static struct v4l2_queryctrl mt9v011_qctrl[] = {
+ {
+ .id = V4L2_CID_GAIN,
+ .type = V4L2_CTRL_TYPE_INTEGER,
+ .name = "Gain",
+ .minimum = 0,
+ .maximum = (1 << 10) - 1,
+ .step = 1,
+ .default_value = 0x0020,
+ .flags = 0,
+ }, {
+ .id = V4L2_CID_RED_BALANCE,
+ .type = V4L2_CTRL_TYPE_INTEGER,
+ .name = "Red Balance",
+ .minimum = -1 << 9,
+ .maximum = (1 << 9) - 1,
+ .step = 1,
+ .default_value = 0,
+ .flags = 0,
+ }, {
+ .id = V4L2_CID_BLUE_BALANCE,
+ .type = V4L2_CTRL_TYPE_INTEGER,
+ .name = "Blue Balance",
+ .minimum = -1 << 9,
+ .maximum = (1 << 9) - 1,
+ .step = 1,
+ .default_value = 0,
+ .flags = 0,
+ },
+};
+
+struct mt9v011 {
+ struct v4l2_subdev sd;
+ unsigned width, height;
+
+ u16 global_gain, red_bal, blue_bal;
+};
+
+static inline struct mt9v011 *to_mt9v011(struct v4l2_subdev *sd)
+{
+ return container_of(sd, struct mt9v011, sd);
+}
+
+static int mt9v011_read(struct v4l2_subdev *sd, unsigned char addr)
+{
+ struct i2c_client *c = v4l2_get_subdevdata(sd);
+ __be16 buffer;
+ int rc, val;
+
+ rc = i2c_master_send(c, &addr, 1);
+ if (rc != 1)
+ v4l2_dbg(0, debug, sd,
+ "i2c i/o error: rc == %d (should be 1)\n", rc);
+
+ msleep(10);
+
+ rc = i2c_master_recv(c, (char *)&buffer, 2);
+ if (rc != 2)
+ v4l2_dbg(0, debug, sd,
+ "i2c i/o error: rc == %d (should be 2)\n", rc);
+
+ val = be16_to_cpu(buffer);
+
+ v4l2_dbg(2, debug, sd, "mt9v011: read 0x%02x = 0x%04x\n", addr, val);
+
+ return val;
+}
+
+static void mt9v011_write(struct v4l2_subdev *sd, unsigned char addr,
+ u16 value)
+{
+ struct i2c_client *c = v4l2_get_subdevdata(sd);
+ unsigned char buffer[3];
+ int rc;
+
+ buffer[0] = addr;
+ buffer[1] = value >> 8;
+ buffer[2] = value & 0xff;
+
+ v4l2_dbg(2, debug, sd,
+ "mt9v011: writing 0x%02x 0x%04x\n", buffer[0], value);
+ rc = i2c_master_send(c, buffer, 3);
+ if (rc != 3)
+ v4l2_dbg(0, debug, sd,
+ "i2c i/o error: rc == %d (should be 3)\n", rc);
+}
+
+
+struct i2c_reg_value {
+ unsigned char reg;
+ u16 value;
+};
+
+/*
+ * Values used at the original driver
+ * Some values are marked as Reserved at the datasheet
+ */
+static const struct i2c_reg_value mt9v011_init_default[] = {
+ { R0D_MT9V011_RESET, 0x0001 },
+ { R0D_MT9V011_RESET, 0x0000 },
+
+ { R0C_MT9V011_SHUTTER_DELAY, 0x0000 },
+ { R09_MT9V011_SHUTTER_WIDTH, 0x1fc },
+
+ { R0A_MT9V011_CLK_SPEED, 0x0000 },
+ { R1E_MT9V011_DIGITAL_ZOOM, 0x0000 },
+ { R20_MT9V011_READ_MODE, 0x1000 },
+
+ { R07_MT9V011_OUT_CTRL, 0x000a }, /* chip enable */
+};
+
+static void set_balance(struct v4l2_subdev *sd)
+{
+ struct mt9v011 *core = to_mt9v011(sd);
+ u16 green1_gain, green2_gain, blue_gain, red_gain;
+
+ green1_gain = core->global_gain;
+ green2_gain = core->global_gain;
+
+ blue_gain = core->global_gain +
+ core->global_gain * core->blue_bal / (1 << 9);
+
+ red_gain = core->global_gain +
+ core->global_gain * core->blue_bal / (1 << 9);
+
+ mt9v011_write(sd, R2B_MT9V011_GREEN_1_GAIN, green1_gain);
+ mt9v011_write(sd, R2E_MT9V011_GREEN_2_GAIN, green1_gain);
+ mt9v011_write(sd, R2C_MT9V011_BLUE_GAIN, blue_gain);
+ mt9v011_write(sd, R2D_MT9V011_RED_GAIN, red_gain);
+}
+
+static void set_res(struct v4l2_subdev *sd)
+{
+ struct mt9v011 *core = to_mt9v011(sd);
+ unsigned vstart, hstart;
+
+ /*
+ * The mt9v011 doesn't have scaling. So, in order to select the desired
+ * resolution, we're cropping at the middle of the sensor.
+ * hblank and vblank should be adjusted, in order to warrant that
+ * we'll preserve the line timings for 30 fps, no matter what resolution
+ * is selected.
+ * NOTE: datasheet says that width (and height) should be filled with
+ * width-1. However, this doesn't work, since one pixel per line will
+ * be missing.
+ */
+
+ hstart = 14 + (640 - core->width) / 2;
+ mt9v011_write(sd, R02_MT9V011_COLSTART, hstart);
+ mt9v011_write(sd, R04_MT9V011_WIDTH, core->width);
+ mt9v011_write(sd, R05_MT9V011_HBLANK, 771 - core->width);
+
+ vstart = 8 + (640 - core->height) / 2;
+ mt9v011_write(sd, R01_MT9V011_ROWSTART, vstart);
+ mt9v011_write(sd, R03_MT9V011_HEIGHT, core->height);
+ mt9v011_write(sd, R06_MT9V011_VBLANK, 508 - core->height);
+};
+
+static int mt9v011_reset(struct v4l2_subdev *sd, u32 val)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(mt9v011_init_default); i++)
+ mt9v011_write(sd, mt9v011_init_default[i].reg,
+ mt9v011_init_default[i].value);
+
+ set_balance(sd);
+ set_res(sd);
+
+ return 0;
+};
+
+static int mt9v011_g_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
+{
+ struct mt9v011 *core = to_mt9v011(sd);
+
+ v4l2_dbg(1, debug, sd, "g_ctrl called\n");
+
+ switch (ctrl->id) {
+ case V4L2_CID_GAIN:
+ ctrl->value = core->global_gain;
+ return 0;
+ case V4L2_CID_RED_BALANCE:
+ ctrl->value = core->red_bal;
+ return 0;
+ case V4L2_CID_BLUE_BALANCE:
+ ctrl->value = core->blue_bal;
+ return 0;
+ }
+ return -EINVAL;
+}
+
+static int mt9v011_s_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
+{
+ struct mt9v011 *core = to_mt9v011(sd);
+ u8 i, n;
+ n = ARRAY_SIZE(mt9v011_qctrl);
+
+ for (i = 0; i < n; i++) {
+ if (ctrl->id != mt9v011_qctrl[i].id)
+ continue;
+ if (ctrl->value < mt9v011_qctrl[i].minimum ||
+ ctrl->value > mt9v011_qctrl[i].maximum)
+ return -ERANGE;
+ v4l2_dbg(1, debug, sd, "s_ctrl: id=%d, value=%d\n",
+ ctrl->id, ctrl->value);
+ break;
+ }
+
+ switch (ctrl->id) {
+ case V4L2_CID_GAIN:
+ core->global_gain = ctrl->value;
+ break;
+ case V4L2_CID_RED_BALANCE:
+ core->red_bal = ctrl->value;
+ break;
+ case V4L2_CID_BLUE_BALANCE:
+ core->blue_bal = ctrl->value;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ set_balance(sd);
+
+ return 0;
+}
+
+static int mt9v011_enum_fmt(struct v4l2_subdev *sd, struct v4l2_fmtdesc *fmt)
+{
+ if (fmt->index > 0)
+ return -EINVAL;
+
+ fmt->flags = 0;
+ strcpy(fmt->description, "8 bpp Bayer GRGR..BGBG");
+ fmt->pixelformat = V4L2_PIX_FMT_SGRBG8;
+
+ return 0;
+}
+
+static int mt9v011_try_fmt(struct v4l2_subdev *sd, struct v4l2_format *fmt)
+{
+ struct v4l2_pix_format *pix = &fmt->fmt.pix;
+
+ if (pix->pixelformat != V4L2_PIX_FMT_SGRBG8)
+ return -EINVAL;
+
+ v4l_bound_align_image(&pix->width, 48, 639, 1,
+ &pix->height, 32, 480, 1, 0);
+
+ return 0;
+}
+
+static int mt9v011_s_fmt(struct v4l2_subdev *sd, struct v4l2_format *fmt)
+{
+ struct v4l2_pix_format *pix = &fmt->fmt.pix;
+ struct mt9v011 *core = to_mt9v011(sd);
+ int rc;
+
+ rc = mt9v011_try_fmt(sd, fmt);
+ if (rc < 0)
+ return -EINVAL;
+
+ core->width = pix->width;
+ core->height = pix->height;
+
+ set_res(sd);
+
+ return 0;
+}
+
+
+#ifdef CONFIG_VIDEO_ADV_DEBUG
+static int mt9v011_g_register(struct v4l2_subdev *sd,
+ struct v4l2_dbg_register *reg)
+{
+ struct i2c_client *client = v4l2_get_subdevdata(sd);
+
+ if (!v4l2_chip_match_i2c_client(client, ®->match))
+ return -EINVAL;
+ if (!capable(CAP_SYS_ADMIN))
+ return -EPERM;
+
+ reg->val = mt9v011_read(sd, reg->reg & 0xff);
+ reg->size = 2;
+
+ return 0;
+}
+
+static int mt9v011_s_register(struct v4l2_subdev *sd,
+ struct v4l2_dbg_register *reg)
+{
+ struct i2c_client *client = v4l2_get_subdevdata(sd);
+
+ if (!v4l2_chip_match_i2c_client(client, ®->match))
+ return -EINVAL;
+ if (!capable(CAP_SYS_ADMIN))
+ return -EPERM;
+
+ mt9v011_write(sd, reg->reg & 0xff, reg->val & 0xffff);
+
+ return 0;
+}
+#endif
+
+static int mt9v011_g_chip_ident(struct v4l2_subdev *sd,
+ struct v4l2_dbg_chip_ident *chip)
+{
+ struct i2c_client *client = v4l2_get_subdevdata(sd);
+
+ return v4l2_chip_ident_i2c_client(client, chip, V4L2_IDENT_MT9V011,
+ MT9V011_VERSION);
+}
+
+static const struct v4l2_subdev_core_ops mt9v011_core_ops = {
+ .g_ctrl = mt9v011_g_ctrl,
+ .s_ctrl = mt9v011_s_ctrl,
+ .reset = mt9v011_reset,
+ .g_chip_ident = mt9v011_g_chip_ident,
+#ifdef CONFIG_VIDEO_ADV_DEBUG
+ .g_register = mt9v011_g_register,
+ .s_register = mt9v011_s_register,
+#endif
+};
+
+static const struct v4l2_subdev_video_ops mt9v011_video_ops = {
+ .enum_fmt = mt9v011_enum_fmt,
+ .try_fmt = mt9v011_try_fmt,
+ .s_fmt = mt9v011_s_fmt,
+};
+
+static const struct v4l2_subdev_ops mt9v011_ops = {
+ .core = &mt9v011_core_ops,
+ .video = &mt9v011_video_ops,
+};
+
+
+/****************************************************************************
+ I2C Client & Driver
+ ****************************************************************************/
+
+static int mt9v011_probe(struct i2c_client *c,
+ const struct i2c_device_id *id)
+{
+ u16 version;
+ struct mt9v011 *core;
+ struct v4l2_subdev *sd;
+
+ /* Check if the adapter supports the needed features */
+ if (!i2c_check_functionality(c->adapter,
+ I2C_FUNC_SMBUS_READ_BYTE | I2C_FUNC_SMBUS_WRITE_BYTE_DATA))
+ return -EIO;
+
+ core = kzalloc(sizeof(struct mt9v011), GFP_KERNEL);
+ if (!core)
+ return -ENOMEM;
+
+ sd = &core->sd;
+ v4l2_i2c_subdev_init(sd, c, &mt9v011_ops);
+
+ /* Check if the sensor is really a MT9V011 */
+ version = mt9v011_read(sd, R00_MT9V011_CHIP_VERSION);
+ if (version != MT9V011_VERSION) {
+ v4l2_info(sd, "*** unknown micron chip detected (0x%04x.\n",
+ version);
+ kfree(core);
+ return -EINVAL;
+ }
+
+ core->global_gain = 0x0024;
+ core->width = 640;
+ core->height = 480;
+
+ v4l_info(c, "chip found @ 0x%02x (%s)\n",
+ c->addr << 1, c->adapter->name);
+
+ return 0;
+}
+
+static int mt9v011_remove(struct i2c_client *c)
+{
+ struct v4l2_subdev *sd = i2c_get_clientdata(c);
+
+ v4l2_dbg(1, debug, sd,
+ "mt9v011.c: removing mt9v011 adapter on address 0x%x\n",
+ c->addr << 1);
+
+ v4l2_device_unregister_subdev(sd);
+ kfree(to_mt9v011(sd));
+ return 0;
+}
+
+/* ----------------------------------------------------------------------- */
+
+static const struct i2c_device_id mt9v011_id[] = {
+ { "mt9v011", 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, mt9v011_id);
+
+static struct v4l2_i2c_driver_data v4l2_i2c_data = {
+ .name = "mt9v011",
+ .probe = mt9v011_probe,
+ .remove = mt9v011_remove,
+ .id_table = mt9v011_id,
+};
diff --git a/drivers/media/video/mt9v011.h b/drivers/media/video/mt9v011.h
new file mode 100644
index 0000000..9e443ee
--- /dev/null
+++ b/drivers/media/video/mt9v011.h
@@ -0,0 +1,35 @@
+/*
+ * mt9v011 -Micron 1/4-Inch VGA Digital Image Sensor
+ *
+ * Copyright (c) 2009 Mauro Carvalho Chehab (mchehab@redhat.com)
+ * This code is placed under the terms of the GNU General Public License v2
+ */
+
+#ifndef MT9V011_H_
+#define MT9V011_H_
+
+#define R00_MT9V011_CHIP_VERSION 0x00
+#define R01_MT9V011_ROWSTART 0x01
+#define R02_MT9V011_COLSTART 0x02
+#define R03_MT9V011_HEIGHT 0x03
+#define R04_MT9V011_WIDTH 0x04
+#define R05_MT9V011_HBLANK 0x05
+#define R06_MT9V011_VBLANK 0x06
+#define R07_MT9V011_OUT_CTRL 0x07
+#define R09_MT9V011_SHUTTER_WIDTH 0x09
+#define R0A_MT9V011_CLK_SPEED 0x0a
+#define R0B_MT9V011_RESTART 0x0b
+#define R0C_MT9V011_SHUTTER_DELAY 0x0c
+#define R0D_MT9V011_RESET 0x0d
+#define R1E_MT9V011_DIGITAL_ZOOM 0x1e
+#define R20_MT9V011_READ_MODE 0x20
+#define R2B_MT9V011_GREEN_1_GAIN 0x2b
+#define R2C_MT9V011_BLUE_GAIN 0x2c
+#define R2D_MT9V011_RED_GAIN 0x2d
+#define R2E_MT9V011_GREEN_2_GAIN 0x2e
+#define R35_MT9V011_GLOBAL_GAIN 0x35
+#define RF1_MT9V011_CHIP_ENABLE 0xf1
+
+#define MT9V011_VERSION 0x8243
+
+#endif
diff --git a/drivers/media/video/pwc/pwc-if.c b/drivers/media/video/pwc/pwc-if.c
index db25c30..8d17cf6 100644
--- a/drivers/media/video/pwc/pwc-if.c
+++ b/drivers/media/video/pwc/pwc-if.c
@@ -62,6 +62,7 @@
#include <linux/module.h>
#include <linux/poll.h>
#include <linux/slab.h>
+#include <linux/smp_lock.h>
#ifdef CONFIG_USB_PWC_INPUT_EVDEV
#include <linux/usb/input.h>
#endif
diff --git a/drivers/media/video/pwc/pwc.h b/drivers/media/video/pwc/pwc.h
index 0be6f81..0b658de 100644
--- a/drivers/media/video/pwc/pwc.h
+++ b/drivers/media/video/pwc/pwc.h
@@ -29,7 +29,6 @@
#include <linux/usb.h>
#include <linux/spinlock.h>
#include <linux/wait.h>
-#include <linux/smp_lock.h>
#include <linux/version.h>
#include <linux/mutex.h>
#include <linux/mm.h>
diff --git a/drivers/media/video/s2255drv.c b/drivers/media/video/s2255drv.c
index 6be845c..9e3262c 100644
--- a/drivers/media/video/s2255drv.c
+++ b/drivers/media/video/s2255drv.c
@@ -48,6 +48,7 @@
#include <linux/videodev2.h>
#include <linux/version.h>
#include <linux/mm.h>
+#include <linux/smp_lock.h>
#include <media/videobuf-vmalloc.h>
#include <media/v4l2-common.h>
#include <media/v4l2-ioctl.h>
diff --git a/drivers/media/video/saa5246a.c b/drivers/media/video/saa5246a.c
index 155804b..b624a4c 100644
--- a/drivers/media/video/saa5246a.c
+++ b/drivers/media/video/saa5246a.c
@@ -43,7 +43,6 @@
#include <linux/mm.h>
#include <linux/init.h>
#include <linux/i2c.h>
-#include <linux/smp_lock.h>
#include <linux/mutex.h>
#include <linux/videotext.h>
#include <linux/videodev2.h>
diff --git a/drivers/media/video/saa5249.c b/drivers/media/video/saa5249.c
index 271d6e9..12835fb8 100644
--- a/drivers/media/video/saa5249.c
+++ b/drivers/media/video/saa5249.c
@@ -46,7 +46,6 @@
#include <linux/mm.h>
#include <linux/init.h>
#include <linux/i2c.h>
-#include <linux/smp_lock.h>
#include <linux/mutex.h>
#include <linux/delay.h>
#include <linux/videotext.h>
diff --git a/drivers/media/video/saa7134/saa7134-empress.c b/drivers/media/video/saa7134/saa7134-empress.c
index add1757..296788c 100644
--- a/drivers/media/video/saa7134/saa7134-empress.c
+++ b/drivers/media/video/saa7134/saa7134-empress.c
@@ -22,6 +22,7 @@
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/slab.h>
+#include <linux/smp_lock.h>
#include <linux/delay.h>
#include "saa7134-reg.h"
diff --git a/drivers/media/video/se401.c b/drivers/media/video/se401.c
index c8f0529..85ffc2c 100644
--- a/drivers/media/video/se401.c
+++ b/drivers/media/video/se401.c
@@ -31,6 +31,7 @@
#include <linux/init.h>
#include <linux/vmalloc.h>
#include <linux/slab.h>
+#include <linux/smp_lock.h>
#include <linux/pagemap.h>
#include <linux/usb.h>
#include "se401.h"
diff --git a/drivers/media/video/soc_camera.c b/drivers/media/video/soc_camera.c
index 16f595d..9f5ae81 100644
--- a/drivers/media/video/soc_camera.c
+++ b/drivers/media/video/soc_camera.c
@@ -237,11 +237,11 @@
return -ENOMEM;
icd->num_user_formats = fmts;
- fmts = 0;
dev_dbg(&icd->dev, "Found %d supported formats.\n", fmts);
/* Second pass - actually fill data formats */
+ fmts = 0;
for (i = 0; i < icd->num_formats; i++)
if (!ici->ops->get_formats) {
icd->user_formats[i].host_fmt = icd->formats + i;
@@ -877,8 +877,11 @@
(unsigned short)~0;
ret = soc_camera_init_user_formats(icd);
- if (ret < 0)
+ if (ret < 0) {
+ if (icd->ops->remove)
+ icd->ops->remove(icd);
goto eiufmt;
+ }
icd->height = DEFAULT_HEIGHT;
icd->width = DEFAULT_WIDTH;
@@ -902,8 +905,10 @@
{
struct soc_camera_device *icd = to_soc_camera_dev(dev);
+ mutex_lock(&icd->video_lock);
if (icd->ops->remove)
icd->ops->remove(icd);
+ mutex_unlock(&icd->video_lock);
soc_camera_free_user_formats(icd);
@@ -1145,6 +1150,7 @@
}
EXPORT_SYMBOL(soc_camera_video_start);
+/* Called from client .remove() methods with .video_lock held */
void soc_camera_video_stop(struct soc_camera_device *icd)
{
struct video_device *vdev = icd->vdev;
@@ -1154,10 +1160,8 @@
if (!icd->dev.parent || !vdev)
return;
- mutex_lock(&icd->video_lock);
video_unregister_device(vdev);
icd->vdev = NULL;
- mutex_unlock(&icd->video_lock);
}
EXPORT_SYMBOL(soc_camera_video_stop);
diff --git a/drivers/media/video/stk-webcam.c b/drivers/media/video/stk-webcam.c
index 2e59370..4d6785e 100644
--- a/drivers/media/video/stk-webcam.c
+++ b/drivers/media/video/stk-webcam.c
@@ -27,6 +27,7 @@
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/slab.h>
+#include <linux/smp_lock.h>
#include <linux/usb.h>
#include <linux/mm.h>
diff --git a/drivers/media/video/stradis.c b/drivers/media/video/stradis.c
index 0eb3130..eaada39 100644
--- a/drivers/media/video/stradis.c
+++ b/drivers/media/video/stradis.c
@@ -26,6 +26,7 @@
#include <linux/kernel.h>
#include <linux/major.h>
#include <linux/slab.h>
+#include <linux/smp_lock.h>
#include <linux/mm.h>
#include <linux/init.h>
#include <linux/poll.h>
diff --git a/drivers/media/video/stv680.c b/drivers/media/video/stv680.c
index 75f286f..8b4e7daf 100644
--- a/drivers/media/video/stv680.c
+++ b/drivers/media/video/stv680.c
@@ -62,6 +62,7 @@
#include <linux/init.h>
#include <linux/vmalloc.h>
#include <linux/slab.h>
+#include <linux/smp_lock.h>
#include <linux/pagemap.h>
#include <linux/errno.h>
#include <linux/videodev.h>
diff --git a/drivers/media/video/usbvideo/vicam.c b/drivers/media/video/usbvideo/vicam.c
index 8d73979..45fce39 100644
--- a/drivers/media/video/usbvideo/vicam.c
+++ b/drivers/media/video/usbvideo/vicam.c
@@ -43,6 +43,7 @@
#include <linux/vmalloc.h>
#include <linux/mm.h>
#include <linux/slab.h>
+#include <linux/smp_lock.h>
#include <linux/mutex.h>
#include <linux/firmware.h>
#include <linux/ihex.h>
diff --git a/drivers/media/video/usbvision/usbvision-video.c b/drivers/media/video/usbvision/usbvision-video.c
index 90b5891..90d9b5c 100644
--- a/drivers/media/video/usbvision/usbvision-video.c
+++ b/drivers/media/video/usbvision/usbvision-video.c
@@ -50,6 +50,7 @@
#include <linux/list.h>
#include <linux/timer.h>
#include <linux/slab.h>
+#include <linux/smp_lock.h>
#include <linux/mm.h>
#include <linux/utsname.h>
#include <linux/highmem.h>
diff --git a/drivers/media/video/v4l2-dev.c b/drivers/media/video/v4l2-dev.c
index 31eac66..a7f1b69 100644
--- a/drivers/media/video/v4l2-dev.c
+++ b/drivers/media/video/v4l2-dev.c
@@ -25,7 +25,6 @@
#include <linux/init.h>
#include <linux/kmod.h>
#include <linux/slab.h>
-#include <linux/smp_lock.h>
#include <asm/uaccess.h>
#include <asm/system.h>
diff --git a/drivers/media/video/vivi.c b/drivers/media/video/vivi.c
index cd72668..7705fc6 100644
--- a/drivers/media/video/vivi.c
+++ b/drivers/media/video/vivi.c
@@ -343,6 +343,53 @@
#define TO_U(r, g, b) \
(((-9714 * r - 19070 * g + 28784 * b + 32768) >> 16) + 128)
+/* precalculate color bar values to speed up rendering */
+static void precalculate_bars(struct vivi_fh *fh)
+{
+ struct vivi_dev *dev = fh->dev;
+ unsigned char r, g, b;
+ int k, is_yuv;
+
+ fh->input = dev->input;
+
+ for (k = 0; k < 8; k++) {
+ r = bars[fh->input].bar[k][0];
+ g = bars[fh->input].bar[k][1];
+ b = bars[fh->input].bar[k][2];
+ is_yuv = 0;
+
+ switch (fh->fmt->fourcc) {
+ case V4L2_PIX_FMT_YUYV:
+ case V4L2_PIX_FMT_UYVY:
+ is_yuv = 1;
+ break;
+ case V4L2_PIX_FMT_RGB565:
+ case V4L2_PIX_FMT_RGB565X:
+ r >>= 3;
+ g >>= 2;
+ b >>= 3;
+ break;
+ case V4L2_PIX_FMT_RGB555:
+ case V4L2_PIX_FMT_RGB555X:
+ r >>= 3;
+ g >>= 3;
+ b >>= 3;
+ break;
+ }
+
+ if (is_yuv) {
+ fh->bars[k][0] = TO_Y(r, g, b); /* Luma */
+ fh->bars[k][1] = TO_U(r, g, b); /* Cb */
+ fh->bars[k][2] = TO_V(r, g, b); /* Cr */
+ } else {
+ fh->bars[k][0] = r;
+ fh->bars[k][1] = g;
+ fh->bars[k][2] = b;
+ }
+ }
+
+}
+
#define TSTAMP_MIN_Y 24
#define TSTAMP_MAX_Y (TSTAMP_MIN_Y + 15)
#define TSTAMP_INPUT_X 10
@@ -755,6 +802,8 @@
buf->vb.height = fh->height;
buf->vb.field = field;
+ precalculate_bars(fh);
+
if (VIDEOBUF_NEEDS_INIT == buf->vb.state) {
rc = videobuf_iolock(vq, &buf->vb, NULL);
if (rc < 0)
@@ -893,53 +942,6 @@
return 0;
}
-/* precalculate color bar values to speed up rendering */
-static void precalculate_bars(struct vivi_fh *fh)
-{
- struct vivi_dev *dev = fh->dev;
- unsigned char r, g, b;
- int k, is_yuv;
-
- fh->input = dev->input;
-
- for (k = 0; k < 8; k++) {
- r = bars[fh->input].bar[k][0];
- g = bars[fh->input].bar[k][1];
- b = bars[fh->input].bar[k][2];
- is_yuv = 0;
-
- switch (fh->fmt->fourcc) {
- case V4L2_PIX_FMT_YUYV:
- case V4L2_PIX_FMT_UYVY:
- is_yuv = 1;
- break;
- case V4L2_PIX_FMT_RGB565:
- case V4L2_PIX_FMT_RGB565X:
- r >>= 3;
- g >>= 2;
- b >>= 3;
- break;
- case V4L2_PIX_FMT_RGB555:
- case V4L2_PIX_FMT_RGB555X:
- r >>= 3;
- g >>= 3;
- b >>= 3;
- break;
- }
-
- if (is_yuv) {
- fh->bars[k][0] = TO_Y(r, g, b); /* Luma */
- fh->bars[k][1] = TO_U(r, g, b); /* Cb */
- fh->bars[k][2] = TO_V(r, g, b); /* Cr */
- } else {
- fh->bars[k][0] = r;
- fh->bars[k][1] = g;
- fh->bars[k][2] = b;
- }
- }
-
-}
-
/*FIXME: This seems to be generic enough to be at videodev2 */
static int vidioc_s_fmt_vid_cap(struct file *file, void *priv,
struct v4l2_format *f)
@@ -965,8 +967,6 @@
fh->vb_vidq.field = f->fmt.pix.field;
fh->type = f->type;
- precalculate_bars(fh);
-
ret = 0;
out:
mutex_unlock(&q->vb_lock);
@@ -1357,6 +1357,7 @@
goto unreg_dev;
*vfd = vivi_template;
+ vfd->debug = debug;
ret = video_register_device(vfd, VFL_TYPE_GRABBER, video_nr);
if (ret < 0)
diff --git a/drivers/media/video/zoran/zoran_driver.c b/drivers/media/video/zoran/zoran_driver.c
index 3d7df32..bcdefb1 100644
--- a/drivers/media/video/zoran/zoran_driver.c
+++ b/drivers/media/video/zoran/zoran_driver.c
@@ -49,6 +49,7 @@
#include <linux/module.h>
#include <linux/delay.h>
#include <linux/slab.h>
+#include <linux/smp_lock.h>
#include <linux/pci.h>
#include <linux/vmalloc.h>
#include <linux/wait.h>
diff --git a/drivers/mfd/dm355evm_msp.c b/drivers/mfd/dm355evm_msp.c
index 7ac12cb..5b6e58a 100644
--- a/drivers/mfd/dm355evm_msp.c
+++ b/drivers/mfd/dm355evm_msp.c
@@ -32,8 +32,7 @@
* This driver was tested with firmware revision A4.
*/
-#if defined(CONFIG_KEYBOARD_DM355EVM) \
- || defined(CONFIG_KEYBOARD_DM355EVM_MODULE)
+#if defined(CONFIG_INPUT_DM355EVM) || defined(CONFIG_INPUT_DM355EVM_MODULE)
#define msp_has_keyboard() true
#else
#define msp_has_keyboard() false
diff --git a/drivers/mfd/ezx-pcap.c b/drivers/mfd/ezx-pcap.c
index 671a7ef..c1de4af 100644
--- a/drivers/mfd/ezx-pcap.c
+++ b/drivers/mfd/ezx-pcap.c
@@ -238,8 +238,10 @@
mutex_lock(&pcap->adc_mutex);
req = pcap->adc_queue[pcap->adc_head];
- if (WARN(!req, KERN_WARNING "adc irq without pending request\n"))
+ if (WARN(!req, KERN_WARNING "adc irq without pending request\n")) {
+ mutex_unlock(&pcap->adc_mutex);
return IRQ_HANDLED;
+ }
/* read requested channels results */
ezx_pcap_read(pcap, PCAP_REG_ADC, &tmp);
diff --git a/drivers/mfd/sm501.c b/drivers/mfd/sm501.c
index 4c7b796..0cc5eef 100644
--- a/drivers/mfd/sm501.c
+++ b/drivers/mfd/sm501.c
@@ -367,7 +367,8 @@
break;
default:
- return -1;
+ gate = -1;
+ goto already;
}
writel(mode, sm->regs + SM501_POWER_MODE_CONTROL);
diff --git a/drivers/misc/sgi-gru/grufile.c b/drivers/misc/sgi-gru/grufile.c
index fa2d93a..aed6098 100644
--- a/drivers/misc/sgi-gru/grufile.c
+++ b/drivers/misc/sgi-gru/grufile.c
@@ -29,7 +29,6 @@
#include <linux/slab.h>
#include <linux/mm.h>
#include <linux/io.h>
-#include <linux/smp_lock.h>
#include <linux/spinlock.h>
#include <linux/device.h>
#include <linux/miscdevice.h>
diff --git a/drivers/misc/sgi-gru/grukservices.c b/drivers/misc/sgi-gru/grukservices.c
index eedbf9c..79689b1 100644
--- a/drivers/misc/sgi-gru/grukservices.c
+++ b/drivers/misc/sgi-gru/grukservices.c
@@ -24,7 +24,6 @@
#include <linux/errno.h>
#include <linux/slab.h>
#include <linux/mm.h>
-#include <linux/smp_lock.h>
#include <linux/spinlock.h>
#include <linux/device.h>
#include <linux/miscdevice.h>
diff --git a/drivers/misc/sgi-xp/xpnet.c b/drivers/misc/sgi-xp/xpnet.c
index 8d1c60a..5d778ec 100644
--- a/drivers/misc/sgi-xp/xpnet.c
+++ b/drivers/misc/sgi-xp/xpnet.c
@@ -235,7 +235,7 @@
skb->ip_summed = CHECKSUM_UNNECESSARY;
dev_dbg(xpnet, "passing skb to network layer\n"
- KERN_DEBUG "\tskb->head=0x%p skb->data=0x%p skb->tail=0x%p "
+ "\tskb->head=0x%p skb->data=0x%p skb->tail=0x%p "
"skb->end=0x%p skb->len=%d\n",
(void *)skb->head, (void *)skb->data, skb_tail_pointer(skb),
skb_end_pointer(skb), skb->len);
@@ -399,7 +399,7 @@
msg->buf_pa = xp_pa((void *)start_addr);
dev_dbg(xpnet, "sending XPC message to %d:%d\n"
- KERN_DEBUG "msg->buf_pa=0x%lx, msg->size=%u, "
+ "msg->buf_pa=0x%lx, msg->size=%u, "
"msg->leadin_ignore=%u, msg->tailout_ignore=%u\n",
dest_partid, XPC_NET_CHANNEL, msg->buf_pa, msg->size,
msg->leadin_ignore, msg->tailout_ignore);
diff --git a/drivers/mmc/host/mmc_spi.c b/drivers/mmc/host/mmc_spi.c
index 240608c..a461017 100644
--- a/drivers/mmc/host/mmc_spi.c
+++ b/drivers/mmc/host/mmc_spi.c
@@ -1313,6 +1313,12 @@
struct mmc_spi_host *host;
int status;
+ /* We rely on full duplex transfers, mostly to reduce
+ * per-transfer overheads (by making fewer transfers).
+ */
+ if (spi->master->flags & SPI_MASTER_HALF_DUPLEX)
+ return -EINVAL;
+
/* MMC and SD specs only seem to care that sampling is on the
* rising edge ... meaning SPI modes 0 or 3. So either SPI mode
* should be legit. We'll use mode 0 since the steady state is 0,
diff --git a/drivers/mtd/cmdlinepart.c b/drivers/mtd/cmdlinepart.c
index 5011fa7..1479da6 100644
--- a/drivers/mtd/cmdlinepart.c
+++ b/drivers/mtd/cmdlinepart.c
@@ -194,7 +194,7 @@
parts[this_part].name = extra_mem;
extra_mem += name_len + 1;
- dbg(("partition %d: name <%s>, offset %x, size %x, mask flags %x\n",
+ dbg(("partition %d: name <%s>, offset %llx, size %llx, mask flags %x\n",
this_part,
parts[this_part].name,
parts[this_part].offset,
diff --git a/drivers/mtd/devices/m25p80.c b/drivers/mtd/devices/m25p80.c
index 59c4612..ae5fe91 100644
--- a/drivers/mtd/devices/m25p80.c
+++ b/drivers/mtd/devices/m25p80.c
@@ -54,7 +54,7 @@
#define SR_SRWD 0x80 /* SR write protect */
/* Define max times to check status register before we give up. */
-#define MAX_READY_WAIT_JIFFIES (10 * HZ) /* eg. M25P128 specs 6s max sector erase */
+#define MAX_READY_WAIT_JIFFIES (40 * HZ) /* M25P16 specs 40s max chip erase */
#define CMD_SIZE 4
#ifdef CONFIG_M25PXX_USE_FAST_READ
diff --git a/drivers/mtd/inftlcore.c b/drivers/mtd/inftlcore.c
index 73f0522..d8cf29c 100644
--- a/drivers/mtd/inftlcore.c
+++ b/drivers/mtd/inftlcore.c
@@ -226,7 +226,7 @@
if (!desperate && inftl->numfreeEUNs < 2) {
DEBUG(MTD_DEBUG_LEVEL1, "INFTL: there are too few free "
"EUNs (%d)\n", inftl->numfreeEUNs);
- return 0xffff;
+ return BLOCK_NIL;
}
/* Scan for a free block */
@@ -281,7 +281,8 @@
silly = MAX_LOOPS;
while (thisEUN < inftl->nb_blocks) {
for (block = 0; block < inftl->EraseSize/SECTORSIZE; block ++) {
- if ((BlockMap[block] != 0xffff) || BlockDeleted[block])
+ if ((BlockMap[block] != BLOCK_NIL) ||
+ BlockDeleted[block])
continue;
if (inftl_read_oob(mtd, (thisEUN * inftl->EraseSize)
@@ -525,7 +526,7 @@
if (!silly--) {
printk(KERN_WARNING "INFTL: infinite loop in "
"Virtual Unit Chain 0x%x\n", thisVUC);
- return 0xffff;
+ return BLOCK_NIL;
}
/* Skip to next block in chain */
@@ -549,7 +550,7 @@
* waiting to be picked up. We're going to have to fold
* a chain to make room.
*/
- thisEUN = INFTL_makefreeblock(inftl, 0xffff);
+ thisEUN = INFTL_makefreeblock(inftl, BLOCK_NIL);
/*
* Hopefully we free something, lets try again.
@@ -631,7 +632,7 @@
printk(KERN_WARNING "INFTL: error folding to make room for Virtual "
"Unit Chain 0x%x\n", thisVUC);
- return 0xffff;
+ return BLOCK_NIL;
}
/*
diff --git a/drivers/mtd/maps/integrator-flash.c b/drivers/mtd/maps/integrator-flash.c
index b08a798..2aac41b 100644
--- a/drivers/mtd/maps/integrator-flash.c
+++ b/drivers/mtd/maps/integrator-flash.c
@@ -42,10 +42,8 @@
#include <mach/hardware.h>
#include <asm/system.h>
-#define SUBDEV_NAME_SIZE (BUS_ID_SIZE + 2)
-
struct armflash_subdev_info {
- char name[SUBDEV_NAME_SIZE];
+ char *name;
struct mtd_info *mtd;
struct map_info map;
struct flash_platform_data *plat;
@@ -134,6 +132,8 @@
map_destroy(subdev->mtd);
if (subdev->map.virt)
iounmap(subdev->map.virt);
+ kfree(subdev->name);
+ subdev->name = NULL;
release_mem_region(subdev->map.phys, subdev->map.size);
}
@@ -177,16 +177,22 @@
if (nr == 1)
/* No MTD concatenation, just use the default name */
- snprintf(subdev->name, SUBDEV_NAME_SIZE, "%s",
- dev_name(&dev->dev));
+ subdev->name = kstrdup(dev_name(&dev->dev), GFP_KERNEL);
else
- snprintf(subdev->name, SUBDEV_NAME_SIZE, "%s-%d",
- dev_name(&dev->dev), i);
+ subdev->name = kasprintf(GFP_KERNEL, "%s-%d",
+ dev_name(&dev->dev), i);
+ if (!subdev->name) {
+ err = -ENOMEM;
+ break;
+ }
subdev->plat = plat;
err = armflash_subdev_probe(subdev, res);
- if (err)
+ if (err) {
+ kfree(subdev->name);
+ subdev->name = NULL;
break;
+ }
}
info->nr_subdev = i;
diff --git a/drivers/mtd/nand/atmel_nand.c b/drivers/mtd/nand/atmel_nand.c
index 2802992..20c828b 100644
--- a/drivers/mtd/nand/atmel_nand.c
+++ b/drivers/mtd/nand/atmel_nand.c
@@ -534,7 +534,7 @@
&num_partitions);
if ((!partitions) || (num_partitions == 0)) {
- printk(KERN_ERR "atmel_nand: No parititions defined, or unsupported device.\n");
+ printk(KERN_ERR "atmel_nand: No partitions defined, or unsupported device.\n");
res = ENXIO;
goto err_no_partitions;
}
diff --git a/drivers/mtd/nand/omap2.c b/drivers/mtd/nand/omap2.c
index 0cd76f8..ebd07e9 100644
--- a/drivers/mtd/nand/omap2.c
+++ b/drivers/mtd/nand/omap2.c
@@ -11,6 +11,8 @@
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
#include <linux/delay.h>
+#include <linux/jiffies.h>
+#include <linux/sched.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/nand.h>
#include <linux/mtd/partitions.h>
@@ -541,7 +543,7 @@
struct omap_nand_info *info = container_of(mtd, struct omap_nand_info,
mtd);
unsigned long timeo = jiffies;
- int status, state = this->state;
+ int status = NAND_STATUS_FAIL, state = this->state;
if (state == FL_ERASING)
timeo += (HZ * 400) / 1000;
@@ -556,8 +558,9 @@
while (time_before(jiffies, timeo)) {
status = __raw_readb(this->IO_ADDR_R);
- if (!(status & 0x40))
+ if (status & NAND_STATUS_READY)
break;
+ cond_resched();
}
return status;
}
diff --git a/drivers/mtd/nftlcore.c b/drivers/mtd/nftlcore.c
index e3f8495..fb86cac 100644
--- a/drivers/mtd/nftlcore.c
+++ b/drivers/mtd/nftlcore.c
@@ -208,7 +208,7 @@
/* Normally, we force a fold to happen before we run out of free blocks completely */
if (!desperate && nftl->numfreeEUNs < 2) {
DEBUG(MTD_DEBUG_LEVEL1, "NFTL_findfreeblock: there are too few free EUNs\n");
- return 0xffff;
+ return BLOCK_NIL;
}
/* Scan for a free block */
@@ -230,11 +230,11 @@
printk("Argh! No free blocks found! LastFreeEUN = %d, "
"FirstEUN = %d\n", nftl->LastFreeEUN,
le16_to_cpu(nftl->MediaHdr.FirstPhysicalEUN));
- return 0xffff;
+ return BLOCK_NIL;
}
} while (pot != nftl->LastFreeEUN);
- return 0xffff;
+ return BLOCK_NIL;
}
static u16 NFTL_foldchain (struct NFTLrecord *nftl, unsigned thisVUC, unsigned pendingblock )
@@ -431,7 +431,7 @@
/* add the header so that it is now a valid chain */
oob.u.a.VirtUnitNum = oob.u.a.SpareVirtUnitNum = cpu_to_le16(thisVUC);
- oob.u.a.ReplUnitNum = oob.u.a.SpareReplUnitNum = 0xffff;
+ oob.u.a.ReplUnitNum = oob.u.a.SpareReplUnitNum = BLOCK_NIL;
nftl_write_oob(mtd, (nftl->EraseSize * targetEUN) + 8,
8, &retlen, (char *)&oob.u);
@@ -515,7 +515,7 @@
if (ChainLength < 2) {
printk(KERN_WARNING "No Virtual Unit Chains available for folding. "
"Failing request\n");
- return 0xffff;
+ return BLOCK_NIL;
}
return NFTL_foldchain (nftl, LongestChain, pendingblock);
@@ -578,7 +578,7 @@
printk(KERN_WARNING
"Infinite loop in Virtual Unit Chain 0x%x\n",
thisVUC);
- return 0xffff;
+ return BLOCK_NIL;
}
/* Skip to next block in chain */
@@ -601,7 +601,7 @@
//u16 startEUN = nftl->EUNtable[thisVUC];
//printk("Write to VirtualUnitChain %d, calling makefreeblock()\n", thisVUC);
- writeEUN = NFTL_makefreeblock(nftl, 0xffff);
+ writeEUN = NFTL_makefreeblock(nftl, BLOCK_NIL);
if (writeEUN == BLOCK_NIL) {
/* OK, we accept that the above comment is
@@ -673,7 +673,7 @@
printk(KERN_WARNING "Error folding to make room for Virtual Unit Chain 0x%x\n",
thisVUC);
- return 0xffff;
+ return BLOCK_NIL;
}
static int nftl_writeblock(struct mtd_blktrans_dev *mbd, unsigned long block,
diff --git a/drivers/mtd/ubi/build.c b/drivers/mtd/ubi/build.c
index 286ed59..e1f7d0a 100644
--- a/drivers/mtd/ubi/build.c
+++ b/drivers/mtd/ubi/build.c
@@ -657,6 +657,11 @@
if (ubi->mtd->block_isbad && ubi->mtd->block_markbad)
ubi->bad_allowed = 1;
+ if (ubi->mtd->type == MTD_NORFLASH) {
+ ubi_assert(ubi->mtd->writesize == 1);
+ ubi->nor_flash = 1;
+ }
+
ubi->min_io_size = ubi->mtd->writesize;
ubi->hdrs_min_io_size = ubi->mtd->writesize >> ubi->mtd->subpage_sft;
@@ -996,6 +1001,7 @@
ubi_msg("number of PEBs reserved for bad PEB handling: %d",
ubi->beb_rsvd_pebs);
ubi_msg("max/mean erase counter: %d/%d", ubi->max_ec, ubi->mean_ec);
+ ubi_msg("image sequence number: %d", ubi->image_seq);
/*
* The below lock makes sure we do not race with 'ubi_thread()' which
diff --git a/drivers/mtd/ubi/debug.c b/drivers/mtd/ubi/debug.c
index c0ed60e..54b0186 100644
--- a/drivers/mtd/ubi/debug.c
+++ b/drivers/mtd/ubi/debug.c
@@ -44,6 +44,8 @@
be32_to_cpu(ec_hdr->vid_hdr_offset));
printk(KERN_DEBUG "\tdata_offset %d\n",
be32_to_cpu(ec_hdr->data_offset));
+ printk(KERN_DEBUG "\timage_seq %d\n",
+ be32_to_cpu(ec_hdr->image_seq));
printk(KERN_DEBUG "\thdr_crc %#08x\n",
be32_to_cpu(ec_hdr->hdr_crc));
printk(KERN_DEBUG "erase counter header hexdump:\n");
diff --git a/drivers/mtd/ubi/debug.h b/drivers/mtd/ubi/debug.h
index 13777e5..a4da7a0 100644
--- a/drivers/mtd/ubi/debug.h
+++ b/drivers/mtd/ubi/debug.h
@@ -93,6 +93,12 @@
#define UBI_IO_DEBUG 0
#endif
+#ifdef CONFIG_MTD_UBI_DEBUG_PARANOID
+int ubi_dbg_check_all_ff(struct ubi_device *ubi, int pnum, int offset, int len);
+#else
+#define ubi_dbg_check_all_ff(ubi, pnum, offset, len) 0
+#endif
+
#ifdef CONFIG_MTD_UBI_DEBUG_DISABLE_BGT
#define DBG_DISABLE_BGT 1
#else
@@ -167,6 +173,7 @@
#define ubi_dbg_is_bitflip() 0
#define ubi_dbg_is_write_failure() 0
#define ubi_dbg_is_erase_failure() 0
+#define ubi_dbg_check_all_ff(ubi, pnum, offset, len) 0
#endif /* !CONFIG_MTD_UBI_DEBUG */
#endif /* !__UBI_DEBUG_H__ */
diff --git a/drivers/mtd/ubi/io.c b/drivers/mtd/ubi/io.c
index effaff2..4cb6992 100644
--- a/drivers/mtd/ubi/io.c
+++ b/drivers/mtd/ubi/io.c
@@ -98,17 +98,12 @@
static int paranoid_check_peb_vid_hdr(const struct ubi_device *ubi, int pnum);
static int paranoid_check_vid_hdr(const struct ubi_device *ubi, int pnum,
const struct ubi_vid_hdr *vid_hdr);
-static int paranoid_check_all_ff(struct ubi_device *ubi, int pnum, int offset,
- int len);
-static int paranoid_check_empty(struct ubi_device *ubi, int pnum);
#else
#define paranoid_check_not_bad(ubi, pnum) 0
#define paranoid_check_peb_ec_hdr(ubi, pnum) 0
#define paranoid_check_ec_hdr(ubi, pnum, ec_hdr) 0
#define paranoid_check_peb_vid_hdr(ubi, pnum) 0
#define paranoid_check_vid_hdr(ubi, pnum, vid_hdr) 0
-#define paranoid_check_all_ff(ubi, pnum, offset, len) 0
-#define paranoid_check_empty(ubi, pnum) 0
#endif
/**
@@ -244,7 +239,7 @@
return err > 0 ? -EINVAL : err;
/* The area we are writing to has to contain all 0xFF bytes */
- err = paranoid_check_all_ff(ubi, pnum, offset, len);
+ err = ubi_dbg_check_all_ff(ubi, pnum, offset, len);
if (err)
return err > 0 ? -EINVAL : err;
@@ -271,8 +266,8 @@
addr = (loff_t)pnum * ubi->peb_size + offset;
err = ubi->mtd->write(ubi->mtd, addr, len, &written, buf);
if (err) {
- ubi_err("error %d while writing %d bytes to PEB %d:%d, written"
- " %zd bytes", err, len, pnum, offset, written);
+ ubi_err("error %d while writing %d bytes to PEB %d:%d, written "
+ "%zd bytes", err, len, pnum, offset, written);
ubi_dbg_dump_stack();
} else
ubi_assert(written == len);
@@ -350,7 +345,7 @@
return -EIO;
}
- err = paranoid_check_all_ff(ubi, pnum, 0, ubi->peb_size);
+ err = ubi_dbg_check_all_ff(ubi, pnum, 0, ubi->peb_size);
if (err)
return err > 0 ? -EINVAL : err;
@@ -459,6 +454,54 @@
}
/**
+ * nor_erase_prepare - prepare a NOR flash PEB for erasure.
+ * @ubi: UBI device description object
+ * @pnum: physical eraseblock number to prepare
+ *
+ * NOR flash, or at least some of them, have peculiar embedded PEB erasure
+ * algorithm: the PEB is first filled with zeroes, then it is erased. And
+ * filling with zeroes starts from the end of the PEB. This was observed with
+ * Spansion S29GL512N NOR flash.
+ *
+ * This means that in case of a power cut we may end up with intact data at the
+ * beginning of the PEB, and all zeroes at the end of PEB. In other words, the
+ * EC and VID headers are OK, but a large chunk of data at the end of PEB is
+ * zeroed. This makes UBI mistakenly treat this PEB as used and associate it
+ * with an LEB, which leads to subsequent failures (e.g., UBIFS fails).
+ *
+ * This function is called before erasing NOR PEBs and it zeroes out EC and VID
+ * magic numbers in order to invalidate them and prevent the failures. Returns
+ * zero in case of success and a negative error code in case of failure.
+ */
+static int nor_erase_prepare(struct ubi_device *ubi, int pnum)
+{
+ int err;
+ size_t written;
+ loff_t addr;
+ uint32_t data = 0;
+
+ addr = (loff_t)pnum * ubi->peb_size;
+ err = ubi->mtd->write(ubi->mtd, addr, 4, &written, (void *)&data);
+ if (err) {
+ ubi_err("error %d while writing 4 bytes to PEB %d:%d, written "
+ "%zd bytes", err, pnum, 0, written);
+ ubi_dbg_dump_stack();
+ return err;
+ }
+
+ addr += ubi->vid_hdr_aloffset;
+ err = ubi->mtd->write(ubi->mtd, addr, 4, &written, (void *)&data);
+ if (err) {
+ ubi_err("error %d while writing 4 bytes to PEB %d:%d, written "
+ "%zd bytes", err, pnum, ubi->vid_hdr_aloffset, written);
+ ubi_dbg_dump_stack();
+ return err;
+ }
+
+ return 0;
+}
+
+/**
* ubi_io_sync_erase - synchronously erase a physical eraseblock.
* @ubi: UBI device description object
* @pnum: physical eraseblock number to erase
@@ -489,6 +532,12 @@
return -EROFS;
}
+ if (ubi->nor_flash) {
+ err = nor_erase_prepare(ubi, pnum);
+ if (err)
+ return err;
+ }
+
if (torture) {
ret = torture_peb(ubi, pnum);
if (ret < 0)
@@ -672,11 +721,6 @@
if (read_err != -EBADMSG &&
check_pattern(ec_hdr, 0xFF, UBI_EC_HDR_SIZE)) {
/* The physical eraseblock is supposedly empty */
- err = paranoid_check_all_ff(ubi, pnum, 0,
- ubi->peb_size);
- if (err)
- return err > 0 ? UBI_IO_BAD_EC_HDR : err;
-
if (verbose)
ubi_warn("no EC header found at PEB %d, "
"only 0xFF bytes", pnum);
@@ -752,6 +796,7 @@
ec_hdr->version = UBI_VERSION;
ec_hdr->vid_hdr_offset = cpu_to_be32(ubi->vid_hdr_offset);
ec_hdr->data_offset = cpu_to_be32(ubi->leb_start);
+ ec_hdr->image_seq = cpu_to_be32(ubi->image_seq);
crc = crc32(UBI_CRC32_INIT, ec_hdr, UBI_EC_HDR_SIZE_CRC);
ec_hdr->hdr_crc = cpu_to_be32(crc);
@@ -947,15 +992,6 @@
if (read_err != -EBADMSG &&
check_pattern(vid_hdr, 0xFF, UBI_VID_HDR_SIZE)) {
/* The physical eraseblock is supposedly free */
-
- /*
- * The below is just a paranoid check, it has to be
- * compiled out if paranoid checks are disabled.
- */
- err = paranoid_check_empty(ubi, pnum);
- if (err)
- return err > 0 ? UBI_IO_BAD_VID_HDR : err;
-
if (verbose)
ubi_warn("no VID header found at PEB %d, "
"only 0xFF bytes", pnum);
@@ -1229,7 +1265,7 @@
}
/**
- * paranoid_check_all_ff - check that a region of flash is empty.
+ * ubi_dbg_check_all_ff - check that a region of flash is empty.
* @ubi: UBI device description object
* @pnum: the physical eraseblock number to check
* @offset: the starting offset within the physical eraseblock to check
@@ -1239,8 +1275,7 @@
* @offset of the physical eraseblock @pnum, %1 if not, and a negative error
* code if an error occurred.
*/
-static int paranoid_check_all_ff(struct ubi_device *ubi, int pnum, int offset,
- int len)
+int ubi_dbg_check_all_ff(struct ubi_device *ubi, int pnum, int offset, int len)
{
size_t read;
int err;
@@ -1276,74 +1311,4 @@
return err;
}
-/**
- * paranoid_check_empty - whether a PEB is empty.
- * @ubi: UBI device description object
- * @pnum: the physical eraseblock number to check
- *
- * This function makes sure PEB @pnum is empty, which means it contains only
- * %0xFF data bytes. Returns zero if the PEB is empty, %1 if not, and a
- * negative error code in case of failure.
- *
- * Empty PEBs have the EC header, and do not have the VID header. The caller of
- * this function should have already made sure the PEB does not have the VID
- * header. However, this function re-checks that, because it is possible that
- * the header and data has already been written to the PEB.
- *
- * Let's consider a possible scenario. Suppose there are 2 tasks - A and B.
- * Task A is in 'wear_leveling_worker()'. It is reading VID header of PEB X to
- * find which LEB it corresponds to. PEB X is currently unmapped, and has no
- * VID header. Task B is trying to write to PEB X.
- *
- * Task A: in 'ubi_io_read_vid_hdr()': reads the VID header from PEB X. The
- * read data contain all 0xFF bytes;
- * Task B: writes VID header and some data to PEB X;
- * Task A: assumes PEB X is empty, calls 'paranoid_check_empty()'. And if we
- * do not re-read the VID header, and do not cancel the checking if it
- * is there, we fail.
- */
-static int paranoid_check_empty(struct ubi_device *ubi, int pnum)
-{
- int err, offs = ubi->vid_hdr_aloffset, len = ubi->vid_hdr_alsize;
- size_t read;
- uint32_t magic;
- const struct ubi_vid_hdr *vid_hdr;
-
- mutex_lock(&ubi->dbg_buf_mutex);
- err = ubi->mtd->read(ubi->mtd, offs, len, &read, ubi->dbg_peb_buf);
- if (err && err != -EUCLEAN) {
- ubi_err("error %d while reading %d bytes from PEB %d:%d, "
- "read %zd bytes", err, len, pnum, offs, read);
- goto error;
- }
-
- vid_hdr = ubi->dbg_peb_buf;
- magic = be32_to_cpu(vid_hdr->magic);
- if (magic == UBI_VID_HDR_MAGIC)
- /* The PEB contains VID header, so it is not empty */
- goto out;
-
- err = check_pattern(ubi->dbg_peb_buf, 0xFF, len);
- if (err == 0) {
- ubi_err("flash region at PEB %d:%d, length %d does not "
- "contain all 0xFF bytes", pnum, offs, len);
- goto fail;
- }
-
-out:
- mutex_unlock(&ubi->dbg_buf_mutex);
- return 0;
-
-fail:
- ubi_err("paranoid check failed for PEB %d", pnum);
- ubi_msg("hex dump of the %d-%d region", offs, offs + len);
- print_hex_dump(KERN_DEBUG, "", DUMP_PREFIX_OFFSET, 32, 1,
- ubi->dbg_peb_buf, len, 1);
- err = 1;
-error:
- ubi_dbg_dump_stack();
- mutex_unlock(&ubi->dbg_buf_mutex);
- return err;
-}
-
#endif /* CONFIG_MTD_UBI_DEBUG_PARANOID */
diff --git a/drivers/mtd/ubi/scan.c b/drivers/mtd/ubi/scan.c
index c3d653b..f60895e 100644
--- a/drivers/mtd/ubi/scan.c
+++ b/drivers/mtd/ubi/scan.c
@@ -757,6 +757,8 @@
si->is_empty = 0;
if (!ec_corr) {
+ int image_seq;
+
/* Make sure UBI version is OK */
if (ech->version != UBI_VERSION) {
ubi_err("this UBI version is %d, image version is %d",
@@ -778,6 +780,18 @@
ubi_dbg_dump_ec_hdr(ech);
return -EINVAL;
}
+
+ image_seq = be32_to_cpu(ech->ec);
+ if (!si->image_seq_set) {
+ ubi->image_seq = image_seq;
+ si->image_seq_set = 1;
+ } else if (ubi->image_seq != image_seq) {
+ ubi_err("bad image sequence number %d in PEB %d, "
+ "expected %d", image_seq, pnum, ubi->image_seq);
+ ubi_dbg_dump_ec_hdr(ech);
+ return -EINVAL;
+ }
+
}
/* OK, we've done with the EC header, let's look at the VID header */
diff --git a/drivers/mtd/ubi/scan.h b/drivers/mtd/ubi/scan.h
index 61df208..1017cf1 100644
--- a/drivers/mtd/ubi/scan.h
+++ b/drivers/mtd/ubi/scan.h
@@ -102,6 +102,7 @@
* @mean_ec: mean erase counter value
* @ec_sum: a temporary variable used when calculating @mean_ec
* @ec_count: a temporary variable used when calculating @mean_ec
+ * @image_seq_set: indicates @ubi->image_seq is known
*
* This data structure contains the result of scanning and may be used by other
* UBI sub-systems to build final UBI data structures, further error-recovery
@@ -124,6 +125,7 @@
int mean_ec;
uint64_t ec_sum;
int ec_count;
+ int image_seq_set;
};
struct ubi_device;
diff --git a/drivers/mtd/ubi/ubi-media.h b/drivers/mtd/ubi/ubi-media.h
index 8419fdc..503ea9b 100644
--- a/drivers/mtd/ubi/ubi-media.h
+++ b/drivers/mtd/ubi/ubi-media.h
@@ -129,6 +129,7 @@
* @ec: the erase counter
* @vid_hdr_offset: where the VID header starts
* @data_offset: where the user data start
+ * @image_seq: image sequence number
* @padding2: reserved for future, zeroes
* @hdr_crc: erase counter header CRC checksum
*
@@ -144,6 +145,14 @@
* volume identifier header and user data, relative to the beginning of the
* physical eraseblock. These values have to be the same for all physical
* eraseblocks.
+ *
+ * The @image_seq field is used to validate a UBI image that has been prepared
+ * for a UBI device. The @image_seq value can be any value, but it must be the
+ * same on all eraseblocks. UBI will ensure that all new erase counter headers
+ * also contain this value, and will check the value when scanning at start-up.
+ * One way to make use of @image_seq is to increase its value by one every time
+ * an image is flashed over an existing image, then, if the flashing does not
+ * complete, UBI will detect the error when scanning.
*/
struct ubi_ec_hdr {
__be32 magic;
@@ -152,7 +161,8 @@
__be64 ec; /* Warning: the current limit is 31-bit anyway! */
__be32 vid_hdr_offset;
__be32 data_offset;
- __u8 padding2[36];
+ __be32 image_seq;
+ __u8 padding2[32];
__be32 hdr_crc;
} __attribute__ ((packed));
diff --git a/drivers/mtd/ubi/ubi.h b/drivers/mtd/ubi/ubi.h
index 28acd13..6a5fe96 100644
--- a/drivers/mtd/ubi/ubi.h
+++ b/drivers/mtd/ubi/ubi.h
@@ -301,6 +301,7 @@
* @vol->readers, @vol->writers, @vol->exclusive,
* @vol->ref_count, @vol->mapping and @vol->eba_tbl.
* @ref_count: count of references on the UBI device
+ * @image_seq: image sequence number recorded on EC headers
*
* @rsvd_pebs: count of reserved physical eraseblocks
* @avail_pebs: count of available physical eraseblocks
@@ -372,6 +373,7 @@
* @vid_hdr_shift: contains @vid_hdr_offset - @vid_hdr_aloffset
* @bad_allowed: whether the MTD device admits of bad physical eraseblocks or
* not
+ * @nor_flash: non-zero if working on top of NOR flash
* @mtd: MTD device descriptor
*
* @peb_buf1: a buffer of PEB size used for different purposes
@@ -390,6 +392,7 @@
struct ubi_volume *volumes[UBI_MAX_VOLUMES+UBI_INT_VOL_COUNT];
spinlock_t volumes_lock;
int ref_count;
+ int image_seq;
int rsvd_pebs;
int avail_pebs;
@@ -452,7 +455,8 @@
int vid_hdr_offset;
int vid_hdr_aloffset;
int vid_hdr_shift;
- int bad_allowed;
+ unsigned int bad_allowed:1;
+ unsigned int nor_flash:1;
struct mtd_info *mtd;
void *peb_buf1;
diff --git a/drivers/mtd/ubi/wl.c b/drivers/mtd/ubi/wl.c
index 2b24723..600c722 100644
--- a/drivers/mtd/ubi/wl.c
+++ b/drivers/mtd/ubi/wl.c
@@ -459,6 +459,14 @@
dbg_wl("PEB %d EC %d", e->pnum, e->ec);
prot_queue_add(ubi, e);
spin_unlock(&ubi->wl_lock);
+
+ err = ubi_dbg_check_all_ff(ubi, e->pnum, ubi->vid_hdr_aloffset,
+ ubi->peb_size - ubi->vid_hdr_aloffset);
+ if (err) {
+ ubi_err("new PEB %d does not contain all 0xFF bytes", e->pnum);
+ return err > 0 ? -EINVAL : err;
+ }
+
return e->pnum;
}
diff --git a/drivers/net/a2065.c b/drivers/net/a2065.c
index 85a1817..08787f5 100644
--- a/drivers/net/a2065.c
+++ b/drivers/net/a2065.c
@@ -569,16 +569,8 @@
#ifdef DEBUG_DRIVER
/* dump the packet */
- {
- int i;
-
- for (i = 0; i < 64; i++) {
- if ((i % 16) == 0)
- printk("\n" KERN_DEBUG);
- printk ("%2.2x ", skb->data [i]);
- }
- printk("\n");
- }
+ print_hex_dump(KERN_DEBUG, "skb->data: ", DUMP_PREFIX_NONE,
+ 16, 1, skb->data, 64, true);
#endif
entry = lp->tx_new & lp->tx_ring_mod_mask;
ib->btx_ring [entry].length = (-skblen) | 0xf000;
diff --git a/drivers/net/arcnet/arcnet.c b/drivers/net/arcnet/arcnet.c
index d6d4ab3..7d227cda 100644
--- a/drivers/net/arcnet/arcnet.c
+++ b/drivers/net/arcnet/arcnet.c
@@ -158,15 +158,12 @@
void arcnet_dump_skb(struct net_device *dev,
struct sk_buff *skb, char *desc)
{
- int i;
+ char hdr[32];
- printk(KERN_DEBUG "%6s: skb dump (%s) follows:", dev->name, desc);
- for (i = 0; i < skb->len; i++) {
- if (i % 16 == 0)
- printk("\n" KERN_DEBUG "[%04X] ", i);
- printk("%02X ", ((u_char *) skb->data)[i]);
- }
- printk("\n");
+ /* dump the packet */
+ snprintf(hdr, sizeof(hdr), "%6s:%s skb->data:", dev->name, desc);
+ print_hex_dump(KERN_DEBUG, hdr, DUMP_PREFIX_OFFSET,
+ 16, 1, skb->data, skb->len, true);
}
EXPORT_SYMBOL(arcnet_dump_skb);
@@ -184,6 +181,7 @@
int i, length;
unsigned long flags = 0;
static uint8_t buf[512];
+ char hdr[32];
/* hw.copy_from_card expects IRQ context so take the IRQ lock
to keep it single threaded */
@@ -197,14 +195,10 @@
/* if the offset[0] byte is nonzero, this is a 256-byte packet */
length = (buf[2] ? 256 : 512);
- printk(KERN_DEBUG "%6s: packet dump (%s) follows:", dev->name, desc);
- for (i = 0; i < length; i++) {
- if (i % 16 == 0)
- printk("\n" KERN_DEBUG "[%04X] ", i);
- printk("%02X ", buf[i]);
- }
- printk("\n");
-
+ /* dump the packet */
+ snprintf(hdr, sizeof(hdr), "%6s:%s packet dump:", dev->name, desc);
+ print_hex_dump(KERN_DEBUG, hdr, DUMP_PREFIX_OFFSET,
+ 16, 1, buf, length, true);
}
#else
diff --git a/drivers/net/atl1c/atl1c_ethtool.c b/drivers/net/atl1c/atl1c_ethtool.c
index e4afbd6..607007d 100644
--- a/drivers/net/atl1c/atl1c_ethtool.c
+++ b/drivers/net/atl1c/atl1c_ethtool.c
@@ -281,6 +281,8 @@
if (wol->wolopts & WAKE_PHY)
adapter->wol |= AT_WUFC_LNKC;
+ device_set_wakeup_enable(&adapter->pdev->dev, adapter->wol);
+
return 0;
}
diff --git a/drivers/net/atl1e/atl1e_ethtool.c b/drivers/net/atl1e/atl1e_ethtool.c
index 619c658..4003955 100644
--- a/drivers/net/atl1e/atl1e_ethtool.c
+++ b/drivers/net/atl1e/atl1e_ethtool.c
@@ -365,6 +365,8 @@
if (wol->wolopts & WAKE_PHY)
adapter->wol |= AT_WUFC_LNKC;
+ device_set_wakeup_enable(&adapter->pdev->dev, adapter->wol);
+
return 0;
}
diff --git a/drivers/net/benet/be.h b/drivers/net/benet/be.h
index f703758..5b4bf3d 100644
--- a/drivers/net/benet/be.h
+++ b/drivers/net/benet/be.h
@@ -73,7 +73,7 @@
#define RX_FRAGS_REFILL_WM (RX_Q_LEN - MAX_RX_POST)
#define BE_MAX_LRO_DESCRIPTORS 16
-#define BE_MAX_FRAGS_PER_FRAME 16
+#define BE_MAX_FRAGS_PER_FRAME (min((u32) 16, (u32) MAX_SKB_FRAGS))
struct be_dma_mem {
void *va;
diff --git a/drivers/net/benet/be_ethtool.c b/drivers/net/benet/be_ethtool.c
index 9592f22..cccc541 100644
--- a/drivers/net/benet/be_ethtool.c
+++ b/drivers/net/benet/be_ethtool.c
@@ -162,8 +162,8 @@
return -EINVAL;
adapter->max_rx_coal = coalesce->rx_max_coalesced_frames;
- if (adapter->max_rx_coal > MAX_SKB_FRAGS)
- adapter->max_rx_coal = MAX_SKB_FRAGS - 1;
+ if (adapter->max_rx_coal > BE_MAX_FRAGS_PER_FRAME)
+ adapter->max_rx_coal = BE_MAX_FRAGS_PER_FRAME;
/* if AIC is being turned on now, start with an EQD of 0 */
if (rx_eq->enable_aic == 0 &&
diff --git a/drivers/net/benet/be_hw.h b/drivers/net/benet/be_hw.h
index b02e805..29c33c7 100644
--- a/drivers/net/benet/be_hw.h
+++ b/drivers/net/benet/be_hw.h
@@ -55,6 +55,10 @@
#define MEMBAR_CTRL_INT_CTRL_PFUNC_MASK 0x7 /* bits 26 - 28 */
#define MEMBAR_CTRL_INT_CTRL_PFUNC_SHIFT 26
+/********* ISR0 Register offset **********/
+#define CEV_ISR0_OFFSET 0xC18
+#define CEV_ISR_SIZE 4
+
/********* Event Q door bell *************/
#define DB_EQ_OFFSET DB_CQ_OFFSET
#define DB_EQ_RING_ID_MASK 0x1FF /* bits 0 - 8 */
diff --git a/drivers/net/benet/be_main.c b/drivers/net/benet/be_main.c
index 66c10c8..c43f6a1 100644
--- a/drivers/net/benet/be_main.c
+++ b/drivers/net/benet/be_main.c
@@ -666,7 +666,7 @@
{
struct be_queue_info *rxq = &adapter->rx_obj.q;
struct be_rx_page_info *page_info;
- u16 rxq_idx, i, num_rcvd;
+ u16 rxq_idx, i, num_rcvd, j;
u32 pktsize, hdr_len, curr_frag_len;
u8 *start;
@@ -709,22 +709,33 @@
/* More frags present for this completion */
pktsize -= curr_frag_len; /* account for above copied frag */
- for (i = 1; i < num_rcvd; i++) {
+ for (i = 1, j = 0; i < num_rcvd; i++) {
index_inc(&rxq_idx, rxq->len);
page_info = get_rx_page_info(adapter, rxq_idx);
curr_frag_len = min(pktsize, rx_frag_size);
- skb_shinfo(skb)->frags[i].page = page_info->page;
- skb_shinfo(skb)->frags[i].page_offset = page_info->page_offset;
- skb_shinfo(skb)->frags[i].size = curr_frag_len;
+ /* Coalesce all frags from the same physical page in one slot */
+ if (page_info->page_offset == 0) {
+ /* Fresh page */
+ j++;
+ skb_shinfo(skb)->frags[j].page = page_info->page;
+ skb_shinfo(skb)->frags[j].page_offset =
+ page_info->page_offset;
+ skb_shinfo(skb)->frags[j].size = 0;
+ skb_shinfo(skb)->nr_frags++;
+ } else {
+ put_page(page_info->page);
+ }
+
+ skb_shinfo(skb)->frags[j].size += curr_frag_len;
skb->len += curr_frag_len;
skb->data_len += curr_frag_len;
- skb_shinfo(skb)->nr_frags++;
pktsize -= curr_frag_len;
memset(page_info, 0, sizeof(*page_info));
}
+ BUG_ON(j > MAX_SKB_FRAGS);
done:
be_rx_stats_update(adapter, pktsize, num_rcvd);
@@ -786,7 +797,7 @@
struct skb_frag_struct rx_frags[BE_MAX_FRAGS_PER_FRAME];
struct be_queue_info *rxq = &adapter->rx_obj.q;
u32 num_rcvd, pkt_size, remaining, vlanf, curr_frag_len;
- u16 i, rxq_idx = 0, vid;
+ u16 i, rxq_idx = 0, vid, j;
num_rcvd = AMAP_GET_BITS(struct amap_eth_rx_compl, numfrags, rxcp);
pkt_size = AMAP_GET_BITS(struct amap_eth_rx_compl, pktsize, rxcp);
@@ -794,20 +805,28 @@
rxq_idx = AMAP_GET_BITS(struct amap_eth_rx_compl, fragndx, rxcp);
remaining = pkt_size;
- for (i = 0; i < num_rcvd; i++) {
+ for (i = 0, j = -1; i < num_rcvd; i++) {
page_info = get_rx_page_info(adapter, rxq_idx);
curr_frag_len = min(remaining, rx_frag_size);
- rx_frags[i].page = page_info->page;
- rx_frags[i].page_offset = page_info->page_offset;
- rx_frags[i].size = curr_frag_len;
+ /* Coalesce all frags from the same physical page in one slot */
+ if (i == 0 || page_info->page_offset == 0) {
+ /* First frag or Fresh page */
+ j++;
+ rx_frags[j].page = page_info->page;
+ rx_frags[j].page_offset = page_info->page_offset;
+ rx_frags[j].size = 0;
+ } else {
+ put_page(page_info->page);
+ }
+ rx_frags[j].size += curr_frag_len;
+
remaining -= curr_frag_len;
-
index_inc(&rxq_idx, rxq->len);
-
memset(page_info, 0, sizeof(*page_info));
}
+ BUG_ON(j > MAX_SKB_FRAGS);
if (likely(!vlanf)) {
lro_receive_frags(&adapter->rx_obj.lro_mgr, rx_frags, pkt_size,
@@ -1255,15 +1274,17 @@
{
struct be_adapter *adapter = dev;
struct be_ctrl_info *ctrl = &adapter->ctrl;
- int rx, tx;
+ int isr;
- tx = event_handle(ctrl, &adapter->tx_eq);
- rx = event_handle(ctrl, &adapter->rx_eq);
+ isr = ioread32(ctrl->csr + CEV_ISR0_OFFSET +
+ ctrl->pci_func * CEV_ISR_SIZE);
+ if (!isr)
+ return IRQ_NONE;
- if (rx || tx)
- return IRQ_HANDLED;
- else
- return IRQ_NONE;
+ event_handle(ctrl, &adapter->tx_eq);
+ event_handle(ctrl, &adapter->rx_eq);
+
+ return IRQ_HANDLED;
}
static irqreturn_t be_msix_rx(int irq, void *dev)
diff --git a/drivers/net/bmac.c b/drivers/net/bmac.c
index 9578a3d..206144f 100644
--- a/drivers/net/bmac.c
+++ b/drivers/net/bmac.c
@@ -428,10 +428,11 @@
printk(KERN_DEBUG "phy registers:");
for (addr = 0; addr < 32; ++addr) {
if ((addr & 7) == 0)
- printk("\n" KERN_DEBUG);
- printk(" %.4x", bmac_mif_read(dev, addr));
+ printk(KERN_DEBUG);
+ printk(KERN_CONT " %.4x", bmac_mif_read(dev, addr));
}
- printk("\n");
+ printk(KERN_CONT "\n");
+
if (bp->is_bmac_plus) {
unsigned int capable, ctrl;
diff --git a/drivers/net/bnx2x.h b/drivers/net/bnx2x.h
index 86784578..85a737c 100644
--- a/drivers/net/bnx2x.h
+++ b/drivers/net/bnx2x.h
@@ -902,6 +902,8 @@
u16 rx_quick_cons_trip;
u16 rx_ticks_int;
u16 rx_ticks;
+/* Maximal coalescing timeout in us */
+#define BNX2X_MAX_COALESCE_TOUT (0xf0*12)
u32 lin_cnt;
diff --git a/drivers/net/bnx2x_main.c b/drivers/net/bnx2x_main.c
index fbf1352..c36a5f3 100644
--- a/drivers/net/bnx2x_main.c
+++ b/drivers/net/bnx2x_main.c
@@ -484,8 +484,9 @@
mark = REG_RD(bp, MCP_REG_MCPR_SCRATCH + 0xf104);
mark = ((mark + 0x3) & ~0x3);
- printk(KERN_ERR PFX "begin fw dump (mark 0x%x)\n" KERN_ERR, mark);
+ printk(KERN_ERR PFX "begin fw dump (mark 0x%x)\n", mark);
+ printk(KERN_ERR PFX);
for (offset = mark - 0x08000000; offset <= 0xF900; offset += 0x8*4) {
for (word = 0; word < 8; word++)
data[word] = htonl(REG_RD(bp, MCP_REG_MCPR_SCRATCH +
@@ -500,7 +501,7 @@
data[8] = 0x0;
printk(KERN_CONT "%s", (char *)data);
}
- printk("\n" KERN_ERR PFX "end of fw dump\n");
+ printk(KERN_ERR PFX "end of fw dump\n");
}
static void bnx2x_panic_dump(struct bnx2x *bp)
@@ -4434,7 +4435,7 @@
REG_WR16(bp, BAR_USTRORM_INTMEM +
USTORM_SB_HC_DISABLE_OFFSET(port, sb_id,
U_SB_ETH_RX_CQ_INDEX),
- bp->rx_ticks ? 0 : 1);
+ (bp->rx_ticks/12) ? 0 : 1);
/* HC_INDEX_C_ETH_TX_CQ_CONS */
REG_WR8(bp, BAR_CSTRORM_INTMEM +
@@ -4444,7 +4445,7 @@
REG_WR16(bp, BAR_CSTRORM_INTMEM +
CSTORM_SB_HC_DISABLE_OFFSET(port, sb_id,
C_SB_ETH_TX_CQ_INDEX),
- bp->tx_ticks ? 0 : 1);
+ (bp->tx_ticks/12) ? 0 : 1);
}
}
@@ -7354,7 +7355,7 @@
#ifdef BNX2X_STOP_ON_ERROR
BNX2X_ERR("reset task called but STOP_ON_ERROR defined"
" so reset not done to allow debug dump,\n"
- KERN_ERR " you will need to reboot when done\n");
+ " you will need to reboot when done\n");
return;
#endif
@@ -8637,6 +8638,14 @@
return 0;
}
+static u32
+bnx2x_get_link(struct net_device *dev)
+{
+ struct bnx2x *bp = netdev_priv(dev);
+
+ return bp->link_vars.link_up;
+}
+
static int bnx2x_get_eeprom_len(struct net_device *dev)
{
struct bnx2x *bp = netdev_priv(dev);
@@ -9061,12 +9070,12 @@
struct bnx2x *bp = netdev_priv(dev);
bp->rx_ticks = (u16) coal->rx_coalesce_usecs;
- if (bp->rx_ticks > 3000)
- bp->rx_ticks = 3000;
+ if (bp->rx_ticks > BNX2X_MAX_COALESCE_TOUT)
+ bp->rx_ticks = BNX2X_MAX_COALESCE_TOUT;
bp->tx_ticks = (u16) coal->tx_coalesce_usecs;
- if (bp->tx_ticks > 0x3000)
- bp->tx_ticks = 0x3000;
+ if (bp->tx_ticks > BNX2X_MAX_COALESCE_TOUT)
+ bp->tx_ticks = BNX2X_MAX_COALESCE_TOUT;
if (netif_running(dev))
bnx2x_update_coalesce(bp);
@@ -10034,7 +10043,7 @@
.get_msglevel = bnx2x_get_msglevel,
.set_msglevel = bnx2x_set_msglevel,
.nway_reset = bnx2x_nway_reset,
- .get_link = ethtool_op_get_link,
+ .get_link = bnx2x_get_link,
.get_eeprom_len = bnx2x_get_eeprom_len,
.get_eeprom = bnx2x_get_eeprom,
.set_eeprom = bnx2x_set_eeprom,
diff --git a/drivers/net/cpmac.c b/drivers/net/cpmac.c
index 58afafb..fd5e32c 100644
--- a/drivers/net/cpmac.c
+++ b/drivers/net/cpmac.c
@@ -1097,7 +1097,7 @@
.ndo_start_xmit = cpmac_start_xmit,
.ndo_tx_timeout = cpmac_tx_timeout,
.ndo_set_multicast_list = cpmac_set_multicast_list,
- .ndo_so_ioctl = cpmac_ioctl,
+ .ndo_do_ioctl = cpmac_ioctl,
.ndo_set_config = cpmac_config,
.ndo_change_mtu = eth_change_mtu,
.ndo_validate_addr = eth_validate_addr,
diff --git a/drivers/net/cxgb3/cxgb3_main.c b/drivers/net/cxgb3/cxgb3_main.c
index 538dda4..fb5df5c 100644
--- a/drivers/net/cxgb3/cxgb3_main.c
+++ b/drivers/net/cxgb3/cxgb3_main.c
@@ -642,8 +642,7 @@
struct port_info *pi = netdev_priv(dev);
pi->qs = &adap->sge.qs[pi->first_qset];
- for (j = pi->first_qset; j < pi->first_qset + pi->nqsets;
- ++j, ++qset_idx) {
+ for (j = 0; j < pi->nqsets; ++j, ++qset_idx) {
set_qset_lro(dev, qset_idx, pi->rx_offload & T3_LRO);
err = t3_sge_alloc_qset(adap, qset_idx, 1,
(adap->flags & USING_MSIX) ? qset_idx + 1 :
diff --git a/drivers/net/davinci_emac.c b/drivers/net/davinci_emac.c
index 2df8fb0a..12fd446 100644
--- a/drivers/net/davinci_emac.c
+++ b/drivers/net/davinci_emac.c
@@ -1820,11 +1820,19 @@
struct device *emac_dev = &priv->ndev->dev;
struct sockaddr *sa = addr;
+ if (!is_valid_ether_addr(sa->sa_data))
+ return -EINVAL;
+
/* Store mac addr in priv and rx channel and set it in EMAC hw */
memcpy(priv->mac_addr, sa->sa_data, ndev->addr_len);
- memcpy(rxch->mac_addr, sa->sa_data, ndev->addr_len);
memcpy(ndev->dev_addr, sa->sa_data, ndev->addr_len);
- emac_setmac(priv, EMAC_DEF_RX_CH, rxch->mac_addr);
+
+ /* If the interface is down - rxch is NULL. */
+ /* MAC address is configured only after the interface is enabled. */
+ if (netif_running(ndev)) {
+ memcpy(rxch->mac_addr, sa->sa_data, ndev->addr_len);
+ emac_setmac(priv, EMAC_DEF_RX_CH, rxch->mac_addr);
+ }
if (netif_msg_drv(priv))
dev_notice(emac_dev, "DaVinci EMAC: emac_dev_setmac_addr %pM\n",
diff --git a/drivers/net/dl2k.c b/drivers/net/dl2k.c
index 895d721..4b6a219 100644
--- a/drivers/net/dl2k.c
+++ b/drivers/net/dl2k.c
@@ -268,8 +268,9 @@
printk(KERN_INFO "tx_coalesce:\t%d packets\n",
tx_coalesce);
if (np->coalesce)
- printk(KERN_INFO "rx_coalesce:\t%d packets\n"
- KERN_INFO "rx_timeout: \t%d ns\n",
+ printk(KERN_INFO
+ "rx_coalesce:\t%d packets\n"
+ "rx_timeout: \t%d ns\n",
np->rx_coalesce, np->rx_timeout*640);
if (np->vlan)
printk(KERN_INFO "vlan(id):\t%d\n", np->vlan);
@@ -1522,9 +1523,9 @@
printk (KERN_INFO "Operating at 10 Mbps, ");
}
if (bmcr & MII_BMCR_DUPLEX_MODE) {
- printk ("Full duplex\n");
+ printk (KERN_CONT "Full duplex\n");
} else {
- printk ("Half duplex\n");
+ printk (KERN_CONT "Half duplex\n");
}
}
if (np->tx_flow)
@@ -1614,9 +1615,9 @@
}
if (np->full_duplex) {
bmcr |= MII_BMCR_DUPLEX_MODE;
- printk ("Full duplex\n");
+ printk (KERN_CONT "Full duplex\n");
} else {
- printk ("Half duplex\n");
+ printk (KERN_CONT "Half duplex\n");
}
#if 0
/* Set 1000BaseT Master/Slave setting */
@@ -1669,9 +1670,9 @@
__u16 bmcr = mii_read (dev, phy_addr, PCS_BMCR);
printk (KERN_INFO "Operating at 1000 Mbps, ");
if (bmcr & MII_BMCR_DUPLEX_MODE) {
- printk ("Full duplex\n");
+ printk (KERN_CONT "Full duplex\n");
} else {
- printk ("Half duplex\n");
+ printk (KERN_CONT "Half duplex\n");
}
}
if (np->tx_flow)
diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c
index 5e3356f..5b8cbdb 100644
--- a/drivers/net/e1000/e1000_main.c
+++ b/drivers/net/e1000/e1000_main.c
@@ -2185,12 +2185,16 @@
/* Free all the Rx ring sk_buffs */
for (i = 0; i < rx_ring->count; i++) {
buffer_info = &rx_ring->buffer_info[i];
- if (buffer_info->skb) {
+ if (buffer_info->dma) {
pci_unmap_single(pdev,
buffer_info->dma,
buffer_info->length,
PCI_DMA_FROMDEVICE);
+ }
+ buffer_info->dma = 0;
+
+ if (buffer_info->skb) {
dev_kfree_skb(buffer_info->skb);
buffer_info->skb = NULL;
}
@@ -4033,6 +4037,7 @@
buffer_info->dma,
buffer_info->length,
PCI_DMA_FROMDEVICE);
+ buffer_info->dma = 0;
length = le16_to_cpu(rx_desc->length);
/* !EOP means multiple descriptors were used to store a single
@@ -4222,6 +4227,7 @@
pci_unmap_single(pdev, buffer_info->dma,
adapter->rx_buffer_len,
PCI_DMA_FROMDEVICE);
+ buffer_info->dma = 0;
break; /* while !buffer_info->skb */
}
@@ -4817,6 +4823,9 @@
netif_device_detach(netdev);
+ if (state == pci_channel_io_perm_failure)
+ return PCI_ERS_RESULT_DISCONNECT;
+
if (netif_running(netdev))
e1000_down(adapter);
pci_disable_device(pdev);
diff --git a/drivers/net/e1000e/defines.h b/drivers/net/e1000e/defines.h
index 8890c97..c0f185b 100644
--- a/drivers/net/e1000e/defines.h
+++ b/drivers/net/e1000e/defines.h
@@ -238,6 +238,7 @@
#define E1000_STATUS_SPEED_100 0x00000040 /* Speed 100Mb/s */
#define E1000_STATUS_SPEED_1000 0x00000080 /* Speed 1000Mb/s */
#define E1000_STATUS_LAN_INIT_DONE 0x00000200 /* Lan Init Completion by NVM */
+#define E1000_STATUS_PHYRA 0x00000400 /* PHY Reset Asserted */
#define E1000_STATUS_GIO_MASTER_ENABLE 0x00080000 /* Status of Master requests. */
/* Constants used to interpret the masked PCI-X bus speed. */
@@ -575,6 +576,8 @@
#define PHY_1000T_STATUS 0x0A /* 1000Base-T Status Reg */
#define PHY_EXT_STATUS 0x0F /* Extended Status Reg */
+#define PHY_CONTROL_LB 0x4000 /* PHY Loopback bit */
+
/* NVM Control */
#define E1000_EECD_SK 0x00000001 /* NVM Clock */
#define E1000_EECD_CS 0x00000002 /* NVM Chip Select */
diff --git a/drivers/net/e1000e/hw.h b/drivers/net/e1000e/hw.h
index 163c1c0..fd44d9f 100644
--- a/drivers/net/e1000e/hw.h
+++ b/drivers/net/e1000e/hw.h
@@ -215,6 +215,7 @@
E1000_SWSM = 0x05B50, /* SW Semaphore */
E1000_FWSM = 0x05B54, /* FW Semaphore */
E1000_SWSM2 = 0x05B58, /* Driver-only SW semaphore */
+ E1000_CRC_OFFSET = 0x05F50, /* CRC Offset register */
E1000_HICR = 0x08F00, /* Host Interface Control */
};
@@ -302,6 +303,9 @@
#define E1000_KMRNCTRLSTA_REN 0x00200000
#define E1000_KMRNCTRLSTA_DIAG_OFFSET 0x3 /* Kumeran Diagnostic */
#define E1000_KMRNCTRLSTA_DIAG_NELPBK 0x1000 /* Nearend Loopback mode */
+#define E1000_KMRNCTRLSTA_K1_CONFIG 0x7
+#define E1000_KMRNCTRLSTA_K1_ENABLE 0x140E
+#define E1000_KMRNCTRLSTA_K1_DISABLE 0x1400
#define IFE_PHY_EXTENDED_STATUS_CONTROL 0x10
#define IFE_PHY_SPECIAL_CONTROL 0x11 /* 100BaseTx PHY Special Control */
diff --git a/drivers/net/e1000e/ich8lan.c b/drivers/net/e1000e/ich8lan.c
index 9e23f50f..d56c747 100644
--- a/drivers/net/e1000e/ich8lan.c
+++ b/drivers/net/e1000e/ich8lan.c
@@ -338,6 +338,7 @@
{
struct e1000_nvm_info *nvm = &hw->nvm;
struct e1000_dev_spec_ich8lan *dev_spec = &hw->dev_spec.ich8lan;
+ union ich8_hws_flash_status hsfsts;
u32 gfpreg;
u32 sector_base_addr;
u32 sector_end_addr;
@@ -374,6 +375,20 @@
/* Adjust to word count */
nvm->flash_bank_size /= sizeof(u16);
+ /*
+ * Make sure the flash bank size does not overwrite the 4k
+ * sector ranges. We may have 64k allotted to us but we only care
+ * about the first 2 4k sectors. Therefore, if we have anything less
+ * than 64k set in the HSFSTS register, we will reduce the bank size
+ * down to 4k and let the rest remain unused. If berasesz == 3, then
+ * we are working in 64k mode. Otherwise we are not.
+ */
+ if (nvm->flash_bank_size > E1000_ICH8_SHADOW_RAM_WORDS) {
+ hsfsts.regval = er16flash(ICH_FLASH_HSFSTS);
+ if (hsfsts.hsf_status.berasesz != 3)
+ nvm->flash_bank_size = E1000_ICH8_SHADOW_RAM_WORDS;
+ }
+
nvm->word_size = E1000_ICH8_SHADOW_RAM_WORDS;
/* Clear shadow ram */
@@ -446,6 +461,95 @@
return 0;
}
+/**
+ * e1000_check_for_copper_link_ich8lan - Check for link (Copper)
+ * @hw: pointer to the HW structure
+ *
+ * Checks to see of the link status of the hardware has changed. If a
+ * change in link status has been detected, then we read the PHY registers
+ * to get the current speed/duplex if link exists.
+ **/
+static s32 e1000_check_for_copper_link_ich8lan(struct e1000_hw *hw)
+{
+ struct e1000_mac_info *mac = &hw->mac;
+ s32 ret_val;
+ bool link;
+
+ /*
+ * We only want to go out to the PHY registers to see if Auto-Neg
+ * has completed and/or if our link status has changed. The
+ * get_link_status flag is set upon receiving a Link Status
+ * Change or Rx Sequence Error interrupt.
+ */
+ if (!mac->get_link_status) {
+ ret_val = 0;
+ goto out;
+ }
+
+ if (hw->mac.type == e1000_pchlan) {
+ ret_val = e1000e_write_kmrn_reg(hw,
+ E1000_KMRNCTRLSTA_K1_CONFIG,
+ E1000_KMRNCTRLSTA_K1_ENABLE);
+ if (ret_val)
+ goto out;
+ }
+
+ /*
+ * First we want to see if the MII Status Register reports
+ * link. If so, then we want to get the current speed/duplex
+ * of the PHY.
+ */
+ ret_val = e1000e_phy_has_link_generic(hw, 1, 0, &link);
+ if (ret_val)
+ goto out;
+
+ if (!link)
+ goto out; /* No link detected */
+
+ mac->get_link_status = false;
+
+ if (hw->phy.type == e1000_phy_82578) {
+ ret_val = e1000_link_stall_workaround_hv(hw);
+ if (ret_val)
+ goto out;
+ }
+
+ /*
+ * Check if there was DownShift, must be checked
+ * immediately after link-up
+ */
+ e1000e_check_downshift(hw);
+
+ /*
+ * If we are forcing speed/duplex, then we simply return since
+ * we have already determined whether we have link or not.
+ */
+ if (!mac->autoneg) {
+ ret_val = -E1000_ERR_CONFIG;
+ goto out;
+ }
+
+ /*
+ * Auto-Neg is enabled. Auto Speed Detection takes care
+ * of MAC speed/duplex configuration. So we only need to
+ * configure Collision Distance in the MAC.
+ */
+ e1000e_config_collision_dist(hw);
+
+ /*
+ * Configure Flow Control now that Auto-Neg has completed.
+ * First, we need to restore the desired flow control
+ * settings because we may have had to re-autoneg with a
+ * different link partner.
+ */
+ ret_val = e1000e_config_fc_after_link_up(hw);
+ if (ret_val)
+ hw_dbg(hw, "Error configuring flow control\n");
+
+out:
+ return ret_val;
+}
+
static s32 e1000_get_variants_ich8lan(struct e1000_adapter *adapter)
{
struct e1000_hw *hw = &adapter->hw;
@@ -694,6 +798,38 @@
}
/**
+ * e1000_lan_init_done_ich8lan - Check for PHY config completion
+ * @hw: pointer to the HW structure
+ *
+ * Check the appropriate indication the MAC has finished configuring the
+ * PHY after a software reset.
+ **/
+static void e1000_lan_init_done_ich8lan(struct e1000_hw *hw)
+{
+ u32 data, loop = E1000_ICH8_LAN_INIT_TIMEOUT;
+
+ /* Wait for basic configuration completes before proceeding */
+ do {
+ data = er32(STATUS);
+ data &= E1000_STATUS_LAN_INIT_DONE;
+ udelay(100);
+ } while ((!data) && --loop);
+
+ /*
+ * If basic configuration is incomplete before the above loop
+ * count reaches 0, loading the configuration from NVM will
+ * leave the PHY in a bad state possibly resulting in no link.
+ */
+ if (loop == 0)
+ hw_dbg(hw, "LAN_INIT_DONE not set, increase timeout\n");
+
+ /* Clear the Init Done bit for the next init event */
+ data = er32(STATUS);
+ data &= ~E1000_STATUS_LAN_INIT_DONE;
+ ew32(STATUS, data);
+}
+
+/**
* e1000_phy_hw_reset_ich8lan - Performs a PHY reset
* @hw: pointer to the HW structure
*
@@ -707,13 +843,15 @@
u32 i;
u32 data, cnf_size, cnf_base_addr, sw_cfg_mask;
s32 ret_val;
- u16 loop = E1000_ICH8_LAN_INIT_TIMEOUT;
u16 word_addr, reg_data, reg_addr, phy_page = 0;
ret_val = e1000e_phy_hw_reset_generic(hw);
if (ret_val)
return ret_val;
+ /* Allow time for h/w to get to a quiescent state after reset */
+ mdelay(10);
+
if (hw->mac.type == e1000_pchlan) {
ret_val = e1000_hv_phy_workarounds_ich8lan(hw);
if (ret_val)
@@ -741,26 +879,8 @@
if (!(data & sw_cfg_mask))
return 0;
- /* Wait for basic configuration completes before proceeding*/
- do {
- data = er32(STATUS);
- data &= E1000_STATUS_LAN_INIT_DONE;
- udelay(100);
- } while ((!data) && --loop);
-
- /*
- * If basic configuration is incomplete before the above loop
- * count reaches 0, loading the configuration from NVM will
- * leave the PHY in a bad state possibly resulting in no link.
- */
- if (loop == 0) {
- hw_dbg(hw, "LAN_INIT_DONE not set, increase timeout\n");
- }
-
- /* Clear the Init Done bit for the next init event */
- data = er32(STATUS);
- data &= ~E1000_STATUS_LAN_INIT_DONE;
- ew32(STATUS, data);
+ /* Wait for basic configuration completes before proceeding */
+ e1000_lan_init_done_ich8lan(hw);
/*
* Make sure HW does not configure LCD from PHY
@@ -961,12 +1081,14 @@
phy_ctrl |= E1000_PHY_CTRL_D0A_LPLU;
ew32(PHY_CTRL, phy_ctrl);
+ if (phy->type != e1000_phy_igp_3)
+ return 0;
+
/*
* Call gig speed drop workaround on LPLU before accessing
* any PHY registers
*/
- if ((hw->mac.type == e1000_ich8lan) &&
- (hw->phy.type == e1000_phy_igp_3))
+ if (hw->mac.type == e1000_ich8lan)
e1000e_gig_downshift_workaround_ich8lan(hw);
/* When LPLU is enabled, we should disable SmartSpeed */
@@ -979,6 +1101,9 @@
phy_ctrl &= ~E1000_PHY_CTRL_D0A_LPLU;
ew32(PHY_CTRL, phy_ctrl);
+ if (phy->type != e1000_phy_igp_3)
+ return 0;
+
/*
* LPLU and SmartSpeed are mutually exclusive. LPLU is used
* during Dx states where the power conservation is most
@@ -1038,6 +1163,10 @@
if (!active) {
phy_ctrl &= ~E1000_PHY_CTRL_NOND0A_LPLU;
ew32(PHY_CTRL, phy_ctrl);
+
+ if (phy->type != e1000_phy_igp_3)
+ return 0;
+
/*
* LPLU and SmartSpeed are mutually exclusive. LPLU is used
* during Dx states where the power conservation is most
@@ -1073,12 +1202,14 @@
phy_ctrl |= E1000_PHY_CTRL_NOND0A_LPLU;
ew32(PHY_CTRL, phy_ctrl);
+ if (phy->type != e1000_phy_igp_3)
+ return 0;
+
/*
* Call gig speed drop workaround on LPLU before accessing
* any PHY registers
*/
- if ((hw->mac.type == e1000_ich8lan) &&
- (hw->phy.type == e1000_phy_igp_3))
+ if (hw->mac.type == e1000_ich8lan)
e1000e_gig_downshift_workaround_ich8lan(hw);
/* When LPLU is enabled, we should disable SmartSpeed */
@@ -1905,7 +2036,7 @@
break;
case 1:
sector_size = ICH_FLASH_SEG_SIZE_4K;
- iteration = flash_bank_size / ICH_FLASH_SEG_SIZE_4K;
+ iteration = 1;
break;
case 2:
if (hw->mac.type == e1000_ich9lan) {
@@ -1917,7 +2048,7 @@
break;
case 3:
sector_size = ICH_FLASH_SEG_SIZE_64K;
- iteration = flash_bank_size / ICH_FLASH_SEG_SIZE_64K;
+ iteration = 1;
break;
default:
return -E1000_ERR_NVM;
@@ -2143,6 +2274,12 @@
ctrl = er32(CTRL);
if (!e1000_check_reset_block(hw)) {
+ /* Clear PHY Reset Asserted bit */
+ if (hw->mac.type >= e1000_pchlan) {
+ u32 status = er32(STATUS);
+ ew32(STATUS, status & ~E1000_STATUS_PHYRA);
+ }
+
/*
* PHY HW reset requires MAC CORE reset at the same
* time to make sure the interface between MAC and the
@@ -2156,22 +2293,33 @@
ew32(CTRL, (ctrl | E1000_CTRL_RST));
msleep(20);
- if (!ret_val) {
- /* release the swflag because it is not reset by
- * hardware reset
- */
+ if (!ret_val)
e1000_release_swflag_ich8lan(hw);
+
+ if (ctrl & E1000_CTRL_PHY_RST)
+ ret_val = hw->phy.ops.get_cfg_done(hw);
+
+ if (hw->mac.type >= e1000_ich10lan) {
+ e1000_lan_init_done_ich8lan(hw);
+ } else {
+ ret_val = e1000e_get_auto_rd_done(hw);
+ if (ret_val) {
+ /*
+ * When auto config read does not complete, do not
+ * return with an error. This can happen in situations
+ * where there is no eeprom and prevents getting link.
+ */
+ hw_dbg(hw, "Auto Read Done did not complete\n");
+ }
}
- ret_val = e1000e_get_auto_rd_done(hw);
- if (ret_val) {
- /*
- * When auto config read does not complete, do not
- * return with an error. This can happen in situations
- * where there is no eeprom and prevents getting link.
- */
- hw_dbg(hw, "Auto Read Done did not complete\n");
- }
+ /*
+ * For PCH, this write will make sure that any noise
+ * will be detected as a CRC error and be dropped rather than show up
+ * as a bad packet to the DMA engine.
+ */
+ if (hw->mac.type == e1000_pchlan)
+ ew32(CRC_OFFSET, 0x65656565);
ew32(IMC, 0xffffffff);
icr = er32(ICR);
@@ -2222,6 +2370,18 @@
for (i = 0; i < mac->mta_reg_count; i++)
E1000_WRITE_REG_ARRAY(hw, E1000_MTA, i, 0);
+ /*
+ * The 82578 Rx buffer will stall if wakeup is enabled in host and
+ * the ME. Reading the BM_WUC register will clear the host wakeup bit.
+ * Reset the phy after disabling host wakeup to reset the Rx buffer.
+ */
+ if (hw->phy.type == e1000_phy_82578) {
+ hw->phy.ops.read_phy_reg(hw, BM_WUC, &i);
+ ret_val = e1000_phy_hw_reset_ich8lan(hw);
+ if (ret_val)
+ return ret_val;
+ }
+
/* Setup link and flow control */
ret_val = e1000_setup_link_ich8lan(hw);
@@ -2254,16 +2414,6 @@
ew32(CTRL_EXT, ctrl_ext);
/*
- * The 82578 Rx buffer will stall if wakeup is enabled in host and
- * the ME. Reading the BM_WUC register will clear the host wakeup bit.
- * Reset the phy after disabling host wakeup to reset the Rx buffer.
- */
- if (hw->phy.type == e1000_phy_82578) {
- e1e_rphy(hw, BM_WUC, &i);
- e1000e_phy_hw_reset_generic(hw);
- }
-
- /*
* Clear all of the statistics registers (clear on read). It is
* important that we do this after we have tried to establish link
* because the symbol error count will increment wildly if there
@@ -2485,6 +2635,14 @@
if (ret_val)
return ret_val;
+ if ((hw->mac.type == e1000_pchlan) && (*speed == SPEED_1000)) {
+ ret_val = e1000e_write_kmrn_reg(hw,
+ E1000_KMRNCTRLSTA_K1_CONFIG,
+ E1000_KMRNCTRLSTA_K1_DISABLE);
+ if (ret_val)
+ return ret_val;
+ }
+
if ((hw->mac.type == e1000_ich8lan) &&
(hw->phy.type == e1000_phy_igp_3) &&
(*speed == SPEED_1000)) {
@@ -2850,6 +3008,16 @@
{
u32 bank = 0;
+ if (hw->mac.type >= e1000_pchlan) {
+ u32 status = er32(STATUS);
+
+ if (status & E1000_STATUS_PHYRA)
+ ew32(STATUS, status & ~E1000_STATUS_PHYRA);
+ else
+ hw_dbg(hw,
+ "PHY Reset Asserted not set - needs delay\n");
+ }
+
e1000e_get_cfg_done(hw);
/* If EEPROM is not marked present, init the IGP 3 PHY manually */
@@ -2921,7 +3089,7 @@
static struct e1000_mac_operations ich8_mac_ops = {
.id_led_init = e1000e_id_led_init,
.check_mng_mode = e1000_check_mng_mode_ich8lan,
- .check_for_link = e1000e_check_for_copper_link,
+ .check_for_link = e1000_check_for_copper_link_ich8lan,
/* cleanup_led dependent on mac type */
.clear_hw_cntrs = e1000_clear_hw_cntrs_ich8lan,
.get_bus_info = e1000_get_bus_info_ich8lan,
diff --git a/drivers/net/e1000e/lib.c b/drivers/net/e1000e/lib.c
index be6d9e9..99ba2b8 100644
--- a/drivers/net/e1000e/lib.c
+++ b/drivers/net/e1000e/lib.c
@@ -378,12 +378,6 @@
mac->get_link_status = 0;
- if (hw->phy.type == e1000_phy_82578) {
- ret_val = e1000_link_stall_workaround_hv(hw);
- if (ret_val)
- return ret_val;
- }
-
/*
* Check if there was DownShift, must be checked
* immediately after link-up
diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c
index 679885a..63415bb 100644
--- a/drivers/net/e1000e/netdev.c
+++ b/drivers/net/e1000e/netdev.c
@@ -4785,6 +4785,9 @@
netif_device_detach(netdev);
+ if (state == pci_channel_io_perm_failure)
+ return PCI_ERS_RESULT_DISCONNECT;
+
if (netif_running(netdev))
e1000e_down(adapter);
pci_disable_device(pdev);
diff --git a/drivers/net/e1000e/phy.c b/drivers/net/e1000e/phy.c
index e23459c..994401f 100644
--- a/drivers/net/e1000e/phy.c
+++ b/drivers/net/e1000e/phy.c
@@ -1531,7 +1531,12 @@
*/
ret_val = e1e_rphy(hw, PHY_STATUS, &phy_status);
if (ret_val)
- break;
+ /*
+ * If the first read fails, another entity may have
+ * ownership of the resources, wait and try again to
+ * see if they have relinquished the resources yet.
+ */
+ udelay(usec_interval);
ret_val = e1e_rphy(hw, PHY_STATUS, &phy_status);
if (ret_val)
break;
@@ -2737,6 +2742,11 @@
if (hw->phy.type != e1000_phy_82578)
goto out;
+ /* Do not apply workaround if in PHY loopback bit 14 set */
+ hw->phy.ops.read_phy_reg(hw, PHY_CONTROL, &data);
+ if (data & PHY_CONTROL_LB)
+ goto out;
+
/* check if link is up and at 1Gbps */
ret_val = hw->phy.ops.read_phy_reg(hw, BM_CS_STATUS, &data);
if (ret_val)
diff --git a/drivers/net/epic100.c b/drivers/net/epic100.c
index b60e27d..88d7ebf 100644
--- a/drivers/net/epic100.c
+++ b/drivers/net/epic100.c
@@ -338,8 +338,7 @@
#ifndef MODULE
static int printed_version;
if (!printed_version++)
- printk (KERN_INFO "%s" KERN_INFO "%s",
- version, version2);
+ printk(KERN_INFO "%s%s", version, version2);
#endif
card_idx++;
@@ -1600,7 +1599,7 @@
{
/* when a module, this is printed whether or not devices are found in probe */
#ifdef MODULE
- printk (KERN_INFO "%s" KERN_INFO "%s",
+ printk (KERN_INFO "%s%s",
version, version2);
#endif
diff --git a/drivers/net/fealnx.c b/drivers/net/fealnx.c
index 891be28..48385c4 100644
--- a/drivers/net/fealnx.c
+++ b/drivers/net/fealnx.c
@@ -1209,17 +1209,20 @@
unsigned long flags;
int i;
- printk(KERN_WARNING "%s: Transmit timed out, status %8.8x,"
- " resetting...\n", dev->name, ioread32(ioaddr + ISR));
+ printk(KERN_WARNING
+ "%s: Transmit timed out, status %8.8x, resetting...\n",
+ dev->name, ioread32(ioaddr + ISR));
{
printk(KERN_DEBUG " Rx ring %p: ", np->rx_ring);
for (i = 0; i < RX_RING_SIZE; i++)
- printk(" %8.8x", (unsigned int) np->rx_ring[i].status);
- printk("\n" KERN_DEBUG " Tx ring %p: ", np->tx_ring);
+ printk(KERN_CONT " %8.8x",
+ (unsigned int) np->rx_ring[i].status);
+ printk(KERN_CONT "\n");
+ printk(KERN_DEBUG " Tx ring %p: ", np->tx_ring);
for (i = 0; i < TX_RING_SIZE; i++)
- printk(" %4.4x", np->tx_ring[i].status);
- printk("\n");
+ printk(KERN_CONT " %4.4x", np->tx_ring[i].status);
+ printk(KERN_CONT "\n");
}
spin_lock_irqsave(&np->lock, flags);
diff --git a/drivers/net/fec.h b/drivers/net/fec.h
index 30b7dd6..cc47f3f 100644
--- a/drivers/net/fec.h
+++ b/drivers/net/fec.h
@@ -46,12 +46,12 @@
#else
-#define FEC_ECNTRL; 0x000 /* Ethernet control reg */
-#define FEC_IEVENT; 0x004 /* Interrupt even reg */
-#define FEC_IMASK; 0x008 /* Interrupt mask reg */
-#define FEC_IVEC; 0x00c /* Interrupt vec status reg */
-#define FEC_R_DES_ACTIVE; 0x010 /* Receive descriptor reg */
-#define FEC_X_DES_ACTIVE; 0x01c /* Transmit descriptor reg */
+#define FEC_ECNTRL 0x000 /* Ethernet control reg */
+#define FEC_IEVENT 0x004 /* Interrupt even reg */
+#define FEC_IMASK 0x008 /* Interrupt mask reg */
+#define FEC_IVEC 0x00c /* Interrupt vec status reg */
+#define FEC_R_DES_ACTIVE 0x010 /* Receive descriptor reg */
+#define FEC_X_DES_ACTIVE 0x014 /* Transmit descriptor reg */
#define FEC_MII_DATA 0x040 /* MII manage frame reg */
#define FEC_MII_SPEED 0x044 /* MII speed control reg */
#define FEC_R_BOUND 0x08c /* FIFO receive bound reg */
diff --git a/drivers/net/forcedeth.c b/drivers/net/forcedeth.c
index 1094d29..3b4e076 100644
--- a/drivers/net/forcedeth.c
+++ b/drivers/net/forcedeth.c
@@ -3514,11 +3514,13 @@
nv_msi_workaround(np);
#ifdef CONFIG_FORCEDETH_NAPI
- napi_schedule(&np->napi);
-
- /* Disable furthur irq's
- (msix not enabled with napi) */
- writel(0, base + NvRegIrqMask);
+ if (napi_schedule_prep(&np->napi)) {
+ /*
+ * Disable further irq's (msix not enabled with napi)
+ */
+ writel(0, base + NvRegIrqMask);
+ __napi_schedule(&np->napi);
+ }
#else
do
@@ -3615,12 +3617,13 @@
nv_msi_workaround(np);
#ifdef CONFIG_FORCEDETH_NAPI
- napi_schedule(&np->napi);
-
- /* Disable furthur irq's
- (msix not enabled with napi) */
- writel(0, base + NvRegIrqMask);
-
+ if (napi_schedule_prep(&np->napi)) {
+ /*
+ * Disable further irq's (msix not enabled with napi)
+ */
+ writel(0, base + NvRegIrqMask);
+ __napi_schedule(&np->napi);
+ }
#else
do
{
diff --git a/drivers/net/fsl_pq_mdio.c b/drivers/net/fsl_pq_mdio.c
index 3af5813..d167090 100644
--- a/drivers/net/fsl_pq_mdio.c
+++ b/drivers/net/fsl_pq_mdio.c
@@ -188,7 +188,7 @@
}
-#ifdef CONFIG_GIANFAR
+#if defined(CONFIG_GIANFAR) || defined(CONFIG_GIANFAR_MODULE)
static u32 __iomem *get_gfar_tbipa(struct fsl_pq_mdio __iomem *regs)
{
struct gfar __iomem *enet_regs;
@@ -206,7 +206,7 @@
#endif
-#ifdef CONFIG_UCC_GETH
+#if defined(CONFIG_UCC_GETH) || defined(CONFIG_UCC_GETH_MODULE)
static int get_ucc_id_for_range(u64 start, u64 end, u32 *ucc_id)
{
struct device_node *np = NULL;
@@ -291,7 +291,7 @@
if (of_device_is_compatible(np, "fsl,gianfar-mdio") ||
of_device_is_compatible(np, "fsl,gianfar-tbi") ||
of_device_is_compatible(np, "gianfar")) {
-#ifdef CONFIG_GIANFAR
+#if defined(CONFIG_GIANFAR) || defined(CONFIG_GIANFAR_MODULE)
tbipa = get_gfar_tbipa(regs);
#else
err = -ENODEV;
@@ -299,7 +299,7 @@
#endif
} else if (of_device_is_compatible(np, "fsl,ucc-mdio") ||
of_device_is_compatible(np, "ucc_geth_phy")) {
-#ifdef CONFIG_UCC_GETH
+#if defined(CONFIG_UCC_GETH) || defined(CONFIG_UCC_GETH_MODULE)
u32 id;
static u32 mii_mng_master;
diff --git a/drivers/net/hamachi.c b/drivers/net/hamachi.c
index 9d5b62c..d62378c 100644
--- a/drivers/net/hamachi.c
+++ b/drivers/net/hamachi.c
@@ -173,8 +173,8 @@
static const char version[] __devinitconst =
KERN_INFO DRV_NAME ".c:v" DRV_VERSION " " DRV_RELDATE " Written by Donald Becker\n"
-KERN_INFO " Some modifications by Eric kasten <kasten@nscl.msu.edu>\n"
-KERN_INFO " Further modifications by Keith Underwood <keithu@parl.clemson.edu>\n";
+" Some modifications by Eric kasten <kasten@nscl.msu.edu>\n"
+" Further modifications by Keith Underwood <keithu@parl.clemson.edu>\n";
/* IP_MF appears to be only defined in <netinet/ip.h>, however,
@@ -1080,11 +1080,14 @@
{
printk(KERN_DEBUG " Rx ring %p: ", hmp->rx_ring);
for (i = 0; i < RX_RING_SIZE; i++)
- printk(" %8.8x", le32_to_cpu(hmp->rx_ring[i].status_n_length));
- printk("\n"KERN_DEBUG" Tx ring %p: ", hmp->tx_ring);
+ printk(KERN_CONT " %8.8x",
+ le32_to_cpu(hmp->rx_ring[i].status_n_length));
+ printk(KERN_CONT "\n");
+ printk(KERN_DEBUG" Tx ring %p: ", hmp->tx_ring);
for (i = 0; i < TX_RING_SIZE; i++)
- printk(" %4.4x", le32_to_cpu(hmp->tx_ring[i].status_n_length));
- printk("\n");
+ printk(KERN_CONT " %4.4x",
+ le32_to_cpu(hmp->tx_ring[i].status_n_length));
+ printk(KERN_CONT "\n");
}
/* Reinit the hardware and make sure the Rx and Tx processes
@@ -1753,13 +1756,13 @@
#ifdef __i386__
if (hamachi_debug > 2) {
- printk("\n"KERN_DEBUG" Tx ring at %8.8x:\n",
+ printk(KERN_DEBUG " Tx ring at %8.8x:\n",
(int)hmp->tx_ring_dma);
for (i = 0; i < TX_RING_SIZE; i++)
- printk(" %c #%d desc. %8.8x %8.8x.\n",
+ printk(KERN_DEBUG " %c #%d desc. %8.8x %8.8x.\n",
readl(ioaddr + TxCurPtr) == (long)&hmp->tx_ring[i] ? '>' : ' ',
i, hmp->tx_ring[i].status_n_length, hmp->tx_ring[i].addr);
- printk("\n"KERN_DEBUG " Rx ring %8.8x:\n",
+ printk(KERN_DEBUG " Rx ring %8.8x:\n",
(int)hmp->rx_ring_dma);
for (i = 0; i < RX_RING_SIZE; i++) {
printk(KERN_DEBUG " %c #%d desc. %4.4x %8.8x\n",
@@ -1770,7 +1773,7 @@
u16 *addr = (u16 *)
hmp->rx_skbuff[i]->data;
int j;
-
+ printk(KERN_DEBUG "Addr: ");
for (j = 0; j < 0x50; j++)
printk(" %4.4x", addr[j]);
printk("\n");
diff --git a/drivers/net/hamradio/baycom_epp.c b/drivers/net/hamradio/baycom_epp.c
index 5e4b7af..3527032 100644
--- a/drivers/net/hamradio/baycom_epp.c
+++ b/drivers/net/hamradio/baycom_epp.c
@@ -68,7 +68,7 @@
static const char bc_drvname[] = "baycom_epp";
static const char bc_drvinfo[] = KERN_INFO "baycom_epp: (C) 1998-2000 Thomas Sailer, HB9JNX/AE4WA\n"
-KERN_INFO "baycom_epp: version 0.7 compiled " __TIME__ " " __DATE__ "\n";
+"baycom_epp: version 0.7 compiled " __TIME__ " " __DATE__ "\n";
/* --------------------------------------------------------------------- */
diff --git a/drivers/net/hamradio/baycom_par.c b/drivers/net/hamradio/baycom_par.c
index 2e6fc4d..5f5af9a 100644
--- a/drivers/net/hamradio/baycom_par.c
+++ b/drivers/net/hamradio/baycom_par.c
@@ -102,7 +102,7 @@
static const char bc_drvname[] = "baycom_par";
static const char bc_drvinfo[] = KERN_INFO "baycom_par: (C) 1996-2000 Thomas Sailer, HB9JNX/AE4WA\n"
-KERN_INFO "baycom_par: version 0.9 compiled " __TIME__ " " __DATE__ "\n";
+"baycom_par: version 0.9 compiled " __TIME__ " " __DATE__ "\n";
/* --------------------------------------------------------------------- */
diff --git a/drivers/net/hamradio/baycom_ser_fdx.c b/drivers/net/hamradio/baycom_ser_fdx.c
index b6a816e..aa4488e 100644
--- a/drivers/net/hamradio/baycom_ser_fdx.c
+++ b/drivers/net/hamradio/baycom_ser_fdx.c
@@ -91,7 +91,7 @@
static const char bc_drvname[] = "baycom_ser_fdx";
static const char bc_drvinfo[] = KERN_INFO "baycom_ser_fdx: (C) 1996-2000 Thomas Sailer, HB9JNX/AE4WA\n"
-KERN_INFO "baycom_ser_fdx: version 0.10 compiled " __TIME__ " " __DATE__ "\n";
+"baycom_ser_fdx: version 0.10 compiled " __TIME__ " " __DATE__ "\n";
/* --------------------------------------------------------------------- */
diff --git a/drivers/net/hamradio/baycom_ser_hdx.c b/drivers/net/hamradio/baycom_ser_hdx.c
index 3bcc57a..88c5935 100644
--- a/drivers/net/hamradio/baycom_ser_hdx.c
+++ b/drivers/net/hamradio/baycom_ser_hdx.c
@@ -79,7 +79,7 @@
static const char bc_drvname[] = "baycom_ser_hdx";
static const char bc_drvinfo[] = KERN_INFO "baycom_ser_hdx: (C) 1996-2000 Thomas Sailer, HB9JNX/AE4WA\n"
-KERN_INFO "baycom_ser_hdx: version 0.10 compiled " __TIME__ " " __DATE__ "\n";
+"baycom_ser_hdx: version 0.10 compiled " __TIME__ " " __DATE__ "\n";
/* --------------------------------------------------------------------- */
diff --git a/drivers/net/igb/e1000_82575.c b/drivers/net/igb/e1000_82575.c
index efd9be2..ac28dd5 100644
--- a/drivers/net/igb/e1000_82575.c
+++ b/drivers/net/igb/e1000_82575.c
@@ -190,6 +190,10 @@
phy->ops.write_reg = igb_write_phy_reg_igp;
}
+ /* set lan id */
+ hw->bus.func = (rd32(E1000_STATUS) & E1000_STATUS_FUNC_MASK) >>
+ E1000_STATUS_FUNC_SHIFT;
+
/* Set phy->phy_addr and phy->id. */
ret_val = igb_get_phy_id_82575(hw);
if (ret_val)
diff --git a/drivers/net/igb/igb_main.c b/drivers/net/igb/igb_main.c
index ea17319..be48029 100644
--- a/drivers/net/igb/igb_main.c
+++ b/drivers/net/igb/igb_main.c
@@ -4549,11 +4549,12 @@
cleaned = true;
cleaned_count++;
+ /* this is the fast path for the non-packet split case */
if (!adapter->rx_ps_hdr_size) {
pci_unmap_single(pdev, buffer_info->dma,
- adapter->rx_buffer_len +
- NET_IP_ALIGN,
+ adapter->rx_buffer_len,
PCI_DMA_FROMDEVICE);
+ buffer_info->dma = 0;
skb_put(skb, length);
goto send_up;
}
@@ -4570,8 +4571,9 @@
if (!skb_shinfo(skb)->nr_frags) {
pci_unmap_single(pdev, buffer_info->dma,
- adapter->rx_ps_hdr_size + NET_IP_ALIGN,
+ adapter->rx_ps_hdr_size,
PCI_DMA_FROMDEVICE);
+ buffer_info->dma = 0;
skb_put(skb, hlen);
}
@@ -4713,7 +4715,6 @@
bufsz = adapter->rx_ps_hdr_size;
else
bufsz = adapter->rx_buffer_len;
- bufsz += NET_IP_ALIGN;
while (cleaned_count--) {
rx_desc = E1000_RX_DESC_ADV(*rx_ring, i);
@@ -4737,7 +4738,7 @@
}
if (!buffer_info->skb) {
- skb = netdev_alloc_skb(netdev, bufsz);
+ skb = netdev_alloc_skb(netdev, bufsz + NET_IP_ALIGN);
if (!skb) {
adapter->alloc_rx_buff_failed++;
goto no_buffers;
@@ -5338,6 +5339,9 @@
netif_device_detach(netdev);
+ if (state == pci_channel_io_perm_failure)
+ return PCI_ERS_RESULT_DISCONNECT;
+
if (netif_running(netdev))
igb_down(adapter);
pci_disable_device(pdev);
diff --git a/drivers/net/irda/bfin_sir.c b/drivers/net/irda/bfin_sir.c
index f3eed6a..911c082 100644
--- a/drivers/net/irda/bfin_sir.c
+++ b/drivers/net/irda/bfin_sir.c
@@ -677,6 +677,14 @@
return 0;
}
+static const struct net_device_ops bfin_sir_ndo = {
+ .ndo_open = bfin_sir_open,
+ .ndo_stop = bfin_sir_stop,
+ .ndo_start_xmit = bfin_sir_hard_xmit,
+ .ndo_do_ioctl = bfin_sir_ioctl,
+ .ndo_get_stats = bfin_sir_stats,
+};
+
static int __devinit bfin_sir_probe(struct platform_device *pdev)
{
struct net_device *dev;
@@ -718,12 +726,8 @@
if (err)
goto err_mem_3;
- dev->hard_start_xmit = bfin_sir_hard_xmit;
- dev->open = bfin_sir_open;
- dev->stop = bfin_sir_stop;
- dev->do_ioctl = bfin_sir_ioctl;
- dev->get_stats = bfin_sir_stats;
- dev->irq = sir_port->irq;
+ dev->netdev_ops = &bfin_sir_ndo;
+ dev->irq = sir_port->irq;
irda_init_max_qos_capabilies(&self->qos);
diff --git a/drivers/net/irda/irtty-sir.c b/drivers/net/irda/irtty-sir.c
index d53aa95..20f9bc6 100644
--- a/drivers/net/irda/irtty-sir.c
+++ b/drivers/net/irda/irtty-sir.c
@@ -31,7 +31,6 @@
#include <linux/tty.h>
#include <linux/init.h>
#include <asm/uaccess.h>
-#include <linux/smp_lock.h>
#include <linux/delay.h>
#include <linux/mutex.h>
diff --git a/drivers/net/ixgbe/ixgbe_dcb_nl.c b/drivers/net/ixgbe/ixgbe_dcb_nl.c
index d56890f..7c5978a 100644
--- a/drivers/net/ixgbe/ixgbe_dcb_nl.c
+++ b/drivers/net/ixgbe/ixgbe_dcb_nl.c
@@ -138,6 +138,10 @@
adapter->hw.fc.requested_mode = ixgbe_fc_none;
}
adapter->flags &= ~IXGBE_FLAG_RSS_ENABLED;
+ if (adapter->hw.mac.type == ixgbe_mac_82599EB) {
+ adapter->flags &= ~IXGBE_FLAG_FDIR_HASH_CAPABLE;
+ adapter->flags &= ~IXGBE_FLAG_FDIR_PERFECT_CAPABLE;
+ }
adapter->flags |= IXGBE_FLAG_DCB_ENABLED;
ixgbe_init_interrupt_scheme(adapter);
if (netif_running(netdev))
@@ -154,6 +158,8 @@
adapter->dcb_cfg.pfc_mode_enable = false;
adapter->flags &= ~IXGBE_FLAG_DCB_ENABLED;
adapter->flags |= IXGBE_FLAG_RSS_ENABLED;
+ if (adapter->hw.mac.type == ixgbe_mac_82599EB)
+ adapter->flags |= IXGBE_FLAG_FDIR_HASH_CAPABLE;
ixgbe_init_interrupt_scheme(adapter);
if (netif_running(netdev))
netdev->netdev_ops->ndo_open(netdev);
diff --git a/drivers/net/ixgbe/ixgbe_ethtool.c b/drivers/net/ixgbe/ixgbe_ethtool.c
index 86f4f3e..2a97800 100644
--- a/drivers/net/ixgbe/ixgbe_ethtool.c
+++ b/drivers/net/ixgbe/ixgbe_ethtool.c
@@ -139,7 +139,7 @@
ecmd->autoneg = AUTONEG_ENABLE;
ecmd->transceiver = XCVR_EXTERNAL;
if ((hw->phy.media_type == ixgbe_media_type_copper) ||
- (hw->mac.type == ixgbe_mac_82599EB)) {
+ (hw->phy.multispeed_fiber)) {
ecmd->supported |= (SUPPORTED_1000baseT_Full |
SUPPORTED_Autoneg);
@@ -217,7 +217,7 @@
s32 err = 0;
if ((hw->phy.media_type == ixgbe_media_type_copper) ||
- (hw->mac.type == ixgbe_mac_82599EB)) {
+ (hw->phy.multispeed_fiber)) {
/* 10000/copper and 1000/copper must autoneg
* this function does not support any duplex forcing, but can
* limit the advertising of the adapter to only 10000 or 1000 */
@@ -245,6 +245,7 @@
} else {
/* in this case we currently only support 10Gb/FULL */
if ((ecmd->autoneg == AUTONEG_ENABLE) ||
+ (ecmd->advertising != ADVERTISED_10000baseT_Full) ||
(ecmd->speed + ecmd->duplex != SPEED_10000 + DUPLEX_FULL))
return -EINVAL;
}
@@ -1829,7 +1830,6 @@
break;
default:
wol->supported = 0;
- retval = 0;
}
return retval;
diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c
index e756e22..e3442f4 100644
--- a/drivers/net/ixgbe/ixgbe_main.c
+++ b/drivers/net/ixgbe/ixgbe_main.c
@@ -563,7 +563,6 @@
union ixgbe_adv_rx_desc *rx_desc;
struct ixgbe_rx_buffer *bi;
unsigned int i;
- unsigned int bufsz = rx_ring->rx_buf_len + NET_IP_ALIGN;
i = rx_ring->next_to_use;
bi = &rx_ring->rx_buffer_info[i];
@@ -593,7 +592,9 @@
if (!bi->skb) {
struct sk_buff *skb;
- skb = netdev_alloc_skb(adapter->netdev, bufsz);
+ skb = netdev_alloc_skb(adapter->netdev,
+ (rx_ring->rx_buf_len +
+ NET_IP_ALIGN));
if (!skb) {
adapter->alloc_rx_buff_failed++;
@@ -608,7 +609,8 @@
skb_reserve(skb, NET_IP_ALIGN);
bi->skb = skb;
- bi->dma = pci_map_single(pdev, skb->data, bufsz,
+ bi->dma = pci_map_single(pdev, skb->data,
+ rx_ring->rx_buf_len,
PCI_DMA_FROMDEVICE);
}
/* Refresh the desc even if buffer_addrs didn't change because
@@ -732,6 +734,7 @@
pci_unmap_single(pdev, rx_buffer_info->dma,
rx_ring->rx_buf_len,
PCI_DMA_FROMDEVICE);
+ rx_buffer_info->dma = 0;
skb_put(skb, len);
}
@@ -2694,16 +2697,23 @@
/*
* For hot-pluggable SFP+ devices, a new SFP+ module may have
- * arrived before interrupts were enabled. We need to kick off
- * the SFP+ module setup first, then try to bring up link.
+ * arrived before interrupts were enabled but after probe. Such
+ * devices wouldn't have their type identified yet. We need to
+ * kick off the SFP+ module setup first, then try to bring up link.
* If we're not hot-pluggable SFP+, we just need to configure link
* and bring it up.
*/
- err = hw->phy.ops.identify(hw);
- if (err == IXGBE_ERR_SFP_NOT_SUPPORTED) {
- DPRINTK(PROBE, ERR, "PHY not supported on this NIC %d\n", err);
- ixgbe_down(adapter);
- return err;
+ if (hw->phy.type == ixgbe_phy_unknown) {
+ err = hw->phy.ops.identify(hw);
+ if (err == IXGBE_ERR_SFP_NOT_SUPPORTED) {
+ /*
+ * Take the device down and schedule the sfp tasklet
+ * which will unregister_netdev and log it.
+ */
+ ixgbe_down(adapter);
+ schedule_work(&adapter->sfp_config_module_task);
+ return err;
+ }
}
if (ixgbe_is_sfp(hw)) {
@@ -2812,9 +2822,11 @@
}
if (!rx_buffer_info->page)
continue;
- pci_unmap_page(pdev, rx_buffer_info->page_dma, PAGE_SIZE / 2,
- PCI_DMA_FROMDEVICE);
- rx_buffer_info->page_dma = 0;
+ if (rx_buffer_info->page_dma) {
+ pci_unmap_page(pdev, rx_buffer_info->page_dma,
+ PAGE_SIZE / 2, PCI_DMA_FROMDEVICE);
+ rx_buffer_info->page_dma = 0;
+ }
put_page(rx_buffer_info->page);
rx_buffer_info->page = NULL;
rx_buffer_info->page_offset = 0;
@@ -3118,7 +3130,11 @@
#endif
if (adapter->flags & IXGBE_FLAG_RSS_ENABLED) {
DPRINTK(PROBE, INFO, "FCOE enabled with RSS \n");
- ixgbe_set_rss_queues(adapter);
+ if ((adapter->flags & IXGBE_FLAG_FDIR_HASH_CAPABLE) ||
+ (adapter->flags & IXGBE_FLAG_FDIR_PERFECT_CAPABLE))
+ ixgbe_set_fdir_queues(adapter);
+ else
+ ixgbe_set_rss_queues(adapter);
}
/* adding FCoE rx rings to the end */
f->mask = adapter->num_rx_queues;
@@ -3376,7 +3392,12 @@
}
#endif /* CONFIG_IXGBE_DCB */
if (adapter->flags & IXGBE_FLAG_RSS_ENABLED) {
- ixgbe_cache_ring_rss(adapter);
+ if ((adapter->flags & IXGBE_FLAG_FDIR_HASH_CAPABLE) ||
+ (adapter->flags & IXGBE_FLAG_FDIR_PERFECT_CAPABLE))
+ ixgbe_cache_ring_fdir(adapter);
+ else
+ ixgbe_cache_ring_rss(adapter);
+
fcoe_i = f->mask;
}
for (i = 0; i < f->indices; i++, fcoe_i++)
@@ -3716,14 +3737,15 @@
if ((hw->phy.type == ixgbe_phy_nl) &&
(hw->phy.sfp_type == ixgbe_sfp_type_not_present)) {
s32 ret = hw->phy.ops.identify_sfp(hw);
- if (ret)
+ if (ret == IXGBE_ERR_SFP_NOT_PRESENT)
goto reschedule;
ret = hw->phy.ops.reset(hw);
if (ret == IXGBE_ERR_SFP_NOT_SUPPORTED) {
- DPRINTK(PROBE, ERR, "failed to initialize because an "
- "unsupported SFP+ module type was detected.\n"
- "Reload the driver after installing a "
- "supported module.\n");
+ dev_err(&adapter->pdev->dev, "failed to initialize "
+ "because an unsupported SFP+ module type "
+ "was detected.\n"
+ "Reload the driver after installing a "
+ "supported module.\n");
unregister_netdev(adapter->netdev);
} else {
DPRINTK(PROBE, INFO, "detected SFP+: %d\n",
@@ -4502,7 +4524,8 @@
u32 autoneg;
adapter->flags |= IXGBE_FLAG_IN_SFP_LINK_TASK;
- if (hw->mac.ops.get_link_capabilities)
+ autoneg = hw->phy.autoneg_advertised;
+ if ((!autoneg) && (hw->mac.ops.get_link_capabilities))
hw->mac.ops.get_link_capabilities(hw, &autoneg,
&hw->mac.autoneg);
if (hw->mac.ops.setup_link_speed)
@@ -4524,10 +4547,17 @@
u32 err;
adapter->flags |= IXGBE_FLAG_IN_SFP_MOD_TASK;
+
+ /* Time for electrical oscillations to settle down */
+ msleep(100);
err = hw->phy.ops.identify_sfp(hw);
+
if (err == IXGBE_ERR_SFP_NOT_SUPPORTED) {
- DPRINTK(PROBE, ERR, "PHY not supported on this NIC %d\n", err);
- ixgbe_down(adapter);
+ dev_err(&adapter->pdev->dev, "failed to initialize because "
+ "an unsupported SFP+ module type was detected.\n"
+ "Reload the driver after installing a supported "
+ "module.\n");
+ unregister_netdev(adapter->netdev);
return;
}
hw->mac.ops.setup_sfp(hw);
@@ -5513,8 +5543,10 @@
round_jiffies(jiffies + (2 * HZ)));
err = 0;
} else if (err == IXGBE_ERR_SFP_NOT_SUPPORTED) {
- dev_err(&adapter->pdev->dev, "failed to load because an "
- "unsupported SFP+ module type was detected.\n");
+ dev_err(&adapter->pdev->dev, "failed to initialize because "
+ "an unsupported SFP+ module type was detected.\n"
+ "Reload the driver after installing a supported "
+ "module.\n");
goto err_sw_init;
} else if (err) {
dev_err(&adapter->pdev->dev, "HW Init failed: %d\n", err);
@@ -5555,12 +5587,6 @@
netdev->features |= NETIF_F_FCOE_CRC;
netdev->features |= NETIF_F_FSO;
netdev->fcoe_ddp_xid = IXGBE_FCOE_DDP_MAX - 1;
- DPRINTK(DRV, INFO, "FCoE enabled, "
- "disabling Flow Director\n");
- adapter->flags &= ~IXGBE_FLAG_FDIR_HASH_CAPABLE;
- adapter->flags &=
- ~IXGBE_FLAG_FDIR_PERFECT_CAPABLE;
- adapter->atr_sample_rate = 0;
} else {
adapter->flags &= ~IXGBE_FLAG_FCOE_ENABLED;
}
diff --git a/drivers/net/ixgbe/ixgbe_phy.c b/drivers/net/ixgbe/ixgbe_phy.c
index 453e966..9ecad17 100644
--- a/drivers/net/ixgbe/ixgbe_phy.c
+++ b/drivers/net/ixgbe/ixgbe_phy.c
@@ -60,6 +60,7 @@
if (hw->phy.type == ixgbe_phy_unknown) {
for (phy_addr = 0; phy_addr < IXGBE_MAX_PHY_ADDR; phy_addr++) {
+ hw->phy.mdio.prtad = phy_addr;
if (mdio45_probe(&hw->phy.mdio, phy_addr) == 0) {
ixgbe_get_phy_id(hw);
hw->phy.type =
@@ -68,6 +69,8 @@
break;
}
}
+ /* clear value if nothing found */
+ hw->phy.mdio.prtad = 0;
} else {
status = 0;
}
diff --git a/drivers/net/mdio.c b/drivers/net/mdio.c
index dc45e98..6851bdb 100644
--- a/drivers/net/mdio.c
+++ b/drivers/net/mdio.c
@@ -14,6 +14,10 @@
#include <linux/mdio.h>
#include <linux/module.h>
+MODULE_DESCRIPTION("Generic support for MDIO-compatible transceivers");
+MODULE_AUTHOR("Copyright 2006-2009 Solarflare Communications Inc.");
+MODULE_LICENSE("GPL");
+
/**
* mdio45_probe - probe for an MDIO (clause 45) device
* @mdio: MDIO interface
diff --git a/drivers/net/natsemi.c b/drivers/net/natsemi.c
index c9bfe4e..78c0883 100644
--- a/drivers/net/natsemi.c
+++ b/drivers/net/natsemi.c
@@ -130,8 +130,8 @@
static const char version[] __devinitconst =
KERN_INFO DRV_NAME " dp8381x driver, version "
DRV_VERSION ", " DRV_RELDATE "\n"
- KERN_INFO " originally by Donald Becker <becker@scyld.com>\n"
- KERN_INFO " 2.4.x kernel port by Jeff Garzik, Tjeerd Mulder\n";
+ " originally by Donald Becker <becker@scyld.com>\n"
+ " 2.4.x kernel port by Jeff Garzik, Tjeerd Mulder\n";
MODULE_AUTHOR("Donald Becker <becker@scyld.com>");
MODULE_DESCRIPTION("National Semiconductor DP8381x series PCI Ethernet driver");
diff --git a/drivers/net/ne.c b/drivers/net/ne.c
index 5c3e242..992dbff 100644
--- a/drivers/net/ne.c
+++ b/drivers/net/ne.c
@@ -321,7 +321,7 @@
}
if (ei_debug && version_printed++ == 0)
- printk(KERN_INFO "%s" KERN_INFO "%s", version1, version2);
+ printk(KERN_INFO "%s%s", version1, version2);
printk(KERN_INFO "NE*000 ethercard probe at %#3lx:", ioaddr);
diff --git a/drivers/net/netxen/netxen_nic.h b/drivers/net/netxen/netxen_nic.h
index 970cede..e1cdba7 100644
--- a/drivers/net/netxen/netxen_nic.h
+++ b/drivers/net/netxen/netxen_nic.h
@@ -60,7 +60,18 @@
#define _NETXEN_NIC_LINUX_SUBVERSION 30
#define NETXEN_NIC_LINUX_VERSIONID "4.0.30"
-#define NETXEN_VERSION_CODE(a, b, c) (((a) << 16) + ((b) << 8) + (c))
+#define NETXEN_VERSION_CODE(a, b, c) (((a) << 24) + ((b) << 16) + (c))
+#define _major(v) (((v) >> 24) & 0xff)
+#define _minor(v) (((v) >> 16) & 0xff)
+#define _build(v) ((v) & 0xffff)
+
+/* version in image has weird encoding:
+ * 7:0 - major
+ * 15:8 - minor
+ * 31:16 - build (little endian)
+ */
+#define NETXEN_DECODE_VERSION(v) \
+ NETXEN_VERSION_CODE(((v) & 0xff), (((v) >> 8) & 0xff), ((v) >> 16))
#define NETXEN_NUM_FLASH_SECTORS (64)
#define NETXEN_FLASH_SECTOR_SIZE (64 * 1024)
@@ -614,6 +625,7 @@
#define NX_P2_MN_ROMIMAGE 0
#define NX_P3_CT_ROMIMAGE 1
#define NX_P3_MN_ROMIMAGE 2
+#define NX_FLASH_ROMIMAGE 3
#define NETXEN_USER_START_OLD NETXEN_PXE_START /* for backward compatibility */
@@ -1243,7 +1255,7 @@
u32 resv3;
u8 has_link_events;
- u8 resv1;
+ u8 fw_type;
u16 tx_context_id;
u16 mtu;
u16 is_up;
@@ -1387,6 +1399,7 @@
int netxen_initialize_adapter_offload(struct netxen_adapter *adapter);
int netxen_phantom_init(struct netxen_adapter *adapter, int pegtune_val);
int netxen_load_firmware(struct netxen_adapter *adapter);
+int netxen_need_fw_reset(struct netxen_adapter *adapter);
void netxen_request_firmware(struct netxen_adapter *adapter);
void netxen_release_firmware(struct netxen_adapter *adapter);
int netxen_pinit_from_rom(struct netxen_adapter *adapter, int verbose);
diff --git a/drivers/net/netxen/netxen_nic_hdr.h b/drivers/net/netxen/netxen_nic_hdr.h
index 3cc0478..8241036 100644
--- a/drivers/net/netxen/netxen_nic_hdr.h
+++ b/drivers/net/netxen/netxen_nic_hdr.h
@@ -853,6 +853,7 @@
#define NX_PEG_TUNE_CAPABILITY (NETXEN_CAM_RAM(0x02c))
#define NETXEN_CAM_RAM_DMA_WATCHDOG_CTRL (0x14)
+#define NETXEN_PEG_ALIVE_COUNTER (NETXEN_CAM_RAM(0xb0))
#define ISR_MSI_INT_TRIGGER(FUNC) (NETXEN_PCIX_PS_REG(PCIX_MSI_F(FUNC)))
#define ISR_LEGACY_INT_TRIGGERED(VAL) (((VAL) & 0x300) == 0x200)
diff --git a/drivers/net/netxen/netxen_nic_init.c b/drivers/net/netxen/netxen_nic_init.c
index 055bb61..b899bd5 100644
--- a/drivers/net/netxen/netxen_nic_init.c
+++ b/drivers/net/netxen/netxen_nic_init.c
@@ -684,11 +684,84 @@
}
int
+netxen_need_fw_reset(struct netxen_adapter *adapter)
+{
+ u32 count, old_count;
+ u32 val, version, major, minor, build;
+ int i, timeout;
+ u8 fw_type;
+
+ /* NX2031 firmware doesn't support heartbit */
+ if (NX_IS_REVISION_P2(adapter->ahw.revision_id))
+ return 1;
+
+ /* last attempt had failed */
+ if (NXRD32(adapter, CRB_CMDPEG_STATE) == PHAN_INITIALIZE_FAILED)
+ return 1;
+
+ old_count = count = NXRD32(adapter, NETXEN_PEG_ALIVE_COUNTER);
+
+ for (i = 0; i < 10; i++) {
+
+ timeout = msleep_interruptible(200);
+ if (timeout) {
+ NXWR32(adapter, CRB_CMDPEG_STATE,
+ PHAN_INITIALIZE_FAILED);
+ return -EINTR;
+ }
+
+ count = NXRD32(adapter, NETXEN_PEG_ALIVE_COUNTER);
+ if (count != old_count)
+ break;
+ }
+
+ /* firmware is dead */
+ if (count == old_count)
+ return 1;
+
+ /* check if we have got newer or different file firmware */
+ if (adapter->fw) {
+
+ const struct firmware *fw = adapter->fw;
+
+ val = cpu_to_le32(*(u32 *)&fw->data[NX_FW_VERSION_OFFSET]);
+ version = NETXEN_DECODE_VERSION(val);
+
+ major = NXRD32(adapter, NETXEN_FW_VERSION_MAJOR);
+ minor = NXRD32(adapter, NETXEN_FW_VERSION_MINOR);
+ build = NXRD32(adapter, NETXEN_FW_VERSION_SUB);
+
+ if (version > NETXEN_VERSION_CODE(major, minor, build))
+ return 1;
+
+ if (version == NETXEN_VERSION_CODE(major, minor, build)) {
+
+ val = NXRD32(adapter, NETXEN_MIU_MN_CONTROL);
+ fw_type = (val & 0x4) ?
+ NX_P3_CT_ROMIMAGE : NX_P3_MN_ROMIMAGE;
+
+ if (adapter->fw_type != fw_type)
+ return 1;
+ }
+ }
+
+ return 0;
+}
+
+static char *fw_name[] = {
+ "nxromimg.bin", "nx3fwct.bin", "nx3fwmn.bin", "flash",
+};
+
+int
netxen_load_firmware(struct netxen_adapter *adapter)
{
u64 *ptr64;
u32 i, flashaddr, size;
const struct firmware *fw = adapter->fw;
+ struct pci_dev *pdev = adapter->pdev;
+
+ dev_info(&pdev->dev, "loading firmware from %s\n",
+ fw_name[adapter->fw_type]);
if (NX_IS_REVISION_P2(adapter->ahw.revision_id))
NXWR32(adapter, NETXEN_ROMUSB_GLB_CAS_RST, 1);
@@ -756,7 +829,7 @@
netxen_validate_firmware(struct netxen_adapter *adapter, const char *fwname)
{
__le32 val;
- u32 major, minor, build, ver, min_ver, bios;
+ u32 ver, min_ver, bios;
struct pci_dev *pdev = adapter->pdev;
const struct firmware *fw = adapter->fw;
@@ -768,21 +841,18 @@
return -EINVAL;
val = cpu_to_le32(*(u32 *)&fw->data[NX_FW_VERSION_OFFSET]);
- major = (__force u32)val & 0xff;
- minor = ((__force u32)val >> 8) & 0xff;
- build = (__force u32)val >> 16;
if (NX_IS_REVISION_P3(adapter->ahw.revision_id))
min_ver = NETXEN_VERSION_CODE(4, 0, 216);
else
min_ver = NETXEN_VERSION_CODE(3, 4, 216);
- ver = NETXEN_VERSION_CODE(major, minor, build);
+ ver = NETXEN_DECODE_VERSION(val);
- if ((major > _NETXEN_NIC_LINUX_MAJOR) || (ver < min_ver)) {
+ if ((_major(ver) > _NETXEN_NIC_LINUX_MAJOR) || (ver < min_ver)) {
dev_err(&pdev->dev,
"%s: firmware version %d.%d.%d unsupported\n",
- fwname, major, minor, build);
+ fwname, _major(ver), _minor(ver), _build(ver));
return -EINVAL;
}
@@ -798,22 +868,21 @@
if (netxen_rom_fast_read(adapter,
NX_FW_VERSION_OFFSET, (int *)&val))
return -EIO;
- major = (__force u32)val & 0xff;
- minor = ((__force u32)val >> 8) & 0xff;
- build = (__force u32)val >> 16;
- if (NETXEN_VERSION_CODE(major, minor, build) > ver)
+ val = NETXEN_DECODE_VERSION(val);
+ if (val > ver) {
+ dev_info(&pdev->dev, "%s: firmware is older than flash\n",
+ fwname);
return -EINVAL;
+ }
NXWR32(adapter, NETXEN_CAM_RAM(0x1fc), NETXEN_BDINFO_MAGIC);
return 0;
}
-static char *fw_name[] = { "nxromimg.bin", "nx3fwct.bin", "nx3fwmn.bin" };
-
void netxen_request_firmware(struct netxen_adapter *adapter)
{
u32 capability, flashed_ver;
- int fw_type;
+ u8 fw_type;
struct pci_dev *pdev = adapter->pdev;
int rc = 0;
@@ -830,6 +899,8 @@
netxen_rom_fast_read(adapter,
NX_FW_VERSION_OFFSET, (int *)&flashed_ver);
+ flashed_ver = NETXEN_DECODE_VERSION(flashed_ver);
+
if (flashed_ver >= NETXEN_VERSION_CODE(4, 0, 220)) {
capability = NXRD32(adapter, NX_PEG_TUNE_CAPABILITY);
if (capability & NX_PEG_TUNE_MN_PRESENT) {
@@ -838,6 +909,10 @@
}
}
+ fw_type = NX_FLASH_ROMIMAGE;
+ adapter->fw = NULL;
+ goto done;
+
request_fw:
rc = request_firmware(&adapter->fw, fw_name[fw_type], &pdev->dev);
if (rc != 0) {
@@ -846,6 +921,7 @@
goto request_mn;
}
+ fw_type = NX_FLASH_ROMIMAGE;
adapter->fw = NULL;
goto done;
}
@@ -859,16 +935,13 @@
goto request_mn;
}
+ fw_type = NX_FLASH_ROMIMAGE;
adapter->fw = NULL;
goto done;
}
done:
- if (adapter->fw)
- dev_info(&pdev->dev, "loading firmware from file %s\n",
- fw_name[fw_type]);
- else
- dev_info(&pdev->dev, "loading firmware from flash\n");
+ adapter->fw_type = fw_type;
}
diff --git a/drivers/net/netxen/netxen_nic_main.c b/drivers/net/netxen/netxen_nic_main.c
index 2919a2d..27539dd 100644
--- a/drivers/net/netxen/netxen_nic_main.c
+++ b/drivers/net/netxen/netxen_nic_main.c
@@ -718,6 +718,10 @@
if (request_fw)
netxen_request_firmware(adapter);
+ err = netxen_need_fw_reset(adapter);
+ if (err <= 0)
+ return err;
+
if (first_boot != 0x55555555) {
NXWR32(adapter, CRB_CMDPEG_STATE, 0);
netxen_pinit_from_rom(adapter, 0);
diff --git a/drivers/net/pci-skeleton.c b/drivers/net/pci-skeleton.c
index 8c1f698..89f7b2a 100644
--- a/drivers/net/pci-skeleton.c
+++ b/drivers/net/pci-skeleton.c
@@ -105,7 +105,7 @@
static char version[] __devinitdata =
KERN_INFO NETDRV_DRIVER_LOAD_MSG "\n"
-KERN_INFO " Support available from http://foo.com/bar/baz.html\n";
+" Support available from http://foo.com/bar/baz.html\n";
/* define to 1 to enable PIO instead of MMIO */
#undef USE_IO_OPS
diff --git a/drivers/net/pcmcia/ibmtr_cs.c b/drivers/net/pcmcia/ibmtr_cs.c
index f51944b..06618af 100644
--- a/drivers/net/pcmcia/ibmtr_cs.c
+++ b/drivers/net/pcmcia/ibmtr_cs.c
@@ -298,14 +298,11 @@
strcpy(info->node.dev_name, dev->name);
- printk(KERN_INFO "%s: port %#3lx, irq %d,",
- dev->name, dev->base_addr, dev->irq);
- printk (" mmio %#5lx,", (u_long)ti->mmio);
- printk (" sram %#5lx,", (u_long)ti->sram_base << 12);
- printk ("\n" KERN_INFO " hwaddr=");
- for (i = 0; i < TR_ALEN; i++)
- printk("%02X", dev->dev_addr[i]);
- printk("\n");
+ printk(KERN_INFO
+ "%s: port %#3lx, irq %d, mmio %#5lx, sram %#5lx, hwaddr=%pM\n",
+ dev->name, dev->base_addr, dev->irq,
+ (u_long)ti->mmio, (u_long)(ti->sram_base << 12),
+ dev->dev_addr);
return 0;
cs_failed:
diff --git a/drivers/net/pcmcia/nmclan_cs.c b/drivers/net/pcmcia/nmclan_cs.c
index 02ef63e..36de91b 100644
--- a/drivers/net/pcmcia/nmclan_cs.c
+++ b/drivers/net/pcmcia/nmclan_cs.c
@@ -1425,15 +1425,12 @@
ladrf[byte] |= (1 << (hashcode & 7));
#ifdef PCMCIA_DEBUG
- if (pc_debug > 2) {
- printk(KERN_DEBUG " adr =");
- for (i = 0; i < 6; i++)
- printk(" %02X", adr[i]);
- printk("\n" KERN_DEBUG " hashcode = %d(decimal), ladrf[0:63]"
- " =", hashcode);
- for (i = 0; i < 8; i++)
- printk(" %02X", ladrf[i]);
- printk("\n");
+ if (pc_debug > 2)
+ printk(KERN_DEBUG " adr =%pM\n", adr);
+ printk(KERN_DEBUG " hashcode = %d(decimal), ladrf[0:63] =", hashcode);
+ for (i = 0; i < 8; i++)
+ printk(KERN_CONT " %02X", ladrf[i]);
+ printk(KERN_CONT "\n");
}
#endif
} /* BuildLAF */
diff --git a/drivers/net/pcmcia/pcnet_cs.c b/drivers/net/pcmcia/pcnet_cs.c
index 652a368..9ef1c1b 100644
--- a/drivers/net/pcmcia/pcnet_cs.c
+++ b/drivers/net/pcmcia/pcnet_cs.c
@@ -1727,6 +1727,7 @@
PCMCIA_DEVICE_PROD_ID12("PRETEC", "Ethernet CompactLAN 10BaseT 3.3V", 0xebf91155, 0x7f5a4f50),
PCMCIA_DEVICE_PROD_ID12("Psion Dacom", "Gold Card Ethernet", 0xf5f025c2, 0x3a30e110),
PCMCIA_DEVICE_PROD_ID12("=RELIA==", "Ethernet", 0xcdd0644a, 0x00b2e941),
+ PCMCIA_DEVICE_PROD_ID12("RIOS Systems Co.", "PC CARD3 ETHERNET", 0x7dd33481, 0x10b41826),
PCMCIA_DEVICE_PROD_ID12("RP", "1625B Ethernet NE2000 Compatible", 0xe3e66e22, 0xb96150df),
PCMCIA_DEVICE_PROD_ID12("RPTI", "EP400 Ethernet NE2000 Compatible", 0xdc6f88fd, 0x4a7e2ae0),
PCMCIA_DEVICE_PROD_ID12("RPTI", "EP401 Ethernet NE2000 Compatible", 0xdc6f88fd, 0x4bcbd7fd),
diff --git a/drivers/net/pcnet32.c b/drivers/net/pcnet32.c
index 1c35e1d..2836815 100644
--- a/drivers/net/pcnet32.c
+++ b/drivers/net/pcnet32.c
@@ -485,7 +485,7 @@
&new_ring_dma_addr);
if (new_tx_ring == NULL) {
if (netif_msg_drv(lp))
- printk("\n" KERN_ERR
+ printk(KERN_ERR
"%s: Consistent memory allocation failed.\n",
dev->name);
return;
@@ -496,7 +496,7 @@
GFP_ATOMIC);
if (!new_dma_addr_list) {
if (netif_msg_drv(lp))
- printk("\n" KERN_ERR
+ printk(KERN_ERR
"%s: Memory allocation failed.\n", dev->name);
goto free_new_tx_ring;
}
@@ -505,7 +505,7 @@
GFP_ATOMIC);
if (!new_skb_list) {
if (netif_msg_drv(lp))
- printk("\n" KERN_ERR
+ printk(KERN_ERR
"%s: Memory allocation failed.\n", dev->name);
goto free_new_lists;
}
@@ -563,7 +563,7 @@
&new_ring_dma_addr);
if (new_rx_ring == NULL) {
if (netif_msg_drv(lp))
- printk("\n" KERN_ERR
+ printk(KERN_ERR
"%s: Consistent memory allocation failed.\n",
dev->name);
return;
@@ -574,7 +574,7 @@
GFP_ATOMIC);
if (!new_dma_addr_list) {
if (netif_msg_drv(lp))
- printk("\n" KERN_ERR
+ printk(KERN_ERR
"%s: Memory allocation failed.\n", dev->name);
goto free_new_rx_ring;
}
@@ -583,7 +583,7 @@
GFP_ATOMIC);
if (!new_skb_list) {
if (netif_msg_drv(lp))
- printk("\n" KERN_ERR
+ printk(KERN_ERR
"%s: Memory allocation failed.\n", dev->name);
goto free_new_lists;
}
@@ -1766,38 +1766,38 @@
/* Version 0x2623 and 0x2624 */
if (((chip_version + 1) & 0xfffe) == 0x2624) {
i = a->read_csr(ioaddr, 80) & 0x0C00; /* Check tx_start_pt */
- printk("\n" KERN_INFO " tx_start_pt(0x%04x):", i);
+ printk(KERN_INFO " tx_start_pt(0x%04x):", i);
switch (i >> 10) {
case 0:
- printk(" 20 bytes,");
+ printk(KERN_CONT " 20 bytes,");
break;
case 1:
- printk(" 64 bytes,");
+ printk(KERN_CONT " 64 bytes,");
break;
case 2:
- printk(" 128 bytes,");
+ printk(KERN_CONT " 128 bytes,");
break;
case 3:
- printk("~220 bytes,");
+ printk(KERN_CONT "~220 bytes,");
break;
}
i = a->read_bcr(ioaddr, 18); /* Check Burst/Bus control */
- printk(" BCR18(%x):", i & 0xffff);
+ printk(KERN_CONT " BCR18(%x):", i & 0xffff);
if (i & (1 << 5))
- printk("BurstWrEn ");
+ printk(KERN_CONT "BurstWrEn ");
if (i & (1 << 6))
- printk("BurstRdEn ");
+ printk(KERN_CONT "BurstRdEn ");
if (i & (1 << 7))
- printk("DWordIO ");
+ printk(KERN_CONT "DWordIO ");
if (i & (1 << 11))
- printk("NoUFlow ");
+ printk(KERN_CONT "NoUFlow ");
i = a->read_bcr(ioaddr, 25);
- printk("\n" KERN_INFO " SRAMSIZE=0x%04x,", i << 8);
+ printk(KERN_INFO " SRAMSIZE=0x%04x,", i << 8);
i = a->read_bcr(ioaddr, 26);
- printk(" SRAM_BND=0x%04x,", i << 8);
+ printk(KERN_CONT " SRAM_BND=0x%04x,", i << 8);
i = a->read_bcr(ioaddr, 27);
if (i & (1 << 14))
- printk("LowLatRx");
+ printk(KERN_CONT "LowLatRx");
}
}
@@ -1996,7 +1996,7 @@
&lp->tx_ring_dma_addr);
if (lp->tx_ring == NULL) {
if (netif_msg_drv(lp))
- printk("\n" KERN_ERR PFX
+ printk(KERN_ERR PFX
"%s: Consistent memory allocation failed.\n",
name);
return -ENOMEM;
@@ -2008,7 +2008,7 @@
&lp->rx_ring_dma_addr);
if (lp->rx_ring == NULL) {
if (netif_msg_drv(lp))
- printk("\n" KERN_ERR PFX
+ printk(KERN_ERR PFX
"%s: Consistent memory allocation failed.\n",
name);
return -ENOMEM;
@@ -2018,7 +2018,7 @@
GFP_ATOMIC);
if (!lp->tx_dma_addr) {
if (netif_msg_drv(lp))
- printk("\n" KERN_ERR PFX
+ printk(KERN_ERR PFX
"%s: Memory allocation failed.\n", name);
return -ENOMEM;
}
@@ -2027,7 +2027,7 @@
GFP_ATOMIC);
if (!lp->rx_dma_addr) {
if (netif_msg_drv(lp))
- printk("\n" KERN_ERR PFX
+ printk(KERN_ERR PFX
"%s: Memory allocation failed.\n", name);
return -ENOMEM;
}
@@ -2036,7 +2036,7 @@
GFP_ATOMIC);
if (!lp->tx_skbuff) {
if (netif_msg_drv(lp))
- printk("\n" KERN_ERR PFX
+ printk(KERN_ERR PFX
"%s: Memory allocation failed.\n", name);
return -ENOMEM;
}
@@ -2045,7 +2045,7 @@
GFP_ATOMIC);
if (!lp->rx_skbuff) {
if (netif_msg_drv(lp))
- printk("\n" KERN_ERR PFX
+ printk(KERN_ERR PFX
"%s: Memory allocation failed.\n", name);
return -ENOMEM;
}
diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c
index 61755cb..eda94fc 100644
--- a/drivers/net/phy/phy.c
+++ b/drivers/net/phy/phy.c
@@ -928,13 +928,32 @@
* Otherwise, it's 0, and we're
* still waiting for AN */
if (err > 0) {
- phydev->state = PHY_RUNNING;
+ err = phy_read_status(phydev);
+ if (err)
+ break;
+
+ if (phydev->link) {
+ phydev->state = PHY_RUNNING;
+ netif_carrier_on(phydev->attached_dev);
+ } else
+ phydev->state = PHY_NOLINK;
+ phydev->adjust_link(phydev->attached_dev);
} else {
phydev->state = PHY_AN;
phydev->link_timeout = PHY_AN_TIMEOUT;
}
- } else
- phydev->state = PHY_RUNNING;
+ } else {
+ err = phy_read_status(phydev);
+ if (err)
+ break;
+
+ if (phydev->link) {
+ phydev->state = PHY_RUNNING;
+ netif_carrier_on(phydev->attached_dev);
+ } else
+ phydev->state = PHY_NOLINK;
+ phydev->adjust_link(phydev->attached_dev);
+ }
break;
}
diff --git a/drivers/net/qlge/qlge.h b/drivers/net/qlge/qlge.h
index 156e02e..6ed5317 100644
--- a/drivers/net/qlge/qlge.h
+++ b/drivers/net/qlge/qlge.h
@@ -1607,6 +1607,8 @@
int ql_cam_route_initialize(struct ql_adapter *qdev);
int ql_read_mpi_reg(struct ql_adapter *qdev, u32 reg, u32 *data);
int ql_mb_about_fw(struct ql_adapter *qdev);
+void ql_link_on(struct ql_adapter *qdev);
+void ql_link_off(struct ql_adapter *qdev);
#if 1
#define QL_ALL_DUMP
diff --git a/drivers/net/qlge/qlge_ethtool.c b/drivers/net/qlge/qlge_ethtool.c
index 37c99fe..eb6a9ee 100644
--- a/drivers/net/qlge/qlge_ethtool.c
+++ b/drivers/net/qlge/qlge_ethtool.c
@@ -59,7 +59,7 @@
cqicb->pkt_delay =
cpu_to_le16(qdev->tx_max_coalesced_frames);
cqicb->flags = FLAGS_LI;
- status = ql_write_cfg(qdev, cqicb, sizeof(cqicb),
+ status = ql_write_cfg(qdev, cqicb, sizeof(*cqicb),
CFG_LCQ, rx_ring->cq_id);
if (status) {
QPRINTK(qdev, IFUP, ERR,
@@ -82,7 +82,7 @@
cqicb->pkt_delay =
cpu_to_le16(qdev->rx_max_coalesced_frames);
cqicb->flags = FLAGS_LI;
- status = ql_write_cfg(qdev, cqicb, sizeof(cqicb),
+ status = ql_write_cfg(qdev, cqicb, sizeof(*cqicb),
CFG_LCQ, rx_ring->cq_id);
if (status) {
QPRINTK(qdev, IFUP, ERR,
diff --git a/drivers/net/qlge/qlge_main.c b/drivers/net/qlge/qlge_main.c
index 90d1f76..5768af1 100644
--- a/drivers/net/qlge/qlge_main.c
+++ b/drivers/net/qlge/qlge_main.c
@@ -214,6 +214,10 @@
return -ENOMEM;
}
+ status = ql_sem_spinlock(qdev, SEM_ICB_MASK);
+ if (status)
+ return status;
+
status = ql_wait_cfg(qdev, bit);
if (status) {
QPRINTK(qdev, IFUP, ERR,
@@ -221,12 +225,8 @@
goto exit;
}
- status = ql_sem_spinlock(qdev, SEM_ICB_MASK);
- if (status)
- goto exit;
ql_write32(qdev, ICB_L, (u32) map);
ql_write32(qdev, ICB_H, (u32) (map >> 32));
- ql_sem_unlock(qdev, SEM_ICB_MASK); /* does flush too */
mask = CFG_Q_MASK | (bit << 16);
value = bit | (q_id << CFG_Q_SHIFT);
@@ -237,6 +237,7 @@
*/
status = ql_wait_cfg(qdev, bit);
exit:
+ ql_sem_unlock(qdev, SEM_ICB_MASK); /* does flush too */
pci_unmap_single(qdev->pdev, map, size, direction);
return status;
}
@@ -412,6 +413,57 @@
return status;
}
+/* Set or clear MAC address in hardware. We sometimes
+ * have to clear it to prevent wrong frame routing
+ * especially in a bonding environment.
+ */
+static int ql_set_mac_addr(struct ql_adapter *qdev, int set)
+{
+ int status;
+ char zero_mac_addr[ETH_ALEN];
+ char *addr;
+
+ if (set) {
+ addr = &qdev->ndev->dev_addr[0];
+ QPRINTK(qdev, IFUP, DEBUG,
+ "Set Mac addr %02x:%02x:%02x:%02x:%02x:%02x\n",
+ addr[0], addr[1], addr[2], addr[3],
+ addr[4], addr[5]);
+ } else {
+ memset(zero_mac_addr, 0, ETH_ALEN);
+ addr = &zero_mac_addr[0];
+ QPRINTK(qdev, IFUP, DEBUG,
+ "Clearing MAC address on %s\n",
+ qdev->ndev->name);
+ }
+ status = ql_sem_spinlock(qdev, SEM_MAC_ADDR_MASK);
+ if (status)
+ return status;
+ status = ql_set_mac_addr_reg(qdev, (u8 *) addr,
+ MAC_ADDR_TYPE_CAM_MAC, qdev->func * MAX_CQ);
+ ql_sem_unlock(qdev, SEM_MAC_ADDR_MASK);
+ if (status)
+ QPRINTK(qdev, IFUP, ERR, "Failed to init mac "
+ "address.\n");
+ return status;
+}
+
+void ql_link_on(struct ql_adapter *qdev)
+{
+ QPRINTK(qdev, LINK, ERR, "%s: Link is up.\n",
+ qdev->ndev->name);
+ netif_carrier_on(qdev->ndev);
+ ql_set_mac_addr(qdev, 1);
+}
+
+void ql_link_off(struct ql_adapter *qdev)
+{
+ QPRINTK(qdev, LINK, ERR, "%s: Link is down.\n",
+ qdev->ndev->name);
+ netif_carrier_off(qdev->ndev);
+ ql_set_mac_addr(qdev, 0);
+}
+
/* Get a specific frame routing value from the CAM.
* Used for debug and reg dump.
*/
@@ -1628,7 +1680,7 @@
tx_ring = &qdev->tx_ring[mac_rsp->txq_idx];
tx_ring_desc = &tx_ring->q[mac_rsp->tid];
ql_unmap_send(qdev, tx_ring_desc, tx_ring_desc->map_cnt);
- qdev->stats.tx_bytes += tx_ring_desc->map_cnt;
+ qdev->stats.tx_bytes += (tx_ring_desc->skb)->len;
qdev->stats.tx_packets++;
dev_kfree_skb(tx_ring_desc->skb);
tx_ring_desc->skb = NULL;
@@ -1660,13 +1712,13 @@
/* Fire up a handler to reset the MPI processor. */
void ql_queue_fw_error(struct ql_adapter *qdev)
{
- netif_carrier_off(qdev->ndev);
+ ql_link_off(qdev);
queue_delayed_work(qdev->workqueue, &qdev->mpi_reset_work, 0);
}
void ql_queue_asic_error(struct ql_adapter *qdev)
{
- netif_carrier_off(qdev->ndev);
+ ql_link_off(qdev);
ql_disable_interrupts(qdev);
/* Clear adapter up bit to signal the recovery
* process that it shouldn't kill the reset worker
@@ -2104,7 +2156,7 @@
}
tx_ring_desc = &tx_ring->q[tx_ring->prod_idx];
mac_iocb_ptr = tx_ring_desc->queue_entry;
- memset((void *)mac_iocb_ptr, 0, sizeof(mac_iocb_ptr));
+ memset((void *)mac_iocb_ptr, 0, sizeof(*mac_iocb_ptr));
mac_iocb_ptr->opcode = OPCODE_OB_MAC_IOCB;
mac_iocb_ptr->tid = tx_ring_desc->index;
@@ -2743,7 +2795,7 @@
ql_init_tx_ring(qdev, tx_ring);
- err = ql_write_cfg(qdev, wqicb, sizeof(wqicb), CFG_LRQ,
+ err = ql_write_cfg(qdev, wqicb, sizeof(*wqicb), CFG_LRQ,
(u16) tx_ring->wq_id);
if (err) {
QPRINTK(qdev, IFUP, ERR, "Failed to load tx_ring.\n");
@@ -3008,7 +3060,7 @@
int i;
u8 *hash_id = (u8 *) ricb->hash_cq_id;
- memset((void *)ricb, 0, sizeof(ricb));
+ memset((void *)ricb, 0, sizeof(*ricb));
ricb->base_cq = qdev->rss_ring_first_cq_id | RSS_L4K;
ricb->flags =
@@ -3030,7 +3082,7 @@
QPRINTK(qdev, IFUP, DEBUG, "Initializing RSS.\n");
- status = ql_write_cfg(qdev, ricb, sizeof(ricb), CFG_LR, 0);
+ status = ql_write_cfg(qdev, ricb, sizeof(*ricb), CFG_LR, 0);
if (status) {
QPRINTK(qdev, IFUP, ERR, "Failed to load RICB.\n");
return status;
@@ -3039,25 +3091,40 @@
return status;
}
+static int ql_clear_routing_entries(struct ql_adapter *qdev)
+{
+ int i, status = 0;
+
+ status = ql_sem_spinlock(qdev, SEM_RT_IDX_MASK);
+ if (status)
+ return status;
+ /* Clear all the entries in the routing table. */
+ for (i = 0; i < 16; i++) {
+ status = ql_set_routing_reg(qdev, i, 0, 0);
+ if (status) {
+ QPRINTK(qdev, IFUP, ERR,
+ "Failed to init routing register for CAM "
+ "packets.\n");
+ break;
+ }
+ }
+ ql_sem_unlock(qdev, SEM_RT_IDX_MASK);
+ return status;
+}
+
/* Initialize the frame-to-queue routing. */
static int ql_route_initialize(struct ql_adapter *qdev)
{
int status = 0;
- int i;
status = ql_sem_spinlock(qdev, SEM_RT_IDX_MASK);
if (status)
return status;
/* Clear all the entries in the routing table. */
- for (i = 0; i < 16; i++) {
- status = ql_set_routing_reg(qdev, i, 0, 0);
- if (status) {
- QPRINTK(qdev, IFUP, ERR,
- "Failed to init routing register for CAM packets.\n");
- goto exit;
- }
- }
+ status = ql_clear_routing_entries(qdev);
+ if (status)
+ goto exit;
status = ql_set_routing_reg(qdev, RT_IDX_ALL_ERR_SLOT, RT_IDX_ERR, 1);
if (status) {
@@ -3096,14 +3163,15 @@
int ql_cam_route_initialize(struct ql_adapter *qdev)
{
- int status;
+ int status, set;
- status = ql_sem_spinlock(qdev, SEM_MAC_ADDR_MASK);
- if (status)
- return status;
- status = ql_set_mac_addr_reg(qdev, (u8 *) qdev->ndev->perm_addr,
- MAC_ADDR_TYPE_CAM_MAC, qdev->func * MAX_CQ);
- ql_sem_unlock(qdev, SEM_MAC_ADDR_MASK);
+ /* If check if the link is up and use to
+ * determine if we are setting or clearing
+ * the MAC address in the CAM.
+ */
+ set = ql_read32(qdev, STS);
+ set &= qdev->port_link_up;
+ status = ql_set_mac_addr(qdev, set);
if (status) {
QPRINTK(qdev, IFUP, ERR, "Failed to init mac address.\n");
return status;
@@ -3210,9 +3278,17 @@
{
u32 value;
int status = 0;
- unsigned long end_jiffies = jiffies +
- max((unsigned long)1, usecs_to_jiffies(30));
+ unsigned long end_jiffies;
+ /* Clear all the entries in the routing table. */
+ status = ql_clear_routing_entries(qdev);
+ if (status) {
+ QPRINTK(qdev, IFUP, ERR, "Failed to clear routing bits.\n");
+ return status;
+ }
+
+ end_jiffies = jiffies +
+ max((unsigned long)1, usecs_to_jiffies(30));
ql_write32(qdev, RST_FO, (RST_FO_FR << 16) | RST_FO_FR);
do {
@@ -3252,7 +3328,7 @@
int i, status = 0;
struct rx_ring *rx_ring;
- netif_carrier_off(qdev->ndev);
+ ql_link_off(qdev);
/* Don't kill the reset worker thread if we
* are in the process of recovery.
@@ -3319,8 +3395,12 @@
}
set_bit(QL_ADAPTER_UP, &qdev->flags);
ql_alloc_rx_buffers(qdev);
- if ((ql_read32(qdev, STS) & qdev->port_init))
- netif_carrier_on(qdev->ndev);
+ /* If the port is initialized and the
+ * link is up the turn on the carrier.
+ */
+ if ((ql_read32(qdev, STS) & qdev->port_init) &&
+ (ql_read32(qdev, STS) & qdev->port_link_up))
+ ql_link_on(qdev);
ql_enable_interrupts(qdev);
ql_enable_all_completion_interrupts(qdev);
netif_tx_start_all_queues(qdev->ndev);
@@ -3346,11 +3426,6 @@
return -ENOMEM;
}
status = ql_request_irq(qdev);
- if (status)
- goto err_irq;
- return status;
-err_irq:
- ql_free_mem_resources(qdev);
return status;
}
@@ -3414,7 +3489,7 @@
for (i = 0; i < qdev->tx_ring_count; i++) {
tx_ring = &qdev->tx_ring[i];
- memset((void *)tx_ring, 0, sizeof(tx_ring));
+ memset((void *)tx_ring, 0, sizeof(*tx_ring));
tx_ring->qdev = qdev;
tx_ring->wq_id = i;
tx_ring->wq_len = qdev->tx_ring_size;
@@ -3430,7 +3505,7 @@
for (i = 0; i < qdev->rx_ring_count; i++) {
rx_ring = &qdev->rx_ring[i];
- memset((void *)rx_ring, 0, sizeof(rx_ring));
+ memset((void *)rx_ring, 0, sizeof(*rx_ring));
rx_ring->qdev = qdev;
rx_ring->cq_id = i;
rx_ring->cpu = i % cpu_cnt; /* CPU to run handler on. */
@@ -3789,7 +3864,7 @@
int pos, err = 0;
u16 val16;
- memset((void *)qdev, 0, sizeof(qdev));
+ memset((void *)qdev, 0, sizeof(*qdev));
err = pci_enable_device(pdev);
if (err) {
dev_err(&pdev->dev, "PCI device enable failed.\n");
@@ -3976,7 +4051,7 @@
pci_disable_device(pdev);
return err;
}
- netif_carrier_off(ndev);
+ ql_link_off(qdev);
ql_display_dev_info(ndev);
cards_found++;
return 0;
diff --git a/drivers/net/qlge/qlge_mpi.c b/drivers/net/qlge/qlge_mpi.c
index 71afbf8..6685bd9 100644
--- a/drivers/net/qlge/qlge_mpi.c
+++ b/drivers/net/qlge/qlge_mpi.c
@@ -238,7 +238,7 @@
&qdev->mpi_port_cfg_work, 0);
}
- netif_carrier_on(qdev->ndev);
+ ql_link_on(qdev);
}
static void ql_link_down(struct ql_adapter *qdev, struct mbox_params *mbcp)
@@ -251,7 +251,7 @@
if (status)
QPRINTK(qdev, DRV, ERR, "Link down AEN broken!\n");
- netif_carrier_off(qdev->ndev);
+ ql_link_off(qdev);
}
static int ql_sfp_in(struct ql_adapter *qdev, struct mbox_params *mbcp)
@@ -849,7 +849,7 @@
case MB_CMD_PORT_RESET:
case MB_CMD_SET_PORT_CFG:
case MB_CMD_STOP_FW:
- netif_carrier_off(qdev->ndev);
+ ql_link_off(qdev);
/* Signal the resulting link up AEN
* that the frame routing and mac addr
* needs to be set.
diff --git a/drivers/net/r6040.c b/drivers/net/r6040.c
index ed63d23..961b539 100644
--- a/drivers/net/r6040.c
+++ b/drivers/net/r6040.c
@@ -49,8 +49,8 @@
#include <asm/processor.h>
#define DRV_NAME "r6040"
-#define DRV_VERSION "0.23"
-#define DRV_RELDATE "05May2009"
+#define DRV_VERSION "0.24"
+#define DRV_RELDATE "08Jul2009"
/* PHY CHIP Address */
#define PHY1_ADDR 1 /* For MAC1 */
@@ -704,8 +704,11 @@
/* Read MISR status and clear */
status = ioread16(ioaddr + MISR);
- if (status == 0x0000 || status == 0xffff)
+ if (status == 0x0000 || status == 0xffff) {
+ /* Restore RDC MAC interrupt */
+ iowrite16(misr, ioaddr + MIER);
return IRQ_NONE;
+ }
/* RX interrupt request */
if (status & RX_INTS) {
diff --git a/drivers/net/sh_eth.c b/drivers/net/sh_eth.c
index 341882f..a2d82dd 100644
--- a/drivers/net/sh_eth.c
+++ b/drivers/net/sh_eth.c
@@ -865,8 +865,7 @@
struct sh_eth_private *mdp = netdev_priv(ndev);
struct sh_eth_cpu_data *cd = mdp->cd;
irqreturn_t ret = IRQ_NONE;
- u32 ioaddr, boguscnt = RX_RING_SIZE;
- u32 intr_status = 0;
+ u32 ioaddr, intr_status = 0;
ioaddr = ndev->base_addr;
spin_lock(&mdp->lock);
@@ -901,12 +900,6 @@
if (intr_status & cd->eesr_err_check)
sh_eth_error(ndev, intr_status);
- if (--boguscnt < 0) {
- printk(KERN_WARNING
- "%s: Too much work at interrupt, status=0x%4.4x.\n",
- ndev->name, intr_status);
- }
-
other_irq:
spin_unlock(&mdp->lock);
diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c
index 7681d28..daf961a 100644
--- a/drivers/net/sky2.c
+++ b/drivers/net/sky2.c
@@ -2495,7 +2495,7 @@
if (likely(status >> 16 == (status & 0xffff))) {
skb = sky2->rx_ring[sky2->rx_next].skb;
skb->ip_summed = CHECKSUM_COMPLETE;
- skb->csum = status & 0xffff;
+ skb->csum = le16_to_cpu(status);
} else {
printk(KERN_NOTICE PFX "%s: hardware receive "
"checksum problem (status = %#x)\n",
diff --git a/drivers/net/smsc911x.c b/drivers/net/smsc911x.c
index b60639b..66067f9 100644
--- a/drivers/net/smsc911x.c
+++ b/drivers/net/smsc911x.c
@@ -1938,7 +1938,7 @@
if (!res)
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- release_mem_region(res->start, res->end - res->start);
+ release_mem_region(res->start, resource_size(res));
iounmap(pdata->ioaddr);
@@ -1976,7 +1976,7 @@
retval = -ENODEV;
goto out_0;
}
- res_size = res->end - res->start + 1;
+ res_size = resource_size(res);
irq_res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
if (!irq_res) {
@@ -2104,7 +2104,7 @@
out_free_netdev_2:
free_netdev(dev);
out_release_io_1:
- release_mem_region(res->start, res->end - res->start);
+ release_mem_region(res->start, resource_size(res));
out_0:
return retval;
}
diff --git a/drivers/net/starfire.c b/drivers/net/starfire.c
index 838cce8..669253c 100644
--- a/drivers/net/starfire.c
+++ b/drivers/net/starfire.c
@@ -180,7 +180,7 @@
/* These identify the driver base version and may not be removed. */
static const char version[] __devinitconst =
KERN_INFO "starfire.c:v1.03 7/26/2000 Written by Donald Becker <becker@scyld.com>\n"
-KERN_INFO " (unofficial 2.2/2.4 kernel port, version " DRV_VERSION ", " DRV_RELDATE ")\n";
+" (unofficial 2.2/2.4 kernel port, version " DRV_VERSION ", " DRV_RELDATE ")\n";
MODULE_AUTHOR("Donald Becker <becker@scyld.com>");
MODULE_DESCRIPTION("Adaptec Starfire Ethernet driver");
diff --git a/drivers/net/sundance.c b/drivers/net/sundance.c
index 545f81b..d1521c3 100644
--- a/drivers/net/sundance.c
+++ b/drivers/net/sundance.c
@@ -1698,13 +1698,13 @@
#ifdef __i386__
if (netif_msg_hw(np)) {
- printk("\n"KERN_DEBUG" Tx ring at %8.8x:\n",
+ printk(KERN_DEBUG " Tx ring at %8.8x:\n",
(int)(np->tx_ring_dma));
for (i = 0; i < TX_RING_SIZE; i++)
- printk(" #%d desc. %4.4x %8.8x %8.8x.\n",
+ printk(KERN_DEBUG " #%d desc. %4.4x %8.8x %8.8x.\n",
i, np->tx_ring[i].status, np->tx_ring[i].frag[0].addr,
np->tx_ring[i].frag[0].length);
- printk("\n"KERN_DEBUG " Rx ring %8.8x:\n",
+ printk(KERN_DEBUG " Rx ring %8.8x:\n",
(int)(np->rx_ring_dma));
for (i = 0; i < /*RX_RING_SIZE*/4 ; i++) {
printk(KERN_DEBUG " #%d desc. %4.4x %4.4x %8.8x\n",
diff --git a/drivers/net/tsi108_eth.c b/drivers/net/tsi108_eth.c
index 0f78f99..7030bd5 100644
--- a/drivers/net/tsi108_eth.c
+++ b/drivers/net/tsi108_eth.c
@@ -1132,7 +1132,9 @@
}
if (!is_valid_ether_addr(dev->dev_addr)) {
- printk("KERN_ERR: word1: %08x, word2: %08x\n", word1, word2);
+ printk(KERN_ERR
+ "%s: Invalid MAC address. word1: %08x, word2: %08x\n",
+ dev->name, word1, word2);
return -EINVAL;
}
@@ -1201,8 +1203,8 @@
__set_bit(hash, &data->mc_hash[0]);
} else {
printk(KERN_ERR
- "%s: got multicast address of length %d "
- "instead of 6.\n", dev->name,
+ "%s: got multicast address of length %d instead of 6.\n",
+ dev->name,
mc->dmi_addrlen);
}
diff --git a/drivers/net/tulip/de2104x.c b/drivers/net/tulip/de2104x.c
index 81f054d..ef49744 100644
--- a/drivers/net/tulip/de2104x.c
+++ b/drivers/net/tulip/de2104x.c
@@ -944,9 +944,10 @@
macmode &= ~FullDuplex;
if (netif_msg_link(de)) {
- printk(KERN_INFO "%s: set link %s\n"
- KERN_INFO "%s: mode 0x%x, sia 0x%x,0x%x,0x%x,0x%x\n"
- KERN_INFO "%s: set mode 0x%x, set sia 0x%x,0x%x,0x%x\n",
+ printk(KERN_INFO
+ "%s: set link %s\n"
+ "%s: mode 0x%x, sia 0x%x,0x%x,0x%x,0x%x\n"
+ "%s: set mode 0x%x, set sia 0x%x,0x%x,0x%x\n",
de->dev->name, media_name[media],
de->dev->name, dr32(MacMode), dr32(SIAStatus),
dr32(CSR13), dr32(CSR14), dr32(CSR15),
diff --git a/drivers/net/tulip/tulip_core.c b/drivers/net/tulip/tulip_core.c
index 2abb5d3..99a6364 100644
--- a/drivers/net/tulip/tulip_core.c
+++ b/drivers/net/tulip/tulip_core.c
@@ -570,16 +570,18 @@
(unsigned int)tp->rx_ring[i].buffer2,
buf[0], buf[1], buf[2]);
for (j = 0; buf[j] != 0xee && j < 1600; j++)
- if (j < 100) printk(" %2.2x", buf[j]);
- printk(" j=%d.\n", j);
+ if (j < 100)
+ printk(KERN_CONT " %2.2x", buf[j]);
+ printk(KERN_CONT " j=%d.\n", j);
}
printk(KERN_DEBUG " Rx ring %8.8x: ", (int)tp->rx_ring);
for (i = 0; i < RX_RING_SIZE; i++)
- printk(" %8.8x", (unsigned int)tp->rx_ring[i].status);
- printk("\n" KERN_DEBUG " Tx ring %8.8x: ", (int)tp->tx_ring);
+ printk(KERN_CONT " %8.8x",
+ (unsigned int)tp->rx_ring[i].status);
+ printk(KERN_DEBUG " Tx ring %8.8x: ", (int)tp->tx_ring);
for (i = 0; i < TX_RING_SIZE; i++)
- printk(" %8.8x", (unsigned int)tp->tx_ring[i].status);
- printk("\n");
+ printk(KERN_CONT " %8.8x", (unsigned int)tp->tx_ring[i].status);
+ printk(KERN_CONT "\n");
}
#endif
diff --git a/drivers/net/tulip/winbond-840.c b/drivers/net/tulip/winbond-840.c
index 842b1a2c..0f15773 100644
--- a/drivers/net/tulip/winbond-840.c
+++ b/drivers/net/tulip/winbond-840.c
@@ -142,7 +142,7 @@
static const char version[] __initconst =
KERN_INFO DRV_NAME ".c:v" DRV_VERSION " (2.4 port) "
DRV_RELDATE " Donald Becker <becker@scyld.com>\n"
- KERN_INFO " http://www.scyld.com/network/drivers.html\n";
+ " http://www.scyld.com/network/drivers.html\n";
MODULE_AUTHOR("Donald Becker <becker@scyld.com>");
MODULE_DESCRIPTION("Winbond W89c840 Ethernet driver");
@@ -939,7 +939,7 @@
printk(KERN_DEBUG " Rx ring %p: ", np->rx_ring);
for (i = 0; i < RX_RING_SIZE; i++)
printk(" %8.8x", (unsigned int)np->rx_ring[i].status);
- printk("\n"KERN_DEBUG" Tx ring %p: ", np->tx_ring);
+ printk(KERN_DEBUG" Tx ring %p: ", np->tx_ring);
for (i = 0; i < TX_RING_SIZE; i++)
printk(" %8.8x", np->tx_ring[i].status);
printk("\n");
@@ -1520,7 +1520,7 @@
printk(KERN_DEBUG " #%d desc. %4.4x %4.4x %8.8x.\n",
i, np->tx_ring[i].length,
np->tx_ring[i].status, np->tx_ring[i].buffer1);
- printk("\n"KERN_DEBUG " Rx ring %8.8x:\n",
+ printk(KERN_DEBUG " Rx ring %8.8x:\n",
(int)np->rx_ring);
for (i = 0; i < RX_RING_SIZE; i++) {
printk(KERN_DEBUG " #%d desc. %4.4x %4.4x %8.8x\n",
diff --git a/drivers/net/tun.c b/drivers/net/tun.c
index 11a0ba4..027f7ab 100644
--- a/drivers/net/tun.c
+++ b/drivers/net/tun.c
@@ -486,12 +486,14 @@
{
struct tun_file *tfile = file->private_data;
struct tun_struct *tun = __tun_get(tfile);
- struct sock *sk = tun->sk;
+ struct sock *sk;
unsigned int mask = 0;
if (!tun)
return POLLERR;
+ sk = tun->sk;
+
DBG(KERN_INFO "%s: tun_chr_poll\n", tun->dev->name);
poll_wait(file, &tun->socket.wait, wait);
@@ -1324,20 +1326,22 @@
struct tun_file *tfile = file->private_data;
struct tun_struct *tun;
-
- rtnl_lock();
tun = __tun_get(tfile);
if (tun) {
- DBG(KERN_INFO "%s: tun_chr_close\n", tun->dev->name);
+ struct net_device *dev = tun->dev;
+
+ DBG(KERN_INFO "%s: tun_chr_close\n", dev->name);
__tun_detach(tun);
/* If desireable, unregister the netdevice. */
- if (!(tun->flags & TUN_PERSIST))
- unregister_netdevice(tun->dev);
-
+ if (!(tun->flags & TUN_PERSIST)) {
+ rtnl_lock();
+ if (dev->reg_state == NETREG_REGISTERED)
+ unregister_netdevice(dev);
+ rtnl_unlock();
+ }
}
- rtnl_unlock();
tun = tfile->tun;
if (tun)
diff --git a/drivers/net/usb/cdc_eem.c b/drivers/net/usb/cdc_eem.c
index 80e0177..cd35d50 100644
--- a/drivers/net/usb/cdc_eem.c
+++ b/drivers/net/usb/cdc_eem.c
@@ -319,7 +319,7 @@
return crc == crc2;
if (unlikely(crc != crc2)) {
- dev->stats.rx_errors++;
+ dev->net->stats.rx_errors++;
dev_kfree_skb_any(skb2);
} else
usbnet_skb_return(dev, skb2);
diff --git a/drivers/net/usb/dm9601.c b/drivers/net/usb/dm9601.c
index 7ae8244..1d3730d 100644
--- a/drivers/net/usb/dm9601.c
+++ b/drivers/net/usb/dm9601.c
@@ -513,11 +513,11 @@
len = (skb->data[1] | (skb->data[2] << 8)) - 4;
if (unlikely(status & 0xbf)) {
- if (status & 0x01) dev->stats.rx_fifo_errors++;
- if (status & 0x02) dev->stats.rx_crc_errors++;
- if (status & 0x04) dev->stats.rx_frame_errors++;
- if (status & 0x20) dev->stats.rx_missed_errors++;
- if (status & 0x90) dev->stats.rx_length_errors++;
+ if (status & 0x01) dev->net->stats.rx_fifo_errors++;
+ if (status & 0x02) dev->net->stats.rx_crc_errors++;
+ if (status & 0x04) dev->net->stats.rx_frame_errors++;
+ if (status & 0x20) dev->net->stats.rx_missed_errors++;
+ if (status & 0x90) dev->net->stats.rx_length_errors++;
return 0;
}
diff --git a/drivers/net/usb/net1080.c b/drivers/net/usb/net1080.c
index 034e8a7..aeb1ab0 100644
--- a/drivers/net/usb/net1080.c
+++ b/drivers/net/usb/net1080.c
@@ -433,7 +433,7 @@
dbg("rx framesize %d range %d..%d mtu %d", skb->len,
net->hard_header_len, dev->hard_mtu, net->mtu);
#endif
- dev->stats.rx_frame_errors++;
+ dev->net->stats.rx_frame_errors++;
nc_ensure_sync(dev);
return 0;
}
@@ -442,12 +442,12 @@
hdr_len = le16_to_cpup(&header->hdr_len);
packet_len = le16_to_cpup(&header->packet_len);
if (FRAMED_SIZE(packet_len) > NC_MAX_PACKET) {
- dev->stats.rx_frame_errors++;
+ dev->net->stats.rx_frame_errors++;
dbg("packet too big, %d", packet_len);
nc_ensure_sync(dev);
return 0;
} else if (hdr_len < MIN_HEADER) {
- dev->stats.rx_frame_errors++;
+ dev->net->stats.rx_frame_errors++;
dbg("header too short, %d", hdr_len);
nc_ensure_sync(dev);
return 0;
@@ -465,21 +465,21 @@
if ((packet_len & 0x01) == 0) {
if (skb->data [packet_len] != PAD_BYTE) {
- dev->stats.rx_frame_errors++;
+ dev->net->stats.rx_frame_errors++;
dbg("bad pad");
return 0;
}
skb_trim(skb, skb->len - 1);
}
if (skb->len != packet_len) {
- dev->stats.rx_frame_errors++;
+ dev->net->stats.rx_frame_errors++;
dbg("bad packet len %d (expected %d)",
skb->len, packet_len);
nc_ensure_sync(dev);
return 0;
}
if (header->packet_id != get_unaligned(&trailer->packet_id)) {
- dev->stats.rx_fifo_errors++;
+ dev->net->stats.rx_fifo_errors++;
dbg("(2+ dropped) rx packet_id mismatch 0x%x 0x%x",
le16_to_cpu(header->packet_id),
le16_to_cpu(trailer->packet_id));
diff --git a/drivers/net/usb/rndis_host.c b/drivers/net/usb/rndis_host.c
index 1bf243e..2232232 100644
--- a/drivers/net/usb/rndis_host.c
+++ b/drivers/net/usb/rndis_host.c
@@ -487,7 +487,7 @@
if (unlikely(hdr->msg_type != RNDIS_MSG_PACKET
|| skb->len < msg_len
|| (data_offset + data_len + 8) > msg_len)) {
- dev->stats.rx_frame_errors++;
+ dev->net->stats.rx_frame_errors++;
devdbg(dev, "bad rndis message %d/%d/%d/%d, len %d",
le32_to_cpu(hdr->msg_type),
msg_len, data_offset, data_len, skb->len);
diff --git a/drivers/net/usb/smsc95xx.c b/drivers/net/usb/smsc95xx.c
index 89a91f8..fe04589 100644
--- a/drivers/net/usb/smsc95xx.c
+++ b/drivers/net/usb/smsc95xx.c
@@ -1108,18 +1108,18 @@
if (unlikely(header & RX_STS_ES_)) {
if (netif_msg_rx_err(dev))
devdbg(dev, "Error header=0x%08x", header);
- dev->stats.rx_errors++;
- dev->stats.rx_dropped++;
+ dev->net->stats.rx_errors++;
+ dev->net->stats.rx_dropped++;
if (header & RX_STS_CRC_) {
- dev->stats.rx_crc_errors++;
+ dev->net->stats.rx_crc_errors++;
} else {
if (header & (RX_STS_TL_ | RX_STS_RF_))
- dev->stats.rx_frame_errors++;
+ dev->net->stats.rx_frame_errors++;
if ((header & RX_STS_LE_) &&
(!(header & RX_STS_FT_)))
- dev->stats.rx_length_errors++;
+ dev->net->stats.rx_length_errors++;
}
} else {
/* ETH_FRAME_LEN + 4(CRC) + 2(COE) + 4(Vlan) */
diff --git a/drivers/net/usb/usbnet.c b/drivers/net/usb/usbnet.c
index 22c0585..edfd9e1 100644
--- a/drivers/net/usb/usbnet.c
+++ b/drivers/net/usb/usbnet.c
@@ -234,8 +234,8 @@
int status;
skb->protocol = eth_type_trans (skb, dev->net);
- dev->stats.rx_packets++;
- dev->stats.rx_bytes += skb->len;
+ dev->net->stats.rx_packets++;
+ dev->net->stats.rx_bytes += skb->len;
if (netif_msg_rx_status (dev))
devdbg (dev, "< rx, len %zu, type 0x%x",
@@ -397,7 +397,7 @@
if (netif_msg_rx_err (dev))
devdbg (dev, "drop");
error:
- dev->stats.rx_errors++;
+ dev->net->stats.rx_errors++;
skb_queue_tail (&dev->done, skb);
}
}
@@ -420,8 +420,8 @@
case 0:
if (skb->len < dev->net->hard_header_len) {
entry->state = rx_cleanup;
- dev->stats.rx_errors++;
- dev->stats.rx_length_errors++;
+ dev->net->stats.rx_errors++;
+ dev->net->stats.rx_length_errors++;
if (netif_msg_rx_err (dev))
devdbg (dev, "rx length %d", skb->len);
}
@@ -433,7 +433,7 @@
* storm, recovering as needed.
*/
case -EPIPE:
- dev->stats.rx_errors++;
+ dev->net->stats.rx_errors++;
usbnet_defer_kevent (dev, EVENT_RX_HALT);
// FALLTHROUGH
@@ -451,7 +451,7 @@
case -EPROTO:
case -ETIME:
case -EILSEQ:
- dev->stats.rx_errors++;
+ dev->net->stats.rx_errors++;
if (!timer_pending (&dev->delay)) {
mod_timer (&dev->delay, jiffies + THROTTLE_JIFFIES);
if (netif_msg_link (dev))
@@ -465,12 +465,12 @@
/* data overrun ... flush fifo? */
case -EOVERFLOW:
- dev->stats.rx_over_errors++;
+ dev->net->stats.rx_over_errors++;
// FALLTHROUGH
default:
entry->state = rx_cleanup;
- dev->stats.rx_errors++;
+ dev->net->stats.rx_errors++;
if (netif_msg_rx_err (dev))
devdbg (dev, "rx status %d", urb_status);
break;
@@ -583,8 +583,8 @@
if (netif_msg_ifdown (dev))
devinfo (dev, "stop stats: rx/tx %ld/%ld, errs %ld/%ld",
- dev->stats.rx_packets, dev->stats.tx_packets,
- dev->stats.rx_errors, dev->stats.tx_errors
+ net->stats.rx_packets, net->stats.tx_packets,
+ net->stats.rx_errors, net->stats.tx_errors
);
// ensure there are no more active urbs
@@ -891,10 +891,10 @@
struct usbnet *dev = entry->dev;
if (urb->status == 0) {
- dev->stats.tx_packets++;
- dev->stats.tx_bytes += entry->length;
+ dev->net->stats.tx_packets++;
+ dev->net->stats.tx_bytes += entry->length;
} else {
- dev->stats.tx_errors++;
+ dev->net->stats.tx_errors++;
switch (urb->status) {
case -EPIPE:
@@ -1020,7 +1020,7 @@
devdbg (dev, "drop, code %d", retval);
drop:
retval = NET_XMIT_SUCCESS;
- dev->stats.tx_dropped++;
+ dev->net->stats.tx_dropped++;
if (skb)
dev_kfree_skb_any (skb);
usb_free_urb (urb);
diff --git a/drivers/net/veth.c b/drivers/net/veth.c
index 87197dd..1097c72 100644
--- a/drivers/net/veth.c
+++ b/drivers/net/veth.c
@@ -208,11 +208,14 @@
static struct net_device_stats *veth_get_stats(struct net_device *dev)
{
- struct veth_priv *priv = netdev_priv(dev);
- struct net_device_stats *dev_stats = &dev->stats;
- unsigned int cpu;
+ struct veth_priv *priv;
+ struct net_device_stats *dev_stats;
+ int cpu;
struct veth_net_stats *stats;
+ priv = netdev_priv(dev);
+ dev_stats = &dev->stats;
+
dev_stats->rx_packets = 0;
dev_stats->tx_packets = 0;
dev_stats->rx_bytes = 0;
@@ -220,17 +223,16 @@
dev_stats->tx_dropped = 0;
dev_stats->rx_dropped = 0;
- if (priv->stats)
- for_each_online_cpu(cpu) {
- stats = per_cpu_ptr(priv->stats, cpu);
+ for_each_online_cpu(cpu) {
+ stats = per_cpu_ptr(priv->stats, cpu);
- dev_stats->rx_packets += stats->rx_packets;
- dev_stats->tx_packets += stats->tx_packets;
- dev_stats->rx_bytes += stats->rx_bytes;
- dev_stats->tx_bytes += stats->tx_bytes;
- dev_stats->tx_dropped += stats->tx_dropped;
- dev_stats->rx_dropped += stats->rx_dropped;
- }
+ dev_stats->rx_packets += stats->rx_packets;
+ dev_stats->tx_packets += stats->tx_packets;
+ dev_stats->rx_bytes += stats->rx_bytes;
+ dev_stats->tx_bytes += stats->tx_bytes;
+ dev_stats->tx_dropped += stats->tx_dropped;
+ dev_stats->rx_dropped += stats->rx_dropped;
+ }
return dev_stats;
}
@@ -257,8 +259,6 @@
netif_carrier_off(dev);
netif_carrier_off(priv->peer);
- free_percpu(priv->stats);
- priv->stats = NULL;
return 0;
}
@@ -289,6 +289,15 @@
return 0;
}
+static void veth_dev_free(struct net_device *dev)
+{
+ struct veth_priv *priv;
+
+ priv = netdev_priv(dev);
+ free_percpu(priv->stats);
+ free_netdev(dev);
+}
+
static const struct net_device_ops veth_netdev_ops = {
.ndo_init = veth_dev_init,
.ndo_open = veth_open,
@@ -306,7 +315,7 @@
dev->netdev_ops = &veth_netdev_ops;
dev->ethtool_ops = &veth_ethtool_ops;
dev->features |= NETIF_F_LLTX;
- dev->destructor = free_netdev;
+ dev->destructor = veth_dev_free;
}
/*
diff --git a/drivers/net/wan/hd64570.c b/drivers/net/wan/hd64570.c
index 223238d..1ea1ef6 100644
--- a/drivers/net/wan/hd64570.c
+++ b/drivers/net/wan/hd64570.c
@@ -584,8 +584,9 @@
sca_in(DSR_RX(phy_node(port)), card) & DSR_DE ? "" : "in");
for (cnt = 0; cnt < port_to_card(port)->rx_ring_buffers; cnt++)
printk(" %02X", readb(&(desc_address(port, cnt, 0)->stat)));
+ printk(KERN_CONT "\n");
- printk("\n" KERN_DEBUG "TX ring: CDA=%u EDA=%u DSR=%02X in=%u "
+ printk(KERN_DEBUG "TX ring: CDA=%u EDA=%u DSR=%02X in=%u "
"last=%u %sactive",
sca_inw(get_dmac_tx(port) + CDAL, card),
sca_inw(get_dmac_tx(port) + EDAL, card),
diff --git a/drivers/net/wan/hd64572.c b/drivers/net/wan/hd64572.c
index 497b003..f099c34 100644
--- a/drivers/net/wan/hd64572.c
+++ b/drivers/net/wan/hd64572.c
@@ -529,8 +529,9 @@
sca_in(DSR_RX(port->chan), card) & DSR_DE ? "" : "in");
for (cnt = 0; cnt < port->card->rx_ring_buffers; cnt++)
printk(" %02X", readb(&(desc_address(port, cnt, 0)->stat)));
+ printk(KERN_CONT "\n");
- printk("\n" KERN_DEBUG "TX ring: CDA=%u EDA=%u DSR=%02X in=%u "
+ printk(KERN_DEBUG "TX ring: CDA=%u EDA=%u DSR=%02X in=%u "
"last=%u %sactive",
sca_inl(get_dmac_tx(port) + CDAL, card),
sca_inl(get_dmac_tx(port) + EDAL, card),
diff --git a/drivers/net/wan/sbni.c b/drivers/net/wan/sbni.c
index 3fb9dbc..d14e95a 100644
--- a/drivers/net/wan/sbni.c
+++ b/drivers/net/wan/sbni.c
@@ -326,11 +326,9 @@
}
if (pci_irq_line <= 0 || pci_irq_line >= nr_irqs)
- printk( KERN_WARNING " WARNING: The PCI BIOS assigned "
- "this PCI card to IRQ %d, which is unlikely "
- "to work!.\n"
- KERN_WARNING " You should use the PCI BIOS "
- "setup to assign a valid IRQ line.\n",
+ printk( KERN_WARNING
+ " WARNING: The PCI BIOS assigned this PCI card to IRQ %d, which is unlikely to work!.\n"
+ " You should use the PCI BIOS setup to assign a valid IRQ line.\n",
pci_irq_line );
/* avoiding re-enable dual adapters */
diff --git a/drivers/net/wireless/ath/Kconfig b/drivers/net/wireless/ath/Kconfig
index d26e7b4..eb0337c 100644
--- a/drivers/net/wireless/ath/Kconfig
+++ b/drivers/net/wireless/ath/Kconfig
@@ -1,5 +1,6 @@
config ATH_COMMON
tristate "Atheros Wireless Cards"
+ depends on WLAN_80211
depends on ATH5K || ATH9K || AR9170_USB
source "drivers/net/wireless/ath/ath5k/Kconfig"
diff --git a/drivers/net/wireless/ath/ath9k/xmit.c b/drivers/net/wireless/ath/ath9k/xmit.c
index b61a071..4ccf48e 100644
--- a/drivers/net/wireless/ath/ath9k/xmit.c
+++ b/drivers/net/wireless/ath/ath9k/xmit.c
@@ -355,7 +355,14 @@
}
if (bf_next == NULL) {
- INIT_LIST_HEAD(&bf_head);
+ /*
+ * Make sure the last desc is reclaimed if it
+ * not a holding desc.
+ */
+ if (!bf_last->bf_stale)
+ list_move_tail(&bf->list, &bf_head);
+ else
+ INIT_LIST_HEAD(&bf_head);
} else {
ASSERT(!list_empty(bf_q));
list_move_tail(&bf->list, &bf_head);
diff --git a/drivers/net/wireless/b43/b43.h b/drivers/net/wireless/b43/b43.h
index f580c2812..4044806 100644
--- a/drivers/net/wireless/b43/b43.h
+++ b/drivers/net/wireless/b43/b43.h
@@ -648,6 +648,7 @@
u8 nr_devs;
bool radiotap_enabled;
+ bool radio_enabled;
/* The beacon we are currently using (AP or IBSS mode).
* This beacon stuff is protected by the irq_lock. */
diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c
index 6456afe..e71c8d9 100644
--- a/drivers/net/wireless/b43/main.c
+++ b/drivers/net/wireless/b43/main.c
@@ -3497,8 +3497,8 @@
if (phy->ops->set_rx_antenna)
phy->ops->set_rx_antenna(dev, antenna);
- if (!!conf->radio_enabled != phy->radio_on) {
- if (conf->radio_enabled) {
+ if (wl->radio_enabled != phy->radio_on) {
+ if (wl->radio_enabled) {
b43_software_rfkill(dev, false);
b43info(dev->wl, "Radio turned on by software\n");
if (!dev->radio_hw_enable) {
@@ -4339,6 +4339,7 @@
wl->beacon0_uploaded = 0;
wl->beacon1_uploaded = 0;
wl->beacon_templates_virgin = 1;
+ wl->radio_enabled = 1;
mutex_lock(&wl->mutex);
@@ -4378,6 +4379,7 @@
if (b43_status(dev) >= B43_STAT_STARTED)
b43_wireless_core_stop(dev);
b43_wireless_core_exit(dev);
+ wl->radio_enabled = 0;
mutex_unlock(&wl->mutex);
cancel_work_sync(&(wl->txpower_adjust_work));
@@ -4560,6 +4562,7 @@
B43_WARN_ON(1);
dev->phy.gmode = have_2ghz_phy;
+ dev->phy.radio_on = 1;
tmp = dev->phy.gmode ? B43_TMSLOW_GMODE : 0;
b43_wireless_core_reset(dev, tmp);
diff --git a/drivers/net/wireless/b43/pcmcia.c b/drivers/net/wireless/b43/pcmcia.c
index 3cfc303..6c3a749 100644
--- a/drivers/net/wireless/b43/pcmcia.c
+++ b/drivers/net/wireless/b43/pcmcia.c
@@ -35,6 +35,7 @@
static /*const */ struct pcmcia_device_id b43_pcmcia_tbl[] = {
PCMCIA_DEVICE_MANF_CARD(0x2D0, 0x448),
+ PCMCIA_DEVICE_MANF_CARD(0x2D0, 0x476),
PCMCIA_DEVICE_NULL,
};
diff --git a/drivers/net/wireless/b43legacy/b43legacy.h b/drivers/net/wireless/b43legacy/b43legacy.h
index 77fda14..038baa8 100644
--- a/drivers/net/wireless/b43legacy/b43legacy.h
+++ b/drivers/net/wireless/b43legacy/b43legacy.h
@@ -607,6 +607,7 @@
u8 nr_devs;
bool radiotap_enabled;
+ bool radio_enabled;
/* The beacon we are currently using (AP or IBSS mode).
* This beacon stuff is protected by the irq_lock. */
diff --git a/drivers/net/wireless/b43legacy/main.c b/drivers/net/wireless/b43legacy/main.c
index e5136fb..c4973c1 100644
--- a/drivers/net/wireless/b43legacy/main.c
+++ b/drivers/net/wireless/b43legacy/main.c
@@ -2689,8 +2689,8 @@
/* Antennas for RX and management frame TX. */
b43legacy_mgmtframe_txantenna(dev, antenna_tx);
- if (!!conf->radio_enabled != phy->radio_on) {
- if (conf->radio_enabled) {
+ if (wl->radio_enabled != phy->radio_on) {
+ if (wl->radio_enabled) {
b43legacy_radio_turn_on(dev);
b43legacyinfo(dev->wl, "Radio turned on by software\n");
if (!dev->radio_hw_enable)
@@ -3441,6 +3441,7 @@
wl->beacon0_uploaded = 0;
wl->beacon1_uploaded = 0;
wl->beacon_templates_virgin = 1;
+ wl->radio_enabled = 1;
mutex_lock(&wl->mutex);
@@ -3479,6 +3480,7 @@
if (b43legacy_status(dev) >= B43legacy_STAT_STARTED)
b43legacy_wireless_core_stop(dev);
b43legacy_wireless_core_exit(dev);
+ wl->radio_enabled = 0;
mutex_unlock(&wl->mutex);
}
@@ -3620,6 +3622,7 @@
have_bphy = 1;
dev->phy.gmode = (have_gphy || have_bphy);
+ dev->phy.radio_on = 1;
tmp = dev->phy.gmode ? B43legacy_TMSLOW_GMODE : 0;
b43legacy_wireless_core_reset(dev, tmp);
diff --git a/drivers/net/wireless/iwmc3200wifi/Kconfig b/drivers/net/wireless/iwmc3200wifi/Kconfig
index 1eccb6d..030401d 100644
--- a/drivers/net/wireless/iwmc3200wifi/Kconfig
+++ b/drivers/net/wireless/iwmc3200wifi/Kconfig
@@ -4,6 +4,15 @@
depends on CFG80211
select WIRELESS_EXT
select FW_LOADER
+ help
+ The Intel Wireless Multicomm 3200 hardware is a combo
+ card with GPS, Bluetooth, WiMax and 802.11 radios. It
+ runs over SDIO and is typically found on Moorestown
+ based platform. This driver takes care of the 802.11
+ part, which is a fullmac one.
+
+ If you choose to build it as a module, it'll be called
+ iwmc3200wifi.ko.
config IWM_DEBUG
bool "Enable full debugging output in iwmc3200wifi"
diff --git a/drivers/net/wireless/mac80211_hwsim.c b/drivers/net/wireless/mac80211_hwsim.c
index e789c6e..a111bda 100644
--- a/drivers/net/wireless/mac80211_hwsim.c
+++ b/drivers/net/wireless/mac80211_hwsim.c
@@ -418,6 +418,7 @@
continue;
if (!data2->started || !hwsim_ps_rx_ok(data2, skb) ||
+ !data->channel || !data2->channel ||
data->channel->center_freq != data2->channel->center_freq ||
!(data->group & data2->group))
continue;
diff --git a/drivers/net/wireless/p54/p54common.c b/drivers/net/wireless/p54/p54common.c
index b618bd1..22ca122 100644
--- a/drivers/net/wireless/p54/p54common.c
+++ b/drivers/net/wireless/p54/p54common.c
@@ -823,30 +823,30 @@
struct p54_tx_info *range;
unsigned long flags;
- if (unlikely(!skb || !dev || skb_queue_empty(&priv->tx_queue)))
+ if (unlikely(!skb || !dev || !skb_queue_len(&priv->tx_queue)))
return;
- /* There used to be a check here to see if the SKB was on the
- * TX queue or not. This can never happen because all SKBs we
- * see here successfully went through p54_assign_address()
- * which means the SKB is on the ->tx_queue.
+ /*
+ * don't try to free an already unlinked skb
*/
+ if (unlikely((!skb->next) || (!skb->prev)))
+ return;
spin_lock_irqsave(&priv->tx_queue.lock, flags);
info = IEEE80211_SKB_CB(skb);
range = (void *)info->rate_driver_data;
- if (!skb_queue_is_first(&priv->tx_queue, skb)) {
+ if (skb->prev != (struct sk_buff *)&priv->tx_queue) {
struct ieee80211_tx_info *ni;
struct p54_tx_info *mr;
- ni = IEEE80211_SKB_CB(skb_queue_prev(&priv->tx_queue, skb));
+ ni = IEEE80211_SKB_CB(skb->prev);
mr = (struct p54_tx_info *)ni->rate_driver_data;
}
- if (!skb_queue_is_last(&priv->tx_queue, skb)) {
+ if (skb->next != (struct sk_buff *)&priv->tx_queue) {
struct ieee80211_tx_info *ni;
struct p54_tx_info *mr;
- ni = IEEE80211_SKB_CB(skb_queue_next(&priv->tx_queue, skb));
+ ni = IEEE80211_SKB_CB(skb->next);
mr = (struct p54_tx_info *)ni->rate_driver_data;
}
__skb_unlink(skb, &priv->tx_queue);
@@ -864,13 +864,15 @@
unsigned long flags;
spin_lock_irqsave(&priv->tx_queue.lock, flags);
- skb_queue_walk(&priv->tx_queue, entry) {
+ entry = priv->tx_queue.next;
+ while (entry != (struct sk_buff *)&priv->tx_queue) {
struct p54_hdr *hdr = (struct p54_hdr *) entry->data;
if (hdr->req_id == req_id) {
spin_unlock_irqrestore(&priv->tx_queue.lock, flags);
return entry;
}
+ entry = entry->next;
}
spin_unlock_irqrestore(&priv->tx_queue.lock, flags);
return NULL;
@@ -888,33 +890,36 @@
int count, idx;
spin_lock_irqsave(&priv->tx_queue.lock, flags);
- skb_queue_walk(&priv->tx_queue, entry) {
+ entry = (struct sk_buff *) priv->tx_queue.next;
+ while (entry != (struct sk_buff *)&priv->tx_queue) {
struct ieee80211_tx_info *info = IEEE80211_SKB_CB(entry);
struct p54_hdr *entry_hdr;
struct p54_tx_data *entry_data;
unsigned int pad = 0, frame_len;
range = (void *)info->rate_driver_data;
- if (range->start_addr != addr)
+ if (range->start_addr != addr) {
+ entry = entry->next;
continue;
+ }
- if (!skb_queue_is_last(&priv->tx_queue, entry)) {
+ if (entry->next != (struct sk_buff *)&priv->tx_queue) {
struct ieee80211_tx_info *ni;
struct p54_tx_info *mr;
- ni = IEEE80211_SKB_CB(skb_queue_next(&priv->tx_queue,
- entry));
+ ni = IEEE80211_SKB_CB(entry->next);
mr = (struct p54_tx_info *)ni->rate_driver_data;
}
__skb_unlink(entry, &priv->tx_queue);
- spin_unlock_irqrestore(&priv->tx_queue.lock, flags);
frame_len = entry->len;
entry_hdr = (struct p54_hdr *) entry->data;
entry_data = (struct p54_tx_data *) entry_hdr->data;
- priv->tx_stats[entry_data->hw_queue].len--;
+ if (priv->tx_stats[entry_data->hw_queue].len)
+ priv->tx_stats[entry_data->hw_queue].len--;
priv->stats.dot11ACKFailureCount += payload->tries - 1;
+ spin_unlock_irqrestore(&priv->tx_queue.lock, flags);
/*
* Frames in P54_QUEUE_FWSCAN and P54_QUEUE_BEACON are
@@ -1164,21 +1169,23 @@
}
}
- skb_queue_walk(&priv->tx_queue, entry) {
+ entry = priv->tx_queue.next;
+ while (left--) {
u32 hole_size;
info = IEEE80211_SKB_CB(entry);
range = (void *)info->rate_driver_data;
hole_size = range->start_addr - last_addr;
if (!target_skb && hole_size >= len) {
- target_skb = skb_queue_prev(&priv->tx_queue, entry);
+ target_skb = entry->prev;
hole_size -= len;
target_addr = last_addr;
}
largest_hole = max(largest_hole, hole_size);
last_addr = range->end_addr;
+ entry = entry->next;
}
if (!target_skb && priv->rx_end - last_addr >= len) {
- target_skb = skb_peek_tail(&priv->tx_queue);
+ target_skb = priv->tx_queue.prev;
largest_hole = max(largest_hole, priv->rx_end - last_addr - len);
if (!skb_queue_empty(&priv->tx_queue)) {
info = IEEE80211_SKB_CB(target_skb);
@@ -2084,6 +2091,7 @@
static void p54_stop(struct ieee80211_hw *dev)
{
struct p54_common *priv = dev->priv;
+ struct sk_buff *skb;
mutex_lock(&priv->conf_mutex);
priv->mode = NL80211_IFTYPE_UNSPECIFIED;
@@ -2098,7 +2106,8 @@
p54_tx_cancel(dev, priv->cached_beacon);
priv->stop(dev);
- skb_queue_purge(&priv->tx_queue);
+ while ((skb = skb_dequeue(&priv->tx_queue)))
+ kfree_skb(skb);
priv->cached_beacon = NULL;
priv->tsf_high32 = priv->tsf_low32 = 0;
mutex_unlock(&priv->conf_mutex);
diff --git a/drivers/net/wireless/ray_cs.c b/drivers/net/wireless/ray_cs.c
index b10b038..698b11b 100644
--- a/drivers/net/wireless/ray_cs.c
+++ b/drivers/net/wireless/ray_cs.c
@@ -2427,11 +2427,10 @@
#ifdef PCMCIA_DEBUG
if (pc_debug > 3) {
- int i;
- printk(KERN_DEBUG "skb->data before untranslate");
- for (i = 0; i < 64; i++)
- printk("%02x ", skb->data[i]);
- printk("\n" KERN_DEBUG
+ print_hex_dump(KERN_DEBUG, "skb->data before untranslate: ",
+ DUMP_PREFIX_NONE, 16, 1,
+ skb->data, 64, true);
+ printk(KERN_DEBUG
"type = %08x, xsap = %02x%02x%02x, org = %02x02x02x\n",
ntohs(type), psnap->dsap, psnap->ssap, psnap->ctrl,
psnap->org[0], psnap->org[1], psnap->org[2]);
diff --git a/drivers/net/wireless/wavelan_cs.c b/drivers/net/wireless/wavelan_cs.c
index 6af7064..c6d3006 100644
--- a/drivers/net/wireless/wavelan_cs.c
+++ b/drivers/net/wireless/wavelan_cs.c
@@ -3556,17 +3556,8 @@
cfblk.rcvstop = TRUE; /* Enable Receive Stop Register */
#ifdef DEBUG_I82593_SHOW
- {
- u_char *c = (u_char *) &cfblk;
- int i;
- printk(KERN_DEBUG "wavelan_cs: config block:");
- for(i = 0; i < sizeof(struct i82593_conf_block); i++,c++)
- {
- if((i % 16) == 0) printk("\n" KERN_DEBUG);
- printk("%02x ", *c);
- }
- printk("\n");
- }
+ print_hex_dump(KERN_DEBUG, "wavelan_cs: config block: ", DUMP_PREFIX_NONE,
+ 16, 1, &cfblk, sizeof(struct i82593_conf_block), false);
#endif
/* Copy the config block to the i82593 */
diff --git a/drivers/net/wireless/zd1211rw/zd_usb.c b/drivers/net/wireless/zd1211rw/zd_usb.c
index 14a19ba..0e6e446 100644
--- a/drivers/net/wireless/zd1211rw/zd_usb.c
+++ b/drivers/net/wireless/zd1211rw/zd_usb.c
@@ -38,7 +38,6 @@
/* ZD1211 */
{ USB_DEVICE(0x0ace, 0x1211), .driver_info = DEVICE_ZD1211 },
{ USB_DEVICE(0x0ace, 0xa211), .driver_info = DEVICE_ZD1211 },
- { USB_DEVICE(0x07b8, 0x6001), .driver_info = DEVICE_ZD1211 },
{ USB_DEVICE(0x126f, 0xa006), .driver_info = DEVICE_ZD1211 },
{ USB_DEVICE(0x6891, 0xa727), .driver_info = DEVICE_ZD1211 },
{ USB_DEVICE(0x0df6, 0x9071), .driver_info = DEVICE_ZD1211 },
@@ -61,6 +60,7 @@
{ USB_DEVICE(0x157e, 0x300a), .driver_info = DEVICE_ZD1211 },
{ USB_DEVICE(0x0105, 0x145f), .driver_info = DEVICE_ZD1211 },
/* ZD1211B */
+ { USB_DEVICE(0x054c, 0x0257), .driver_info = DEVICE_ZD1211B },
{ USB_DEVICE(0x0ace, 0x1215), .driver_info = DEVICE_ZD1211B },
{ USB_DEVICE(0x0ace, 0xb215), .driver_info = DEVICE_ZD1211B },
{ USB_DEVICE(0x157e, 0x300d), .driver_info = DEVICE_ZD1211B },
@@ -87,6 +87,7 @@
{ USB_DEVICE(0x0471, 0x1237), .driver_info = DEVICE_ZD1211B },
{ USB_DEVICE(0x07fa, 0x1196), .driver_info = DEVICE_ZD1211B },
{ USB_DEVICE(0x0df6, 0x0036), .driver_info = DEVICE_ZD1211B },
+ { USB_DEVICE(0x07b8, 0x6001), .driver_info = DEVICE_ZD1211B },
/* "Driverless" devices that need ejecting */
{ USB_DEVICE(0x0ace, 0x2011), .driver_info = DEVICE_INSTALLER },
{ USB_DEVICE(0x0ace, 0x20ff), .driver_info = DEVICE_INSTALLER },
diff --git a/drivers/net/yellowfin.c b/drivers/net/yellowfin.c
index 3c7a505..a075801 100644
--- a/drivers/net/yellowfin.c
+++ b/drivers/net/yellowfin.c
@@ -109,7 +109,7 @@
/* These identify the driver base version and may not be removed. */
static const char version[] __devinitconst =
KERN_INFO DRV_NAME ".c:v1.05 1/09/2001 Written by Donald Becker <becker@scyld.com>\n"
- KERN_INFO " (unofficial 2.4.x port, " DRV_VERSION ", " DRV_RELDATE ")\n";
+ " (unofficial 2.4.x port, " DRV_VERSION ", " DRV_RELDATE ")\n";
MODULE_AUTHOR("Donald Becker <becker@scyld.com>");
MODULE_DESCRIPTION("Packet Engines Yellowfin G-NIC Gigabit Ethernet driver");
@@ -700,12 +700,15 @@
int i;
printk(KERN_WARNING " Rx ring %p: ", yp->rx_ring);
for (i = 0; i < RX_RING_SIZE; i++)
- printk(" %8.8x", yp->rx_ring[i].result_status);
- printk("\n"KERN_WARNING" Tx ring %p: ", yp->tx_ring);
+ printk(KERN_CONT " %8.8x",
+ yp->rx_ring[i].result_status);
+ printk(KERN_CONT "\n");
+ printk(KERN_WARNING" Tx ring %p: ", yp->tx_ring);
for (i = 0; i < TX_RING_SIZE; i++)
- printk(" %4.4x /%8.8x", yp->tx_status[i].tx_errs,
- yp->tx_ring[i].result_status);
- printk("\n");
+ printk(KERN_CONT " %4.4x /%8.8x",
+ yp->tx_status[i].tx_errs,
+ yp->tx_ring[i].result_status);
+ printk(KERN_CONT "\n");
}
/* If the hardware is found to hang regularly, we will update the code
@@ -1216,20 +1219,20 @@
#if defined(__i386__)
if (yellowfin_debug > 2) {
- printk("\n"KERN_DEBUG" Tx ring at %8.8llx:\n",
+ printk(KERN_DEBUG" Tx ring at %8.8llx:\n",
(unsigned long long)yp->tx_ring_dma);
for (i = 0; i < TX_RING_SIZE*2; i++)
- printk(" %c #%d desc. %8.8x %8.8x %8.8x %8.8x.\n",
+ printk(KERN_DEBUG " %c #%d desc. %8.8x %8.8x %8.8x %8.8x.\n",
ioread32(ioaddr + TxPtr) == (long)&yp->tx_ring[i] ? '>' : ' ',
i, yp->tx_ring[i].dbdma_cmd, yp->tx_ring[i].addr,
yp->tx_ring[i].branch_addr, yp->tx_ring[i].result_status);
printk(KERN_DEBUG " Tx status %p:\n", yp->tx_status);
for (i = 0; i < TX_RING_SIZE; i++)
- printk(" #%d status %4.4x %4.4x %4.4x %4.4x.\n",
+ printk(KERN_DEBUG " #%d status %4.4x %4.4x %4.4x %4.4x.\n",
i, yp->tx_status[i].tx_cnt, yp->tx_status[i].tx_errs,
yp->tx_status[i].total_tx_cnt, yp->tx_status[i].paused);
- printk("\n"KERN_DEBUG " Rx ring %8.8llx:\n",
+ printk(KERN_DEBUG " Rx ring %8.8llx:\n",
(unsigned long long)yp->rx_ring_dma);
for (i = 0; i < RX_RING_SIZE; i++) {
printk(KERN_DEBUG " %c #%d desc. %8.8x %8.8x %8.8x\n",
diff --git a/drivers/oprofile/oprofile_stats.c b/drivers/oprofile/oprofile_stats.c
index e1f6ce0..3c2270a 100644
--- a/drivers/oprofile/oprofile_stats.c
+++ b/drivers/oprofile/oprofile_stats.c
@@ -33,6 +33,7 @@
atomic_set(&oprofile_stats.sample_lost_no_mm, 0);
atomic_set(&oprofile_stats.sample_lost_no_mapping, 0);
atomic_set(&oprofile_stats.event_lost_overflow, 0);
+ atomic_set(&oprofile_stats.bt_lost_no_mapping, 0);
}
diff --git a/drivers/parisc/ccio-dma.c b/drivers/parisc/ccio-dma.c
index 5d610cb..0f0e0b9 100644
--- a/drivers/parisc/ccio-dma.c
+++ b/drivers/parisc/ccio-dma.c
@@ -1134,7 +1134,7 @@
.llseek = seq_lseek,
.release = single_release,
};
-#endif
+#endif /* CONFIG_PROC_FS */
/**
* ccio_find_ioc - Find the ioc in the ioc_list
@@ -1568,14 +1568,15 @@
/* if this fails, no I/O cards will work, so may as well bug */
BUG_ON(dev->dev.platform_data == NULL);
HBA_DATA(dev->dev.platform_data)->iommu = ioc;
-
+
+#ifdef CONFIG_PROC_FS
if (ioc_count == 0) {
proc_create(MODULE_NAME, 0, proc_runway_root,
&ccio_proc_info_fops);
proc_create(MODULE_NAME"-bitmap", 0, proc_runway_root,
&ccio_proc_bitmap_fops);
}
-
+#endif
ioc_count++;
parisc_has_iommu();
diff --git a/drivers/parisc/dino.c b/drivers/parisc/dino.c
index 52ae0b1..c590974e 100644
--- a/drivers/parisc/dino.c
+++ b/drivers/parisc/dino.c
@@ -353,7 +353,7 @@
return 0;
}
-static struct hw_interrupt_type dino_interrupt_type = {
+static struct irq_chip dino_interrupt_type = {
.typename = "GSC-PCI",
.startup = dino_startup_irq,
.shutdown = dino_disable_irq,
@@ -1019,22 +1019,22 @@
** It's not used to avoid chicken/egg problems
** with configuration accessor functions.
*/
- bus = pci_scan_bus_parented(&dev->dev, dino_current_bus,
- &dino_cfg_ops, NULL);
+ dino_dev->hba.hba_bus = bus = pci_scan_bus_parented(&dev->dev,
+ dino_current_bus, &dino_cfg_ops, NULL);
+
if(bus) {
- pci_bus_add_devices(bus);
/* This code *depends* on scanning being single threaded
* if it isn't, this global bus number count will fail
*/
dino_current_bus = bus->subordinate + 1;
pci_bus_assign_resources(bus);
+ pci_bus_add_devices(bus);
} else {
- printk(KERN_ERR "ERROR: failed to scan PCI bus on %s (probably duplicate bus number %d)\n",
+ printk(KERN_ERR "ERROR: failed to scan PCI bus on %s (duplicate bus number %d?)\n",
dev_name(&dev->dev), dino_current_bus);
/* increment the bus number in case of duplicates */
dino_current_bus++;
}
- dino_dev->hba.hba_bus = bus;
return 0;
}
diff --git a/drivers/parisc/eisa.c b/drivers/parisc/eisa.c
index 5b89f40..5122074 100644
--- a/drivers/parisc/eisa.c
+++ b/drivers/parisc/eisa.c
@@ -188,7 +188,7 @@
return 0;
}
-static struct hw_interrupt_type eisa_interrupt_type = {
+static struct irq_chip eisa_interrupt_type = {
.typename = "EISA",
.startup = eisa_startup_irq,
.shutdown = eisa_disable_irq,
diff --git a/drivers/parisc/eisa_enumerator.c b/drivers/parisc/eisa_enumerator.c
index c709ecc..0be1d50 100644
--- a/drivers/parisc/eisa_enumerator.c
+++ b/drivers/parisc/eisa_enumerator.c
@@ -101,7 +101,7 @@
printk("memory %lx-%lx ", (unsigned long)res->start, (unsigned long)res->end);
result = request_resource(mem_parent, res);
if (result < 0) {
- printk("\n" KERN_ERR "EISA Enumerator: failed to claim EISA Bus address space!\n");
+ printk(KERN_ERR "EISA Enumerator: failed to claim EISA Bus address space!\n");
return result;
}
}
@@ -191,7 +191,7 @@
printk("ioports %lx-%lx ", (unsigned long)res->start, (unsigned long)res->end);
result = request_resource(io_parent, res);
if (result < 0) {
- printk("\n" KERN_ERR "EISA Enumerator: failed to claim EISA Bus address space!\n");
+ printk(KERN_ERR "EISA Enumerator: failed to claim EISA Bus address space!\n");
return result;
}
}
@@ -224,7 +224,7 @@
case HPEE_PORT_INIT_WIDTH_BYTE:
s=1;
if (c & HPEE_PORT_INIT_MASK) {
- printk("\n" KERN_WARNING "port_init: unverified mask attribute\n");
+ printk(KERN_WARNING "port_init: unverified mask attribute\n");
outb((inb(get_16(buf+len+1) &
get_8(buf+len+3)) |
get_8(buf+len+4)), get_16(buf+len+1));
@@ -249,7 +249,7 @@
case HPEE_PORT_INIT_WIDTH_DWORD:
s=4;
if (c & HPEE_PORT_INIT_MASK) {
- printk("\n" KERN_WARNING "port_init: unverified mask attribute\n");
+ printk(KERN_WARNING "port_init: unverified mask attribute\n");
outl((inl(get_16(buf+len+1) &
get_32(buf+len+3)) |
get_32(buf+len+7)), get_16(buf+len+1));
@@ -259,7 +259,7 @@
break;
default:
- printk("\n" KERN_ERR "Invalid port init word %02x\n", c);
+ printk(KERN_ERR "Invalid port init word %02x\n", c);
return 0;
}
@@ -297,7 +297,7 @@
/* just skip past the type field */
len = get_8(buf);
if (len > 80) {
- printk("\n" KERN_ERR "eisa_enumerator: type info field too long (%d, max is 80)\n", len);
+ printk(KERN_ERR "eisa_enumerator: type info field too long (%d, max is 80)\n", len);
}
return 1+len;
@@ -398,7 +398,7 @@
}
if (p0 + function_len < pos) {
- printk("\n" KERN_ERR "eisa_enumerator: function %d length mis-match "
+ printk(KERN_ERR "eisa_enumerator: function %d length mis-match "
"got %d, expected %d\n",
num_func, pos-p0, function_len);
res=-1;
diff --git a/drivers/parisc/gsc.c b/drivers/parisc/gsc.c
index d336329..647adc9 100644
--- a/drivers/parisc/gsc.c
+++ b/drivers/parisc/gsc.c
@@ -148,7 +148,7 @@
return 0;
}
-static struct hw_interrupt_type gsc_asic_interrupt_type = {
+static struct irq_chip gsc_asic_interrupt_type = {
.typename = "GSC-ASIC",
.startup = gsc_asic_startup_irq,
.shutdown = gsc_asic_disable_irq,
@@ -158,7 +158,7 @@
.end = no_end_irq,
};
-int gsc_assign_irq(struct hw_interrupt_type *type, void *data)
+int gsc_assign_irq(struct irq_chip *type, void *data)
{
static int irq = GSC_IRQ_BASE;
struct irq_desc *desc;
diff --git a/drivers/parisc/gsc.h b/drivers/parisc/gsc.h
index 762a1ba..b9d7bfb 100644
--- a/drivers/parisc/gsc.h
+++ b/drivers/parisc/gsc.h
@@ -38,7 +38,7 @@
int gsc_common_setup(struct parisc_device *parent, struct gsc_asic *gsc_asic);
int gsc_alloc_irq(struct gsc_irq *dev); /* dev needs an irq */
int gsc_claim_irq(struct gsc_irq *dev, int irq); /* dev needs this irq */
-int gsc_assign_irq(struct hw_interrupt_type *type, void *data);
+int gsc_assign_irq(struct irq_chip *type, void *data);
int gsc_find_local_irq(unsigned int irq, int *global_irq, int limit);
void gsc_fixup_irqs(struct parisc_device *parent, void *ctrl,
void (*choose)(struct parisc_device *child, void *ctrl));
diff --git a/drivers/parisc/iosapic.c b/drivers/parisc/iosapic.c
index 4a9cc92..88e3335 100644
--- a/drivers/parisc/iosapic.c
+++ b/drivers/parisc/iosapic.c
@@ -729,7 +729,7 @@
}
#endif
-static struct hw_interrupt_type iosapic_interrupt_type = {
+static struct irq_chip iosapic_interrupt_type = {
.typename = "IO-SAPIC-level",
.startup = iosapic_startup_irq,
.shutdown = iosapic_disable_irq,
diff --git a/drivers/parisc/lba_pci.c b/drivers/parisc/lba_pci.c
index 59fbbf1..ede6146 100644
--- a/drivers/parisc/lba_pci.c
+++ b/drivers/parisc/lba_pci.c
@@ -980,28 +980,38 @@
lba_pat_resources(struct parisc_device *pa_dev, struct lba_device *lba_dev)
{
unsigned long bytecnt;
- pdc_pat_cell_mod_maddr_block_t pa_pdc_cell; /* PA_VIEW */
- pdc_pat_cell_mod_maddr_block_t io_pdc_cell; /* IO_VIEW */
long io_count;
long status; /* PDC return status */
long pa_count;
+ pdc_pat_cell_mod_maddr_block_t *pa_pdc_cell; /* PA_VIEW */
+ pdc_pat_cell_mod_maddr_block_t *io_pdc_cell; /* IO_VIEW */
int i;
+ pa_pdc_cell = kzalloc(sizeof(pdc_pat_cell_mod_maddr_block_t), GFP_KERNEL);
+ if (!pa_pdc_cell)
+ return;
+
+ io_pdc_cell = kzalloc(sizeof(pdc_pat_cell_mod_maddr_block_t), GFP_KERNEL);
+ if (!pa_pdc_cell) {
+ kfree(pa_pdc_cell);
+ return;
+ }
+
/* return cell module (IO view) */
status = pdc_pat_cell_module(&bytecnt, pa_dev->pcell_loc, pa_dev->mod_index,
- PA_VIEW, & pa_pdc_cell);
- pa_count = pa_pdc_cell.mod[1];
+ PA_VIEW, pa_pdc_cell);
+ pa_count = pa_pdc_cell->mod[1];
status |= pdc_pat_cell_module(&bytecnt, pa_dev->pcell_loc, pa_dev->mod_index,
- IO_VIEW, &io_pdc_cell);
- io_count = io_pdc_cell.mod[1];
+ IO_VIEW, io_pdc_cell);
+ io_count = io_pdc_cell->mod[1];
/* We've already done this once for device discovery...*/
if (status != PDC_OK) {
panic("pdc_pat_cell_module() call failed for LBA!\n");
}
- if (PAT_GET_ENTITY(pa_pdc_cell.mod_info) != PAT_ENTITY_LBA) {
+ if (PAT_GET_ENTITY(pa_pdc_cell->mod_info) != PAT_ENTITY_LBA) {
panic("pdc_pat_cell_module() entity returned != PAT_ENTITY_LBA!\n");
}
@@ -1016,8 +1026,8 @@
} *p, *io;
struct resource *r;
- p = (void *) &(pa_pdc_cell.mod[2+i*3]);
- io = (void *) &(io_pdc_cell.mod[2+i*3]);
+ p = (void *) &(pa_pdc_cell->mod[2+i*3]);
+ io = (void *) &(io_pdc_cell->mod[2+i*3]);
/* Convert the PAT range data to PCI "struct resource" */
switch(p->type & 0xff) {
@@ -1096,6 +1106,9 @@
break;
}
}
+
+ kfree(pa_pdc_cell);
+ kfree(io_pdc_cell);
}
#else
/* keep compiler from complaining about missing declarations */
@@ -1509,10 +1522,6 @@
lba_bus = lba_dev->hba.hba_bus =
pci_scan_bus_parented(&dev->dev, lba_dev->hba.bus_num.start,
cfg_ops, NULL);
- if (lba_bus) {
- lba_next_bus = lba_bus->subordinate + 1;
- pci_bus_add_devices(lba_bus);
- }
/* This is in lieu of calling pci_assign_unassigned_resources() */
if (is_pdc_pat()) {
@@ -1533,7 +1542,6 @@
}
pci_enable_bridges(lba_bus);
-
/*
** Once PCI register ops has walked the bus, access to config
** space is restricted. Avoids master aborts on config cycles.
@@ -1543,6 +1551,11 @@
lba_dev->flags |= LBA_FLAG_SKIP_PROBE;
}
+ if (lba_bus) {
+ lba_next_bus = lba_bus->subordinate + 1;
+ pci_bus_add_devices(lba_bus);
+ }
+
/* Whew! Finally done! Tell services we got this one covered. */
return 0;
}
diff --git a/drivers/parisc/sba_iommu.c b/drivers/parisc/sba_iommu.c
index d46dd57..123d8fe 100644
--- a/drivers/parisc/sba_iommu.c
+++ b/drivers/parisc/sba_iommu.c
@@ -2057,6 +2057,7 @@
r->start = (base & ~1UL) | PCI_F_EXTEND;
size = ~ READ_REG32(reg + LMMIO_DIRECT0_MASK);
r->end = r->start + size;
+ r->flags = IORESOURCE_MEM;
}
}
@@ -2093,4 +2094,5 @@
size = (~READ_REG32(sba->sba_hpa + LMMIO_DIST_MASK)) / ROPES_PER_IOC;
r->start += rope * (size + 1); /* adjust base for this rope */
r->end = r->start + size;
+ r->flags = IORESOURCE_MEM;
}
diff --git a/drivers/parisc/superio.c b/drivers/parisc/superio.c
index 33e5ade..675f04e 100644
--- a/drivers/parisc/superio.c
+++ b/drivers/parisc/superio.c
@@ -325,7 +325,7 @@
return 0;
}
-static struct hw_interrupt_type superio_interrupt_type = {
+static struct irq_chip superio_interrupt_type = {
.typename = SUPERIO,
.startup = superio_startup_irq,
.shutdown = superio_disable_irq,
@@ -434,8 +434,8 @@
0 /*base_hi*/,
PAR_IRQ,
PARPORT_DMA_NONE /* dma */,
- NULL /*struct pci_dev* */),
- 0 /* shared irq flags */ )
+ NULL /*struct pci_dev* */,
+ 0 /* shared irq flags */))
printk(KERN_WARNING PFX "Probing parallel port failed.\n");
#endif /* CONFIG_PARPORT_PC */
diff --git a/drivers/parport/parport_pc.c b/drivers/parport/parport_pc.c
index 1032d5f..2597145 100644
--- a/drivers/parport/parport_pc.c
+++ b/drivers/parport/parport_pc.c
@@ -2907,6 +2907,7 @@
netmos_9755,
netmos_9805,
netmos_9815,
+ netmos_9901,
quatech_sppxp100,
};
@@ -2987,7 +2988,7 @@
/* netmos_9755 */ { 2, { { 0, 1 }, { 2, 3 },} },
/* netmos_9805 */ { 1, { { 0, -1 }, } },
/* netmos_9815 */ { 2, { { 0, -1 }, { 2, -1 }, } },
-
+ /* netmos_9901 */ { 1, { { 0, -1 }, } },
/* quatech_sppxp100 */ { 1, { { 0, 1 }, } },
};
@@ -3089,6 +3090,8 @@
PCI_ANY_ID, PCI_ANY_ID, 0, 0, netmos_9805 },
{ PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9815,
PCI_ANY_ID, PCI_ANY_ID, 0, 0, netmos_9815 },
+ { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9901,
+ 0xA000, 0x2000, 0, 0, netmos_9901 },
/* Quatech SPPXP-100 Parallel port PCI ExpressCard */
{ PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_SPPXP_100,
PCI_ANY_ID, PCI_ANY_ID, 0, 0, quatech_sppxp100 },
diff --git a/drivers/pci/hotplug/cpci_hotplug_core.c b/drivers/pci/hotplug/cpci_hotplug_core.c
index a5b9f6a..d703e73 100644
--- a/drivers/pci/hotplug/cpci_hotplug_core.c
+++ b/drivers/pci/hotplug/cpci_hotplug_core.c
@@ -32,7 +32,6 @@
#include <linux/pci_hotplug.h>
#include <linux/init.h>
#include <linux/interrupt.h>
-#include <linux/smp_lock.h>
#include <asm/atomic.h>
#include <linux/delay.h>
#include <linux/kthread.h>
diff --git a/drivers/pci/hotplug/cpqphp_ctrl.c b/drivers/pci/hotplug/cpqphp_ctrl.c
index 2fa47af..0ff689a 100644
--- a/drivers/pci/hotplug/cpqphp_ctrl.c
+++ b/drivers/pci/hotplug/cpqphp_ctrl.c
@@ -34,7 +34,6 @@
#include <linux/interrupt.h>
#include <linux/delay.h>
#include <linux/wait.h>
-#include <linux/smp_lock.h>
#include <linux/pci.h>
#include <linux/pci_hotplug.h>
#include <linux/kthread.h>
diff --git a/drivers/pci/hotplug/cpqphp_sysfs.c b/drivers/pci/hotplug/cpqphp_sysfs.c
index 8450f4a..e6089bd 100644
--- a/drivers/pci/hotplug/cpqphp_sysfs.c
+++ b/drivers/pci/hotplug/cpqphp_sysfs.c
@@ -33,6 +33,7 @@
#include <linux/workqueue.h>
#include <linux/pci.h>
#include <linux/pci_hotplug.h>
+#include <linux/smp_lock.h>
#include <linux/debugfs.h>
#include "cpqphp.h"
diff --git a/drivers/pci/hotplug/pci_hotplug_core.c b/drivers/pci/hotplug/pci_hotplug_core.c
index 8445804..5c5043f 100644
--- a/drivers/pci/hotplug/pci_hotplug_core.c
+++ b/drivers/pci/hotplug/pci_hotplug_core.c
@@ -555,6 +555,8 @@
* @slot: pointer to the &struct hotplug_slot to register
* @devnr: device number
* @name: name registered with kobject core
+ * @owner: caller module owner
+ * @mod_name: caller module name
*
* Registers a hotplug slot with the pci hotplug subsystem, which will allow
* userspace interaction to the slot.
diff --git a/drivers/pci/hotplug/pciehp_ctrl.c b/drivers/pci/hotplug/pciehp_ctrl.c
index ff40345..8aab8ed 100644
--- a/drivers/pci/hotplug/pciehp_ctrl.c
+++ b/drivers/pci/hotplug/pciehp_ctrl.c
@@ -30,7 +30,6 @@
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/types.h>
-#include <linux/smp_lock.h>
#include <linux/pci.h>
#include <linux/workqueue.h>
#include "../pci.h"
diff --git a/drivers/pci/intel-iommu.c b/drivers/pci/intel-iommu.c
index e53eacd..ebc9b8d 100644
--- a/drivers/pci/intel-iommu.c
+++ b/drivers/pci/intel-iommu.c
@@ -39,7 +39,6 @@
#include <linux/sysdev.h>
#include <asm/cacheflush.h>
#include <asm/iommu.h>
-#include <asm/e820.h>
#include "pci.h"
#define ROOT_SIZE VTD_PAGE_SIZE
@@ -57,14 +56,32 @@
#define MAX_AGAW_WIDTH 64
#define DOMAIN_MAX_ADDR(gaw) ((((u64)1) << gaw) - 1)
+#define DOMAIN_MAX_PFN(gaw) ((((u64)1) << (gaw-VTD_PAGE_SHIFT)) - 1)
#define IOVA_PFN(addr) ((addr) >> PAGE_SHIFT)
#define DMA_32BIT_PFN IOVA_PFN(DMA_BIT_MASK(32))
#define DMA_64BIT_PFN IOVA_PFN(DMA_BIT_MASK(64))
-#ifndef PHYSICAL_PAGE_MASK
-#define PHYSICAL_PAGE_MASK PAGE_MASK
-#endif
+
+/* VT-d pages must always be _smaller_ than MM pages. Otherwise things
+ are never going to work. */
+static inline unsigned long dma_to_mm_pfn(unsigned long dma_pfn)
+{
+ return dma_pfn >> (PAGE_SHIFT - VTD_PAGE_SHIFT);
+}
+
+static inline unsigned long mm_to_dma_pfn(unsigned long mm_pfn)
+{
+ return mm_pfn << (PAGE_SHIFT - VTD_PAGE_SHIFT);
+}
+static inline unsigned long page_to_dma_pfn(struct page *pg)
+{
+ return mm_to_dma_pfn(page_to_pfn(pg));
+}
+static inline unsigned long virt_to_dma_pfn(void *p)
+{
+ return page_to_dma_pfn(virt_to_page(p));
+}
/* global iommu list, set NULL for ignored DMAR units */
static struct intel_iommu **g_iommus;
@@ -205,12 +222,17 @@
static inline u64 dma_pte_addr(struct dma_pte *pte)
{
- return (pte->val & VTD_PAGE_MASK);
+#ifdef CONFIG_64BIT
+ return pte->val & VTD_PAGE_MASK;
+#else
+ /* Must have a full atomic 64-bit read */
+ return __cmpxchg64(pte, 0ULL, 0ULL) & VTD_PAGE_MASK;
+#endif
}
-static inline void dma_set_pte_addr(struct dma_pte *pte, u64 addr)
+static inline void dma_set_pte_pfn(struct dma_pte *pte, unsigned long pfn)
{
- pte->val |= (addr & VTD_PAGE_MASK);
+ pte->val |= (uint64_t)pfn << VTD_PAGE_SHIFT;
}
static inline bool dma_pte_present(struct dma_pte *pte)
@@ -218,6 +240,11 @@
return (pte->val & 3) != 0;
}
+static inline int first_pte_in_page(struct dma_pte *pte)
+{
+ return !((unsigned long)pte & ~VTD_PAGE_MASK);
+}
+
/*
* This domain is a statically identity mapping domain.
* 1. This domain creats a static 1:1 mapping to all usable memory.
@@ -245,7 +272,6 @@
struct iova_domain iovad; /* iova's that belong to this domain */
struct dma_pte *pgd; /* virtual address */
- spinlock_t mapping_lock; /* page table lock */
int gaw; /* max guest address width */
/* adjusted guest address width, 0 is level 2 30-bit */
@@ -649,80 +675,78 @@
static inline unsigned int level_to_offset_bits(int level)
{
- return (12 + (level - 1) * LEVEL_STRIDE);
+ return (level - 1) * LEVEL_STRIDE;
}
-static inline int address_level_offset(u64 addr, int level)
+static inline int pfn_level_offset(unsigned long pfn, int level)
{
- return ((addr >> level_to_offset_bits(level)) & LEVEL_MASK);
+ return (pfn >> level_to_offset_bits(level)) & LEVEL_MASK;
}
-static inline u64 level_mask(int level)
+static inline unsigned long level_mask(int level)
{
- return ((u64)-1 << level_to_offset_bits(level));
+ return -1UL << level_to_offset_bits(level);
}
-static inline u64 level_size(int level)
+static inline unsigned long level_size(int level)
{
- return ((u64)1 << level_to_offset_bits(level));
+ return 1UL << level_to_offset_bits(level);
}
-static inline u64 align_to_level(u64 addr, int level)
+static inline unsigned long align_to_level(unsigned long pfn, int level)
{
- return ((addr + level_size(level) - 1) & level_mask(level));
+ return (pfn + level_size(level) - 1) & level_mask(level);
}
-static struct dma_pte * addr_to_dma_pte(struct dmar_domain *domain, u64 addr)
+static struct dma_pte *pfn_to_dma_pte(struct dmar_domain *domain,
+ unsigned long pfn)
{
- int addr_width = agaw_to_width(domain->agaw);
+ int addr_width = agaw_to_width(domain->agaw) - VTD_PAGE_SHIFT;
struct dma_pte *parent, *pte = NULL;
int level = agaw_to_level(domain->agaw);
int offset;
- unsigned long flags;
BUG_ON(!domain->pgd);
-
- addr &= (((u64)1) << addr_width) - 1;
+ BUG_ON(addr_width < BITS_PER_LONG && pfn >> addr_width);
parent = domain->pgd;
- spin_lock_irqsave(&domain->mapping_lock, flags);
while (level > 0) {
void *tmp_page;
- offset = address_level_offset(addr, level);
+ offset = pfn_level_offset(pfn, level);
pte = &parent[offset];
if (level == 1)
break;
if (!dma_pte_present(pte)) {
+ uint64_t pteval;
+
tmp_page = alloc_pgtable_page();
- if (!tmp_page) {
- spin_unlock_irqrestore(&domain->mapping_lock,
- flags);
+ if (!tmp_page)
return NULL;
+
+ domain_flush_cache(domain, tmp_page, VTD_PAGE_SIZE);
+ pteval = (virt_to_dma_pfn(tmp_page) << VTD_PAGE_SHIFT) | DMA_PTE_READ | DMA_PTE_WRITE;
+ if (cmpxchg64(&pte->val, 0ULL, pteval)) {
+ /* Someone else set it while we were thinking; use theirs. */
+ free_pgtable_page(tmp_page);
+ } else {
+ dma_pte_addr(pte);
+ domain_flush_cache(domain, pte, sizeof(*pte));
}
- domain_flush_cache(domain, tmp_page, PAGE_SIZE);
- dma_set_pte_addr(pte, virt_to_phys(tmp_page));
- /*
- * high level table always sets r/w, last level page
- * table control read/write
- */
- dma_set_pte_readable(pte);
- dma_set_pte_writable(pte);
- domain_flush_cache(domain, pte, sizeof(*pte));
}
parent = phys_to_virt(dma_pte_addr(pte));
level--;
}
- spin_unlock_irqrestore(&domain->mapping_lock, flags);
return pte;
}
/* return address's pte at specific level */
-static struct dma_pte *dma_addr_level_pte(struct dmar_domain *domain, u64 addr,
- int level)
+static struct dma_pte *dma_pfn_level_pte(struct dmar_domain *domain,
+ unsigned long pfn,
+ int level)
{
struct dma_pte *parent, *pte = NULL;
int total = agaw_to_level(domain->agaw);
@@ -730,7 +754,7 @@
parent = domain->pgd;
while (level <= total) {
- offset = address_level_offset(addr, total);
+ offset = pfn_level_offset(pfn, total);
pte = &parent[offset];
if (level == total)
return pte;
@@ -743,74 +767,82 @@
return NULL;
}
-/* clear one page's page table */
-static void dma_pte_clear_one(struct dmar_domain *domain, u64 addr)
-{
- struct dma_pte *pte = NULL;
-
- /* get last level pte */
- pte = dma_addr_level_pte(domain, addr, 1);
-
- if (pte) {
- dma_clear_pte(pte);
- domain_flush_cache(domain, pte, sizeof(*pte));
- }
-}
-
/* clear last level pte, a tlb flush should be followed */
-static void dma_pte_clear_range(struct dmar_domain *domain, u64 start, u64 end)
+static void dma_pte_clear_range(struct dmar_domain *domain,
+ unsigned long start_pfn,
+ unsigned long last_pfn)
{
- int addr_width = agaw_to_width(domain->agaw);
- int npages;
+ int addr_width = agaw_to_width(domain->agaw) - VTD_PAGE_SHIFT;
+ struct dma_pte *first_pte, *pte;
- start &= (((u64)1) << addr_width) - 1;
- end &= (((u64)1) << addr_width) - 1;
- /* in case it's partial page */
- start &= PAGE_MASK;
- end = PAGE_ALIGN(end);
- npages = (end - start) / VTD_PAGE_SIZE;
+ BUG_ON(addr_width < BITS_PER_LONG && start_pfn >> addr_width);
+ BUG_ON(addr_width < BITS_PER_LONG && last_pfn >> addr_width);
- /* we don't need lock here, nobody else touches the iova range */
- while (npages--) {
- dma_pte_clear_one(domain, start);
- start += VTD_PAGE_SIZE;
+ /* we don't need lock here; nobody else touches the iova range */
+ while (start_pfn <= last_pfn) {
+ first_pte = pte = dma_pfn_level_pte(domain, start_pfn, 1);
+ if (!pte) {
+ start_pfn = align_to_level(start_pfn + 1, 2);
+ continue;
+ }
+ do {
+ dma_clear_pte(pte);
+ start_pfn++;
+ pte++;
+ } while (start_pfn <= last_pfn && !first_pte_in_page(pte));
+
+ domain_flush_cache(domain, first_pte,
+ (void *)pte - (void *)first_pte);
}
}
/* free page table pages. last level pte should already be cleared */
static void dma_pte_free_pagetable(struct dmar_domain *domain,
- u64 start, u64 end)
+ unsigned long start_pfn,
+ unsigned long last_pfn)
{
- int addr_width = agaw_to_width(domain->agaw);
- struct dma_pte *pte;
+ int addr_width = agaw_to_width(domain->agaw) - VTD_PAGE_SHIFT;
+ struct dma_pte *first_pte, *pte;
int total = agaw_to_level(domain->agaw);
int level;
- u64 tmp;
+ unsigned long tmp;
- start &= (((u64)1) << addr_width) - 1;
- end &= (((u64)1) << addr_width) - 1;
+ BUG_ON(addr_width < BITS_PER_LONG && start_pfn >> addr_width);
+ BUG_ON(addr_width < BITS_PER_LONG && last_pfn >> addr_width);
- /* we don't need lock here, nobody else touches the iova range */
+ /* We don't need lock here; nobody else touches the iova range */
level = 2;
while (level <= total) {
- tmp = align_to_level(start, level);
- if (tmp >= end || (tmp + level_size(level) > end))
+ tmp = align_to_level(start_pfn, level);
+
+ /* If we can't even clear one PTE at this level, we're done */
+ if (tmp + level_size(level) - 1 > last_pfn)
return;
- while (tmp < end) {
- pte = dma_addr_level_pte(domain, tmp, level);
- if (pte) {
- free_pgtable_page(
- phys_to_virt(dma_pte_addr(pte)));
- dma_clear_pte(pte);
- domain_flush_cache(domain, pte, sizeof(*pte));
+ while (tmp + level_size(level) - 1 <= last_pfn) {
+ first_pte = pte = dma_pfn_level_pte(domain, tmp, level);
+ if (!pte) {
+ tmp = align_to_level(tmp + 1, level + 1);
+ continue;
}
- tmp += level_size(level);
+ do {
+ if (dma_pte_present(pte)) {
+ free_pgtable_page(phys_to_virt(dma_pte_addr(pte)));
+ dma_clear_pte(pte);
+ }
+ pte++;
+ tmp += level_size(level);
+ } while (!first_pte_in_page(pte) &&
+ tmp + level_size(level) - 1 <= last_pfn);
+
+ domain_flush_cache(domain, first_pte,
+ (void *)pte - (void *)first_pte);
+
}
level++;
}
/* free pgd */
- if (start == 0 && end >= ((((u64)1) << addr_width) - 1)) {
+ if (start_pfn == 0 && last_pfn == DOMAIN_MAX_PFN(domain->gaw)) {
free_pgtable_page(domain->pgd);
domain->pgd = NULL;
}
@@ -1036,11 +1068,11 @@
}
static void iommu_flush_iotlb_psi(struct intel_iommu *iommu, u16 did,
- u64 addr, unsigned int pages)
+ unsigned long pfn, unsigned int pages)
{
unsigned int mask = ilog2(__roundup_pow_of_two(pages));
+ uint64_t addr = (uint64_t)pfn << VTD_PAGE_SHIFT;
- BUG_ON(addr & (~VTD_PAGE_MASK));
BUG_ON(pages == 0);
/*
@@ -1055,7 +1087,12 @@
else
iommu->flush.flush_iotlb(iommu, did, addr, mask,
DMA_TLB_PSI_FLUSH);
- if (did)
+
+ /*
+ * In caching mode, domain ID 0 is reserved for non-present to present
+ * mapping flush. Device IOTLB doesn't need to be flushed in this case.
+ */
+ if (!cap_caching_mode(iommu->cap) || did)
iommu_flush_dev_iotlb(iommu->domains[did], addr, mask);
}
@@ -1280,7 +1317,6 @@
struct pci_dev *pdev = NULL;
struct iova *iova;
int i;
- u64 addr, size;
init_iova_domain(&reserved_iova_list, DMA_32BIT_PFN);
@@ -1303,12 +1339,9 @@
r = &pdev->resource[i];
if (!r->flags || !(r->flags & IORESOURCE_MEM))
continue;
- addr = r->start;
- addr &= PHYSICAL_PAGE_MASK;
- size = r->end - addr;
- size = PAGE_ALIGN(size);
- iova = reserve_iova(&reserved_iova_list, IOVA_PFN(addr),
- IOVA_PFN(size + addr) - 1);
+ iova = reserve_iova(&reserved_iova_list,
+ IOVA_PFN(r->start),
+ IOVA_PFN(r->end));
if (!iova)
printk(KERN_ERR "Reserve iova failed\n");
}
@@ -1342,7 +1375,6 @@
unsigned long sagaw;
init_iova_domain(&domain->iovad, DMA_32BIT_PFN);
- spin_lock_init(&domain->mapping_lock);
spin_lock_init(&domain->iommu_lock);
domain_reserve_special_ranges(domain);
@@ -1389,7 +1421,6 @@
{
struct dmar_drhd_unit *drhd;
struct intel_iommu *iommu;
- u64 end;
/* Domain 0 is reserved, so dont process it */
if (!domain)
@@ -1398,14 +1429,12 @@
domain_remove_dev_info(domain);
/* destroy iovas */
put_iova_domain(&domain->iovad);
- end = DOMAIN_MAX_ADDR(domain->gaw);
- end = end & (~PAGE_MASK);
/* clear ptes */
- dma_pte_clear_range(domain, 0, end);
+ dma_pte_clear_range(domain, 0, DOMAIN_MAX_PFN(domain->gaw));
/* free page tables */
- dma_pte_free_pagetable(domain, 0, end);
+ dma_pte_free_pagetable(domain, 0, DOMAIN_MAX_PFN(domain->gaw));
for_each_active_iommu(iommu, drhd)
if (test_bit(iommu->seq_id, &domain->iommu_bmp))
@@ -1619,42 +1648,86 @@
tmp->devfn);
}
-static int
-domain_page_mapping(struct dmar_domain *domain, dma_addr_t iova,
- u64 hpa, size_t size, int prot)
+static int __domain_mapping(struct dmar_domain *domain, unsigned long iov_pfn,
+ struct scatterlist *sg, unsigned long phys_pfn,
+ unsigned long nr_pages, int prot)
{
- u64 start_pfn, end_pfn;
- struct dma_pte *pte;
- int index;
- int addr_width = agaw_to_width(domain->agaw);
+ struct dma_pte *first_pte = NULL, *pte = NULL;
+ phys_addr_t uninitialized_var(pteval);
+ int addr_width = agaw_to_width(domain->agaw) - VTD_PAGE_SHIFT;
+ unsigned long sg_res;
- hpa &= (((u64)1) << addr_width) - 1;
+ BUG_ON(addr_width < BITS_PER_LONG && (iov_pfn + nr_pages - 1) >> addr_width);
if ((prot & (DMA_PTE_READ|DMA_PTE_WRITE)) == 0)
return -EINVAL;
- iova &= PAGE_MASK;
- start_pfn = ((u64)hpa) >> VTD_PAGE_SHIFT;
- end_pfn = (VTD_PAGE_ALIGN(((u64)hpa) + size)) >> VTD_PAGE_SHIFT;
- index = 0;
- while (start_pfn < end_pfn) {
- pte = addr_to_dma_pte(domain, iova + VTD_PAGE_SIZE * index);
- if (!pte)
- return -ENOMEM;
+
+ prot &= DMA_PTE_READ | DMA_PTE_WRITE | DMA_PTE_SNP;
+
+ if (sg)
+ sg_res = 0;
+ else {
+ sg_res = nr_pages + 1;
+ pteval = ((phys_addr_t)phys_pfn << VTD_PAGE_SHIFT) | prot;
+ }
+
+ while (nr_pages--) {
+ uint64_t tmp;
+
+ if (!sg_res) {
+ sg_res = (sg->offset + sg->length + VTD_PAGE_SIZE - 1) >> VTD_PAGE_SHIFT;
+ sg->dma_address = ((dma_addr_t)iov_pfn << VTD_PAGE_SHIFT) + sg->offset;
+ sg->dma_length = sg->length;
+ pteval = page_to_phys(sg_page(sg)) | prot;
+ }
+ if (!pte) {
+ first_pte = pte = pfn_to_dma_pte(domain, iov_pfn);
+ if (!pte)
+ return -ENOMEM;
+ }
/* We don't need lock here, nobody else
* touches the iova range
*/
- BUG_ON(dma_pte_addr(pte));
- dma_set_pte_addr(pte, start_pfn << VTD_PAGE_SHIFT);
- dma_set_pte_prot(pte, prot);
- if (prot & DMA_PTE_SNP)
- dma_set_pte_snp(pte);
- domain_flush_cache(domain, pte, sizeof(*pte));
- start_pfn++;
- index++;
+ tmp = cmpxchg64_local(&pte->val, 0ULL, pteval);
+ if (tmp) {
+ static int dumps = 5;
+ printk(KERN_CRIT "ERROR: DMA PTE for vPFN 0x%lx already set (to %llx not %llx)\n",
+ iov_pfn, tmp, (unsigned long long)pteval);
+ if (dumps) {
+ dumps--;
+ debug_dma_dump_mappings(NULL);
+ }
+ WARN_ON(1);
+ }
+ pte++;
+ if (!nr_pages || first_pte_in_page(pte)) {
+ domain_flush_cache(domain, first_pte,
+ (void *)pte - (void *)first_pte);
+ pte = NULL;
+ }
+ iov_pfn++;
+ pteval += VTD_PAGE_SIZE;
+ sg_res--;
+ if (!sg_res)
+ sg = sg_next(sg);
}
return 0;
}
+static inline int domain_sg_mapping(struct dmar_domain *domain, unsigned long iov_pfn,
+ struct scatterlist *sg, unsigned long nr_pages,
+ int prot)
+{
+ return __domain_mapping(domain, iov_pfn, sg, 0, nr_pages, prot);
+}
+
+static inline int domain_pfn_mapping(struct dmar_domain *domain, unsigned long iov_pfn,
+ unsigned long phys_pfn, unsigned long nr_pages,
+ int prot)
+{
+ return __domain_mapping(domain, iov_pfn, NULL, phys_pfn, nr_pages, prot);
+}
+
static void iommu_detach_dev(struct intel_iommu *iommu, u8 bus, u8 devfn)
{
if (!iommu)
@@ -1845,58 +1918,61 @@
static int iommu_identity_mapping;
+static int iommu_domain_identity_map(struct dmar_domain *domain,
+ unsigned long long start,
+ unsigned long long end)
+{
+ unsigned long first_vpfn = start >> VTD_PAGE_SHIFT;
+ unsigned long last_vpfn = end >> VTD_PAGE_SHIFT;
+
+ if (!reserve_iova(&domain->iovad, dma_to_mm_pfn(first_vpfn),
+ dma_to_mm_pfn(last_vpfn))) {
+ printk(KERN_ERR "IOMMU: reserve iova failed\n");
+ return -ENOMEM;
+ }
+
+ pr_debug("Mapping reserved region %llx-%llx for domain %d\n",
+ start, end, domain->id);
+ /*
+ * RMRR range might have overlap with physical memory range,
+ * clear it first
+ */
+ dma_pte_clear_range(domain, first_vpfn, last_vpfn);
+
+ return domain_pfn_mapping(domain, first_vpfn, first_vpfn,
+ last_vpfn - first_vpfn + 1,
+ DMA_PTE_READ|DMA_PTE_WRITE);
+}
+
static int iommu_prepare_identity_map(struct pci_dev *pdev,
unsigned long long start,
unsigned long long end)
{
struct dmar_domain *domain;
- unsigned long size;
- unsigned long long base;
int ret;
printk(KERN_INFO
- "IOMMU: Setting identity map for device %s [0x%Lx - 0x%Lx]\n",
- pci_name(pdev), start, end);
- if (iommu_identity_mapping)
- domain = si_domain;
- else
- /* page table init */
- domain = get_domain_for_dev(pdev, DEFAULT_DOMAIN_ADDRESS_WIDTH);
+ "IOMMU: Setting identity map for device %s [0x%Lx - 0x%Lx]\n",
+ pci_name(pdev), start, end);
+
+ domain = get_domain_for_dev(pdev, DEFAULT_DOMAIN_ADDRESS_WIDTH);
if (!domain)
return -ENOMEM;
- /* The address might not be aligned */
- base = start & PAGE_MASK;
- size = end - base;
- size = PAGE_ALIGN(size);
- if (!reserve_iova(&domain->iovad, IOVA_PFN(base),
- IOVA_PFN(base + size) - 1)) {
- printk(KERN_ERR "IOMMU: reserve iova failed\n");
- ret = -ENOMEM;
- goto error;
- }
-
- pr_debug("Mapping reserved region %lx@%llx for %s\n",
- size, base, pci_name(pdev));
- /*
- * RMRR range might have overlap with physical memory range,
- * clear it first
- */
- dma_pte_clear_range(domain, base, base + size);
-
- ret = domain_page_mapping(domain, base, base, size,
- DMA_PTE_READ|DMA_PTE_WRITE);
+ ret = iommu_domain_identity_map(domain, start, end);
if (ret)
goto error;
/* context entry init */
ret = domain_context_mapping(domain, pdev, CONTEXT_TT_MULTI_LEVEL);
- if (!ret)
- return 0;
-error:
+ if (ret)
+ goto error;
+
+ return 0;
+
+ error:
domain_exit(domain);
return ret;
-
}
static inline int iommu_prepare_rmrr_dev(struct dmar_rmrr_unit *rmrr,
@@ -1908,64 +1984,6 @@
rmrr->end_address + 1);
}
-#ifdef CONFIG_DMAR_GFX_WA
-struct iommu_prepare_data {
- struct pci_dev *pdev;
- int ret;
-};
-
-static int __init iommu_prepare_work_fn(unsigned long start_pfn,
- unsigned long end_pfn, void *datax)
-{
- struct iommu_prepare_data *data;
-
- data = (struct iommu_prepare_data *)datax;
-
- data->ret = iommu_prepare_identity_map(data->pdev,
- start_pfn<<PAGE_SHIFT, end_pfn<<PAGE_SHIFT);
- return data->ret;
-
-}
-
-static int __init iommu_prepare_with_active_regions(struct pci_dev *pdev)
-{
- int nid;
- struct iommu_prepare_data data;
-
- data.pdev = pdev;
- data.ret = 0;
-
- for_each_online_node(nid) {
- work_with_active_regions(nid, iommu_prepare_work_fn, &data);
- if (data.ret)
- return data.ret;
- }
- return data.ret;
-}
-
-static void __init iommu_prepare_gfx_mapping(void)
-{
- struct pci_dev *pdev = NULL;
- int ret;
-
- for_each_pci_dev(pdev) {
- if (pdev->dev.archdata.iommu == DUMMY_DEVICE_DOMAIN_INFO ||
- !IS_GFX_DEVICE(pdev))
- continue;
- printk(KERN_INFO "IOMMU: gfx device %s 1-1 mapping\n",
- pci_name(pdev));
- ret = iommu_prepare_with_active_regions(pdev);
- if (ret)
- printk(KERN_ERR "IOMMU: mapping reserved region failed\n");
- }
-}
-#else /* !CONFIG_DMAR_GFX_WA */
-static inline void iommu_prepare_gfx_mapping(void)
-{
- return;
-}
-#endif
-
#ifdef CONFIG_DMAR_FLOPPY_WA
static inline void iommu_prepare_isa(void)
{
@@ -1976,12 +1994,12 @@
if (!pdev)
return;
- printk(KERN_INFO "IOMMU: Prepare 0-16M unity mapping for LPC\n");
+ printk(KERN_INFO "IOMMU: Prepare 0-16MiB unity mapping for LPC\n");
ret = iommu_prepare_identity_map(pdev, 0, 16*1024*1024);
if (ret)
- printk(KERN_ERR "IOMMU: Failed to create 0-64M identity map, "
- "floppy might not work\n");
+ printk(KERN_ERR "IOMMU: Failed to create 0-16MiB identity map; "
+ "floppy might not work\n");
}
#else
@@ -2009,16 +2027,30 @@
}
static int md_domain_init(struct dmar_domain *domain, int guest_width);
+
+static int __init si_domain_work_fn(unsigned long start_pfn,
+ unsigned long end_pfn, void *datax)
+{
+ int *ret = datax;
+
+ *ret = iommu_domain_identity_map(si_domain,
+ (uint64_t)start_pfn << PAGE_SHIFT,
+ (uint64_t)end_pfn << PAGE_SHIFT);
+ return *ret;
+
+}
+
static int si_domain_init(void)
{
struct dmar_drhd_unit *drhd;
struct intel_iommu *iommu;
- int ret = 0;
+ int nid, ret = 0;
si_domain = alloc_domain();
if (!si_domain)
return -EFAULT;
+ pr_debug("Identity mapping domain is domain %d\n", si_domain->id);
for_each_active_iommu(iommu, drhd) {
ret = iommu_attach_domain(si_domain, iommu);
@@ -2035,6 +2067,12 @@
si_domain->flags = DOMAIN_FLAG_STATIC_IDENTITY;
+ for_each_online_node(nid) {
+ work_with_active_regions(nid, si_domain_work_fn, &ret);
+ if (ret)
+ return ret;
+ }
+
return 0;
}
@@ -2079,9 +2117,49 @@
return 0;
}
+static int iommu_should_identity_map(struct pci_dev *pdev, int startup)
+{
+ if (iommu_identity_mapping == 2)
+ return IS_GFX_DEVICE(pdev);
+
+ /*
+ * We want to start off with all devices in the 1:1 domain, and
+ * take them out later if we find they can't access all of memory.
+ *
+ * However, we can't do this for PCI devices behind bridges,
+ * because all PCI devices behind the same bridge will end up
+ * with the same source-id on their transactions.
+ *
+ * Practically speaking, we can't change things around for these
+ * devices at run-time, because we can't be sure there'll be no
+ * DMA transactions in flight for any of their siblings.
+ *
+ * So PCI devices (unless they're on the root bus) as well as
+ * their parent PCI-PCI or PCIe-PCI bridges must be left _out_ of
+ * the 1:1 domain, just in _case_ one of their siblings turns out
+ * not to be able to map all of memory.
+ */
+ if (!pdev->is_pcie) {
+ if (!pci_is_root_bus(pdev->bus))
+ return 0;
+ if (pdev->class >> 8 == PCI_CLASS_BRIDGE_PCI)
+ return 0;
+ } else if (pdev->pcie_type == PCI_EXP_TYPE_PCI_BRIDGE)
+ return 0;
+
+ /*
+ * At boot time, we don't yet know if devices will be 64-bit capable.
+ * Assume that they will -- if they turn out not to be, then we can
+ * take them out of the 1:1 domain later.
+ */
+ if (!startup)
+ return pdev->dma_mask > DMA_BIT_MASK(32);
+
+ return 1;
+}
+
static int iommu_prepare_static_identity_mapping(void)
{
- int i;
struct pci_dev *pdev = NULL;
int ret;
@@ -2089,23 +2167,19 @@
if (ret)
return -EFAULT;
- printk(KERN_INFO "IOMMU: Setting identity map:\n");
for_each_pci_dev(pdev) {
- for (i = 0; i < e820.nr_map; i++) {
- struct e820entry *ei = &e820.map[i];
+ if (iommu_should_identity_map(pdev, 1)) {
+ printk(KERN_INFO "IOMMU: identity mapping for device %s\n",
+ pci_name(pdev));
- if (ei->type == E820_RAM) {
- ret = iommu_prepare_identity_map(pdev,
- ei->addr, ei->addr + ei->size);
- if (ret) {
- printk(KERN_INFO "1:1 mapping to one domain failed.\n");
- return -EFAULT;
- }
- }
+ ret = domain_context_mapping(si_domain, pdev,
+ CONTEXT_TT_MULTI_LEVEL);
+ if (ret)
+ return ret;
+ ret = domain_add_dev_info(si_domain, pdev);
+ if (ret)
+ return ret;
}
- ret = domain_add_dev_info(si_domain, pdev);
- if (ret)
- return ret;
}
return 0;
@@ -2260,6 +2334,10 @@
* identity mapping if iommu_identity_mapping is set.
*/
if (!iommu_pass_through) {
+#ifdef CONFIG_DMAR_BROKEN_GFX_WA
+ if (!iommu_identity_mapping)
+ iommu_identity_mapping = 2;
+#endif
if (iommu_identity_mapping)
iommu_prepare_static_identity_mapping();
/*
@@ -2293,8 +2371,6 @@
}
}
- iommu_prepare_gfx_mapping();
-
iommu_prepare_isa();
}
@@ -2339,50 +2415,40 @@
return ret;
}
-static inline u64 aligned_size(u64 host_addr, size_t size)
+/* Returns a number of VTD pages, but aligned to MM page size */
+static inline unsigned long aligned_nrpages(unsigned long host_addr,
+ size_t size)
{
- u64 addr;
- addr = (host_addr & (~PAGE_MASK)) + size;
- return PAGE_ALIGN(addr);
+ host_addr &= ~PAGE_MASK;
+ return PAGE_ALIGN(host_addr + size) >> VTD_PAGE_SHIFT;
}
-struct iova *
-iommu_alloc_iova(struct dmar_domain *domain, size_t size, u64 end)
-{
- struct iova *piova;
-
- /* Make sure it's in range */
- end = min_t(u64, DOMAIN_MAX_ADDR(domain->gaw), end);
- if (!size || (IOVA_START_ADDR + size > end))
- return NULL;
-
- piova = alloc_iova(&domain->iovad,
- size >> PAGE_SHIFT, IOVA_PFN(end), 1);
- return piova;
-}
-
-static struct iova *
-__intel_alloc_iova(struct device *dev, struct dmar_domain *domain,
- size_t size, u64 dma_mask)
+/* This takes a number of _MM_ pages, not VTD pages */
+static struct iova *intel_alloc_iova(struct device *dev,
+ struct dmar_domain *domain,
+ unsigned long nrpages, uint64_t dma_mask)
{
struct pci_dev *pdev = to_pci_dev(dev);
struct iova *iova = NULL;
- if (dma_mask <= DMA_BIT_MASK(32) || dmar_forcedac)
- iova = iommu_alloc_iova(domain, size, dma_mask);
- else {
+ /* Restrict dma_mask to the width that the iommu can handle */
+ dma_mask = min_t(uint64_t, DOMAIN_MAX_ADDR(domain->gaw), dma_mask);
+
+ if (!dmar_forcedac && dma_mask > DMA_BIT_MASK(32)) {
/*
* First try to allocate an io virtual address in
* DMA_BIT_MASK(32) and if that fails then try allocating
* from higher range
*/
- iova = iommu_alloc_iova(domain, size, DMA_BIT_MASK(32));
- if (!iova)
- iova = iommu_alloc_iova(domain, size, dma_mask);
+ iova = alloc_iova(&domain->iovad, nrpages,
+ IOVA_PFN(DMA_BIT_MASK(32)), 1);
+ if (iova)
+ return iova;
}
-
- if (!iova) {
- printk(KERN_ERR"Allocating iova for %s failed", pci_name(pdev));
+ iova = alloc_iova(&domain->iovad, nrpages, IOVA_PFN(dma_mask), 1);
+ if (unlikely(!iova)) {
+ printk(KERN_ERR "Allocating %ld-page iova for %s failed",
+ nrpages, pci_name(pdev));
return NULL;
}
@@ -2424,16 +2490,24 @@
}
/* Check if the pdev needs to go through non-identity map and unmap process.*/
-static int iommu_no_mapping(struct pci_dev *pdev)
+static int iommu_no_mapping(struct device *dev)
{
+ struct pci_dev *pdev;
int found;
+ if (unlikely(dev->bus != &pci_bus_type))
+ return 1;
+
+ pdev = to_pci_dev(dev);
+ if (iommu_dummy(pdev))
+ return 1;
+
if (!iommu_identity_mapping)
- return iommu_dummy(pdev);
+ return 0;
found = identity_mapping(pdev);
if (found) {
- if (pdev->dma_mask > DMA_BIT_MASK(32))
+ if (iommu_should_identity_map(pdev, 0))
return 1;
else {
/*
@@ -2450,9 +2524,12 @@
* In case of a detached 64 bit DMA device from vm, the device
* is put into si_domain for identity mapping.
*/
- if (pdev->dma_mask > DMA_BIT_MASK(32)) {
+ if (iommu_should_identity_map(pdev, 0)) {
int ret;
ret = domain_add_dev_info(si_domain, pdev);
+ if (ret)
+ return 0;
+ ret = domain_context_mapping(si_domain, pdev, CONTEXT_TT_MULTI_LEVEL);
if (!ret) {
printk(KERN_INFO "64bit %s uses identity mapping\n",
pci_name(pdev));
@@ -2461,7 +2538,7 @@
}
}
- return iommu_dummy(pdev);
+ return 0;
}
static dma_addr_t __intel_map_single(struct device *hwdev, phys_addr_t paddr,
@@ -2477,7 +2554,7 @@
BUG_ON(dir == DMA_NONE);
- if (iommu_no_mapping(pdev))
+ if (iommu_no_mapping(hwdev))
return paddr;
domain = get_valid_domain_for_dev(pdev);
@@ -2485,14 +2562,13 @@
return 0;
iommu = domain_get_iommu(domain);
- size = aligned_size((u64)paddr, size);
+ size = aligned_nrpages(paddr, size);
- iova = __intel_alloc_iova(hwdev, domain, size, pdev->dma_mask);
+ iova = intel_alloc_iova(hwdev, domain, dma_to_mm_pfn(size),
+ pdev->dma_mask);
if (!iova)
goto error;
- start_paddr = (phys_addr_t)iova->pfn_lo << PAGE_SHIFT;
-
/*
* Check if DMAR supports zero-length reads on write only
* mappings..
@@ -2508,20 +2584,20 @@
* might have two guest_addr mapping to the same host paddr, but this
* is not a big problem
*/
- ret = domain_page_mapping(domain, start_paddr,
- ((u64)paddr) & PHYSICAL_PAGE_MASK,
- size, prot);
+ ret = domain_pfn_mapping(domain, mm_to_dma_pfn(iova->pfn_lo),
+ paddr >> VTD_PAGE_SHIFT, size, prot);
if (ret)
goto error;
/* it's a non-present to present mapping. Only flush if caching mode */
if (cap_caching_mode(iommu->cap))
- iommu_flush_iotlb_psi(iommu, 0, start_paddr,
- size >> VTD_PAGE_SHIFT);
+ iommu_flush_iotlb_psi(iommu, 0, mm_to_dma_pfn(iova->pfn_lo), size);
else
iommu_flush_write_buffer(iommu);
- return start_paddr + ((u64)paddr & (~PAGE_MASK));
+ start_paddr = (phys_addr_t)iova->pfn_lo << PAGE_SHIFT;
+ start_paddr += paddr & ~PAGE_MASK;
+ return start_paddr;
error:
if (iova)
@@ -2614,11 +2690,11 @@
{
struct pci_dev *pdev = to_pci_dev(dev);
struct dmar_domain *domain;
- unsigned long start_addr;
+ unsigned long start_pfn, last_pfn;
struct iova *iova;
struct intel_iommu *iommu;
- if (iommu_no_mapping(pdev))
+ if (iommu_no_mapping(dev))
return;
domain = find_domain(pdev);
@@ -2627,22 +2703,25 @@
iommu = domain_get_iommu(domain);
iova = find_iova(&domain->iovad, IOVA_PFN(dev_addr));
- if (!iova)
+ if (WARN_ONCE(!iova, "Driver unmaps unmatched page at PFN %llx\n",
+ (unsigned long long)dev_addr))
return;
- start_addr = iova->pfn_lo << PAGE_SHIFT;
- size = aligned_size((u64)dev_addr, size);
+ start_pfn = mm_to_dma_pfn(iova->pfn_lo);
+ last_pfn = mm_to_dma_pfn(iova->pfn_hi + 1) - 1;
- pr_debug("Device %s unmapping: %zx@%llx\n",
- pci_name(pdev), size, (unsigned long long)start_addr);
+ pr_debug("Device %s unmapping: pfn %lx-%lx\n",
+ pci_name(pdev), start_pfn, last_pfn);
/* clear the whole page */
- dma_pte_clear_range(domain, start_addr, start_addr + size);
+ dma_pte_clear_range(domain, start_pfn, last_pfn);
+
/* free page tables */
- dma_pte_free_pagetable(domain, start_addr, start_addr + size);
+ dma_pte_free_pagetable(domain, start_pfn, last_pfn);
+
if (intel_iommu_strict) {
- iommu_flush_iotlb_psi(iommu, domain->id, start_addr,
- size >> VTD_PAGE_SHIFT);
+ iommu_flush_iotlb_psi(iommu, domain->id, start_pfn,
+ last_pfn - start_pfn + 1);
/* free iova */
__free_iova(&domain->iovad, iova);
} else {
@@ -2700,17 +2779,13 @@
int nelems, enum dma_data_direction dir,
struct dma_attrs *attrs)
{
- int i;
struct pci_dev *pdev = to_pci_dev(hwdev);
struct dmar_domain *domain;
- unsigned long start_addr;
+ unsigned long start_pfn, last_pfn;
struct iova *iova;
- size_t size = 0;
- phys_addr_t addr;
- struct scatterlist *sg;
struct intel_iommu *iommu;
- if (iommu_no_mapping(pdev))
+ if (iommu_no_mapping(hwdev))
return;
domain = find_domain(pdev);
@@ -2719,22 +2794,21 @@
iommu = domain_get_iommu(domain);
iova = find_iova(&domain->iovad, IOVA_PFN(sglist[0].dma_address));
- if (!iova)
+ if (WARN_ONCE(!iova, "Driver unmaps unmatched sglist at PFN %llx\n",
+ (unsigned long long)sglist[0].dma_address))
return;
- for_each_sg(sglist, sg, nelems, i) {
- addr = page_to_phys(sg_page(sg)) + sg->offset;
- size += aligned_size((u64)addr, sg->length);
- }
- start_addr = iova->pfn_lo << PAGE_SHIFT;
+ start_pfn = mm_to_dma_pfn(iova->pfn_lo);
+ last_pfn = mm_to_dma_pfn(iova->pfn_hi + 1) - 1;
/* clear the whole page */
- dma_pte_clear_range(domain, start_addr, start_addr + size);
- /* free page tables */
- dma_pte_free_pagetable(domain, start_addr, start_addr + size);
+ dma_pte_clear_range(domain, start_pfn, last_pfn);
- iommu_flush_iotlb_psi(iommu, domain->id, start_addr,
- size >> VTD_PAGE_SHIFT);
+ /* free page tables */
+ dma_pte_free_pagetable(domain, start_pfn, last_pfn);
+
+ iommu_flush_iotlb_psi(iommu, domain->id, start_pfn,
+ (last_pfn - start_pfn + 1));
/* free iova */
__free_iova(&domain->iovad, iova);
@@ -2757,21 +2831,20 @@
static int intel_map_sg(struct device *hwdev, struct scatterlist *sglist, int nelems,
enum dma_data_direction dir, struct dma_attrs *attrs)
{
- phys_addr_t addr;
int i;
struct pci_dev *pdev = to_pci_dev(hwdev);
struct dmar_domain *domain;
size_t size = 0;
int prot = 0;
- size_t offset = 0;
+ size_t offset_pfn = 0;
struct iova *iova = NULL;
int ret;
struct scatterlist *sg;
- unsigned long start_addr;
+ unsigned long start_vpfn;
struct intel_iommu *iommu;
BUG_ON(dir == DMA_NONE);
- if (iommu_no_mapping(pdev))
+ if (iommu_no_mapping(hwdev))
return intel_nontranslate_map_sg(hwdev, sglist, nelems, dir);
domain = get_valid_domain_for_dev(pdev);
@@ -2780,12 +2853,11 @@
iommu = domain_get_iommu(domain);
- for_each_sg(sglist, sg, nelems, i) {
- addr = page_to_phys(sg_page(sg)) + sg->offset;
- size += aligned_size((u64)addr, sg->length);
- }
+ for_each_sg(sglist, sg, nelems, i)
+ size += aligned_nrpages(sg->offset, sg->length);
- iova = __intel_alloc_iova(hwdev, domain, size, pdev->dma_mask);
+ iova = intel_alloc_iova(hwdev, domain, dma_to_mm_pfn(size),
+ pdev->dma_mask);
if (!iova) {
sglist->dma_length = 0;
return 0;
@@ -2801,35 +2873,24 @@
if (dir == DMA_FROM_DEVICE || dir == DMA_BIDIRECTIONAL)
prot |= DMA_PTE_WRITE;
- start_addr = iova->pfn_lo << PAGE_SHIFT;
- offset = 0;
- for_each_sg(sglist, sg, nelems, i) {
- addr = page_to_phys(sg_page(sg)) + sg->offset;
- size = aligned_size((u64)addr, sg->length);
- ret = domain_page_mapping(domain, start_addr + offset,
- ((u64)addr) & PHYSICAL_PAGE_MASK,
- size, prot);
- if (ret) {
- /* clear the page */
- dma_pte_clear_range(domain, start_addr,
- start_addr + offset);
- /* free page tables */
- dma_pte_free_pagetable(domain, start_addr,
- start_addr + offset);
- /* free iova */
- __free_iova(&domain->iovad, iova);
- return 0;
- }
- sg->dma_address = start_addr + offset +
- ((u64)addr & (~PAGE_MASK));
- sg->dma_length = sg->length;
- offset += size;
+ start_vpfn = mm_to_dma_pfn(iova->pfn_lo);
+
+ ret = domain_sg_mapping(domain, start_vpfn, sglist, mm_to_dma_pfn(size), prot);
+ if (unlikely(ret)) {
+ /* clear the page */
+ dma_pte_clear_range(domain, start_vpfn,
+ start_vpfn + size - 1);
+ /* free page tables */
+ dma_pte_free_pagetable(domain, start_vpfn,
+ start_vpfn + size - 1);
+ /* free iova */
+ __free_iova(&domain->iovad, iova);
+ return 0;
}
/* it's a non-present to present mapping. Only flush if caching mode */
if (cap_caching_mode(iommu->cap))
- iommu_flush_iotlb_psi(iommu, 0, start_addr,
- offset >> VTD_PAGE_SHIFT);
+ iommu_flush_iotlb_psi(iommu, 0, start_vpfn, offset_pfn);
else
iommu_flush_write_buffer(iommu);
@@ -3334,7 +3395,6 @@
int adjust_width;
init_iova_domain(&domain->iovad, DMA_32BIT_PFN);
- spin_lock_init(&domain->mapping_lock);
spin_lock_init(&domain->iommu_lock);
domain_reserve_special_ranges(domain);
@@ -3388,8 +3448,6 @@
static void vm_domain_exit(struct dmar_domain *domain)
{
- u64 end;
-
/* Domain 0 is reserved, so dont process it */
if (!domain)
return;
@@ -3397,14 +3455,12 @@
vm_domain_remove_all_dev_info(domain);
/* destroy iovas */
put_iova_domain(&domain->iovad);
- end = DOMAIN_MAX_ADDR(domain->gaw);
- end = end & (~VTD_PAGE_MASK);
/* clear ptes */
- dma_pte_clear_range(domain, 0, end);
+ dma_pte_clear_range(domain, 0, DOMAIN_MAX_PFN(domain->gaw));
/* free page tables */
- dma_pte_free_pagetable(domain, 0, end);
+ dma_pte_free_pagetable(domain, 0, DOMAIN_MAX_PFN(domain->gaw));
iommu_free_vm_domain(domain);
free_domain_mem(domain);
@@ -3513,7 +3569,7 @@
if ((iommu_prot & IOMMU_CACHE) && dmar_domain->iommu_snooping)
prot |= DMA_PTE_SNP;
- max_addr = (iova & VTD_PAGE_MASK) + VTD_PAGE_ALIGN(size);
+ max_addr = iova + size;
if (dmar_domain->max_addr < max_addr) {
int min_agaw;
u64 end;
@@ -3531,8 +3587,11 @@
}
dmar_domain->max_addr = max_addr;
}
-
- ret = domain_page_mapping(dmar_domain, iova, hpa, size, prot);
+ /* Round up size to next multiple of PAGE_SIZE, if it and
+ the low bits of hpa would take us onto the next page */
+ size = aligned_nrpages(hpa, size);
+ ret = domain_pfn_mapping(dmar_domain, iova >> VTD_PAGE_SHIFT,
+ hpa >> VTD_PAGE_SHIFT, size, prot);
return ret;
}
@@ -3540,15 +3599,15 @@
unsigned long iova, size_t size)
{
struct dmar_domain *dmar_domain = domain->priv;
- dma_addr_t base;
- /* The address might not be aligned */
- base = iova & VTD_PAGE_MASK;
- size = VTD_PAGE_ALIGN(size);
- dma_pte_clear_range(dmar_domain, base, base + size);
+ if (!size)
+ return;
- if (dmar_domain->max_addr == base + size)
- dmar_domain->max_addr = base;
+ dma_pte_clear_range(dmar_domain, iova >> VTD_PAGE_SHIFT,
+ (iova + size - 1) >> VTD_PAGE_SHIFT);
+
+ if (dmar_domain->max_addr == iova + size)
+ dmar_domain->max_addr = iova;
}
static phys_addr_t intel_iommu_iova_to_phys(struct iommu_domain *domain,
@@ -3558,7 +3617,7 @@
struct dma_pte *pte;
u64 phys = 0;
- pte = addr_to_dma_pte(dmar_domain, iova);
+ pte = pfn_to_dma_pte(dmar_domain, iova >> VTD_PAGE_SHIFT);
if (pte)
phys = dma_pte_addr(pte);
diff --git a/drivers/pci/iova.c b/drivers/pci/iova.c
index 2287116..46dd440 100644
--- a/drivers/pci/iova.c
+++ b/drivers/pci/iova.c
@@ -1,9 +1,19 @@
/*
- * Copyright (c) 2006, Intel Corporation.
+ * Copyright © 2006-2009, Intel Corporation.
*
- * This file is released under the GPLv2.
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
*
- * Copyright (C) 2006-2008 Intel Corporation
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc., 59 Temple
+ * Place - Suite 330, Boston, MA 02111-1307 USA.
+ *
* Author: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
*/
@@ -123,7 +133,15 @@
/* Insert the new_iova into domain rbtree by holding writer lock */
/* Add new node and rebalance tree. */
{
- struct rb_node **entry = &((prev)), *parent = NULL;
+ struct rb_node **entry, *parent = NULL;
+
+ /* If we have 'prev', it's a valid place to start the
+ insertion. Otherwise, start from the root. */
+ if (prev)
+ entry = &prev;
+ else
+ entry = &iovad->rbroot.rb_node;
+
/* Figure out where to put new node */
while (*entry) {
struct iova *this = container_of(*entry,
diff --git a/drivers/pci/msi.c b/drivers/pci/msi.c
index d9f06fb..d986afb 100644
--- a/drivers/pci/msi.c
+++ b/drivers/pci/msi.c
@@ -127,17 +127,23 @@
* reliably as devices without an INTx disable bit will then generate a
* level IRQ which will never be cleared.
*/
-static void msi_mask_irq(struct msi_desc *desc, u32 mask, u32 flag)
+static u32 __msi_mask_irq(struct msi_desc *desc, u32 mask, u32 flag)
{
u32 mask_bits = desc->masked;
if (!desc->msi_attrib.maskbit)
- return;
+ return 0;
mask_bits &= ~mask;
mask_bits |= flag;
pci_write_config_dword(desc->dev, desc->mask_pos, mask_bits);
- desc->masked = mask_bits;
+
+ return mask_bits;
+}
+
+static void msi_mask_irq(struct msi_desc *desc, u32 mask, u32 flag)
+{
+ desc->masked = __msi_mask_irq(desc, mask, flag);
}
/*
@@ -147,15 +153,21 @@
* file. This saves a few milliseconds when initialising devices with lots
* of MSI-X interrupts.
*/
-static void msix_mask_irq(struct msi_desc *desc, u32 flag)
+static u32 __msix_mask_irq(struct msi_desc *desc, u32 flag)
{
u32 mask_bits = desc->masked;
unsigned offset = desc->msi_attrib.entry_nr * PCI_MSIX_ENTRY_SIZE +
- PCI_MSIX_ENTRY_VECTOR_CTRL_OFFSET;
+ PCI_MSIX_ENTRY_VECTOR_CTRL;
mask_bits &= ~1;
mask_bits |= flag;
writel(mask_bits, desc->mask_base + offset);
- desc->masked = mask_bits;
+
+ return mask_bits;
+}
+
+static void msix_mask_irq(struct msi_desc *desc, u32 flag)
+{
+ desc->masked = __msix_mask_irq(desc, flag);
}
static void msi_set_mask_bit(unsigned irq, u32 flag)
@@ -188,9 +200,9 @@
void __iomem *base = entry->mask_base +
entry->msi_attrib.entry_nr * PCI_MSIX_ENTRY_SIZE;
- msg->address_lo = readl(base + PCI_MSIX_ENTRY_LOWER_ADDR_OFFSET);
- msg->address_hi = readl(base + PCI_MSIX_ENTRY_UPPER_ADDR_OFFSET);
- msg->data = readl(base + PCI_MSIX_ENTRY_DATA_OFFSET);
+ msg->address_lo = readl(base + PCI_MSIX_ENTRY_LOWER_ADDR);
+ msg->address_hi = readl(base + PCI_MSIX_ENTRY_UPPER_ADDR);
+ msg->data = readl(base + PCI_MSIX_ENTRY_DATA);
} else {
struct pci_dev *dev = entry->dev;
int pos = entry->msi_attrib.pos;
@@ -225,11 +237,9 @@
base = entry->mask_base +
entry->msi_attrib.entry_nr * PCI_MSIX_ENTRY_SIZE;
- writel(msg->address_lo,
- base + PCI_MSIX_ENTRY_LOWER_ADDR_OFFSET);
- writel(msg->address_hi,
- base + PCI_MSIX_ENTRY_UPPER_ADDR_OFFSET);
- writel(msg->data, base + PCI_MSIX_ENTRY_DATA_OFFSET);
+ writel(msg->address_lo, base + PCI_MSIX_ENTRY_LOWER_ADDR);
+ writel(msg->address_hi, base + PCI_MSIX_ENTRY_UPPER_ADDR);
+ writel(msg->data, base + PCI_MSIX_ENTRY_DATA);
} else {
struct pci_dev *dev = entry->dev;
int pos = entry->msi_attrib.pos;
@@ -385,6 +395,7 @@
/* Configure MSI capability structure */
ret = arch_setup_msi_irqs(dev, nvec, PCI_CAP_ID_MSI);
if (ret) {
+ msi_mask_irq(entry, mask, ~mask);
msi_free_irqs(dev);
return ret;
}
@@ -439,8 +450,14 @@
for (i = 0; i < nvec; i++) {
entry = alloc_msi_entry(dev);
- if (!entry)
- break;
+ if (!entry) {
+ if (!i)
+ iounmap(base);
+ else
+ msi_free_irqs(dev);
+ /* No enough memory. Don't try again */
+ return -ENOMEM;
+ }
j = entries[i].entry;
entry->msi_attrib.is_msix = 1;
@@ -487,7 +504,7 @@
set_irq_msi(entry->irq, entry);
j = entries[i].entry;
entry->masked = readl(base + j * PCI_MSIX_ENTRY_SIZE +
- PCI_MSIX_ENTRY_VECTOR_CTRL_OFFSET);
+ PCI_MSIX_ENTRY_VECTOR_CTRL);
msix_mask_irq(entry, 1);
i++;
}
@@ -611,9 +628,11 @@
pci_intx_for_msi(dev, 1);
dev->msi_enabled = 0;
+ /* Return the device with MSI unmasked as initial states */
pci_read_config_word(dev, pos + PCI_MSI_FLAGS, &ctrl);
mask = msi_capable_mask(ctrl);
- msi_mask_irq(desc, mask, ~mask);
+ /* Keep cached state to be restored */
+ __msi_mask_irq(desc, mask, ~mask);
/* Restore dev->irq to its default pin-assertion irq */
dev->irq = desc->msi_attrib.default_irq;
@@ -653,7 +672,6 @@
list_for_each_entry_safe(entry, tmp, &dev->msi_list, list) {
if (entry->msi_attrib.is_msix) {
- msix_mask_irq(entry, 1);
if (list_is_last(&entry->list, &dev->msi_list))
iounmap(entry->mask_base);
}
@@ -741,9 +759,17 @@
void pci_msix_shutdown(struct pci_dev* dev)
{
+ struct msi_desc *entry;
+
if (!pci_msi_enable || !dev || !dev->msix_enabled)
return;
+ /* Return the device with MSI-X masked as initial states */
+ list_for_each_entry(entry, &dev->msi_list, list) {
+ /* Keep cached states to be restored */
+ __msix_mask_irq(entry, 1);
+ }
+
msix_set_enable(dev, 0);
pci_intx_for_msi(dev, 1);
dev->msix_enabled = 0;
diff --git a/drivers/pci/msi.h b/drivers/pci/msi.h
index a066284..de27c1c 100644
--- a/drivers/pci/msi.h
+++ b/drivers/pci/msi.h
@@ -6,11 +6,11 @@
#ifndef MSI_H
#define MSI_H
-#define PCI_MSIX_ENTRY_SIZE 16
-#define PCI_MSIX_ENTRY_LOWER_ADDR_OFFSET 0
-#define PCI_MSIX_ENTRY_UPPER_ADDR_OFFSET 4
-#define PCI_MSIX_ENTRY_DATA_OFFSET 8
-#define PCI_MSIX_ENTRY_VECTOR_CTRL_OFFSET 12
+#define PCI_MSIX_ENTRY_SIZE 16
+#define PCI_MSIX_ENTRY_LOWER_ADDR 0
+#define PCI_MSIX_ENTRY_UPPER_ADDR 4
+#define PCI_MSIX_ENTRY_DATA 8
+#define PCI_MSIX_ENTRY_VECTOR_CTRL 12
#define msi_control_reg(base) (base + PCI_MSI_FLAGS)
#define msi_lower_address_reg(base) (base + PCI_MSI_ADDRESS_LO)
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index 6c93af5..dbd0f94 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -1517,11 +1517,20 @@
*
* Perform INTx swizzling for a device behind one level of bridge. This is
* required by section 9.1 of the PCI-to-PCI bridge specification for devices
- * behind bridges on add-in cards.
+ * behind bridges on add-in cards. For devices with ARI enabled, the slot
+ * number is always 0 (see the Implementation Note in section 2.2.8.1 of
+ * the PCI Express Base Specification, Revision 2.1)
*/
u8 pci_swizzle_interrupt_pin(struct pci_dev *dev, u8 pin)
{
- return (((pin - 1) + PCI_SLOT(dev->devfn)) % 4) + 1;
+ int slot;
+
+ if (pci_ari_enabled(dev->bus))
+ slot = 0;
+ else
+ slot = PCI_SLOT(dev->devfn);
+
+ return (((pin - 1) + slot) % 4) + 1;
}
int
@@ -2171,7 +2180,7 @@
u16 ctrl;
struct pci_dev *pdev;
- if (dev->subordinate)
+ if (pci_is_root_bus(dev->bus) || dev->subordinate || !dev->bus->self)
return -ENOTTY;
list_for_each_entry(pdev, &dev->bus->devices, bus_list)
diff --git a/drivers/pci/pcie/aer/ecrc.c b/drivers/pci/pcie/aer/ecrc.c
index ece97df..a928d8a 100644
--- a/drivers/pci/pcie/aer/ecrc.c
+++ b/drivers/pci/pcie/aer/ecrc.c
@@ -106,7 +106,7 @@
disable_ecrc_checking(dev);
break;
case ECRC_POLICY_ON:
- enable_ecrc_checking(dev);;
+ enable_ecrc_checking(dev);
break;
default:
return;
diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index 56552d7..06b9656 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -1058,6 +1058,11 @@
}
DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_SERVERWORKS, PCI_ANY_ID, quirk_no_ata_d3);
DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_ATI, PCI_ANY_ID, quirk_no_ata_d3);
+/* ALi loses some register settings that we cannot then restore */
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_AL, PCI_ANY_ID, quirk_no_ata_d3);
+/* VIA comes back fine but we need to keep it alive or ACPI GTM failures
+ occur when mode detecting */
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_VIA, PCI_ANY_ID, quirk_no_ata_d3);
/* This was originally an Alpha specific thing, but it really fits here.
* The i82375 PCI/EISA bridge appears as non-classified. Fix that.
diff --git a/drivers/pci/slot.c b/drivers/pci/slot.c
index eddb074..8c02b6c 100644
--- a/drivers/pci/slot.c
+++ b/drivers/pci/slot.c
@@ -311,7 +311,7 @@
#include <linux/pci_hotplug.h>
/**
* pci_hp_create_link - create symbolic link to the hotplug driver module.
- * @slot: struct pci_slot
+ * @pci_slot: struct pci_slot
*
* Helper function for pci_hotplug_core.c to create symbolic link to
* the hotplug driver module.
@@ -334,7 +334,7 @@
/**
* pci_hp_remove_link - remove symbolic link to the hotplug driver module.
- * @slot: struct pci_slot
+ * @pci_slot: struct pci_slot
*
* Helper function for pci_hotplug_core.c to remove symbolic link to
* the hotplug driver module.
diff --git a/drivers/pci/syscall.c b/drivers/pci/syscall.c
index ec22284..e1c1ec5 100644
--- a/drivers/pci/syscall.c
+++ b/drivers/pci/syscall.c
@@ -9,7 +9,6 @@
#include <linux/errno.h>
#include <linux/pci.h>
-#include <linux/smp_lock.h>
#include <linux/syscalls.h>
#include <asm/uaccess.h>
#include "pci.h"
diff --git a/drivers/pcmcia/tcic.c b/drivers/pcmcia/tcic.c
index 9ad97ea..8eb0423 100644
--- a/drivers/pcmcia/tcic.c
+++ b/drivers/pcmcia/tcic.c
@@ -472,7 +472,8 @@
init_timer(&poll_timer);
/* Build interrupt mask */
- printk(", %d sockets\n" KERN_INFO " irq list (", sockets);
+ printk(KERN_CONT ", %d sockets\n", sockets);
+ printk(KERN_INFO " irq list (");
if (irq_list_count == 0)
mask = irq_mask;
else
diff --git a/drivers/pcmcia/vrc4171_card.c b/drivers/pcmcia/vrc4171_card.c
index 659421d..d4ad50d 100644
--- a/drivers/pcmcia/vrc4171_card.c
+++ b/drivers/pcmcia/vrc4171_card.c
@@ -1,7 +1,7 @@
/*
* vrc4171_card.c, NEC VRC4171 Card Controller driver for Socket Services.
*
- * Copyright (C) 2003-2005 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ * Copyright (C) 2003-2005 Yoichi Yuasa <yuasa@linux-mips.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -32,7 +32,7 @@
#include "i82365.h"
MODULE_DESCRIPTION("NEC VRC4171 Card Controllers driver for Socket Services");
-MODULE_AUTHOR("Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>");
+MODULE_AUTHOR("Yoichi Yuasa <yuasa@linux-mips.org>");
MODULE_LICENSE("GPL");
#define CARD_MAX_SLOTS 2
diff --git a/drivers/pcmcia/vrc4173_cardu.c b/drivers/pcmcia/vrc4173_cardu.c
index 812f038..9b3c158 100644
--- a/drivers/pcmcia/vrc4173_cardu.c
+++ b/drivers/pcmcia/vrc4173_cardu.c
@@ -6,7 +6,7 @@
* NEC VRC4173 CARDU driver for Socket Services
* (This device doesn't support CardBus. it is supporting only 16bit PC Card.)
*
- * Copyright 2002,2003 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ * Copyright 2002,2003 Yoichi Yuasa <yuasa@linux-mips.org>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
@@ -41,7 +41,7 @@
#include "vrc4173_cardu.h"
MODULE_DESCRIPTION("NEC VRC4173 CARDU driver for Socket Services");
-MODULE_AUTHOR("Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>");
+MODULE_AUTHOR("Yoichi Yuasa <yuasa@linux-mips.org>");
MODULE_LICENSE("GPL");
static int vrc4173_cardu_slots;
diff --git a/drivers/pcmcia/vrc4173_cardu.h b/drivers/pcmcia/vrc4173_cardu.h
index 7d77c74..a7d9601 100644
--- a/drivers/pcmcia/vrc4173_cardu.h
+++ b/drivers/pcmcia/vrc4173_cardu.h
@@ -5,7 +5,7 @@
* BRIEF MODULE DESCRIPTION
* Include file for NEC VRC4173 CARDU.
*
- * Copyright 2002 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ * Copyright 2002 Yoichi Yuasa <yuasa@linux-mips.org>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig
index 7232fe7..46dad12 100644
--- a/drivers/platform/x86/Kconfig
+++ b/drivers/platform/x86/Kconfig
@@ -355,6 +355,7 @@
depends on INPUT
depends on EXPERIMENTAL
depends on RFKILL || RFKILL = n
+ depends on HOTPLUG_PCI
select BACKLIGHT_CLASS_DEVICE
select HWMON
---help---
diff --git a/drivers/platform/x86/eeepc-laptop.c b/drivers/platform/x86/eeepc-laptop.c
index 4207b26..ec560f1 100644
--- a/drivers/platform/x86/eeepc-laptop.c
+++ b/drivers/platform/x86/eeepc-laptop.c
@@ -16,6 +16,8 @@
* GNU General Public License for more details.
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/init.h>
@@ -31,6 +33,7 @@
#include <linux/input.h>
#include <linux/rfkill.h>
#include <linux/pci.h>
+#include <linux/pci_hotplug.h>
#define EEEPC_LAPTOP_VERSION "0.1"
@@ -40,11 +43,6 @@
#define EEEPC_HOTK_DEVICE_NAME "Hotkey"
#define EEEPC_HOTK_HID "ASUS010"
-#define EEEPC_LOG EEEPC_HOTK_FILE ": "
-#define EEEPC_ERR KERN_ERR EEEPC_LOG
-#define EEEPC_WARNING KERN_WARNING EEEPC_LOG
-#define EEEPC_NOTICE KERN_NOTICE EEEPC_LOG
-#define EEEPC_INFO KERN_INFO EEEPC_LOG
/*
* Definitions for Asus EeePC
@@ -141,8 +139,10 @@
u16 event_count[128]; /* count for each event */
struct input_dev *inputdev;
u16 *keycode_map;
- struct rfkill *eeepc_wlan_rfkill;
- struct rfkill *eeepc_bluetooth_rfkill;
+ struct rfkill *wlan_rfkill;
+ struct rfkill *bluetooth_rfkill;
+ struct rfkill *wwan3g_rfkill;
+ struct hotplug_slot *hotplug_slot;
};
/* The actual device the driver binds to */
@@ -213,6 +213,15 @@
},
};
+/* PCI hotplug ops */
+static int eeepc_get_adapter_status(struct hotplug_slot *slot, u8 *value);
+
+static struct hotplug_slot_ops eeepc_hotplug_slot_ops = {
+ .owner = THIS_MODULE,
+ .get_adapter_status = eeepc_get_adapter_status,
+ .get_power_status = eeepc_get_adapter_status,
+};
+
/* The backlight device /sys/class/backlight */
static struct backlight_device *eeepc_backlight_device;
@@ -274,20 +283,20 @@
if (method == NULL)
return -ENODEV;
if (write_acpi_int(ehotk->handle, method, value, NULL))
- printk(EEEPC_WARNING "Error writing %s\n", method);
+ pr_warning("Error writing %s\n", method);
}
return 0;
}
static int get_acpi(int cm)
{
- int value = -1;
+ int value = -ENODEV;
if ((ehotk->cm_supported & (0x1 << cm))) {
const char *method = cm_getv[cm];
if (method == NULL)
return -ENODEV;
if (read_acpi_int(ehotk->handle, method, &value))
- printk(EEEPC_WARNING "Error reading %s\n", method);
+ pr_warning("Error reading %s\n", method);
}
return value;
}
@@ -359,13 +368,19 @@
rv = parse_arg(buf, count, &value);
if (rv > 0)
- set_acpi(cm, value);
+ value = set_acpi(cm, value);
+ if (value < 0)
+ return value;
return rv;
}
static ssize_t show_sys_acpi(int cm, char *buf)
{
- return sprintf(buf, "%d\n", get_acpi(cm));
+ int value = get_acpi(cm);
+
+ if (value < 0)
+ return value;
+ return sprintf(buf, "%d\n", value);
}
#define EEEPC_CREATE_DEVICE_ATTR(_name, _cm) \
@@ -539,6 +554,28 @@
return -EINVAL;
}
+static void cmsg_quirk(int cm, const char *name)
+{
+ int dummy;
+
+ /* Some BIOSes do not report cm although it is avaliable.
+ Check if cm_getv[cm] works and, if yes, assume cm should be set. */
+ if (!(ehotk->cm_supported & (1 << cm))
+ && !read_acpi_int(ehotk->handle, cm_getv[cm], &dummy)) {
+ pr_info("%s (%x) not reported by BIOS,"
+ " enabling anyway\n", name, 1 << cm);
+ ehotk->cm_supported |= 1 << cm;
+ }
+}
+
+static void cmsg_quirks(void)
+{
+ cmsg_quirk(CM_ASL_LID, "LID");
+ cmsg_quirk(CM_ASL_TYPE, "TYPE");
+ cmsg_quirk(CM_ASL_PANELPOWER, "PANELPOWER");
+ cmsg_quirk(CM_ASL_TPD, "TPD");
+}
+
static int eeepc_hotk_check(void)
{
const struct key_entry *key;
@@ -551,26 +588,24 @@
if (ehotk->device->status.present) {
if (write_acpi_int(ehotk->handle, "INIT", ehotk->init_flag,
&buffer)) {
- printk(EEEPC_ERR "Hotkey initialization failed\n");
+ pr_err("Hotkey initialization failed\n");
return -ENODEV;
} else {
- printk(EEEPC_NOTICE "Hotkey init flags 0x%x\n",
- ehotk->init_flag);
+ pr_notice("Hotkey init flags 0x%x\n", ehotk->init_flag);
}
/* get control methods supported */
if (read_acpi_int(ehotk->handle, "CMSG"
, &ehotk->cm_supported)) {
- printk(EEEPC_ERR
- "Get control methods supported failed\n");
+ pr_err("Get control methods supported failed\n");
return -ENODEV;
} else {
- printk(EEEPC_INFO
- "Get control methods supported: 0x%x\n",
- ehotk->cm_supported);
+ cmsg_quirks();
+ pr_info("Get control methods supported: 0x%x\n",
+ ehotk->cm_supported);
}
ehotk->inputdev = input_allocate_device();
if (!ehotk->inputdev) {
- printk(EEEPC_INFO "Unable to allocate input device\n");
+ pr_info("Unable to allocate input device\n");
return 0;
}
ehotk->inputdev->name = "Asus EeePC extra buttons";
@@ -589,12 +624,12 @@
}
result = input_register_device(ehotk->inputdev);
if (result) {
- printk(EEEPC_INFO "Unable to register input device\n");
+ pr_info("Unable to register input device\n");
input_free_device(ehotk->inputdev);
return 0;
}
} else {
- printk(EEEPC_ERR "Hotkey device not present, aborting\n");
+ pr_err("Hotkey device not present, aborting\n");
return -EINVAL;
}
return 0;
@@ -612,6 +647,19 @@
return -1;
}
+static int eeepc_get_adapter_status(struct hotplug_slot *hotplug_slot,
+ u8 *value)
+{
+ int val = get_acpi(CM_ASL_WLAN);
+
+ if (val == 1 || val == 0)
+ *value = val;
+ else
+ return -EINVAL;
+
+ return 0;
+}
+
static void eeepc_rfkill_hotplug(void)
{
struct pci_dev *dev;
@@ -619,7 +667,7 @@
bool blocked;
if (!bus) {
- printk(EEEPC_WARNING "Unable to find PCI bus 1?\n");
+ pr_warning("Unable to find PCI bus 1?\n");
return;
}
@@ -635,7 +683,7 @@
if (dev) {
pci_bus_assign_resources(bus);
if (pci_bus_add_device(dev))
- printk(EEEPC_ERR "Unable to hotplug wifi\n");
+ pr_err("Unable to hotplug wifi\n");
}
} else {
dev = pci_get_slot(bus, 0);
@@ -645,7 +693,7 @@
}
}
- rfkill_set_sw_state(ehotk->eeepc_wlan_rfkill, blocked);
+ rfkill_set_sw_state(ehotk->wlan_rfkill, blocked);
}
static void eeepc_rfkill_notify(acpi_handle handle, u32 event, void *data)
@@ -718,8 +766,7 @@
eeepc_rfkill_notify,
NULL);
if (ACPI_FAILURE(status))
- printk(EEEPC_WARNING
- "Failed to register notify on %s\n", node);
+ pr_warning("Failed to register notify on %s\n", node);
} else
return -ENODEV;
@@ -738,19 +785,66 @@
ACPI_SYSTEM_NOTIFY,
eeepc_rfkill_notify);
if (ACPI_FAILURE(status))
- printk(EEEPC_ERR
- "Error removing rfkill notify handler %s\n",
+ pr_err("Error removing rfkill notify handler %s\n",
node);
}
}
+static void eeepc_cleanup_pci_hotplug(struct hotplug_slot *hotplug_slot)
+{
+ kfree(hotplug_slot->info);
+ kfree(hotplug_slot);
+}
+
+static int eeepc_setup_pci_hotplug(void)
+{
+ int ret = -ENOMEM;
+ struct pci_bus *bus = pci_find_bus(0, 1);
+
+ if (!bus) {
+ pr_err("Unable to find wifi PCI bus\n");
+ return -ENODEV;
+ }
+
+ ehotk->hotplug_slot = kzalloc(sizeof(struct hotplug_slot), GFP_KERNEL);
+ if (!ehotk->hotplug_slot)
+ goto error_slot;
+
+ ehotk->hotplug_slot->info = kzalloc(sizeof(struct hotplug_slot_info),
+ GFP_KERNEL);
+ if (!ehotk->hotplug_slot->info)
+ goto error_info;
+
+ ehotk->hotplug_slot->private = ehotk;
+ ehotk->hotplug_slot->release = &eeepc_cleanup_pci_hotplug;
+ ehotk->hotplug_slot->ops = &eeepc_hotplug_slot_ops;
+ eeepc_get_adapter_status(ehotk->hotplug_slot,
+ &ehotk->hotplug_slot->info->adapter_status);
+
+ ret = pci_hp_register(ehotk->hotplug_slot, bus, 0, "eeepc-wifi");
+ if (ret) {
+ pr_err("Unable to register hotplug slot - %d\n", ret);
+ goto error_register;
+ }
+
+ return 0;
+
+error_register:
+ kfree(ehotk->hotplug_slot->info);
+error_info:
+ kfree(ehotk->hotplug_slot);
+ ehotk->hotplug_slot = NULL;
+error_slot:
+ return ret;
+}
+
static int eeepc_hotk_add(struct acpi_device *device)
{
int result;
if (!device)
return -EINVAL;
- printk(EEEPC_NOTICE EEEPC_HOTK_NAME "\n");
+ pr_notice(EEEPC_HOTK_NAME "\n");
ehotk = kzalloc(sizeof(struct eeepc_hotk), GFP_KERNEL);
if (!ehotk)
return -ENOMEM;
@@ -764,53 +858,8 @@
if (result)
goto ehotk_fail;
- eeepc_register_rfkill_notifier("\\_SB.PCI0.P0P6");
- eeepc_register_rfkill_notifier("\\_SB.PCI0.P0P7");
-
- if (get_acpi(CM_ASL_WLAN) != -1) {
- ehotk->eeepc_wlan_rfkill = rfkill_alloc("eeepc-wlan",
- &device->dev,
- RFKILL_TYPE_WLAN,
- &eeepc_rfkill_ops,
- (void *)CM_ASL_WLAN);
-
- if (!ehotk->eeepc_wlan_rfkill)
- goto wlan_fail;
-
- rfkill_init_sw_state(ehotk->eeepc_wlan_rfkill,
- get_acpi(CM_ASL_WLAN) != 1);
- result = rfkill_register(ehotk->eeepc_wlan_rfkill);
- if (result)
- goto wlan_fail;
- }
-
- if (get_acpi(CM_ASL_BLUETOOTH) != -1) {
- ehotk->eeepc_bluetooth_rfkill =
- rfkill_alloc("eeepc-bluetooth",
- &device->dev,
- RFKILL_TYPE_BLUETOOTH,
- &eeepc_rfkill_ops,
- (void *)CM_ASL_BLUETOOTH);
-
- if (!ehotk->eeepc_bluetooth_rfkill)
- goto bluetooth_fail;
-
- rfkill_init_sw_state(ehotk->eeepc_bluetooth_rfkill,
- get_acpi(CM_ASL_BLUETOOTH) != 1);
- result = rfkill_register(ehotk->eeepc_bluetooth_rfkill);
- if (result)
- goto bluetooth_fail;
- }
-
return 0;
- bluetooth_fail:
- rfkill_destroy(ehotk->eeepc_bluetooth_rfkill);
- rfkill_unregister(ehotk->eeepc_wlan_rfkill);
- wlan_fail:
- rfkill_destroy(ehotk->eeepc_wlan_rfkill);
- eeepc_unregister_rfkill_notifier("\\_SB.PCI0.P0P6");
- eeepc_unregister_rfkill_notifier("\\_SB.PCI0.P0P7");
ehotk_fail:
kfree(ehotk);
ehotk = NULL;
@@ -823,16 +872,13 @@
if (!device || !acpi_driver_data(device))
return -EINVAL;
- eeepc_unregister_rfkill_notifier("\\_SB.PCI0.P0P6");
- eeepc_unregister_rfkill_notifier("\\_SB.PCI0.P0P7");
-
kfree(ehotk);
return 0;
}
static int eeepc_hotk_resume(struct acpi_device *device)
{
- if (ehotk->eeepc_wlan_rfkill) {
+ if (ehotk->wlan_rfkill) {
bool wlan;
/* Workaround - it seems that _PTS disables the wireless
@@ -844,14 +890,13 @@
wlan = get_acpi(CM_ASL_WLAN);
set_acpi(CM_ASL_WLAN, wlan);
- rfkill_set_sw_state(ehotk->eeepc_wlan_rfkill,
- wlan != 1);
+ rfkill_set_sw_state(ehotk->wlan_rfkill, wlan != 1);
eeepc_rfkill_hotplug();
}
- if (ehotk->eeepc_bluetooth_rfkill)
- rfkill_set_sw_state(ehotk->eeepc_bluetooth_rfkill,
+ if (ehotk->bluetooth_rfkill)
+ rfkill_set_sw_state(ehotk->bluetooth_rfkill,
get_acpi(CM_ASL_BLUETOOTH) != 1);
return 0;
@@ -973,10 +1018,16 @@
static void eeepc_rfkill_exit(void)
{
- if (ehotk->eeepc_wlan_rfkill)
- rfkill_unregister(ehotk->eeepc_wlan_rfkill);
- if (ehotk->eeepc_bluetooth_rfkill)
- rfkill_unregister(ehotk->eeepc_bluetooth_rfkill);
+ eeepc_unregister_rfkill_notifier("\\_SB.PCI0.P0P6");
+ eeepc_unregister_rfkill_notifier("\\_SB.PCI0.P0P7");
+ if (ehotk->wlan_rfkill)
+ rfkill_unregister(ehotk->wlan_rfkill);
+ if (ehotk->bluetooth_rfkill)
+ rfkill_unregister(ehotk->bluetooth_rfkill);
+ if (ehotk->wwan3g_rfkill)
+ rfkill_unregister(ehotk->wwan3g_rfkill);
+ if (ehotk->hotplug_slot)
+ pci_hp_deregister(ehotk->hotplug_slot);
}
static void eeepc_input_exit(void)
@@ -1011,6 +1062,75 @@
platform_driver_unregister(&platform_driver);
}
+static int eeepc_new_rfkill(struct rfkill **rfkill,
+ const char *name, struct device *dev,
+ enum rfkill_type type, int cm)
+{
+ int result;
+
+ result = get_acpi(cm);
+ if (result < 0)
+ return result;
+
+ *rfkill = rfkill_alloc(name, dev, type,
+ &eeepc_rfkill_ops, (void *)(unsigned long)cm);
+
+ if (!*rfkill)
+ return -EINVAL;
+
+ rfkill_init_sw_state(*rfkill, get_acpi(cm) != 1);
+ result = rfkill_register(*rfkill);
+ if (result) {
+ rfkill_destroy(*rfkill);
+ *rfkill = NULL;
+ return result;
+ }
+ return 0;
+}
+
+
+static int eeepc_rfkill_init(struct device *dev)
+{
+ int result = 0;
+
+ eeepc_register_rfkill_notifier("\\_SB.PCI0.P0P6");
+ eeepc_register_rfkill_notifier("\\_SB.PCI0.P0P7");
+
+ result = eeepc_new_rfkill(&ehotk->wlan_rfkill,
+ "eeepc-wlan", dev,
+ RFKILL_TYPE_WLAN, CM_ASL_WLAN);
+
+ if (result && result != -ENODEV)
+ goto exit;
+
+ result = eeepc_new_rfkill(&ehotk->bluetooth_rfkill,
+ "eeepc-bluetooth", dev,
+ RFKILL_TYPE_BLUETOOTH, CM_ASL_BLUETOOTH);
+
+ if (result && result != -ENODEV)
+ goto exit;
+
+ result = eeepc_new_rfkill(&ehotk->wwan3g_rfkill,
+ "eeepc-wwan3g", dev,
+ RFKILL_TYPE_WWAN, CM_ASL_3G);
+
+ if (result && result != -ENODEV)
+ goto exit;
+
+ result = eeepc_setup_pci_hotplug();
+ /*
+ * If we get -EBUSY then something else is handling the PCI hotplug -
+ * don't fail in this case
+ */
+ if (result == -EBUSY)
+ result = 0;
+
+exit:
+ if (result && result != -ENODEV)
+ eeepc_rfkill_exit();
+ return result;
+}
+
static int eeepc_backlight_init(struct device *dev)
{
struct backlight_device *bd;
@@ -1018,8 +1138,7 @@
bd = backlight_device_register(EEEPC_HOTK_FILE, dev,
NULL, &eeepcbl_ops);
if (IS_ERR(bd)) {
- printk(EEEPC_ERR
- "Could not register eeepc backlight device\n");
+ pr_err("Could not register eeepc backlight device\n");
eeepc_backlight_device = NULL;
return PTR_ERR(bd);
}
@@ -1038,8 +1157,7 @@
hwmon = hwmon_device_register(dev);
if (IS_ERR(hwmon)) {
- printk(EEEPC_ERR
- "Could not register eeepc hwmon device\n");
+ pr_err("Could not register eeepc hwmon device\n");
eeepc_hwmon_device = NULL;
return PTR_ERR(hwmon);
}
@@ -1065,19 +1183,6 @@
acpi_bus_unregister_driver(&eeepc_hotk_driver);
return -ENODEV;
}
- dev = acpi_get_physical_device(ehotk->device->handle);
-
- if (!acpi_video_backlight_support()) {
- result = eeepc_backlight_init(dev);
- if (result)
- goto fail_backlight;
- } else
- printk(EEEPC_INFO "Backlight controlled by ACPI video "
- "driver\n");
-
- result = eeepc_hwmon_init(dev);
- if (result)
- goto fail_hwmon;
eeepc_enable_camera();
@@ -1097,7 +1202,33 @@
&platform_attribute_group);
if (result)
goto fail_sysfs;
+
+ dev = &platform_device->dev;
+
+ if (!acpi_video_backlight_support()) {
+ result = eeepc_backlight_init(dev);
+ if (result)
+ goto fail_backlight;
+ } else
+ pr_info("Backlight controlled by ACPI video "
+ "driver\n");
+
+ result = eeepc_hwmon_init(dev);
+ if (result)
+ goto fail_hwmon;
+
+ result = eeepc_rfkill_init(dev);
+ if (result)
+ goto fail_rfkill;
+
return 0;
+fail_rfkill:
+ eeepc_hwmon_exit();
+fail_hwmon:
+ eeepc_backlight_exit();
+fail_backlight:
+ sysfs_remove_group(&platform_device->dev.kobj,
+ &platform_attribute_group);
fail_sysfs:
platform_device_del(platform_device);
fail_platform_device2:
@@ -1105,12 +1236,7 @@
fail_platform_device1:
platform_driver_unregister(&platform_driver);
fail_platform_driver:
- eeepc_hwmon_exit();
-fail_hwmon:
- eeepc_backlight_exit();
-fail_backlight:
eeepc_input_exit();
- eeepc_rfkill_exit();
return result;
}
diff --git a/drivers/platform/x86/hp-wmi.c b/drivers/platform/x86/hp-wmi.c
index 4ac2311..ca50856 100644
--- a/drivers/platform/x86/hp-wmi.c
+++ b/drivers/platform/x86/hp-wmi.c
@@ -171,7 +171,7 @@
static int hp_wmi_set_block(void *data, bool blocked)
{
unsigned long b = (unsigned long) data;
- int query = BIT(b + 8) | ((!!blocked) << b);
+ int query = BIT(b + 8) | ((!blocked) << b);
return hp_wmi_perform_query(HPWMI_WIRELESS_QUERY, 1, query);
}
diff --git a/drivers/power/wm97xx_battery.c b/drivers/power/wm97xx_battery.c
index 8bde921..b787335 100644
--- a/drivers/power/wm97xx_battery.c
+++ b/drivers/power/wm97xx_battery.c
@@ -33,14 +33,14 @@
static unsigned long wm97xx_read_bat(struct power_supply *bat_ps)
{
- return wm97xx_read_aux_adc(bat_ps->dev->parent->driver_data,
+ return wm97xx_read_aux_adc(dev_get_drvdata(bat_ps->dev->parent),
pdata->batt_aux) * pdata->batt_mult /
pdata->batt_div;
}
static unsigned long wm97xx_read_temp(struct power_supply *bat_ps)
{
- return wm97xx_read_aux_adc(bat_ps->dev->parent->driver_data,
+ return wm97xx_read_aux_adc(dev_get_drvdata(bat_ps->dev->parent),
pdata->temp_aux) * pdata->temp_mult /
pdata->temp_div;
}
diff --git a/drivers/rtc/rtc-bfin.c b/drivers/rtc/rtc-bfin.c
index aafd3e6..a118eb0 100644
--- a/drivers/rtc/rtc-bfin.c
+++ b/drivers/rtc/rtc-bfin.c
@@ -1,8 +1,8 @@
/*
* Blackfin On-Chip Real Time Clock Driver
- * Supports BF52[257]/BF53[123]/BF53[467]/BF54[24789]
+ * Supports BF51x/BF52x/BF53[123]/BF53[467]/BF54x
*
- * Copyright 2004-2008 Analog Devices Inc.
+ * Copyright 2004-2009 Analog Devices Inc.
*
* Enter bugs at http://blackfin.uclinux.org/
*
@@ -363,7 +363,7 @@
struct bfin_rtc *rtc;
struct device *dev = &pdev->dev;
int ret = 0;
- unsigned long timeout;
+ unsigned long timeout = jiffies + HZ;
dev_dbg_stamp(dev);
@@ -374,32 +374,32 @@
platform_set_drvdata(pdev, rtc);
device_init_wakeup(dev, 1);
+ /* Register our RTC with the RTC framework */
+ rtc->rtc_dev = rtc_device_register(pdev->name, dev, &bfin_rtc_ops,
+ THIS_MODULE);
+ if (unlikely(IS_ERR(rtc->rtc_dev))) {
+ ret = PTR_ERR(rtc->rtc_dev);
+ goto err;
+ }
+
/* Grab the IRQ and init the hardware */
ret = request_irq(IRQ_RTC, bfin_rtc_interrupt, IRQF_SHARED, pdev->name, dev);
if (unlikely(ret))
- goto err;
+ goto err_reg;
/* sometimes the bootloader touched things, but the write complete was not
* enabled, so let's just do a quick timeout here since the IRQ will not fire ...
*/
- timeout = jiffies + HZ;
while (bfin_read_RTC_ISTAT() & RTC_ISTAT_WRITE_PENDING)
if (time_after(jiffies, timeout))
break;
bfin_rtc_reset(dev, RTC_ISTAT_WRITE_COMPLETE);
bfin_write_RTC_SWCNT(0);
- /* Register our RTC with the RTC framework */
- rtc->rtc_dev = rtc_device_register(pdev->name, dev, &bfin_rtc_ops, THIS_MODULE);
- if (unlikely(IS_ERR(rtc->rtc_dev))) {
- ret = PTR_ERR(rtc->rtc_dev);
- goto err_irq;
- }
-
return 0;
- err_irq:
- free_irq(IRQ_RTC, dev);
- err:
+err_reg:
+ rtc_device_unregister(rtc->rtc_dev);
+err:
kfree(rtc);
return ret;
}
diff --git a/drivers/rtc/rtc-ds1374.c b/drivers/rtc/rtc-ds1374.c
index 32b2773..713f7bf 100644
--- a/drivers/rtc/rtc-ds1374.c
+++ b/drivers/rtc/rtc-ds1374.c
@@ -283,7 +283,7 @@
stat = i2c_smbus_read_byte_data(client, DS1374_REG_SR);
if (stat < 0)
- return;
+ goto unlock;
if (stat & DS1374_REG_SR_AF) {
stat &= ~DS1374_REG_SR_AF;
@@ -302,7 +302,7 @@
out:
if (!ds1374->exiting)
enable_irq(client->irq);
-
+unlock:
mutex_unlock(&ds1374->mutex);
}
diff --git a/drivers/rtc/rtc-vr41xx.c b/drivers/rtc/rtc-vr41xx.c
index f11297a..2c839d0 100644
--- a/drivers/rtc/rtc-vr41xx.c
+++ b/drivers/rtc/rtc-vr41xx.c
@@ -1,7 +1,7 @@
/*
* Driver for NEC VR4100 series Real Time Clock unit.
*
- * Copyright (C) 2003-2008 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ * Copyright (C) 2003-2008 Yoichi Yuasa <yuasa@linux-mips.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -33,7 +33,7 @@
#include <asm/io.h>
#include <asm/uaccess.h>
-MODULE_AUTHOR("Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>");
+MODULE_AUTHOR("Yoichi Yuasa <yuasa@linux-mips.org>");
MODULE_DESCRIPTION("NEC VR4100 series RTC driver");
MODULE_LICENSE("GPL v2");
diff --git a/drivers/s390/block/dasd_eckd.c b/drivers/s390/block/dasd_eckd.c
index f8b1f04..c11770f 100644
--- a/drivers/s390/block/dasd_eckd.c
+++ b/drivers/s390/block/dasd_eckd.c
@@ -1696,8 +1696,7 @@
DBF_DEV_EVENT(DBF_ERR, device, "%s",
"unsolicited interrupt received "
"(sense available)");
- device->discipline->dump_sense_dbf(device, NULL, irb,
- "unsolicited");
+ device->discipline->dump_sense_dbf(device, irb, "unsolicited");
}
dasd_schedule_device_bh(device);
@@ -2941,42 +2940,20 @@
}
static void
-dasd_eckd_dump_sense_dbf(struct dasd_device *device, struct dasd_ccw_req *req,
- struct irb *irb, char *reason)
+dasd_eckd_dump_sense_dbf(struct dasd_device *device, struct irb *irb,
+ char *reason)
{
u64 *sense;
- int sl;
- struct tsb *tsb;
- sense = NULL;
- tsb = NULL;
- if (req && scsw_is_tm(&req->irb.scsw)) {
- if (irb->scsw.tm.tcw)
- tsb = tcw_get_tsb(
- (struct tcw *)(unsigned long)irb->scsw.tm.tcw);
- if (tsb && (irb->scsw.tm.fcxs == 0x01)) {
- switch (tsb->flags & 0x07) {
- case 1: /* tsa_iostat */
- sense = (u64 *)tsb->tsa.iostat.sense;
- break;
- case 2: /* ts_ddpc */
- sense = (u64 *)tsb->tsa.ddpc.sense;
- break;
- case 3: /* tsa_intrg */
- break;
- }
- }
- } else {
- if (irb->esw.esw0.erw.cons)
- sense = (u64 *)irb->ecw;
- }
+ sense = (u64 *) dasd_get_sense(irb);
if (sense) {
- for (sl = 0; sl < 4; sl++) {
- DBF_DEV_EVENT(DBF_EMERG, device,
- "%s: %016llx %016llx %016llx %016llx",
- reason, sense[0], sense[1], sense[2],
- sense[3]);
- }
+ DBF_DEV_EVENT(DBF_EMERG, device,
+ "%s: %s %02x%02x%02x %016llx %016llx %016llx "
+ "%016llx", reason,
+ scsw_is_tm(&irb->scsw) ? "t" : "c",
+ scsw_cc(&irb->scsw), scsw_cstat(&irb->scsw),
+ scsw_dstat(&irb->scsw), sense[0], sense[1],
+ sense[2], sense[3]);
} else {
DBF_DEV_EVENT(DBF_EMERG, device, "%s",
"SORRY - NO VALID SENSE AVAILABLE\n");
diff --git a/drivers/s390/block/dasd_erp.c b/drivers/s390/block/dasd_erp.c
index d970ce2..cb8f9ce 100644
--- a/drivers/s390/block/dasd_erp.c
+++ b/drivers/s390/block/dasd_erp.c
@@ -172,7 +172,7 @@
device = cqr->startdev;
/* dump sense data to s390 debugfeature*/
if (device->discipline && device->discipline->dump_sense_dbf)
- device->discipline->dump_sense_dbf(device, cqr, irb, "log");
+ device->discipline->dump_sense_dbf(device, irb, "log");
}
EXPORT_SYMBOL(dasd_log_sense_dbf);
diff --git a/drivers/s390/block/dasd_fba.c b/drivers/s390/block/dasd_fba.c
index e21ee73..31849ad 100644
--- a/drivers/s390/block/dasd_fba.c
+++ b/drivers/s390/block/dasd_fba.c
@@ -241,7 +241,7 @@
/* check for unsolicited interrupts */
DBF_DEV_EVENT(DBF_WARNING, device, "%s",
"unsolicited interrupt received");
- device->discipline->dump_sense_dbf(device, NULL, irb, "unsolicited");
+ device->discipline->dump_sense_dbf(device, irb, "unsolicited");
dasd_schedule_device_bh(device);
return;
};
@@ -444,17 +444,20 @@
}
static void
-dasd_fba_dump_sense_dbf(struct dasd_device *device, struct dasd_ccw_req *req,
- struct irb *irb, char *reason)
+dasd_fba_dump_sense_dbf(struct dasd_device *device, struct irb *irb,
+ char *reason)
{
- int sl;
- if (irb->esw.esw0.erw.cons) {
- for (sl = 0; sl < 4; sl++) {
- DBF_DEV_EVENT(DBF_EMERG, device,
- "%s: %08x %08x %08x %08x",
- reason, irb->ecw[8 * 0], irb->ecw[8 * 1],
- irb->ecw[8 * 2], irb->ecw[8 * 3]);
- }
+ u64 *sense;
+
+ sense = (u64 *) dasd_get_sense(irb);
+ if (sense) {
+ DBF_DEV_EVENT(DBF_EMERG, device,
+ "%s: %s %02x%02x%02x %016llx %016llx %016llx "
+ "%016llx", reason,
+ scsw_is_tm(&irb->scsw) ? "t" : "c",
+ scsw_cc(&irb->scsw), scsw_cstat(&irb->scsw),
+ scsw_dstat(&irb->scsw), sense[0], sense[1],
+ sense[2], sense[3]);
} else {
DBF_DEV_EVENT(DBF_EMERG, device, "%s",
"SORRY - NO VALID SENSE AVAILABLE\n");
diff --git a/drivers/s390/block/dasd_int.h b/drivers/s390/block/dasd_int.h
index fd63b2f..b699ca3 100644
--- a/drivers/s390/block/dasd_int.h
+++ b/drivers/s390/block/dasd_int.h
@@ -284,8 +284,7 @@
dasd_erp_fn_t(*erp_postaction) (struct dasd_ccw_req *);
void (*dump_sense) (struct dasd_device *, struct dasd_ccw_req *,
struct irb *);
- void (*dump_sense_dbf) (struct dasd_device *, struct dasd_ccw_req *,
- struct irb *, char *);
+ void (*dump_sense_dbf) (struct dasd_device *, struct irb *, char *);
void (*handle_unsolicited_interrupt) (struct dasd_device *,
struct irb *);
diff --git a/drivers/s390/block/dasd_ioctl.c b/drivers/s390/block/dasd_ioctl.c
index 4ce3f72..df918ef 100644
--- a/drivers/s390/block/dasd_ioctl.c
+++ b/drivers/s390/block/dasd_ioctl.c
@@ -16,6 +16,7 @@
#include <linux/major.h>
#include <linux/fs.h>
#include <linux/blkpg.h>
+#include <linux/smp_lock.h>
#include <asm/ccwdev.h>
#include <asm/cmb.h>
diff --git a/drivers/s390/block/dcssblk.c b/drivers/s390/block/dcssblk.c
index 016f9e9..d346176 100644
--- a/drivers/s390/block/dcssblk.c
+++ b/drivers/s390/block/dcssblk.c
@@ -964,7 +964,8 @@
break;
}
if (rc)
- pr_err("Suspend failed because device %s is writeable.\n",
+ pr_err("Suspending the system failed because DCSS device %s "
+ "is writable\n",
dev_info->segment_name);
return rc;
}
@@ -987,8 +988,8 @@
goto out_panic;
}
if (start != entry->start || end != entry->end) {
- pr_err("Mismatch of start / end address after "
- "resuming device %s\n",
+ pr_err("The address range of DCSS %s changed "
+ "while the system was suspended\n",
entry->segment_name);
goto out_panic;
}
diff --git a/drivers/s390/block/xpram.c b/drivers/s390/block/xpram.c
index 2e9e1ec..db442cd 100644
--- a/drivers/s390/block/xpram.c
+++ b/drivers/s390/block/xpram.c
@@ -443,7 +443,7 @@
*/
static void xpram_resume_error(const char *message)
{
- pr_err("Resume error: %s\n", message);
+ pr_err("Resuming the system failed: %s\n", message);
panic("xpram resume error\n");
}
diff --git a/drivers/s390/char/monreader.c b/drivers/s390/char/monreader.c
index 7892550..3234e90 100644
--- a/drivers/s390/char/monreader.c
+++ b/drivers/s390/char/monreader.c
@@ -320,7 +320,7 @@
goto out_path;
}
filp->private_data = monpriv;
- dev_set_drvdata(&monreader_device, monpriv);
+ dev_set_drvdata(monreader_device, monpriv);
unlock_kernel();
return nonseekable_open(inode, filp);
@@ -463,7 +463,7 @@
*****************************************************************************/
static int monreader_freeze(struct device *dev)
{
- struct mon_private *monpriv = dev_get_drvdata(&dev);
+ struct mon_private *monpriv = dev_get_drvdata(dev);
int rc;
if (!monpriv)
diff --git a/drivers/s390/char/sclp_rw.h b/drivers/s390/char/sclp_rw.h
index 85f491e..7a7bfc9 100644
--- a/drivers/s390/char/sclp_rw.h
+++ b/drivers/s390/char/sclp_rw.h
@@ -92,5 +92,10 @@
void sclp_set_htab(struct sclp_buffer *, unsigned short);
int sclp_chars_in_buffer(struct sclp_buffer *);
+#ifdef CONFIG_SCLP_CONSOLE
void sclp_console_pm_event(enum sclp_pm_event sclp_pm_event);
+#else
+static inline void sclp_console_pm_event(enum sclp_pm_event sclp_pm_event) { }
+#endif
+
#endif /* __SCLP_RW_H__ */
diff --git a/drivers/s390/char/vmwatchdog.c b/drivers/s390/char/vmwatchdog.c
index cb7854c..f2bc287 100644
--- a/drivers/s390/char/vmwatchdog.c
+++ b/drivers/s390/char/vmwatchdog.c
@@ -250,14 +250,14 @@
static int vmwdt_suspend(void)
{
if (test_and_set_bit(VMWDT_OPEN, &vmwdt_is_open)) {
- pr_err("The watchdog is in use. "
- "This prevents hibernation or suspend.\n");
+ pr_err("The system cannot be suspended while the watchdog"
+ " is in use\n");
return NOTIFY_BAD;
}
if (test_bit(VMWDT_RUNNING, &vmwdt_is_open)) {
clear_bit(VMWDT_OPEN, &vmwdt_is_open);
- pr_err("The watchdog is running. "
- "This prevents hibernation or suspend.\n");
+ pr_err("The system cannot be suspended while the watchdog"
+ " is running\n");
return NOTIFY_BAD;
}
return NOTIFY_DONE;
diff --git a/drivers/scsi/atari_NCR5380.c b/drivers/scsi/atari_NCR5380.c
index 0471f88..4240b05 100644
--- a/drivers/scsi/atari_NCR5380.c
+++ b/drivers/scsi/atari_NCR5380.c
@@ -2826,8 +2826,7 @@
*/
local_irq_restore(flags);
- printk(KERN_INFO "scsi%d: warning : SCSI command probably completed successfully\n"
- KERN_INFO " before abortion\n", HOSTNO);
+ printk(KERN_INFO "scsi%d: warning : SCSI command probably completed successfully before abortion\n", HOSTNO);
/* Maybe it is sufficient just to release the ST-DMA lock... (if
* possible at all) At least, we should check if the lock could be
diff --git a/drivers/scsi/cxgb3i/Kbuild b/drivers/scsi/cxgb3i/Kbuild
index 25a2032..70d060b 100644
--- a/drivers/scsi/cxgb3i/Kbuild
+++ b/drivers/scsi/cxgb3i/Kbuild
@@ -1,4 +1,4 @@
-EXTRA_CFLAGS += -I$(TOPDIR)/drivers/net/cxgb3
+EXTRA_CFLAGS += -I$(srctree)/drivers/net/cxgb3
cxgb3i-y := cxgb3i_init.o cxgb3i_iscsi.o cxgb3i_pdu.o cxgb3i_offload.o cxgb3i_ddp.o
obj-$(CONFIG_SCSI_CXGB3_ISCSI) += cxgb3i.o
diff --git a/drivers/scsi/cxgb3i/cxgb3i_iscsi.c b/drivers/scsi/cxgb3i/cxgb3i_iscsi.c
index 74369a3..c399f48 100644
--- a/drivers/scsi/cxgb3i/cxgb3i_iscsi.c
+++ b/drivers/scsi/cxgb3i/cxgb3i_iscsi.c
@@ -13,6 +13,7 @@
#include <linux/inet.h>
#include <linux/crypto.h>
+#include <linux/if_vlan.h>
#include <net/dst.h>
#include <net/tcp.h>
#include <scsi/scsi_cmnd.h>
@@ -184,6 +185,9 @@
struct cxgb3i_adapter *snic;
int i;
+ if (ndev->priv_flags & IFF_802_1Q_VLAN)
+ ndev = vlan_dev_real_dev(ndev);
+
read_lock(&cxgb3i_snic_rwlock);
list_for_each_entry(snic, &cxgb3i_snic_list, list_head) {
for (i = 0; i < snic->hba_cnt; i++) {
diff --git a/drivers/scsi/fnic/fnic_main.c b/drivers/scsi/fnic/fnic_main.c
index a840728..2c266c0 100644
--- a/drivers/scsi/fnic/fnic_main.c
+++ b/drivers/scsi/fnic/fnic_main.c
@@ -473,16 +473,16 @@
* limitation for the device. Try 40-bit first, and
* fail to 32-bit.
*/
- err = pci_set_dma_mask(pdev, DMA_40BIT_MASK);
+ err = pci_set_dma_mask(pdev, DMA_BIT_MASK(40));
if (err) {
- err = pci_set_dma_mask(pdev, DMA_32BIT_MASK);
+ err = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
if (err) {
shost_printk(KERN_ERR, fnic->lport->host,
"No usable DMA configuration "
"aborting\n");
goto err_out_release_regions;
}
- err = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK);
+ err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
if (err) {
shost_printk(KERN_ERR, fnic->lport->host,
"Unable to obtain 32-bit DMA "
@@ -490,7 +490,7 @@
goto err_out_release_regions;
}
} else {
- err = pci_set_consistent_dma_mask(pdev, DMA_40BIT_MASK);
+ err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(40));
if (err) {
shost_printk(KERN_ERR, fnic->lport->host,
"Unable to obtain 40-bit DMA "
diff --git a/drivers/scsi/fnic/fnic_scsi.c b/drivers/scsi/fnic/fnic_scsi.c
index eabf365..bfc9969 100644
--- a/drivers/scsi/fnic/fnic_scsi.c
+++ b/drivers/scsi/fnic/fnic_scsi.c
@@ -245,7 +245,7 @@
struct vnic_wq_copy *wq,
struct fnic_io_req *io_req,
struct scsi_cmnd *sc,
- u32 sg_count)
+ int sg_count)
{
struct scatterlist *sg;
struct fc_rport *rport = starget_to_rport(scsi_target(sc->device));
@@ -260,9 +260,6 @@
char msg[2];
if (sg_count) {
- BUG_ON(sg_count < 0);
- BUG_ON(sg_count > FNIC_MAX_SG_DESC_CNT);
-
/* For each SGE, create a device desc entry */
desc = io_req->sgl_list;
for_each_sg(scsi_sglist(sc), sg, sg_count, i) {
@@ -344,7 +341,7 @@
struct fnic *fnic;
struct vnic_wq_copy *wq;
int ret;
- u32 sg_count;
+ int sg_count;
unsigned long flags;
unsigned long ptr;
diff --git a/drivers/scsi/ibmvscsi/ibmvscsi.c b/drivers/scsi/ibmvscsi/ibmvscsi.c
index 869a11b..9928704 100644
--- a/drivers/scsi/ibmvscsi/ibmvscsi.c
+++ b/drivers/scsi/ibmvscsi/ibmvscsi.c
@@ -1095,9 +1095,14 @@
MAX_INDIRECT_BUFS);
hostdata->host->sg_tablesize = MAX_INDIRECT_BUFS;
}
+
+ if (hostdata->madapter_info.os_type == 3) {
+ enable_fast_fail(hostdata);
+ return;
+ }
}
- enable_fast_fail(hostdata);
+ send_srp_login(hostdata);
}
/**
diff --git a/drivers/scsi/mac53c94.c b/drivers/scsi/mac53c94.c
index b12ad7c7..18735b3 100644
--- a/drivers/scsi/mac53c94.c
+++ b/drivers/scsi/mac53c94.c
@@ -75,8 +75,9 @@
int i;
printk(KERN_DEBUG "mac53c94_queue %p: command is", cmd);
for (i = 0; i < cmd->cmd_len; ++i)
- printk(" %.2x", cmd->cmnd[i]);
- printk("\n" KERN_DEBUG "use_sg=%d request_bufflen=%d request_buffer=%p\n",
+ printk(KERN_CONT " %.2x", cmd->cmnd[i]);
+ printk(KERN_CONT "\n");
+ printk(KERN_DEBUG "use_sg=%d request_bufflen=%d request_buffer=%p\n",
scsi_sg_count(cmd), scsi_bufflen(cmd), scsi_sglist(cmd));
}
#endif
diff --git a/drivers/scsi/qla2xxx/qla_mid.c b/drivers/scsi/qla2xxx/qla_mid.c
index 650bcef..cd78c50 100644
--- a/drivers/scsi/qla2xxx/qla_mid.c
+++ b/drivers/scsi/qla2xxx/qla_mid.c
@@ -9,7 +9,6 @@
#include <linux/moduleparam.h>
#include <linux/vmalloc.h>
-#include <linux/smp_lock.h>
#include <linux/list.h>
#include <scsi/scsi_tcq.h>
diff --git a/drivers/scsi/scsi_transport_fc.c b/drivers/scsi/scsi_transport_fc.c
index 2eee9e6..292c02f 100644
--- a/drivers/scsi/scsi_transport_fc.c
+++ b/drivers/scsi/scsi_transport_fc.c
@@ -3670,13 +3670,14 @@
fc_bsg_goose_queue(struct fc_rport *rport)
{
int flagset;
+ unsigned long flags;
if (!rport->rqst_q)
return;
get_device(&rport->dev);
- spin_lock(rport->rqst_q->queue_lock);
+ spin_lock_irqsave(rport->rqst_q->queue_lock, flags);
flagset = test_bit(QUEUE_FLAG_REENTER, &rport->rqst_q->queue_flags) &&
!test_bit(QUEUE_FLAG_REENTER, &rport->rqst_q->queue_flags);
if (flagset)
@@ -3684,7 +3685,7 @@
__blk_run_queue(rport->rqst_q);
if (flagset)
queue_flag_clear(QUEUE_FLAG_REENTER, rport->rqst_q);
- spin_unlock(rport->rqst_q->queue_lock);
+ spin_unlock_irqrestore(rport->rqst_q->queue_lock, flags);
put_device(&rport->dev);
}
diff --git a/drivers/scsi/sg.c b/drivers/scsi/sg.c
index 8201387..9230402 100644
--- a/drivers/scsi/sg.c
+++ b/drivers/scsi/sg.c
@@ -210,13 +210,11 @@
static int sg_allow_access(struct file *filp, unsigned char *cmd)
{
struct sg_fd *sfp = (struct sg_fd *)filp->private_data;
- struct request_queue *q = sfp->parentdp->device->request_queue;
if (sfp->parentdp->device->type == TYPE_SCANNER)
return 0;
- return blk_verify_command(&q->cmd_filter,
- cmd, filp->f_mode & FMODE_WRITE);
+ return blk_verify_command(cmd, filp->f_mode & FMODE_WRITE);
}
static int
@@ -621,7 +619,7 @@
if (strcmp(current->comm, cmd) && printk_ratelimit()) {
printk(KERN_WARNING
"sg_write: data in/out %d/%d bytes for SCSI command 0x%x--"
- "guessing data in;\n" KERN_WARNING " "
+ "guessing data in;\n "
"program %s not setting count and/or reply_len properly\n",
old_hdr.reply_len - (int)SZ_SG_HEADER,
input_size, (unsigned int) cmnd[0],
@@ -1658,6 +1656,10 @@
md->nr_entries = req_schp->k_use_sg;
md->offset = 0;
md->null_mapped = hp->dxferp ? 0 : 1;
+ if (dxfer_dir == SG_DXFER_TO_FROM_DEV)
+ md->from_user = 1;
+ else
+ md->from_user = 0;
}
if (iov_count) {
diff --git a/drivers/scsi/sun3_NCR5380.c b/drivers/scsi/sun3_NCR5380.c
index bcaba86..75da6e5 100644
--- a/drivers/scsi/sun3_NCR5380.c
+++ b/drivers/scsi/sun3_NCR5380.c
@@ -2860,8 +2860,7 @@
*/
local_irq_restore(flags);
- printk(KERN_INFO "scsi%d: warning : SCSI command probably completed successfully\n"
- KERN_INFO " before abortion\n", HOSTNO);
+ printk(KERN_INFO "scsi%d: warning : SCSI command probably completed successfully before abortion\n", HOSTNO);
return SCSI_ABORT_NOT_RUNNING;
}
diff --git a/drivers/scsi/zalon.c b/drivers/scsi/zalon.c
index 97f3158..27e84e4 100644
--- a/drivers/scsi/zalon.c
+++ b/drivers/scsi/zalon.c
@@ -134,7 +134,7 @@
host = ncr_attach(&zalon7xx_template, unit, &device);
if (!host)
- goto fail;
+ return -ENODEV;
if (request_irq(dev->irq, ncr53c8xx_intr, IRQF_SHARED, "zalon", host)) {
dev_printk(KERN_ERR, &dev->dev, "irq problem with %d, detaching\n ",
diff --git a/drivers/serial/8250_pci.c b/drivers/serial/8250_pci.c
index a07015d..e7108e7 100644
--- a/drivers/serial/8250_pci.c
+++ b/drivers/serial/8250_pci.c
@@ -60,11 +60,12 @@
static void moan_device(const char *str, struct pci_dev *dev)
{
- printk(KERN_WARNING "%s: %s\n"
- KERN_WARNING "Please send the output of lspci -vv, this\n"
- KERN_WARNING "message (0x%04x,0x%04x,0x%04x,0x%04x), the\n"
- KERN_WARNING "manufacturer and name of serial board or\n"
- KERN_WARNING "modem board to rmk+serial@arm.linux.org.uk.\n",
+ printk(KERN_WARNING
+ "%s: %s\n"
+ "Please send the output of lspci -vv, this\n"
+ "message (0x%04x,0x%04x,0x%04x,0x%04x), the\n"
+ "manufacturer and name of serial board or\n"
+ "modem board to rmk+serial@arm.linux.org.uk.\n",
pci_name(dev), str, dev->vendor, dev->device,
dev->subsystem_vendor, dev->subsystem_device);
}
@@ -759,6 +760,8 @@
/* subdevice 0x00PS means <P> parallel, <S> serial */
unsigned int num_serial = dev->subsystem_device & 0xf;
+ if (dev->device == PCI_DEVICE_ID_NETMOS_9901)
+ return 0;
if (dev->subsystem_vendor == PCI_VENDOR_ID_IBM &&
dev->subsystem_device == 0x0299)
return 0;
@@ -3557,6 +3560,10 @@
PCI_VENDOR_ID_IBM, 0x0299,
0, 0, pbn_b0_bt_2_115200 },
+ { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9901,
+ 0xA000, 0x1000,
+ 0, 0, pbn_b0_1_115200 },
+
/*
* These entries match devices with class COMMUNICATION_SERIAL,
* COMMUNICATION_MODEM or COMMUNICATION_MULTISERIAL
diff --git a/drivers/serial/sh-sci.c b/drivers/serial/sh-sci.c
index 66f5267..8e2feb5 100644
--- a/drivers/serial/sh-sci.c
+++ b/drivers/serial/sh-sci.c
@@ -707,24 +707,25 @@
static irqreturn_t sci_mpxed_interrupt(int irq, void *ptr)
{
- unsigned short ssr_status, scr_status;
+ unsigned short ssr_status, scr_status, err_enabled;
struct uart_port *port = ptr;
irqreturn_t ret = IRQ_NONE;
ssr_status = sci_in(port, SCxSR);
scr_status = sci_in(port, SCSCR);
+ err_enabled = scr_status & (SCI_CTRL_FLAGS_REIE | SCI_CTRL_FLAGS_RIE);
/* Tx Interrupt */
- if ((ssr_status & 0x0020) && (scr_status & SCI_CTRL_FLAGS_TIE))
+ if ((ssr_status & SCxSR_TDxE(port)) && (scr_status & SCI_CTRL_FLAGS_TIE))
ret = sci_tx_interrupt(irq, ptr);
/* Rx Interrupt */
- if ((ssr_status & 0x0002) && (scr_status & SCI_CTRL_FLAGS_RIE))
+ if ((ssr_status & SCxSR_RDxF(port)) && (scr_status & SCI_CTRL_FLAGS_RIE))
ret = sci_rx_interrupt(irq, ptr);
/* Error Interrupt */
- if ((ssr_status & 0x0080) && (scr_status & SCI_CTRL_FLAGS_REIE))
+ if ((ssr_status & SCxSR_ERRORS(port)) && err_enabled)
ret = sci_er_interrupt(irq, ptr);
/* Break Interrupt */
- if ((ssr_status & 0x0010) && (scr_status & SCI_CTRL_FLAGS_REIE))
+ if ((ssr_status & SCxSR_BRK(port)) && err_enabled)
ret = sci_br_interrupt(irq, ptr);
return ret;
diff --git a/drivers/serial/vr41xx_siu.c b/drivers/serial/vr41xx_siu.c
index 0573f3b..dac550e 100644
--- a/drivers/serial/vr41xx_siu.c
+++ b/drivers/serial/vr41xx_siu.c
@@ -1,7 +1,7 @@
/*
* Driver for NEC VR4100 series Serial Interface Unit.
*
- * Copyright (C) 2004-2008 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ * Copyright (C) 2004-2008 Yoichi Yuasa <yuasa@linux-mips.org>
*
* Based on drivers/serial/8250.c, by Russell King.
*
diff --git a/drivers/spi/omap_uwire.c b/drivers/spi/omap_uwire.c
index aa90ddb..8980a56 100644
--- a/drivers/spi/omap_uwire.c
+++ b/drivers/spi/omap_uwire.c
@@ -514,6 +514,8 @@
/* the spi->mode bits understood by this driver: */
master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH;
+ master->flags = SPI_MASTER_HALF_DUPLEX;
+
master->bus_num = 2; /* "official" */
master->num_chipselect = 4;
master->setup = uwire_setup;
diff --git a/drivers/spi/spi_bitbang.c b/drivers/spi/spi_bitbang.c
index 2a5abc0..f1db395 100644
--- a/drivers/spi/spi_bitbang.c
+++ b/drivers/spi/spi_bitbang.c
@@ -258,6 +258,11 @@
struct spi_bitbang *bitbang =
container_of(work, struct spi_bitbang, work);
unsigned long flags;
+ int do_setup = -1;
+ int (*setup_transfer)(struct spi_device *,
+ struct spi_transfer *);
+
+ setup_transfer = bitbang->setup_transfer;
spin_lock_irqsave(&bitbang->lock, flags);
bitbang->busy = 1;
@@ -269,8 +274,6 @@
unsigned tmp;
unsigned cs_change;
int status;
- int (*setup_transfer)(struct spi_device *,
- struct spi_transfer *);
m = container_of(bitbang->queue.next, struct spi_message,
queue);
@@ -287,19 +290,19 @@
tmp = 0;
cs_change = 1;
status = 0;
- setup_transfer = NULL;
list_for_each_entry (t, &m->transfers, transfer_list) {
- /* override or restore speed and wordsize */
- if (t->speed_hz || t->bits_per_word) {
- setup_transfer = bitbang->setup_transfer;
+ /* override speed or wordsize? */
+ if (t->speed_hz || t->bits_per_word)
+ do_setup = 1;
+
+ /* init (-1) or override (1) transfer params */
+ if (do_setup != 0) {
if (!setup_transfer) {
status = -ENOPROTOOPT;
break;
}
- }
- if (setup_transfer) {
status = setup_transfer(spi, t);
if (status < 0)
break;
@@ -363,9 +366,10 @@
m->status = status;
m->complete(m->context);
- /* restore speed and wordsize */
- if (setup_transfer)
+ /* restore speed and wordsize if it was overridden */
+ if (do_setup == 1)
setup_transfer(spi, NULL);
+ do_setup = 0;
/* normally deactivate chipselect ... unless no error and
* cs_change has hinted that the next message will probably
diff --git a/drivers/spi/spidev.c b/drivers/spi/spidev.c
index 5d869c4..606e7a4 100644
--- a/drivers/spi/spidev.c
+++ b/drivers/spi/spidev.c
@@ -58,15 +58,20 @@
/* Bit masks for spi_device.mode management. Note that incorrect
- * settings for CS_HIGH and 3WIRE can cause *lots* of trouble for other
- * devices on a shared bus: CS_HIGH, because this device will be
- * active when it shouldn't be; 3WIRE, because when active it won't
- * behave as it should.
+ * settings for some settings can cause *lots* of trouble for other
+ * devices on a shared bus:
*
- * REVISIT should changing those two modes be privileged?
+ * - CS_HIGH ... this device will be active when it shouldn't be
+ * - 3WIRE ... when active, it won't behave as it should
+ * - NO_CS ... there will be no explicit message boundaries; this
+ * is completely incompatible with the shared bus model
+ * - READY ... transfers may proceed when they shouldn't.
+ *
+ * REVISIT should changing those flags be privileged?
*/
#define SPI_MODE_MASK (SPI_CPHA | SPI_CPOL | SPI_CS_HIGH \
- | SPI_LSB_FIRST | SPI_3WIRE | SPI_LOOP)
+ | SPI_LSB_FIRST | SPI_3WIRE | SPI_LOOP \
+ | SPI_NO_CS | SPI_READY)
struct spidev_data {
dev_t devt;
diff --git a/drivers/ssb/driver_mipscore.c b/drivers/ssb/driver_mipscore.c
index 3fd3e3b..3c6feed 100644
--- a/drivers/ssb/driver_mipscore.c
+++ b/drivers/ssb/driver_mipscore.c
@@ -49,29 +49,54 @@
static inline u32 ssb_irqflag(struct ssb_device *dev)
{
- return ssb_read32(dev, SSB_TPSFLAG) & SSB_TPSFLAG_BPFLAG;
+ u32 tpsflag = ssb_read32(dev, SSB_TPSFLAG);
+ if (tpsflag)
+ return ssb_read32(dev, SSB_TPSFLAG) & SSB_TPSFLAG_BPFLAG;
+ else
+ /* not irq supported */
+ return 0x3f;
+}
+
+static struct ssb_device *find_device(struct ssb_device *rdev, int irqflag)
+{
+ struct ssb_bus *bus = rdev->bus;
+ int i;
+ for (i = 0; i < bus->nr_devices; i++) {
+ struct ssb_device *dev;
+ dev = &(bus->devices[i]);
+ if (ssb_irqflag(dev) == irqflag)
+ return dev;
+ }
+ return NULL;
}
/* Get the MIPS IRQ assignment for a specified device.
* If unassigned, 0 is returned.
+ * If disabled, 5 is returned.
+ * If not supported, 6 is returned.
*/
unsigned int ssb_mips_irq(struct ssb_device *dev)
{
struct ssb_bus *bus = dev->bus;
+ struct ssb_device *mdev = bus->mipscore.dev;
u32 irqflag;
u32 ipsflag;
u32 tmp;
unsigned int irq;
irqflag = ssb_irqflag(dev);
+ if (irqflag == 0x3f)
+ return 6;
ipsflag = ssb_read32(bus->mipscore.dev, SSB_IPSFLAG);
for (irq = 1; irq <= 4; irq++) {
tmp = ((ipsflag & ipsflag_irq_mask[irq]) >> ipsflag_irq_shift[irq]);
if (tmp == irqflag)
break;
}
- if (irq == 5)
- irq = 0;
+ if (irq == 5) {
+ if ((1 << irqflag) & ssb_read32(mdev, SSB_INTVEC))
+ irq = 0;
+ }
return irq;
}
@@ -97,25 +122,56 @@
struct ssb_device *mdev = bus->mipscore.dev;
u32 irqflag = ssb_irqflag(dev);
+ BUG_ON(oldirq == 6);
+
dev->irq = irq + 2;
- ssb_dprintk(KERN_INFO PFX
- "set_irq: core 0x%04x, irq %d => %d\n",
- dev->id.coreid, oldirq, irq);
/* clear the old irq */
if (oldirq == 0)
ssb_write32(mdev, SSB_INTVEC, (~(1 << irqflag) & ssb_read32(mdev, SSB_INTVEC)));
- else
+ else if (oldirq != 5)
clear_irq(bus, oldirq);
/* assign the new one */
if (irq == 0) {
ssb_write32(mdev, SSB_INTVEC, ((1 << irqflag) | ssb_read32(mdev, SSB_INTVEC)));
} else {
+ u32 ipsflag = ssb_read32(mdev, SSB_IPSFLAG);
+ if ((ipsflag & ipsflag_irq_mask[irq]) != ipsflag_irq_mask[irq]) {
+ u32 oldipsflag = (ipsflag & ipsflag_irq_mask[irq]) >> ipsflag_irq_shift[irq];
+ struct ssb_device *olddev = find_device(dev, oldipsflag);
+ if (olddev)
+ set_irq(olddev, 0);
+ }
irqflag <<= ipsflag_irq_shift[irq];
- irqflag |= (ssb_read32(mdev, SSB_IPSFLAG) & ~ipsflag_irq_mask[irq]);
+ irqflag |= (ipsflag & ~ipsflag_irq_mask[irq]);
ssb_write32(mdev, SSB_IPSFLAG, irqflag);
}
+ ssb_dprintk(KERN_INFO PFX
+ "set_irq: core 0x%04x, irq %d => %d\n",
+ dev->id.coreid, oldirq+2, irq+2);
+}
+
+static void print_irq(struct ssb_device *dev, unsigned int irq)
+{
+ int i;
+ static const char *irq_name[] = {"2(S)", "3", "4", "5", "6", "D", "I"};
+ ssb_dprintk(KERN_INFO PFX
+ "core 0x%04x, irq :", dev->id.coreid);
+ for (i = 0; i <= 6; i++) {
+ ssb_dprintk(" %s%s", irq_name[i], i==irq?"*":" ");
+ }
+ ssb_dprintk("\n");
+}
+
+static void dump_irq(struct ssb_bus *bus)
+{
+ int i;
+ for (i = 0; i < bus->nr_devices; i++) {
+ struct ssb_device *dev;
+ dev = &(bus->devices[i]);
+ print_irq(dev, ssb_mips_irq(dev));
+ }
}
static void ssb_mips_serial_init(struct ssb_mipscore *mcore)
@@ -197,16 +253,23 @@
/* Assign IRQs to all cores on the bus, start with irq line 2, because serial usually takes 1 */
for (irq = 2, i = 0; i < bus->nr_devices; i++) {
+ int mips_irq;
dev = &(bus->devices[i]);
- dev->irq = ssb_mips_irq(dev) + 2;
+ mips_irq = ssb_mips_irq(dev);
+ if (mips_irq > 4)
+ dev->irq = 0;
+ else
+ dev->irq = mips_irq + 2;
+ if (dev->irq > 5)
+ continue;
switch (dev->id.coreid) {
case SSB_DEV_USB11_HOST:
/* shouldn't need a separate irq line for non-4710, most of them have a proper
* external usb controller on the pci */
if ((bus->chip_id == 0x4710) && (irq <= 4)) {
set_irq(dev, irq++);
- break;
}
+ break;
/* fallthrough */
case SSB_DEV_PCI:
case SSB_DEV_ETHERNET:
@@ -220,6 +283,8 @@
}
}
}
+ ssb_dprintk(KERN_INFO PFX "after irq reconfiguration\n");
+ dump_irq(bus);
ssb_mips_serial_init(mcore);
ssb_mips_flash_detect(mcore);
diff --git a/drivers/ssb/pcmcia.c b/drivers/ssb/pcmcia.c
index fbfadba..100e7a5 100644
--- a/drivers/ssb/pcmcia.c
+++ b/drivers/ssb/pcmcia.c
@@ -583,7 +583,7 @@
ssb_printk(".");
err = ssb_pcmcia_sprom_write(bus, i, sprom[i]);
if (err) {
- ssb_printk("\n" KERN_NOTICE PFX
+ ssb_printk(KERN_NOTICE PFX
"Failed to write to SPROM.\n");
failed = 1;
break;
@@ -591,7 +591,7 @@
}
err = ssb_pcmcia_sprom_command(bus, SSB_PCMCIA_SPROMCTL_WRITEDIS);
if (err) {
- ssb_printk("\n" KERN_NOTICE PFX
+ ssb_printk(KERN_NOTICE PFX
"Could not disable SPROM write access.\n");
failed = 1;
}
@@ -678,7 +678,8 @@
sprom->board_rev = tuple.TupleData[1];
break;
case SSB_PCMCIA_CIS_PA:
- GOTO_ERROR_ON(tuple.TupleDataLen != 9,
+ GOTO_ERROR_ON((tuple.TupleDataLen != 9) &&
+ (tuple.TupleDataLen != 10),
"pa tpl size");
sprom->pa0b0 = tuple.TupleData[1] |
((u16)tuple.TupleData[2] << 8);
@@ -718,7 +719,8 @@
sprom->antenna_gain.ghz5.a3 = tuple.TupleData[1];
break;
case SSB_PCMCIA_CIS_BFLAGS:
- GOTO_ERROR_ON(tuple.TupleDataLen != 3,
+ GOTO_ERROR_ON((tuple.TupleDataLen != 3) &&
+ (tuple.TupleDataLen != 5),
"bfl tpl size");
sprom->boardflags_lo = tuple.TupleData[1] |
((u16)tuple.TupleData[2] << 8);
diff --git a/drivers/staging/comedi/drivers/jr3_pci.c b/drivers/staging/comedi/drivers/jr3_pci.c
index baf83c6..e3c3adc 100644
--- a/drivers/staging/comedi/drivers/jr3_pci.c
+++ b/drivers/staging/comedi/drivers/jr3_pci.c
@@ -45,6 +45,8 @@
#include <linux/delay.h>
#include <linux/ctype.h>
#include <linux/firmware.h>
+#include <linux/jiffies.h>
+#include <linux/timer.h>
#include "comedi_pci.h"
#include "jr3_pci.h"
diff --git a/drivers/staging/comedi/drivers/s626.c b/drivers/staging/comedi/drivers/s626.c
index 92121cf..5d9bab3 100644
--- a/drivers/staging/comedi/drivers/s626.c
+++ b/drivers/staging/comedi/drivers/s626.c
@@ -111,9 +111,13 @@
#define PCI_VENDOR_ID_S626 0x1131
#define PCI_DEVICE_ID_S626 0x7146
+/*
+ * For devices with vendor:device id == 0x1131:0x7146 you must specify
+ * also subvendor:subdevice ids, because otherwise it will conflict with
+ * Philips SAA7146 media/dvb based cards.
+ */
static DEFINE_PCI_DEVICE_TABLE(s626_pci_table) = {
- {PCI_VENDOR_ID_S626, PCI_DEVICE_ID_S626, PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- 0},
+ {PCI_VENDOR_ID_S626, PCI_DEVICE_ID_S626, 0x6000, 0x0272, 0, 0, 0},
{0}
};
@@ -499,25 +503,26 @@
resource_size_t resourceStart;
dma_addr_t appdma;
struct comedi_subdevice *s;
- struct pci_dev *pdev;
+ const struct pci_device_id *ids;
+ struct pci_dev *pdev = NULL;
if (alloc_private(dev, sizeof(struct s626_private)) < 0)
return -ENOMEM;
- for (pdev = pci_get_device(PCI_VENDOR_ID_S626, PCI_DEVICE_ID_S626,
- NULL); pdev != NULL;
- pdev = pci_get_device(PCI_VENDOR_ID_S626,
- PCI_DEVICE_ID_S626, pdev)) {
- if (it->options[0] || it->options[1]) {
- if (pdev->bus->number == it->options[0] &&
- PCI_SLOT(pdev->devfn) == it->options[1]) {
+ for (i = 0; i < (ARRAY_SIZE(s626_pci_table) - 1) && !pdev; i++) {
+ ids = &s626_pci_table[i];
+ do {
+ pdev = pci_get_subsys(ids->vendor, ids->device, ids->subvendor,
+ ids->subdevice, pdev);
+
+ if ((it->options[0] || it->options[1]) && pdev) {
/* matches requested bus/slot */
+ if (pdev->bus->number == it->options[0] &&
+ PCI_SLOT(pdev->devfn) == it->options[1])
+ break;
+ } else
break;
- }
- } else {
- /* no bus/slot specified */
- break;
- }
+ } while (1);
}
devpriv->pdev = pdev;
diff --git a/drivers/staging/go7007/s2250-loader.c b/drivers/staging/go7007/s2250-loader.c
index a5e4aca..bb22347 100644
--- a/drivers/staging/go7007/s2250-loader.c
+++ b/drivers/staging/go7007/s2250-loader.c
@@ -17,6 +17,7 @@
#include <linux/module.h>
#include <linux/init.h>
+#include <linux/smp_lock.h>
#include <linux/usb.h>
#include <dvb-usb.h>
diff --git a/drivers/staging/meilhaus/TODO b/drivers/staging/meilhaus/TODO
index 6ec2520..d6ce398 100644
--- a/drivers/staging/meilhaus/TODO
+++ b/drivers/staging/meilhaus/TODO
@@ -7,4 +7,4 @@
- possible comedi merge
Please send cleanup patches to Greg Kroah-Hartman <greg@kroah.com>
-and CC: David Kiliani <mail@davidkiliani.de>
+and CC: David Kiliani <mail@davidkiliani.de> and Meilhaus Support <support@meilhaus.de>
diff --git a/drivers/staging/rspiusb/rspiusb.c b/drivers/staging/rspiusb/rspiusb.c
index 1cdfe69..2f8155c 100644
--- a/drivers/staging/rspiusb/rspiusb.c
+++ b/drivers/staging/rspiusb/rspiusb.c
@@ -444,8 +444,7 @@
__func__, status);
pdx->pendingWrite = 0;
- usb_buffer_free(urb->dev, urb->transfer_buffer_length,
- urb->transfer_buffer, urb->transfer_dma);
+ kfree(urb->transfer_buffer);
}
int piusb_output(struct ioctl_struct *io, unsigned char *uBuf, int len,
@@ -457,9 +456,7 @@
urb = usb_alloc_urb(0, GFP_KERNEL);
if (urb != NULL) {
- kbuf =
- usb_buffer_alloc(pdx->udev, len, GFP_KERNEL,
- &urb->transfer_dma);
+ kbuf = kmalloc(len, GFP_KERNEL);
if (!kbuf) {
dev_err(&pdx->udev->dev, "buffer_alloc failed\n");
return -ENOMEM;
@@ -470,7 +467,6 @@
}
usb_fill_bulk_urb(urb, pdx->udev, pdx->hEP[io->endpoint], kbuf,
len, piusb_write_bulk_callback, pdx);
- urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
err = usb_submit_urb(urb, GFP_KERNEL);
if (err) {
dev_err(&pdx->udev->dev,
@@ -641,7 +637,7 @@
numPagesRequired =
((uaddr & ~PAGE_MASK) + count + ~PAGE_MASK) >> PAGE_SHIFT;
dbg("Number of pages needed = %d", numPagesRequired);
- maplist_p = vmalloc(numPagesRequired * sizeof(struct page));
+ maplist_p = vmalloc(numPagesRequired * sizeof(struct page *));
if (!maplist_p) {
dbg("Can't Allocate Memory for maplist_p");
return -ENOMEM;
@@ -712,9 +708,7 @@
usb_fill_bulk_urb(pdx->PixelUrb[frameInfo][i],
pdx->udev,
epAddr,
- (dma_addr_t *) sg_dma_address(&pdx->
- sgl[frameInfo]
- [i]),
+ NULL, // non-DMA HC? buy a better hardware
sg_dma_len(&pdx->sgl[frameInfo][i]),
piusb_readPIXEL_callback, (void *)pdx);
pdx->PixelUrb[frameInfo][i]->transfer_dma =
diff --git a/drivers/staging/rt2870/rt2870.h b/drivers/staging/rt2870/rt2870.h
index 5e5b3f2..29e3b53 100644
--- a/drivers/staging/rt2870/rt2870.h
+++ b/drivers/staging/rt2870/rt2870.h
@@ -89,6 +89,7 @@
{USB_DEVICE(0x0DF6,0x002C)}, /* Sitecom */ \
{USB_DEVICE(0x0DF6,0x002D)}, /* Sitecom */ \
{USB_DEVICE(0x0DF6,0x0039)}, /* Sitecom */ \
+ {USB_DEVICE(0x0DF6,0x003F)}, /* Sitecom WL-608 */ \
{USB_DEVICE(0x14B2,0x3C06)}, /* Conceptronic */ \
{USB_DEVICE(0x14B2,0x3C28)}, /* Conceptronic */ \
{USB_DEVICE(0x2019,0xED06)}, /* Planex Communications, Inc. */ \
diff --git a/drivers/staging/rtl8187se/ieee80211/ieee80211_softmac_wx.c b/drivers/staging/rtl8187se/ieee80211/ieee80211_softmac_wx.c
index 93af37e..54b4b71 100644
--- a/drivers/staging/rtl8187se/ieee80211/ieee80211_softmac_wx.c
+++ b/drivers/staging/rtl8187se/ieee80211/ieee80211_softmac_wx.c
@@ -461,19 +461,19 @@
struct iw_request_info *info,
union iwreq_data *wrqu, char *extra)
{
- strcpy(wrqu->name, "802.11");
+ strlcpy(wrqu->name, "802.11", IFNAMSIZ);
if(ieee->modulation & IEEE80211_CCK_MODULATION){
- strcat(wrqu->name, "b");
+ strlcat(wrqu->name, "b", IFNAMSIZ);
if(ieee->modulation & IEEE80211_OFDM_MODULATION)
- strcat(wrqu->name, "/g");
+ strlcat(wrqu->name, "/g", IFNAMSIZ);
}else if(ieee->modulation & IEEE80211_OFDM_MODULATION)
- strcat(wrqu->name, "g");
+ strlcat(wrqu->name, "g", IFNAMSIZ);
if((ieee->state == IEEE80211_LINKED) ||
(ieee->state == IEEE80211_LINKED_SCANNING))
- strcat(wrqu->name," linked");
+ strlcat(wrqu->name," link", IFNAMSIZ);
else if(ieee->state != IEEE80211_NOLINK)
- strcat(wrqu->name," link..");
+ strlcat(wrqu->name," .....", IFNAMSIZ);
return 0;
diff --git a/drivers/staging/rtl8192su/Kconfig b/drivers/staging/rtl8192su/Kconfig
index 4b5552c..770f412 100644
--- a/drivers/staging/rtl8192su/Kconfig
+++ b/drivers/staging/rtl8192su/Kconfig
@@ -1,6 +1,6 @@
config RTL8192SU
tristate "RealTek RTL8192SU Wireless LAN NIC driver"
depends on PCI
- depends on WIRELESS_EXT && COMPAT_NET_DEV_OPS
+ depends on WIRELESS_EXT
default N
---help---
diff --git a/drivers/staging/rtl8192su/ieee80211/ieee80211_module.c b/drivers/staging/rtl8192su/ieee80211/ieee80211_module.c
index f408b45..759032d 100644
--- a/drivers/staging/rtl8192su/ieee80211/ieee80211_module.c
+++ b/drivers/staging/rtl8192su/ieee80211/ieee80211_module.c
@@ -118,7 +118,6 @@
#else
ieee = (struct ieee80211_device *)dev->priv;
#endif
- dev->hard_start_xmit = ieee80211_xmit;
memset(ieee, 0, sizeof(struct ieee80211_device)+sizeof_priv);
ieee->dev = dev;
diff --git a/drivers/staging/rtl8192su/ieee80211/ieee80211_softmac_wx.c b/drivers/staging/rtl8192su/ieee80211/ieee80211_softmac_wx.c
index 1f50c46..191dc3f 100644
--- a/drivers/staging/rtl8192su/ieee80211/ieee80211_softmac_wx.c
+++ b/drivers/staging/rtl8192su/ieee80211/ieee80211_softmac_wx.c
@@ -548,21 +548,21 @@
struct iw_request_info *info,
union iwreq_data *wrqu, char *extra)
{
- strcpy(wrqu->name, "802.11");
+ strlcpy(wrqu->name, "802.11", IFNAMSIZ);
if(ieee->modulation & IEEE80211_CCK_MODULATION){
- strcat(wrqu->name, "b");
+ strlcat(wrqu->name, "b", IFNAMSIZ);
if(ieee->modulation & IEEE80211_OFDM_MODULATION)
- strcat(wrqu->name, "/g");
+ strlcat(wrqu->name, "/g", IFNAMSIZ);
}else if(ieee->modulation & IEEE80211_OFDM_MODULATION)
- strcat(wrqu->name, "g");
+ strlcat(wrqu->name, "g", IFNAMSIZ);
if (ieee->mode & (IEEE_N_24G | IEEE_N_5G))
- strcat(wrqu->name, "/n");
+ strlcat(wrqu->name, "/n", IFNAMSIZ);
if((ieee->state == IEEE80211_LINKED) ||
(ieee->state == IEEE80211_LINKED_SCANNING))
- strcat(wrqu->name," linked");
+ strlcat(wrqu->name, " link", IFNAMSIZ);
else if(ieee->state != IEEE80211_NOLINK)
- strcat(wrqu->name," link..");
+ strlcat(wrqu->name, " .....", IFNAMSIZ);
return 0;
diff --git a/drivers/staging/rtl8192su/r8192U_core.c b/drivers/staging/rtl8192su/r8192U_core.c
index f1423d7..4ab2507 100644
--- a/drivers/staging/rtl8192su/r8192U_core.c
+++ b/drivers/staging/rtl8192su/r8192U_core.c
@@ -12132,6 +12132,19 @@
}
#endif
+static const struct net_device_ops rtl8192_netdev_ops = {
+ .ndo_open = rtl8192_open,
+ .ndo_stop = rtl8192_close,
+ .ndo_get_stats = rtl8192_stats,
+ .ndo_tx_timeout = tx_timeout,
+ .ndo_do_ioctl = rtl8192_ioctl,
+ .ndo_set_multicast_list = r8192_set_multicast,
+ .ndo_set_mac_address = r8192_set_mac_adr,
+ .ndo_validate_addr = eth_validate_addr,
+ .ndo_change_mtu = eth_change_mtu,
+ .ndo_start_xmit = ieee80211_xmit,
+};
+
#if LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0)
static int __devinit rtl8192_usb_probe(struct usb_interface *intf,
const struct usb_device_id *id)
@@ -12186,15 +12199,7 @@
priv->ops = &rtl8192u_ops;
#endif
- dev->open = rtl8192_open;
- dev->stop = rtl8192_close;
- //dev->hard_start_xmit = rtl8192_8023_hard_start_xmit;
- dev->tx_timeout = tx_timeout;
- //dev->wireless_handlers = &r8192_wx_handlers_def;
- dev->do_ioctl = rtl8192_ioctl;
- dev->set_multicast_list = r8192_set_multicast;
- dev->set_mac_address = r8192_set_mac_adr;
- dev->get_stats = rtl8192_stats;
+ dev->netdev_ops = &rtl8192_netdev_ops;
//DMESG("Oops: i'm coming\n");
#if WIRELESS_EXT >= 12
diff --git a/drivers/staging/rtl8192su/r8192U_pm.c b/drivers/staging/rtl8192su/r8192U_pm.c
index 92c95aa..b1531a8 100644
--- a/drivers/staging/rtl8192su/r8192U_pm.c
+++ b/drivers/staging/rtl8192su/r8192U_pm.c
@@ -35,7 +35,9 @@
return 0;
}
- dev->stop(dev);
+ if (dev->netdev_ops->ndo_stop)
+ dev->netdev_ops->ndo_stop(dev);
+
mdelay(10);
netif_device_detach(dev);
@@ -61,7 +63,9 @@
}
netif_device_attach(dev);
- dev->open(dev);
+
+ if (dev->netdev_ops->ndo_open)
+ dev->netdev_ops->ndo_open(dev);
}
return 0;
diff --git a/drivers/staging/serqt_usb2/serqt_usb2.c b/drivers/staging/serqt_usb2/serqt_usb2.c
index 90b29b5..a9bd410 100644
--- a/drivers/staging/serqt_usb2/serqt_usb2.c
+++ b/drivers/staging/serqt_usb2/serqt_usb2.c
@@ -866,7 +866,7 @@
}
-int qt_open(struct tty_struct *tty,
+static int qt_open(struct tty_struct *tty,
struct usb_serial_port *port, struct file *filp)
{
struct usb_serial *serial;
@@ -1041,17 +1041,19 @@
}
}
-static void qt_close(struct tty_struct *tty, struct usb_serial_port *port,
- struct file *filp)
+static void qt_close( struct usb_serial_port *port)
{
struct usb_serial *serial = port->serial;
struct quatech_port *qt_port;
struct quatech_port *port0;
+ struct tty_struct *tty;
int status;
unsigned int index;
status = 0;
dbg("%s - port %d\n", __func__, port->number);
+
+ tty = tty_port_tty_get(&port->port);
index = tty->index - serial->minor;
qt_port = qt_get_port_private(port);
diff --git a/drivers/staging/stlc45xx/stlc45xx.c b/drivers/staging/stlc45xx/stlc45xx.c
index cfdaac9..a137c78 100644
--- a/drivers/staging/stlc45xx/stlc45xx.c
+++ b/drivers/staging/stlc45xx/stlc45xx.c
@@ -2235,24 +2235,6 @@
stlc45xx_debug(DEBUG_FUNC, "%s", __func__);
}
-static int stlc45xx_op_config_interface(struct ieee80211_hw *hw,
- struct ieee80211_vif *vif,
- struct ieee80211_if_conf *conf)
-{
- struct stlc45xx *stlc = hw->priv;
-
- stlc45xx_debug(DEBUG_FUNC, "%s", __func__);
-
- mutex_lock(&stlc->mutex);
-
- memcpy(stlc->bssid, conf->bssid, ETH_ALEN);
- stlc45xx_tx_setup(stlc);
-
- mutex_unlock(&stlc->mutex);
-
- return 0;
-}
-
static int stlc45xx_op_config(struct ieee80211_hw *hw, u32 changed)
{
struct stlc45xx *stlc = hw->priv;
@@ -2295,6 +2277,14 @@
{
struct stlc45xx *stlc = hw->priv;
+ stlc45xx_debug(DEBUG_FUNC, "%s", __func__);
+ mutex_lock(&stlc->mutex);
+
+ memcpy(stlc->bssid, info->bssid, ETH_ALEN);
+ stlc45xx_tx_setup(stlc);
+
+ mutex_unlock(&stlc->mutex);
+
if (changed & BSS_CHANGED_ASSOC) {
stlc->associated = info->assoc;
if (info->assoc)
@@ -2357,7 +2347,6 @@
.add_interface = stlc45xx_op_add_interface,
.remove_interface = stlc45xx_op_remove_interface,
.config = stlc45xx_op_config,
- .config_interface = stlc45xx_op_config_interface,
.configure_filter = stlc45xx_op_configure_filter,
.tx = stlc45xx_op_tx,
.bss_info_changed = stlc45xx_op_bss_info_changed,
diff --git a/drivers/staging/usbip/usbip_common.c b/drivers/staging/usbip/usbip_common.c
index 22f93dd..251220d 100644
--- a/drivers/staging/usbip/usbip_common.c
+++ b/drivers/staging/usbip/usbip_common.c
@@ -18,6 +18,7 @@
*/
#include <linux/kernel.h>
+#include <linux/smp_lock.h>
#include <linux/file.h>
#include <linux/tcp.h>
#include <linux/in.h>
diff --git a/drivers/staging/vt6655/device_main.c b/drivers/staging/vt6655/device_main.c
index a10ed27..f43ca41 100644
--- a/drivers/staging/vt6655/device_main.c
+++ b/drivers/staging/vt6655/device_main.c
@@ -344,7 +344,7 @@
};
static struct pci_device_id device_id_table[] __devinitdata = {
-{ 0x1106, 0x3253, PCI_ANY_ID, PCI_ANY_ID, 0, 0, (int)&chip_info_table[0]},
+{ 0x1106, 0x3253, PCI_ANY_ID, PCI_ANY_ID, 0, 0, (long)&chip_info_table[0]},
{ 0, }
};
#endif
@@ -369,7 +369,7 @@
#ifdef CONFIG_PM
static int device_notify_reboot(struct notifier_block *, unsigned long event, void *ptr);
-static int viawget_suspend(struct pci_dev *pcid, u32 state);
+static int viawget_suspend(struct pci_dev *pcid, pm_message_t state);
static int viawget_resume(struct pci_dev *pcid);
struct notifier_block device_notifier = {
notifier_call: device_notify_reboot,
@@ -3941,7 +3941,7 @@
while ((pdev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, pdev)) != NULL) {
if(pci_dev_driver(pdev) == &device_driver) {
if (pci_get_drvdata(pdev))
- viawget_suspend(pdev, 3);
+ viawget_suspend(pdev, PMSG_HIBERNATE);
}
}
}
@@ -3949,7 +3949,7 @@
}
static int
-viawget_suspend(struct pci_dev *pcid, u32 state)
+viawget_suspend(struct pci_dev *pcid, pm_message_t state)
{
int power_status; // to silence the compiler
@@ -3971,7 +3971,7 @@
memset(pMgmt->abyCurrBSSID, 0, 6);
pMgmt->eCurrState = WMAC_STATE_IDLE;
pci_disable_device(pcid);
- power_status = pci_set_power_state(pcid, state);
+ power_status = pci_set_power_state(pcid, pci_choose_state(pcid, state));
spin_unlock_irq(&pDevice->lock);
return 0;
}
diff --git a/drivers/telephony/ixj.c b/drivers/telephony/ixj.c
index a913efc..40de151 100644
--- a/drivers/telephony/ixj.c
+++ b/drivers/telephony/ixj.c
@@ -257,6 +257,7 @@
#include <linux/fs.h> /* everything... */
#include <linux/errno.h> /* error codes */
#include <linux/slab.h>
+#include <linux/smp_lock.h>
#include <linux/mm.h>
#include <linux/ioport.h>
#include <linux/interrupt.h>
diff --git a/drivers/telephony/phonedev.c b/drivers/telephony/phonedev.c
index b52cc83..f3873f6 100644
--- a/drivers/telephony/phonedev.c
+++ b/drivers/telephony/phonedev.c
@@ -23,7 +23,6 @@
#include <linux/errno.h>
#include <linux/phonedev.h>
#include <linux/init.h>
-#include <linux/smp_lock.h>
#include <asm/uaccess.h>
#include <asm/system.h>
diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c
index 38bfdb0..5b15d9d 100644
--- a/drivers/usb/class/cdc-acm.c
+++ b/drivers/usb/class/cdc-acm.c
@@ -387,6 +387,7 @@
struct acm_ru *rcv;
unsigned long flags;
unsigned char throttled;
+ struct usb_host_endpoint *ep;
dbg("Entering acm_rx_tasklet");
@@ -462,11 +463,20 @@
rcv->buffer = buf;
- usb_fill_bulk_urb(rcv->urb, acm->dev,
- acm->rx_endpoint,
- buf->base,
- acm->readsize,
- acm_read_bulk, rcv);
+ ep = (usb_pipein(acm->rx_endpoint) ? acm->dev->ep_in : acm->dev->ep_out)
+ [usb_pipeendpoint(acm->rx_endpoint)];
+ if (usb_endpoint_xfer_int(&ep->desc))
+ usb_fill_int_urb(rcv->urb, acm->dev,
+ acm->rx_endpoint,
+ buf->base,
+ acm->readsize,
+ acm_read_bulk, rcv, ep->desc.bInterval);
+ else
+ usb_fill_bulk_urb(rcv->urb, acm->dev,
+ acm->rx_endpoint,
+ buf->base,
+ acm->readsize,
+ acm_read_bulk, rcv);
rcv->urb->transfer_dma = buf->dma;
rcv->urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
@@ -550,7 +560,7 @@
static int acm_tty_open(struct tty_struct *tty, struct file *filp)
{
struct acm *acm;
- int rv = -EINVAL;
+ int rv = -ENODEV;
int i;
dbg("Entering acm_tty_open.");
@@ -677,7 +687,7 @@
/* Perform the closing process and see if we need to do the hardware
shutdown */
- if (tty_port_close_start(&acm->port, tty, filp) == 0)
+ if (!acm || tty_port_close_start(&acm->port, tty, filp) == 0)
return;
acm_port_down(acm, 0);
tty_port_close_end(&acm->port, tty);
@@ -1227,9 +1237,14 @@
goto alloc_fail7;
}
- usb_fill_bulk_urb(snd->urb, usb_dev,
- usb_sndbulkpipe(usb_dev, epwrite->bEndpointAddress),
- NULL, acm->writesize, acm_write_bulk, snd);
+ if (usb_endpoint_xfer_int(epwrite))
+ usb_fill_int_urb(snd->urb, usb_dev,
+ usb_sndbulkpipe(usb_dev, epwrite->bEndpointAddress),
+ NULL, acm->writesize, acm_write_bulk, snd, epwrite->bInterval);
+ else
+ usb_fill_bulk_urb(snd->urb, usb_dev,
+ usb_sndbulkpipe(usb_dev, epwrite->bEndpointAddress),
+ NULL, acm->writesize, acm_write_bulk, snd);
snd->urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
snd->instance = acm;
}
diff --git a/drivers/usb/class/cdc-wdm.c b/drivers/usb/class/cdc-wdm.c
index 0fe4345..ba589d4 100644
--- a/drivers/usb/class/cdc-wdm.c
+++ b/drivers/usb/class/cdc-wdm.c
@@ -15,7 +15,6 @@
#include <linux/errno.h>
#include <linux/slab.h>
#include <linux/module.h>
-#include <linux/smp_lock.h>
#include <linux/mutex.h>
#include <linux/uaccess.h>
#include <linux/bitops.h>
diff --git a/drivers/usb/class/usbtmc.c b/drivers/usb/class/usbtmc.c
index 3703789..b09a527 100644
--- a/drivers/usb/class/usbtmc.c
+++ b/drivers/usb/class/usbtmc.c
@@ -751,7 +751,7 @@
{
struct device *dev = &data->usb_dev->dev;
char *buffer;
- int rv;
+ int rv = 0;
buffer = kmalloc(0x18, GFP_KERNEL);
if (!buffer)
@@ -763,7 +763,7 @@
0, 0, buffer, 0x18, USBTMC_TIMEOUT);
if (rv < 0) {
dev_err(dev, "usb_control_msg returned %d\n", rv);
- return rv;
+ goto err_out;
}
dev_dbg(dev, "GET_CAPABILITIES returned %x\n", buffer[0]);
@@ -773,7 +773,8 @@
dev_dbg(dev, "USB488 device capabilities are %x\n", buffer[15]);
if (buffer[0] != USBTMC_STATUS_SUCCESS) {
dev_err(dev, "GET_CAPABILITIES returned %x\n", buffer[0]);
- return -EPERM;
+ rv = -EPERM;
+ goto err_out;
}
data->capabilities.interface_capabilities = buffer[4];
@@ -781,8 +782,9 @@
data->capabilities.usb488_interface_capabilities = buffer[14];
data->capabilities.usb488_device_capabilities = buffer[15];
+err_out:
kfree(buffer);
- return 0;
+ return rv;
}
#define capability_attribute(name) \
diff --git a/drivers/usb/core/Kconfig b/drivers/usb/core/Kconfig
index 69280c3..ad92594 100644
--- a/drivers/usb/core/Kconfig
+++ b/drivers/usb/core/Kconfig
@@ -28,7 +28,7 @@
depends on USB
config USB_DEVICEFS
- bool "USB device filesystem (DEPRECATED)" if EMBEDDED
+ bool "USB device filesystem (DEPRECATED)"
depends on USB
---help---
If you say Y here (and to "/proc file system support" in the "File
diff --git a/drivers/usb/core/devices.c b/drivers/usb/core/devices.c
index 73c108d..96f1171 100644
--- a/drivers/usb/core/devices.c
+++ b/drivers/usb/core/devices.c
@@ -136,17 +136,19 @@
{USB_CLASS_AUDIO, "audio"},
{USB_CLASS_COMM, "comm."},
{USB_CLASS_HID, "HID"},
- {USB_CLASS_HUB, "hub"},
{USB_CLASS_PHYSICAL, "PID"},
+ {USB_CLASS_STILL_IMAGE, "still"},
{USB_CLASS_PRINTER, "print"},
{USB_CLASS_MASS_STORAGE, "stor."},
+ {USB_CLASS_HUB, "hub"},
{USB_CLASS_CDC_DATA, "data"},
- {USB_CLASS_APP_SPEC, "app."},
- {USB_CLASS_VENDOR_SPEC, "vend."},
- {USB_CLASS_STILL_IMAGE, "still"},
{USB_CLASS_CSCID, "scard"},
{USB_CLASS_CONTENT_SEC, "c-sec"},
{USB_CLASS_VIDEO, "video"},
+ {USB_CLASS_WIRELESS_CONTROLLER, "wlcon"},
+ {USB_CLASS_MISC, "misc"},
+ {USB_CLASS_APP_SPEC, "app."},
+ {USB_CLASS_VENDOR_SPEC, "vend."},
{-1, "unk."} /* leave as last */
};
diff --git a/drivers/usb/core/devio.c b/drivers/usb/core/devio.c
index 3086090..38b8bce 100644
--- a/drivers/usb/core/devio.c
+++ b/drivers/usb/core/devio.c
@@ -325,21 +325,34 @@
struct async *as = urb->context;
struct dev_state *ps = as->ps;
struct siginfo sinfo;
+ struct pid *pid = NULL;
+ uid_t uid = 0;
+ uid_t euid = 0;
+ u32 secid = 0;
+ int signr;
spin_lock(&ps->lock);
list_move_tail(&as->asynclist, &ps->async_completed);
- spin_unlock(&ps->lock);
as->status = urb->status;
- if (as->signr) {
+ signr = as->signr;
+ if (signr) {
sinfo.si_signo = as->signr;
sinfo.si_errno = as->status;
sinfo.si_code = SI_ASYNCIO;
sinfo.si_addr = as->userurb;
- kill_pid_info_as_uid(as->signr, &sinfo, as->pid, as->uid,
- as->euid, as->secid);
+ pid = as->pid;
+ uid = as->uid;
+ euid = as->euid;
+ secid = as->secid;
}
snoop(&urb->dev->dev, "urb complete\n");
snoop_urb(urb, as->userurb);
+ spin_unlock(&ps->lock);
+
+ if (signr)
+ kill_pid_info_as_uid(sinfo.si_signo, &sinfo, pid, uid,
+ euid, secid);
+
wake_up(&ps->wait);
}
@@ -982,7 +995,7 @@
USBDEVFS_URB_ZERO_PACKET |
USBDEVFS_URB_NO_INTERRUPT))
return -EINVAL;
- if (!uurb->buffer)
+ if (uurb->buffer_length > 0 && !uurb->buffer)
return -EINVAL;
if (!(uurb->type == USBDEVFS_URB_TYPE_CONTROL &&
(uurb->endpoint & ~USB_ENDPOINT_DIR_MASK) == 0)) {
@@ -1038,11 +1051,6 @@
is_in = 0;
uurb->endpoint &= ~USB_DIR_IN;
}
- if (!access_ok(is_in ? VERIFY_WRITE : VERIFY_READ,
- uurb->buffer, uurb->buffer_length)) {
- kfree(dr);
- return -EFAULT;
- }
snoop(&ps->dev->dev, "control urb: bRequest=%02x "
"bRrequestType=%02x wValue=%04x "
"wIndex=%04x wLength=%04x\n",
@@ -1062,9 +1070,6 @@
uurb->number_of_packets = 0;
if (uurb->buffer_length > MAX_USBFS_BUFFER_SIZE)
return -EINVAL;
- if (!access_ok(is_in ? VERIFY_WRITE : VERIFY_READ,
- uurb->buffer, uurb->buffer_length))
- return -EFAULT;
snoop(&ps->dev->dev, "bulk urb\n");
break;
@@ -1106,27 +1111,34 @@
return -EINVAL;
if (uurb->buffer_length > MAX_USBFS_BUFFER_SIZE)
return -EINVAL;
- if (!access_ok(is_in ? VERIFY_WRITE : VERIFY_READ,
- uurb->buffer, uurb->buffer_length))
- return -EFAULT;
snoop(&ps->dev->dev, "interrupt urb\n");
break;
default:
return -EINVAL;
}
+ if (uurb->buffer_length > 0 &&
+ !access_ok(is_in ? VERIFY_WRITE : VERIFY_READ,
+ uurb->buffer, uurb->buffer_length)) {
+ kfree(isopkt);
+ kfree(dr);
+ return -EFAULT;
+ }
as = alloc_async(uurb->number_of_packets);
if (!as) {
kfree(isopkt);
kfree(dr);
return -ENOMEM;
}
- as->urb->transfer_buffer = kmalloc(uurb->buffer_length, GFP_KERNEL);
- if (!as->urb->transfer_buffer) {
- kfree(isopkt);
- kfree(dr);
- free_async(as);
- return -ENOMEM;
+ if (uurb->buffer_length > 0) {
+ as->urb->transfer_buffer = kmalloc(uurb->buffer_length,
+ GFP_KERNEL);
+ if (!as->urb->transfer_buffer) {
+ kfree(isopkt);
+ kfree(dr);
+ free_async(as);
+ return -ENOMEM;
+ }
}
as->urb->dev = ps->dev;
as->urb->pipe = (uurb->type << 30) |
@@ -1169,7 +1181,7 @@
kfree(isopkt);
as->ps = ps;
as->userurb = arg;
- if (uurb->endpoint & USB_DIR_IN)
+ if (is_in && uurb->buffer_length > 0)
as->userbuffer = uurb->buffer;
else
as->userbuffer = NULL;
@@ -1179,9 +1191,9 @@
as->uid = cred->uid;
as->euid = cred->euid;
security_task_getsecid(current, &as->secid);
- if (!is_in) {
+ if (!is_in && uurb->buffer_length > 0) {
if (copy_from_user(as->urb->transfer_buffer, uurb->buffer,
- as->urb->transfer_buffer_length)) {
+ uurb->buffer_length)) {
free_async(as);
return -EFAULT;
}
@@ -1231,22 +1243,22 @@
if (as->userbuffer)
if (copy_to_user(as->userbuffer, urb->transfer_buffer,
urb->transfer_buffer_length))
- return -EFAULT;
+ goto err_out;
if (put_user(as->status, &userurb->status))
- return -EFAULT;
+ goto err_out;
if (put_user(urb->actual_length, &userurb->actual_length))
- return -EFAULT;
+ goto err_out;
if (put_user(urb->error_count, &userurb->error_count))
- return -EFAULT;
+ goto err_out;
if (usb_endpoint_xfer_isoc(&urb->ep->desc)) {
for (i = 0; i < urb->number_of_packets; i++) {
if (put_user(urb->iso_frame_desc[i].actual_length,
&userurb->iso_frame_desc[i].actual_length))
- return -EFAULT;
+ goto err_out;
if (put_user(urb->iso_frame_desc[i].status,
&userurb->iso_frame_desc[i].status))
- return -EFAULT;
+ goto err_out;
}
}
@@ -1255,6 +1267,10 @@
if (put_user(addr, (void __user * __user *)arg))
return -EFAULT;
return 0;
+
+err_out:
+ free_async(as);
+ return -EFAULT;
}
static struct async *reap_as(struct dev_state *ps)
diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c
index ce3f453..95ccfa0 100644
--- a/drivers/usb/core/hcd.c
+++ b/drivers/usb/core/hcd.c
@@ -648,7 +648,7 @@
struct urb *urb;
int length;
unsigned long flags;
- char buffer[4]; /* Any root hubs with > 31 ports? */
+ char buffer[6]; /* Any root hubs with > 31 ports? */
if (unlikely(!hcd->rh_registered))
return;
diff --git a/drivers/usb/core/hcd.h b/drivers/usb/core/hcd.h
index d397ecf..ec5c67e 100644
--- a/drivers/usb/core/hcd.h
+++ b/drivers/usb/core/hcd.h
@@ -227,6 +227,10 @@
/* has a port been handed over to a companion? */
int (*port_handed_over)(struct usb_hcd *, int);
+ /* CLEAR_TT_BUFFER completion callback */
+ void (*clear_tt_buffer_complete)(struct usb_hcd *,
+ struct usb_host_endpoint *);
+
/* xHCI specific functions */
/* Called by usb_alloc_dev to alloc HC device structures */
int (*alloc_dev)(struct usb_hcd *, struct usb_device *);
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index 2af3b4f..71f86c6 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -450,10 +450,10 @@
* talking to TTs must queue control transfers (not just bulk and iso), so
* both can talk to the same hub concurrently.
*/
-static void hub_tt_kevent (struct work_struct *work)
+static void hub_tt_work(struct work_struct *work)
{
struct usb_hub *hub =
- container_of(work, struct usb_hub, tt.kevent);
+ container_of(work, struct usb_hub, tt.clear_work);
unsigned long flags;
int limit = 100;
@@ -462,6 +462,7 @@
struct list_head *next;
struct usb_tt_clear *clear;
struct usb_device *hdev = hub->hdev;
+ const struct hc_driver *drv;
int status;
next = hub->tt.clear_list.next;
@@ -471,21 +472,25 @@
/* drop lock so HCD can concurrently report other TT errors */
spin_unlock_irqrestore (&hub->tt.lock, flags);
status = hub_clear_tt_buffer (hdev, clear->devinfo, clear->tt);
- spin_lock_irqsave (&hub->tt.lock, flags);
-
if (status)
dev_err (&hdev->dev,
"clear tt %d (%04x) error %d\n",
clear->tt, clear->devinfo, status);
+
+ /* Tell the HCD, even if the operation failed */
+ drv = clear->hcd->driver;
+ if (drv->clear_tt_buffer_complete)
+ (drv->clear_tt_buffer_complete)(clear->hcd, clear->ep);
+
kfree(clear);
+ spin_lock_irqsave(&hub->tt.lock, flags);
}
spin_unlock_irqrestore (&hub->tt.lock, flags);
}
/**
- * usb_hub_tt_clear_buffer - clear control/bulk TT state in high speed hub
- * @udev: the device whose split transaction failed
- * @pipe: identifies the endpoint of the failed transaction
+ * usb_hub_clear_tt_buffer - clear control/bulk TT state in high speed hub
+ * @urb: an URB associated with the failed or incomplete split transaction
*
* High speed HCDs use this to tell the hub driver that some split control or
* bulk transaction failed in a way that requires clearing internal state of
@@ -495,8 +500,10 @@
* It may not be possible for that hub to handle additional full (or low)
* speed transactions until that state is fully cleared out.
*/
-void usb_hub_tt_clear_buffer (struct usb_device *udev, int pipe)
+int usb_hub_clear_tt_buffer(struct urb *urb)
{
+ struct usb_device *udev = urb->dev;
+ int pipe = urb->pipe;
struct usb_tt *tt = udev->tt;
unsigned long flags;
struct usb_tt_clear *clear;
@@ -508,7 +515,7 @@
if ((clear = kmalloc (sizeof *clear, GFP_ATOMIC)) == NULL) {
dev_err (&udev->dev, "can't save CLEAR_TT_BUFFER state\n");
/* FIXME recover somehow ... RESET_TT? */
- return;
+ return -ENOMEM;
}
/* info that CLEAR_TT_BUFFER needs */
@@ -520,14 +527,19 @@
: (USB_ENDPOINT_XFER_BULK << 11);
if (usb_pipein (pipe))
clear->devinfo |= 1 << 15;
-
+
+ /* info for completion callback */
+ clear->hcd = bus_to_hcd(udev->bus);
+ clear->ep = urb->ep;
+
/* tell keventd to clear state for this TT */
spin_lock_irqsave (&tt->lock, flags);
list_add_tail (&clear->clear_list, &tt->clear_list);
- schedule_work (&tt->kevent);
+ schedule_work(&tt->clear_work);
spin_unlock_irqrestore (&tt->lock, flags);
+ return 0;
}
-EXPORT_SYMBOL_GPL(usb_hub_tt_clear_buffer);
+EXPORT_SYMBOL_GPL(usb_hub_clear_tt_buffer);
/* If do_delay is false, return the number of milliseconds the caller
* needs to delay.
@@ -818,7 +830,7 @@
if (hub->has_indicators)
cancel_delayed_work_sync(&hub->leds);
if (hub->tt.hub)
- cancel_work_sync(&hub->tt.kevent);
+ cancel_work_sync(&hub->tt.clear_work);
}
/* caller has locked the hub device */
@@ -935,7 +947,7 @@
spin_lock_init (&hub->tt.lock);
INIT_LIST_HEAD (&hub->tt.clear_list);
- INIT_WORK (&hub->tt.kevent, hub_tt_kevent);
+ INIT_WORK(&hub->tt.clear_work, hub_tt_work);
switch (hdev->descriptor.bDeviceProtocol) {
case 0:
break;
diff --git a/drivers/usb/core/hub.h b/drivers/usb/core/hub.h
index 889c0f3..de8081f 100644
--- a/drivers/usb/core/hub.h
+++ b/drivers/usb/core/hub.h
@@ -188,16 +188,18 @@
/* for control/bulk error recovery (CLEAR_TT_BUFFER) */
spinlock_t lock;
struct list_head clear_list; /* of usb_tt_clear */
- struct work_struct kevent;
+ struct work_struct clear_work;
};
struct usb_tt_clear {
struct list_head clear_list;
unsigned tt;
u16 devinfo;
+ struct usb_hcd *hcd;
+ struct usb_host_endpoint *ep;
};
-extern void usb_hub_tt_clear_buffer(struct usb_device *dev, int pipe);
+extern int usb_hub_clear_tt_buffer(struct urb *urb);
extern void usb_ep0_reinit(struct usb_device *);
#endif /* __LINUX_HUB_H */
diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c
index 2bed83c..9720e699 100644
--- a/drivers/usb/core/message.c
+++ b/drivers/usb/core/message.c
@@ -806,6 +806,48 @@
return rc;
}
+static int usb_get_langid(struct usb_device *dev, unsigned char *tbuf)
+{
+ int err;
+
+ if (dev->have_langid)
+ return 0;
+
+ if (dev->string_langid < 0)
+ return -EPIPE;
+
+ err = usb_string_sub(dev, 0, 0, tbuf);
+
+ /* If the string was reported but is malformed, default to english
+ * (0x0409) */
+ if (err == -ENODATA || (err > 0 && err < 4)) {
+ dev->string_langid = 0x0409;
+ dev->have_langid = 1;
+ dev_err(&dev->dev,
+ "string descriptor 0 malformed (err = %d), "
+ "defaulting to 0x%04x\n",
+ err, dev->string_langid);
+ return 0;
+ }
+
+ /* In case of all other errors, we assume the device is not able to
+ * deal with strings at all. Set string_langid to -1 in order to
+ * prevent any string to be retrieved from the device */
+ if (err < 0) {
+ dev_err(&dev->dev, "string descriptor 0 read error: %d\n",
+ err);
+ dev->string_langid = -1;
+ return -EPIPE;
+ }
+
+ /* always use the first langid listed */
+ dev->string_langid = tbuf[2] | (tbuf[3] << 8);
+ dev->have_langid = 1;
+ dev_dbg(&dev->dev, "default language 0x%04x\n",
+ dev->string_langid);
+ return 0;
+}
+
/**
* usb_string - returns UTF-8 version of a string descriptor
* @dev: the device whose string descriptor is being retrieved
@@ -837,24 +879,9 @@
if (!tbuf)
return -ENOMEM;
- /* get langid for strings if it's not yet known */
- if (!dev->have_langid) {
- err = usb_string_sub(dev, 0, 0, tbuf);
- if (err < 0) {
- dev_err(&dev->dev,
- "string descriptor 0 read error: %d\n",
- err);
- } else if (err < 4) {
- dev_err(&dev->dev, "string descriptor 0 too short\n");
- } else {
- dev->string_langid = tbuf[2] | (tbuf[3] << 8);
- /* always use the first langid listed */
- dev_dbg(&dev->dev, "default language 0x%04x\n",
- dev->string_langid);
- }
-
- dev->have_langid = 1;
- }
+ err = usb_get_langid(dev, tbuf);
+ if (err < 0)
+ goto errout;
err = usb_string_sub(dev, dev->string_langid, index, tbuf);
if (err < 0)
diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig
index 5d1ddf4..7f8e83a 100644
--- a/drivers/usb/gadget/Kconfig
+++ b/drivers/usb/gadget/Kconfig
@@ -286,6 +286,27 @@
default USB_GADGET
select USB_GADGET_SELECTED
+config USB_GADGET_IMX
+ boolean "Freescale IMX USB Peripheral Controller"
+ depends on ARCH_MX1
+ help
+ Freescale's IMX series include an integrated full speed
+ USB 1.1 device controller. The controller in the IMX series
+ is register-compatible.
+
+ It has Six fixed-function endpoints, as well as endpoint
+ zero (for control transfers).
+
+ Say "y" to link the driver statically, or "m" to build a
+ dynamically linked module called "imx_udc" and force all
+ gadget drivers to also be dynamically linked.
+
+config USB_IMX
+ tristate
+ depends on USB_GADGET_IMX
+ default USB_GADGET
+ select USB_GADGET_SELECTED
+
config USB_GADGET_S3C2410
boolean "S3C2410 USB Device Controller"
depends on ARCH_S3C2410
@@ -321,27 +342,6 @@
This OTG-capable silicon IP is used in dual designs including
the TI DaVinci, OMAP 243x, OMAP 343x, TUSB 6010, and ADI Blackfin
-config USB_GADGET_IMX
- boolean "Freescale IMX USB Peripheral Controller"
- depends on ARCH_MX1
- help
- Freescale's IMX series include an integrated full speed
- USB 1.1 device controller. The controller in the IMX series
- is register-compatible.
-
- It has Six fixed-function endpoints, as well as endpoint
- zero (for control transfers).
-
- Say "y" to link the driver statically, or "m" to build a
- dynamically linked module called "imx_udc" and force all
- gadget drivers to also be dynamically linked.
-
-config USB_IMX
- tristate
- depends on USB_GADGET_IMX
- default USB_GADGET
- select USB_GADGET_SELECTED
-
config USB_GADGET_M66592
boolean "Renesas M66592 USB Peripheral Controller"
select USB_GADGET_DUALSPEED
@@ -604,6 +604,7 @@
config USB_AUDIO
tristate "Audio Gadget (EXPERIMENTAL)"
depends on SND
+ select SND_PCM
help
Gadget Audio is compatible with USB Audio Class specification 1.0.
It will include at least one AudioControl interface, zero or more
diff --git a/drivers/usb/gadget/amd5536udc.c b/drivers/usb/gadget/amd5536udc.c
index 826f3ad..77352cc 100644
--- a/drivers/usb/gadget/amd5536udc.c
+++ b/drivers/usb/gadget/amd5536udc.c
@@ -48,7 +48,6 @@
#include <linux/ioport.h>
#include <linux/sched.h>
#include <linux/slab.h>
-#include <linux/smp_lock.h>
#include <linux/errno.h>
#include <linux/init.h>
#include <linux/timer.h>
diff --git a/drivers/usb/gadget/audio.c b/drivers/usb/gadget/audio.c
index 94de7e8..9f80f4e 100644
--- a/drivers/usb/gadget/audio.c
+++ b/drivers/usb/gadget/audio.c
@@ -42,9 +42,9 @@
* Instead: allocate your own, using normal USB-IF procedures.
*/
-/* Thanks to NetChip Technologies for donating this product ID. */
-#define AUDIO_VENDOR_NUM 0x0525 /* NetChip */
-#define AUDIO_PRODUCT_NUM 0xa4a1 /* Linux-USB Audio Gadget */
+/* Thanks to Linux Foundation for donating this product ID. */
+#define AUDIO_VENDOR_NUM 0x1d6b /* Linux Foundation */
+#define AUDIO_PRODUCT_NUM 0x0101 /* Linux-USB Audio Gadget */
/*-------------------------------------------------------------------------*/
diff --git a/drivers/usb/gadget/ether.c b/drivers/usb/gadget/ether.c
index d006dc6..bd102f5 100644
--- a/drivers/usb/gadget/ether.c
+++ b/drivers/usb/gadget/ether.c
@@ -293,15 +293,16 @@
/* CDC Subset */
eth_config_driver.label = "CDC Subset/SAFE";
- device_desc.idVendor = cpu_to_le16(SIMPLE_VENDOR_NUM),
- device_desc.idProduct = cpu_to_le16(SIMPLE_PRODUCT_NUM),
- device_desc.bDeviceClass = USB_CLASS_VENDOR_SPEC;
+ device_desc.idVendor = cpu_to_le16(SIMPLE_VENDOR_NUM);
+ device_desc.idProduct = cpu_to_le16(SIMPLE_PRODUCT_NUM);
+ if (!has_rndis())
+ device_desc.bDeviceClass = USB_CLASS_VENDOR_SPEC;
}
if (has_rndis()) {
/* RNDIS plus ECM-or-Subset */
- device_desc.idVendor = cpu_to_le16(RNDIS_VENDOR_NUM),
- device_desc.idProduct = cpu_to_le16(RNDIS_PRODUCT_NUM),
+ device_desc.idVendor = cpu_to_le16(RNDIS_VENDOR_NUM);
+ device_desc.idProduct = cpu_to_le16(RNDIS_PRODUCT_NUM);
device_desc.bNumConfigurations = 2;
}
diff --git a/drivers/usb/gadget/langwell_udc.c b/drivers/usb/gadget/langwell_udc.c
index 6829d59..a391351 100644
--- a/drivers/usb/gadget/langwell_udc.c
+++ b/drivers/usb/gadget/langwell_udc.c
@@ -34,7 +34,6 @@
#include <linux/ioport.h>
#include <linux/sched.h>
#include <linux/slab.h>
-#include <linux/smp_lock.h>
#include <linux/errno.h>
#include <linux/init.h>
#include <linux/timer.h>
diff --git a/drivers/usb/gadget/pxa25x_udc.c b/drivers/usb/gadget/pxa25x_udc.c
index 0ce4e28..ed21e26 100644
--- a/drivers/usb/gadget/pxa25x_udc.c
+++ b/drivers/usb/gadget/pxa25x_udc.c
@@ -139,7 +139,7 @@
{
struct pxa2xx_udc_mach_info *mach = the_controller->mach;
- if (mach->gpio_vbus) {
+ if (gpio_is_valid(mach->gpio_vbus)) {
int value = gpio_get_value(mach->gpio_vbus);
if (mach->gpio_vbus_inverted)
@@ -158,7 +158,7 @@
struct pxa2xx_udc_mach_info *mach = the_controller->mach;
int off_level = mach->gpio_pullup_inverted;
- if (mach->gpio_pullup)
+ if (gpio_is_valid(mach->gpio_pullup))
gpio_set_value(mach->gpio_pullup, off_level);
else if (mach->udc_command)
mach->udc_command(PXA2XX_UDC_CMD_DISCONNECT);
@@ -169,7 +169,7 @@
struct pxa2xx_udc_mach_info *mach = the_controller->mach;
int on_level = !mach->gpio_pullup_inverted;
- if (mach->gpio_pullup)
+ if (gpio_is_valid(mach->gpio_pullup))
gpio_set_value(mach->gpio_pullup, on_level);
else if (mach->udc_command)
mach->udc_command(PXA2XX_UDC_CMD_CONNECT);
@@ -1000,7 +1000,7 @@
udc = container_of(_gadget, struct pxa25x_udc, gadget);
/* not all boards support pullup control */
- if (!udc->mach->gpio_pullup && !udc->mach->udc_command)
+ if (!gpio_is_valid(udc->mach->gpio_pullup) && !udc->mach->udc_command)
return -EOPNOTSUPP;
udc->pullup = (is_active != 0);
@@ -1802,11 +1802,13 @@
USIR0 |= tmp;
handled = 1;
}
+#ifndef CONFIG_USB_PXA25X_SMALL
if (usir1 & tmp) {
handle_ep(&dev->ep[i+8]);
USIR1 |= tmp;
handled = 1;
}
+#endif
}
}
@@ -2160,7 +2162,7 @@
dev->dev = &pdev->dev;
dev->mach = pdev->dev.platform_data;
- if (dev->mach->gpio_vbus) {
+ if (gpio_is_valid(dev->mach->gpio_vbus)) {
if ((retval = gpio_request(dev->mach->gpio_vbus,
"pxa25x_udc GPIO VBUS"))) {
dev_dbg(&pdev->dev,
@@ -2173,7 +2175,7 @@
} else
vbus_irq = 0;
- if (dev->mach->gpio_pullup) {
+ if (gpio_is_valid(dev->mach->gpio_pullup)) {
if ((retval = gpio_request(dev->mach->gpio_pullup,
"pca25x_udc GPIO PULLUP"))) {
dev_dbg(&pdev->dev,
@@ -2256,10 +2258,10 @@
#endif
free_irq(irq, dev);
err_irq1:
- if (dev->mach->gpio_pullup)
+ if (gpio_is_valid(dev->mach->gpio_pullup))
gpio_free(dev->mach->gpio_pullup);
err_gpio_pullup:
- if (dev->mach->gpio_vbus)
+ if (gpio_is_valid(dev->mach->gpio_vbus))
gpio_free(dev->mach->gpio_vbus);
err_gpio_vbus:
clk_put(dev->clk);
@@ -2294,11 +2296,11 @@
free_irq(LUBBOCK_USB_IRQ, dev);
}
#endif
- if (dev->mach->gpio_vbus) {
+ if (gpio_is_valid(dev->mach->gpio_vbus)) {
free_irq(gpio_to_irq(dev->mach->gpio_vbus), dev);
gpio_free(dev->mach->gpio_vbus);
}
- if (dev->mach->gpio_pullup)
+ if (gpio_is_valid(dev->mach->gpio_pullup))
gpio_free(dev->mach->gpio_pullup);
clk_put(dev->clk);
@@ -2329,7 +2331,7 @@
struct pxa25x_udc *udc = platform_get_drvdata(dev);
unsigned long flags;
- if (!udc->mach->gpio_pullup && !udc->mach->udc_command)
+ if (!gpio_is_valid(udc->mach->gpio_pullup) && !udc->mach->udc_command)
WARNING("USB host won't detect disconnect!\n");
udc->suspended = 1;
diff --git a/drivers/usb/gadget/rndis.c b/drivers/usb/gadget/rndis.c
index 2b4660e..ca41b0b 100644
--- a/drivers/usb/gadget/rndis.c
+++ b/drivers/usb/gadget/rndis.c
@@ -442,6 +442,8 @@
case OID_802_3_MAC_OPTIONS:
pr_debug("%s: OID_802_3_MAC_OPTIONS\n", __func__);
+ *outbuf = cpu_to_le32(0);
+ retval = 0;
break;
/* ieee802.3 statistics OIDs (table 4-4) */
diff --git a/drivers/usb/gadget/s3c2410_udc.c b/drivers/usb/gadget/s3c2410_udc.c
index 9a2b892..a9b452f 100644
--- a/drivers/usb/gadget/s3c2410_udc.c
+++ b/drivers/usb/gadget/s3c2410_udc.c
@@ -28,7 +28,6 @@
#include <linux/ioport.h>
#include <linux/sched.h>
#include <linux/slab.h>
-#include <linux/smp_lock.h>
#include <linux/errno.h>
#include <linux/init.h>
#include <linux/timer.h>
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index 1576a05..1a920c7 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -181,26 +181,27 @@
Enables support for the USB controller on the MPC52xx or
STB03xxx processor chip. If unsure, say Y.
-config USB_OHCI_HCD_PPC_OF
- bool "OHCI support for PPC USB controller on OF platform bus"
- depends on USB_OHCI_HCD && PPC_OF
- default y
- ---help---
- Enables support for the USB controller PowerPC present on the
- OpenFirmware platform bus.
-
config USB_OHCI_HCD_PPC_OF_BE
- bool "Support big endian HC"
- depends on USB_OHCI_HCD_PPC_OF
- default y
+ bool "OHCI support for OF platform bus (big endian)"
+ depends on USB_OHCI_HCD && PPC_OF
select USB_OHCI_BIG_ENDIAN_DESC
select USB_OHCI_BIG_ENDIAN_MMIO
+ ---help---
+ Enables support for big-endian USB controllers present on the
+ OpenFirmware platform bus.
config USB_OHCI_HCD_PPC_OF_LE
- bool "Support little endian HC"
- depends on USB_OHCI_HCD_PPC_OF
- default n
+ bool "OHCI support for OF platform bus (little endian)"
+ depends on USB_OHCI_HCD && PPC_OF
select USB_OHCI_LITTLE_ENDIAN
+ ---help---
+ Enables support for little-endian USB controllers present on the
+ OpenFirmware platform bus.
+
+config USB_OHCI_HCD_PPC_OF
+ bool
+ depends on USB_OHCI_HCD && PPC_OF
+ default USB_OHCI_HCD_PPC_OF_BE || USB_OHCI_HCD_PPC_OF_LE
config USB_OHCI_HCD_PCI
bool "OHCI support for PCI-bus USB controllers"
@@ -337,10 +338,10 @@
config SUPERH_ON_CHIP_R8A66597
boolean "Enable SuperH on-chip R8A66597 USB"
- depends on USB_R8A66597_HCD && (CPU_SUBTYPE_SH7366 || CPU_SUBTYPE_SH7723)
+ depends on USB_R8A66597_HCD && (CPU_SUBTYPE_SH7366 || CPU_SUBTYPE_SH7723 || CPU_SUBTYPE_SH7724)
help
This driver enables support for the on-chip R8A66597 in the
- SH7366 and SH7723 processors.
+ SH7366, SH7723 and SH7724 processors.
config USB_WHCI_HCD
tristate "Wireless USB Host Controller Interface (WHCI) driver (EXPERIMENTAL)"
diff --git a/drivers/usb/host/ehci-au1xxx.c b/drivers/usb/host/ehci-au1xxx.c
index c3a778b..59d208d 100644
--- a/drivers/usb/host/ehci-au1xxx.c
+++ b/drivers/usb/host/ehci-au1xxx.c
@@ -113,6 +113,8 @@
.bus_resume = ehci_bus_resume,
.relinquish_port = ehci_relinquish_port,
.port_handed_over = ehci_port_handed_over,
+
+ .clear_tt_buffer_complete = ehci_clear_tt_buffer_complete,
};
static int ehci_hcd_au1xxx_drv_probe(struct platform_device *pdev)
diff --git a/drivers/usb/host/ehci-fsl.c b/drivers/usb/host/ehci-fsl.c
index bf86809..9911749 100644
--- a/drivers/usb/host/ehci-fsl.c
+++ b/drivers/usb/host/ehci-fsl.c
@@ -325,6 +325,8 @@
.bus_resume = ehci_bus_resume,
.relinquish_port = ehci_relinquish_port,
.port_handed_over = ehci_port_handed_over,
+
+ .clear_tt_buffer_complete = ehci_clear_tt_buffer_complete,
};
static int ehci_fsl_drv_probe(struct platform_device *pdev)
diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
index 2b72473..7d03549 100644
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -1003,6 +1003,8 @@
schedule_timeout_uninterruptible(1);
goto rescan;
case QH_STATE_IDLE: /* fully unlinked */
+ if (qh->clearing_tt)
+ goto idle_timeout;
if (list_empty (&qh->qtd_list)) {
qh_put (qh);
break;
@@ -1030,12 +1032,14 @@
struct ehci_hcd *ehci = hcd_to_ehci(hcd);
struct ehci_qh *qh;
int eptype = usb_endpoint_type(&ep->desc);
+ int epnum = usb_endpoint_num(&ep->desc);
+ int is_out = usb_endpoint_dir_out(&ep->desc);
+ unsigned long flags;
if (eptype != USB_ENDPOINT_XFER_BULK && eptype != USB_ENDPOINT_XFER_INT)
return;
- rescan:
- spin_lock_irq(&ehci->lock);
+ spin_lock_irqsave(&ehci->lock, flags);
qh = ep->hcpriv;
/* For Bulk and Interrupt endpoints we maintain the toggle state
@@ -1044,29 +1048,24 @@
* the toggle bit in the QH.
*/
if (qh) {
+ usb_settoggle(qh->dev, epnum, is_out, 0);
if (!list_empty(&qh->qtd_list)) {
WARN_ONCE(1, "clear_halt for a busy endpoint\n");
- } else if (qh->qh_state == QH_STATE_IDLE) {
- qh->hw_token &= ~cpu_to_hc32(ehci, QTD_TOGGLE);
- } else {
- /* It's not safe to write into the overlay area
- * while the QH is active. Unlink it first and
- * wait for the unlink to complete.
+ } else if (qh->qh_state == QH_STATE_LINKED) {
+
+ /* The toggle value in the QH can't be updated
+ * while the QH is active. Unlink it now;
+ * re-linking will call qh_refresh().
*/
- if (qh->qh_state == QH_STATE_LINKED) {
- if (eptype == USB_ENDPOINT_XFER_BULK) {
- unlink_async(ehci, qh);
- } else {
- intr_deschedule(ehci, qh);
- (void) qh_schedule(ehci, qh);
- }
+ if (eptype == USB_ENDPOINT_XFER_BULK) {
+ unlink_async(ehci, qh);
+ } else {
+ intr_deschedule(ehci, qh);
+ (void) qh_schedule(ehci, qh);
}
- spin_unlock_irq(&ehci->lock);
- schedule_timeout_uninterruptible(1);
- goto rescan;
}
}
- spin_unlock_irq(&ehci->lock);
+ spin_unlock_irqrestore(&ehci->lock, flags);
}
static int ehci_get_frame (struct usb_hcd *hcd)
diff --git a/drivers/usb/host/ehci-ixp4xx.c b/drivers/usb/host/ehci-ixp4xx.c
index a44bb4a..89b7c70 100644
--- a/drivers/usb/host/ehci-ixp4xx.c
+++ b/drivers/usb/host/ehci-ixp4xx.c
@@ -61,6 +61,8 @@
#endif
.relinquish_port = ehci_relinquish_port,
.port_handed_over = ehci_port_handed_over,
+
+ .clear_tt_buffer_complete = ehci_clear_tt_buffer_complete,
};
static int ixp4xx_ehci_probe(struct platform_device *pdev)
diff --git a/drivers/usb/host/ehci-orion.c b/drivers/usb/host/ehci-orion.c
index 770dd9a..dc2ac61 100644
--- a/drivers/usb/host/ehci-orion.c
+++ b/drivers/usb/host/ehci-orion.c
@@ -165,6 +165,8 @@
.bus_resume = ehci_bus_resume,
.relinquish_port = ehci_relinquish_port,
.port_handed_over = ehci_port_handed_over,
+
+ .clear_tt_buffer_complete = ehci_clear_tt_buffer_complete,
};
static void __init
diff --git a/drivers/usb/host/ehci-pci.c b/drivers/usb/host/ehci-pci.c
index f3683e1..c2f1b7d 100644
--- a/drivers/usb/host/ehci-pci.c
+++ b/drivers/usb/host/ehci-pci.c
@@ -404,6 +404,8 @@
.bus_resume = ehci_bus_resume,
.relinquish_port = ehci_relinquish_port,
.port_handed_over = ehci_port_handed_over,
+
+ .clear_tt_buffer_complete = ehci_clear_tt_buffer_complete,
};
/*-------------------------------------------------------------------------*/
diff --git a/drivers/usb/host/ehci-ppc-of.c b/drivers/usb/host/ehci-ppc-of.c
index fbd27228..36f96da 100644
--- a/drivers/usb/host/ehci-ppc-of.c
+++ b/drivers/usb/host/ehci-ppc-of.c
@@ -79,6 +79,8 @@
#endif
.relinquish_port = ehci_relinquish_port,
.port_handed_over = ehci_port_handed_over,
+
+ .clear_tt_buffer_complete = ehci_clear_tt_buffer_complete,
};
diff --git a/drivers/usb/host/ehci-ps3.c b/drivers/usb/host/ehci-ps3.c
index 93f7035..1dee33b 100644
--- a/drivers/usb/host/ehci-ps3.c
+++ b/drivers/usb/host/ehci-ps3.c
@@ -75,6 +75,8 @@
#endif
.relinquish_port = ehci_relinquish_port,
.port_handed_over = ehci_port_handed_over,
+
+ .clear_tt_buffer_complete = ehci_clear_tt_buffer_complete,
};
static int __devinit ps3_ehci_probe(struct ps3_system_bus_device *dev)
diff --git a/drivers/usb/host/ehci-q.c b/drivers/usb/host/ehci-q.c
index 3192f68..9a13847 100644
--- a/drivers/usb/host/ehci-q.c
+++ b/drivers/usb/host/ehci-q.c
@@ -93,6 +93,22 @@
qh->hw_qtd_next = QTD_NEXT(ehci, qtd->qtd_dma);
qh->hw_alt_next = EHCI_LIST_END(ehci);
+ /* Except for control endpoints, we make hardware maintain data
+ * toggle (like OHCI) ... here (re)initialize the toggle in the QH,
+ * and set the pseudo-toggle in udev. Only usb_clear_halt() will
+ * ever clear it.
+ */
+ if (!(qh->hw_info1 & cpu_to_hc32(ehci, 1 << 14))) {
+ unsigned is_out, epnum;
+
+ is_out = !(qtd->hw_token & cpu_to_hc32(ehci, 1 << 8));
+ epnum = (hc32_to_cpup(ehci, &qh->hw_info1) >> 8) & 0x0f;
+ if (unlikely (!usb_gettoggle (qh->dev, epnum, is_out))) {
+ qh->hw_token &= ~cpu_to_hc32(ehci, QTD_TOGGLE);
+ usb_settoggle (qh->dev, epnum, is_out, 1);
+ }
+ }
+
/* HC must see latest qtd and qh data before we clear ACTIVE+HALT */
wmb ();
qh->hw_token &= cpu_to_hc32(ehci, QTD_TOGGLE | QTD_STS_PING);
@@ -123,6 +139,55 @@
/*-------------------------------------------------------------------------*/
+static void qh_link_async(struct ehci_hcd *ehci, struct ehci_qh *qh);
+
+static void ehci_clear_tt_buffer_complete(struct usb_hcd *hcd,
+ struct usb_host_endpoint *ep)
+{
+ struct ehci_hcd *ehci = hcd_to_ehci(hcd);
+ struct ehci_qh *qh = ep->hcpriv;
+ unsigned long flags;
+
+ spin_lock_irqsave(&ehci->lock, flags);
+ qh->clearing_tt = 0;
+ if (qh->qh_state == QH_STATE_IDLE && !list_empty(&qh->qtd_list)
+ && HC_IS_RUNNING(hcd->state))
+ qh_link_async(ehci, qh);
+ spin_unlock_irqrestore(&ehci->lock, flags);
+}
+
+static void ehci_clear_tt_buffer(struct ehci_hcd *ehci, struct ehci_qh *qh,
+ struct urb *urb, u32 token)
+{
+
+ /* If an async split transaction gets an error or is unlinked,
+ * the TT buffer may be left in an indeterminate state. We
+ * have to clear the TT buffer.
+ *
+ * Note: this routine is never called for Isochronous transfers.
+ */
+ if (urb->dev->tt && !usb_pipeint(urb->pipe) && !qh->clearing_tt) {
+#ifdef DEBUG
+ struct usb_device *tt = urb->dev->tt->hub;
+ dev_dbg(&tt->dev,
+ "clear tt buffer port %d, a%d ep%d t%08x\n",
+ urb->dev->ttport, urb->dev->devnum,
+ usb_pipeendpoint(urb->pipe), token);
+#endif /* DEBUG */
+ if (!ehci_is_TDI(ehci)
+ || urb->dev->tt->hub !=
+ ehci_to_hcd(ehci)->self.root_hub) {
+ if (usb_hub_clear_tt_buffer(urb) == 0)
+ qh->clearing_tt = 1;
+ } else {
+
+ /* REVISIT ARC-derived cores don't clear the root
+ * hub TT buffer in this way...
+ */
+ }
+ }
+}
+
static int qtd_copy_status (
struct ehci_hcd *ehci,
struct urb *urb,
@@ -149,6 +214,14 @@
if (token & QTD_STS_BABBLE) {
/* FIXME "must" disable babbling device's port too */
status = -EOVERFLOW;
+ /* CERR nonzero + halt --> stall */
+ } else if (QTD_CERR(token)) {
+ status = -EPIPE;
+
+ /* In theory, more than one of the following bits can be set
+ * since they are sticky and the transaction is retried.
+ * Which to test first is rather arbitrary.
+ */
} else if (token & QTD_STS_MMF) {
/* fs/ls interrupt xfer missed the complete-split */
status = -EPROTO;
@@ -157,21 +230,15 @@
? -ENOSR /* hc couldn't read data */
: -ECOMM; /* hc couldn't write data */
} else if (token & QTD_STS_XACT) {
- /* timeout, bad crc, wrong PID, etc; retried */
- if (QTD_CERR (token))
- status = -EPIPE;
- else {
- ehci_dbg (ehci, "devpath %s ep%d%s 3strikes\n",
- urb->dev->devpath,
- usb_pipeendpoint (urb->pipe),
- usb_pipein (urb->pipe) ? "in" : "out");
- status = -EPROTO;
- }
- /* CERR nonzero + no errors + halt --> stall */
- } else if (QTD_CERR (token))
- status = -EPIPE;
- else /* unknown */
+ /* timeout, bad CRC, wrong PID, etc */
+ ehci_dbg(ehci, "devpath %s ep%d%s 3strikes\n",
+ urb->dev->devpath,
+ usb_pipeendpoint(urb->pipe),
+ usb_pipein(urb->pipe) ? "in" : "out");
status = -EPROTO;
+ } else { /* unknown */
+ status = -EPROTO;
+ }
ehci_vdbg (ehci,
"dev%d ep%d%s qtd token %08x --> status %d\n",
@@ -179,28 +246,6 @@
usb_pipeendpoint (urb->pipe),
usb_pipein (urb->pipe) ? "in" : "out",
token, status);
-
- /* if async CSPLIT failed, try cleaning out the TT buffer */
- if (status != -EPIPE
- && urb->dev->tt
- && !usb_pipeint(urb->pipe)
- && ((token & QTD_STS_MMF) != 0
- || QTD_CERR(token) == 0)
- && (!ehci_is_TDI(ehci)
- || urb->dev->tt->hub !=
- ehci_to_hcd(ehci)->self.root_hub)) {
-#ifdef DEBUG
- struct usb_device *tt = urb->dev->tt->hub;
- dev_dbg (&tt->dev,
- "clear tt buffer port %d, a%d ep%d t%08x\n",
- urb->dev->ttport, urb->dev->devnum,
- usb_pipeendpoint (urb->pipe), token);
-#endif /* DEBUG */
- /* REVISIT ARC-derived cores don't clear the root
- * hub TT buffer in this way...
- */
- usb_hub_tt_clear_buffer (urb->dev, urb->pipe);
- }
}
return status;
@@ -391,9 +436,16 @@
/* qh unlinked; token in overlay may be most current */
if (state == QH_STATE_IDLE
&& cpu_to_hc32(ehci, qtd->qtd_dma)
- == qh->hw_current)
+ == qh->hw_current) {
token = hc32_to_cpu(ehci, qh->hw_token);
+ /* An unlink may leave an incomplete
+ * async transaction in the TT buffer.
+ * We have to clear it.
+ */
+ ehci_clear_tt_buffer(ehci, qh, urb, token);
+ }
+
/* force halt for unlinked or blocked qh, so we'll
* patch the qh later and so that completions can't
* activate it while we "know" it's stopped.
@@ -419,6 +471,13 @@
&& (qtd->hw_alt_next
& EHCI_LIST_END(ehci)))
last_status = -EINPROGRESS;
+
+ /* As part of low/full-speed endpoint-halt processing
+ * we must clear the TT buffer (11.17.5).
+ */
+ if (unlikely(last_status != -EINPROGRESS &&
+ last_status != -EREMOTEIO))
+ ehci_clear_tt_buffer(ehci, qh, urb, token);
}
/* if we're removing something not at the queue head,
@@ -834,6 +893,7 @@
qh->qh_state = QH_STATE_IDLE;
qh->hw_info1 = cpu_to_hc32(ehci, info1);
qh->hw_info2 = cpu_to_hc32(ehci, info2);
+ usb_settoggle (urb->dev, usb_pipeendpoint (urb->pipe), !is_input, 1);
qh_refresh (ehci, qh);
return qh;
}
@@ -847,6 +907,10 @@
__hc32 dma = QH_NEXT(ehci, qh->qh_dma);
struct ehci_qh *head;
+ /* Don't link a QH if there's a Clear-TT-Buffer pending */
+ if (unlikely(qh->clearing_tt))
+ return;
+
/* (re)start the async schedule? */
head = ehci->async;
timer_action_done (ehci, TIMER_ASYNC_OFF);
@@ -864,7 +928,7 @@
}
}
- /* clear halt and maybe recover from silicon quirk */
+ /* clear halt and/or toggle; and maybe recover from silicon quirk */
if (qh->qh_state == QH_STATE_IDLE)
qh_refresh (ehci, qh);
diff --git a/drivers/usb/host/ehci-sched.c b/drivers/usb/host/ehci-sched.c
index 9d1babc..74f7f83 100644
--- a/drivers/usb/host/ehci-sched.c
+++ b/drivers/usb/host/ehci-sched.c
@@ -1619,11 +1619,14 @@
desc->status = -EPROTO;
/* HC need not update length with this error */
- if (!(t & EHCI_ISOC_BABBLE))
- desc->actual_length = EHCI_ITD_LENGTH (t);
+ if (!(t & EHCI_ISOC_BABBLE)) {
+ desc->actual_length = EHCI_ITD_LENGTH(t);
+ urb->actual_length += desc->actual_length;
+ }
} else if (likely ((t & EHCI_ISOC_ACTIVE) == 0)) {
desc->status = 0;
- desc->actual_length = EHCI_ITD_LENGTH (t);
+ desc->actual_length = EHCI_ITD_LENGTH(t);
+ urb->actual_length += desc->actual_length;
} else {
/* URB was too late */
desc->status = -EXDEV;
@@ -2014,7 +2017,8 @@
desc->status = -EPROTO;
} else {
desc->status = 0;
- desc->actual_length = desc->length - SITD_LENGTH (t);
+ desc->actual_length = desc->length - SITD_LENGTH(t);
+ urb->actual_length += desc->actual_length;
}
stream->depth -= stream->interval << 3;
diff --git a/drivers/usb/host/ehci.h b/drivers/usb/host/ehci.h
index 90ad339..2bfff30 100644
--- a/drivers/usb/host/ehci.h
+++ b/drivers/usb/host/ehci.h
@@ -354,7 +354,9 @@
unsigned short period; /* polling interval */
unsigned short start; /* where polling starts */
#define NO_FRAME ((unsigned short)~0) /* pick new start */
+
struct usb_device *dev; /* access to TT */
+ unsigned clearing_tt:1; /* Clear-TT-Buf in progress */
} __attribute__ ((aligned (32)));
/*-------------------------------------------------------------------------*/
diff --git a/drivers/usb/host/fhci-sched.c b/drivers/usb/host/fhci-sched.c
index bb63b68..62a226b 100644
--- a/drivers/usb/host/fhci-sched.c
+++ b/drivers/usb/host/fhci-sched.c
@@ -576,9 +576,7 @@
out_be16(&usb->fhci->regs->usb_event,
usb->saved_msk);
} else if (usb->port_status == FHCI_PORT_DISABLED) {
- if (fhci_ioports_check_bus_state(fhci) == 1 &&
- usb->port_status != FHCI_PORT_LOW &&
- usb->port_status != FHCI_PORT_FULL)
+ if (fhci_ioports_check_bus_state(fhci) == 1)
fhci_device_connected_interrupt(fhci);
}
usb_er &= ~USB_E_RESET_MASK;
@@ -605,9 +603,7 @@
}
if (usb_er & USB_E_IDLE_MASK) {
- if (usb->port_status == FHCI_PORT_DISABLED &&
- usb->port_status != FHCI_PORT_LOW &&
- usb->port_status != FHCI_PORT_FULL) {
+ if (usb->port_status == FHCI_PORT_DISABLED) {
usb_er &= ~USB_E_RESET_MASK;
fhci_device_connected_interrupt(fhci);
} else if (usb->port_status ==
diff --git a/drivers/usb/host/isp1760-if.c b/drivers/usb/host/isp1760-if.c
index 3fa3a17..d4feebf 100644
--- a/drivers/usb/host/isp1760-if.c
+++ b/drivers/usb/host/isp1760-if.c
@@ -361,7 +361,7 @@
static struct platform_driver isp1760_plat_driver = {
.probe = isp1760_plat_probe,
- .remove = isp1760_plat_remove,
+ .remove = __devexit_p(isp1760_plat_remove),
.driver = {
.name = "isp1760",
},
diff --git a/drivers/usb/host/r8a66597-hcd.c b/drivers/usb/host/r8a66597-hcd.c
index 56976cc..e18f749 100644
--- a/drivers/usb/host/r8a66597-hcd.c
+++ b/drivers/usb/host/r8a66597-hcd.c
@@ -26,7 +26,6 @@
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/sched.h>
-#include <linux/smp_lock.h>
#include <linux/errno.h>
#include <linux/init.h>
#include <linux/timer.h>
diff --git a/drivers/usb/misc/iowarrior.c b/drivers/usb/misc/iowarrior.c
index 3c5fe5c..90e1a8d 100644
--- a/drivers/usb/misc/iowarrior.c
+++ b/drivers/usb/misc/iowarrior.c
@@ -18,6 +18,7 @@
#include <linux/init.h>
#include <linux/slab.h>
#include <linux/sched.h>
+#include <linux/smp_lock.h>
#include <linux/poll.h>
#include <linux/usb/iowarrior.h>
diff --git a/drivers/usb/misc/rio500.c b/drivers/usb/misc/rio500.c
index deb95bb..d645f38 100644
--- a/drivers/usb/misc/rio500.c
+++ b/drivers/usb/misc/rio500.c
@@ -32,6 +32,7 @@
#include <linux/kernel.h>
#include <linux/signal.h>
#include <linux/sched.h>
+#include <linux/smp_lock.h>
#include <linux/errno.h>
#include <linux/random.h>
#include <linux/poll.h>
diff --git a/drivers/usb/misc/usblcd.c b/drivers/usb/misc/usblcd.c
index e0ff9cc..29092b8 100644
--- a/drivers/usb/misc/usblcd.c
+++ b/drivers/usb/misc/usblcd.c
@@ -16,6 +16,7 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/slab.h>
+#include <linux/smp_lock.h>
#include <linux/errno.h>
#include <linux/mutex.h>
#include <asm/uaccess.h>
diff --git a/drivers/usb/mon/mon_bin.c b/drivers/usb/mon/mon_bin.c
index f8d9045..0f7a30b 100644
--- a/drivers/usb/mon/mon_bin.c
+++ b/drivers/usb/mon/mon_bin.c
@@ -1261,7 +1261,7 @@
return -ENOMEM;
}
map[n].ptr = (unsigned char *) vaddr;
- map[n].pg = virt_to_page(vaddr);
+ map[n].pg = virt_to_page((void *) vaddr);
}
return 0;
}
diff --git a/drivers/usb/musb/cppi_dma.h b/drivers/usb/musb/cppi_dma.h
index 8a39de3..59bf949 100644
--- a/drivers/usb/musb/cppi_dma.h
+++ b/drivers/usb/musb/cppi_dma.h
@@ -5,7 +5,6 @@
#include <linux/slab.h>
#include <linux/list.h>
-#include <linux/smp_lock.h>
#include <linux/errno.h>
#include <linux/dmapool.h>
diff --git a/drivers/usb/musb/davinci.c b/drivers/usb/musb/davinci.c
index 180d7da..e16ff60 100644
--- a/drivers/usb/musb/davinci.c
+++ b/drivers/usb/musb/davinci.c
@@ -35,13 +35,14 @@
#include <mach/hardware.h>
#include <mach/memory.h>
#include <mach/gpio.h>
+#include <mach/cputype.h>
#include <asm/mach-types.h>
#include "musb_core.h"
#ifdef CONFIG_MACH_DAVINCI_EVM
-#define GPIO_nVBUS_DRV 87
+#define GPIO_nVBUS_DRV 144
#endif
#include "davinci.h"
@@ -329,7 +330,6 @@
mod_timer(&otg_workaround, jiffies + POLL_SECONDS * HZ);
WARNING("VBUS error workaround (delay coming)\n");
} else if (is_host_enabled(musb) && drvvbus) {
- musb->is_active = 1;
MUSB_HST_MODE(musb);
musb->xceiv->default_a = 1;
musb->xceiv->state = OTG_STATE_A_WAIT_VRISE;
@@ -343,7 +343,9 @@
portstate(musb->port1_status &= ~USB_PORT_STAT_POWER);
}
- /* NOTE: this must complete poweron within 100 msec */
+ /* NOTE: this must complete poweron within 100 msec
+ * (OTG_TIME_A_WAIT_VRISE) but we don't check for that.
+ */
davinci_source_power(musb, drvvbus, 0);
DBG(2, "VBUS %s (%s)%s, devctl %02x\n",
drvvbus ? "on" : "off",
@@ -411,6 +413,21 @@
__raw_writel(phy_ctrl, USB_PHY_CTRL);
}
+ /* On dm355, the default-A state machine needs DRVVBUS control.
+ * If we won't be a host, there's no need to turn it on.
+ */
+ if (cpu_is_davinci_dm355()) {
+ u32 deepsleep = __raw_readl(DM355_DEEPSLEEP);
+
+ if (is_host_enabled(musb)) {
+ deepsleep &= ~DRVVBUS_OVERRIDE;
+ } else {
+ deepsleep &= ~DRVVBUS_FORCE;
+ deepsleep |= DRVVBUS_OVERRIDE;
+ }
+ __raw_writel(deepsleep, DM355_DEEPSLEEP);
+ }
+
/* reset the controller */
musb_writel(tibase, DAVINCI_USB_CTRL_REG, 0x1);
@@ -437,6 +454,15 @@
if (is_host_enabled(musb))
del_timer_sync(&otg_workaround);
+ /* force VBUS off */
+ if (cpu_is_davinci_dm355()) {
+ u32 deepsleep = __raw_readl(DM355_DEEPSLEEP);
+
+ deepsleep &= ~DRVVBUS_FORCE;
+ deepsleep |= DRVVBUS_OVERRIDE;
+ __raw_writel(deepsleep, DM355_DEEPSLEEP);
+ }
+
davinci_source_power(musb, 0 /*off*/, 1);
/* delay, to avoid problems with module reload */
diff --git a/drivers/usb/musb/musb_core.h b/drivers/usb/musb/musb_core.h
index f3772ca..381d648 100644
--- a/drivers/usb/musb/musb_core.h
+++ b/drivers/usb/musb/musb_core.h
@@ -38,7 +38,6 @@
#include <linux/slab.h>
#include <linux/list.h>
#include <linux/interrupt.h>
-#include <linux/smp_lock.h>
#include <linux/errno.h>
#include <linux/timer.h>
#include <linux/clk.h>
diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c
index 94a2a350..cf94511 100644
--- a/drivers/usb/musb/musb_host.c
+++ b/drivers/usb/musb/musb_host.c
@@ -373,7 +373,7 @@
musb_save_toggle(qh, is_in, urb);
break;
case USB_ENDPOINT_XFER_ISOC:
- if (urb->error_count)
+ if (status == 0 && urb->error_count)
status = -EXDEV;
break;
}
@@ -2235,13 +2235,30 @@
static int musb_bus_suspend(struct usb_hcd *hcd)
{
struct musb *musb = hcd_to_musb(hcd);
+ u8 devctl;
- if (musb->xceiv->state == OTG_STATE_A_SUSPEND)
+ if (!is_host_active(musb))
return 0;
- if (is_host_active(musb) && musb->is_active) {
- WARNING("trying to suspend as %s is_active=%i\n",
- otg_state_string(musb), musb->is_active);
+ switch (musb->xceiv->state) {
+ case OTG_STATE_A_SUSPEND:
+ return 0;
+ case OTG_STATE_A_WAIT_VRISE:
+ /* ID could be grounded even if there's no device
+ * on the other end of the cable. NOTE that the
+ * A_WAIT_VRISE timers are messy with MUSB...
+ */
+ devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
+ if ((devctl & MUSB_DEVCTL_VBUS) == MUSB_DEVCTL_VBUS)
+ musb->xceiv->state = OTG_STATE_A_WAIT_BCON;
+ break;
+ default:
+ break;
+ }
+
+ if (musb->is_active) {
+ WARNING("trying to suspend as %s while active\n",
+ otg_state_string(musb));
return -EBUSY;
} else
return 0;
diff --git a/drivers/usb/otg/Kconfig b/drivers/usb/otg/Kconfig
index 69feeec..aa884d0 100644
--- a/drivers/usb/otg/Kconfig
+++ b/drivers/usb/otg/Kconfig
@@ -59,18 +59,4 @@
built-in with usb ip or which are autonomous and doesn't require any
phy programming such as ISP1x04 etc.
-config USB_LANGWELL_OTG
- tristate "Intel Langwell USB OTG dual-role support"
- depends on USB && MRST
- select USB_OTG
- select USB_OTG_UTILS
- help
- Say Y here if you want to build Intel Langwell USB OTG
- transciever driver in kernel. This driver implements role
- switch between EHCI host driver and Langwell USB OTG
- client driver.
-
- To compile this driver as a module, choose M here: the
- module will be called langwell_otg.
-
endif # USB || OTG
diff --git a/drivers/usb/otg/Makefile b/drivers/usb/otg/Makefile
index 6d1abdd..2081678 100644
--- a/drivers/usb/otg/Makefile
+++ b/drivers/usb/otg/Makefile
@@ -9,7 +9,6 @@
obj-$(CONFIG_USB_GPIO_VBUS) += gpio_vbus.o
obj-$(CONFIG_ISP1301_OMAP) += isp1301_omap.o
obj-$(CONFIG_TWL4030_USB) += twl4030-usb.o
-obj-$(CONFIG_USB_LANGWELL_OTG) += langwell_otg.o
obj-$(CONFIG_NOP_USB_XCEIV) += nop-usb-xceiv.o
ccflags-$(CONFIG_USB_DEBUG) += -DDEBUG
diff --git a/drivers/usb/otg/langwell_otg.c b/drivers/usb/otg/langwell_otg.c
deleted file mode 100644
index 6f628d0..0000000
--- a/drivers/usb/otg/langwell_otg.c
+++ /dev/null
@@ -1,1915 +0,0 @@
-/*
- * Intel Langwell USB OTG transceiver driver
- * Copyright (C) 2008 - 2009, Intel Corporation.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
- *
- */
-/* This driver helps to switch Langwell OTG controller function between host
- * and peripheral. It works with EHCI driver and Langwell client controller
- * driver together.
- */
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/pci.h>
-#include <linux/errno.h>
-#include <linux/interrupt.h>
-#include <linux/kernel.h>
-#include <linux/device.h>
-#include <linux/moduleparam.h>
-#include <linux/usb/ch9.h>
-#include <linux/usb/gadget.h>
-#include <linux/usb.h>
-#include <linux/usb/otg.h>
-#include <linux/notifier.h>
-#include <asm/ipc_defs.h>
-#include <linux/delay.h>
-#include "../core/hcd.h"
-
-#include <linux/usb/langwell_otg.h>
-
-#define DRIVER_DESC "Intel Langwell USB OTG transceiver driver"
-#define DRIVER_VERSION "3.0.0.32L.0002"
-
-MODULE_DESCRIPTION(DRIVER_DESC);
-MODULE_AUTHOR("Henry Yuan <hang.yuan@intel.com>, Hao Wu <hao.wu@intel.com>");
-MODULE_VERSION(DRIVER_VERSION);
-MODULE_LICENSE("GPL");
-
-static const char driver_name[] = "langwell_otg";
-
-static int langwell_otg_probe(struct pci_dev *pdev,
- const struct pci_device_id *id);
-static void langwell_otg_remove(struct pci_dev *pdev);
-static int langwell_otg_suspend(struct pci_dev *pdev, pm_message_t message);
-static int langwell_otg_resume(struct pci_dev *pdev);
-
-static int langwell_otg_set_host(struct otg_transceiver *otg,
- struct usb_bus *host);
-static int langwell_otg_set_peripheral(struct otg_transceiver *otg,
- struct usb_gadget *gadget);
-static int langwell_otg_start_srp(struct otg_transceiver *otg);
-
-static const struct pci_device_id pci_ids[] = {{
- .class = ((PCI_CLASS_SERIAL_USB << 8) | 0xfe),
- .class_mask = ~0,
- .vendor = 0x8086,
- .device = 0x0811,
- .subvendor = PCI_ANY_ID,
- .subdevice = PCI_ANY_ID,
-}, { /* end: all zeroes */ }
-};
-
-static struct pci_driver otg_pci_driver = {
- .name = (char *) driver_name,
- .id_table = pci_ids,
-
- .probe = langwell_otg_probe,
- .remove = langwell_otg_remove,
-
- .suspend = langwell_otg_suspend,
- .resume = langwell_otg_resume,
-};
-
-static const char *state_string(enum usb_otg_state state)
-{
- switch (state) {
- case OTG_STATE_A_IDLE:
- return "a_idle";
- case OTG_STATE_A_WAIT_VRISE:
- return "a_wait_vrise";
- case OTG_STATE_A_WAIT_BCON:
- return "a_wait_bcon";
- case OTG_STATE_A_HOST:
- return "a_host";
- case OTG_STATE_A_SUSPEND:
- return "a_suspend";
- case OTG_STATE_A_PERIPHERAL:
- return "a_peripheral";
- case OTG_STATE_A_WAIT_VFALL:
- return "a_wait_vfall";
- case OTG_STATE_A_VBUS_ERR:
- return "a_vbus_err";
- case OTG_STATE_B_IDLE:
- return "b_idle";
- case OTG_STATE_B_SRP_INIT:
- return "b_srp_init";
- case OTG_STATE_B_PERIPHERAL:
- return "b_peripheral";
- case OTG_STATE_B_WAIT_ACON:
- return "b_wait_acon";
- case OTG_STATE_B_HOST:
- return "b_host";
- default:
- return "UNDEFINED";
- }
-}
-
-/* HSM timers */
-static inline struct langwell_otg_timer *otg_timer_initializer
-(void (*function)(unsigned long), unsigned long expires, unsigned long data)
-{
- struct langwell_otg_timer *timer;
- timer = kmalloc(sizeof(struct langwell_otg_timer), GFP_KERNEL);
- timer->function = function;
- timer->expires = expires;
- timer->data = data;
- return timer;
-}
-
-static struct langwell_otg_timer *a_wait_vrise_tmr, *a_wait_bcon_tmr,
- *a_aidl_bdis_tmr, *b_ase0_brst_tmr, *b_se0_srp_tmr, *b_srp_res_tmr,
- *b_bus_suspend_tmr;
-
-static struct list_head active_timers;
-
-static struct langwell_otg *the_transceiver;
-
-/* host/client notify transceiver when event affects HNP state */
-void langwell_update_transceiver()
-{
- otg_dbg("transceiver driver is notified\n");
- queue_work(the_transceiver->qwork, &the_transceiver->work);
-}
-EXPORT_SYMBOL(langwell_update_transceiver);
-
-static int langwell_otg_set_host(struct otg_transceiver *otg,
- struct usb_bus *host)
-{
- otg->host = host;
-
- return 0;
-}
-
-static int langwell_otg_set_peripheral(struct otg_transceiver *otg,
- struct usb_gadget *gadget)
-{
- otg->gadget = gadget;
-
- return 0;
-}
-
-static int langwell_otg_set_power(struct otg_transceiver *otg,
- unsigned mA)
-{
- return 0;
-}
-
-/* A-device drives vbus, controlled through PMIC CHRGCNTL register*/
-static void langwell_otg_drv_vbus(int on)
-{
- struct ipc_pmic_reg_data pmic_data = {0};
- struct ipc_pmic_reg_data battery_data;
-
- /* Check if battery is attached or not */
- battery_data.pmic_reg_data[0].register_address = 0xd2;
- battery_data.ioc = 0;
- battery_data.num_entries = 1;
- if (ipc_pmic_register_read(&battery_data)) {
- otg_dbg("Failed to read PMIC register 0xd2.\n");
- return;
- }
-
- if ((battery_data.pmic_reg_data[0].value & 0x20) == 0) {
- otg_dbg("no battery attached\n");
- return;
- }
-
- /* Workaround for battery attachment issue */
- if (battery_data.pmic_reg_data[0].value == 0x34) {
- otg_dbg("battery \n");
- return;
- }
-
- otg_dbg("battery attached\n");
-
- pmic_data.ioc = 0;
- pmic_data.pmic_reg_data[0].register_address = 0xD4;
- pmic_data.num_entries = 1;
- if (on)
- pmic_data.pmic_reg_data[0].value = 0x20;
- else
- pmic_data.pmic_reg_data[0].value = 0xc0;
-
- if (ipc_pmic_register_write(&pmic_data, TRUE))
- otg_dbg("Failed to write PMIC.\n");
-
-}
-
-/* charge vbus or discharge vbus through a resistor to ground */
-static void langwell_otg_chrg_vbus(int on)
-{
-
- u32 val;
-
- val = readl(the_transceiver->regs + CI_OTGSC);
-
- if (on)
- writel((val & ~OTGSC_INTSTS_MASK) | OTGSC_VC,
- the_transceiver->regs + CI_OTGSC);
- else
- writel((val & ~OTGSC_INTSTS_MASK) | OTGSC_VD,
- the_transceiver->regs + CI_OTGSC);
-
-}
-
-/* Start SRP */
-static int langwell_otg_start_srp(struct otg_transceiver *otg)
-{
- u32 val;
-
- otg_dbg("Start SRP ->\n");
-
- val = readl(the_transceiver->regs + CI_OTGSC);
-
- writel((val & ~OTGSC_INTSTS_MASK) | OTGSC_HADP,
- the_transceiver->regs + CI_OTGSC);
-
- /* Check if the data plus is finished or not */
- msleep(8);
- val = readl(the_transceiver->regs + CI_OTGSC);
- if (val & (OTGSC_HADP | OTGSC_DP))
- otg_dbg("DataLine SRP Error\n");
-
- /* FIXME: VBus SRP */
-
- return 0;
-}
-
-
-/* stop SOF via bus_suspend */
-static void langwell_otg_loc_sof(int on)
-{
- struct usb_hcd *hcd;
- int err;
-
- otg_dbg("loc_sof -> %d\n", on);
-
- hcd = bus_to_hcd(the_transceiver->otg.host);
- if (on)
- err = hcd->driver->bus_resume(hcd);
- else
- err = hcd->driver->bus_suspend(hcd);
-
- if (err)
- otg_dbg("Failed to resume/suspend bus - %d\n", err);
-}
-
-static void langwell_otg_phy_low_power(int on)
-{
- u32 val;
-
- otg_dbg("phy low power mode-> %d\n", on);
-
- val = readl(the_transceiver->regs + CI_HOSTPC1);
- if (on)
- writel(val | HOSTPC1_PHCD, the_transceiver->regs + CI_HOSTPC1);
- else
- writel(val & ~HOSTPC1_PHCD, the_transceiver->regs + CI_HOSTPC1);
-}
-
-/* Enable/Disable OTG interrupt */
-static void langwell_otg_intr(int on)
-{
- u32 val;
-
- otg_dbg("interrupt -> %d\n", on);
-
- val = readl(the_transceiver->regs + CI_OTGSC);
- if (on) {
- val = val | (OTGSC_INTEN_MASK | OTGSC_IDPU);
- writel(val, the_transceiver->regs + CI_OTGSC);
- } else {
- val = val & ~(OTGSC_INTEN_MASK | OTGSC_IDPU);
- writel(val, the_transceiver->regs + CI_OTGSC);
- }
-}
-
-/* set HAAR: Hardware Assist Auto-Reset */
-static void langwell_otg_HAAR(int on)
-{
- u32 val;
-
- otg_dbg("HAAR -> %d\n", on);
-
- val = readl(the_transceiver->regs + CI_OTGSC);
- if (on)
- writel((val & ~OTGSC_INTSTS_MASK) | OTGSC_HAAR,
- the_transceiver->regs + CI_OTGSC);
- else
- writel((val & ~OTGSC_INTSTS_MASK) & ~OTGSC_HAAR,
- the_transceiver->regs + CI_OTGSC);
-}
-
-/* set HABA: Hardware Assist B-Disconnect to A-Connect */
-static void langwell_otg_HABA(int on)
-{
- u32 val;
-
- otg_dbg("HABA -> %d\n", on);
-
- val = readl(the_transceiver->regs + CI_OTGSC);
- if (on)
- writel((val & ~OTGSC_INTSTS_MASK) | OTGSC_HABA,
- the_transceiver->regs + CI_OTGSC);
- else
- writel((val & ~OTGSC_INTSTS_MASK) & ~OTGSC_HABA,
- the_transceiver->regs + CI_OTGSC);
-}
-
-static int langwell_otg_check_se0_srp(int on)
-{
- u32 val;
-
- int delay_time = TB_SE0_SRP * 10; /* step is 100us */
-
- otg_dbg("check_se0_srp -> \n");
-
- do {
- udelay(100);
- if (!delay_time--)
- break;
- val = readl(the_transceiver->regs + CI_PORTSC1);
- val &= PORTSC_LS;
- } while (!val);
-
- otg_dbg("check_se0_srp <- \n");
- return val;
-}
-
-/* The timeout callback function to set time out bit */
-static void set_tmout(unsigned long indicator)
-{
- *(int *)indicator = 1;
-}
-
-void langwell_otg_nsf_msg(unsigned long indicator)
-{
- switch (indicator) {
- case 2:
- case 4:
- case 6:
- case 7:
- printk(KERN_ERR "OTG:NSF-%lu - deivce not responding\n",
- indicator);
- break;
- case 3:
- printk(KERN_ERR "OTG:NSF-%lu - deivce not supported\n",
- indicator);
- break;
- default:
- printk(KERN_ERR "Do not have this kind of NSF\n");
- break;
- }
-}
-
-/* Initialize timers */
-static void langwell_otg_init_timers(struct otg_hsm *hsm)
-{
- /* HSM used timers */
- a_wait_vrise_tmr = otg_timer_initializer(&set_tmout, TA_WAIT_VRISE,
- (unsigned long)&hsm->a_wait_vrise_tmout);
- a_wait_bcon_tmr = otg_timer_initializer(&set_tmout, TA_WAIT_BCON,
- (unsigned long)&hsm->a_wait_bcon_tmout);
- a_aidl_bdis_tmr = otg_timer_initializer(&set_tmout, TA_AIDL_BDIS,
- (unsigned long)&hsm->a_aidl_bdis_tmout);
- b_ase0_brst_tmr = otg_timer_initializer(&set_tmout, TB_ASE0_BRST,
- (unsigned long)&hsm->b_ase0_brst_tmout);
- b_se0_srp_tmr = otg_timer_initializer(&set_tmout, TB_SE0_SRP,
- (unsigned long)&hsm->b_se0_srp);
- b_srp_res_tmr = otg_timer_initializer(&set_tmout, TB_SRP_RES,
- (unsigned long)&hsm->b_srp_res_tmout);
- b_bus_suspend_tmr = otg_timer_initializer(&set_tmout, TB_BUS_SUSPEND,
- (unsigned long)&hsm->b_bus_suspend_tmout);
-}
-
-/* Free timers */
-static void langwell_otg_free_timers(void)
-{
- kfree(a_wait_vrise_tmr);
- kfree(a_wait_bcon_tmr);
- kfree(a_aidl_bdis_tmr);
- kfree(b_ase0_brst_tmr);
- kfree(b_se0_srp_tmr);
- kfree(b_srp_res_tmr);
- kfree(b_bus_suspend_tmr);
-}
-
-/* Add timer to timer list */
-static void langwell_otg_add_timer(void *gtimer)
-{
- struct langwell_otg_timer *timer = (struct langwell_otg_timer *)gtimer;
- struct langwell_otg_timer *tmp_timer;
- u32 val32;
-
- /* Check if the timer is already in the active list,
- * if so update timer count
- */
- list_for_each_entry(tmp_timer, &active_timers, list)
- if (tmp_timer == timer) {
- timer->count = timer->expires;
- return;
- }
- timer->count = timer->expires;
-
- if (list_empty(&active_timers)) {
- val32 = readl(the_transceiver->regs + CI_OTGSC);
- writel(val32 | OTGSC_1MSE, the_transceiver->regs + CI_OTGSC);
- }
-
- list_add_tail(&timer->list, &active_timers);
-}
-
-/* Remove timer from the timer list; clear timeout status */
-static void langwell_otg_del_timer(void *gtimer)
-{
- struct langwell_otg_timer *timer = (struct langwell_otg_timer *)gtimer;
- struct langwell_otg_timer *tmp_timer, *del_tmp;
- u32 val32;
-
- list_for_each_entry_safe(tmp_timer, del_tmp, &active_timers, list)
- if (tmp_timer == timer)
- list_del(&timer->list);
-
- if (list_empty(&active_timers)) {
- val32 = readl(the_transceiver->regs + CI_OTGSC);
- writel(val32 & ~OTGSC_1MSE, the_transceiver->regs + CI_OTGSC);
- }
-}
-
-/* Reduce timer count by 1, and find timeout conditions.*/
-static int langwell_otg_tick_timer(u32 *int_sts)
-{
- struct langwell_otg_timer *tmp_timer, *del_tmp;
- int expired = 0;
-
- list_for_each_entry_safe(tmp_timer, del_tmp, &active_timers, list) {
- tmp_timer->count--;
- /* check if timer expires */
- if (!tmp_timer->count) {
- list_del(&tmp_timer->list);
- tmp_timer->function(tmp_timer->data);
- expired = 1;
- }
- }
-
- if (list_empty(&active_timers)) {
- otg_dbg("tick timer: disable 1ms int\n");
- *int_sts = *int_sts & ~OTGSC_1MSE;
- }
- return expired;
-}
-
-static void reset_otg(void)
-{
- u32 val;
- int delay_time = 1000;
-
- otg_dbg("reseting OTG controller ...\n");
- val = readl(the_transceiver->regs + CI_USBCMD);
- writel(val | USBCMD_RST, the_transceiver->regs + CI_USBCMD);
- do {
- udelay(100);
- if (!delay_time--)
- otg_dbg("reset timeout\n");
- val = readl(the_transceiver->regs + CI_USBCMD);
- val &= USBCMD_RST;
- } while (val != 0);
- otg_dbg("reset done.\n");
-}
-
-static void set_host_mode(void)
-{
- u32 val;
-
- reset_otg();
- val = readl(the_transceiver->regs + CI_USBMODE);
- val = (val & (~USBMODE_CM)) | USBMODE_HOST;
- writel(val, the_transceiver->regs + CI_USBMODE);
-}
-
-static void set_client_mode(void)
-{
- u32 val;
-
- reset_otg();
- val = readl(the_transceiver->regs + CI_USBMODE);
- val = (val & (~USBMODE_CM)) | USBMODE_DEVICE;
- writel(val, the_transceiver->regs + CI_USBMODE);
-}
-
-static void init_hsm(void)
-{
- struct langwell_otg *langwell = the_transceiver;
- u32 val32;
-
- /* read OTGSC after reset */
- val32 = readl(langwell->regs + CI_OTGSC);
- otg_dbg("%s: OTGSC init value = 0x%x\n", __func__, val32);
-
- /* set init state */
- if (val32 & OTGSC_ID) {
- langwell->hsm.id = 1;
- langwell->otg.default_a = 0;
- set_client_mode();
- langwell->otg.state = OTG_STATE_B_IDLE;
- langwell_otg_drv_vbus(0);
- } else {
- langwell->hsm.id = 0;
- langwell->otg.default_a = 1;
- set_host_mode();
- langwell->otg.state = OTG_STATE_A_IDLE;
- }
-
- /* set session indicator */
- if (val32 & OTGSC_BSE)
- langwell->hsm.b_sess_end = 1;
- if (val32 & OTGSC_BSV)
- langwell->hsm.b_sess_vld = 1;
- if (val32 & OTGSC_ASV)
- langwell->hsm.a_sess_vld = 1;
- if (val32 & OTGSC_AVV)
- langwell->hsm.a_vbus_vld = 1;
-
- /* defautly power the bus */
- langwell->hsm.a_bus_req = 1;
- langwell->hsm.a_bus_drop = 0;
- /* defautly don't request bus as B device */
- langwell->hsm.b_bus_req = 0;
- /* no system error */
- langwell->hsm.a_clr_err = 0;
-}
-
-static irqreturn_t otg_dummy_irq(int irq, void *_dev)
-{
- void __iomem *reg_base = _dev;
- u32 val;
- u32 int_mask = 0;
-
- val = readl(reg_base + CI_USBMODE);
- if ((val & USBMODE_CM) != USBMODE_DEVICE)
- return IRQ_NONE;
-
- val = readl(reg_base + CI_USBSTS);
- int_mask = val & INTR_DUMMY_MASK;
-
- if (int_mask == 0)
- return IRQ_NONE;
-
- /* clear hsm.b_conn here since host driver can't detect it
- * otg_dummy_irq called means B-disconnect happened.
- */
- if (the_transceiver->hsm.b_conn) {
- the_transceiver->hsm.b_conn = 0;
- if (spin_trylock(&the_transceiver->wq_lock)) {
- queue_work(the_transceiver->qwork,
- &the_transceiver->work);
- spin_unlock(&the_transceiver->wq_lock);
- }
- }
- /* Clear interrupts */
- writel(int_mask, reg_base + CI_USBSTS);
- return IRQ_HANDLED;
-}
-
-static irqreturn_t otg_irq(int irq, void *_dev)
-{
- struct langwell_otg *langwell = _dev;
- u32 int_sts, int_en;
- u32 int_mask = 0;
- int flag = 0;
-
- int_sts = readl(langwell->regs + CI_OTGSC);
- int_en = (int_sts & OTGSC_INTEN_MASK) >> 8;
- int_mask = int_sts & int_en;
- if (int_mask == 0)
- return IRQ_NONE;
-
- if (int_mask & OTGSC_IDIS) {
- otg_dbg("%s: id change int\n", __func__);
- langwell->hsm.id = (int_sts & OTGSC_ID) ? 1 : 0;
- flag = 1;
- }
- if (int_mask & OTGSC_DPIS) {
- otg_dbg("%s: data pulse int\n", __func__);
- langwell->hsm.a_srp_det = (int_sts & OTGSC_DPS) ? 1 : 0;
- flag = 1;
- }
- if (int_mask & OTGSC_BSEIS) {
- otg_dbg("%s: b session end int\n", __func__);
- langwell->hsm.b_sess_end = (int_sts & OTGSC_BSE) ? 1 : 0;
- flag = 1;
- }
- if (int_mask & OTGSC_BSVIS) {
- otg_dbg("%s: b session valid int\n", __func__);
- langwell->hsm.b_sess_vld = (int_sts & OTGSC_BSV) ? 1 : 0;
- flag = 1;
- }
- if (int_mask & OTGSC_ASVIS) {
- otg_dbg("%s: a session valid int\n", __func__);
- langwell->hsm.a_sess_vld = (int_sts & OTGSC_ASV) ? 1 : 0;
- flag = 1;
- }
- if (int_mask & OTGSC_AVVIS) {
- otg_dbg("%s: a vbus valid int\n", __func__);
- langwell->hsm.a_vbus_vld = (int_sts & OTGSC_AVV) ? 1 : 0;
- flag = 1;
- }
-
- if (int_mask & OTGSC_1MSS) {
- /* need to schedule otg_work if any timer is expired */
- if (langwell_otg_tick_timer(&int_sts))
- flag = 1;
- }
-
- writel((int_sts & ~OTGSC_INTSTS_MASK) | int_mask,
- langwell->regs + CI_OTGSC);
- if (flag)
- queue_work(langwell->qwork, &langwell->work);
-
- return IRQ_HANDLED;
-}
-
-static void langwell_otg_work(struct work_struct *work)
-{
- struct langwell_otg *langwell = container_of(work,
- struct langwell_otg, work);
- int retval;
-
- otg_dbg("%s: old state = %s\n", __func__,
- state_string(langwell->otg.state));
-
- switch (langwell->otg.state) {
- case OTG_STATE_UNDEFINED:
- case OTG_STATE_B_IDLE:
- if (!langwell->hsm.id) {
- langwell_otg_del_timer(b_srp_res_tmr);
- langwell->otg.default_a = 1;
- langwell->hsm.a_srp_det = 0;
-
- langwell_otg_chrg_vbus(0);
- langwell_otg_drv_vbus(0);
-
- set_host_mode();
- langwell->otg.state = OTG_STATE_A_IDLE;
- queue_work(langwell->qwork, &langwell->work);
- } else if (langwell->hsm.b_srp_res_tmout) {
- langwell->hsm.b_srp_res_tmout = 0;
- langwell->hsm.b_bus_req = 0;
- langwell_otg_nsf_msg(6);
- } else if (langwell->hsm.b_sess_vld) {
- langwell_otg_del_timer(b_srp_res_tmr);
- langwell->hsm.b_sess_end = 0;
- langwell->hsm.a_bus_suspend = 0;
-
- langwell_otg_chrg_vbus(0);
- if (langwell->client_ops) {
- langwell->client_ops->resume(langwell->pdev);
- langwell->otg.state = OTG_STATE_B_PERIPHERAL;
- } else
- otg_dbg("client driver not loaded.\n");
-
- } else if (langwell->hsm.b_bus_req &&
- (langwell->hsm.b_sess_end)) {
- /* workaround for b_se0_srp detection */
- retval = langwell_otg_check_se0_srp(0);
- if (retval) {
- langwell->hsm.b_bus_req = 0;
- otg_dbg("LS is not SE0, try again later\n");
- } else {
- /* Start SRP */
- langwell_otg_start_srp(&langwell->otg);
- langwell_otg_add_timer(b_srp_res_tmr);
- }
- }
- break;
- case OTG_STATE_B_SRP_INIT:
- if (!langwell->hsm.id) {
- langwell->otg.default_a = 1;
- langwell->hsm.a_srp_det = 0;
-
- langwell_otg_drv_vbus(0);
- langwell_otg_chrg_vbus(0);
-
- langwell->otg.state = OTG_STATE_A_IDLE;
- queue_work(langwell->qwork, &langwell->work);
- } else if (langwell->hsm.b_sess_vld) {
- langwell_otg_chrg_vbus(0);
- if (langwell->client_ops) {
- langwell->client_ops->resume(langwell->pdev);
- langwell->otg.state = OTG_STATE_B_PERIPHERAL;
- } else
- otg_dbg("client driver not loaded.\n");
- }
- break;
- case OTG_STATE_B_PERIPHERAL:
- if (!langwell->hsm.id) {
- langwell->otg.default_a = 1;
- langwell->hsm.a_srp_det = 0;
-
- langwell_otg_drv_vbus(0);
- langwell_otg_chrg_vbus(0);
- set_host_mode();
-
- if (langwell->client_ops) {
- langwell->client_ops->suspend(langwell->pdev,
- PMSG_FREEZE);
- } else
- otg_dbg("client driver has been removed.\n");
-
- langwell->otg.state = OTG_STATE_A_IDLE;
- queue_work(langwell->qwork, &langwell->work);
- } else if (!langwell->hsm.b_sess_vld) {
- langwell->hsm.b_hnp_enable = 0;
-
- if (langwell->client_ops) {
- langwell->client_ops->suspend(langwell->pdev,
- PMSG_FREEZE);
- } else
- otg_dbg("client driver has been removed.\n");
-
- langwell->otg.state = OTG_STATE_B_IDLE;
- } else if (langwell->hsm.b_bus_req && langwell->hsm.b_hnp_enable
- && langwell->hsm.a_bus_suspend) {
-
- if (langwell->client_ops) {
- langwell->client_ops->suspend(langwell->pdev,
- PMSG_FREEZE);
- } else
- otg_dbg("client driver has been removed.\n");
-
- langwell_otg_HAAR(1);
- langwell->hsm.a_conn = 0;
-
- if (langwell->host_ops) {
- langwell->host_ops->probe(langwell->pdev,
- langwell->host_ops->id_table);
- langwell->otg.state = OTG_STATE_B_WAIT_ACON;
- } else
- otg_dbg("host driver not loaded.\n");
-
- langwell->hsm.a_bus_resume = 0;
- langwell->hsm.b_ase0_brst_tmout = 0;
- langwell_otg_add_timer(b_ase0_brst_tmr);
- }
- break;
-
- case OTG_STATE_B_WAIT_ACON:
- if (!langwell->hsm.id) {
- langwell_otg_del_timer(b_ase0_brst_tmr);
- langwell->otg.default_a = 1;
- langwell->hsm.a_srp_det = 0;
-
- langwell_otg_drv_vbus(0);
- langwell_otg_chrg_vbus(0);
- set_host_mode();
-
- langwell_otg_HAAR(0);
- if (langwell->host_ops)
- langwell->host_ops->remove(langwell->pdev);
- else
- otg_dbg("host driver has been removed.\n");
- langwell->otg.state = OTG_STATE_A_IDLE;
- queue_work(langwell->qwork, &langwell->work);
- } else if (!langwell->hsm.b_sess_vld) {
- langwell_otg_del_timer(b_ase0_brst_tmr);
- langwell->hsm.b_hnp_enable = 0;
- langwell->hsm.b_bus_req = 0;
- langwell_otg_chrg_vbus(0);
- langwell_otg_HAAR(0);
-
- if (langwell->host_ops)
- langwell->host_ops->remove(langwell->pdev);
- else
- otg_dbg("host driver has been removed.\n");
- langwell->otg.state = OTG_STATE_B_IDLE;
- } else if (langwell->hsm.a_conn) {
- langwell_otg_del_timer(b_ase0_brst_tmr);
- langwell_otg_HAAR(0);
- langwell->otg.state = OTG_STATE_B_HOST;
- queue_work(langwell->qwork, &langwell->work);
- } else if (langwell->hsm.a_bus_resume ||
- langwell->hsm.b_ase0_brst_tmout) {
- langwell_otg_del_timer(b_ase0_brst_tmr);
- langwell_otg_HAAR(0);
- langwell_otg_nsf_msg(7);
-
- if (langwell->host_ops)
- langwell->host_ops->remove(langwell->pdev);
- else
- otg_dbg("host driver has been removed.\n");
-
- langwell->hsm.a_bus_suspend = 0;
- langwell->hsm.b_bus_req = 0;
-
- if (langwell->client_ops)
- langwell->client_ops->resume(langwell->pdev);
- else
- otg_dbg("client driver not loaded.\n");
-
- langwell->otg.state = OTG_STATE_B_PERIPHERAL;
- }
- break;
-
- case OTG_STATE_B_HOST:
- if (!langwell->hsm.id) {
- langwell->otg.default_a = 1;
- langwell->hsm.a_srp_det = 0;
-
- langwell_otg_drv_vbus(0);
- langwell_otg_chrg_vbus(0);
- set_host_mode();
- if (langwell->host_ops)
- langwell->host_ops->remove(langwell->pdev);
- else
- otg_dbg("host driver has been removed.\n");
- langwell->otg.state = OTG_STATE_A_IDLE;
- queue_work(langwell->qwork, &langwell->work);
- } else if (!langwell->hsm.b_sess_vld) {
- langwell->hsm.b_hnp_enable = 0;
- langwell->hsm.b_bus_req = 0;
- langwell_otg_chrg_vbus(0);
- if (langwell->host_ops)
- langwell->host_ops->remove(langwell->pdev);
- else
- otg_dbg("host driver has been removed.\n");
- langwell->otg.state = OTG_STATE_B_IDLE;
- } else if ((!langwell->hsm.b_bus_req) ||
- (!langwell->hsm.a_conn)) {
- langwell->hsm.b_bus_req = 0;
- langwell_otg_loc_sof(0);
- if (langwell->host_ops)
- langwell->host_ops->remove(langwell->pdev);
- else
- otg_dbg("host driver has been removed.\n");
-
- langwell->hsm.a_bus_suspend = 0;
-
- if (langwell->client_ops)
- langwell->client_ops->resume(langwell->pdev);
- else
- otg_dbg("client driver not loaded.\n");
-
- langwell->otg.state = OTG_STATE_B_PERIPHERAL;
- }
- break;
-
- case OTG_STATE_A_IDLE:
- langwell->otg.default_a = 1;
- if (langwell->hsm.id) {
- langwell->otg.default_a = 0;
- langwell->hsm.b_bus_req = 0;
- langwell_otg_drv_vbus(0);
- langwell_otg_chrg_vbus(0);
-
- langwell->otg.state = OTG_STATE_B_IDLE;
- queue_work(langwell->qwork, &langwell->work);
- } else if (langwell->hsm.a_sess_vld) {
- langwell_otg_drv_vbus(1);
- langwell->hsm.a_srp_det = 1;
- langwell->hsm.a_wait_vrise_tmout = 0;
- langwell_otg_add_timer(a_wait_vrise_tmr);
- langwell->otg.state = OTG_STATE_A_WAIT_VRISE;
- queue_work(langwell->qwork, &langwell->work);
- } else if (!langwell->hsm.a_bus_drop &&
- (langwell->hsm.a_srp_det || langwell->hsm.a_bus_req)) {
- langwell_otg_drv_vbus(1);
- langwell->hsm.a_wait_vrise_tmout = 0;
- langwell_otg_add_timer(a_wait_vrise_tmr);
- langwell->otg.state = OTG_STATE_A_WAIT_VRISE;
- queue_work(langwell->qwork, &langwell->work);
- }
- break;
- case OTG_STATE_A_WAIT_VRISE:
- if (langwell->hsm.id) {
- langwell_otg_del_timer(a_wait_vrise_tmr);
- langwell->hsm.b_bus_req = 0;
- langwell->otg.default_a = 0;
- langwell_otg_drv_vbus(0);
- langwell->otg.state = OTG_STATE_B_IDLE;
- } else if (langwell->hsm.a_vbus_vld) {
- langwell_otg_del_timer(a_wait_vrise_tmr);
- if (langwell->host_ops)
- langwell->host_ops->probe(langwell->pdev,
- langwell->host_ops->id_table);
- else
- otg_dbg("host driver not loaded.\n");
- langwell->hsm.b_conn = 0;
- langwell->hsm.a_set_b_hnp_en = 0;
- langwell->hsm.a_wait_bcon_tmout = 0;
- langwell_otg_add_timer(a_wait_bcon_tmr);
- langwell->otg.state = OTG_STATE_A_WAIT_BCON;
- } else if (langwell->hsm.a_wait_vrise_tmout) {
- if (langwell->hsm.a_vbus_vld) {
- if (langwell->host_ops)
- langwell->host_ops->probe(
- langwell->pdev,
- langwell->host_ops->id_table);
- else
- otg_dbg("host driver not loaded.\n");
- langwell->hsm.b_conn = 0;
- langwell->hsm.a_set_b_hnp_en = 0;
- langwell->hsm.a_wait_bcon_tmout = 0;
- langwell_otg_add_timer(a_wait_bcon_tmr);
- langwell->otg.state = OTG_STATE_A_WAIT_BCON;
- } else {
- langwell_otg_drv_vbus(0);
- langwell->otg.state = OTG_STATE_A_VBUS_ERR;
- }
- }
- break;
- case OTG_STATE_A_WAIT_BCON:
- if (langwell->hsm.id) {
- langwell_otg_del_timer(a_wait_bcon_tmr);
-
- langwell->otg.default_a = 0;
- langwell->hsm.b_bus_req = 0;
- if (langwell->host_ops)
- langwell->host_ops->remove(langwell->pdev);
- else
- otg_dbg("host driver has been removed.\n");
- langwell_otg_drv_vbus(0);
- langwell->otg.state = OTG_STATE_B_IDLE;
- queue_work(langwell->qwork, &langwell->work);
- } else if (!langwell->hsm.a_vbus_vld) {
- langwell_otg_del_timer(a_wait_bcon_tmr);
-
- if (langwell->host_ops)
- langwell->host_ops->remove(langwell->pdev);
- else
- otg_dbg("host driver has been removed.\n");
- langwell_otg_drv_vbus(0);
- langwell->otg.state = OTG_STATE_A_VBUS_ERR;
- } else if (langwell->hsm.a_bus_drop ||
- (langwell->hsm.a_wait_bcon_tmout &&
- !langwell->hsm.a_bus_req)) {
- langwell_otg_del_timer(a_wait_bcon_tmr);
-
- if (langwell->host_ops)
- langwell->host_ops->remove(langwell->pdev);
- else
- otg_dbg("host driver has been removed.\n");
- langwell_otg_drv_vbus(0);
- langwell->otg.state = OTG_STATE_A_WAIT_VFALL;
- } else if (langwell->hsm.b_conn) {
- langwell_otg_del_timer(a_wait_bcon_tmr);
-
- langwell->hsm.a_suspend_req = 0;
- langwell->otg.state = OTG_STATE_A_HOST;
- if (!langwell->hsm.a_bus_req &&
- langwell->hsm.a_set_b_hnp_en) {
- /* It is not safe enough to do a fast
- * transistion from A_WAIT_BCON to
- * A_SUSPEND */
- msleep(10000);
- if (langwell->hsm.a_bus_req)
- break;
-
- if (request_irq(langwell->pdev->irq,
- otg_dummy_irq, IRQF_SHARED,
- driver_name, langwell->regs) != 0) {
- otg_dbg("request interrupt %d fail\n",
- langwell->pdev->irq);
- }
-
- langwell_otg_HABA(1);
- langwell->hsm.b_bus_resume = 0;
- langwell->hsm.a_aidl_bdis_tmout = 0;
- langwell_otg_add_timer(a_aidl_bdis_tmr);
-
- langwell_otg_loc_sof(0);
- langwell->otg.state = OTG_STATE_A_SUSPEND;
- } else if (!langwell->hsm.a_bus_req &&
- !langwell->hsm.a_set_b_hnp_en) {
- struct pci_dev *pdev = langwell->pdev;
- if (langwell->host_ops)
- langwell->host_ops->remove(pdev);
- else
- otg_dbg("host driver removed.\n");
- langwell_otg_drv_vbus(0);
- langwell->otg.state = OTG_STATE_A_WAIT_VFALL;
- }
- }
- break;
- case OTG_STATE_A_HOST:
- if (langwell->hsm.id) {
- langwell->otg.default_a = 0;
- langwell->hsm.b_bus_req = 0;
- if (langwell->host_ops)
- langwell->host_ops->remove(langwell->pdev);
- else
- otg_dbg("host driver has been removed.\n");
- langwell_otg_drv_vbus(0);
- langwell->otg.state = OTG_STATE_B_IDLE;
- queue_work(langwell->qwork, &langwell->work);
- } else if (langwell->hsm.a_bus_drop ||
- (!langwell->hsm.a_set_b_hnp_en && !langwell->hsm.a_bus_req)) {
- if (langwell->host_ops)
- langwell->host_ops->remove(langwell->pdev);
- else
- otg_dbg("host driver has been removed.\n");
- langwell_otg_drv_vbus(0);
- langwell->otg.state = OTG_STATE_A_WAIT_VFALL;
- } else if (!langwell->hsm.a_vbus_vld) {
- if (langwell->host_ops)
- langwell->host_ops->remove(langwell->pdev);
- else
- otg_dbg("host driver has been removed.\n");
- langwell_otg_drv_vbus(0);
- langwell->otg.state = OTG_STATE_A_VBUS_ERR;
- } else if (langwell->hsm.a_set_b_hnp_en
- && !langwell->hsm.a_bus_req) {
- /* Set HABA to enable hardware assistance to signal
- * A-connect after receiver B-disconnect. Hardware
- * will then set client mode and enable URE, SLE and
- * PCE after the assistance. otg_dummy_irq is used to
- * clean these ints when client driver is not resumed.
- */
- if (request_irq(langwell->pdev->irq,
- otg_dummy_irq, IRQF_SHARED, driver_name,
- langwell->regs) != 0) {
- otg_dbg("request interrupt %d failed\n",
- langwell->pdev->irq);
- }
-
- /* set HABA */
- langwell_otg_HABA(1);
- langwell->hsm.b_bus_resume = 0;
- langwell->hsm.a_aidl_bdis_tmout = 0;
- langwell_otg_add_timer(a_aidl_bdis_tmr);
- langwell_otg_loc_sof(0);
- langwell->otg.state = OTG_STATE_A_SUSPEND;
- } else if (!langwell->hsm.b_conn || !langwell->hsm.a_bus_req) {
- langwell->hsm.a_wait_bcon_tmout = 0;
- langwell->hsm.a_set_b_hnp_en = 0;
- langwell_otg_add_timer(a_wait_bcon_tmr);
- langwell->otg.state = OTG_STATE_A_WAIT_BCON;
- }
- break;
- case OTG_STATE_A_SUSPEND:
- if (langwell->hsm.id) {
- langwell_otg_del_timer(a_aidl_bdis_tmr);
- langwell_otg_HABA(0);
- free_irq(langwell->pdev->irq, langwell->regs);
- langwell->otg.default_a = 0;
- langwell->hsm.b_bus_req = 0;
- if (langwell->host_ops)
- langwell->host_ops->remove(langwell->pdev);
- else
- otg_dbg("host driver has been removed.\n");
- langwell_otg_drv_vbus(0);
- langwell->otg.state = OTG_STATE_B_IDLE;
- queue_work(langwell->qwork, &langwell->work);
- } else if (langwell->hsm.a_bus_req ||
- langwell->hsm.b_bus_resume) {
- langwell_otg_del_timer(a_aidl_bdis_tmr);
- langwell_otg_HABA(0);
- free_irq(langwell->pdev->irq, langwell->regs);
- langwell->hsm.a_suspend_req = 0;
- langwell_otg_loc_sof(1);
- langwell->otg.state = OTG_STATE_A_HOST;
- } else if (langwell->hsm.a_aidl_bdis_tmout ||
- langwell->hsm.a_bus_drop) {
- langwell_otg_del_timer(a_aidl_bdis_tmr);
- langwell_otg_HABA(0);
- free_irq(langwell->pdev->irq, langwell->regs);
- if (langwell->host_ops)
- langwell->host_ops->remove(langwell->pdev);
- else
- otg_dbg("host driver has been removed.\n");
- langwell_otg_drv_vbus(0);
- langwell->otg.state = OTG_STATE_A_WAIT_VFALL;
- } else if (!langwell->hsm.b_conn &&
- langwell->hsm.a_set_b_hnp_en) {
- langwell_otg_del_timer(a_aidl_bdis_tmr);
- langwell_otg_HABA(0);
- free_irq(langwell->pdev->irq, langwell->regs);
-
- if (langwell->host_ops)
- langwell->host_ops->remove(langwell->pdev);
- else
- otg_dbg("host driver has been removed.\n");
-
- langwell->hsm.b_bus_suspend = 0;
- langwell->hsm.b_bus_suspend_vld = 0;
- langwell->hsm.b_bus_suspend_tmout = 0;
-
- /* msleep(200); */
- if (langwell->client_ops)
- langwell->client_ops->resume(langwell->pdev);
- else
- otg_dbg("client driver not loaded.\n");
-
- langwell_otg_add_timer(b_bus_suspend_tmr);
- langwell->otg.state = OTG_STATE_A_PERIPHERAL;
- break;
- } else if (!langwell->hsm.a_vbus_vld) {
- langwell_otg_del_timer(a_aidl_bdis_tmr);
- langwell_otg_HABA(0);
- free_irq(langwell->pdev->irq, langwell->regs);
- if (langwell->host_ops)
- langwell->host_ops->remove(langwell->pdev);
- else
- otg_dbg("host driver has been removed.\n");
- langwell_otg_drv_vbus(0);
- langwell->otg.state = OTG_STATE_A_VBUS_ERR;
- }
- break;
- case OTG_STATE_A_PERIPHERAL:
- if (langwell->hsm.id) {
- langwell_otg_del_timer(b_bus_suspend_tmr);
- langwell->otg.default_a = 0;
- langwell->hsm.b_bus_req = 0;
- if (langwell->client_ops)
- langwell->client_ops->suspend(langwell->pdev,
- PMSG_FREEZE);
- else
- otg_dbg("client driver has been removed.\n");
- langwell_otg_drv_vbus(0);
- langwell->otg.state = OTG_STATE_B_IDLE;
- queue_work(langwell->qwork, &langwell->work);
- } else if (!langwell->hsm.a_vbus_vld) {
- langwell_otg_del_timer(b_bus_suspend_tmr);
- if (langwell->client_ops)
- langwell->client_ops->suspend(langwell->pdev,
- PMSG_FREEZE);
- else
- otg_dbg("client driver has been removed.\n");
- langwell_otg_drv_vbus(0);
- langwell->otg.state = OTG_STATE_A_VBUS_ERR;
- } else if (langwell->hsm.a_bus_drop) {
- langwell_otg_del_timer(b_bus_suspend_tmr);
- if (langwell->client_ops)
- langwell->client_ops->suspend(langwell->pdev,
- PMSG_FREEZE);
- else
- otg_dbg("client driver has been removed.\n");
- langwell_otg_drv_vbus(0);
- langwell->otg.state = OTG_STATE_A_WAIT_VFALL;
- } else if (langwell->hsm.b_bus_suspend) {
- langwell_otg_del_timer(b_bus_suspend_tmr);
- if (langwell->client_ops)
- langwell->client_ops->suspend(langwell->pdev,
- PMSG_FREEZE);
- else
- otg_dbg("client driver has been removed.\n");
-
- if (langwell->host_ops)
- langwell->host_ops->probe(langwell->pdev,
- langwell->host_ops->id_table);
- else
- otg_dbg("host driver not loaded.\n");
- langwell->hsm.a_set_b_hnp_en = 0;
- langwell->hsm.a_wait_bcon_tmout = 0;
- langwell_otg_add_timer(a_wait_bcon_tmr);
- langwell->otg.state = OTG_STATE_A_WAIT_BCON;
- } else if (langwell->hsm.b_bus_suspend_tmout) {
- u32 val;
- val = readl(langwell->regs + CI_PORTSC1);
- if (!(val & PORTSC_SUSP))
- break;
- if (langwell->client_ops)
- langwell->client_ops->suspend(langwell->pdev,
- PMSG_FREEZE);
- else
- otg_dbg("client driver has been removed.\n");
- if (langwell->host_ops)
- langwell->host_ops->probe(langwell->pdev,
- langwell->host_ops->id_table);
- else
- otg_dbg("host driver not loaded.\n");
- langwell->hsm.a_set_b_hnp_en = 0;
- langwell->hsm.a_wait_bcon_tmout = 0;
- langwell_otg_add_timer(a_wait_bcon_tmr);
- langwell->otg.state = OTG_STATE_A_WAIT_BCON;
- }
- break;
- case OTG_STATE_A_VBUS_ERR:
- if (langwell->hsm.id) {
- langwell->otg.default_a = 0;
- langwell->hsm.a_clr_err = 0;
- langwell->hsm.a_srp_det = 0;
- langwell->otg.state = OTG_STATE_B_IDLE;
- queue_work(langwell->qwork, &langwell->work);
- } else if (langwell->hsm.a_clr_err) {
- langwell->hsm.a_clr_err = 0;
- langwell->hsm.a_srp_det = 0;
- reset_otg();
- init_hsm();
- if (langwell->otg.state == OTG_STATE_A_IDLE)
- queue_work(langwell->qwork, &langwell->work);
- }
- break;
- case OTG_STATE_A_WAIT_VFALL:
- if (langwell->hsm.id) {
- langwell->otg.default_a = 0;
- langwell->otg.state = OTG_STATE_B_IDLE;
- queue_work(langwell->qwork, &langwell->work);
- } else if (langwell->hsm.a_bus_req) {
- langwell_otg_drv_vbus(1);
- langwell->hsm.a_wait_vrise_tmout = 0;
- langwell_otg_add_timer(a_wait_vrise_tmr);
- langwell->otg.state = OTG_STATE_A_WAIT_VRISE;
- } else if (!langwell->hsm.a_sess_vld) {
- langwell->hsm.a_srp_det = 0;
- langwell_otg_drv_vbus(0);
- set_host_mode();
- langwell->otg.state = OTG_STATE_A_IDLE;
- }
- break;
- default:
- ;
- }
-
- otg_dbg("%s: new state = %s\n", __func__,
- state_string(langwell->otg.state));
-}
-
- static ssize_t
-show_registers(struct device *_dev, struct device_attribute *attr, char *buf)
-{
- struct langwell_otg *langwell;
- char *next;
- unsigned size;
- unsigned t;
-
- langwell = the_transceiver;
- next = buf;
- size = PAGE_SIZE;
-
- t = scnprintf(next, size,
- "\n"
- "USBCMD = 0x%08x \n"
- "USBSTS = 0x%08x \n"
- "USBINTR = 0x%08x \n"
- "ASYNCLISTADDR = 0x%08x \n"
- "PORTSC1 = 0x%08x \n"
- "HOSTPC1 = 0x%08x \n"
- "OTGSC = 0x%08x \n"
- "USBMODE = 0x%08x \n",
- readl(langwell->regs + 0x30),
- readl(langwell->regs + 0x34),
- readl(langwell->regs + 0x38),
- readl(langwell->regs + 0x48),
- readl(langwell->regs + 0x74),
- readl(langwell->regs + 0xb4),
- readl(langwell->regs + 0xf4),
- readl(langwell->regs + 0xf8)
- );
- size -= t;
- next += t;
-
- return PAGE_SIZE - size;
-}
-static DEVICE_ATTR(registers, S_IRUGO, show_registers, NULL);
-
-static ssize_t
-show_hsm(struct device *_dev, struct device_attribute *attr, char *buf)
-{
- struct langwell_otg *langwell;
- char *next;
- unsigned size;
- unsigned t;
-
- langwell = the_transceiver;
- next = buf;
- size = PAGE_SIZE;
-
- t = scnprintf(next, size,
- "\n"
- "current state = %s\n"
- "a_bus_resume = \t%d\n"
- "a_bus_suspend = \t%d\n"
- "a_conn = \t%d\n"
- "a_sess_vld = \t%d\n"
- "a_srp_det = \t%d\n"
- "a_vbus_vld = \t%d\n"
- "b_bus_resume = \t%d\n"
- "b_bus_suspend = \t%d\n"
- "b_conn = \t%d\n"
- "b_se0_srp = \t%d\n"
- "b_sess_end = \t%d\n"
- "b_sess_vld = \t%d\n"
- "id = \t%d\n"
- "a_set_b_hnp_en = \t%d\n"
- "b_srp_done = \t%d\n"
- "b_hnp_enable = \t%d\n"
- "a_wait_vrise_tmout = \t%d\n"
- "a_wait_bcon_tmout = \t%d\n"
- "a_aidl_bdis_tmout = \t%d\n"
- "b_ase0_brst_tmout = \t%d\n"
- "a_bus_drop = \t%d\n"
- "a_bus_req = \t%d\n"
- "a_clr_err = \t%d\n"
- "a_suspend_req = \t%d\n"
- "b_bus_req = \t%d\n"
- "b_bus_suspend_tmout = \t%d\n"
- "b_bus_suspend_vld = \t%d\n",
- state_string(langwell->otg.state),
- langwell->hsm.a_bus_resume,
- langwell->hsm.a_bus_suspend,
- langwell->hsm.a_conn,
- langwell->hsm.a_sess_vld,
- langwell->hsm.a_srp_det,
- langwell->hsm.a_vbus_vld,
- langwell->hsm.b_bus_resume,
- langwell->hsm.b_bus_suspend,
- langwell->hsm.b_conn,
- langwell->hsm.b_se0_srp,
- langwell->hsm.b_sess_end,
- langwell->hsm.b_sess_vld,
- langwell->hsm.id,
- langwell->hsm.a_set_b_hnp_en,
- langwell->hsm.b_srp_done,
- langwell->hsm.b_hnp_enable,
- langwell->hsm.a_wait_vrise_tmout,
- langwell->hsm.a_wait_bcon_tmout,
- langwell->hsm.a_aidl_bdis_tmout,
- langwell->hsm.b_ase0_brst_tmout,
- langwell->hsm.a_bus_drop,
- langwell->hsm.a_bus_req,
- langwell->hsm.a_clr_err,
- langwell->hsm.a_suspend_req,
- langwell->hsm.b_bus_req,
- langwell->hsm.b_bus_suspend_tmout,
- langwell->hsm.b_bus_suspend_vld
- );
- size -= t;
- next += t;
-
- return PAGE_SIZE - size;
-}
-static DEVICE_ATTR(hsm, S_IRUGO, show_hsm, NULL);
-
-static ssize_t
-get_a_bus_req(struct device *dev, struct device_attribute *attr, char *buf)
-{
- struct langwell_otg *langwell;
- char *next;
- unsigned size;
- unsigned t;
-
- langwell = the_transceiver;
- next = buf;
- size = PAGE_SIZE;
-
- t = scnprintf(next, size, "%d", langwell->hsm.a_bus_req);
- size -= t;
- next += t;
-
- return PAGE_SIZE - size;
-}
-
-static ssize_t
-set_a_bus_req(struct device *dev, struct device_attribute *attr,
- const char *buf, size_t count)
-{
- struct langwell_otg *langwell;
- langwell = the_transceiver;
- if (!langwell->otg.default_a)
- return -1;
- if (count > 2)
- return -1;
-
- if (buf[0] == '0') {
- langwell->hsm.a_bus_req = 0;
- otg_dbg("a_bus_req = 0\n");
- } else if (buf[0] == '1') {
- /* If a_bus_drop is TRUE, a_bus_req can't be set */
- if (langwell->hsm.a_bus_drop)
- return -1;
- langwell->hsm.a_bus_req = 1;
- otg_dbg("a_bus_req = 1\n");
- }
- if (spin_trylock(&langwell->wq_lock)) {
- queue_work(langwell->qwork, &langwell->work);
- spin_unlock(&langwell->wq_lock);
- }
- return count;
-}
-static DEVICE_ATTR(a_bus_req, S_IRUGO | S_IWUGO, get_a_bus_req, set_a_bus_req);
-
-static ssize_t
-get_a_bus_drop(struct device *dev, struct device_attribute *attr, char *buf)
-{
- struct langwell_otg *langwell;
- char *next;
- unsigned size;
- unsigned t;
-
- langwell = the_transceiver;
- next = buf;
- size = PAGE_SIZE;
-
- t = scnprintf(next, size, "%d", langwell->hsm.a_bus_drop);
- size -= t;
- next += t;
-
- return PAGE_SIZE - size;
-}
-
-static ssize_t
-set_a_bus_drop(struct device *dev, struct device_attribute *attr,
- const char *buf, size_t count)
-{
- struct langwell_otg *langwell;
- langwell = the_transceiver;
- if (!langwell->otg.default_a)
- return -1;
- if (count > 2)
- return -1;
-
- if (buf[0] == '0') {
- langwell->hsm.a_bus_drop = 0;
- otg_dbg("a_bus_drop = 0\n");
- } else if (buf[0] == '1') {
- langwell->hsm.a_bus_drop = 1;
- langwell->hsm.a_bus_req = 0;
- otg_dbg("a_bus_drop = 1, then a_bus_req = 0\n");
- }
- if (spin_trylock(&langwell->wq_lock)) {
- queue_work(langwell->qwork, &langwell->work);
- spin_unlock(&langwell->wq_lock);
- }
- return count;
-}
-static DEVICE_ATTR(a_bus_drop, S_IRUGO | S_IWUGO,
- get_a_bus_drop, set_a_bus_drop);
-
-static ssize_t
-get_b_bus_req(struct device *dev, struct device_attribute *attr, char *buf)
-{
- struct langwell_otg *langwell;
- char *next;
- unsigned size;
- unsigned t;
-
- langwell = the_transceiver;
- next = buf;
- size = PAGE_SIZE;
-
- t = scnprintf(next, size, "%d", langwell->hsm.b_bus_req);
- size -= t;
- next += t;
-
- return PAGE_SIZE - size;
-}
-
-static ssize_t
-set_b_bus_req(struct device *dev, struct device_attribute *attr,
- const char *buf, size_t count)
-{
- struct langwell_otg *langwell;
- langwell = the_transceiver;
-
- if (langwell->otg.default_a)
- return -1;
-
- if (count > 2)
- return -1;
-
- if (buf[0] == '0') {
- langwell->hsm.b_bus_req = 0;
- otg_dbg("b_bus_req = 0\n");
- } else if (buf[0] == '1') {
- langwell->hsm.b_bus_req = 1;
- otg_dbg("b_bus_req = 1\n");
- }
- if (spin_trylock(&langwell->wq_lock)) {
- queue_work(langwell->qwork, &langwell->work);
- spin_unlock(&langwell->wq_lock);
- }
- return count;
-}
-static DEVICE_ATTR(b_bus_req, S_IRUGO | S_IWUGO, get_b_bus_req, set_b_bus_req);
-
-static ssize_t
-set_a_clr_err(struct device *dev, struct device_attribute *attr,
- const char *buf, size_t count)
-{
- struct langwell_otg *langwell;
- langwell = the_transceiver;
-
- if (!langwell->otg.default_a)
- return -1;
- if (count > 2)
- return -1;
-
- if (buf[0] == '1') {
- langwell->hsm.a_clr_err = 1;
- otg_dbg("a_clr_err = 1\n");
- }
- if (spin_trylock(&langwell->wq_lock)) {
- queue_work(langwell->qwork, &langwell->work);
- spin_unlock(&langwell->wq_lock);
- }
- return count;
-}
-static DEVICE_ATTR(a_clr_err, S_IWUGO, NULL, set_a_clr_err);
-
-static struct attribute *inputs_attrs[] = {
- &dev_attr_a_bus_req.attr,
- &dev_attr_a_bus_drop.attr,
- &dev_attr_b_bus_req.attr,
- &dev_attr_a_clr_err.attr,
- NULL,
-};
-
-static struct attribute_group debug_dev_attr_group = {
- .name = "inputs",
- .attrs = inputs_attrs,
-};
-
-int langwell_register_host(struct pci_driver *host_driver)
-{
- int ret = 0;
-
- the_transceiver->host_ops = host_driver;
- queue_work(the_transceiver->qwork, &the_transceiver->work);
- otg_dbg("host controller driver is registered\n");
-
- return ret;
-}
-EXPORT_SYMBOL(langwell_register_host);
-
-void langwell_unregister_host(struct pci_driver *host_driver)
-{
- if (the_transceiver->host_ops)
- the_transceiver->host_ops->remove(the_transceiver->pdev);
- the_transceiver->host_ops = NULL;
- the_transceiver->hsm.a_bus_drop = 1;
- queue_work(the_transceiver->qwork, &the_transceiver->work);
- otg_dbg("host controller driver is unregistered\n");
-}
-EXPORT_SYMBOL(langwell_unregister_host);
-
-int langwell_register_peripheral(struct pci_driver *client_driver)
-{
- int ret = 0;
-
- if (client_driver)
- ret = client_driver->probe(the_transceiver->pdev,
- client_driver->id_table);
- if (!ret) {
- the_transceiver->client_ops = client_driver;
- queue_work(the_transceiver->qwork, &the_transceiver->work);
- otg_dbg("client controller driver is registered\n");
- }
-
- return ret;
-}
-EXPORT_SYMBOL(langwell_register_peripheral);
-
-void langwell_unregister_peripheral(struct pci_driver *client_driver)
-{
- if (the_transceiver->client_ops)
- the_transceiver->client_ops->remove(the_transceiver->pdev);
- the_transceiver->client_ops = NULL;
- the_transceiver->hsm.b_bus_req = 0;
- queue_work(the_transceiver->qwork, &the_transceiver->work);
- otg_dbg("client controller driver is unregistered\n");
-}
-EXPORT_SYMBOL(langwell_unregister_peripheral);
-
-static int langwell_otg_probe(struct pci_dev *pdev,
- const struct pci_device_id *id)
-{
- unsigned long resource, len;
- void __iomem *base = NULL;
- int retval;
- u32 val32;
- struct langwell_otg *langwell;
- char qname[] = "langwell_otg_queue";
-
- retval = 0;
- otg_dbg("\notg controller is detected.\n");
- if (pci_enable_device(pdev) < 0) {
- retval = -ENODEV;
- goto done;
- }
-
- langwell = kzalloc(sizeof *langwell, GFP_KERNEL);
- if (langwell == NULL) {
- retval = -ENOMEM;
- goto done;
- }
- the_transceiver = langwell;
-
- /* control register: BAR 0 */
- resource = pci_resource_start(pdev, 0);
- len = pci_resource_len(pdev, 0);
- if (!request_mem_region(resource, len, driver_name)) {
- retval = -EBUSY;
- goto err;
- }
- langwell->region = 1;
-
- base = ioremap_nocache(resource, len);
- if (base == NULL) {
- retval = -EFAULT;
- goto err;
- }
- langwell->regs = base;
-
- if (!pdev->irq) {
- otg_dbg("No IRQ.\n");
- retval = -ENODEV;
- goto err;
- }
-
- langwell->qwork = create_workqueue(qname);
- if (!langwell->qwork) {
- otg_dbg("cannot create workqueue %s\n", qname);
- retval = -ENOMEM;
- goto err;
- }
- INIT_WORK(&langwell->work, langwell_otg_work);
-
- /* OTG common part */
- langwell->pdev = pdev;
- langwell->otg.dev = &pdev->dev;
- langwell->otg.label = driver_name;
- langwell->otg.set_host = langwell_otg_set_host;
- langwell->otg.set_peripheral = langwell_otg_set_peripheral;
- langwell->otg.set_power = langwell_otg_set_power;
- langwell->otg.start_srp = langwell_otg_start_srp;
- langwell->otg.state = OTG_STATE_UNDEFINED;
- if (otg_set_transceiver(&langwell->otg)) {
- otg_dbg("can't set transceiver\n");
- retval = -EBUSY;
- goto err;
- }
-
- reset_otg();
- init_hsm();
-
- spin_lock_init(&langwell->lock);
- spin_lock_init(&langwell->wq_lock);
- INIT_LIST_HEAD(&active_timers);
- langwell_otg_init_timers(&langwell->hsm);
-
- if (request_irq(pdev->irq, otg_irq, IRQF_SHARED,
- driver_name, langwell) != 0) {
- otg_dbg("request interrupt %d failed\n", pdev->irq);
- retval = -EBUSY;
- goto err;
- }
-
- /* enable OTGSC int */
- val32 = OTGSC_DPIE | OTGSC_BSEIE | OTGSC_BSVIE |
- OTGSC_ASVIE | OTGSC_AVVIE | OTGSC_IDIE | OTGSC_IDPU;
- writel(val32, langwell->regs + CI_OTGSC);
-
- retval = device_create_file(&pdev->dev, &dev_attr_registers);
- if (retval < 0) {
- otg_dbg("Can't register sysfs attribute: %d\n", retval);
- goto err;
- }
-
- retval = device_create_file(&pdev->dev, &dev_attr_hsm);
- if (retval < 0) {
- otg_dbg("Can't hsm sysfs attribute: %d\n", retval);
- goto err;
- }
-
- retval = sysfs_create_group(&pdev->dev.kobj, &debug_dev_attr_group);
- if (retval < 0) {
- otg_dbg("Can't register sysfs attr group: %d\n", retval);
- goto err;
- }
-
- if (langwell->otg.state == OTG_STATE_A_IDLE)
- queue_work(langwell->qwork, &langwell->work);
-
- return 0;
-
-err:
- if (the_transceiver)
- langwell_otg_remove(pdev);
-done:
- return retval;
-}
-
-static void langwell_otg_remove(struct pci_dev *pdev)
-{
- struct langwell_otg *langwell;
-
- langwell = the_transceiver;
-
- if (langwell->qwork) {
- flush_workqueue(langwell->qwork);
- destroy_workqueue(langwell->qwork);
- }
- langwell_otg_free_timers();
-
- /* disable OTGSC interrupt as OTGSC doesn't change in reset */
- writel(0, langwell->regs + CI_OTGSC);
-
- if (pdev->irq)
- free_irq(pdev->irq, langwell);
- if (langwell->regs)
- iounmap(langwell->regs);
- if (langwell->region)
- release_mem_region(pci_resource_start(pdev, 0),
- pci_resource_len(pdev, 0));
-
- otg_set_transceiver(NULL);
- pci_disable_device(pdev);
- sysfs_remove_group(&pdev->dev.kobj, &debug_dev_attr_group);
- device_remove_file(&pdev->dev, &dev_attr_hsm);
- device_remove_file(&pdev->dev, &dev_attr_registers);
- kfree(langwell);
- langwell = NULL;
-}
-
-static void transceiver_suspend(struct pci_dev *pdev)
-{
- pci_save_state(pdev);
- pci_set_power_state(pdev, PCI_D3hot);
- langwell_otg_phy_low_power(1);
-}
-
-static int langwell_otg_suspend(struct pci_dev *pdev, pm_message_t message)
-{
- int ret = 0;
- struct langwell_otg *langwell;
-
- langwell = the_transceiver;
-
- /* Disbale OTG interrupts */
- langwell_otg_intr(0);
-
- if (pdev->irq)
- free_irq(pdev->irq, langwell);
-
- /* Prevent more otg_work */
- flush_workqueue(langwell->qwork);
- spin_lock(&langwell->wq_lock);
-
- /* start actions */
- switch (langwell->otg.state) {
- case OTG_STATE_A_IDLE:
- case OTG_STATE_B_IDLE:
- case OTG_STATE_A_WAIT_VFALL:
- case OTG_STATE_A_VBUS_ERR:
- transceiver_suspend(pdev);
- break;
- case OTG_STATE_A_WAIT_VRISE:
- langwell_otg_del_timer(a_wait_vrise_tmr);
- langwell->hsm.a_srp_det = 0;
- langwell_otg_drv_vbus(0);
- langwell->otg.state = OTG_STATE_A_IDLE;
- transceiver_suspend(pdev);
- break;
- case OTG_STATE_A_WAIT_BCON:
- langwell_otg_del_timer(a_wait_bcon_tmr);
- if (langwell->host_ops)
- ret = langwell->host_ops->suspend(pdev, message);
- langwell_otg_drv_vbus(0);
- break;
- case OTG_STATE_A_HOST:
- if (langwell->host_ops)
- ret = langwell->host_ops->suspend(pdev, message);
- langwell_otg_drv_vbus(0);
- langwell_otg_phy_low_power(1);
- break;
- case OTG_STATE_A_SUSPEND:
- langwell_otg_del_timer(a_aidl_bdis_tmr);
- langwell_otg_HABA(0);
- if (langwell->host_ops)
- langwell->host_ops->remove(pdev);
- else
- otg_dbg("host driver has been removed.\n");
- langwell_otg_drv_vbus(0);
- transceiver_suspend(pdev);
- langwell->otg.state = OTG_STATE_A_WAIT_VFALL;
- break;
- case OTG_STATE_A_PERIPHERAL:
- if (langwell->client_ops)
- ret = langwell->client_ops->suspend(pdev, message);
- else
- otg_dbg("client driver has been removed.\n");
- langwell_otg_drv_vbus(0);
- transceiver_suspend(pdev);
- langwell->otg.state = OTG_STATE_A_WAIT_VFALL;
- break;
- case OTG_STATE_B_HOST:
- if (langwell->host_ops)
- langwell->host_ops->remove(pdev);
- else
- otg_dbg("host driver has been removed.\n");
- langwell->hsm.b_bus_req = 0;
- transceiver_suspend(pdev);
- langwell->otg.state = OTG_STATE_B_IDLE;
- break;
- case OTG_STATE_B_PERIPHERAL:
- if (langwell->client_ops)
- ret = langwell->client_ops->suspend(pdev, message);
- else
- otg_dbg("client driver has been removed.\n");
- break;
- case OTG_STATE_B_WAIT_ACON:
- langwell_otg_del_timer(b_ase0_brst_tmr);
- langwell_otg_HAAR(0);
- if (langwell->host_ops)
- langwell->host_ops->remove(pdev);
- else
- otg_dbg("host driver has been removed.\n");
- langwell->hsm.b_bus_req = 0;
- langwell->otg.state = OTG_STATE_B_IDLE;
- transceiver_suspend(pdev);
- break;
- default:
- otg_dbg("error state before suspend\n ");
- break;
- }
- spin_unlock(&langwell->wq_lock);
-
- return ret;
-}
-
-static void transceiver_resume(struct pci_dev *pdev)
-{
- pci_restore_state(pdev);
- pci_set_power_state(pdev, PCI_D0);
- langwell_otg_phy_low_power(0);
-}
-
-static int langwell_otg_resume(struct pci_dev *pdev)
-{
- int ret = 0;
- struct langwell_otg *langwell;
-
- langwell = the_transceiver;
-
- spin_lock(&langwell->wq_lock);
-
- switch (langwell->otg.state) {
- case OTG_STATE_A_IDLE:
- case OTG_STATE_B_IDLE:
- case OTG_STATE_A_WAIT_VFALL:
- case OTG_STATE_A_VBUS_ERR:
- transceiver_resume(pdev);
- break;
- case OTG_STATE_A_WAIT_BCON:
- langwell_otg_add_timer(a_wait_bcon_tmr);
- langwell_otg_drv_vbus(1);
- if (langwell->host_ops)
- ret = langwell->host_ops->resume(pdev);
- break;
- case OTG_STATE_A_HOST:
- langwell_otg_drv_vbus(1);
- langwell_otg_phy_low_power(0);
- if (langwell->host_ops)
- ret = langwell->host_ops->resume(pdev);
- break;
- case OTG_STATE_B_PERIPHERAL:
- if (langwell->client_ops)
- ret = langwell->client_ops->resume(pdev);
- else
- otg_dbg("client driver not loaded.\n");
- break;
- default:
- otg_dbg("error state before suspend\n ");
- break;
- }
-
- if (request_irq(pdev->irq, otg_irq, IRQF_SHARED,
- driver_name, the_transceiver) != 0) {
- otg_dbg("request interrupt %d failed\n", pdev->irq);
- ret = -EBUSY;
- }
-
- /* enable OTG interrupts */
- langwell_otg_intr(1);
-
- spin_unlock(&langwell->wq_lock);
-
- queue_work(langwell->qwork, &langwell->work);
-
-
- return ret;
-}
-
-static int __init langwell_otg_init(void)
-{
- return pci_register_driver(&otg_pci_driver);
-}
-module_init(langwell_otg_init);
-
-static void __exit langwell_otg_cleanup(void)
-{
- pci_unregister_driver(&otg_pci_driver);
-}
-module_exit(langwell_otg_cleanup);
diff --git a/drivers/usb/otg/nop-usb-xceiv.c b/drivers/usb/otg/nop-usb-xceiv.c
index 9ed5ea5..af456b4 100644
--- a/drivers/usb/otg/nop-usb-xceiv.c
+++ b/drivers/usb/otg/nop-usb-xceiv.c
@@ -53,6 +53,7 @@
void usb_nop_xceiv_unregister(void)
{
platform_device_unregister(pd);
+ pd = NULL;
}
EXPORT_SYMBOL(usb_nop_xceiv_unregister);
diff --git a/drivers/usb/serial/console.c b/drivers/usb/serial/console.c
index 247b61b..0e4f2e4 100644
--- a/drivers/usb/serial/console.c
+++ b/drivers/usb/serial/console.c
@@ -169,9 +169,11 @@
kfree(tty);
}
}
- /* So we know not to kill the hardware on a hangup on this
- port. We have also bumped the use count by one so it won't go
- idle */
+ /* Now that any required fake tty operations are completed restore
+ * the tty port count */
+ --port->port.count;
+ /* The console is special in terms of closing the device so
+ * indicate this port is now acting as a system console. */
port->console = 1;
retval = 0;
@@ -204,7 +206,7 @@
dbg("%s - port %d, %d byte(s)", __func__, port->number, count);
- if (!port->port.count) {
+ if (!port->console) {
dbg("%s - port not opened", __func__);
return;
}
@@ -300,8 +302,7 @@
{
if (usbcons_info.port) {
unregister_console(&usbcons);
- if (usbcons_info.port->port.count)
- usbcons_info.port->port.count--;
+ usbcons_info.port->console = 0;
usbcons_info.port = NULL;
}
}
diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c
index 2b9eeda..e9a40b8 100644
--- a/drivers/usb/serial/cp210x.c
+++ b/drivers/usb/serial/cp210x.c
@@ -67,6 +67,8 @@
{ USB_DEVICE(0x10AB, 0x10C5) }, /* Siemens MC60 Cable */
{ USB_DEVICE(0x10B5, 0xAC70) }, /* Nokia CA-42 USB */
{ USB_DEVICE(0x10C4, 0x0F91) }, /* Vstabi */
+ { USB_DEVICE(0x10C4, 0x1101) }, /* Arkham Technology DS101 Bus Monitor */
+ { USB_DEVICE(0x10C4, 0x1601) }, /* Arkham Technology DS101 Adapter */
{ USB_DEVICE(0x10C4, 0x800A) }, /* SPORTident BSM7-D-USB main station */
{ USB_DEVICE(0x10C4, 0x803B) }, /* Pololu USB-serial converter */
{ USB_DEVICE(0x10C4, 0x8053) }, /* Enfora EDG1228 */
diff --git a/drivers/usb/serial/cypress_m8.c b/drivers/usb/serial/cypress_m8.c
index 9734085..59adfe1 100644
--- a/drivers/usb/serial/cypress_m8.c
+++ b/drivers/usb/serial/cypress_m8.c
@@ -1228,8 +1228,8 @@
/* precursor to disconnect so just go away */
return;
case -EPIPE:
- usb_clear_halt(port->serial->dev, 0x81);
- break;
+ /* Can't call usb_clear_halt while in_interrupt */
+ /* FALLS THROUGH */
default:
/* something ugly is going on... */
dev_err(&urb->dev->dev,
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index 3dc3768..60c64cc 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -33,6 +33,7 @@
#include <linux/errno.h>
#include <linux/init.h>
#include <linux/slab.h>
+#include <linux/smp_lock.h>
#include <linux/tty.h>
#include <linux/tty_driver.h>
#include <linux/tty_flip.h>
@@ -107,6 +108,7 @@
static int ftdi_jtag_probe(struct usb_serial *serial);
static int ftdi_mtxorb_hack_setup(struct usb_serial *serial);
+static int ftdi_NDI_device_setup(struct usb_serial *serial);
static void ftdi_USB_UIRT_setup(struct ftdi_private *priv);
static void ftdi_HE_TIRA1_setup(struct ftdi_private *priv);
@@ -118,6 +120,10 @@
.probe = ftdi_mtxorb_hack_setup,
};
+static struct ftdi_sio_quirk ftdi_NDI_device_quirk = {
+ .probe = ftdi_NDI_device_setup,
+};
+
static struct ftdi_sio_quirk ftdi_USB_UIRT_quirk = {
.port_probe = ftdi_USB_UIRT_setup,
};
@@ -191,6 +197,7 @@
{ USB_DEVICE(FTDI_VID, FTDI_MTXORB_4_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_MTXORB_5_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_MTXORB_6_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_R2000KU_TRUE_RNG) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0100_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0101_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0102_PID) },
@@ -579,6 +586,9 @@
{ USB_DEVICE(FTDI_VID, FTDI_CCSICDU20_0_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_CCSICDU40_1_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_CCSMACHX_2_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_CCSLOAD_N_GO_3_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_CCSICDU64_4_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_CCSPRIME8_5_PID) },
{ USB_DEVICE(FTDI_VID, INSIDE_ACCESSO) },
{ USB_DEVICE(INTREPID_VID, INTREPID_VALUECAN_PID) },
{ USB_DEVICE(INTREPID_VID, INTREPID_NEOVI_PID) },
@@ -644,6 +654,16 @@
{ USB_DEVICE(FTDI_VID, FTDI_TACTRIX_OPENPORT_13S_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_TACTRIX_OPENPORT_13U_PID) },
{ USB_DEVICE(ELEKTOR_VID, ELEKTOR_FT323R_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_NDI_HUC_PID),
+ .driver_info = (kernel_ulong_t)&ftdi_NDI_device_quirk },
+ { USB_DEVICE(FTDI_VID, FTDI_NDI_SPECTRA_SCU_PID),
+ .driver_info = (kernel_ulong_t)&ftdi_NDI_device_quirk },
+ { USB_DEVICE(FTDI_VID, FTDI_NDI_FUTURE_2_PID),
+ .driver_info = (kernel_ulong_t)&ftdi_NDI_device_quirk },
+ { USB_DEVICE(FTDI_VID, FTDI_NDI_FUTURE_3_PID),
+ .driver_info = (kernel_ulong_t)&ftdi_NDI_device_quirk },
+ { USB_DEVICE(FTDI_VID, FTDI_NDI_AURORA_SCU_PID),
+ .driver_info = (kernel_ulong_t)&ftdi_NDI_device_quirk },
{ USB_DEVICE(TELLDUS_VID, TELLDUS_TELLSTICK_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_MAXSTREAM_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_PHI_FISCO_PID) },
@@ -660,6 +680,8 @@
.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
{ USB_DEVICE(FTDI_VID, LMI_LM3S_EVAL_BOARD_PID),
.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
+ { USB_DEVICE(FTDI_VID, FTDI_TURTELIZER_PID),
+ .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
{ USB_DEVICE(RATOC_VENDOR_ID, RATOC_PRODUCT_ID_USB60F) },
{ USB_DEVICE(FTDI_VID, FTDI_REU_TINY_PID) },
{ USB_DEVICE(PAPOUCH_VID, PAPOUCH_QUIDO4x4_PID) },
@@ -667,7 +689,6 @@
{ USB_DEVICE(FTDI_VID, FTDI_DOMINTELL_DUSB_PID) },
{ USB_DEVICE(ALTI2_VID, ALTI2_N3_PID) },
{ USB_DEVICE(FTDI_VID, DIEBOLD_BCS_SE923_PID) },
- { USB_DEVICE(FTDI_VID, FTDI_NDI_HUC_PID) },
{ USB_DEVICE(ATMEL_VID, STK541_PID) },
{ USB_DEVICE(DE_VID, STB_PID) },
{ USB_DEVICE(DE_VID, WHT_PID) },
@@ -1023,6 +1044,16 @@
case FT2232C: /* FT2232C chip */
case FT232RL:
if (baud <= 3000000) {
+ __u16 product_id = le16_to_cpu(
+ port->serial->dev->descriptor.idProduct);
+ if (((FTDI_NDI_HUC_PID == product_id) ||
+ (FTDI_NDI_SPECTRA_SCU_PID == product_id) ||
+ (FTDI_NDI_FUTURE_2_PID == product_id) ||
+ (FTDI_NDI_FUTURE_3_PID == product_id) ||
+ (FTDI_NDI_AURORA_SCU_PID == product_id)) &&
+ (baud == 19200)) {
+ baud = 1200000;
+ }
div_value = ftdi_232bm_baud_to_divisor(baud);
} else {
dbg("%s - Baud rate too high!", __func__);
@@ -1554,6 +1585,39 @@
} /* ftdi_HE_TIRA1_setup */
/*
+ * Module parameter to control latency timer for NDI FTDI-based USB devices.
+ * If this value is not set in modprobe.conf.local its value will be set to 1ms.
+ */
+static int ndi_latency_timer = 1;
+
+/* Setup for the NDI FTDI-based USB devices, which requires hardwired
+ * baudrate (19200 gets mapped to 1200000).
+ *
+ * Called from usbserial:serial_probe.
+ */
+static int ftdi_NDI_device_setup(struct usb_serial *serial)
+{
+ struct usb_device *udev = serial->dev;
+ int latency = ndi_latency_timer;
+ int rv = 0;
+ char buf[1];
+
+ if (latency == 0)
+ latency = 1;
+ if (latency > 99)
+ latency = 99;
+
+ dbg("%s setting NDI device latency to %d", __func__, latency);
+ dev_info(&udev->dev, "NDI device with a latency value of %d", latency);
+
+ rv = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
+ FTDI_SIO_SET_LATENCY_TIMER_REQUEST,
+ FTDI_SIO_SET_LATENCY_TIMER_REQUEST_TYPE,
+ latency, 0, buf, 0, WDR_TIMEOUT);
+ return 0;
+}
+
+/*
* First port on JTAG adaptors such as Olimex arm-usb-ocd or the FIC/OpenMoko
* Neo1973 Debug Board is reserved for JTAG interface and can be accessed from
* userspace using openocd.
@@ -2121,7 +2185,7 @@
/* Note that the error flag is duplicated for
every character received since we don't know
which character it applied to */
- if (!usb_serial_handle_sysrq_char(port,
+ if (!usb_serial_handle_sysrq_char(tty, port,
data[packet_offset + i]))
tty_insert_flip_char(tty,
data[packet_offset + i],
@@ -2622,3 +2686,5 @@
module_param(product, ushort, 0);
MODULE_PARM_DESC(product, "User specified product ID");
+module_param(ndi_latency_timer, int, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(ndi_latency_timer, "NDI device latency timer override");
diff --git a/drivers/usb/serial/ftdi_sio.h b/drivers/usb/serial/ftdi_sio.h
index f1d440a..c9fbd74 100644
--- a/drivers/usb/serial/ftdi_sio.h
+++ b/drivers/usb/serial/ftdi_sio.h
@@ -506,6 +506,7 @@
*
* Armin Laeuger originally sent the PID for the UM 100 module.
*/
+#define FTDI_R2000KU_TRUE_RNG 0xFB80 /* R2000KU TRUE RNG */
#define FTDI_ELV_UR100_PID 0xFB58 /* USB-RS232-Umsetzer (UR 100) */
#define FTDI_ELV_UM100_PID 0xFB5A /* USB-Modul UM 100 */
#define FTDI_ELV_UO100_PID 0xFB5B /* USB-Modul UO 100 */
@@ -614,6 +615,9 @@
#define FTDI_CCSICDU20_0_PID 0xF9D0
#define FTDI_CCSICDU40_1_PID 0xF9D1
#define FTDI_CCSMACHX_2_PID 0xF9D2
+#define FTDI_CCSLOAD_N_GO_3_PID 0xF9D3
+#define FTDI_CCSICDU64_4_PID 0xF9D4
+#define FTDI_CCSPRIME8_5_PID 0xF9D5
/* Inside Accesso contactless reader (http://www.insidefr.com) */
#define INSIDE_ACCESSO 0xFAD0
@@ -736,6 +740,15 @@
#define FTDI_PYRAMID_PID 0xE6C8 /* Pyramid Appliance Display */
/*
+ * NDI (www.ndigital.com) product ids
+ */
+#define FTDI_NDI_HUC_PID 0xDA70 /* NDI Host USB Converter */
+#define FTDI_NDI_SPECTRA_SCU_PID 0xDA71 /* NDI Spectra SCU */
+#define FTDI_NDI_FUTURE_2_PID 0xDA72 /* NDI future device #2 */
+#define FTDI_NDI_FUTURE_3_PID 0xDA73 /* NDI future device #3 */
+#define FTDI_NDI_AURORA_SCU_PID 0xDA74 /* NDI Aurora SCU */
+
+/*
* Posiflex inc retail equipment (http://www.posiflex.com.tw)
*/
#define POSIFLEX_VID 0x0d3a /* Vendor ID */
@@ -848,9 +861,6 @@
#define TML_VID 0x1B91 /* Vendor ID */
#define TML_USB_SERIAL_PID 0x0064 /* USB - Serial Converter */
-/* NDI Polaris System */
-#define FTDI_NDI_HUC_PID 0xDA70
-
/* Propox devices */
#define FTDI_PROPOX_JTAGCABLEII_PID 0xD738
@@ -934,6 +944,8 @@
#define MARVELL_VID 0x9e88
#define MARVELL_SHEEVAPLUG_PID 0x9e8f
+#define FTDI_TURTELIZER_PID 0xBDC8 /* JTAG/RS-232 adapter by egnite GmBH */
+
/*
* BmRequestType: 1100 0000b
* bRequest: FTDI_E2_READ
diff --git a/drivers/usb/serial/generic.c b/drivers/usb/serial/generic.c
index 932d624..ce57f6a 100644
--- a/drivers/usb/serial/generic.c
+++ b/drivers/usb/serial/generic.c
@@ -424,10 +424,17 @@
if (!tty)
goto done;
- /* Push data to tty */
- for (i = 0; i < urb->actual_length; i++, ch++) {
- if (!usb_serial_handle_sysrq_char(port, *ch))
- tty_insert_flip_char(tty, *ch, TTY_NORMAL);
+ /* The per character mucking around with sysrq path it too slow for
+ stuff like 3G modems, so shortcircuit it in the 99.9999999% of cases
+ where the USB serial is not a console anyway */
+ if (!port->console || !port->sysrq)
+ tty_insert_flip_string(tty, ch, urb->actual_length);
+ else {
+ /* Push data to tty */
+ for (i = 0; i < urb->actual_length; i++, ch++) {
+ if (!usb_serial_handle_sysrq_char(tty, port, *ch))
+ tty_insert_flip_char(tty, *ch, TTY_NORMAL);
+ }
}
tty_flip_buffer_push(tty);
tty_kref_put(tty);
@@ -527,11 +534,12 @@
}
}
-int usb_serial_handle_sysrq_char(struct usb_serial_port *port, unsigned int ch)
+int usb_serial_handle_sysrq_char(struct tty_struct *tty,
+ struct usb_serial_port *port, unsigned int ch)
{
if (port->sysrq && port->console) {
if (ch && time_before(jiffies, port->sysrq)) {
- handle_sysrq(ch, tty_port_tty_get(&port->port));
+ handle_sysrq(ch, tty);
port->sysrq = 0;
return 1;
}
diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c
index c40f95c..c31940a 100644
--- a/drivers/usb/serial/mos7840.c
+++ b/drivers/usb/serial/mos7840.c
@@ -26,6 +26,7 @@
#include <linux/errno.h>
#include <linux/init.h>
#include <linux/slab.h>
+#include <linux/smp_lock.h>
#include <linux/tty.h>
#include <linux/tty_driver.h>
#include <linux/tty_flip.h>
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index 575816e..98262dd 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -206,6 +206,7 @@
#define NOVATELWIRELESS_PRODUCT_MC950D 0x4400
#define NOVATELWIRELESS_PRODUCT_U727 0x5010
#define NOVATELWIRELESS_PRODUCT_MC760 0x6000
+#define NOVATELWIRELESS_PRODUCT_OVMC760 0x6002
/* FUTURE NOVATEL PRODUCTS */
#define NOVATELWIRELESS_PRODUCT_EVDO_HIGHSPEED 0X6001
@@ -307,11 +308,20 @@
#define DLINK_VENDOR_ID 0x1186
#define DLINK_PRODUCT_DWM_652 0x3e04
+#define QISDA_VENDOR_ID 0x1da5
+#define QISDA_PRODUCT_H21_4512 0x4512
+#define QISDA_PRODUCT_H21_4523 0x4523
+#define QISDA_PRODUCT_H20_4515 0x4515
+#define QISDA_PRODUCT_H20_4519 0x4519
+
/* TOSHIBA PRODUCTS */
#define TOSHIBA_VENDOR_ID 0x0930
#define TOSHIBA_PRODUCT_HSDPA_MINICARD 0x1302
+#define ALINK_VENDOR_ID 0x1e0e
+#define ALINK_PRODUCT_3GU 0x9200
+
static struct usb_device_id option_ids[] = {
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_COLT) },
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_RICOLA) },
@@ -430,6 +440,7 @@
{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_MC727) }, /* Novatel MC727/U727/USB727 */
{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_U727) }, /* Novatel MC727/U727/USB727 */
{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_MC760) }, /* Novatel MC760/U760/USB760 */
+ { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_OVMC760) }, /* Novatel Ovation MC760 */
{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_HSPA_FULLSPEED) }, /* Novatel HSPA product */
{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_EVDO_EMBEDDED_FULLSPEED) }, /* Novatel EVDO Embedded product */
{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_HSPA_EMBEDDED_FULLSPEED) }, /* Novatel HSPA Embedded product */
@@ -529,8 +540,13 @@
{ USB_DEVICE(ZTE_VENDOR_ID, ZTE_PRODUCT_CDMA_TECH) },
{ USB_DEVICE(BENQ_VENDOR_ID, BENQ_PRODUCT_H10) },
{ USB_DEVICE(DLINK_VENDOR_ID, DLINK_PRODUCT_DWM_652) },
- { USB_DEVICE(0x1da5, 0x4515) }, /* BenQ H20 */
+ { USB_DEVICE(QISDA_VENDOR_ID, QISDA_PRODUCT_H21_4512) },
+ { USB_DEVICE(QISDA_VENDOR_ID, QISDA_PRODUCT_H21_4523) },
+ { USB_DEVICE(QISDA_VENDOR_ID, QISDA_PRODUCT_H20_4515) },
+ { USB_DEVICE(QISDA_VENDOR_ID, QISDA_PRODUCT_H20_4519) },
{ USB_DEVICE(TOSHIBA_VENDOR_ID, TOSHIBA_PRODUCT_HSDPA_MINICARD ) }, /* Toshiba 3G HSDPA == Novatel Expedite EU870D MiniCard */
+ { USB_DEVICE(ALINK_VENDOR_ID, 0x9000) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ALINK_VENDOR_ID, ALINK_PRODUCT_3GU, 0xff, 0xff, 0xff) },
{ } /* Terminating entry */
};
MODULE_DEVICE_TABLE(usb, option_ids);
@@ -732,7 +748,6 @@
memcpy(this_urb->transfer_buffer, buf, todo);
this_urb->transfer_buffer_length = todo;
- this_urb->dev = port->serial->dev;
err = usb_submit_urb(this_urb, GFP_ATOMIC);
if (err) {
dbg("usb_submit_urb %p (write bulk) failed "
@@ -860,7 +875,6 @@
/* Resubmit urb so we continue receiving IRQ data */
if (status != -ESHUTDOWN && status != -ENOENT) {
- urb->dev = serial->dev;
err = usb_submit_urb(urb, GFP_ATOMIC);
if (err)
dbg("%s: resubmit intr urb failed. (%d)",
@@ -921,23 +935,11 @@
dbg("%s", __func__);
- /* Reset low level data toggle and start reading from endpoints */
+ /* Start reading from the IN endpoint */
for (i = 0; i < N_IN_URB; i++) {
urb = portdata->in_urbs[i];
if (!urb)
continue;
- if (urb->dev != serial->dev) {
- dbg("%s: dev %p != %p", __func__,
- urb->dev, serial->dev);
- continue;
- }
-
- /*
- * make sure endpoint data toggle is synchronized with the
- * device
- */
- usb_clear_halt(urb->dev, urb->pipe);
-
err = usb_submit_urb(urb, GFP_KERNEL);
if (err) {
dbg("%s: submit urb %d failed (%d) %d",
@@ -946,16 +948,6 @@
}
}
- /* Reset low level data toggle on out endpoints */
- for (i = 0; i < N_OUT_URB; i++) {
- urb = portdata->out_urbs[i];
- if (!urb)
- continue;
- urb->dev = serial->dev;
- /* usb_settoggle(urb->dev, usb_pipeendpoint(urb->pipe),
- usb_pipeout(urb->pipe), 0); */
- }
-
option_send_setup(port);
return 0;
@@ -1218,7 +1210,6 @@
dbg("%s: No interrupt URB for port %d\n", __func__, i);
continue;
}
- port->interrupt_in_urb->dev = serial->dev;
err = usb_submit_urb(port->interrupt_in_urb, GFP_NOIO);
dbg("Submitted interrupt URB for port %d (result %d)", i, err);
if (err < 0) {
diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c
index ec6c132..7d15bfa 100644
--- a/drivers/usb/serial/pl2303.c
+++ b/drivers/usb/serial/pl2303.c
@@ -94,6 +94,7 @@
{ USB_DEVICE(YCCABLE_VENDOR_ID, YCCABLE_PRODUCT_ID) },
{ USB_DEVICE(SUPERIAL_VENDOR_ID, SUPERIAL_PRODUCT_ID) },
{ USB_DEVICE(HP_VENDOR_ID, HP_LD220_PRODUCT_ID) },
+ { USB_DEVICE(CRESSI_VENDOR_ID, CRESSI_EDY_PRODUCT_ID) },
{ } /* Terminating entry */
};
@@ -971,18 +972,46 @@
__func__, retval);
}
+static void pl2303_push_data(struct tty_struct *tty,
+ struct usb_serial_port *port, struct urb *urb,
+ u8 line_status)
+{
+ unsigned char *data = urb->transfer_buffer;
+ /* get tty_flag from status */
+ char tty_flag = TTY_NORMAL;
+ /* break takes precedence over parity, */
+ /* which takes precedence over framing errors */
+ if (line_status & UART_BREAK_ERROR)
+ tty_flag = TTY_BREAK;
+ else if (line_status & UART_PARITY_ERROR)
+ tty_flag = TTY_PARITY;
+ else if (line_status & UART_FRAME_ERROR)
+ tty_flag = TTY_FRAME;
+ dbg("%s - tty_flag = %d", __func__, tty_flag);
+
+ tty_buffer_request_room(tty, urb->actual_length + 1);
+ /* overrun is special, not associated with a char */
+ if (line_status & UART_OVERRUN_ERROR)
+ tty_insert_flip_char(tty, 0, TTY_OVERRUN);
+ if (port->console && port->sysrq) {
+ int i;
+ for (i = 0; i < urb->actual_length; ++i)
+ if (!usb_serial_handle_sysrq_char(tty, port, data[i]))
+ tty_insert_flip_char(tty, data[i], tty_flag);
+ } else
+ tty_insert_flip_string(tty, data, urb->actual_length);
+ tty_flip_buffer_push(tty);
+}
+
static void pl2303_read_bulk_callback(struct urb *urb)
{
struct usb_serial_port *port = urb->context;
struct pl2303_private *priv = usb_get_serial_port_data(port);
struct tty_struct *tty;
- unsigned char *data = urb->transfer_buffer;
unsigned long flags;
- int i;
int result;
int status = urb->status;
u8 line_status;
- char tty_flag;
dbg("%s - port %d", __func__, port->number);
@@ -1010,10 +1039,7 @@
}
usb_serial_debug_data(debug, &port->dev, __func__,
- urb->actual_length, data);
-
- /* get tty_flag from status */
- tty_flag = TTY_NORMAL;
+ urb->actual_length, urb->transfer_buffer);
spin_lock_irqsave(&priv->lock, flags);
line_status = priv->line_status;
@@ -1021,26 +1047,9 @@
spin_unlock_irqrestore(&priv->lock, flags);
wake_up_interruptible(&priv->delta_msr_wait);
- /* break takes precedence over parity, */
- /* which takes precedence over framing errors */
- if (line_status & UART_BREAK_ERROR)
- tty_flag = TTY_BREAK;
- else if (line_status & UART_PARITY_ERROR)
- tty_flag = TTY_PARITY;
- else if (line_status & UART_FRAME_ERROR)
- tty_flag = TTY_FRAME;
- dbg("%s - tty_flag = %d", __func__, tty_flag);
-
tty = tty_port_tty_get(&port->port);
if (tty && urb->actual_length) {
- tty_buffer_request_room(tty, urb->actual_length + 1);
- /* overrun is special, not associated with a char */
- if (line_status & UART_OVERRUN_ERROR)
- tty_insert_flip_char(tty, 0, TTY_OVERRUN);
- for (i = 0; i < urb->actual_length; ++i)
- if (!usb_serial_handle_sysrq_char(port, data[i]))
- tty_insert_flip_char(tty, data[i], tty_flag);
- tty_flip_buffer_push(tty);
+ pl2303_push_data(tty, port, urb, line_status);
}
tty_kref_put(tty);
/* Schedule the next read _if_ we are still open */
diff --git a/drivers/usb/serial/pl2303.h b/drivers/usb/serial/pl2303.h
index 1d7a22e..12aac7d 100644
--- a/drivers/usb/serial/pl2303.h
+++ b/drivers/usb/serial/pl2303.h
@@ -122,3 +122,7 @@
/* Hewlett-Packard LD220-HP POS Pole Display */
#define HP_VENDOR_ID 0x03f0
#define HP_LD220_PRODUCT_ID 0x3524
+
+/* Cressi Edy (diving computer) PC interface */
+#define CRESSI_VENDOR_ID 0x04b8
+#define CRESSI_EDY_PRODUCT_ID 0x0521
diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c
index 032f7ae..f48d05e 100644
--- a/drivers/usb/serial/sierra.c
+++ b/drivers/usb/serial/sierra.c
@@ -181,35 +181,50 @@
};
static struct usb_device_id id_table [] = {
+ { USB_DEVICE(0x0F3D, 0x0112) }, /* Airprime/Sierra PC 5220 */
+ { USB_DEVICE(0x03F0, 0x1B1D) }, /* HP ev2200 a.k.a MC5720 */
+ { USB_DEVICE(0x03F0, 0x1E1D) }, /* HP hs2300 a.k.a MC8775 */
+
{ USB_DEVICE(0x1199, 0x0017) }, /* Sierra Wireless EM5625 */
{ USB_DEVICE(0x1199, 0x0018) }, /* Sierra Wireless MC5720 */
{ USB_DEVICE(0x1199, 0x0218) }, /* Sierra Wireless MC5720 */
- { USB_DEVICE(0x03f0, 0x1b1d) }, /* HP ev2200 a.k.a MC5720 */
{ USB_DEVICE(0x1199, 0x0020) }, /* Sierra Wireless MC5725 */
- { USB_DEVICE(0x1199, 0x0024) }, /* Sierra Wireless MC5727 */
{ USB_DEVICE(0x1199, 0x0220) }, /* Sierra Wireless MC5725 */
+ { USB_DEVICE(0x1199, 0x0022) }, /* Sierra Wireless EM5725 */
+ { USB_DEVICE(0x1199, 0x0024) }, /* Sierra Wireless MC5727 */
+ { USB_DEVICE(0x1199, 0x0224) }, /* Sierra Wireless MC5727 */
{ USB_DEVICE(0x1199, 0x0019) }, /* Sierra Wireless AirCard 595 */
{ USB_DEVICE(0x1199, 0x0021) }, /* Sierra Wireless AirCard 597E */
+ { USB_DEVICE(0x1199, 0x0112) }, /* Sierra Wireless AirCard 580 */
{ USB_DEVICE(0x1199, 0x0120) }, /* Sierra Wireless USB Dongle 595U */
- /* Sierra Wireless C597 */
+ /* Sierra Wireless C597 */
{ USB_DEVICE_AND_INTERFACE_INFO(0x1199, 0x0023, 0xFF, 0xFF, 0xFF) },
- /* Sierra Wireless Device */
+ /* Sierra Wireless T598 */
{ USB_DEVICE_AND_INTERFACE_INFO(0x1199, 0x0025, 0xFF, 0xFF, 0xFF) },
- { USB_DEVICE(0x1199, 0x0026) }, /* Sierra Wireless Device */
- { USB_DEVICE(0x1199, 0x0027) }, /* Sierra Wireless Device */
- { USB_DEVICE(0x1199, 0x0028) }, /* Sierra Wireless Device */
+ { USB_DEVICE(0x1199, 0x0026) }, /* Sierra Wireless T11 */
+ { USB_DEVICE(0x1199, 0x0027) }, /* Sierra Wireless AC402 */
+ { USB_DEVICE(0x1199, 0x0028) }, /* Sierra Wireless MC5728 */
+ { USB_DEVICE(0x1199, 0x0029) }, /* Sierra Wireless Device */
{ USB_DEVICE(0x1199, 0x6802) }, /* Sierra Wireless MC8755 */
- { USB_DEVICE(0x1199, 0x6804) }, /* Sierra Wireless MC8755 */
{ USB_DEVICE(0x1199, 0x6803) }, /* Sierra Wireless MC8765 */
+ { USB_DEVICE(0x1199, 0x6804) }, /* Sierra Wireless MC8755 */
+ { USB_DEVICE(0x1199, 0x6805) }, /* Sierra Wireless MC8765 */
+ { USB_DEVICE(0x1199, 0x6808) }, /* Sierra Wireless MC8755 */
+ { USB_DEVICE(0x1199, 0x6809) }, /* Sierra Wireless MC8765 */
{ USB_DEVICE(0x1199, 0x6812) }, /* Sierra Wireless MC8775 & AC 875U */
- { USB_DEVICE(0x1199, 0x6813) }, /* Sierra Wireless MC8775 (Lenovo) */
+ { USB_DEVICE(0x1199, 0x6813) }, /* Sierra Wireless MC8775 */
{ USB_DEVICE(0x1199, 0x6815) }, /* Sierra Wireless MC8775 */
- { USB_DEVICE(0x03f0, 0x1e1d) }, /* HP hs2300 a.k.a MC8775 */
+ { USB_DEVICE(0x1199, 0x6816) }, /* Sierra Wireless MC8775 */
{ USB_DEVICE(0x1199, 0x6820) }, /* Sierra Wireless AirCard 875 */
{ USB_DEVICE(0x1199, 0x6821) }, /* Sierra Wireless AirCard 875U */
+ { USB_DEVICE(0x1199, 0x6822) }, /* Sierra Wireless AirCard 875E */
{ USB_DEVICE(0x1199, 0x6832) }, /* Sierra Wireless MC8780 */
{ USB_DEVICE(0x1199, 0x6833) }, /* Sierra Wireless MC8781 */
+ { USB_DEVICE(0x1199, 0x6834) }, /* Sierra Wireless MC8780 */
+ { USB_DEVICE(0x1199, 0x6835) }, /* Sierra Wireless MC8781 */
+ { USB_DEVICE(0x1199, 0x6838) }, /* Sierra Wireless MC8780 */
+ { USB_DEVICE(0x1199, 0x6839) }, /* Sierra Wireless MC8781 */
{ USB_DEVICE(0x1199, 0x683A) }, /* Sierra Wireless MC8785 */
{ USB_DEVICE(0x1199, 0x683B) }, /* Sierra Wireless MC8785 Composite */
/* Sierra Wireless MC8790, MC8791, MC8792 Composite */
@@ -227,16 +242,13 @@
{ USB_DEVICE(0x1199, 0x685A) }, /* Sierra Wireless AirCard 885 E */
/* Sierra Wireless C885 */
{ USB_DEVICE_AND_INTERFACE_INFO(0x1199, 0x6880, 0xFF, 0xFF, 0xFF)},
- /* Sierra Wireless Device */
+ /* Sierra Wireless C888, Air Card 501, USB 303, USB 304 */
{ USB_DEVICE_AND_INTERFACE_INFO(0x1199, 0x6890, 0xFF, 0xFF, 0xFF)},
- /* Sierra Wireless Device */
+ /* Sierra Wireless C22/C33 */
{ USB_DEVICE_AND_INTERFACE_INFO(0x1199, 0x6891, 0xFF, 0xFF, 0xFF)},
- /* Sierra Wireless Device */
+ /* Sierra Wireless HSPA Non-Composite Device */
{ USB_DEVICE_AND_INTERFACE_INFO(0x1199, 0x6892, 0xFF, 0xFF, 0xFF)},
-
- { USB_DEVICE(0x1199, 0x0112) }, /* Sierra Wireless AirCard 580 */
- { USB_DEVICE(0x0F3D, 0x0112) }, /* Airprime/Sierra PC 5220 */
-
+ { USB_DEVICE(0x1199, 0x6893) }, /* Sierra Wireless Device */
{ USB_DEVICE(0x1199, 0x68A3), /* Sierra Wireless Direct IP modems */
.driver_info = (kernel_ulong_t)&direct_ip_interface_blacklist
},
@@ -814,7 +826,7 @@
return 0;
}
-static void sierra_disconnect(struct usb_serial *serial)
+static void sierra_release(struct usb_serial *serial)
{
int i;
struct usb_serial_port *port;
@@ -830,7 +842,6 @@
if (!portdata)
continue;
kfree(portdata);
- usb_set_serial_port_data(port, NULL);
}
}
@@ -853,7 +864,7 @@
.tiocmget = sierra_tiocmget,
.tiocmset = sierra_tiocmset,
.attach = sierra_startup,
- .disconnect = sierra_disconnect,
+ .release = sierra_release,
.read_int_callback = sierra_instat_callback,
};
diff --git a/drivers/usb/serial/ti_usb_3410_5052.c b/drivers/usb/serial/ti_usb_3410_5052.c
index 991d823..14971a9 100644
--- a/drivers/usb/serial/ti_usb_3410_5052.c
+++ b/drivers/usb/serial/ti_usb_3410_5052.c
@@ -191,7 +191,6 @@
{ USB_DEVICE(TI_VENDOR_ID, TI_5152_BOOT_PRODUCT_ID) },
{ USB_DEVICE(TI_VENDOR_ID, TI_5052_EEPROM_PRODUCT_ID) },
{ USB_DEVICE(TI_VENDOR_ID, TI_5052_FIRMWARE_PRODUCT_ID) },
- { USB_DEVICE(IBM_VENDOR_ID, IBM_4543_PRODUCT_ID) },
};
static struct usb_device_id ti_id_table_combined[14+2*TI_EXTRA_VID_PID_COUNT+1] = {
@@ -1658,7 +1657,7 @@
u8 cs = 0;
int done;
struct ti_firmware_header *header;
- int status;
+ int status = 0;
int len;
for (pos = sizeof(struct ti_firmware_header); pos < size; pos++)
diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c
index d595aa5..bd7581b 100644
--- a/drivers/usb/serial/usb-serial.c
+++ b/drivers/usb/serial/usb-serial.c
@@ -21,6 +21,7 @@
#include <linux/errno.h>
#include <linux/init.h>
#include <linux/slab.h>
+#include <linux/smp_lock.h>
#include <linux/tty.h>
#include <linux/tty_driver.h>
#include <linux/tty_flip.h>
@@ -220,7 +221,8 @@
tty->driver_data = port;
tty_port_tty_set(&port->port, tty);
- if (port->port.count == 1) {
+ /* If the console is attached, the device is already open */
+ if (port->port.count == 1 && !port->console) {
/* lock this module before we call it
* this may fail, which means we must bail out,
@@ -333,6 +335,9 @@
{
struct usb_serial_port *port = tty->driver_data;
+ if (!port)
+ return;
+
dbg("%s - port %d", __func__, port->number);
diff --git a/drivers/usb/storage/option_ms.c b/drivers/usb/storage/option_ms.c
index d41cc0a..773a5cd 100644
--- a/drivers/usb/storage/option_ms.c
+++ b/drivers/usb/storage/option_ms.c
@@ -118,6 +118,9 @@
result = memcmp(buffer+8, "Option", 6);
+ if (result != 0)
+ result = memcmp(buffer+8, "ZCOPTION", 8);
+
/* Read the CSW */
usb_stor_bulk_transfer_buf(us,
us->recv_bulk_pipe,
diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index d6d65ef..8afcf08 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -616,6 +616,8 @@
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
+ select STI_CONSOLE
+ select VT
default y
---help---
STI refers to the HP "Standard Text Interface" which is a set of
diff --git a/drivers/video/amba-clcd.c b/drivers/video/amba-clcd.c
index fb8163d..a21efcd 100644
--- a/drivers/video/amba-clcd.c
+++ b/drivers/video/amba-clcd.c
@@ -226,9 +226,10 @@
clcdfb_enable(fb, regs.cntl);
#ifdef DEBUG
- printk(KERN_INFO "CLCD: Registers set to\n"
- KERN_INFO " %08x %08x %08x %08x\n"
- KERN_INFO " %08x %08x %08x %08x\n",
+ printk(KERN_INFO
+ "CLCD: Registers set to\n"
+ " %08x %08x %08x %08x\n"
+ " %08x %08x %08x %08x\n",
readl(fb->regs + CLCD_TIM0), readl(fb->regs + CLCD_TIM1),
readl(fb->regs + CLCD_TIM2), readl(fb->regs + CLCD_TIM3),
readl(fb->regs + CLCD_UBAS), readl(fb->regs + CLCD_LBAS),
diff --git a/drivers/video/atafb.c b/drivers/video/atafb.c
index 018850c..8cd279b 100644
--- a/drivers/video/atafb.c
+++ b/drivers/video/atafb.c
@@ -2405,6 +2405,9 @@
return 0;
}
+/* fbhw->encode_fix() must be called with fb_info->mm_lock held
+ * if it is called after the register_framebuffer() - not a case here
+ */
static int atafb_get_fix(struct fb_fix_screeninfo *fix, struct fb_info *info)
{
struct atafb_par par;
@@ -2414,7 +2417,8 @@
if (err)
return err;
memset(fix, 0, sizeof(struct fb_fix_screeninfo));
- return fbhw->encode_fix(fix, &par);
+ err = fbhw->encode_fix(fix, &par);
+ return err;
}
static int atafb_get_var(struct fb_var_screeninfo *var, struct fb_info *info)
@@ -2743,7 +2747,9 @@
/* Decode wanted screen parameters */
fbhw->decode_var(&info->var, par);
+ mutex_lock(&info->mm_lock);
fbhw->encode_fix(&info->fix, par);
+ mutex_unlock(&info->mm_lock);
/* Set new videomode */
ata_set_par(par);
diff --git a/drivers/video/atmel_lcdfb.c b/drivers/video/atmel_lcdfb.c
index 5afd644..da05f08 100644
--- a/drivers/video/atmel_lcdfb.c
+++ b/drivers/video/atmel_lcdfb.c
@@ -261,6 +261,9 @@
/**
* atmel_lcdfb_alloc_video_memory - Allocate framebuffer memory
* @sinfo: the frame buffer to allocate memory for
+ *
+ * This function is called only from the atmel_lcdfb_probe()
+ * so no locking by fb_info->mm_lock around smem_len setting is needed.
*/
static int atmel_lcdfb_alloc_video_memory(struct atmel_lcdfb_info *sinfo)
{
diff --git a/drivers/video/aty/atyfb.h b/drivers/video/aty/atyfb.h
index 7691e73..1f39a62 100644
--- a/drivers/video/aty/atyfb.h
+++ b/drivers/video/aty/atyfb.h
@@ -187,6 +187,8 @@
int mtrr_reg;
#endif
u32 mem_cntl;
+ struct crtc saved_crtc;
+ union aty_pll saved_pll;
};
/*
@@ -217,6 +219,7 @@
#define M64F_XL_DLL 0x00080000
#define M64F_MFB_FORCE_4 0x00100000
#define M64F_HW_TRIPLE 0x00200000
+#define M64F_XL_MEM 0x00400000
/*
* Register access
*/
diff --git a/drivers/video/aty/atyfb_base.c b/drivers/video/aty/atyfb_base.c
index 1207c20..63d3739 100644
--- a/drivers/video/aty/atyfb_base.c
+++ b/drivers/video/aty/atyfb_base.c
@@ -66,6 +66,8 @@
#include <linux/spinlock.h>
#include <linux/wait.h>
#include <linux/backlight.h>
+#include <linux/reboot.h>
+#include <linux/dmi.h>
#include <asm/io.h>
#include <linux/uaccess.h>
@@ -249,8 +251,6 @@
static int store_video_par(char *videopar, unsigned char m64_num);
#endif
-static struct crtc saved_crtc;
-static union aty_pll saved_pll;
static void aty_get_crtc(const struct atyfb_par *par, struct crtc *crtc);
static void aty_set_crtc(const struct atyfb_par *par, const struct crtc *crtc);
@@ -261,6 +261,8 @@
static int read_aty_sense(const struct atyfb_par *par);
#endif
+static DEFINE_MUTEX(reboot_lock);
+static struct fb_info *reboot_info;
/*
* Interface used by the world
@@ -361,8 +363,8 @@
#define ATI_CHIP_264GTPRO (ATI_MODERN_SET | M64F_SDRAM_MAGIC_PLL | M64F_HW_TRIPLE | M64F_FIFO_32 | M64F_RESET_3D)
#define ATI_CHIP_264LTPRO (ATI_MODERN_SET | M64F_HW_TRIPLE | M64F_FIFO_32 | M64F_RESET_3D)
-#define ATI_CHIP_264XL (ATI_MODERN_SET | M64F_HW_TRIPLE | M64F_FIFO_32 | M64F_RESET_3D | M64F_XL_DLL | M64F_MFB_FORCE_4)
-#define ATI_CHIP_MOBILITY (ATI_MODERN_SET | M64F_HW_TRIPLE | M64F_FIFO_32 | M64F_RESET_3D | M64F_XL_DLL | M64F_MFB_FORCE_4 | M64F_MOBIL_BUS)
+#define ATI_CHIP_264XL (ATI_MODERN_SET | M64F_HW_TRIPLE | M64F_FIFO_32 | M64F_RESET_3D | M64F_XL_DLL | M64F_MFB_FORCE_4 | M64F_XL_MEM)
+#define ATI_CHIP_MOBILITY (ATI_MODERN_SET | M64F_HW_TRIPLE | M64F_FIFO_32 | M64F_RESET_3D | M64F_XL_DLL | M64F_MFB_FORCE_4 | M64F_XL_MEM | M64F_MOBIL_BUS)
static struct {
u16 pci_id;
@@ -539,6 +541,7 @@
static char ram_sdram[] __devinitdata = "SDRAM (1:1)";
static char ram_sgram[] __devinitdata = "SGRAM (1:1)";
static char ram_sdram32[] __devinitdata = "SDRAM (2:1) (32-bit)";
+static char ram_wram[] __devinitdata = "WRAM";
static char ram_off[] __devinitdata = "OFF";
#endif /* CONFIG_FB_ATY_CT */
@@ -553,6 +556,10 @@
#ifdef CONFIG_FB_ATY_CT
static char *aty_ct_ram[8] __devinitdata = {
ram_off, ram_dram, ram_edo, ram_edo,
+ ram_sdram, ram_sgram, ram_wram, ram_resv
+};
+static char *aty_xl_ram[8] __devinitdata = {
+ ram_off, ram_dram, ram_edo, ram_edo,
ram_sdram, ram_sgram, ram_sdram32, ram_resv
};
#endif /* CONFIG_FB_ATY_CT */
@@ -760,6 +767,17 @@
#endif /* CONFIG_FB_ATY_GENERIC_LCD */
}
+static u32 calc_line_length(struct atyfb_par *par, u32 vxres, u32 bpp)
+{
+ u32 line_length = vxres * bpp / 8;
+
+ if (par->ram_type == SGRAM ||
+ (!M64_HAS(XL_MEM) && par->ram_type == WRAM))
+ line_length = (line_length + 63) & ~63;
+
+ return line_length;
+}
+
static int aty_var_to_crtc(const struct fb_info *info,
const struct fb_var_screeninfo *var, struct crtc *crtc)
{
@@ -769,13 +787,14 @@
u32 h_total, h_disp, h_sync_strt, h_sync_end, h_sync_dly, h_sync_wid, h_sync_pol;
u32 v_total, v_disp, v_sync_strt, v_sync_end, v_sync_wid, v_sync_pol, c_sync;
u32 pix_width, dp_pix_width, dp_chain_mask;
+ u32 line_length;
/* input */
- xres = var->xres;
+ xres = (var->xres + 7) & ~7;
yres = var->yres;
- vxres = var->xres_virtual;
+ vxres = (var->xres_virtual + 7) & ~7;
vyres = var->yres_virtual;
- xoffset = var->xoffset;
+ xoffset = (var->xoffset + 7) & ~7;
yoffset = var->yoffset;
bpp = var->bits_per_pixel;
if (bpp == 16)
@@ -827,7 +846,9 @@
} else
FAIL("invalid bpp");
- if (vxres * vyres * bpp / 8 > info->fix.smem_len)
+ line_length = calc_line_length(par, vxres, bpp);
+
+ if (vyres * line_length > info->fix.smem_len)
FAIL("not enough video RAM");
h_sync_pol = sync & FB_SYNC_HOR_HIGH_ACT ? 0 : 1;
@@ -969,7 +990,9 @@
crtc->xoffset = xoffset;
crtc->yoffset = yoffset;
crtc->bpp = bpp;
- crtc->off_pitch = ((yoffset*vxres+xoffset)*bpp/64) | (vxres<<19);
+ crtc->off_pitch =
+ ((yoffset * line_length + xoffset * bpp / 8) / 8) |
+ ((line_length / bpp) << 22);
crtc->vline_crnt_vline = 0;
crtc->h_tot_disp = h_total | (h_disp<<16);
@@ -1394,7 +1417,9 @@
}
aty_st_8(DAC_MASK, 0xff, par);
- info->fix.line_length = var->xres_virtual * var->bits_per_pixel/8;
+ info->fix.line_length = calc_line_length(par, var->xres_virtual,
+ var->bits_per_pixel);
+
info->fix.visual = var->bits_per_pixel <= 8 ?
FB_VISUAL_PSEUDOCOLOR : FB_VISUAL_DIRECTCOLOR;
@@ -1505,10 +1530,12 @@
{
u32 xoffset = info->var.xoffset;
u32 yoffset = info->var.yoffset;
- u32 vxres = par->crtc.vxres;
+ u32 line_length = info->fix.line_length;
u32 bpp = info->var.bits_per_pixel;
- par->crtc.off_pitch = ((yoffset * vxres + xoffset) * bpp / 64) | (vxres << 19);
+ par->crtc.off_pitch =
+ ((yoffset * line_length + xoffset * bpp / 8) / 8) |
+ ((line_length / bpp) << 22);
}
@@ -2201,7 +2228,7 @@
const int *refresh_tbl;
int i, size;
- if (IS_XL(par->pci_id) || IS_MOBILITY(par->pci_id)) {
+ if (M64_HAS(XL_MEM)) {
refresh_tbl = ragexl_tbl;
size = ARRAY_SIZE(ragexl_tbl);
} else {
@@ -2335,7 +2362,10 @@
par->pll_ops = &aty_pll_ct;
par->bus_type = PCI;
par->ram_type = (aty_ld_le32(CNFG_STAT0, par) & 0x07);
- ramname = aty_ct_ram[par->ram_type];
+ if (M64_HAS(XL_MEM))
+ ramname = aty_xl_ram[par->ram_type];
+ else
+ ramname = aty_ct_ram[par->ram_type];
/* for many chips, the mclk is 67 MHz for SDRAM, 63 MHz otherwise */
if (par->pll_limits.mclk == 67 && par->ram_type < SDRAM)
par->pll_limits.mclk = 63;
@@ -2390,9 +2420,9 @@
#endif /* CONFIG_FB_ATY_CT */
/* save previous video mode */
- aty_get_crtc(par, &saved_crtc);
+ aty_get_crtc(par, &par->saved_crtc);
if(par->pll_ops->get_pll)
- par->pll_ops->get_pll(info, &saved_pll);
+ par->pll_ops->get_pll(info, &par->saved_pll);
par->mem_cntl = aty_ld_le32(MEM_CNTL, par);
gtb_memsize = M64_HAS(GTB_DSP);
@@ -2667,8 +2697,8 @@
aty_init_exit:
/* restore video mode */
- aty_set_crtc(par, &saved_crtc);
- par->pll_ops->set_pll(info, &saved_pll);
+ aty_set_crtc(par, &par->saved_crtc);
+ par->pll_ops->set_pll(info, &par->saved_pll);
#ifdef CONFIG_MTRR
if (par->mtrr_reg >= 0) {
@@ -3502,6 +3532,11 @@
par->mmap_map[1].prot_flag = _PAGE_E;
#endif /* __sparc__ */
+ mutex_lock(&reboot_lock);
+ if (!reboot_info)
+ reboot_info = info;
+ mutex_unlock(&reboot_lock);
+
return 0;
err_release_io:
@@ -3614,8 +3649,8 @@
struct atyfb_par *par = (struct atyfb_par *) info->par;
/* restore video mode */
- aty_set_crtc(par, &saved_crtc);
- par->pll_ops->set_pll(info, &saved_pll);
+ aty_set_crtc(par, &par->saved_crtc);
+ par->pll_ops->set_pll(info, &par->saved_pll);
unregister_framebuffer(info);
@@ -3661,6 +3696,11 @@
{
struct fb_info *info = pci_get_drvdata(pdev);
+ mutex_lock(&reboot_lock);
+ if (reboot_info == info)
+ reboot_info = NULL;
+ mutex_unlock(&reboot_lock);
+
atyfb_remove(info);
}
@@ -3808,6 +3848,56 @@
}
#endif /* MODULE */
+static int atyfb_reboot_notify(struct notifier_block *nb,
+ unsigned long code, void *unused)
+{
+ struct atyfb_par *par;
+
+ if (code != SYS_RESTART)
+ return NOTIFY_DONE;
+
+ mutex_lock(&reboot_lock);
+
+ if (!reboot_info)
+ goto out;
+
+ if (!lock_fb_info(reboot_info))
+ goto out;
+
+ par = reboot_info->par;
+
+ /*
+ * HP OmniBook 500's BIOS doesn't like the state of the
+ * hardware after atyfb has been used. Restore the hardware
+ * to the original state to allow successful reboots.
+ */
+ aty_set_crtc(par, &par->saved_crtc);
+ par->pll_ops->set_pll(reboot_info, &par->saved_pll);
+
+ unlock_fb_info(reboot_info);
+ out:
+ mutex_unlock(&reboot_lock);
+
+ return NOTIFY_DONE;
+}
+
+static struct notifier_block atyfb_reboot_notifier = {
+ .notifier_call = atyfb_reboot_notify,
+};
+
+static const struct dmi_system_id atyfb_reboot_ids[] = {
+ {
+ .ident = "HP OmniBook 500",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "HP OmniBook PC"),
+ DMI_MATCH(DMI_PRODUCT_VERSION, "HP OmniBook 500 FA"),
+ },
+ },
+
+ { }
+};
+
static int __init atyfb_init(void)
{
int err1 = 1, err2 = 1;
@@ -3826,11 +3916,20 @@
err2 = atyfb_atari_probe();
#endif
- return (err1 && err2) ? -ENODEV : 0;
+ if (err1 && err2)
+ return -ENODEV;
+
+ if (dmi_check_system(atyfb_reboot_ids))
+ register_reboot_notifier(&atyfb_reboot_notifier);
+
+ return 0;
}
static void __exit atyfb_exit(void)
{
+ if (dmi_check_system(atyfb_reboot_ids))
+ unregister_reboot_notifier(&atyfb_reboot_notifier);
+
#ifdef CONFIG_PCI
pci_unregister_driver(&atyfb_driver);
#endif
diff --git a/drivers/video/aty/mach64_accel.c b/drivers/video/aty/mach64_accel.c
index 0cc9724..51fcc0a 100644
--- a/drivers/video/aty/mach64_accel.c
+++ b/drivers/video/aty/mach64_accel.c
@@ -63,14 +63,17 @@
void aty_init_engine(struct atyfb_par *par, struct fb_info *info)
{
u32 pitch_value;
+ u32 vxres;
/* determine modal information from global mode structure */
- pitch_value = info->var.xres_virtual;
+ pitch_value = info->fix.line_length / (info->var.bits_per_pixel / 8);
+ vxres = info->var.xres_virtual;
if (info->var.bits_per_pixel == 24) {
/* In 24 bpp, the engine is in 8 bpp - this requires that all */
/* horizontal coordinates and widths must be adjusted */
pitch_value *= 3;
+ vxres *= 3;
}
/* On GTC (RagePro), we need to reset the 3D engine before */
@@ -133,7 +136,7 @@
aty_st_le32(SC_LEFT, 0, par);
aty_st_le32(SC_TOP, 0, par);
aty_st_le32(SC_BOTTOM, par->crtc.vyres - 1, par);
- aty_st_le32(SC_RIGHT, pitch_value - 1, par);
+ aty_st_le32(SC_RIGHT, vxres - 1, par);
/* set background color to minimum value (usually BLACK) */
aty_st_le32(DP_BKGD_CLR, 0, par);
diff --git a/drivers/video/backlight/tdo24m.c b/drivers/video/backlight/tdo24m.c
index 1dae7f8..51422fc 100644
--- a/drivers/video/backlight/tdo24m.c
+++ b/drivers/video/backlight/tdo24m.c
@@ -356,7 +356,7 @@
lcd->power = FB_BLANK_POWERDOWN;
lcd->mode = MODE_VGA; /* default to VGA */
- lcd->buf = kmalloc(TDO24M_SPI_BUFF_SIZE, sizeof(GFP_KERNEL));
+ lcd->buf = kmalloc(TDO24M_SPI_BUFF_SIZE, GFP_KERNEL);
if (lcd->buf == NULL) {
kfree(lcd);
return -ENOMEM;
diff --git a/drivers/video/cobalt_lcdfb.c b/drivers/video/cobalt_lcdfb.c
index 7bad24e..108b89e 100644
--- a/drivers/video/cobalt_lcdfb.c
+++ b/drivers/video/cobalt_lcdfb.c
@@ -1,7 +1,7 @@
/*
* Cobalt server LCD frame buffer driver.
*
- * Copyright (C) 2008 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ * Copyright (C) 2008 Yoichi Yuasa <yuasa@linux-mips.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
diff --git a/drivers/video/fbmem.c b/drivers/video/fbmem.c
index f8a09bf..a85c818 100644
--- a/drivers/video/fbmem.c
+++ b/drivers/video/fbmem.c
@@ -16,7 +16,6 @@
#include <linux/compat.h>
#include <linux/types.h>
#include <linux/errno.h>
-#include <linux/smp_lock.h>
#include <linux/kernel.h>
#include <linux/major.h>
#include <linux/slab.h>
@@ -1310,8 +1309,6 @@
static int
fb_mmap(struct file *file, struct vm_area_struct * vma)
-__acquires(&info->lock)
-__releases(&info->lock)
{
int fbidx = iminor(file->f_path.dentry->d_inode);
struct fb_info *info = registered_fb[fbidx];
@@ -1325,16 +1322,14 @@
off = vma->vm_pgoff << PAGE_SHIFT;
if (!fb)
return -ENODEV;
+ mutex_lock(&info->mm_lock);
if (fb->fb_mmap) {
int res;
- mutex_lock(&info->lock);
res = fb->fb_mmap(info, vma);
- mutex_unlock(&info->lock);
+ mutex_unlock(&info->mm_lock);
return res;
}
- mutex_lock(&info->lock);
-
/* frame buffer memory */
start = info->fix.smem_start;
len = PAGE_ALIGN((start & ~PAGE_MASK) + info->fix.smem_len);
@@ -1342,13 +1337,13 @@
/* memory mapped io */
off -= len;
if (info->var.accel_flags) {
- mutex_unlock(&info->lock);
+ mutex_unlock(&info->mm_lock);
return -EINVAL;
}
start = info->fix.mmio_start;
len = PAGE_ALIGN((start & ~PAGE_MASK) + info->fix.mmio_len);
}
- mutex_unlock(&info->lock);
+ mutex_unlock(&info->mm_lock);
start &= PAGE_MASK;
if ((vma->vm_end - vma->vm_start + off) > len)
return -EINVAL;
@@ -1518,6 +1513,7 @@
break;
fb_info->node = i;
mutex_init(&fb_info->lock);
+ mutex_init(&fb_info->mm_lock);
fb_info->dev = device_create(fb_class, fb_info->device,
MKDEV(FB_MAJOR, i), NULL, "fb%d", i);
diff --git a/drivers/video/fsl-diu-fb.c b/drivers/video/fsl-diu-fb.c
index f153c58..72d68b3 100644
--- a/drivers/video/fsl-diu-fb.c
+++ b/drivers/video/fsl-diu-fb.c
@@ -750,24 +750,26 @@
static int map_video_memory(struct fb_info *info)
{
phys_addr_t phys;
+ u32 smem_len = info->fix.line_length * info->var.yres_virtual;
pr_debug("info->var.xres_virtual = %d\n", info->var.xres_virtual);
pr_debug("info->var.yres_virtual = %d\n", info->var.yres_virtual);
pr_debug("info->fix.line_length = %d\n", info->fix.line_length);
+ pr_debug("MAP_VIDEO_MEMORY: smem_len = %u\n", smem_len);
- info->fix.smem_len = info->fix.line_length * info->var.yres_virtual;
- pr_debug("MAP_VIDEO_MEMORY: smem_len = %d\n", info->fix.smem_len);
- info->screen_base = fsl_diu_alloc(info->fix.smem_len, &phys);
+ info->screen_base = fsl_diu_alloc(smem_len, &phys);
if (info->screen_base == NULL) {
printk(KERN_ERR "Unable to allocate fb memory\n");
return -ENOMEM;
}
+ mutex_lock(&info->mm_lock);
info->fix.smem_start = (unsigned long) phys;
+ info->fix.smem_len = smem_len;
+ mutex_unlock(&info->mm_lock);
info->screen_size = info->fix.smem_len;
pr_debug("Allocated fb @ paddr=0x%08lx, size=%d.\n",
- info->fix.smem_start,
- info->fix.smem_len);
+ info->fix.smem_start, info->fix.smem_len);
pr_debug("screen base %p\n", info->screen_base);
return 0;
@@ -776,9 +778,11 @@
static void unmap_video_memory(struct fb_info *info)
{
fsl_diu_free(info->screen_base, info->fix.smem_len);
+ mutex_lock(&info->mm_lock);
info->screen_base = NULL;
info->fix.smem_start = 0;
info->fix.smem_len = 0;
+ mutex_unlock(&info->mm_lock);
}
/*
@@ -1219,12 +1223,6 @@
return -EINVAL;
}
- if (fsl_diu_set_par(info)) {
- printk(KERN_ERR "fb_set_par failed");
- fb_dealloc_cmap(&info->cmap);
- return -EINVAL;
- }
-
if (register_framebuffer(info) < 0) {
printk(KERN_ERR "register_framebuffer failed");
unmap_video_memory(info);
diff --git a/drivers/video/hitfb.c b/drivers/video/hitfb.c
index 020db7f..e7116a6 100644
--- a/drivers/video/hitfb.c
+++ b/drivers/video/hitfb.c
@@ -44,9 +44,6 @@
.accel = FB_ACCEL_NONE,
};
-static u32 pseudo_palette[16];
-static struct fb_info fb_info;
-
static inline void hitfb_accel_wait(void)
{
while (fb_readw(HD64461_GRCFGR) & HD64461_GRCFGR_ACCSTATUS) ;
@@ -331,6 +328,8 @@
static int __init hitfb_probe(struct platform_device *dev)
{
unsigned short lcdclor, ldr3, ldvndr;
+ struct fb_info *info;
+ int ret;
if (fb_get_options("hitfb", NULL))
return -ENODEV;
@@ -384,32 +383,53 @@
break;
}
- fb_info.fbops = &hitfb_ops;
- fb_info.var = hitfb_var;
- fb_info.fix = hitfb_fix;
- fb_info.pseudo_palette = pseudo_palette;
- fb_info.flags = FBINFO_DEFAULT | FBINFO_HWACCEL_YPAN |
+ info = framebuffer_alloc(sizeof(u32) * 16, &dev->dev);
+ if (unlikely(!info))
+ return -ENOMEM;
+
+ info->fbops = &hitfb_ops;
+ info->var = hitfb_var;
+ info->fix = hitfb_fix;
+ info->pseudo_palette = info->par;
+ info->flags = FBINFO_DEFAULT | FBINFO_HWACCEL_YPAN |
FBINFO_HWACCEL_FILLRECT | FBINFO_HWACCEL_COPYAREA;
- fb_info.screen_base = (void *)hitfb_fix.smem_start;
+ info->screen_base = (void *)hitfb_fix.smem_start;
- fb_alloc_cmap(&fb_info.cmap, 256, 0);
+ ret = fb_alloc_cmap(&info->cmap, 256, 0);
+ if (unlikely(ret < 0))
+ goto err_fb;
- if (register_framebuffer(&fb_info) < 0)
- return -EINVAL;
+ ret = register_framebuffer(info);
+ if (unlikely(ret < 0))
+ goto err;
+
+ platform_set_drvdata(dev, info);
printk(KERN_INFO "fb%d: %s frame buffer device\n",
- fb_info.node, fb_info.fix.id);
+ info->node, info->fix.id);
+
return 0;
+
+err:
+ fb_dealloc_cmap(&info->cmap);
+err_fb:
+ framebuffer_release(info);
+ return ret;
}
static int __exit hitfb_remove(struct platform_device *dev)
{
- return unregister_framebuffer(&fb_info);
+ struct fb_info *info = platform_get_drvdata(dev);
+
+ unregister_framebuffer(info);
+ fb_dealloc_cmap(&info->cmap);
+ framebuffer_release(info);
+
+ return 0;
}
-#ifdef CONFIG_PM
-static int hitfb_suspend(struct platform_device *dev, pm_message_t state)
+static int hitfb_suspend(struct device *dev)
{
u16 v;
@@ -421,7 +441,7 @@
return 0;
}
-static int hitfb_resume(struct platform_device *dev)
+static int hitfb_resume(struct device *dev)
{
u16 v;
@@ -435,17 +455,19 @@
return 0;
}
-#endif
+
+static struct dev_pm_ops hitfb_dev_pm_ops = {
+ .suspend = hitfb_suspend,
+ .resume = hitfb_resume,
+};
static struct platform_driver hitfb_driver = {
.probe = hitfb_probe,
.remove = __exit_p(hitfb_remove),
-#ifdef CONFIG_PM
- .suspend = hitfb_suspend,
- .resume = hitfb_resume,
-#endif
.driver = {
.name = "hitfb",
+ .owner = THIS_MODULE,
+ .pm = &hitfb_dev_pm_ops,
},
};
diff --git a/drivers/video/i810/i810_main.c b/drivers/video/i810/i810_main.c
index 2e94019..5743ea2 100644
--- a/drivers/video/i810/i810_main.c
+++ b/drivers/video/i810/i810_main.c
@@ -1090,8 +1090,10 @@
memset(fix, 0, sizeof(struct fb_fix_screeninfo));
strcpy(fix->id, "I810");
+ mutex_lock(&info->mm_lock);
fix->smem_start = par->fb.physical;
fix->smem_len = par->fb.size;
+ mutex_unlock(&info->mm_lock);
fix->type = FB_TYPE_PACKED_PIXELS;
fix->type_aux = 0;
fix->xpanstep = 8;
@@ -2058,8 +2060,7 @@
fb_var_to_videomode(&mode, &info->var);
fb_add_videomode(&mode, &info->modelist);
- encode_fix(&info->fix, info);
-
+
i810fb_init_ringbuffer(info);
err = register_framebuffer(info);
diff --git a/drivers/video/matrox/matroxfb_DAC1064.c b/drivers/video/matrox/matroxfb_DAC1064.c
index 0ce3b0a..a74e5da 100644
--- a/drivers/video/matrox/matroxfb_DAC1064.c
+++ b/drivers/video/matrox/matroxfb_DAC1064.c
@@ -454,9 +454,9 @@
dprintk(KERN_DEBUG "DAC1064regs ");
for (i = 0; i < sizeof(MGA1064_DAC_regs); i++) {
dprintk("R%02X=%02X ", MGA1064_DAC_regs[i], ACCESS_FBINFO(hw).DACreg[i]);
- if ((i & 0x7) == 0x7) dprintk("\n" KERN_DEBUG "continuing... ");
+ if ((i & 0x7) == 0x7) dprintk(KERN_DEBUG "continuing... ");
}
- dprintk("\n" KERN_DEBUG "DAC1064clk ");
+ dprintk(KERN_DEBUG "DAC1064clk ");
for (i = 0; i < 6; i++)
dprintk("C%02X=%02X ", i, ACCESS_FBINFO(hw).DACclk[i]);
dprintk("\n");
diff --git a/drivers/video/matrox/matroxfb_Ti3026.c b/drivers/video/matrox/matroxfb_Ti3026.c
index 1352482..4e82511 100644
--- a/drivers/video/matrox/matroxfb_Ti3026.c
+++ b/drivers/video/matrox/matroxfb_Ti3026.c
@@ -651,9 +651,9 @@
dprintk(KERN_DEBUG "3026DACregs ");
for (i = 0; i < 21; i++) {
dprintk("R%02X=%02X ", DACseq[i], hw->DACreg[i]);
- if ((i & 0x7) == 0x7) dprintk("\n" KERN_DEBUG "continuing... ");
+ if ((i & 0x7) == 0x7) dprintk(KERN_DEBUG "continuing... ");
}
- dprintk("\n" KERN_DEBUG "DACclk ");
+ dprintk(KERN_DEBUG "DACclk ");
for (i = 0; i < 6; i++)
dprintk("C%02X=%02X ", i, hw->DACclk[i]);
dprintk("\n");
diff --git a/drivers/video/matrox/matroxfb_base.c b/drivers/video/matrox/matroxfb_base.c
index 8e7a275..0c1049b 100644
--- a/drivers/video/matrox/matroxfb_base.c
+++ b/drivers/video/matrox/matroxfb_base.c
@@ -724,8 +724,10 @@
struct fb_fix_screeninfo *fix = &ACCESS_FBINFO(fbcon).fix;
DBG(__func__)
+ mutex_lock(&ACCESS_FBINFO(fbcon).mm_lock);
fix->smem_start = ACCESS_FBINFO(video.base) + ACCESS_FBINFO(curr.ydstorg.bytes);
fix->smem_len = ACCESS_FBINFO(video.len_usable) - ACCESS_FBINFO(curr.ydstorg.bytes);
+ mutex_unlock(&ACCESS_FBINFO(fbcon).mm_lock);
}
static int matroxfb_check_var(struct fb_var_screeninfo *var, struct fb_info *info)
@@ -1874,7 +1876,6 @@
}
matroxfb_init_fix(PMINFO2);
ACCESS_FBINFO(fbcon.screen_base) = vaddr_va(ACCESS_FBINFO(video.vbase));
- matroxfb_update_fix(PMINFO2);
/* Normalize values (namely yres_virtual) */
matroxfb_check_var(&vesafb_defined, &ACCESS_FBINFO(fbcon));
/* And put it into "current" var. Do NOT program hardware yet, or we'll not take over
@@ -2081,6 +2082,7 @@
spin_lock_init(&ACCESS_FBINFO(lock.accel));
init_rwsem(&ACCESS_FBINFO(crtc2.lock));
init_rwsem(&ACCESS_FBINFO(altout.lock));
+ mutex_init(&ACCESS_FBINFO(fbcon).mm_lock);
ACCESS_FBINFO(irq_flags) = 0;
init_waitqueue_head(&ACCESS_FBINFO(crtc1.vsync.wait));
init_waitqueue_head(&ACCESS_FBINFO(crtc2.vsync.wait));
diff --git a/drivers/video/matrox/matroxfb_crtc2.c b/drivers/video/matrox/matroxfb_crtc2.c
index 7ac4c5f..ebcb5c6 100644
--- a/drivers/video/matrox/matroxfb_crtc2.c
+++ b/drivers/video/matrox/matroxfb_crtc2.c
@@ -289,7 +289,12 @@
#undef m2info
}
-static void matroxfb_dh_init_fix(struct matroxfb_dh_fb_info *m2info) {
+/*
+ * This function is called before the register_framebuffer so
+ * no locking is needed.
+ */
+static void matroxfb_dh_init_fix(struct matroxfb_dh_fb_info *m2info)
+{
struct fb_fix_screeninfo *fix = &m2info->fbcon.fix;
strcpy(fix->id, "MATROX DH");
diff --git a/drivers/video/mx3fb.c b/drivers/video/mx3fb.c
index b7af525..f8778cd 100644
--- a/drivers/video/mx3fb.c
+++ b/drivers/video/mx3fb.c
@@ -669,7 +669,7 @@
}
static int mx3fb_blank(int blank, struct fb_info *fbi);
-static int mx3fb_map_video_memory(struct fb_info *fbi);
+static int mx3fb_map_video_memory(struct fb_info *fbi, unsigned int mem_len);
static int mx3fb_unmap_video_memory(struct fb_info *fbi);
/**
@@ -742,8 +742,7 @@
if (fbi->fix.smem_start)
mx3fb_unmap_video_memory(fbi);
- fbi->fix.smem_len = mem_len;
- if (mx3fb_map_video_memory(fbi) < 0) {
+ if (mx3fb_map_video_memory(fbi, mem_len) < 0) {
mutex_unlock(&mx3_fbi->mutex);
return -ENOMEM;
}
@@ -1198,6 +1197,7 @@
/**
* mx3fb_map_video_memory() - allocates the DRAM memory for the frame buffer.
* @fbi: framebuffer information pointer
+ * @mem_len: length of mapped memory
* @return: Error code indicating success or failure
*
* This buffer is remapped into a non-cached, non-buffered, memory region to
@@ -1205,23 +1205,26 @@
* area is remapped, all virtual memory access to the video memory should occur
* at the new region.
*/
-static int mx3fb_map_video_memory(struct fb_info *fbi)
+static int mx3fb_map_video_memory(struct fb_info *fbi, unsigned int mem_len)
{
int retval = 0;
dma_addr_t addr;
fbi->screen_base = dma_alloc_writecombine(fbi->device,
- fbi->fix.smem_len,
+ mem_len,
&addr, GFP_DMA);
if (!fbi->screen_base) {
dev_err(fbi->device, "Cannot allocate %u bytes framebuffer memory\n",
- fbi->fix.smem_len);
+ mem_len);
retval = -EBUSY;
goto err0;
}
+ mutex_lock(&fbi->mm_lock);
fbi->fix.smem_start = addr;
+ fbi->fix.smem_len = mem_len;
+ mutex_unlock(&fbi->mm_lock);
dev_dbg(fbi->device, "allocated fb @ p=0x%08x, v=0x%p, size=%d.\n",
(uint32_t) fbi->fix.smem_start, fbi->screen_base, fbi->fix.smem_len);
@@ -1251,8 +1254,10 @@
fbi->screen_base, fbi->fix.smem_start);
fbi->screen_base = 0;
+ mutex_lock(&fbi->mm_lock);
fbi->fix.smem_start = 0;
fbi->fix.smem_len = 0;
+ mutex_unlock(&fbi->mm_lock);
return 0;
}
@@ -1360,11 +1365,6 @@
init_completion(&mx3fbi->flip_cmpl);
disable_irq(ichan->eof_irq);
dev_dbg(mx3fb->dev, "disabling irq %d\n", ichan->eof_irq);
- ret = mx3fb_set_par(fbi);
- if (ret < 0)
- goto esetpar;
-
- mx3fb_blank(FB_BLANK_UNBLANK, fbi);
dev_info(dev, "registered, using mode %s\n", fb_mode);
diff --git a/drivers/video/omap/omapfb_main.c b/drivers/video/omap/omapfb_main.c
index 060d72f..8862233 100644
--- a/drivers/video/omap/omapfb_main.c
+++ b/drivers/video/omap/omapfb_main.c
@@ -393,8 +393,10 @@
rg = &plane->fbdev->mem_desc.region[plane->idx];
fbi->screen_base = rg->vaddr;
+ mutex_lock(&fbi->mm_lock);
fix->smem_start = rg->paddr;
fix->smem_len = rg->size;
+ mutex_unlock(&fbi->mm_lock);
fix->type = FB_TYPE_PACKED_PIXELS;
bpp = var->bits_per_pixel;
@@ -886,8 +888,10 @@
* plane memory is dealloce'd, the other
* screen parameters in var / fix are invalid.
*/
+ mutex_lock(&fbi->mm_lock);
fbi->fix.smem_start = 0;
fbi->fix.smem_len = 0;
+ mutex_unlock(&fbi->mm_lock);
}
}
}
@@ -1250,7 +1254,7 @@
static ssize_t omapfb_show_caps_num(struct device *dev,
struct device_attribute *attr, char *buf)
{
- struct omapfb_device *fbdev = (struct omapfb_device *)dev->driver_data;
+ struct omapfb_device *fbdev = dev_get_drvdata(dev);
int plane;
size_t size;
struct omapfb_caps caps;
@@ -1270,7 +1274,7 @@
static ssize_t omapfb_show_caps_text(struct device *dev,
struct device_attribute *attr, char *buf)
{
- struct omapfb_device *fbdev = (struct omapfb_device *)dev->driver_data;
+ struct omapfb_device *fbdev = dev_get_drvdata(dev);
int i;
struct omapfb_caps caps;
int plane;
@@ -1317,7 +1321,7 @@
static ssize_t omapfb_show_panel_name(struct device *dev,
struct device_attribute *attr, char *buf)
{
- struct omapfb_device *fbdev = (struct omapfb_device *)dev->driver_data;
+ struct omapfb_device *fbdev = dev_get_drvdata(dev);
return snprintf(buf, PAGE_SIZE, "%s\n", fbdev->panel->name);
}
@@ -1326,7 +1330,7 @@
struct device_attribute *attr,
char *buf)
{
- struct omapfb_device *fbdev = (struct omapfb_device *)dev->driver_data;
+ struct omapfb_device *fbdev = dev_get_drvdata(dev);
int r;
if (fbdev->panel->get_bklight_level) {
@@ -1341,7 +1345,7 @@
struct device_attribute *attr,
const char *buf, size_t size)
{
- struct omapfb_device *fbdev = (struct omapfb_device *)dev->driver_data;
+ struct omapfb_device *fbdev = dev_get_drvdata(dev);
int r;
if (fbdev->panel->set_bklight_level) {
@@ -1360,7 +1364,7 @@
static ssize_t omapfb_show_bklight_max(struct device *dev,
struct device_attribute *attr, char *buf)
{
- struct omapfb_device *fbdev = (struct omapfb_device *)dev->driver_data;
+ struct omapfb_device *fbdev = dev_get_drvdata(dev);
int r;
if (fbdev->panel->get_bklight_level) {
@@ -1393,7 +1397,7 @@
static ssize_t omapfb_show_ctrl_name(struct device *dev,
struct device_attribute *attr, char *buf)
{
- struct omapfb_device *fbdev = (struct omapfb_device *)dev->driver_data;
+ struct omapfb_device *fbdev = dev_get_drvdata(dev);
return snprintf(buf, PAGE_SIZE, "%s\n", fbdev->ctrl->name);
}
diff --git a/drivers/video/platinumfb.c b/drivers/video/platinumfb.c
index 03b3670..bacfabd 100644
--- a/drivers/video/platinumfb.c
+++ b/drivers/video/platinumfb.c
@@ -141,7 +141,9 @@
offset = 0x10;
info->screen_base = pinfo->frame_buffer + init->fb_offset + offset;
+ mutex_lock(&info->mm_lock);
info->fix.smem_start = (pinfo->frame_buffer_phys) + init->fb_offset + offset;
+ mutex_unlock(&info->mm_lock);
info->fix.visual = (pinfo->cmode == CMODE_8) ?
FB_VISUAL_PSEUDOCOLOR : FB_VISUAL_DIRECTCOLOR;
info->fix.line_length = vmode_attrs[pinfo->vmode-1].hres * (1<<pinfo->cmode)
diff --git a/drivers/video/pxafb.c b/drivers/video/pxafb.c
index 0889d50..6506117 100644
--- a/drivers/video/pxafb.c
+++ b/drivers/video/pxafb.c
@@ -815,8 +815,10 @@
ofb->video_mem_phys = virt_to_phys(ofb->video_mem);
ofb->video_mem_size = size;
+ mutex_lock(&ofb->fb.mm_lock);
ofb->fb.fix.smem_start = ofb->video_mem_phys;
ofb->fb.fix.smem_len = ofb->fb.fix.line_length * var->yres_virtual;
+ mutex_unlock(&ofb->fb.mm_lock);
ofb->fb.screen_base = ofb->video_mem;
return 0;
}
diff --git a/drivers/video/s3c-fb.c b/drivers/video/s3c-fb.c
index 43680e5..bb63c07 100644
--- a/drivers/video/s3c-fb.c
+++ b/drivers/video/s3c-fb.c
@@ -211,23 +211,21 @@
/**
* s3c_fb_calc_pixclk() - calculate the divider to create the pixel clock.
+ * @id: window id.
* @sfb: The hardware state.
* @pixclock: The pixel clock wanted, in picoseconds.
*
* Given the specified pixel clock, work out the necessary divider to get
* close to the output frequency.
*/
-static int s3c_fb_calc_pixclk(struct s3c_fb *sfb, unsigned int pixclk)
+static int s3c_fb_calc_pixclk(unsigned char id, struct s3c_fb *sfb, unsigned int pixclk)
{
+ struct s3c_fb_pd_win *win = sfb->pdata->win[id];
unsigned long clk = clk_get_rate(sfb->bus_clk);
- unsigned long long tmp;
unsigned int result;
- tmp = (unsigned long long)clk;
- tmp *= pixclk;
-
- do_div(tmp, 1000000000UL);
- result = (unsigned int)tmp / 1000;
+ pixclk *= win->win_mode.refresh;
+ result = clk / pixclk;
dev_dbg(sfb->dev, "pixclk=%u, clk=%lu, div=%d (%lu)\n",
pixclk, clk, result, clk / result);
@@ -267,6 +265,7 @@
struct s3c_fb *sfb = win->parent;
void __iomem *regs = sfb->regs;
int win_no = win->index;
+ u32 osdc_data = 0;
u32 data;
u32 pagewidth;
int clkdiv;
@@ -302,7 +301,7 @@
/* use window 0 as the basis for the lcd output timings */
if (win_no == 0) {
- clkdiv = s3c_fb_calc_pixclk(sfb, var->pixclock);
+ clkdiv = s3c_fb_calc_pixclk(win_no, sfb, var->pixclock);
data = sfb->pdata->vidcon0;
data &= ~(VIDCON0_CLKVAL_F_MASK | VIDCON0_CLKDIR);
@@ -359,8 +358,6 @@
data = var->xres * var->yres;
- u32 osdc_data = 0;
-
osdc_data = VIDISD14C_ALPHA1_R(0xf) |
VIDISD14C_ALPHA1_G(0xf) |
VIDISD14C_ALPHA1_B(0xf);
diff --git a/drivers/video/sh7760fb.c b/drivers/video/sh7760fb.c
index 653bdfe..9f6d6e6 100644
--- a/drivers/video/sh7760fb.c
+++ b/drivers/video/sh7760fb.c
@@ -120,18 +120,6 @@
return 0;
}
-static void encode_fix(struct fb_fix_screeninfo *fix, struct fb_info *info,
- unsigned long stride)
-{
- memset(fix, 0, sizeof(struct fb_fix_screeninfo));
- strcpy(fix->id, "sh7760-lcdc");
-
- fix->smem_start = (unsigned long)info->screen_base;
- fix->smem_len = info->screen_size;
-
- fix->line_length = stride;
-}
-
static int sh7760fb_get_color_info(struct device *dev,
u16 lddfr, int *bpp, int *gray)
{
@@ -334,7 +322,8 @@
iowrite32(ldsarl, par->base + LDSARL); /* mem for lower half of DSTN */
- encode_fix(&info->fix, info, stride);
+ info->fix.line_length = stride;
+
sh7760fb_check_var(&info->var, info);
sh7760fb_blank(FB_BLANK_UNBLANK, info); /* panel on! */
@@ -435,6 +424,8 @@
info->screen_base = fbmem;
info->screen_size = vram;
+ info->fix.smem_start = (unsigned long)info->screen_base;
+ info->fix.smem_len = info->screen_size;
return 0;
}
@@ -520,6 +511,8 @@
info->var.transp.length = 0;
info->var.transp.msb_right = 0;
+ strcpy(info->fix.id, "sh7760-lcdc");
+
/* set the DON2 bit now, before cmap allocation, as it will randomize
* palette memory.
*/
diff --git a/drivers/video/sh_mobile_lcdcfb.c b/drivers/video/sh_mobile_lcdcfb.c
index f10d2fb..8f24564 100644
--- a/drivers/video/sh_mobile_lcdcfb.c
+++ b/drivers/video/sh_mobile_lcdcfb.c
@@ -17,6 +17,7 @@
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
#include <linux/interrupt.h>
+#include <linux/vmalloc.h>
#include <video/sh_mobile_lcdc.h>
#include <asm/atomic.h>
@@ -30,9 +31,10 @@
unsigned long enabled; /* ME and SE in LDCNT2R */
struct sh_mobile_lcdc_chan_cfg cfg;
u32 pseudo_palette[PALETTE_NR];
- struct fb_info info;
+ struct fb_info *info;
dma_addr_t dma_handle;
struct fb_deferred_io defio;
+ struct scatterlist *sglist;
unsigned long frame_end;
wait_queue_head_t frame_end_wait;
};
@@ -206,16 +208,38 @@
static void sh_mobile_lcdc_clk_off(struct sh_mobile_lcdc_priv *priv) {}
#endif
+static int sh_mobile_lcdc_sginit(struct fb_info *info,
+ struct list_head *pagelist)
+{
+ struct sh_mobile_lcdc_chan *ch = info->par;
+ unsigned int nr_pages_max = info->fix.smem_len >> PAGE_SHIFT;
+ struct page *page;
+ int nr_pages = 0;
+
+ sg_init_table(ch->sglist, nr_pages_max);
+
+ list_for_each_entry(page, pagelist, lru)
+ sg_set_page(&ch->sglist[nr_pages++], page, PAGE_SIZE, 0);
+
+ return nr_pages;
+}
+
static void sh_mobile_lcdc_deferred_io(struct fb_info *info,
struct list_head *pagelist)
{
struct sh_mobile_lcdc_chan *ch = info->par;
+ unsigned int nr_pages;
/* enable clocks before accessing hardware */
sh_mobile_lcdc_clk_on(ch->lcdc);
+ nr_pages = sh_mobile_lcdc_sginit(info, pagelist);
+ dma_map_sg(info->dev, ch->sglist, nr_pages, DMA_TO_DEVICE);
+
/* trigger panel update */
lcdc_write_chan(ch, LDSM2R, 1);
+
+ dma_unmap_sg(info->dev, ch->sglist, nr_pages, DMA_TO_DEVICE);
}
static void sh_mobile_lcdc_deferred_io_touch(struct fb_info *info)
@@ -418,22 +442,22 @@
/* set bpp format in PKF[4:0] */
tmp = lcdc_read_chan(ch, LDDFR);
tmp &= ~(0x0001001f);
- tmp |= (priv->ch[k].info.var.bits_per_pixel == 16) ? 3 : 0;
+ tmp |= (ch->info->var.bits_per_pixel == 16) ? 3 : 0;
lcdc_write_chan(ch, LDDFR, tmp);
/* point out our frame buffer */
- lcdc_write_chan(ch, LDSA1R, ch->info.fix.smem_start);
+ lcdc_write_chan(ch, LDSA1R, ch->info->fix.smem_start);
/* set line size */
- lcdc_write_chan(ch, LDMLSR, ch->info.fix.line_length);
+ lcdc_write_chan(ch, LDMLSR, ch->info->fix.line_length);
/* setup deferred io if SYS bus */
tmp = ch->cfg.sys_bus_cfg.deferred_io_msec;
if (ch->ldmt1r_value & (1 << 12) && tmp) {
ch->defio.deferred_io = sh_mobile_lcdc_deferred_io;
ch->defio.delay = msecs_to_jiffies(tmp);
- ch->info.fbdefio = &ch->defio;
- fb_deferred_io_init(&ch->info);
+ ch->info->fbdefio = &ch->defio;
+ fb_deferred_io_init(ch->info);
/* one-shot mode */
lcdc_write_chan(ch, LDSM1R, 1);
@@ -479,12 +503,12 @@
* flush frame, and wait for frame end interrupt
* clean up deferred io and enable clock
*/
- if (ch->info.fbdefio) {
+ if (ch->info->fbdefio) {
ch->frame_end = 0;
- schedule_delayed_work(&ch->info.deferred_work, 0);
+ schedule_delayed_work(&ch->info->deferred_work, 0);
wait_event(ch->frame_end_wait, ch->frame_end);
- fb_deferred_io_cleanup(&ch->info);
- ch->info.fbdefio = NULL;
+ fb_deferred_io_cleanup(ch->info);
+ ch->info->fbdefio = NULL;
sh_mobile_lcdc_clk_on(priv);
}
@@ -793,9 +817,16 @@
priv->base = ioremap_nocache(res->start, (res->end - res->start) + 1);
for (i = 0; i < j; i++) {
- info = &priv->ch[i].info;
cfg = &priv->ch[i].cfg;
+ priv->ch[i].info = framebuffer_alloc(0, &pdev->dev);
+ if (!priv->ch[i].info) {
+ dev_err(&pdev->dev, "unable to allocate fb_info\n");
+ error = -ENOMEM;
+ break;
+ }
+
+ info = priv->ch[i].info;
info->fbops = &sh_mobile_lcdc_ops;
info->var.xres = info->var.xres_virtual = cfg->lcd_cfg.xres;
info->var.yres = info->var.yres_virtual = cfg->lcd_cfg.yres;
@@ -846,21 +877,31 @@
}
for (i = 0; i < j; i++) {
- error = register_framebuffer(&priv->ch[i].info);
+ struct sh_mobile_lcdc_chan *ch = priv->ch + i;
+
+ info = ch->info;
+
+ if (info->fbdefio) {
+ priv->ch->sglist = vmalloc(sizeof(struct scatterlist) *
+ info->fix.smem_len >> PAGE_SHIFT);
+ if (!priv->ch->sglist) {
+ dev_err(&pdev->dev, "cannot allocate sglist\n");
+ goto err1;
+ }
+ }
+
+ error = register_framebuffer(info);
if (error < 0)
goto err1;
- }
- for (i = 0; i < j; i++) {
- info = &priv->ch[i].info;
dev_info(info->dev,
"registered %s/%s as %dx%d %dbpp.\n",
pdev->name,
- (priv->ch[i].cfg.chan == LCDC_CHAN_MAINLCD) ?
+ (ch->cfg.chan == LCDC_CHAN_MAINLCD) ?
"mainlcd" : "sublcd",
- (int) priv->ch[i].cfg.lcd_cfg.xres,
- (int) priv->ch[i].cfg.lcd_cfg.yres,
- priv->ch[i].cfg.bpp);
+ (int) ch->cfg.lcd_cfg.xres,
+ (int) ch->cfg.lcd_cfg.yres,
+ ch->cfg.bpp);
/* deferred io mode: disable clock to save power */
if (info->fbdefio)
@@ -881,20 +922,24 @@
int i;
for (i = 0; i < ARRAY_SIZE(priv->ch); i++)
- if (priv->ch[i].info.dev)
- unregister_framebuffer(&priv->ch[i].info);
+ if (priv->ch[i].info->dev)
+ unregister_framebuffer(priv->ch[i].info);
sh_mobile_lcdc_stop(priv);
for (i = 0; i < ARRAY_SIZE(priv->ch); i++) {
- info = &priv->ch[i].info;
+ info = priv->ch[i].info;
- if (!info->device)
+ if (!info || !info->device)
continue;
+ if (priv->ch[i].sglist)
+ vfree(priv->ch[i].sglist);
+
dma_free_coherent(&pdev->dev, info->fix.smem_len,
info->screen_base, priv->ch[i].dma_handle);
fb_dealloc_cmap(&info->cmap);
+ framebuffer_release(info);
}
#ifdef CONFIG_HAVE_CLK
diff --git a/drivers/video/sis/sis_main.c b/drivers/video/sis/sis_main.c
index 7072d19..4a067f0 100644
--- a/drivers/video/sis/sis_main.c
+++ b/drivers/video/sis/sis_main.c
@@ -1847,8 +1847,10 @@
strcpy(fix->id, ivideo->myid);
+ mutex_lock(&info->mm_lock);
fix->smem_start = ivideo->video_base + ivideo->video_offset;
fix->smem_len = ivideo->sisfb_mem;
+ mutex_unlock(&info->mm_lock);
fix->type = FB_TYPE_PACKED_PIXELS;
fix->type_aux = 0;
fix->visual = (ivideo->video_bpp == 8) ? FB_VISUAL_PSEUDOCOLOR : FB_VISUAL_TRUECOLOR;
@@ -6365,7 +6367,6 @@
sis_fb_info->fix = ivideo->sisfb_fix;
sis_fb_info->screen_base = ivideo->video_vbase + ivideo->video_offset;
sis_fb_info->fbops = &sisfb_ops;
- sisfb_get_fix(&sis_fb_info->fix, -1, sis_fb_info);
sis_fb_info->pseudo_palette = ivideo->pseudo_palette;
fb_alloc_cmap(&sis_fb_info->cmap, 256 , 0);
diff --git a/drivers/video/sm501fb.c b/drivers/video/sm501fb.c
index eb5d73a..924d794 100644
--- a/drivers/video/sm501fb.c
+++ b/drivers/video/sm501fb.c
@@ -145,7 +145,7 @@
#define SM501_MEMF_ACCEL (8)
static int sm501_alloc_mem(struct sm501fb_info *inf, struct sm501_mem *mem,
- unsigned int why, size_t size)
+ unsigned int why, size_t size, u32 smem_len)
{
struct sm501fb_par *par;
struct fb_info *fbi;
@@ -172,7 +172,7 @@
if (ptr > 0)
ptr &= ~(PAGE_SIZE - 1);
- if (fbi && ptr < fbi->fix.smem_len)
+ if (fbi && ptr < smem_len)
return -ENOMEM;
break;
@@ -197,7 +197,7 @@
case SM501_MEMF_ACCEL:
fbi = inf->fb[HEAD_CRT];
- ptr = fbi ? fbi->fix.smem_len : 0;
+ ptr = fbi ? smem_len : 0;
fbi = inf->fb[HEAD_PANEL];
if (fbi) {
@@ -413,6 +413,7 @@
unsigned int mem_type;
unsigned int clock_type;
unsigned int head_addr;
+ unsigned int smem_len;
dev_dbg(fbi->dev, "%s: %dx%d, bpp = %d, virtual %dx%d\n",
__func__, var->xres, var->yres, var->bits_per_pixel,
@@ -453,18 +454,20 @@
/* allocate fb memory within 501 */
info->fix.line_length = (var->xres_virtual * var->bits_per_pixel)/8;
- info->fix.smem_len = info->fix.line_length * var->yres_virtual;
+ smem_len = info->fix.line_length * var->yres_virtual;
dev_dbg(fbi->dev, "%s: line length = %u\n", __func__,
info->fix.line_length);
- if (sm501_alloc_mem(fbi, &par->screen, mem_type,
- info->fix.smem_len)) {
+ if (sm501_alloc_mem(fbi, &par->screen, mem_type, smem_len, smem_len)) {
dev_err(fbi->dev, "no memory available\n");
return -ENOMEM;
}
+ mutex_lock(&info->mm_lock);
info->fix.smem_start = fbi->fbmem_res->start + par->screen.sm_addr;
+ info->fix.smem_len = smem_len;
+ mutex_unlock(&info->mm_lock);
info->screen_base = fbi->fbmem + par->screen.sm_addr;
info->screen_size = info->fix.smem_len;
@@ -637,7 +640,8 @@
if ((control & SM501_DC_CRT_CONTROL_SEL) == 0) {
/* the head is displaying panel data... */
- sm501_alloc_mem(fbi, &par->screen, SM501_MEMF_CRT, 0);
+ sm501_alloc_mem(fbi, &par->screen, SM501_MEMF_CRT, 0,
+ info->fix.smem_len);
goto out_update;
}
@@ -1289,7 +1293,8 @@
par->cursor_regs = info->regs + reg_base;
- ret = sm501_alloc_mem(info, &par->cursor, SM501_MEMF_CURSOR, 1024);
+ ret = sm501_alloc_mem(info, &par->cursor, SM501_MEMF_CURSOR, 1024,
+ fbi->fix.smem_len);
if (ret < 0)
return ret;
@@ -1535,9 +1540,6 @@
if (ret)
dev_err(info->dev, "check_var() failed on initial setup?\n");
- /* ensure we've activated our new configuration */
- (fb->fbops->fb_set_par)(fb);
-
return 0;
}
@@ -1619,6 +1621,8 @@
if (!fbi)
return 0;
+ mutex_init(&info->fb[head]->mm_lock);
+
ret = sm501fb_init_fb(info->fb[head], head, drvname);
if (ret) {
dev_err(info->dev, "cannot initialise fb %s\n", drvname);
diff --git a/drivers/video/stifb.c b/drivers/video/stifb.c
index eec9dcb..6120f0c 100644
--- a/drivers/video/stifb.c
+++ b/drivers/video/stifb.c
@@ -1115,10 +1115,9 @@
if the device name contains the string "DX" and tell the
user how to reconfigure the card. */
if (strstr(sti->outptr.dev_name, "DX")) {
- printk(KERN_WARNING "WARNING: stifb framebuffer driver does not "
- "support '%s' in double-buffer mode.\n"
- KERN_WARNING "WARNING: Please disable the double-buffer mode "
- "in IPL menu (the PARISC-BIOS).\n",
+ printk(KERN_WARNING
+"WARNING: stifb framebuffer driver does not support '%s' in double-buffer mode.\n"
+"WARNING: Please disable the double-buffer mode in IPL menu (the PARISC-BIOS).\n",
sti->outptr.dev_name);
goto out_err0;
}
diff --git a/drivers/video/w100fb.c b/drivers/video/w100fb.c
index d0674f1..2376f68 100644
--- a/drivers/video/w100fb.c
+++ b/drivers/video/w100fb.c
@@ -523,6 +523,7 @@
info->fix.ywrapstep = 0;
info->fix.line_length = par->xres * BITS_PER_PIXEL / 8;
+ mutex_lock(&info->mm_lock);
if ((par->xres*par->yres*BITS_PER_PIXEL/8) > (MEM_INT_SIZE+1)) {
par->extmem_active = 1;
info->fix.smem_len = par->mach->mem->size+1;
@@ -530,6 +531,7 @@
par->extmem_active = 0;
info->fix.smem_len = MEM_INT_SIZE+1;
}
+ mutex_unlock(&info->mm_lock);
w100fb_activate_var(par);
}
@@ -746,8 +748,6 @@
goto out;
}
- w100fb_set_par(info);
-
if (register_framebuffer(info) < 0) {
err = -EINVAL;
goto out;
diff --git a/drivers/vlynq/Kconfig b/drivers/vlynq/Kconfig
index f654221..a9efb16 100644
--- a/drivers/vlynq/Kconfig
+++ b/drivers/vlynq/Kconfig
@@ -13,7 +13,7 @@
config VLYNQ_DEBUG
bool "VLYNQ bus debug"
- depends on VLYNQ && KERNEL_DEBUG
+ depends on VLYNQ && DEBUG_KERNEL
help
Turn on VLYNQ bus debugging.
diff --git a/drivers/vlynq/vlynq.c b/drivers/vlynq/vlynq.c
index 7335433..f05d2a3 100644
--- a/drivers/vlynq/vlynq.c
+++ b/drivers/vlynq/vlynq.c
@@ -76,7 +76,7 @@
u32 int_device[8];
};
-#ifdef VLYNQ_DEBUG
+#ifdef CONFIG_VLYNQ_DEBUG
static void vlynq_dump_regs(struct vlynq_device *dev)
{
int i;
diff --git a/drivers/watchdog/bcm47xx_wdt.c b/drivers/watchdog/bcm47xx_wdt.c
index 5c7011c..751c003 100644
--- a/drivers/watchdog/bcm47xx_wdt.c
+++ b/drivers/watchdog/bcm47xx_wdt.c
@@ -161,7 +161,7 @@
{
void __user *argp = (void __user *)arg;
int __user *p = argp;
- int new_value, retval = -EINVAL;;
+ int new_value, retval = -EINVAL;
switch (cmd) {
case WDIOC_GETSUPPORT:
diff --git a/drivers/watchdog/sa1100_wdt.c b/drivers/watchdog/sa1100_wdt.c
index ee1caae..0162454 100644
--- a/drivers/watchdog/sa1100_wdt.c
+++ b/drivers/watchdog/sa1100_wdt.c
@@ -38,7 +38,7 @@
static unsigned long oscr_freq;
static unsigned long sa1100wdt_users;
-static int pre_margin;
+static unsigned int pre_margin;
static int boot_status;
/*
@@ -84,6 +84,7 @@
.options = WDIOF_CARDRESET | WDIOF_SETTIMEOUT
| WDIOF_KEEPALIVEPING,
.identity = "SA1100/PXA255 Watchdog",
+ .firmware_version = 1,
};
static long sa1100dog_ioctl(struct file *file, unsigned int cmd,
@@ -118,7 +119,7 @@
if (ret)
break;
- if (time <= 0 || time > 255) {
+ if (time <= 0 || (oscr_freq * (long long)time >= 0xffffffff)) {
ret = -EINVAL;
break;
}
diff --git a/drivers/watchdog/w83627hf_wdt.c b/drivers/watchdog/w83627hf_wdt.c
index 916890a..f201acc 100644
--- a/drivers/watchdog/w83627hf_wdt.c
+++ b/drivers/watchdog/w83627hf_wdt.c
@@ -89,6 +89,11 @@
c = ((inb_p(WDT_EFDR) & 0xf7) | 0x04); /* select WDT0 */
outb_p(0x2b, WDT_EFER);
outb_p(c, WDT_EFDR); /* set GPIO3 to WDT0 */
+ } else if (c == 0x88) { /* W83627EHF */
+ outb_p(0x2d, WDT_EFER); /* select GPIO5 */
+ c = inb_p(WDT_EFDR) & ~0x01; /* PIN77 -> WDT0# */
+ outb_p(0x2d, WDT_EFER);
+ outb_p(c, WDT_EFDR); /* set GPIO5 to WDT0 */
}
outb_p(0x07, WDT_EFER); /* point to logical device number reg */
diff --git a/drivers/watchdog/w83697ug_wdt.c b/drivers/watchdog/w83697ug_wdt.c
index 883b5f7..a6c12de 100644
--- a/drivers/watchdog/w83697ug_wdt.c
+++ b/drivers/watchdog/w83697ug_wdt.c
@@ -149,8 +149,10 @@
{
spin_lock(&io_lock);
- if (w83697ug_select_wd_register() < 0)
+ if (w83697ug_select_wd_register() < 0) {
+ spin_unlock(&io_lock);
return;
+ }
outb_p(0xF4, WDT_EFER); /* Select CRF4 */
outb_p(timeout, WDT_EFDR); /* Write Timeout counter to CRF4 */
diff --git a/drivers/watchdog/wdrtas.c b/drivers/watchdog/wdrtas.c
index a4fe7a3..3bde56b 100644
--- a/drivers/watchdog/wdrtas.c
+++ b/drivers/watchdog/wdrtas.c
@@ -218,16 +218,14 @@
*/
static int wdrtas_get_temperature(void)
{
- long result;
+ int result;
int temperature = 0;
- result = rtas_call(wdrtas_token_get_sensor_state, 2, 2,
- (void *)__pa(&temperature),
- WDRTAS_THERMAL_SENSOR, 0);
+ result = rtas_get_sensor(WDRTAS_THERMAL_SENSOR, 0, &temperature);
if (result < 0)
printk(KERN_WARNING "wdrtas: reading the thermal sensor "
- "faild: %li\n", result);
+ "failed: %i\n", result);
else
temperature = ((temperature * 9) / 5) + 32; /* fahrenheit */
diff --git a/drivers/xen/events.c b/drivers/xen/events.c
index 891d2e9..abad71b 100644
--- a/drivers/xen/events.c
+++ b/drivers/xen/events.c
@@ -927,9 +927,9 @@
void __init xen_init_IRQ(void)
{
int i;
- size_t size = nr_cpu_ids * sizeof(struct cpu_evtchn_s);
- cpu_evtchn_mask_p = alloc_bootmem(size);
+ cpu_evtchn_mask_p = kcalloc(nr_cpu_ids, sizeof(struct cpu_evtchn_s),
+ GFP_KERNEL);
BUG_ON(cpu_evtchn_mask_p == NULL);
init_evtchn_cpu_bindings();
diff --git a/fs/adfs/super.c b/fs/adfs/super.c
index aad92f0..6910a98 100644
--- a/fs/adfs/super.c
+++ b/fs/adfs/super.c
@@ -13,6 +13,7 @@
#include <linux/parser.h>
#include <linux/mount.h>
#include <linux/seq_file.h>
+#include <linux/smp_lock.h>
#include <linux/statfs.h>
#include "adfs.h"
#include "dir_f.h"
diff --git a/fs/afs/dir.c b/fs/afs/dir.c
index 9bd7577..88067f3 100644
--- a/fs/afs/dir.c
+++ b/fs/afs/dir.c
@@ -564,7 +564,7 @@
static int afs_d_revalidate(struct dentry *dentry, struct nameidata *nd)
{
struct afs_vnode *vnode, *dir;
- struct afs_fid fid;
+ struct afs_fid uninitialized_var(fid);
struct dentry *parent;
struct key *key;
void *dir_version;
diff --git a/fs/afs/flock.c b/fs/afs/flock.c
index 210acaf..3ff8bdd 100644
--- a/fs/afs/flock.c
+++ b/fs/afs/flock.c
@@ -432,7 +432,6 @@
list_del_init(&fl->fl_u.afs.link);
if (list_empty(&vnode->granted_locks))
afs_defer_unlock(vnode, key);
- spin_unlock(&vnode->lock);
goto abort_attempt;
}
diff --git a/fs/afs/mntpt.c b/fs/afs/mntpt.c
index c52be53..5ffb570 100644
--- a/fs/afs/mntpt.c
+++ b/fs/afs/mntpt.c
@@ -17,7 +17,6 @@
#include <linux/pagemap.h>
#include <linux/mount.h>
#include <linux/namei.h>
-#include <linux/mnt_namespace.h>
#include "internal.h"
diff --git a/fs/afs/super.c b/fs/afs/super.c
index ad0514d..e1ea1c2 100644
--- a/fs/afs/super.c
+++ b/fs/afs/super.c
@@ -18,6 +18,7 @@
#include <linux/module.h>
#include <linux/init.h>
#include <linux/slab.h>
+#include <linux/smp_lock.h>
#include <linux/fs.h>
#include <linux/pagemap.h>
#include <linux/parser.h>
diff --git a/fs/aio.c b/fs/aio.c
index 76da125..d065b2c 100644
--- a/fs/aio.c
+++ b/fs/aio.c
@@ -485,6 +485,8 @@
{
assert_spin_locked(&ctx->ctx_lock);
+ if (req->ki_eventfd != NULL)
+ eventfd_ctx_put(req->ki_eventfd);
if (req->ki_dtor)
req->ki_dtor(req);
if (req->ki_iovec != &req->ki_inline_vec)
@@ -509,8 +511,6 @@
/* Complete the fput(s) */
if (req->ki_filp != NULL)
__fput(req->ki_filp);
- if (req->ki_eventfd != NULL)
- __fput(req->ki_eventfd);
/* Link the iocb into the context's free list */
spin_lock_irq(&ctx->ctx_lock);
@@ -528,8 +528,6 @@
*/
static int __aio_put_req(struct kioctx *ctx, struct kiocb *req)
{
- int schedule_putreq = 0;
-
dprintk(KERN_DEBUG "aio_put(%p): f_count=%ld\n",
req, atomic_long_read(&req->ki_filp->f_count));
@@ -549,24 +547,16 @@
* we would not be holding the last reference to the file*, so
* this function will be executed w/out any aio kthread wakeup.
*/
- if (unlikely(atomic_long_dec_and_test(&req->ki_filp->f_count)))
- schedule_putreq++;
- else
- req->ki_filp = NULL;
- if (req->ki_eventfd != NULL) {
- if (unlikely(atomic_long_dec_and_test(&req->ki_eventfd->f_count)))
- schedule_putreq++;
- else
- req->ki_eventfd = NULL;
- }
- if (unlikely(schedule_putreq)) {
+ if (unlikely(atomic_long_dec_and_test(&req->ki_filp->f_count))) {
get_ioctx(ctx);
spin_lock(&fput_lock);
list_add(&req->ki_list, &fput_head);
spin_unlock(&fput_lock);
queue_work(aio_wq, &fput_work);
- } else
+ } else {
+ req->ki_filp = NULL;
really_put_req(ctx, req);
+ }
return 1;
}
@@ -1622,7 +1612,7 @@
* an eventfd() fd, and will be signaled for each completed
* event using the eventfd_signal() function.
*/
- req->ki_eventfd = eventfd_fget((int) iocb->aio_resfd);
+ req->ki_eventfd = eventfd_ctx_fdget((int) iocb->aio_resfd);
if (IS_ERR(req->ki_eventfd)) {
ret = PTR_ERR(req->ki_eventfd);
req->ki_eventfd = NULL;
diff --git a/fs/autofs4/dev-ioctl.c b/fs/autofs4/dev-ioctl.c
index f3da2eb..00bf8fc 100644
--- a/fs/autofs4/dev-ioctl.c
+++ b/fs/autofs4/dev-ioctl.c
@@ -19,7 +19,6 @@
#include <linux/sched.h>
#include <linux/compat.h>
#include <linux/syscalls.h>
-#include <linux/smp_lock.h>
#include <linux/magic.h>
#include <linux/dcache.h>
#include <linux/uaccess.h>
diff --git a/fs/bfs/dir.c b/fs/bfs/dir.c
index 54bd07d..1e41aad 100644
--- a/fs/bfs/dir.c
+++ b/fs/bfs/dir.c
@@ -8,7 +8,6 @@
#include <linux/time.h>
#include <linux/string.h>
#include <linux/fs.h>
-#include <linux/smp_lock.h>
#include <linux/buffer_head.h>
#include <linux/sched.h>
#include "bfs.h"
diff --git a/fs/bfs/file.c b/fs/bfs/file.c
index 6a02126..88b9a3f 100644
--- a/fs/bfs/file.c
+++ b/fs/bfs/file.c
@@ -11,7 +11,6 @@
#include <linux/fs.h>
#include <linux/buffer_head.h>
-#include <linux/smp_lock.h>
#include "bfs.h"
#undef DEBUG
diff --git a/fs/binfmt_elf.c b/fs/binfmt_elf.c
index 9fa212b0..b7c1603 100644
--- a/fs/binfmt_elf.c
+++ b/fs/binfmt_elf.c
@@ -1522,11 +1522,11 @@
info->thread = NULL;
psinfo = kmalloc(sizeof(*psinfo), GFP_KERNEL);
- fill_note(&info->psinfo, "CORE", NT_PRPSINFO, sizeof(*psinfo), psinfo);
-
if (psinfo == NULL)
return 0;
+ fill_note(&info->psinfo, "CORE", NT_PRPSINFO, sizeof(*psinfo), psinfo);
+
/*
* Figure out how many notes we're going to need for each thread.
*/
@@ -1929,7 +1929,10 @@
elf = kmalloc(sizeof(*elf), GFP_KERNEL);
if (!elf)
goto out;
-
+ /*
+ * The number of segs are recored into ELF header as 16bit value.
+ * Please check DEFAULT_MAX_MAP_COUNT definition when you modify here.
+ */
segs = current->mm->map_count;
#ifdef ELF_CORE_EXTRA_PHDRS
segs += ELF_CORE_EXTRA_PHDRS;
diff --git a/fs/bio-integrity.c b/fs/bio-integrity.c
index 31c46a2..49a34e7 100644
--- a/fs/bio-integrity.c
+++ b/fs/bio-integrity.c
@@ -1,7 +1,7 @@
/*
* bio-integrity.c - bio data integrity extensions
*
- * Copyright (C) 2007, 2008 Oracle Corporation
+ * Copyright (C) 2007, 2008, 2009 Oracle Corporation
* Written by: Martin K. Petersen <martin.petersen@oracle.com>
*
* This program is free software; you can redistribute it and/or
@@ -25,11 +25,94 @@
#include <linux/bio.h>
#include <linux/workqueue.h>
-static struct kmem_cache *bio_integrity_slab __read_mostly;
-static mempool_t *bio_integrity_pool;
-static struct bio_set *integrity_bio_set;
+struct integrity_slab {
+ struct kmem_cache *slab;
+ unsigned short nr_vecs;
+ char name[8];
+};
+
+#define IS(x) { .nr_vecs = x, .name = "bip-"__stringify(x) }
+struct integrity_slab bip_slab[BIOVEC_NR_POOLS] __read_mostly = {
+ IS(1), IS(4), IS(16), IS(64), IS(128), IS(BIO_MAX_PAGES),
+};
+#undef IS
+
static struct workqueue_struct *kintegrityd_wq;
+static inline unsigned int vecs_to_idx(unsigned int nr)
+{
+ switch (nr) {
+ case 1:
+ return 0;
+ case 2 ... 4:
+ return 1;
+ case 5 ... 16:
+ return 2;
+ case 17 ... 64:
+ return 3;
+ case 65 ... 128:
+ return 4;
+ case 129 ... BIO_MAX_PAGES:
+ return 5;
+ default:
+ BUG();
+ }
+}
+
+static inline int use_bip_pool(unsigned int idx)
+{
+ if (idx == BIOVEC_NR_POOLS)
+ return 1;
+
+ return 0;
+}
+
+/**
+ * bio_integrity_alloc_bioset - Allocate integrity payload and attach it to bio
+ * @bio: bio to attach integrity metadata to
+ * @gfp_mask: Memory allocation mask
+ * @nr_vecs: Number of integrity metadata scatter-gather elements
+ * @bs: bio_set to allocate from
+ *
+ * Description: This function prepares a bio for attaching integrity
+ * metadata. nr_vecs specifies the maximum number of pages containing
+ * integrity metadata that can be attached.
+ */
+struct bio_integrity_payload *bio_integrity_alloc_bioset(struct bio *bio,
+ gfp_t gfp_mask,
+ unsigned int nr_vecs,
+ struct bio_set *bs)
+{
+ struct bio_integrity_payload *bip;
+ unsigned int idx = vecs_to_idx(nr_vecs);
+
+ BUG_ON(bio == NULL);
+ bip = NULL;
+
+ /* Lower order allocations come straight from slab */
+ if (!use_bip_pool(idx))
+ bip = kmem_cache_alloc(bip_slab[idx].slab, gfp_mask);
+
+ /* Use mempool if lower order alloc failed or max vecs were requested */
+ if (bip == NULL) {
+ bip = mempool_alloc(bs->bio_integrity_pool, gfp_mask);
+
+ if (unlikely(bip == NULL)) {
+ printk(KERN_ERR "%s: could not alloc bip\n", __func__);
+ return NULL;
+ }
+ }
+
+ memset(bip, 0, sizeof(*bip));
+
+ bip->bip_slab = idx;
+ bip->bip_bio = bio;
+ bio->bi_integrity = bip;
+
+ return bip;
+}
+EXPORT_SYMBOL(bio_integrity_alloc_bioset);
+
/**
* bio_integrity_alloc - Allocate integrity payload and attach it to bio
* @bio: bio to attach integrity metadata to
@@ -44,44 +127,19 @@
gfp_t gfp_mask,
unsigned int nr_vecs)
{
- struct bio_integrity_payload *bip;
- struct bio_vec *iv;
- unsigned long idx;
-
- BUG_ON(bio == NULL);
-
- bip = mempool_alloc(bio_integrity_pool, gfp_mask);
- if (unlikely(bip == NULL)) {
- printk(KERN_ERR "%s: could not alloc bip\n", __func__);
- return NULL;
- }
-
- memset(bip, 0, sizeof(*bip));
-
- iv = bvec_alloc_bs(gfp_mask, nr_vecs, &idx, integrity_bio_set);
- if (unlikely(iv == NULL)) {
- printk(KERN_ERR "%s: could not alloc bip_vec\n", __func__);
- mempool_free(bip, bio_integrity_pool);
- return NULL;
- }
-
- bip->bip_pool = idx;
- bip->bip_vec = iv;
- bip->bip_bio = bio;
- bio->bi_integrity = bip;
-
- return bip;
+ return bio_integrity_alloc_bioset(bio, gfp_mask, nr_vecs, fs_bio_set);
}
EXPORT_SYMBOL(bio_integrity_alloc);
/**
* bio_integrity_free - Free bio integrity payload
* @bio: bio containing bip to be freed
+ * @bs: bio_set this bio was allocated from
*
* Description: Used to free the integrity portion of a bio. Usually
* called from bio_free().
*/
-void bio_integrity_free(struct bio *bio)
+void bio_integrity_free(struct bio *bio, struct bio_set *bs)
{
struct bio_integrity_payload *bip = bio->bi_integrity;
@@ -92,8 +150,10 @@
&& bip->bip_buf != NULL)
kfree(bip->bip_buf);
- bvec_free_bs(integrity_bio_set, bip->bip_vec, bip->bip_pool);
- mempool_free(bip, bio_integrity_pool);
+ if (use_bip_pool(bip->bip_slab))
+ mempool_free(bip, bs->bio_integrity_pool);
+ else
+ kmem_cache_free(bip_slab[bip->bip_slab].slab, bip);
bio->bi_integrity = NULL;
}
@@ -114,7 +174,7 @@
struct bio_integrity_payload *bip = bio->bi_integrity;
struct bio_vec *iv;
- if (bip->bip_vcnt >= bvec_nr_vecs(bip->bip_pool)) {
+ if (bip->bip_vcnt >= bvec_nr_vecs(bip->bip_slab)) {
printk(KERN_ERR "%s: bip_vec full\n", __func__);
return 0;
}
@@ -647,8 +707,8 @@
bp->iv1 = bip->bip_vec[0];
bp->iv2 = bip->bip_vec[0];
- bp->bip1.bip_vec = &bp->iv1;
- bp->bip2.bip_vec = &bp->iv2;
+ bp->bip1.bip_vec[0] = bp->iv1;
+ bp->bip2.bip_vec[0] = bp->iv2;
bp->iv1.bv_len = sectors * bi->tuple_size;
bp->iv2.bv_offset += sectors * bi->tuple_size;
@@ -667,17 +727,19 @@
* @bio: New bio
* @bio_src: Original bio
* @gfp_mask: Memory allocation mask
+ * @bs: bio_set to allocate bip from
*
* Description: Called to allocate a bip when cloning a bio
*/
-int bio_integrity_clone(struct bio *bio, struct bio *bio_src, gfp_t gfp_mask)
+int bio_integrity_clone(struct bio *bio, struct bio *bio_src,
+ gfp_t gfp_mask, struct bio_set *bs)
{
struct bio_integrity_payload *bip_src = bio_src->bi_integrity;
struct bio_integrity_payload *bip;
BUG_ON(bip_src == NULL);
- bip = bio_integrity_alloc(bio, gfp_mask, bip_src->bip_vcnt);
+ bip = bio_integrity_alloc_bioset(bio, gfp_mask, bip_src->bip_vcnt, bs);
if (bip == NULL)
return -EIO;
@@ -693,25 +755,43 @@
}
EXPORT_SYMBOL(bio_integrity_clone);
-static int __init bio_integrity_init(void)
+int bioset_integrity_create(struct bio_set *bs, int pool_size)
{
- kintegrityd_wq = create_workqueue("kintegrityd");
+ unsigned int max_slab = vecs_to_idx(BIO_MAX_PAGES);
- if (!kintegrityd_wq)
- panic("Failed to create kintegrityd\n");
+ bs->bio_integrity_pool =
+ mempool_create_slab_pool(pool_size, bip_slab[max_slab].slab);
- bio_integrity_slab = KMEM_CACHE(bio_integrity_payload,
- SLAB_HWCACHE_ALIGN|SLAB_PANIC);
-
- bio_integrity_pool = mempool_create_slab_pool(BIO_POOL_SIZE,
- bio_integrity_slab);
- if (!bio_integrity_pool)
- panic("bio_integrity: can't allocate bip pool\n");
-
- integrity_bio_set = bioset_create(BIO_POOL_SIZE, 0);
- if (!integrity_bio_set)
- panic("bio_integrity: can't allocate bio_set\n");
+ if (!bs->bio_integrity_pool)
+ return -1;
return 0;
}
-subsys_initcall(bio_integrity_init);
+EXPORT_SYMBOL(bioset_integrity_create);
+
+void bioset_integrity_free(struct bio_set *bs)
+{
+ if (bs->bio_integrity_pool)
+ mempool_destroy(bs->bio_integrity_pool);
+}
+EXPORT_SYMBOL(bioset_integrity_free);
+
+void __init bio_integrity_init(void)
+{
+ unsigned int i;
+
+ kintegrityd_wq = create_workqueue("kintegrityd");
+ if (!kintegrityd_wq)
+ panic("Failed to create kintegrityd\n");
+
+ for (i = 0 ; i < BIOVEC_NR_POOLS ; i++) {
+ unsigned int size;
+
+ size = sizeof(struct bio_integrity_payload)
+ + bip_slab[i].nr_vecs * sizeof(struct bio_vec);
+
+ bip_slab[i].slab =
+ kmem_cache_create(bip_slab[i].name, size, 0,
+ SLAB_HWCACHE_ALIGN|SLAB_PANIC, NULL);
+ }
+}
diff --git a/fs/bio.c b/fs/bio.c
index 24c9140..7673800 100644
--- a/fs/bio.c
+++ b/fs/bio.c
@@ -238,7 +238,7 @@
bvec_free_bs(bs, bio->bi_io_vec, BIO_POOL_IDX(bio));
if (bio_integrity(bio))
- bio_integrity_free(bio);
+ bio_integrity_free(bio, bs);
/*
* If we have front padding, adjust the bio pointer before freeing
@@ -341,7 +341,7 @@
static void bio_kmalloc_destructor(struct bio *bio)
{
if (bio_integrity(bio))
- bio_integrity_free(bio);
+ bio_integrity_free(bio, fs_bio_set);
kfree(bio);
}
@@ -472,7 +472,7 @@
if (bio_integrity(bio)) {
int ret;
- ret = bio_integrity_clone(b, bio, gfp_mask);
+ ret = bio_integrity_clone(b, bio, gfp_mask, fs_bio_set);
if (ret < 0) {
bio_put(b);
@@ -705,14 +705,13 @@
}
static int __bio_copy_iov(struct bio *bio, struct bio_vec *iovecs,
- struct sg_iovec *iov, int iov_count, int uncopy,
- int do_free_page)
+ struct sg_iovec *iov, int iov_count,
+ int to_user, int from_user, int do_free_page)
{
int ret = 0, i;
struct bio_vec *bvec;
int iov_idx = 0;
unsigned int iov_off = 0;
- int read = bio_data_dir(bio) == READ;
__bio_for_each_segment(bvec, bio, i, 0) {
char *bv_addr = page_address(bvec->bv_page);
@@ -727,13 +726,14 @@
iov_addr = iov[iov_idx].iov_base + iov_off;
if (!ret) {
- if (!read && !uncopy)
- ret = copy_from_user(bv_addr, iov_addr,
- bytes);
- if (read && uncopy)
+ if (to_user)
ret = copy_to_user(iov_addr, bv_addr,
bytes);
+ if (from_user)
+ ret = copy_from_user(bv_addr, iov_addr,
+ bytes);
+
if (ret)
ret = -EFAULT;
}
@@ -770,7 +770,8 @@
if (!bio_flagged(bio, BIO_NULL_MAPPED))
ret = __bio_copy_iov(bio, bmd->iovecs, bmd->sgvecs,
- bmd->nr_sgvecs, 1, bmd->is_our_pages);
+ bmd->nr_sgvecs, bio_data_dir(bio) == READ,
+ 0, bmd->is_our_pages);
bio_free_map_data(bmd);
bio_put(bio);
return ret;
@@ -875,8 +876,9 @@
/*
* success
*/
- if (!write_to_vm && (!map_data || !map_data->null_mapped)) {
- ret = __bio_copy_iov(bio, bio->bi_io_vec, iov, iov_count, 0, 0);
+ if ((!write_to_vm && (!map_data || !map_data->null_mapped)) ||
+ (map_data && map_data->from_user)) {
+ ret = __bio_copy_iov(bio, bio->bi_io_vec, iov, iov_count, 0, 1, 0);
if (ret)
goto cleanup;
}
@@ -1539,6 +1541,7 @@
if (bs->bio_pool)
mempool_destroy(bs->bio_pool);
+ bioset_integrity_free(bs);
biovec_free_pools(bs);
bio_put_slab(bs);
@@ -1579,6 +1582,9 @@
if (!bs->bio_pool)
goto bad;
+ if (bioset_integrity_create(bs, pool_size))
+ goto bad;
+
if (!biovec_create_pools(bs, pool_size))
return bs;
@@ -1616,6 +1622,7 @@
if (!bio_slabs)
panic("bio: can't allocate bios\n");
+ bio_integrity_init();
biovec_init_slabs();
fs_bio_set = bioset_create(BIO_POOL_SIZE, 0);
diff --git a/fs/btrfs/async-thread.c b/fs/btrfs/async-thread.c
index 7f88628..6e4f6c5 100644
--- a/fs/btrfs/async-thread.c
+++ b/fs/btrfs/async-thread.c
@@ -299,8 +299,8 @@
"btrfs-%s-%d", workers->name,
workers->num_workers + i);
if (IS_ERR(worker->task)) {
- kfree(worker);
ret = PTR_ERR(worker->task);
+ kfree(worker);
goto fail;
}
diff --git a/fs/btrfs/compression.c b/fs/btrfs/compression.c
index de1e2fd..9d8ba4d 100644
--- a/fs/btrfs/compression.c
+++ b/fs/btrfs/compression.c
@@ -26,7 +26,6 @@
#include <linux/time.h>
#include <linux/init.h>
#include <linux/string.h>
-#include <linux/smp_lock.h>
#include <linux/backing-dev.h>
#include <linux/mpage.h>
#include <linux/swap.h>
diff --git a/fs/btrfs/ctree.h b/fs/btrfs/ctree.h
index 2779c2f..98a8738 100644
--- a/fs/btrfs/ctree.h
+++ b/fs/btrfs/ctree.h
@@ -2074,8 +2074,7 @@
int btrfs_next_leaf(struct btrfs_root *root, struct btrfs_path *path);
int btrfs_prev_leaf(struct btrfs_root *root, struct btrfs_path *path);
int btrfs_leaf_free_space(struct btrfs_root *root, struct extent_buffer *leaf);
-int btrfs_drop_snapshot(struct btrfs_trans_handle *trans, struct btrfs_root
- *root);
+int btrfs_drop_snapshot(struct btrfs_root *root, int update_ref);
int btrfs_drop_subtree(struct btrfs_trans_handle *trans,
struct btrfs_root *root,
struct extent_buffer *node,
diff --git a/fs/btrfs/extent-tree.c b/fs/btrfs/extent-tree.c
index edc7d20..a5aca39 100644
--- a/fs/btrfs/extent-tree.c
+++ b/fs/btrfs/extent-tree.c
@@ -990,15 +990,13 @@
return type;
}
-static int find_next_key(struct btrfs_path *path, struct btrfs_key *key)
+static int find_next_key(struct btrfs_path *path, int level,
+ struct btrfs_key *key)
{
- int level;
- BUG_ON(!path->keep_locks);
- for (level = 0; level < BTRFS_MAX_LEVEL; level++) {
+ for (; level < BTRFS_MAX_LEVEL; level++) {
if (!path->nodes[level])
break;
- btrfs_assert_tree_locked(path->nodes[level]);
if (path->slots[level] + 1 >=
btrfs_header_nritems(path->nodes[level]))
continue;
@@ -1158,7 +1156,8 @@
* For simplicity, we just do not add new inline back
* ref if there is any kind of item for this block
*/
- if (find_next_key(path, &key) == 0 && key.objectid == bytenr &&
+ if (find_next_key(path, 0, &key) == 0 &&
+ key.objectid == bytenr &&
key.type < BTRFS_BLOCK_GROUP_ITEM_KEY) {
err = -EAGAIN;
goto out;
@@ -2697,7 +2696,7 @@
printk(KERN_ERR "no space left, need %llu, %llu delalloc bytes"
", %llu bytes_used, %llu bytes_reserved, "
- "%llu bytes_pinned, %llu bytes_readonly, %llu may use"
+ "%llu bytes_pinned, %llu bytes_readonly, %llu may use "
"%llu total\n", (unsigned long long)bytes,
(unsigned long long)data_sinfo->bytes_delalloc,
(unsigned long long)data_sinfo->bytes_used,
@@ -4128,6 +4127,7 @@
return buf;
}
+#if 0
int btrfs_drop_leaf_ref(struct btrfs_trans_handle *trans,
struct btrfs_root *root, struct extent_buffer *leaf)
{
@@ -4171,8 +4171,6 @@
return 0;
}
-#if 0
-
static noinline int cache_drop_leaf_ref(struct btrfs_trans_handle *trans,
struct btrfs_root *root,
struct btrfs_leaf_ref *ref)
@@ -4553,262 +4551,471 @@
}
#endif
+struct walk_control {
+ u64 refs[BTRFS_MAX_LEVEL];
+ u64 flags[BTRFS_MAX_LEVEL];
+ struct btrfs_key update_progress;
+ int stage;
+ int level;
+ int shared_level;
+ int update_ref;
+ int keep_locks;
+};
+
+#define DROP_REFERENCE 1
+#define UPDATE_BACKREF 2
+
/*
- * helper function for drop_subtree, this function is similar to
- * walk_down_tree. The main difference is that it checks reference
- * counts while tree blocks are locked.
+ * hepler to process tree block while walking down the tree.
+ *
+ * when wc->stage == DROP_REFERENCE, this function checks
+ * reference count of the block. if the block is shared and
+ * we need update back refs for the subtree rooted at the
+ * block, this function changes wc->stage to UPDATE_BACKREF
+ *
+ * when wc->stage == UPDATE_BACKREF, this function updates
+ * back refs for pointers in the block.
+ *
+ * NOTE: return value 1 means we should stop walking down.
*/
+static noinline int walk_down_proc(struct btrfs_trans_handle *trans,
+ struct btrfs_root *root,
+ struct btrfs_path *path,
+ struct walk_control *wc)
+{
+ int level = wc->level;
+ struct extent_buffer *eb = path->nodes[level];
+ struct btrfs_key key;
+ u64 flag = BTRFS_BLOCK_FLAG_FULL_BACKREF;
+ int ret;
+
+ if (wc->stage == UPDATE_BACKREF &&
+ btrfs_header_owner(eb) != root->root_key.objectid)
+ return 1;
+
+ /*
+ * when reference count of tree block is 1, it won't increase
+ * again. once full backref flag is set, we never clear it.
+ */
+ if ((wc->stage == DROP_REFERENCE && wc->refs[level] != 1) ||
+ (wc->stage == UPDATE_BACKREF && !(wc->flags[level] & flag))) {
+ BUG_ON(!path->locks[level]);
+ ret = btrfs_lookup_extent_info(trans, root,
+ eb->start, eb->len,
+ &wc->refs[level],
+ &wc->flags[level]);
+ BUG_ON(ret);
+ BUG_ON(wc->refs[level] == 0);
+ }
+
+ if (wc->stage == DROP_REFERENCE &&
+ wc->update_ref && wc->refs[level] > 1) {
+ BUG_ON(eb == root->node);
+ BUG_ON(path->slots[level] > 0);
+ if (level == 0)
+ btrfs_item_key_to_cpu(eb, &key, path->slots[level]);
+ else
+ btrfs_node_key_to_cpu(eb, &key, path->slots[level]);
+ if (btrfs_header_owner(eb) == root->root_key.objectid &&
+ btrfs_comp_cpu_keys(&key, &wc->update_progress) >= 0) {
+ wc->stage = UPDATE_BACKREF;
+ wc->shared_level = level;
+ }
+ }
+
+ if (wc->stage == DROP_REFERENCE) {
+ if (wc->refs[level] > 1)
+ return 1;
+
+ if (path->locks[level] && !wc->keep_locks) {
+ btrfs_tree_unlock(eb);
+ path->locks[level] = 0;
+ }
+ return 0;
+ }
+
+ /* wc->stage == UPDATE_BACKREF */
+ if (!(wc->flags[level] & flag)) {
+ BUG_ON(!path->locks[level]);
+ ret = btrfs_inc_ref(trans, root, eb, 1);
+ BUG_ON(ret);
+ ret = btrfs_dec_ref(trans, root, eb, 0);
+ BUG_ON(ret);
+ ret = btrfs_set_disk_extent_flags(trans, root, eb->start,
+ eb->len, flag, 0);
+ BUG_ON(ret);
+ wc->flags[level] |= flag;
+ }
+
+ /*
+ * the block is shared by multiple trees, so it's not good to
+ * keep the tree lock
+ */
+ if (path->locks[level] && level > 0) {
+ btrfs_tree_unlock(eb);
+ path->locks[level] = 0;
+ }
+ return 0;
+}
+
+/*
+ * hepler to process tree block while walking up the tree.
+ *
+ * when wc->stage == DROP_REFERENCE, this function drops
+ * reference count on the block.
+ *
+ * when wc->stage == UPDATE_BACKREF, this function changes
+ * wc->stage back to DROP_REFERENCE if we changed wc->stage
+ * to UPDATE_BACKREF previously while processing the block.
+ *
+ * NOTE: return value 1 means we should stop walking up.
+ */
+static noinline int walk_up_proc(struct btrfs_trans_handle *trans,
+ struct btrfs_root *root,
+ struct btrfs_path *path,
+ struct walk_control *wc)
+{
+ int ret = 0;
+ int level = wc->level;
+ struct extent_buffer *eb = path->nodes[level];
+ u64 parent = 0;
+
+ if (wc->stage == UPDATE_BACKREF) {
+ BUG_ON(wc->shared_level < level);
+ if (level < wc->shared_level)
+ goto out;
+
+ BUG_ON(wc->refs[level] <= 1);
+ ret = find_next_key(path, level + 1, &wc->update_progress);
+ if (ret > 0)
+ wc->update_ref = 0;
+
+ wc->stage = DROP_REFERENCE;
+ wc->shared_level = -1;
+ path->slots[level] = 0;
+
+ /*
+ * check reference count again if the block isn't locked.
+ * we should start walking down the tree again if reference
+ * count is one.
+ */
+ if (!path->locks[level]) {
+ BUG_ON(level == 0);
+ btrfs_tree_lock(eb);
+ btrfs_set_lock_blocking(eb);
+ path->locks[level] = 1;
+
+ ret = btrfs_lookup_extent_info(trans, root,
+ eb->start, eb->len,
+ &wc->refs[level],
+ &wc->flags[level]);
+ BUG_ON(ret);
+ BUG_ON(wc->refs[level] == 0);
+ if (wc->refs[level] == 1) {
+ btrfs_tree_unlock(eb);
+ path->locks[level] = 0;
+ return 1;
+ }
+ } else {
+ BUG_ON(level != 0);
+ }
+ }
+
+ /* wc->stage == DROP_REFERENCE */
+ BUG_ON(wc->refs[level] > 1 && !path->locks[level]);
+
+ if (wc->refs[level] == 1) {
+ if (level == 0) {
+ if (wc->flags[level] & BTRFS_BLOCK_FLAG_FULL_BACKREF)
+ ret = btrfs_dec_ref(trans, root, eb, 1);
+ else
+ ret = btrfs_dec_ref(trans, root, eb, 0);
+ BUG_ON(ret);
+ }
+ /* make block locked assertion in clean_tree_block happy */
+ if (!path->locks[level] &&
+ btrfs_header_generation(eb) == trans->transid) {
+ btrfs_tree_lock(eb);
+ btrfs_set_lock_blocking(eb);
+ path->locks[level] = 1;
+ }
+ clean_tree_block(trans, root, eb);
+ }
+
+ if (eb == root->node) {
+ if (wc->flags[level] & BTRFS_BLOCK_FLAG_FULL_BACKREF)
+ parent = eb->start;
+ else
+ BUG_ON(root->root_key.objectid !=
+ btrfs_header_owner(eb));
+ } else {
+ if (wc->flags[level + 1] & BTRFS_BLOCK_FLAG_FULL_BACKREF)
+ parent = path->nodes[level + 1]->start;
+ else
+ BUG_ON(root->root_key.objectid !=
+ btrfs_header_owner(path->nodes[level + 1]));
+ }
+
+ ret = btrfs_free_extent(trans, root, eb->start, eb->len, parent,
+ root->root_key.objectid, level, 0);
+ BUG_ON(ret);
+out:
+ wc->refs[level] = 0;
+ wc->flags[level] = 0;
+ return ret;
+}
+
static noinline int walk_down_tree(struct btrfs_trans_handle *trans,
struct btrfs_root *root,
- struct btrfs_path *path, int *level)
+ struct btrfs_path *path,
+ struct walk_control *wc)
{
struct extent_buffer *next;
struct extent_buffer *cur;
- struct extent_buffer *parent;
u64 bytenr;
u64 ptr_gen;
- u64 refs;
- u64 flags;
u32 blocksize;
+ int level = wc->level;
int ret;
- cur = path->nodes[*level];
- ret = btrfs_lookup_extent_info(trans, root, cur->start, cur->len,
- &refs, &flags);
- BUG_ON(ret);
- if (refs > 1)
- goto out;
+ while (level >= 0) {
+ cur = path->nodes[level];
+ BUG_ON(path->slots[level] >= btrfs_header_nritems(cur));
- BUG_ON(!(flags & BTRFS_BLOCK_FLAG_FULL_BACKREF));
-
- while (*level >= 0) {
- cur = path->nodes[*level];
- if (*level == 0) {
- ret = btrfs_drop_leaf_ref(trans, root, cur);
- BUG_ON(ret);
- clean_tree_block(trans, root, cur);
+ ret = walk_down_proc(trans, root, path, wc);
+ if (ret > 0)
break;
- }
- if (path->slots[*level] >= btrfs_header_nritems(cur)) {
- clean_tree_block(trans, root, cur);
- break;
- }
- bytenr = btrfs_node_blockptr(cur, path->slots[*level]);
- blocksize = btrfs_level_size(root, *level - 1);
- ptr_gen = btrfs_node_ptr_generation(cur, path->slots[*level]);
+ if (level == 0)
+ break;
+
+ bytenr = btrfs_node_blockptr(cur, path->slots[level]);
+ blocksize = btrfs_level_size(root, level - 1);
+ ptr_gen = btrfs_node_ptr_generation(cur, path->slots[level]);
next = read_tree_block(root, bytenr, blocksize, ptr_gen);
btrfs_tree_lock(next);
btrfs_set_lock_blocking(next);
- ret = btrfs_lookup_extent_info(trans, root, bytenr, blocksize,
- &refs, &flags);
- BUG_ON(ret);
- if (refs > 1) {
- parent = path->nodes[*level];
- ret = btrfs_free_extent(trans, root, bytenr,
- blocksize, parent->start,
- btrfs_header_owner(parent),
- *level - 1, 0);
- BUG_ON(ret);
- path->slots[*level]++;
- btrfs_tree_unlock(next);
- free_extent_buffer(next);
- continue;
- }
-
- BUG_ON(!(flags & BTRFS_BLOCK_FLAG_FULL_BACKREF));
-
- *level = btrfs_header_level(next);
- path->nodes[*level] = next;
- path->slots[*level] = 0;
- path->locks[*level] = 1;
- cond_resched();
+ level--;
+ BUG_ON(level != btrfs_header_level(next));
+ path->nodes[level] = next;
+ path->slots[level] = 0;
+ path->locks[level] = 1;
+ wc->level = level;
}
-out:
- if (path->nodes[*level] == root->node)
- parent = path->nodes[*level];
- else
- parent = path->nodes[*level + 1];
- bytenr = path->nodes[*level]->start;
- blocksize = path->nodes[*level]->len;
-
- ret = btrfs_free_extent(trans, root, bytenr, blocksize, parent->start,
- btrfs_header_owner(parent), *level, 0);
- BUG_ON(ret);
-
- if (path->locks[*level]) {
- btrfs_tree_unlock(path->nodes[*level]);
- path->locks[*level] = 0;
- }
- free_extent_buffer(path->nodes[*level]);
- path->nodes[*level] = NULL;
- *level += 1;
- cond_resched();
return 0;
}
-/*
- * helper for dropping snapshots. This walks back up the tree in the path
- * to find the first node higher up where we haven't yet gone through
- * all the slots
- */
static noinline int walk_up_tree(struct btrfs_trans_handle *trans,
struct btrfs_root *root,
struct btrfs_path *path,
- int *level, int max_level)
+ struct walk_control *wc, int max_level)
{
- struct btrfs_root_item *root_item = &root->root_item;
- int i;
- int slot;
+ int level = wc->level;
int ret;
- for (i = *level; i < max_level && path->nodes[i]; i++) {
- slot = path->slots[i];
- if (slot + 1 < btrfs_header_nritems(path->nodes[i])) {
- /*
- * there is more work to do in this level.
- * Update the drop_progress marker to reflect
- * the work we've done so far, and then bump
- * the slot number
- */
- path->slots[i]++;
- WARN_ON(*level == 0);
- if (max_level == BTRFS_MAX_LEVEL) {
- btrfs_node_key(path->nodes[i],
- &root_item->drop_progress,
- path->slots[i]);
- root_item->drop_level = i;
- }
- *level = i;
+ path->slots[level] = btrfs_header_nritems(path->nodes[level]);
+ while (level < max_level && path->nodes[level]) {
+ wc->level = level;
+ if (path->slots[level] + 1 <
+ btrfs_header_nritems(path->nodes[level])) {
+ path->slots[level]++;
return 0;
} else {
- struct extent_buffer *parent;
+ ret = walk_up_proc(trans, root, path, wc);
+ if (ret > 0)
+ return 0;
- /*
- * this whole node is done, free our reference
- * on it and go up one level
- */
- if (path->nodes[*level] == root->node)
- parent = path->nodes[*level];
- else
- parent = path->nodes[*level + 1];
-
- clean_tree_block(trans, root, path->nodes[i]);
- ret = btrfs_free_extent(trans, root,
- path->nodes[i]->start,
- path->nodes[i]->len,
- parent->start,
- btrfs_header_owner(parent),
- *level, 0);
- BUG_ON(ret);
- if (path->locks[*level]) {
- btrfs_tree_unlock(path->nodes[i]);
- path->locks[i] = 0;
+ if (path->locks[level]) {
+ btrfs_tree_unlock(path->nodes[level]);
+ path->locks[level] = 0;
}
- free_extent_buffer(path->nodes[i]);
- path->nodes[i] = NULL;
- *level = i + 1;
+ free_extent_buffer(path->nodes[level]);
+ path->nodes[level] = NULL;
+ level++;
}
}
return 1;
}
/*
- * drop the reference count on the tree rooted at 'snap'. This traverses
- * the tree freeing any blocks that have a ref count of zero after being
- * decremented.
+ * drop a subvolume tree.
+ *
+ * this function traverses the tree freeing any blocks that only
+ * referenced by the tree.
+ *
+ * when a shared tree block is found. this function decreases its
+ * reference count by one. if update_ref is true, this function
+ * also make sure backrefs for the shared block and all lower level
+ * blocks are properly updated.
*/
-int btrfs_drop_snapshot(struct btrfs_trans_handle *trans, struct btrfs_root
- *root)
+int btrfs_drop_snapshot(struct btrfs_root *root, int update_ref)
{
- int ret = 0;
- int wret;
- int level;
struct btrfs_path *path;
- int update_count;
+ struct btrfs_trans_handle *trans;
+ struct btrfs_root *tree_root = root->fs_info->tree_root;
struct btrfs_root_item *root_item = &root->root_item;
+ struct walk_control *wc;
+ struct btrfs_key key;
+ int err = 0;
+ int ret;
+ int level;
path = btrfs_alloc_path();
BUG_ON(!path);
- level = btrfs_header_level(root->node);
+ wc = kzalloc(sizeof(*wc), GFP_NOFS);
+ BUG_ON(!wc);
+
+ trans = btrfs_start_transaction(tree_root, 1);
+
if (btrfs_disk_key_objectid(&root_item->drop_progress) == 0) {
+ level = btrfs_header_level(root->node);
path->nodes[level] = btrfs_lock_root_node(root);
btrfs_set_lock_blocking(path->nodes[level]);
path->slots[level] = 0;
path->locks[level] = 1;
+ memset(&wc->update_progress, 0,
+ sizeof(wc->update_progress));
} else {
- struct btrfs_key key;
- struct btrfs_disk_key found_key;
- struct extent_buffer *node;
-
btrfs_disk_key_to_cpu(&key, &root_item->drop_progress);
+ memcpy(&wc->update_progress, &key,
+ sizeof(wc->update_progress));
+
level = root_item->drop_level;
+ BUG_ON(level == 0);
path->lowest_level = level;
- wret = btrfs_search_slot(NULL, root, &key, path, 0, 0);
- if (wret < 0) {
- ret = wret;
+ ret = btrfs_search_slot(NULL, root, &key, path, 0, 0);
+ path->lowest_level = 0;
+ if (ret < 0) {
+ err = ret;
goto out;
}
- node = path->nodes[level];
- btrfs_node_key(node, &found_key, path->slots[level]);
- WARN_ON(memcmp(&found_key, &root_item->drop_progress,
- sizeof(found_key)));
+ btrfs_node_key_to_cpu(path->nodes[level], &key,
+ path->slots[level]);
+ WARN_ON(memcmp(&key, &wc->update_progress, sizeof(key)));
+
/*
* unlock our path, this is safe because only this
* function is allowed to delete this snapshot
*/
btrfs_unlock_up_safe(path, 0);
- }
- while (1) {
- unsigned long update;
- wret = walk_down_tree(trans, root, path, &level);
- if (wret > 0)
- break;
- if (wret < 0)
- ret = wret;
- wret = walk_up_tree(trans, root, path, &level,
- BTRFS_MAX_LEVEL);
- if (wret > 0)
- break;
- if (wret < 0)
- ret = wret;
- if (trans->transaction->in_commit ||
- trans->transaction->delayed_refs.flushing) {
- ret = -EAGAIN;
+ level = btrfs_header_level(root->node);
+ while (1) {
+ btrfs_tree_lock(path->nodes[level]);
+ btrfs_set_lock_blocking(path->nodes[level]);
+
+ ret = btrfs_lookup_extent_info(trans, root,
+ path->nodes[level]->start,
+ path->nodes[level]->len,
+ &wc->refs[level],
+ &wc->flags[level]);
+ BUG_ON(ret);
+ BUG_ON(wc->refs[level] == 0);
+
+ if (level == root_item->drop_level)
+ break;
+
+ btrfs_tree_unlock(path->nodes[level]);
+ WARN_ON(wc->refs[level] != 1);
+ level--;
+ }
+ }
+
+ wc->level = level;
+ wc->shared_level = -1;
+ wc->stage = DROP_REFERENCE;
+ wc->update_ref = update_ref;
+ wc->keep_locks = 0;
+
+ while (1) {
+ ret = walk_down_tree(trans, root, path, wc);
+ if (ret < 0) {
+ err = ret;
break;
}
- for (update_count = 0; update_count < 16; update_count++) {
+
+ ret = walk_up_tree(trans, root, path, wc, BTRFS_MAX_LEVEL);
+ if (ret < 0) {
+ err = ret;
+ break;
+ }
+
+ if (ret > 0) {
+ BUG_ON(wc->stage != DROP_REFERENCE);
+ break;
+ }
+
+ if (wc->stage == DROP_REFERENCE) {
+ level = wc->level;
+ btrfs_node_key(path->nodes[level],
+ &root_item->drop_progress,
+ path->slots[level]);
+ root_item->drop_level = level;
+ }
+
+ BUG_ON(wc->level == 0);
+ if (trans->transaction->in_commit ||
+ trans->transaction->delayed_refs.flushing) {
+ ret = btrfs_update_root(trans, tree_root,
+ &root->root_key,
+ root_item);
+ BUG_ON(ret);
+
+ btrfs_end_transaction(trans, tree_root);
+ trans = btrfs_start_transaction(tree_root, 1);
+ } else {
+ unsigned long update;
update = trans->delayed_ref_updates;
trans->delayed_ref_updates = 0;
if (update)
- btrfs_run_delayed_refs(trans, root, update);
- else
- break;
+ btrfs_run_delayed_refs(trans, tree_root,
+ update);
}
}
+ btrfs_release_path(root, path);
+ BUG_ON(err);
+
+ ret = btrfs_del_root(trans, tree_root, &root->root_key);
+ BUG_ON(ret);
+
+ free_extent_buffer(root->node);
+ free_extent_buffer(root->commit_root);
+ kfree(root);
out:
+ btrfs_end_transaction(trans, tree_root);
+ kfree(wc);
btrfs_free_path(path);
- return ret;
+ return err;
}
+/*
+ * drop subtree rooted at tree block 'node'.
+ *
+ * NOTE: this function will unlock and release tree block 'node'
+ */
int btrfs_drop_subtree(struct btrfs_trans_handle *trans,
struct btrfs_root *root,
struct extent_buffer *node,
struct extent_buffer *parent)
{
struct btrfs_path *path;
+ struct walk_control *wc;
int level;
int parent_level;
int ret = 0;
int wret;
+ BUG_ON(root->root_key.objectid != BTRFS_TREE_RELOC_OBJECTID);
+
path = btrfs_alloc_path();
BUG_ON(!path);
+ wc = kzalloc(sizeof(*wc), GFP_NOFS);
+ BUG_ON(!wc);
+
btrfs_assert_tree_locked(parent);
parent_level = btrfs_header_level(parent);
extent_buffer_get(parent);
@@ -4817,24 +5024,33 @@
btrfs_assert_tree_locked(node);
level = btrfs_header_level(node);
- extent_buffer_get(node);
path->nodes[level] = node;
path->slots[level] = 0;
+ path->locks[level] = 1;
+
+ wc->refs[parent_level] = 1;
+ wc->flags[parent_level] = BTRFS_BLOCK_FLAG_FULL_BACKREF;
+ wc->level = level;
+ wc->shared_level = -1;
+ wc->stage = DROP_REFERENCE;
+ wc->update_ref = 0;
+ wc->keep_locks = 1;
while (1) {
- wret = walk_down_tree(trans, root, path, &level);
- if (wret < 0)
+ wret = walk_down_tree(trans, root, path, wc);
+ if (wret < 0) {
ret = wret;
- if (wret != 0)
break;
+ }
- wret = walk_up_tree(trans, root, path, &level, parent_level);
+ wret = walk_up_tree(trans, root, path, wc, parent_level);
if (wret < 0)
ret = wret;
if (wret != 0)
break;
}
+ kfree(wc);
btrfs_free_path(path);
return ret;
}
diff --git a/fs/btrfs/file.c b/fs/btrfs/file.c
index 126477e..4b83397 100644
--- a/fs/btrfs/file.c
+++ b/fs/btrfs/file.c
@@ -22,7 +22,6 @@
#include <linux/time.h>
#include <linux/init.h>
#include <linux/string.h>
-#include <linux/smp_lock.h>
#include <linux/backing-dev.h>
#include <linux/mpage.h>
#include <linux/swap.h>
@@ -151,7 +150,10 @@
}
if (end_pos > isize) {
i_size_write(inode, end_pos);
- btrfs_update_inode(trans, root, inode);
+ /* we've only changed i_size in ram, and we haven't updated
+ * the disk i_size. There is no need to log the inode
+ * at this time.
+ */
}
err = btrfs_end_transaction(trans, root);
out_unlock:
diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c
index dbe1aab..791eab1 100644
--- a/fs/btrfs/inode.c
+++ b/fs/btrfs/inode.c
@@ -26,7 +26,6 @@
#include <linux/time.h>
#include <linux/init.h>
#include <linux/string.h>
-#include <linux/smp_lock.h>
#include <linux/backing-dev.h>
#include <linux/mpage.h>
#include <linux/swap.h>
@@ -3580,12 +3579,6 @@
owner = 1;
BTRFS_I(inode)->block_group =
btrfs_find_block_group(root, 0, alloc_hint, owner);
- if ((mode & S_IFREG)) {
- if (btrfs_test_opt(root, NODATASUM))
- BTRFS_I(inode)->flags |= BTRFS_INODE_NODATASUM;
- if (btrfs_test_opt(root, NODATACOW))
- BTRFS_I(inode)->flags |= BTRFS_INODE_NODATACOW;
- }
key[0].objectid = objectid;
btrfs_set_key_type(&key[0], BTRFS_INODE_ITEM_KEY);
@@ -3640,6 +3633,13 @@
btrfs_inherit_iflags(inode, dir);
+ if ((mode & S_IFREG)) {
+ if (btrfs_test_opt(root, NODATASUM))
+ BTRFS_I(inode)->flags |= BTRFS_INODE_NODATASUM;
+ if (btrfs_test_opt(root, NODATACOW))
+ BTRFS_I(inode)->flags |= BTRFS_INODE_NODATACOW;
+ }
+
insert_inode_hash(inode);
inode_tree_add(inode);
return inode;
@@ -5082,6 +5082,7 @@
u64 mask = BTRFS_I(inode)->root->sectorsize - 1;
struct extent_map *em;
struct btrfs_trans_handle *trans;
+ struct btrfs_root *root;
int ret;
alloc_start = offset & ~mask;
@@ -5100,6 +5101,13 @@
goto out;
}
+ root = BTRFS_I(inode)->root;
+
+ ret = btrfs_check_data_free_space(root, inode,
+ alloc_end - alloc_start);
+ if (ret)
+ goto out;
+
locked_end = alloc_end - 1;
while (1) {
struct btrfs_ordered_extent *ordered;
@@ -5107,7 +5115,7 @@
trans = btrfs_start_transaction(BTRFS_I(inode)->root, 1);
if (!trans) {
ret = -EIO;
- goto out;
+ goto out_free;
}
/* the extent lock is ordered inside the running
@@ -5168,6 +5176,8 @@
GFP_NOFS);
btrfs_end_transaction(trans, BTRFS_I(inode)->root);
+out_free:
+ btrfs_free_reserved_data_space(root, inode, alloc_end - alloc_start);
out:
mutex_unlock(&inode->i_mutex);
return ret;
diff --git a/fs/btrfs/ioctl.c b/fs/btrfs/ioctl.c
index eff18f5..bd88f25 100644
--- a/fs/btrfs/ioctl.c
+++ b/fs/btrfs/ioctl.c
@@ -27,7 +27,6 @@
#include <linux/time.h>
#include <linux/init.h>
#include <linux/string.h>
-#include <linux/smp_lock.h>
#include <linux/backing-dev.h>
#include <linux/mount.h>
#include <linux/mpage.h>
@@ -1028,7 +1027,8 @@
struct btrfs_file_extent_item);
comp = btrfs_file_extent_compression(leaf, extent);
type = btrfs_file_extent_type(leaf, extent);
- if (type == BTRFS_FILE_EXTENT_REG) {
+ if (type == BTRFS_FILE_EXTENT_REG ||
+ type == BTRFS_FILE_EXTENT_PREALLOC) {
disko = btrfs_file_extent_disk_bytenr(leaf,
extent);
diskl = btrfs_file_extent_disk_num_bytes(leaf,
@@ -1051,7 +1051,8 @@
new_key.objectid = inode->i_ino;
new_key.offset = key.offset + destoff - off;
- if (type == BTRFS_FILE_EXTENT_REG) {
+ if (type == BTRFS_FILE_EXTENT_REG ||
+ type == BTRFS_FILE_EXTENT_PREALLOC) {
ret = btrfs_insert_empty_item(trans, root, path,
&new_key, size);
if (ret)
diff --git a/fs/btrfs/relocation.c b/fs/btrfs/relocation.c
index b23dc20..0083979 100644
--- a/fs/btrfs/relocation.c
+++ b/fs/btrfs/relocation.c
@@ -1788,7 +1788,7 @@
btrfs_end_transaction(trans, root);
}
- btrfs_drop_dead_root(reloc_root);
+ btrfs_drop_snapshot(reloc_root, 0);
if (atomic_dec_and_test(async->num_pending))
complete(async->done);
@@ -2075,9 +2075,6 @@
ret = btrfs_drop_subtree(trans, root, eb, upper->eb);
BUG_ON(ret);
-
- btrfs_tree_unlock(eb);
- free_extent_buffer(eb);
}
if (!lowest) {
btrfs_tree_unlock(upper->eb);
diff --git a/fs/btrfs/super.c b/fs/btrfs/super.c
index 9f179d4..6d6d06c 100644
--- a/fs/btrfs/super.c
+++ b/fs/btrfs/super.c
@@ -26,7 +26,6 @@
#include <linux/init.h>
#include <linux/seq_file.h>
#include <linux/string.h>
-#include <linux/smp_lock.h>
#include <linux/backing-dev.h>
#include <linux/mount.h>
#include <linux/mpage.h>
diff --git a/fs/btrfs/transaction.c b/fs/btrfs/transaction.c
index 4e83457..2dbf1c1 100644
--- a/fs/btrfs/transaction.c
+++ b/fs/btrfs/transaction.c
@@ -593,6 +593,7 @@
return 0;
}
+#if 0
/*
* when dropping snapshots, we generate a ton of delayed refs, and it makes
* sense not to join the transaction while it is trying to flush the current
@@ -681,6 +682,7 @@
btrfs_btree_balance_dirty(tree_root, nr);
return ret;
}
+#endif
/*
* new snapshots need to be created at a very specific time in the
@@ -1081,7 +1083,7 @@
while (!list_empty(&list)) {
root = list_entry(list.next, struct btrfs_root, root_list);
list_del_init(&root->root_list);
- btrfs_drop_dead_root(root);
+ btrfs_drop_snapshot(root, 0);
}
return 0;
}
diff --git a/fs/char_dev.c b/fs/char_dev.c
index b7c9d51..a173551 100644
--- a/fs/char_dev.c
+++ b/fs/char_dev.c
@@ -13,7 +13,6 @@
#include <linux/major.h>
#include <linux/errno.h>
#include <linux/module.h>
-#include <linux/smp_lock.h>
#include <linux/seq_file.h>
#include <linux/kobject.h>
diff --git a/fs/cifs/CHANGES b/fs/cifs/CHANGES
index b486898..92888aa 100644
--- a/fs/cifs/CHANGES
+++ b/fs/cifs/CHANGES
@@ -5,7 +5,11 @@
on by default if server supports it). Add forceuid and forcegid
mount options (so that when negotiating unix extensions specifying
which uid mounted does not immediately force the server's reported
-uids to be overridden).
+uids to be overridden). Add support for scope mount parm. Improve
+hard link detection to use same inode for both. Do not set
+read-only dos attribute on directories (for chmod) since Windows
+explorer special cases this attribute bit for directories for
+a different purpose.
Version 1.58
------------
diff --git a/fs/cifs/asn1.c b/fs/cifs/asn1.c
index 1b09f16..20692fb 100644
--- a/fs/cifs/asn1.c
+++ b/fs/cifs/asn1.c
@@ -49,6 +49,7 @@
#define ASN1_OJI 6 /* Object Identifier */
#define ASN1_OJD 7 /* Object Description */
#define ASN1_EXT 8 /* External */
+#define ASN1_ENUM 10 /* Enumerated */
#define ASN1_SEQ 16 /* Sequence */
#define ASN1_SET 17 /* Set */
#define ASN1_NUMSTR 18 /* Numerical String */
@@ -78,10 +79,12 @@
#define SPNEGO_OID_LEN 7
#define NTLMSSP_OID_LEN 10
#define KRB5_OID_LEN 7
+#define KRB5U2U_OID_LEN 8
#define MSKRB5_OID_LEN 7
static unsigned long SPNEGO_OID[7] = { 1, 3, 6, 1, 5, 5, 2 };
static unsigned long NTLMSSP_OID[10] = { 1, 3, 6, 1, 4, 1, 311, 2, 2, 10 };
static unsigned long KRB5_OID[7] = { 1, 2, 840, 113554, 1, 2, 2 };
+static unsigned long KRB5U2U_OID[8] = { 1, 2, 840, 113554, 1, 2, 2, 3 };
static unsigned long MSKRB5_OID[7] = { 1, 2, 840, 48018, 1, 2, 2 };
/*
@@ -122,6 +125,28 @@
return 1;
}
+#if 0 /* will be needed later by spnego decoding/encoding of ntlmssp */
+static unsigned char
+asn1_enum_decode(struct asn1_ctx *ctx, __le32 *val)
+{
+ unsigned char ch;
+
+ if (ctx->pointer >= ctx->end) {
+ ctx->error = ASN1_ERR_DEC_EMPTY;
+ return 0;
+ }
+
+ ch = *(ctx->pointer)++; /* ch has 0xa, ptr points to lenght octet */
+ if ((ch) == ASN1_ENUM) /* if ch value is ENUM, 0xa */
+ *val = *(++(ctx->pointer)); /* value has enum value */
+ else
+ return 0;
+
+ ctx->pointer++;
+ return 1;
+}
+#endif
+
static unsigned char
asn1_tag_decode(struct asn1_ctx *ctx, unsigned int *tag)
{
@@ -476,10 +501,9 @@
unsigned int cls, con, tag, oidlen, rc;
bool use_ntlmssp = false;
bool use_kerberos = false;
+ bool use_kerberosu2u = false;
bool use_mskerberos = false;
- *secType = NTLM; /* BB eventually make Kerberos or NLTMSSP the default*/
-
/* cifs_dump_mem(" Received SecBlob ", security_blob, length); */
asn1_open(&ctx, security_blob, length);
@@ -515,6 +539,7 @@
return 0;
}
+ /* SPNEGO */
if (asn1_header_decode(&ctx, &end, &cls, &con, &tag) == 0) {
cFYI(1, ("Error decoding negTokenInit"));
return 0;
@@ -526,6 +551,7 @@
return 0;
}
+ /* negTokenInit */
if (asn1_header_decode(&ctx, &end, &cls, &con, &tag) == 0) {
cFYI(1, ("Error decoding negTokenInit"));
return 0;
@@ -537,6 +563,7 @@
return 0;
}
+ /* sequence */
if (asn1_header_decode(&ctx, &end, &cls, &con, &tag) == 0) {
cFYI(1, ("Error decoding 2nd part of negTokenInit"));
return 0;
@@ -548,6 +575,7 @@
return 0;
}
+ /* sequence of */
if (asn1_header_decode
(&ctx, &sequence_end, &cls, &con, &tag) == 0) {
cFYI(1, ("Error decoding 2nd part of negTokenInit"));
@@ -560,6 +588,7 @@
return 0;
}
+ /* list of security mechanisms */
while (!asn1_eoc_decode(&ctx, sequence_end)) {
rc = asn1_header_decode(&ctx, &end, &cls, &con, &tag);
if (!rc) {
@@ -576,11 +605,15 @@
if (compare_oid(oid, oidlen, MSKRB5_OID,
MSKRB5_OID_LEN) &&
- !use_kerberos)
+ !use_mskerberos)
use_mskerberos = true;
+ else if (compare_oid(oid, oidlen, KRB5U2U_OID,
+ KRB5U2U_OID_LEN) &&
+ !use_kerberosu2u)
+ use_kerberosu2u = true;
else if (compare_oid(oid, oidlen, KRB5_OID,
KRB5_OID_LEN) &&
- !use_mskerberos)
+ !use_kerberos)
use_kerberos = true;
else if (compare_oid(oid, oidlen, NTLMSSP_OID,
NTLMSSP_OID_LEN))
@@ -593,7 +626,12 @@
}
}
+ /* mechlistMIC */
if (asn1_header_decode(&ctx, &end, &cls, &con, &tag) == 0) {
+ /* Check if we have reached the end of the blob, but with
+ no mechListMic (e.g. NTLMSSP instead of KRB5) */
+ if (ctx.error == ASN1_ERR_DEC_EMPTY)
+ goto decode_negtoken_exit;
cFYI(1, ("Error decoding last part negTokenInit exit3"));
return 0;
} else if ((cls != ASN1_CTX) || (con != ASN1_CON)) {
@@ -602,6 +640,8 @@
cls, con, tag, end, *end));
return 0;
}
+
+ /* sequence */
if (asn1_header_decode(&ctx, &end, &cls, &con, &tag) == 0) {
cFYI(1, ("Error decoding last part negTokenInit exit5"));
return 0;
@@ -611,6 +651,7 @@
cls, con, tag, end, *end));
}
+ /* sequence of */
if (asn1_header_decode(&ctx, &end, &cls, &con, &tag) == 0) {
cFYI(1, ("Error decoding last part negTokenInit exit 7"));
return 0;
@@ -619,6 +660,8 @@
cls, con, tag, end, *end));
return 0;
}
+
+ /* general string */
if (asn1_header_decode(&ctx, &end, &cls, &con, &tag) == 0) {
cFYI(1, ("Error decoding last part negTokenInit exit9"));
return 0;
@@ -630,13 +673,13 @@
}
cFYI(1, ("Need to call asn1_octets_decode() function for %s",
ctx.pointer)); /* is this UTF-8 or ASCII? */
-
+decode_negtoken_exit:
if (use_kerberos)
*secType = Kerberos;
else if (use_mskerberos)
*secType = MSKerberos;
else if (use_ntlmssp)
- *secType = NTLMSSP;
+ *secType = RawNTLMSSP;
return 1;
}
diff --git a/fs/cifs/cifs_spnego.c b/fs/cifs/cifs_spnego.c
index 4a4581c..051caec 100644
--- a/fs/cifs/cifs_spnego.c
+++ b/fs/cifs/cifs_spnego.c
@@ -86,6 +86,9 @@
/* strlen of ";user=" */
#define USER_KEY_LEN 6
+/* strlen of ";pid=0x" */
+#define PID_KEY_LEN 7
+
/* get a key struct with a SPNEGO security blob, suitable for session setup */
struct key *
cifs_get_spnego_key(struct cifsSesInfo *sesInfo)
@@ -103,7 +106,8 @@
IP_KEY_LEN + INET6_ADDRSTRLEN +
MAX_MECH_STR_LEN +
UID_KEY_LEN + (sizeof(uid_t) * 2) +
- USER_KEY_LEN + strlen(sesInfo->userName) + 1;
+ USER_KEY_LEN + strlen(sesInfo->userName) +
+ PID_KEY_LEN + (sizeof(pid_t) * 2) + 1;
spnego_key = ERR_PTR(-ENOMEM);
description = kzalloc(desc_len, GFP_KERNEL);
@@ -141,6 +145,9 @@
dp = description + strlen(description);
sprintf(dp, ";user=%s", sesInfo->userName);
+ dp = description + strlen(description);
+ sprintf(dp, ";pid=0x%x", current->pid);
+
cFYI(1, ("key description = %s", description));
spnego_key = request_key(&cifs_spnego_key_type, description, "");
diff --git a/fs/cifs/cifsacl.c b/fs/cifs/cifsacl.c
index 1403b5d..6941c22 100644
--- a/fs/cifs/cifsacl.c
+++ b/fs/cifs/cifsacl.c
@@ -327,7 +327,7 @@
static void parse_dacl(struct cifs_acl *pdacl, char *end_of_acl,
struct cifs_sid *pownersid, struct cifs_sid *pgrpsid,
- struct inode *inode)
+ struct cifs_fattr *fattr)
{
int i;
int num_aces = 0;
@@ -340,7 +340,7 @@
if (!pdacl) {
/* no DACL in the security descriptor, set
all the permissions for user/group/other */
- inode->i_mode |= S_IRWXUGO;
+ fattr->cf_mode |= S_IRWXUGO;
return;
}
@@ -357,7 +357,7 @@
/* reset rwx permissions for user/group/other.
Also, if num_aces is 0 i.e. DACL has no ACEs,
user/group/other have no permissions */
- inode->i_mode &= ~(S_IRWXUGO);
+ fattr->cf_mode &= ~(S_IRWXUGO);
acl_base = (char *)pdacl;
acl_size = sizeof(struct cifs_acl);
@@ -379,17 +379,17 @@
if (compare_sids(&(ppace[i]->sid), pownersid))
access_flags_to_mode(ppace[i]->access_req,
ppace[i]->type,
- &(inode->i_mode),
+ &fattr->cf_mode,
&user_mask);
if (compare_sids(&(ppace[i]->sid), pgrpsid))
access_flags_to_mode(ppace[i]->access_req,
ppace[i]->type,
- &(inode->i_mode),
+ &fattr->cf_mode,
&group_mask);
if (compare_sids(&(ppace[i]->sid), &sid_everyone))
access_flags_to_mode(ppace[i]->access_req,
ppace[i]->type,
- &(inode->i_mode),
+ &fattr->cf_mode,
&other_mask);
/* memcpy((void *)(&(cifscred->aces[i])),
@@ -464,7 +464,7 @@
/* Convert CIFS ACL to POSIX form */
static int parse_sec_desc(struct cifs_ntsd *pntsd, int acl_len,
- struct inode *inode)
+ struct cifs_fattr *fattr)
{
int rc;
struct cifs_sid *owner_sid_ptr, *group_sid_ptr;
@@ -472,7 +472,7 @@
char *end_of_acl = ((char *)pntsd) + acl_len;
__u32 dacloffset;
- if ((inode == NULL) || (pntsd == NULL))
+ if (pntsd == NULL)
return -EIO;
owner_sid_ptr = (struct cifs_sid *)((char *)pntsd +
@@ -497,7 +497,7 @@
if (dacloffset)
parse_dacl(dacl_ptr, end_of_acl, owner_sid_ptr,
- group_sid_ptr, inode);
+ group_sid_ptr, fattr);
else
cFYI(1, ("no ACL")); /* BB grant all or default perms? */
@@ -508,7 +508,6 @@
memcpy((void *)(&(cifscred->gsid)), (void *)group_sid_ptr,
sizeof(struct cifs_sid)); */
-
return 0;
}
@@ -671,8 +670,9 @@
}
/* Translate the CIFS ACL (simlar to NTFS ACL) for a file into mode bits */
-void acl_to_uid_mode(struct cifs_sb_info *cifs_sb, struct inode *inode,
- const char *path, const __u16 *pfid)
+void
+cifs_acl_to_fattr(struct cifs_sb_info *cifs_sb, struct cifs_fattr *fattr,
+ struct inode *inode, const char *path, const __u16 *pfid)
{
struct cifs_ntsd *pntsd = NULL;
u32 acllen = 0;
@@ -687,7 +687,7 @@
/* if we can retrieve the ACL, now parse Access Control Entries, ACEs */
if (pntsd)
- rc = parse_sec_desc(pntsd, acllen, inode);
+ rc = parse_sec_desc(pntsd, acllen, fattr);
if (rc)
cFYI(1, ("parse sec desc failed rc = %d", rc));
diff --git a/fs/cifs/cifsfs.c b/fs/cifs/cifsfs.c
index 0d92114..44f3050 100644
--- a/fs/cifs/cifsfs.c
+++ b/fs/cifs/cifsfs.c
@@ -308,7 +308,6 @@
if (!cifs_inode)
return NULL;
cifs_inode->cifsAttrs = 0x20; /* default */
- atomic_set(&cifs_inode->inUse, 0);
cifs_inode->time = 0;
cifs_inode->write_behind_rc = 0;
/* Until the file is open and we have gotten oplock
@@ -333,6 +332,27 @@
kmem_cache_free(cifs_inode_cachep, CIFS_I(inode));
}
+static void
+cifs_show_address(struct seq_file *s, struct TCP_Server_Info *server)
+{
+ seq_printf(s, ",addr=");
+
+ switch (server->addr.sockAddr.sin_family) {
+ case AF_INET:
+ seq_printf(s, "%pI4", &server->addr.sockAddr.sin_addr.s_addr);
+ break;
+ case AF_INET6:
+ seq_printf(s, "%pI6",
+ &server->addr.sockAddr6.sin6_addr.s6_addr);
+ if (server->addr.sockAddr6.sin6_scope_id)
+ seq_printf(s, "%%%u",
+ server->addr.sockAddr6.sin6_scope_id);
+ break;
+ default:
+ seq_printf(s, "(unknown)");
+ }
+}
+
/*
* cifs_show_options() is for displaying mount options in /proc/mounts.
* Not all settable options are displayed but most of the important
@@ -343,83 +363,64 @@
{
struct cifs_sb_info *cifs_sb;
struct cifsTconInfo *tcon;
- struct TCP_Server_Info *server;
cifs_sb = CIFS_SB(m->mnt_sb);
+ tcon = cifs_sb->tcon;
- if (cifs_sb) {
- tcon = cifs_sb->tcon;
- if (tcon) {
- seq_printf(s, ",unc=%s", cifs_sb->tcon->treeName);
- if (tcon->ses) {
- if (tcon->ses->userName)
- seq_printf(s, ",username=%s",
- tcon->ses->userName);
- if (tcon->ses->domainName)
- seq_printf(s, ",domain=%s",
- tcon->ses->domainName);
- server = tcon->ses->server;
- if (server) {
- seq_printf(s, ",addr=");
- switch (server->addr.sockAddr6.
- sin6_family) {
- case AF_INET6:
- seq_printf(s, "%pI6",
- &server->addr.sockAddr6.sin6_addr);
- break;
- case AF_INET:
- seq_printf(s, "%pI4",
- &server->addr.sockAddr.sin_addr.s_addr);
- break;
- }
- }
- }
- if ((cifs_sb->mnt_cifs_flags & CIFS_MOUNT_OVERR_UID) ||
- !(tcon->unix_ext))
- seq_printf(s, ",uid=%d", cifs_sb->mnt_uid);
- if ((cifs_sb->mnt_cifs_flags & CIFS_MOUNT_OVERR_GID) ||
- !(tcon->unix_ext))
- seq_printf(s, ",gid=%d", cifs_sb->mnt_gid);
- if (!tcon->unix_ext) {
- seq_printf(s, ",file_mode=0%o,dir_mode=0%o",
+ seq_printf(s, ",unc=%s", cifs_sb->tcon->treeName);
+ if (tcon->ses->userName)
+ seq_printf(s, ",username=%s", tcon->ses->userName);
+ if (tcon->ses->domainName)
+ seq_printf(s, ",domain=%s", tcon->ses->domainName);
+
+ seq_printf(s, ",uid=%d", cifs_sb->mnt_uid);
+ if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_OVERR_UID)
+ seq_printf(s, ",forceuid");
+
+ seq_printf(s, ",gid=%d", cifs_sb->mnt_gid);
+ if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_OVERR_GID)
+ seq_printf(s, ",forcegid");
+
+ cifs_show_address(s, tcon->ses->server);
+
+ if (!tcon->unix_ext)
+ seq_printf(s, ",file_mode=0%o,dir_mode=0%o",
cifs_sb->mnt_file_mode,
cifs_sb->mnt_dir_mode);
- }
- if (tcon->seal)
- seq_printf(s, ",seal");
- if (tcon->nocase)
- seq_printf(s, ",nocase");
- if (tcon->retry)
- seq_printf(s, ",hard");
- }
- if (cifs_sb->prepath)
- seq_printf(s, ",prepath=%s", cifs_sb->prepath);
- if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_POSIX_PATHS)
- seq_printf(s, ",posixpaths");
- if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_SET_UID)
- seq_printf(s, ",setuids");
- if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_SERVER_INUM)
- seq_printf(s, ",serverino");
- if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_DIRECT_IO)
- seq_printf(s, ",directio");
- if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_NO_XATTR)
- seq_printf(s, ",nouser_xattr");
- if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_MAP_SPECIAL_CHR)
- seq_printf(s, ",mapchars");
- if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_UNX_EMUL)
- seq_printf(s, ",sfu");
- if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_NO_BRL)
- seq_printf(s, ",nobrl");
- if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_CIFS_ACL)
- seq_printf(s, ",cifsacl");
- if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_DYNPERM)
- seq_printf(s, ",dynperm");
- if (m->mnt_sb->s_flags & MS_POSIXACL)
- seq_printf(s, ",acl");
+ if (tcon->seal)
+ seq_printf(s, ",seal");
+ if (tcon->nocase)
+ seq_printf(s, ",nocase");
+ if (tcon->retry)
+ seq_printf(s, ",hard");
+ if (cifs_sb->prepath)
+ seq_printf(s, ",prepath=%s", cifs_sb->prepath);
+ if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_POSIX_PATHS)
+ seq_printf(s, ",posixpaths");
+ if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_SET_UID)
+ seq_printf(s, ",setuids");
+ if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_SERVER_INUM)
+ seq_printf(s, ",serverino");
+ if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_DIRECT_IO)
+ seq_printf(s, ",directio");
+ if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_NO_XATTR)
+ seq_printf(s, ",nouser_xattr");
+ if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_MAP_SPECIAL_CHR)
+ seq_printf(s, ",mapchars");
+ if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_UNX_EMUL)
+ seq_printf(s, ",sfu");
+ if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_NO_BRL)
+ seq_printf(s, ",nobrl");
+ if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_CIFS_ACL)
+ seq_printf(s, ",cifsacl");
+ if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_DYNPERM)
+ seq_printf(s, ",dynperm");
+ if (m->mnt_sb->s_flags & MS_POSIXACL)
+ seq_printf(s, ",acl");
- seq_printf(s, ",rsize=%d", cifs_sb->rsize);
- seq_printf(s, ",wsize=%d", cifs_sb->wsize);
- }
+ seq_printf(s, ",rsize=%d", cifs_sb->rsize);
+ seq_printf(s, ",wsize=%d", cifs_sb->wsize);
+
return 0;
}
@@ -535,9 +536,14 @@
if (tcon == NULL)
return;
- lock_kernel();
read_lock(&cifs_tcp_ses_lock);
- if (tcon->tc_count == 1)
+ if ((tcon->tc_count > 1) || (tcon->tidStatus == CifsExiting)) {
+ /* we have other mounts to same share or we have
+ already tried to force umount this and woken up
+ all waiting network requests, nothing to do */
+ read_unlock(&cifs_tcp_ses_lock);
+ return;
+ } else if (tcon->tc_count == 1)
tcon->tidStatus = CifsExiting;
read_unlock(&cifs_tcp_ses_lock);
@@ -552,9 +558,7 @@
wake_up_all(&tcon->ses->server->response_q);
msleep(1);
}
-/* BB FIXME - finish add checks for tidStatus BB */
- unlock_kernel();
return;
}
diff --git a/fs/cifs/cifsfs.h b/fs/cifs/cifsfs.h
index 9570a0e..6c17094 100644
--- a/fs/cifs/cifsfs.h
+++ b/fs/cifs/cifsfs.h
@@ -24,6 +24,19 @@
#define ROOT_I 2
+/*
+ * ino_t is 32-bits on 32-bit arch. We have to squash the 64-bit value down
+ * so that it will fit.
+ */
+static inline ino_t
+cifs_uniqueid_to_ino_t(u64 fileid)
+{
+ ino_t ino = (ino_t) fileid;
+ if (sizeof(ino_t) < sizeof(u64))
+ ino ^= fileid >> (sizeof(u64)-sizeof(ino_t)) * 8;
+ return ino;
+}
+
extern struct file_system_type cifs_fs_type;
extern const struct address_space_operations cifs_addr_ops;
extern const struct address_space_operations cifs_addr_ops_smallbuf;
@@ -100,5 +113,5 @@
extern const struct export_operations cifs_export_ops;
#endif /* EXPERIMENTAL */
-#define CIFS_VERSION "1.59"
+#define CIFS_VERSION "1.60"
#endif /* _CIFSFS_H */
diff --git a/fs/cifs/cifsglob.h b/fs/cifs/cifsglob.h
index a61ab77..63f6cdf 100644
--- a/fs/cifs/cifsglob.h
+++ b/fs/cifs/cifsglob.h
@@ -83,7 +83,7 @@
NTLM, /* Legacy NTLM012 auth with NTLM hash */
NTLMv2, /* Legacy NTLM auth with NTLMv2 hash */
RawNTLMSSP, /* NTLMSSP without SPNEGO, NTLMv2 hash */
- NTLMSSP, /* NTLMSSP via SPNEGO, NTLMv2 hash */
+/* NTLMSSP, */ /* can use rawNTLMSSP instead of NTLMSSP via SPNEGO */
Kerberos, /* Kerberos via SPNEGO */
MSKerberos, /* MS Kerberos via SPNEGO */
};
@@ -364,13 +364,13 @@
struct list_head openFileList;
int write_behind_rc;
__u32 cifsAttrs; /* e.g. DOS archive bit, sparse, compressed, system */
- atomic_t inUse; /* num concurrent users (local openers cifs) of file*/
unsigned long time; /* jiffies of last update/check of inode */
bool clientCanCacheRead:1; /* read oplock */
bool clientCanCacheAll:1; /* read and writebehind oplock */
bool oplockPending:1;
bool delete_pending:1; /* DELETE_ON_CLOSE is set */
u64 server_eof; /* current file size on server */
+ u64 uniqueid; /* server inode number */
struct inode vfs_inode;
};
@@ -472,6 +472,32 @@
char *node_name;
};
+/*
+ * common struct for holding inode info when searching for or updating an
+ * inode with new info
+ */
+
+#define CIFS_FATTR_DFS_REFERRAL 0x1
+#define CIFS_FATTR_DELETE_PENDING 0x2
+#define CIFS_FATTR_NEED_REVAL 0x4
+
+struct cifs_fattr {
+ u32 cf_flags;
+ u32 cf_cifsattrs;
+ u64 cf_uniqueid;
+ u64 cf_eof;
+ u64 cf_bytes;
+ uid_t cf_uid;
+ gid_t cf_gid;
+ umode_t cf_mode;
+ dev_t cf_rdev;
+ unsigned int cf_nlink;
+ unsigned int cf_dtype;
+ struct timespec cf_atime;
+ struct timespec cf_mtime;
+ struct timespec cf_ctime;
+};
+
static inline void free_dfs_info_param(struct dfs_info3_param *param)
{
if (param) {
diff --git a/fs/cifs/cifspdu.h b/fs/cifs/cifspdu.h
index a785f69..2d07f89 100644
--- a/fs/cifs/cifspdu.h
+++ b/fs/cifs/cifspdu.h
@@ -2328,19 +2328,7 @@
typedef struct {
__le32 NextEntryOffset;
__u32 ResumeKey; /* as with FileIndex - no need to convert */
- __le64 EndOfFile;
- __le64 NumOfBytes;
- __le64 LastStatusChange; /*SNIA specs DCE time for the 3 time fields */
- __le64 LastAccessTime;
- __le64 LastModificationTime;
- __le64 Uid;
- __le64 Gid;
- __le32 Type;
- __le64 DevMajor;
- __le64 DevMinor;
- __le64 UniqueId;
- __le64 Permissions;
- __le64 Nlinks;
+ FILE_UNIX_BASIC_INFO basic;
char FileName[1];
} __attribute__((packed)) FILE_UNIX_INFO; /* level 0x202 */
diff --git a/fs/cifs/cifsproto.h b/fs/cifs/cifsproto.h
index f945232..da8fbf5 100644
--- a/fs/cifs/cifsproto.h
+++ b/fs/cifs/cifsproto.h
@@ -74,7 +74,7 @@
extern unsigned int smbCalcSize_LE(struct smb_hdr *ptr);
extern int decode_negTokenInit(unsigned char *security_blob, int length,
enum securityEnum *secType);
-extern int cifs_inet_pton(const int, const char *source, void *dst);
+extern int cifs_convert_address(char *src, void *dst);
extern int map_smb_to_linux_error(struct smb_hdr *smb, int logErr);
extern void header_assemble(struct smb_hdr *, char /* command */ ,
const struct cifsTconInfo *, int /* length of
@@ -98,9 +98,13 @@
extern int cifs_posix_open(char *full_path, struct inode **pinode,
struct super_block *sb, int mode, int oflags,
int *poplock, __u16 *pnetfid, int xid);
-extern void posix_fill_in_inode(struct inode *tmp_inode,
- FILE_UNIX_BASIC_INFO *pData, int isNewInode);
-extern struct inode *cifs_new_inode(struct super_block *sb, __u64 *inum);
+extern void cifs_unix_basic_to_fattr(struct cifs_fattr *fattr,
+ FILE_UNIX_BASIC_INFO *info,
+ struct cifs_sb_info *cifs_sb);
+extern void cifs_fattr_to_inode(struct inode *inode, struct cifs_fattr *fattr);
+extern struct inode *cifs_iget(struct super_block *sb,
+ struct cifs_fattr *fattr);
+
extern int cifs_get_inode_info(struct inode **pinode,
const unsigned char *search_path,
FILE_ALL_INFO *pfile_info,
@@ -108,8 +112,9 @@
extern int cifs_get_inode_info_unix(struct inode **pinode,
const unsigned char *search_path,
struct super_block *sb, int xid);
-extern void acl_to_uid_mode(struct cifs_sb_info *cifs_sb, struct inode *inode,
- const char *path, const __u16 *pfid);
+extern void cifs_acl_to_fattr(struct cifs_sb_info *cifs_sb,
+ struct cifs_fattr *fattr, struct inode *inode,
+ const char *path, const __u16 *pfid);
extern int mode_to_acl(struct inode *inode, const char *path, __u64);
extern int cifs_mount(struct super_block *, struct cifs_sb_info *, char *,
@@ -215,7 +220,11 @@
dev_t device;
};
-extern int CIFSSMBUnixSetInfo(const int xid, struct cifsTconInfo *pTcon,
+extern int CIFSSMBUnixSetFileInfo(const int xid, struct cifsTconInfo *tcon,
+ const struct cifs_unix_set_info_args *args,
+ u16 fid, u32 pid_of_opener);
+
+extern int CIFSSMBUnixSetPathInfo(const int xid, struct cifsTconInfo *pTcon,
char *fileName,
const struct cifs_unix_set_info_args *args,
const struct nls_table *nls_codepage,
diff --git a/fs/cifs/cifssmb.c b/fs/cifs/cifssmb.c
index b84c61d..922f5fe 100644
--- a/fs/cifs/cifssmb.c
+++ b/fs/cifs/cifssmb.c
@@ -594,7 +594,7 @@
else if (secFlags & CIFSSEC_MAY_KRB5)
server->secType = Kerberos;
else if (secFlags & CIFSSEC_MAY_NTLMSSP)
- server->secType = NTLMSSP;
+ server->secType = RawNTLMSSP;
else if (secFlags & CIFSSEC_MAY_LANMAN)
server->secType = LANMAN;
/* #ifdef CONFIG_CIFS_EXPERIMENTAL
@@ -729,7 +729,7 @@
* the tcon is no longer on the list, so no need to take lock before
* checking this.
*/
- if (tcon->need_reconnect)
+ if ((tcon->need_reconnect) || (tcon->ses->need_reconnect))
return 0;
rc = small_smb_init(SMB_COM_TREE_DISCONNECT, 0, tcon,
@@ -5074,10 +5074,114 @@
}
#endif /* temporarily unneeded SetAttr legacy function */
+static void
+cifs_fill_unix_set_info(FILE_UNIX_BASIC_INFO *data_offset,
+ const struct cifs_unix_set_info_args *args)
+{
+ u64 mode = args->mode;
+
+ /*
+ * Samba server ignores set of file size to zero due to bugs in some
+ * older clients, but we should be precise - we use SetFileSize to
+ * set file size and do not want to truncate file size to zero
+ * accidently as happened on one Samba server beta by putting
+ * zero instead of -1 here
+ */
+ data_offset->EndOfFile = cpu_to_le64(NO_CHANGE_64);
+ data_offset->NumOfBytes = cpu_to_le64(NO_CHANGE_64);
+ data_offset->LastStatusChange = cpu_to_le64(args->ctime);
+ data_offset->LastAccessTime = cpu_to_le64(args->atime);
+ data_offset->LastModificationTime = cpu_to_le64(args->mtime);
+ data_offset->Uid = cpu_to_le64(args->uid);
+ data_offset->Gid = cpu_to_le64(args->gid);
+ /* better to leave device as zero when it is */
+ data_offset->DevMajor = cpu_to_le64(MAJOR(args->device));
+ data_offset->DevMinor = cpu_to_le64(MINOR(args->device));
+ data_offset->Permissions = cpu_to_le64(mode);
+
+ if (S_ISREG(mode))
+ data_offset->Type = cpu_to_le32(UNIX_FILE);
+ else if (S_ISDIR(mode))
+ data_offset->Type = cpu_to_le32(UNIX_DIR);
+ else if (S_ISLNK(mode))
+ data_offset->Type = cpu_to_le32(UNIX_SYMLINK);
+ else if (S_ISCHR(mode))
+ data_offset->Type = cpu_to_le32(UNIX_CHARDEV);
+ else if (S_ISBLK(mode))
+ data_offset->Type = cpu_to_le32(UNIX_BLOCKDEV);
+ else if (S_ISFIFO(mode))
+ data_offset->Type = cpu_to_le32(UNIX_FIFO);
+ else if (S_ISSOCK(mode))
+ data_offset->Type = cpu_to_le32(UNIX_SOCKET);
+}
+
int
-CIFSSMBUnixSetInfo(const int xid, struct cifsTconInfo *tcon, char *fileName,
- const struct cifs_unix_set_info_args *args,
- const struct nls_table *nls_codepage, int remap)
+CIFSSMBUnixSetFileInfo(const int xid, struct cifsTconInfo *tcon,
+ const struct cifs_unix_set_info_args *args,
+ u16 fid, u32 pid_of_opener)
+{
+ struct smb_com_transaction2_sfi_req *pSMB = NULL;
+ FILE_UNIX_BASIC_INFO *data_offset;
+ int rc = 0;
+ u16 params, param_offset, offset, byte_count, count;
+
+ cFYI(1, ("Set Unix Info (via SetFileInfo)"));
+ rc = small_smb_init(SMB_COM_TRANSACTION2, 15, tcon, (void **) &pSMB);
+
+ if (rc)
+ return rc;
+
+ pSMB->hdr.Pid = cpu_to_le16((__u16)pid_of_opener);
+ pSMB->hdr.PidHigh = cpu_to_le16((__u16)(pid_of_opener >> 16));
+
+ params = 6;
+ pSMB->MaxSetupCount = 0;
+ pSMB->Reserved = 0;
+ pSMB->Flags = 0;
+ pSMB->Timeout = 0;
+ pSMB->Reserved2 = 0;
+ param_offset = offsetof(struct smb_com_transaction2_sfi_req, Fid) - 4;
+ offset = param_offset + params;
+
+ data_offset = (FILE_UNIX_BASIC_INFO *)
+ ((char *)(&pSMB->hdr.Protocol) + offset);
+ count = sizeof(FILE_UNIX_BASIC_INFO);
+
+ pSMB->MaxParameterCount = cpu_to_le16(2);
+ /* BB find max SMB PDU from sess */
+ pSMB->MaxDataCount = cpu_to_le16(1000);
+ pSMB->SetupCount = 1;
+ pSMB->Reserved3 = 0;
+ pSMB->SubCommand = cpu_to_le16(TRANS2_SET_FILE_INFORMATION);
+ byte_count = 3 /* pad */ + params + count;
+ pSMB->DataCount = cpu_to_le16(count);
+ pSMB->ParameterCount = cpu_to_le16(params);
+ pSMB->TotalDataCount = pSMB->DataCount;
+ pSMB->TotalParameterCount = pSMB->ParameterCount;
+ pSMB->ParameterOffset = cpu_to_le16(param_offset);
+ pSMB->DataOffset = cpu_to_le16(offset);
+ pSMB->Fid = fid;
+ pSMB->InformationLevel = cpu_to_le16(SMB_SET_FILE_UNIX_BASIC);
+ pSMB->Reserved4 = 0;
+ pSMB->hdr.smb_buf_length += byte_count;
+ pSMB->ByteCount = cpu_to_le16(byte_count);
+
+ cifs_fill_unix_set_info(data_offset, args);
+
+ rc = SendReceiveNoRsp(xid, tcon->ses, (struct smb_hdr *) pSMB, 0);
+ if (rc)
+ cFYI(1, ("Send error in Set Time (SetFileInfo) = %d", rc));
+
+ /* Note: On -EAGAIN error only caller can retry on handle based calls
+ since file handle passed in no longer valid */
+
+ return rc;
+}
+
+int
+CIFSSMBUnixSetPathInfo(const int xid, struct cifsTconInfo *tcon, char *fileName,
+ const struct cifs_unix_set_info_args *args,
+ const struct nls_table *nls_codepage, int remap)
{
TRANSACTION2_SPI_REQ *pSMB = NULL;
TRANSACTION2_SPI_RSP *pSMBr = NULL;
@@ -5086,7 +5190,6 @@
int bytes_returned = 0;
FILE_UNIX_BASIC_INFO *data_offset;
__u16 params, param_offset, offset, count, byte_count;
- __u64 mode = args->mode;
cFYI(1, ("In SetUID/GID/Mode"));
setPermsRetry:
@@ -5137,38 +5240,8 @@
pSMB->InformationLevel = cpu_to_le16(SMB_SET_FILE_UNIX_BASIC);
pSMB->Reserved4 = 0;
pSMB->hdr.smb_buf_length += byte_count;
- /* Samba server ignores set of file size to zero due to bugs in some
- older clients, but we should be precise - we use SetFileSize to
- set file size and do not want to truncate file size to zero
- accidently as happened on one Samba server beta by putting
- zero instead of -1 here */
- data_offset->EndOfFile = cpu_to_le64(NO_CHANGE_64);
- data_offset->NumOfBytes = cpu_to_le64(NO_CHANGE_64);
- data_offset->LastStatusChange = cpu_to_le64(args->ctime);
- data_offset->LastAccessTime = cpu_to_le64(args->atime);
- data_offset->LastModificationTime = cpu_to_le64(args->mtime);
- data_offset->Uid = cpu_to_le64(args->uid);
- data_offset->Gid = cpu_to_le64(args->gid);
- /* better to leave device as zero when it is */
- data_offset->DevMajor = cpu_to_le64(MAJOR(args->device));
- data_offset->DevMinor = cpu_to_le64(MINOR(args->device));
- data_offset->Permissions = cpu_to_le64(mode);
- if (S_ISREG(mode))
- data_offset->Type = cpu_to_le32(UNIX_FILE);
- else if (S_ISDIR(mode))
- data_offset->Type = cpu_to_le32(UNIX_DIR);
- else if (S_ISLNK(mode))
- data_offset->Type = cpu_to_le32(UNIX_SYMLINK);
- else if (S_ISCHR(mode))
- data_offset->Type = cpu_to_le32(UNIX_CHARDEV);
- else if (S_ISBLK(mode))
- data_offset->Type = cpu_to_le32(UNIX_BLOCKDEV);
- else if (S_ISFIFO(mode))
- data_offset->Type = cpu_to_le32(UNIX_FIFO);
- else if (S_ISSOCK(mode))
- data_offset->Type = cpu_to_le32(UNIX_SOCKET);
-
+ cifs_fill_unix_set_info(data_offset, args);
pSMB->ByteCount = cpu_to_le16(byte_count);
rc = SendReceive(xid, tcon->ses, (struct smb_hdr *) pSMB,
diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c
index 97f4311..e16d759 100644
--- a/fs/cifs/connect.c
+++ b/fs/cifs/connect.c
@@ -70,7 +70,6 @@
mode_t file_mode;
mode_t dir_mode;
unsigned secFlg;
- bool rw:1;
bool retry:1;
bool intr:1;
bool setuids:1;
@@ -832,7 +831,6 @@
vol->dir_mode = vol->file_mode = S_IRUGO | S_IXUGO | S_IWUSR;
/* vol->retry default is 0 (i.e. "soft" limited retry not hard retry) */
- vol->rw = true;
/* default is always to request posix paths. */
vol->posix_paths = 1;
/* default to using server inode numbers where available */
@@ -1199,7 +1197,9 @@
} else if (strnicmp(data, "guest", 5) == 0) {
/* ignore */
} else if (strnicmp(data, "rw", 2) == 0) {
- vol->rw = true;
+ /* ignore */
+ } else if (strnicmp(data, "ro", 2) == 0) {
+ /* ignore */
} else if (strnicmp(data, "noblocksend", 11) == 0) {
vol->noblocksnd = 1;
} else if (strnicmp(data, "noautotune", 10) == 0) {
@@ -1218,8 +1218,6 @@
parse these options again and set anything and it
is ok to just ignore them */
continue;
- } else if (strnicmp(data, "ro", 2) == 0) {
- vol->rw = false;
} else if (strnicmp(data, "hard", 4) == 0) {
vol->retry = 1;
} else if (strnicmp(data, "soft", 4) == 0) {
@@ -1386,8 +1384,10 @@
server->addr.sockAddr.sin_addr.s_addr))
continue;
else if (addr->ss_family == AF_INET6 &&
- !ipv6_addr_equal(&server->addr.sockAddr6.sin6_addr,
- &addr6->sin6_addr))
+ (!ipv6_addr_equal(&server->addr.sockAddr6.sin6_addr,
+ &addr6->sin6_addr) ||
+ server->addr.sockAddr6.sin6_scope_id !=
+ addr6->sin6_scope_id))
continue;
++server->srv_count;
@@ -1433,28 +1433,15 @@
memset(&addr, 0, sizeof(struct sockaddr_storage));
+ cFYI(1, ("UNC: %s ip: %s", volume_info->UNC, volume_info->UNCip));
+
if (volume_info->UNCip && volume_info->UNC) {
- rc = cifs_inet_pton(AF_INET, volume_info->UNCip,
- &sin_server->sin_addr.s_addr);
-
- if (rc <= 0) {
- /* not ipv4 address, try ipv6 */
- rc = cifs_inet_pton(AF_INET6, volume_info->UNCip,
- &sin_server6->sin6_addr.in6_u);
- if (rc > 0)
- addr.ss_family = AF_INET6;
- } else {
- addr.ss_family = AF_INET;
- }
-
- if (rc <= 0) {
+ rc = cifs_convert_address(volume_info->UNCip, &addr);
+ if (!rc) {
/* we failed translating address */
rc = -EINVAL;
goto out_err;
}
-
- cFYI(1, ("UNC: %s ip: %s", volume_info->UNC,
- volume_info->UNCip));
} else if (volume_info->UNCip) {
/* BB using ip addr as tcp_ses name to connect to the
DFS root below */
@@ -1513,14 +1500,14 @@
cFYI(1, ("attempting ipv6 connect"));
/* BB should we allow ipv6 on port 139? */
/* other OS never observed in Wild doing 139 with v6 */
+ sin_server6->sin6_port = htons(volume_info->port);
memcpy(&tcp_ses->addr.sockAddr6, sin_server6,
sizeof(struct sockaddr_in6));
- sin_server6->sin6_port = htons(volume_info->port);
rc = ipv6_connect(tcp_ses);
} else {
+ sin_server->sin_port = htons(volume_info->port);
memcpy(&tcp_ses->addr.sockAddr, sin_server,
sizeof(struct sockaddr_in));
- sin_server->sin_port = htons(volume_info->port);
rc = ipv4_connect(tcp_ses);
}
if (rc < 0) {
diff --git a/fs/cifs/dir.c b/fs/cifs/dir.c
index 3758965d..4326ffd 100644
--- a/fs/cifs/dir.c
+++ b/fs/cifs/dir.c
@@ -188,6 +188,7 @@
FILE_UNIX_BASIC_INFO *presp_data;
__u32 posix_flags = 0;
struct cifs_sb_info *cifs_sb = CIFS_SB(sb);
+ struct cifs_fattr fattr;
cFYI(1, ("posix open %s", full_path));
@@ -236,22 +237,21 @@
if (presp_data->Type == cpu_to_le32(-1))
goto posix_open_ret; /* open ok, caller does qpathinfo */
- /* get new inode and set it up */
if (!pinode)
goto posix_open_ret; /* caller does not need info */
+ cifs_unix_basic_to_fattr(&fattr, presp_data, cifs_sb);
+
+ /* get new inode and set it up */
if (*pinode == NULL) {
- __u64 unique_id = le64_to_cpu(presp_data->UniqueId);
- *pinode = cifs_new_inode(sb, &unique_id);
+ *pinode = cifs_iget(sb, &fattr);
+ if (!*pinode) {
+ rc = -ENOMEM;
+ goto posix_open_ret;
+ }
+ } else {
+ cifs_fattr_to_inode(*pinode, &fattr);
}
- /* else an inode was passed in. Update its info, don't create one */
-
- /* We do not need to close the file if new_inode fails since
- the caller will retry qpathinfo as long as inode is null */
- if (*pinode == NULL)
- goto posix_open_ret;
-
- posix_fill_in_inode(*pinode, presp_data, 1);
cifs_fill_fileinfo(*pinode, *pnetfid, cifs_sb->tcon, write_only);
@@ -307,8 +307,9 @@
full_path = build_path_from_dentry(direntry);
if (full_path == NULL) {
+ rc = -ENOMEM;
FreeXid(xid);
- return -ENOMEM;
+ return rc;
}
if (oplockEnabled)
@@ -424,9 +425,10 @@
args.uid = NO_CHANGE_64;
args.gid = NO_CHANGE_64;
}
- CIFSSMBUnixSetInfo(xid, tcon, full_path, &args,
- cifs_sb->local_nls,
- cifs_sb->mnt_cifs_flags & CIFS_MOUNT_MAP_SPECIAL_CHR);
+ CIFSSMBUnixSetPathInfo(xid, tcon, full_path, &args,
+ cifs_sb->local_nls,
+ cifs_sb->mnt_cifs_flags &
+ CIFS_MOUNT_MAP_SPECIAL_CHR);
} else {
/* BB implement mode setting via Windows security
descriptors e.g. */
@@ -514,10 +516,10 @@
args.uid = NO_CHANGE_64;
args.gid = NO_CHANGE_64;
}
- rc = CIFSSMBUnixSetInfo(xid, pTcon, full_path,
- &args, cifs_sb->local_nls,
- cifs_sb->mnt_cifs_flags &
- CIFS_MOUNT_MAP_SPECIAL_CHR);
+ rc = CIFSSMBUnixSetPathInfo(xid, pTcon, full_path, &args,
+ cifs_sb->local_nls,
+ cifs_sb->mnt_cifs_flags &
+ CIFS_MOUNT_MAP_SPECIAL_CHR);
if (!rc) {
rc = cifs_get_inode_info_unix(&newinode, full_path,
@@ -540,8 +542,9 @@
buf = kmalloc(sizeof(FILE_ALL_INFO), GFP_KERNEL);
if (buf == NULL) {
kfree(full_path);
+ rc = -ENOMEM;
FreeXid(xid);
- return -ENOMEM;
+ return rc;
}
rc = CIFSSMBOpen(xid, pTcon, full_path,
@@ -641,6 +644,15 @@
}
}
+ /*
+ * O_EXCL: optimize away the lookup, but don't hash the dentry. Let
+ * the VFS handle the create.
+ */
+ if (nd->flags & LOOKUP_EXCL) {
+ d_instantiate(direntry, NULL);
+ return 0;
+ }
+
/* can not grab the rename sem here since it would
deadlock in the cases (beginning of sys_rename itself)
in which we already have the sb rename sem */
diff --git a/fs/cifs/dns_resolve.c b/fs/cifs/dns_resolve.c
index df4a306..87948147 100644
--- a/fs/cifs/dns_resolve.c
+++ b/fs/cifs/dns_resolve.c
@@ -35,26 +35,11 @@
* 0 - name is not IP
*/
static int
-is_ip(const char *name)
+is_ip(char *name)
{
- int rc;
- struct sockaddr_in sin_server;
- struct sockaddr_in6 sin_server6;
+ struct sockaddr_storage ss;
- rc = cifs_inet_pton(AF_INET, name,
- &sin_server.sin_addr.s_addr);
-
- if (rc <= 0) {
- /* not ipv4 address, try ipv6 */
- rc = cifs_inet_pton(AF_INET6, name,
- &sin_server6.sin6_addr.in6_u);
- if (rc > 0)
- return 1;
- } else {
- return 1;
- }
- /* we failed translating address */
- return 0;
+ return cifs_convert_address(name, &ss);
}
static int
@@ -72,7 +57,7 @@
ip[datalen] = '\0';
/* make sure this looks like an address */
- if (!is_ip((const char *) ip)) {
+ if (!is_ip(ip)) {
kfree(ip);
return -EINVAL;
}
diff --git a/fs/cifs/file.c b/fs/cifs/file.c
index 0686684..c34b7f8 100644
--- a/fs/cifs/file.c
+++ b/fs/cifs/file.c
@@ -300,14 +300,16 @@
pCifsInode = CIFS_I(file->f_path.dentry->d_inode);
pCifsFile = cifs_fill_filedata(file);
if (pCifsFile) {
+ rc = 0;
FreeXid(xid);
- return 0;
+ return rc;
}
full_path = build_path_from_dentry(file->f_path.dentry);
if (full_path == NULL) {
+ rc = -ENOMEM;
FreeXid(xid);
- return -ENOMEM;
+ return rc;
}
cFYI(1, ("inode = 0x%p file flags are 0x%x for %s",
@@ -446,9 +448,9 @@
.mtime = NO_CHANGE_64,
.device = 0,
};
- CIFSSMBUnixSetInfo(xid, tcon, full_path, &args,
- cifs_sb->local_nls,
- cifs_sb->mnt_cifs_flags &
+ CIFSSMBUnixSetPathInfo(xid, tcon, full_path, &args,
+ cifs_sb->local_nls,
+ cifs_sb->mnt_cifs_flags &
CIFS_MOUNT_MAP_SPECIAL_CHR);
}
}
@@ -491,11 +493,12 @@
return -EBADF;
xid = GetXid();
- mutex_unlock(&pCifsFile->fh_mutex);
+ mutex_lock(&pCifsFile->fh_mutex);
if (!pCifsFile->invalidHandle) {
- mutex_lock(&pCifsFile->fh_mutex);
+ mutex_unlock(&pCifsFile->fh_mutex);
+ rc = 0;
FreeXid(xid);
- return 0;
+ return rc;
}
if (file->f_path.dentry == NULL) {
@@ -524,7 +527,7 @@
if (full_path == NULL) {
rc = -ENOMEM;
reopen_error_exit:
- mutex_lock(&pCifsFile->fh_mutex);
+ mutex_unlock(&pCifsFile->fh_mutex);
FreeXid(xid);
return rc;
}
@@ -566,14 +569,14 @@
cifs_sb->local_nls, cifs_sb->mnt_cifs_flags &
CIFS_MOUNT_MAP_SPECIAL_CHR);
if (rc) {
- mutex_lock(&pCifsFile->fh_mutex);
+ mutex_unlock(&pCifsFile->fh_mutex);
cFYI(1, ("cifs_open returned 0x%x", rc));
cFYI(1, ("oplock: %d", oplock));
} else {
reopen_success:
pCifsFile->netfid = netfid;
pCifsFile->invalidHandle = false;
- mutex_lock(&pCifsFile->fh_mutex);
+ mutex_unlock(&pCifsFile->fh_mutex);
pCifsInode = CIFS_I(inode);
if (pCifsInode) {
if (can_flush) {
@@ -845,8 +848,9 @@
tcon = cifs_sb->tcon;
if (file->private_data == NULL) {
+ rc = -EBADF;
FreeXid(xid);
- return -EBADF;
+ return rc;
}
netfid = ((struct cifsFileInfo *)file->private_data)->netfid;
@@ -1805,8 +1809,9 @@
pTcon = cifs_sb->tcon;
if (file->private_data == NULL) {
+ rc = -EBADF;
FreeXid(xid);
- return -EBADF;
+ return rc;
}
open_file = (struct cifsFileInfo *)file->private_data;
@@ -1885,8 +1890,9 @@
pTcon = cifs_sb->tcon;
if (file->private_data == NULL) {
+ rc = -EBADF;
FreeXid(xid);
- return -EBADF;
+ return rc;
}
open_file = (struct cifsFileInfo *)file->private_data;
@@ -2019,8 +2025,9 @@
xid = GetXid();
if (file->private_data == NULL) {
+ rc = -EBADF;
FreeXid(xid);
- return -EBADF;
+ return rc;
}
open_file = (struct cifsFileInfo *)file->private_data;
cifs_sb = CIFS_SB(file->f_path.dentry->d_sb);
@@ -2185,8 +2192,9 @@
xid = GetXid();
if (file->private_data == NULL) {
+ rc = -EBADF;
FreeXid(xid);
- return -EBADF;
+ return rc;
}
cFYI(1, ("readpage %p at offset %d 0x%x\n",
diff --git a/fs/cifs/inode.c b/fs/cifs/inode.c
index fad882b..18afe57 100644
--- a/fs/cifs/inode.c
+++ b/fs/cifs/inode.c
@@ -77,239 +77,202 @@
}
}
-static void cifs_unix_info_to_inode(struct inode *inode,
- FILE_UNIX_BASIC_INFO *info, int force_uid_gid)
+/* populate an inode with info from a cifs_fattr struct */
+void
+cifs_fattr_to_inode(struct inode *inode, struct cifs_fattr *fattr)
{
+ struct cifsInodeInfo *cifs_i = CIFS_I(inode);
struct cifs_sb_info *cifs_sb = CIFS_SB(inode->i_sb);
- struct cifsInodeInfo *cifsInfo = CIFS_I(inode);
- __u64 num_of_bytes = le64_to_cpu(info->NumOfBytes);
- __u64 end_of_file = le64_to_cpu(info->EndOfFile);
+ unsigned long oldtime = cifs_i->time;
- inode->i_atime = cifs_NTtimeToUnix(info->LastAccessTime);
- inode->i_mtime =
- cifs_NTtimeToUnix(info->LastModificationTime);
- inode->i_ctime = cifs_NTtimeToUnix(info->LastStatusChange);
- inode->i_mode = le64_to_cpu(info->Permissions);
+ inode->i_atime = fattr->cf_atime;
+ inode->i_mtime = fattr->cf_mtime;
+ inode->i_ctime = fattr->cf_ctime;
+ inode->i_rdev = fattr->cf_rdev;
+ inode->i_nlink = fattr->cf_nlink;
+ inode->i_uid = fattr->cf_uid;
+ inode->i_gid = fattr->cf_gid;
+
+ /* if dynperm is set, don't clobber existing mode */
+ if (inode->i_state & I_NEW ||
+ !(cifs_sb->mnt_cifs_flags & CIFS_MOUNT_DYNPERM))
+ inode->i_mode = fattr->cf_mode;
+
+ cifs_i->cifsAttrs = fattr->cf_cifsattrs;
+ cifs_i->uniqueid = fattr->cf_uniqueid;
+
+ if (fattr->cf_flags & CIFS_FATTR_NEED_REVAL)
+ cifs_i->time = 0;
+ else
+ cifs_i->time = jiffies;
+
+ cFYI(1, ("inode 0x%p old_time=%ld new_time=%ld", inode,
+ oldtime, cifs_i->time));
+
+ cifs_i->delete_pending = fattr->cf_flags & CIFS_FATTR_DELETE_PENDING;
/*
- * Since we set the inode type below we need to mask off
- * to avoid strange results if bits set above.
+ * Can't safely change the file size here if the client is writing to
+ * it due to potential races.
*/
- inode->i_mode &= ~S_IFMT;
- switch (le32_to_cpu(info->Type)) {
- case UNIX_FILE:
- inode->i_mode |= S_IFREG;
- break;
- case UNIX_SYMLINK:
- inode->i_mode |= S_IFLNK;
- break;
- case UNIX_DIR:
- inode->i_mode |= S_IFDIR;
- break;
- case UNIX_CHARDEV:
- inode->i_mode |= S_IFCHR;
- inode->i_rdev = MKDEV(le64_to_cpu(info->DevMajor),
- le64_to_cpu(info->DevMinor) & MINORMASK);
- break;
- case UNIX_BLOCKDEV:
- inode->i_mode |= S_IFBLK;
- inode->i_rdev = MKDEV(le64_to_cpu(info->DevMajor),
- le64_to_cpu(info->DevMinor) & MINORMASK);
- break;
- case UNIX_FIFO:
- inode->i_mode |= S_IFIFO;
- break;
- case UNIX_SOCKET:
- inode->i_mode |= S_IFSOCK;
- break;
- default:
- /* safest to call it a file if we do not know */
- inode->i_mode |= S_IFREG;
- cFYI(1, ("unknown type %d", le32_to_cpu(info->Type)));
- break;
- }
-
- if ((cifs_sb->mnt_cifs_flags & CIFS_MOUNT_OVERR_UID) &&
- !force_uid_gid)
- inode->i_uid = cifs_sb->mnt_uid;
- else
- inode->i_uid = le64_to_cpu(info->Uid);
-
- if ((cifs_sb->mnt_cifs_flags & CIFS_MOUNT_OVERR_GID) &&
- !force_uid_gid)
- inode->i_gid = cifs_sb->mnt_gid;
- else
- inode->i_gid = le64_to_cpu(info->Gid);
-
- inode->i_nlink = le64_to_cpu(info->Nlinks);
-
- cifsInfo->server_eof = end_of_file;
spin_lock(&inode->i_lock);
- if (is_size_safe_to_change(cifsInfo, end_of_file)) {
- /*
- * We can not safely change the file size here if the client
- * is writing to it due to potential races.
- */
- i_size_write(inode, end_of_file);
+ if (is_size_safe_to_change(cifs_i, fattr->cf_eof)) {
+ i_size_write(inode, fattr->cf_eof);
/*
* i_blocks is not related to (i_size / i_blksize),
* but instead 512 byte (2**9) size is required for
* calculating num blocks.
*/
- inode->i_blocks = (512 - 1 + num_of_bytes) >> 9;
+ inode->i_blocks = (512 - 1 + fattr->cf_bytes) >> 9;
}
spin_unlock(&inode->i_lock);
+
+ cifs_set_ops(inode, fattr->cf_flags & CIFS_FATTR_DFS_REFERRAL);
}
+/* Fill a cifs_fattr struct with info from FILE_UNIX_BASIC_INFO. */
+void
+cifs_unix_basic_to_fattr(struct cifs_fattr *fattr, FILE_UNIX_BASIC_INFO *info,
+ struct cifs_sb_info *cifs_sb)
+{
+ memset(fattr, 0, sizeof(*fattr));
+ fattr->cf_uniqueid = le64_to_cpu(info->UniqueId);
+ fattr->cf_bytes = le64_to_cpu(info->NumOfBytes);
+ fattr->cf_eof = le64_to_cpu(info->EndOfFile);
+
+ fattr->cf_atime = cifs_NTtimeToUnix(info->LastAccessTime);
+ fattr->cf_mtime = cifs_NTtimeToUnix(info->LastModificationTime);
+ fattr->cf_ctime = cifs_NTtimeToUnix(info->LastStatusChange);
+ fattr->cf_mode = le64_to_cpu(info->Permissions);
+
+ /*
+ * Since we set the inode type below we need to mask off
+ * to avoid strange results if bits set above.
+ */
+ fattr->cf_mode &= ~S_IFMT;
+ switch (le32_to_cpu(info->Type)) {
+ case UNIX_FILE:
+ fattr->cf_mode |= S_IFREG;
+ fattr->cf_dtype = DT_REG;
+ break;
+ case UNIX_SYMLINK:
+ fattr->cf_mode |= S_IFLNK;
+ fattr->cf_dtype = DT_LNK;
+ break;
+ case UNIX_DIR:
+ fattr->cf_mode |= S_IFDIR;
+ fattr->cf_dtype = DT_DIR;
+ break;
+ case UNIX_CHARDEV:
+ fattr->cf_mode |= S_IFCHR;
+ fattr->cf_dtype = DT_CHR;
+ fattr->cf_rdev = MKDEV(le64_to_cpu(info->DevMajor),
+ le64_to_cpu(info->DevMinor) & MINORMASK);
+ break;
+ case UNIX_BLOCKDEV:
+ fattr->cf_mode |= S_IFBLK;
+ fattr->cf_dtype = DT_BLK;
+ fattr->cf_rdev = MKDEV(le64_to_cpu(info->DevMajor),
+ le64_to_cpu(info->DevMinor) & MINORMASK);
+ break;
+ case UNIX_FIFO:
+ fattr->cf_mode |= S_IFIFO;
+ fattr->cf_dtype = DT_FIFO;
+ break;
+ case UNIX_SOCKET:
+ fattr->cf_mode |= S_IFSOCK;
+ fattr->cf_dtype = DT_SOCK;
+ break;
+ default:
+ /* safest to call it a file if we do not know */
+ fattr->cf_mode |= S_IFREG;
+ fattr->cf_dtype = DT_REG;
+ cFYI(1, ("unknown type %d", le32_to_cpu(info->Type)));
+ break;
+ }
+
+ if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_OVERR_UID)
+ fattr->cf_uid = cifs_sb->mnt_uid;
+ else
+ fattr->cf_uid = le64_to_cpu(info->Uid);
+
+ if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_OVERR_GID)
+ fattr->cf_gid = cifs_sb->mnt_gid;
+ else
+ fattr->cf_gid = le64_to_cpu(info->Gid);
+
+ fattr->cf_nlink = le64_to_cpu(info->Nlinks);
+}
/*
- * Needed to setup inode data for the directory which is the
- * junction to the new submount (ie to setup the fake directory
- * which represents a DFS referral)
- */
-static void fill_fake_finddataunix(FILE_UNIX_BASIC_INFO *pfnd_dat,
- struct super_block *sb)
-{
- struct inode *pinode = NULL;
-
- memset(pfnd_dat, 0, sizeof(FILE_UNIX_BASIC_INFO));
-
-/* __le64 pfnd_dat->EndOfFile = cpu_to_le64(0);
- __le64 pfnd_dat->NumOfBytes = cpu_to_le64(0);
- __u64 UniqueId = 0; */
- pfnd_dat->LastStatusChange =
- cpu_to_le64(cifs_UnixTimeToNT(CURRENT_TIME));
- pfnd_dat->LastAccessTime =
- cpu_to_le64(cifs_UnixTimeToNT(CURRENT_TIME));
- pfnd_dat->LastModificationTime =
- cpu_to_le64(cifs_UnixTimeToNT(CURRENT_TIME));
- pfnd_dat->Type = cpu_to_le32(UNIX_DIR);
- pfnd_dat->Permissions = cpu_to_le64(S_IXUGO | S_IRWXU);
- pfnd_dat->Nlinks = cpu_to_le64(2);
- if (sb->s_root)
- pinode = sb->s_root->d_inode;
- if (pinode == NULL)
- return;
-
- /* fill in default values for the remaining based on root
- inode since we can not query the server for this inode info */
- pfnd_dat->DevMajor = cpu_to_le64(MAJOR(pinode->i_rdev));
- pfnd_dat->DevMinor = cpu_to_le64(MINOR(pinode->i_rdev));
- pfnd_dat->Uid = cpu_to_le64(pinode->i_uid);
- pfnd_dat->Gid = cpu_to_le64(pinode->i_gid);
-}
-
-/**
- * cifs_new inode - create new inode, initialize, and hash it
- * @sb - pointer to superblock
- * @inum - if valid pointer and serverino is enabled, replace i_ino with val
+ * Fill a cifs_fattr struct with fake inode info.
*
- * Create a new inode, initialize it for CIFS and hash it. Returns the new
- * inode or NULL if one couldn't be allocated.
- *
- * If the share isn't mounted with "serverino" or inum is a NULL pointer then
- * we'll just use the inode number assigned by new_inode(). Note that this can
- * mean i_ino collisions since the i_ino assigned by new_inode is not
- * guaranteed to be unique.
+ * Needed to setup cifs_fattr data for the directory which is the
+ * junction to the new submount (ie to setup the fake directory
+ * which represents a DFS referral).
*/
-struct inode *
-cifs_new_inode(struct super_block *sb, __u64 *inum)
+void
+cifs_create_dfs_fattr(struct cifs_fattr *fattr, struct super_block *sb)
{
- struct inode *inode;
+ struct cifs_sb_info *cifs_sb = CIFS_SB(sb);
- inode = new_inode(sb);
- if (inode == NULL)
- return NULL;
+ cFYI(1, ("creating fake fattr for DFS referral"));
- /*
- * BB: Is i_ino == 0 legal? Here, we assume that it is. If it isn't we
- * stop passing inum as ptr. Are there sanity checks we can use to
- * ensure that the server is really filling in that field? Also,
- * if serverino is disabled, perhaps we should be using iunique()?
- */
- if (inum && (CIFS_SB(sb)->mnt_cifs_flags & CIFS_MOUNT_SERVER_INUM))
- inode->i_ino = (unsigned long) *inum;
-
- /*
- * must set this here instead of cifs_alloc_inode since VFS will
- * clobber i_flags
- */
- if (sb->s_flags & MS_NOATIME)
- inode->i_flags |= S_NOATIME | S_NOCMTIME;
-
- insert_inode_hash(inode);
-
- return inode;
+ memset(fattr, 0, sizeof(*fattr));
+ fattr->cf_mode = S_IFDIR | S_IXUGO | S_IRWXU;
+ fattr->cf_uid = cifs_sb->mnt_uid;
+ fattr->cf_gid = cifs_sb->mnt_gid;
+ fattr->cf_atime = CURRENT_TIME;
+ fattr->cf_ctime = CURRENT_TIME;
+ fattr->cf_mtime = CURRENT_TIME;
+ fattr->cf_nlink = 2;
+ fattr->cf_flags |= CIFS_FATTR_DFS_REFERRAL;
}
int cifs_get_inode_info_unix(struct inode **pinode,
- const unsigned char *full_path, struct super_block *sb, int xid)
+ const unsigned char *full_path,
+ struct super_block *sb, int xid)
{
- int rc = 0;
+ int rc;
FILE_UNIX_BASIC_INFO find_data;
- struct cifsTconInfo *pTcon;
- struct inode *inode;
+ struct cifs_fattr fattr;
+ struct cifsTconInfo *tcon;
struct cifs_sb_info *cifs_sb = CIFS_SB(sb);
- bool is_dfs_referral = false;
- struct cifsInodeInfo *cifsInfo;
- __u64 num_of_bytes;
- __u64 end_of_file;
- pTcon = cifs_sb->tcon;
+ tcon = cifs_sb->tcon;
cFYI(1, ("Getting info on %s", full_path));
/* could have done a find first instead but this returns more info */
- rc = CIFSSMBUnixQPathInfo(xid, pTcon, full_path, &find_data,
+ rc = CIFSSMBUnixQPathInfo(xid, tcon, full_path, &find_data,
cifs_sb->local_nls, cifs_sb->mnt_cifs_flags &
CIFS_MOUNT_MAP_SPECIAL_CHR);
- if (rc == -EREMOTE && !is_dfs_referral) {
- is_dfs_referral = true;
- cFYI(DBG2, ("DFS ref"));
- /* for DFS, server does not give us real inode data */
- fill_fake_finddataunix(&find_data, sb);
+
+ if (!rc) {
+ cifs_unix_basic_to_fattr(&fattr, &find_data, cifs_sb);
+ } else if (rc == -EREMOTE) {
+ cifs_create_dfs_fattr(&fattr, sb);
rc = 0;
- } else if (rc)
- goto cgiiu_exit;
-
- num_of_bytes = le64_to_cpu(find_data.NumOfBytes);
- end_of_file = le64_to_cpu(find_data.EndOfFile);
-
- /* get new inode */
- if (*pinode == NULL) {
- __u64 unique_id = le64_to_cpu(find_data.UniqueId);
- *pinode = cifs_new_inode(sb, &unique_id);
- if (*pinode == NULL) {
- rc = -ENOMEM;
- goto cgiiu_exit;
- }
+ } else {
+ return rc;
}
- inode = *pinode;
- cifsInfo = CIFS_I(inode);
+ if (*pinode == NULL) {
+ /* get new inode */
+ *pinode = cifs_iget(sb, &fattr);
+ if (!*pinode)
+ rc = -ENOMEM;
+ } else {
+ /* we already have inode, update it */
+ cifs_fattr_to_inode(*pinode, &fattr);
+ }
- cFYI(1, ("Old time %ld", cifsInfo->time));
- cifsInfo->time = jiffies;
- cFYI(1, ("New time %ld", cifsInfo->time));
- /* this is ok to set on every inode revalidate */
- atomic_set(&cifsInfo->inUse, 1);
-
- cifs_unix_info_to_inode(inode, &find_data, 0);
-
- if (num_of_bytes < end_of_file)
- cFYI(1, ("allocation size less than end of file"));
- cFYI(1, ("Size %ld and blocks %llu",
- (unsigned long) inode->i_size,
- (unsigned long long)inode->i_blocks));
-
- cifs_set_ops(inode, is_dfs_referral);
-cgiiu_exit:
return rc;
}
-static int decode_sfu_inode(struct inode *inode, __u64 size,
- const unsigned char *path,
- struct cifs_sb_info *cifs_sb, int xid)
+static int
+cifs_sfu_type(struct cifs_fattr *fattr, const unsigned char *path,
+ struct cifs_sb_info *cifs_sb, int xid)
{
int rc;
int oplock = 0;
@@ -321,10 +284,15 @@
pbuf = buf;
- if (size == 0) {
- inode->i_mode |= S_IFIFO;
+ fattr->cf_mode &= ~S_IFMT;
+
+ if (fattr->cf_eof == 0) {
+ fattr->cf_mode |= S_IFIFO;
+ fattr->cf_dtype = DT_FIFO;
return 0;
- } else if (size < 8) {
+ } else if (fattr->cf_eof < 8) {
+ fattr->cf_mode |= S_IFREG;
+ fattr->cf_dtype = DT_REG;
return -EINVAL; /* EOPNOTSUPP? */
}
@@ -336,42 +304,46 @@
if (rc == 0) {
int buf_type = CIFS_NO_BUFFER;
/* Read header */
- rc = CIFSSMBRead(xid, pTcon,
- netfid,
+ rc = CIFSSMBRead(xid, pTcon, netfid,
24 /* length */, 0 /* offset */,
&bytes_read, &pbuf, &buf_type);
if ((rc == 0) && (bytes_read >= 8)) {
if (memcmp("IntxBLK", pbuf, 8) == 0) {
cFYI(1, ("Block device"));
- inode->i_mode |= S_IFBLK;
+ fattr->cf_mode |= S_IFBLK;
+ fattr->cf_dtype = DT_BLK;
if (bytes_read == 24) {
/* we have enough to decode dev num */
__u64 mjr; /* major */
__u64 mnr; /* minor */
mjr = le64_to_cpu(*(__le64 *)(pbuf+8));
mnr = le64_to_cpu(*(__le64 *)(pbuf+16));
- inode->i_rdev = MKDEV(mjr, mnr);
+ fattr->cf_rdev = MKDEV(mjr, mnr);
}
} else if (memcmp("IntxCHR", pbuf, 8) == 0) {
cFYI(1, ("Char device"));
- inode->i_mode |= S_IFCHR;
+ fattr->cf_mode |= S_IFCHR;
+ fattr->cf_dtype = DT_CHR;
if (bytes_read == 24) {
/* we have enough to decode dev num */
__u64 mjr; /* major */
__u64 mnr; /* minor */
mjr = le64_to_cpu(*(__le64 *)(pbuf+8));
mnr = le64_to_cpu(*(__le64 *)(pbuf+16));
- inode->i_rdev = MKDEV(mjr, mnr);
+ fattr->cf_rdev = MKDEV(mjr, mnr);
}
} else if (memcmp("IntxLNK", pbuf, 7) == 0) {
cFYI(1, ("Symlink"));
- inode->i_mode |= S_IFLNK;
+ fattr->cf_mode |= S_IFLNK;
+ fattr->cf_dtype = DT_LNK;
} else {
- inode->i_mode |= S_IFREG; /* file? */
+ fattr->cf_mode |= S_IFREG; /* file? */
+ fattr->cf_dtype = DT_REG;
rc = -EOPNOTSUPP;
}
} else {
- inode->i_mode |= S_IFREG; /* then it is a file */
+ fattr->cf_mode |= S_IFREG; /* then it is a file */
+ fattr->cf_dtype = DT_REG;
rc = -EOPNOTSUPP; /* or some unknown SFU type */
}
CIFSSMBClose(xid, pTcon, netfid);
@@ -381,9 +353,13 @@
#define SFBITS_MASK (S_ISVTX | S_ISGID | S_ISUID) /* SETFILEBITS valid bits */
-static int get_sfu_mode(struct inode *inode,
- const unsigned char *path,
- struct cifs_sb_info *cifs_sb, int xid)
+/*
+ * Fetch mode bits as provided by SFU.
+ *
+ * FIXME: Doesn't this clobber the type bit we got from cifs_sfu_type ?
+ */
+static int cifs_sfu_mode(struct cifs_fattr *fattr, const unsigned char *path,
+ struct cifs_sb_info *cifs_sb, int xid)
{
#ifdef CONFIG_CIFS_XATTR
ssize_t rc;
@@ -391,68 +367,80 @@
__u32 mode;
rc = CIFSSMBQueryEA(xid, cifs_sb->tcon, path, "SETFILEBITS",
- ea_value, 4 /* size of buf */, cifs_sb->local_nls,
- cifs_sb->mnt_cifs_flags & CIFS_MOUNT_MAP_SPECIAL_CHR);
+ ea_value, 4 /* size of buf */, cifs_sb->local_nls,
+ cifs_sb->mnt_cifs_flags &
+ CIFS_MOUNT_MAP_SPECIAL_CHR);
if (rc < 0)
return (int)rc;
else if (rc > 3) {
mode = le32_to_cpu(*((__le32 *)ea_value));
- inode->i_mode &= ~SFBITS_MASK;
- cFYI(1, ("special bits 0%o org mode 0%o", mode, inode->i_mode));
- inode->i_mode = (mode & SFBITS_MASK) | inode->i_mode;
+ fattr->cf_mode &= ~SFBITS_MASK;
+ cFYI(1, ("special bits 0%o org mode 0%o", mode,
+ fattr->cf_mode));
+ fattr->cf_mode = (mode & SFBITS_MASK) | fattr->cf_mode;
cFYI(1, ("special mode bits 0%o", mode));
- return 0;
- } else {
- return 0;
}
+
+ return 0;
#else
return -EOPNOTSUPP;
#endif
}
-/*
- * Needed to setup inode data for the directory which is the
- * junction to the new submount (ie to setup the fake directory
- * which represents a DFS referral)
- */
-static void fill_fake_finddata(FILE_ALL_INFO *pfnd_dat,
- struct super_block *sb)
+/* Fill a cifs_fattr struct with info from FILE_ALL_INFO */
+void
+cifs_all_info_to_fattr(struct cifs_fattr *fattr, FILE_ALL_INFO *info,
+ struct cifs_sb_info *cifs_sb, bool adjust_tz)
{
- memset(pfnd_dat, 0, sizeof(FILE_ALL_INFO));
+ memset(fattr, 0, sizeof(*fattr));
+ fattr->cf_cifsattrs = le32_to_cpu(info->Attributes);
+ if (info->DeletePending)
+ fattr->cf_flags |= CIFS_FATTR_DELETE_PENDING;
-/* __le64 pfnd_dat->AllocationSize = cpu_to_le64(0);
- __le64 pfnd_dat->EndOfFile = cpu_to_le64(0);
- __u8 pfnd_dat->DeletePending = 0;
- __u8 pfnd_data->Directory = 0;
- __le32 pfnd_dat->EASize = 0;
- __u64 pfnd_dat->IndexNumber = 0;
- __u64 pfnd_dat->IndexNumber1 = 0; */
- pfnd_dat->CreationTime =
- cpu_to_le64(cifs_UnixTimeToNT(CURRENT_TIME));
- pfnd_dat->LastAccessTime =
- cpu_to_le64(cifs_UnixTimeToNT(CURRENT_TIME));
- pfnd_dat->LastWriteTime =
- cpu_to_le64(cifs_UnixTimeToNT(CURRENT_TIME));
- pfnd_dat->ChangeTime =
- cpu_to_le64(cifs_UnixTimeToNT(CURRENT_TIME));
- pfnd_dat->Attributes = cpu_to_le32(ATTR_DIRECTORY);
- pfnd_dat->NumberOfLinks = cpu_to_le32(2);
+ if (info->LastAccessTime)
+ fattr->cf_atime = cifs_NTtimeToUnix(info->LastAccessTime);
+ else
+ fattr->cf_atime = CURRENT_TIME;
+
+ fattr->cf_ctime = cifs_NTtimeToUnix(info->ChangeTime);
+ fattr->cf_mtime = cifs_NTtimeToUnix(info->LastWriteTime);
+
+ if (adjust_tz) {
+ fattr->cf_ctime.tv_sec += cifs_sb->tcon->ses->server->timeAdj;
+ fattr->cf_mtime.tv_sec += cifs_sb->tcon->ses->server->timeAdj;
+ }
+
+ fattr->cf_eof = le64_to_cpu(info->EndOfFile);
+ fattr->cf_bytes = le64_to_cpu(info->AllocationSize);
+
+ if (fattr->cf_cifsattrs & ATTR_DIRECTORY) {
+ fattr->cf_mode = S_IFDIR | cifs_sb->mnt_dir_mode;
+ fattr->cf_dtype = DT_DIR;
+ } else {
+ fattr->cf_mode = S_IFREG | cifs_sb->mnt_file_mode;
+ fattr->cf_dtype = DT_REG;
+
+ /* clear write bits if ATTR_READONLY is set */
+ if (fattr->cf_cifsattrs & ATTR_READONLY)
+ fattr->cf_mode &= ~(S_IWUGO);
+ }
+
+ fattr->cf_nlink = le32_to_cpu(info->NumberOfLinks);
+
+ fattr->cf_uid = cifs_sb->mnt_uid;
+ fattr->cf_gid = cifs_sb->mnt_gid;
}
int cifs_get_inode_info(struct inode **pinode,
const unsigned char *full_path, FILE_ALL_INFO *pfindData,
struct super_block *sb, int xid, const __u16 *pfid)
{
- int rc = 0;
- __u32 attr;
- struct cifsInodeInfo *cifsInfo;
+ int rc = 0, tmprc;
struct cifsTconInfo *pTcon;
- struct inode *inode;
struct cifs_sb_info *cifs_sb = CIFS_SB(sb);
char *buf = NULL;
bool adjustTZ = false;
- bool is_dfs_referral = false;
- umode_t default_mode;
+ struct cifs_fattr fattr;
pTcon = cifs_sb->tcon;
cFYI(1, ("Getting info on %s", full_path));
@@ -487,164 +475,83 @@
adjustTZ = true;
}
}
- /* dump_mem("\nQPathInfo return data",&findData, sizeof(findData)); */
- if (rc == -EREMOTE) {
- is_dfs_referral = true;
- fill_fake_finddata(pfindData, sb);
+
+ if (!rc) {
+ cifs_all_info_to_fattr(&fattr, (FILE_ALL_INFO *) pfindData,
+ cifs_sb, adjustTZ);
+ } else if (rc == -EREMOTE) {
+ cifs_create_dfs_fattr(&fattr, sb);
rc = 0;
- } else if (rc)
+ } else {
goto cgii_exit;
+ }
- attr = le32_to_cpu(pfindData->Attributes);
-
- /* get new inode */
+ /*
+ * If an inode wasn't passed in, then get the inode number
+ *
+ * Is an i_ino of zero legal? Can we use that to check if the server
+ * supports returning inode numbers? Are there other sanity checks we
+ * can use to ensure that the server is really filling in that field?
+ *
+ * We can not use the IndexNumber field by default from Windows or
+ * Samba (in ALL_INFO buf) but we can request it explicitly. The SNIA
+ * CIFS spec claims that this value is unique within the scope of a
+ * share, and the windows docs hint that it's actually unique
+ * per-machine.
+ *
+ * There may be higher info levels that work but are there Windows
+ * server or network appliances for which IndexNumber field is not
+ * guaranteed unique?
+ */
if (*pinode == NULL) {
- __u64 inode_num;
- __u64 *pinum = &inode_num;
-
- /* Is an i_ino of zero legal? Can we use that to check
- if the server supports returning inode numbers? Are
- there other sanity checks we can use to ensure that
- the server is really filling in that field? */
-
- /* We can not use the IndexNumber field by default from
- Windows or Samba (in ALL_INFO buf) but we can request
- it explicitly. It may not be unique presumably if
- the server has multiple devices mounted under one share */
-
- /* There may be higher info levels that work but are
- there Windows server or network appliances for which
- IndexNumber field is not guaranteed unique? */
-
if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_SERVER_INUM) {
int rc1 = 0;
rc1 = CIFSGetSrvInodeNumber(xid, pTcon,
- full_path, pinum,
+ full_path, &fattr.cf_uniqueid,
cifs_sb->local_nls,
cifs_sb->mnt_cifs_flags &
CIFS_MOUNT_MAP_SPECIAL_CHR);
if (rc1) {
- cFYI(1, ("GetSrvInodeNum rc %d", rc1));
- pinum = NULL;
/* BB EOPNOSUPP disable SERVER_INUM? */
+ cFYI(1, ("GetSrvInodeNum rc %d", rc1));
+ fattr.cf_uniqueid = iunique(sb, ROOT_I);
}
} else {
- pinum = NULL;
+ fattr.cf_uniqueid = iunique(sb, ROOT_I);
}
-
- *pinode = cifs_new_inode(sb, pinum);
- if (*pinode == NULL) {
- rc = -ENOMEM;
- goto cgii_exit;
- }
- }
- inode = *pinode;
- cifsInfo = CIFS_I(inode);
- cifsInfo->cifsAttrs = attr;
- cifsInfo->delete_pending = pfindData->DeletePending ? true : false;
- cFYI(1, ("Old time %ld", cifsInfo->time));
- cifsInfo->time = jiffies;
- cFYI(1, ("New time %ld", cifsInfo->time));
-
- /* blksize needs to be multiple of two. So safer to default to
- blksize and blkbits set in superblock so 2**blkbits and blksize
- will match rather than setting to:
- (pTcon->ses->server->maxBuf - MAX_CIFS_HDR_SIZE) & 0xFFFFFE00;*/
-
- /* Linux can not store file creation time so ignore it */
- if (pfindData->LastAccessTime)
- inode->i_atime = cifs_NTtimeToUnix(pfindData->LastAccessTime);
- else /* do not need to use current_fs_time - time not stored */
- inode->i_atime = CURRENT_TIME;
- inode->i_mtime = cifs_NTtimeToUnix(pfindData->LastWriteTime);
- inode->i_ctime = cifs_NTtimeToUnix(pfindData->ChangeTime);
- cFYI(DBG2, ("Attributes came in as 0x%x", attr));
- if (adjustTZ && (pTcon->ses) && (pTcon->ses->server)) {
- inode->i_ctime.tv_sec += pTcon->ses->server->timeAdj;
- inode->i_mtime.tv_sec += pTcon->ses->server->timeAdj;
- }
-
- /* get default inode mode */
- if (attr & ATTR_DIRECTORY)
- default_mode = cifs_sb->mnt_dir_mode;
- else
- default_mode = cifs_sb->mnt_file_mode;
-
- /* set permission bits */
- if (atomic_read(&cifsInfo->inUse) == 0 ||
- (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_DYNPERM) == 0)
- inode->i_mode = default_mode;
- else {
- /* just reenable write bits if !ATTR_READONLY */
- if ((inode->i_mode & S_IWUGO) == 0 &&
- (attr & ATTR_READONLY) == 0)
- inode->i_mode |= (S_IWUGO & default_mode);
-
- inode->i_mode &= ~S_IFMT;
- }
- /* clear write bits if ATTR_READONLY is set */
- if (attr & ATTR_READONLY)
- inode->i_mode &= ~S_IWUGO;
-
- /* set inode type */
- if ((attr & ATTR_SYSTEM) &&
- (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_UNX_EMUL)) {
- /* no need to fix endianness on 0 */
- if (pfindData->EndOfFile == 0)
- inode->i_mode |= S_IFIFO;
- else if (decode_sfu_inode(inode,
- le64_to_cpu(pfindData->EndOfFile),
- full_path, cifs_sb, xid))
- cFYI(1, ("unknown SFU file type\n"));
} else {
- if (attr & ATTR_DIRECTORY)
- inode->i_mode |= S_IFDIR;
- else
- inode->i_mode |= S_IFREG;
+ fattr.cf_uniqueid = CIFS_I(*pinode)->uniqueid;
}
- cifsInfo->server_eof = le64_to_cpu(pfindData->EndOfFile);
- spin_lock(&inode->i_lock);
- if (is_size_safe_to_change(cifsInfo, cifsInfo->server_eof)) {
- /* can not safely shrink the file size here if the
- client is writing to it due to potential races */
- i_size_write(inode, cifsInfo->server_eof);
-
- /* 512 bytes (2**9) is the fake blocksize that must be
- used for this calculation */
- inode->i_blocks = (512 - 1 + le64_to_cpu(
- pfindData->AllocationSize)) >> 9;
+ /* query for SFU type info if supported and needed */
+ if (fattr.cf_cifsattrs & ATTR_SYSTEM &&
+ cifs_sb->mnt_cifs_flags & CIFS_MOUNT_UNX_EMUL) {
+ tmprc = cifs_sfu_type(&fattr, full_path, cifs_sb, xid);
+ if (tmprc)
+ cFYI(1, ("cifs_sfu_type failed: %d", tmprc));
}
- spin_unlock(&inode->i_lock);
- inode->i_nlink = le32_to_cpu(pfindData->NumberOfLinks);
-
- /* BB fill in uid and gid here? with help from winbind?
- or retrieve from NTFS stream extended attribute */
#ifdef CONFIG_CIFS_EXPERIMENTAL
/* fill in 0777 bits from ACL */
if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_CIFS_ACL) {
cFYI(1, ("Getting mode bits from ACL"));
- acl_to_uid_mode(cifs_sb, inode, full_path, pfid);
+ cifs_acl_to_fattr(cifs_sb, &fattr, *pinode, full_path, pfid);
}
#endif
- if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_UNX_EMUL) {
- /* fill in remaining high mode bits e.g. SUID, VTX */
- get_sfu_mode(inode, full_path, cifs_sb, xid);
- } else if (atomic_read(&cifsInfo->inUse) == 0) {
- inode->i_uid = cifs_sb->mnt_uid;
- inode->i_gid = cifs_sb->mnt_gid;
- /* set so we do not keep refreshing these fields with
- bad data after user has changed them in memory */
- atomic_set(&cifsInfo->inUse, 1);
+
+ /* fill in remaining high mode bits e.g. SUID, VTX */
+ if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_UNX_EMUL)
+ cifs_sfu_mode(&fattr, full_path, cifs_sb, xid);
+
+ if (!*pinode) {
+ *pinode = cifs_iget(sb, &fattr);
+ if (!*pinode)
+ rc = -ENOMEM;
+ } else {
+ cifs_fattr_to_inode(*pinode, &fattr);
}
- cifs_set_ops(inode, is_dfs_referral);
-
-
-
-
cgii_exit:
kfree(buf);
return rc;
@@ -695,33 +602,78 @@
return full_path;
}
+static int
+cifs_find_inode(struct inode *inode, void *opaque)
+{
+ struct cifs_fattr *fattr = (struct cifs_fattr *) opaque;
+
+ if (CIFS_I(inode)->uniqueid != fattr->cf_uniqueid)
+ return 0;
+
+ return 1;
+}
+
+static int
+cifs_init_inode(struct inode *inode, void *opaque)
+{
+ struct cifs_fattr *fattr = (struct cifs_fattr *) opaque;
+
+ CIFS_I(inode)->uniqueid = fattr->cf_uniqueid;
+ return 0;
+}
+
+/* Given fattrs, get a corresponding inode */
+struct inode *
+cifs_iget(struct super_block *sb, struct cifs_fattr *fattr)
+{
+ unsigned long hash;
+ struct inode *inode;
+
+ cFYI(1, ("looking for uniqueid=%llu", fattr->cf_uniqueid));
+
+ /* hash down to 32-bits on 32-bit arch */
+ hash = cifs_uniqueid_to_ino_t(fattr->cf_uniqueid);
+
+ inode = iget5_locked(sb, hash, cifs_find_inode, cifs_init_inode, fattr);
+
+ /* we have fattrs in hand, update the inode */
+ if (inode) {
+ cifs_fattr_to_inode(inode, fattr);
+ if (sb->s_flags & MS_NOATIME)
+ inode->i_flags |= S_NOATIME | S_NOCMTIME;
+ if (inode->i_state & I_NEW) {
+ inode->i_ino = hash;
+ unlock_new_inode(inode);
+ }
+ }
+
+ return inode;
+}
+
/* gets root inode */
struct inode *cifs_root_iget(struct super_block *sb, unsigned long ino)
{
int xid;
struct cifs_sb_info *cifs_sb;
- struct inode *inode;
+ struct inode *inode = NULL;
long rc;
char *full_path;
- inode = iget_locked(sb, ino);
- if (!inode)
- return ERR_PTR(-ENOMEM);
- if (!(inode->i_state & I_NEW))
- return inode;
-
- cifs_sb = CIFS_SB(inode->i_sb);
+ cifs_sb = CIFS_SB(sb);
full_path = cifs_build_path_to_root(cifs_sb);
if (full_path == NULL)
return ERR_PTR(-ENOMEM);
xid = GetXid();
if (cifs_sb->tcon->unix_ext)
- rc = cifs_get_inode_info_unix(&inode, full_path, inode->i_sb,
- xid);
+ rc = cifs_get_inode_info_unix(&inode, full_path, sb, xid);
else
- rc = cifs_get_inode_info(&inode, full_path, NULL, inode->i_sb,
+ rc = cifs_get_inode_info(&inode, full_path, NULL, sb,
xid, NULL);
+
+ if (!inode)
+ return ERR_PTR(-ENOMEM);
+
if (rc && cifs_sb->tcon->ipc) {
cFYI(1, ("ipc connection - fake read inode"));
inode->i_mode |= S_IFDIR;
@@ -737,7 +689,6 @@
return ERR_PTR(rc);
}
- unlock_new_inode(inode);
kfree(full_path);
/* can not call macro FreeXid here since in a void func
@@ -988,8 +939,9 @@
* sb->s_vfs_rename_mutex here */
full_path = build_path_from_dentry(dentry);
if (full_path == NULL) {
+ rc = -ENOMEM;
FreeXid(xid);
- return -ENOMEM;
+ return rc;
}
if ((tcon->ses->capabilities & CAP_UNIX) &&
@@ -1062,44 +1014,6 @@
return rc;
}
-void posix_fill_in_inode(struct inode *tmp_inode,
- FILE_UNIX_BASIC_INFO *pData, int isNewInode)
-{
- struct cifsInodeInfo *cifsInfo = CIFS_I(tmp_inode);
- loff_t local_size;
- struct timespec local_mtime;
-
- cifsInfo->time = jiffies;
- atomic_inc(&cifsInfo->inUse);
-
- /* save mtime and size */
- local_mtime = tmp_inode->i_mtime;
- local_size = tmp_inode->i_size;
-
- cifs_unix_info_to_inode(tmp_inode, pData, 1);
- cifs_set_ops(tmp_inode, false);
-
- if (!S_ISREG(tmp_inode->i_mode))
- return;
-
- /*
- * No sense invalidating pages for new inode
- * since we we have not started caching
- * readahead file data yet.
- */
- if (isNewInode)
- return;
-
- if (timespec_equal(&tmp_inode->i_mtime, &local_mtime) &&
- (local_size == tmp_inode->i_size)) {
- cFYI(1, ("inode exists but unchanged"));
- } else {
- /* file may have changed on server */
- cFYI(1, ("invalidate inode, readdir detected change"));
- invalidate_remote_inode(tmp_inode);
- }
-}
-
int cifs_mkdir(struct inode *inode, struct dentry *direntry, int mode)
{
int rc = 0, tmprc;
@@ -1108,6 +1022,7 @@
struct cifsTconInfo *pTcon;
char *full_path = NULL;
struct inode *newinode = NULL;
+ struct cifs_fattr fattr;
cFYI(1, ("In cifs_mkdir, mode = 0x%x inode = 0x%p", mode, inode));
@@ -1118,8 +1033,9 @@
full_path = build_path_from_dentry(direntry);
if (full_path == NULL) {
+ rc = -ENOMEM;
FreeXid(xid);
- return -ENOMEM;
+ return rc;
}
if ((pTcon->ses->capabilities & CAP_UNIX) &&
@@ -1146,7 +1062,6 @@
cFYI(1, ("posix mkdir returned 0x%x", rc));
d_drop(direntry);
} else {
- __u64 unique_id;
if (pInfo->Type == cpu_to_le32(-1)) {
/* no return info, go query for it */
kfree(pInfo);
@@ -1160,20 +1075,15 @@
else
direntry->d_op = &cifs_dentry_ops;
- unique_id = le64_to_cpu(pInfo->UniqueId);
- newinode = cifs_new_inode(inode->i_sb, &unique_id);
- if (newinode == NULL) {
+ cifs_unix_basic_to_fattr(&fattr, pInfo, cifs_sb);
+ newinode = cifs_iget(inode->i_sb, &fattr);
+ if (!newinode) {
kfree(pInfo);
goto mkdir_get_info;
}
- newinode->i_nlink = 2;
d_instantiate(direntry, newinode);
- /* we already checked in POSIXCreate whether
- frame was long enough */
- posix_fill_in_inode(direntry->d_inode,
- pInfo, 1 /* NewInode */);
#ifdef CONFIG_CIFS_DEBUG2
cFYI(1, ("instantiated dentry %p %s to inode %p",
direntry, direntry->d_name.name, newinode));
@@ -1236,10 +1146,10 @@
args.uid = NO_CHANGE_64;
args.gid = NO_CHANGE_64;
}
- CIFSSMBUnixSetInfo(xid, pTcon, full_path, &args,
- cifs_sb->local_nls,
- cifs_sb->mnt_cifs_flags &
- CIFS_MOUNT_MAP_SPECIAL_CHR);
+ CIFSSMBUnixSetPathInfo(xid, pTcon, full_path, &args,
+ cifs_sb->local_nls,
+ cifs_sb->mnt_cifs_flags &
+ CIFS_MOUNT_MAP_SPECIAL_CHR);
} else {
if (!(cifs_sb->mnt_cifs_flags & CIFS_MOUNT_CIFS_ACL) &&
(mode & S_IWUGO) == 0) {
@@ -1303,8 +1213,9 @@
full_path = build_path_from_dentry(direntry);
if (full_path == NULL) {
+ rc = -ENOMEM;
FreeXid(xid);
- return -ENOMEM;
+ return rc;
}
rc = CIFSSMBRmDir(xid, pTcon, full_path, cifs_sb->local_nls,
@@ -1508,8 +1419,9 @@
since that would deadlock */
full_path = build_path_from_dentry(direntry);
if (full_path == NULL) {
+ rc = -ENOMEM;
FreeXid(xid);
- return -ENOMEM;
+ return rc;
}
cFYI(1, ("Revalidate: %s inode 0x%p count %d dentry: 0x%p d_time %ld "
"jiffies %ld", full_path, direntry->d_inode,
@@ -1618,6 +1530,7 @@
if (!err) {
generic_fillattr(dentry->d_inode, stat);
stat->blksize = CIFS_MAX_MSGSIZE;
+ stat->ino = CIFS_I(dentry->d_inode)->uniqueid;
}
return err;
}
@@ -1782,6 +1695,7 @@
struct cifs_sb_info *cifs_sb = CIFS_SB(inode->i_sb);
struct cifsTconInfo *pTcon = cifs_sb->tcon;
struct cifs_unix_set_info_args *args = NULL;
+ struct cifsFileInfo *open_file;
cFYI(1, ("setattr_unix on file %s attrs->ia_valid=0x%x",
direntry->d_name.name, attrs->ia_valid));
@@ -1868,10 +1782,18 @@
args->ctime = NO_CHANGE_64;
args->device = 0;
- rc = CIFSSMBUnixSetInfo(xid, pTcon, full_path, args,
- cifs_sb->local_nls,
- cifs_sb->mnt_cifs_flags &
- CIFS_MOUNT_MAP_SPECIAL_CHR);
+ open_file = find_writable_file(cifsInode);
+ if (open_file) {
+ u16 nfid = open_file->netfid;
+ u32 npid = open_file->pid;
+ rc = CIFSSMBUnixSetFileInfo(xid, pTcon, args, nfid, npid);
+ atomic_dec(&open_file->wrtPending);
+ } else {
+ rc = CIFSSMBUnixSetPathInfo(xid, pTcon, full_path, args,
+ cifs_sb->local_nls,
+ cifs_sb->mnt_cifs_flags &
+ CIFS_MOUNT_MAP_SPECIAL_CHR);
+ }
if (!rc)
rc = inode_setattr(inode, attrs);
@@ -1911,8 +1833,9 @@
full_path = build_path_from_dentry(direntry);
if (full_path == NULL) {
+ rc = -ENOMEM;
FreeXid(xid);
- return -ENOMEM;
+ return rc;
}
/*
diff --git a/fs/cifs/link.c b/fs/cifs/link.c
index cd83c53..fc1e048 100644
--- a/fs/cifs/link.c
+++ b/fs/cifs/link.c
@@ -172,8 +172,9 @@
full_path = build_path_from_dentry(direntry);
if (full_path == NULL) {
+ rc = -ENOMEM;
FreeXid(xid);
- return -ENOMEM;
+ return rc;
}
cFYI(1, ("Full path: %s", full_path));
diff --git a/fs/cifs/netmisc.c b/fs/cifs/netmisc.c
index 32d6baa..bd6d689 100644
--- a/fs/cifs/netmisc.c
+++ b/fs/cifs/netmisc.c
@@ -133,10 +133,12 @@
{0, 0}
};
-/* Convert string containing dotted ip address to binary form */
-/* returns 0 if invalid address */
-
-int
+/*
+ * Convert a string containing text IPv4 or IPv6 address to binary form.
+ *
+ * Returns 0 on failure.
+ */
+static int
cifs_inet_pton(const int address_family, const char *cp, void *dst)
{
int ret = 0;
@@ -153,6 +155,52 @@
return ret;
}
+/*
+ * Try to convert a string to an IPv4 address and then attempt to convert
+ * it to an IPv6 address if that fails. Set the family field if either
+ * succeeds. If it's an IPv6 address and it has a '%' sign in it, try to
+ * treat the part following it as a numeric sin6_scope_id.
+ *
+ * Returns 0 on failure.
+ */
+int
+cifs_convert_address(char *src, void *dst)
+{
+ int rc;
+ char *pct, *endp;
+ struct sockaddr_in *s4 = (struct sockaddr_in *) dst;
+ struct sockaddr_in6 *s6 = (struct sockaddr_in6 *) dst;
+
+ /* IPv4 address */
+ if (cifs_inet_pton(AF_INET, src, &s4->sin_addr.s_addr)) {
+ s4->sin_family = AF_INET;
+ return 1;
+ }
+
+ /* temporarily terminate string */
+ pct = strchr(src, '%');
+ if (pct)
+ *pct = '\0';
+
+ rc = cifs_inet_pton(AF_INET6, src, &s6->sin6_addr.s6_addr);
+
+ /* repair temp termination (if any) and make pct point to scopeid */
+ if (pct)
+ *pct++ = '%';
+
+ if (!rc)
+ return rc;
+
+ s6->sin6_family = AF_INET6;
+ if (pct) {
+ s6->sin6_scope_id = (u32) simple_strtoul(pct, &endp, 0);
+ if (!*pct || *endp)
+ return 0;
+ }
+
+ return rc;
+}
+
/*****************************************************************************
convert a NT status code to a dos class/code
*****************************************************************************/
diff --git a/fs/cifs/readdir.c b/fs/cifs/readdir.c
index 86d0055..f823a4a 100644
--- a/fs/cifs/readdir.c
+++ b/fs/cifs/readdir.c
@@ -63,374 +63,123 @@
}
#endif /* DEBUG2 */
-/* Returns 1 if new inode created, 2 if both dentry and inode were */
-/* Might check in the future if inode number changed so we can rehash inode */
-static int
-construct_dentry(struct qstr *qstring, struct file *file,
- struct inode **ptmp_inode, struct dentry **pnew_dentry,
- __u64 *inum)
+/*
+ * Find the dentry that matches "name". If there isn't one, create one. If it's
+ * a negative dentry or the uniqueid changed, then drop it and recreate it.
+ */
+static struct dentry *
+cifs_readdir_lookup(struct dentry *parent, struct qstr *name,
+ struct cifs_fattr *fattr)
{
- struct dentry *tmp_dentry = NULL;
- struct super_block *sb = file->f_path.dentry->d_sb;
- int rc = 0;
+ struct dentry *dentry, *alias;
+ struct inode *inode;
+ struct super_block *sb = parent->d_inode->i_sb;
- cFYI(1, ("For %s", qstring->name));
+ cFYI(1, ("For %s", name->name));
- qstring->hash = full_name_hash(qstring->name, qstring->len);
- tmp_dentry = d_lookup(file->f_path.dentry, qstring);
- if (tmp_dentry) {
- /* BB: overwrite old name? i.e. tmp_dentry->d_name and
- * tmp_dentry->d_name.len??
- */
- cFYI(0, ("existing dentry with inode 0x%p",
- tmp_dentry->d_inode));
- *ptmp_inode = tmp_dentry->d_inode;
- if (*ptmp_inode == NULL) {
- *ptmp_inode = cifs_new_inode(sb, inum);
- if (*ptmp_inode == NULL)
- return rc;
- rc = 1;
- }
- } else {
- tmp_dentry = d_alloc(file->f_path.dentry, qstring);
- if (tmp_dentry == NULL) {
- cERROR(1, ("Failed allocating dentry"));
- *ptmp_inode = NULL;
- return rc;
- }
-
- if (CIFS_SB(sb)->tcon->nocase)
- tmp_dentry->d_op = &cifs_ci_dentry_ops;
- else
- tmp_dentry->d_op = &cifs_dentry_ops;
-
- *ptmp_inode = cifs_new_inode(sb, inum);
- if (*ptmp_inode == NULL)
- return rc;
- rc = 2;
+ dentry = d_lookup(parent, name);
+ if (dentry) {
+ /* FIXME: check for inode number changes? */
+ if (dentry->d_inode != NULL)
+ return dentry;
+ d_drop(dentry);
+ dput(dentry);
}
- tmp_dentry->d_time = jiffies;
- *pnew_dentry = tmp_dentry;
- return rc;
+ dentry = d_alloc(parent, name);
+ if (dentry == NULL)
+ return NULL;
+
+ inode = cifs_iget(sb, fattr);
+ if (!inode) {
+ dput(dentry);
+ return NULL;
+ }
+
+ if (CIFS_SB(sb)->tcon->nocase)
+ dentry->d_op = &cifs_ci_dentry_ops;
+ else
+ dentry->d_op = &cifs_dentry_ops;
+
+ alias = d_materialise_unique(dentry, inode);
+ if (alias != NULL) {
+ dput(dentry);
+ if (IS_ERR(alias))
+ return NULL;
+ dentry = alias;
+ }
+
+ return dentry;
}
-static void fill_in_inode(struct inode *tmp_inode, int new_buf_type,
- char *buf, unsigned int *pobject_type, int isNewInode)
+static void
+cifs_fill_common_info(struct cifs_fattr *fattr, struct cifs_sb_info *cifs_sb)
{
- loff_t local_size;
- struct timespec local_mtime;
+ fattr->cf_uid = cifs_sb->mnt_uid;
+ fattr->cf_gid = cifs_sb->mnt_gid;
- struct cifsInodeInfo *cifsInfo = CIFS_I(tmp_inode);
- struct cifs_sb_info *cifs_sb = CIFS_SB(tmp_inode->i_sb);
- __u32 attr;
- __u64 allocation_size;
- __u64 end_of_file;
- umode_t default_mode;
-
- /* save mtime and size */
- local_mtime = tmp_inode->i_mtime;
- local_size = tmp_inode->i_size;
-
- if (new_buf_type) {
- FILE_DIRECTORY_INFO *pfindData = (FILE_DIRECTORY_INFO *)buf;
-
- attr = le32_to_cpu(pfindData->ExtFileAttributes);
- allocation_size = le64_to_cpu(pfindData->AllocationSize);
- end_of_file = le64_to_cpu(pfindData->EndOfFile);
- tmp_inode->i_atime =
- cifs_NTtimeToUnix(pfindData->LastAccessTime);
- tmp_inode->i_mtime =
- cifs_NTtimeToUnix(pfindData->LastWriteTime);
- tmp_inode->i_ctime =
- cifs_NTtimeToUnix(pfindData->ChangeTime);
- } else { /* legacy, OS2 and DOS style */
- int offset = cifs_sb->tcon->ses->server->timeAdj;
- FIND_FILE_STANDARD_INFO *pfindData =
- (FIND_FILE_STANDARD_INFO *)buf;
-
- tmp_inode->i_mtime = cnvrtDosUnixTm(pfindData->LastWriteDate,
- pfindData->LastWriteTime,
- offset);
- tmp_inode->i_atime = cnvrtDosUnixTm(pfindData->LastAccessDate,
- pfindData->LastAccessTime,
- offset);
- tmp_inode->i_ctime = cnvrtDosUnixTm(pfindData->LastWriteDate,
- pfindData->LastWriteTime,
- offset);
- attr = le16_to_cpu(pfindData->Attributes);
- allocation_size = le32_to_cpu(pfindData->AllocationSize);
- end_of_file = le32_to_cpu(pfindData->DataSize);
+ if (fattr->cf_cifsattrs & ATTR_DIRECTORY) {
+ fattr->cf_mode = S_IFDIR | cifs_sb->mnt_dir_mode;
+ fattr->cf_dtype = DT_DIR;
+ } else {
+ fattr->cf_mode = S_IFREG | cifs_sb->mnt_file_mode;
+ fattr->cf_dtype = DT_REG;
}
- /* Linux can not store file creation time unfortunately so ignore it */
+ if (fattr->cf_cifsattrs & ATTR_READONLY)
+ fattr->cf_mode &= ~S_IWUGO;
- cifsInfo->cifsAttrs = attr;
-#ifdef CONFIG_CIFS_EXPERIMENTAL
- if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_CIFS_ACL) {
- /* get more accurate mode via ACL - so force inode refresh */
- cifsInfo->time = 0;
- } else
-#endif /* CONFIG_CIFS_EXPERIMENTAL */
- cifsInfo->time = jiffies;
-
- /* treat dos attribute of read-only as read-only mode bit e.g. 555? */
- /* 2767 perms - indicate mandatory locking */
- /* BB fill in uid and gid here? with help from winbind?
- or retrieve from NTFS stream extended attribute */
- if (atomic_read(&cifsInfo->inUse) == 0) {
- tmp_inode->i_uid = cifs_sb->mnt_uid;
- tmp_inode->i_gid = cifs_sb->mnt_gid;
- }
-
- if (attr & ATTR_DIRECTORY)
- default_mode = cifs_sb->mnt_dir_mode;
- else
- default_mode = cifs_sb->mnt_file_mode;
-
- /* set initial permissions */
- if ((atomic_read(&cifsInfo->inUse) == 0) ||
- (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_DYNPERM) == 0)
- tmp_inode->i_mode = default_mode;
- else {
- /* just reenable write bits if !ATTR_READONLY */
- if ((tmp_inode->i_mode & S_IWUGO) == 0 &&
- (attr & ATTR_READONLY) == 0)
- tmp_inode->i_mode |= (S_IWUGO & default_mode);
-
- tmp_inode->i_mode &= ~S_IFMT;
- }
-
- /* clear write bits if ATTR_READONLY is set */
- if (attr & ATTR_READONLY)
- tmp_inode->i_mode &= ~S_IWUGO;
-
- /* set inode type */
- if ((attr & ATTR_SYSTEM) &&
- (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_UNX_EMUL)) {
- if (end_of_file == 0) {
- tmp_inode->i_mode |= S_IFIFO;
- *pobject_type = DT_FIFO;
+ if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_UNX_EMUL &&
+ fattr->cf_cifsattrs & ATTR_SYSTEM) {
+ if (fattr->cf_eof == 0) {
+ fattr->cf_mode &= ~S_IFMT;
+ fattr->cf_mode |= S_IFIFO;
+ fattr->cf_dtype = DT_FIFO;
} else {
/*
- * trying to get the type can be slow, so just call
- * this a regular file for now, and mark for reval
+ * trying to get the type and mode via SFU can be slow,
+ * so just call those regular files for now, and mark
+ * for reval
*/
- tmp_inode->i_mode |= S_IFREG;
- *pobject_type = DT_REG;
- cifsInfo->time = 0;
+ fattr->cf_flags |= CIFS_FATTR_NEED_REVAL;
}
- } else {
- if (attr & ATTR_DIRECTORY) {
- tmp_inode->i_mode |= S_IFDIR;
- *pobject_type = DT_DIR;
- } else {
- tmp_inode->i_mode |= S_IFREG;
- *pobject_type = DT_REG;
- }
- }
-
- /* can not fill in nlink here as in qpathinfo version and Unx search */
- if (atomic_read(&cifsInfo->inUse) == 0)
- atomic_set(&cifsInfo->inUse, 1);
-
- cifsInfo->server_eof = end_of_file;
- spin_lock(&tmp_inode->i_lock);
- if (is_size_safe_to_change(cifsInfo, end_of_file)) {
- /* can not safely change the file size here if the
- client is writing to it due to potential races */
- i_size_write(tmp_inode, end_of_file);
-
- /* 512 bytes (2**9) is the fake blocksize that must be used */
- /* for this calculation, even though the reported blocksize is larger */
- tmp_inode->i_blocks = (512 - 1 + allocation_size) >> 9;
- }
- spin_unlock(&tmp_inode->i_lock);
-
- if (allocation_size < end_of_file)
- cFYI(1, ("May be sparse file, allocation less than file size"));
- cFYI(1, ("File Size %ld and blocks %llu",
- (unsigned long)tmp_inode->i_size,
- (unsigned long long)tmp_inode->i_blocks));
- if (S_ISREG(tmp_inode->i_mode)) {
- cFYI(1, ("File inode"));
- tmp_inode->i_op = &cifs_file_inode_ops;
- if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_DIRECT_IO) {
- if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_NO_BRL)
- tmp_inode->i_fop = &cifs_file_direct_nobrl_ops;
- else
- tmp_inode->i_fop = &cifs_file_direct_ops;
- } else if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_NO_BRL)
- tmp_inode->i_fop = &cifs_file_nobrl_ops;
- else
- tmp_inode->i_fop = &cifs_file_ops;
-
- if ((cifs_sb->tcon) && (cifs_sb->tcon->ses) &&
- (cifs_sb->tcon->ses->server->maxBuf <
- PAGE_CACHE_SIZE + MAX_CIFS_HDR_SIZE))
- tmp_inode->i_data.a_ops = &cifs_addr_ops_smallbuf;
- else
- tmp_inode->i_data.a_ops = &cifs_addr_ops;
-
- if (isNewInode)
- return; /* No sense invalidating pages for new inode
- since have not started caching readahead file
- data yet */
-
- if (timespec_equal(&tmp_inode->i_mtime, &local_mtime) &&
- (local_size == tmp_inode->i_size)) {
- cFYI(1, ("inode exists but unchanged"));
- } else {
- /* file may have changed on server */
- cFYI(1, ("invalidate inode, readdir detected change"));
- invalidate_remote_inode(tmp_inode);
- }
- } else if (S_ISDIR(tmp_inode->i_mode)) {
- cFYI(1, ("Directory inode"));
- tmp_inode->i_op = &cifs_dir_inode_ops;
- tmp_inode->i_fop = &cifs_dir_ops;
- } else if (S_ISLNK(tmp_inode->i_mode)) {
- cFYI(1, ("Symbolic Link inode"));
- tmp_inode->i_op = &cifs_symlink_inode_ops;
- } else {
- cFYI(1, ("Init special inode"));
- init_special_inode(tmp_inode, tmp_inode->i_mode,
- tmp_inode->i_rdev);
}
}
-static void unix_fill_in_inode(struct inode *tmp_inode,
- FILE_UNIX_INFO *pfindData, unsigned int *pobject_type, int isNewInode)
+void
+cifs_dir_info_to_fattr(struct cifs_fattr *fattr, FILE_DIRECTORY_INFO *info,
+ struct cifs_sb_info *cifs_sb)
{
- loff_t local_size;
- struct timespec local_mtime;
+ memset(fattr, 0, sizeof(*fattr));
+ fattr->cf_cifsattrs = le32_to_cpu(info->ExtFileAttributes);
+ fattr->cf_eof = le64_to_cpu(info->EndOfFile);
+ fattr->cf_bytes = le64_to_cpu(info->AllocationSize);
+ fattr->cf_atime = cifs_NTtimeToUnix(info->LastAccessTime);
+ fattr->cf_ctime = cifs_NTtimeToUnix(info->ChangeTime);
+ fattr->cf_mtime = cifs_NTtimeToUnix(info->LastWriteTime);
- struct cifsInodeInfo *cifsInfo = CIFS_I(tmp_inode);
- struct cifs_sb_info *cifs_sb = CIFS_SB(tmp_inode->i_sb);
+ cifs_fill_common_info(fattr, cifs_sb);
+}
- __u32 type = le32_to_cpu(pfindData->Type);
- __u64 num_of_bytes = le64_to_cpu(pfindData->NumOfBytes);
- __u64 end_of_file = le64_to_cpu(pfindData->EndOfFile);
- cifsInfo->time = jiffies;
- atomic_inc(&cifsInfo->inUse);
+void
+cifs_std_info_to_fattr(struct cifs_fattr *fattr, FIND_FILE_STANDARD_INFO *info,
+ struct cifs_sb_info *cifs_sb)
+{
+ int offset = cifs_sb->tcon->ses->server->timeAdj;
- /* save mtime and size */
- local_mtime = tmp_inode->i_mtime;
- local_size = tmp_inode->i_size;
+ memset(fattr, 0, sizeof(*fattr));
+ fattr->cf_atime = cnvrtDosUnixTm(info->LastAccessDate,
+ info->LastAccessTime, offset);
+ fattr->cf_ctime = cnvrtDosUnixTm(info->LastWriteDate,
+ info->LastWriteTime, offset);
+ fattr->cf_mtime = cnvrtDosUnixTm(info->LastWriteDate,
+ info->LastWriteTime, offset);
- tmp_inode->i_atime =
- cifs_NTtimeToUnix(pfindData->LastAccessTime);
- tmp_inode->i_mtime =
- cifs_NTtimeToUnix(pfindData->LastModificationTime);
- tmp_inode->i_ctime =
- cifs_NTtimeToUnix(pfindData->LastStatusChange);
+ fattr->cf_cifsattrs = le16_to_cpu(info->Attributes);
+ fattr->cf_bytes = le32_to_cpu(info->AllocationSize);
+ fattr->cf_eof = le32_to_cpu(info->DataSize);
- tmp_inode->i_mode = le64_to_cpu(pfindData->Permissions);
- /* since we set the inode type below we need to mask off type
- to avoid strange results if bits above were corrupt */
- tmp_inode->i_mode &= ~S_IFMT;
- if (type == UNIX_FILE) {
- *pobject_type = DT_REG;
- tmp_inode->i_mode |= S_IFREG;
- } else if (type == UNIX_SYMLINK) {
- *pobject_type = DT_LNK;
- tmp_inode->i_mode |= S_IFLNK;
- } else if (type == UNIX_DIR) {
- *pobject_type = DT_DIR;
- tmp_inode->i_mode |= S_IFDIR;
- } else if (type == UNIX_CHARDEV) {
- *pobject_type = DT_CHR;
- tmp_inode->i_mode |= S_IFCHR;
- tmp_inode->i_rdev = MKDEV(le64_to_cpu(pfindData->DevMajor),
- le64_to_cpu(pfindData->DevMinor) & MINORMASK);
- } else if (type == UNIX_BLOCKDEV) {
- *pobject_type = DT_BLK;
- tmp_inode->i_mode |= S_IFBLK;
- tmp_inode->i_rdev = MKDEV(le64_to_cpu(pfindData->DevMajor),
- le64_to_cpu(pfindData->DevMinor) & MINORMASK);
- } else if (type == UNIX_FIFO) {
- *pobject_type = DT_FIFO;
- tmp_inode->i_mode |= S_IFIFO;
- } else if (type == UNIX_SOCKET) {
- *pobject_type = DT_SOCK;
- tmp_inode->i_mode |= S_IFSOCK;
- } else {
- /* safest to just call it a file */
- *pobject_type = DT_REG;
- tmp_inode->i_mode |= S_IFREG;
- cFYI(1, ("unknown inode type %d", type));
- }
-
- if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_OVERR_UID)
- tmp_inode->i_uid = cifs_sb->mnt_uid;
- else
- tmp_inode->i_uid = le64_to_cpu(pfindData->Uid);
- if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_OVERR_GID)
- tmp_inode->i_gid = cifs_sb->mnt_gid;
- else
- tmp_inode->i_gid = le64_to_cpu(pfindData->Gid);
- tmp_inode->i_nlink = le64_to_cpu(pfindData->Nlinks);
-
- cifsInfo->server_eof = end_of_file;
- spin_lock(&tmp_inode->i_lock);
- if (is_size_safe_to_change(cifsInfo, end_of_file)) {
- /* can not safely change the file size here if the
- client is writing to it due to potential races */
- i_size_write(tmp_inode, end_of_file);
-
- /* 512 bytes (2**9) is the fake blocksize that must be used */
- /* for this calculation, not the real blocksize */
- tmp_inode->i_blocks = (512 - 1 + num_of_bytes) >> 9;
- }
- spin_unlock(&tmp_inode->i_lock);
-
- if (S_ISREG(tmp_inode->i_mode)) {
- cFYI(1, ("File inode"));
- tmp_inode->i_op = &cifs_file_inode_ops;
-
- if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_DIRECT_IO) {
- if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_NO_BRL)
- tmp_inode->i_fop = &cifs_file_direct_nobrl_ops;
- else
- tmp_inode->i_fop = &cifs_file_direct_ops;
- } else if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_NO_BRL)
- tmp_inode->i_fop = &cifs_file_nobrl_ops;
- else
- tmp_inode->i_fop = &cifs_file_ops;
-
- if ((cifs_sb->tcon) && (cifs_sb->tcon->ses) &&
- (cifs_sb->tcon->ses->server->maxBuf <
- PAGE_CACHE_SIZE + MAX_CIFS_HDR_SIZE))
- tmp_inode->i_data.a_ops = &cifs_addr_ops_smallbuf;
- else
- tmp_inode->i_data.a_ops = &cifs_addr_ops;
-
- if (isNewInode)
- return; /* No sense invalidating pages for new inode
- since we have not started caching readahead
- file data for it yet */
-
- if (timespec_equal(&tmp_inode->i_mtime, &local_mtime) &&
- (local_size == tmp_inode->i_size)) {
- cFYI(1, ("inode exists but unchanged"));
- } else {
- /* file may have changed on server */
- cFYI(1, ("invalidate inode, readdir detected change"));
- invalidate_remote_inode(tmp_inode);
- }
- } else if (S_ISDIR(tmp_inode->i_mode)) {
- cFYI(1, ("Directory inode"));
- tmp_inode->i_op = &cifs_dir_inode_ops;
- tmp_inode->i_fop = &cifs_dir_ops;
- } else if (S_ISLNK(tmp_inode->i_mode)) {
- cFYI(1, ("Symbolic Link inode"));
- tmp_inode->i_op = &cifs_symlink_inode_ops;
-/* tmp_inode->i_fop = *//* do not need to set to anything */
- } else {
- cFYI(1, ("Special inode"));
- init_special_inode(tmp_inode, tmp_inode->i_mode,
- tmp_inode->i_rdev);
- }
+ cifs_fill_common_info(fattr, cifs_sb);
}
/* BB eventually need to add the following helper function to
@@ -872,7 +621,7 @@
len = strnlen(filename, PATH_MAX);
}
- *pinum = le64_to_cpu(pFindData->UniqueId);
+ *pinum = le64_to_cpu(pFindData->basic.UniqueId);
} else if (level == SMB_FIND_FILE_DIRECTORY_INFO) {
FILE_DIRECTORY_INFO *pFindData =
(FILE_DIRECTORY_INFO *)current_entry;
@@ -932,11 +681,12 @@
int rc = 0;
struct qstr qstring;
struct cifsFileInfo *pCifsF;
- unsigned int obj_type;
- __u64 inum;
+ u64 inum;
+ ino_t ino;
+ struct super_block *sb;
struct cifs_sb_info *cifs_sb;
- struct inode *tmp_inode;
struct dentry *tmp_dentry;
+ struct cifs_fattr fattr;
/* get filename and len into qstring */
/* get dentry */
@@ -954,60 +704,53 @@
if (rc != 0)
return 0;
- cifs_sb = CIFS_SB(file->f_path.dentry->d_sb);
+ sb = file->f_path.dentry->d_sb;
+ cifs_sb = CIFS_SB(sb);
qstring.name = scratch_buf;
rc = cifs_get_name_from_search_buf(&qstring, pfindEntry,
pCifsF->srch_inf.info_level,
pCifsF->srch_inf.unicode, cifs_sb,
- max_len,
- &inum /* returned */);
+ max_len, &inum /* returned */);
if (rc)
return rc;
- /* only these two infolevels return valid inode numbers */
- if (pCifsF->srch_inf.info_level == SMB_FIND_FILE_UNIX ||
- pCifsF->srch_inf.info_level == SMB_FIND_FILE_ID_FULL_DIR_INFO)
- rc = construct_dentry(&qstring, file, &tmp_inode, &tmp_dentry,
- &inum);
- else
- rc = construct_dentry(&qstring, file, &tmp_inode, &tmp_dentry,
- NULL);
-
- if ((tmp_inode == NULL) || (tmp_dentry == NULL))
- return -ENOMEM;
-
- /* we pass in rc below, indicating whether it is a new inode,
- so we can figure out whether to invalidate the inode cached
- data if the file has changed */
if (pCifsF->srch_inf.info_level == SMB_FIND_FILE_UNIX)
- unix_fill_in_inode(tmp_inode,
- (FILE_UNIX_INFO *)pfindEntry,
- &obj_type, rc);
+ cifs_unix_basic_to_fattr(&fattr,
+ &((FILE_UNIX_INFO *) pfindEntry)->basic,
+ cifs_sb);
else if (pCifsF->srch_inf.info_level == SMB_FIND_FILE_INFO_STANDARD)
- fill_in_inode(tmp_inode, 0 /* old level 1 buffer type */,
- pfindEntry, &obj_type, rc);
+ cifs_std_info_to_fattr(&fattr, (FIND_FILE_STANDARD_INFO *)
+ pfindEntry, cifs_sb);
else
- fill_in_inode(tmp_inode, 1 /* NT */, pfindEntry, &obj_type, rc);
+ cifs_dir_info_to_fattr(&fattr, (FILE_DIRECTORY_INFO *)
+ pfindEntry, cifs_sb);
- if (rc) /* new inode - needs to be tied to dentry */ {
- d_instantiate(tmp_dentry, tmp_inode);
- if (rc == 2)
- d_rehash(tmp_dentry);
- }
+ /* FIXME: make _to_fattr functions fill this out */
+ if (pCifsF->srch_inf.info_level == SMB_FIND_FILE_ID_FULL_DIR_INFO)
+ fattr.cf_uniqueid = inum;
+ else
+ fattr.cf_uniqueid = iunique(sb, ROOT_I);
+ ino = cifs_uniqueid_to_ino_t(fattr.cf_uniqueid);
+ tmp_dentry = cifs_readdir_lookup(file->f_dentry, &qstring, &fattr);
rc = filldir(direntry, qstring.name, qstring.len, file->f_pos,
- tmp_inode->i_ino, obj_type);
+ ino, fattr.cf_dtype);
+
+ /*
+ * we can not return filldir errors to the caller since they are
+ * "normal" when the stat blocksize is too small - we return remapped
+ * error instead
+ *
+ * FIXME: This looks bogus. filldir returns -EOVERFLOW in the above
+ * case already. Why should we be clobbering other errors from it?
+ */
if (rc) {
cFYI(1, ("filldir rc = %d", rc));
- /* we can not return filldir errors to the caller
- since they are "normal" when the stat blocksize
- is too small - we return remapped error instead */
rc = -EOVERFLOW;
}
-
dput(tmp_dentry);
return rc;
}
diff --git a/fs/cifs/sess.c b/fs/cifs/sess.c
index 897a052..7085a62 100644
--- a/fs/cifs/sess.c
+++ b/fs/cifs/sess.c
@@ -802,7 +802,7 @@
#endif /* CONFIG_CIFS_UPCALL */
} else {
#ifdef CONFIG_CIFS_EXPERIMENTAL
- if ((experimEnabled > 1) && (type == RawNTLMSSP)) {
+ if (type == RawNTLMSSP) {
if ((pSMB->req.hdr.Flags2 & SMBFLG2_UNICODE) == 0) {
cERROR(1, ("NTLMSSP requires Unicode support"));
rc = -ENOSYS;
diff --git a/fs/cifs/xattr.c b/fs/cifs/xattr.c
index e9527ee..a75afa3 100644
--- a/fs/cifs/xattr.c
+++ b/fs/cifs/xattr.c
@@ -64,8 +64,9 @@
full_path = build_path_from_dentry(direntry);
if (full_path == NULL) {
+ rc = -ENOMEM;
FreeXid(xid);
- return -ENOMEM;
+ return rc;
}
if (ea_name == NULL) {
cFYI(1, ("Null xattr names not supported"));
@@ -118,8 +119,9 @@
full_path = build_path_from_dentry(direntry);
if (full_path == NULL) {
+ rc = -ENOMEM;
FreeXid(xid);
- return -ENOMEM;
+ return rc;
}
/* return dos attributes as pseudo xattr */
/* return alt name if available as pseudo attr */
@@ -225,8 +227,9 @@
full_path = build_path_from_dentry(direntry);
if (full_path == NULL) {
+ rc = -ENOMEM;
FreeXid(xid);
- return -ENOMEM;
+ return rc;
}
/* return dos attributes as pseudo xattr */
/* return alt name if available as pseudo attr */
@@ -351,8 +354,9 @@
full_path = build_path_from_dentry(direntry);
if (full_path == NULL) {
+ rc = -ENOMEM;
FreeXid(xid);
- return -ENOMEM;
+ return rc;
}
/* return dos attributes as pseudo xattr */
/* return alt name if available as pseudo attr */
diff --git a/fs/compat.c b/fs/compat.c
index cdd51a3..94502da 100644
--- a/fs/compat.c
+++ b/fs/compat.c
@@ -32,7 +32,6 @@
#include <linux/smb_mount.h>
#include <linux/ncp_mount.h>
#include <linux/nfs4_mount.h>
-#include <linux/smp_lock.h>
#include <linux/syscalls.h>
#include <linux/ctype.h>
#include <linux/module.h>
@@ -1486,8 +1485,8 @@
if (!bprm)
goto out_files;
- retval = mutex_lock_interruptible(¤t->cred_guard_mutex);
- if (retval < 0)
+ retval = -ERESTARTNOINTR;
+ if (mutex_lock_interruptible(¤t->cred_guard_mutex))
goto out_free;
current->in_execve = 1;
diff --git a/fs/compat_ioctl.c b/fs/compat_ioctl.c
index 626c748..f28f070 100644
--- a/fs/compat_ioctl.c
+++ b/fs/compat_ioctl.c
@@ -19,6 +19,7 @@
#include <linux/compiler.h>
#include <linux/sched.h>
#include <linux/smp.h>
+#include <linux/smp_lock.h>
#include <linux/ioctl.h>
#include <linux/if.h>
#include <linux/if_bridge.h>
diff --git a/fs/eventfd.c b/fs/eventfd.c
index 3f0e197..31d12de8 100644
--- a/fs/eventfd.c
+++ b/fs/eventfd.c
@@ -14,35 +14,44 @@
#include <linux/list.h>
#include <linux/spinlock.h>
#include <linux/anon_inodes.h>
-#include <linux/eventfd.h>
#include <linux/syscalls.h>
#include <linux/module.h>
+#include <linux/kref.h>
+#include <linux/eventfd.h>
struct eventfd_ctx {
+ struct kref kref;
wait_queue_head_t wqh;
/*
* Every time that a write(2) is performed on an eventfd, the
* value of the __u64 being written is added to "count" and a
* wakeup is performed on "wqh". A read(2) will return the "count"
* value to userspace, and will reset "count" to zero. The kernel
- * size eventfd_signal() also, adds to the "count" counter and
+ * side eventfd_signal() also, adds to the "count" counter and
* issue a wakeup.
*/
__u64 count;
unsigned int flags;
};
-/*
- * Adds "n" to the eventfd counter "count". Returns "n" in case of
- * success, or a value lower then "n" in case of coutner overflow.
- * This function is supposed to be called by the kernel in paths
- * that do not allow sleeping. In this function we allow the counter
- * to reach the ULLONG_MAX value, and we signal this as overflow
- * condition by returining a POLLERR to poll(2).
+/**
+ * eventfd_signal - Adds @n to the eventfd counter.
+ * @ctx: [in] Pointer to the eventfd context.
+ * @n: [in] Value of the counter to be added to the eventfd internal counter.
+ * The value cannot be negative.
+ *
+ * This function is supposed to be called by the kernel in paths that do not
+ * allow sleeping. In this function we allow the counter to reach the ULLONG_MAX
+ * value, and we signal this as overflow condition by returining a POLLERR
+ * to poll(2).
+ *
+ * Returns @n in case of success, a non-negative number lower than @n in case
+ * of overflow, or the following error codes:
+ *
+ * -EINVAL : The value of @n is negative.
*/
-int eventfd_signal(struct file *file, int n)
+int eventfd_signal(struct eventfd_ctx *ctx, int n)
{
- struct eventfd_ctx *ctx = file->private_data;
unsigned long flags;
if (n < 0)
@@ -59,9 +68,45 @@
}
EXPORT_SYMBOL_GPL(eventfd_signal);
+static void eventfd_free(struct kref *kref)
+{
+ struct eventfd_ctx *ctx = container_of(kref, struct eventfd_ctx, kref);
+
+ kfree(ctx);
+}
+
+/**
+ * eventfd_ctx_get - Acquires a reference to the internal eventfd context.
+ * @ctx: [in] Pointer to the eventfd context.
+ *
+ * Returns: In case of success, returns a pointer to the eventfd context.
+ */
+struct eventfd_ctx *eventfd_ctx_get(struct eventfd_ctx *ctx)
+{
+ kref_get(&ctx->kref);
+ return ctx;
+}
+EXPORT_SYMBOL_GPL(eventfd_ctx_get);
+
+/**
+ * eventfd_ctx_put - Releases a reference to the internal eventfd context.
+ * @ctx: [in] Pointer to eventfd context.
+ *
+ * The eventfd context reference must have been previously acquired either
+ * with eventfd_ctx_get() or eventfd_ctx_fdget()).
+ */
+void eventfd_ctx_put(struct eventfd_ctx *ctx)
+{
+ kref_put(&ctx->kref, eventfd_free);
+}
+EXPORT_SYMBOL_GPL(eventfd_ctx_put);
+
static int eventfd_release(struct inode *inode, struct file *file)
{
- kfree(file->private_data);
+ struct eventfd_ctx *ctx = file->private_data;
+
+ wake_up_poll(&ctx->wqh, POLLHUP);
+ eventfd_ctx_put(ctx);
return 0;
}
@@ -185,6 +230,16 @@
.write = eventfd_write,
};
+/**
+ * eventfd_fget - Acquire a reference of an eventfd file descriptor.
+ * @fd: [in] Eventfd file descriptor.
+ *
+ * Returns a pointer to the eventfd file structure in case of success, or the
+ * following error pointer:
+ *
+ * -EBADF : Invalid @fd file descriptor.
+ * -EINVAL : The @fd file descriptor is not an eventfd file.
+ */
struct file *eventfd_fget(int fd)
{
struct file *file;
@@ -201,6 +256,48 @@
}
EXPORT_SYMBOL_GPL(eventfd_fget);
+/**
+ * eventfd_ctx_fdget - Acquires a reference to the internal eventfd context.
+ * @fd: [in] Eventfd file descriptor.
+ *
+ * Returns a pointer to the internal eventfd context, otherwise the error
+ * pointers returned by the following functions:
+ *
+ * eventfd_fget
+ */
+struct eventfd_ctx *eventfd_ctx_fdget(int fd)
+{
+ struct file *file;
+ struct eventfd_ctx *ctx;
+
+ file = eventfd_fget(fd);
+ if (IS_ERR(file))
+ return (struct eventfd_ctx *) file;
+ ctx = eventfd_ctx_get(file->private_data);
+ fput(file);
+
+ return ctx;
+}
+EXPORT_SYMBOL_GPL(eventfd_ctx_fdget);
+
+/**
+ * eventfd_ctx_fileget - Acquires a reference to the internal eventfd context.
+ * @file: [in] Eventfd file pointer.
+ *
+ * Returns a pointer to the internal eventfd context, otherwise the error
+ * pointer:
+ *
+ * -EINVAL : The @fd file descriptor is not an eventfd file.
+ */
+struct eventfd_ctx *eventfd_ctx_fileget(struct file *file)
+{
+ if (file->f_op != &eventfd_fops)
+ return ERR_PTR(-EINVAL);
+
+ return eventfd_ctx_get(file->private_data);
+}
+EXPORT_SYMBOL_GPL(eventfd_ctx_fileget);
+
SYSCALL_DEFINE2(eventfd2, unsigned int, count, int, flags)
{
int fd;
@@ -217,6 +314,7 @@
if (!ctx)
return -ENOMEM;
+ kref_init(&ctx->kref);
init_waitqueue_head(&ctx->wqh);
ctx->count = count;
ctx->flags = flags;
diff --git a/fs/exec.c b/fs/exec.c
index e639957..4a8849e 100644
--- a/fs/exec.c
+++ b/fs/exec.c
@@ -1277,8 +1277,8 @@
if (!bprm)
goto out_files;
- retval = mutex_lock_interruptible(¤t->cred_guard_mutex);
- if (retval < 0)
+ retval = -ERESTARTNOINTR;
+ if (mutex_lock_interruptible(¤t->cred_guard_mutex))
goto out_free;
current->in_execve = 1;
diff --git a/fs/exofs/common.h b/fs/exofs/common.h
index 24667ee..c6718e4 100644
--- a/fs/exofs/common.h
+++ b/fs/exofs/common.h
@@ -2,9 +2,7 @@
* common.h - Common definitions for both Kernel and user-mode utilities
*
* Copyright (C) 2005, 2006
- * Avishay Traeger (avishay@gmail.com) (avishay@il.ibm.com)
- * Copyright (C) 2005, 2006
- * International Business Machines
+ * Avishay Traeger (avishay@gmail.com)
* Copyright (C) 2008, 2009
* Boaz Harrosh <bharrosh@panasas.com>
*
diff --git a/fs/exofs/dir.c b/fs/exofs/dir.c
index 65b0c8c..4cfab1c 100644
--- a/fs/exofs/dir.c
+++ b/fs/exofs/dir.c
@@ -1,8 +1,6 @@
/*
* Copyright (C) 2005, 2006
- * Avishay Traeger (avishay@gmail.com) (avishay@il.ibm.com)
- * Copyright (C) 2005, 2006
- * International Business Machines
+ * Avishay Traeger (avishay@gmail.com)
* Copyright (C) 2008, 2009
* Boaz Harrosh <bharrosh@panasas.com>
*
diff --git a/fs/exofs/exofs.h b/fs/exofs/exofs.h
index 0fd4c785..5ec72e0 100644
--- a/fs/exofs/exofs.h
+++ b/fs/exofs/exofs.h
@@ -1,8 +1,6 @@
/*
* Copyright (C) 2005, 2006
- * Avishay Traeger (avishay@gmail.com) (avishay@il.ibm.com)
- * Copyright (C) 2005, 2006
- * International Business Machines
+ * Avishay Traeger (avishay@gmail.com)
* Copyright (C) 2008, 2009
* Boaz Harrosh <bharrosh@panasas.com>
*
@@ -156,6 +154,9 @@
int exofs_set_link(struct inode *, struct exofs_dir_entry *, struct page *,
struct inode *);
+/* super.c */
+int exofs_sync_fs(struct super_block *sb, int wait);
+
/*********************
* operation vectors *
*********************/
diff --git a/fs/exofs/file.c b/fs/exofs/file.c
index 6ed7fe4..839b9dc 100644
--- a/fs/exofs/file.c
+++ b/fs/exofs/file.c
@@ -1,8 +1,6 @@
/*
* Copyright (C) 2005, 2006
- * Avishay Traeger (avishay@gmail.com) (avishay@il.ibm.com)
- * Copyright (C) 2005, 2006
- * International Business Machines
+ * Avishay Traeger (avishay@gmail.com)
* Copyright (C) 2008, 2009
* Boaz Harrosh <bharrosh@panasas.com>
*
@@ -47,16 +45,23 @@
{
int ret;
struct address_space *mapping = filp->f_mapping;
+ struct inode *inode = dentry->d_inode;
+ struct super_block *sb;
ret = filemap_write_and_wait(mapping);
if (ret)
return ret;
- /*Note: file_fsync below also calles sync_blockdev, which is a no-op
- * for exofs, but other then that it does sync_inode and
- * sync_superblock which is what we need here.
- */
- return file_fsync(filp, dentry, datasync);
+ /* sync the inode attributes */
+ ret = write_inode_now(inode, 1);
+
+ /* This is a good place to write the sb */
+ /* TODO: Sechedule an sb-sync on create */
+ sb = inode->i_sb;
+ if (sb->s_dirt)
+ exofs_sync_fs(sb, 1);
+
+ return ret;
}
static int exofs_flush(struct file *file, fl_owner_t id)
diff --git a/fs/exofs/inode.c b/fs/exofs/inode.c
index 77d0a29..6c10f74 100644
--- a/fs/exofs/inode.c
+++ b/fs/exofs/inode.c
@@ -1,8 +1,6 @@
/*
* Copyright (C) 2005, 2006
- * Avishay Traeger (avishay@gmail.com) (avishay@il.ibm.com)
- * Copyright (C) 2005, 2006
- * International Business Machines
+ * Avishay Traeger (avishay@gmail.com)
* Copyright (C) 2008, 2009
* Boaz Harrosh <bharrosh@panasas.com>
*
@@ -295,6 +293,9 @@
err:
if (!is_sync)
_unlock_pcol_pages(pcol, ret, READ);
+ else /* Pages unlocked by caller in sync mode only free bio */
+ pcol_free(pcol);
+
kfree(pcol_copy);
if (or)
osd_end_request(or);
diff --git a/fs/exofs/namei.c b/fs/exofs/namei.c
index 77fdd76..b7dd0c2 100644
--- a/fs/exofs/namei.c
+++ b/fs/exofs/namei.c
@@ -1,8 +1,6 @@
/*
* Copyright (C) 2005, 2006
- * Avishay Traeger (avishay@gmail.com) (avishay@il.ibm.com)
- * Copyright (C) 2005, 2006
- * International Business Machines
+ * Avishay Traeger (avishay@gmail.com)
* Copyright (C) 2008, 2009
* Boaz Harrosh <bharrosh@panasas.com>
*
diff --git a/fs/exofs/osd.c b/fs/exofs/osd.c
index b3d2ccb..4372542 100644
--- a/fs/exofs/osd.c
+++ b/fs/exofs/osd.c
@@ -1,8 +1,6 @@
/*
* Copyright (C) 2005, 2006
- * Avishay Traeger (avishay@gmail.com) (avishay@il.ibm.com)
- * Copyright (C) 2005, 2006
- * International Business Machines
+ * Avishay Traeger (avishay@gmail.com)
* Copyright (C) 2008, 2009
* Boaz Harrosh <bharrosh@panasas.com>
*
diff --git a/fs/exofs/super.c b/fs/exofs/super.c
index 8216c5b..5ab10c3 100644
--- a/fs/exofs/super.c
+++ b/fs/exofs/super.c
@@ -1,8 +1,6 @@
/*
* Copyright (C) 2005, 2006
- * Avishay Traeger (avishay@gmail.com) (avishay@il.ibm.com)
- * Copyright (C) 2005, 2006
- * International Business Machines
+ * Avishay Traeger (avishay@gmail.com)
* Copyright (C) 2008, 2009
* Boaz Harrosh <bharrosh@panasas.com>
*
@@ -33,6 +31,7 @@
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
+#include <linux/smp_lock.h>
#include <linux/string.h>
#include <linux/parser.h>
#include <linux/vfs.h>
@@ -200,7 +199,7 @@
/*
* Write the superblock to the OSD
*/
-static int exofs_sync_fs(struct super_block *sb, int wait)
+int exofs_sync_fs(struct super_block *sb, int wait)
{
struct exofs_sb_info *sbi;
struct exofs_fscb *fscb;
diff --git a/fs/exofs/symlink.c b/fs/exofs/symlink.c
index 36e2d7b..4dd687c 100644
--- a/fs/exofs/symlink.c
+++ b/fs/exofs/symlink.c
@@ -1,8 +1,6 @@
/*
* Copyright (C) 2005, 2006
- * Avishay Traeger (avishay@gmail.com) (avishay@il.ibm.com)
- * Copyright (C) 2005, 2006
- * International Business Machines
+ * Avishay Traeger (avishay@gmail.com)
* Copyright (C) 2008, 2009
* Boaz Harrosh <bharrosh@panasas.com>
*
diff --git a/fs/ext2/ioctl.c b/fs/ext2/ioctl.c
index 7cb4bad..e743130 100644
--- a/fs/ext2/ioctl.c
+++ b/fs/ext2/ioctl.c
@@ -13,7 +13,6 @@
#include <linux/sched.h>
#include <linux/compat.h>
#include <linux/mount.h>
-#include <linux/smp_lock.h>
#include <asm/current.h>
#include <asm/uaccess.h>
diff --git a/fs/ext2/namei.c b/fs/ext2/namei.c
index 6524eca..e1dedb0 100644
--- a/fs/ext2/namei.c
+++ b/fs/ext2/namei.c
@@ -66,8 +66,16 @@
inode = NULL;
if (ino) {
inode = ext2_iget(dir->i_sb, ino);
- if (IS_ERR(inode))
- return ERR_CAST(inode);
+ if (unlikely(IS_ERR(inode))) {
+ if (PTR_ERR(inode) == -ESTALE) {
+ ext2_error(dir->i_sb, __func__,
+ "deleted inode referenced: %lu",
+ ino);
+ return ERR_PTR(-EIO);
+ } else {
+ return ERR_CAST(inode);
+ }
+ }
}
return d_splice_alias(inode, dentry);
}
diff --git a/fs/ext4/ext4.h b/fs/ext4/ext4.h
index 0ddf7e5..9714db3 100644
--- a/fs/ext4/ext4.h
+++ b/fs/ext4/ext4.h
@@ -93,20 +93,20 @@
struct ext4_allocation_request {
/* target inode for block we're allocating */
struct inode *inode;
- /* logical block in target inode */
- ext4_lblk_t logical;
- /* phys. target (a hint) */
- ext4_fsblk_t goal;
- /* the closest logical allocated block to the left */
- ext4_lblk_t lleft;
- /* phys. block for ^^^ */
- ext4_fsblk_t pleft;
- /* the closest logical allocated block to the right */
- ext4_lblk_t lright;
- /* phys. block for ^^^ */
- ext4_fsblk_t pright;
/* how many blocks we want to allocate */
unsigned int len;
+ /* logical block in target inode */
+ ext4_lblk_t logical;
+ /* the closest logical allocated block to the left */
+ ext4_lblk_t lleft;
+ /* the closest logical allocated block to the right */
+ ext4_lblk_t lright;
+ /* phys. target (a hint) */
+ ext4_fsblk_t goal;
+ /* phys. block for the closest logical allocated block to the left */
+ ext4_fsblk_t pleft;
+ /* phys. block for the closest logical allocated block to the right */
+ ext4_fsblk_t pright;
/* flags. see above EXT4_MB_HINT_* */
unsigned int flags;
};
diff --git a/fs/ext4/ext4_jbd2.c b/fs/ext4/ext4_jbd2.c
index ad13a84..eb27fd0 100644
--- a/fs/ext4/ext4_jbd2.c
+++ b/fs/ext4/ext4_jbd2.c
@@ -43,6 +43,8 @@
ext4_journal_abort_handle(where, __func__, bh,
handle, err);
}
+ else
+ brelse(bh);
return err;
}
@@ -57,6 +59,8 @@
ext4_journal_abort_handle(where, __func__, bh,
handle, err);
}
+ else
+ brelse(bh);
return err;
}
diff --git a/fs/ext4/ext4_jbd2.h b/fs/ext4/ext4_jbd2.h
index be2f426..139fb8c 100644
--- a/fs/ext4/ext4_jbd2.h
+++ b/fs/ext4/ext4_jbd2.h
@@ -131,9 +131,11 @@
int __ext4_journal_get_write_access(const char *where, handle_t *handle,
struct buffer_head *bh);
+/* When called with an invalid handle, this will still do a put on the BH */
int __ext4_journal_forget(const char *where, handle_t *handle,
struct buffer_head *bh);
+/* When called with an invalid handle, this will still do a put on the BH */
int __ext4_journal_revoke(const char *where, handle_t *handle,
ext4_fsblk_t blocknr, struct buffer_head *bh);
@@ -281,10 +283,10 @@
static inline int ext4_should_writeback_data(struct inode *inode)
{
- if (EXT4_JOURNAL(inode) == NULL)
- return 0;
if (!S_ISREG(inode->i_mode))
return 0;
+ if (EXT4_JOURNAL(inode) == NULL)
+ return 1;
if (EXT4_I(inode)->i_flags & EXT4_JOURNAL_DATA_FL)
return 0;
if (test_opt(inode->i_sb, DATA_FLAGS) == EXT4_MOUNT_WRITEBACK_DATA)
diff --git a/fs/ext4/extents.c b/fs/ext4/extents.c
index 50322a0..73ebfb4 100644
--- a/fs/ext4/extents.c
+++ b/fs/ext4/extents.c
@@ -1977,6 +1977,7 @@
*/
/* 1 bitmap, 1 block group descriptor */
ret = 2 + EXT4_META_TRANS_BLOCKS(inode->i_sb);
+ return ret;
}
}
diff --git a/fs/ext4/ialloc.c b/fs/ext4/ialloc.c
index 2f64573..29e6dc7 100644
--- a/fs/ext4/ialloc.c
+++ b/fs/ext4/ialloc.c
@@ -833,7 +833,7 @@
if (!goal)
goal = sbi->s_inode_goal;
- if (goal && goal < le32_to_cpu(sbi->s_es->s_inodes_count)) {
+ if (goal && goal <= le32_to_cpu(sbi->s_es->s_inodes_count)) {
group = (goal - 1) / EXT4_INODES_PER_GROUP(sb);
ino = (goal - 1) % EXT4_INODES_PER_GROUP(sb);
ret2 = 0;
diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c
index 60a26f3..f9c642b 100644
--- a/fs/ext4/inode.c
+++ b/fs/ext4/inode.c
@@ -78,16 +78,14 @@
* but there may still be a record of it in the journal, and that record
* still needs to be revoked.
*
- * If the handle isn't valid we're not journaling so there's nothing to do.
+ * If the handle isn't valid we're not journaling, but we still need to
+ * call into ext4_journal_revoke() to put the buffer head.
*/
int ext4_forget(handle_t *handle, int is_metadata, struct inode *inode,
struct buffer_head *bh, ext4_fsblk_t blocknr)
{
int err;
- if (!ext4_handle_valid(handle))
- return 0;
-
might_sleep();
BUFFER_TRACE(bh, "enter");
@@ -1513,14 +1511,14 @@
* Add inode to orphan list in case we crash before
* truncate finishes
*/
- if (pos + len > inode->i_size)
+ if (pos + len > inode->i_size && ext4_can_truncate(inode))
ext4_orphan_add(handle, inode);
ext4_journal_stop(handle);
if (pos + len > inode->i_size) {
- vmtruncate(inode, inode->i_size);
+ ext4_truncate(inode);
/*
- * If vmtruncate failed early the inode might
+ * If truncate failed early the inode might
* still be on the orphan list; we need to
* make sure the inode is removed from the
* orphan list in that case.
@@ -1614,7 +1612,7 @@
ret2 = ext4_generic_write_end(file, mapping, pos, len, copied,
page, fsdata);
copied = ret2;
- if (pos + len > inode->i_size)
+ if (pos + len > inode->i_size && ext4_can_truncate(inode))
/* if we have allocated more blocks and copied
* less. We will have blocks allocated outside
* inode->i_size. So truncate them
@@ -1628,9 +1626,9 @@
ret = ret2;
if (pos + len > inode->i_size) {
- vmtruncate(inode, inode->i_size);
+ ext4_truncate(inode);
/*
- * If vmtruncate failed early the inode might still be
+ * If truncate failed early the inode might still be
* on the orphan list; we need to make sure the inode
* is removed from the orphan list in that case.
*/
@@ -1655,7 +1653,7 @@
ret2 = ext4_generic_write_end(file, mapping, pos, len, copied,
page, fsdata);
copied = ret2;
- if (pos + len > inode->i_size)
+ if (pos + len > inode->i_size && ext4_can_truncate(inode))
/* if we have allocated more blocks and copied
* less. We will have blocks allocated outside
* inode->i_size. So truncate them
@@ -1670,9 +1668,9 @@
ret = ret2;
if (pos + len > inode->i_size) {
- vmtruncate(inode, inode->i_size);
+ ext4_truncate(inode);
/*
- * If vmtruncate failed early the inode might still be
+ * If truncate failed early the inode might still be
* on the orphan list; we need to make sure the inode
* is removed from the orphan list in that case.
*/
@@ -1722,7 +1720,7 @@
unlock_page(page);
page_cache_release(page);
- if (pos + len > inode->i_size)
+ if (pos + len > inode->i_size && ext4_can_truncate(inode))
/* if we have allocated more blocks and copied
* less. We will have blocks allocated outside
* inode->i_size. So truncate them
@@ -1733,9 +1731,9 @@
if (!ret)
ret = ret2;
if (pos + len > inode->i_size) {
- vmtruncate(inode, inode->i_size);
+ ext4_truncate(inode);
/*
- * If vmtruncate failed early the inode might still be
+ * If truncate failed early the inode might still be
* on the orphan list; we need to make sure the inode
* is removed from the orphan list in that case.
*/
@@ -2305,15 +2303,9 @@
return;
}
-static int ext4_bh_unmapped_or_delay(handle_t *handle, struct buffer_head *bh)
+static int ext4_bh_delay_or_unwritten(handle_t *handle, struct buffer_head *bh)
{
- /*
- * unmapped buffer is possible for holes.
- * delay buffer is possible with delayed allocation.
- * We also need to consider unwritten buffer as unmapped.
- */
- return (!buffer_mapped(bh) || buffer_delay(bh) ||
- buffer_unwritten(bh)) && buffer_dirty(bh);
+ return (buffer_delay(bh) || buffer_unwritten(bh)) && buffer_dirty(bh);
}
/*
@@ -2398,9 +2390,9 @@
* We need to try to allocate
* unmapped blocks in the same page.
* Otherwise we won't make progress
- * with the page in ext4_da_writepage
+ * with the page in ext4_writepage
*/
- if (ext4_bh_unmapped_or_delay(NULL, bh)) {
+ if (ext4_bh_delay_or_unwritten(NULL, bh)) {
mpage_add_bh_to_extent(mpd, logical,
bh->b_size,
bh->b_state);
@@ -2517,7 +2509,6 @@
* so call get_block_wrap with create = 0
*/
ret = ext4_get_blocks(NULL, inode, iblock, max_blocks, bh_result, 0);
- BUG_ON(create && ret == 0);
if (ret > 0) {
bh_result->b_size = (ret << inode->i_blkbits);
ret = 0;
@@ -2525,15 +2516,102 @@
return ret;
}
+static int bget_one(handle_t *handle, struct buffer_head *bh)
+{
+ get_bh(bh);
+ return 0;
+}
+
+static int bput_one(handle_t *handle, struct buffer_head *bh)
+{
+ put_bh(bh);
+ return 0;
+}
+
+static int __ext4_journalled_writepage(struct page *page,
+ struct writeback_control *wbc,
+ unsigned int len)
+{
+ struct address_space *mapping = page->mapping;
+ struct inode *inode = mapping->host;
+ struct buffer_head *page_bufs;
+ handle_t *handle = NULL;
+ int ret = 0;
+ int err;
+
+ page_bufs = page_buffers(page);
+ BUG_ON(!page_bufs);
+ walk_page_buffers(handle, page_bufs, 0, len, NULL, bget_one);
+ /* As soon as we unlock the page, it can go away, but we have
+ * references to buffers so we are safe */
+ unlock_page(page);
+
+ handle = ext4_journal_start(inode, ext4_writepage_trans_blocks(inode));
+ if (IS_ERR(handle)) {
+ ret = PTR_ERR(handle);
+ goto out;
+ }
+
+ ret = walk_page_buffers(handle, page_bufs, 0, len, NULL,
+ do_journal_get_write_access);
+
+ err = walk_page_buffers(handle, page_bufs, 0, len, NULL,
+ write_end_fn);
+ if (ret == 0)
+ ret = err;
+ err = ext4_journal_stop(handle);
+ if (!ret)
+ ret = err;
+
+ walk_page_buffers(handle, page_bufs, 0, len, NULL, bput_one);
+ EXT4_I(inode)->i_state |= EXT4_STATE_JDATA;
+out:
+ return ret;
+}
+
/*
+ * Note that we don't need to start a transaction unless we're journaling data
+ * because we should have holes filled from ext4_page_mkwrite(). We even don't
+ * need to file the inode to the transaction's list in ordered mode because if
+ * we are writing back data added by write(), the inode is already there and if
+ * we are writing back data modified via mmap(), noone guarantees in which
+ * transaction the data will hit the disk. In case we are journaling data, we
+ * cannot start transaction directly because transaction start ranks above page
+ * lock so we have to do some magic.
+ *
* This function can get called via...
* - ext4_da_writepages after taking page lock (have journal handle)
* - journal_submit_inode_data_buffers (no journal handle)
* - shrink_page_list via pdflush (no journal handle)
* - grab_page_cache when doing write_begin (have journal handle)
+ *
+ * We don't do any block allocation in this function. If we have page with
+ * multiple blocks we need to write those buffer_heads that are mapped. This
+ * is important for mmaped based write. So if we do with blocksize 1K
+ * truncate(f, 1024);
+ * a = mmap(f, 0, 4096);
+ * a[0] = 'a';
+ * truncate(f, 4096);
+ * we have in the page first buffer_head mapped via page_mkwrite call back
+ * but other bufer_heads would be unmapped but dirty(dirty done via the
+ * do_wp_page). So writepage should write the first block. If we modify
+ * the mmap area beyond 1024 we will again get a page_fault and the
+ * page_mkwrite callback will do the block allocation and mark the
+ * buffer_heads mapped.
+ *
+ * We redirty the page if we have any buffer_heads that is either delay or
+ * unwritten in the page.
+ *
+ * We can get recursively called as show below.
+ *
+ * ext4_writepage() -> kmalloc() -> __alloc_pages() -> page_launder() ->
+ * ext4_writepage()
+ *
+ * But since we don't do any block allocation we should not deadlock.
+ * Page also have the dirty flag cleared so we don't get recurive page_lock.
*/
-static int ext4_da_writepage(struct page *page,
- struct writeback_control *wbc)
+static int ext4_writepage(struct page *page,
+ struct writeback_control *wbc)
{
int ret = 0;
loff_t size;
@@ -2541,7 +2619,7 @@
struct buffer_head *page_bufs;
struct inode *inode = page->mapping->host;
- trace_ext4_da_writepage(inode, page);
+ trace_ext4_writepage(inode, page);
size = i_size_read(inode);
if (page->index == size >> PAGE_CACHE_SHIFT)
len = size & ~PAGE_CACHE_MASK;
@@ -2551,7 +2629,7 @@
if (page_has_buffers(page)) {
page_bufs = page_buffers(page);
if (walk_page_buffers(NULL, page_bufs, 0, len, NULL,
- ext4_bh_unmapped_or_delay)) {
+ ext4_bh_delay_or_unwritten)) {
/*
* We don't want to do block allocation
* So redirty the page and return
@@ -2578,13 +2656,13 @@
* all are mapped and non delay. We don't want to
* do block allocation here.
*/
- ret = block_prepare_write(page, 0, PAGE_CACHE_SIZE,
+ ret = block_prepare_write(page, 0, len,
noalloc_get_block_write);
if (!ret) {
page_bufs = page_buffers(page);
/* check whether all are mapped and non delay */
if (walk_page_buffers(NULL, page_bufs, 0, len, NULL,
- ext4_bh_unmapped_or_delay)) {
+ ext4_bh_delay_or_unwritten)) {
redirty_page_for_writepage(wbc, page);
unlock_page(page);
return 0;
@@ -2600,7 +2678,16 @@
return 0;
}
/* now mark the buffer_heads as dirty and uptodate */
- block_commit_write(page, 0, PAGE_CACHE_SIZE);
+ block_commit_write(page, 0, len);
+ }
+
+ if (PageChecked(page) && ext4_should_journal_data(inode)) {
+ /*
+ * It's mmapped pagecache. Add buffers and journal it. There
+ * doesn't seem much point in redirtying the page here.
+ */
+ ClearPageChecked(page);
+ return __ext4_journalled_writepage(page, wbc, len);
}
if (test_opt(inode->i_sb, NOBH) && ext4_should_writeback_data(inode))
@@ -2907,7 +2994,7 @@
* i_size_read because we hold i_mutex.
*/
if (pos + len > inode->i_size)
- vmtruncate(inode, inode->i_size);
+ ext4_truncate(inode);
}
if (ret == -ENOSPC && ext4_should_retry_alloc(inode->i_sb, &retries))
@@ -3130,222 +3217,6 @@
return generic_block_bmap(mapping, block, ext4_get_block);
}
-static int bget_one(handle_t *handle, struct buffer_head *bh)
-{
- get_bh(bh);
- return 0;
-}
-
-static int bput_one(handle_t *handle, struct buffer_head *bh)
-{
- put_bh(bh);
- return 0;
-}
-
-/*
- * Note that we don't need to start a transaction unless we're journaling data
- * because we should have holes filled from ext4_page_mkwrite(). We even don't
- * need to file the inode to the transaction's list in ordered mode because if
- * we are writing back data added by write(), the inode is already there and if
- * we are writing back data modified via mmap(), noone guarantees in which
- * transaction the data will hit the disk. In case we are journaling data, we
- * cannot start transaction directly because transaction start ranks above page
- * lock so we have to do some magic.
- *
- * In all journaling modes block_write_full_page() will start the I/O.
- *
- * Problem:
- *
- * ext4_writepage() -> kmalloc() -> __alloc_pages() -> page_launder() ->
- * ext4_writepage()
- *
- * Similar for:
- *
- * ext4_file_write() -> generic_file_write() -> __alloc_pages() -> ...
- *
- * Same applies to ext4_get_block(). We will deadlock on various things like
- * lock_journal and i_data_sem
- *
- * Setting PF_MEMALLOC here doesn't work - too many internal memory
- * allocations fail.
- *
- * 16May01: If we're reentered then journal_current_handle() will be
- * non-zero. We simply *return*.
- *
- * 1 July 2001: @@@ FIXME:
- * In journalled data mode, a data buffer may be metadata against the
- * current transaction. But the same file is part of a shared mapping
- * and someone does a writepage() on it.
- *
- * We will move the buffer onto the async_data list, but *after* it has
- * been dirtied. So there's a small window where we have dirty data on
- * BJ_Metadata.
- *
- * Note that this only applies to the last partial page in the file. The
- * bit which block_write_full_page() uses prepare/commit for. (That's
- * broken code anyway: it's wrong for msync()).
- *
- * It's a rare case: affects the final partial page, for journalled data
- * where the file is subject to bith write() and writepage() in the same
- * transction. To fix it we'll need a custom block_write_full_page().
- * We'll probably need that anyway for journalling writepage() output.
- *
- * We don't honour synchronous mounts for writepage(). That would be
- * disastrous. Any write() or metadata operation will sync the fs for
- * us.
- *
- */
-static int __ext4_normal_writepage(struct page *page,
- struct writeback_control *wbc)
-{
- struct inode *inode = page->mapping->host;
-
- if (test_opt(inode->i_sb, NOBH))
- return nobh_writepage(page, noalloc_get_block_write, wbc);
- else
- return block_write_full_page(page, noalloc_get_block_write,
- wbc);
-}
-
-static int ext4_normal_writepage(struct page *page,
- struct writeback_control *wbc)
-{
- struct inode *inode = page->mapping->host;
- loff_t size = i_size_read(inode);
- loff_t len;
-
- trace_ext4_normal_writepage(inode, page);
- J_ASSERT(PageLocked(page));
- if (page->index == size >> PAGE_CACHE_SHIFT)
- len = size & ~PAGE_CACHE_MASK;
- else
- len = PAGE_CACHE_SIZE;
-
- if (page_has_buffers(page)) {
- /* if page has buffers it should all be mapped
- * and allocated. If there are not buffers attached
- * to the page we know the page is dirty but it lost
- * buffers. That means that at some moment in time
- * after write_begin() / write_end() has been called
- * all buffers have been clean and thus they must have been
- * written at least once. So they are all mapped and we can
- * happily proceed with mapping them and writing the page.
- */
- BUG_ON(walk_page_buffers(NULL, page_buffers(page), 0, len, NULL,
- ext4_bh_unmapped_or_delay));
- }
-
- if (!ext4_journal_current_handle())
- return __ext4_normal_writepage(page, wbc);
-
- redirty_page_for_writepage(wbc, page);
- unlock_page(page);
- return 0;
-}
-
-static int __ext4_journalled_writepage(struct page *page,
- struct writeback_control *wbc)
-{
- struct address_space *mapping = page->mapping;
- struct inode *inode = mapping->host;
- struct buffer_head *page_bufs;
- handle_t *handle = NULL;
- int ret = 0;
- int err;
-
- ret = block_prepare_write(page, 0, PAGE_CACHE_SIZE,
- noalloc_get_block_write);
- if (ret != 0)
- goto out_unlock;
-
- page_bufs = page_buffers(page);
- walk_page_buffers(handle, page_bufs, 0, PAGE_CACHE_SIZE, NULL,
- bget_one);
- /* As soon as we unlock the page, it can go away, but we have
- * references to buffers so we are safe */
- unlock_page(page);
-
- handle = ext4_journal_start(inode, ext4_writepage_trans_blocks(inode));
- if (IS_ERR(handle)) {
- ret = PTR_ERR(handle);
- goto out;
- }
-
- ret = walk_page_buffers(handle, page_bufs, 0,
- PAGE_CACHE_SIZE, NULL, do_journal_get_write_access);
-
- err = walk_page_buffers(handle, page_bufs, 0,
- PAGE_CACHE_SIZE, NULL, write_end_fn);
- if (ret == 0)
- ret = err;
- err = ext4_journal_stop(handle);
- if (!ret)
- ret = err;
-
- walk_page_buffers(handle, page_bufs, 0,
- PAGE_CACHE_SIZE, NULL, bput_one);
- EXT4_I(inode)->i_state |= EXT4_STATE_JDATA;
- goto out;
-
-out_unlock:
- unlock_page(page);
-out:
- return ret;
-}
-
-static int ext4_journalled_writepage(struct page *page,
- struct writeback_control *wbc)
-{
- struct inode *inode = page->mapping->host;
- loff_t size = i_size_read(inode);
- loff_t len;
-
- trace_ext4_journalled_writepage(inode, page);
- J_ASSERT(PageLocked(page));
- if (page->index == size >> PAGE_CACHE_SHIFT)
- len = size & ~PAGE_CACHE_MASK;
- else
- len = PAGE_CACHE_SIZE;
-
- if (page_has_buffers(page)) {
- /* if page has buffers it should all be mapped
- * and allocated. If there are not buffers attached
- * to the page we know the page is dirty but it lost
- * buffers. That means that at some moment in time
- * after write_begin() / write_end() has been called
- * all buffers have been clean and thus they must have been
- * written at least once. So they are all mapped and we can
- * happily proceed with mapping them and writing the page.
- */
- BUG_ON(walk_page_buffers(NULL, page_buffers(page), 0, len, NULL,
- ext4_bh_unmapped_or_delay));
- }
-
- if (ext4_journal_current_handle())
- goto no_write;
-
- if (PageChecked(page)) {
- /*
- * It's mmapped pagecache. Add buffers and journal it. There
- * doesn't seem much point in redirtying the page here.
- */
- ClearPageChecked(page);
- return __ext4_journalled_writepage(page, wbc);
- } else {
- /*
- * It may be a page full of checkpoint-mode buffers. We don't
- * really know unless we go poke around in the buffer_heads.
- * But block_write_full_page will do the right thing.
- */
- return block_write_full_page(page, noalloc_get_block_write,
- wbc);
- }
-no_write:
- redirty_page_for_writepage(wbc, page);
- unlock_page(page);
- return 0;
-}
-
static int ext4_readpage(struct file *file, struct page *page)
{
return mpage_readpage(page, ext4_get_block);
@@ -3492,7 +3363,7 @@
static const struct address_space_operations ext4_ordered_aops = {
.readpage = ext4_readpage,
.readpages = ext4_readpages,
- .writepage = ext4_normal_writepage,
+ .writepage = ext4_writepage,
.sync_page = block_sync_page,
.write_begin = ext4_write_begin,
.write_end = ext4_ordered_write_end,
@@ -3507,7 +3378,7 @@
static const struct address_space_operations ext4_writeback_aops = {
.readpage = ext4_readpage,
.readpages = ext4_readpages,
- .writepage = ext4_normal_writepage,
+ .writepage = ext4_writepage,
.sync_page = block_sync_page,
.write_begin = ext4_write_begin,
.write_end = ext4_writeback_write_end,
@@ -3522,7 +3393,7 @@
static const struct address_space_operations ext4_journalled_aops = {
.readpage = ext4_readpage,
.readpages = ext4_readpages,
- .writepage = ext4_journalled_writepage,
+ .writepage = ext4_writepage,
.sync_page = block_sync_page,
.write_begin = ext4_write_begin,
.write_end = ext4_journalled_write_end,
@@ -3536,7 +3407,7 @@
static const struct address_space_operations ext4_da_aops = {
.readpage = ext4_readpage,
.readpages = ext4_readpages,
- .writepage = ext4_da_writepage,
+ .writepage = ext4_writepage,
.writepages = ext4_da_writepages,
.sync_page = block_sync_page,
.write_begin = ext4_da_write_begin,
@@ -3583,7 +3454,8 @@
struct page *page;
int err = 0;
- page = grab_cache_page(mapping, from >> PAGE_CACHE_SHIFT);
+ page = find_or_create_page(mapping, from >> PAGE_CACHE_SHIFT,
+ mapping_gfp_mask(mapping) & ~__GFP_FS);
if (!page)
return -EINVAL;
diff --git a/fs/ext4/ioctl.c b/fs/ext4/ioctl.c
index bb415408..7050a9c 100644
--- a/fs/ext4/ioctl.c
+++ b/fs/ext4/ioctl.c
@@ -12,7 +12,6 @@
#include <linux/capability.h>
#include <linux/time.h>
#include <linux/compat.h>
-#include <linux/smp_lock.h>
#include <linux/mount.h>
#include <linux/file.h>
#include <asm/uaccess.h>
@@ -192,7 +191,7 @@
case EXT4_IOC_GROUP_EXTEND: {
ext4_fsblk_t n_blocks_count;
struct super_block *sb = inode->i_sb;
- int err, err2;
+ int err, err2=0;
if (!capable(CAP_SYS_RESOURCE))
return -EPERM;
@@ -205,9 +204,11 @@
return err;
err = ext4_group_extend(sb, EXT4_SB(sb)->s_es, n_blocks_count);
- jbd2_journal_lock_updates(EXT4_SB(sb)->s_journal);
- err2 = jbd2_journal_flush(EXT4_SB(sb)->s_journal);
- jbd2_journal_unlock_updates(EXT4_SB(sb)->s_journal);
+ if (EXT4_SB(sb)->s_journal) {
+ jbd2_journal_lock_updates(EXT4_SB(sb)->s_journal);
+ err2 = jbd2_journal_flush(EXT4_SB(sb)->s_journal);
+ jbd2_journal_unlock_updates(EXT4_SB(sb)->s_journal);
+ }
if (err == 0)
err = err2;
mnt_drop_write(filp->f_path.mnt);
@@ -252,7 +253,7 @@
case EXT4_IOC_GROUP_ADD: {
struct ext4_new_group_data input;
struct super_block *sb = inode->i_sb;
- int err, err2;
+ int err, err2=0;
if (!capable(CAP_SYS_RESOURCE))
return -EPERM;
@@ -266,9 +267,11 @@
return err;
err = ext4_group_add(sb, &input);
- jbd2_journal_lock_updates(EXT4_SB(sb)->s_journal);
- err2 = jbd2_journal_flush(EXT4_SB(sb)->s_journal);
- jbd2_journal_unlock_updates(EXT4_SB(sb)->s_journal);
+ if (EXT4_SB(sb)->s_journal) {
+ jbd2_journal_lock_updates(EXT4_SB(sb)->s_journal);
+ err2 = jbd2_journal_flush(EXT4_SB(sb)->s_journal);
+ jbd2_journal_unlock_updates(EXT4_SB(sb)->s_journal);
+ }
if (err == 0)
err = err2;
mnt_drop_write(filp->f_path.mnt);
diff --git a/fs/ext4/mballoc.c b/fs/ext4/mballoc.c
index 519a0a6..cd25846 100644
--- a/fs/ext4/mballoc.c
+++ b/fs/ext4/mballoc.c
@@ -657,7 +657,8 @@
}
}
-static void ext4_mb_generate_buddy(struct super_block *sb,
+static noinline_for_stack
+void ext4_mb_generate_buddy(struct super_block *sb,
void *buddy, void *bitmap, ext4_group_t group)
{
struct ext4_group_info *grp = ext4_get_group_info(sb, group);
@@ -1480,7 +1481,8 @@
ext4_mb_check_limits(ac, e4b, 0);
}
-static int ext4_mb_try_best_found(struct ext4_allocation_context *ac,
+static noinline_for_stack
+int ext4_mb_try_best_found(struct ext4_allocation_context *ac,
struct ext4_buddy *e4b)
{
struct ext4_free_extent ex = ac->ac_b_ex;
@@ -1507,7 +1509,8 @@
return 0;
}
-static int ext4_mb_find_by_goal(struct ext4_allocation_context *ac,
+static noinline_for_stack
+int ext4_mb_find_by_goal(struct ext4_allocation_context *ac,
struct ext4_buddy *e4b)
{
ext4_group_t group = ac->ac_g_ex.fe_group;
@@ -1566,7 +1569,8 @@
* The routine scans buddy structures (not bitmap!) from given order
* to max order and tries to find big enough chunk to satisfy the req
*/
-static void ext4_mb_simple_scan_group(struct ext4_allocation_context *ac,
+static noinline_for_stack
+void ext4_mb_simple_scan_group(struct ext4_allocation_context *ac,
struct ext4_buddy *e4b)
{
struct super_block *sb = ac->ac_sb;
@@ -1609,7 +1613,8 @@
* In order to optimize scanning, caller must pass number of
* free blocks in the group, so the routine can know upper limit.
*/
-static void ext4_mb_complex_scan_group(struct ext4_allocation_context *ac,
+static noinline_for_stack
+void ext4_mb_complex_scan_group(struct ext4_allocation_context *ac,
struct ext4_buddy *e4b)
{
struct super_block *sb = ac->ac_sb;
@@ -1668,7 +1673,8 @@
* we try to find stripe-aligned chunks for stripe-size requests
* XXX should do so at least for multiples of stripe size as well
*/
-static void ext4_mb_scan_aligned(struct ext4_allocation_context *ac,
+static noinline_for_stack
+void ext4_mb_scan_aligned(struct ext4_allocation_context *ac,
struct ext4_buddy *e4b)
{
struct super_block *sb = ac->ac_sb;
@@ -1831,7 +1837,8 @@
}
-static int ext4_mb_init_group(struct super_block *sb, ext4_group_t group)
+static noinline_for_stack
+int ext4_mb_init_group(struct super_block *sb, ext4_group_t group)
{
int ret;
@@ -2902,7 +2909,11 @@
void exit_ext4_mballoc(void)
{
- /* XXX: synchronize_rcu(); */
+ /*
+ * Wait for completion of call_rcu()'s on ext4_pspace_cachep
+ * before destroying the slab cache.
+ */
+ rcu_barrier();
kmem_cache_destroy(ext4_pspace_cachep);
kmem_cache_destroy(ext4_ac_cachep);
kmem_cache_destroy(ext4_free_ext_cachep);
@@ -3457,7 +3468,8 @@
* used in in-core bitmap. buddy must be generated from this bitmap
* Need to be called with ext4 group lock held
*/
-static void ext4_mb_generate_from_pa(struct super_block *sb, void *bitmap,
+static noinline_for_stack
+void ext4_mb_generate_from_pa(struct super_block *sb, void *bitmap,
ext4_group_t group)
{
struct ext4_group_info *grp = ext4_get_group_info(sb, group);
@@ -4215,14 +4227,9 @@
ext4_get_group_no_and_offset(sb, goal, &group, &block);
/* set up allocation goals */
+ memset(ac, 0, sizeof(struct ext4_allocation_context));
ac->ac_b_ex.fe_logical = ar->logical;
- ac->ac_b_ex.fe_group = 0;
- ac->ac_b_ex.fe_start = 0;
- ac->ac_b_ex.fe_len = 0;
ac->ac_status = AC_STATUS_CONTINUE;
- ac->ac_groups_scanned = 0;
- ac->ac_ex_scanned = 0;
- ac->ac_found = 0;
ac->ac_sb = sb;
ac->ac_inode = ar->inode;
ac->ac_o_ex.fe_logical = ar->logical;
@@ -4233,15 +4240,7 @@
ac->ac_g_ex.fe_group = group;
ac->ac_g_ex.fe_start = block;
ac->ac_g_ex.fe_len = len;
- ac->ac_f_ex.fe_len = 0;
ac->ac_flags = ar->flags;
- ac->ac_2order = 0;
- ac->ac_criteria = 0;
- ac->ac_pa = NULL;
- ac->ac_bitmap_page = NULL;
- ac->ac_buddy_page = NULL;
- ac->alloc_semp = NULL;
- ac->ac_lg = NULL;
/* we have to define context: we'll we work with a file or
* locality group. this is a policy, actually */
@@ -4509,10 +4508,7 @@
}
ac = kmem_cache_alloc(ext4_ac_cachep, GFP_NOFS);
- if (ac) {
- ac->ac_sb = sb;
- ac->ac_inode = ar->inode;
- } else {
+ if (!ac) {
ar->len = 0;
*errp = -ENOMEM;
goto out1;
diff --git a/fs/fat/dir.c b/fs/fat/dir.c
index 38ff75a..530b4ca 100644
--- a/fs/fat/dir.c
+++ b/fs/fat/dir.c
@@ -16,7 +16,6 @@
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/time.h>
-#include <linux/smp_lock.h>
#include <linux/buffer_head.h>
#include <linux/compat.h>
#include <asm/uaccess.h>
diff --git a/fs/fat/file.c b/fs/fat/file.c
index b28ea64..f042b96 100644
--- a/fs/fat/file.c
+++ b/fs/fat/file.c
@@ -134,7 +134,7 @@
if ((filp->f_mode & FMODE_WRITE) &&
MSDOS_SB(inode->i_sb)->options.flush) {
fat_flush_inodes(inode->i_sb, inode, NULL);
- congestion_wait(WRITE, HZ/10);
+ congestion_wait(BLK_RW_ASYNC, HZ/10);
}
return 0;
}
diff --git a/fs/fat/namei_msdos.c b/fs/fat/namei_msdos.c
index 82f88733..bbc94ae 100644
--- a/fs/fat/namei_msdos.c
+++ b/fs/fat/namei_msdos.c
@@ -9,7 +9,6 @@
#include <linux/module.h>
#include <linux/time.h>
#include <linux/buffer_head.h>
-#include <linux/smp_lock.h>
#include "fat.h"
/* Characters that are undesirable in an MS-DOS file name */
diff --git a/fs/fat/namei_vfat.c b/fs/fat/namei_vfat.c
index 73471b7..cb6e835 100644
--- a/fs/fat/namei_vfat.c
+++ b/fs/fat/namei_vfat.c
@@ -19,7 +19,6 @@
#include <linux/jiffies.h>
#include <linux/ctype.h>
#include <linux/slab.h>
-#include <linux/smp_lock.h>
#include <linux/buffer_head.h>
#include <linux/namei.h>
#include "fat.h"
diff --git a/fs/fcntl.c b/fs/fcntl.c
index a040b76..ae41308 100644
--- a/fs/fcntl.c
+++ b/fs/fcntl.c
@@ -19,7 +19,6 @@
#include <linux/signal.h>
#include <linux/rcupdate.h>
#include <linux/pid_namespace.h>
-#include <linux/smp_lock.h>
#include <asm/poll.h>
#include <asm/siginfo.h>
diff --git a/fs/freevxfs/vxfs_super.c b/fs/freevxfs/vxfs_super.c
index cdbd165..1e8af93 100644
--- a/fs/freevxfs/vxfs_super.c
+++ b/fs/freevxfs/vxfs_super.c
@@ -38,6 +38,7 @@
#include <linux/buffer_head.h>
#include <linux/kernel.h>
#include <linux/slab.h>
+#include <linux/smp_lock.h>
#include <linux/stat.h>
#include <linux/vfs.h>
#include <linux/mount.h>
diff --git a/fs/fuse/dev.c b/fs/fuse/dev.c
index 8fed2ed..6484eb7 100644
--- a/fs/fuse/dev.c
+++ b/fs/fuse/dev.c
@@ -286,8 +286,8 @@
}
if (fc->num_background == FUSE_CONGESTION_THRESHOLD &&
fc->connected && fc->bdi_initialized) {
- clear_bdi_congested(&fc->bdi, READ);
- clear_bdi_congested(&fc->bdi, WRITE);
+ clear_bdi_congested(&fc->bdi, BLK_RW_SYNC);
+ clear_bdi_congested(&fc->bdi, BLK_RW_ASYNC);
}
fc->num_background--;
fc->active_background--;
@@ -414,8 +414,8 @@
fc->blocked = 1;
if (fc->num_background == FUSE_CONGESTION_THRESHOLD &&
fc->bdi_initialized) {
- set_bdi_congested(&fc->bdi, READ);
- set_bdi_congested(&fc->bdi, WRITE);
+ set_bdi_congested(&fc->bdi, BLK_RW_SYNC);
+ set_bdi_congested(&fc->bdi, BLK_RW_ASYNC);
}
list_add_tail(&req->list, &fc->bg_queue);
flush_bg_queue(fc);
@@ -849,6 +849,81 @@
return err;
}
+static int fuse_notify_inval_inode(struct fuse_conn *fc, unsigned int size,
+ struct fuse_copy_state *cs)
+{
+ struct fuse_notify_inval_inode_out outarg;
+ int err = -EINVAL;
+
+ if (size != sizeof(outarg))
+ goto err;
+
+ err = fuse_copy_one(cs, &outarg, sizeof(outarg));
+ if (err)
+ goto err;
+ fuse_copy_finish(cs);
+
+ down_read(&fc->killsb);
+ err = -ENOENT;
+ if (!fc->sb)
+ goto err_unlock;
+
+ err = fuse_reverse_inval_inode(fc->sb, outarg.ino,
+ outarg.off, outarg.len);
+
+err_unlock:
+ up_read(&fc->killsb);
+ return err;
+
+err:
+ fuse_copy_finish(cs);
+ return err;
+}
+
+static int fuse_notify_inval_entry(struct fuse_conn *fc, unsigned int size,
+ struct fuse_copy_state *cs)
+{
+ struct fuse_notify_inval_entry_out outarg;
+ int err = -EINVAL;
+ char buf[FUSE_NAME_MAX+1];
+ struct qstr name;
+
+ if (size < sizeof(outarg))
+ goto err;
+
+ err = fuse_copy_one(cs, &outarg, sizeof(outarg));
+ if (err)
+ goto err;
+
+ err = -ENAMETOOLONG;
+ if (outarg.namelen > FUSE_NAME_MAX)
+ goto err;
+
+ name.name = buf;
+ name.len = outarg.namelen;
+ err = fuse_copy_one(cs, buf, outarg.namelen + 1);
+ if (err)
+ goto err;
+ fuse_copy_finish(cs);
+ buf[outarg.namelen] = 0;
+ name.hash = full_name_hash(name.name, name.len);
+
+ down_read(&fc->killsb);
+ err = -ENOENT;
+ if (!fc->sb)
+ goto err_unlock;
+
+ err = fuse_reverse_inval_entry(fc->sb, outarg.parent, &name);
+
+err_unlock:
+ up_read(&fc->killsb);
+ return err;
+
+err:
+ fuse_copy_finish(cs);
+ return err;
+}
+
static int fuse_notify(struct fuse_conn *fc, enum fuse_notify_code code,
unsigned int size, struct fuse_copy_state *cs)
{
@@ -856,6 +931,12 @@
case FUSE_NOTIFY_POLL:
return fuse_notify_poll(fc, size, cs);
+ case FUSE_NOTIFY_INVAL_INODE:
+ return fuse_notify_inval_inode(fc, size, cs);
+
+ case FUSE_NOTIFY_INVAL_ENTRY:
+ return fuse_notify_inval_entry(fc, size, cs);
+
default:
fuse_copy_finish(cs);
return -EINVAL;
@@ -910,7 +991,7 @@
unsigned long nr_segs, loff_t pos)
{
int err;
- unsigned nbytes = iov_length(iov, nr_segs);
+ size_t nbytes = iov_length(iov, nr_segs);
struct fuse_req *req;
struct fuse_out_header oh;
struct fuse_copy_state cs;
diff --git a/fs/fuse/dir.c b/fs/fuse/dir.c
index b3089a0..e703654 100644
--- a/fs/fuse/dir.c
+++ b/fs/fuse/dir.c
@@ -375,7 +375,7 @@
struct fuse_conn *fc = get_fuse_conn(dir);
struct fuse_req *req;
struct fuse_req *forget_req;
- struct fuse_open_in inarg;
+ struct fuse_create_in inarg;
struct fuse_open_out outopen;
struct fuse_entry_out outentry;
struct fuse_file *ff;
@@ -399,15 +399,20 @@
if (!ff)
goto out_put_request;
+ if (!fc->dont_mask)
+ mode &= ~current_umask();
+
flags &= ~O_NOCTTY;
memset(&inarg, 0, sizeof(inarg));
memset(&outentry, 0, sizeof(outentry));
inarg.flags = flags;
inarg.mode = mode;
+ inarg.umask = current_umask();
req->in.h.opcode = FUSE_CREATE;
req->in.h.nodeid = get_node_id(dir);
req->in.numargs = 2;
- req->in.args[0].size = sizeof(inarg);
+ req->in.args[0].size = fc->minor < 12 ? sizeof(struct fuse_open_in) :
+ sizeof(inarg);
req->in.args[0].value = &inarg;
req->in.args[1].size = entry->d_name.len + 1;
req->in.args[1].value = entry->d_name.name;
@@ -546,12 +551,17 @@
if (IS_ERR(req))
return PTR_ERR(req);
+ if (!fc->dont_mask)
+ mode &= ~current_umask();
+
memset(&inarg, 0, sizeof(inarg));
inarg.mode = mode;
inarg.rdev = new_encode_dev(rdev);
+ inarg.umask = current_umask();
req->in.h.opcode = FUSE_MKNOD;
req->in.numargs = 2;
- req->in.args[0].size = sizeof(inarg);
+ req->in.args[0].size = fc->minor < 12 ? FUSE_COMPAT_MKNOD_IN_SIZE :
+ sizeof(inarg);
req->in.args[0].value = &inarg;
req->in.args[1].size = entry->d_name.len + 1;
req->in.args[1].value = entry->d_name.name;
@@ -578,8 +588,12 @@
if (IS_ERR(req))
return PTR_ERR(req);
+ if (!fc->dont_mask)
+ mode &= ~current_umask();
+
memset(&inarg, 0, sizeof(inarg));
inarg.mode = mode;
+ inarg.umask = current_umask();
req->in.h.opcode = FUSE_MKDIR;
req->in.numargs = 2;
req->in.args[0].size = sizeof(inarg);
@@ -845,6 +859,43 @@
return err;
}
+int fuse_reverse_inval_entry(struct super_block *sb, u64 parent_nodeid,
+ struct qstr *name)
+{
+ int err = -ENOTDIR;
+ struct inode *parent;
+ struct dentry *dir;
+ struct dentry *entry;
+
+ parent = ilookup5(sb, parent_nodeid, fuse_inode_eq, &parent_nodeid);
+ if (!parent)
+ return -ENOENT;
+
+ mutex_lock(&parent->i_mutex);
+ if (!S_ISDIR(parent->i_mode))
+ goto unlock;
+
+ err = -ENOENT;
+ dir = d_find_alias(parent);
+ if (!dir)
+ goto unlock;
+
+ entry = d_lookup(dir, name);
+ dput(dir);
+ if (!entry)
+ goto unlock;
+
+ fuse_invalidate_attr(parent);
+ fuse_invalidate_entry(entry);
+ dput(entry);
+ err = 0;
+
+ unlock:
+ mutex_unlock(&parent->i_mutex);
+ iput(parent);
+ return err;
+}
+
/*
* Calling into a user-controlled filesystem gives the filesystem
* daemon ptrace-like capabilities over the requester process. This
diff --git a/fs/fuse/file.c b/fs/fuse/file.c
index fce6ce6..cbc4640 100644
--- a/fs/fuse/file.c
+++ b/fs/fuse/file.c
@@ -1922,7 +1922,7 @@
req = fuse_get_req(fc);
if (IS_ERR(req))
- return PTR_ERR(req);
+ return POLLERR;
req->in.h.opcode = FUSE_POLL;
req->in.h.nodeid = ff->nodeid;
diff --git a/fs/fuse/fuse_i.h b/fs/fuse/fuse_i.h
index aaf2f9f..52b641f 100644
--- a/fs/fuse/fuse_i.h
+++ b/fs/fuse/fuse_i.h
@@ -446,6 +446,9 @@
/** Do multi-page cached writes */
unsigned big_writes:1;
+ /** Don't apply umask to creation modes */
+ unsigned dont_mask:1;
+
/** The number of requests waiting for completion */
atomic_t num_waiting;
@@ -481,6 +484,12 @@
/** Called on final put */
void (*release)(struct fuse_conn *);
+
+ /** Super block for this connection. */
+ struct super_block *sb;
+
+ /** Read/write semaphore to hold when accessing sb. */
+ struct rw_semaphore killsb;
};
static inline struct fuse_conn *get_fuse_conn_super(struct super_block *sb)
@@ -509,6 +518,11 @@
extern const struct dentry_operations fuse_dentry_operations;
/**
+ * Inode to nodeid comparison.
+ */
+int fuse_inode_eq(struct inode *inode, void *_nodeidp);
+
+/**
* Get a filled in inode
*/
struct inode *fuse_iget(struct super_block *sb, u64 nodeid,
@@ -708,6 +722,19 @@
u64 fuse_get_attr_version(struct fuse_conn *fc);
+/**
+ * File-system tells the kernel to invalidate cache for the given node id.
+ */
+int fuse_reverse_inval_inode(struct super_block *sb, u64 nodeid,
+ loff_t offset, loff_t len);
+
+/**
+ * File-system tells the kernel to invalidate parent attributes and
+ * the dentry matching parent/name.
+ */
+int fuse_reverse_inval_entry(struct super_block *sb, u64 parent_nodeid,
+ struct qstr *name);
+
int fuse_do_open(struct fuse_conn *fc, u64 nodeid, struct file *file,
bool isdir);
ssize_t fuse_direct_io(struct file *file, const char __user *buf,
diff --git a/fs/fuse/inode.c b/fs/fuse/inode.c
index d8673cc..f91ccc4 100644
--- a/fs/fuse/inode.c
+++ b/fs/fuse/inode.c
@@ -206,7 +206,7 @@
BUG();
}
-static int fuse_inode_eq(struct inode *inode, void *_nodeidp)
+int fuse_inode_eq(struct inode *inode, void *_nodeidp)
{
u64 nodeid = *(u64 *) _nodeidp;
if (get_node_id(inode) == nodeid)
@@ -257,6 +257,31 @@
return inode;
}
+int fuse_reverse_inval_inode(struct super_block *sb, u64 nodeid,
+ loff_t offset, loff_t len)
+{
+ struct inode *inode;
+ pgoff_t pg_start;
+ pgoff_t pg_end;
+
+ inode = ilookup5(sb, nodeid, fuse_inode_eq, &nodeid);
+ if (!inode)
+ return -ENOENT;
+
+ fuse_invalidate_attr(inode);
+ if (offset >= 0) {
+ pg_start = offset >> PAGE_CACHE_SHIFT;
+ if (len <= 0)
+ pg_end = -1;
+ else
+ pg_end = (offset + len - 1) >> PAGE_CACHE_SHIFT;
+ invalidate_inode_pages2_range(inode->i_mapping,
+ pg_start, pg_end);
+ }
+ iput(inode);
+ return 0;
+}
+
static void fuse_umount_begin(struct super_block *sb)
{
fuse_abort_conn(get_fuse_conn_super(sb));
@@ -480,6 +505,7 @@
memset(fc, 0, sizeof(*fc));
spin_lock_init(&fc->lock);
mutex_init(&fc->inst_mutex);
+ init_rwsem(&fc->killsb);
atomic_set(&fc->count, 1);
init_waitqueue_head(&fc->waitq);
init_waitqueue_head(&fc->blocked_waitq);
@@ -725,6 +751,8 @@
}
if (arg->flags & FUSE_BIG_WRITES)
fc->big_writes = 1;
+ if (arg->flags & FUSE_DONT_MASK)
+ fc->dont_mask = 1;
} else {
ra_pages = fc->max_read / PAGE_CACHE_SIZE;
fc->no_lock = 1;
@@ -748,7 +776,7 @@
arg->minor = FUSE_KERNEL_MINOR_VERSION;
arg->max_readahead = fc->bdi.ra_pages * PAGE_CACHE_SIZE;
arg->flags |= FUSE_ASYNC_READ | FUSE_POSIX_LOCKS | FUSE_ATOMIC_O_TRUNC |
- FUSE_EXPORT_SUPPORT | FUSE_BIG_WRITES;
+ FUSE_EXPORT_SUPPORT | FUSE_BIG_WRITES | FUSE_DONT_MASK;
req->in.h.opcode = FUSE_INIT;
req->in.numargs = 1;
req->in.args[0].size = sizeof(*arg);
@@ -860,10 +888,16 @@
fuse_conn_init(fc);
fc->dev = sb->s_dev;
+ fc->sb = sb;
err = fuse_bdi_init(fc, sb);
if (err)
goto err_put_conn;
+ /* Handle umasking inside the fuse code */
+ if (sb->s_flags & MS_POSIXACL)
+ fc->dont_mask = 1;
+ sb->s_flags |= MS_POSIXACL;
+
fc->release = fuse_free_conn;
fc->flags = d.flags;
fc->user_id = d.user_id;
@@ -941,12 +975,25 @@
return get_sb_nodev(fs_type, flags, raw_data, fuse_fill_super, mnt);
}
+static void fuse_kill_sb_anon(struct super_block *sb)
+{
+ struct fuse_conn *fc = get_fuse_conn_super(sb);
+
+ if (fc) {
+ down_write(&fc->killsb);
+ fc->sb = NULL;
+ up_write(&fc->killsb);
+ }
+
+ kill_anon_super(sb);
+}
+
static struct file_system_type fuse_fs_type = {
.owner = THIS_MODULE,
.name = "fuse",
.fs_flags = FS_HAS_SUBTYPE,
.get_sb = fuse_get_sb,
- .kill_sb = kill_anon_super,
+ .kill_sb = fuse_kill_sb_anon,
};
#ifdef CONFIG_BLOCK
@@ -958,11 +1005,24 @@
mnt);
}
+static void fuse_kill_sb_blk(struct super_block *sb)
+{
+ struct fuse_conn *fc = get_fuse_conn_super(sb);
+
+ if (fc) {
+ down_write(&fc->killsb);
+ fc->sb = NULL;
+ up_write(&fc->killsb);
+ }
+
+ kill_block_super(sb);
+}
+
static struct file_system_type fuseblk_fs_type = {
.owner = THIS_MODULE,
.name = "fuseblk",
.get_sb = fuse_get_sb_blk,
- .kill_sb = kill_block_super,
+ .kill_sb = fuse_kill_sb_blk,
.fs_flags = FS_REQUIRES_DEV | FS_HAS_SUBTYPE,
};
diff --git a/fs/hfs/super.c b/fs/hfs/super.c
index 6f833dc..f7fcbe4 100644
--- a/fs/hfs/super.c
+++ b/fs/hfs/super.c
@@ -19,6 +19,7 @@
#include <linux/nls.h>
#include <linux/parser.h>
#include <linux/seq_file.h>
+#include <linux/smp_lock.h>
#include <linux/vfs.h>
#include "hfs_fs.h"
diff --git a/fs/hfsplus/super.c b/fs/hfsplus/super.c
index 9fc3af0c..c0759fe 100644
--- a/fs/hfsplus/super.c
+++ b/fs/hfsplus/super.c
@@ -12,6 +12,7 @@
#include <linux/pagemap.h>
#include <linux/fs.h>
#include <linux/slab.h>
+#include <linux/smp_lock.h>
#include <linux/vfs.h>
#include <linux/nls.h>
diff --git a/fs/hostfs/hostfs_kern.c b/fs/hostfs/hostfs_kern.c
index fe02ad4..032604e 100644
--- a/fs/hostfs/hostfs_kern.c
+++ b/fs/hostfs/hostfs_kern.c
@@ -972,6 +972,7 @@
sb->s_blocksize_bits = 10;
sb->s_magic = HOSTFS_SUPER_MAGIC;
sb->s_op = &hostfs_sbops;
+ sb->s_maxbytes = MAX_LFS_FILESIZE;
/* NULL is printed as <NULL> by sprintf: avoid that. */
if (req_root == NULL)
diff --git a/fs/hpfs/dir.c b/fs/hpfs/dir.c
index 6916c41..8865c94 100644
--- a/fs/hpfs/dir.c
+++ b/fs/hpfs/dir.c
@@ -6,6 +6,7 @@
* directory VFS functions
*/
+#include <linux/smp_lock.h>
#include "hpfs_fn.h"
static int hpfs_dir_release(struct inode *inode, struct file *filp)
diff --git a/fs/hpfs/file.c b/fs/hpfs/file.c
index 64ab522..3efabff 100644
--- a/fs/hpfs/file.c
+++ b/fs/hpfs/file.c
@@ -6,6 +6,7 @@
* file VFS functions
*/
+#include <linux/smp_lock.h>
#include "hpfs_fn.h"
#define BLOCKS(size) (((size) + 511) >> 9)
diff --git a/fs/hpfs/hpfs_fn.h b/fs/hpfs/hpfs_fn.h
index c2ea31b..701ca54 100644
--- a/fs/hpfs/hpfs_fn.h
+++ b/fs/hpfs/hpfs_fn.h
@@ -13,7 +13,6 @@
#include <linux/pagemap.h>
#include <linux/buffer_head.h>
#include <linux/slab.h>
-#include <linux/smp_lock.h>
#include "hpfs.h"
diff --git a/fs/hpfs/inode.c b/fs/hpfs/inode.c
index 39a1bfb..fe703ae 100644
--- a/fs/hpfs/inode.c
+++ b/fs/hpfs/inode.c
@@ -6,6 +6,7 @@
* inode VFS functions
*/
+#include <linux/smp_lock.h>
#include "hpfs_fn.h"
void hpfs_init_inode(struct inode *i)
diff --git a/fs/hpfs/namei.c b/fs/hpfs/namei.c
index b649232..82b9c4b 100644
--- a/fs/hpfs/namei.c
+++ b/fs/hpfs/namei.c
@@ -6,6 +6,7 @@
* adding & removing files & directories
*/
#include <linux/sched.h>
+#include <linux/smp_lock.h>
#include "hpfs_fn.h"
static int hpfs_mkdir(struct inode *dir, struct dentry *dentry, int mode)
diff --git a/fs/isofs/inode.c b/fs/isofs/inode.c
index 58a7963..85f96bc 100644
--- a/fs/isofs/inode.c
+++ b/fs/isofs/inode.c
@@ -142,6 +142,7 @@
struct iso9660_options{
unsigned int rock:1;
+ unsigned int joliet:1;
unsigned int cruft:1;
unsigned int hide:1;
unsigned int showassoc:1;
@@ -151,7 +152,6 @@
unsigned int gid_set:1;
unsigned int utf8:1;
unsigned char map;
- char joliet;
unsigned char check;
unsigned int blocksize;
mode_t fmode;
@@ -632,7 +632,7 @@
else if (isonum_711(vdp->type) == ISO_VD_SUPPLEMENTARY) {
sec = (struct iso_supplementary_descriptor *)vdp;
if (sec->escape[0] == 0x25 && sec->escape[1] == 0x2f) {
- if (opt.joliet == 'y') {
+ if (opt.joliet) {
if (sec->escape[2] == 0x40)
joliet_level = 1;
else if (sec->escape[2] == 0x43)
diff --git a/fs/jbd2/journal.c b/fs/jbd2/journal.c
index 18bfd5d..e378cb3 100644
--- a/fs/jbd2/journal.c
+++ b/fs/jbd2/journal.c
@@ -297,6 +297,7 @@
unsigned int new_offset;
struct buffer_head *bh_in = jh2bh(jh_in);
struct jbd2_buffer_trigger_type *triggers;
+ journal_t *journal = transaction->t_journal;
/*
* The buffer really shouldn't be locked: only the current committing
@@ -310,6 +311,11 @@
J_ASSERT_BH(bh_in, buffer_jbddirty(bh_in));
new_bh = alloc_buffer_head(GFP_NOFS|__GFP_NOFAIL);
+ /* keep subsequent assertions sane */
+ new_bh->b_state = 0;
+ init_buffer(new_bh, NULL, NULL);
+ atomic_set(&new_bh->b_count, 1);
+ new_jh = jbd2_journal_add_journal_head(new_bh); /* This sleeps */
/*
* If a new transaction has already done a buffer copy-out, then
@@ -388,14 +394,6 @@
kunmap_atomic(mapped_data, KM_USER0);
}
- /* keep subsequent assertions sane */
- new_bh->b_state = 0;
- init_buffer(new_bh, NULL, NULL);
- atomic_set(&new_bh->b_count, 1);
- jbd_unlock_bh_state(bh_in);
-
- new_jh = jbd2_journal_add_journal_head(new_bh); /* This sleeps */
-
set_bh_page(new_bh, new_page, new_offset);
new_jh->b_transaction = NULL;
new_bh->b_size = jh2bh(jh_in)->b_size;
@@ -412,7 +410,11 @@
* copying is moved to the transaction's shadow queue.
*/
JBUFFER_TRACE(jh_in, "file as BJ_Shadow");
- jbd2_journal_file_buffer(jh_in, transaction, BJ_Shadow);
+ spin_lock(&journal->j_list_lock);
+ __jbd2_journal_file_buffer(jh_in, transaction, BJ_Shadow);
+ spin_unlock(&journal->j_list_lock);
+ jbd_unlock_bh_state(bh_in);
+
JBUFFER_TRACE(new_jh, "file as BJ_IO");
jbd2_journal_file_buffer(new_jh, transaction, BJ_IO);
@@ -2410,6 +2412,7 @@
int i = hash_32(device, CACHE_SIZE_BITS);
char *ret;
struct block_device *bd;
+ static struct devname_cache *new_dev;
rcu_read_lock();
if (devcache[i] && devcache[i]->device == device) {
@@ -2419,20 +2422,20 @@
}
rcu_read_unlock();
+ new_dev = kmalloc(sizeof(struct devname_cache), GFP_KERNEL);
+ if (!new_dev)
+ return "NODEV-ALLOCFAILURE"; /* Something non-NULL */
spin_lock(&devname_cache_lock);
if (devcache[i]) {
if (devcache[i]->device == device) {
+ kfree(new_dev);
ret = devcache[i]->devname;
spin_unlock(&devname_cache_lock);
return ret;
}
call_rcu(&devcache[i]->rcu, free_devcache);
}
- devcache[i] = kmalloc(sizeof(struct devname_cache), GFP_KERNEL);
- if (!devcache[i]) {
- spin_unlock(&devname_cache_lock);
- return "NODEV-ALLOCFAILURE"; /* Something non-NULL */
- }
+ devcache[i] = new_dev;
devcache[i]->device = device;
bd = bdget(device);
if (bd) {
diff --git a/fs/jbd2/transaction.c b/fs/jbd2/transaction.c
index 494501e..6213ac7 100644
--- a/fs/jbd2/transaction.c
+++ b/fs/jbd2/transaction.c
@@ -499,34 +499,15 @@
wake_up(&journal->j_wait_transaction_locked);
}
-/*
- * Report any unexpected dirty buffers which turn up. Normally those
- * indicate an error, but they can occur if the user is running (say)
- * tune2fs to modify the live filesystem, so we need the option of
- * continuing as gracefully as possible. #
- *
- * The caller should already hold the journal lock and
- * j_list_lock spinlock: most callers will need those anyway
- * in order to probe the buffer's journaling state safely.
- */
-static void jbd_unexpected_dirty_buffer(struct journal_head *jh)
+static void warn_dirty_buffer(struct buffer_head *bh)
{
- int jlist;
+ char b[BDEVNAME_SIZE];
- /* If this buffer is one which might reasonably be dirty
- * --- ie. data, or not part of this journal --- then
- * we're OK to leave it alone, but otherwise we need to
- * move the dirty bit to the journal's own internal
- * JBDDirty bit. */
- jlist = jh->b_jlist;
-
- if (jlist == BJ_Metadata || jlist == BJ_Reserved ||
- jlist == BJ_Shadow || jlist == BJ_Forget) {
- struct buffer_head *bh = jh2bh(jh);
-
- if (test_clear_buffer_dirty(bh))
- set_buffer_jbddirty(bh);
- }
+ printk(KERN_WARNING
+ "JBD: Spotted dirty metadata buffer (dev = %s, blocknr = %llu). "
+ "There's a risk of filesystem corruption in case of system "
+ "crash.\n",
+ bdevname(bh->b_bdev, b), (unsigned long long)bh->b_blocknr);
}
/*
@@ -593,14 +574,16 @@
if (jh->b_next_transaction)
J_ASSERT_JH(jh, jh->b_next_transaction ==
transaction);
+ warn_dirty_buffer(bh);
}
/*
* In any case we need to clean the dirty flag and we must
* do it under the buffer lock to be sure we don't race
* with running write-out.
*/
- JBUFFER_TRACE(jh, "Unexpected dirty buffer");
- jbd_unexpected_dirty_buffer(jh);
+ JBUFFER_TRACE(jh, "Journalling dirty buffer");
+ clear_buffer_dirty(bh);
+ set_buffer_jbddirty(bh);
}
unlock_buffer(bh);
@@ -843,6 +826,15 @@
J_ASSERT_JH(jh, buffer_locked(jh2bh(jh)));
if (jh->b_transaction == NULL) {
+ /*
+ * Previous jbd2_journal_forget() could have left the buffer
+ * with jbddirty bit set because it was being committed. When
+ * the commit finished, we've filed the buffer for
+ * checkpointing and marked it dirty. Now we are reallocating
+ * the buffer so the transaction freeing it must have
+ * committed and so it's safe to clear the dirty bit.
+ */
+ clear_buffer_dirty(jh2bh(jh));
jh->b_transaction = transaction;
/* first access by this transaction */
@@ -1644,8 +1636,13 @@
if (jh->b_cp_transaction) {
JBUFFER_TRACE(jh, "on running+cp transaction");
+ /*
+ * We don't want to write the buffer anymore, clear the
+ * bit so that we don't confuse checks in
+ * __journal_file_buffer
+ */
+ clear_buffer_dirty(bh);
__jbd2_journal_file_buffer(jh, transaction, BJ_Forget);
- clear_buffer_jbddirty(bh);
may_free = 0;
} else {
JBUFFER_TRACE(jh, "on running transaction");
@@ -1896,12 +1893,17 @@
if (jh->b_transaction && jh->b_jlist == jlist)
return;
- /* The following list of buffer states needs to be consistent
- * with __jbd_unexpected_dirty_buffer()'s handling of dirty
- * state. */
-
if (jlist == BJ_Metadata || jlist == BJ_Reserved ||
jlist == BJ_Shadow || jlist == BJ_Forget) {
+ /*
+ * For metadata buffers, we track dirty bit in buffer_jbddirty
+ * instead of buffer_dirty. We should not see a dirty bit set
+ * here because we clear it in do_get_write_access but e.g.
+ * tune2fs can modify the sb and set the dirty bit at any time
+ * so we try to gracefully handle that.
+ */
+ if (buffer_dirty(bh))
+ warn_dirty_buffer(bh);
if (test_clear_buffer_dirty(bh) ||
test_clear_buffer_jbddirty(bh))
was_dirty = 1;
diff --git a/fs/jffs2/erase.c b/fs/jffs2/erase.c
index a024474..b47679b 100644
--- a/fs/jffs2/erase.c
+++ b/fs/jffs2/erase.c
@@ -270,19 +270,21 @@
D2({
int i=0;
struct jffs2_raw_node_ref *this;
- printk(KERN_DEBUG "After remove_node_refs_from_ino_list: \n" KERN_DEBUG);
+ printk(KERN_DEBUG "After remove_node_refs_from_ino_list: \n");
this = ic->nodes;
+ printk(KERN_DEBUG);
while(this) {
- printk( "0x%08x(%d)->", ref_offset(this), ref_flags(this));
+ printk(KERN_CONT "0x%08x(%d)->",
+ ref_offset(this), ref_flags(this));
if (++i == 5) {
- printk("\n" KERN_DEBUG);
+ printk(KERN_DEBUG);
i=0;
}
this = this->next_in_ino;
}
- printk("\n");
+ printk(KERN_CONT "\n");
});
switch (ic->class) {
diff --git a/fs/jffs2/scan.c b/fs/jffs2/scan.c
index 7515e73..696686c 100644
--- a/fs/jffs2/scan.c
+++ b/fs/jffs2/scan.c
@@ -130,9 +130,9 @@
if (jffs2_sum_active()) {
s = kzalloc(sizeof(struct jffs2_summary), GFP_KERNEL);
if (!s) {
- kfree(flashbuf);
JFFS2_WARNING("Can't allocate memory for summary\n");
- return -ENOMEM;
+ ret = -ENOMEM;
+ goto out;
}
}
diff --git a/fs/jffs2/super.c b/fs/jffs2/super.c
index 07a22ca..0035c02 100644
--- a/fs/jffs2/super.c
+++ b/fs/jffs2/super.c
@@ -12,6 +12,7 @@
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/slab.h>
+#include <linux/smp_lock.h>
#include <linux/init.h>
#include <linux/list.h>
#include <linux/fs.h>
diff --git a/fs/lockd/clntproc.c b/fs/lockd/clntproc.c
index f2fdcbc..4336adb 100644
--- a/fs/lockd/clntproc.c
+++ b/fs/lockd/clntproc.c
@@ -7,6 +7,7 @@
*/
#include <linux/module.h>
+#include <linux/smp_lock.h>
#include <linux/types.h>
#include <linux/errno.h>
#include <linux/fs.h>
diff --git a/fs/lockd/svc4proc.c b/fs/lockd/svc4proc.c
index 17250373..bd173a6 100644
--- a/fs/lockd/svc4proc.c
+++ b/fs/lockd/svc4proc.c
@@ -10,6 +10,7 @@
#include <linux/types.h>
#include <linux/time.h>
#include <linux/slab.h>
+#include <linux/smp_lock.h>
#include <linux/in.h>
#include <linux/sunrpc/svc.h>
#include <linux/sunrpc/clnt.h>
diff --git a/fs/lockd/svcproc.c b/fs/lockd/svcproc.c
index 3688e55..e1d28dd 100644
--- a/fs/lockd/svcproc.c
+++ b/fs/lockd/svcproc.c
@@ -10,6 +10,7 @@
#include <linux/types.h>
#include <linux/time.h>
#include <linux/slab.h>
+#include <linux/smp_lock.h>
#include <linux/in.h>
#include <linux/sunrpc/svc.h>
#include <linux/sunrpc/clnt.h>
diff --git a/fs/namei.c b/fs/namei.c
index 5b961eb..f3c5b27 100644
--- a/fs/namei.c
+++ b/fs/namei.c
@@ -1761,6 +1761,10 @@
goto exit;
}
filp = nameidata_to_filp(&nd, open_flag);
+ if (IS_ERR(filp))
+ ima_counts_put(&nd.path,
+ acc_mode & (MAY_READ | MAY_WRITE |
+ MAY_EXEC));
mnt_drop_write(nd.path.mnt);
if (nd.root.mnt)
path_put(&nd.root);
@@ -1817,6 +1821,9 @@
goto exit;
}
filp = nameidata_to_filp(&nd, open_flag);
+ if (IS_ERR(filp))
+ ima_counts_put(&nd.path,
+ acc_mode & (MAY_READ | MAY_WRITE | MAY_EXEC));
/*
* It is now safe to drop the mnt write
* because the filp has had a write taken
diff --git a/fs/namespace.c b/fs/namespace.c
index 3dc283f..277c28a 100644
--- a/fs/namespace.c
+++ b/fs/namespace.c
@@ -22,6 +22,7 @@
#include <linux/seq_file.h>
#include <linux/mnt_namespace.h>
#include <linux/namei.h>
+#include <linux/nsproxy.h>
#include <linux/security.h>
#include <linux/mount.h>
#include <linux/ramfs.h>
diff --git a/fs/nfs/delegation.c b/fs/nfs/delegation.c
index af05b91..6dd48a4 100644
--- a/fs/nfs/delegation.c
+++ b/fs/nfs/delegation.c
@@ -10,6 +10,7 @@
#include <linux/kthread.h>
#include <linux/module.h>
#include <linux/sched.h>
+#include <linux/smp_lock.h>
#include <linux/spinlock.h>
#include <linux/nfs4.h>
diff --git a/fs/nfs/dir.c b/fs/nfs/dir.c
index 89f98e9..38d42c2 100644
--- a/fs/nfs/dir.c
+++ b/fs/nfs/dir.c
@@ -29,7 +29,6 @@
#include <linux/nfs_fs.h>
#include <linux/nfs_mount.h>
#include <linux/pagemap.h>
-#include <linux/smp_lock.h>
#include <linux/pagevec.h>
#include <linux/namei.h>
#include <linux/mount.h>
diff --git a/fs/nfs/file.c b/fs/nfs/file.c
index 0055b81..0506232 100644
--- a/fs/nfs/file.c
+++ b/fs/nfs/file.c
@@ -26,7 +26,6 @@
#include <linux/mm.h>
#include <linux/slab.h>
#include <linux/pagemap.h>
-#include <linux/smp_lock.h>
#include <linux/aio.h>
#include <asm/uaccess.h>
diff --git a/fs/nfs/getroot.c b/fs/nfs/getroot.c
index 46177cb..b35d2a6 100644
--- a/fs/nfs/getroot.c
+++ b/fs/nfs/getroot.c
@@ -30,7 +30,6 @@
#include <linux/nfs_idmap.h>
#include <linux/vfs.h>
#include <linux/namei.h>
-#include <linux/mnt_namespace.h>
#include <linux/security.h>
#include <asm/system.h>
diff --git a/fs/nfs/inode.c b/fs/nfs/inode.c
index 64f87194d..bd7938e 100644
--- a/fs/nfs/inode.c
+++ b/fs/nfs/inode.c
@@ -30,7 +30,6 @@
#include <linux/nfs_mount.h>
#include <linux/nfs4_mount.h>
#include <linux/lockd/bind.h>
-#include <linux/smp_lock.h>
#include <linux/seq_file.h>
#include <linux/mount.h>
#include <linux/nfs_idmap.h>
diff --git a/fs/nfs/nfs4proc.c b/fs/nfs/nfs4proc.c
index 92ce435..ff0c080 100644
--- a/fs/nfs/nfs4proc.c
+++ b/fs/nfs/nfs4proc.c
@@ -45,7 +45,6 @@
#include <linux/nfs4.h>
#include <linux/nfs_fs.h>
#include <linux/nfs_page.h>
-#include <linux/smp_lock.h>
#include <linux/namei.h>
#include <linux/mount.h>
#include <linux/module.h>
diff --git a/fs/nfs/read.c b/fs/nfs/read.c
index 96c4ebf..73ea5e8 100644
--- a/fs/nfs/read.c
+++ b/fs/nfs/read.c
@@ -18,7 +18,6 @@
#include <linux/sunrpc/clnt.h>
#include <linux/nfs_fs.h>
#include <linux/nfs_page.h>
-#include <linux/smp_lock.h>
#include <asm/system.h>
diff --git a/fs/nfs/write.c b/fs/nfs/write.c
index ce72882..0a0a2ff 100644
--- a/fs/nfs/write.c
+++ b/fs/nfs/write.c
@@ -202,8 +202,10 @@
struct nfs_server *nfss = NFS_SERVER(inode);
if (atomic_long_inc_return(&nfss->writeback) >
- NFS_CONGESTION_ON_THRESH)
- set_bdi_congested(&nfss->backing_dev_info, WRITE);
+ NFS_CONGESTION_ON_THRESH) {
+ set_bdi_congested(&nfss->backing_dev_info,
+ BLK_RW_ASYNC);
+ }
}
return ret;
}
@@ -215,7 +217,7 @@
end_page_writeback(page);
if (atomic_long_dec_return(&nfss->writeback) < NFS_CONGESTION_OFF_THRESH)
- clear_bdi_congested(&nfss->backing_dev_info, WRITE);
+ clear_bdi_congested(&nfss->backing_dev_info, BLK_RW_ASYNC);
}
/*
diff --git a/fs/nfsd/nfsctl.c b/fs/nfsd/nfsctl.c
index 1250fb9..6d08475 100644
--- a/fs/nfsd/nfsctl.c
+++ b/fs/nfsd/nfsctl.c
@@ -25,7 +25,6 @@
#include <linux/init.h>
#include <linux/inet.h>
#include <linux/string.h>
-#include <linux/smp_lock.h>
#include <linux/ctype.h>
#include <linux/nfs.h>
diff --git a/fs/nfsd/nfssvc.c b/fs/nfsd/nfssvc.c
index d4c9884..492c79b 100644
--- a/fs/nfsd/nfssvc.c
+++ b/fs/nfsd/nfssvc.c
@@ -18,7 +18,6 @@
#include <linux/unistd.h>
#include <linux/slab.h>
#include <linux/smp.h>
-#include <linux/smp_lock.h>
#include <linux/freezer.h>
#include <linux/fs_struct.h>
#include <linux/kthread.h>
diff --git a/fs/nfsd/vfs.c b/fs/nfsd/vfs.c
index 4145083..23341c1 100644
--- a/fs/nfsd/vfs.c
+++ b/fs/nfsd/vfs.c
@@ -678,7 +678,6 @@
nfsd_open(struct svc_rqst *rqstp, struct svc_fh *fhp, int type,
int access, struct file **filp)
{
- const struct cred *cred = current_cred();
struct dentry *dentry;
struct inode *inode;
int flags = O_RDONLY|O_LARGEFILE;
@@ -733,7 +732,7 @@
vfs_dq_init(inode);
}
*filp = dentry_open(dget(dentry), mntget(fhp->fh_export->ex_path.mnt),
- flags, cred);
+ flags, current_cred());
if (IS_ERR(*filp))
host_err = PTR_ERR(*filp);
else
diff --git a/fs/nilfs2/bmap.c b/fs/nilfs2/bmap.c
index 36df60b..99d58a0 100644
--- a/fs/nilfs2/bmap.c
+++ b/fs/nilfs2/bmap.c
@@ -568,6 +568,7 @@
}
static struct lock_class_key nilfs_bmap_dat_lock_key;
+static struct lock_class_key nilfs_bmap_mdt_lock_key;
/**
* nilfs_bmap_read - read a bmap from an inode
@@ -603,7 +604,11 @@
bmap->b_ptr_type = NILFS_BMAP_PTR_VS;
bmap->b_last_allocated_key = 0;
bmap->b_last_allocated_ptr = NILFS_BMAP_INVALID_PTR;
+ lockdep_set_class(&bmap->b_sem, &nilfs_bmap_mdt_lock_key);
break;
+ case NILFS_IFILE_INO:
+ lockdep_set_class(&bmap->b_sem, &nilfs_bmap_mdt_lock_key);
+ /* Fall through */
default:
bmap->b_ptr_type = NILFS_BMAP_PTR_VM;
bmap->b_last_allocated_key = 0;
diff --git a/fs/nilfs2/cpfile.c b/fs/nilfs2/cpfile.c
index 7d49813..aec942c 100644
--- a/fs/nilfs2/cpfile.c
+++ b/fs/nilfs2/cpfile.c
@@ -307,7 +307,7 @@
ret = nilfs_cpfile_get_checkpoint_block(cpfile, cno, 0, &cp_bh);
if (ret < 0) {
if (ret != -ENOENT)
- goto out_header;
+ break;
/* skip hole */
ret = 0;
continue;
@@ -340,7 +340,7 @@
continue;
printk(KERN_ERR "%s: cannot delete block\n",
__func__);
- goto out_header;
+ break;
}
}
@@ -358,7 +358,6 @@
kunmap_atomic(kaddr, KM_USER0);
}
- out_header:
brelse(header_bh);
out_sem:
diff --git a/fs/nilfs2/dat.c b/fs/nilfs2/dat.c
index 0b2710e..8927ca2 100644
--- a/fs/nilfs2/dat.c
+++ b/fs/nilfs2/dat.c
@@ -134,15 +134,6 @@
entry = nilfs_palloc_block_get_entry(dat, req->pr_entry_nr,
req->pr_entry_bh, kaddr);
entry->de_start = cpu_to_le64(nilfs_mdt_cno(dat));
- if (entry->de_blocknr != cpu_to_le64(0) ||
- entry->de_end != cpu_to_le64(NILFS_CNO_MAX)) {
- printk(KERN_CRIT
- "%s: vbn = %llu, start = %llu, end = %llu, pbn = %llu\n",
- __func__, (unsigned long long)req->pr_entry_nr,
- (unsigned long long)le64_to_cpu(entry->de_start),
- (unsigned long long)le64_to_cpu(entry->de_end),
- (unsigned long long)le64_to_cpu(entry->de_blocknr));
- }
entry->de_blocknr = cpu_to_le64(blocknr);
kunmap_atomic(kaddr, KM_USER0);
diff --git a/fs/nilfs2/dir.c b/fs/nilfs2/dir.c
index 54100ac..1a4fa04 100644
--- a/fs/nilfs2/dir.c
+++ b/fs/nilfs2/dir.c
@@ -43,7 +43,6 @@
*/
#include <linux/pagemap.h>
-#include <linux/smp_lock.h>
#include "nilfs.h"
#include "page.h"
diff --git a/fs/nilfs2/segment.c b/fs/nilfs2/segment.c
index aa97754..8b5e477 100644
--- a/fs/nilfs2/segment.c
+++ b/fs/nilfs2/segment.c
@@ -1829,26 +1829,13 @@
err = nilfs_segbuf_write(segbuf, &wi);
res = nilfs_segbuf_wait(segbuf, &wi);
- err = unlikely(err) ? : res;
- if (unlikely(err))
+ err = err ? : res;
+ if (err)
return err;
}
return 0;
}
-static int nilfs_page_has_uncleared_buffer(struct page *page)
-{
- struct buffer_head *head, *bh;
-
- head = bh = page_buffers(page);
- do {
- if (buffer_dirty(bh) && !list_empty(&bh->b_assoc_buffers))
- return 1;
- bh = bh->b_this_page;
- } while (bh != head);
- return 0;
-}
-
static void __nilfs_end_page_io(struct page *page, int err)
{
if (!err) {
@@ -1872,12 +1859,11 @@
if (!page)
return;
- if (buffer_nilfs_node(page_buffers(page)) &&
- nilfs_page_has_uncleared_buffer(page))
- /* For b-tree node pages, this function may be called twice
- or more because they might be split in a segment.
- This check assures that cleanup has been done for all
- buffers in a split btnode page. */
+ if (buffer_nilfs_node(page_buffers(page)) && !PageWriteback(page))
+ /*
+ * For b-tree node pages, this function may be called twice
+ * or more because they might be split in a segment.
+ */
return;
__nilfs_end_page_io(page, err);
@@ -1940,7 +1926,7 @@
}
if (bh->b_page != fs_page) {
nilfs_end_page_io(fs_page, err);
- if (unlikely(fs_page == failed_page))
+ if (fs_page && fs_page == failed_page)
goto done;
fs_page = bh->b_page;
}
diff --git a/fs/notify/inotify/inotify_user.c b/fs/notify/inotify/inotify_user.c
index ff231ad..ff27a29 100644
--- a/fs/notify/inotify/inotify_user.c
+++ b/fs/notify/inotify/inotify_user.c
@@ -296,12 +296,15 @@
static int inotify_release(struct inode *ignored, struct file *file)
{
struct fsnotify_group *group = file->private_data;
+ struct user_struct *user = group->inotify_data.user;
fsnotify_clear_marks_by_group(group);
/* free this group, matching get was inotify_init->fsnotify_obtain_group */
fsnotify_put_group(group);
+ atomic_dec(&user->inotify_devs);
+
return 0;
}
diff --git a/fs/ocfs2/ioctl.c b/fs/ocfs2/ioctl.c
index 9fcd36d..467b413 100644
--- a/fs/ocfs2/ioctl.c
+++ b/fs/ocfs2/ioctl.c
@@ -7,7 +7,6 @@
#include <linux/fs.h>
#include <linux/mount.h>
-#include <linux/smp_lock.h>
#define MLOG_MASK_PREFIX ML_INODE
#include <cluster/masklog.h>
diff --git a/fs/partitions/check.c b/fs/partitions/check.c
index 1a9c787..ea4e6cb 100644
--- a/fs/partitions/check.c
+++ b/fs/partitions/check.c
@@ -436,7 +436,7 @@
rcu_assign_pointer(ptbl->part[partno], p);
/* suppress uevent if the disk supresses it */
- if (!dev_get_uevent_suppress(pdev))
+ if (!dev_get_uevent_suppress(ddev))
kobject_uevent(&pdev->kobj, KOBJ_ADD);
return p;
diff --git a/fs/quota/dquot.c b/fs/quota/dquot.c
index 607c579..70f36c0 100644
--- a/fs/quota/dquot.c
+++ b/fs/quota/dquot.c
@@ -2042,8 +2042,8 @@
* changes */
invalidate_bdev(sb->s_bdev);
}
- mutex_lock(&inode->i_mutex);
mutex_lock(&dqopt->dqonoff_mutex);
+ mutex_lock_nested(&inode->i_mutex, I_MUTEX_QUOTA);
if (sb_has_quota_loaded(sb, type)) {
error = -EBUSY;
goto out_lock;
@@ -2094,7 +2094,6 @@
dqopt->files[type] = NULL;
iput(inode);
out_lock:
- mutex_unlock(&dqopt->dqonoff_mutex);
if (oldflags != -1) {
down_write(&dqopt->dqptr_sem);
/* Set the flags back (in the case of accidental quotaon()
@@ -2104,6 +2103,7 @@
up_write(&dqopt->dqptr_sem);
}
mutex_unlock(&inode->i_mutex);
+ mutex_unlock(&dqopt->dqonoff_mutex);
out_fmt:
put_quota_format(fmt);
diff --git a/fs/reiserfs/journal.c b/fs/reiserfs/journal.c
index 77f5bb7..9062220 100644
--- a/fs/reiserfs/journal.c
+++ b/fs/reiserfs/journal.c
@@ -997,7 +997,7 @@
DEFINE_WAIT(wait);
struct reiserfs_journal *j = SB_JOURNAL(s);
if (atomic_read(&j->j_async_throttle))
- congestion_wait(WRITE, HZ / 10);
+ congestion_wait(BLK_RW_ASYNC, HZ / 10);
return 0;
}
diff --git a/fs/reiserfs/super.c b/fs/reiserfs/super.c
index d3aeb06..7adea74 100644
--- a/fs/reiserfs/super.c
+++ b/fs/reiserfs/super.c
@@ -24,7 +24,6 @@
#include <linux/exportfs.h>
#include <linux/quotaops.h>
#include <linux/vfs.h>
-#include <linux/mnt_namespace.h>
#include <linux/mount.h>
#include <linux/namei.h>
#include <linux/crc32.h>
diff --git a/fs/reiserfs/xattr.c b/fs/reiserfs/xattr.c
index f3d47d8..6925b83 100644
--- a/fs/reiserfs/xattr.c
+++ b/fs/reiserfs/xattr.c
@@ -46,7 +46,6 @@
#include <linux/reiserfs_acl.h>
#include <asm/uaccess.h>
#include <net/checksum.h>
-#include <linux/smp_lock.h>
#include <linux/stat.h>
#include <linux/quotaops.h>
diff --git a/fs/squashfs/super.c b/fs/squashfs/super.c
index 3b52770..cb5fc57 100644
--- a/fs/squashfs/super.c
+++ b/fs/squashfs/super.c
@@ -30,6 +30,7 @@
#include <linux/fs.h>
#include <linux/vfs.h>
#include <linux/slab.h>
+#include <linux/smp_lock.h>
#include <linux/mutex.h>
#include <linux/pagemap.h>
#include <linux/init.h>
diff --git a/fs/sync.c b/fs/sync.c
index dd20002..3422ba6 100644
--- a/fs/sync.c
+++ b/fs/sync.c
@@ -112,8 +112,13 @@
mutex_unlock(&mutex);
}
+/*
+ * sync everything. Start out by waking pdflush, because that writes back
+ * all queues in parallel.
+ */
SYSCALL_DEFINE0(sync)
{
+ wakeup_pdflush(0);
sync_filesystems(0);
sync_filesystems(1);
if (unlikely(laptop_mode))
diff --git a/fs/sysfs/bin.c b/fs/sysfs/bin.c
index 9345806..2524714 100644
--- a/fs/sysfs/bin.c
+++ b/fs/sysfs/bin.c
@@ -171,6 +171,7 @@
if (count > 0)
*off = offs + count;
+ kfree(temp);
return count;
}
diff --git a/fs/ubifs/io.c b/fs/ubifs/io.c
index bc58571..762a7d6 100644
--- a/fs/ubifs/io.c
+++ b/fs/ubifs/io.c
@@ -297,6 +297,7 @@
{
struct ubifs_wbuf *wbuf = container_of(timer, struct ubifs_wbuf, timer);
+ dbg_io("jhead %d", wbuf->jhead);
wbuf->need_sync = 1;
wbuf->c->need_wbuf_sync = 1;
ubifs_wake_up_bgt(wbuf->c);
@@ -311,8 +312,12 @@
{
ubifs_assert(!hrtimer_active(&wbuf->timer));
- if (!ktime_to_ns(wbuf->softlimit))
+ if (wbuf->no_timer)
return;
+ dbg_io("set timer for jhead %d, %llu-%llu millisecs", wbuf->jhead,
+ div_u64(ktime_to_ns(wbuf->softlimit), USEC_PER_SEC),
+ div_u64(ktime_to_ns(wbuf->softlimit) + wbuf->delta,
+ USEC_PER_SEC));
hrtimer_start_range_ns(&wbuf->timer, wbuf->softlimit, wbuf->delta,
HRTIMER_MODE_REL);
}
@@ -323,11 +328,8 @@
*/
static void cancel_wbuf_timer_nolock(struct ubifs_wbuf *wbuf)
{
- /*
- * If the syncer is waiting for the lock (from the background thread's
- * context) and another task is changing write-buffer then the syncing
- * should be canceled.
- */
+ if (wbuf->no_timer)
+ return;
wbuf->need_sync = 0;
hrtimer_cancel(&wbuf->timer);
}
@@ -349,8 +351,8 @@
/* Write-buffer is empty or not seeked */
return 0;
- dbg_io("LEB %d:%d, %d bytes",
- wbuf->lnum, wbuf->offs, wbuf->used);
+ dbg_io("LEB %d:%d, %d bytes, jhead %d",
+ wbuf->lnum, wbuf->offs, wbuf->used, wbuf->jhead);
ubifs_assert(!(c->vfs_sb->s_flags & MS_RDONLY));
ubifs_assert(!(wbuf->avail & 7));
ubifs_assert(wbuf->offs + c->min_io_size <= c->leb_size);
@@ -390,7 +392,7 @@
* @offs: logical eraseblock offset to seek to
* @dtype: data type
*
- * This function targets the write buffer to logical eraseblock @lnum:@offs.
+ * This function targets the write-buffer to logical eraseblock @lnum:@offs.
* The write-buffer is synchronized if it is not empty. Returns zero in case of
* success and a negative error code in case of failure.
*/
@@ -399,7 +401,7 @@
{
const struct ubifs_info *c = wbuf->c;
- dbg_io("LEB %d:%d", lnum, offs);
+ dbg_io("LEB %d:%d, jhead %d", lnum, offs, wbuf->jhead);
ubifs_assert(lnum >= 0 && lnum < c->leb_cnt);
ubifs_assert(offs >= 0 && offs <= c->leb_size);
ubifs_assert(offs % c->min_io_size == 0 && !(offs & 7));
@@ -506,9 +508,9 @@
struct ubifs_info *c = wbuf->c;
int err, written, n, aligned_len = ALIGN(len, 8), offs;
- dbg_io("%d bytes (%s) to wbuf at LEB %d:%d", len,
- dbg_ntype(((struct ubifs_ch *)buf)->node_type), wbuf->lnum,
- wbuf->offs + wbuf->used);
+ dbg_io("%d bytes (%s) to jhead %d wbuf at LEB %d:%d", len,
+ dbg_ntype(((struct ubifs_ch *)buf)->node_type), wbuf->jhead,
+ wbuf->lnum, wbuf->offs + wbuf->used);
ubifs_assert(len > 0 && wbuf->lnum >= 0 && wbuf->lnum < c->leb_cnt);
ubifs_assert(wbuf->offs >= 0 && wbuf->offs % c->min_io_size == 0);
ubifs_assert(!(wbuf->offs & 7) && wbuf->offs <= c->leb_size);
@@ -533,8 +535,8 @@
memcpy(wbuf->buf + wbuf->used, buf, len);
if (aligned_len == wbuf->avail) {
- dbg_io("flush wbuf to LEB %d:%d", wbuf->lnum,
- wbuf->offs);
+ dbg_io("flush jhead %d wbuf to LEB %d:%d",
+ wbuf->jhead, wbuf->lnum, wbuf->offs);
err = ubi_leb_write(c->ubi, wbuf->lnum, wbuf->buf,
wbuf->offs, c->min_io_size,
wbuf->dtype);
@@ -562,7 +564,8 @@
* minimal I/O unit. We have to fill and flush write-buffer and switch
* to the next min. I/O unit.
*/
- dbg_io("flush wbuf to LEB %d:%d", wbuf->lnum, wbuf->offs);
+ dbg_io("flush jhead %d wbuf to LEB %d:%d",
+ wbuf->jhead, wbuf->lnum, wbuf->offs);
memcpy(wbuf->buf + wbuf->used, buf, wbuf->avail);
err = ubi_leb_write(c->ubi, wbuf->lnum, wbuf->buf, wbuf->offs,
c->min_io_size, wbuf->dtype);
@@ -695,7 +698,8 @@
int err, rlen, overlap;
struct ubifs_ch *ch = buf;
- dbg_io("LEB %d:%d, %s, length %d", lnum, offs, dbg_ntype(type), len);
+ dbg_io("LEB %d:%d, %s, length %d, jhead %d", lnum, offs,
+ dbg_ntype(type), len, wbuf->jhead);
ubifs_assert(wbuf && lnum >= 0 && lnum < c->leb_cnt && offs >= 0);
ubifs_assert(!(offs & 7) && offs < c->leb_size);
ubifs_assert(type >= 0 && type < UBIFS_NODE_TYPES_CNT);
@@ -819,13 +823,12 @@
* @c: UBIFS file-system description object
* @wbuf: write-buffer to initialize
*
- * This function initializes write buffer. Returns zero in case of success
+ * This function initializes write-buffer. Returns zero in case of success
* %-ENOMEM in case of failure.
*/
int ubifs_wbuf_init(struct ubifs_info *c, struct ubifs_wbuf *wbuf)
{
size_t size;
- ktime_t hardlimit;
wbuf->buf = kmalloc(c->min_io_size, GFP_KERNEL);
if (!wbuf->buf)
@@ -851,22 +854,16 @@
hrtimer_init(&wbuf->timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
wbuf->timer.function = wbuf_timer_callback_nolock;
- /*
- * Make write-buffer soft limit to be 20% of the hard limit. The
- * write-buffer timer is allowed to expire any time between the soft
- * and hard limits.
- */
- hardlimit = ktime_set(DEFAULT_WBUF_TIMEOUT_SECS, 0);
- wbuf->delta = (DEFAULT_WBUF_TIMEOUT_SECS * NSEC_PER_SEC) * 2 / 10;
- wbuf->softlimit = ktime_sub_ns(hardlimit, wbuf->delta);
- hrtimer_set_expires_range_ns(&wbuf->timer, wbuf->softlimit,
- wbuf->delta);
+ wbuf->softlimit = ktime_set(WBUF_TIMEOUT_SOFTLIMIT, 0);
+ wbuf->delta = WBUF_TIMEOUT_HARDLIMIT - WBUF_TIMEOUT_SOFTLIMIT;
+ wbuf->delta *= 1000000000ULL;
+ ubifs_assert(wbuf->delta <= ULONG_MAX);
return 0;
}
/**
* ubifs_wbuf_add_ino_nolock - add an inode number into the wbuf inode array.
- * @wbuf: the write-buffer whereto add
+ * @wbuf: the write-buffer where to add
* @inum: the inode number
*
* This function adds an inode number to the inode array of the write-buffer.
diff --git a/fs/ubifs/ioctl.c b/fs/ubifs/ioctl.c
index 6db7a6b..8aacd64 100644
--- a/fs/ubifs/ioctl.c
+++ b/fs/ubifs/ioctl.c
@@ -25,7 +25,6 @@
/* This file implements EXT2-compatible extended attribute ioctl() calls */
#include <linux/compat.h>
-#include <linux/smp_lock.h>
#include <linux/mount.h>
#include "ubifs.h"
diff --git a/fs/ubifs/recovery.c b/fs/ubifs/recovery.c
index 8056052..e5f6cf8 100644
--- a/fs/ubifs/recovery.c
+++ b/fs/ubifs/recovery.c
@@ -53,6 +53,25 @@
}
/**
+ * first_non_ff - find offset of the first non-0xff byte.
+ * @buf: buffer to search in
+ * @len: length of buffer
+ *
+ * This function returns offset of the first non-0xff byte in @buf or %-1 if
+ * the buffer contains only 0xff bytes.
+ */
+static int first_non_ff(void *buf, int len)
+{
+ uint8_t *p = buf;
+ int i;
+
+ for (i = 0; i < len; i++)
+ if (*p++ != 0xff)
+ return i;
+ return -1;
+}
+
+/**
* get_master_node - get the last valid master node allowing for corruption.
* @c: UBIFS file-system description object
* @lnum: LEB number
@@ -357,11 +376,7 @@
empty_offs = ALIGN(offs + 1, c->min_io_size);
check_len = c->leb_size - empty_offs;
p = buf + empty_offs - offs;
-
- for (; check_len > 0; check_len--)
- if (*p++ != 0xff)
- return 0;
- return 1;
+ return is_empty(p, check_len);
}
/**
@@ -543,8 +558,8 @@
*
* This function does a scan of a LEB, but caters for errors that might have
* been caused by the unclean unmount from which we are attempting to recover.
- *
- * This function returns %0 on success and a negative error code on failure.
+ * Returns %0 in case of success, %-EUCLEAN if an unrecoverable corruption is
+ * found, and a negative error code in case of failure.
*/
struct ubifs_scan_leb *ubifs_recover_leb(struct ubifs_info *c, int lnum,
int offs, void *sbuf, int grouped)
@@ -643,7 +658,8 @@
goto corrupted;
default:
dbg_err("unknown");
- goto corrupted;
+ err = -EINVAL;
+ goto error;
}
}
@@ -652,8 +668,13 @@
clean_buf(c, &buf, lnum, &offs, &len);
need_clean = 1;
} else {
- ubifs_err("corrupt empty space at LEB %d:%d",
- lnum, offs);
+ int corruption = first_non_ff(buf, len);
+
+ ubifs_err("corrupt empty space LEB %d:%d, corruption "
+ "starts at %d", lnum, offs, corruption);
+ /* Make sure we dump interesting non-0xFF data */
+ offs = corruption;
+ buf += corruption;
goto corrupted;
}
}
@@ -813,7 +834,7 @@
static int recover_head(const struct ubifs_info *c, int lnum, int offs,
void *sbuf)
{
- int len, err, need_clean = 0;
+ int len, err;
if (c->min_io_size > 1)
len = c->min_io_size;
@@ -827,19 +848,7 @@
/* Read at the head location and check it is empty flash */
err = ubi_read(c->ubi, lnum, sbuf, offs, len);
- if (err)
- need_clean = 1;
- else {
- uint8_t *p = sbuf;
-
- while (len--)
- if (*p++ != 0xff) {
- need_clean = 1;
- break;
- }
- }
-
- if (need_clean) {
+ if (err || !is_empty(sbuf, len)) {
dbg_rcvry("cleaning head at %d:%d", lnum, offs);
if (offs == 0)
return ubifs_leb_unmap(c, lnum);
diff --git a/fs/ubifs/replay.c b/fs/ubifs/replay.c
index 11cc801..2970500 100644
--- a/fs/ubifs/replay.c
+++ b/fs/ubifs/replay.c
@@ -837,9 +837,10 @@
dbg_mnt("replay log LEB %d:%d", lnum, offs);
sleb = ubifs_scan(c, lnum, offs, sbuf);
- if (IS_ERR(sleb)) {
- if (c->need_recovery)
- sleb = ubifs_recover_log_leb(c, lnum, offs, sbuf);
+ if (IS_ERR(sleb) ) {
+ if (PTR_ERR(sleb) != -EUCLEAN || !c->need_recovery)
+ return PTR_ERR(sleb);
+ sleb = ubifs_recover_log_leb(c, lnum, offs, sbuf);
if (IS_ERR(sleb))
return PTR_ERR(sleb);
}
@@ -957,7 +958,7 @@
return err;
out_dump:
- ubifs_err("log error detected while replying the log at LEB %d:%d",
+ ubifs_err("log error detected while replaying the log at LEB %d:%d",
lnum, offs + snod->offs);
dbg_dump_node(c, snod->node);
ubifs_scan_destroy(sleb);
diff --git a/fs/ubifs/scan.c b/fs/ubifs/scan.c
index 0ed8247..892ebfe 100644
--- a/fs/ubifs/scan.c
+++ b/fs/ubifs/scan.c
@@ -238,12 +238,12 @@
{
int len;
- ubifs_err("corrupted data at LEB %d:%d", lnum, offs);
+ ubifs_err("corruption at LEB %d:%d", lnum, offs);
if (dbg_failure_mode)
return;
len = c->leb_size - offs;
- if (len > 4096)
- len = 4096;
+ if (len > 8192)
+ len = 8192;
dbg_err("first %d bytes from LEB %d:%d", len, lnum, offs);
print_hex_dump(KERN_DEBUG, "", DUMP_PREFIX_OFFSET, 32, 4, buf, len, 1);
}
@@ -256,7 +256,9 @@
* @sbuf: scan buffer (must be c->leb_size)
*
* This function scans LEB number @lnum and returns complete information about
- * its contents. Returns an error code in case of failure.
+ * its contents. Returns the scaned information in case of success and,
+ * %-EUCLEAN if the LEB neads recovery, and other negative error codes in case
+ * of failure.
*/
struct ubifs_scan_leb *ubifs_scan(const struct ubifs_info *c, int lnum,
int offs, void *sbuf)
@@ -279,7 +281,6 @@
cond_resched();
ret = ubifs_scan_a_node(c, buf, len, lnum, offs, 0);
-
if (ret > 0) {
/* Padding bytes or a valid padding node */
offs += ret;
@@ -304,7 +305,8 @@
goto corrupted;
default:
dbg_err("unknown");
- goto corrupted;
+ err = -EINVAL;
+ goto error;
}
err = ubifs_add_snod(c, sleb, buf, offs);
@@ -317,8 +319,10 @@
len -= node_len;
}
- if (offs % c->min_io_size)
- goto corrupted;
+ if (offs % c->min_io_size) {
+ ubifs_err("empty space starts at non-aligned offset %d", offs);
+ goto corrupted;;
+ }
ubifs_end_scan(c, sleb, lnum, offs);
diff --git a/fs/ubifs/super.c b/fs/ubifs/super.c
index 79fad43..26d2e0d 100644
--- a/fs/ubifs/super.c
+++ b/fs/ubifs/super.c
@@ -797,7 +797,7 @@
* does not need to be synchronized by timer.
*/
c->jheads[GCHD].wbuf.dtype = UBI_LONGTERM;
- c->jheads[GCHD].wbuf.softlimit = ktime_set(0, 0);
+ c->jheads[GCHD].wbuf.no_timer = 1;
return 0;
}
@@ -986,7 +986,7 @@
switch (token) {
/*
* %Opt_fast_unmount and %Opt_norm_unmount options are ignored.
- * We accepte them in order to be backware-compatible. But this
+ * We accept them in order to be backward-compatible. But this
* should be removed at some point.
*/
case Opt_fast_unmount:
@@ -1287,6 +1287,9 @@
if (err)
goto out_journal;
+ /* Calculate 'min_idx_lebs' after journal replay */
+ c->min_idx_lebs = ubifs_calc_min_idx_lebs(c);
+
err = ubifs_mount_orphans(c, c->need_recovery, mounted_read_only);
if (err)
goto out_orphans;
@@ -1754,10 +1757,8 @@
/* Synchronize write-buffers */
if (c->jheads)
- for (i = 0; i < c->jhead_cnt; i++) {
+ for (i = 0; i < c->jhead_cnt; i++)
ubifs_wbuf_sync(&c->jheads[i].wbuf);
- hrtimer_cancel(&c->jheads[i].wbuf.timer);
- }
/*
* On fatal errors c->ro_media is set to 1, in which case we do
@@ -1975,7 +1976,8 @@
err = bdi_init(&c->bdi);
if (err)
goto out_close;
- err = bdi_register(&c->bdi, NULL, "ubifs");
+ err = bdi_register(&c->bdi, NULL, "ubifs_%d_%d",
+ c->vi.ubi_num, c->vi.vol_id);
if (err)
goto out_bdi;
diff --git a/fs/ubifs/ubifs.h b/fs/ubifs/ubifs.h
index 1bf01d8..a293490 100644
--- a/fs/ubifs/ubifs.h
+++ b/fs/ubifs/ubifs.h
@@ -95,8 +95,9 @@
*/
#define BGT_NAME_PATTERN "ubifs_bgt%d_%d"
-/* Default write-buffer synchronization timeout in seconds */
-#define DEFAULT_WBUF_TIMEOUT_SECS 5
+/* Write-buffer synchronization timeout interval in seconds */
+#define WBUF_TIMEOUT_SOFTLIMIT 3
+#define WBUF_TIMEOUT_HARDLIMIT 5
/* Maximum possible inode number (only 32-bit inodes are supported now) */
#define MAX_INUM 0xFFFFFFFF
@@ -654,7 +655,8 @@
* @delta: hard and soft timeouts delta (the timer expire inteval is @softlimit
* and @softlimit + @delta)
* @timer: write-buffer timer
- * @need_sync: it is set if its timer expired and needs sync
+ * @no_timer: non-zero if this write-buffer does not have a timer
+ * @need_sync: non-zero if the timer expired and the wbuf needs sync'ing
* @next_ino: points to the next position of the following inode number
* @inodes: stores the inode numbers of the nodes which are in wbuf
*
@@ -683,7 +685,8 @@
ktime_t softlimit;
unsigned long long delta;
struct hrtimer timer;
- int need_sync;
+ unsigned int no_timer:1;
+ unsigned int need_sync:1;
int next_ino;
ino_t *inodes;
};
diff --git a/fs/xfs/linux-2.6/kmem.c b/fs/xfs/linux-2.6/kmem.c
index 1cd3b55..2d3f90a 100644
--- a/fs/xfs/linux-2.6/kmem.c
+++ b/fs/xfs/linux-2.6/kmem.c
@@ -53,7 +53,7 @@
printk(KERN_ERR "XFS: possible memory allocation "
"deadlock in %s (mode:0x%x)\n",
__func__, lflags);
- congestion_wait(WRITE, HZ/50);
+ congestion_wait(BLK_RW_ASYNC, HZ/50);
} while (1);
}
@@ -130,7 +130,7 @@
printk(KERN_ERR "XFS: possible memory allocation "
"deadlock in %s (mode:0x%x)\n",
__func__, lflags);
- congestion_wait(WRITE, HZ/50);
+ congestion_wait(BLK_RW_ASYNC, HZ/50);
} while (1);
}
diff --git a/fs/xfs/linux-2.6/xfs_buf.c b/fs/xfs/linux-2.6/xfs_buf.c
index 1418b91..0c93c7e 100644
--- a/fs/xfs/linux-2.6/xfs_buf.c
+++ b/fs/xfs/linux-2.6/xfs_buf.c
@@ -412,7 +412,7 @@
XFS_STATS_INC(xb_page_retries);
xfsbufd_wakeup(0, gfp_mask);
- congestion_wait(WRITE, HZ/50);
+ congestion_wait(BLK_RW_ASYNC, HZ/50);
goto retry;
}
diff --git a/fs/xfs/linux-2.6/xfs_file.c b/fs/xfs/linux-2.6/xfs_file.c
index f4e2554..0542fd5 100644
--- a/fs/xfs/linux-2.6/xfs_file.c
+++ b/fs/xfs/linux-2.6/xfs_file.c
@@ -41,7 +41,6 @@
#include "xfs_ioctl.h"
#include <linux/dcache.h>
-#include <linux/smp_lock.h>
static struct vm_operations_struct xfs_file_vm_ops;
diff --git a/include/asm-generic/percpu.h b/include/asm-generic/percpu.h
index d7d50d7..aa00800 100644
--- a/include/asm-generic/percpu.h
+++ b/include/asm-generic/percpu.h
@@ -97,4 +97,8 @@
#define PER_CPU_ATTRIBUTES
#endif
+#ifndef PER_CPU_DEF_ATTRIBUTES
+#define PER_CPU_DEF_ATTRIBUTES
+#endif
+
#endif /* _ASM_GENERIC_PERCPU_H_ */
diff --git a/include/asm-generic/vmlinux.lds.h b/include/asm-generic/vmlinux.lds.h
index 92b73b6..a553f10 100644
--- a/include/asm-generic/vmlinux.lds.h
+++ b/include/asm-generic/vmlinux.lds.h
@@ -191,7 +191,7 @@
. = ALIGN(align); \
*(.data.cacheline_aligned)
-#define INIT_TASK(align) \
+#define INIT_TASK_DATA(align) \
. = ALIGN(align); \
*(.data.init_task)
@@ -434,14 +434,15 @@
/*
* Init task
*/
-#define INIT_TASK_DATA(align) \
+#define INIT_TASK_DATA_SECTION(align) \
. = ALIGN(align); \
.data.init_task : { \
- INIT_TASK \
+ INIT_TASK_DATA(align) \
}
#ifdef CONFIG_CONSTRUCTORS
-#define KERNEL_CTORS() VMLINUX_SYMBOL(__ctors_start) = .; \
+#define KERNEL_CTORS() . = ALIGN(8); \
+ VMLINUX_SYMBOL(__ctors_start) = .; \
*(.ctors) \
VMLINUX_SYMBOL(__ctors_end) = .;
#else
@@ -704,15 +705,15 @@
* matches the requirment of PAGE_ALIGNED_DATA.
*
* use 0 as page_align if page_aligned data is not used */
-#define RW_DATA_SECTION(cacheline, nosave, pagealigned, inittask) \
+#define RW_DATA_SECTION(cacheline, pagealigned, inittask) \
. = ALIGN(PAGE_SIZE); \
.data : AT(ADDR(.data) - LOAD_OFFSET) { \
- INIT_TASK(inittask) \
+ INIT_TASK_DATA(inittask) \
CACHELINE_ALIGNED_DATA(cacheline) \
READ_MOSTLY_DATA(cacheline) \
DATA_DATA \
CONSTRUCTORS \
- NOSAVE_DATA(nosave) \
+ NOSAVE_DATA \
PAGE_ALIGNED_DATA(pagealigned) \
}
diff --git a/include/drm/drm_edid.h b/include/drm/drm_edid.h
index c263e4d..7d6c9a2 100644
--- a/include/drm/drm_edid.h
+++ b/include/drm/drm_edid.h
@@ -35,11 +35,11 @@
} __attribute__((packed));
/* 00=16:10, 01=4:3, 10=5:4, 11=16:9 */
-#define EDID_TIMING_ASPECT_SHIFT 0
+#define EDID_TIMING_ASPECT_SHIFT 6
#define EDID_TIMING_ASPECT_MASK (0x3 << EDID_TIMING_ASPECT_SHIFT)
/* need to add 60 */
-#define EDID_TIMING_VFREQ_SHIFT 2
+#define EDID_TIMING_VFREQ_SHIFT 0
#define EDID_TIMING_VFREQ_MASK (0x3f << EDID_TIMING_VFREQ_SHIFT)
struct std_timing {
@@ -47,11 +47,11 @@
u8 vfreq_aspect;
} __attribute__((packed));
-#define DRM_EDID_PT_HSYNC_POSITIVE (1 << 6)
-#define DRM_EDID_PT_VSYNC_POSITIVE (1 << 5)
+#define DRM_EDID_PT_HSYNC_POSITIVE (1 << 1)
+#define DRM_EDID_PT_VSYNC_POSITIVE (1 << 2)
#define DRM_EDID_PT_SEPARATE_SYNC (3 << 3)
-#define DRM_EDID_PT_STEREO (1 << 2)
-#define DRM_EDID_PT_INTERLACED (1 << 1)
+#define DRM_EDID_PT_STEREO (1 << 5)
+#define DRM_EDID_PT_INTERLACED (1 << 7)
/* If detailed data is pixel timing */
struct detailed_pixel_timing {
@@ -93,7 +93,7 @@
} __attribute__((packed));
struct detailed_data_wpindex {
- u8 white_xy_lo; /* Upper 2 bits each */
+ u8 white_yx_lo; /* Lower 2 bits each */
u8 white_x_hi;
u8 white_y_hi;
u8 gamma; /* need to divide by 100 then add 1 */
@@ -135,21 +135,21 @@
} data;
} __attribute__((packed));
-#define DRM_EDID_INPUT_SERRATION_VSYNC (1 << 7)
-#define DRM_EDID_INPUT_SYNC_ON_GREEN (1 << 5)
-#define DRM_EDID_INPUT_COMPOSITE_SYNC (1 << 4)
+#define DRM_EDID_INPUT_SERRATION_VSYNC (1 << 0)
+#define DRM_EDID_INPUT_SYNC_ON_GREEN (1 << 1)
+#define DRM_EDID_INPUT_COMPOSITE_SYNC (1 << 2)
#define DRM_EDID_INPUT_SEPARATE_SYNCS (1 << 3)
-#define DRM_EDID_INPUT_BLANK_TO_BLACK (1 << 2)
-#define DRM_EDID_INPUT_VIDEO_LEVEL (3 << 1)
-#define DRM_EDID_INPUT_DIGITAL (1 << 0) /* bits above must be zero if set */
+#define DRM_EDID_INPUT_BLANK_TO_BLACK (1 << 4)
+#define DRM_EDID_INPUT_VIDEO_LEVEL (3 << 5)
+#define DRM_EDID_INPUT_DIGITAL (1 << 7) /* bits below must be zero if set */
-#define DRM_EDID_FEATURE_DEFAULT_GTF (1 << 7)
-#define DRM_EDID_FEATURE_PREFERRED_TIMING (1 << 6)
-#define DRM_EDID_FEATURE_STANDARD_COLOR (1 << 5)
+#define DRM_EDID_FEATURE_DEFAULT_GTF (1 << 0)
+#define DRM_EDID_FEATURE_PREFERRED_TIMING (1 << 1)
+#define DRM_EDID_FEATURE_STANDARD_COLOR (1 << 2)
#define DRM_EDID_FEATURE_DISPLAY_TYPE (3 << 3) /* 00=mono, 01=rgb, 10=non-rgb, 11=unknown */
-#define DRM_EDID_FEATURE_PM_ACTIVE_OFF (1 << 2)
-#define DRM_EDID_FEATURE_PM_SUSPEND (1 << 1)
-#define DRM_EDID_FEATURE_PM_STANDBY (1 << 0)
+#define DRM_EDID_FEATURE_PM_ACTIVE_OFF (1 << 5)
+#define DRM_EDID_FEATURE_PM_SUSPEND (1 << 6)
+#define DRM_EDID_FEATURE_PM_STANDBY (1 << 7)
struct edid {
u8 header[8];
diff --git a/include/linux/aio.h b/include/linux/aio.h
index b16a957..47f7d93 100644
--- a/include/linux/aio.h
+++ b/include/linux/aio.h
@@ -121,9 +121,9 @@
/*
* If the aio_resfd field of the userspace iocb is not zero,
- * this is the underlying file* to deliver event to.
+ * this is the underlying eventfd context to deliver events to.
*/
- struct file *ki_eventfd;
+ struct eventfd_ctx *ki_eventfd;
};
#define is_sync_kiocb(iocb) ((iocb)->ki_key == KIOCB_SYNC_KEY)
diff --git a/include/linux/backing-dev.h b/include/linux/backing-dev.h
index 0ec2c59..1d52425 100644
--- a/include/linux/backing-dev.h
+++ b/include/linux/backing-dev.h
@@ -229,9 +229,14 @@
(1 << BDI_async_congested));
}
-void clear_bdi_congested(struct backing_dev_info *bdi, int rw);
-void set_bdi_congested(struct backing_dev_info *bdi, int rw);
-long congestion_wait(int rw, long timeout);
+enum {
+ BLK_RW_ASYNC = 0,
+ BLK_RW_SYNC = 1,
+};
+
+void clear_bdi_congested(struct backing_dev_info *bdi, int sync);
+void set_bdi_congested(struct backing_dev_info *bdi, int sync);
+long congestion_wait(int sync, long timeout);
static inline bool bdi_cap_writeback_dirty(struct backing_dev_info *bdi)
diff --git a/include/linux/bio.h b/include/linux/bio.h
index 2a04eb5..2892b710 100644
--- a/include/linux/bio.h
+++ b/include/linux/bio.h
@@ -319,7 +319,6 @@
*/
struct bio_integrity_payload {
struct bio *bip_bio; /* parent bio */
- struct bio_vec *bip_vec; /* integrity data vector */
sector_t bip_sector; /* virtual start sector */
@@ -328,11 +327,12 @@
unsigned int bip_size;
- unsigned short bip_pool; /* pool the ivec came from */
+ unsigned short bip_slab; /* slab the bip came from */
unsigned short bip_vcnt; /* # of integrity bio_vecs */
unsigned short bip_idx; /* current bip_vec index */
struct work_struct bip_work; /* I/O completion */
+ struct bio_vec bip_vec[0]; /* embedded bvec array */
};
#endif /* CONFIG_BLK_DEV_INTEGRITY */
@@ -430,6 +430,9 @@
unsigned int front_pad;
mempool_t *bio_pool;
+#if defined(CONFIG_BLK_DEV_INTEGRITY)
+ mempool_t *bio_integrity_pool;
+#endif
mempool_t *bvec_pool;
};
@@ -634,8 +637,9 @@
#define bio_integrity(bio) (bio->bi_integrity != NULL)
+extern struct bio_integrity_payload *bio_integrity_alloc_bioset(struct bio *, gfp_t, unsigned int, struct bio_set *);
extern struct bio_integrity_payload *bio_integrity_alloc(struct bio *, gfp_t, unsigned int);
-extern void bio_integrity_free(struct bio *);
+extern void bio_integrity_free(struct bio *, struct bio_set *);
extern int bio_integrity_add_page(struct bio *, struct page *, unsigned int, unsigned int);
extern int bio_integrity_enabled(struct bio *bio);
extern int bio_integrity_set_tag(struct bio *, void *, unsigned int);
@@ -645,21 +649,27 @@
extern void bio_integrity_advance(struct bio *, unsigned int);
extern void bio_integrity_trim(struct bio *, unsigned int, unsigned int);
extern void bio_integrity_split(struct bio *, struct bio_pair *, int);
-extern int bio_integrity_clone(struct bio *, struct bio *, gfp_t);
+extern int bio_integrity_clone(struct bio *, struct bio *, gfp_t, struct bio_set *);
+extern int bioset_integrity_create(struct bio_set *, int);
+extern void bioset_integrity_free(struct bio_set *);
+extern void bio_integrity_init(void);
#else /* CONFIG_BLK_DEV_INTEGRITY */
#define bio_integrity(a) (0)
+#define bioset_integrity_create(a, b) (0)
#define bio_integrity_prep(a) (0)
#define bio_integrity_enabled(a) (0)
-#define bio_integrity_clone(a, b, c) (0)
-#define bio_integrity_free(a) do { } while (0)
+#define bio_integrity_clone(a, b, c, d) (0)
+#define bioset_integrity_free(a) do { } while (0)
+#define bio_integrity_free(a, b) do { } while (0)
#define bio_integrity_endio(a, b) do { } while (0)
#define bio_integrity_advance(a, b) do { } while (0)
#define bio_integrity_trim(a, b, c) do { } while (0)
#define bio_integrity_split(a, b, c) do { } while (0)
#define bio_integrity_set_tag(a, b, c) do { } while (0)
#define bio_integrity_get_tag(a, b, c) do { } while (0)
+#define bio_integrity_init(a) do { } while (0)
#endif /* CONFIG_BLK_DEV_INTEGRITY */
diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h
index 8963d91..e7cb5db 100644
--- a/include/linux/blkdev.h
+++ b/include/linux/blkdev.h
@@ -70,11 +70,6 @@
REQ_TYPE_ATA_PC,
};
-enum {
- BLK_RW_ASYNC = 0,
- BLK_RW_SYNC = 1,
-};
-
/*
* For request of type REQ_TYPE_LINUX_BLOCK, rq->cmd[0] is the opcode being
* sent down (similar to how REQ_TYPE_BLOCK_PC means that ->cmd[] holds a
@@ -301,12 +296,6 @@
#define BLK_SCSI_MAX_CMDS (256)
#define BLK_SCSI_CMD_PER_LONG (BLK_SCSI_MAX_CMDS / (sizeof(long) * 8))
-struct blk_cmd_filter {
- unsigned long read_ok[BLK_SCSI_CMD_PER_LONG];
- unsigned long write_ok[BLK_SCSI_CMD_PER_LONG];
- struct kobject kobj;
-};
-
struct queue_limits {
unsigned long bounce_pfn;
unsigned long seg_boundary_mask;
@@ -445,7 +434,6 @@
#if defined(CONFIG_BLK_DEV_BSG)
struct bsg_class_device bsg_dev;
#endif
- struct blk_cmd_filter cmd_filter;
};
#define QUEUE_FLAG_CLUSTER 0 /* cluster several segments into 1 */
@@ -730,6 +718,7 @@
int nr_entries;
unsigned long offset;
int null_mapped;
+ int from_user;
};
struct req_iterator {
@@ -786,18 +775,18 @@
* congested queues, and wake up anyone who was waiting for requests to be
* put back.
*/
-static inline void blk_clear_queue_congested(struct request_queue *q, int rw)
+static inline void blk_clear_queue_congested(struct request_queue *q, int sync)
{
- clear_bdi_congested(&q->backing_dev_info, rw);
+ clear_bdi_congested(&q->backing_dev_info, sync);
}
/*
* A queue has just entered congestion. Flag that in the queue's VM-visible
* state flags and increment the global gounter of congested queues.
*/
-static inline void blk_set_queue_congested(struct request_queue *q, int rw)
+static inline void blk_set_queue_congested(struct request_queue *q, int sync)
{
- set_bdi_congested(&q->backing_dev_info, rw);
+ set_bdi_congested(&q->backing_dev_info, sync);
}
extern void blk_start_queue(struct request_queue *q);
@@ -998,13 +987,7 @@
return blkdev_issue_discard(sb->s_bdev, block, nr_blocks, GFP_KERNEL);
}
-/*
-* command filter functions
-*/
-extern int blk_verify_command(struct blk_cmd_filter *filter,
- unsigned char *cmd, fmode_t has_write_perm);
-extern void blk_unregister_filter(struct gendisk *disk);
-extern void blk_set_cmd_filter_defaults(struct blk_cmd_filter *filter);
+extern int blk_verify_command(unsigned char *cmd, fmode_t has_write_perm);
#define MAX_PHYS_SEGMENTS 128
#define MAX_HW_SEGMENTS 128
diff --git a/include/linux/crash_dump.h b/include/linux/crash_dump.h
index 2dac064..0026f26 100644
--- a/include/linux/crash_dump.h
+++ b/include/linux/crash_dump.h
@@ -3,7 +3,6 @@
#ifdef CONFIG_CRASH_DUMP
#include <linux/kexec.h>
-#include <linux/smp_lock.h>
#include <linux/device.h>
#include <linux/proc_fs.h>
diff --git a/include/linux/device.h b/include/linux/device.h
index ed4e39f..aebb810 100644
--- a/include/linux/device.h
+++ b/include/linux/device.h
@@ -25,8 +25,6 @@
#include <asm/atomic.h>
#include <asm/device.h>
-#define BUS_ID_SIZE 20
-
struct device;
struct device_private;
struct device_driver;
diff --git a/include/linux/elfcore.h b/include/linux/elfcore.h
index 7605c5e..00d6a68 100644
--- a/include/linux/elfcore.h
+++ b/include/linux/elfcore.h
@@ -122,9 +122,10 @@
static inline int elf_core_copy_task_regs(struct task_struct *t, elf_gregset_t* elfregs)
{
-#ifdef ELF_CORE_COPY_TASK_REGS
-
+#if defined (ELF_CORE_COPY_TASK_REGS)
return ELF_CORE_COPY_TASK_REGS(t, elfregs);
+#elif defined (task_pt_regs)
+ elf_core_copy_regs(elfregs, task_pt_regs(t));
#endif
return 0;
}
diff --git a/include/linux/eventfd.h b/include/linux/eventfd.h
index f45a8ae..3b85ba6 100644
--- a/include/linux/eventfd.h
+++ b/include/linux/eventfd.h
@@ -8,10 +8,8 @@
#ifndef _LINUX_EVENTFD_H
#define _LINUX_EVENTFD_H
-#ifdef CONFIG_EVENTFD
-
-/* For O_CLOEXEC and O_NONBLOCK */
#include <linux/fcntl.h>
+#include <linux/file.h>
/*
* CAREFUL: Check include/asm-generic/fcntl.h when defining
@@ -27,16 +25,37 @@
#define EFD_SHARED_FCNTL_FLAGS (O_CLOEXEC | O_NONBLOCK)
#define EFD_FLAGS_SET (EFD_SHARED_FCNTL_FLAGS | EFD_SEMAPHORE)
+#ifdef CONFIG_EVENTFD
+
+struct eventfd_ctx *eventfd_ctx_get(struct eventfd_ctx *ctx);
+void eventfd_ctx_put(struct eventfd_ctx *ctx);
struct file *eventfd_fget(int fd);
-int eventfd_signal(struct file *file, int n);
+struct eventfd_ctx *eventfd_ctx_fdget(int fd);
+struct eventfd_ctx *eventfd_ctx_fileget(struct file *file);
+int eventfd_signal(struct eventfd_ctx *ctx, int n);
#else /* CONFIG_EVENTFD */
-#define eventfd_fget(fd) ERR_PTR(-ENOSYS)
-static inline int eventfd_signal(struct file *file, int n)
-{ return 0; }
+/*
+ * Ugly ugly ugly error layer to support modules that uses eventfd but
+ * pretend to work in !CONFIG_EVENTFD configurations. Namely, AIO.
+ */
+static inline struct eventfd_ctx *eventfd_ctx_fdget(int fd)
+{
+ return ERR_PTR(-ENOSYS);
+}
-#endif /* CONFIG_EVENTFD */
+static inline int eventfd_signal(struct eventfd_ctx *ctx, int n)
+{
+ return -ENOSYS;
+}
+
+static inline void eventfd_ctx_put(struct eventfd_ctx *ctx)
+{
+
+}
+
+#endif
#endif /* _LINUX_EVENTFD_H */
diff --git a/include/linux/fb.h b/include/linux/fb.h
index dd68358..f847df9 100644
--- a/include/linux/fb.h
+++ b/include/linux/fb.h
@@ -819,6 +819,7 @@
int node;
int flags;
struct mutex lock; /* Lock for open/release/ioctl funcs */
+ struct mutex mm_lock; /* Lock for fb_mmap and smem_* fields */
struct fb_var_screeninfo var; /* Current var */
struct fb_fix_screeninfo fix; /* Current fix */
struct fb_monspecs monspecs; /* Current Monitor specs */
diff --git a/include/linux/firewire.h b/include/linux/firewire.h
index 9823946..192d1e43 100644
--- a/include/linux/firewire.h
+++ b/include/linux/firewire.h
@@ -127,6 +127,7 @@
struct delayed_work work;
int bm_retries;
int bm_generation;
+ __be32 bm_transaction_data[2];
bool broadcast_channel_allocated;
u32 broadcast_channel;
diff --git a/include/linux/fsnotify_backend.h b/include/linux/fsnotify_backend.h
index 44848aa..6c3de99 100644
--- a/include/linux/fsnotify_backend.h
+++ b/include/linux/fsnotify_backend.h
@@ -280,7 +280,7 @@
assert_spin_locked(&dentry->d_lock);
parent = dentry->d_parent;
- if (fsnotify_inode_watches_children(parent->d_inode))
+ if (parent->d_inode && fsnotify_inode_watches_children(parent->d_inode))
dentry->d_flags |= DCACHE_FSNOTIFY_PARENT_WATCHED;
else
dentry->d_flags &= ~DCACHE_FSNOTIFY_PARENT_WATCHED;
diff --git a/include/linux/fuse.h b/include/linux/fuse.h
index d41ed59..cf593bf 100644
--- a/include/linux/fuse.h
+++ b/include/linux/fuse.h
@@ -25,6 +25,11 @@
* - add IOCTL message
* - add unsolicited notification support
* - add POLL message and NOTIFY_POLL notification
+ *
+ * 7.12
+ * - add umask flag to input argument of open, mknod and mkdir
+ * - add notification messages for invalidation of inodes and
+ * directory entries
*/
#ifndef _LINUX_FUSE_H
@@ -36,7 +41,7 @@
#define FUSE_KERNEL_VERSION 7
/** Minor version number of this interface */
-#define FUSE_KERNEL_MINOR_VERSION 11
+#define FUSE_KERNEL_MINOR_VERSION 12
/** The node ID of the root inode */
#define FUSE_ROOT_ID 1
@@ -112,6 +117,7 @@
* INIT request/reply flags
*
* FUSE_EXPORT_SUPPORT: filesystem handles lookups of "." and ".."
+ * FUSE_DONT_MASK: don't apply umask to file mode on create operations
*/
#define FUSE_ASYNC_READ (1 << 0)
#define FUSE_POSIX_LOCKS (1 << 1)
@@ -119,6 +125,7 @@
#define FUSE_ATOMIC_O_TRUNC (1 << 3)
#define FUSE_EXPORT_SUPPORT (1 << 4)
#define FUSE_BIG_WRITES (1 << 5)
+#define FUSE_DONT_MASK (1 << 6)
/**
* CUSE INIT request/reply flags
@@ -224,6 +231,8 @@
enum fuse_notify_code {
FUSE_NOTIFY_POLL = 1,
+ FUSE_NOTIFY_INVAL_INODE = 2,
+ FUSE_NOTIFY_INVAL_ENTRY = 3,
FUSE_NOTIFY_CODE_MAX,
};
@@ -262,14 +271,18 @@
struct fuse_attr attr;
};
+#define FUSE_COMPAT_MKNOD_IN_SIZE 8
+
struct fuse_mknod_in {
__u32 mode;
__u32 rdev;
+ __u32 umask;
+ __u32 padding;
};
struct fuse_mkdir_in {
__u32 mode;
- __u32 padding;
+ __u32 umask;
};
struct fuse_rename_in {
@@ -301,7 +314,14 @@
struct fuse_open_in {
__u32 flags;
+ __u32 unused;
+};
+
+struct fuse_create_in {
+ __u32 flags;
__u32 mode;
+ __u32 umask;
+ __u32 padding;
};
struct fuse_open_out {
@@ -508,4 +528,16 @@
#define FUSE_DIRENT_SIZE(d) \
FUSE_DIRENT_ALIGN(FUSE_NAME_OFFSET + (d)->namelen)
+struct fuse_notify_inval_inode_out {
+ __u64 ino;
+ __s64 off;
+ __s64 len;
+};
+
+struct fuse_notify_inval_entry_out {
+ __u64 parent;
+ __u32 namelen;
+ __u32 padding;
+};
+
#endif /* _LINUX_FUSE_H */
diff --git a/include/linux/hardirq.h b/include/linux/hardirq.h
index 4525747..8246c69 100644
--- a/include/linux/hardirq.h
+++ b/include/linux/hardirq.h
@@ -2,7 +2,9 @@
#define LINUX_HARDIRQ_H
#include <linux/preempt.h>
+#ifdef CONFIG_PREEMPT
#include <linux/smp_lock.h>
+#endif
#include <linux/lockdep.h>
#include <linux/ftrace_irq.h>
#include <asm/hardirq.h>
diff --git a/include/linux/hrtimer.h b/include/linux/hrtimer.h
index 7400900..54648e6 100644
--- a/include/linux/hrtimer.h
+++ b/include/linux/hrtimer.h
@@ -21,6 +21,7 @@
#include <linux/list.h>
#include <linux/wait.h>
#include <linux/percpu.h>
+#include <linux/timer.h>
struct hrtimer_clock_base;
@@ -447,6 +448,8 @@
static inline void timer_stats_account_hrtimer(struct hrtimer *timer)
{
+ if (likely(!timer->start_pid))
+ return;
timer_stats_update_stats(timer, timer->start_pid, timer->start_site,
timer->function, timer->start_comm, 0);
}
@@ -456,6 +459,8 @@
static inline void timer_stats_hrtimer_set_start_info(struct hrtimer *timer)
{
+ if (likely(!timer_stats_active))
+ return;
__timer_stats_hrtimer_set_start_info(timer, __builtin_return_address(0));
}
diff --git a/include/linux/ide.h b/include/linux/ide.h
index 95c6e00..edc93a6 100644
--- a/include/linux/ide.h
+++ b/include/linux/ide.h
@@ -1062,7 +1062,6 @@
extern int ide_vlb_clk;
extern int ide_pci_clk;
-unsigned int ide_rq_bytes(struct request *);
int ide_end_rq(ide_drive_t *, struct request *, int, unsigned int);
void ide_kill_rq(ide_drive_t *, struct request *);
@@ -1361,7 +1360,6 @@
#ifdef CONFIG_BLK_DEV_IDEDMA
int ide_dma_good_drive(ide_drive_t *);
int __ide_dma_bad_drive(ide_drive_t *);
-int ide_id_dma_bug(ide_drive_t *);
u8 ide_find_dma_mode(ide_drive_t *, u8);
@@ -1402,7 +1400,6 @@
ide_startstop_t ide_dma_timeout_retry(ide_drive_t *, int);
#else
-static inline int ide_id_dma_bug(ide_drive_t *drive) { return 0; }
static inline u8 ide_find_dma_mode(ide_drive_t *drive, u8 speed) { return 0; }
static inline u8 ide_max_dma_mode(ide_drive_t *drive) { return 0; }
static inline void ide_dma_off_quietly(ide_drive_t *drive) { ; }
@@ -1422,6 +1419,7 @@
#ifdef CONFIG_BLK_DEV_IDEACPI
int ide_acpi_init(void);
+bool ide_port_acpi(ide_hwif_t *hwif);
extern int ide_acpi_exec_tfs(ide_drive_t *drive);
extern void ide_acpi_get_timing(ide_hwif_t *hwif);
extern void ide_acpi_push_timing(ide_hwif_t *hwif);
@@ -1430,6 +1428,7 @@
extern void ide_acpi_set_state(ide_hwif_t *hwif, int on);
#else
static inline int ide_acpi_init(void) { return 0; }
+static inline bool ide_port_acpi(ide_hwif_t *hwif) { return 0; }
static inline int ide_acpi_exec_tfs(ide_drive_t *drive) { return 0; }
static inline void ide_acpi_get_timing(ide_hwif_t *hwif) { ; }
static inline void ide_acpi_push_timing(ide_hwif_t *hwif) { ; }
diff --git a/include/linux/if_ether.h b/include/linux/if_ether.h
index ae3a187..70fdba2 100644
--- a/include/linux/if_ether.h
+++ b/include/linux/if_ether.h
@@ -78,6 +78,7 @@
#define ETH_P_PAE 0x888E /* Port Access Entity (IEEE 802.1X) */
#define ETH_P_AOE 0x88A2 /* ATA over Ethernet */
#define ETH_P_TIPC 0x88CA /* TIPC */
+#define ETH_P_1588 0x88F7 /* IEEE 1588 Timesync */
#define ETH_P_FCOE 0x8906 /* Fibre Channel over Ethernet */
#define ETH_P_FIP 0x8914 /* FCoE Initialization Protocol */
#define ETH_P_EDSA 0xDADA /* Ethertype DSA [ NOT AN OFFICIALLY REGISTERED ID ] */
diff --git a/include/linux/ima.h b/include/linux/ima.h
index b1b827d..0e3f2a4 100644
--- a/include/linux/ima.h
+++ b/include/linux/ima.h
@@ -24,6 +24,7 @@
extern void ima_file_free(struct file *file);
extern int ima_file_mmap(struct file *file, unsigned long prot);
extern void ima_counts_get(struct file *file);
+extern void ima_counts_put(struct path *path, int mask);
#else
static inline int ima_bprm_check(struct linux_binprm *bprm)
@@ -60,5 +61,10 @@
{
return;
}
+
+static inline void ima_counts_put(struct path *path, int mask)
+{
+ return;
+}
#endif /* CONFIG_IMA_H */
#endif /* _LINUX_IMA_H */
diff --git a/include/linux/init_task.h b/include/linux/init_task.h
index 5368fbd..7fc01b1 100644
--- a/include/linux/init_task.h
+++ b/include/linux/init_task.h
@@ -183,5 +183,8 @@
LIST_HEAD_INIT(cpu_timers[2]), \
}
+/* Attach to the init_task data structure for proper alignment */
+#define __init_task_data __attribute__((__section__(".data.init_task")))
+
#endif
diff --git a/include/linux/input/matrix_keypad.h b/include/linux/input/matrix_keypad.h
new file mode 100644
index 0000000..7964516
--- /dev/null
+++ b/include/linux/input/matrix_keypad.h
@@ -0,0 +1,65 @@
+#ifndef _MATRIX_KEYPAD_H
+#define _MATRIX_KEYPAD_H
+
+#include <linux/types.h>
+#include <linux/input.h>
+
+#define MATRIX_MAX_ROWS 16
+#define MATRIX_MAX_COLS 16
+
+#define KEY(row, col, val) ((((row) & (MATRIX_MAX_ROWS - 1)) << 24) |\
+ (((col) & (MATRIX_MAX_COLS - 1)) << 16) |\
+ (val & 0xffff))
+
+#define KEY_ROW(k) (((k) >> 24) & 0xff)
+#define KEY_COL(k) (((k) >> 16) & 0xff)
+#define KEY_VAL(k) ((k) & 0xffff)
+
+/**
+ * struct matrix_keymap_data - keymap for matrix keyboards
+ * @keymap: pointer to array of uint32 values encoded with KEY() macro
+ * representing keymap
+ * @keymap_size: number of entries (initialized) in this keymap
+ * @max_keymap_size: maximum size of keymap supported by the device
+ *
+ * This structure is supposed to be used by platform code to supply
+ * keymaps to drivers that implement matrix-like keypads/keyboards.
+ */
+struct matrix_keymap_data {
+ const uint32_t *keymap;
+ unsigned int keymap_size;
+ unsigned int max_keymap_size;
+};
+
+/**
+ * struct matrix_keypad_platform_data - platform-dependent keypad data
+ * @keymap_data: pointer to &matrix_keymap_data
+ * @row_gpios: array of gpio numbers reporesenting rows
+ * @col_gpios: array of gpio numbers reporesenting colums
+ * @num_row_gpios: actual number of row gpios used by device
+ * @num_col_gpios: actual number of col gpios used by device
+ * @col_scan_delay_us: delay, measured in microseconds, that is
+ * needed before we can keypad after activating column gpio
+ * @debounce_ms: debounce interval in milliseconds
+ *
+ * This structure represents platform-specific data that use used by
+ * matrix_keypad driver to perform proper initialization.
+ */
+struct matrix_keypad_platform_data {
+ const struct matrix_keymap_data *keymap_data;
+
+ unsigned int row_gpios[MATRIX_MAX_ROWS];
+ unsigned int col_gpios[MATRIX_MAX_COLS];
+ unsigned int num_row_gpios;
+ unsigned int num_col_gpios;
+
+ unsigned int col_scan_delay_us;
+
+ /* key debounce interval in milli-second */
+ unsigned int debounce_ms;
+
+ bool active_low;
+ bool wakeup;
+};
+
+#endif /* _MATRIX_KEYPAD_H */
diff --git a/include/linux/kernel.h b/include/linux/kernel.h
index fac104e..d6320a3 100644
--- a/include/linux/kernel.h
+++ b/include/linux/kernel.h
@@ -303,6 +303,7 @@
extern int panic_timeout;
extern int panic_on_oops;
extern int panic_on_unrecovered_nmi;
+extern int panic_on_io_nmi;
extern const char *print_tainted(void);
extern void add_taint(unsigned flag);
extern int test_taint(unsigned flag);
diff --git a/include/linux/kmemleak.h b/include/linux/kmemleak.h
index 7796aed..6a63807 100644
--- a/include/linux/kmemleak.h
+++ b/include/linux/kmemleak.h
@@ -27,6 +27,7 @@
extern void kmemleak_alloc(const void *ptr, size_t size, int min_count,
gfp_t gfp);
extern void kmemleak_free(const void *ptr);
+extern void kmemleak_free_part(const void *ptr, size_t size);
extern void kmemleak_padding(const void *ptr, unsigned long offset,
size_t size);
extern void kmemleak_not_leak(const void *ptr);
@@ -71,6 +72,9 @@
static inline void kmemleak_free(const void *ptr)
{
}
+static inline void kmemleak_free_part(const void *ptr, size_t size)
+{
+}
static inline void kmemleak_free_recursive(const void *ptr, unsigned long flags)
{
}
diff --git a/include/linux/kvm_host.h b/include/linux/kvm_host.h
index aacc544..16713dc 100644
--- a/include/linux/kvm_host.h
+++ b/include/linux/kvm_host.h
@@ -125,6 +125,7 @@
struct kvm {
struct mutex lock; /* protects the vcpus array and APIC accesses */
spinlock_t mmu_lock;
+ spinlock_t requests_lock;
struct rw_semaphore slots_lock;
struct mm_struct *mm; /* userspace tied to this vm */
int nmemslots;
diff --git a/include/linux/leds-lp3944.h b/include/linux/leds-lp3944.h
new file mode 100644
index 0000000..afc9f9f
--- /dev/null
+++ b/include/linux/leds-lp3944.h
@@ -0,0 +1,53 @@
+/*
+ * leds-lp3944.h - platform data structure for lp3944 led controller
+ *
+ * Copyright (C) 2009 Antonio Ospite <ospite@studenti.unina.it>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef __LINUX_LEDS_LP3944_H
+#define __LINUX_LEDS_LP3944_H
+
+#include <linux/leds.h>
+#include <linux/workqueue.h>
+
+#define LP3944_LED0 0
+#define LP3944_LED1 1
+#define LP3944_LED2 2
+#define LP3944_LED3 3
+#define LP3944_LED4 4
+#define LP3944_LED5 5
+#define LP3944_LED6 6
+#define LP3944_LED7 7
+#define LP3944_LEDS_MAX 8
+
+#define LP3944_LED_STATUS_MASK 0x03
+enum lp3944_status {
+ LP3944_LED_STATUS_OFF = 0x0,
+ LP3944_LED_STATUS_ON = 0x1,
+ LP3944_LED_STATUS_DIM0 = 0x2,
+ LP3944_LED_STATUS_DIM1 = 0x3
+};
+
+enum lp3944_type {
+ LP3944_LED_TYPE_NONE,
+ LP3944_LED_TYPE_LED,
+ LP3944_LED_TYPE_LED_INVERTED,
+};
+
+struct lp3944_led {
+ char *name;
+ enum lp3944_type type;
+ enum lp3944_status status;
+};
+
+struct lp3944_platform_data {
+ struct lp3944_led leds[LP3944_LEDS_MAX];
+ u8 leds_size;
+};
+
+#endif /* __LINUX_LEDS_LP3944_H */
diff --git a/include/linux/leds.h b/include/linux/leds.h
index 376fe07..d8bf966 100644
--- a/include/linux/leds.h
+++ b/include/linux/leds.h
@@ -45,7 +45,10 @@
/* Get LED brightness level */
enum led_brightness (*brightness_get)(struct led_classdev *led_cdev);
- /* Activate hardware accelerated blink */
+ /* Activate hardware accelerated blink, delays are in
+ * miliseconds and if none is provided then a sensible default
+ * should be chosen. The call can adjust the timings if it can't
+ * match the values specified exactly. */
int (*blink_set)(struct led_classdev *led_cdev,
unsigned long *delay_on,
unsigned long *delay_off);
@@ -141,9 +144,14 @@
const char *name;
const char *default_trigger;
unsigned gpio;
- u8 active_low : 1;
- u8 retain_state_suspended : 1;
+ unsigned active_low : 1;
+ unsigned retain_state_suspended : 1;
+ unsigned default_state : 2;
+ /* default_state should be one of LEDS_GPIO_DEFSTATE_(ON|OFF|KEEP) */
};
+#define LEDS_GPIO_DEFSTATE_OFF 0
+#define LEDS_GPIO_DEFSTATE_ON 1
+#define LEDS_GPIO_DEFSTATE_KEEP 2
struct gpio_led_platform_data {
int num_leds;
diff --git a/include/linux/linkage.h b/include/linux/linkage.h
index fee9e59..691f591 100644
--- a/include/linux/linkage.h
+++ b/include/linux/linkage.h
@@ -22,6 +22,15 @@
#define __page_aligned_bss __section(.bss.page_aligned) __aligned(PAGE_SIZE)
/*
+ * For assembly routines.
+ *
+ * Note when using these that you must specify the appropriate
+ * alignment directives yourself
+ */
+#define __PAGE_ALIGNED_DATA .section ".data.page_aligned", "aw"
+#define __PAGE_ALIGNED_BSS .section ".bss.page_aligned", "aw"
+
+/*
* This is used by architectures to keep arguments on the stack
* untouched by the compiler by keeping them live until the end.
* The argument stack may be owned by the assembly-language
diff --git a/include/linux/mm.h b/include/linux/mm.h
index d006e93..ba3a7cb 100644
--- a/include/linux/mm.h
+++ b/include/linux/mm.h
@@ -826,7 +826,7 @@
extern int access_process_vm(struct task_struct *tsk, unsigned long addr, void *buf, int len, int write);
int get_user_pages(struct task_struct *tsk, struct mm_struct *mm,
- unsigned long start, int len, int write, int force,
+ unsigned long start, int nr_pages, int write, int force,
struct page **pages, struct vm_area_struct **vmas);
int get_user_pages_fast(unsigned long start, int nr_pages, int write,
struct page **pages);
diff --git a/include/linux/mnt_namespace.h b/include/linux/mnt_namespace.h
index 3beb259..d74785c 100644
--- a/include/linux/mnt_namespace.h
+++ b/include/linux/mnt_namespace.h
@@ -2,10 +2,9 @@
#define _NAMESPACE_H_
#ifdef __KERNEL__
-#include <linux/mount.h>
-#include <linux/sched.h>
-#include <linux/nsproxy.h>
+#include <linux/path.h>
#include <linux/seq_file.h>
+#include <linux/wait.h>
struct mnt_namespace {
atomic_t count;
@@ -28,14 +27,6 @@
extern struct mnt_namespace *copy_mnt_ns(unsigned long, struct mnt_namespace *,
struct fs_struct *);
extern void put_mnt_ns(struct mnt_namespace *ns);
-
-static inline void exit_mnt_ns(struct task_struct *p)
-{
- struct mnt_namespace *ns = p->nsproxy->mnt_ns;
- if (ns)
- put_mnt_ns(ns);
-}
-
static inline void get_mnt_ns(struct mnt_namespace *ns)
{
atomic_inc(&ns->count);
diff --git a/include/linux/netfilter/xt_conntrack.h b/include/linux/netfilter/xt_conntrack.h
index 3430c77..7ae0533 100644
--- a/include/linux/netfilter/xt_conntrack.h
+++ b/include/linux/netfilter/xt_conntrack.h
@@ -81,4 +81,17 @@
__u8 state_mask, status_mask;
};
+struct xt_conntrack_mtinfo2 {
+ union nf_inet_addr origsrc_addr, origsrc_mask;
+ union nf_inet_addr origdst_addr, origdst_mask;
+ union nf_inet_addr replsrc_addr, replsrc_mask;
+ union nf_inet_addr repldst_addr, repldst_mask;
+ __u32 expires_min, expires_max;
+ __u16 l4proto;
+ __be16 origsrc_port, origdst_port;
+ __be16 replsrc_port, repldst_port;
+ __u16 match_flags, invert_flags;
+ __u16 state_mask, status_mask;
+};
+
#endif /*_XT_CONNTRACK_H*/
diff --git a/include/linux/netfilter/xt_osf.h b/include/linux/netfilter/xt_osf.h
index fd2272e..18afa49 100644
--- a/include/linux/netfilter/xt_osf.h
+++ b/include/linux/netfilter/xt_osf.h
@@ -20,6 +20,8 @@
#ifndef _XT_OSF_H
#define _XT_OSF_H
+#include <linux/types.h>
+
#define MAXGENRELEN 32
#define XT_OSF_GENRE (1<<0)
diff --git a/include/linux/pci.h b/include/linux/pci.h
index d304ddf..115fb7b 100644
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -1145,7 +1145,7 @@
/* If you want to know what to call your pci_dev, ask this function.
* Again, it's a wrapper around the generic device.
*/
-static inline const char *pci_name(struct pci_dev *pdev)
+static inline const char *pci_name(const struct pci_dev *pdev)
{
return dev_name(&pdev->dev);
}
diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
index a3b0003..73b46b6 100644
--- a/include/linux/pci_ids.h
+++ b/include/linux/pci_ids.h
@@ -2645,6 +2645,7 @@
#define PCI_DEVICE_ID_NETMOS_9835 0x9835
#define PCI_DEVICE_ID_NETMOS_9845 0x9845
#define PCI_DEVICE_ID_NETMOS_9855 0x9855
+#define PCI_DEVICE_ID_NETMOS_9901 0x9901
#define PCI_VENDOR_ID_3COM_2 0xa727
diff --git a/include/linux/percpu-defs.h b/include/linux/percpu-defs.h
index 8f921d7..68438e1 100644
--- a/include/linux/percpu-defs.h
+++ b/include/linux/percpu-defs.h
@@ -24,7 +24,8 @@
#define DEFINE_PER_CPU_SECTION(type, name, section) \
__attribute__((__section__(PER_CPU_BASE_SECTION section))) \
- PER_CPU_ATTRIBUTES __typeof__(type) per_cpu__##name
+ PER_CPU_ATTRIBUTES PER_CPU_DEF_ATTRIBUTES \
+ __typeof__(type) per_cpu__##name
/*
* Variant on the per-CPU variable declaration/definition theme used for
diff --git a/include/linux/perf_counter.h b/include/linux/perf_counter.h
index 89698d8..5e970c7 100644
--- a/include/linux/perf_counter.h
+++ b/include/linux/perf_counter.h
@@ -178,8 +178,10 @@
mmap : 1, /* include mmap data */
comm : 1, /* include comm data */
freq : 1, /* use freq, not period */
+ inherit_stat : 1, /* per task counts */
+ enable_on_exec : 1, /* next exec enables */
- __reserved_1 : 53;
+ __reserved_1 : 51;
__u32 wakeup_events; /* wakeup every n events */
__u32 __reserved_2;
@@ -232,6 +234,14 @@
__u32 lock; /* seqlock for synchronization */
__u32 index; /* hardware counter identifier */
__s64 offset; /* add to hardware counter value */
+ __u64 time_enabled; /* time counter active */
+ __u64 time_running; /* time counter on cpu */
+
+ /*
+ * Hole for extension of the self monitor capabilities
+ */
+
+ __u64 __reserved[123]; /* align to 1k */
/*
* Control data for the mmap() data buffer.
@@ -253,7 +263,6 @@
#define PERF_EVENT_MISC_KERNEL (1 << 0)
#define PERF_EVENT_MISC_USER (2 << 0)
#define PERF_EVENT_MISC_HYPERVISOR (3 << 0)
-#define PERF_EVENT_MISC_OVERFLOW (1 << 2)
struct perf_event_header {
__u32 type;
@@ -327,9 +336,18 @@
PERF_EVENT_FORK = 7,
/*
- * When header.misc & PERF_EVENT_MISC_OVERFLOW the event_type field
- * will be PERF_SAMPLE_*
- *
+ * struct {
+ * struct perf_event_header header;
+ * u32 pid, tid;
+ * u64 value;
+ * { u64 time_enabled; } && PERF_FORMAT_ENABLED
+ * { u64 time_running; } && PERF_FORMAT_RUNNING
+ * { u64 parent_id; } && PERF_FORMAT_ID
+ * };
+ */
+ PERF_EVENT_READ = 8,
+
+ /*
* struct {
* struct perf_event_header header;
*
@@ -337,8 +355,9 @@
* { u32 pid, tid; } && PERF_SAMPLE_TID
* { u64 time; } && PERF_SAMPLE_TIME
* { u64 addr; } && PERF_SAMPLE_ADDR
- * { u64 config; } && PERF_SAMPLE_CONFIG
+ * { u64 id; } && PERF_SAMPLE_ID
* { u32 cpu, res; } && PERF_SAMPLE_CPU
+ * { u64 period; } && PERF_SAMPLE_PERIOD
*
* { u64 nr;
* { u64 id, val; } cnt[nr]; } && PERF_SAMPLE_GROUP
@@ -347,6 +366,9 @@
* u64 ips[nr]; } && PERF_SAMPLE_CALLCHAIN
* };
*/
+ PERF_EVENT_SAMPLE = 9,
+
+ PERF_EVENT_MAX, /* non-ABI */
};
enum perf_callchain_context {
@@ -582,6 +604,7 @@
int nr_counters;
int nr_active;
int is_active;
+ int nr_stat;
atomic_t refcount;
struct task_struct *task;
@@ -669,7 +692,16 @@
(counter->attr.type != PERF_TYPE_HW_CACHE);
}
-extern void perf_swcounter_event(u32, u64, int, struct pt_regs *, u64);
+extern atomic_t perf_swcounter_enabled[PERF_COUNT_SW_MAX];
+
+extern void __perf_swcounter_event(u32, u64, int, struct pt_regs *, u64);
+
+static inline void
+perf_swcounter_event(u32 event, u64 nr, int nmi, struct pt_regs *regs, u64 addr)
+{
+ if (atomic_read(&perf_swcounter_enabled[event]))
+ __perf_swcounter_event(event, nr, nmi, regs, addr);
+}
extern void __perf_counter_mmap(struct vm_area_struct *vma);
diff --git a/include/linux/personality.h b/include/linux/personality.h
index a84e9ff..12612081 100644
--- a/include/linux/personality.h
+++ b/include/linux/personality.h
@@ -40,7 +40,10 @@
* Security-relevant compatibility flags that must be
* cleared upon setuid or setgid exec:
*/
-#define PER_CLEAR_ON_SETID (READ_IMPLIES_EXEC|ADDR_NO_RANDOMIZE)
+#define PER_CLEAR_ON_SETID (READ_IMPLIES_EXEC | \
+ ADDR_NO_RANDOMIZE | \
+ ADDR_COMPAT_LAYOUT | \
+ MMAP_PAGE_ZERO)
/*
* Personality types.
diff --git a/include/linux/quotaops.h b/include/linux/quotaops.h
index 7bc4575..26361c4 100644
--- a/include/linux/quotaops.h
+++ b/include/linux/quotaops.h
@@ -7,7 +7,6 @@
#ifndef _LINUX_QUOTAOPS_
#define _LINUX_QUOTAOPS_
-#include <linux/smp_lock.h>
#include <linux/fs.h>
static inline struct quota_info *sb_dqopt(struct super_block *sb)
diff --git a/include/linux/rfkill.h b/include/linux/rfkill.h
index e73e242..2ce2983 100644
--- a/include/linux/rfkill.h
+++ b/include/linux/rfkill.h
@@ -99,7 +99,6 @@
#undef RFKILL_STATE_UNBLOCKED
#undef RFKILL_STATE_HARD_BLOCKED
-#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/list.h>
#include <linux/mutex.h>
diff --git a/include/linux/sched.h b/include/linux/sched.h
index 4d07542..16a982e 100644
--- a/include/linux/sched.h
+++ b/include/linux/sched.h
@@ -349,8 +349,20 @@
struct nsproxy;
struct user_namespace;
-/* Maximum number of active map areas.. This is a random (large) number */
-#define DEFAULT_MAX_MAP_COUNT 65536
+/*
+ * Default maximum number of active map areas, this limits the number of vmas
+ * per mm struct. Users can overwrite this number by sysctl but there is a
+ * problem.
+ *
+ * When a program's coredump is generated as ELF format, a section is created
+ * per a vma. In ELF, the number of sections is represented in unsigned short.
+ * This means the number of sections should be smaller than 65535 at coredump.
+ * Because the kernel adds some informative sections to a image of program at
+ * generating coredump, we need some margin. The number of extra sections is
+ * 1-3 now and depends on arch. We use "5" as safe margin, here.
+ */
+#define MAPCOUNT_ELF_CORE_MARGIN (5)
+#define DEFAULT_MAX_MAP_COUNT (USHORT_MAX - MAPCOUNT_ELF_CORE_MARGIN)
extern int sysctl_max_map_count;
@@ -486,6 +498,15 @@
.sum_exec_runtime = 0, \
}
+/*
+ * Disable preemption until the scheduler is running.
+ * Reset by start_kernel()->sched_init()->init_idle().
+ *
+ * We include PREEMPT_ACTIVE to avoid cond_resched() from working
+ * before the scheduler is active -- see should_resched().
+ */
+#define INIT_PREEMPT_COUNT (1 + PREEMPT_ACTIVE)
+
/**
* struct thread_group_cputimer - thread group interval timer counts
* @cputime: thread group interval timers.
diff --git a/include/linux/slub_def.h b/include/linux/slub_def.h
index 4dcbc2c..c1c862b 100644
--- a/include/linux/slub_def.h
+++ b/include/linux/slub_def.h
@@ -11,6 +11,7 @@
#include <linux/workqueue.h>
#include <linux/kobject.h>
#include <linux/kmemtrace.h>
+#include <linux/kmemleak.h>
enum stat_item {
ALLOC_FASTPATH, /* Allocation from cpu slab */
@@ -233,6 +234,7 @@
unsigned int order = get_order(size);
void *ret = (void *) __get_free_pages(flags | __GFP_COMP, order);
+ kmemleak_alloc(ret, size, 1, flags);
trace_kmalloc(_THIS_IP_, ret, size, PAGE_SIZE << order, flags);
return ret;
diff --git a/include/linux/spi/spi.h b/include/linux/spi/spi.h
index 9c4cd27..c47c4b4 100644
--- a/include/linux/spi/spi.h
+++ b/include/linux/spi/spi.h
@@ -80,6 +80,8 @@
#define SPI_LSB_FIRST 0x08 /* per-word bits-on-wire */
#define SPI_3WIRE 0x10 /* SI/SO signals shared */
#define SPI_LOOP 0x20 /* loopback mode */
+#define SPI_NO_CS 0x40 /* 1 dev/bus, no chipselect */
+#define SPI_READY 0x80 /* slave pulls low to pause */
u8 bits_per_word;
int irq;
void *controller_state;
@@ -248,6 +250,10 @@
/* spi_device.mode flags understood by this controller driver */
u16 mode_bits;
+ /* other constraints relevant to this driver */
+ u16 flags;
+#define SPI_MASTER_HALF_DUPLEX BIT(0) /* can't do full duplex */
+
/* Setup mode and clock, etc (spi driver may call many times).
*
* IMPORTANT: this may be called when transfers to another
diff --git a/include/linux/spi/spidev.h b/include/linux/spi/spidev.h
index 95251cc..bf0570a 100644
--- a/include/linux/spi/spidev.h
+++ b/include/linux/spi/spidev.h
@@ -40,6 +40,8 @@
#define SPI_LSB_FIRST 0x08
#define SPI_3WIRE 0x10
#define SPI_LOOP 0x20
+#define SPI_NO_CS 0x40
+#define SPI_READY 0x80
/*---------------------------------------------------------------------------*/
diff --git a/include/linux/spinlock.h b/include/linux/spinlock.h
index 252b245..4be57ab 100644
--- a/include/linux/spinlock.h
+++ b/include/linux/spinlock.h
@@ -132,6 +132,11 @@
#endif /*__raw_spin_is_contended*/
#endif
+/* The lock does not imply full memory barrier. */
+#ifndef ARCH_HAS_SMP_MB_AFTER_LOCK
+static inline void smp_mb__after_lock(void) { smp_mb(); }
+#endif
+
/**
* spin_unlock_wait - wait until the spinlock gets unlocked
* @lock: the spinlock in question.
diff --git a/include/linux/sunrpc/xdr.h b/include/linux/sunrpc/xdr.h
index d8910b6..b99c625 100644
--- a/include/linux/sunrpc/xdr.h
+++ b/include/linux/sunrpc/xdr.h
@@ -12,7 +12,6 @@
#include <linux/uio.h>
#include <asm/byteorder.h>
#include <linux/scatterlist.h>
-#include <linux/smp_lock.h>
/*
* Buffer adjustment
diff --git a/include/linux/syscalls.h b/include/linux/syscalls.h
index fa4242c..80de700 100644
--- a/include/linux/syscalls.h
+++ b/include/linux/syscalls.h
@@ -321,6 +321,8 @@
siginfo_t __user *uinfo,
const struct timespec __user *uts,
size_t sigsetsize);
+asmlinkage long sys_rt_tgsigqueueinfo(pid_t tgid, pid_t pid, int sig,
+ siginfo_t __user *uinfo);
asmlinkage long sys_kill(int pid, int sig);
asmlinkage long sys_tgkill(int tgid, int pid, int sig);
asmlinkage long sys_tkill(int pid, int sig);
diff --git a/include/linux/sysrq.h b/include/linux/sysrq.h
index 98a1d8c..99adcdc 100644
--- a/include/linux/sysrq.h
+++ b/include/linux/sysrq.h
@@ -14,6 +14,8 @@
#ifndef _LINUX_SYSRQ_H
#define _LINUX_SYSRQ_H
+#include <linux/errno.h>
+
struct pt_regs;
struct tty_struct;
diff --git a/include/linux/timer.h b/include/linux/timer.h
index ccf882e..be62ec2 100644
--- a/include/linux/timer.h
+++ b/include/linux/timer.h
@@ -190,6 +190,8 @@
*/
#ifdef CONFIG_TIMER_STATS
+extern int timer_stats_active;
+
#define TIMER_STATS_FLAG_DEFERRABLE 0x1
extern void init_timer_stats(void);
@@ -203,6 +205,8 @@
static inline void timer_stats_timer_set_start_info(struct timer_list *timer)
{
+ if (likely(!timer_stats_active))
+ return;
__timer_stats_timer_set_start_info(timer, __builtin_return_address(0));
}
diff --git a/include/linux/usb.h b/include/linux/usb.h
index 84929e9..b1e3c2f 100644
--- a/include/linux/usb.h
+++ b/include/linux/usb.h
@@ -888,8 +888,6 @@
* struct usb_device_driver - identifies USB device driver to usbcore
* @name: The driver name should be unique among USB drivers,
* and should normally be the same as the module name.
- * @nodename: Callback to provide a naming hint for a possible
- * device node to create.
* @probe: Called to see if the driver is willing to manage a particular
* device. If it is, probe returns zero and uses dev_set_drvdata()
* to associate driver-specific data with the device. If unwilling
@@ -924,6 +922,8 @@
/**
* struct usb_class_driver - identifies a USB driver that wants to use the USB major number
* @name: the usb class device name for this driver. Will show up in sysfs.
+ * @nodename: Callback to provide a naming hint for a possible
+ * device node to create.
* @fops: pointer to the struct file_operations of this driver.
* @minor_base: the start of the minor range for this driver.
*
@@ -1046,6 +1046,8 @@
* the device driver is saying that it provided this DMA address,
* which the host controller driver should use in preference to the
* transfer_buffer.
+ * @sg: scatter gather buffer list
+ * @num_sgs: number of entries in the sg list
* @transfer_buffer_length: How big is transfer_buffer. The transfer may
* be broken up into chunks according to the current maximum packet
* size for the endpoint, which is a function of the configuration
diff --git a/include/linux/usb/langwell_otg.h b/include/linux/usb/langwell_otg.h
deleted file mode 100644
index e115ae6..0000000
--- a/include/linux/usb/langwell_otg.h
+++ /dev/null
@@ -1,177 +0,0 @@
-/*
- * Intel Langwell USB OTG transceiver driver
- * Copyright (C) 2008, Intel Corporation.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
- *
- */
-
-#ifndef __LANGWELL_OTG_H__
-#define __LANGWELL_OTG_H__
-
-/* notify transceiver driver about OTG events */
-extern void langwell_update_transceiver(void);
-/* HCD register bus driver */
-extern int langwell_register_host(struct pci_driver *host_driver);
-/* HCD unregister bus driver */
-extern void langwell_unregister_host(struct pci_driver *host_driver);
-/* DCD register bus driver */
-extern int langwell_register_peripheral(struct pci_driver *client_driver);
-/* DCD unregister bus driver */
-extern void langwell_unregister_peripheral(struct pci_driver *client_driver);
-/* No silent failure, output warning message */
-extern void langwell_otg_nsf_msg(unsigned long message);
-
-#define CI_USBCMD 0x30
-# define USBCMD_RST BIT(1)
-# define USBCMD_RS BIT(0)
-#define CI_USBSTS 0x34
-# define USBSTS_SLI BIT(8)
-# define USBSTS_URI BIT(6)
-# define USBSTS_PCI BIT(2)
-#define CI_PORTSC1 0x74
-# define PORTSC_PP BIT(12)
-# define PORTSC_LS (BIT(11) | BIT(10))
-# define PORTSC_SUSP BIT(7)
-# define PORTSC_CCS BIT(0)
-#define CI_HOSTPC1 0xb4
-# define HOSTPC1_PHCD BIT(22)
-#define CI_OTGSC 0xf4
-# define OTGSC_DPIE BIT(30)
-# define OTGSC_1MSE BIT(29)
-# define OTGSC_BSEIE BIT(28)
-# define OTGSC_BSVIE BIT(27)
-# define OTGSC_ASVIE BIT(26)
-# define OTGSC_AVVIE BIT(25)
-# define OTGSC_IDIE BIT(24)
-# define OTGSC_DPIS BIT(22)
-# define OTGSC_1MSS BIT(21)
-# define OTGSC_BSEIS BIT(20)
-# define OTGSC_BSVIS BIT(19)
-# define OTGSC_ASVIS BIT(18)
-# define OTGSC_AVVIS BIT(17)
-# define OTGSC_IDIS BIT(16)
-# define OTGSC_DPS BIT(14)
-# define OTGSC_1MST BIT(13)
-# define OTGSC_BSE BIT(12)
-# define OTGSC_BSV BIT(11)
-# define OTGSC_ASV BIT(10)
-# define OTGSC_AVV BIT(9)
-# define OTGSC_ID BIT(8)
-# define OTGSC_HABA BIT(7)
-# define OTGSC_HADP BIT(6)
-# define OTGSC_IDPU BIT(5)
-# define OTGSC_DP BIT(4)
-# define OTGSC_OT BIT(3)
-# define OTGSC_HAAR BIT(2)
-# define OTGSC_VC BIT(1)
-# define OTGSC_VD BIT(0)
-# define OTGSC_INTEN_MASK (0x7f << 24)
-# define OTGSC_INTSTS_MASK (0x7f << 16)
-#define CI_USBMODE 0xf8
-# define USBMODE_CM (BIT(1) | BIT(0))
-# define USBMODE_IDLE 0
-# define USBMODE_DEVICE 0x2
-# define USBMODE_HOST 0x3
-
-#define INTR_DUMMY_MASK (USBSTS_SLI | USBSTS_URI | USBSTS_PCI)
-
-struct otg_hsm {
- /* Input */
- int a_bus_resume;
- int a_bus_suspend;
- int a_conn;
- int a_sess_vld;
- int a_srp_det;
- int a_vbus_vld;
- int b_bus_resume;
- int b_bus_suspend;
- int b_conn;
- int b_se0_srp;
- int b_sess_end;
- int b_sess_vld;
- int id;
-
- /* Internal variables */
- int a_set_b_hnp_en;
- int b_srp_done;
- int b_hnp_enable;
-
- /* Timeout indicator for timers */
- int a_wait_vrise_tmout;
- int a_wait_bcon_tmout;
- int a_aidl_bdis_tmout;
- int b_ase0_brst_tmout;
- int b_bus_suspend_tmout;
- int b_srp_res_tmout;
-
- /* Informative variables */
- int a_bus_drop;
- int a_bus_req;
- int a_clr_err;
- int a_suspend_req;
- int b_bus_req;
-
- /* Output */
- int drv_vbus;
- int loc_conn;
- int loc_sof;
-
- /* Others */
- int b_bus_suspend_vld;
-};
-
-#define TA_WAIT_VRISE 100
-#define TA_WAIT_BCON 30000
-#define TA_AIDL_BDIS 15000
-#define TB_ASE0_BRST 5000
-#define TB_SE0_SRP 2
-#define TB_SRP_RES 100
-#define TB_BUS_SUSPEND 500
-
-struct langwell_otg_timer {
- unsigned long expires; /* Number of count increase to timeout */
- unsigned long count; /* Tick counter */
- void (*function)(unsigned long); /* Timeout function */
- unsigned long data; /* Data passed to function */
- struct list_head list;
-};
-
-struct langwell_otg {
- struct otg_transceiver otg;
- struct otg_hsm hsm;
- void __iomem *regs;
- unsigned region;
- struct pci_driver *host_ops;
- struct pci_driver *client_ops;
- struct pci_dev *pdev;
- struct work_struct work;
- struct workqueue_struct *qwork;
- spinlock_t lock;
- spinlock_t wq_lock;
-};
-
-static inline struct langwell_otg *otg_to_langwell(struct otg_transceiver *otg)
-{
- return container_of(otg, struct langwell_otg, otg);
-}
-
-#ifdef DEBUG
-#define otg_dbg(fmt, args...) \
- printk(KERN_DEBUG fmt , ## args)
-#else
-#define otg_dbg(fmt, args...) \
- do { } while (0)
-#endif /* DEBUG */
-#endif /* __LANGWELL_OTG_H__ */
diff --git a/include/linux/usb/serial.h b/include/linux/usb/serial.h
index 44801d2..0ec50ba 100644
--- a/include/linux/usb/serial.h
+++ b/include/linux/usb/serial.h
@@ -317,7 +317,8 @@
extern void usb_serial_generic_deregister(void);
extern void usb_serial_generic_resubmit_read_urb(struct usb_serial_port *port,
gfp_t mem_flags);
-extern int usb_serial_handle_sysrq_char(struct usb_serial_port *port,
+extern int usb_serial_handle_sysrq_char(struct tty_struct *tty,
+ struct usb_serial_port *port,
unsigned int ch);
extern int usb_serial_handle_break(struct usb_serial_port *port);
diff --git a/include/linux/usb/usbnet.h b/include/linux/usb/usbnet.h
index 5d44059..310e18a 100644
--- a/include/linux/usb/usbnet.h
+++ b/include/linux/usb/usbnet.h
@@ -42,7 +42,6 @@
/* protocol/interface state */
struct net_device *net;
- struct net_device_stats stats;
int msg_enable;
unsigned long data [5];
u32 xid;
diff --git a/include/linux/videodev2.h b/include/linux/videodev2.h
index 8a025d5..95846d9 100644
--- a/include/linux/videodev2.h
+++ b/include/linux/videodev2.h
@@ -318,6 +318,8 @@
/* see http://www.siliconimaging.com/RGB%20Bayer.htm */
#define V4L2_PIX_FMT_SBGGR8 v4l2_fourcc('B', 'A', '8', '1') /* 8 BGBG.. GRGR.. */
#define V4L2_PIX_FMT_SGBRG8 v4l2_fourcc('G', 'B', 'R', 'G') /* 8 GBGB.. RGRG.. */
+#define V4L2_PIX_FMT_SGRBG8 v4l2_fourcc('G', 'R', 'B', 'G') /* 8 GRGR.. BGBG.. */
+
/*
* 10bit raw bayer, expanded to 16 bits
* xxxxrrrrrrrrrrxxxxgggggggggg xxxxggggggggggxxxxbbbbbbbbbb...
diff --git a/include/media/v4l2-chip-ident.h b/include/media/v4l2-chip-ident.h
index 4d7e227..11a4a2d 100644
--- a/include/media/v4l2-chip-ident.h
+++ b/include/media/v4l2-chip-ident.h
@@ -155,6 +155,9 @@
/* module cafe_ccic, just ident 8801 */
V4L2_IDENT_CAFE = 8801,
+ /* module mt9v011, just ident 8243 */
+ V4L2_IDENT_MT9V011 = 8243,
+
/* module tw9910: just ident 9910 */
V4L2_IDENT_TW9910 = 9910,
diff --git a/include/net/netfilter/nf_conntrack.h b/include/net/netfilter/nf_conntrack.h
index a632689..cbdd628 100644
--- a/include/net/netfilter/nf_conntrack.h
+++ b/include/net/netfilter/nf_conntrack.h
@@ -258,8 +258,8 @@
/* Update TCP window tracking data when NAT mangles the packet */
extern void nf_conntrack_tcp_update(const struct sk_buff *skb,
unsigned int dataoff,
- struct nf_conn *ct,
- int dir);
+ struct nf_conn *ct, int dir,
+ s16 offset);
/* Fake conntrack entry for untracked connections */
extern struct nf_conn nf_conntrack_untracked;
diff --git a/include/net/phonet/pn_dev.h b/include/net/phonet/pn_dev.h
index 5054dc5..29d1267 100644
--- a/include/net/phonet/pn_dev.h
+++ b/include/net/phonet/pn_dev.h
@@ -45,6 +45,7 @@
int phonet_address_del(struct net_device *dev, u8 addr);
u8 phonet_address_get(struct net_device *dev, u8 addr);
int phonet_address_lookup(struct net *net, u8 addr);
+void phonet_address_notify(int event, struct net_device *dev, u8 addr);
#define PN_NO_ADDR 0xff
diff --git a/include/net/sock.h b/include/net/sock.h
index 352f06bb..2c0da92 100644
--- a/include/net/sock.h
+++ b/include/net/sock.h
@@ -54,6 +54,7 @@
#include <linux/filter.h>
#include <linux/rculist_nulls.h>
+#include <linux/poll.h>
#include <asm/atomic.h>
#include <net/dst.h>
@@ -1241,6 +1242,74 @@
return sk_wmem_alloc_get(sk) || sk_rmem_alloc_get(sk);
}
+/**
+ * sk_has_sleeper - check if there are any waiting processes
+ * @sk: socket
+ *
+ * Returns true if socket has waiting processes
+ *
+ * The purpose of the sk_has_sleeper and sock_poll_wait is to wrap the memory
+ * barrier call. They were added due to the race found within the tcp code.
+ *
+ * Consider following tcp code paths:
+ *
+ * CPU1 CPU2
+ *
+ * sys_select receive packet
+ * ... ...
+ * __add_wait_queue update tp->rcv_nxt
+ * ... ...
+ * tp->rcv_nxt check sock_def_readable
+ * ... {
+ * schedule ...
+ * if (sk->sk_sleep && waitqueue_active(sk->sk_sleep))
+ * wake_up_interruptible(sk->sk_sleep)
+ * ...
+ * }
+ *
+ * The race for tcp fires when the __add_wait_queue changes done by CPU1 stay
+ * in its cache, and so does the tp->rcv_nxt update on CPU2 side. The CPU1
+ * could then endup calling schedule and sleep forever if there are no more
+ * data on the socket.
+ *
+ * The sk_has_sleeper is always called right after a call to read_lock, so we
+ * can use smp_mb__after_lock barrier.
+ */
+static inline int sk_has_sleeper(struct sock *sk)
+{
+ /*
+ * We need to be sure we are in sync with the
+ * add_wait_queue modifications to the wait queue.
+ *
+ * This memory barrier is paired in the sock_poll_wait.
+ */
+ smp_mb__after_lock();
+ return sk->sk_sleep && waitqueue_active(sk->sk_sleep);
+}
+
+/**
+ * sock_poll_wait - place memory barrier behind the poll_wait call.
+ * @filp: file
+ * @wait_address: socket wait queue
+ * @p: poll_table
+ *
+ * See the comments in the sk_has_sleeper function.
+ */
+static inline void sock_poll_wait(struct file *filp,
+ wait_queue_head_t *wait_address, poll_table *p)
+{
+ if (p && wait_address) {
+ poll_wait(filp, wait_address, p);
+ /*
+ * We need to be sure we are in sync with the
+ * socket flags modification.
+ *
+ * This memory barrier is paired in the sk_has_sleeper.
+ */
+ smp_mb();
+ }
+}
+
/*
* Queue a received datagram if it will fit. Stream and sequenced
* protocols can't normally use this as they need to fit buffers in
diff --git a/include/trace/events/ext4.h b/include/trace/events/ext4.h
index acf4cc9..dfbc9b0 100644
--- a/include/trace/events/ext4.h
+++ b/include/trace/events/ext4.h
@@ -34,7 +34,8 @@
TP_printk("dev %s ino %lu mode %d uid %u gid %u blocks %llu",
jbd2_dev_to_name(__entry->dev), __entry->ino, __entry->mode,
- __entry->uid, __entry->gid, __entry->blocks)
+ __entry->uid, __entry->gid,
+ (unsigned long long) __entry->blocks)
);
TRACE_EVENT(ext4_request_inode,
@@ -189,7 +190,7 @@
__entry->copied)
);
-TRACE_EVENT(ext4_da_writepage,
+TRACE_EVENT(ext4_writepage,
TP_PROTO(struct inode *inode, struct page *page),
TP_ARGS(inode, page),
@@ -341,49 +342,6 @@
__entry->copied)
);
-TRACE_EVENT(ext4_normal_writepage,
- TP_PROTO(struct inode *inode, struct page *page),
-
- TP_ARGS(inode, page),
-
- TP_STRUCT__entry(
- __field( dev_t, dev )
- __field( ino_t, ino )
- __field( pgoff_t, index )
- ),
-
- TP_fast_assign(
- __entry->dev = inode->i_sb->s_dev;
- __entry->ino = inode->i_ino;
- __entry->index = page->index;
- ),
-
- TP_printk("dev %s ino %lu page_index %lu",
- jbd2_dev_to_name(__entry->dev), __entry->ino, __entry->index)
-);
-
-TRACE_EVENT(ext4_journalled_writepage,
- TP_PROTO(struct inode *inode, struct page *page),
-
- TP_ARGS(inode, page),
-
- TP_STRUCT__entry(
- __field( dev_t, dev )
- __field( ino_t, ino )
- __field( pgoff_t, index )
-
- ),
-
- TP_fast_assign(
- __entry->dev = inode->i_sb->s_dev;
- __entry->ino = inode->i_ino;
- __entry->index = page->index;
- ),
-
- TP_printk("dev %s ino %lu page_index %lu",
- jbd2_dev_to_name(__entry->dev), __entry->ino, __entry->index)
-);
-
TRACE_EVENT(ext4_discard_blocks,
TP_PROTO(struct super_block *sb, unsigned long long blk,
unsigned long long count),
diff --git a/ipc/mqueue.c b/ipc/mqueue.c
index e35ba2c..c5e68ad 100644
--- a/ipc/mqueue.c
+++ b/ipc/mqueue.c
@@ -32,6 +32,7 @@
#include <linux/nsproxy.h>
#include <linux/pid.h>
#include <linux/ipc_namespace.h>
+#include <linux/ima.h>
#include <net/sock.h>
#include "util.h"
@@ -733,6 +734,7 @@
error = PTR_ERR(filp);
goto out_putfd;
}
+ ima_counts_get(filp);
fd_install(fd, filp);
goto out_upsem;
diff --git a/kernel/Makefile b/kernel/Makefile
index 780c8dc..2093a69 100644
--- a/kernel/Makefile
+++ b/kernel/Makefile
@@ -96,6 +96,7 @@
obj-$(CONFIG_FUNCTION_TRACER) += trace/
obj-$(CONFIG_TRACING) += trace/
obj-$(CONFIG_X86_DS) += trace/
+obj-$(CONFIG_RING_BUFFER) += trace/
obj-$(CONFIG_SMP) += sched_cpupri.o
obj-$(CONFIG_SLOW_WORK) += slow-work.o
obj-$(CONFIG_PERF_COUNTERS) += perf_counter.o
diff --git a/kernel/acct.c b/kernel/acct.c
index 7afa315..9f33910 100644
--- a/kernel/acct.c
+++ b/kernel/acct.c
@@ -215,6 +215,7 @@
static int acct_on(char *name)
{
struct file *file;
+ struct vfsmount *mnt;
int error;
struct pid_namespace *ns;
struct bsd_acct_struct *acct = NULL;
@@ -256,11 +257,12 @@
acct = NULL;
}
- mnt_pin(file->f_path.mnt);
+ mnt = file->f_path.mnt;
+ mnt_pin(mnt);
acct_file_reopen(ns->bacct, file, ns);
spin_unlock(&acct_lock);
- mntput(file->f_path.mnt); /* it's pinned, now give up active reference */
+ mntput(mnt); /* it's pinned, now give up active reference */
kfree(acct);
return 0;
diff --git a/kernel/exit.c b/kernel/exit.c
index 628d41f..869dc22 100644
--- a/kernel/exit.c
+++ b/kernel/exit.c
@@ -12,7 +12,6 @@
#include <linux/completion.h>
#include <linux/personality.h>
#include <linux/tty.h>
-#include <linux/mnt_namespace.h>
#include <linux/iocontext.h>
#include <linux/key.h>
#include <linux/security.h>
diff --git a/kernel/fork.c b/kernel/fork.c
index 467746b..bd29592 100644
--- a/kernel/fork.c
+++ b/kernel/fork.c
@@ -17,7 +17,6 @@
#include <linux/module.h>
#include <linux/vmalloc.h>
#include <linux/completion.h>
-#include <linux/mnt_namespace.h>
#include <linux/personality.h>
#include <linux/mempolicy.h>
#include <linux/sem.h>
diff --git a/kernel/futex.c b/kernel/futex.c
index 1c33711..794c862 100644
--- a/kernel/futex.c
+++ b/kernel/futex.c
@@ -299,7 +299,7 @@
static int fault_in_user_writeable(u32 __user *uaddr)
{
int ret = get_user_pages(current, current->mm, (unsigned long)uaddr,
- sizeof(*uaddr), 1, 0, NULL, NULL);
+ 1, 1, 0, NULL, NULL);
return ret < 0 ? ret : 0;
}
diff --git a/kernel/kmod.c b/kernel/kmod.c
index 7e95bed..385c31a 100644
--- a/kernel/kmod.c
+++ b/kernel/kmod.c
@@ -24,7 +24,6 @@
#include <linux/unistd.h>
#include <linux/kmod.h>
#include <linux/slab.h>
-#include <linux/mnt_namespace.h>
#include <linux/completion.h>
#include <linux/file.h>
#include <linux/fdtable.h>
diff --git a/kernel/kprobes.c b/kernel/kprobes.c
index c0fa54b..16b5739 100644
--- a/kernel/kprobes.c
+++ b/kernel/kprobes.c
@@ -237,13 +237,9 @@
{
struct kprobe_insn_page *kip;
struct hlist_node *pos, *next;
- int safety;
/* Ensure no-one is preepmted on the garbages */
- mutex_unlock(&kprobe_insn_mutex);
- safety = check_safety();
- mutex_lock(&kprobe_insn_mutex);
- if (safety != 0)
+ if (check_safety())
return -EAGAIN;
hlist_for_each_entry_safe(kip, pos, next, &kprobe_insn_pages, hlist) {
diff --git a/kernel/module.c b/kernel/module.c
index 38928fc..0a04983 100644
--- a/kernel/module.c
+++ b/kernel/module.c
@@ -2451,9 +2451,9 @@
return ret;
}
if (ret > 0) {
- printk(KERN_WARNING "%s: '%s'->init suspiciously returned %d, "
- "it should follow 0/-E convention\n"
- KERN_WARNING "%s: loading module anyway...\n",
+ printk(KERN_WARNING
+"%s: '%s'->init suspiciously returned %d, it should follow 0/-E convention\n"
+"%s: loading module anyway...\n",
__func__, mod->name, ret,
__func__);
dump_stack();
diff --git a/kernel/perf_counter.c b/kernel/perf_counter.c
index 1a933a2..a641eb7 100644
--- a/kernel/perf_counter.c
+++ b/kernel/perf_counter.c
@@ -236,6 +236,8 @@
list_add_rcu(&counter->event_entry, &ctx->event_list);
ctx->nr_counters++;
+ if (counter->attr.inherit_stat)
+ ctx->nr_stat++;
}
/*
@@ -250,6 +252,8 @@
if (list_empty(&counter->list_entry))
return;
ctx->nr_counters--;
+ if (counter->attr.inherit_stat)
+ ctx->nr_stat--;
list_del_init(&counter->list_entry);
list_del_rcu(&counter->event_entry);
@@ -1006,6 +1010,81 @@
&& !ctx1->pin_count && !ctx2->pin_count;
}
+static void __perf_counter_read(void *counter);
+
+static void __perf_counter_sync_stat(struct perf_counter *counter,
+ struct perf_counter *next_counter)
+{
+ u64 value;
+
+ if (!counter->attr.inherit_stat)
+ return;
+
+ /*
+ * Update the counter value, we cannot use perf_counter_read()
+ * because we're in the middle of a context switch and have IRQs
+ * disabled, which upsets smp_call_function_single(), however
+ * we know the counter must be on the current CPU, therefore we
+ * don't need to use it.
+ */
+ switch (counter->state) {
+ case PERF_COUNTER_STATE_ACTIVE:
+ __perf_counter_read(counter);
+ break;
+
+ case PERF_COUNTER_STATE_INACTIVE:
+ update_counter_times(counter);
+ break;
+
+ default:
+ break;
+ }
+
+ /*
+ * In order to keep per-task stats reliable we need to flip the counter
+ * values when we flip the contexts.
+ */
+ value = atomic64_read(&next_counter->count);
+ value = atomic64_xchg(&counter->count, value);
+ atomic64_set(&next_counter->count, value);
+
+ swap(counter->total_time_enabled, next_counter->total_time_enabled);
+ swap(counter->total_time_running, next_counter->total_time_running);
+
+ /*
+ * Since we swizzled the values, update the user visible data too.
+ */
+ perf_counter_update_userpage(counter);
+ perf_counter_update_userpage(next_counter);
+}
+
+#define list_next_entry(pos, member) \
+ list_entry(pos->member.next, typeof(*pos), member)
+
+static void perf_counter_sync_stat(struct perf_counter_context *ctx,
+ struct perf_counter_context *next_ctx)
+{
+ struct perf_counter *counter, *next_counter;
+
+ if (!ctx->nr_stat)
+ return;
+
+ counter = list_first_entry(&ctx->event_list,
+ struct perf_counter, event_entry);
+
+ next_counter = list_first_entry(&next_ctx->event_list,
+ struct perf_counter, event_entry);
+
+ while (&counter->event_entry != &ctx->event_list &&
+ &next_counter->event_entry != &next_ctx->event_list) {
+
+ __perf_counter_sync_stat(counter, next_counter);
+
+ counter = list_next_entry(counter, event_entry);
+ next_counter = list_next_entry(counter, event_entry);
+ }
+}
+
/*
* Called from scheduler to remove the counters of the current task,
* with interrupts disabled.
@@ -1061,6 +1140,8 @@
ctx->task = next;
next_ctx->task = task;
do_switch = 0;
+
+ perf_counter_sync_stat(ctx, next_ctx);
}
spin_unlock(&next_ctx->lock);
spin_unlock(&ctx->lock);
@@ -1348,9 +1429,56 @@
}
/*
+ * Enable all of a task's counters that have been marked enable-on-exec.
+ * This expects task == current.
+ */
+static void perf_counter_enable_on_exec(struct task_struct *task)
+{
+ struct perf_counter_context *ctx;
+ struct perf_counter *counter;
+ unsigned long flags;
+ int enabled = 0;
+
+ local_irq_save(flags);
+ ctx = task->perf_counter_ctxp;
+ if (!ctx || !ctx->nr_counters)
+ goto out;
+
+ __perf_counter_task_sched_out(ctx);
+
+ spin_lock(&ctx->lock);
+
+ list_for_each_entry(counter, &ctx->counter_list, list_entry) {
+ if (!counter->attr.enable_on_exec)
+ continue;
+ counter->attr.enable_on_exec = 0;
+ if (counter->state >= PERF_COUNTER_STATE_INACTIVE)
+ continue;
+ counter->state = PERF_COUNTER_STATE_INACTIVE;
+ counter->tstamp_enabled =
+ ctx->time - counter->total_time_enabled;
+ enabled = 1;
+ }
+
+ /*
+ * Unclone this context if we enabled any counter.
+ */
+ if (enabled && ctx->parent_ctx) {
+ put_ctx(ctx->parent_ctx);
+ ctx->parent_ctx = NULL;
+ }
+
+ spin_unlock(&ctx->lock);
+
+ perf_counter_task_sched_in(task, smp_processor_id());
+ out:
+ local_irq_restore(flags);
+}
+
+/*
* Cross CPU call to read the hardware counter
*/
-static void __read(void *info)
+static void __perf_counter_read(void *info)
{
struct perf_counter *counter = info;
struct perf_counter_context *ctx = counter->ctx;
@@ -1372,7 +1500,7 @@
*/
if (counter->state == PERF_COUNTER_STATE_ACTIVE) {
smp_call_function_single(counter->oncpu,
- __read, counter, 1);
+ __perf_counter_read, counter, 1);
} else if (counter->state == PERF_COUNTER_STATE_INACTIVE) {
update_counter_times(counter);
}
@@ -1508,11 +1636,13 @@
{
perf_pending_sync(counter);
- atomic_dec(&nr_counters);
- if (counter->attr.mmap)
- atomic_dec(&nr_mmap_counters);
- if (counter->attr.comm)
- atomic_dec(&nr_comm_counters);
+ if (!counter->parent) {
+ atomic_dec(&nr_counters);
+ if (counter->attr.mmap)
+ atomic_dec(&nr_mmap_counters);
+ if (counter->attr.comm)
+ atomic_dec(&nr_comm_counters);
+ }
if (counter->destroy)
counter->destroy(counter);
@@ -1751,6 +1881,14 @@
return 0;
}
+static int perf_counter_index(struct perf_counter *counter)
+{
+ if (counter->state != PERF_COUNTER_STATE_ACTIVE)
+ return 0;
+
+ return counter->hw.idx + 1 - PERF_COUNTER_INDEX_OFFSET;
+}
+
/*
* Callers need to ensure there can be no nesting of this function, otherwise
* the seqlock logic goes bad. We can not serialize this because the arch
@@ -1775,11 +1913,17 @@
preempt_disable();
++userpg->lock;
barrier();
- userpg->index = counter->hw.idx;
+ userpg->index = perf_counter_index(counter);
userpg->offset = atomic64_read(&counter->count);
if (counter->state == PERF_COUNTER_STATE_ACTIVE)
userpg->offset -= atomic64_read(&counter->hw.prev_count);
+ userpg->time_enabled = counter->total_time_enabled +
+ atomic64_read(&counter->child_total_time_enabled);
+
+ userpg->time_running = counter->total_time_running +
+ atomic64_read(&counter->child_total_time_running);
+
barrier();
++userpg->lock;
preempt_enable();
@@ -1876,7 +2020,7 @@
static void perf_mmap_free_page(unsigned long addr)
{
- struct page *page = virt_to_page(addr);
+ struct page *page = virt_to_page((void *)addr);
page->mapping = NULL;
__free_page(page);
@@ -2483,15 +2627,14 @@
u32 cpu, reserved;
} cpu_entry;
- header.type = 0;
+ header.type = PERF_EVENT_SAMPLE;
header.size = sizeof(header);
- header.misc = PERF_EVENT_MISC_OVERFLOW;
+ header.misc = 0;
header.misc |= perf_misc_flags(data->regs);
if (sample_type & PERF_SAMPLE_IP) {
ip = perf_instruction_pointer(data->regs);
- header.type |= PERF_SAMPLE_IP;
header.size += sizeof(ip);
}
@@ -2500,7 +2643,6 @@
tid_entry.pid = perf_counter_pid(counter, current);
tid_entry.tid = perf_counter_tid(counter, current);
- header.type |= PERF_SAMPLE_TID;
header.size += sizeof(tid_entry);
}
@@ -2510,34 +2652,25 @@
*/
time = sched_clock();
- header.type |= PERF_SAMPLE_TIME;
header.size += sizeof(u64);
}
- if (sample_type & PERF_SAMPLE_ADDR) {
- header.type |= PERF_SAMPLE_ADDR;
+ if (sample_type & PERF_SAMPLE_ADDR)
header.size += sizeof(u64);
- }
- if (sample_type & PERF_SAMPLE_ID) {
- header.type |= PERF_SAMPLE_ID;
+ if (sample_type & PERF_SAMPLE_ID)
header.size += sizeof(u64);
- }
if (sample_type & PERF_SAMPLE_CPU) {
- header.type |= PERF_SAMPLE_CPU;
header.size += sizeof(cpu_entry);
cpu_entry.cpu = raw_smp_processor_id();
}
- if (sample_type & PERF_SAMPLE_PERIOD) {
- header.type |= PERF_SAMPLE_PERIOD;
+ if (sample_type & PERF_SAMPLE_PERIOD)
header.size += sizeof(u64);
- }
if (sample_type & PERF_SAMPLE_GROUP) {
- header.type |= PERF_SAMPLE_GROUP;
header.size += sizeof(u64) +
counter->nr_siblings * sizeof(group_entry);
}
@@ -2547,10 +2680,9 @@
if (callchain) {
callchain_size = (1 + callchain->nr) * sizeof(u64);
-
- header.type |= PERF_SAMPLE_CALLCHAIN;
header.size += callchain_size;
- }
+ } else
+ header.size += sizeof(u64);
}
ret = perf_output_begin(&handle, counter, header.size, nmi, 1);
@@ -2601,13 +2733,79 @@
}
}
- if (callchain)
- perf_output_copy(&handle, callchain, callchain_size);
+ if (sample_type & PERF_SAMPLE_CALLCHAIN) {
+ if (callchain)
+ perf_output_copy(&handle, callchain, callchain_size);
+ else {
+ u64 nr = 0;
+ perf_output_put(&handle, nr);
+ }
+ }
perf_output_end(&handle);
}
/*
+ * read event
+ */
+
+struct perf_read_event {
+ struct perf_event_header header;
+
+ u32 pid;
+ u32 tid;
+ u64 value;
+ u64 format[3];
+};
+
+static void
+perf_counter_read_event(struct perf_counter *counter,
+ struct task_struct *task)
+{
+ struct perf_output_handle handle;
+ struct perf_read_event event = {
+ .header = {
+ .type = PERF_EVENT_READ,
+ .misc = 0,
+ .size = sizeof(event) - sizeof(event.format),
+ },
+ .pid = perf_counter_pid(counter, task),
+ .tid = perf_counter_tid(counter, task),
+ .value = atomic64_read(&counter->count),
+ };
+ int ret, i = 0;
+
+ if (counter->attr.read_format & PERF_FORMAT_TOTAL_TIME_ENABLED) {
+ event.header.size += sizeof(u64);
+ event.format[i++] = counter->total_time_enabled;
+ }
+
+ if (counter->attr.read_format & PERF_FORMAT_TOTAL_TIME_RUNNING) {
+ event.header.size += sizeof(u64);
+ event.format[i++] = counter->total_time_running;
+ }
+
+ if (counter->attr.read_format & PERF_FORMAT_ID) {
+ u64 id;
+
+ event.header.size += sizeof(u64);
+ if (counter->parent)
+ id = counter->parent->id;
+ else
+ id = counter->id;
+
+ event.format[i++] = id;
+ }
+
+ ret = perf_output_begin(&handle, counter, event.header.size, 0, 0);
+ if (ret)
+ return;
+
+ perf_output_copy(&handle, &event, event.header.size);
+ perf_output_end(&handle);
+}
+
+/*
* fork tracking
*/
@@ -2798,6 +2996,9 @@
{
struct perf_comm_event comm_event;
+ if (task->perf_counter_ctxp)
+ perf_counter_enable_on_exec(task);
+
if (!atomic_read(&nr_comm_counters))
return;
@@ -3317,8 +3518,8 @@
put_cpu_var(perf_cpu_context);
}
-void
-perf_swcounter_event(u32 event, u64 nr, int nmi, struct pt_regs *regs, u64 addr)
+void __perf_swcounter_event(u32 event, u64 nr, int nmi,
+ struct pt_regs *regs, u64 addr)
{
struct perf_sample_data data = {
.regs = regs,
@@ -3509,9 +3710,21 @@
}
#endif
+atomic_t perf_swcounter_enabled[PERF_COUNT_SW_MAX];
+
+static void sw_perf_counter_destroy(struct perf_counter *counter)
+{
+ u64 event = counter->attr.config;
+
+ WARN_ON(counter->parent);
+
+ atomic_dec(&perf_swcounter_enabled[event]);
+}
+
static const struct pmu *sw_perf_counter_init(struct perf_counter *counter)
{
const struct pmu *pmu = NULL;
+ u64 event = counter->attr.config;
/*
* Software counters (currently) can't in general distinguish
@@ -3520,7 +3733,7 @@
* to be kernel events, and page faults are never hypervisor
* events.
*/
- switch (counter->attr.config) {
+ switch (event) {
case PERF_COUNT_SW_CPU_CLOCK:
pmu = &perf_ops_cpu_clock;
@@ -3541,6 +3754,10 @@
case PERF_COUNT_SW_PAGE_FAULTS_MAJ:
case PERF_COUNT_SW_CONTEXT_SWITCHES:
case PERF_COUNT_SW_CPU_MIGRATIONS:
+ if (!counter->parent) {
+ atomic_inc(&perf_swcounter_enabled[event]);
+ counter->destroy = sw_perf_counter_destroy;
+ }
pmu = &perf_ops_generic;
break;
}
@@ -3556,6 +3773,7 @@
int cpu,
struct perf_counter_context *ctx,
struct perf_counter *group_leader,
+ struct perf_counter *parent_counter,
gfp_t gfpflags)
{
const struct pmu *pmu;
@@ -3591,6 +3809,8 @@
counter->ctx = ctx;
counter->oncpu = -1;
+ counter->parent = parent_counter;
+
counter->ns = get_pid_ns(current->nsproxy->pid_ns);
counter->id = atomic64_inc_return(&perf_counter_id);
@@ -3648,11 +3868,13 @@
counter->pmu = pmu;
- atomic_inc(&nr_counters);
- if (counter->attr.mmap)
- atomic_inc(&nr_mmap_counters);
- if (counter->attr.comm)
- atomic_inc(&nr_comm_counters);
+ if (!counter->parent) {
+ atomic_inc(&nr_counters);
+ if (counter->attr.mmap)
+ atomic_inc(&nr_mmap_counters);
+ if (counter->attr.comm)
+ atomic_inc(&nr_comm_counters);
+ }
return counter;
}
@@ -3815,7 +4037,7 @@
}
counter = perf_counter_alloc(&attr, cpu, ctx, group_leader,
- GFP_KERNEL);
+ NULL, GFP_KERNEL);
ret = PTR_ERR(counter);
if (IS_ERR(counter))
goto err_put_context;
@@ -3881,7 +4103,8 @@
child_counter = perf_counter_alloc(&parent_counter->attr,
parent_counter->cpu, child_ctx,
- group_leader, GFP_KERNEL);
+ group_leader, parent_counter,
+ GFP_KERNEL);
if (IS_ERR(child_counter))
return child_counter;
get_ctx(child_ctx);
@@ -3904,12 +4127,6 @@
*/
add_counter_to_ctx(child_counter, child_ctx);
- child_counter->parent = parent_counter;
- /*
- * inherit into child's child as well:
- */
- child_counter->attr.inherit = 1;
-
/*
* Get a reference to the parent filp - we will fput it
* when the child counter exits. This is safe to do because
@@ -3953,10 +4170,14 @@
}
static void sync_child_counter(struct perf_counter *child_counter,
- struct perf_counter *parent_counter)
+ struct task_struct *child)
{
+ struct perf_counter *parent_counter = child_counter->parent;
u64 child_val;
+ if (child_counter->attr.inherit_stat)
+ perf_counter_read_event(child_counter, child);
+
child_val = atomic64_read(&child_counter->count);
/*
@@ -3985,7 +4206,8 @@
static void
__perf_counter_exit_task(struct perf_counter *child_counter,
- struct perf_counter_context *child_ctx)
+ struct perf_counter_context *child_ctx,
+ struct task_struct *child)
{
struct perf_counter *parent_counter;
@@ -3999,7 +4221,7 @@
* counters need to be zapped - but otherwise linger.
*/
if (parent_counter) {
- sync_child_counter(child_counter, parent_counter);
+ sync_child_counter(child_counter, child);
free_counter(child_counter);
}
}
@@ -4061,7 +4283,7 @@
again:
list_for_each_entry_safe(child_counter, tmp, &child_ctx->counter_list,
list_entry)
- __perf_counter_exit_task(child_counter, child_ctx);
+ __perf_counter_exit_task(child_counter, child_ctx, child);
/*
* If the last counter was a group counter, it will have appended all
diff --git a/kernel/power/user.c b/kernel/power/user.c
index ed97375..bf0014d 100644
--- a/kernel/power/user.c
+++ b/kernel/power/user.c
@@ -23,7 +23,6 @@
#include <linux/console.h>
#include <linux/cpu.h>
#include <linux/freezer.h>
-#include <linux/smp_lock.h>
#include <scsi/scsi_scan.h>
#include <asm/uaccess.h>
diff --git a/kernel/ptrace.c b/kernel/ptrace.c
index 61c78b2..082c320 100644
--- a/kernel/ptrace.c
+++ b/kernel/ptrace.c
@@ -181,8 +181,8 @@
* interference; SUID, SGID and LSM creds get determined differently
* under ptrace.
*/
- retval = mutex_lock_interruptible(&task->cred_guard_mutex);
- if (retval < 0)
+ retval = -ERESTARTNOINTR;
+ if (mutex_lock_interruptible(&task->cred_guard_mutex))
goto out;
task_lock(task);
diff --git a/kernel/rcutree.c b/kernel/rcutree.c
index 0dccfbb..7717b95 100644
--- a/kernel/rcutree.c
+++ b/kernel/rcutree.c
@@ -1533,7 +1533,7 @@
int j;
struct rcu_node *rnp;
- printk(KERN_WARNING "Experimental hierarchical RCU implementation.\n");
+ printk(KERN_INFO "Hierarchical RCU implementation.\n");
#ifdef CONFIG_RCU_CPU_STALL_DETECTOR
printk(KERN_INFO "RCU-based detection of stalled CPUs is enabled.\n");
#endif /* #ifdef CONFIG_RCU_CPU_STALL_DETECTOR */
@@ -1546,7 +1546,6 @@
rcu_cpu_notify(&rcu_nb, CPU_UP_PREPARE, (void *)(long)i);
/* Register notifier for non-boot CPUs */
register_cpu_notifier(&rcu_nb);
- printk(KERN_WARNING "Experimental hierarchical RCU init done.\n");
}
module_param(blimit, int, 0);
diff --git a/kernel/resource.c b/kernel/resource.c
index ac5f3a3..78b0872 100644
--- a/kernel/resource.c
+++ b/kernel/resource.c
@@ -787,7 +787,7 @@
static struct resource reserve[MAXRESERVE];
for (;;) {
- int io_start, io_num;
+ unsigned int io_start, io_num;
int x = reserved;
if (get_option (&str, &io_start) != 2)
diff --git a/kernel/sched.c b/kernel/sched.c
index 7c9098d..01f55ad 100644
--- a/kernel/sched.c
+++ b/kernel/sched.c
@@ -6541,6 +6541,11 @@
return 0;
}
+static inline int should_resched(void)
+{
+ return need_resched() && !(preempt_count() & PREEMPT_ACTIVE);
+}
+
static void __cond_resched(void)
{
#ifdef CONFIG_DEBUG_SPINLOCK_SLEEP
@@ -6560,8 +6565,7 @@
int __sched _cond_resched(void)
{
- if (need_resched() && !(preempt_count() & PREEMPT_ACTIVE) &&
- system_state == SYSTEM_RUNNING) {
+ if (should_resched()) {
__cond_resched();
return 1;
}
@@ -6579,12 +6583,12 @@
*/
int cond_resched_lock(spinlock_t *lock)
{
- int resched = need_resched() && system_state == SYSTEM_RUNNING;
+ int resched = should_resched();
int ret = 0;
if (spin_needbreak(lock) || resched) {
spin_unlock(lock);
- if (resched && need_resched())
+ if (resched)
__cond_resched();
else
cpu_relax();
@@ -6599,7 +6603,7 @@
{
BUG_ON(!in_softirq());
- if (need_resched() && system_state == SYSTEM_RUNNING) {
+ if (should_resched()) {
local_bh_enable();
__cond_resched();
local_bh_disable();
diff --git a/kernel/sysctl.c b/kernel/sysctl.c
index 62e4ff9..98e0232 100644
--- a/kernel/sysctl.c
+++ b/kernel/sysctl.c
@@ -335,7 +335,10 @@
.data = &sysctl_timer_migration,
.maxlen = sizeof(unsigned int),
.mode = 0644,
- .proc_handler = &proc_dointvec,
+ .proc_handler = &proc_dointvec_minmax,
+ .strategy = &sysctl_intvec,
+ .extra1 = &zero,
+ .extra2 = &one,
},
#endif
{
@@ -744,6 +747,14 @@
.proc_handler = &proc_dointvec,
},
{
+ .ctl_name = CTL_UNNUMBERED,
+ .procname = "panic_on_io_nmi",
+ .data = &panic_on_io_nmi,
+ .maxlen = sizeof(int),
+ .mode = 0644,
+ .proc_handler = &proc_dointvec,
+ },
+ {
.ctl_name = KERN_BOOTLOADER_TYPE,
.procname = "bootloader_type",
.data = &bootloader_type,
diff --git a/kernel/time/timer_stats.c b/kernel/time/timer_stats.c
index c994530..4cde8b9 100644
--- a/kernel/time/timer_stats.c
+++ b/kernel/time/timer_stats.c
@@ -96,7 +96,7 @@
/*
* Collection status, active/inactive:
*/
-static int __read_mostly active;
+int __read_mostly timer_stats_active;
/*
* Beginning/end timestamps of measurement:
@@ -242,7 +242,7 @@
struct entry *entry, input;
unsigned long flags;
- if (likely(!active))
+ if (likely(!timer_stats_active))
return;
lock = &per_cpu(lookup_lock, raw_smp_processor_id());
@@ -254,7 +254,7 @@
input.timer_flag = timer_flag;
spin_lock_irqsave(lock, flags);
- if (!active)
+ if (!timer_stats_active)
goto out_unlock;
entry = tstat_lookup(&input, comm);
@@ -290,7 +290,7 @@
/*
* If still active then calculate up to now:
*/
- if (active)
+ if (timer_stats_active)
time_stop = ktime_get();
time = ktime_sub(time_stop, time_start);
@@ -368,18 +368,18 @@
mutex_lock(&show_mutex);
switch (ctl[0]) {
case '0':
- if (active) {
- active = 0;
+ if (timer_stats_active) {
+ timer_stats_active = 0;
time_stop = ktime_get();
sync_access();
}
break;
case '1':
- if (!active) {
+ if (!timer_stats_active) {
reset_entries();
time_start = ktime_get();
smp_mb();
- active = 1;
+ timer_stats_active = 1;
}
break;
default:
diff --git a/kernel/timer.c b/kernel/timer.c
index 54d3912..0b36b9e 100644
--- a/kernel/timer.c
+++ b/kernel/timer.c
@@ -380,6 +380,8 @@
{
unsigned int flag = 0;
+ if (likely(!timer->start_site))
+ return;
if (unlikely(tbase_get_deferrable(timer->base)))
flag |= TIMER_STATS_FLAG_DEFERRABLE;
diff --git a/kernel/trace/Kconfig b/kernel/trace/Kconfig
index 1551f47..019f380 100644
--- a/kernel/trace/Kconfig
+++ b/kernel/trace/Kconfig
@@ -226,13 +226,13 @@
the timings of the initcalls and traces key events and the identity
of tasks that can cause boot delays, such as context-switches.
- Its aim is to be parsed by the /scripts/bootgraph.pl tool to
+ Its aim is to be parsed by the scripts/bootgraph.pl tool to
produce pretty graphics about boot inefficiencies, giving a visual
representation of the delays during initcalls - but the raw
/debug/tracing/trace text output is readable too.
- You must pass in ftrace=initcall to the kernel command line
- to enable this on bootup.
+ You must pass in initcall_debug and ftrace=initcall to the kernel
+ command line to enable this on bootup.
config TRACE_BRANCH_PROFILING
bool
diff --git a/kernel/trace/blktrace.c b/kernel/trace/blktrace.c
index 39af8af..1090b0a 100644
--- a/kernel/trace/blktrace.c
+++ b/kernel/trace/blktrace.c
@@ -22,6 +22,7 @@
#include <linux/init.h>
#include <linux/mutex.h>
#include <linux/debugfs.h>
+#include <linux/smp_lock.h>
#include <linux/time.h>
#include <linux/uaccess.h>
diff --git a/kernel/trace/ftrace.c b/kernel/trace/ftrace.c
index 3718d55..bce9e01 100644
--- a/kernel/trace/ftrace.c
+++ b/kernel/trace/ftrace.c
@@ -291,7 +291,9 @@
pg = (struct ftrace_profile_page *)((unsigned long)rec & PAGE_MASK);
again:
- rec++;
+ if (idx != 0)
+ rec++;
+
if ((void *)rec >= (void *)&pg->records[pg->index]) {
pg = pg->next;
if (!pg)
@@ -1417,10 +1419,20 @@
{
struct ftrace_iterator *iter = m->private;
void *p = NULL;
+ loff_t l;
+
+ if (!(iter->flags & FTRACE_ITER_HASH))
+ *pos = 0;
iter->flags |= FTRACE_ITER_HASH;
- return t_hash_next(m, p, pos);
+ iter->hidx = 0;
+ for (l = 0; l <= *pos; ) {
+ p = t_hash_next(m, p, &l);
+ if (!p)
+ break;
+ }
+ return p;
}
static int t_hash_show(struct seq_file *m, void *v)
@@ -1467,8 +1479,6 @@
iter->pg = iter->pg->next;
iter->idx = 0;
goto retry;
- } else {
- iter->idx = -1;
}
} else {
rec = &iter->pg->records[iter->idx++];
@@ -1497,6 +1507,7 @@
{
struct ftrace_iterator *iter = m->private;
void *p = NULL;
+ loff_t l;
mutex_lock(&ftrace_lock);
/*
@@ -1508,23 +1519,21 @@
if (*pos > 0)
return t_hash_start(m, pos);
iter->flags |= FTRACE_ITER_PRINTALL;
- (*pos)++;
return iter;
}
if (iter->flags & FTRACE_ITER_HASH)
return t_hash_start(m, pos);
- if (*pos > 0) {
- if (iter->idx < 0)
- return p;
- (*pos)--;
- iter->idx--;
+ iter->pg = ftrace_pages_start;
+ iter->idx = 0;
+ for (l = 0; l <= *pos; ) {
+ p = t_next(m, p, &l);
+ if (!p)
+ break;
}
- p = t_next(m, p, pos);
-
- if (!p)
+ if (!p && iter->flags & FTRACE_ITER_FILTER)
return t_hash_start(m, pos);
return p;
@@ -2500,32 +2509,31 @@
unsigned long ftrace_graph_funcs[FTRACE_GRAPH_MAX_FUNCS] __read_mostly;
static void *
-g_next(struct seq_file *m, void *v, loff_t *pos)
+__g_next(struct seq_file *m, loff_t *pos)
{
unsigned long *array = m->private;
- int index = *pos;
- (*pos)++;
-
- if (index >= ftrace_graph_count)
+ if (*pos >= ftrace_graph_count)
return NULL;
+ return &array[*pos];
+}
- return &array[index];
+static void *
+g_next(struct seq_file *m, void *v, loff_t *pos)
+{
+ (*pos)++;
+ return __g_next(m, pos);
}
static void *g_start(struct seq_file *m, loff_t *pos)
{
- void *p = NULL;
-
mutex_lock(&graph_lock);
/* Nothing, tell g_show to print all functions are enabled */
if (!ftrace_graph_count && !*pos)
return (void *)1;
- p = g_next(m, p, pos);
-
- return p;
+ return __g_next(m, pos);
}
static void g_stop(struct seq_file *m, void *p)
@@ -3152,10 +3160,10 @@
ret = proc_dointvec(table, write, file, buffer, lenp, ppos);
- if (ret || !write || (last_ftrace_enabled == ftrace_enabled))
+ if (ret || !write || (last_ftrace_enabled == !!ftrace_enabled))
goto out;
- last_ftrace_enabled = ftrace_enabled;
+ last_ftrace_enabled = !!ftrace_enabled;
if (ftrace_enabled) {
diff --git a/kernel/trace/ring_buffer.c b/kernel/trace/ring_buffer.c
index 04dac26..bf27bb7 100644
--- a/kernel/trace/ring_buffer.c
+++ b/kernel/trace/ring_buffer.c
@@ -1563,6 +1563,8 @@
return NULL;
}
+#ifdef CONFIG_TRACING
+
#define TRACE_RECURSIVE_DEPTH 16
static int trace_recursive_lock(void)
@@ -1593,6 +1595,13 @@
current->trace_recursion--;
}
+#else
+
+#define trace_recursive_lock() (0)
+#define trace_recursive_unlock() do { } while (0)
+
+#endif
+
static DEFINE_PER_CPU(int, rb_need_resched);
/**
@@ -3104,6 +3113,7 @@
}
EXPORT_SYMBOL_GPL(ring_buffer_read_page);
+#ifdef CONFIG_TRACING
static ssize_t
rb_simple_read(struct file *filp, char __user *ubuf,
size_t cnt, loff_t *ppos)
@@ -3171,6 +3181,7 @@
}
fs_initcall(rb_init_debugfs);
+#endif
#ifdef CONFIG_HOTPLUG_CPU
static int rb_cpu_notify(struct notifier_block *self,
diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c
index 076fa6f..8bc8d8a 100644
--- a/kernel/trace/trace.c
+++ b/kernel/trace/trace.c
@@ -17,6 +17,7 @@
#include <linux/writeback.h>
#include <linux/kallsyms.h>
#include <linux/seq_file.h>
+#include <linux/smp_lock.h>
#include <linux/notifier.h>
#include <linux/irqflags.h>
#include <linux/debugfs.h>
@@ -284,13 +285,12 @@
static int __init set_buf_size(char *str)
{
unsigned long buf_size;
- int ret;
if (!str)
return 0;
- ret = strict_strtoul(str, 0, &buf_size);
+ buf_size = memparse(str, &str);
/* nr_entries can not be zero */
- if (ret < 0 || buf_size == 0)
+ if (buf_size == 0)
return 0;
trace_buf_size = buf_size;
return 1;
@@ -2053,25 +2053,23 @@
static void *
t_next(struct seq_file *m, void *v, loff_t *pos)
{
- struct tracer *t = m->private;
+ struct tracer *t = v;
(*pos)++;
if (t)
t = t->next;
- m->private = t;
-
return t;
}
static void *t_start(struct seq_file *m, loff_t *pos)
{
- struct tracer *t = m->private;
+ struct tracer *t;
loff_t l = 0;
mutex_lock(&trace_types_lock);
- for (; t && l < *pos; t = t_next(m, t, &l))
+ for (t = trace_types; t && l < *pos; t = t_next(m, t, &l))
;
return t;
@@ -2107,18 +2105,10 @@
static int show_traces_open(struct inode *inode, struct file *file)
{
- int ret;
-
if (tracing_disabled)
return -ENODEV;
- ret = seq_open(file, &show_traces_seq_ops);
- if (!ret) {
- struct seq_file *m = file->private_data;
- m->private = trace_types;
- }
-
- return ret;
+ return seq_open(file, &show_traces_seq_ops);
}
static ssize_t
diff --git a/kernel/trace/trace.h b/kernel/trace/trace.h
index 6e735d4..3548ae5 100644
--- a/kernel/trace/trace.h
+++ b/kernel/trace/trace.h
@@ -597,6 +597,7 @@
extern struct pid *ftrace_pid_trace;
+#ifdef CONFIG_FUNCTION_TRACER
static inline int ftrace_trace_task(struct task_struct *task)
{
if (!ftrace_pid_trace)
@@ -604,6 +605,12 @@
return test_tsk_trace_trace(task);
}
+#else
+static inline int ftrace_trace_task(struct task_struct *task)
+{
+ return 1;
+}
+#endif
/*
* trace_iterator_flags is an enumeration that defines bit
diff --git a/kernel/trace/trace_event_types.h b/kernel/trace/trace_event_types.h
index 5e32e37..6db005e 100644
--- a/kernel/trace/trace_event_types.h
+++ b/kernel/trace/trace_event_types.h
@@ -26,6 +26,9 @@
ftrace_graph_ret_entry, ignore,
TRACE_STRUCT(
TRACE_FIELD(unsigned long, ret.func, func)
+ TRACE_FIELD(unsigned long long, ret.calltime, calltime)
+ TRACE_FIELD(unsigned long long, ret.rettime, rettime)
+ TRACE_FIELD(unsigned long, ret.overrun, overrun)
TRACE_FIELD(int, ret.depth, depth)
),
TP_RAW_FMT("<-- %lx (%d)")
diff --git a/kernel/trace/trace_events.c b/kernel/trace/trace_events.c
index aa08be6..53c8fd3 100644
--- a/kernel/trace/trace_events.c
+++ b/kernel/trace/trace_events.c
@@ -300,10 +300,18 @@
static void *t_start(struct seq_file *m, loff_t *pos)
{
+ struct ftrace_event_call *call = NULL;
+ loff_t l;
+
mutex_lock(&event_mutex);
- if (*pos == 0)
- m->private = ftrace_events.next;
- return t_next(m, NULL, pos);
+
+ m->private = ftrace_events.next;
+ for (l = 0; l <= *pos; ) {
+ call = t_next(m, NULL, &l);
+ if (!call)
+ break;
+ }
+ return call;
}
static void *
@@ -332,10 +340,18 @@
static void *s_start(struct seq_file *m, loff_t *pos)
{
+ struct ftrace_event_call *call = NULL;
+ loff_t l;
+
mutex_lock(&event_mutex);
- if (*pos == 0)
- m->private = ftrace_events.next;
- return s_next(m, NULL, pos);
+
+ m->private = ftrace_events.next;
+ for (l = 0; l <= *pos; ) {
+ call = s_next(m, NULL, &l);
+ if (!call)
+ break;
+ }
+ return call;
}
static int t_show(struct seq_file *m, void *v)
diff --git a/kernel/trace/trace_functions.c b/kernel/trace/trace_functions.c
index 90f1347..7402144 100644
--- a/kernel/trace/trace_functions.c
+++ b/kernel/trace/trace_functions.c
@@ -302,8 +302,7 @@
if (count == -1)
seq_printf(m, ":unlimited\n");
else
- seq_printf(m, ":count=%ld", count);
- seq_putc(m, '\n');
+ seq_printf(m, ":count=%ld\n", count);
return 0;
}
diff --git a/kernel/trace/trace_output.c b/kernel/trace/trace_output.c
index 7938f3a..e0c2545 100644
--- a/kernel/trace/trace_output.c
+++ b/kernel/trace/trace_output.c
@@ -27,8 +27,7 @@
{
int len = s->len >= PAGE_SIZE ? PAGE_SIZE - 1 : s->len;
- s->buffer[len] = 0;
- seq_puts(m, s->buffer);
+ seq_write(m, s->buffer, len);
trace_seq_init(s);
}
diff --git a/kernel/trace/trace_printk.c b/kernel/trace/trace_printk.c
index 9bece96..7b62781 100644
--- a/kernel/trace/trace_printk.c
+++ b/kernel/trace/trace_printk.c
@@ -155,25 +155,19 @@
EXPORT_SYMBOL_GPL(__ftrace_vprintk);
static void *
-t_next(struct seq_file *m, void *v, loff_t *pos)
+t_start(struct seq_file *m, loff_t *pos)
{
- const char **fmt = m->private;
- const char **next = fmt;
-
- (*pos)++;
+ const char **fmt = __start___trace_bprintk_fmt + *pos;
if ((unsigned long)fmt >= (unsigned long)__stop___trace_bprintk_fmt)
return NULL;
-
- next = fmt;
- m->private = ++next;
-
return fmt;
}
-static void *t_start(struct seq_file *m, loff_t *pos)
+static void *t_next(struct seq_file *m, void * v, loff_t *pos)
{
- return t_next(m, NULL, pos);
+ (*pos)++;
+ return t_start(m, pos);
}
static int t_show(struct seq_file *m, void *v)
@@ -224,15 +218,7 @@
static int
ftrace_formats_open(struct inode *inode, struct file *file)
{
- int ret;
-
- ret = seq_open(file, &show_format_seq_ops);
- if (!ret) {
- struct seq_file *m = file->private_data;
-
- m->private = __start___trace_bprintk_fmt;
- }
- return ret;
+ return seq_open(file, &show_format_seq_ops);
}
static const struct file_operations ftrace_formats_fops = {
diff --git a/kernel/trace/trace_stack.c b/kernel/trace/trace_stack.c
index 2d7aebd..e644af9 100644
--- a/kernel/trace/trace_stack.c
+++ b/kernel/trace/trace_stack.c
@@ -326,10 +326,10 @@
ret = proc_dointvec(table, write, file, buffer, lenp, ppos);
if (ret || !write ||
- (last_stack_tracer_enabled == stack_tracer_enabled))
+ (last_stack_tracer_enabled == !!stack_tracer_enabled))
goto out;
- last_stack_tracer_enabled = stack_tracer_enabled;
+ last_stack_tracer_enabled = !!stack_tracer_enabled;
if (stack_tracer_enabled)
register_ftrace_function(&trace_ops);
diff --git a/kernel/trace/trace_stat.c b/kernel/trace/trace_stat.c
index c006437..e66f5e4 100644
--- a/kernel/trace/trace_stat.c
+++ b/kernel/trace/trace_stat.c
@@ -199,17 +199,13 @@
mutex_lock(&session->stat_mutex);
/* If we are in the beginning of the file, print the headers */
- if (!*pos && session->ts->stat_headers) {
- (*pos)++;
+ if (!*pos && session->ts->stat_headers)
return SEQ_START_TOKEN;
- }
node = rb_first(&session->stat_root);
for (i = 0; node && i < *pos; i++)
node = rb_next(node);
- (*pos)++;
-
return node;
}
diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug
index 4c32b1a..12327b2 100644
--- a/lib/Kconfig.debug
+++ b/lib/Kconfig.debug
@@ -359,6 +359,18 @@
In order to access the kmemleak file, debugfs needs to be
mounted (usually at /sys/kernel/debug).
+config DEBUG_KMEMLEAK_EARLY_LOG_SIZE
+ int "Maximum kmemleak early log entries"
+ depends on DEBUG_KMEMLEAK
+ range 200 2000
+ default 400
+ help
+ Kmemleak must track all the memory allocations to avoid
+ reporting false positives. Since memory may be allocated or
+ freed before kmemleak is initialised, an early log buffer is
+ used to store these actions. If kmemleak reports "early log
+ buffer exceeded", please increase this value.
+
config DEBUG_KMEMLEAK_TEST
tristate "Simple test for the kernel memory leak detector"
depends on DEBUG_KMEMLEAK
diff --git a/lib/dma-debug.c b/lib/dma-debug.c
index 3b93129..65b0d99 100644
--- a/lib/dma-debug.c
+++ b/lib/dma-debug.c
@@ -716,7 +716,7 @@
for (i = 0; i < HASH_SIZE; ++i) {
INIT_LIST_HEAD(&dma_entry_hash[i].list);
- dma_entry_hash[i].lock = SPIN_LOCK_UNLOCKED;
+ spin_lock_init(&dma_entry_hash[i].lock);
}
if (dma_debug_fs_init() != 0) {
@@ -856,22 +856,21 @@
"stack [addr=%p]\n", addr);
}
-static inline bool overlap(void *addr, u64 size, void *start, void *end)
+static inline bool overlap(void *addr, unsigned long len, void *start, void *end)
{
- void *addr2 = (char *)addr + size;
+ unsigned long a1 = (unsigned long)addr;
+ unsigned long b1 = a1 + len;
+ unsigned long a2 = (unsigned long)start;
+ unsigned long b2 = (unsigned long)end;
- return ((addr >= start && addr < end) ||
- (addr2 >= start && addr2 < end) ||
- ((addr < start) && (addr2 >= end)));
+ return !(b1 <= a2 || a1 >= b2);
}
-static void check_for_illegal_area(struct device *dev, void *addr, u64 size)
+static void check_for_illegal_area(struct device *dev, void *addr, unsigned long len)
{
- if (overlap(addr, size, _text, _etext) ||
- overlap(addr, size, __start_rodata, __end_rodata))
- err_printk(dev, NULL, "DMA-API: device driver maps "
- "memory from kernel text or rodata "
- "[addr=%p] [size=%llu]\n", addr, size);
+ if (overlap(addr, len, _text, _etext) ||
+ overlap(addr, len, __start_rodata, __end_rodata))
+ err_printk(dev, NULL, "DMA-API: device driver maps memory from kernel text or rodata [addr=%p] [len=%lu]\n", addr, len);
}
static void check_sync(struct device *dev,
@@ -969,7 +968,8 @@
entry->type = dma_debug_single;
if (!PageHighMem(page)) {
- void *addr = ((char *)page_address(page)) + offset;
+ void *addr = page_address(page) + offset;
+
check_for_stack(dev, addr);
check_for_illegal_area(dev, addr, size);
}
diff --git a/mm/backing-dev.c b/mm/backing-dev.c
index 493b468..c86edd2 100644
--- a/mm/backing-dev.c
+++ b/mm/backing-dev.c
@@ -283,7 +283,6 @@
__WAIT_QUEUE_HEAD_INITIALIZER(congestion_wqh[1])
};
-
void clear_bdi_congested(struct backing_dev_info *bdi, int sync)
{
enum bdi_state bit;
@@ -308,18 +307,18 @@
/**
* congestion_wait - wait for a backing_dev to become uncongested
- * @rw: READ or WRITE
+ * @sync: SYNC or ASYNC IO
* @timeout: timeout in jiffies
*
* Waits for up to @timeout jiffies for a backing_dev (any backing_dev) to exit
* write congestion. If no backing_devs are congested then just wait for the
* next write to be completed.
*/
-long congestion_wait(int rw, long timeout)
+long congestion_wait(int sync, long timeout)
{
long ret;
DEFINE_WAIT(wait);
- wait_queue_head_t *wqh = &congestion_wqh[rw];
+ wait_queue_head_t *wqh = &congestion_wqh[sync];
prepare_to_wait(wqh, &wait, TASK_UNINTERRUPTIBLE);
ret = io_schedule_timeout(timeout);
diff --git a/mm/bootmem.c b/mm/bootmem.c
index d2a9ce9..701740c 100644
--- a/mm/bootmem.c
+++ b/mm/bootmem.c
@@ -12,6 +12,7 @@
#include <linux/pfn.h>
#include <linux/bootmem.h>
#include <linux/module.h>
+#include <linux/kmemleak.h>
#include <asm/bug.h>
#include <asm/io.h>
@@ -335,6 +336,8 @@
{
unsigned long start, end;
+ kmemleak_free_part(__va(physaddr), size);
+
start = PFN_UP(physaddr);
end = PFN_DOWN(physaddr + size);
@@ -354,6 +357,8 @@
{
unsigned long start, end;
+ kmemleak_free_part(__va(addr), size);
+
start = PFN_UP(addr);
end = PFN_DOWN(addr + size);
@@ -516,6 +521,7 @@
region = phys_to_virt(PFN_PHYS(bdata->node_min_pfn) +
start_off);
memset(region, 0, size);
+ kmemleak_alloc(region, size, 1, 0);
return region;
}
diff --git a/mm/dmapool.c b/mm/dmapool.c
index b1f0885..3df0637 100644
--- a/mm/dmapool.c
+++ b/mm/dmapool.c
@@ -86,10 +86,12 @@
unsigned pages = 0;
unsigned blocks = 0;
+ spin_lock_irq(&pool->lock);
list_for_each_entry(page, &pool->page_list, page_list) {
pages++;
blocks += page->in_use;
}
+ spin_unlock_irq(&pool->lock);
/* per-pool info, no real statistics yet */
temp = scnprintf(next, size, "%-16s %4u %4Zu %4Zu %2u\n",
diff --git a/mm/filemap.c b/mm/filemap.c
index 2239671..ccea3b6 100644
--- a/mm/filemap.c
+++ b/mm/filemap.c
@@ -2272,6 +2272,7 @@
pagefault_enable();
flush_dcache_page(page);
+ mark_page_accessed(page);
status = a_ops->write_end(file, mapping, pos, bytes, copied,
page, fsdata);
if (unlikely(status < 0))
diff --git a/mm/kmemleak.c b/mm/kmemleak.c
index c96f2c8..5aabd41 100644
--- a/mm/kmemleak.c
+++ b/mm/kmemleak.c
@@ -48,10 +48,10 @@
* scanned. This list is only modified during a scanning episode when the
* scan_mutex is held. At the end of a scan, the gray_list is always empty.
* Note that the kmemleak_object.use_count is incremented when an object is
- * added to the gray_list and therefore cannot be freed
- * - kmemleak_mutex (mutex): prevents multiple users of the "kmemleak" debugfs
- * file together with modifications to the memory scanning parameters
- * including the scan_thread pointer
+ * added to the gray_list and therefore cannot be freed. This mutex also
+ * prevents multiple users of the "kmemleak" debugfs file together with
+ * modifications to the memory scanning parameters including the scan_thread
+ * pointer
*
* The kmemleak_object structures have a use_count incremented or decremented
* using the get_object()/put_object() functions. When the use_count becomes
@@ -103,11 +103,10 @@
* Kmemleak configuration and common defines.
*/
#define MAX_TRACE 16 /* stack trace length */
-#define REPORTS_NR 50 /* maximum number of reported leaks */
#define MSECS_MIN_AGE 5000 /* minimum object age for reporting */
-#define MSECS_SCAN_YIELD 10 /* CPU yielding period */
#define SECS_FIRST_SCAN 60 /* delay before the first scan */
#define SECS_SCAN_WAIT 600 /* subsequent auto scanning delay */
+#define GRAY_LIST_PASSES 25 /* maximum number of gray list scans */
#define BYTES_PER_POINTER sizeof(void *)
@@ -159,6 +158,8 @@
#define OBJECT_REPORTED (1 << 1)
/* flag set to not scan the object */
#define OBJECT_NO_SCAN (1 << 2)
+/* flag set on newly allocated objects */
+#define OBJECT_NEW (1 << 3)
/* the list of all allocated objects */
static LIST_HEAD(object_list);
@@ -186,22 +187,16 @@
static unsigned long min_addr = ULONG_MAX;
static unsigned long max_addr;
-/* used for yielding the CPU to other tasks during scanning */
-static unsigned long next_scan_yield;
static struct task_struct *scan_thread;
-static unsigned long jiffies_scan_yield;
+/* used to avoid reporting of recently allocated objects */
static unsigned long jiffies_min_age;
+static unsigned long jiffies_last_scan;
/* delay between automatic memory scannings */
static signed long jiffies_scan_wait;
/* enables or disables the task stacks scanning */
-static int kmemleak_stack_scan;
-/* mutex protecting the memory scanning */
+static int kmemleak_stack_scan = 1;
+/* protects the memory scanning, parameters and debug/kmemleak file access */
static DEFINE_MUTEX(scan_mutex);
-/* mutex protecting the access to the /sys/kernel/debug/kmemleak file */
-static DEFINE_MUTEX(kmemleak_mutex);
-
-/* number of leaks reported (for limitation purposes) */
-static int reported_leaks;
/*
* Early object allocation/freeing logging. Kmemleak is initialized after the
@@ -215,6 +210,7 @@
enum {
KMEMLEAK_ALLOC,
KMEMLEAK_FREE,
+ KMEMLEAK_FREE_PART,
KMEMLEAK_NOT_LEAK,
KMEMLEAK_IGNORE,
KMEMLEAK_SCAN_AREA,
@@ -235,7 +231,7 @@
};
/* early logging buffer and current position */
-static struct early_log early_log[200];
+static struct early_log early_log[CONFIG_DEBUG_KMEMLEAK_EARLY_LOG_SIZE];
static int crt_early_log;
static void kmemleak_disable(void);
@@ -278,13 +274,9 @@
return object->min_count != -1 && object->count >= object->min_count;
}
-/*
- * Objects are considered referenced if their color is gray and they have not
- * been deleted.
- */
-static int referenced_object(struct kmemleak_object *object)
+static int color_black(const struct kmemleak_object *object)
{
- return (object->flags & OBJECT_ALLOCATED) && color_gray(object);
+ return object->min_count == -1;
}
/*
@@ -295,42 +287,28 @@
static int unreferenced_object(struct kmemleak_object *object)
{
return (object->flags & OBJECT_ALLOCATED) && color_white(object) &&
- time_is_before_eq_jiffies(object->jiffies + jiffies_min_age);
+ time_before_eq(object->jiffies + jiffies_min_age,
+ jiffies_last_scan);
}
/*
- * Printing of the (un)referenced objects information, either to the seq file
- * or to the kernel log. The print_referenced/print_unreferenced functions
- * must be called with the object->lock held.
+ * Printing of the unreferenced objects information to the seq file. The
+ * print_unreferenced function must be called with the object->lock held.
*/
-#define print_helper(seq, x...) do { \
- struct seq_file *s = (seq); \
- if (s) \
- seq_printf(s, x); \
- else \
- pr_info(x); \
-} while (0)
-
-static void print_referenced(struct kmemleak_object *object)
-{
- pr_info("referenced object 0x%08lx (size %zu)\n",
- object->pointer, object->size);
-}
-
static void print_unreferenced(struct seq_file *seq,
struct kmemleak_object *object)
{
int i;
- print_helper(seq, "unreferenced object 0x%08lx (size %zu):\n",
- object->pointer, object->size);
- print_helper(seq, " comm \"%s\", pid %d, jiffies %lu\n",
- object->comm, object->pid, object->jiffies);
- print_helper(seq, " backtrace:\n");
+ seq_printf(seq, "unreferenced object 0x%08lx (size %zu):\n",
+ object->pointer, object->size);
+ seq_printf(seq, " comm \"%s\", pid %d, jiffies %lu\n",
+ object->comm, object->pid, object->jiffies);
+ seq_printf(seq, " backtrace:\n");
for (i = 0; i < object->trace_len; i++) {
void *ptr = (void *)object->trace[i];
- print_helper(seq, " [<%p>] %pS\n", ptr, ptr);
+ seq_printf(seq, " [<%p>] %pS\n", ptr, ptr);
}
}
@@ -478,7 +456,7 @@
INIT_HLIST_HEAD(&object->area_list);
spin_lock_init(&object->lock);
atomic_set(&object->use_count, 1);
- object->flags = OBJECT_ALLOCATED;
+ object->flags = OBJECT_ALLOCATED | OBJECT_NEW;
object->pointer = ptr;
object->size = size;
object->min_count = min_count;
@@ -546,39 +524,87 @@
* Remove the metadata (struct kmemleak_object) for a memory block from the
* object_list and object_tree_root and decrement its use_count.
*/
-static void delete_object(unsigned long ptr)
+static void __delete_object(struct kmemleak_object *object)
{
unsigned long flags;
- struct kmemleak_object *object;
write_lock_irqsave(&kmemleak_lock, flags);
- object = lookup_object(ptr, 0);
- if (!object) {
- kmemleak_warn("Freeing unknown object at 0x%08lx\n",
- ptr);
- write_unlock_irqrestore(&kmemleak_lock, flags);
- return;
- }
prio_tree_remove(&object_tree_root, &object->tree_node);
list_del_rcu(&object->object_list);
write_unlock_irqrestore(&kmemleak_lock, flags);
WARN_ON(!(object->flags & OBJECT_ALLOCATED));
- WARN_ON(atomic_read(&object->use_count) < 1);
+ WARN_ON(atomic_read(&object->use_count) < 2);
/*
* Locking here also ensures that the corresponding memory block
* cannot be freed when it is being scanned.
*/
spin_lock_irqsave(&object->lock, flags);
- if (object->flags & OBJECT_REPORTED)
- print_referenced(object);
object->flags &= ~OBJECT_ALLOCATED;
spin_unlock_irqrestore(&object->lock, flags);
put_object(object);
}
/*
+ * Look up the metadata (struct kmemleak_object) corresponding to ptr and
+ * delete it.
+ */
+static void delete_object_full(unsigned long ptr)
+{
+ struct kmemleak_object *object;
+
+ object = find_and_get_object(ptr, 0);
+ if (!object) {
+#ifdef DEBUG
+ kmemleak_warn("Freeing unknown object at 0x%08lx\n",
+ ptr);
+#endif
+ return;
+ }
+ __delete_object(object);
+ put_object(object);
+}
+
+/*
+ * Look up the metadata (struct kmemleak_object) corresponding to ptr and
+ * delete it. If the memory block is partially freed, the function may create
+ * additional metadata for the remaining parts of the block.
+ */
+static void delete_object_part(unsigned long ptr, size_t size)
+{
+ struct kmemleak_object *object;
+ unsigned long start, end;
+
+ object = find_and_get_object(ptr, 1);
+ if (!object) {
+#ifdef DEBUG
+ kmemleak_warn("Partially freeing unknown object at 0x%08lx "
+ "(size %zu)\n", ptr, size);
+#endif
+ return;
+ }
+ __delete_object(object);
+
+ /*
+ * Create one or two objects that may result from the memory block
+ * split. Note that partial freeing is only done by free_bootmem() and
+ * this happens before kmemleak_init() is called. The path below is
+ * only executed during early log recording in kmemleak_init(), so
+ * GFP_KERNEL is enough.
+ */
+ start = object->pointer;
+ end = object->pointer + object->size;
+ if (ptr > start)
+ create_object(start, ptr - start, object->min_count,
+ GFP_KERNEL);
+ if (ptr + size < end)
+ create_object(ptr + size, end - ptr - size, object->min_count,
+ GFP_KERNEL);
+
+ put_object(object);
+}
+/*
* Make a object permanently as gray-colored so that it can no longer be
* reported as a leak. This is used in general to mark a false positive.
*/
@@ -696,7 +722,8 @@
struct early_log *log;
if (crt_early_log >= ARRAY_SIZE(early_log)) {
- kmemleak_stop("Early log buffer exceeded\n");
+ pr_warning("Early log buffer exceeded\n");
+ kmemleak_disable();
return;
}
@@ -741,13 +768,28 @@
pr_debug("%s(0x%p)\n", __func__, ptr);
if (atomic_read(&kmemleak_enabled) && ptr && !IS_ERR(ptr))
- delete_object((unsigned long)ptr);
+ delete_object_full((unsigned long)ptr);
else if (atomic_read(&kmemleak_early_log))
log_early(KMEMLEAK_FREE, ptr, 0, 0, 0, 0);
}
EXPORT_SYMBOL_GPL(kmemleak_free);
/*
+ * Partial memory freeing function callback. This function is usually called
+ * from bootmem allocator when (part of) a memory block is freed.
+ */
+void kmemleak_free_part(const void *ptr, size_t size)
+{
+ pr_debug("%s(0x%p)\n", __func__, ptr);
+
+ if (atomic_read(&kmemleak_enabled) && ptr && !IS_ERR(ptr))
+ delete_object_part((unsigned long)ptr, size);
+ else if (atomic_read(&kmemleak_early_log))
+ log_early(KMEMLEAK_FREE_PART, ptr, size, 0, 0, 0);
+}
+EXPORT_SYMBOL_GPL(kmemleak_free_part);
+
+/*
* Mark an already allocated memory block as a false positive. This will cause
* the block to no longer be reported as leak and always be scanned.
*/
@@ -808,21 +850,6 @@
EXPORT_SYMBOL(kmemleak_no_scan);
/*
- * Yield the CPU so that other tasks get a chance to run. The yielding is
- * rate-limited to avoid excessive number of calls to the schedule() function
- * during memory scanning.
- */
-static void scan_yield(void)
-{
- might_sleep();
-
- if (time_is_before_eq_jiffies(next_scan_yield)) {
- schedule();
- next_scan_yield = jiffies + jiffies_scan_yield;
- }
-}
-
-/*
* Memory scanning is a long process and it needs to be interruptable. This
* function checks whether such interrupt condition occured.
*/
@@ -848,7 +875,7 @@
* found to the gray list.
*/
static void scan_block(void *_start, void *_end,
- struct kmemleak_object *scanned)
+ struct kmemleak_object *scanned, int allow_resched)
{
unsigned long *ptr;
unsigned long *start = PTR_ALIGN(_start, BYTES_PER_POINTER);
@@ -859,18 +886,11 @@
unsigned long pointer = *ptr;
struct kmemleak_object *object;
+ if (allow_resched)
+ cond_resched();
if (scan_should_stop())
break;
- /*
- * When scanning a memory block with a corresponding
- * kmemleak_object, the CPU yielding is handled in the calling
- * code since it holds the object->lock to avoid the block
- * freeing.
- */
- if (!scanned)
- scan_yield();
-
object = find_and_get_object(pointer, 1);
if (!object)
continue;
@@ -931,12 +951,12 @@
goto out;
if (hlist_empty(&object->area_list))
scan_block((void *)object->pointer,
- (void *)(object->pointer + object->size), object);
+ (void *)(object->pointer + object->size), object, 0);
else
hlist_for_each_entry(area, elem, &object->area_list, node)
scan_block((void *)(object->pointer + area->offset),
(void *)(object->pointer + area->offset
- + area->length), object);
+ + area->length), object, 0);
out:
spin_unlock_irqrestore(&object->lock, flags);
}
@@ -952,6 +972,10 @@
struct kmemleak_object *object, *tmp;
struct task_struct *task;
int i;
+ int new_leaks = 0;
+ int gray_list_pass = 0;
+
+ jiffies_last_scan = jiffies;
/* prepare the kmemleak_object's */
rcu_read_lock();
@@ -970,6 +994,7 @@
#endif
/* reset the reference count (whiten the object) */
object->count = 0;
+ object->flags &= ~OBJECT_NEW;
if (color_gray(object) && get_object(object))
list_add_tail(&object->gray_list, &gray_list);
@@ -978,14 +1003,14 @@
rcu_read_unlock();
/* data/bss scanning */
- scan_block(_sdata, _edata, NULL);
- scan_block(__bss_start, __bss_stop, NULL);
+ scan_block(_sdata, _edata, NULL, 1);
+ scan_block(__bss_start, __bss_stop, NULL, 1);
#ifdef CONFIG_SMP
/* per-cpu sections scanning */
for_each_possible_cpu(i)
scan_block(__per_cpu_start + per_cpu_offset(i),
- __per_cpu_end + per_cpu_offset(i), NULL);
+ __per_cpu_end + per_cpu_offset(i), NULL, 1);
#endif
/*
@@ -1007,7 +1032,7 @@
/* only scan if page is in use */
if (page_count(page) == 0)
continue;
- scan_block(page, page + 1, NULL);
+ scan_block(page, page + 1, NULL, 1);
}
}
@@ -1019,7 +1044,8 @@
read_lock(&tasklist_lock);
for_each_process(task)
scan_block(task_stack_page(task),
- task_stack_page(task) + THREAD_SIZE, NULL);
+ task_stack_page(task) + THREAD_SIZE,
+ NULL, 0);
read_unlock(&tasklist_lock);
}
@@ -1031,9 +1057,10 @@
* kmemleak objects cannot be freed from outside the loop because their
* use_count was increased.
*/
+repeat:
object = list_entry(gray_list.next, typeof(*object), gray_list);
while (&object->gray_list != &gray_list) {
- scan_yield();
+ cond_resched();
/* may add new objects to the list */
if (!scan_should_stop())
@@ -1048,7 +1075,59 @@
object = tmp;
}
+
+ if (scan_should_stop() || ++gray_list_pass >= GRAY_LIST_PASSES)
+ goto scan_end;
+
+ /*
+ * Check for new objects allocated during this scanning and add them
+ * to the gray list.
+ */
+ rcu_read_lock();
+ list_for_each_entry_rcu(object, &object_list, object_list) {
+ spin_lock_irqsave(&object->lock, flags);
+ if ((object->flags & OBJECT_NEW) && !color_black(object) &&
+ get_object(object)) {
+ object->flags &= ~OBJECT_NEW;
+ list_add_tail(&object->gray_list, &gray_list);
+ }
+ spin_unlock_irqrestore(&object->lock, flags);
+ }
+ rcu_read_unlock();
+
+ if (!list_empty(&gray_list))
+ goto repeat;
+
+scan_end:
WARN_ON(!list_empty(&gray_list));
+
+ /*
+ * If scanning was stopped or new objects were being allocated at a
+ * higher rate than gray list scanning, do not report any new
+ * unreferenced objects.
+ */
+ if (scan_should_stop() || gray_list_pass >= GRAY_LIST_PASSES)
+ return;
+
+ /*
+ * Scanning result reporting.
+ */
+ rcu_read_lock();
+ list_for_each_entry_rcu(object, &object_list, object_list) {
+ spin_lock_irqsave(&object->lock, flags);
+ if (unreferenced_object(object) &&
+ !(object->flags & OBJECT_REPORTED)) {
+ object->flags |= OBJECT_REPORTED;
+ new_leaks++;
+ }
+ spin_unlock_irqrestore(&object->lock, flags);
+ }
+ rcu_read_unlock();
+
+ if (new_leaks)
+ pr_info("%d new suspected memory leaks (see "
+ "/sys/kernel/debug/kmemleak)\n", new_leaks);
+
}
/*
@@ -1060,6 +1139,7 @@
static int first_run = 1;
pr_info("Automatic memory scanning thread started\n");
+ set_user_nice(current, 10);
/*
* Wait before the first scan to allow the system to fully initialize.
@@ -1070,36 +1150,12 @@
}
while (!kthread_should_stop()) {
- struct kmemleak_object *object;
signed long timeout = jiffies_scan_wait;
mutex_lock(&scan_mutex);
-
kmemleak_scan();
- reported_leaks = 0;
-
- rcu_read_lock();
- list_for_each_entry_rcu(object, &object_list, object_list) {
- unsigned long flags;
-
- if (reported_leaks >= REPORTS_NR)
- break;
- spin_lock_irqsave(&object->lock, flags);
- if (!(object->flags & OBJECT_REPORTED) &&
- unreferenced_object(object)) {
- print_unreferenced(NULL, object);
- object->flags |= OBJECT_REPORTED;
- reported_leaks++;
- } else if ((object->flags & OBJECT_REPORTED) &&
- referenced_object(object)) {
- print_referenced(object);
- object->flags &= ~OBJECT_REPORTED;
- }
- spin_unlock_irqrestore(&object->lock, flags);
- }
- rcu_read_unlock();
-
mutex_unlock(&scan_mutex);
+
/* wait before the next scan */
while (timeout && !kthread_should_stop())
timeout = schedule_timeout_interruptible(timeout);
@@ -1112,7 +1168,7 @@
/*
* Start the automatic memory scanning thread. This function must be called
- * with the kmemleak_mutex held.
+ * with the scan_mutex held.
*/
void start_scan_thread(void)
{
@@ -1127,7 +1183,7 @@
/*
* Stop the automatic memory scanning thread. This function must be called
- * with the kmemleak_mutex held.
+ * with the scan_mutex held.
*/
void stop_scan_thread(void)
{
@@ -1146,13 +1202,11 @@
{
struct kmemleak_object *object;
loff_t n = *pos;
+ int err;
- if (!n) {
- kmemleak_scan();
- reported_leaks = 0;
- }
- if (reported_leaks >= REPORTS_NR)
- return NULL;
+ err = mutex_lock_interruptible(&scan_mutex);
+ if (err < 0)
+ return ERR_PTR(err);
rcu_read_lock();
list_for_each_entry_rcu(object, &object_list, object_list) {
@@ -1178,8 +1232,6 @@
struct list_head *n = &prev_obj->object_list;
++(*pos);
- if (reported_leaks >= REPORTS_NR)
- goto out;
rcu_read_lock();
list_for_each_continue_rcu(n, &object_list) {
@@ -1188,7 +1240,7 @@
break;
}
rcu_read_unlock();
-out:
+
put_object(prev_obj);
return next_obj;
}
@@ -1198,8 +1250,15 @@
*/
static void kmemleak_seq_stop(struct seq_file *seq, void *v)
{
- if (v)
- put_object(v);
+ if (!IS_ERR(v)) {
+ /*
+ * kmemleak_seq_start may return ERR_PTR if the scan_mutex
+ * waiting was interrupted, so only release it if !IS_ERR.
+ */
+ mutex_unlock(&scan_mutex);
+ if (v)
+ put_object(v);
+ }
}
/*
@@ -1211,11 +1270,8 @@
unsigned long flags;
spin_lock_irqsave(&object->lock, flags);
- if (!unreferenced_object(object))
- goto out;
- print_unreferenced(seq, object);
- reported_leaks++;
-out:
+ if ((object->flags & OBJECT_REPORTED) && unreferenced_object(object))
+ print_unreferenced(seq, object);
spin_unlock_irqrestore(&object->lock, flags);
return 0;
}
@@ -1229,43 +1285,15 @@
static int kmemleak_open(struct inode *inode, struct file *file)
{
- int ret = 0;
-
if (!atomic_read(&kmemleak_enabled))
return -EBUSY;
- ret = mutex_lock_interruptible(&kmemleak_mutex);
- if (ret < 0)
- goto out;
- if (file->f_mode & FMODE_READ) {
- ret = mutex_lock_interruptible(&scan_mutex);
- if (ret < 0)
- goto kmemleak_unlock;
- ret = seq_open(file, &kmemleak_seq_ops);
- if (ret < 0)
- goto scan_unlock;
- }
- return ret;
-
-scan_unlock:
- mutex_unlock(&scan_mutex);
-kmemleak_unlock:
- mutex_unlock(&kmemleak_mutex);
-out:
- return ret;
+ return seq_open(file, &kmemleak_seq_ops);
}
static int kmemleak_release(struct inode *inode, struct file *file)
{
- int ret = 0;
-
- if (file->f_mode & FMODE_READ) {
- seq_release(inode, file);
- mutex_unlock(&scan_mutex);
- }
- mutex_unlock(&kmemleak_mutex);
-
- return ret;
+ return seq_release(inode, file);
}
/*
@@ -1278,21 +1306,24 @@
* scan=off - stop the automatic memory scanning thread
* scan=... - set the automatic memory scanning period in seconds (0 to
* disable it)
+ * scan - trigger a memory scan
*/
static ssize_t kmemleak_write(struct file *file, const char __user *user_buf,
size_t size, loff_t *ppos)
{
char buf[64];
int buf_size;
-
- if (!atomic_read(&kmemleak_enabled))
- return -EBUSY;
+ int ret;
buf_size = min(size, (sizeof(buf) - 1));
if (strncpy_from_user(buf, user_buf, buf_size) < 0)
return -EFAULT;
buf[buf_size] = 0;
+ ret = mutex_lock_interruptible(&scan_mutex);
+ if (ret < 0)
+ return ret;
+
if (strncmp(buf, "off", 3) == 0)
kmemleak_disable();
else if (strncmp(buf, "stack=on", 8) == 0)
@@ -1305,18 +1336,24 @@
stop_scan_thread();
else if (strncmp(buf, "scan=", 5) == 0) {
unsigned long secs;
- int err;
- err = strict_strtoul(buf + 5, 0, &secs);
- if (err < 0)
- return err;
+ ret = strict_strtoul(buf + 5, 0, &secs);
+ if (ret < 0)
+ goto out;
stop_scan_thread();
if (secs) {
jiffies_scan_wait = msecs_to_jiffies(secs * 1000);
start_scan_thread();
}
- } else
- return -EINVAL;
+ } else if (strncmp(buf, "scan", 4) == 0)
+ kmemleak_scan();
+ else
+ ret = -EINVAL;
+
+out:
+ mutex_unlock(&scan_mutex);
+ if (ret < 0)
+ return ret;
/* ignore the rest of the buffer, only one command at a time */
*ppos += size;
@@ -1340,14 +1377,12 @@
{
struct kmemleak_object *object;
- mutex_lock(&kmemleak_mutex);
- stop_scan_thread();
- mutex_unlock(&kmemleak_mutex);
-
mutex_lock(&scan_mutex);
+ stop_scan_thread();
+
rcu_read_lock();
list_for_each_entry_rcu(object, &object_list, object_list)
- delete_object(object->pointer);
+ delete_object_full(object->pointer);
rcu_read_unlock();
mutex_unlock(&scan_mutex);
@@ -1411,7 +1446,6 @@
int i;
unsigned long flags;
- jiffies_scan_yield = msecs_to_jiffies(MSECS_SCAN_YIELD);
jiffies_min_age = msecs_to_jiffies(MSECS_MIN_AGE);
jiffies_scan_wait = msecs_to_jiffies(SECS_SCAN_WAIT * 1000);
@@ -1443,6 +1477,9 @@
case KMEMLEAK_FREE:
kmemleak_free(log->ptr);
break;
+ case KMEMLEAK_FREE_PART:
+ kmemleak_free_part(log->ptr, log->size);
+ break;
case KMEMLEAK_NOT_LEAK:
kmemleak_not_leak(log->ptr);
break;
@@ -1486,9 +1523,9 @@
&kmemleak_fops);
if (!dentry)
pr_warning("Failed to create the debugfs kmemleak file\n");
- mutex_lock(&kmemleak_mutex);
+ mutex_lock(&scan_mutex);
start_scan_thread();
- mutex_unlock(&kmemleak_mutex);
+ mutex_unlock(&scan_mutex);
pr_info("Kernel memory leak detector initialized\n");
diff --git a/mm/memcontrol.c b/mm/memcontrol.c
index e2fa20d..e717964 100644
--- a/mm/memcontrol.c
+++ b/mm/memcontrol.c
@@ -1973,7 +1973,7 @@
if (!progress) {
nr_retries--;
/* maybe some writeback is necessary */
- congestion_wait(WRITE, HZ/10);
+ congestion_wait(BLK_RW_ASYNC, HZ/10);
}
}
diff --git a/mm/memory.c b/mm/memory.c
index f46ac18..6521619 100644
--- a/mm/memory.c
+++ b/mm/memory.c
@@ -1207,8 +1207,8 @@
int __get_user_pages(struct task_struct *tsk, struct mm_struct *mm,
- unsigned long start, int len, int flags,
- struct page **pages, struct vm_area_struct **vmas)
+ unsigned long start, int nr_pages, int flags,
+ struct page **pages, struct vm_area_struct **vmas)
{
int i;
unsigned int vm_flags = 0;
@@ -1217,7 +1217,7 @@
int ignore = !!(flags & GUP_FLAGS_IGNORE_VMA_PERMISSIONS);
int ignore_sigkill = !!(flags & GUP_FLAGS_IGNORE_SIGKILL);
- if (len <= 0)
+ if (nr_pages <= 0)
return 0;
/*
* Require read or write permissions.
@@ -1269,7 +1269,7 @@
vmas[i] = gate_vma;
i++;
start += PAGE_SIZE;
- len--;
+ nr_pages--;
continue;
}
@@ -1280,7 +1280,7 @@
if (is_vm_hugetlb_page(vma)) {
i = follow_hugetlb_page(mm, vma, pages, vmas,
- &start, &len, i, write);
+ &start, &nr_pages, i, write);
continue;
}
@@ -1357,9 +1357,9 @@
vmas[i] = vma;
i++;
start += PAGE_SIZE;
- len--;
- } while (len && start < vma->vm_end);
- } while (len);
+ nr_pages--;
+ } while (nr_pages && start < vma->vm_end);
+ } while (nr_pages);
return i;
}
@@ -1368,7 +1368,7 @@
* @tsk: task_struct of target task
* @mm: mm_struct of target mm
* @start: starting user address
- * @len: number of pages from start to pin
+ * @nr_pages: number of pages from start to pin
* @write: whether pages will be written to by the caller
* @force: whether to force write access even if user mapping is
* readonly. This will result in the page being COWed even
@@ -1380,7 +1380,7 @@
* Or NULL if the caller does not require them.
*
* Returns number of pages pinned. This may be fewer than the number
- * requested. If len is 0 or negative, returns 0. If no pages
+ * requested. If nr_pages is 0 or negative, returns 0. If no pages
* were pinned, returns -errno. Each page returned must be released
* with a put_page() call when it is finished with. vmas will only
* remain valid while mmap_sem is held.
@@ -1414,7 +1414,7 @@
* See also get_user_pages_fast, for performance critical applications.
*/
int get_user_pages(struct task_struct *tsk, struct mm_struct *mm,
- unsigned long start, int len, int write, int force,
+ unsigned long start, int nr_pages, int write, int force,
struct page **pages, struct vm_area_struct **vmas)
{
int flags = 0;
@@ -1424,9 +1424,7 @@
if (force)
flags |= GUP_FLAGS_FORCE;
- return __get_user_pages(tsk, mm,
- start, len, flags,
- pages, vmas);
+ return __get_user_pages(tsk, mm, start, nr_pages, flags, pages, vmas);
}
EXPORT_SYMBOL(get_user_pages);
diff --git a/mm/nommu.c b/mm/nommu.c
index 2fd2ad5..53cab10 100644
--- a/mm/nommu.c
+++ b/mm/nommu.c
@@ -173,8 +173,8 @@
}
int __get_user_pages(struct task_struct *tsk, struct mm_struct *mm,
- unsigned long start, int len, int flags,
- struct page **pages, struct vm_area_struct **vmas)
+ unsigned long start, int nr_pages, int flags,
+ struct page **pages, struct vm_area_struct **vmas)
{
struct vm_area_struct *vma;
unsigned long vm_flags;
@@ -189,7 +189,7 @@
vm_flags = write ? (VM_WRITE | VM_MAYWRITE) : (VM_READ | VM_MAYREAD);
vm_flags &= force ? (VM_MAYREAD | VM_MAYWRITE) : (VM_READ | VM_WRITE);
- for (i = 0; i < len; i++) {
+ for (i = 0; i < nr_pages; i++) {
vma = find_vma(mm, start);
if (!vma)
goto finish_or_fault;
@@ -224,7 +224,7 @@
* - don't permit access to VMAs that don't support it, such as I/O mappings
*/
int get_user_pages(struct task_struct *tsk, struct mm_struct *mm,
- unsigned long start, int len, int write, int force,
+ unsigned long start, int nr_pages, int write, int force,
struct page **pages, struct vm_area_struct **vmas)
{
int flags = 0;
@@ -234,12 +234,31 @@
if (force)
flags |= GUP_FLAGS_FORCE;
- return __get_user_pages(tsk, mm,
- start, len, flags,
- pages, vmas);
+ return __get_user_pages(tsk, mm, start, nr_pages, flags, pages, vmas);
}
EXPORT_SYMBOL(get_user_pages);
+/**
+ * follow_pfn - look up PFN at a user virtual address
+ * @vma: memory mapping
+ * @address: user virtual address
+ * @pfn: location to store found PFN
+ *
+ * Only IO mappings and raw PFN mappings are allowed.
+ *
+ * Returns zero and the pfn at @pfn on success, -ve otherwise.
+ */
+int follow_pfn(struct vm_area_struct *vma, unsigned long address,
+ unsigned long *pfn)
+{
+ if (!(vma->vm_flags & (VM_IO | VM_PFNMAP)))
+ return -EINVAL;
+
+ *pfn = address >> PAGE_SHIFT;
+ return 0;
+}
+EXPORT_SYMBOL(follow_pfn);
+
DEFINE_RWLOCK(vmlist_lock);
struct vm_struct *vmlist;
diff --git a/mm/page-writeback.c b/mm/page-writeback.c
index 7b0dcea..81627eb 100644
--- a/mm/page-writeback.c
+++ b/mm/page-writeback.c
@@ -541,8 +541,11 @@
* filesystems (i.e. NFS) in which data may have been
* written to the server's write cache, but has not yet
* been flushed to permanent storage.
+ * Only move pages to writeback if this bdi is over its
+ * threshold otherwise wait until the disk writes catch
+ * up.
*/
- if (bdi_nr_reclaimable) {
+ if (bdi_nr_reclaimable > bdi_thresh) {
writeback_inodes(&wbc);
pages_written += write_chunk - wbc.nr_to_write;
get_dirty_limits(&background_thresh, &dirty_thresh,
@@ -572,7 +575,7 @@
if (pages_written >= write_chunk)
break; /* We've done our duty */
- congestion_wait(WRITE, HZ/10);
+ congestion_wait(BLK_RW_ASYNC, HZ/10);
}
if (bdi_nr_reclaimable + bdi_nr_writeback < bdi_thresh &&
@@ -666,7 +669,7 @@
if (global_page_state(NR_UNSTABLE_NFS) +
global_page_state(NR_WRITEBACK) <= dirty_thresh)
break;
- congestion_wait(WRITE, HZ/10);
+ congestion_wait(BLK_RW_ASYNC, HZ/10);
/*
* The caller might hold locks which can prevent IO completion
@@ -712,7 +715,7 @@
if (wbc.nr_to_write > 0 || wbc.pages_skipped > 0) {
/* Wrote less than expected */
if (wbc.encountered_congestion || wbc.more_io)
- congestion_wait(WRITE, HZ/10);
+ congestion_wait(BLK_RW_ASYNC, HZ/10);
else
break;
}
@@ -784,7 +787,7 @@
writeback_inodes(&wbc);
if (wbc.nr_to_write > 0) {
if (wbc.encountered_congestion || wbc.more_io)
- congestion_wait(WRITE, HZ/10);
+ congestion_wait(BLK_RW_ASYNC, HZ/10);
else
break; /* All the old data is written */
}
diff --git a/mm/page_alloc.c b/mm/page_alloc.c
index 5d714f8..caa9268 100644
--- a/mm/page_alloc.c
+++ b/mm/page_alloc.c
@@ -1666,7 +1666,7 @@
preferred_zone, migratetype);
if (!page && gfp_mask & __GFP_NOFAIL)
- congestion_wait(WRITE, HZ/50);
+ congestion_wait(BLK_RW_ASYNC, HZ/50);
} while (!page && (gfp_mask & __GFP_NOFAIL));
return page;
@@ -1831,7 +1831,7 @@
pages_reclaimed += did_some_progress;
if (should_alloc_retry(gfp_mask, order, pages_reclaimed)) {
/* Wait for some write requests to complete then retry */
- congestion_wait(WRITE, HZ/50);
+ congestion_wait(BLK_RW_ASYNC, HZ/50);
goto rebalance;
}
@@ -1983,7 +1983,7 @@
unsigned long alloc_end = addr + (PAGE_SIZE << order);
unsigned long used = addr + PAGE_ALIGN(size);
- split_page(virt_to_page(addr), order);
+ split_page(virt_to_page((void *)addr), order);
while (used < alloc_end) {
free_page(used);
used += PAGE_SIZE;
@@ -4032,6 +4032,8 @@
int i, nid;
unsigned long usable_startpfn;
unsigned long kernelcore_node, kernelcore_remaining;
+ /* save the state before borrow the nodemask */
+ nodemask_t saved_node_state = node_states[N_HIGH_MEMORY];
unsigned long totalpages = early_calculate_totalpages();
int usable_nodes = nodes_weight(node_states[N_HIGH_MEMORY]);
@@ -4059,7 +4061,7 @@
/* If kernelcore was not specified, there is no ZONE_MOVABLE */
if (!required_kernelcore)
- return;
+ goto out;
/* usable_startpfn is the lowest possible pfn ZONE_MOVABLE can be at */
find_usable_zone_for_movable();
@@ -4158,6 +4160,10 @@
for (nid = 0; nid < MAX_NUMNODES; nid++)
zone_movable_pfn[nid] =
roundup(zone_movable_pfn[nid], MAX_ORDER_NR_PAGES);
+
+out:
+ /* restore the node_state */
+ node_states[N_HIGH_MEMORY] = saved_node_state;
}
/* Any regular memory on that node ? */
@@ -4242,11 +4248,6 @@
early_node_map[i].start_pfn,
early_node_map[i].end_pfn);
- /*
- * find_zone_movable_pfns_for_nodes/early_calculate_totalpages init
- * that node_mask, clear it at first
- */
- nodes_clear(node_states[N_HIGH_MEMORY]);
/* Initialise every node */
mminit_verify_pageflags_layout();
setup_nr_node_ids();
@@ -4744,8 +4745,10 @@
* some pages at the end of hash table which
* alloc_pages_exact() automatically does
*/
- if (get_order(size) < MAX_ORDER)
+ if (get_order(size) < MAX_ORDER) {
table = alloc_pages_exact(size, GFP_ATOMIC);
+ kmemleak_alloc(table, size, 1, GFP_ATOMIC);
+ }
}
} while (!table && size > PAGE_SIZE && --log2qty);
@@ -4763,16 +4766,6 @@
if (_hash_mask)
*_hash_mask = (1 << log2qty) - 1;
- /*
- * If hashdist is set, the table allocation is done with __vmalloc()
- * which invokes the kmemleak_alloc() callback. This function may also
- * be called before the slab and kmemleak are initialised when
- * kmemleak simply buffers the request to be executed later
- * (GFP_ATOMIC flag ignored in this case).
- */
- if (!hashdist)
- kmemleak_alloc(table, size, 1, GFP_ATOMIC);
-
return table;
}
diff --git a/mm/percpu.c b/mm/percpu.c
index c0b2c1a..b70f2ac 100644
--- a/mm/percpu.c
+++ b/mm/percpu.c
@@ -549,14 +549,14 @@
* @chunk: chunk of interest
* @page_start: page index of the first page to unmap
* @page_end: page index of the last page to unmap + 1
- * @flush: whether to flush cache and tlb or not
+ * @flush_tlb: whether to flush tlb or not
*
* For each cpu, unmap pages [@page_start,@page_end) out of @chunk.
* If @flush is true, vcache is flushed before unmapping and tlb
* after.
*/
static void pcpu_unmap(struct pcpu_chunk *chunk, int page_start, int page_end,
- bool flush)
+ bool flush_tlb)
{
unsigned int last = num_possible_cpus() - 1;
unsigned int cpu;
@@ -569,9 +569,8 @@
* the whole region at once rather than doing it for each cpu.
* This could be an overkill but is more scalable.
*/
- if (flush)
- flush_cache_vunmap(pcpu_chunk_addr(chunk, 0, page_start),
- pcpu_chunk_addr(chunk, last, page_end));
+ flush_cache_vunmap(pcpu_chunk_addr(chunk, 0, page_start),
+ pcpu_chunk_addr(chunk, last, page_end));
for_each_possible_cpu(cpu)
unmap_kernel_range_noflush(
@@ -579,7 +578,7 @@
(page_end - page_start) << PAGE_SHIFT);
/* ditto as flush_cache_vunmap() */
- if (flush)
+ if (flush_tlb)
flush_tlb_kernel_range(pcpu_chunk_addr(chunk, 0, page_start),
pcpu_chunk_addr(chunk, last, page_end));
}
@@ -1234,6 +1233,7 @@
ssize_t __init pcpu_embed_first_chunk(size_t static_size, size_t reserved_size,
ssize_t dyn_size, ssize_t unit_size)
{
+ size_t chunk_size;
unsigned int cpu;
/* determine parameters and allocate */
@@ -1248,11 +1248,15 @@
} else
pcpue_unit_size = max_t(size_t, pcpue_size, PCPU_MIN_UNIT_SIZE);
- pcpue_ptr = __alloc_bootmem_nopanic(
- num_possible_cpus() * pcpue_unit_size,
- PAGE_SIZE, __pa(MAX_DMA_ADDRESS));
- if (!pcpue_ptr)
+ chunk_size = pcpue_unit_size * num_possible_cpus();
+
+ pcpue_ptr = __alloc_bootmem_nopanic(chunk_size, PAGE_SIZE,
+ __pa(MAX_DMA_ADDRESS));
+ if (!pcpue_ptr) {
+ pr_warning("PERCPU: failed to allocate %zu bytes for "
+ "embedding\n", chunk_size);
return -ENOMEM;
+ }
/* return the leftover and copy */
for_each_possible_cpu(cpu) {
diff --git a/mm/slab.c b/mm/slab.c
index e74a16e..7b5d4de 100644
--- a/mm/slab.c
+++ b/mm/slab.c
@@ -1544,9 +1544,6 @@
}
g_cpucache_up = EARLY;
-
- /* Annotate slab for lockdep -- annotate the malloc caches */
- init_lock_keys();
}
void __init kmem_cache_init_late(void)
@@ -1563,6 +1560,9 @@
/* Done! */
g_cpucache_up = FULL;
+ /* Annotate slab for lockdep -- annotate the malloc caches */
+ init_lock_keys();
+
/*
* Register a cpu startup notifier callback that initializes
* cpu_cache_get for all new cpus
@@ -2547,7 +2547,7 @@
}
if (unlikely(cachep->flags & SLAB_DESTROY_BY_RCU))
- synchronize_rcu();
+ rcu_barrier();
__kmem_cache_destroy(cachep);
mutex_unlock(&cache_chain_mutex);
diff --git a/mm/slob.c b/mm/slob.c
index c78742d..9641da3 100644
--- a/mm/slob.c
+++ b/mm/slob.c
@@ -595,6 +595,8 @@
void kmem_cache_destroy(struct kmem_cache *c)
{
kmemleak_free(c);
+ if (c->flags & SLAB_DESTROY_BY_RCU)
+ rcu_barrier();
slob_free(c, sizeof(struct kmem_cache));
}
EXPORT_SYMBOL(kmem_cache_destroy);
diff --git a/mm/slub.c b/mm/slub.c
index 819f056..b9f1491 100644
--- a/mm/slub.c
+++ b/mm/slub.c
@@ -21,7 +21,6 @@
#include <linux/kmemcheck.h>
#include <linux/cpu.h>
#include <linux/cpuset.h>
-#include <linux/kmemleak.h>
#include <linux/mempolicy.h>
#include <linux/ctype.h>
#include <linux/debugobjects.h>
@@ -2595,6 +2594,8 @@
*/
void kmem_cache_destroy(struct kmem_cache *s)
{
+ if (s->flags & SLAB_DESTROY_BY_RCU)
+ rcu_barrier();
down_write(&slub_lock);
s->refcount--;
if (!s->refcount) {
@@ -2833,13 +2834,15 @@
static void *kmalloc_large_node(size_t size, gfp_t flags, int node)
{
struct page *page;
+ void *ptr = NULL;
flags |= __GFP_COMP | __GFP_NOTRACK;
page = alloc_pages_node(node, flags, get_order(size));
if (page)
- return page_address(page);
- else
- return NULL;
+ ptr = page_address(page);
+
+ kmemleak_alloc(ptr, size, 1, flags);
+ return ptr;
}
#ifdef CONFIG_NUMA
@@ -2924,6 +2927,7 @@
page = virt_to_head_page(x);
if (unlikely(!PageSlab(page))) {
BUG_ON(!PageCompound(page));
+ kmemleak_free(x);
put_page(page);
return;
}
diff --git a/mm/vmscan.c b/mm/vmscan.c
index 5415526..dea7abd 100644
--- a/mm/vmscan.c
+++ b/mm/vmscan.c
@@ -1104,7 +1104,7 @@
*/
if (nr_freed < nr_taken && !current_is_kswapd() &&
lumpy_reclaim) {
- congestion_wait(WRITE, HZ/10);
+ congestion_wait(BLK_RW_ASYNC, HZ/10);
/*
* The attempt at page out may have made some
@@ -1721,7 +1721,7 @@
/* Take a nap, wait for some writeback to complete */
if (sc->nr_scanned && priority < DEF_PRIORITY - 2)
- congestion_wait(WRITE, HZ/10);
+ congestion_wait(BLK_RW_ASYNC, HZ/10);
}
/* top priority shrink_zones still had more to do? don't OOM, then */
if (!sc->all_unreclaimable && scanning_global_lru(sc))
@@ -1960,7 +1960,7 @@
* another pass across the zones.
*/
if (total_scanned && priority < DEF_PRIORITY - 2)
- congestion_wait(WRITE, HZ/10);
+ congestion_wait(BLK_RW_ASYNC, HZ/10);
/*
* We do this so kswapd doesn't build up large priorities for
@@ -2233,7 +2233,7 @@
goto out;
if (sc.nr_scanned && prio < DEF_PRIORITY - 2)
- congestion_wait(WRITE, HZ / 10);
+ congestion_wait(BLK_RW_ASYNC, HZ / 10);
}
}
diff --git a/net/9p/trans_fd.c b/net/9p/trans_fd.c
index a2a1814..8c2588e 100644
--- a/net/9p/trans_fd.c
+++ b/net/9p/trans_fd.c
@@ -735,12 +735,14 @@
if (!*p)
continue;
token = match_token(p, tokens, args);
- r = match_int(&args[0], &option);
- if (r < 0) {
- P9_DPRINTK(P9_DEBUG_ERROR,
- "integer field, but no integer?\n");
- ret = r;
- continue;
+ if (token != Opt_err) {
+ r = match_int(&args[0], &option);
+ if (r < 0) {
+ P9_DPRINTK(P9_DEBUG_ERROR,
+ "integer field, but no integer?\n");
+ ret = r;
+ continue;
+ }
}
switch (token) {
case Opt_port:
diff --git a/net/appletalk/ddp.c b/net/appletalk/ddp.c
index 590b839..bfbe137 100644
--- a/net/appletalk/ddp.c
+++ b/net/appletalk/ddp.c
@@ -54,6 +54,7 @@
#include <linux/capability.h>
#include <linux/module.h>
#include <linux/if_arp.h>
+#include <linux/smp_lock.h>
#include <linux/termios.h> /* For TIOCOUTQ/INQ */
#include <net/datalink.h>
#include <net/psnap.h>
diff --git a/net/atm/common.c b/net/atm/common.c
index c1c9793..8c4d843 100644
--- a/net/atm/common.c
+++ b/net/atm/common.c
@@ -92,7 +92,7 @@
static void vcc_def_wakeup(struct sock *sk)
{
read_lock(&sk->sk_callback_lock);
- if (sk->sk_sleep && waitqueue_active(sk->sk_sleep))
+ if (sk_has_sleeper(sk))
wake_up(sk->sk_sleep);
read_unlock(&sk->sk_callback_lock);
}
@@ -110,7 +110,7 @@
read_lock(&sk->sk_callback_lock);
if (vcc_writable(sk)) {
- if (sk->sk_sleep && waitqueue_active(sk->sk_sleep))
+ if (sk_has_sleeper(sk))
wake_up_interruptible(sk->sk_sleep);
sk_wake_async(sk, SOCK_WAKE_SPACE, POLL_OUT);
@@ -594,7 +594,7 @@
struct atm_vcc *vcc;
unsigned int mask;
- poll_wait(file, sk->sk_sleep, wait);
+ sock_poll_wait(file, sk->sk_sleep, wait);
mask = 0;
vcc = ATM_SD(sock);
diff --git a/net/bridge/br.c b/net/bridge/br.c
index 9aac521..e1241c7 100644
--- a/net/bridge/br.c
+++ b/net/bridge/br.c
@@ -93,7 +93,7 @@
unregister_pernet_subsys(&br_net_ops);
- synchronize_net();
+ rcu_barrier(); /* Wait for completion of call_rcu()'s */
br_netfilter_fini();
#if defined(CONFIG_ATM_LANE) || defined(CONFIG_ATM_LANE_MODULE)
diff --git a/net/core/datagram.c b/net/core/datagram.c
index 58abee1..b0fe692 100644
--- a/net/core/datagram.c
+++ b/net/core/datagram.c
@@ -712,7 +712,7 @@
struct sock *sk = sock->sk;
unsigned int mask;
- poll_wait(file, sk->sk_sleep, wait);
+ sock_poll_wait(file, sk->sk_sleep, wait);
mask = 0;
/* exceptional events? */
diff --git a/net/core/dev.c b/net/core/dev.c
index 60b5728..70c27e0 100644
--- a/net/core/dev.c
+++ b/net/core/dev.c
@@ -2823,9 +2823,11 @@
* move the instance around on the list at-will.
*/
if (unlikely(work == weight)) {
- if (unlikely(napi_disable_pending(n)))
- __napi_complete(n);
- else
+ if (unlikely(napi_disable_pending(n))) {
+ local_irq_enable();
+ napi_complete(n);
+ local_irq_disable();
+ } else
list_move_tail(&n->poll_list, list);
}
diff --git a/net/core/netpoll.c b/net/core/netpoll.c
index 9675f31..df30feb 100644
--- a/net/core/netpoll.c
+++ b/net/core/netpoll.c
@@ -740,7 +740,7 @@
np->name);
break;
}
- cond_resched();
+ msleep(1);
}
/* If carrier appears to come up instantly, we don't
diff --git a/net/core/sock.c b/net/core/sock.c
index b0ba569..6354863 100644
--- a/net/core/sock.c
+++ b/net/core/sock.c
@@ -1715,7 +1715,7 @@
static void sock_def_wakeup(struct sock *sk)
{
read_lock(&sk->sk_callback_lock);
- if (sk->sk_sleep && waitqueue_active(sk->sk_sleep))
+ if (sk_has_sleeper(sk))
wake_up_interruptible_all(sk->sk_sleep);
read_unlock(&sk->sk_callback_lock);
}
@@ -1723,7 +1723,7 @@
static void sock_def_error_report(struct sock *sk)
{
read_lock(&sk->sk_callback_lock);
- if (sk->sk_sleep && waitqueue_active(sk->sk_sleep))
+ if (sk_has_sleeper(sk))
wake_up_interruptible_poll(sk->sk_sleep, POLLERR);
sk_wake_async(sk, SOCK_WAKE_IO, POLL_ERR);
read_unlock(&sk->sk_callback_lock);
@@ -1732,7 +1732,7 @@
static void sock_def_readable(struct sock *sk, int len)
{
read_lock(&sk->sk_callback_lock);
- if (sk->sk_sleep && waitqueue_active(sk->sk_sleep))
+ if (sk_has_sleeper(sk))
wake_up_interruptible_sync_poll(sk->sk_sleep, POLLIN |
POLLRDNORM | POLLRDBAND);
sk_wake_async(sk, SOCK_WAKE_WAITD, POLL_IN);
@@ -1747,7 +1747,7 @@
* progress. --DaveM
*/
if ((atomic_read(&sk->sk_wmem_alloc) << 1) <= sk->sk_sndbuf) {
- if (sk->sk_sleep && waitqueue_active(sk->sk_sleep))
+ if (sk_has_sleeper(sk))
wake_up_interruptible_sync_poll(sk->sk_sleep, POLLOUT |
POLLWRNORM | POLLWRBAND);
diff --git a/net/dccp/output.c b/net/dccp/output.c
index c0e88c1..c96119f 100644
--- a/net/dccp/output.c
+++ b/net/dccp/output.c
@@ -196,7 +196,7 @@
{
read_lock(&sk->sk_callback_lock);
- if (sk->sk_sleep && waitqueue_active(sk->sk_sleep))
+ if (sk_has_sleeper(sk))
wake_up_interruptible(sk->sk_sleep);
/* Should agree with poll, otherwise some programs break */
if (sock_writeable(sk))
diff --git a/net/dccp/proto.c b/net/dccp/proto.c
index 314a1b5..94ca8ea 100644
--- a/net/dccp/proto.c
+++ b/net/dccp/proto.c
@@ -311,7 +311,7 @@
unsigned int mask;
struct sock *sk = sock->sk;
- poll_wait(file, sk->sk_sleep, wait);
+ sock_poll_wait(file, sk->sk_sleep, wait);
if (sk->sk_state == DCCP_LISTEN)
return inet_csk_listen_poll(sk);
diff --git a/net/decnet/af_decnet.c b/net/decnet/af_decnet.c
index d351b8d..77d4028 100644
--- a/net/decnet/af_decnet.c
+++ b/net/decnet/af_decnet.c
@@ -2413,6 +2413,8 @@
proc_net_remove(&init_net, "decnet");
proto_unregister(&dn_proto);
+
+ rcu_barrier_bh(); /* Wait for completion of call_rcu_bh()'s */
}
module_exit(decnet_exit);
#endif
diff --git a/net/dsa/mv88e6xxx.c b/net/dsa/mv88e6xxx.c
index 4e4d8b5..efe661a 100644
--- a/net/dsa/mv88e6xxx.c
+++ b/net/dsa/mv88e6xxx.c
@@ -418,7 +418,7 @@
int i;
for (i = 0; i < 10; i++) {
- ret = REG_READ(REG_GLOBAL2, 0x1d);
+ ret = REG_READ(REG_GLOBAL, 0x1d);
if ((ret & 0x8000) == 0)
return 0;
}
diff --git a/net/ieee802154/netlink.c b/net/ieee802154/netlink.c
index 105ad10..27eda9f 100644
--- a/net/ieee802154/netlink.c
+++ b/net/ieee802154/netlink.c
@@ -276,6 +276,9 @@
else
return NULL;
+ if (!dev)
+ return NULL;
+
if (dev->type != ARPHRD_IEEE802154) {
dev_put(dev);
return NULL;
@@ -521,3 +524,6 @@
}
module_exit(ieee802154_nl_exit);
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("ieee 802.15.4 configuration interface");
+
diff --git a/net/ipv4/arp.c b/net/ipv4/arp.c
index 8a3881e..c29d75d 100644
--- a/net/ipv4/arp.c
+++ b/net/ipv4/arp.c
@@ -801,11 +801,8 @@
* cache.
*/
- /*
- * Special case: IPv4 duplicate address detection packet (RFC2131)
- * and Gratuitous ARP/ARP Announce. (RFC3927, Section 2.4)
- */
- if (sip == 0 || tip == sip) {
+ /* Special case: IPv4 duplicate address detection packet (RFC2131) */
+ if (sip == 0) {
if (arp->ar_op == htons(ARPOP_REQUEST) &&
inet_addr_type(net, tip) == RTN_LOCAL &&
!arp_ignore(in_dev, sip, tip))
diff --git a/net/ipv4/fib_trie.c b/net/ipv4/fib_trie.c
index 012cf5a..63c2fa7 100644
--- a/net/ipv4/fib_trie.c
+++ b/net/ipv4/fib_trie.c
@@ -316,8 +316,8 @@
static const int halve_threshold = 25;
static const int inflate_threshold = 50;
-static const int halve_threshold_root = 8;
-static const int inflate_threshold_root = 15;
+static const int halve_threshold_root = 15;
+static const int inflate_threshold_root = 25;
static void __alias_free_mem(struct rcu_head *head)
@@ -1021,6 +1021,9 @@
(struct node *)tn, wasfull);
tp = node_parent((struct node *) tn);
+ if (!tp)
+ rcu_assign_pointer(t->trie, (struct node *)tn);
+
tnode_free_flush();
if (!tp)
break;
diff --git a/net/ipv4/ip_input.c b/net/ipv4/ip_input.c
index 490ce20..db46b4b 100644
--- a/net/ipv4/ip_input.c
+++ b/net/ipv4/ip_input.c
@@ -440,6 +440,9 @@
/* Remove any debris in the socket control block */
memset(IPCB(skb), 0, sizeof(struct inet_skb_parm));
+ /* Must drop socket now because of tproxy. */
+ skb_orphan(skb);
+
return NF_HOOK(PF_INET, NF_INET_PRE_ROUTING, skb, dev, NULL,
ip_rcv_finish);
diff --git a/net/ipv4/netfilter/nf_nat_helper.c b/net/ipv4/netfilter/nf_nat_helper.c
index 155c008..09172a6 100644
--- a/net/ipv4/netfilter/nf_nat_helper.c
+++ b/net/ipv4/netfilter/nf_nat_helper.c
@@ -191,7 +191,8 @@
ct, ctinfo);
/* Tell TCP window tracking about seq change */
nf_conntrack_tcp_update(skb, ip_hdrlen(skb),
- ct, CTINFO2DIR(ctinfo));
+ ct, CTINFO2DIR(ctinfo),
+ (int)rep_len - (int)match_len);
nf_conntrack_event_cache(IPCT_NATSEQADJ, ct);
}
@@ -377,6 +378,7 @@
struct tcphdr *tcph;
int dir;
__be32 newseq, newack;
+ s16 seqoff, ackoff;
struct nf_conn_nat *nat = nfct_nat(ct);
struct nf_nat_seq *this_way, *other_way;
@@ -390,15 +392,18 @@
tcph = (void *)skb->data + ip_hdrlen(skb);
if (after(ntohl(tcph->seq), this_way->correction_pos))
- newseq = htonl(ntohl(tcph->seq) + this_way->offset_after);
+ seqoff = this_way->offset_after;
else
- newseq = htonl(ntohl(tcph->seq) + this_way->offset_before);
+ seqoff = this_way->offset_before;
if (after(ntohl(tcph->ack_seq) - other_way->offset_before,
other_way->correction_pos))
- newack = htonl(ntohl(tcph->ack_seq) - other_way->offset_after);
+ ackoff = other_way->offset_after;
else
- newack = htonl(ntohl(tcph->ack_seq) - other_way->offset_before);
+ ackoff = other_way->offset_before;
+
+ newseq = htonl(ntohl(tcph->seq) + seqoff);
+ newack = htonl(ntohl(tcph->ack_seq) - ackoff);
inet_proto_csum_replace4(&tcph->check, skb, tcph->seq, newseq, 0);
inet_proto_csum_replace4(&tcph->check, skb, tcph->ack_seq, newack, 0);
@@ -413,7 +418,7 @@
if (!nf_nat_sack_adjust(skb, tcph, ct, ctinfo))
return 0;
- nf_conntrack_tcp_update(skb, ip_hdrlen(skb), ct, dir);
+ nf_conntrack_tcp_update(skb, ip_hdrlen(skb), ct, dir, seqoff);
return 1;
}
diff --git a/net/ipv4/tcp.c b/net/ipv4/tcp.c
index 17b89c5..9114524 100644
--- a/net/ipv4/tcp.c
+++ b/net/ipv4/tcp.c
@@ -339,7 +339,7 @@
struct sock *sk = sock->sk;
struct tcp_sock *tp = tcp_sk(sk);
- poll_wait(file, sk->sk_sleep, wait);
+ sock_poll_wait(file, sk->sk_sleep, wait);
if (sk->sk_state == TCP_LISTEN)
return inet_csk_listen_poll(sk);
@@ -903,13 +903,17 @@
iov++;
while (seglen > 0) {
- int copy;
+ int copy = 0;
+ int max = size_goal;
skb = tcp_write_queue_tail(sk);
+ if (tcp_send_head(sk)) {
+ if (skb->ip_summed == CHECKSUM_NONE)
+ max = mss_now;
+ copy = max - skb->len;
+ }
- if (!tcp_send_head(sk) ||
- (copy = size_goal - skb->len) <= 0) {
-
+ if (copy <= 0) {
new_segment:
/* Allocate new segment. If the interface is SG,
* allocate skb fitting to single page.
@@ -930,6 +934,7 @@
skb_entail(sk, skb);
copy = size_goal;
+ max = size_goal;
}
/* Try to append data to the end of skb. */
@@ -1028,7 +1033,7 @@
if ((seglen -= copy) == 0 && iovlen == 0)
goto out;
- if (skb->len < size_goal || (flags & MSG_OOB))
+ if (skb->len < max || (flags & MSG_OOB))
continue;
if (forced_push(tp)) {
diff --git a/net/ipv4/tcp_minisocks.c b/net/ipv4/tcp_minisocks.c
index 43bbba7..f8d67cc 100644
--- a/net/ipv4/tcp_minisocks.c
+++ b/net/ipv4/tcp_minisocks.c
@@ -128,7 +128,8 @@
goto kill_with_rst;
/* Dup ACK? */
- if (!after(TCP_SKB_CB(skb)->end_seq, tcptw->tw_rcv_nxt) ||
+ if (!th->ack ||
+ !after(TCP_SKB_CB(skb)->end_seq, tcptw->tw_rcv_nxt) ||
TCP_SKB_CB(skb)->end_seq == TCP_SKB_CB(skb)->seq) {
inet_twsk_put(tw);
return TCP_TW_SUCCESS;
diff --git a/net/ipv4/tcp_output.c b/net/ipv4/tcp_output.c
index 416fc4c..5bdf08d 100644
--- a/net/ipv4/tcp_output.c
+++ b/net/ipv4/tcp_output.c
@@ -725,7 +725,8 @@
static void tcp_set_skb_tso_segs(struct sock *sk, struct sk_buff *skb,
unsigned int mss_now)
{
- if (skb->len <= mss_now || !sk_can_gso(sk)) {
+ if (skb->len <= mss_now || !sk_can_gso(sk) ||
+ skb->ip_summed == CHECKSUM_NONE) {
/* Avoid the costly divide in the normal
* non-TSO case.
*/
diff --git a/net/ipv4/xfrm4_policy.c b/net/ipv4/xfrm4_policy.c
index 60d918c..0071ee6 100644
--- a/net/ipv4/xfrm4_policy.c
+++ b/net/ipv4/xfrm4_policy.c
@@ -136,7 +136,8 @@
case IPPROTO_TCP:
case IPPROTO_SCTP:
case IPPROTO_DCCP:
- if (pskb_may_pull(skb, xprth + 4 - skb->data)) {
+ if (xprth + 4 < skb->data ||
+ pskb_may_pull(skb, xprth + 4 - skb->data)) {
__be16 *ports = (__be16 *)xprth;
fl->fl_ip_sport = ports[!!reverse];
diff --git a/net/ipv6/addrconf.c b/net/ipv6/addrconf.c
index 8c1e86a..43b3c9f 100644
--- a/net/ipv6/addrconf.c
+++ b/net/ipv6/addrconf.c
@@ -1916,8 +1916,32 @@
update_lft = 1;
else if (stored_lft <= MIN_VALID_LIFETIME) {
/* valid_lft <= stored_lft is always true */
- /* XXX: IPsec */
- update_lft = 0;
+ /*
+ * RFC 4862 Section 5.5.3e:
+ * "Note that the preferred lifetime of
+ * the corresponding address is always
+ * reset to the Preferred Lifetime in
+ * the received Prefix Information
+ * option, regardless of whether the
+ * valid lifetime is also reset or
+ * ignored."
+ *
+ * So if the preferred lifetime in
+ * this advertisement is different
+ * than what we have stored, but the
+ * valid lifetime is invalid, just
+ * reset prefered_lft.
+ *
+ * We must set the valid lifetime
+ * to the stored lifetime since we'll
+ * be updating the timestamp below,
+ * else we'll set it back to the
+ * minumum.
+ */
+ if (prefered_lft != ifp->prefered_lft) {
+ valid_lft = stored_lft;
+ update_lft = 1;
+ }
} else {
valid_lft = MIN_VALID_LIFETIME;
if (valid_lft < prefered_lft)
@@ -3085,7 +3109,7 @@
spin_unlock(&ifp->lock);
continue;
} else if (age >= ifp->prefered_lft) {
- /* jiffies - ifp->tsamp > age >= ifp->prefered_lft */
+ /* jiffies - ifp->tstamp > age >= ifp->prefered_lft */
int deprecate = 0;
if (!(ifp->flags&IFA_F_DEPRECATED)) {
@@ -3362,7 +3386,10 @@
valid = ifa->valid_lft;
if (preferred != INFINITY_LIFE_TIME) {
long tval = (jiffies - ifa->tstamp)/HZ;
- preferred -= tval;
+ if (preferred > tval)
+ preferred -= tval;
+ else
+ preferred = 0;
if (valid != INFINITY_LIFE_TIME)
valid -= tval;
}
diff --git a/net/ipv6/af_inet6.c b/net/ipv6/af_inet6.c
index 85b3d00..caa0278 100644
--- a/net/ipv6/af_inet6.c
+++ b/net/ipv6/af_inet6.c
@@ -1284,6 +1284,8 @@
proto_unregister(&udplitev6_prot);
proto_unregister(&udpv6_prot);
proto_unregister(&tcpv6_prot);
+
+ rcu_barrier(); /* Wait for completion of call_rcu()'s */
}
module_exit(inet6_exit);
diff --git a/net/ipv6/ip6_input.c b/net/ipv6/ip6_input.c
index c3a07d7..6d6a427 100644
--- a/net/ipv6/ip6_input.c
+++ b/net/ipv6/ip6_input.c
@@ -139,6 +139,9 @@
rcu_read_unlock();
+ /* Must drop socket now because of tproxy. */
+ skb_orphan(skb);
+
return NF_HOOK(PF_INET6, NF_INET_PRE_ROUTING, skb, dev, NULL,
ip6_rcv_finish);
err:
diff --git a/net/ipv6/xfrm6_policy.c b/net/ipv6/xfrm6_policy.c
index b4b16a4..3a3c677 100644
--- a/net/ipv6/xfrm6_policy.c
+++ b/net/ipv6/xfrm6_policy.c
@@ -157,7 +157,8 @@
ipv6_addr_copy(&fl->fl6_dst, reverse ? &hdr->saddr : &hdr->daddr);
ipv6_addr_copy(&fl->fl6_src, reverse ? &hdr->daddr : &hdr->saddr);
- while (pskb_may_pull(skb, nh + offset + 1 - skb->data)) {
+ while (nh + offset + 1 < skb->data ||
+ pskb_may_pull(skb, nh + offset + 1 - skb->data)) {
nh = skb_network_header(skb);
exthdr = (struct ipv6_opt_hdr *)(nh + offset);
@@ -177,7 +178,8 @@
case IPPROTO_TCP:
case IPPROTO_SCTP:
case IPPROTO_DCCP:
- if (!onlyproto && pskb_may_pull(skb, nh + offset + 4 - skb->data)) {
+ if (!onlyproto && (nh + offset + 4 < skb->data ||
+ pskb_may_pull(skb, nh + offset + 4 - skb->data))) {
__be16 *ports = (__be16 *)exthdr;
fl->fl_ip_sport = ports[!!reverse];
diff --git a/net/ipx/af_ipx.c b/net/ipx/af_ipx.c
index 417b0e3..f1118d9 100644
--- a/net/ipx/af_ipx.c
+++ b/net/ipx/af_ipx.c
@@ -41,6 +41,7 @@
#include <linux/netdevice.h>
#include <linux/uio.h>
#include <linux/skbuff.h>
+#include <linux/smp_lock.h>
#include <linux/socket.h>
#include <linux/sockios.h>
#include <linux/string.h>
diff --git a/net/irda/af_irda.c b/net/irda/af_irda.c
index cb762c8..80cf29a 100644
--- a/net/irda/af_irda.c
+++ b/net/irda/af_irda.c
@@ -45,6 +45,7 @@
#include <linux/capability.h>
#include <linux/module.h>
#include <linux/types.h>
+#include <linux/smp_lock.h>
#include <linux/socket.h>
#include <linux/sockios.h>
#include <linux/init.h>
diff --git a/net/irda/irnet/irnet.h b/net/irda/irnet/irnet.h
index bccf4d0..b001c36 100644
--- a/net/irda/irnet/irnet.h
+++ b/net/irda/irnet/irnet.h
@@ -241,7 +241,6 @@
#include <linux/module.h>
#include <linux/kernel.h>
-#include <linux/smp_lock.h>
#include <linux/skbuff.h>
#include <linux/tty.h>
#include <linux/proc_fs.h>
diff --git a/net/irda/irnet/irnet_ppp.c b/net/irda/irnet/irnet_ppp.c
index 6d8ae03..68cbcb1 100644
--- a/net/irda/irnet/irnet_ppp.c
+++ b/net/irda/irnet/irnet_ppp.c
@@ -13,6 +13,7 @@
* 2) as a control channel (write commands, read events)
*/
+#include <linux/smp_lock.h>
#include "irnet_ppp.h" /* Private header */
/* Please put other headers in irnet.h - Thanks */
diff --git a/net/iucv/af_iucv.c b/net/iucv/af_iucv.c
index 6be5f92..49c15b4 100644
--- a/net/iucv/af_iucv.c
+++ b/net/iucv/af_iucv.c
@@ -306,7 +306,7 @@
static void iucv_sock_wake_msglim(struct sock *sk)
{
read_lock(&sk->sk_callback_lock);
- if (sk->sk_sleep && waitqueue_active(sk->sk_sleep))
+ if (sk_has_sleeper(sk))
wake_up_interruptible_all(sk->sk_sleep);
sk_wake_async(sk, SOCK_WAKE_SPACE, POLL_OUT);
read_unlock(&sk->sk_callback_lock);
@@ -1256,7 +1256,7 @@
struct sock *sk = sock->sk;
unsigned int mask = 0;
- poll_wait(file, sk->sk_sleep, wait);
+ sock_poll_wait(file, sk->sk_sleep, wait);
if (sk->sk_state == IUCV_LISTEN)
return iucv_accept_poll(sk);
diff --git a/net/mac80211/mesh.c b/net/mac80211/mesh.c
index fc712e6..11cf45b 100644
--- a/net/mac80211/mesh.c
+++ b/net/mac80211/mesh.c
@@ -494,7 +494,7 @@
* should it be using the interface and enqueuing
* frames at this very time on another CPU.
*/
- synchronize_rcu();
+ rcu_barrier(); /* Wait for RX path and call_rcu()'s */
skb_queue_purge(&sdata->u.mesh.skb_queue);
}
diff --git a/net/mac80211/mesh_hwmp.c b/net/mac80211/mesh_hwmp.c
index 003cb47..f49ef28 100644
--- a/net/mac80211/mesh_hwmp.c
+++ b/net/mac80211/mesh_hwmp.c
@@ -637,7 +637,7 @@
struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
struct mesh_preq_queue *preq_node;
- preq_node = kmalloc(sizeof(struct mesh_preq_queue), GFP_KERNEL);
+ preq_node = kmalloc(sizeof(struct mesh_preq_queue), GFP_ATOMIC);
if (!preq_node) {
printk(KERN_DEBUG "Mesh HWMP: could not allocate PREQ node\n");
return;
diff --git a/net/mac80211/rc80211_minstrel.c b/net/mac80211/rc80211_minstrel.c
index b218b98..37771ab 100644
--- a/net/mac80211/rc80211_minstrel.c
+++ b/net/mac80211/rc80211_minstrel.c
@@ -66,7 +66,7 @@
for (i = rix; i >= 0; i--)
if (mi->r[i].rix == rix)
break;
- WARN_ON(mi->r[i].rix != rix);
+ WARN_ON(i < 0);
return i;
}
@@ -181,6 +181,9 @@
break;
ndx = rix_to_ndx(mi, ar[i].idx);
+ if (ndx < 0)
+ continue;
+
mi->r[ndx].attempts += ar[i].count;
if ((i != IEEE80211_TX_MAX_RATES - 1) && (ar[i + 1].idx < 0))
diff --git a/net/netfilter/nf_conntrack_expect.c b/net/netfilter/nf_conntrack_expect.c
index afde8f9..2032dfe 100644
--- a/net/netfilter/nf_conntrack_expect.c
+++ b/net/netfilter/nf_conntrack_expect.c
@@ -617,8 +617,10 @@
void nf_conntrack_expect_fini(struct net *net)
{
exp_proc_remove(net);
- if (net_eq(net, &init_net))
+ if (net_eq(net, &init_net)) {
+ rcu_barrier(); /* Wait for call_rcu() before destroy */
kmem_cache_destroy(nf_ct_expect_cachep);
+ }
nf_ct_free_hashtable(net->ct.expect_hash, net->ct.expect_vmalloc,
nf_ct_expect_hsize);
}
diff --git a/net/netfilter/nf_conntrack_extend.c b/net/netfilter/nf_conntrack_extend.c
index 4b2c769..fef95be 100644
--- a/net/netfilter/nf_conntrack_extend.c
+++ b/net/netfilter/nf_conntrack_extend.c
@@ -186,6 +186,6 @@
rcu_assign_pointer(nf_ct_ext_types[type->id], NULL);
update_alloc_size(type);
mutex_unlock(&nf_ct_ext_type_mutex);
- synchronize_rcu();
+ rcu_barrier(); /* Wait for completion of call_rcu()'s */
}
EXPORT_SYMBOL_GPL(nf_ct_extend_unregister);
diff --git a/net/netfilter/nf_conntrack_proto_tcp.c b/net/netfilter/nf_conntrack_proto_tcp.c
index 33fc0a4..97a82ba 100644
--- a/net/netfilter/nf_conntrack_proto_tcp.c
+++ b/net/netfilter/nf_conntrack_proto_tcp.c
@@ -720,8 +720,8 @@
/* Caller must linearize skb at tcp header. */
void nf_conntrack_tcp_update(const struct sk_buff *skb,
unsigned int dataoff,
- struct nf_conn *ct,
- int dir)
+ struct nf_conn *ct, int dir,
+ s16 offset)
{
const struct tcphdr *tcph = (const void *)skb->data + dataoff;
const struct ip_ct_tcp_state *sender = &ct->proto.tcp.seen[dir];
@@ -734,7 +734,7 @@
/*
* We have to worry for the ack in the reply packet only...
*/
- if (after(end, ct->proto.tcp.seen[dir].td_end))
+ if (ct->proto.tcp.seen[dir].td_end + offset == end)
ct->proto.tcp.seen[dir].td_end = end;
ct->proto.tcp.last_end = end;
spin_unlock_bh(&ct->lock);
diff --git a/net/netfilter/xt_conntrack.c b/net/netfilter/xt_conntrack.c
index 0b7139f..fc58180 100644
--- a/net/netfilter/xt_conntrack.c
+++ b/net/netfilter/xt_conntrack.c
@@ -129,7 +129,7 @@
static inline bool
conntrack_mt_origsrc(const struct nf_conn *ct,
- const struct xt_conntrack_mtinfo1 *info,
+ const struct xt_conntrack_mtinfo2 *info,
u_int8_t family)
{
return conntrack_addrcmp(&ct->tuplehash[IP_CT_DIR_ORIGINAL].tuple.src.u3,
@@ -138,7 +138,7 @@
static inline bool
conntrack_mt_origdst(const struct nf_conn *ct,
- const struct xt_conntrack_mtinfo1 *info,
+ const struct xt_conntrack_mtinfo2 *info,
u_int8_t family)
{
return conntrack_addrcmp(&ct->tuplehash[IP_CT_DIR_ORIGINAL].tuple.dst.u3,
@@ -147,7 +147,7 @@
static inline bool
conntrack_mt_replsrc(const struct nf_conn *ct,
- const struct xt_conntrack_mtinfo1 *info,
+ const struct xt_conntrack_mtinfo2 *info,
u_int8_t family)
{
return conntrack_addrcmp(&ct->tuplehash[IP_CT_DIR_REPLY].tuple.src.u3,
@@ -156,7 +156,7 @@
static inline bool
conntrack_mt_repldst(const struct nf_conn *ct,
- const struct xt_conntrack_mtinfo1 *info,
+ const struct xt_conntrack_mtinfo2 *info,
u_int8_t family)
{
return conntrack_addrcmp(&ct->tuplehash[IP_CT_DIR_REPLY].tuple.dst.u3,
@@ -164,7 +164,7 @@
}
static inline bool
-ct_proto_port_check(const struct xt_conntrack_mtinfo1 *info,
+ct_proto_port_check(const struct xt_conntrack_mtinfo2 *info,
const struct nf_conn *ct)
{
const struct nf_conntrack_tuple *tuple;
@@ -204,7 +204,7 @@
static bool
conntrack_mt(const struct sk_buff *skb, const struct xt_match_param *par)
{
- const struct xt_conntrack_mtinfo1 *info = par->matchinfo;
+ const struct xt_conntrack_mtinfo2 *info = par->matchinfo;
enum ip_conntrack_info ctinfo;
const struct nf_conn *ct;
unsigned int statebit;
@@ -278,6 +278,16 @@
return true;
}
+static bool
+conntrack_mt_v1(const struct sk_buff *skb, const struct xt_match_param *par)
+{
+ const struct xt_conntrack_mtinfo2 *const *info = par->matchinfo;
+ struct xt_match_param newpar = *par;
+
+ newpar.matchinfo = *info;
+ return conntrack_mt(skb, &newpar);
+}
+
static bool conntrack_mt_check(const struct xt_mtchk_param *par)
{
if (nf_ct_l3proto_try_module_get(par->family) < 0) {
@@ -288,11 +298,45 @@
return true;
}
+static bool conntrack_mt_check_v1(const struct xt_mtchk_param *par)
+{
+ struct xt_conntrack_mtinfo1 *info = par->matchinfo;
+ struct xt_conntrack_mtinfo2 *up;
+ int ret = conntrack_mt_check(par);
+
+ if (ret < 0)
+ return ret;
+
+ up = kmalloc(sizeof(*up), GFP_KERNEL);
+ if (up == NULL) {
+ nf_ct_l3proto_module_put(par->family);
+ return -ENOMEM;
+ }
+
+ /*
+ * The strategy here is to minimize the overhead of v1 matching,
+ * by prebuilding a v2 struct and putting the pointer into the
+ * v1 dataspace.
+ */
+ memcpy(up, info, offsetof(typeof(*info), state_mask));
+ up->state_mask = info->state_mask;
+ up->status_mask = info->status_mask;
+ *(void **)info = up;
+ return true;
+}
+
static void conntrack_mt_destroy(const struct xt_mtdtor_param *par)
{
nf_ct_l3proto_module_put(par->family);
}
+static void conntrack_mt_destroy_v1(const struct xt_mtdtor_param *par)
+{
+ struct xt_conntrack_mtinfo2 **info = par->matchinfo;
+ kfree(*info);
+ conntrack_mt_destroy(par);
+}
+
#ifdef CONFIG_COMPAT
struct compat_xt_conntrack_info
{
@@ -363,6 +407,16 @@
.revision = 1,
.family = NFPROTO_UNSPEC,
.matchsize = sizeof(struct xt_conntrack_mtinfo1),
+ .match = conntrack_mt_v1,
+ .checkentry = conntrack_mt_check_v1,
+ .destroy = conntrack_mt_destroy_v1,
+ .me = THIS_MODULE,
+ },
+ {
+ .name = "conntrack",
+ .revision = 2,
+ .family = NFPROTO_UNSPEC,
+ .matchsize = sizeof(struct xt_conntrack_mtinfo2),
.match = conntrack_mt,
.checkentry = conntrack_mt_check,
.destroy = conntrack_mt_destroy,
diff --git a/net/phonet/pn_dev.c b/net/phonet/pn_dev.c
index 80a322d..b0d6ddd 100644
--- a/net/phonet/pn_dev.c
+++ b/net/phonet/pn_dev.c
@@ -69,10 +69,27 @@
return NULL;
}
-static void __phonet_device_free(struct phonet_device *pnd)
+static void phonet_device_destroy(struct net_device *dev)
{
- list_del(&pnd->list);
- kfree(pnd);
+ struct phonet_device_list *pndevs = phonet_device_list(dev_net(dev));
+ struct phonet_device *pnd;
+
+ ASSERT_RTNL();
+
+ spin_lock_bh(&pndevs->lock);
+ pnd = __phonet_get(dev);
+ if (pnd)
+ list_del(&pnd->list);
+ spin_unlock_bh(&pndevs->lock);
+
+ if (pnd) {
+ u8 addr;
+
+ for (addr = find_first_bit(pnd->addrs, 64); addr < 64;
+ addr = find_next_bit(pnd->addrs, 64, 1+addr))
+ phonet_address_notify(RTM_DELADDR, dev, addr);
+ kfree(pnd);
+ }
}
struct net_device *phonet_device_get(struct net *net)
@@ -126,8 +143,10 @@
pnd = __phonet_get(dev);
if (!pnd || !test_and_clear_bit(addr >> 2, pnd->addrs))
err = -EADDRNOTAVAIL;
- else if (bitmap_empty(pnd->addrs, 64))
- __phonet_device_free(pnd);
+ else if (bitmap_empty(pnd->addrs, 64)) {
+ list_del(&pnd->list);
+ kfree(pnd);
+ }
spin_unlock_bh(&pndevs->lock);
return err;
}
@@ -181,18 +200,8 @@
{
struct net_device *dev = arg;
- if (what == NETDEV_UNREGISTER) {
- struct phonet_device_list *pndevs;
- struct phonet_device *pnd;
-
- /* Destroy phonet-specific device data */
- pndevs = phonet_device_list(dev_net(dev));
- spin_lock_bh(&pndevs->lock);
- pnd = __phonet_get(dev);
- if (pnd)
- __phonet_device_free(pnd);
- spin_unlock_bh(&pndevs->lock);
- }
+ if (what == NETDEV_UNREGISTER)
+ phonet_device_destroy(dev);
return 0;
}
@@ -218,11 +227,12 @@
static void phonet_exit_net(struct net *net)
{
struct phonet_net *pnn = net_generic(net, phonet_net_id);
- struct phonet_device *pnd, *n;
+ struct net_device *dev;
- list_for_each_entry_safe(pnd, n, &pnn->pndevs.list, list)
- __phonet_device_free(pnd);
-
+ rtnl_lock();
+ for_each_netdev(net, dev)
+ phonet_device_destroy(dev);
+ rtnl_unlock();
kfree(pnn);
}
diff --git a/net/phonet/pn_netlink.c b/net/phonet/pn_netlink.c
index cec4e59..f8b4cee 100644
--- a/net/phonet/pn_netlink.c
+++ b/net/phonet/pn_netlink.c
@@ -32,7 +32,7 @@
static int fill_addr(struct sk_buff *skb, struct net_device *dev, u8 addr,
u32 pid, u32 seq, int event);
-static void rtmsg_notify(int event, struct net_device *dev, u8 addr)
+void phonet_address_notify(int event, struct net_device *dev, u8 addr)
{
struct sk_buff *skb;
int err = -ENOBUFS;
@@ -94,7 +94,7 @@
else
err = phonet_address_del(dev, pnaddr);
if (!err)
- rtmsg_notify(nlh->nlmsg_type, dev, pnaddr);
+ phonet_address_notify(nlh->nlmsg_type, dev, pnaddr);
return err;
}
diff --git a/net/rxrpc/af_rxrpc.c b/net/rxrpc/af_rxrpc.c
index eac5e7b..bfe493e 100644
--- a/net/rxrpc/af_rxrpc.c
+++ b/net/rxrpc/af_rxrpc.c
@@ -63,7 +63,7 @@
_enter("%p", sk);
read_lock(&sk->sk_callback_lock);
if (rxrpc_writable(sk)) {
- if (sk->sk_sleep && waitqueue_active(sk->sk_sleep))
+ if (sk_has_sleeper(sk))
wake_up_interruptible(sk->sk_sleep);
sk_wake_async(sk, SOCK_WAKE_SPACE, POLL_OUT);
}
@@ -588,7 +588,7 @@
unsigned int mask;
struct sock *sk = sock->sk;
- poll_wait(file, sk->sk_sleep, wait);
+ sock_poll_wait(file, sk->sk_sleep, wait);
mask = 0;
/* the socket is readable if there are any messages waiting on the Rx
diff --git a/net/sctp/output.c b/net/sctp/output.c
index b764114..b94c211 100644
--- a/net/sctp/output.c
+++ b/net/sctp/output.c
@@ -407,7 +407,7 @@
}
dst = dst_clone(tp->dst);
skb_dst_set(nskb, dst);
- if (dst)
+ if (!dst)
goto no_route;
/* Build the SCTP header. */
diff --git a/net/sctp/socket.c b/net/sctp/socket.c
index 35ba035..971890d 100644
--- a/net/sctp/socket.c
+++ b/net/sctp/socket.c
@@ -6652,21 +6652,6 @@
finish_wait(sk->sk_sleep, &wait);
}
-static void sctp_sock_rfree_frag(struct sk_buff *skb)
-{
- struct sk_buff *frag;
-
- if (!skb->data_len)
- goto done;
-
- /* Don't forget the fragments. */
- skb_walk_frags(skb, frag)
- sctp_sock_rfree_frag(frag);
-
-done:
- sctp_sock_rfree(skb);
-}
-
static void sctp_skb_set_owner_r_frag(struct sk_buff *skb, struct sock *sk)
{
struct sk_buff *frag;
@@ -6776,7 +6761,6 @@
sctp_skb_for_each(skb, &oldsk->sk_receive_queue, tmp) {
event = sctp_skb2event(skb);
if (event->asoc == assoc) {
- sctp_sock_rfree_frag(skb);
__skb_unlink(skb, &oldsk->sk_receive_queue);
__skb_queue_tail(&newsk->sk_receive_queue, skb);
sctp_skb_set_owner_r_frag(skb, newsk);
@@ -6807,7 +6791,6 @@
sctp_skb_for_each(skb, &oldsp->pd_lobby, tmp) {
event = sctp_skb2event(skb);
if (event->asoc == assoc) {
- sctp_sock_rfree_frag(skb);
__skb_unlink(skb, &oldsp->pd_lobby);
__skb_queue_tail(queue, skb);
sctp_skb_set_owner_r_frag(skb, newsk);
@@ -6822,15 +6805,11 @@
}
- sctp_skb_for_each(skb, &assoc->ulpq.reasm, tmp) {
- sctp_sock_rfree_frag(skb);
+ sctp_skb_for_each(skb, &assoc->ulpq.reasm, tmp)
sctp_skb_set_owner_r_frag(skb, newsk);
- }
- sctp_skb_for_each(skb, &assoc->ulpq.lobby, tmp) {
- sctp_sock_rfree_frag(skb);
+ sctp_skb_for_each(skb, &assoc->ulpq.lobby, tmp)
sctp_skb_set_owner_r_frag(skb, newsk);
- }
/* Set the type of socket to indicate that it is peeled off from the
* original UDP-style socket or created with the accept() call on a
diff --git a/net/sunrpc/clnt.c b/net/sunrpc/clnt.c
index 5bc2f45..ebfcf9b 100644
--- a/net/sunrpc/clnt.c
+++ b/net/sunrpc/clnt.c
@@ -28,7 +28,6 @@
#include <linux/kallsyms.h>
#include <linux/mm.h>
#include <linux/slab.h>
-#include <linux/smp_lock.h>
#include <linux/utsname.h>
#include <linux/workqueue.h>
#include <linux/in6.h>
diff --git a/net/sunrpc/sched.c b/net/sunrpc/sched.c
index 1102ce1..8f459ab 100644
--- a/net/sunrpc/sched.c
+++ b/net/sunrpc/sched.c
@@ -16,7 +16,6 @@
#include <linux/slab.h>
#include <linux/mempool.h>
#include <linux/smp.h>
-#include <linux/smp_lock.h>
#include <linux/spinlock.h>
#include <linux/mutex.h>
diff --git a/net/sunrpc/sunrpc_syms.c b/net/sunrpc/sunrpc_syms.c
index 843629f..adaa819 100644
--- a/net/sunrpc/sunrpc_syms.c
+++ b/net/sunrpc/sunrpc_syms.c
@@ -66,6 +66,7 @@
#ifdef CONFIG_PROC_FS
rpc_proc_exit();
#endif
+ rcu_barrier(); /* Wait for completion of call_rcu()'s */
}
MODULE_LICENSE("GPL");
module_init(init_sunrpc);
diff --git a/net/sunrpc/svc_xprt.c b/net/sunrpc/svc_xprt.c
index 6f33d33..27d4433 100644
--- a/net/sunrpc/svc_xprt.c
+++ b/net/sunrpc/svc_xprt.c
@@ -5,6 +5,7 @@
*/
#include <linux/sched.h>
+#include <linux/smp_lock.h>
#include <linux/errno.h>
#include <linux/freezer.h>
#include <linux/kthread.h>
diff --git a/net/unix/af_unix.c b/net/unix/af_unix.c
index 36d4e44..fc3ebb9 100644
--- a/net/unix/af_unix.c
+++ b/net/unix/af_unix.c
@@ -315,7 +315,7 @@
{
read_lock(&sk->sk_callback_lock);
if (unix_writable(sk)) {
- if (sk->sk_sleep && waitqueue_active(sk->sk_sleep))
+ if (sk_has_sleeper(sk))
wake_up_interruptible_sync(sk->sk_sleep);
sk_wake_async(sk, SOCK_WAKE_SPACE, POLL_OUT);
}
@@ -1985,7 +1985,7 @@
struct sock *sk = sock->sk;
unsigned int mask;
- poll_wait(file, sk->sk_sleep, wait);
+ sock_poll_wait(file, sk->sk_sleep, wait);
mask = 0;
/* exceptional events? */
@@ -2022,7 +2022,7 @@
struct sock *sk = sock->sk, *other;
unsigned int mask, writable;
- poll_wait(file, sk->sk_sleep, wait);
+ sock_poll_wait(file, sk->sk_sleep, wait);
mask = 0;
/* exceptional events? */
@@ -2053,7 +2053,7 @@
other = unix_peer_get(sk);
if (other) {
if (unix_peer(other) != sk) {
- poll_wait(file, &unix_sk(other)->peer_wait,
+ sock_poll_wait(file, &unix_sk(other)->peer_wait,
wait);
if (unix_recvq_full(other))
writable = 0;
diff --git a/net/wanrouter/wanmain.c b/net/wanrouter/wanmain.c
index 466e2d2..258daa8 100644
--- a/net/wanrouter/wanmain.c
+++ b/net/wanrouter/wanmain.c
@@ -48,6 +48,7 @@
#include <linux/kernel.h>
#include <linux/module.h> /* support for loadable modules */
#include <linux/slab.h> /* kmalloc(), kfree() */
+#include <linux/smp_lock.h>
#include <linux/mm.h>
#include <linux/string.h> /* inline mem*, str* functions */
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index 241bddd..43bdb13 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -447,6 +447,7 @@
rdev = __cfg80211_drv_from_info(info);
if (IS_ERR(rdev)) {
+ mutex_unlock(&cfg80211_mutex);
result = PTR_ERR(rdev);
goto unlock;
}
diff --git a/net/wireless/scan.c b/net/wireless/scan.c
index e95b638..f8e71b3 100644
--- a/net/wireless/scan.c
+++ b/net/wireless/scan.c
@@ -366,7 +366,6 @@
found = rb_find_bss(dev, res);
if (found) {
- kref_get(&found->ref);
found->pub.beacon_interval = res->pub.beacon_interval;
found->pub.tsf = res->pub.tsf;
found->pub.signal = res->pub.signal;
diff --git a/net/x25/af_x25.c b/net/x25/af_x25.c
index 21cdc87..5e6c072 100644
--- a/net/x25/af_x25.c
+++ b/net/x25/af_x25.c
@@ -40,6 +40,7 @@
#include <linux/errno.h>
#include <linux/kernel.h>
#include <linux/sched.h>
+#include <linux/smp_lock.h>
#include <linux/timer.h>
#include <linux/string.h>
#include <linux/net.h>
diff --git a/net/xfrm/xfrm_algo.c b/net/xfrm/xfrm_algo.c
index d31ccb4..faf54c6 100644
--- a/net/xfrm/xfrm_algo.c
+++ b/net/xfrm/xfrm_algo.c
@@ -292,8 +292,8 @@
}
},
{
- .name = "cbc(cast128)",
- .compat = "cast128",
+ .name = "cbc(cast5)",
+ .compat = "cast5",
.uinfo = {
.encr = {
diff --git a/net/xfrm/xfrm_state.c b/net/xfrm/xfrm_state.c
index 5f1f865..f2f7c63 100644
--- a/net/xfrm/xfrm_state.c
+++ b/net/xfrm/xfrm_state.c
@@ -668,22 +668,10 @@
hlist_for_each_entry(x, entry, net->xfrm.state_byspi+h, byspi) {
if (x->props.family != family ||
x->id.spi != spi ||
- x->id.proto != proto)
+ x->id.proto != proto ||
+ xfrm_addr_cmp(&x->id.daddr, daddr, family))
continue;
- switch (family) {
- case AF_INET:
- if (x->id.daddr.a4 != daddr->a4)
- continue;
- break;
- case AF_INET6:
- if (!ipv6_addr_equal((struct in6_addr *)daddr,
- (struct in6_addr *)
- x->id.daddr.a6))
- continue;
- break;
- }
-
xfrm_state_hold(x);
return x;
}
@@ -699,26 +687,11 @@
hlist_for_each_entry(x, entry, net->xfrm.state_bysrc+h, bysrc) {
if (x->props.family != family ||
- x->id.proto != proto)
+ x->id.proto != proto ||
+ xfrm_addr_cmp(&x->id.daddr, daddr, family) ||
+ xfrm_addr_cmp(&x->props.saddr, saddr, family))
continue;
- switch (family) {
- case AF_INET:
- if (x->id.daddr.a4 != daddr->a4 ||
- x->props.saddr.a4 != saddr->a4)
- continue;
- break;
- case AF_INET6:
- if (!ipv6_addr_equal((struct in6_addr *)daddr,
- (struct in6_addr *)
- x->id.daddr.a6) ||
- !ipv6_addr_equal((struct in6_addr *)saddr,
- (struct in6_addr *)
- x->props.saddr.a6))
- continue;
- break;
- }
-
xfrm_state_hold(x);
return x;
}
@@ -1001,25 +974,11 @@
x->props.family != family ||
x->km.state != XFRM_STATE_ACQ ||
x->id.spi != 0 ||
- x->id.proto != proto)
+ x->id.proto != proto ||
+ xfrm_addr_cmp(&x->id.daddr, daddr, family) ||
+ xfrm_addr_cmp(&x->props.saddr, saddr, family))
continue;
- switch (family) {
- case AF_INET:
- if (x->id.daddr.a4 != daddr->a4 ||
- x->props.saddr.a4 != saddr->a4)
- continue;
- break;
- case AF_INET6:
- if (!ipv6_addr_equal((struct in6_addr *)x->id.daddr.a6,
- (struct in6_addr *)daddr) ||
- !ipv6_addr_equal((struct in6_addr *)
- x->props.saddr.a6,
- (struct in6_addr *)saddr))
- continue;
- break;
- }
-
xfrm_state_hold(x);
return x;
}
diff --git a/scripts/.gitignore b/scripts/.gitignore
index b939fbd..52cab46a 100644
--- a/scripts/.gitignore
+++ b/scripts/.gitignore
@@ -7,3 +7,4 @@
bin2c
unifdef
binoffset
+ihex2fw
diff --git a/scripts/dtc/.gitignore b/scripts/dtc/.gitignore
new file mode 100644
index 0000000..095acb4
--- /dev/null
+++ b/scripts/dtc/.gitignore
@@ -0,0 +1,5 @@
+dtc
+dtc-lexer.lex.c
+dtc-parser.tab.c
+dtc-parser.tab.h
+
diff --git a/scripts/kernel-doc b/scripts/kernel-doc
index ed591e9..b52d340 100755
--- a/scripts/kernel-doc
+++ b/scripts/kernel-doc
@@ -1426,6 +1426,8 @@
# strip comments:
$members =~ s/\/\*.*?\*\///gos;
$nested =~ s/\/\*.*?\*\///gos;
+ # strip kmemcheck_bitfield_{begin,end}.*;
+ $members =~ s/kmemcheck_bitfield_.*?;//gos;
create_parameterlist($members, ';', $file);
check_sections($file, $declaration_name, "struct", $sectcheck, $struct_actual, $nested);
@@ -1468,8 +1470,6 @@
}
}
- # strip kmemcheck_bitfield_{begin,end}.*;
- $members =~ s/kmemcheck_bitfield_.*?;//gos;
output_declaration($declaration_name,
'enum',
diff --git a/scripts/package/builddeb b/scripts/package/builddeb
index 01c2d13..b19f1f4 100644
--- a/scripts/package/builddeb
+++ b/scripts/package/builddeb
@@ -16,6 +16,8 @@
local pname="$1" pdir="$2"
cp debian/copyright "$pdir/usr/share/doc/$pname/"
+ cp debian/changelog "$pdir/usr/share/doc/$pname/changelog.Debian"
+ gzip -9 "$pdir/usr/share/doc/$pname/changelog.Debian"
# Fix ownership and permissions
chown -R root:root "$pdir"
diff --git a/scripts/pnmtologo.c b/scripts/pnmtologo.c
index 64f5ddb..5c11312 100644
--- a/scripts/pnmtologo.c
+++ b/scripts/pnmtologo.c
@@ -237,7 +237,7 @@
fprintf(out, " * Linux logo %s\n", logoname);
fputs(" */\n\n", out);
fputs("#include <linux/linux_logo.h>\n\n", out);
- fprintf(out, "static const unsigned char %s_data[] __initconst = {\n",
+ fprintf(out, "static unsigned char %s_data[] __initdata = {\n",
logoname);
}
@@ -374,7 +374,7 @@
fputs("\n};\n\n", out);
/* write logo clut */
- fprintf(out, "static const unsigned char %s_clut[] __initconst = {\n",
+ fprintf(out, "static unsigned char %s_clut[] __initdata = {\n",
logoname);
write_hex_cnt = 0;
for (i = 0; i < logo_clutsize; i++) {
diff --git a/security/integrity/ima/ima_main.c b/security/integrity/ima/ima_main.c
index 6f61187..101c512 100644
--- a/security/integrity/ima/ima_main.c
+++ b/security/integrity/ima/ima_main.c
@@ -238,7 +238,34 @@
}
/*
- * ima_opens_get - increment file counts
+ * ima_counts_put - decrement file counts
+ *
+ * File counts are incremented in ima_path_check. On file open
+ * error, such as ETXTBSY, decrement the counts to prevent
+ * unnecessary imbalance messages.
+ */
+void ima_counts_put(struct path *path, int mask)
+{
+ struct inode *inode = path->dentry->d_inode;
+ struct ima_iint_cache *iint;
+
+ if (!ima_initialized || !S_ISREG(inode->i_mode))
+ return;
+ iint = ima_iint_find_insert_get(inode);
+ if (!iint)
+ return;
+
+ mutex_lock(&iint->mutex);
+ iint->opencount--;
+ if ((mask & MAY_WRITE) || (mask == 0))
+ iint->writecount--;
+ else if (mask & (MAY_READ | MAY_EXEC))
+ iint->readcount--;
+ mutex_unlock(&iint->mutex);
+}
+
+/*
+ * ima_counts_get - increment file counts
*
* - for IPC shm and shmat file.
* - for nfsd exported files.
diff --git a/security/integrity/ima/ima_queue.c b/security/integrity/ima/ima_queue.c
index 7ec9431..a0880e9 100644
--- a/security/integrity/ima/ima_queue.c
+++ b/security/integrity/ima/ima_queue.c
@@ -134,7 +134,8 @@
}
out:
mutex_unlock(&ima_extend_list_mutex);
- integrity_audit_msg(AUDIT_INTEGRITY_PCR, inode, entry->template_name,
+ integrity_audit_msg(AUDIT_INTEGRITY_PCR, inode,
+ entry->template.file_name,
op, audit_cause, result, audit_info);
return result;
}
diff --git a/sound/arm/pxa2xx-pcm-lib.c b/sound/arm/pxa2xx-pcm-lib.c
index 108b6432..6205f37 100644
--- a/sound/arm/pxa2xx-pcm-lib.c
+++ b/sound/arm/pxa2xx-pcm-lib.c
@@ -75,7 +75,7 @@
{
struct pxa2xx_runtime_data *rtd = substream->runtime->private_data;
- if (rtd && rtd->params)
+ if (rtd && rtd->params && rtd->params->drcmr)
*rtd->params->drcmr = 0;
snd_pcm_set_runtime_buffer(substream, NULL);
diff --git a/sound/oss/kahlua.c b/sound/oss/kahlua.c
index c180598..89466b0 100644
--- a/sound/oss/kahlua.c
+++ b/sound/oss/kahlua.c
@@ -199,7 +199,7 @@
*/
static struct pci_device_id id_tbl[] = {
- { PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_5530_AUDIO, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
+ { PCI_VDEVICE(CYRIX, PCI_DEVICE_ID_CYRIX_5530_AUDIO), 0 },
{ }
};
diff --git a/sound/oss/mpu401.c b/sound/oss/mpu401.c
index 6c0a770..1b2316f 100644
--- a/sound/oss/mpu401.c
+++ b/sound/oss/mpu401.c
@@ -926,31 +926,21 @@
static void mpu401_chk_version(int n, struct mpu_config *devc)
{
int tmp;
- unsigned long flags;
devc->version = devc->revision = 0;
- spin_lock_irqsave(&devc->lock,flags);
- if ((tmp = mpu_cmd(n, 0xAC, 0)) < 0)
- {
- spin_unlock_irqrestore(&devc->lock,flags);
+ tmp = mpu_cmd(n, 0xAC, 0);
+ if (tmp < 0)
return;
- }
if ((tmp & 0xf0) > 0x20) /* Why it's larger than 2.x ??? */
- {
- spin_unlock_irqrestore(&devc->lock,flags);
return;
- }
devc->version = tmp;
- if ((tmp = mpu_cmd(n, 0xAD, 0)) < 0)
- {
+ if ((tmp = mpu_cmd(n, 0xAD, 0)) < 0) {
devc->version = 0;
- spin_unlock_irqrestore(&devc->lock,flags);
return;
}
devc->revision = tmp;
- spin_unlock_irqrestore(&devc->lock,flags);
}
int attach_mpu401(struct address_info *hw_config, struct module *owner)
diff --git a/sound/pci/atiixp.c b/sound/pci/atiixp.c
index 71515dd..d6752df 100644
--- a/sound/pci/atiixp.c
+++ b/sound/pci/atiixp.c
@@ -287,10 +287,10 @@
/*
*/
static struct pci_device_id snd_atiixp_ids[] = {
- { 0x1002, 0x4341, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, /* SB200 */
- { 0x1002, 0x4361, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, /* SB300 */
- { 0x1002, 0x4370, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, /* SB400 */
- { 0x1002, 0x4382, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, /* SB600 */
+ { PCI_VDEVICE(ATI, 0x4341), 0 }, /* SB200 */
+ { PCI_VDEVICE(ATI, 0x4361), 0 }, /* SB300 */
+ { PCI_VDEVICE(ATI, 0x4370), 0 }, /* SB400 */
+ { PCI_VDEVICE(ATI, 0x4382), 0 }, /* SB600 */
{ 0, }
};
diff --git a/sound/pci/atiixp_modem.c b/sound/pci/atiixp_modem.c
index c3136cc..e7e147b 100644
--- a/sound/pci/atiixp_modem.c
+++ b/sound/pci/atiixp_modem.c
@@ -262,8 +262,8 @@
/*
*/
static struct pci_device_id snd_atiixp_ids[] = {
- { 0x1002, 0x434d, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, /* SB200 */
- { 0x1002, 0x4378, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, /* SB400 */
+ { PCI_VDEVICE(ATI, 0x434d), 0 }, /* SB200 */
+ { PCI_VDEVICE(ATI, 0x4378), 0 }, /* SB400 */
{ 0, }
};
diff --git a/sound/pci/au88x0/au8810.c b/sound/pci/au88x0/au8810.c
index fce22c7..c0e8c6b 100644
--- a/sound/pci/au88x0/au8810.c
+++ b/sound/pci/au88x0/au8810.c
@@ -1,8 +1,7 @@
#include "au8810.h"
#include "au88x0.h"
static struct pci_device_id snd_vortex_ids[] = {
- {PCI_VENDOR_ID_AUREAL, PCI_DEVICE_ID_AUREAL_ADVANTAGE,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0, 1,},
+ {PCI_VDEVICE(AUREAL, PCI_DEVICE_ID_AUREAL_ADVANTAGE), 1,},
{0,}
};
diff --git a/sound/pci/au88x0/au8820.c b/sound/pci/au88x0/au8820.c
index d1fbcce..a652733 100644
--- a/sound/pci/au88x0/au8820.c
+++ b/sound/pci/au88x0/au8820.c
@@ -1,8 +1,7 @@
#include "au8820.h"
#include "au88x0.h"
static struct pci_device_id snd_vortex_ids[] = {
- {PCI_VENDOR_ID_AUREAL, PCI_DEVICE_ID_AUREAL_VORTEX_1,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0,},
+ {PCI_VDEVICE(AUREAL, PCI_DEVICE_ID_AUREAL_VORTEX_1), 0,},
{0,}
};
diff --git a/sound/pci/au88x0/au8830.c b/sound/pci/au88x0/au8830.c
index d4f2717..6c702ad 100644
--- a/sound/pci/au88x0/au8830.c
+++ b/sound/pci/au88x0/au8830.c
@@ -1,8 +1,7 @@
#include "au8830.h"
#include "au88x0.h"
static struct pci_device_id snd_vortex_ids[] = {
- {PCI_VENDOR_ID_AUREAL, PCI_DEVICE_ID_AUREAL_VORTEX_2,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0,},
+ {PCI_VDEVICE(AUREAL, PCI_DEVICE_ID_AUREAL_VORTEX_2), 0,},
{0,}
};
diff --git a/sound/pci/ca0106/ca0106_main.c b/sound/pci/ca0106/ca0106_main.c
index 57b992a..f24bf1e 100644
--- a/sound/pci/ca0106/ca0106_main.c
+++ b/sound/pci/ca0106/ca0106_main.c
@@ -1876,7 +1876,7 @@
// PCI IDs
static struct pci_device_id snd_ca0106_ids[] = {
- { 0x1102, 0x0007, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, /* Audigy LS or Live 24bit */
+ { PCI_VDEVICE(CREATIVE, 0x0007), 0 }, /* Audigy LS or Live 24bit */
{ 0, }
};
MODULE_DEVICE_TABLE(pci, snd_ca0106_ids);
diff --git a/sound/pci/cmipci.c b/sound/pci/cmipci.c
index 449fe02..ddcd4a9 100644
--- a/sound/pci/cmipci.c
+++ b/sound/pci/cmipci.c
@@ -2797,11 +2797,11 @@
static struct pci_device_id snd_cmipci_ids[] = {
- {PCI_VENDOR_ID_CMEDIA, PCI_DEVICE_ID_CMEDIA_CM8338A, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
- {PCI_VENDOR_ID_CMEDIA, PCI_DEVICE_ID_CMEDIA_CM8338B, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
- {PCI_VENDOR_ID_CMEDIA, PCI_DEVICE_ID_CMEDIA_CM8738, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
- {PCI_VENDOR_ID_CMEDIA, PCI_DEVICE_ID_CMEDIA_CM8738B, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
- {PCI_VENDOR_ID_AL, PCI_DEVICE_ID_CMEDIA_CM8738, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
+ {PCI_VDEVICE(CMEDIA, PCI_DEVICE_ID_CMEDIA_CM8338A), 0},
+ {PCI_VDEVICE(CMEDIA, PCI_DEVICE_ID_CMEDIA_CM8338B), 0},
+ {PCI_VDEVICE(CMEDIA, PCI_DEVICE_ID_CMEDIA_CM8738), 0},
+ {PCI_VDEVICE(CMEDIA, PCI_DEVICE_ID_CMEDIA_CM8738B), 0},
+ {PCI_VDEVICE(AL, PCI_DEVICE_ID_CMEDIA_CM8738), 0},
{0,},
};
diff --git a/sound/pci/cs4281.c b/sound/pci/cs4281.c
index f6286f8..e2e0359 100644
--- a/sound/pci/cs4281.c
+++ b/sound/pci/cs4281.c
@@ -495,7 +495,7 @@
static irqreturn_t snd_cs4281_interrupt(int irq, void *dev_id);
static struct pci_device_id snd_cs4281_ids[] = {
- { 0x1013, 0x6005, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0, }, /* CS4281 */
+ { PCI_VDEVICE(CIRRUS, 0x6005), 0, }, /* CS4281 */
{ 0, }
};
diff --git a/sound/pci/cs46xx/cs46xx.c b/sound/pci/cs46xx/cs46xx.c
index c9b3e3d..033aec4 100644
--- a/sound/pci/cs46xx/cs46xx.c
+++ b/sound/pci/cs46xx/cs46xx.c
@@ -65,9 +65,9 @@
MODULE_PARM_DESC(mmap_valid, "Support OSS mmap.");
static struct pci_device_id snd_cs46xx_ids[] = {
- { 0x1013, 0x6001, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0, }, /* CS4280 */
- { 0x1013, 0x6003, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0, }, /* CS4612 */
- { 0x1013, 0x6004, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0, }, /* CS4615 */
+ { PCI_VDEVICE(CIRRUS, 0x6001), 0, }, /* CS4280 */
+ { PCI_VDEVICE(CIRRUS, 0x6003), 0, }, /* CS4612 */
+ { PCI_VDEVICE(CIRRUS, 0x6004), 0, }, /* CS4615 */
{ 0, }
};
diff --git a/sound/pci/emu10k1/emu10k1.c b/sound/pci/emu10k1/emu10k1.c
index c7f3b99..168af67 100644
--- a/sound/pci/emu10k1/emu10k1.c
+++ b/sound/pci/emu10k1/emu10k1.c
@@ -77,9 +77,9 @@
* Class 0401: 1102:0008 (rev 00) Subsystem: 1102:1001 -> Audigy2 Value Model:SB0400
*/
static struct pci_device_id snd_emu10k1_ids[] = {
- { 0x1102, 0x0002, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, /* EMU10K1 */
- { 0x1102, 0x0004, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 1 }, /* Audigy */
- { 0x1102, 0x0008, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 1 }, /* Audigy 2 Value SB0400 */
+ { PCI_VDEVICE(CREATIVE, 0x0002), 0 }, /* EMU10K1 */
+ { PCI_VDEVICE(CREATIVE, 0x0004), 1 }, /* Audigy */
+ { PCI_VDEVICE(CREATIVE, 0x0008), 1 }, /* Audigy 2 Value SB0400 */
{ 0, }
};
diff --git a/sound/pci/emu10k1/emu10k1x.c b/sound/pci/emu10k1/emu10k1x.c
index 4d3ad79..36e08bd 100644
--- a/sound/pci/emu10k1/emu10k1x.c
+++ b/sound/pci/emu10k1/emu10k1x.c
@@ -1607,7 +1607,7 @@
// PCI IDs
static struct pci_device_id snd_emu10k1x_ids[] = {
- { 0x1102, 0x0006, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, /* Dell OEM version (EMU10K1) */
+ { PCI_VDEVICE(CREATIVE, 0x0006), 0 }, /* Dell OEM version (EMU10K1) */
{ 0, }
};
MODULE_DEVICE_TABLE(pci, snd_emu10k1x_ids);
diff --git a/sound/pci/emu10k1/p16v.c b/sound/pci/emu10k1/p16v.c
index e617aca..61b8ab3 100644
--- a/sound/pci/emu10k1/p16v.c
+++ b/sound/pci/emu10k1/p16v.c
@@ -644,7 +644,7 @@
int err;
int capture=1;
- /* snd_printk("KERN_DEBUG snd_p16v_pcm called. device=%d\n", device); */
+ /* snd_printk(KERN_DEBUG "snd_p16v_pcm called. device=%d\n", device); */
emu->p16v_device_offset = device;
if (rpcm)
*rpcm = NULL;
diff --git a/sound/pci/ens1370.c b/sound/pci/ens1370.c
index 18f4d1e..2b82c5c 100644
--- a/sound/pci/ens1370.c
+++ b/sound/pci/ens1370.c
@@ -445,12 +445,12 @@
static struct pci_device_id snd_audiopci_ids[] = {
#ifdef CHIP1370
- { 0x1274, 0x5000, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0, }, /* ES1370 */
+ { PCI_VDEVICE(ENSONIQ, 0x5000), 0, }, /* ES1370 */
#endif
#ifdef CHIP1371
- { 0x1274, 0x1371, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0, }, /* ES1371 */
- { 0x1274, 0x5880, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0, }, /* ES1373 - CT5880 */
- { 0x1102, 0x8938, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0, }, /* Ectiva EV1938 */
+ { PCI_VDEVICE(ENSONIQ, 0x1371), 0, }, /* ES1371 */
+ { PCI_VDEVICE(ENSONIQ, 0x5880), 0, }, /* ES1373 - CT5880 */
+ { PCI_VDEVICE(ECTIVA, 0x8938), 0, }, /* Ectiva EV1938 */
#endif
{ 0, }
};
diff --git a/sound/pci/es1938.c b/sound/pci/es1938.c
index fbd2ac0..820318e 100644
--- a/sound/pci/es1938.c
+++ b/sound/pci/es1938.c
@@ -244,7 +244,7 @@
static irqreturn_t snd_es1938_interrupt(int irq, void *dev_id);
static struct pci_device_id snd_es1938_ids[] = {
- { 0x125d, 0x1969, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0, }, /* Solo-1 */
+ { PCI_VDEVICE(ESS, 0x1969), 0, }, /* Solo-1 */
{ 0, }
};
diff --git a/sound/pci/hda/hda_beep.c b/sound/pci/hda/hda_beep.c
index 29272f2..b0275a0 100644
--- a/sound/pci/hda/hda_beep.c
+++ b/sound/pci/hda/hda_beep.c
@@ -50,19 +50,22 @@
* The tone frequency of beep generator on IDT/STAC codecs is
* defined from the 8bit tone parameter, in Hz,
* freq = 48000 * (257 - tone) / 1024
- * that is from 12kHz to 93.75kHz in step of 46.875 hz
+ * that is from 12kHz to 93.75Hz in steps of 46.875 Hz
*/
static int beep_linear_tone(struct hda_beep *beep, int hz)
{
+ if (hz <= 0)
+ return 0;
hz *= 1000; /* fixed point */
- hz = hz - DIGBEEP_HZ_MIN;
+ hz = hz - DIGBEEP_HZ_MIN
+ + DIGBEEP_HZ_STEP / 2; /* round to nearest step */
if (hz < 0)
hz = 0; /* turn off PC beep*/
else if (hz >= (DIGBEEP_HZ_MAX - DIGBEEP_HZ_MIN))
- hz = 0xff;
+ hz = 1; /* max frequency */
else {
hz /= DIGBEEP_HZ_STEP;
- hz++;
+ hz = 255 - hz;
}
return hz;
}
diff --git a/sound/pci/hda/hda_codec.c b/sound/pci/hda/hda_codec.c
index 462e2ce..26d255d 100644
--- a/sound/pci/hda/hda_codec.c
+++ b/sound/pci/hda/hda_codec.c
@@ -3470,10 +3470,16 @@
}
mutex_lock(&codec->spdif_mutex);
if (mout->share_spdif) {
- runtime->hw.rates &= mout->spdif_rates;
- runtime->hw.formats &= mout->spdif_formats;
- if (mout->spdif_maxbps < hinfo->maxbps)
- hinfo->maxbps = mout->spdif_maxbps;
+ if ((runtime->hw.rates & mout->spdif_rates) &&
+ (runtime->hw.formats & mout->spdif_formats)) {
+ runtime->hw.rates &= mout->spdif_rates;
+ runtime->hw.formats &= mout->spdif_formats;
+ if (mout->spdif_maxbps < hinfo->maxbps)
+ hinfo->maxbps = mout->spdif_maxbps;
+ } else {
+ mout->share_spdif = 0;
+ /* FIXME: need notify? */
+ }
}
mutex_unlock(&codec->spdif_mutex);
}
diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c
index 4e9ea70..77c1b84 100644
--- a/sound/pci/hda/hda_intel.c
+++ b/sound/pci/hda/hda_intel.c
@@ -1454,6 +1454,18 @@
mutex_unlock(&chip->open_mutex);
return err;
}
+ snd_pcm_limit_hw_rates(runtime);
+ /* sanity check */
+ if (snd_BUG_ON(!runtime->hw.channels_min) ||
+ snd_BUG_ON(!runtime->hw.channels_max) ||
+ snd_BUG_ON(!runtime->hw.formats) ||
+ snd_BUG_ON(!runtime->hw.rates)) {
+ azx_release_device(azx_dev);
+ hinfo->ops.close(hinfo, apcm->codec, substream);
+ snd_hda_power_down(apcm->codec);
+ mutex_unlock(&chip->open_mutex);
+ return -EINVAL;
+ }
spin_lock_irqsave(&chip->reg_lock, flags);
azx_dev->substream = substream;
azx_dev->running = 0;
@@ -1462,7 +1474,6 @@
runtime->private_data = azx_dev;
snd_pcm_set_sync(substream);
mutex_unlock(&chip->open_mutex);
-
return 0;
}
@@ -2322,9 +2333,19 @@
gcap = azx_readw(chip, GCAP);
snd_printdd(SFX "chipset global capabilities = 0x%x\n", gcap);
- /* ATI chips seems buggy about 64bit DMA addresses */
- if (chip->driver_type == AZX_DRIVER_ATI)
- gcap &= ~ICH6_GCAP_64OK;
+ /* disable SB600 64bit support for safety */
+ if ((chip->driver_type == AZX_DRIVER_ATI) ||
+ (chip->driver_type == AZX_DRIVER_ATIHDMI)) {
+ struct pci_dev *p_smbus;
+ p_smbus = pci_get_device(PCI_VENDOR_ID_ATI,
+ PCI_DEVICE_ID_ATI_SBX00_SMBUS,
+ NULL);
+ if (p_smbus) {
+ if (p_smbus->revision < 0x30)
+ gcap &= ~ICH6_GCAP_64OK;
+ pci_dev_put(p_smbus);
+ }
+ }
/* allow 64bit DMA address if supported by H/W */
if ((gcap & ICH6_GCAP_64OK) && !pci_set_dma_mask(pci, DMA_BIT_MASK(64)))
diff --git a/sound/pci/hda/patch_analog.c b/sound/pci/hda/patch_analog.c
index 84cc49c..be7d25f 100644
--- a/sound/pci/hda/patch_analog.c
+++ b/sound/pci/hda/patch_analog.c
@@ -72,6 +72,7 @@
hda_nid_t private_dac_nids[AUTO_CFG_MAX_OUTS];
unsigned int jack_present :1;
+ unsigned int inv_jack_detect:1;
#ifdef CONFIG_SND_HDA_POWER_SAVE
struct hda_loopback_check loopback;
@@ -669,13 +670,15 @@
},
};
-static struct snd_kcontrol_new ad1986a_laptop_eapd_mixers[] = {
+static struct snd_kcontrol_new ad1986a_laptop_master_mixers[] = {
HDA_BIND_VOL("Master Playback Volume", &ad1986a_laptop_master_vol),
HDA_BIND_SW("Master Playback Switch", &ad1986a_laptop_master_sw),
+ { } /* end */
+};
+
+static struct snd_kcontrol_new ad1986a_laptop_eapd_mixers[] = {
HDA_CODEC_VOLUME("PCM Playback Volume", 0x03, 0x0, HDA_OUTPUT),
HDA_CODEC_MUTE("PCM Playback Switch", 0x03, 0x0, HDA_OUTPUT),
- HDA_CODEC_VOLUME("Internal Mic Playback Volume", 0x17, 0, HDA_OUTPUT),
- HDA_CODEC_MUTE("Internal Mic Playback Switch", 0x17, 0, HDA_OUTPUT),
HDA_CODEC_VOLUME("Mic Playback Volume", 0x13, 0x0, HDA_OUTPUT),
HDA_CODEC_MUTE("Mic Playback Switch", 0x13, 0x0, HDA_OUTPUT),
HDA_CODEC_VOLUME("Mic Boost", 0x0f, 0x0, HDA_OUTPUT),
@@ -699,31 +702,9 @@
{ } /* end */
};
-static struct snd_kcontrol_new ad1986a_samsung_mixers[] = {
- HDA_BIND_VOL("Master Playback Volume", &ad1986a_laptop_master_vol),
- HDA_BIND_SW("Master Playback Switch", &ad1986a_laptop_master_sw),
- HDA_CODEC_VOLUME("PCM Playback Volume", 0x03, 0x0, HDA_OUTPUT),
- HDA_CODEC_MUTE("PCM Playback Switch", 0x03, 0x0, HDA_OUTPUT),
- HDA_CODEC_VOLUME("Mic Playback Volume", 0x13, 0x0, HDA_OUTPUT),
- HDA_CODEC_MUTE("Mic Playback Switch", 0x13, 0x0, HDA_OUTPUT),
- HDA_CODEC_VOLUME("Mic Boost", 0x0f, 0x0, HDA_OUTPUT),
- HDA_CODEC_VOLUME("Capture Volume", 0x12, 0x0, HDA_OUTPUT),
- HDA_CODEC_MUTE("Capture Switch", 0x12, 0x0, HDA_OUTPUT),
- {
- .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
- .name = "Capture Source",
- .info = ad198x_mux_enum_info,
- .get = ad198x_mux_enum_get,
- .put = ad198x_mux_enum_put,
- },
- {
- .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
- .name = "External Amplifier",
- .info = ad198x_eapd_info,
- .get = ad198x_eapd_get,
- .put = ad198x_eapd_put,
- .private_value = 0x1b | (1 << 8), /* port-D, inversed */
- },
+static struct snd_kcontrol_new ad1986a_laptop_intmic_mixers[] = {
+ HDA_CODEC_VOLUME("Internal Mic Playback Volume", 0x17, 0, HDA_OUTPUT),
+ HDA_CODEC_MUTE("Internal Mic Playback Switch", 0x17, 0, HDA_OUTPUT),
{ } /* end */
};
@@ -776,8 +757,9 @@
unsigned int present;
present = snd_hda_codec_read(codec, 0x1a, 0, AC_VERB_GET_PIN_SENSE, 0);
- /* Lenovo N100 seems to report the reversed bit for HP jack-sensing */
- spec->jack_present = !(present & 0x80000000);
+ spec->jack_present = !!(present & 0x80000000);
+ if (spec->inv_jack_detect)
+ spec->jack_present = !spec->jack_present;
ad1986a_update_hp(codec);
}
@@ -816,7 +798,7 @@
return change;
}
-static struct snd_kcontrol_new ad1986a_laptop_automute_mixers[] = {
+static struct snd_kcontrol_new ad1986a_automute_master_mixers[] = {
HDA_BIND_VOL("Master Playback Volume", &ad1986a_laptop_master_vol),
{
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
@@ -826,33 +808,10 @@
.put = ad1986a_hp_master_sw_put,
.private_value = HDA_COMPOSE_AMP_VAL(0x1a, 3, 0, HDA_OUTPUT),
},
- HDA_CODEC_VOLUME("PCM Playback Volume", 0x03, 0x0, HDA_OUTPUT),
- HDA_CODEC_MUTE("PCM Playback Switch", 0x03, 0x0, HDA_OUTPUT),
- HDA_CODEC_VOLUME("Internal Mic Playback Volume", 0x17, 0x0, HDA_OUTPUT),
- HDA_CODEC_MUTE("Internal Mic Playback Switch", 0x17, 0x0, HDA_OUTPUT),
- HDA_CODEC_VOLUME("Mic Playback Volume", 0x13, 0x0, HDA_OUTPUT),
- HDA_CODEC_MUTE("Mic Playback Switch", 0x13, 0x0, HDA_OUTPUT),
- HDA_CODEC_VOLUME("Mic Boost", 0x0f, 0x0, HDA_OUTPUT),
- HDA_CODEC_VOLUME("Capture Volume", 0x12, 0x0, HDA_OUTPUT),
- HDA_CODEC_MUTE("Capture Switch", 0x12, 0x0, HDA_OUTPUT),
- {
- .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
- .name = "Capture Source",
- .info = ad198x_mux_enum_info,
- .get = ad198x_mux_enum_get,
- .put = ad198x_mux_enum_put,
- },
- {
- .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
- .name = "External Amplifier",
- .info = ad198x_eapd_info,
- .get = ad198x_eapd_get,
- .put = ad198x_eapd_put,
- .private_value = 0x1b | (1 << 8), /* port-D, inversed */
- },
{ } /* end */
};
+
/*
* initialization verbs
*/
@@ -981,6 +940,27 @@
{}
};
+static void ad1986a_samsung_p50_unsol_event(struct hda_codec *codec,
+ unsigned int res)
+{
+ switch (res >> 26) {
+ case AD1986A_HP_EVENT:
+ ad1986a_hp_automute(codec);
+ break;
+ case AD1986A_MIC_EVENT:
+ ad1986a_automic(codec);
+ break;
+ }
+}
+
+static int ad1986a_samsung_p50_init(struct hda_codec *codec)
+{
+ ad198x_init(codec);
+ ad1986a_hp_automute(codec);
+ ad1986a_automic(codec);
+ return 0;
+}
+
/* models */
enum {
@@ -991,6 +971,7 @@
AD1986A_LAPTOP_AUTOMUTE,
AD1986A_ULTRA,
AD1986A_SAMSUNG,
+ AD1986A_SAMSUNG_P50,
AD1986A_MODELS
};
@@ -1002,6 +983,7 @@
[AD1986A_LAPTOP_AUTOMUTE] = "laptop-automute",
[AD1986A_ULTRA] = "ultra",
[AD1986A_SAMSUNG] = "samsung",
+ [AD1986A_SAMSUNG_P50] = "samsung-p50",
};
static struct snd_pci_quirk ad1986a_cfg_tbl[] = {
@@ -1024,6 +1006,7 @@
SND_PCI_QUIRK(0x1179, 0xff40, "Toshiba", AD1986A_LAPTOP_EAPD),
SND_PCI_QUIRK(0x144d, 0xb03c, "Samsung R55", AD1986A_3STACK),
SND_PCI_QUIRK(0x144d, 0xc01e, "FSC V2060", AD1986A_LAPTOP),
+ SND_PCI_QUIRK(0x144d, 0xc024, "Samsung P50", AD1986A_SAMSUNG_P50),
SND_PCI_QUIRK(0x144d, 0xc027, "Samsung Q1", AD1986A_ULTRA),
SND_PCI_QUIRK_MASK(0x144d, 0xff00, 0xc000, "Samsung", AD1986A_SAMSUNG),
SND_PCI_QUIRK(0x144d, 0xc504, "Samsung Q35", AD1986A_3STACK),
@@ -1111,7 +1094,10 @@
spec->multiout.dac_nids = ad1986a_laptop_dac_nids;
break;
case AD1986A_LAPTOP_EAPD:
- spec->mixers[0] = ad1986a_laptop_eapd_mixers;
+ spec->num_mixers = 3;
+ spec->mixers[0] = ad1986a_laptop_master_mixers;
+ spec->mixers[1] = ad1986a_laptop_eapd_mixers;
+ spec->mixers[2] = ad1986a_laptop_intmic_mixers;
spec->num_init_verbs = 2;
spec->init_verbs[1] = ad1986a_eapd_init_verbs;
spec->multiout.max_channels = 2;
@@ -1122,7 +1108,9 @@
spec->input_mux = &ad1986a_laptop_eapd_capture_source;
break;
case AD1986A_SAMSUNG:
- spec->mixers[0] = ad1986a_samsung_mixers;
+ spec->num_mixers = 2;
+ spec->mixers[0] = ad1986a_laptop_master_mixers;
+ spec->mixers[1] = ad1986a_laptop_eapd_mixers;
spec->num_init_verbs = 3;
spec->init_verbs[1] = ad1986a_eapd_init_verbs;
spec->init_verbs[2] = ad1986a_automic_verbs;
@@ -1135,8 +1123,28 @@
codec->patch_ops.unsol_event = ad1986a_automic_unsol_event;
codec->patch_ops.init = ad1986a_automic_init;
break;
+ case AD1986A_SAMSUNG_P50:
+ spec->num_mixers = 2;
+ spec->mixers[0] = ad1986a_automute_master_mixers;
+ spec->mixers[1] = ad1986a_laptop_eapd_mixers;
+ spec->num_init_verbs = 4;
+ spec->init_verbs[1] = ad1986a_eapd_init_verbs;
+ spec->init_verbs[2] = ad1986a_automic_verbs;
+ spec->init_verbs[3] = ad1986a_hp_init_verbs;
+ spec->multiout.max_channels = 2;
+ spec->multiout.num_dacs = 1;
+ spec->multiout.dac_nids = ad1986a_laptop_dac_nids;
+ if (!is_jack_available(codec, 0x25))
+ spec->multiout.dig_out_nid = 0;
+ spec->input_mux = &ad1986a_automic_capture_source;
+ codec->patch_ops.unsol_event = ad1986a_samsung_p50_unsol_event;
+ codec->patch_ops.init = ad1986a_samsung_p50_init;
+ break;
case AD1986A_LAPTOP_AUTOMUTE:
- spec->mixers[0] = ad1986a_laptop_automute_mixers;
+ spec->num_mixers = 3;
+ spec->mixers[0] = ad1986a_automute_master_mixers;
+ spec->mixers[1] = ad1986a_laptop_eapd_mixers;
+ spec->mixers[2] = ad1986a_laptop_intmic_mixers;
spec->num_init_verbs = 3;
spec->init_verbs[1] = ad1986a_eapd_init_verbs;
spec->init_verbs[2] = ad1986a_hp_init_verbs;
@@ -1148,6 +1156,10 @@
spec->input_mux = &ad1986a_laptop_eapd_capture_source;
codec->patch_ops.unsol_event = ad1986a_hp_unsol_event;
codec->patch_ops.init = ad1986a_hp_init;
+ /* Lenovo N100 seems to report the reversed bit
+ * for HP jack-sensing
+ */
+ spec->inv_jack_detect = 1;
break;
case AD1986A_ULTRA:
spec->mixers[0] = ad1986a_laptop_eapd_mixers;
@@ -3734,9 +3746,30 @@
{ } /* end */
};
+static int ad1884a_mobile_master_sw_put(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
+ int ret = snd_hda_mixer_amp_switch_put(kcontrol, ucontrol);
+ int mute = (!ucontrol->value.integer.value[0] &&
+ !ucontrol->value.integer.value[1]);
+ /* toggle GPIO1 according to the mute state */
+ snd_hda_codec_write(codec, 0x01, 0, AC_VERB_SET_GPIO_DATA,
+ mute ? 0x02 : 0x0);
+ return ret;
+}
+
static struct snd_kcontrol_new ad1884a_mobile_mixers[] = {
HDA_CODEC_VOLUME("Master Playback Volume", 0x21, 0x0, HDA_OUTPUT),
- HDA_CODEC_MUTE("Master Playback Switch", 0x21, 0x0, HDA_OUTPUT),
+ /*HDA_CODEC_MUTE("Master Playback Switch", 0x21, 0x0, HDA_OUTPUT),*/
+ {
+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+ .name = "Master Playback Switch",
+ .info = snd_hda_mixer_amp_switch_info,
+ .get = snd_hda_mixer_amp_switch_get,
+ .put = ad1884a_mobile_master_sw_put,
+ .private_value = HDA_COMPOSE_AMP_VAL(0x21, 3, 0, HDA_OUTPUT),
+ },
HDA_CODEC_VOLUME("PCM Playback Volume", 0x20, 0x5, HDA_INPUT),
HDA_CODEC_MUTE("PCM Playback Switch", 0x20, 0x5, HDA_INPUT),
HDA_CODEC_VOLUME("Mic Capture Volume", 0x14, 0x0, HDA_INPUT),
@@ -3857,6 +3890,10 @@
/* unsolicited event for pin-sense */
{0x11, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | AD1884A_HP_EVENT},
{0x14, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | AD1884A_MIC_EVENT},
+ /* allow to touch GPIO1 (for mute control) */
+ {0x01, AC_VERB_SET_GPIO_MASK, 0x02},
+ {0x01, AC_VERB_SET_GPIO_DIRECTION, 0x02},
+ {0x01, AC_VERB_SET_GPIO_DATA, 0x02}, /* first muted */
{ } /* end */
};
@@ -3966,6 +4003,7 @@
SND_PCI_QUIRK(0x103c, 0x3037, "HP 2230s", AD1884A_LAPTOP),
SND_PCI_QUIRK(0x103c, 0x3056, "HP", AD1884A_MOBILE),
SND_PCI_QUIRK_MASK(0x103c, 0xfff0, 0x3070, "HP", AD1884A_MOBILE),
+ SND_PCI_QUIRK_MASK(0x103c, 0xfff0, 0x30d0, "HP laptop", AD1884A_LAPTOP),
SND_PCI_QUIRK_MASK(0x103c, 0xfff0, 0x30e0, "HP laptop", AD1884A_LAPTOP),
SND_PCI_QUIRK_MASK(0x103c, 0xff00, 0x3600, "HP laptop", AD1884A_LAPTOP),
SND_PCI_QUIRK(0x17aa, 0x20ac, "Thinkpad X300", AD1884A_THINKPAD),
diff --git a/sound/pci/hda/patch_ca0110.c b/sound/pci/hda/patch_ca0110.c
index 392d108..019ca7c 100644
--- a/sound/pci/hda/patch_ca0110.c
+++ b/sound/pci/hda/patch_ca0110.c
@@ -510,7 +510,7 @@
}
-int patch_ca0110(struct hda_codec *codec)
+static int patch_ca0110(struct hda_codec *codec)
{
struct ca0110_spec *spec;
int err;
diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
index 3345331..7e99763 100644
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -945,12 +945,13 @@
static void alc_automute_pin(struct hda_codec *codec)
{
struct alc_spec *spec = codec->spec;
- unsigned int present;
+ unsigned int present, pincap;
unsigned int nid = spec->autocfg.hp_pins[0];
int i;
- /* need to execute and sync at first */
- snd_hda_codec_read(codec, nid, 0, AC_VERB_SET_PIN_SENSE, 0);
+ pincap = snd_hda_query_pin_caps(codec, nid);
+ if (pincap & AC_PINCAP_TRIG_REQ) /* need trigger? */
+ snd_hda_codec_read(codec, nid, 0, AC_VERB_SET_PIN_SENSE, 0);
present = snd_hda_codec_read(codec, nid, 0,
AC_VERB_GET_PIN_SENSE, 0);
spec->jack_present = (present & AC_PINSENSE_PRESENCE) != 0;
@@ -1392,7 +1393,7 @@
static void alc_automute_amp(struct hda_codec *codec)
{
struct alc_spec *spec = codec->spec;
- unsigned int val, mute;
+ unsigned int val, mute, pincap;
hda_nid_t nid;
int i;
@@ -1401,6 +1402,10 @@
nid = spec->autocfg.hp_pins[i];
if (!nid)
break;
+ pincap = snd_hda_query_pin_caps(codec, nid);
+ if (pincap & AC_PINCAP_TRIG_REQ) /* need trigger? */
+ snd_hda_codec_read(codec, nid, 0,
+ AC_VERB_SET_PIN_SENSE, 0);
val = snd_hda_codec_read(codec, nid, 0,
AC_VERB_GET_PIN_SENSE, 0);
if (val & AC_PINSENSE_PRESENCE) {
@@ -1471,6 +1476,10 @@
static struct hda_verb alc888_acer_aspire_6530g_verbs[] = {
/* Bias voltage on for external mic port */
{0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN | PIN_VREF80},
+/* Front Mic: set to PIN_IN (empty by default) */
+ {0x12, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
+/* Unselect Front Mic by default in input mixer 3 */
+ {0x22, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0xb)},
/* Enable unsolicited event for HP jack */
{0x15, AC_VERB_SET_UNSOLICITED_ENABLE, ALC880_HP_EVENT | AC_USRSP_EN},
/* Enable speaker output */
@@ -1560,18 +1569,22 @@
static struct hda_input_mux alc888_acer_aspire_6530_sources[2] = {
/* Interal mic only available on one ADC */
{
- .num_items = 3,
+ .num_items = 5,
.items = {
{ "Ext Mic", 0x0 },
+ { "Line In", 0x2 },
{ "CD", 0x4 },
+ { "Input Mix", 0xa },
{ "Int Mic", 0xb },
},
},
{
- .num_items = 2,
+ .num_items = 4,
.items = {
{ "Ext Mic", 0x0 },
+ { "Line In", 0x2 },
{ "CD", 0x4 },
+ { "Input Mix", 0xa },
},
}
};
@@ -1639,6 +1652,17 @@
alc_automute_amp(codec);
}
+static void alc888_acer_aspire_6530g_init_hook(struct hda_codec *codec)
+{
+ struct alc_spec *spec = codec->spec;
+
+ spec->autocfg.hp_pins[0] = 0x15;
+ spec->autocfg.speaker_pins[0] = 0x14;
+ spec->autocfg.speaker_pins[1] = 0x16;
+ spec->autocfg.speaker_pins[2] = 0x17;
+ alc_automute_amp(codec);
+}
+
static void alc889_acer_aspire_8930g_init_hook(struct hda_codec *codec)
{
struct alc_spec *spec = codec->spec;
@@ -4481,6 +4505,12 @@
&dig_nid, 1);
if (err < 0)
continue;
+ if (dig_nid > 0x7f) {
+ printk(KERN_ERR "alc880_auto: invalid dig_nid "
+ "connection 0x%x for NID 0x%x\n", dig_nid,
+ spec->autocfg.dig_out_pins[i]);
+ continue;
+ }
if (!i)
spec->multiout.dig_out_nid = dig_nid;
else {
@@ -6895,9 +6925,6 @@
{0x1b, AC_VERB_SET_CONNECT_SEL, 0x00}, /* HP */
{0x14, AC_VERB_SET_UNSOLICITED_ENABLE, ALC880_HP_EVENT | AC_USRSP_EN},
- {0x01, AC_VERB_SET_GPIO_MASK, 0x03},
- {0x01, AC_VERB_SET_GPIO_DIRECTION, 0x03},
- {0x01, AC_VERB_SET_GPIO_DATA, 0x03},
{ } /* end */
};
@@ -7217,7 +7244,8 @@
},
[ALC882_TARGA] = {
.mixers = { alc882_targa_mixer, alc882_chmode_mixer },
- .init_verbs = { alc882_init_verbs, alc882_targa_verbs},
+ .init_verbs = { alc882_init_verbs, alc880_gpio3_init_verbs,
+ alc882_targa_verbs},
.num_dacs = ARRAY_SIZE(alc882_dac_nids),
.dac_nids = alc882_dac_nids,
.dig_out_nid = ALC882_DIGOUT_NID,
@@ -8189,6 +8217,8 @@
HDA_BIND_MUTE("Front Playback Switch", 0x0c, 2, HDA_INPUT),
HDA_CODEC_VOLUME("LFE Playback Volume", 0x0f, 0x0, HDA_OUTPUT),
HDA_BIND_MUTE("LFE Playback Switch", 0x0f, 2, HDA_INPUT),
+ HDA_CODEC_VOLUME("Line Playback Volume", 0x0b, 0x02, HDA_INPUT),
+ HDA_CODEC_MUTE("Line Playback Switch", 0x0b, 0x02, HDA_INPUT),
HDA_CODEC_VOLUME("CD Playback Volume", 0x0b, 0x04, HDA_INPUT),
HDA_CODEC_MUTE("CD Playback Switch", 0x0b, 0x04, HDA_INPUT),
HDA_CODEC_VOLUME("Mic Playback Volume", 0x0b, 0x0, HDA_INPUT),
@@ -9064,7 +9094,7 @@
SND_PCI_QUIRK(0x1025, 0x0157, "Acer X3200", ALC883_AUTO),
SND_PCI_QUIRK(0x1025, 0x0158, "Acer AX1700-U3700A", ALC883_AUTO),
SND_PCI_QUIRK(0x1025, 0x015e, "Acer Aspire 6930G",
- ALC888_ACER_ASPIRE_4930G),
+ ALC888_ACER_ASPIRE_6530G),
SND_PCI_QUIRK(0x1025, 0x0166, "Acer Aspire 6530G",
ALC888_ACER_ASPIRE_6530G),
/* default Acer -- disabled as it causes more problems.
@@ -9212,7 +9242,8 @@
},
[ALC883_TARGA_DIG] = {
.mixers = { alc883_targa_mixer, alc883_chmode_mixer },
- .init_verbs = { alc883_init_verbs, alc883_targa_verbs},
+ .init_verbs = { alc883_init_verbs, alc880_gpio3_init_verbs,
+ alc883_targa_verbs},
.num_dacs = ARRAY_SIZE(alc883_dac_nids),
.dac_nids = alc883_dac_nids,
.dig_out_nid = ALC883_DIGOUT_NID,
@@ -9225,7 +9256,8 @@
},
[ALC883_TARGA_2ch_DIG] = {
.mixers = { alc883_targa_2ch_mixer},
- .init_verbs = { alc883_init_verbs, alc883_targa_verbs},
+ .init_verbs = { alc883_init_verbs, alc880_gpio3_init_verbs,
+ alc883_targa_verbs},
.num_dacs = ARRAY_SIZE(alc883_dac_nids),
.dac_nids = alc883_dac_nids,
.adc_nids = alc883_adc_nids_alt,
@@ -9317,7 +9349,7 @@
ARRAY_SIZE(alc888_2_capture_sources),
.input_mux = alc888_acer_aspire_6530_sources,
.unsol_event = alc_automute_amp_unsol_event,
- .init_hook = alc888_acer_aspire_4930g_init_hook,
+ .init_hook = alc888_acer_aspire_6530g_init_hook,
},
[ALC888_ACER_ASPIRE_8930G] = {
.mixers = { alc888_base_mixer,
@@ -12437,6 +12469,8 @@
if (err < 0)
return err;
+ alc_ssid_check(codec, 0x15, 0x1b, 0x14);
+
return 1;
}
@@ -12848,20 +12882,11 @@
{ }
};
-/* bind volumes of both NID 0x0c and 0x0d */
-static struct hda_bind_ctls alc269_epc_bind_vol = {
- .ops = &snd_hda_bind_vol,
- .values = {
- HDA_COMPOSE_AMP_VAL(0x02, 3, 0, HDA_OUTPUT),
- HDA_COMPOSE_AMP_VAL(0x03, 3, 0, HDA_OUTPUT),
- 0
- },
-};
-
static struct snd_kcontrol_new alc269_eeepc_mixer[] = {
- HDA_CODEC_MUTE("iSpeaker Playback Switch", 0x14, 0x0, HDA_OUTPUT),
- HDA_BIND_VOL("LineOut Playback Volume", &alc269_epc_bind_vol),
- HDA_CODEC_MUTE("LineOut Playback Switch", 0x15, 0x0, HDA_OUTPUT),
+ HDA_CODEC_MUTE("Speaker Playback Switch", 0x14, 0x0, HDA_OUTPUT),
+ HDA_CODEC_VOLUME("Speaker Playback Volume", 0x02, 0x0, HDA_OUTPUT),
+ HDA_CODEC_MUTE("Headphone Playback Switch", 0x15, 0x0, HDA_OUTPUT),
+ HDA_CODEC_VOLUME("Headphone Playback Volume", 0x03, 0x0, HDA_OUTPUT),
{ } /* end */
};
@@ -12874,12 +12899,7 @@
};
/* FSC amilo */
-static struct snd_kcontrol_new alc269_fujitsu_mixer[] = {
- HDA_CODEC_MUTE("Speaker Playback Switch", 0x14, 0x0, HDA_OUTPUT),
- HDA_CODEC_MUTE("Headphone Playback Switch", 0x15, 0x0, HDA_OUTPUT),
- HDA_BIND_VOL("PCM Playback Volume", &alc269_epc_bind_vol),
- { } /* end */
-};
+#define alc269_fujitsu_mixer alc269_eeepc_mixer
static struct hda_verb alc269_quanta_fl1_verbs[] = {
{0x15, AC_VERB_SET_CONNECT_SEL, 0x01},
@@ -13345,6 +13365,8 @@
if (!spec->cap_mixer && !spec->no_analog)
set_capture_mixer(spec);
+ alc_ssid_check(codec, 0x15, 0x1b, 0x14);
+
return 1;
}
diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c
index 14f3c3e..41b5b3a 100644
--- a/sound/pci/hda/patch_sigmatel.c
+++ b/sound/pci/hda/patch_sigmatel.c
@@ -1590,8 +1590,6 @@
/* SigmaTel reference board */
SND_PCI_QUIRK(PCI_VENDOR_ID_INTEL, 0x2668,
"DFI LanParty", STAC_REF),
- SND_PCI_QUIRK(PCI_VENDOR_ID_INTEL, 0xfb30,
- "SigmaTel",STAC_9205_REF),
SND_PCI_QUIRK(PCI_VENDOR_ID_DFI, 0x3101,
"DFI LanParty", STAC_REF),
/* Dell laptops have BIOS problem */
@@ -2344,6 +2342,8 @@
/* SigmaTel reference board */
SND_PCI_QUIRK(PCI_VENDOR_ID_INTEL, 0x2668,
"DFI LanParty", STAC_9205_REF),
+ SND_PCI_QUIRK(PCI_VENDOR_ID_INTEL, 0xfb30,
+ "SigmaTel", STAC_9205_REF),
SND_PCI_QUIRK(PCI_VENDOR_ID_DFI, 0x3101,
"DFI LanParty", STAC_9205_REF),
/* Dell */
diff --git a/sound/pci/hda/patch_via.c b/sound/pci/hda/patch_via.c
index 8e004fb..9008b4b 100644
--- a/sound/pci/hda/patch_via.c
+++ b/sound/pci/hda/patch_via.c
@@ -210,7 +210,9 @@
/* capture */
unsigned int num_adc_nids;
hda_nid_t *adc_nids;
+ hda_nid_t mux_nids[3];
hda_nid_t dig_in_nid;
+ hda_nid_t dig_in_pin;
/* capture source */
const struct hda_input_mux *input_mux;
@@ -319,6 +321,9 @@
pin_type);
snd_hda_codec_write(codec, nid, 0, AC_VERB_SET_AMP_GAIN_MUTE,
AMP_OUT_UNMUTE);
+ if (snd_hda_query_pin_caps(codec, nid) & AC_PINCAP_EAPD)
+ snd_hda_codec_write(codec, nid, 0,
+ AC_VERB_SET_EAPD_BTLENABLE, 0x02);
}
@@ -387,27 +392,12 @@
struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
struct via_spec *spec = codec->spec;
unsigned int adc_idx = snd_ctl_get_ioffidx(kcontrol, &ucontrol->id);
- unsigned int vendor_id = codec->vendor_id;
- /* AIW0 lydia 060801 add for correct sw0 input select */
- if (IS_VT1708_VENDORID(vendor_id) && (adc_idx == 0))
- return snd_hda_input_mux_put(codec, spec->input_mux, ucontrol,
- 0x18, &spec->cur_mux[adc_idx]);
- else if ((IS_VT1709_10CH_VENDORID(vendor_id) ||
- IS_VT1709_6CH_VENDORID(vendor_id)) && (adc_idx == 0))
- return snd_hda_input_mux_put(codec, spec->input_mux, ucontrol,
- 0x19, &spec->cur_mux[adc_idx]);
- else if ((IS_VT1708B_8CH_VENDORID(vendor_id) ||
- IS_VT1708B_4CH_VENDORID(vendor_id)) && (adc_idx == 0))
- return snd_hda_input_mux_put(codec, spec->input_mux, ucontrol,
- 0x17, &spec->cur_mux[adc_idx]);
- else if (IS_VT1702_VENDORID(vendor_id) && (adc_idx == 0))
- return snd_hda_input_mux_put(codec, spec->input_mux, ucontrol,
- 0x13, &spec->cur_mux[adc_idx]);
- else
- return snd_hda_input_mux_put(codec, spec->input_mux, ucontrol,
- spec->adc_nids[adc_idx],
- &spec->cur_mux[adc_idx]);
+ if (!spec->mux_nids[adc_idx])
+ return -EINVAL;
+ return snd_hda_input_mux_put(codec, spec->input_mux, ucontrol,
+ spec->mux_nids[adc_idx],
+ &spec->cur_mux[adc_idx]);
}
static int via_independent_hp_info(struct snd_kcontrol *kcontrol,
@@ -998,25 +988,11 @@
/* Lydia Add for EAPD enable */
if (!spec->dig_in_nid) { /* No Digital In connection */
- if (IS_VT1708_VENDORID(codec->vendor_id)) {
- snd_hda_codec_write(codec, VT1708_DIGIN_PIN, 0,
+ if (spec->dig_in_pin) {
+ snd_hda_codec_write(codec, spec->dig_in_pin, 0,
AC_VERB_SET_PIN_WIDGET_CONTROL,
PIN_OUT);
- snd_hda_codec_write(codec, VT1708_DIGIN_PIN, 0,
- AC_VERB_SET_EAPD_BTLENABLE, 0x02);
- } else if (IS_VT1709_10CH_VENDORID(codec->vendor_id) ||
- IS_VT1709_6CH_VENDORID(codec->vendor_id)) {
- snd_hda_codec_write(codec, VT1709_DIGIN_PIN, 0,
- AC_VERB_SET_PIN_WIDGET_CONTROL,
- PIN_OUT);
- snd_hda_codec_write(codec, VT1709_DIGIN_PIN, 0,
- AC_VERB_SET_EAPD_BTLENABLE, 0x02);
- } else if (IS_VT1708B_8CH_VENDORID(codec->vendor_id) ||
- IS_VT1708B_4CH_VENDORID(codec->vendor_id)) {
- snd_hda_codec_write(codec, VT1708B_DIGIN_PIN, 0,
- AC_VERB_SET_PIN_WIDGET_CONTROL,
- PIN_OUT);
- snd_hda_codec_write(codec, VT1708B_DIGIN_PIN, 0,
+ snd_hda_codec_write(codec, spec->dig_in_pin, 0,
AC_VERB_SET_EAPD_BTLENABLE, 0x02);
}
} else /* enable SPDIF-input pin */
@@ -1326,6 +1302,7 @@
if (spec->autocfg.dig_outs)
spec->multiout.dig_out_nid = VT1708_DIGOUT_NID;
+ spec->dig_in_pin = VT1708_DIGIN_PIN;
if (spec->autocfg.dig_in_pin)
spec->dig_in_nid = VT1708_DIGIN_NID;
@@ -1352,6 +1329,34 @@
return 0;
}
+static int get_mux_nids(struct hda_codec *codec)
+{
+ struct via_spec *spec = codec->spec;
+ hda_nid_t nid, conn[8];
+ unsigned int type;
+ int i, n;
+
+ for (i = 0; i < spec->num_adc_nids; i++) {
+ nid = spec->adc_nids[i];
+ while (nid) {
+ type = (get_wcaps(codec, nid) & AC_WCAP_TYPE)
+ >> AC_WCAP_TYPE_SHIFT;
+ if (type == AC_WID_PIN)
+ break;
+ n = snd_hda_get_connections(codec, nid, conn,
+ ARRAY_SIZE(conn));
+ if (n <= 0)
+ break;
+ if (n > 1) {
+ spec->mux_nids[i] = nid;
+ break;
+ }
+ nid = conn[0];
+ }
+ }
+ return 0;
+}
+
static int patch_vt1708(struct hda_codec *codec)
{
struct via_spec *spec;
@@ -1799,6 +1804,7 @@
if (spec->autocfg.dig_outs)
spec->multiout.dig_out_nid = VT1709_DIGOUT_NID;
+ spec->dig_in_pin = VT1709_DIGIN_PIN;
if (spec->autocfg.dig_in_pin)
spec->dig_in_nid = VT1709_DIGIN_NID;
@@ -1859,6 +1865,7 @@
if (!spec->adc_nids && spec->input_mux) {
spec->adc_nids = vt1709_adc_nids;
spec->num_adc_nids = ARRAY_SIZE(vt1709_adc_nids);
+ get_mux_nids(codec);
spec->mixers[spec->num_mixers] = vt1709_capture_mixer;
spec->num_mixers++;
}
@@ -1952,6 +1959,7 @@
if (!spec->adc_nids && spec->input_mux) {
spec->adc_nids = vt1709_adc_nids;
spec->num_adc_nids = ARRAY_SIZE(vt1709_adc_nids);
+ get_mux_nids(codec);
spec->mixers[spec->num_mixers] = vt1709_capture_mixer;
spec->num_mixers++;
}
@@ -2344,6 +2352,7 @@
if (spec->autocfg.dig_outs)
spec->multiout.dig_out_nid = VT1708B_DIGOUT_NID;
+ spec->dig_in_pin = VT1708B_DIGIN_PIN;
if (spec->autocfg.dig_in_pin)
spec->dig_in_nid = VT1708B_DIGIN_NID;
@@ -2404,6 +2413,7 @@
if (!spec->adc_nids && spec->input_mux) {
spec->adc_nids = vt1708B_adc_nids;
spec->num_adc_nids = ARRAY_SIZE(vt1708B_adc_nids);
+ get_mux_nids(codec);
spec->mixers[spec->num_mixers] = vt1708B_capture_mixer;
spec->num_mixers++;
}
@@ -2455,6 +2465,7 @@
if (!spec->adc_nids && spec->input_mux) {
spec->adc_nids = vt1708B_adc_nids;
spec->num_adc_nids = ARRAY_SIZE(vt1708B_adc_nids);
+ get_mux_nids(codec);
spec->mixers[spec->num_mixers] = vt1708B_capture_mixer;
spec->num_mixers++;
}
@@ -2889,6 +2900,7 @@
if (!spec->adc_nids && spec->input_mux) {
spec->adc_nids = vt1708S_adc_nids;
spec->num_adc_nids = ARRAY_SIZE(vt1708S_adc_nids);
+ get_mux_nids(codec);
spec->mixers[spec->num_mixers] = vt1708S_capture_mixer;
spec->num_mixers++;
}
@@ -3206,6 +3218,7 @@
if (!spec->adc_nids && spec->input_mux) {
spec->adc_nids = vt1702_adc_nids;
spec->num_adc_nids = ARRAY_SIZE(vt1702_adc_nids);
+ get_mux_nids(codec);
spec->mixers[spec->num_mixers] = vt1702_capture_mixer;
spec->num_mixers++;
}
diff --git a/sound/pci/ice1712/ice1712.c b/sound/pci/ice1712/ice1712.c
index 0d0cdbd..cecf1ff 100644
--- a/sound/pci/ice1712/ice1712.c
+++ b/sound/pci/ice1712/ice1712.c
@@ -107,7 +107,7 @@
static const struct pci_device_id snd_ice1712_ids[] = {
- { PCI_VENDOR_ID_ICE, PCI_DEVICE_ID_ICE_1712, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, /* ICE1712 */
+ { PCI_VDEVICE(ICE, PCI_DEVICE_ID_ICE_1712), 0 }, /* ICE1712 */
{ 0, }
};
diff --git a/sound/pci/ice1712/ice1724.c b/sound/pci/ice1712/ice1724.c
index 36ade77..cc84a83 100644
--- a/sound/pci/ice1712/ice1724.c
+++ b/sound/pci/ice1712/ice1724.c
@@ -93,7 +93,7 @@
/* Both VT1720 and VT1724 have the same PCI IDs */
static const struct pci_device_id snd_vt1724_ids[] = {
- { PCI_VENDOR_ID_ICE, PCI_DEVICE_ID_VT1724, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
+ { PCI_VDEVICE(ICE, PCI_DEVICE_ID_VT1724), 0 },
{ 0, }
};
diff --git a/sound/pci/intel8x0.c b/sound/pci/intel8x0.c
index 8aa5687..171ada5 100644
--- a/sound/pci/intel8x0.c
+++ b/sound/pci/intel8x0.c
@@ -421,29 +421,29 @@
};
static struct pci_device_id snd_intel8x0_ids[] = {
- { 0x8086, 0x2415, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DEVICE_INTEL }, /* 82801AA */
- { 0x8086, 0x2425, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DEVICE_INTEL }, /* 82901AB */
- { 0x8086, 0x2445, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DEVICE_INTEL }, /* 82801BA */
- { 0x8086, 0x2485, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DEVICE_INTEL }, /* ICH3 */
- { 0x8086, 0x24c5, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DEVICE_INTEL_ICH4 }, /* ICH4 */
- { 0x8086, 0x24d5, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DEVICE_INTEL_ICH4 }, /* ICH5 */
- { 0x8086, 0x25a6, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DEVICE_INTEL_ICH4 }, /* ESB */
- { 0x8086, 0x266e, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DEVICE_INTEL_ICH4 }, /* ICH6 */
- { 0x8086, 0x27de, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DEVICE_INTEL_ICH4 }, /* ICH7 */
- { 0x8086, 0x2698, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DEVICE_INTEL_ICH4 }, /* ESB2 */
- { 0x8086, 0x7195, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DEVICE_INTEL }, /* 440MX */
- { 0x1039, 0x7012, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DEVICE_SIS }, /* SI7012 */
- { 0x10de, 0x01b1, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DEVICE_NFORCE }, /* NFORCE */
- { 0x10de, 0x003a, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DEVICE_NFORCE }, /* MCP04 */
- { 0x10de, 0x006a, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DEVICE_NFORCE }, /* NFORCE2 */
- { 0x10de, 0x0059, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DEVICE_NFORCE }, /* CK804 */
- { 0x10de, 0x008a, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DEVICE_NFORCE }, /* CK8 */
- { 0x10de, 0x00da, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DEVICE_NFORCE }, /* NFORCE3 */
- { 0x10de, 0x00ea, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DEVICE_NFORCE }, /* CK8S */
- { 0x10de, 0x026b, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DEVICE_NFORCE }, /* MCP51 */
- { 0x1022, 0x746d, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DEVICE_INTEL }, /* AMD8111 */
- { 0x1022, 0x7445, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DEVICE_INTEL }, /* AMD768 */
- { 0x10b9, 0x5455, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DEVICE_ALI }, /* Ali5455 */
+ { PCI_VDEVICE(INTEL, 0x2415), DEVICE_INTEL }, /* 82801AA */
+ { PCI_VDEVICE(INTEL, 0x2425), DEVICE_INTEL }, /* 82901AB */
+ { PCI_VDEVICE(INTEL, 0x2445), DEVICE_INTEL }, /* 82801BA */
+ { PCI_VDEVICE(INTEL, 0x2485), DEVICE_INTEL }, /* ICH3 */
+ { PCI_VDEVICE(INTEL, 0x24c5), DEVICE_INTEL_ICH4 }, /* ICH4 */
+ { PCI_VDEVICE(INTEL, 0x24d5), DEVICE_INTEL_ICH4 }, /* ICH5 */
+ { PCI_VDEVICE(INTEL, 0x25a6), DEVICE_INTEL_ICH4 }, /* ESB */
+ { PCI_VDEVICE(INTEL, 0x266e), DEVICE_INTEL_ICH4 }, /* ICH6 */
+ { PCI_VDEVICE(INTEL, 0x27de), DEVICE_INTEL_ICH4 }, /* ICH7 */
+ { PCI_VDEVICE(INTEL, 0x2698), DEVICE_INTEL_ICH4 }, /* ESB2 */
+ { PCI_VDEVICE(INTEL, 0x7195), DEVICE_INTEL }, /* 440MX */
+ { PCI_VDEVICE(SI, 0x7012), DEVICE_SIS }, /* SI7012 */
+ { PCI_VDEVICE(NVIDIA, 0x01b1), DEVICE_NFORCE }, /* NFORCE */
+ { PCI_VDEVICE(NVIDIA, 0x003a), DEVICE_NFORCE }, /* MCP04 */
+ { PCI_VDEVICE(NVIDIA, 0x006a), DEVICE_NFORCE }, /* NFORCE2 */
+ { PCI_VDEVICE(NVIDIA, 0x0059), DEVICE_NFORCE }, /* CK804 */
+ { PCI_VDEVICE(NVIDIA, 0x008a), DEVICE_NFORCE }, /* CK8 */
+ { PCI_VDEVICE(NVIDIA, 0x00da), DEVICE_NFORCE }, /* NFORCE3 */
+ { PCI_VDEVICE(NVIDIA, 0x00ea), DEVICE_NFORCE }, /* CK8S */
+ { PCI_VDEVICE(NVIDIA, 0x026b), DEVICE_NFORCE }, /* MCP51 */
+ { PCI_VDEVICE(AMD, 0x746d), DEVICE_INTEL }, /* AMD8111 */
+ { PCI_VDEVICE(AMD, 0x7445), DEVICE_INTEL }, /* AMD768 */
+ { PCI_VDEVICE(AL, 0x5455), DEVICE_ALI }, /* Ali5455 */
{ 0, }
};
diff --git a/sound/pci/intel8x0m.c b/sound/pci/intel8x0m.c
index 6ec0fc5..9e7d12e 100644
--- a/sound/pci/intel8x0m.c
+++ b/sound/pci/intel8x0m.c
@@ -220,24 +220,24 @@
};
static struct pci_device_id snd_intel8x0m_ids[] = {
- { 0x8086, 0x2416, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DEVICE_INTEL }, /* 82801AA */
- { 0x8086, 0x2426, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DEVICE_INTEL }, /* 82901AB */
- { 0x8086, 0x2446, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DEVICE_INTEL }, /* 82801BA */
- { 0x8086, 0x2486, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DEVICE_INTEL }, /* ICH3 */
- { 0x8086, 0x24c6, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DEVICE_INTEL }, /* ICH4 */
- { 0x8086, 0x24d6, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DEVICE_INTEL }, /* ICH5 */
- { 0x8086, 0x266d, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DEVICE_INTEL }, /* ICH6 */
- { 0x8086, 0x27dd, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DEVICE_INTEL }, /* ICH7 */
- { 0x8086, 0x7196, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DEVICE_INTEL }, /* 440MX */
- { 0x1022, 0x7446, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DEVICE_INTEL }, /* AMD768 */
- { 0x1039, 0x7013, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DEVICE_SIS }, /* SI7013 */
- { 0x10de, 0x01c1, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DEVICE_NFORCE }, /* NFORCE */
- { 0x10de, 0x0069, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DEVICE_NFORCE }, /* NFORCE2 */
- { 0x10de, 0x0089, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DEVICE_NFORCE }, /* NFORCE2s */
- { 0x10de, 0x00d9, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DEVICE_NFORCE }, /* NFORCE3 */
+ { PCI_VDEVICE(INTEL, 0x2416), DEVICE_INTEL }, /* 82801AA */
+ { PCI_VDEVICE(INTEL, 0x2426), DEVICE_INTEL }, /* 82901AB */
+ { PCI_VDEVICE(INTEL, 0x2446), DEVICE_INTEL }, /* 82801BA */
+ { PCI_VDEVICE(INTEL, 0x2486), DEVICE_INTEL }, /* ICH3 */
+ { PCI_VDEVICE(INTEL, 0x24c6), DEVICE_INTEL }, /* ICH4 */
+ { PCI_VDEVICE(INTEL, 0x24d6), DEVICE_INTEL }, /* ICH5 */
+ { PCI_VDEVICE(INTEL, 0x266d), DEVICE_INTEL }, /* ICH6 */
+ { PCI_VDEVICE(INTEL, 0x27dd), DEVICE_INTEL }, /* ICH7 */
+ { PCI_VDEVICE(INTEL, 0x7196), DEVICE_INTEL }, /* 440MX */
+ { PCI_VDEVICE(AMD, 0x7446), DEVICE_INTEL }, /* AMD768 */
+ { PCI_VDEVICE(SI, 0x7013), DEVICE_SIS }, /* SI7013 */
+ { PCI_VDEVICE(NVIDIA, 0x01c1), DEVICE_NFORCE }, /* NFORCE */
+ { PCI_VDEVICE(NVIDIA, 0x0069), DEVICE_NFORCE }, /* NFORCE2 */
+ { PCI_VDEVICE(NVIDIA, 0x0089), DEVICE_NFORCE }, /* NFORCE2s */
+ { PCI_VDEVICE(NVIDIA, 0x00d9), DEVICE_NFORCE }, /* NFORCE3 */
#if 0
- { 0x1022, 0x746d, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DEVICE_INTEL }, /* AMD8111 */
- { 0x10b9, 0x5455, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DEVICE_ALI }, /* Ali5455 */
+ { PCI_VDEVICE(AMD, 0x746d), DEVICE_INTEL }, /* AMD8111 */
+ { PCI_VDEVICE(AL, 0x5455), DEVICE_ALI }, /* Ali5455 */
#endif
{ 0, }
};
diff --git a/sound/pci/lx6464es/lx6464es.c b/sound/pci/lx6464es/lx6464es.c
index 18da2ef..11b8c65 100644
--- a/sound/pci/lx6464es/lx6464es.c
+++ b/sound/pci/lx6464es/lx6464es.c
@@ -654,13 +654,12 @@
int i;
u32 orig_conf_es = lx_dsp_reg_read(chip, eReg_CONFES);
- u32 default_conf_es = (64 << IOCR_OUTPUTS_OFFSET) |
+ /* configure 64 io channels */
+ u32 conf_es = (orig_conf_es & CONFES_READ_PART_MASK) |
(64 << IOCR_INPUTS_OFFSET) |
+ (64 << IOCR_OUTPUTS_OFFSET) |
(FREQ_RATIO_SINGLE_MODE << FREQ_RATIO_OFFSET);
- u32 conf_es = (orig_conf_es & CONFES_READ_PART_MASK)
- | (default_conf_es & CONFES_WRITE_PART_MASK);
-
snd_printdd("->lx_init_ethersound\n");
chip->freq_ratio = FREQ_RATIO_SINGLE_MODE;
diff --git a/sound/pci/mixart/mixart.c b/sound/pci/mixart/mixart.c
index 82bc5b9e..a83d196 100644
--- a/sound/pci/mixart/mixart.c
+++ b/sound/pci/mixart/mixart.c
@@ -61,7 +61,7 @@
*/
static struct pci_device_id snd_mixart_ids[] = {
- { 0x1057, 0x0003, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0, }, /* MC8240 */
+ { PCI_VDEVICE(MOTOROLA, 0x0003), 0, }, /* MC8240 */
{ 0, }
};
diff --git a/sound/pci/nm256/nm256.c b/sound/pci/nm256/nm256.c
index 522a040..97a0731 100644
--- a/sound/pci/nm256/nm256.c
+++ b/sound/pci/nm256/nm256.c
@@ -263,9 +263,9 @@
* PCI ids
*/
static struct pci_device_id snd_nm256_ids[] = {
- {PCI_VENDOR_ID_NEOMAGIC, PCI_DEVICE_ID_NEOMAGIC_NM256AV_AUDIO, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
- {PCI_VENDOR_ID_NEOMAGIC, PCI_DEVICE_ID_NEOMAGIC_NM256ZX_AUDIO, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
- {PCI_VENDOR_ID_NEOMAGIC, PCI_DEVICE_ID_NEOMAGIC_NM256XL_PLUS_AUDIO, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
+ {PCI_VDEVICE(NEOMAGIC, PCI_DEVICE_ID_NEOMAGIC_NM256AV_AUDIO), 0},
+ {PCI_VDEVICE(NEOMAGIC, PCI_DEVICE_ID_NEOMAGIC_NM256ZX_AUDIO), 0},
+ {PCI_VDEVICE(NEOMAGIC, PCI_DEVICE_ID_NEOMAGIC_NM256XL_PLUS_AUDIO), 0},
{0,},
};
diff --git a/sound/pci/oxygen/oxygen_mixer.c b/sound/pci/oxygen/oxygen_mixer.c
index 304da16..5401c54 100644
--- a/sound/pci/oxygen/oxygen_mixer.c
+++ b/sound/pci/oxygen/oxygen_mixer.c
@@ -575,8 +575,10 @@
static int ac97_volume_info(struct snd_kcontrol *ctl,
struct snd_ctl_elem_info *info)
{
+ int stereo = (ctl->private_value >> 16) & 1;
+
info->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
- info->count = 2;
+ info->count = stereo ? 2 : 1;
info->value.integer.min = 0;
info->value.integer.max = 0x1f;
return 0;
@@ -587,6 +589,7 @@
{
struct oxygen *chip = ctl->private_data;
unsigned int codec = (ctl->private_value >> 24) & 1;
+ int stereo = (ctl->private_value >> 16) & 1;
unsigned int index = ctl->private_value & 0xff;
u16 reg;
@@ -594,7 +597,8 @@
reg = oxygen_read_ac97(chip, codec, index);
mutex_unlock(&chip->mutex);
value->value.integer.value[0] = 31 - (reg & 0x1f);
- value->value.integer.value[1] = 31 - ((reg >> 8) & 0x1f);
+ if (stereo)
+ value->value.integer.value[1] = 31 - ((reg >> 8) & 0x1f);
return 0;
}
@@ -603,6 +607,7 @@
{
struct oxygen *chip = ctl->private_data;
unsigned int codec = (ctl->private_value >> 24) & 1;
+ int stereo = (ctl->private_value >> 16) & 1;
unsigned int index = ctl->private_value & 0xff;
u16 oldreg, newreg;
int change;
@@ -612,8 +617,11 @@
newreg = oldreg;
newreg = (newreg & ~0x1f) |
(31 - (value->value.integer.value[0] & 0x1f));
- newreg = (newreg & ~0x1f00) |
- ((31 - (value->value.integer.value[0] & 0x1f)) << 8);
+ if (stereo)
+ newreg = (newreg & ~0x1f00) |
+ ((31 - (value->value.integer.value[1] & 0x1f)) << 8);
+ else
+ newreg = (newreg & ~0x1f00) | ((newreg & 0x1f) << 8);
change = newreg != oldreg;
if (change)
oxygen_write_ac97(chip, codec, index, newreg);
@@ -673,7 +681,7 @@
.private_value = ((codec) << 24) | ((invert) << 16) | \
((bitnr) << 8) | (index), \
}
-#define AC97_VOLUME(xname, codec, index) { \
+#define AC97_VOLUME(xname, codec, index, stereo) { \
.iface = SNDRV_CTL_ELEM_IFACE_MIXER, \
.name = xname, \
.access = SNDRV_CTL_ELEM_ACCESS_READWRITE | \
@@ -682,7 +690,7 @@
.get = ac97_volume_get, \
.put = ac97_volume_put, \
.tlv = { .p = ac97_db_scale, }, \
- .private_value = ((codec) << 24) | (index), \
+ .private_value = ((codec) << 24) | ((stereo) << 16) | (index), \
}
static DECLARE_TLV_DB_SCALE(monitor_db_scale, -1000, 1000, 0);
@@ -882,18 +890,18 @@
};
static const struct snd_kcontrol_new ac97_controls[] = {
- AC97_VOLUME("Mic Capture Volume", 0, AC97_MIC),
+ AC97_VOLUME("Mic Capture Volume", 0, AC97_MIC, 0),
AC97_SWITCH("Mic Capture Switch", 0, AC97_MIC, 15, 1),
AC97_SWITCH("Mic Boost (+20dB)", 0, AC97_MIC, 6, 0),
AC97_SWITCH("Line Capture Switch", 0, AC97_LINE, 15, 1),
- AC97_VOLUME("CD Capture Volume", 0, AC97_CD),
+ AC97_VOLUME("CD Capture Volume", 0, AC97_CD, 1),
AC97_SWITCH("CD Capture Switch", 0, AC97_CD, 15, 1),
- AC97_VOLUME("Aux Capture Volume", 0, AC97_AUX),
+ AC97_VOLUME("Aux Capture Volume", 0, AC97_AUX, 1),
AC97_SWITCH("Aux Capture Switch", 0, AC97_AUX, 15, 1),
};
static const struct snd_kcontrol_new ac97_fp_controls[] = {
- AC97_VOLUME("Front Panel Playback Volume", 1, AC97_HEADPHONE),
+ AC97_VOLUME("Front Panel Playback Volume", 1, AC97_HEADPHONE, 1),
AC97_SWITCH("Front Panel Playback Switch", 1, AC97_HEADPHONE, 15, 1),
{
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
diff --git a/sound/pci/oxygen/virtuoso.c b/sound/pci/oxygen/virtuoso.c
index bf971f7..6ebcb6b 100644
--- a/sound/pci/oxygen/virtuoso.c
+++ b/sound/pci/oxygen/virtuoso.c
@@ -635,6 +635,8 @@
static void xonar_d1_resume(struct oxygen *chip)
{
+ oxygen_set_bits8(chip, OXYGEN_FUNCTION, OXYGEN_FUNCTION_RESET_CODEC);
+ msleep(1);
cs43xx_init(chip);
xonar_enable_output(chip);
}
diff --git a/sound/pci/rme32.c b/sound/pci/rme32.c
index d7b966e..f977dba 100644
--- a/sound/pci/rme32.c
+++ b/sound/pci/rme32.c
@@ -227,12 +227,9 @@
};
static struct pci_device_id snd_rme32_ids[] = {
- {PCI_VENDOR_ID_XILINX_RME, PCI_DEVICE_ID_RME_DIGI32,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0,},
- {PCI_VENDOR_ID_XILINX_RME, PCI_DEVICE_ID_RME_DIGI32_8,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0,},
- {PCI_VENDOR_ID_XILINX_RME, PCI_DEVICE_ID_RME_DIGI32_PRO,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0,},
+ {PCI_VDEVICE(XILINX_RME, PCI_DEVICE_ID_RME_DIGI32), 0,},
+ {PCI_VDEVICE(XILINX_RME, PCI_DEVICE_ID_RME_DIGI32_8), 0,},
+ {PCI_VDEVICE(XILINX_RME, PCI_DEVICE_ID_RME_DIGI32_PRO), 0,},
{0,}
};
diff --git a/sound/pci/rme96.c b/sound/pci/rme96.c
index 55fb1c1..2ba5c0f 100644
--- a/sound/pci/rme96.c
+++ b/sound/pci/rme96.c
@@ -232,14 +232,10 @@
};
static struct pci_device_id snd_rme96_ids[] = {
- { PCI_VENDOR_ID_XILINX, PCI_DEVICE_ID_RME_DIGI96,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0, },
- { PCI_VENDOR_ID_XILINX, PCI_DEVICE_ID_RME_DIGI96_8,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0, },
- { PCI_VENDOR_ID_XILINX, PCI_DEVICE_ID_RME_DIGI96_8_PRO,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0, },
- { PCI_VENDOR_ID_XILINX, PCI_DEVICE_ID_RME_DIGI96_8_PAD_OR_PST,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0, },
+ { PCI_VDEVICE(XILINX, PCI_DEVICE_ID_RME_DIGI96), 0, },
+ { PCI_VDEVICE(XILINX, PCI_DEVICE_ID_RME_DIGI96_8), 0, },
+ { PCI_VDEVICE(XILINX, PCI_DEVICE_ID_RME_DIGI96_8_PRO), 0, },
+ { PCI_VDEVICE(XILINX, PCI_DEVICE_ID_RME_DIGI96_8_PAD_OR_PST), 0, },
{ 0, }
};
diff --git a/sound/pci/sonicvibes.c b/sound/pci/sonicvibes.c
index 7dc60ad..1f6406c 100644
--- a/sound/pci/sonicvibes.c
+++ b/sound/pci/sonicvibes.c
@@ -243,7 +243,7 @@
};
static struct pci_device_id snd_sonic_ids[] = {
- { 0x5333, 0xca00, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0, },
+ { PCI_VDEVICE(S3, 0xca00), 0, },
{ 0, }
};
diff --git a/sound/pci/via82xx.c b/sound/pci/via82xx.c
index 949fcaf..acfa476 100644
--- a/sound/pci/via82xx.c
+++ b/sound/pci/via82xx.c
@@ -402,9 +402,9 @@
static struct pci_device_id snd_via82xx_ids[] = {
/* 0x1106, 0x3058 */
- { PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686_5, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TYPE_CARD_VIA686, }, /* 686A */
+ { PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_82C686_5), TYPE_CARD_VIA686, }, /* 686A */
/* 0x1106, 0x3059 */
- { PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8233_5, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TYPE_CARD_VIA8233, }, /* VT8233 */
+ { PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_8233_5), TYPE_CARD_VIA8233, }, /* VT8233 */
{ 0, }
};
diff --git a/sound/pci/via82xx_modem.c b/sound/pci/via82xx_modem.c
index 0d54e35..47eb615 100644
--- a/sound/pci/via82xx_modem.c
+++ b/sound/pci/via82xx_modem.c
@@ -261,7 +261,7 @@
};
static struct pci_device_id snd_via82xx_modem_ids[] = {
- { 0x1106, 0x3068, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TYPE_CARD_VIA82XX_MODEM, },
+ { PCI_VDEVICE(VIA, 0x3068), TYPE_CARD_VIA82XX_MODEM, },
{ 0, }
};
diff --git a/sound/pci/ymfpci/ymfpci.c b/sound/pci/ymfpci/ymfpci.c
index 4af6666..e6b18b9 100644
--- a/sound/pci/ymfpci/ymfpci.c
+++ b/sound/pci/ymfpci/ymfpci.c
@@ -67,12 +67,12 @@
MODULE_PARM_DESC(rear_switch, "Enable shared rear/line-in switch");
static struct pci_device_id snd_ymfpci_ids[] = {
- { 0x1073, 0x0004, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0, }, /* YMF724 */
- { 0x1073, 0x000d, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0, }, /* YMF724F */
- { 0x1073, 0x000a, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0, }, /* YMF740 */
- { 0x1073, 0x000c, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0, }, /* YMF740C */
- { 0x1073, 0x0010, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0, }, /* YMF744 */
- { 0x1073, 0x0012, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0, }, /* YMF754 */
+ { PCI_VDEVICE(YAMAHA, 0x0004), 0, }, /* YMF724 */
+ { PCI_VDEVICE(YAMAHA, 0x000d), 0, }, /* YMF724F */
+ { PCI_VDEVICE(YAMAHA, 0x000a), 0, }, /* YMF740 */
+ { PCI_VDEVICE(YAMAHA, 0x000c), 0, }, /* YMF740C */
+ { PCI_VDEVICE(YAMAHA, 0x0010), 0, }, /* YMF744 */
+ { PCI_VDEVICE(YAMAHA, 0x0012), 0, }, /* YMF754 */
{ 0, }
};
diff --git a/sound/soc/codecs/wm8753.c b/sound/soc/codecs/wm8753.c
index d28eeac..49c4b28 100644
--- a/sound/soc/codecs/wm8753.c
+++ b/sound/soc/codecs/wm8753.c
@@ -79,7 +79,7 @@
0x0097, 0x0097, 0x0000, 0x0004,
0x0000, 0x0083, 0x0024, 0x01ba,
0x0000, 0x0083, 0x0024, 0x01ba,
- 0x0000, 0x0000
+ 0x0000, 0x0000, 0x0000
};
/* codec private data */
@@ -1660,11 +1660,11 @@
codec->set_bias_level = wm8753_set_bias_level;
codec->dai = wm8753_dai;
codec->num_dai = 2;
- codec->reg_cache_size = ARRAY_SIZE(wm8753->reg_cache);
+ codec->reg_cache_size = ARRAY_SIZE(wm8753->reg_cache) + 1;
codec->reg_cache = &wm8753->reg_cache;
codec->private_data = wm8753;
- memcpy(codec->reg_cache, wm8753_reg, sizeof(codec->reg_cache));
+ memcpy(codec->reg_cache, wm8753_reg, sizeof(wm8753->reg_cache));
INIT_DELAYED_WORK(&codec->delayed_work, wm8753_work);
ret = wm8753_reset(codec);
diff --git a/sound/soc/codecs/wm8988.c b/sound/soc/codecs/wm8988.c
index c05f718..8c0fdf8 100644
--- a/sound/soc/codecs/wm8988.c
+++ b/sound/soc/codecs/wm8988.c
@@ -1037,14 +1037,14 @@
codec->control_data = spi;
codec->dev = &spi->dev;
- spi->dev.driver_data = wm8988;
+ dev_set_drvdata(&spi->dev, wm8988);
return wm8988_register(wm8988);
}
static int __devexit wm8988_spi_remove(struct spi_device *spi)
{
- struct wm8988_priv *wm8988 = spi->dev.driver_data;
+ struct wm8988_priv *wm8988 = dev_get_drvdata(&spi->dev);
wm8988_unregister(wm8988);
diff --git a/sound/soc/fsl/Kconfig b/sound/soc/fsl/Kconfig
index 5dbebf8..8cb65cc 100644
--- a/sound/soc/fsl/Kconfig
+++ b/sound/soc/fsl/Kconfig
@@ -33,7 +33,7 @@
config SND_SOC_MPC5200_AC97
tristate "Freescale MPC5200 PSC in AC97 mode driver"
depends on PPC_MPC52xx && PPC_BESTCOMM
- select AC97_BUS
+ select SND_SOC_AC97_BUS
select SND_MPC52xx_DMA
select PPC_BESTCOMM_GEN_BD
help
@@ -41,7 +41,7 @@
config SND_MPC52xx_SOC_PCM030
tristate "SoC AC97 Audio support for Phytec pcm030 and WM9712"
- depends on PPC_MPC5200_SIMPLE && BROKEN
+ depends on PPC_MPC5200_SIMPLE
select SND_SOC_MPC5200_AC97
select SND_SOC_WM9712
help
@@ -50,7 +50,7 @@
config SND_MPC52xx_SOC_EFIKA
tristate "SoC AC97 Audio support for bbplan Efika and STAC9766"
- depends on PPC_EFIKA && BROKEN
+ depends on PPC_EFIKA
select SND_SOC_MPC5200_AC97
select SND_SOC_STAC9766
help
diff --git a/sound/soc/fsl/mpc5200_dma.c b/sound/soc/fsl/mpc5200_dma.c
index efec33a..f0a2d40 100644
--- a/sound/soc/fsl/mpc5200_dma.c
+++ b/sound/soc/fsl/mpc5200_dma.c
@@ -456,6 +456,7 @@
return -ENODEV;
spin_lock_init(&psc_dma->lock);
+ mutex_init(&psc_dma->mutex);
psc_dma->id = be32_to_cpu(*prop);
psc_dma->irq = irq;
psc_dma->psc_regs = regs;
diff --git a/sound/soc/fsl/mpc5200_dma.h b/sound/soc/fsl/mpc5200_dma.h
index 2000803..8d396bb 100644
--- a/sound/soc/fsl/mpc5200_dma.h
+++ b/sound/soc/fsl/mpc5200_dma.h
@@ -55,6 +55,7 @@
unsigned int irq;
struct device *dev;
spinlock_t lock;
+ struct mutex mutex;
u32 sicr;
uint sysclk;
int imr;
diff --git a/sound/soc/fsl/mpc5200_psc_ac97.c b/sound/soc/fsl/mpc5200_psc_ac97.c
index 794a247..7eb5499 100644
--- a/sound/soc/fsl/mpc5200_psc_ac97.c
+++ b/sound/soc/fsl/mpc5200_psc_ac97.c
@@ -34,13 +34,20 @@
int status;
unsigned int val;
+ mutex_lock(&psc_dma->mutex);
+
/* Wait for command send status zero = ready */
status = spin_event_timeout(!(in_be16(&psc_dma->psc_regs->sr_csr.status) &
MPC52xx_PSC_SR_CMDSEND), 100, 0);
if (status == 0) {
pr_err("timeout on ac97 bus (rdy)\n");
+ mutex_unlock(&psc_dma->mutex);
return -ENODEV;
}
+
+ /* Force clear the data valid bit */
+ in_be32(&psc_dma->psc_regs->ac97_data);
+
/* Send the read */
out_be32(&psc_dma->psc_regs->ac97_cmd, (1<<31) | ((reg & 0x7f) << 24));
@@ -50,16 +57,19 @@
if (status == 0) {
pr_err("timeout on ac97 read (val) %x\n",
in_be16(&psc_dma->psc_regs->sr_csr.status));
+ mutex_unlock(&psc_dma->mutex);
return -ENODEV;
}
/* Get the data */
val = in_be32(&psc_dma->psc_regs->ac97_data);
if (((val >> 24) & 0x7f) != reg) {
pr_err("reg echo error on ac97 read\n");
+ mutex_unlock(&psc_dma->mutex);
return -ENODEV;
}
val = (val >> 8) & 0xffff;
+ mutex_unlock(&psc_dma->mutex);
return (unsigned short) val;
}
@@ -68,16 +78,21 @@
{
int status;
+ mutex_lock(&psc_dma->mutex);
+
/* Wait for command status zero = ready */
status = spin_event_timeout(!(in_be16(&psc_dma->psc_regs->sr_csr.status) &
MPC52xx_PSC_SR_CMDSEND), 100, 0);
if (status == 0) {
pr_err("timeout on ac97 bus (write)\n");
- return;
+ goto out;
}
/* Write data */
out_be32(&psc_dma->psc_regs->ac97_cmd,
((reg & 0x7f) << 24) | (val << 8));
+
+ out:
+ mutex_unlock(&psc_dma->mutex);
}
static void psc_ac97_warm_reset(struct snd_ac97 *ac97)
diff --git a/sound/soc/omap/omap-pcm.c b/sound/soc/omap/omap-pcm.c
index 6454e15..84a1950 100644
--- a/sound/soc/omap/omap-pcm.c
+++ b/sound/soc/omap/omap-pcm.c
@@ -216,12 +216,15 @@
dma_addr_t ptr;
snd_pcm_uframes_t offset;
- if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
- ptr = omap_get_dma_src_pos(prtd->dma_ch);
- else
+ if (substream->stream == SNDRV_PCM_STREAM_CAPTURE) {
ptr = omap_get_dma_dst_pos(prtd->dma_ch);
+ offset = bytes_to_frames(runtime, ptr - runtime->dma_addr);
+ } else if (!(cpu_is_omap1510())) {
+ ptr = omap_get_dma_src_pos(prtd->dma_ch);
+ offset = bytes_to_frames(runtime, ptr - runtime->dma_addr);
+ } else
+ offset = prtd->period_index * runtime->period_size;
- offset = bytes_to_frames(runtime, ptr - runtime->dma_addr);
if (offset >= runtime->buffer_size)
offset = 0;
diff --git a/sound/soc/pxa/pxa2xx-i2s.c b/sound/soc/pxa/pxa2xx-i2s.c
index 4743e26..6b8f655 100644
--- a/sound/soc/pxa/pxa2xx-i2s.c
+++ b/sound/soc/pxa/pxa2xx-i2s.c
@@ -167,6 +167,7 @@
BUG_ON(IS_ERR(clk_i2s));
clk_enable(clk_i2s);
+ dai->private_data = dai;
pxa_i2s_wait();
if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
@@ -255,7 +256,10 @@
if ((SACR1 & (SACR1_DREC | SACR1_DRPL)) == (SACR1_DREC | SACR1_DRPL)) {
SACR0 &= ~SACR0_ENB;
pxa_i2s_wait();
- clk_disable(clk_i2s);
+ if (dai->private_data != NULL) {
+ clk_disable(clk_i2s);
+ dai->private_data = NULL;
+ }
}
}
@@ -336,6 +340,7 @@
return PTR_ERR(clk_i2s);
pxa_i2s_dai.dev = &dev->dev;
+ pxa_i2s_dai.private_data = NULL;
ret = snd_soc_register_dai(&pxa_i2s_dai);
if (ret != 0)
clk_put(clk_i2s);
diff --git a/sound/sound_core.c b/sound/sound_core.c
index 12522e6..a41f8b1 100644
--- a/sound/sound_core.c
+++ b/sound/sound_core.c
@@ -10,6 +10,8 @@
#include <linux/module.h>
#include <linux/device.h>
#include <linux/err.h>
+#include <linux/kdev_t.h>
+#include <linux/major.h>
#include <sound/core.h>
#ifdef CONFIG_SOUND_OSS_CORE
@@ -29,6 +31,8 @@
static char *sound_nodename(struct device *dev)
{
+ if (MAJOR(dev->devt) == SOUND_MAJOR)
+ return NULL;
return kasprintf(GFP_KERNEL, "snd/%s", dev_name(dev));
}
@@ -104,7 +108,6 @@
#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/sound.h>
-#include <linux/major.h>
#include <linux/kmod.h>
#define SOUND_STEP 16
diff --git a/sound/usb/caiaq/device.c b/sound/usb/caiaq/device.c
index 0e5db71..de38108 100644
--- a/sound/usb/caiaq/device.c
+++ b/sound/usb/caiaq/device.c
@@ -35,7 +35,7 @@
#include "input.h"
MODULE_AUTHOR("Daniel Mack <daniel@caiaq.de>");
-MODULE_DESCRIPTION("caiaq USB audio, version 1.3.17");
+MODULE_DESCRIPTION("caiaq USB audio, version 1.3.18");
MODULE_LICENSE("GPL");
MODULE_SUPPORTED_DEVICE("{{Native Instruments, RigKontrol2},"
"{Native Instruments, RigKontrol3},"
@@ -349,7 +349,9 @@
log("Unable to set up control system (ret=%d)\n", ret);
}
-static int create_card(struct usb_device* usb_dev, struct snd_card **cardp)
+static int create_card(struct usb_device *usb_dev,
+ struct usb_interface *intf,
+ struct snd_card **cardp)
{
int devnum;
int err;
@@ -374,7 +376,7 @@
dev->chip.usb_id = USB_ID(le16_to_cpu(usb_dev->descriptor.idVendor),
le16_to_cpu(usb_dev->descriptor.idProduct));
spin_lock_init(&dev->spinlock);
- snd_card_set_dev(card, &usb_dev->dev);
+ snd_card_set_dev(card, &intf->dev);
*cardp = card;
return 0;
@@ -461,7 +463,7 @@
struct snd_card *card;
struct usb_device *device = interface_to_usbdev(intf);
- ret = create_card(device, &card);
+ ret = create_card(device, intf, &card);
if (ret < 0)
return ret;
diff --git a/sound/usb/usx2y/us122l.c b/sound/usb/usx2y/us122l.c
index a5aae9d..fd44946 100644
--- a/sound/usb/usx2y/us122l.c
+++ b/sound/usb/usx2y/us122l.c
@@ -514,7 +514,6 @@
US122L(card)->chip.dev->bus->busnum,
US122L(card)->chip.dev->devnum
);
- snd_card_set_dev(card, &device->dev);
*cardp = card;
return 0;
}
@@ -531,6 +530,7 @@
if (err < 0)
return err;
+ snd_card_set_dev(card, &intf->dev);
if (!us122l_create_card(card)) {
snd_card_free(card);
return -EINVAL;
diff --git a/sound/usb/usx2y/usbusx2y.c b/sound/usb/usx2y/usbusx2y.c
index 5ce0da2..cb4bb83 100644
--- a/sound/usb/usx2y/usbusx2y.c
+++ b/sound/usb/usx2y/usbusx2y.c
@@ -364,7 +364,6 @@
0,//us428(card)->usbmidi.ifnum,
usX2Y(card)->chip.dev->bus->busnum, usX2Y(card)->chip.dev->devnum
);
- snd_card_set_dev(card, &device->dev);
*cardp = card;
return 0;
}
@@ -388,6 +387,7 @@
err = usX2Y_create_card(device, &card);
if (err < 0)
return err;
+ snd_card_set_dev(card, &intf->dev);
if ((err = usX2Y_hwdep_new(card, device)) < 0 ||
(err = snd_card_register(card)) < 0) {
snd_card_free(card);
diff --git a/sound/usb/usx2y/usbusx2yaudio.c b/sound/usb/usx2y/usbusx2yaudio.c
index dd1ab61..9efd27f 100644
--- a/sound/usb/usx2y/usbusx2yaudio.c
+++ b/sound/usb/usx2y/usbusx2yaudio.c
@@ -296,9 +296,10 @@
static void usX2Y_error_sequence(struct usX2Ydev *usX2Y,
struct snd_usX2Y_substream *subs, struct urb *urb)
{
- snd_printk(KERN_ERR "Sequence Error!(hcd_frame=%i ep=%i%s;wait=%i,frame=%i).\n"
- KERN_ERR "Most propably some urb of usb-frame %i is still missing.\n"
- KERN_ERR "Cause could be too long delays in usb-hcd interrupt handling.\n",
+ snd_printk(KERN_ERR
+"Sequence Error!(hcd_frame=%i ep=%i%s;wait=%i,frame=%i).\n"
+"Most propably some urb of usb-frame %i is still missing.\n"
+"Cause could be too long delays in usb-hcd interrupt handling.\n",
usb_get_current_frame_number(usX2Y->chip.dev),
subs->endpoint, usb_pipein(urb->pipe) ? "in" : "out",
usX2Y->wait_iso_frame, urb->start_frame, usX2Y->wait_iso_frame);
diff --git a/tools/perf/CREDITS b/tools/perf/CREDITS
new file mode 100644
index 0000000..c2ddcb3
--- /dev/null
+++ b/tools/perf/CREDITS
@@ -0,0 +1,30 @@
+Most of the infrastructure that 'perf' uses here has been reused
+from the Git project, as of version:
+
+ 66996ec: Sync with 1.6.2.4
+
+Here is an (incomplete!) list of main contributors to those files
+in util/* and elsewhere:
+
+ Alex Riesen
+ Christian Couder
+ Dmitry Potapov
+ Jeff King
+ Johannes Schindelin
+ Johannes Sixt
+ Junio C Hamano
+ Linus Torvalds
+ Matthias Kestenholz
+ Michal Ostrowski
+ Miklos Vajna
+ Petr Baudis
+ Pierre Habouzit
+ René Scharfe
+ Samuel Tardieu
+ Shawn O. Pearce
+ Steffen Prohaska
+ Steve Haslam
+
+Thanks guys!
+
+The full history of the files can be found in the upstream Git commits.
diff --git a/tools/perf/Documentation/perf-report.txt b/tools/perf/Documentation/perf-report.txt
index 52d3fc6..8aa3f8c 100644
--- a/tools/perf/Documentation/perf-report.txt
+++ b/tools/perf/Documentation/perf-report.txt
@@ -13,13 +13,25 @@
DESCRIPTION
-----------
This command displays the performance counter profile information recorded
-via perf report.
+via perf record.
OPTIONS
-------
-i::
--input=::
Input file name. (default: perf.data)
+-d::
+--dsos=::
+ Only consider symbols in these dsos. CSV that understands
+ file://filename entries.
+-C::
+--comms=::
+ Only consider symbols in these comms. CSV that understands
+ file://filename entries.
+-S::
+--symbols=::
+ Only consider these symbols. CSV that understands
+ file://filename entries.
SEE ALSO
--------
diff --git a/tools/perf/Documentation/perf-stat.txt b/tools/perf/Documentation/perf-stat.txt
index c368a72..0d74346 100644
--- a/tools/perf/Documentation/perf-stat.txt
+++ b/tools/perf/Documentation/perf-stat.txt
@@ -8,8 +8,8 @@
SYNOPSIS
--------
[verse]
-'perf stat' [-e <EVENT> | --event=EVENT] [-l] [-a] <command>
-'perf stat' [-e <EVENT> | --event=EVENT] [-l] [-a] -- <command> [<options>]
+'perf stat' [-e <EVENT> | --event=EVENT] [-S] [-a] <command>
+'perf stat' [-e <EVENT> | --event=EVENT] [-S] [-a] -- <command> [<options>]
DESCRIPTION
-----------
@@ -40,7 +40,7 @@
-a::
system-wide collection
--l::
+-S::
scale counter values
EXAMPLES
diff --git a/tools/perf/Makefile b/tools/perf/Makefile
index 36d7eef..7822b3d 100644
--- a/tools/perf/Makefile
+++ b/tools/perf/Makefile
@@ -164,7 +164,7 @@
# CFLAGS and LDFLAGS are for the users to override from the command line.
-CFLAGS = $(M64) -ggdb3 -Wall -Wstrict-prototypes -Wmissing-declarations -Wmissing-prototypes -std=gnu99 -Wdeclaration-after-statement -Werror -O6
+CFLAGS = $(M64) -ggdb3 -Wall -Wextra -Wstrict-prototypes -Wmissing-declarations -Wmissing-prototypes -std=gnu99 -Wdeclaration-after-statement -Werror -O6
LDFLAGS = -lpthread -lrt -lelf -lm
ALL_CFLAGS = $(CFLAGS)
ALL_LDFLAGS = $(LDFLAGS)
@@ -223,7 +223,7 @@
# Those must not be GNU-specific; they are shared with perl/ which may
# be built by a different compiler. (Note that this is an artifact now
# but it still might be nice to keep that distinction.)
-BASIC_CFLAGS =
+BASIC_CFLAGS = -Iutil/include
BASIC_LDFLAGS =
# Guard against environment variables
@@ -289,10 +289,11 @@
LIB_FILE=libperf.a
LIB_H += ../../include/linux/perf_counter.h
+LIB_H += ../../include/linux/rbtree.h
+LIB_H += ../../include/linux/list.h
+LIB_H += util/include/linux/list.h
LIB_H += perf.h
-LIB_H += types.h
-LIB_H += util/list.h
-LIB_H += util/rbtree.h
+LIB_H += util/types.h
LIB_H += util/levenshtein.h
LIB_H += util/parse-options.h
LIB_H += util/parse-events.h
@@ -301,9 +302,11 @@
LIB_H += util/help.h
LIB_H += util/strbuf.h
LIB_H += util/string.h
+LIB_H += util/strlist.h
LIB_H += util/run-command.h
LIB_H += util/sigchain.h
LIB_H += util/symbol.h
+LIB_H += util/module.h
LIB_H += util/color.h
LIB_OBJS += util/abspath.o
@@ -322,12 +325,16 @@
LIB_OBJS += util/quote.o
LIB_OBJS += util/strbuf.o
LIB_OBJS += util/string.o
+LIB_OBJS += util/strlist.o
LIB_OBJS += util/usage.o
LIB_OBJS += util/wrapper.o
LIB_OBJS += util/sigchain.o
LIB_OBJS += util/symbol.o
+LIB_OBJS += util/module.o
LIB_OBJS += util/color.o
LIB_OBJS += util/pager.o
+LIB_OBJS += util/header.o
+LIB_OBJS += util/callchain.o
BUILTIN_OBJS += builtin-annotate.o
BUILTIN_OBJS += builtin-help.o
@@ -377,12 +384,6 @@
endif
endif
-ifdef ZLIB_PATH
- BASIC_CFLAGS += -I$(ZLIB_PATH)/include
- EXTLIBS += -L$(ZLIB_PATH)/$(lib) $(CC_LD_DYNPATH)$(ZLIB_PATH)/$(lib)
-endif
-EXTLIBS += -lz
-
ifdef NEEDS_SOCKET
EXTLIBS += -lsocket
endif
@@ -693,6 +694,9 @@
util/config.o: util/config.c PERF-CFLAGS
$(QUIET_CC)$(CC) -o $*.o -c $(ALL_CFLAGS) -DETC_PERFCONFIG='"$(ETC_PERFCONFIG_SQ)"' $<
+util/rbtree.o: ../../lib/rbtree.c PERF-CFLAGS
+ $(QUIET_CC)$(CC) -o util/rbtree.o -c $(ALL_CFLAGS) -DETC_PERFCONFIG='"$(ETC_PERFCONFIG_SQ)"' $<
+
perf-%$X: %.o $(PERFLIBS)
$(QUIET_LINK)$(CC) $(ALL_CFLAGS) -o $@ $(ALL_LDFLAGS) $(filter %.o,$^) $(LIBS)
diff --git a/tools/perf/builtin-annotate.c b/tools/perf/builtin-annotate.c
index 7e58e3a..5f9eefe 100644
--- a/tools/perf/builtin-annotate.c
+++ b/tools/perf/builtin-annotate.c
@@ -10,9 +10,9 @@
#include "util/util.h"
#include "util/color.h"
-#include "util/list.h"
+#include <linux/list.h>
#include "util/cache.h"
-#include "util/rbtree.h"
+#include <linux/rbtree.h>
#include "util/symbol.h"
#include "util/string.h"
@@ -25,10 +25,6 @@
#define SHOW_USER 2
#define SHOW_HV 4
-#define MIN_GREEN 0.5
-#define MIN_RED 5.0
-
-
static char const *input_name = "perf.data";
static char *vmlinux = "vmlinux";
@@ -43,6 +39,10 @@
static int verbose;
+static int modules;
+
+static int full_paths;
+
static int print_line;
static unsigned long page_size;
@@ -160,7 +160,7 @@
static struct symbol *vdso__find_symbol(struct dso *dso, u64 ip)
{
- return dso__find_symbol(kernel_dso, ip);
+ return dso__find_symbol(dso, ip);
}
static int load_kernel(void)
@@ -171,8 +171,8 @@
if (!kernel_dso)
return -1;
- err = dso__load_kernel(kernel_dso, vmlinux, NULL, verbose);
- if (err) {
+ err = dso__load_kernel(kernel_dso, vmlinux, NULL, verbose, modules);
+ if (err <= 0) {
dso__delete(kernel_dso);
kernel_dso = NULL;
} else
@@ -203,7 +203,7 @@
return ip - map->start + map->pgoff;
}
-static u64 vdso__map_ip(struct map *map, u64 ip)
+static u64 vdso__map_ip(struct map *map __used, u64 ip)
{
return ip;
}
@@ -600,7 +600,7 @@
static int sort_dimension__add(char *tok)
{
- int i;
+ unsigned int i;
for (i = 0; i < ARRAY_SIZE(sort_dimensions); i++) {
struct sort_dimension *sd = &sort_dimensions[i];
@@ -855,7 +855,7 @@
total_unknown = 0;
static int
-process_overflow_event(event_t *event, unsigned long offset, unsigned long head)
+process_sample_event(event_t *event, unsigned long offset, unsigned long head)
{
char level;
int show = 0;
@@ -1013,10 +1013,10 @@
static int
process_event(event_t *event, unsigned long offset, unsigned long head)
{
- if (event->header.misc & PERF_EVENT_MISC_OVERFLOW)
- return process_overflow_event(event, offset, head);
-
switch (event->header.type) {
+ case PERF_EVENT_SAMPLE:
+ return process_sample_event(event, offset, head);
+
case PERF_EVENT_MMAP:
return process_mmap_event(event, offset, head);
@@ -1043,24 +1043,6 @@
return 0;
}
-static char *get_color(double percent)
-{
- char *color = PERF_COLOR_NORMAL;
-
- /*
- * We color high-overhead entries in red, mid-overhead
- * entries in green - and keep the low overhead places
- * normal:
- */
- if (percent >= MIN_RED)
- color = PERF_COLOR_RED;
- else {
- if (percent > MIN_GREEN)
- color = PERF_COLOR_GREEN;
- }
- return color;
-}
-
static int
parse_line(FILE *file, struct symbol *sym, u64 start, u64 len)
{
@@ -1069,7 +1051,7 @@
static const char *prev_color;
unsigned int offset;
size_t line_len;
- u64 line_ip;
+ s64 line_ip;
int ret;
char *c;
@@ -1122,7 +1104,7 @@
} else if (sym->hist_sum)
percent = 100.0 * hits / sym->hist_sum;
- color = get_color(percent);
+ color = get_percent_color(percent);
/*
* Also color the filename and line if needed, with
@@ -1258,7 +1240,7 @@
sym_ext = rb_entry(node, struct sym_ext, node);
percent = sym_ext->percent;
- color = get_color(percent);
+ color = get_percent_color(percent);
path = sym_ext->path;
color_fprintf(stdout, color, " %7.2f %s", percent, path);
@@ -1268,19 +1250,25 @@
static void annotate_sym(struct dso *dso, struct symbol *sym)
{
- char *filename = dso->name;
+ char *filename = dso->name, *d_filename;
u64 start, end, len;
char command[PATH_MAX*2];
FILE *file;
if (!filename)
return;
- if (dso == kernel_dso)
+ if (sym->module)
+ filename = sym->module->path;
+ else if (dso == kernel_dso)
filename = vmlinux;
start = sym->obj_start;
if (!start)
start = sym->start;
+ if (full_paths)
+ d_filename = filename;
+ else
+ d_filename = basename(filename);
end = start + sym->end - sym->start + 1;
len = sym->end - sym->start;
@@ -1291,13 +1279,14 @@
}
printf("\n\n------------------------------------------------\n");
- printf(" Percent | Source code & Disassembly of %s\n", filename);
+ printf(" Percent | Source code & Disassembly of %s\n", d_filename);
printf("------------------------------------------------\n");
if (verbose >= 2)
printf("annotating [%p] %30s : [%p] %30s\n", dso, dso->name, sym, sym->name);
- sprintf(command, "objdump --start-address=0x%016Lx --stop-address=0x%016Lx -dS %s", (u64)start, (u64)end, filename);
+ sprintf(command, "objdump --start-address=0x%016Lx --stop-address=0x%016Lx -dS %s|grep -v %s",
+ (u64)start, (u64)end, filename, filename);
if (verbose >= 3)
printf("doing: %s\n", command);
@@ -1428,7 +1417,7 @@
head += size;
- if (offset + head < stat.st_size)
+ if (offset + head < (unsigned long)stat.st_size)
goto more;
rc = EXIT_SUCCESS;
@@ -1472,8 +1461,12 @@
OPT_BOOLEAN('D', "dump-raw-trace", &dump_trace,
"dump raw trace in ASCII"),
OPT_STRING('k', "vmlinux", &vmlinux, "file", "vmlinux pathname"),
+ OPT_BOOLEAN('m', "modules", &modules,
+ "load module symbols - WARNING: use only with -k and LIVE kernel"),
OPT_BOOLEAN('l', "print-line", &print_line,
"print matching source lines (may be slow)"),
+ OPT_BOOLEAN('P', "full-paths", &full_paths,
+ "Don't shorten the displayed pathnames"),
OPT_END()
};
@@ -1492,7 +1485,7 @@
free(str);
}
-int cmd_annotate(int argc, const char **argv, const char *prefix)
+int cmd_annotate(int argc, const char **argv, const char *prefix __used)
{
symbol__init();
diff --git a/tools/perf/builtin-help.c b/tools/perf/builtin-help.c
index 0f32dc3..2599d86 100644
--- a/tools/perf/builtin-help.c
+++ b/tools/perf/builtin-help.c
@@ -3,6 +3,7 @@
*
* Builtin help command
*/
+#include "perf.h"
#include "util/cache.h"
#include "builtin.h"
#include "util/exec_cmd.h"
@@ -277,7 +278,7 @@
void list_common_cmds_help(void)
{
- int i, longest = 0;
+ unsigned int i, longest = 0;
for (i = 0; i < ARRAY_SIZE(common_cmds); i++) {
if (longest < strlen(common_cmds[i].name))
@@ -415,9 +416,10 @@
open_html(page_path.buf);
}
-int cmd_help(int argc, const char **argv, const char *prefix)
+int cmd_help(int argc, const char **argv, const char *prefix __used)
{
const char *alias;
+
load_command_list("perf-", &main_cmds, &other_cmds);
perf_config(perf_help_config, NULL);
diff --git a/tools/perf/builtin-list.c b/tools/perf/builtin-list.c
index fe60e37..f990fa8 100644
--- a/tools/perf/builtin-list.c
+++ b/tools/perf/builtin-list.c
@@ -13,7 +13,7 @@
#include "util/parse-options.h"
#include "util/parse-events.h"
-int cmd_list(int argc, const char **argv, const char *prefix)
+int cmd_list(int argc __used, const char **argv __used, const char *prefix __used)
{
print_events();
return 0;
diff --git a/tools/perf/builtin-record.c b/tools/perf/builtin-record.c
index d7ebbd7..4ef78a5 100644
--- a/tools/perf/builtin-record.c
+++ b/tools/perf/builtin-record.c
@@ -14,6 +14,8 @@
#include "util/parse-events.h"
#include "util/string.h"
+#include "util/header.h"
+
#include <unistd.h>
#include <sched.h>
@@ -39,6 +41,8 @@
static int append_file = 0;
static int call_graph = 0;
static int verbose = 0;
+static int inherit_stat = 0;
+static int no_samples = 0;
static long samples;
static struct timeval last_read;
@@ -52,7 +56,8 @@
static int nr_cpu;
static int file_new = 1;
-static struct perf_file_header file_header;
+
+struct perf_header *header;
struct mmap_event {
struct perf_event_header header;
@@ -289,7 +294,7 @@
while (1) {
char bf[BUFSIZ], *pbf = bf;
struct mmap_event mmap_ev = {
- .header.type = PERF_EVENT_MMAP,
+ .header = { .type = PERF_EVENT_MMAP },
};
int n;
size_t size;
@@ -306,12 +311,11 @@
continue;
pbf += n + 3;
if (*pbf == 'x') { /* vm_exec */
- char *execname = strrchr(bf, ' ');
+ char *execname = strchr(bf, '/');
- if (execname == NULL || execname[1] != '/')
+ if (execname == NULL)
continue;
- execname += 1;
size = strlen(execname);
execname[size - 1] = '\0'; /* Remove \n */
memcpy(mmap_ev.filename, execname, size);
@@ -329,7 +333,7 @@
fclose(fp);
}
-static void synthesize_samples(void)
+static void synthesize_all(void)
{
DIR *proc;
struct dirent dirent, *next;
@@ -353,10 +357,35 @@
static int group_fd;
+static struct perf_header_attr *get_header_attr(struct perf_counter_attr *a, int nr)
+{
+ struct perf_header_attr *h_attr;
+
+ if (nr < header->attrs) {
+ h_attr = header->attr[nr];
+ } else {
+ h_attr = perf_header_attr__new(a);
+ perf_header__add_attr(header, h_attr);
+ }
+
+ return h_attr;
+}
+
static void create_counter(int counter, int cpu, pid_t pid)
{
struct perf_counter_attr *attr = attrs + counter;
- int track = 1;
+ struct perf_header_attr *h_attr;
+ int track = !counter; /* only the first counter needs these */
+ struct {
+ u64 count;
+ u64 time_enabled;
+ u64 time_running;
+ u64 id;
+ } read_data;
+
+ attr->read_format = PERF_FORMAT_TOTAL_TIME_ENABLED |
+ PERF_FORMAT_TOTAL_TIME_RUNNING |
+ PERF_FORMAT_ID;
attr->sample_type = PERF_SAMPLE_IP | PERF_SAMPLE_TID;
@@ -366,25 +395,20 @@
attr->sample_freq = freq;
}
+ if (no_samples)
+ attr->sample_freq = 0;
+
+ if (inherit_stat)
+ attr->inherit_stat = 1;
+
if (call_graph)
attr->sample_type |= PERF_SAMPLE_CALLCHAIN;
- if (file_new) {
- file_header.sample_type = attr->sample_type;
- } else {
- if (file_header.sample_type != attr->sample_type) {
- fprintf(stderr, "incompatible append\n");
- exit(-1);
- }
- }
-
attr->mmap = track;
attr->comm = track;
attr->inherit = (cpu < 0) && inherit;
attr->disabled = 1;
- track = 0; /* only the first counter needs these */
-
try_again:
fd[nr_cpu][counter] = sys_perf_counter_open(attr, pid, cpu, group_fd, 0);
@@ -415,6 +439,22 @@
exit(-1);
}
+ h_attr = get_header_attr(attr, counter);
+
+ if (!file_new) {
+ if (memcmp(&h_attr->attr, attr, sizeof(*attr))) {
+ fprintf(stderr, "incompatible append\n");
+ exit(-1);
+ }
+ }
+
+ if (read(fd[nr_cpu][counter], &read_data, sizeof(read_data)) == -1) {
+ perror("Unable to read perf file descriptor\n");
+ exit(-1);
+ }
+
+ perf_header_attr__add_id(h_attr, read_data.id);
+
assert(fd[nr_cpu][counter] >= 0);
fcntl(fd[nr_cpu][counter], F_SETFL, O_NONBLOCK);
@@ -445,11 +485,6 @@
{
int counter;
- if (pid > 0) {
- pid_synthesize_comm_event(pid, 0);
- pid_synthesize_mmap_samples(pid);
- }
-
group_fd = -1;
for (counter = 0; counter < nr_counters; counter++)
create_counter(counter, cpu, pid);
@@ -459,17 +494,16 @@
static void atexit_header(void)
{
- file_header.data_size += bytes_written;
+ header->data_size += bytes_written;
- if (pwrite(output, &file_header, sizeof(file_header), 0) == -1)
- perror("failed to write on file headers");
+ perf_header__write(header, output);
}
static int __cmd_record(int argc, const char **argv)
{
int i, counter;
struct stat st;
- pid_t pid;
+ pid_t pid = 0;
int flags;
int ret;
@@ -500,22 +534,31 @@
exit(-1);
}
- if (!file_new) {
- if (read(output, &file_header, sizeof(file_header)) == -1) {
- perror("failed to read file headers");
- exit(-1);
- }
-
- lseek(output, file_header.data_size, SEEK_CUR);
- }
+ if (!file_new)
+ header = perf_header__read(output);
+ else
+ header = perf_header__new();
atexit(atexit_header);
if (!system_wide) {
- open_counters(-1, target_pid != -1 ? target_pid : getpid());
+ pid = target_pid;
+ if (pid == -1)
+ pid = getpid();
+
+ open_counters(-1, pid);
} else for (i = 0; i < nr_cpus; i++)
open_counters(i, target_pid);
+ if (file_new)
+ perf_header__write(header, output);
+
+ if (!system_wide) {
+ pid_synthesize_comm_event(pid, 0);
+ pid_synthesize_mmap_samples(pid);
+ } else
+ synthesize_all();
+
if (target_pid == -1 && argc) {
pid = fork();
if (pid < 0)
@@ -539,10 +582,7 @@
}
}
- if (system_wide)
- synthesize_samples();
-
- while (!done) {
+ for (;;) {
int hits = samples;
for (i = 0; i < nr_cpu; i++) {
@@ -550,8 +590,11 @@
mmap_read(&mmap_array[i][counter]);
}
- if (hits == samples)
+ if (hits == samples) {
+ if (done)
+ break;
ret = poll(event_array, nr_poll, 100);
+ }
}
/*
@@ -600,10 +643,14 @@
"do call-graph (stack chain/backtrace) recording"),
OPT_BOOLEAN('v', "verbose", &verbose,
"be more verbose (show counter open errors, etc)"),
+ OPT_BOOLEAN('s', "stat", &inherit_stat,
+ "per thread counts"),
+ OPT_BOOLEAN('n', "no-samples", &no_samples,
+ "don't sample"),
OPT_END()
};
-int cmd_record(int argc, const char **argv, const char *prefix)
+int cmd_record(int argc, const char **argv, const char *prefix __used)
{
int counter;
diff --git a/tools/perf/builtin-report.c b/tools/perf/builtin-report.c
index 5eb5566..4e5cc26 100644
--- a/tools/perf/builtin-report.c
+++ b/tools/perf/builtin-report.c
@@ -10,13 +10,16 @@
#include "util/util.h"
#include "util/color.h"
-#include "util/list.h"
+#include <linux/list.h>
#include "util/cache.h"
-#include "util/rbtree.h"
+#include <linux/rbtree.h>
#include "util/symbol.h"
#include "util/string.h"
+#include "util/callchain.h"
+#include "util/strlist.h"
#include "perf.h"
+#include "util/header.h"
#include "util/parse-options.h"
#include "util/parse-events.h"
@@ -30,6 +33,8 @@
static char default_sort_order[] = "comm,dso";
static char *sort_order = default_sort_order;
+static char *dso_list_str, *comm_list_str, *sym_list_str;
+static struct strlist *dso_list, *comm_list, *sym_list;
static int input;
static int show_mask = SHOW_KERNEL | SHOW_USER | SHOW_HV;
@@ -41,6 +46,8 @@
static int verbose;
#define eprintf(x...) do { if (verbose) fprintf(stderr, x); } while (0)
+static int modules;
+
static int full_paths;
static unsigned long page_size;
@@ -52,6 +59,18 @@
static int exclude_other = 1;
+static char callchain_default_opt[] = "fractal,0.5";
+
+static int callchain;
+
+static
+struct callchain_param callchain_param = {
+ .mode = CHAIN_GRAPH_ABS,
+ .min_percent = 0.5
+};
+
+static u64 sample_type;
+
struct ip_event {
struct perf_event_header header;
u64 ip;
@@ -59,11 +78,6 @@
unsigned char __more_data[];
};
-struct ip_callchain {
- u64 nr;
- u64 ips[0];
-};
-
struct mmap_event {
struct perf_event_header header;
u32 pid, tid;
@@ -97,6 +111,13 @@
u64 lost;
};
+struct read_event {
+ struct perf_event_header header;
+ u32 pid,tid;
+ u64 value;
+ u64 format[3];
+};
+
typedef union event_union {
struct perf_event_header header;
struct ip_event ip;
@@ -105,11 +126,13 @@
struct fork_event fork;
struct period_event period;
struct lost_event lost;
+ struct read_event read;
} event_t;
static LIST_HEAD(dsos);
static struct dso *kernel_dso;
static struct dso *vdso;
+static struct dso *hypervisor_dso;
static void dsos__add(struct dso *dso)
{
@@ -165,7 +188,7 @@
static struct symbol *vdso__find_symbol(struct dso *dso, u64 ip)
{
- return dso__find_symbol(kernel_dso, ip);
+ return dso__find_symbol(dso, ip);
}
static int load_kernel(void)
@@ -176,8 +199,8 @@
if (!kernel_dso)
return -1;
- err = dso__load_kernel(kernel_dso, vmlinux, NULL, verbose);
- if (err) {
+ err = dso__load_kernel(kernel_dso, vmlinux, NULL, verbose, modules);
+ if (err <= 0) {
dso__delete(kernel_dso);
kernel_dso = NULL;
} else
@@ -191,6 +214,11 @@
dsos__add(vdso);
+ hypervisor_dso = dso__new("[hypervisor]", 0);
+ if (!hypervisor_dso)
+ return -1;
+ dsos__add(hypervisor_dso);
+
return err;
}
@@ -222,14 +250,14 @@
return ip - map->start + map->pgoff;
}
-static u64 vdso__map_ip(struct map *map, u64 ip)
+static u64 vdso__map_ip(struct map *map __used, u64 ip)
{
return ip;
}
static inline int is_anon_memory(const char *filename)
{
- return strcmp(filename, "//anon") == 0;
+ return strcmp(filename, "//anon") == 0;
}
static struct map *map__new(struct mmap_event *event)
@@ -400,9 +428,27 @@
list_for_each_entry_safe(pos, tmp, &self->maps, node) {
if (map__overlap(pos, map)) {
- list_del_init(&pos->node);
- /* XXX leaks dsos */
- free(pos);
+ if (verbose >= 2) {
+ printf("overlapping maps:\n");
+ map__fprintf(map, stdout);
+ map__fprintf(pos, stdout);
+ }
+
+ if (map->start <= pos->start && map->end > pos->start)
+ pos->start = map->end;
+
+ if (map->end >= pos->end && map->start < pos->end)
+ pos->end = map->start;
+
+ if (verbose >= 2) {
+ printf("after collision:\n");
+ map__fprintf(pos, stdout);
+ }
+
+ if (pos->start >= pos->end) {
+ list_del_init(&pos->node);
+ free(pos);
+ }
}
}
@@ -464,17 +510,19 @@
static struct rb_root hist;
struct hist_entry {
- struct rb_node rb_node;
+ struct rb_node rb_node;
- struct thread *thread;
- struct map *map;
- struct dso *dso;
- struct symbol *sym;
- struct symbol *parent;
- u64 ip;
- char level;
+ struct thread *thread;
+ struct map *map;
+ struct dso *dso;
+ struct symbol *sym;
+ struct symbol *parent;
+ u64 ip;
+ char level;
+ struct callchain_node callchain;
+ struct rb_root sorted_chain;
- u64 count;
+ u64 count;
};
/*
@@ -609,7 +657,11 @@
if (self->sym) {
ret += fprintf(fp, "[%c] %s",
- self->dso == kernel_dso ? 'k' : '.', self->sym->name);
+ self->dso == kernel_dso ? 'k' :
+ self->dso == hypervisor_dso ? 'h' : '.', self->sym->name);
+
+ if (self->sym->module)
+ ret += fprintf(fp, "\t[%s]", self->sym->module->name);
} else {
ret += fprintf(fp, "%#016llx", (u64)self->ip);
}
@@ -674,7 +726,7 @@
static int sort_dimension__add(char *tok)
{
- int i;
+ unsigned int i;
for (i = 0; i < ARRAY_SIZE(sort_dimensions); i++) {
struct sort_dimension *sd = &sort_dimensions[i];
@@ -744,6 +796,167 @@
return cmp;
}
+static size_t ipchain__fprintf_graph_line(FILE *fp, int depth, int depth_mask)
+{
+ int i;
+ size_t ret = 0;
+
+ ret += fprintf(fp, "%s", " ");
+
+ for (i = 0; i < depth; i++)
+ if (depth_mask & (1 << i))
+ ret += fprintf(fp, "| ");
+ else
+ ret += fprintf(fp, " ");
+
+ ret += fprintf(fp, "\n");
+
+ return ret;
+}
+static size_t
+ipchain__fprintf_graph(FILE *fp, struct callchain_list *chain, int depth,
+ int depth_mask, int count, u64 total_samples,
+ int hits)
+{
+ int i;
+ size_t ret = 0;
+
+ ret += fprintf(fp, "%s", " ");
+ for (i = 0; i < depth; i++) {
+ if (depth_mask & (1 << i))
+ ret += fprintf(fp, "|");
+ else
+ ret += fprintf(fp, " ");
+ if (!count && i == depth - 1) {
+ double percent;
+
+ percent = hits * 100.0 / total_samples;
+ ret += percent_color_fprintf(fp, "--%2.2f%%-- ", percent);
+ } else
+ ret += fprintf(fp, "%s", " ");
+ }
+ if (chain->sym)
+ ret += fprintf(fp, "%s\n", chain->sym->name);
+ else
+ ret += fprintf(fp, "%p\n", (void *)(long)chain->ip);
+
+ return ret;
+}
+
+static size_t
+callchain__fprintf_graph(FILE *fp, struct callchain_node *self,
+ u64 total_samples, int depth, int depth_mask)
+{
+ struct rb_node *node, *next;
+ struct callchain_node *child;
+ struct callchain_list *chain;
+ int new_depth_mask = depth_mask;
+ u64 new_total;
+ size_t ret = 0;
+ int i;
+
+ if (callchain_param.mode == CHAIN_GRAPH_REL)
+ new_total = self->cumul_hit;
+ else
+ new_total = total_samples;
+
+ node = rb_first(&self->rb_root);
+ while (node) {
+ child = rb_entry(node, struct callchain_node, rb_node);
+
+ /*
+ * The depth mask manages the output of pipes that show
+ * the depth. We don't want to keep the pipes of the current
+ * level for the last child of this depth
+ */
+ next = rb_next(node);
+ if (!next)
+ new_depth_mask &= ~(1 << (depth - 1));
+
+ /*
+ * But we keep the older depth mask for the line seperator
+ * to keep the level link until we reach the last child
+ */
+ ret += ipchain__fprintf_graph_line(fp, depth, depth_mask);
+ i = 0;
+ list_for_each_entry(chain, &child->val, list) {
+ if (chain->ip >= PERF_CONTEXT_MAX)
+ continue;
+ ret += ipchain__fprintf_graph(fp, chain, depth,
+ new_depth_mask, i++,
+ new_total,
+ child->cumul_hit);
+ }
+ ret += callchain__fprintf_graph(fp, child, new_total,
+ depth + 1,
+ new_depth_mask | (1 << depth));
+ node = next;
+ }
+
+ return ret;
+}
+
+static size_t
+callchain__fprintf_flat(FILE *fp, struct callchain_node *self,
+ u64 total_samples)
+{
+ struct callchain_list *chain;
+ size_t ret = 0;
+
+ if (!self)
+ return 0;
+
+ ret += callchain__fprintf_flat(fp, self->parent, total_samples);
+
+
+ list_for_each_entry(chain, &self->val, list) {
+ if (chain->ip >= PERF_CONTEXT_MAX)
+ continue;
+ if (chain->sym)
+ ret += fprintf(fp, " %s\n", chain->sym->name);
+ else
+ ret += fprintf(fp, " %p\n",
+ (void *)(long)chain->ip);
+ }
+
+ return ret;
+}
+
+static size_t
+hist_entry_callchain__fprintf(FILE *fp, struct hist_entry *self,
+ u64 total_samples)
+{
+ struct rb_node *rb_node;
+ struct callchain_node *chain;
+ size_t ret = 0;
+
+ rb_node = rb_first(&self->sorted_chain);
+ while (rb_node) {
+ double percent;
+
+ chain = rb_entry(rb_node, struct callchain_node, rb_node);
+ percent = chain->hit * 100.0 / total_samples;
+ switch (callchain_param.mode) {
+ case CHAIN_FLAT:
+ ret += percent_color_fprintf(fp, " %6.2f%%\n",
+ percent);
+ ret += callchain__fprintf_flat(fp, chain, total_samples);
+ break;
+ case CHAIN_GRAPH_ABS: /* Falldown */
+ case CHAIN_GRAPH_REL:
+ ret += callchain__fprintf_graph(fp, chain,
+ total_samples, 1, 1);
+ default:
+ break;
+ }
+ ret += fprintf(fp, "\n");
+ rb_node = rb_next(rb_node);
+ }
+
+ return ret;
+}
+
+
static size_t
hist_entry__fprintf(FILE *fp, struct hist_entry *self, u64 total_samples)
{
@@ -753,25 +966,10 @@
if (exclude_other && !self->parent)
return 0;
- if (total_samples) {
- double percent = self->count * 100.0 / total_samples;
- char *color = PERF_COLOR_NORMAL;
-
- /*
- * We color high-overhead entries in red, mid-overhead
- * entries in green - and keep the low overhead places
- * normal:
- */
- if (percent >= 5.0) {
- color = PERF_COLOR_RED;
- } else {
- if (percent >= 0.5)
- color = PERF_COLOR_GREEN;
- }
-
- ret = color_fprintf(fp, color, " %6.2f%%",
+ if (total_samples)
+ ret = percent_color_fprintf(fp, " %6.2f%%",
(self->count * 100.0) / total_samples);
- } else
+ else
ret = fprintf(fp, "%12Ld ", self->count);
list_for_each_entry(se, &hist_entry__sort_list, list) {
@@ -784,6 +982,9 @@
ret += fprintf(fp, "\n");
+ if (callchain)
+ hist_entry_callchain__fprintf(fp, self, total_samples);
+
return ret;
}
@@ -797,7 +998,7 @@
{
struct dso *dso = dsop ? *dsop : NULL;
struct map *map = mapp ? *mapp : NULL;
- uint64_t ip = *ipp;
+ u64 ip = *ipp;
if (!thread)
return NULL;
@@ -814,7 +1015,6 @@
*mapp = map;
got_map:
ip = map->map_ip(map, ip);
- *ipp = ip;
dso = map->dso;
} else {
@@ -828,6 +1028,8 @@
dso = kernel_dso;
}
dprintf(" ...... dso: %s\n", dso ? dso->name : "<not found>");
+ dprintf(" ...... map: %Lx -> %Lx\n", *ipp, ip);
+ *ipp = ip;
if (dsop)
*dsop = dso;
@@ -846,6 +1048,58 @@
return 0;
}
+static struct symbol **
+resolve_callchain(struct thread *thread, struct map *map __used,
+ struct ip_callchain *chain, struct hist_entry *entry)
+{
+ u64 context = PERF_CONTEXT_MAX;
+ struct symbol **syms = NULL;
+ unsigned int i;
+
+ if (callchain) {
+ syms = calloc(chain->nr, sizeof(*syms));
+ if (!syms) {
+ fprintf(stderr, "Can't allocate memory for symbols\n");
+ exit(-1);
+ }
+ }
+
+ for (i = 0; i < chain->nr; i++) {
+ u64 ip = chain->ips[i];
+ struct dso *dso = NULL;
+ struct symbol *sym;
+
+ if (ip >= PERF_CONTEXT_MAX) {
+ context = ip;
+ continue;
+ }
+
+ switch (context) {
+ case PERF_CONTEXT_HV:
+ dso = hypervisor_dso;
+ break;
+ case PERF_CONTEXT_KERNEL:
+ dso = kernel_dso;
+ break;
+ default:
+ break;
+ }
+
+ sym = resolve_symbol(thread, NULL, &dso, &ip);
+
+ if (sym) {
+ if (sort__has_parent && call__match(sym) &&
+ !entry->parent)
+ entry->parent = sym;
+ if (!callchain)
+ break;
+ syms[i] = sym;
+ }
+ }
+
+ return syms;
+}
+
/*
* collect histogram counts
*/
@@ -858,6 +1112,7 @@
struct rb_node **p = &hist.rb_node;
struct rb_node *parent = NULL;
struct hist_entry *he;
+ struct symbol **syms = NULL;
struct hist_entry entry = {
.thread = thread,
.map = map,
@@ -867,39 +1122,12 @@
.level = level,
.count = count,
.parent = NULL,
+ .sorted_chain = RB_ROOT
};
int cmp;
- if (sort__has_parent && chain) {
- u64 context = PERF_CONTEXT_MAX;
- int i;
-
- for (i = 0; i < chain->nr; i++) {
- u64 ip = chain->ips[i];
- struct dso *dso = NULL;
- struct symbol *sym;
-
- if (ip >= PERF_CONTEXT_MAX) {
- context = ip;
- continue;
- }
-
- switch (context) {
- case PERF_CONTEXT_KERNEL:
- dso = kernel_dso;
- break;
- default:
- break;
- }
-
- sym = resolve_symbol(thread, NULL, &dso, &ip);
-
- if (sym && call__match(sym)) {
- entry.parent = sym;
- break;
- }
- }
- }
+ if ((sort__has_parent || callchain) && chain)
+ syms = resolve_callchain(thread, map, chain, &entry);
while (*p != NULL) {
parent = *p;
@@ -909,6 +1137,10 @@
if (!cmp) {
he->count += count;
+ if (callchain) {
+ append_chain(&he->callchain, chain, syms);
+ free(syms);
+ }
return 0;
}
@@ -922,6 +1154,11 @@
if (!he)
return -ENOMEM;
*he = entry;
+ if (callchain) {
+ callchain_init(&he->callchain);
+ append_chain(&he->callchain, chain, syms);
+ free(syms);
+ }
rb_link_node(&he->rb_node, parent, p);
rb_insert_color(&he->rb_node, &hist);
@@ -992,12 +1229,16 @@
static struct rb_root output_hists;
-static void output__insert_entry(struct hist_entry *he)
+static void output__insert_entry(struct hist_entry *he, u64 min_callchain_hits)
{
struct rb_node **p = &output_hists.rb_node;
struct rb_node *parent = NULL;
struct hist_entry *iter;
+ if (callchain)
+ callchain_param.sort(&he->sorted_chain, &he->callchain,
+ min_callchain_hits, &callchain_param);
+
while (*p != NULL) {
parent = *p;
iter = rb_entry(parent, struct hist_entry, rb_node);
@@ -1012,11 +1253,14 @@
rb_insert_color(&he->rb_node, &output_hists);
}
-static void output__resort(void)
+static void output__resort(u64 total_samples)
{
struct rb_node *next;
struct hist_entry *n;
struct rb_root *tree = &hist;
+ u64 min_callchain_hits;
+
+ min_callchain_hits = total_samples * (callchain_param.min_percent / 100);
if (sort__need_collapse)
tree = &collapse_hists;
@@ -1028,7 +1272,7 @@
next = rb_next(&n->rb_node);
rb_erase(&n->rb_node, tree);
- output__insert_entry(n);
+ output__insert_entry(n, min_callchain_hits);
}
}
@@ -1054,7 +1298,7 @@
fprintf(fp, "# ........");
list_for_each_entry(se, &hist_entry__sort_list, list) {
- int i;
+ unsigned int i;
if (exclude_other && (se == &sort_parent))
continue;
@@ -1115,7 +1359,7 @@
}
static int
-process_overflow_event(event_t *event, unsigned long offset, unsigned long head)
+process_sample_event(event_t *event, unsigned long offset, unsigned long head)
{
char level;
int show = 0;
@@ -1126,13 +1370,14 @@
struct map *map = NULL;
void *more_data = event->ip.__more_data;
struct ip_callchain *chain = NULL;
+ int cpumode;
- if (event->header.type & PERF_SAMPLE_PERIOD) {
+ if (sample_type & PERF_SAMPLE_PERIOD) {
period = *(u64 *)more_data;
more_data += sizeof(u64);
}
- dprintf("%p [%p]: PERF_EVENT (IP, %d): %d: %p period: %Ld\n",
+ dprintf("%p [%p]: PERF_EVENT_SAMPLE (IP, %d): %d: %p period: %Ld\n",
(void *)(offset + head),
(void *)(long)(event->header.size),
event->header.misc,
@@ -1140,8 +1385,8 @@
(void *)(long)ip,
(long long)period);
- if (event->header.type & PERF_SAMPLE_CALLCHAIN) {
- int i;
+ if (sample_type & PERF_SAMPLE_CALLCHAIN) {
+ unsigned int i;
chain = (void *)more_data;
@@ -1166,7 +1411,12 @@
return -1;
}
- if (event->header.misc & PERF_EVENT_MISC_KERNEL) {
+ if (comm_list && !strlist__has_entry(comm_list, thread->comm))
+ return 0;
+
+ cpumode = event->header.misc & PERF_EVENT_MISC_CPUMODE_MASK;
+
+ if (cpumode == PERF_EVENT_MISC_KERNEL) {
show = SHOW_KERNEL;
level = 'k';
@@ -1174,7 +1424,7 @@
dprintf(" ...... dso: %s\n", dso->name);
- } else if (event->header.misc & PERF_EVENT_MISC_USER) {
+ } else if (cpumode == PERF_EVENT_MISC_USER) {
show = SHOW_USER;
level = '.';
@@ -1182,12 +1432,21 @@
} else {
show = SHOW_HV;
level = 'H';
+
+ dso = hypervisor_dso;
+
dprintf(" ...... dso: [hypervisor]\n");
}
if (show & show_mask) {
struct symbol *sym = resolve_symbol(thread, &map, &dso, &ip);
+ if (dso_list && dso && dso->name && !strlist__has_entry(dso_list, dso->name))
+ return 0;
+
+ if (sym_list && sym && !strlist__has_entry(sym_list, sym->name))
+ return 0;
+
if (hist_entry__add(thread, map, dso, sym, ip, chain, level, period)) {
eprintf("problem incrementing symbol count, skipping event\n");
return -1;
@@ -1328,14 +1587,27 @@
}
static int
+process_read_event(event_t *event, unsigned long offset, unsigned long head)
+{
+ dprintf("%p [%p]: PERF_EVENT_READ: %d %d %Lu\n",
+ (void *)(offset + head),
+ (void *)(long)(event->header.size),
+ event->read.pid,
+ event->read.tid,
+ event->read.value);
+
+ return 0;
+}
+
+static int
process_event(event_t *event, unsigned long offset, unsigned long head)
{
trace_event(event);
- if (event->header.misc & PERF_EVENT_MISC_OVERFLOW)
- return process_overflow_event(event, offset, head);
-
switch (event->header.type) {
+ case PERF_EVENT_SAMPLE:
+ return process_sample_event(event, offset, head);
+
case PERF_EVENT_MMAP:
return process_mmap_event(event, offset, head);
@@ -1351,6 +1623,9 @@
case PERF_EVENT_LOST:
return process_lost_event(event, offset, head);
+ case PERF_EVENT_READ:
+ return process_read_event(event, offset, head);
+
/*
* We dont process them right now but they are fine:
*/
@@ -1366,13 +1641,30 @@
return 0;
}
-static struct perf_file_header file_header;
+static struct perf_header *header;
+
+static u64 perf_header__sample_type(void)
+{
+ u64 sample_type = 0;
+ int i;
+
+ for (i = 0; i < header->attrs; i++) {
+ struct perf_header_attr *attr = header->attr[i];
+
+ if (!sample_type)
+ sample_type = attr->attr.sample_type;
+ else if (sample_type != attr->attr.sample_type)
+ die("non matching sample_type");
+ }
+
+ return sample_type;
+}
static int __cmd_report(void)
{
int ret, rc = EXIT_FAILURE;
unsigned long offset = 0;
- unsigned long head = sizeof(file_header);
+ unsigned long head, shift;
struct stat stat;
event_t *event;
uint32_t size;
@@ -1400,15 +1692,24 @@
exit(0);
}
- if (read(input, &file_header, sizeof(file_header)) == -1) {
- perror("failed to read file headers");
- exit(-1);
- }
+ header = perf_header__read(input);
+ head = header->data_offset;
- if (sort__has_parent &&
- !(file_header.sample_type & PERF_SAMPLE_CALLCHAIN)) {
- fprintf(stderr, "selected --sort parent, but no callchain data\n");
- exit(-1);
+ sample_type = perf_header__sample_type();
+
+ if (!(sample_type & PERF_SAMPLE_CALLCHAIN)) {
+ if (sort__has_parent) {
+ fprintf(stderr, "selected --sort parent, but no"
+ " callchain data. Did you call"
+ " perf record without -g?\n");
+ exit(-1);
+ }
+ if (callchain) {
+ fprintf(stderr, "selected -c but no callchain data."
+ " Did you call perf record without"
+ " -g?\n");
+ exit(-1);
+ }
}
if (load_kernel() < 0) {
@@ -1426,6 +1727,11 @@
cwd = NULL;
cwdlen = 0;
}
+
+ shift = page_size * (head / page_size);
+ offset += shift;
+ head -= shift;
+
remap:
buf = (char *)mmap(NULL, page_size * mmap_window, PROT_READ,
MAP_SHARED, input, offset);
@@ -1442,9 +1748,10 @@
size = 8;
if (head + event->header.size >= page_size * mmap_window) {
- unsigned long shift = page_size * (head / page_size);
int ret;
+ shift = page_size * (head / page_size);
+
ret = munmap(buf, page_size * mmap_window);
assert(ret == 0);
@@ -1482,10 +1789,10 @@
head += size;
- if (offset + head >= sizeof(file_header) + file_header.data_size)
+ if (offset + head >= header->data_offset + header->data_size)
goto done;
- if (offset + head < stat.st_size)
+ if (offset + head < (unsigned long)stat.st_size)
goto more;
done:
@@ -1509,12 +1816,58 @@
dsos__fprintf(stdout);
collapse__resort();
- output__resort();
+ output__resort(total);
output__fprintf(stdout, total);
return rc;
}
+static int
+parse_callchain_opt(const struct option *opt __used, const char *arg,
+ int unset __used)
+{
+ char *tok;
+ char *endptr;
+
+ callchain = 1;
+
+ if (!arg)
+ return 0;
+
+ tok = strtok((char *)arg, ",");
+ if (!tok)
+ return -1;
+
+ /* get the output mode */
+ if (!strncmp(tok, "graph", strlen(arg)))
+ callchain_param.mode = CHAIN_GRAPH_ABS;
+
+ else if (!strncmp(tok, "flat", strlen(arg)))
+ callchain_param.mode = CHAIN_FLAT;
+
+ else if (!strncmp(tok, "fractal", strlen(arg)))
+ callchain_param.mode = CHAIN_GRAPH_REL;
+
+ else
+ return -1;
+
+ /* get the min percentage */
+ tok = strtok(NULL, ",");
+ if (!tok)
+ goto setup;
+
+ callchain_param.min_percent = strtod(tok, &endptr);
+ if (tok == endptr)
+ return -1;
+
+setup:
+ if (register_callchain_param(&callchain_param) < 0) {
+ fprintf(stderr, "Can't register callchain params\n");
+ return -1;
+ }
+ return 0;
+}
+
static const char * const report_usage[] = {
"perf report [<options>] <command>",
NULL
@@ -1528,6 +1881,8 @@
OPT_BOOLEAN('D', "dump-raw-trace", &dump_trace,
"dump raw trace in ASCII"),
OPT_STRING('k', "vmlinux", &vmlinux, "file", "vmlinux pathname"),
+ OPT_BOOLEAN('m', "modules", &modules,
+ "load module symbols - WARNING: use only with -k and LIVE kernel"),
OPT_STRING('s', "sort", &sort_order, "key[,key2...]",
"sort by key(s): pid, comm, dso, symbol, parent"),
OPT_BOOLEAN('P', "full-paths", &full_paths,
@@ -1536,6 +1891,15 @@
"regex filter to identify parent, see: '--sort parent'"),
OPT_BOOLEAN('x', "exclude-other", &exclude_other,
"Only display entries with parent-match"),
+ OPT_CALLBACK_DEFAULT('c', "callchain", NULL, "output_type,min_percent",
+ "Display callchains using output_type and min percent threshold. "
+ "Default: flat,0", &parse_callchain_opt, callchain_default_opt),
+ OPT_STRING('d', "dsos", &dso_list_str, "dso[,dso...]",
+ "only consider symbols in these dsos"),
+ OPT_STRING('C', "comms", &comm_list_str, "comm[,comm...]",
+ "only consider symbols in these comms"),
+ OPT_STRING('S', "symbols", &sym_list_str, "symbol[,symbol...]",
+ "only consider these symbols"),
OPT_END()
};
@@ -1554,7 +1918,20 @@
free(str);
}
-int cmd_report(int argc, const char **argv, const char *prefix)
+static void setup_list(struct strlist **list, const char *list_str,
+ const char *list_name)
+{
+ if (list_str) {
+ *list = strlist__new(true, list_str);
+ if (!*list) {
+ fprintf(stderr, "problems parsing %s list\n",
+ list_name);
+ exit(129);
+ }
+ }
+}
+
+int cmd_report(int argc, const char **argv, const char *prefix __used)
{
symbol__init();
@@ -1575,6 +1952,10 @@
if (argc)
usage_with_options(report_usage, options);
+ setup_list(&dso_list, dso_list_str, "dso");
+ setup_list(&comm_list, comm_list_str, "comm");
+ setup_list(&sym_list, sym_list_str, "symbol");
+
setup_pager();
return __cmd_report();
diff --git a/tools/perf/builtin-stat.c b/tools/perf/builtin-stat.c
index 6d3eeac..27921a8 100644
--- a/tools/perf/builtin-stat.c
+++ b/tools/perf/builtin-stat.c
@@ -32,6 +32,7 @@
* Wu Fengguang <fengguang.wu@intel.com>
* Mike Galbraith <efault@gmx.de>
* Paul Mackerras <paulus@samba.org>
+ * Jaswinder Singh Rajput <jaswinder@kernel.org>
*
* Released under the GPL v2. (and only v2, not any later version)
*/
@@ -45,7 +46,7 @@
#include <sys/prctl.h>
#include <math.h>
-static struct perf_counter_attr default_attrs[MAX_COUNTERS] = {
+static struct perf_counter_attr default_attrs[] = {
{ .type = PERF_TYPE_SOFTWARE, .config = PERF_COUNT_SW_TASK_CLOCK },
{ .type = PERF_TYPE_SOFTWARE, .config = PERF_COUNT_SW_CONTEXT_SWITCHES},
@@ -59,42 +60,28 @@
};
+#define MAX_RUN 100
+
static int system_wide = 0;
-static int inherit = 1;
static int verbose = 0;
+static unsigned int nr_cpus = 0;
+static int run_idx = 0;
+
+static int run_count = 1;
+static int inherit = 1;
+static int scale = 1;
+static int target_pid = -1;
+static int null_run = 0;
static int fd[MAX_NR_CPUS][MAX_COUNTERS];
-static int target_pid = -1;
-static int nr_cpus = 0;
-static unsigned int page_size;
-
-static int scale = 1;
-
-static const unsigned int default_count[] = {
- 1000000,
- 1000000,
- 10000,
- 10000,
- 1000000,
- 10000,
-};
-
-#define MAX_RUN 100
-
-static int run_count = 1;
-static int run_idx = 0;
-
-static u64 event_res[MAX_RUN][MAX_COUNTERS][3];
-static u64 event_scaled[MAX_RUN][MAX_COUNTERS];
-
-//static u64 event_hist[MAX_RUN][MAX_COUNTERS][3];
-
-
static u64 runtime_nsecs[MAX_RUN];
static u64 walltime_nsecs[MAX_RUN];
static u64 runtime_cycles[MAX_RUN];
+static u64 event_res[MAX_RUN][MAX_COUNTERS][3];
+static u64 event_scaled[MAX_RUN][MAX_COUNTERS];
+
static u64 event_res_avg[MAX_COUNTERS][3];
static u64 event_res_noise[MAX_COUNTERS][3];
@@ -109,7 +96,14 @@
static u64 runtime_cycles_avg;
static u64 runtime_cycles_noise;
-static void create_perf_stat_counter(int counter)
+#define MATCH_EVENT(t, c, counter) \
+ (attrs[counter].type == PERF_TYPE_##t && \
+ attrs[counter].config == PERF_COUNT_##c)
+
+#define ERR_PERF_OPEN \
+"Error: counter %d, sys_perf_counter_open() syscall returned with %d (%s)\n"
+
+static void create_perf_stat_counter(int counter, int pid)
{
struct perf_counter_attr *attr = attrs + counter;
@@ -118,21 +112,23 @@
PERF_FORMAT_TOTAL_TIME_RUNNING;
if (system_wide) {
- int cpu;
- for (cpu = 0; cpu < nr_cpus; cpu ++) {
+ unsigned int cpu;
+
+ for (cpu = 0; cpu < nr_cpus; cpu++) {
fd[cpu][counter] = sys_perf_counter_open(attr, -1, cpu, -1, 0);
- if (fd[cpu][counter] < 0 && verbose) {
- printf("Error: counter %d, sys_perf_counter_open() syscall returned with %d (%s)\n", counter, fd[cpu][counter], strerror(errno));
- }
+ if (fd[cpu][counter] < 0 && verbose)
+ fprintf(stderr, ERR_PERF_OPEN, counter,
+ fd[cpu][counter], strerror(errno));
}
} else {
- attr->inherit = inherit;
- attr->disabled = 1;
+ attr->inherit = inherit;
+ attr->disabled = 1;
+ attr->enable_on_exec = 1;
- fd[0][counter] = sys_perf_counter_open(attr, 0, -1, -1, 0);
- if (fd[0][counter] < 0 && verbose) {
- printf("Error: counter %d, sys_perf_counter_open() syscall returned with %d (%s)\n", counter, fd[0][counter], strerror(errno));
- }
+ fd[0][counter] = sys_perf_counter_open(attr, pid, -1, -1, 0);
+ if (fd[0][counter] < 0 && verbose)
+ fprintf(stderr, ERR_PERF_OPEN, counter,
+ fd[0][counter], strerror(errno));
}
}
@@ -141,13 +137,8 @@
*/
static inline int nsec_counter(int counter)
{
- if (attrs[counter].type != PERF_TYPE_SOFTWARE)
- return 0;
-
- if (attrs[counter].config == PERF_COUNT_SW_CPU_CLOCK)
- return 1;
-
- if (attrs[counter].config == PERF_COUNT_SW_TASK_CLOCK)
+ if (MATCH_EVENT(SOFTWARE, SW_CPU_CLOCK, counter) ||
+ MATCH_EVENT(SOFTWARE, SW_TASK_CLOCK, counter))
return 1;
return 0;
@@ -159,8 +150,8 @@
static void read_counter(int counter)
{
u64 *count, single_count[3];
- ssize_t res;
- int cpu, nv;
+ unsigned int cpu;
+ size_t res, nv;
int scaled;
count = event_res[run_idx][counter];
@@ -168,12 +159,13 @@
count[0] = count[1] = count[2] = 0;
nv = scale ? 3 : 1;
- for (cpu = 0; cpu < nr_cpus; cpu ++) {
+ for (cpu = 0; cpu < nr_cpus; cpu++) {
if (fd[cpu][counter] < 0)
continue;
res = read(fd[cpu][counter], single_count, nv * sizeof(u64));
assert(res == nv * sizeof(u64));
+
close(fd[cpu][counter]);
fd[cpu][counter] = -1;
@@ -201,46 +193,81 @@
/*
* Save the full runtime - to allow normalization during printout:
*/
- if (attrs[counter].type == PERF_TYPE_SOFTWARE &&
- attrs[counter].config == PERF_COUNT_SW_TASK_CLOCK)
+ if (MATCH_EVENT(SOFTWARE, SW_TASK_CLOCK, counter))
runtime_nsecs[run_idx] = count[0];
- if (attrs[counter].type == PERF_TYPE_HARDWARE &&
- attrs[counter].config == PERF_COUNT_HW_CPU_CYCLES)
+ if (MATCH_EVENT(HARDWARE, HW_CPU_CYCLES, counter))
runtime_cycles[run_idx] = count[0];
}
-static int run_perf_stat(int argc, const char **argv)
+static int run_perf_stat(int argc __used, const char **argv)
{
unsigned long long t0, t1;
int status = 0;
int counter;
int pid;
+ int child_ready_pipe[2], go_pipe[2];
+ char buf;
if (!system_wide)
nr_cpus = 1;
- for (counter = 0; counter < nr_counters; counter++)
- create_perf_stat_counter(counter);
-
- /*
- * Enable counters and exec the command:
- */
- t0 = rdclock();
- prctl(PR_TASK_PERF_COUNTERS_ENABLE);
+ if (pipe(child_ready_pipe) < 0 || pipe(go_pipe) < 0) {
+ perror("failed to create pipes");
+ exit(1);
+ }
if ((pid = fork()) < 0)
perror("failed to fork");
if (!pid) {
- if (execvp(argv[0], (char **)argv)) {
- perror(argv[0]);
- exit(-1);
- }
+ close(child_ready_pipe[0]);
+ close(go_pipe[1]);
+ fcntl(go_pipe[0], F_SETFD, FD_CLOEXEC);
+
+ /*
+ * Do a dummy execvp to get the PLT entry resolved,
+ * so we avoid the resolver overhead on the real
+ * execvp call.
+ */
+ execvp("", (char **)argv);
+
+ /*
+ * Tell the parent we're ready to go
+ */
+ close(child_ready_pipe[1]);
+
+ /*
+ * Wait until the parent tells us to go.
+ */
+ if (read(go_pipe[0], &buf, 1) == -1)
+ perror("unable to read pipe");
+
+ execvp(argv[0], (char **)argv);
+
+ perror(argv[0]);
+ exit(-1);
}
+ /*
+ * Wait for the child to be ready to exec.
+ */
+ close(child_ready_pipe[1]);
+ close(go_pipe[0]);
+ if (read(child_ready_pipe[0], &buf, 1) == -1)
+ perror("unable to read pipe");
+ close(child_ready_pipe[0]);
+
+ for (counter = 0; counter < nr_counters; counter++)
+ create_perf_stat_counter(counter, pid);
+
+ /*
+ * Enable counters and exec the command:
+ */
+ t0 = rdclock();
+
+ close(go_pipe[1]);
wait(&status);
- prctl(PR_TASK_PERF_COUNTERS_DISABLE);
t1 = rdclock();
walltime_nsecs[run_idx] = t1 - t0;
@@ -262,11 +289,9 @@
{
double msecs = (double)count[0] / 1000000;
- fprintf(stderr, " %14.6f %-20s", msecs, event_name(counter));
+ fprintf(stderr, " %14.6f %-24s", msecs, event_name(counter));
- if (attrs[counter].type == PERF_TYPE_SOFTWARE &&
- attrs[counter].config == PERF_COUNT_SW_TASK_CLOCK) {
-
+ if (MATCH_EVENT(SOFTWARE, SW_TASK_CLOCK, counter)) {
if (walltime_nsecs_avg)
fprintf(stderr, " # %10.3f CPUs ",
(double)count[0] / (double)walltime_nsecs_avg);
@@ -276,12 +301,10 @@
static void abs_printout(int counter, u64 *count, u64 *noise)
{
- fprintf(stderr, " %14Ld %-20s", count[0], event_name(counter));
+ fprintf(stderr, " %14Ld %-24s", count[0], event_name(counter));
if (runtime_cycles_avg &&
- attrs[counter].type == PERF_TYPE_HARDWARE &&
- attrs[counter].config == PERF_COUNT_HW_INSTRUCTIONS) {
-
+ MATCH_EVENT(HARDWARE, HW_INSTRUCTIONS, counter)) {
fprintf(stderr, " # %10.3f IPC ",
(double)count[0] / (double)runtime_cycles_avg);
} else {
@@ -306,7 +329,7 @@
scaled = event_scaled_avg[counter];
if (scaled == -1) {
- fprintf(stderr, " %14s %-20s\n",
+ fprintf(stderr, " %14s %-24s\n",
"<not counted>", event_name(counter));
return;
}
@@ -364,8 +387,11 @@
event_res_avg[j]+1, event_res[i][j]+1);
update_avg("counter/2", j,
event_res_avg[j]+2, event_res[i][j]+2);
- update_avg("scaled", j,
- event_scaled_avg + j, event_scaled[i]+j);
+ if (event_scaled[i][j] != (u64)-1)
+ update_avg("scaled", j,
+ event_scaled_avg + j, event_scaled[i]+j);
+ else
+ event_scaled_avg[j] = -1;
}
}
runtime_nsecs_avg /= run_count;
@@ -429,11 +455,14 @@
for (counter = 0; counter < nr_counters; counter++)
print_counter(counter);
-
fprintf(stderr, "\n");
- fprintf(stderr, " %14.9f seconds time elapsed.\n",
+ fprintf(stderr, " %14.9f seconds time elapsed",
(double)walltime_nsecs_avg/1e9);
- fprintf(stderr, "\n");
+ if (run_count > 1) {
+ fprintf(stderr, " ( +- %7.3f%% )",
+ 100.0*(double)walltime_nsecs_noise/(double)walltime_nsecs_avg);
+ }
+ fprintf(stderr, "\n\n");
}
static volatile int signr = -1;
@@ -466,36 +495,37 @@
OPT_INTEGER('p', "pid", &target_pid,
"stat events on existing pid"),
OPT_BOOLEAN('a', "all-cpus", &system_wide,
- "system-wide collection from all CPUs"),
+ "system-wide collection from all CPUs"),
OPT_BOOLEAN('S', "scale", &scale,
- "scale/normalize counters"),
+ "scale/normalize counters"),
OPT_BOOLEAN('v', "verbose", &verbose,
"be more verbose (show counter open errors, etc)"),
OPT_INTEGER('r', "repeat", &run_count,
"repeat command and print average + stddev (max: 100)"),
+ OPT_BOOLEAN('n', "null", &null_run,
+ "null run - dont start any counters"),
OPT_END()
};
-int cmd_stat(int argc, const char **argv, const char *prefix)
+int cmd_stat(int argc, const char **argv, const char *prefix __used)
{
int status;
- page_size = sysconf(_SC_PAGE_SIZE);
-
- memcpy(attrs, default_attrs, sizeof(attrs));
-
argc = parse_options(argc, argv, options, stat_usage, 0);
if (!argc)
usage_with_options(stat_usage, options);
if (run_count <= 0 || run_count > MAX_RUN)
usage_with_options(stat_usage, options);
- if (!nr_counters)
- nr_counters = 8;
+ /* Set attrs and nr_counters if no event is selected and !null_run */
+ if (!null_run && !nr_counters) {
+ memcpy(attrs, default_attrs, sizeof(default_attrs));
+ nr_counters = ARRAY_SIZE(default_attrs);
+ }
nr_cpus = sysconf(_SC_NPROCESSORS_ONLN);
assert(nr_cpus <= MAX_NR_CPUS);
- assert(nr_cpus >= 0);
+ assert((int)nr_cpus >= 0);
/*
* We dont want to block the signals - that would cause
@@ -511,7 +541,7 @@
status = 0;
for (run_idx = 0; run_idx < run_count; run_idx++) {
if (run_count != 1 && verbose)
- fprintf(stderr, "[ perf stat: executing run #%d ... ]\n", run_idx+1);
+ fprintf(stderr, "[ perf stat: executing run #%d ... ]\n", run_idx + 1);
status = run_perf_stat(argc, argv);
}
diff --git a/tools/perf/builtin-top.c b/tools/perf/builtin-top.c
index 5352b5e..95d5c0a 100644
--- a/tools/perf/builtin-top.c
+++ b/tools/perf/builtin-top.c
@@ -23,7 +23,7 @@
#include "util/symbol.h"
#include "util/color.h"
#include "util/util.h"
-#include "util/rbtree.h"
+#include <linux/rbtree.h>
#include "util/parse-options.h"
#include "util/parse-events.h"
@@ -66,6 +66,7 @@
static unsigned int mmap_pages = 16;
static int freq = 0;
static int verbose = 0;
+static char *vmlinux = NULL;
static char *sym_filter;
static unsigned long filter_start;
@@ -238,7 +239,6 @@
for (nd = rb_first(&tmp); nd; nd = rb_next(nd)) {
struct sym_entry *syme = rb_entry(nd, struct sym_entry, rb_node);
struct symbol *sym = (struct symbol *)(syme + 1);
- char *color = PERF_COLOR_NORMAL;
double pcnt;
if (++printed > print_entries || syme->snap_count < count_filter)
@@ -247,29 +247,20 @@
pcnt = 100.0 - (100.0 * ((sum_ksamples - syme->snap_count) /
sum_ksamples));
- /*
- * We color high-overhead entries in red, mid-overhead
- * entries in green - and keep the low overhead places
- * normal:
- */
- if (pcnt >= 5.0) {
- color = PERF_COLOR_RED;
- } else {
- if (pcnt >= 0.5)
- color = PERF_COLOR_GREEN;
- }
-
if (nr_counters == 1)
printf("%20.2f - ", syme->weight);
else
printf("%9.1f %10ld - ", syme->weight, syme->snap_count);
- color_fprintf(stdout, color, "%4.1f%%", pcnt);
- printf(" - %016llx : %s\n", sym->start, sym->name);
+ percent_color_fprintf(stdout, "%4.1f%%", pcnt);
+ printf(" - %016llx : %s", sym->start, sym->name);
+ if (sym->module)
+ printf("\t[%s]", sym->module->name);
+ printf("\n");
}
}
-static void *display_thread(void *arg)
+static void *display_thread(void *arg __used)
{
struct pollfd stdin_poll = { .fd = 0, .events = POLLIN };
int delay_msecs = delay_secs * 1000;
@@ -286,11 +277,31 @@
return NULL;
}
+/* Tag samples to be skipped. */
+static const char *skip_symbols[] = {
+ "default_idle",
+ "cpu_idle",
+ "enter_idle",
+ "exit_idle",
+ "mwait_idle",
+ "ppc64_runlatch_off",
+ "pseries_dedicated_idle_sleep",
+ NULL
+};
+
static int symbol_filter(struct dso *self, struct symbol *sym)
{
static int filter_match;
struct sym_entry *syme;
const char *name = sym->name;
+ int i;
+
+ /*
+ * ppc64 uses function descriptors and appends a '.' to the
+ * start of every instruction address. Remove it.
+ */
+ if (name[0] == '.')
+ name++;
if (!strcmp(name, "_text") ||
!strcmp(name, "_etext") ||
@@ -302,13 +313,12 @@
return 1;
syme = dso__sym_priv(self, sym);
- /* Tag samples to be skipped. */
- if (!strcmp("default_idle", name) ||
- !strcmp("cpu_idle", name) ||
- !strcmp("enter_idle", name) ||
- !strcmp("exit_idle", name) ||
- !strcmp("mwait_idle", name))
- syme->skip = 1;
+ for (i = 0; skip_symbols[i]; i++) {
+ if (!strcmp(skip_symbols[i], name)) {
+ syme->skip = 1;
+ break;
+ }
+ }
if (filter_match == 1) {
filter_end = sym->start;
@@ -340,12 +350,13 @@
{
struct rb_node *node;
struct symbol *sym;
+ int modules = vmlinux ? 1 : 0;
kernel_dso = dso__new("[kernel]", sizeof(struct sym_entry));
if (kernel_dso == NULL)
return -1;
- if (dso__load_kernel(kernel_dso, NULL, symbol_filter, 1) != 0)
+ if (dso__load_kernel(kernel_dso, vmlinux, symbol_filter, verbose, modules) <= 0)
goto out_delete_dso;
node = rb_first(&kernel_dso->syms);
@@ -392,11 +403,11 @@
samples--;
}
-static void process_event(u64 ip, int counter)
+static void process_event(u64 ip, int counter, int user)
{
samples++;
- if (ip < min_ip || ip > max_ip) {
+ if (user) {
userspace_samples++;
return;
}
@@ -407,7 +418,7 @@
struct mmap_data {
int counter;
void *base;
- unsigned int mask;
+ int mask;
unsigned int prev;
};
@@ -509,9 +520,10 @@
old += size;
- if (event->header.misc & PERF_EVENT_MISC_OVERFLOW) {
- if (event->header.type & PERF_SAMPLE_IP)
- process_event(event->ip.ip, md->counter);
+ if (event->header.type == PERF_EVENT_SAMPLE) {
+ int user =
+ (event->header.misc & PERF_EVENT_MISC_CPUMODE_MASK) == PERF_EVENT_MISC_USER;
+ process_event(event->ip.ip, md->counter, user);
}
}
@@ -660,6 +672,7 @@
"system-wide collection from all CPUs"),
OPT_INTEGER('C', "CPU", &profile_cpu,
"CPU to profile on"),
+ OPT_STRING('k', "vmlinux", &vmlinux, "file", "vmlinux pathname"),
OPT_INTEGER('m', "mmap-pages", &mmap_pages,
"number of mmap data pages"),
OPT_INTEGER('r', "realtime", &realtime_prio,
@@ -674,7 +687,7 @@
"put the counters into a counter group"),
OPT_STRING('s', "sym-filter", &sym_filter, "pattern",
"only display symbols matchig this pattern"),
- OPT_BOOLEAN('z', "zero", &group,
+ OPT_BOOLEAN('z', "zero", &zero,
"zero history across updates"),
OPT_INTEGER('F', "freq", &freq,
"profile at this frequency"),
@@ -685,10 +698,12 @@
OPT_END()
};
-int cmd_top(int argc, const char **argv, const char *prefix)
+int cmd_top(int argc, const char **argv, const char *prefix __used)
{
int counter;
+ symbol__init();
+
page_size = sysconf(_SC_PAGE_SIZE);
argc = parse_options(argc, argv, options, top_usage, 0);
diff --git a/tools/perf/perf.c b/tools/perf/perf.c
index 4eb7259..c565678 100644
--- a/tools/perf/perf.c
+++ b/tools/perf/perf.c
@@ -229,9 +229,6 @@
use_pager = 1;
commit_pager_choice();
- if (p->option & NEED_WORK_TREE)
- /* setup_work_tree() */;
-
status = p->fn(argc, argv, prefix);
if (status)
return status & 0xff;
@@ -266,7 +263,7 @@
{ "annotate", cmd_annotate, 0 },
{ "version", cmd_version, 0 },
};
- int i;
+ unsigned int i;
static const char ext[] = STRIP_EXTENSION;
if (sizeof(ext) > 1) {
diff --git a/tools/perf/perf.h b/tools/perf/perf.h
index ceb68aa..63e67cc 100644
--- a/tools/perf/perf.h
+++ b/tools/perf/perf.h
@@ -19,13 +19,29 @@
#define cpu_relax() asm volatile("" ::: "memory");
#endif
+#ifdef __sh__
+#include "../../arch/sh/include/asm/unistd.h"
+#if defined(__SH4A__) || defined(__SH5__)
+# define rmb() asm volatile("synco" ::: "memory")
+#else
+# define rmb() asm volatile("" ::: "memory")
+#endif
+#define cpu_relax() asm volatile("" ::: "memory")
+#endif
+
+#ifdef __hppa__
+#include "../../arch/parisc/include/asm/unistd.h"
+#define rmb() asm volatile("" ::: "memory")
+#define cpu_relax() asm volatile("" ::: "memory");
+#endif
+
#include <time.h>
#include <unistd.h>
#include <sys/types.h>
#include <sys/syscall.h>
#include "../../include/linux/perf_counter.h"
-#include "types.h"
+#include "util/types.h"
/*
* prctl(PR_TASK_PERF_COUNTERS_DISABLE) will (cheaply) disable all
@@ -52,6 +68,8 @@
#define __user
#define asmlinkage
+#define __used __attribute__((__unused__))
+
#define unlikely(x) __builtin_expect(!!(x), 0)
#define min(x, y) ({ \
typeof(x) _min1 = (x); \
@@ -72,10 +90,9 @@
#define MAX_COUNTERS 256
#define MAX_NR_CPUS 256
-struct perf_file_header {
- u64 version;
- u64 sample_type;
- u64 data_size;
+struct ip_callchain {
+ u64 nr;
+ u64 ips[0];
};
#endif
diff --git a/tools/perf/util/alias.c b/tools/perf/util/alias.c
index 9b3dd2b..b8144e8 100644
--- a/tools/perf/util/alias.c
+++ b/tools/perf/util/alias.c
@@ -3,7 +3,7 @@
static const char *alias_key;
static char *alias_val;
-static int alias_lookup_cb(const char *k, const char *v, void *cb)
+static int alias_lookup_cb(const char *k, const char *v, void *cb __used)
{
if (!prefixcmp(k, "alias.") && !strcmp(k+6, alias_key)) {
if (!v)
diff --git a/tools/perf/util/cache.h b/tools/perf/util/cache.h
index 393d614..161d5f4 100644
--- a/tools/perf/util/cache.h
+++ b/tools/perf/util/cache.h
@@ -3,6 +3,7 @@
#include "util.h"
#include "strbuf.h"
+#include "../perf.h"
#define PERF_DIR_ENVIRONMENT "PERF_DIR"
#define PERF_WORK_TREE_ENVIRONMENT "PERF_WORK_TREE"
diff --git a/tools/perf/util/callchain.c b/tools/perf/util/callchain.c
new file mode 100644
index 0000000..9d3c814
--- /dev/null
+++ b/tools/perf/util/callchain.c
@@ -0,0 +1,335 @@
+/*
+ * Copyright (C) 2009, Frederic Weisbecker <fweisbec@gmail.com>
+ *
+ * Handle the callchains from the stream in an ad-hoc radix tree and then
+ * sort them in an rbtree.
+ *
+ * Using a radix for code path provides a fast retrieval and factorizes
+ * memory use. Also that lets us use the paths in a hierarchical graph view.
+ *
+ */
+
+#include <stdlib.h>
+#include <stdio.h>
+#include <stdbool.h>
+#include <errno.h>
+
+#include "callchain.h"
+
+#define chain_for_each_child(child, parent) \
+ list_for_each_entry(child, &parent->children, brothers)
+
+static void
+rb_insert_callchain(struct rb_root *root, struct callchain_node *chain,
+ enum chain_mode mode)
+{
+ struct rb_node **p = &root->rb_node;
+ struct rb_node *parent = NULL;
+ struct callchain_node *rnode;
+
+ while (*p) {
+ parent = *p;
+ rnode = rb_entry(parent, struct callchain_node, rb_node);
+
+ switch (mode) {
+ case CHAIN_FLAT:
+ if (rnode->hit < chain->hit)
+ p = &(*p)->rb_left;
+ else
+ p = &(*p)->rb_right;
+ break;
+ case CHAIN_GRAPH_ABS: /* Falldown */
+ case CHAIN_GRAPH_REL:
+ if (rnode->cumul_hit < chain->cumul_hit)
+ p = &(*p)->rb_left;
+ else
+ p = &(*p)->rb_right;
+ break;
+ default:
+ break;
+ }
+ }
+
+ rb_link_node(&chain->rb_node, parent, p);
+ rb_insert_color(&chain->rb_node, root);
+}
+
+static void
+__sort_chain_flat(struct rb_root *rb_root, struct callchain_node *node,
+ u64 min_hit)
+{
+ struct callchain_node *child;
+
+ chain_for_each_child(child, node)
+ __sort_chain_flat(rb_root, child, min_hit);
+
+ if (node->hit && node->hit >= min_hit)
+ rb_insert_callchain(rb_root, node, CHAIN_FLAT);
+}
+
+/*
+ * Once we get every callchains from the stream, we can now
+ * sort them by hit
+ */
+static void
+sort_chain_flat(struct rb_root *rb_root, struct callchain_node *node,
+ u64 min_hit, struct callchain_param *param __used)
+{
+ __sort_chain_flat(rb_root, node, min_hit);
+}
+
+static void __sort_chain_graph_abs(struct callchain_node *node,
+ u64 min_hit)
+{
+ struct callchain_node *child;
+
+ node->rb_root = RB_ROOT;
+
+ chain_for_each_child(child, node) {
+ __sort_chain_graph_abs(child, min_hit);
+ if (child->cumul_hit >= min_hit)
+ rb_insert_callchain(&node->rb_root, child,
+ CHAIN_GRAPH_ABS);
+ }
+}
+
+static void
+sort_chain_graph_abs(struct rb_root *rb_root, struct callchain_node *chain_root,
+ u64 min_hit, struct callchain_param *param __used)
+{
+ __sort_chain_graph_abs(chain_root, min_hit);
+ rb_root->rb_node = chain_root->rb_root.rb_node;
+}
+
+static void __sort_chain_graph_rel(struct callchain_node *node,
+ double min_percent)
+{
+ struct callchain_node *child;
+ u64 min_hit;
+
+ node->rb_root = RB_ROOT;
+ min_hit = node->cumul_hit * min_percent / 100.0;
+
+ chain_for_each_child(child, node) {
+ __sort_chain_graph_rel(child, min_percent);
+ if (child->cumul_hit >= min_hit)
+ rb_insert_callchain(&node->rb_root, child,
+ CHAIN_GRAPH_REL);
+ }
+}
+
+static void
+sort_chain_graph_rel(struct rb_root *rb_root, struct callchain_node *chain_root,
+ u64 min_hit __used, struct callchain_param *param)
+{
+ __sort_chain_graph_rel(chain_root, param->min_percent);
+ rb_root->rb_node = chain_root->rb_root.rb_node;
+}
+
+int register_callchain_param(struct callchain_param *param)
+{
+ switch (param->mode) {
+ case CHAIN_GRAPH_ABS:
+ param->sort = sort_chain_graph_abs;
+ break;
+ case CHAIN_GRAPH_REL:
+ param->sort = sort_chain_graph_rel;
+ break;
+ case CHAIN_FLAT:
+ param->sort = sort_chain_flat;
+ break;
+ default:
+ return -1;
+ }
+ return 0;
+}
+
+/*
+ * Create a child for a parent. If inherit_children, then the new child
+ * will become the new parent of it's parent children
+ */
+static struct callchain_node *
+create_child(struct callchain_node *parent, bool inherit_children)
+{
+ struct callchain_node *new;
+
+ new = malloc(sizeof(*new));
+ if (!new) {
+ perror("not enough memory to create child for code path tree");
+ return NULL;
+ }
+ new->parent = parent;
+ INIT_LIST_HEAD(&new->children);
+ INIT_LIST_HEAD(&new->val);
+
+ if (inherit_children) {
+ struct callchain_node *next;
+
+ list_splice(&parent->children, &new->children);
+ INIT_LIST_HEAD(&parent->children);
+
+ chain_for_each_child(next, new)
+ next->parent = new;
+ }
+ list_add_tail(&new->brothers, &parent->children);
+
+ return new;
+}
+
+/*
+ * Fill the node with callchain values
+ */
+static void
+fill_node(struct callchain_node *node, struct ip_callchain *chain,
+ int start, struct symbol **syms)
+{
+ unsigned int i;
+
+ for (i = start; i < chain->nr; i++) {
+ struct callchain_list *call;
+
+ call = malloc(sizeof(*call));
+ if (!call) {
+ perror("not enough memory for the code path tree");
+ return;
+ }
+ call->ip = chain->ips[i];
+ call->sym = syms[i];
+ list_add_tail(&call->list, &node->val);
+ }
+ node->val_nr = chain->nr - start;
+ if (!node->val_nr)
+ printf("Warning: empty node in callchain tree\n");
+}
+
+static void
+add_child(struct callchain_node *parent, struct ip_callchain *chain,
+ int start, struct symbol **syms)
+{
+ struct callchain_node *new;
+
+ new = create_child(parent, false);
+ fill_node(new, chain, start, syms);
+
+ new->cumul_hit = new->hit = 1;
+}
+
+/*
+ * Split the parent in two parts (a new child is created) and
+ * give a part of its callchain to the created child.
+ * Then create another child to host the given callchain of new branch
+ */
+static void
+split_add_child(struct callchain_node *parent, struct ip_callchain *chain,
+ struct callchain_list *to_split, int idx_parents, int idx_local,
+ struct symbol **syms)
+{
+ struct callchain_node *new;
+ struct list_head *old_tail;
+ unsigned int idx_total = idx_parents + idx_local;
+
+ /* split */
+ new = create_child(parent, true);
+
+ /* split the callchain and move a part to the new child */
+ old_tail = parent->val.prev;
+ list_del_range(&to_split->list, old_tail);
+ new->val.next = &to_split->list;
+ new->val.prev = old_tail;
+ to_split->list.prev = &new->val;
+ old_tail->next = &new->val;
+
+ /* split the hits */
+ new->hit = parent->hit;
+ new->cumul_hit = parent->cumul_hit;
+ new->val_nr = parent->val_nr - idx_local;
+ parent->val_nr = idx_local;
+
+ /* create a new child for the new branch if any */
+ if (idx_total < chain->nr) {
+ parent->hit = 0;
+ add_child(parent, chain, idx_total, syms);
+ } else {
+ parent->hit = 1;
+ }
+}
+
+static int
+__append_chain(struct callchain_node *root, struct ip_callchain *chain,
+ unsigned int start, struct symbol **syms);
+
+static void
+__append_chain_children(struct callchain_node *root, struct ip_callchain *chain,
+ struct symbol **syms, unsigned int start)
+{
+ struct callchain_node *rnode;
+
+ /* lookup in childrens */
+ chain_for_each_child(rnode, root) {
+ unsigned int ret = __append_chain(rnode, chain, start, syms);
+
+ if (!ret)
+ goto cumul;
+ }
+ /* nothing in children, add to the current node */
+ add_child(root, chain, start, syms);
+
+cumul:
+ root->cumul_hit++;
+}
+
+static int
+__append_chain(struct callchain_node *root, struct ip_callchain *chain,
+ unsigned int start, struct symbol **syms)
+{
+ struct callchain_list *cnode;
+ unsigned int i = start;
+ bool found = false;
+
+ /*
+ * Lookup in the current node
+ * If we have a symbol, then compare the start to match
+ * anywhere inside a function.
+ */
+ list_for_each_entry(cnode, &root->val, list) {
+ if (i == chain->nr)
+ break;
+ if (cnode->sym && syms[i]) {
+ if (cnode->sym->start != syms[i]->start)
+ break;
+ } else if (cnode->ip != chain->ips[i])
+ break;
+ if (!found)
+ found = true;
+ i++;
+ }
+
+ /* matches not, relay on the parent */
+ if (!found)
+ return -1;
+
+ /* we match only a part of the node. Split it and add the new chain */
+ if (i - start < root->val_nr) {
+ split_add_child(root, chain, cnode, start, i - start, syms);
+ return 0;
+ }
+
+ /* we match 100% of the path, increment the hit */
+ if (i - start == root->val_nr && i == chain->nr) {
+ root->hit++;
+ root->cumul_hit++;
+
+ return 0;
+ }
+
+ /* We match the node and still have a part remaining */
+ __append_chain_children(root, chain, syms, i);
+
+ return 0;
+}
+
+void append_chain(struct callchain_node *root, struct ip_callchain *chain,
+ struct symbol **syms)
+{
+ __append_chain_children(root, chain, syms, 0);
+}
diff --git a/tools/perf/util/callchain.h b/tools/perf/util/callchain.h
new file mode 100644
index 0000000..7812122
--- /dev/null
+++ b/tools/perf/util/callchain.h
@@ -0,0 +1,54 @@
+#ifndef __PERF_CALLCHAIN_H
+#define __PERF_CALLCHAIN_H
+
+#include "../perf.h"
+#include <linux/list.h>
+#include <linux/rbtree.h>
+#include "symbol.h"
+
+enum chain_mode {
+ CHAIN_FLAT,
+ CHAIN_GRAPH_ABS,
+ CHAIN_GRAPH_REL
+};
+
+struct callchain_node {
+ struct callchain_node *parent;
+ struct list_head brothers;
+ struct list_head children;
+ struct list_head val;
+ struct rb_node rb_node; /* to sort nodes in an rbtree */
+ struct rb_root rb_root; /* sorted tree of children */
+ unsigned int val_nr;
+ u64 hit;
+ u64 cumul_hit; /* hit + hits of children */
+};
+
+struct callchain_param;
+
+typedef void (*sort_chain_func_t)(struct rb_root *, struct callchain_node *,
+ u64, struct callchain_param *);
+
+struct callchain_param {
+ enum chain_mode mode;
+ double min_percent;
+ sort_chain_func_t sort;
+};
+
+struct callchain_list {
+ u64 ip;
+ struct symbol *sym;
+ struct list_head list;
+};
+
+static inline void callchain_init(struct callchain_node *node)
+{
+ INIT_LIST_HEAD(&node->brothers);
+ INIT_LIST_HEAD(&node->children);
+ INIT_LIST_HEAD(&node->val);
+}
+
+int register_callchain_param(struct callchain_param *param);
+void append_chain(struct callchain_node *root, struct ip_callchain *chain,
+ struct symbol **syms);
+#endif
diff --git a/tools/perf/util/color.c b/tools/perf/util/color.c
index 9a8c20c..90a044d 100644
--- a/tools/perf/util/color.c
+++ b/tools/perf/util/color.c
@@ -11,7 +11,8 @@
};
char *end;
int i;
- for (i = 0; i < ARRAY_SIZE(color_names); i++) {
+
+ for (i = 0; i < (int)ARRAY_SIZE(color_names); i++) {
const char *str = color_names[i];
if (!strncasecmp(name, str, len) && !str[len])
return i - 1;
@@ -28,7 +29,8 @@
static const char * const attr_names[] = {
"bold", "dim", "ul", "blink", "reverse"
};
- int i;
+ unsigned int i;
+
for (i = 0; i < ARRAY_SIZE(attr_names); i++) {
const char *str = attr_names[i];
if (!strncasecmp(name, str, len) && !str[len])
@@ -222,10 +224,12 @@
{
if (!*color)
return fwrite(buf, count, 1, fp) != 1;
+
while (count) {
char *p = memchr(buf, '\n', count);
+
if (p != buf && (fputs(color, fp) < 0 ||
- fwrite(buf, p ? p - buf : count, 1, fp) != 1 ||
+ fwrite(buf, p ? (size_t)(p - buf) : count, 1, fp) != 1 ||
fputs(PERF_COLOR_RESET, fp) < 0))
return -1;
if (!p)
@@ -238,4 +242,31 @@
return 0;
}
+char *get_percent_color(double percent)
+{
+ char *color = PERF_COLOR_NORMAL;
+ /*
+ * We color high-overhead entries in red, mid-overhead
+ * entries in green - and keep the low overhead places
+ * normal:
+ */
+ if (percent >= MIN_RED)
+ color = PERF_COLOR_RED;
+ else {
+ if (percent > MIN_GREEN)
+ color = PERF_COLOR_GREEN;
+ }
+ return color;
+}
+
+int percent_color_fprintf(FILE *fp, const char *fmt, double percent)
+{
+ int r;
+ char *color;
+
+ color = get_percent_color(percent);
+ r = color_fprintf(fp, color, fmt, percent);
+
+ return r;
+}
diff --git a/tools/perf/util/color.h b/tools/perf/util/color.h
index 5abfd37..706cec5 100644
--- a/tools/perf/util/color.h
+++ b/tools/perf/util/color.h
@@ -15,6 +15,9 @@
#define PERF_COLOR_CYAN "\033[36m"
#define PERF_COLOR_BG_RED "\033[41m"
+#define MIN_GREEN 0.5
+#define MIN_RED 5.0
+
/*
* This variable stores the value of color.ui
*/
@@ -32,5 +35,7 @@
int color_fprintf(FILE *fp, const char *color, const char *fmt, ...);
int color_fprintf_ln(FILE *fp, const char *color, const char *fmt, ...);
int color_fwrite_lines(FILE *fp, const char *color, size_t count, const char *buf);
+int percent_color_fprintf(FILE *fp, const char *fmt, double percent);
+char *get_percent_color(double percent);
#endif /* COLOR_H */
diff --git a/tools/perf/util/config.c b/tools/perf/util/config.c
index 3dd13fa..780df54 100644
--- a/tools/perf/util/config.c
+++ b/tools/perf/util/config.c
@@ -47,10 +47,12 @@
static char *parse_value(void)
{
static char value[1024];
- int quote = 0, comment = 0, len = 0, space = 0;
+ int quote = 0, comment = 0, space = 0;
+ size_t len = 0;
for (;;) {
int c = get_next_char();
+
if (len >= sizeof(value) - 1)
return NULL;
if (c == '\n') {
@@ -353,13 +355,13 @@
return 0;
}
-static int perf_default_core_config(const char *var, const char *value)
+static int perf_default_core_config(const char *var __used, const char *value __used)
{
/* Add other config variables here and to Documentation/config.txt. */
return 0;
}
-int perf_default_config(const char *var, const char *value, void *dummy)
+int perf_default_config(const char *var, const char *value, void *dummy __used)
{
if (!prefixcmp(var, "core."))
return perf_default_core_config(var, value);
@@ -471,10 +473,10 @@
!regexec(store.value_regex, value, 0, NULL, 0)));
}
-static int store_aux(const char* key, const char* value, void *cb)
+static int store_aux(const char* key, const char* value, void *cb __used)
{
+ int section_len;
const char *ep;
- size_t section_len;
switch (store.state) {
case KEY_SEEN:
@@ -551,7 +553,7 @@
strbuf_addf(&sb, "[%.*s]\n", store.baselen, key);
}
- success = write_in_full(fd, sb.buf, sb.len) == sb.len;
+ success = (write_in_full(fd, sb.buf, sb.len) == (ssize_t)sb.len);
strbuf_release(&sb);
return success;
@@ -599,7 +601,7 @@
}
strbuf_addf(&sb, "%s\n", quote);
- success = write_in_full(fd, sb.buf, sb.len) == sb.len;
+ success = (write_in_full(fd, sb.buf, sb.len) == (ssize_t)sb.len);
strbuf_release(&sb);
return success;
@@ -741,7 +743,7 @@
} else {
struct stat st;
char* contents;
- size_t contents_sz, copy_begin, copy_end;
+ ssize_t contents_sz, copy_begin, copy_end;
int i, new_line = 0;
if (value_regex == NULL)
diff --git a/tools/perf/util/exec_cmd.c b/tools/perf/util/exec_cmd.c
index d392922..34a3528 100644
--- a/tools/perf/util/exec_cmd.c
+++ b/tools/perf/util/exec_cmd.c
@@ -1,6 +1,9 @@
#include "cache.h"
#include "exec_cmd.h"
#include "quote.h"
+
+#include <string.h>
+
#define MAX_ARGS 32
extern char **environ;
@@ -51,7 +54,7 @@
slash--;
if (slash >= argv0) {
- argv0_path = strndup(argv0, slash - argv0);
+ argv0_path = xstrndup(argv0, slash - argv0);
return slash + 1;
}
diff --git a/tools/perf/util/header.c b/tools/perf/util/header.c
new file mode 100644
index 0000000..450384b
--- /dev/null
+++ b/tools/perf/util/header.c
@@ -0,0 +1,242 @@
+#include <sys/types.h>
+#include <unistd.h>
+#include <stdio.h>
+#include <stdlib.h>
+
+#include "util.h"
+#include "header.h"
+
+/*
+ *
+ */
+
+struct perf_header_attr *perf_header_attr__new(struct perf_counter_attr *attr)
+{
+ struct perf_header_attr *self = malloc(sizeof(*self));
+
+ if (!self)
+ die("nomem");
+
+ self->attr = *attr;
+ self->ids = 0;
+ self->size = 1;
+ self->id = malloc(sizeof(u64));
+
+ if (!self->id)
+ die("nomem");
+
+ return self;
+}
+
+void perf_header_attr__add_id(struct perf_header_attr *self, u64 id)
+{
+ int pos = self->ids;
+
+ self->ids++;
+ if (self->ids > self->size) {
+ self->size *= 2;
+ self->id = realloc(self->id, self->size * sizeof(u64));
+ if (!self->id)
+ die("nomem");
+ }
+ self->id[pos] = id;
+}
+
+/*
+ *
+ */
+
+struct perf_header *perf_header__new(void)
+{
+ struct perf_header *self = malloc(sizeof(*self));
+
+ if (!self)
+ die("nomem");
+
+ self->frozen = 0;
+
+ self->attrs = 0;
+ self->size = 1;
+ self->attr = malloc(sizeof(void *));
+
+ if (!self->attr)
+ die("nomem");
+
+ self->data_offset = 0;
+ self->data_size = 0;
+
+ return self;
+}
+
+void perf_header__add_attr(struct perf_header *self,
+ struct perf_header_attr *attr)
+{
+ int pos = self->attrs;
+
+ if (self->frozen)
+ die("frozen");
+
+ self->attrs++;
+ if (self->attrs > self->size) {
+ self->size *= 2;
+ self->attr = realloc(self->attr, self->size * sizeof(void *));
+ if (!self->attr)
+ die("nomem");
+ }
+ self->attr[pos] = attr;
+}
+
+static const char *__perf_magic = "PERFFILE";
+
+#define PERF_MAGIC (*(u64 *)__perf_magic)
+
+struct perf_file_section {
+ u64 offset;
+ u64 size;
+};
+
+struct perf_file_attr {
+ struct perf_counter_attr attr;
+ struct perf_file_section ids;
+};
+
+struct perf_file_header {
+ u64 magic;
+ u64 size;
+ u64 attr_size;
+ struct perf_file_section attrs;
+ struct perf_file_section data;
+};
+
+static void do_write(int fd, void *buf, size_t size)
+{
+ while (size) {
+ int ret = write(fd, buf, size);
+
+ if (ret < 0)
+ die("failed to write");
+
+ size -= ret;
+ buf += ret;
+ }
+}
+
+void perf_header__write(struct perf_header *self, int fd)
+{
+ struct perf_file_header f_header;
+ struct perf_file_attr f_attr;
+ struct perf_header_attr *attr;
+ int i;
+
+ lseek(fd, sizeof(f_header), SEEK_SET);
+
+
+ for (i = 0; i < self->attrs; i++) {
+ attr = self->attr[i];
+
+ attr->id_offset = lseek(fd, 0, SEEK_CUR);
+ do_write(fd, attr->id, attr->ids * sizeof(u64));
+ }
+
+
+ self->attr_offset = lseek(fd, 0, SEEK_CUR);
+
+ for (i = 0; i < self->attrs; i++) {
+ attr = self->attr[i];
+
+ f_attr = (struct perf_file_attr){
+ .attr = attr->attr,
+ .ids = {
+ .offset = attr->id_offset,
+ .size = attr->ids * sizeof(u64),
+ }
+ };
+ do_write(fd, &f_attr, sizeof(f_attr));
+ }
+
+
+ self->data_offset = lseek(fd, 0, SEEK_CUR);
+
+ f_header = (struct perf_file_header){
+ .magic = PERF_MAGIC,
+ .size = sizeof(f_header),
+ .attr_size = sizeof(f_attr),
+ .attrs = {
+ .offset = self->attr_offset,
+ .size = self->attrs * sizeof(f_attr),
+ },
+ .data = {
+ .offset = self->data_offset,
+ .size = self->data_size,
+ },
+ };
+
+ lseek(fd, 0, SEEK_SET);
+ do_write(fd, &f_header, sizeof(f_header));
+ lseek(fd, self->data_offset + self->data_size, SEEK_SET);
+
+ self->frozen = 1;
+}
+
+static void do_read(int fd, void *buf, size_t size)
+{
+ while (size) {
+ int ret = read(fd, buf, size);
+
+ if (ret < 0)
+ die("failed to read");
+
+ size -= ret;
+ buf += ret;
+ }
+}
+
+struct perf_header *perf_header__read(int fd)
+{
+ struct perf_header *self = perf_header__new();
+ struct perf_file_header f_header;
+ struct perf_file_attr f_attr;
+ u64 f_id;
+
+ int nr_attrs, nr_ids, i, j;
+
+ lseek(fd, 0, SEEK_SET);
+ do_read(fd, &f_header, sizeof(f_header));
+
+ if (f_header.magic != PERF_MAGIC ||
+ f_header.size != sizeof(f_header) ||
+ f_header.attr_size != sizeof(f_attr))
+ die("incompatible file format");
+
+ nr_attrs = f_header.attrs.size / sizeof(f_attr);
+ lseek(fd, f_header.attrs.offset, SEEK_SET);
+
+ for (i = 0; i < nr_attrs; i++) {
+ struct perf_header_attr *attr;
+ off_t tmp = lseek(fd, 0, SEEK_CUR);
+
+ do_read(fd, &f_attr, sizeof(f_attr));
+
+ attr = perf_header_attr__new(&f_attr.attr);
+
+ nr_ids = f_attr.ids.size / sizeof(u64);
+ lseek(fd, f_attr.ids.offset, SEEK_SET);
+
+ for (j = 0; j < nr_ids; j++) {
+ do_read(fd, &f_id, sizeof(f_id));
+
+ perf_header_attr__add_id(attr, f_id);
+ }
+ perf_header__add_attr(self, attr);
+ lseek(fd, tmp, SEEK_SET);
+ }
+
+ self->data_offset = f_header.data.offset;
+ self->data_size = f_header.data.size;
+
+ lseek(fd, self->data_offset + self->data_size, SEEK_SET);
+
+ self->frozen = 1;
+
+ return self;
+}
diff --git a/tools/perf/util/header.h b/tools/perf/util/header.h
new file mode 100644
index 0000000..b5ef53a
--- /dev/null
+++ b/tools/perf/util/header.h
@@ -0,0 +1,37 @@
+#ifndef _PERF_HEADER_H
+#define _PERF_HEADER_H
+
+#include "../../../include/linux/perf_counter.h"
+#include <sys/types.h>
+#include "types.h"
+
+struct perf_header_attr {
+ struct perf_counter_attr attr;
+ int ids, size;
+ u64 *id;
+ off_t id_offset;
+};
+
+struct perf_header {
+ int frozen;
+ int attrs, size;
+ struct perf_header_attr **attr;
+ off_t attr_offset;
+ u64 data_offset;
+ u64 data_size;
+};
+
+struct perf_header *perf_header__read(int fd);
+void perf_header__write(struct perf_header *self, int fd);
+
+void perf_header__add_attr(struct perf_header *self,
+ struct perf_header_attr *attr);
+
+struct perf_header_attr *
+perf_header_attr__new(struct perf_counter_attr *attr);
+void perf_header_attr__add_id(struct perf_header_attr *self, u64 id);
+
+
+struct perf_header *perf_header__new(void);
+
+#endif /* _PERF_HEADER_H */
diff --git a/tools/perf/util/help.c b/tools/perf/util/help.c
index 6653f7d..fbb0097 100644
--- a/tools/perf/util/help.c
+++ b/tools/perf/util/help.c
@@ -26,7 +26,7 @@
return 80;
}
-void add_cmdname(struct cmdnames *cmds, const char *name, int len)
+void add_cmdname(struct cmdnames *cmds, const char *name, size_t len)
{
struct cmdname *ent = malloc(sizeof(*ent) + len + 1);
@@ -40,7 +40,8 @@
static void clean_cmdnames(struct cmdnames *cmds)
{
- int i;
+ unsigned int i;
+
for (i = 0; i < cmds->cnt; ++i)
free(cmds->names[i]);
free(cmds->names);
@@ -57,7 +58,7 @@
static void uniq(struct cmdnames *cmds)
{
- int i, j;
+ unsigned int i, j;
if (!cmds->cnt)
return;
@@ -71,7 +72,7 @@
void exclude_cmds(struct cmdnames *cmds, struct cmdnames *excludes)
{
- int ci, cj, ei;
+ size_t ci, cj, ei;
int cmp;
ci = cj = ei = 0;
@@ -106,8 +107,9 @@
printf(" ");
for (j = 0; j < cols; j++) {
- int n = j * rows + i;
- int size = space;
+ unsigned int n = j * rows + i;
+ unsigned int size = space;
+
if (n >= cmds->cnt)
break;
if (j == cols-1 || n + rows >= cmds->cnt)
@@ -126,21 +128,6 @@
!S_ISREG(st.st_mode))
return 0;
-#ifdef __MINGW32__
- /* cannot trust the executable bit, peek into the file instead */
- char buf[3] = { 0 };
- int n;
- int fd = open(name, O_RDONLY);
- st.st_mode &= ~S_IXUSR;
- if (fd >= 0) {
- n = read(fd, buf, 2);
- if (n == 2)
- /* DOS executables start with "MZ" */
- if (!strcmp(buf, "#!") || !strcmp(buf, "MZ"))
- st.st_mode |= S_IXUSR;
- close(fd);
- }
-#endif
return st.st_mode & S_IXUSR;
}
@@ -223,7 +210,7 @@
void list_commands(const char *title, struct cmdnames *main_cmds,
struct cmdnames *other_cmds)
{
- int i, longest = 0;
+ unsigned int i, longest = 0;
for (i = 0; i < main_cmds->cnt; i++)
if (longest < main_cmds->names[i]->len)
@@ -254,7 +241,8 @@
int is_in_cmdlist(struct cmdnames *c, const char *s)
{
- int i;
+ unsigned int i;
+
for (i = 0; i < c->cnt; i++)
if (!strcmp(s, c->names[i]->name))
return 1;
@@ -286,7 +274,8 @@
static void add_cmd_list(struct cmdnames *cmds, struct cmdnames *old)
{
- int i;
+ unsigned int i;
+
ALLOC_GROW(cmds->names, cmds->cnt + old->cnt, cmds->alloc);
for (i = 0; i < old->cnt; i++)
@@ -298,7 +287,7 @@
const char *help_unknown_cmd(const char *cmd)
{
- int i, n = 0, best_similarity = 0;
+ unsigned int i, n = 0, best_similarity = 0;
struct cmdnames main_cmds, other_cmds;
memset(&main_cmds, 0, sizeof(main_cmds));
@@ -360,7 +349,7 @@
exit(1);
}
-int cmd_version(int argc, const char **argv, const char *prefix)
+int cmd_version(int argc __used, const char **argv __used, const char *prefix __used)
{
printf("perf version %s\n", perf_version_string);
return 0;
diff --git a/tools/perf/util/help.h b/tools/perf/util/help.h
index 56bc154..7128783 100644
--- a/tools/perf/util/help.h
+++ b/tools/perf/util/help.h
@@ -2,8 +2,8 @@
#define HELP_H
struct cmdnames {
- int alloc;
- int cnt;
+ size_t alloc;
+ size_t cnt;
struct cmdname {
size_t len; /* also used for similarity index in help.c */
char name[FLEX_ARRAY];
@@ -19,7 +19,7 @@
void load_command_list(const char *prefix,
struct cmdnames *main_cmds,
struct cmdnames *other_cmds);
-void add_cmdname(struct cmdnames *cmds, const char *name, int len);
+void add_cmdname(struct cmdnames *cmds, const char *name, size_t len);
/* Here we require that excludes is a sorted list. */
void exclude_cmds(struct cmdnames *cmds, struct cmdnames *excludes);
int is_in_cmdlist(struct cmdnames *c, const char *s);
diff --git a/tools/perf/util/include/asm/system.h b/tools/perf/util/include/asm/system.h
new file mode 100644
index 0000000..710cecc
--- /dev/null
+++ b/tools/perf/util/include/asm/system.h
@@ -0,0 +1 @@
+/* Empty */
diff --git a/tools/perf/util/include/linux/kernel.h b/tools/perf/util/include/linux/kernel.h
new file mode 100644
index 0000000..99c1b3d
--- /dev/null
+++ b/tools/perf/util/include/linux/kernel.h
@@ -0,0 +1,21 @@
+#ifndef PERF_LINUX_KERNEL_H_
+#define PERF_LINUX_KERNEL_H_
+
+#ifndef offsetof
+#define offsetof(TYPE, MEMBER) ((size_t) &((TYPE *)0)->MEMBER)
+#endif
+
+#ifndef container_of
+/**
+ * container_of - cast a member of a structure out to the containing structure
+ * @ptr: the pointer to the member.
+ * @type: the type of the container struct this is embedded in.
+ * @member: the name of the member within the struct.
+ *
+ */
+#define container_of(ptr, type, member) ({ \
+ const typeof(((type *)0)->member) * __mptr = (ptr); \
+ (type *)((char *)__mptr - offsetof(type, member)); })
+#endif
+
+#endif
diff --git a/tools/perf/util/include/linux/list.h b/tools/perf/util/include/linux/list.h
new file mode 100644
index 0000000..dbe4b81
--- /dev/null
+++ b/tools/perf/util/include/linux/list.h
@@ -0,0 +1,18 @@
+#include "../../../../include/linux/list.h"
+
+#ifndef PERF_LIST_H
+#define PERF_LIST_H
+/**
+ * list_del_range - deletes range of entries from list.
+ * @begin: first element in the range to delete from the list.
+ * @end: last element in the range to delete from the list.
+ * Note: list_empty on the range of entries does not return true after this,
+ * the entries is in an undefined state.
+ */
+static inline void list_del_range(struct list_head *begin,
+ struct list_head *end)
+{
+ begin->prev->next = end->next;
+ end->next->prev = begin->prev;
+}
+#endif
diff --git a/tools/perf/util/include/linux/module.h b/tools/perf/util/include/linux/module.h
new file mode 100644
index 0000000..b43e2dc
--- /dev/null
+++ b/tools/perf/util/include/linux/module.h
@@ -0,0 +1,6 @@
+#ifndef PERF_LINUX_MODULE_H
+#define PERF_LINUX_MODULE_H
+
+#define EXPORT_SYMBOL(name)
+
+#endif
diff --git a/tools/perf/util/include/linux/poison.h b/tools/perf/util/include/linux/poison.h
new file mode 100644
index 0000000..fef6dbc
--- /dev/null
+++ b/tools/perf/util/include/linux/poison.h
@@ -0,0 +1 @@
+#include "../../../../include/linux/poison.h"
diff --git a/tools/perf/util/include/linux/prefetch.h b/tools/perf/util/include/linux/prefetch.h
new file mode 100644
index 0000000..7841e48
--- /dev/null
+++ b/tools/perf/util/include/linux/prefetch.h
@@ -0,0 +1,6 @@
+#ifndef PERF_LINUX_PREFETCH_H
+#define PERF_LINUX_PREFETCH_H
+
+static inline void prefetch(void *a __attribute__((unused))) { }
+
+#endif
diff --git a/tools/perf/util/include/linux/rbtree.h b/tools/perf/util/include/linux/rbtree.h
new file mode 100644
index 0000000..7a243a1
--- /dev/null
+++ b/tools/perf/util/include/linux/rbtree.h
@@ -0,0 +1 @@
+#include "../../../../include/linux/rbtree.h"
diff --git a/tools/perf/util/list.h b/tools/perf/util/list.h
deleted file mode 100644
index e2548e8..0000000
--- a/tools/perf/util/list.h
+++ /dev/null
@@ -1,603 +0,0 @@
-#ifndef _LINUX_LIST_H
-#define _LINUX_LIST_H
-/*
- Copyright (C) Cast of dozens, comes from the Linux kernel
-
- This program is free software; you can redistribute it and/or modify it
- under the terms of version 2 of the GNU General Public License as
- published by the Free Software Foundation.
-*/
-
-#include <stddef.h>
-
-/*
- * These are non-NULL pointers that will result in page faults
- * under normal circumstances, used to verify that nobody uses
- * non-initialized list entries.
- */
-#define LIST_POISON1 ((void *)0x00100100)
-#define LIST_POISON2 ((void *)0x00200200)
-
-/**
- * container_of - cast a member of a structure out to the containing structure
- * @ptr: the pointer to the member.
- * @type: the type of the container struct this is embedded in.
- * @member: the name of the member within the struct.
- *
- */
-#define container_of(ptr, type, member) ({ \
- const typeof( ((type *)0)->member ) *__mptr = (ptr); \
- (type *)( (char *)__mptr - offsetof(type,member) );})
-
-/*
- * Simple doubly linked list implementation.
- *
- * Some of the internal functions ("__xxx") are useful when
- * manipulating whole lists rather than single entries, as
- * sometimes we already know the next/prev entries and we can
- * generate better code by using them directly rather than
- * using the generic single-entry routines.
- */
-
-struct list_head {
- struct list_head *next, *prev;
-};
-
-#define LIST_HEAD_INIT(name) { &(name), &(name) }
-
-#define LIST_HEAD(name) \
- struct list_head name = LIST_HEAD_INIT(name)
-
-static inline void INIT_LIST_HEAD(struct list_head *list)
-{
- list->next = list;
- list->prev = list;
-}
-
-/*
- * Insert a new entry between two known consecutive entries.
- *
- * This is only for internal list manipulation where we know
- * the prev/next entries already!
- */
-static inline void __list_add(struct list_head *new,
- struct list_head *prev,
- struct list_head *next)
-{
- next->prev = new;
- new->next = next;
- new->prev = prev;
- prev->next = new;
-}
-
-/**
- * list_add - add a new entry
- * @new: new entry to be added
- * @head: list head to add it after
- *
- * Insert a new entry after the specified head.
- * This is good for implementing stacks.
- */
-static inline void list_add(struct list_head *new, struct list_head *head)
-{
- __list_add(new, head, head->next);
-}
-
-/**
- * list_add_tail - add a new entry
- * @new: new entry to be added
- * @head: list head to add it before
- *
- * Insert a new entry before the specified head.
- * This is useful for implementing queues.
- */
-static inline void list_add_tail(struct list_head *new, struct list_head *head)
-{
- __list_add(new, head->prev, head);
-}
-
-/*
- * Delete a list entry by making the prev/next entries
- * point to each other.
- *
- * This is only for internal list manipulation where we know
- * the prev/next entries already!
- */
-static inline void __list_del(struct list_head * prev, struct list_head * next)
-{
- next->prev = prev;
- prev->next = next;
-}
-
-/**
- * list_del - deletes entry from list.
- * @entry: the element to delete from the list.
- * Note: list_empty on entry does not return true after this, the entry is
- * in an undefined state.
- */
-static inline void list_del(struct list_head *entry)
-{
- __list_del(entry->prev, entry->next);
- entry->next = LIST_POISON1;
- entry->prev = LIST_POISON2;
-}
-
-/**
- * list_del_range - deletes range of entries from list.
- * @beging: first element in the range to delete from the list.
- * @beging: first element in the range to delete from the list.
- * Note: list_empty on the range of entries does not return true after this,
- * the entries is in an undefined state.
- */
-static inline void list_del_range(struct list_head *begin,
- struct list_head *end)
-{
- begin->prev->next = end->next;
- end->next->prev = begin->prev;
-}
-
-/**
- * list_replace - replace old entry by new one
- * @old : the element to be replaced
- * @new : the new element to insert
- * Note: if 'old' was empty, it will be overwritten.
- */
-static inline void list_replace(struct list_head *old,
- struct list_head *new)
-{
- new->next = old->next;
- new->next->prev = new;
- new->prev = old->prev;
- new->prev->next = new;
-}
-
-static inline void list_replace_init(struct list_head *old,
- struct list_head *new)
-{
- list_replace(old, new);
- INIT_LIST_HEAD(old);
-}
-
-/**
- * list_del_init - deletes entry from list and reinitialize it.
- * @entry: the element to delete from the list.
- */
-static inline void list_del_init(struct list_head *entry)
-{
- __list_del(entry->prev, entry->next);
- INIT_LIST_HEAD(entry);
-}
-
-/**
- * list_move - delete from one list and add as another's head
- * @list: the entry to move
- * @head: the head that will precede our entry
- */
-static inline void list_move(struct list_head *list, struct list_head *head)
-{
- __list_del(list->prev, list->next);
- list_add(list, head);
-}
-
-/**
- * list_move_tail - delete from one list and add as another's tail
- * @list: the entry to move
- * @head: the head that will follow our entry
- */
-static inline void list_move_tail(struct list_head *list,
- struct list_head *head)
-{
- __list_del(list->prev, list->next);
- list_add_tail(list, head);
-}
-
-/**
- * list_is_last - tests whether @list is the last entry in list @head
- * @list: the entry to test
- * @head: the head of the list
- */
-static inline int list_is_last(const struct list_head *list,
- const struct list_head *head)
-{
- return list->next == head;
-}
-
-/**
- * list_empty - tests whether a list is empty
- * @head: the list to test.
- */
-static inline int list_empty(const struct list_head *head)
-{
- return head->next == head;
-}
-
-/**
- * list_empty_careful - tests whether a list is empty and not being modified
- * @head: the list to test
- *
- * Description:
- * tests whether a list is empty _and_ checks that no other CPU might be
- * in the process of modifying either member (next or prev)
- *
- * NOTE: using list_empty_careful() without synchronization
- * can only be safe if the only activity that can happen
- * to the list entry is list_del_init(). Eg. it cannot be used
- * if another CPU could re-list_add() it.
- */
-static inline int list_empty_careful(const struct list_head *head)
-{
- struct list_head *next = head->next;
- return (next == head) && (next == head->prev);
-}
-
-static inline void __list_splice(struct list_head *list,
- struct list_head *head)
-{
- struct list_head *first = list->next;
- struct list_head *last = list->prev;
- struct list_head *at = head->next;
-
- first->prev = head;
- head->next = first;
-
- last->next = at;
- at->prev = last;
-}
-
-/**
- * list_splice - join two lists
- * @list: the new list to add.
- * @head: the place to add it in the first list.
- */
-static inline void list_splice(struct list_head *list, struct list_head *head)
-{
- if (!list_empty(list))
- __list_splice(list, head);
-}
-
-/**
- * list_splice_init - join two lists and reinitialise the emptied list.
- * @list: the new list to add.
- * @head: the place to add it in the first list.
- *
- * The list at @list is reinitialised
- */
-static inline void list_splice_init(struct list_head *list,
- struct list_head *head)
-{
- if (!list_empty(list)) {
- __list_splice(list, head);
- INIT_LIST_HEAD(list);
- }
-}
-
-/**
- * list_entry - get the struct for this entry
- * @ptr: the &struct list_head pointer.
- * @type: the type of the struct this is embedded in.
- * @member: the name of the list_struct within the struct.
- */
-#define list_entry(ptr, type, member) \
- container_of(ptr, type, member)
-
-/**
- * list_first_entry - get the first element from a list
- * @ptr: the list head to take the element from.
- * @type: the type of the struct this is embedded in.
- * @member: the name of the list_struct within the struct.
- *
- * Note, that list is expected to be not empty.
- */
-#define list_first_entry(ptr, type, member) \
- list_entry((ptr)->next, type, member)
-
-/**
- * list_for_each - iterate over a list
- * @pos: the &struct list_head to use as a loop cursor.
- * @head: the head for your list.
- */
-#define list_for_each(pos, head) \
- for (pos = (head)->next; pos != (head); \
- pos = pos->next)
-
-/**
- * __list_for_each - iterate over a list
- * @pos: the &struct list_head to use as a loop cursor.
- * @head: the head for your list.
- *
- * This variant differs from list_for_each() in that it's the
- * simplest possible list iteration code, no prefetching is done.
- * Use this for code that knows the list to be very short (empty
- * or 1 entry) most of the time.
- */
-#define __list_for_each(pos, head) \
- for (pos = (head)->next; pos != (head); pos = pos->next)
-
-/**
- * list_for_each_prev - iterate over a list backwards
- * @pos: the &struct list_head to use as a loop cursor.
- * @head: the head for your list.
- */
-#define list_for_each_prev(pos, head) \
- for (pos = (head)->prev; pos != (head); \
- pos = pos->prev)
-
-/**
- * list_for_each_safe - iterate over a list safe against removal of list entry
- * @pos: the &struct list_head to use as a loop cursor.
- * @n: another &struct list_head to use as temporary storage
- * @head: the head for your list.
- */
-#define list_for_each_safe(pos, n, head) \
- for (pos = (head)->next, n = pos->next; pos != (head); \
- pos = n, n = pos->next)
-
-/**
- * list_for_each_entry - iterate over list of given type
- * @pos: the type * to use as a loop cursor.
- * @head: the head for your list.
- * @member: the name of the list_struct within the struct.
- */
-#define list_for_each_entry(pos, head, member) \
- for (pos = list_entry((head)->next, typeof(*pos), member); \
- &pos->member != (head); \
- pos = list_entry(pos->member.next, typeof(*pos), member))
-
-/**
- * list_for_each_entry_reverse - iterate backwards over list of given type.
- * @pos: the type * to use as a loop cursor.
- * @head: the head for your list.
- * @member: the name of the list_struct within the struct.
- */
-#define list_for_each_entry_reverse(pos, head, member) \
- for (pos = list_entry((head)->prev, typeof(*pos), member); \
- &pos->member != (head); \
- pos = list_entry(pos->member.prev, typeof(*pos), member))
-
-/**
- * list_prepare_entry - prepare a pos entry for use in list_for_each_entry_continue
- * @pos: the type * to use as a start point
- * @head: the head of the list
- * @member: the name of the list_struct within the struct.
- *
- * Prepares a pos entry for use as a start point in list_for_each_entry_continue.
- */
-#define list_prepare_entry(pos, head, member) \
- ((pos) ? : list_entry(head, typeof(*pos), member))
-
-/**
- * list_for_each_entry_continue - continue iteration over list of given type
- * @pos: the type * to use as a loop cursor.
- * @head: the head for your list.
- * @member: the name of the list_struct within the struct.
- *
- * Continue to iterate over list of given type, continuing after
- * the current position.
- */
-#define list_for_each_entry_continue(pos, head, member) \
- for (pos = list_entry(pos->member.next, typeof(*pos), member); \
- &pos->member != (head); \
- pos = list_entry(pos->member.next, typeof(*pos), member))
-
-/**
- * list_for_each_entry_from - iterate over list of given type from the current point
- * @pos: the type * to use as a loop cursor.
- * @head: the head for your list.
- * @member: the name of the list_struct within the struct.
- *
- * Iterate over list of given type, continuing from current position.
- */
-#define list_for_each_entry_from(pos, head, member) \
- for (; &pos->member != (head); \
- pos = list_entry(pos->member.next, typeof(*pos), member))
-
-/**
- * list_for_each_entry_safe - iterate over list of given type safe against removal of list entry
- * @pos: the type * to use as a loop cursor.
- * @n: another type * to use as temporary storage
- * @head: the head for your list.
- * @member: the name of the list_struct within the struct.
- */
-#define list_for_each_entry_safe(pos, n, head, member) \
- for (pos = list_entry((head)->next, typeof(*pos), member), \
- n = list_entry(pos->member.next, typeof(*pos), member); \
- &pos->member != (head); \
- pos = n, n = list_entry(n->member.next, typeof(*n), member))
-
-/**
- * list_for_each_entry_safe_continue
- * @pos: the type * to use as a loop cursor.
- * @n: another type * to use as temporary storage
- * @head: the head for your list.
- * @member: the name of the list_struct within the struct.
- *
- * Iterate over list of given type, continuing after current point,
- * safe against removal of list entry.
- */
-#define list_for_each_entry_safe_continue(pos, n, head, member) \
- for (pos = list_entry(pos->member.next, typeof(*pos), member), \
- n = list_entry(pos->member.next, typeof(*pos), member); \
- &pos->member != (head); \
- pos = n, n = list_entry(n->member.next, typeof(*n), member))
-
-/**
- * list_for_each_entry_safe_from
- * @pos: the type * to use as a loop cursor.
- * @n: another type * to use as temporary storage
- * @head: the head for your list.
- * @member: the name of the list_struct within the struct.
- *
- * Iterate over list of given type from current point, safe against
- * removal of list entry.
- */
-#define list_for_each_entry_safe_from(pos, n, head, member) \
- for (n = list_entry(pos->member.next, typeof(*pos), member); \
- &pos->member != (head); \
- pos = n, n = list_entry(n->member.next, typeof(*n), member))
-
-/**
- * list_for_each_entry_safe_reverse
- * @pos: the type * to use as a loop cursor.
- * @n: another type * to use as temporary storage
- * @head: the head for your list.
- * @member: the name of the list_struct within the struct.
- *
- * Iterate backwards over list of given type, safe against removal
- * of list entry.
- */
-#define list_for_each_entry_safe_reverse(pos, n, head, member) \
- for (pos = list_entry((head)->prev, typeof(*pos), member), \
- n = list_entry(pos->member.prev, typeof(*pos), member); \
- &pos->member != (head); \
- pos = n, n = list_entry(n->member.prev, typeof(*n), member))
-
-/*
- * Double linked lists with a single pointer list head.
- * Mostly useful for hash tables where the two pointer list head is
- * too wasteful.
- * You lose the ability to access the tail in O(1).
- */
-
-struct hlist_head {
- struct hlist_node *first;
-};
-
-struct hlist_node {
- struct hlist_node *next, **pprev;
-};
-
-#define HLIST_HEAD_INIT { .first = NULL }
-#define HLIST_HEAD(name) struct hlist_head name = { .first = NULL }
-#define INIT_HLIST_HEAD(ptr) ((ptr)->first = NULL)
-static inline void INIT_HLIST_NODE(struct hlist_node *h)
-{
- h->next = NULL;
- h->pprev = NULL;
-}
-
-static inline int hlist_unhashed(const struct hlist_node *h)
-{
- return !h->pprev;
-}
-
-static inline int hlist_empty(const struct hlist_head *h)
-{
- return !h->first;
-}
-
-static inline void __hlist_del(struct hlist_node *n)
-{
- struct hlist_node *next = n->next;
- struct hlist_node **pprev = n->pprev;
- *pprev = next;
- if (next)
- next->pprev = pprev;
-}
-
-static inline void hlist_del(struct hlist_node *n)
-{
- __hlist_del(n);
- n->next = LIST_POISON1;
- n->pprev = LIST_POISON2;
-}
-
-static inline void hlist_del_init(struct hlist_node *n)
-{
- if (!hlist_unhashed(n)) {
- __hlist_del(n);
- INIT_HLIST_NODE(n);
- }
-}
-
-static inline void hlist_add_head(struct hlist_node *n, struct hlist_head *h)
-{
- struct hlist_node *first = h->first;
- n->next = first;
- if (first)
- first->pprev = &n->next;
- h->first = n;
- n->pprev = &h->first;
-}
-
-/* next must be != NULL */
-static inline void hlist_add_before(struct hlist_node *n,
- struct hlist_node *next)
-{
- n->pprev = next->pprev;
- n->next = next;
- next->pprev = &n->next;
- *(n->pprev) = n;
-}
-
-static inline void hlist_add_after(struct hlist_node *n,
- struct hlist_node *next)
-{
- next->next = n->next;
- n->next = next;
- next->pprev = &n->next;
-
- if(next->next)
- next->next->pprev = &next->next;
-}
-
-#define hlist_entry(ptr, type, member) container_of(ptr,type,member)
-
-#define hlist_for_each(pos, head) \
- for (pos = (head)->first; pos; \
- pos = pos->next)
-
-#define hlist_for_each_safe(pos, n, head) \
- for (pos = (head)->first; pos && ({ n = pos->next; 1; }); \
- pos = n)
-
-/**
- * hlist_for_each_entry - iterate over list of given type
- * @tpos: the type * to use as a loop cursor.
- * @pos: the &struct hlist_node to use as a loop cursor.
- * @head: the head for your list.
- * @member: the name of the hlist_node within the struct.
- */
-#define hlist_for_each_entry(tpos, pos, head, member) \
- for (pos = (head)->first; \
- pos && \
- ({ tpos = hlist_entry(pos, typeof(*tpos), member); 1;}); \
- pos = pos->next)
-
-/**
- * hlist_for_each_entry_continue - iterate over a hlist continuing after current point
- * @tpos: the type * to use as a loop cursor.
- * @pos: the &struct hlist_node to use as a loop cursor.
- * @member: the name of the hlist_node within the struct.
- */
-#define hlist_for_each_entry_continue(tpos, pos, member) \
- for (pos = (pos)->next; \
- pos && \
- ({ tpos = hlist_entry(pos, typeof(*tpos), member); 1;}); \
- pos = pos->next)
-
-/**
- * hlist_for_each_entry_from - iterate over a hlist continuing from current point
- * @tpos: the type * to use as a loop cursor.
- * @pos: the &struct hlist_node to use as a loop cursor.
- * @member: the name of the hlist_node within the struct.
- */
-#define hlist_for_each_entry_from(tpos, pos, member) \
- for (; pos && \
- ({ tpos = hlist_entry(pos, typeof(*tpos), member); 1;}); \
- pos = pos->next)
-
-/**
- * hlist_for_each_entry_safe - iterate over list of given type safe against removal of list entry
- * @tpos: the type * to use as a loop cursor.
- * @pos: the &struct hlist_node to use as a loop cursor.
- * @n: another &struct hlist_node to use as temporary storage
- * @head: the head for your list.
- * @member: the name of the hlist_node within the struct.
- */
-#define hlist_for_each_entry_safe(tpos, pos, n, head, member) \
- for (pos = (head)->first; \
- pos && ({ n = pos->next; 1; }) && \
- ({ tpos = hlist_entry(pos, typeof(*tpos), member); 1;}); \
- pos = n)
-
-#endif
diff --git a/tools/perf/util/module.c b/tools/perf/util/module.c
new file mode 100644
index 0000000..ddabe92
--- /dev/null
+++ b/tools/perf/util/module.c
@@ -0,0 +1,509 @@
+#include "util.h"
+#include "../perf.h"
+#include "string.h"
+#include "module.h"
+
+#include <libelf.h>
+#include <gelf.h>
+#include <elf.h>
+#include <dirent.h>
+#include <sys/utsname.h>
+
+static unsigned int crc32(const char *p, unsigned int len)
+{
+ int i;
+ unsigned int crc = 0;
+
+ while (len--) {
+ crc ^= *p++;
+ for (i = 0; i < 8; i++)
+ crc = (crc >> 1) ^ ((crc & 1) ? 0xedb88320 : 0);
+ }
+ return crc;
+}
+
+/* module section methods */
+
+struct sec_dso *sec_dso__new_dso(const char *name)
+{
+ struct sec_dso *self = malloc(sizeof(*self) + strlen(name) + 1);
+
+ if (self != NULL) {
+ strcpy(self->name, name);
+ self->secs = RB_ROOT;
+ self->find_section = sec_dso__find_section;
+ }
+
+ return self;
+}
+
+static void sec_dso__delete_section(struct section *self)
+{
+ free(((void *)self));
+}
+
+void sec_dso__delete_sections(struct sec_dso *self)
+{
+ struct section *pos;
+ struct rb_node *next = rb_first(&self->secs);
+
+ while (next) {
+ pos = rb_entry(next, struct section, rb_node);
+ next = rb_next(&pos->rb_node);
+ rb_erase(&pos->rb_node, &self->secs);
+ sec_dso__delete_section(pos);
+ }
+}
+
+void sec_dso__delete_self(struct sec_dso *self)
+{
+ sec_dso__delete_sections(self);
+ free(self);
+}
+
+static void sec_dso__insert_section(struct sec_dso *self, struct section *sec)
+{
+ struct rb_node **p = &self->secs.rb_node;
+ struct rb_node *parent = NULL;
+ const u64 hash = sec->hash;
+ struct section *s;
+
+ while (*p != NULL) {
+ parent = *p;
+ s = rb_entry(parent, struct section, rb_node);
+ if (hash < s->hash)
+ p = &(*p)->rb_left;
+ else
+ p = &(*p)->rb_right;
+ }
+ rb_link_node(&sec->rb_node, parent, p);
+ rb_insert_color(&sec->rb_node, &self->secs);
+}
+
+struct section *sec_dso__find_section(struct sec_dso *self, const char *name)
+{
+ struct rb_node *n;
+ u64 hash;
+ int len;
+
+ if (self == NULL)
+ return NULL;
+
+ len = strlen(name);
+ hash = crc32(name, len);
+
+ n = self->secs.rb_node;
+
+ while (n) {
+ struct section *s = rb_entry(n, struct section, rb_node);
+
+ if (hash < s->hash)
+ n = n->rb_left;
+ else if (hash > s->hash)
+ n = n->rb_right;
+ else {
+ if (!strcmp(name, s->name))
+ return s;
+ else
+ n = rb_next(&s->rb_node);
+ }
+ }
+
+ return NULL;
+}
+
+static size_t sec_dso__fprintf_section(struct section *self, FILE *fp)
+{
+ return fprintf(fp, "name:%s vma:%llx path:%s\n",
+ self->name, self->vma, self->path);
+}
+
+size_t sec_dso__fprintf(struct sec_dso *self, FILE *fp)
+{
+ size_t ret = fprintf(fp, "dso: %s\n", self->name);
+
+ struct rb_node *nd;
+ for (nd = rb_first(&self->secs); nd; nd = rb_next(nd)) {
+ struct section *pos = rb_entry(nd, struct section, rb_node);
+ ret += sec_dso__fprintf_section(pos, fp);
+ }
+
+ return ret;
+}
+
+static struct section *section__new(const char *name, const char *path)
+{
+ struct section *self = calloc(1, sizeof(*self));
+
+ if (!self)
+ goto out_failure;
+
+ self->name = calloc(1, strlen(name) + 1);
+ if (!self->name)
+ goto out_failure;
+
+ self->path = calloc(1, strlen(path) + 1);
+ if (!self->path)
+ goto out_failure;
+
+ strcpy(self->name, name);
+ strcpy(self->path, path);
+ self->hash = crc32(self->name, strlen(name));
+
+ return self;
+
+out_failure:
+ if (self) {
+ if (self->name)
+ free(self->name);
+ if (self->path)
+ free(self->path);
+ free(self);
+ }
+
+ return NULL;
+}
+
+/* module methods */
+
+struct mod_dso *mod_dso__new_dso(const char *name)
+{
+ struct mod_dso *self = malloc(sizeof(*self) + strlen(name) + 1);
+
+ if (self != NULL) {
+ strcpy(self->name, name);
+ self->mods = RB_ROOT;
+ self->find_module = mod_dso__find_module;
+ }
+
+ return self;
+}
+
+static void mod_dso__delete_module(struct module *self)
+{
+ free(((void *)self));
+}
+
+void mod_dso__delete_modules(struct mod_dso *self)
+{
+ struct module *pos;
+ struct rb_node *next = rb_first(&self->mods);
+
+ while (next) {
+ pos = rb_entry(next, struct module, rb_node);
+ next = rb_next(&pos->rb_node);
+ rb_erase(&pos->rb_node, &self->mods);
+ mod_dso__delete_module(pos);
+ }
+}
+
+void mod_dso__delete_self(struct mod_dso *self)
+{
+ mod_dso__delete_modules(self);
+ free(self);
+}
+
+static void mod_dso__insert_module(struct mod_dso *self, struct module *mod)
+{
+ struct rb_node **p = &self->mods.rb_node;
+ struct rb_node *parent = NULL;
+ const u64 hash = mod->hash;
+ struct module *m;
+
+ while (*p != NULL) {
+ parent = *p;
+ m = rb_entry(parent, struct module, rb_node);
+ if (hash < m->hash)
+ p = &(*p)->rb_left;
+ else
+ p = &(*p)->rb_right;
+ }
+ rb_link_node(&mod->rb_node, parent, p);
+ rb_insert_color(&mod->rb_node, &self->mods);
+}
+
+struct module *mod_dso__find_module(struct mod_dso *self, const char *name)
+{
+ struct rb_node *n;
+ u64 hash;
+ int len;
+
+ if (self == NULL)
+ return NULL;
+
+ len = strlen(name);
+ hash = crc32(name, len);
+
+ n = self->mods.rb_node;
+
+ while (n) {
+ struct module *m = rb_entry(n, struct module, rb_node);
+
+ if (hash < m->hash)
+ n = n->rb_left;
+ else if (hash > m->hash)
+ n = n->rb_right;
+ else {
+ if (!strcmp(name, m->name))
+ return m;
+ else
+ n = rb_next(&m->rb_node);
+ }
+ }
+
+ return NULL;
+}
+
+static size_t mod_dso__fprintf_module(struct module *self, FILE *fp)
+{
+ return fprintf(fp, "name:%s path:%s\n", self->name, self->path);
+}
+
+size_t mod_dso__fprintf(struct mod_dso *self, FILE *fp)
+{
+ struct rb_node *nd;
+ size_t ret;
+
+ ret = fprintf(fp, "dso: %s\n", self->name);
+
+ for (nd = rb_first(&self->mods); nd; nd = rb_next(nd)) {
+ struct module *pos = rb_entry(nd, struct module, rb_node);
+
+ ret += mod_dso__fprintf_module(pos, fp);
+ }
+
+ return ret;
+}
+
+static struct module *module__new(const char *name, const char *path)
+{
+ struct module *self = calloc(1, sizeof(*self));
+
+ if (!self)
+ goto out_failure;
+
+ self->name = calloc(1, strlen(name) + 1);
+ if (!self->name)
+ goto out_failure;
+
+ self->path = calloc(1, strlen(path) + 1);
+ if (!self->path)
+ goto out_failure;
+
+ strcpy(self->name, name);
+ strcpy(self->path, path);
+ self->hash = crc32(self->name, strlen(name));
+
+ return self;
+
+out_failure:
+ if (self) {
+ if (self->name)
+ free(self->name);
+ if (self->path)
+ free(self->path);
+ free(self);
+ }
+
+ return NULL;
+}
+
+static int mod_dso__load_sections(struct module *mod)
+{
+ int count = 0, path_len;
+ struct dirent *entry;
+ char *line = NULL;
+ char *dir_path;
+ DIR *dir;
+ size_t n;
+
+ path_len = strlen("/sys/module/");
+ path_len += strlen(mod->name);
+ path_len += strlen("/sections/");
+
+ dir_path = calloc(1, path_len + 1);
+ if (dir_path == NULL)
+ goto out_failure;
+
+ strcat(dir_path, "/sys/module/");
+ strcat(dir_path, mod->name);
+ strcat(dir_path, "/sections/");
+
+ dir = opendir(dir_path);
+ if (dir == NULL)
+ goto out_free;
+
+ while ((entry = readdir(dir))) {
+ struct section *section;
+ char *path, *vma;
+ int line_len;
+ FILE *file;
+
+ if (!strcmp(".", entry->d_name) || !strcmp("..", entry->d_name))
+ continue;
+
+ path = calloc(1, path_len + strlen(entry->d_name) + 1);
+ if (path == NULL)
+ break;
+ strcat(path, dir_path);
+ strcat(path, entry->d_name);
+
+ file = fopen(path, "r");
+ if (file == NULL) {
+ free(path);
+ break;
+ }
+
+ line_len = getline(&line, &n, file);
+ if (line_len < 0) {
+ free(path);
+ fclose(file);
+ break;
+ }
+
+ if (!line) {
+ free(path);
+ fclose(file);
+ break;
+ }
+
+ line[--line_len] = '\0'; /* \n */
+
+ vma = strstr(line, "0x");
+ if (!vma) {
+ free(path);
+ fclose(file);
+ break;
+ }
+ vma += 2;
+
+ section = section__new(entry->d_name, path);
+ if (!section) {
+ fprintf(stderr, "load_sections: allocation error\n");
+ free(path);
+ fclose(file);
+ break;
+ }
+
+ hex2u64(vma, §ion->vma);
+ sec_dso__insert_section(mod->sections, section);
+
+ free(path);
+ fclose(file);
+ count++;
+ }
+
+ closedir(dir);
+ free(line);
+ free(dir_path);
+
+ return count;
+
+out_free:
+ free(dir_path);
+
+out_failure:
+ return count;
+}
+
+static int mod_dso__load_module_paths(struct mod_dso *self)
+{
+ struct utsname uts;
+ int count = 0, len;
+ char *line = NULL;
+ FILE *file;
+ char *path;
+ size_t n;
+
+ if (uname(&uts) < 0)
+ goto out_failure;
+
+ len = strlen("/lib/modules/");
+ len += strlen(uts.release);
+ len += strlen("/modules.dep");
+
+ path = calloc(1, len);
+ if (path == NULL)
+ goto out_failure;
+
+ strcat(path, "/lib/modules/");
+ strcat(path, uts.release);
+ strcat(path, "/modules.dep");
+
+ file = fopen(path, "r");
+ free(path);
+ if (file == NULL)
+ goto out_failure;
+
+ while (!feof(file)) {
+ char *path, *name, *tmp;
+ struct module *module;
+ int line_len, len;
+
+ line_len = getline(&line, &n, file);
+ if (line_len < 0)
+ break;
+
+ if (!line)
+ goto out_failure;
+
+ line[--line_len] = '\0'; /* \n */
+
+ path = strtok(line, ":");
+ if (!path)
+ goto out_failure;
+
+ name = strdup(path);
+ name = strtok(name, "/");
+
+ tmp = name;
+
+ while (tmp) {
+ tmp = strtok(NULL, "/");
+ if (tmp)
+ name = tmp;
+ }
+ name = strsep(&name, ".");
+
+ /* Quirk: replace '-' with '_' in sound modules */
+ for (len = strlen(name); len; len--) {
+ if (*(name+len) == '-')
+ *(name+len) = '_';
+ }
+
+ module = module__new(name, path);
+ if (!module) {
+ fprintf(stderr, "load_module_paths: allocation error\n");
+ goto out_failure;
+ }
+ mod_dso__insert_module(self, module);
+
+ module->sections = sec_dso__new_dso("sections");
+ if (!module->sections) {
+ fprintf(stderr, "load_module_paths: allocation error\n");
+ goto out_failure;
+ }
+
+ module->active = mod_dso__load_sections(module);
+
+ if (module->active > 0)
+ count++;
+ }
+
+ free(line);
+ fclose(file);
+
+ return count;
+
+out_failure:
+ return -1;
+}
+
+int mod_dso__load_modules(struct mod_dso *dso)
+{
+ int err;
+
+ err = mod_dso__load_module_paths(dso);
+
+ return err;
+}
diff --git a/tools/perf/util/module.h b/tools/perf/util/module.h
new file mode 100644
index 0000000..8a592ef
--- /dev/null
+++ b/tools/perf/util/module.h
@@ -0,0 +1,53 @@
+#ifndef _PERF_MODULE_
+#define _PERF_MODULE_ 1
+
+#include <linux/types.h>
+#include "../types.h"
+#include <linux/list.h>
+#include <linux/rbtree.h>
+
+struct section {
+ struct rb_node rb_node;
+ u64 hash;
+ u64 vma;
+ char *name;
+ char *path;
+};
+
+struct sec_dso {
+ struct list_head node;
+ struct rb_root secs;
+ struct section *(*find_section)(struct sec_dso *, const char *name);
+ char name[0];
+};
+
+struct module {
+ struct rb_node rb_node;
+ u64 hash;
+ char *name;
+ char *path;
+ struct sec_dso *sections;
+ int active;
+};
+
+struct mod_dso {
+ struct list_head node;
+ struct rb_root mods;
+ struct module *(*find_module)(struct mod_dso *, const char *name);
+ char name[0];
+};
+
+struct sec_dso *sec_dso__new_dso(const char *name);
+void sec_dso__delete_sections(struct sec_dso *self);
+void sec_dso__delete_self(struct sec_dso *self);
+size_t sec_dso__fprintf(struct sec_dso *self, FILE *fp);
+struct section *sec_dso__find_section(struct sec_dso *self, const char *name);
+
+struct mod_dso *mod_dso__new_dso(const char *name);
+void mod_dso__delete_modules(struct mod_dso *self);
+void mod_dso__delete_self(struct mod_dso *self);
+size_t mod_dso__fprintf(struct mod_dso *self, FILE *fp);
+struct module *mod_dso__find_module(struct mod_dso *self, const char *name);
+int mod_dso__load_modules(struct mod_dso *dso);
+
+#endif /* _PERF_MODULE_ */
diff --git a/tools/perf/util/pager.c b/tools/perf/util/pager.c
index a28bcca..1915de2 100644
--- a/tools/perf/util/pager.c
+++ b/tools/perf/util/pager.c
@@ -9,7 +9,6 @@
static int spawned_pager;
-#ifndef __MINGW32__
static void pager_preexec(void)
{
/*
@@ -24,7 +23,6 @@
setenv("LESS", "FRSX", 0);
}
-#endif
static const char *pager_argv[] = { "sh", "-c", NULL, NULL };
static struct child_process pager_process;
@@ -70,9 +68,8 @@
pager_argv[2] = pager;
pager_process.argv = pager_argv;
pager_process.in = -1;
-#ifndef __MINGW32__
pager_process.preexec_cb = pager_preexec;
-#endif
+
if (start_command(&pager_process))
return;
diff --git a/tools/perf/util/parse-events.c b/tools/perf/util/parse-events.c
index 35d04da..5184959 100644
--- a/tools/perf/util/parse-events.c
+++ b/tools/perf/util/parse-events.c
@@ -16,32 +16,28 @@
u8 type;
u64 config;
char *symbol;
+ char *alias;
};
-#define C(x, y) .type = PERF_TYPE_##x, .config = PERF_COUNT_##y
-#define CR(x, y) .type = PERF_TYPE_##x, .config = y
+#define CHW(x) .type = PERF_TYPE_HARDWARE, .config = PERF_COUNT_HW_##x
+#define CSW(x) .type = PERF_TYPE_SOFTWARE, .config = PERF_COUNT_SW_##x
static struct event_symbol event_symbols[] = {
- { C(HARDWARE, HW_CPU_CYCLES), "cpu-cycles", },
- { C(HARDWARE, HW_CPU_CYCLES), "cycles", },
- { C(HARDWARE, HW_INSTRUCTIONS), "instructions", },
- { C(HARDWARE, HW_CACHE_REFERENCES), "cache-references", },
- { C(HARDWARE, HW_CACHE_MISSES), "cache-misses", },
- { C(HARDWARE, HW_BRANCH_INSTRUCTIONS),"branch-instructions", },
- { C(HARDWARE, HW_BRANCH_INSTRUCTIONS),"branches", },
- { C(HARDWARE, HW_BRANCH_MISSES), "branch-misses", },
- { C(HARDWARE, HW_BUS_CYCLES), "bus-cycles", },
+ { CHW(CPU_CYCLES), "cpu-cycles", "cycles" },
+ { CHW(INSTRUCTIONS), "instructions", "" },
+ { CHW(CACHE_REFERENCES), "cache-references", "" },
+ { CHW(CACHE_MISSES), "cache-misses", "" },
+ { CHW(BRANCH_INSTRUCTIONS), "branch-instructions", "branches" },
+ { CHW(BRANCH_MISSES), "branch-misses", "" },
+ { CHW(BUS_CYCLES), "bus-cycles", "" },
- { C(SOFTWARE, SW_CPU_CLOCK), "cpu-clock", },
- { C(SOFTWARE, SW_TASK_CLOCK), "task-clock", },
- { C(SOFTWARE, SW_PAGE_FAULTS), "page-faults", },
- { C(SOFTWARE, SW_PAGE_FAULTS), "faults", },
- { C(SOFTWARE, SW_PAGE_FAULTS_MIN), "minor-faults", },
- { C(SOFTWARE, SW_PAGE_FAULTS_MAJ), "major-faults", },
- { C(SOFTWARE, SW_CONTEXT_SWITCHES), "context-switches", },
- { C(SOFTWARE, SW_CONTEXT_SWITCHES), "cs", },
- { C(SOFTWARE, SW_CPU_MIGRATIONS), "cpu-migrations", },
- { C(SOFTWARE, SW_CPU_MIGRATIONS), "migrations", },
+ { CSW(CPU_CLOCK), "cpu-clock", "" },
+ { CSW(TASK_CLOCK), "task-clock", "" },
+ { CSW(PAGE_FAULTS), "page-faults", "faults" },
+ { CSW(PAGE_FAULTS_MIN), "minor-faults", "" },
+ { CSW(PAGE_FAULTS_MAJ), "major-faults", "" },
+ { CSW(CONTEXT_SWITCHES), "context-switches", "cs" },
+ { CSW(CPU_MIGRATIONS), "cpu-migrations", "migrations" },
};
#define __PERF_COUNTER_FIELD(config, name) \
@@ -74,26 +70,70 @@
#define MAX_ALIASES 8
-static char *hw_cache [][MAX_ALIASES] = {
- { "L1-data" , "l1-d", "l1d" },
- { "L1-instruction" , "l1-i", "l1i" },
- { "L2" , "l2" },
- { "Data-TLB" , "dtlb", "d-tlb" },
- { "Instruction-TLB" , "itlb", "i-tlb" },
- { "Branch" , "bpu" , "btb", "bpc" },
+static char *hw_cache[][MAX_ALIASES] = {
+ { "L1-d$", "l1-d", "l1d", "L1-data", },
+ { "L1-i$", "l1-i", "l1i", "L1-instruction", },
+ { "LLC", "L2" },
+ { "dTLB", "d-tlb", "Data-TLB", },
+ { "iTLB", "i-tlb", "Instruction-TLB", },
+ { "branch", "branches", "bpu", "btb", "bpc", },
};
-static char *hw_cache_op [][MAX_ALIASES] = {
- { "Load" , "read" },
- { "Store" , "write" },
- { "Prefetch" , "speculative-read", "speculative-load" },
+static char *hw_cache_op[][MAX_ALIASES] = {
+ { "load", "loads", "read", },
+ { "store", "stores", "write", },
+ { "prefetch", "prefetches", "speculative-read", "speculative-load", },
};
-static char *hw_cache_result [][MAX_ALIASES] = {
- { "Reference" , "ops", "access" },
- { "Miss" },
+static char *hw_cache_result[][MAX_ALIASES] = {
+ { "refs", "Reference", "ops", "access", },
+ { "misses", "miss", },
};
+#define C(x) PERF_COUNT_HW_CACHE_##x
+#define CACHE_READ (1 << C(OP_READ))
+#define CACHE_WRITE (1 << C(OP_WRITE))
+#define CACHE_PREFETCH (1 << C(OP_PREFETCH))
+#define COP(x) (1 << x)
+
+/*
+ * cache operartion stat
+ * L1I : Read and prefetch only
+ * ITLB and BPU : Read-only
+ */
+static unsigned long hw_cache_stat[C(MAX)] = {
+ [C(L1D)] = (CACHE_READ | CACHE_WRITE | CACHE_PREFETCH),
+ [C(L1I)] = (CACHE_READ | CACHE_PREFETCH),
+ [C(LL)] = (CACHE_READ | CACHE_WRITE | CACHE_PREFETCH),
+ [C(DTLB)] = (CACHE_READ | CACHE_WRITE | CACHE_PREFETCH),
+ [C(ITLB)] = (CACHE_READ),
+ [C(BPU)] = (CACHE_READ),
+};
+
+static int is_cache_op_valid(u8 cache_type, u8 cache_op)
+{
+ if (hw_cache_stat[cache_type] & COP(cache_op))
+ return 1; /* valid */
+ else
+ return 0; /* invalid */
+}
+
+static char *event_cache_name(u8 cache_type, u8 cache_op, u8 cache_result)
+{
+ static char name[50];
+
+ if (cache_result) {
+ sprintf(name, "%s-%s-%s", hw_cache[cache_type][0],
+ hw_cache_op[cache_op][0],
+ hw_cache_result[cache_result][0]);
+ } else {
+ sprintf(name, "%s-%s", hw_cache[cache_type][0],
+ hw_cache_op[cache_op][1]);
+ }
+
+ return name;
+}
+
char *event_name(int counter)
{
u64 config = attrs[counter].config;
@@ -113,7 +153,6 @@
case PERF_TYPE_HW_CACHE: {
u8 cache_type, cache_op, cache_result;
- static char name[100];
cache_type = (config >> 0) & 0xff;
if (cache_type > PERF_COUNT_HW_CACHE_MAX)
@@ -127,12 +166,10 @@
if (cache_result > PERF_COUNT_HW_CACHE_RESULT_MAX)
return "unknown-ext-hardware-cache-result";
- sprintf(name, "%s-Cache-%s-%ses",
- hw_cache[cache_type][0],
- hw_cache_op[cache_op][0],
- hw_cache_result[cache_result][0]);
+ if (!is_cache_op_valid(cache_type, cache_op))
+ return "invalid-cache";
- return name;
+ return event_cache_name(cache_type, cache_op, cache_result);
}
case PERF_TYPE_SOFTWARE:
@@ -147,43 +184,74 @@
return "unknown";
}
-static int parse_aliases(const char *str, char *names[][MAX_ALIASES], int size)
+static int parse_aliases(const char **str, char *names[][MAX_ALIASES], int size)
{
int i, j;
+ int n, longest = -1;
for (i = 0; i < size; i++) {
- for (j = 0; j < MAX_ALIASES; j++) {
- if (!names[i][j])
- break;
- if (strcasestr(str, names[i][j]))
- return i;
+ for (j = 0; j < MAX_ALIASES && names[i][j]; j++) {
+ n = strlen(names[i][j]);
+ if (n > longest && !strncasecmp(*str, names[i][j], n))
+ longest = n;
+ }
+ if (longest > 0) {
+ *str += longest;
+ return i;
}
}
return -1;
}
-static int parse_generic_hw_symbols(const char *str, struct perf_counter_attr *attr)
+static int
+parse_generic_hw_event(const char **str, struct perf_counter_attr *attr)
{
- int cache_type = -1, cache_op = 0, cache_result = 0;
+ const char *s = *str;
+ int cache_type = -1, cache_op = -1, cache_result = -1;
- cache_type = parse_aliases(str, hw_cache, PERF_COUNT_HW_CACHE_MAX);
+ cache_type = parse_aliases(&s, hw_cache, PERF_COUNT_HW_CACHE_MAX);
/*
* No fallback - if we cannot get a clear cache type
* then bail out:
*/
if (cache_type == -1)
- return -EINVAL;
+ return 0;
- cache_op = parse_aliases(str, hw_cache_op, PERF_COUNT_HW_CACHE_OP_MAX);
+ while ((cache_op == -1 || cache_result == -1) && *s == '-') {
+ ++s;
+
+ if (cache_op == -1) {
+ cache_op = parse_aliases(&s, hw_cache_op,
+ PERF_COUNT_HW_CACHE_OP_MAX);
+ if (cache_op >= 0) {
+ if (!is_cache_op_valid(cache_type, cache_op))
+ return 0;
+ continue;
+ }
+ }
+
+ if (cache_result == -1) {
+ cache_result = parse_aliases(&s, hw_cache_result,
+ PERF_COUNT_HW_CACHE_RESULT_MAX);
+ if (cache_result >= 0)
+ continue;
+ }
+
+ /*
+ * Can't parse this as a cache op or result, so back up
+ * to the '-'.
+ */
+ --s;
+ break;
+ }
+
/*
* Fall back to reads:
*/
if (cache_op == -1)
cache_op = PERF_COUNT_HW_CACHE_OP_READ;
- cache_result = parse_aliases(str, hw_cache_result,
- PERF_COUNT_HW_CACHE_RESULT_MAX);
/*
* Fall back to accesses:
*/
@@ -193,6 +261,110 @@
attr->config = cache_type | (cache_op << 8) | (cache_result << 16);
attr->type = PERF_TYPE_HW_CACHE;
+ *str = s;
+ return 1;
+}
+
+static int check_events(const char *str, unsigned int i)
+{
+ int n;
+
+ n = strlen(event_symbols[i].symbol);
+ if (!strncmp(str, event_symbols[i].symbol, n))
+ return n;
+
+ n = strlen(event_symbols[i].alias);
+ if (n)
+ if (!strncmp(str, event_symbols[i].alias, n))
+ return n;
+ return 0;
+}
+
+static int
+parse_symbolic_event(const char **strp, struct perf_counter_attr *attr)
+{
+ const char *str = *strp;
+ unsigned int i;
+ int n;
+
+ for (i = 0; i < ARRAY_SIZE(event_symbols); i++) {
+ n = check_events(str, i);
+ if (n > 0) {
+ attr->type = event_symbols[i].type;
+ attr->config = event_symbols[i].config;
+ *strp = str + n;
+ return 1;
+ }
+ }
+ return 0;
+}
+
+static int parse_raw_event(const char **strp, struct perf_counter_attr *attr)
+{
+ const char *str = *strp;
+ u64 config;
+ int n;
+
+ if (*str != 'r')
+ return 0;
+ n = hex2u64(str + 1, &config);
+ if (n > 0) {
+ *strp = str + n + 1;
+ attr->type = PERF_TYPE_RAW;
+ attr->config = config;
+ return 1;
+ }
+ return 0;
+}
+
+static int
+parse_numeric_event(const char **strp, struct perf_counter_attr *attr)
+{
+ const char *str = *strp;
+ char *endp;
+ unsigned long type;
+ u64 config;
+
+ type = strtoul(str, &endp, 0);
+ if (endp > str && type < PERF_TYPE_MAX && *endp == ':') {
+ str = endp + 1;
+ config = strtoul(str, &endp, 0);
+ if (endp > str) {
+ attr->type = type;
+ attr->config = config;
+ *strp = endp;
+ return 1;
+ }
+ }
+ return 0;
+}
+
+static int
+parse_event_modifier(const char **strp, struct perf_counter_attr *attr)
+{
+ const char *str = *strp;
+ int eu = 1, ek = 1, eh = 1;
+
+ if (*str++ != ':')
+ return 0;
+ while (*str) {
+ if (*str == 'u')
+ eu = 0;
+ else if (*str == 'k')
+ ek = 0;
+ else if (*str == 'h')
+ eh = 0;
+ else
+ break;
+ ++str;
+ }
+ if (str >= *strp + 2) {
+ *strp = str;
+ attr->exclude_user = eu;
+ attr->exclude_kernel = ek;
+ attr->exclude_hv = eh;
+ return 1;
+ }
return 0;
}
@@ -200,75 +372,43 @@
* Each event can have multiple symbolic names.
* Symbolic names are (almost) exactly matched.
*/
-static int parse_event_symbols(const char *str, struct perf_counter_attr *attr)
+static int parse_event_symbols(const char **str, struct perf_counter_attr *attr)
{
- u64 config, id;
- int type;
- unsigned int i;
- const char *sep, *pstr;
-
- if (str[0] == 'r' && hex2u64(str + 1, &config) > 0) {
- attr->type = PERF_TYPE_RAW;
- attr->config = config;
-
+ if (!(parse_raw_event(str, attr) ||
+ parse_numeric_event(str, attr) ||
+ parse_symbolic_event(str, attr) ||
+ parse_generic_hw_event(str, attr)))
return 0;
- }
- pstr = str;
- sep = strchr(pstr, ':');
- if (sep) {
- type = atoi(pstr);
- pstr = sep + 1;
- id = atoi(pstr);
- sep = strchr(pstr, ':');
- if (sep) {
- pstr = sep + 1;
- if (strchr(pstr, 'k'))
- attr->exclude_user = 1;
- if (strchr(pstr, 'u'))
- attr->exclude_kernel = 1;
- }
- attr->type = type;
- attr->config = id;
+ parse_event_modifier(str, attr);
- return 0;
- }
-
- for (i = 0; i < ARRAY_SIZE(event_symbols); i++) {
- if (!strncmp(str, event_symbols[i].symbol,
- strlen(event_symbols[i].symbol))) {
-
- attr->type = event_symbols[i].type;
- attr->config = event_symbols[i].config;
-
- return 0;
- }
- }
-
- return parse_generic_hw_symbols(str, attr);
+ return 1;
}
-int parse_events(const struct option *opt, const char *str, int unset)
+int parse_events(const struct option *opt __used, const char *str, int unset __used)
{
struct perf_counter_attr attr;
- int ret;
- memset(&attr, 0, sizeof(attr));
-again:
- if (nr_counters == MAX_COUNTERS)
- return -1;
+ for (;;) {
+ if (nr_counters == MAX_COUNTERS)
+ return -1;
- ret = parse_event_symbols(str, &attr);
- if (ret < 0)
- return ret;
+ memset(&attr, 0, sizeof(attr));
+ if (!parse_event_symbols(&str, &attr))
+ return -1;
- attrs[nr_counters] = attr;
- nr_counters++;
+ if (!(*str == 0 || *str == ',' || isspace(*str)))
+ return -1;
- str = strstr(str, ",");
- if (str) {
- str++;
- goto again;
+ attrs[nr_counters] = attr;
+ nr_counters++;
+
+ if (*str == 0)
+ break;
+ if (*str == ',')
+ ++str;
+ while (isspace(*str))
+ ++str;
}
return 0;
@@ -288,7 +428,8 @@
void print_events(void)
{
struct event_symbol *syms = event_symbols;
- unsigned int i, type, prev_type = -1;
+ unsigned int i, type, op, prev_type = -1;
+ char name[40];
fprintf(stderr, "\n");
fprintf(stderr, "List of pre-defined events (to be used in -e):\n");
@@ -301,14 +442,33 @@
if (type != prev_type)
fprintf(stderr, "\n");
- fprintf(stderr, " %-30s [%s]\n", syms->symbol,
+ if (strlen(syms->alias))
+ sprintf(name, "%s OR %s", syms->symbol, syms->alias);
+ else
+ strcpy(name, syms->symbol);
+ fprintf(stderr, " %-40s [%s]\n", name,
event_type_descriptors[type]);
prev_type = type;
}
fprintf(stderr, "\n");
- fprintf(stderr, " %-30s [raw hardware event descriptor]\n",
+ for (type = 0; type < PERF_COUNT_HW_CACHE_MAX; type++) {
+ for (op = 0; op < PERF_COUNT_HW_CACHE_OP_MAX; op++) {
+ /* skip invalid cache type */
+ if (!is_cache_op_valid(type, op))
+ continue;
+
+ for (i = 0; i < PERF_COUNT_HW_CACHE_RESULT_MAX; i++) {
+ fprintf(stderr, " %-40s [%s]\n",
+ event_cache_name(type, op, i),
+ event_type_descriptors[4]);
+ }
+ }
+ }
+
+ fprintf(stderr, "\n");
+ fprintf(stderr, " %-40s [raw hardware event descriptor]\n",
"rNNN");
fprintf(stderr, "\n");
diff --git a/tools/perf/util/parse-options.c b/tools/perf/util/parse-options.c
index b3affb1..1bf6719 100644
--- a/tools/perf/util/parse-options.c
+++ b/tools/perf/util/parse-options.c
@@ -20,7 +20,8 @@
if (p->opt) {
*arg = p->opt;
p->opt = NULL;
- } else if (p->argc == 1 && (opt->flags & PARSE_OPT_LASTARG_DEFAULT)) {
+ } else if ((opt->flags & PARSE_OPT_LASTARG_DEFAULT) && (p->argc == 1 ||
+ **(p->argv + 1) == '-')) {
*arg = (const char *)opt->defval;
} else if (p->argc > 1) {
p->argc--;
@@ -485,7 +486,7 @@
}
-int parse_opt_verbosity_cb(const struct option *opt, const char *arg,
+int parse_opt_verbosity_cb(const struct option *opt, const char *arg __used,
int unset)
{
int *target = opt->value;
diff --git a/tools/perf/util/parse-options.h b/tools/perf/util/parse-options.h
index a1039a6..8aa3464 100644
--- a/tools/perf/util/parse-options.h
+++ b/tools/perf/util/parse-options.h
@@ -90,21 +90,22 @@
intptr_t defval;
};
-#define OPT_END() { OPTION_END }
-#define OPT_ARGUMENT(l, h) { OPTION_ARGUMENT, 0, (l), NULL, NULL, (h) }
-#define OPT_GROUP(h) { OPTION_GROUP, 0, NULL, NULL, NULL, (h) }
-#define OPT_BIT(s, l, v, h, b) { OPTION_BIT, (s), (l), (v), NULL, (h), 0, NULL, (b) }
-#define OPT_BOOLEAN(s, l, v, h) { OPTION_BOOLEAN, (s), (l), (v), NULL, (h) }
-#define OPT_SET_INT(s, l, v, h, i) { OPTION_SET_INT, (s), (l), (v), NULL, (h), 0, NULL, (i) }
-#define OPT_SET_PTR(s, l, v, h, p) { OPTION_SET_PTR, (s), (l), (v), NULL, (h), 0, NULL, (p) }
-#define OPT_INTEGER(s, l, v, h) { OPTION_INTEGER, (s), (l), (v), NULL, (h) }
-#define OPT_LONG(s, l, v, h) { OPTION_LONG, (s), (l), (v), NULL, (h) }
-#define OPT_STRING(s, l, v, a, h) { OPTION_STRING, (s), (l), (v), (a), (h) }
+#define OPT_END() { .type = OPTION_END }
+#define OPT_ARGUMENT(l, h) { .type = OPTION_ARGUMENT, .long_name = (l), .help = (h) }
+#define OPT_GROUP(h) { .type = OPTION_GROUP, .help = (h) }
+#define OPT_BIT(s, l, v, h, b) { .type = OPTION_BIT, .short_name = (s), .long_name = (l), .value = (v), .help = (h), .defval = (b) }
+#define OPT_BOOLEAN(s, l, v, h) { .type = OPTION_BOOLEAN, .short_name = (s), .long_name = (l), .value = (v), .help = (h) }
+#define OPT_SET_INT(s, l, v, h, i) { .type = OPTION_SET_INT, .short_name = (s), .long_name = (l), .value = (v), .help = (h), .defval = (i) }
+#define OPT_SET_PTR(s, l, v, h, p) { .type = OPTION_SET_PTR, .short_name = (s), .long_name = (l), .value = (v), .help = (h), .defval = (p) }
+#define OPT_INTEGER(s, l, v, h) { .type = OPTION_INTEGER, .short_name = (s), .long_name = (l), .value = (v), .help = (h) }
+#define OPT_LONG(s, l, v, h) { .type = OPTION_LONG, .short_name = (s), .long_name = (l), .value = (v), .help = (h) }
+#define OPT_STRING(s, l, v, a, h) { .type = OPTION_STRING, .short_name = (s), .long_name = (l), .value = (v), (a), .help = (h) }
#define OPT_DATE(s, l, v, h) \
- { OPTION_CALLBACK, (s), (l), (v), "time",(h), 0, \
- parse_opt_approxidate_cb }
+ { .type = OPTION_CALLBACK, .short_name = (s), .long_name = (l), .value = (v), .argh = "time", .help = (h), .callback = parse_opt_approxidate_cb }
#define OPT_CALLBACK(s, l, v, a, h, f) \
- { OPTION_CALLBACK, (s), (l), (v), (a), (h), 0, (f) }
+ { .type = OPTION_CALLBACK, .short_name = (s), .long_name = (l), .value = (v), (a), .help = (h), .callback = (f) }
+#define OPT_CALLBACK_DEFAULT(s, l, v, a, h, f, d) \
+ { .type = OPTION_CALLBACK, .short_name = (s), .long_name = (l), .value = (v), (a), .help = (h), .callback = (f), .defval = (intptr_t)d, .flags = PARSE_OPT_LASTARG_DEFAULT }
/* parse_options() will filter out the processed options and leave the
* non-option argments in argv[].
diff --git a/tools/perf/util/quote.c b/tools/perf/util/quote.c
index f18c521..c6e5dc0 100644
--- a/tools/perf/util/quote.c
+++ b/tools/perf/util/quote.c
@@ -162,12 +162,16 @@
return sq_lookup[(unsigned char)c] + quote_path_fully > 0;
}
-/* returns the longest prefix not needing a quote up to maxlen if positive.
- This stops at the first \0 because it's marked as a character needing an
- escape */
-static size_t next_quote_pos(const char *s, ssize_t maxlen)
+/*
+ * Returns the longest prefix not needing a quote up to maxlen if
+ * positive.
+ * This stops at the first \0 because it's marked as a character
+ * needing an escape.
+ */
+static ssize_t next_quote_pos(const char *s, ssize_t maxlen)
{
- size_t len;
+ ssize_t len;
+
if (maxlen < 0) {
for (len = 0; !sq_must_quote(s[len]); len++);
} else {
@@ -192,22 +196,22 @@
static size_t quote_c_style_counted(const char *name, ssize_t maxlen,
struct strbuf *sb, FILE *fp, int no_dq)
{
-#undef EMIT
-#define EMIT(c) \
- do { \
- if (sb) strbuf_addch(sb, (c)); \
- if (fp) fputc((c), fp); \
- count++; \
- } while (0)
-#define EMITBUF(s, l) \
- do { \
- int __ret; \
- if (sb) strbuf_add(sb, (s), (l)); \
- if (fp) __ret = fwrite((s), (l), 1, fp); \
- count += (l); \
+#define EMIT(c) \
+ do { \
+ if (sb) strbuf_addch(sb, (c)); \
+ if (fp) fputc((c), fp); \
+ count++; \
} while (0)
- size_t len, count = 0;
+#define EMITBUF(s, l) \
+ do { \
+ int __ret; \
+ if (sb) strbuf_add(sb, (s), (l)); \
+ if (fp) __ret = fwrite((s), (l), 1, fp); \
+ count += (l); \
+ } while (0)
+
+ ssize_t len, count = 0;
const char *p = name;
for (;;) {
@@ -273,8 +277,8 @@
fputc(terminator, fp);
}
-extern void write_name_quotedpfx(const char *pfx, size_t pfxlen,
- const char *name, FILE *fp, int terminator)
+void write_name_quotedpfx(const char *pfx, ssize_t pfxlen,
+ const char *name, FILE *fp, int terminator)
{
int needquote = 0;
@@ -306,7 +310,7 @@
len = strlen(in);
/* "../" prefix itself does not need quoting, but "in" might. */
- needquote = next_quote_pos(in, len) < len;
+ needquote = (next_quote_pos(in, len) < len);
strbuf_setlen(out, 0);
strbuf_grow(out, len);
diff --git a/tools/perf/util/quote.h b/tools/perf/util/quote.h
index 5dfad89..a5454a1 100644
--- a/tools/perf/util/quote.h
+++ b/tools/perf/util/quote.h
@@ -53,7 +53,7 @@
extern void quote_two_c_style(struct strbuf *, const char *, const char *, int);
extern void write_name_quoted(const char *name, FILE *, int terminator);
-extern void write_name_quotedpfx(const char *pfx, size_t pfxlen,
+extern void write_name_quotedpfx(const char *pfx, ssize_t pfxlen,
const char *name, FILE *, int terminator);
/* quote path as relative to the given prefix */
diff --git a/tools/perf/util/rbtree.c b/tools/perf/util/rbtree.c
deleted file mode 100644
index b15ba9c..0000000
--- a/tools/perf/util/rbtree.c
+++ /dev/null
@@ -1,383 +0,0 @@
-/*
- Red Black Trees
- (C) 1999 Andrea Arcangeli <andrea@suse.de>
- (C) 2002 David Woodhouse <dwmw2@infradead.org>
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-
- linux/lib/rbtree.c
-*/
-
-#include "rbtree.h"
-
-static void __rb_rotate_left(struct rb_node *node, struct rb_root *root)
-{
- struct rb_node *right = node->rb_right;
- struct rb_node *parent = rb_parent(node);
-
- if ((node->rb_right = right->rb_left))
- rb_set_parent(right->rb_left, node);
- right->rb_left = node;
-
- rb_set_parent(right, parent);
-
- if (parent)
- {
- if (node == parent->rb_left)
- parent->rb_left = right;
- else
- parent->rb_right = right;
- }
- else
- root->rb_node = right;
- rb_set_parent(node, right);
-}
-
-static void __rb_rotate_right(struct rb_node *node, struct rb_root *root)
-{
- struct rb_node *left = node->rb_left;
- struct rb_node *parent = rb_parent(node);
-
- if ((node->rb_left = left->rb_right))
- rb_set_parent(left->rb_right, node);
- left->rb_right = node;
-
- rb_set_parent(left, parent);
-
- if (parent)
- {
- if (node == parent->rb_right)
- parent->rb_right = left;
- else
- parent->rb_left = left;
- }
- else
- root->rb_node = left;
- rb_set_parent(node, left);
-}
-
-void rb_insert_color(struct rb_node *node, struct rb_root *root)
-{
- struct rb_node *parent, *gparent;
-
- while ((parent = rb_parent(node)) && rb_is_red(parent))
- {
- gparent = rb_parent(parent);
-
- if (parent == gparent->rb_left)
- {
- {
- register struct rb_node *uncle = gparent->rb_right;
- if (uncle && rb_is_red(uncle))
- {
- rb_set_black(uncle);
- rb_set_black(parent);
- rb_set_red(gparent);
- node = gparent;
- continue;
- }
- }
-
- if (parent->rb_right == node)
- {
- register struct rb_node *tmp;
- __rb_rotate_left(parent, root);
- tmp = parent;
- parent = node;
- node = tmp;
- }
-
- rb_set_black(parent);
- rb_set_red(gparent);
- __rb_rotate_right(gparent, root);
- } else {
- {
- register struct rb_node *uncle = gparent->rb_left;
- if (uncle && rb_is_red(uncle))
- {
- rb_set_black(uncle);
- rb_set_black(parent);
- rb_set_red(gparent);
- node = gparent;
- continue;
- }
- }
-
- if (parent->rb_left == node)
- {
- register struct rb_node *tmp;
- __rb_rotate_right(parent, root);
- tmp = parent;
- parent = node;
- node = tmp;
- }
-
- rb_set_black(parent);
- rb_set_red(gparent);
- __rb_rotate_left(gparent, root);
- }
- }
-
- rb_set_black(root->rb_node);
-}
-
-static void __rb_erase_color(struct rb_node *node, struct rb_node *parent,
- struct rb_root *root)
-{
- struct rb_node *other;
-
- while ((!node || rb_is_black(node)) && node != root->rb_node)
- {
- if (parent->rb_left == node)
- {
- other = parent->rb_right;
- if (rb_is_red(other))
- {
- rb_set_black(other);
- rb_set_red(parent);
- __rb_rotate_left(parent, root);
- other = parent->rb_right;
- }
- if ((!other->rb_left || rb_is_black(other->rb_left)) &&
- (!other->rb_right || rb_is_black(other->rb_right)))
- {
- rb_set_red(other);
- node = parent;
- parent = rb_parent(node);
- }
- else
- {
- if (!other->rb_right || rb_is_black(other->rb_right))
- {
- rb_set_black(other->rb_left);
- rb_set_red(other);
- __rb_rotate_right(other, root);
- other = parent->rb_right;
- }
- rb_set_color(other, rb_color(parent));
- rb_set_black(parent);
- rb_set_black(other->rb_right);
- __rb_rotate_left(parent, root);
- node = root->rb_node;
- break;
- }
- }
- else
- {
- other = parent->rb_left;
- if (rb_is_red(other))
- {
- rb_set_black(other);
- rb_set_red(parent);
- __rb_rotate_right(parent, root);
- other = parent->rb_left;
- }
- if ((!other->rb_left || rb_is_black(other->rb_left)) &&
- (!other->rb_right || rb_is_black(other->rb_right)))
- {
- rb_set_red(other);
- node = parent;
- parent = rb_parent(node);
- }
- else
- {
- if (!other->rb_left || rb_is_black(other->rb_left))
- {
- rb_set_black(other->rb_right);
- rb_set_red(other);
- __rb_rotate_left(other, root);
- other = parent->rb_left;
- }
- rb_set_color(other, rb_color(parent));
- rb_set_black(parent);
- rb_set_black(other->rb_left);
- __rb_rotate_right(parent, root);
- node = root->rb_node;
- break;
- }
- }
- }
- if (node)
- rb_set_black(node);
-}
-
-void rb_erase(struct rb_node *node, struct rb_root *root)
-{
- struct rb_node *child, *parent;
- int color;
-
- if (!node->rb_left)
- child = node->rb_right;
- else if (!node->rb_right)
- child = node->rb_left;
- else
- {
- struct rb_node *old = node, *left;
-
- node = node->rb_right;
- while ((left = node->rb_left) != NULL)
- node = left;
- child = node->rb_right;
- parent = rb_parent(node);
- color = rb_color(node);
-
- if (child)
- rb_set_parent(child, parent);
- if (parent == old) {
- parent->rb_right = child;
- parent = node;
- } else
- parent->rb_left = child;
-
- node->rb_parent_color = old->rb_parent_color;
- node->rb_right = old->rb_right;
- node->rb_left = old->rb_left;
-
- if (rb_parent(old))
- {
- if (rb_parent(old)->rb_left == old)
- rb_parent(old)->rb_left = node;
- else
- rb_parent(old)->rb_right = node;
- } else
- root->rb_node = node;
-
- rb_set_parent(old->rb_left, node);
- if (old->rb_right)
- rb_set_parent(old->rb_right, node);
- goto color;
- }
-
- parent = rb_parent(node);
- color = rb_color(node);
-
- if (child)
- rb_set_parent(child, parent);
- if (parent)
- {
- if (parent->rb_left == node)
- parent->rb_left = child;
- else
- parent->rb_right = child;
- }
- else
- root->rb_node = child;
-
- color:
- if (color == RB_BLACK)
- __rb_erase_color(child, parent, root);
-}
-
-/*
- * This function returns the first node (in sort order) of the tree.
- */
-struct rb_node *rb_first(const struct rb_root *root)
-{
- struct rb_node *n;
-
- n = root->rb_node;
- if (!n)
- return NULL;
- while (n->rb_left)
- n = n->rb_left;
- return n;
-}
-
-struct rb_node *rb_last(const struct rb_root *root)
-{
- struct rb_node *n;
-
- n = root->rb_node;
- if (!n)
- return NULL;
- while (n->rb_right)
- n = n->rb_right;
- return n;
-}
-
-struct rb_node *rb_next(const struct rb_node *node)
-{
- struct rb_node *parent;
-
- if (rb_parent(node) == node)
- return NULL;
-
- /* If we have a right-hand child, go down and then left as far
- as we can. */
- if (node->rb_right) {
- node = node->rb_right;
- while (node->rb_left)
- node=node->rb_left;
- return (struct rb_node *)node;
- }
-
- /* No right-hand children. Everything down and left is
- smaller than us, so any 'next' node must be in the general
- direction of our parent. Go up the tree; any time the
- ancestor is a right-hand child of its parent, keep going
- up. First time it's a left-hand child of its parent, said
- parent is our 'next' node. */
- while ((parent = rb_parent(node)) && node == parent->rb_right)
- node = parent;
-
- return parent;
-}
-
-struct rb_node *rb_prev(const struct rb_node *node)
-{
- struct rb_node *parent;
-
- if (rb_parent(node) == node)
- return NULL;
-
- /* If we have a left-hand child, go down and then right as far
- as we can. */
- if (node->rb_left) {
- node = node->rb_left;
- while (node->rb_right)
- node=node->rb_right;
- return (struct rb_node *)node;
- }
-
- /* No left-hand children. Go up till we find an ancestor which
- is a right-hand child of its parent */
- while ((parent = rb_parent(node)) && node == parent->rb_left)
- node = parent;
-
- return parent;
-}
-
-void rb_replace_node(struct rb_node *victim, struct rb_node *new,
- struct rb_root *root)
-{
- struct rb_node *parent = rb_parent(victim);
-
- /* Set the surrounding nodes to point to the replacement */
- if (parent) {
- if (victim == parent->rb_left)
- parent->rb_left = new;
- else
- parent->rb_right = new;
- } else {
- root->rb_node = new;
- }
- if (victim->rb_left)
- rb_set_parent(victim->rb_left, new);
- if (victim->rb_right)
- rb_set_parent(victim->rb_right, new);
-
- /* Copy the pointers/colour from the victim to the replacement */
- *new = *victim;
-}
diff --git a/tools/perf/util/rbtree.h b/tools/perf/util/rbtree.h
deleted file mode 100644
index 6bdc488..0000000
--- a/tools/perf/util/rbtree.h
+++ /dev/null
@@ -1,171 +0,0 @@
-/*
- Red Black Trees
- (C) 1999 Andrea Arcangeli <andrea@suse.de>
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-
- linux/include/linux/rbtree.h
-
- To use rbtrees you'll have to implement your own insert and search cores.
- This will avoid us to use callbacks and to drop drammatically performances.
- I know it's not the cleaner way, but in C (not in C++) to get
- performances and genericity...
-
- Some example of insert and search follows here. The search is a plain
- normal search over an ordered tree. The insert instead must be implemented
- int two steps: as first thing the code must insert the element in
- order as a red leaf in the tree, then the support library function
- rb_insert_color() must be called. Such function will do the
- not trivial work to rebalance the rbtree if necessary.
-
------------------------------------------------------------------------
-static inline struct page * rb_search_page_cache(struct inode * inode,
- unsigned long offset)
-{
- struct rb_node * n = inode->i_rb_page_cache.rb_node;
- struct page * page;
-
- while (n)
- {
- page = rb_entry(n, struct page, rb_page_cache);
-
- if (offset < page->offset)
- n = n->rb_left;
- else if (offset > page->offset)
- n = n->rb_right;
- else
- return page;
- }
- return NULL;
-}
-
-static inline struct page * __rb_insert_page_cache(struct inode * inode,
- unsigned long offset,
- struct rb_node * node)
-{
- struct rb_node ** p = &inode->i_rb_page_cache.rb_node;
- struct rb_node * parent = NULL;
- struct page * page;
-
- while (*p)
- {
- parent = *p;
- page = rb_entry(parent, struct page, rb_page_cache);
-
- if (offset < page->offset)
- p = &(*p)->rb_left;
- else if (offset > page->offset)
- p = &(*p)->rb_right;
- else
- return page;
- }
-
- rb_link_node(node, parent, p);
-
- return NULL;
-}
-
-static inline struct page * rb_insert_page_cache(struct inode * inode,
- unsigned long offset,
- struct rb_node * node)
-{
- struct page * ret;
- if ((ret = __rb_insert_page_cache(inode, offset, node)))
- goto out;
- rb_insert_color(node, &inode->i_rb_page_cache);
- out:
- return ret;
-}
------------------------------------------------------------------------
-*/
-
-#ifndef _LINUX_RBTREE_H
-#define _LINUX_RBTREE_H
-
-#include <stddef.h>
-
-/**
- * container_of - cast a member of a structure out to the containing structure
- * @ptr: the pointer to the member.
- * @type: the type of the container struct this is embedded in.
- * @member: the name of the member within the struct.
- *
- */
-#define container_of(ptr, type, member) ({ \
- const typeof( ((type *)0)->member ) *__mptr = (ptr); \
- (type *)( (char *)__mptr - offsetof(type,member) );})
-
-struct rb_node
-{
- unsigned long rb_parent_color;
-#define RB_RED 0
-#define RB_BLACK 1
- struct rb_node *rb_right;
- struct rb_node *rb_left;
-} __attribute__((aligned(sizeof(long))));
- /* The alignment might seem pointless, but allegedly CRIS needs it */
-
-struct rb_root
-{
- struct rb_node *rb_node;
-};
-
-
-#define rb_parent(r) ((struct rb_node *)((r)->rb_parent_color & ~3))
-#define rb_color(r) ((r)->rb_parent_color & 1)
-#define rb_is_red(r) (!rb_color(r))
-#define rb_is_black(r) rb_color(r)
-#define rb_set_red(r) do { (r)->rb_parent_color &= ~1; } while (0)
-#define rb_set_black(r) do { (r)->rb_parent_color |= 1; } while (0)
-
-static inline void rb_set_parent(struct rb_node *rb, struct rb_node *p)
-{
- rb->rb_parent_color = (rb->rb_parent_color & 3) | (unsigned long)p;
-}
-static inline void rb_set_color(struct rb_node *rb, int color)
-{
- rb->rb_parent_color = (rb->rb_parent_color & ~1) | color;
-}
-
-#define RB_ROOT (struct rb_root) { NULL, }
-#define rb_entry(ptr, type, member) container_of(ptr, type, member)
-
-#define RB_EMPTY_ROOT(root) ((root)->rb_node == NULL)
-#define RB_EMPTY_NODE(node) (rb_parent(node) == node)
-#define RB_CLEAR_NODE(node) (rb_set_parent(node, node))
-
-extern void rb_insert_color(struct rb_node *, struct rb_root *);
-extern void rb_erase(struct rb_node *, struct rb_root *);
-
-/* Find logical next and previous nodes in a tree */
-extern struct rb_node *rb_next(const struct rb_node *);
-extern struct rb_node *rb_prev(const struct rb_node *);
-extern struct rb_node *rb_first(const struct rb_root *);
-extern struct rb_node *rb_last(const struct rb_root *);
-
-/* Fast replacement of a single node without remove/rebalance/add/rebalance */
-extern void rb_replace_node(struct rb_node *victim, struct rb_node *new,
- struct rb_root *root);
-
-static inline void rb_link_node(struct rb_node * node, struct rb_node * parent,
- struct rb_node ** rb_link)
-{
- node->rb_parent_color = (unsigned long )parent;
- node->rb_left = node->rb_right = NULL;
-
- *rb_link = node;
-}
-
-#endif /* _LINUX_RBTREE_H */
diff --git a/tools/perf/util/run-command.c b/tools/perf/util/run-command.c
index b2f5e85..a393534 100644
--- a/tools/perf/util/run-command.c
+++ b/tools/perf/util/run-command.c
@@ -65,7 +65,6 @@
cmd->err = fderr[0];
}
-#ifndef __MINGW32__
fflush(NULL);
cmd->pid = fork();
if (!cmd->pid) {
@@ -118,71 +117,6 @@
}
exit(127);
}
-#else
- int s0 = -1, s1 = -1, s2 = -1; /* backups of stdin, stdout, stderr */
- const char **sargv = cmd->argv;
- char **env = environ;
-
- if (cmd->no_stdin) {
- s0 = dup(0);
- dup_devnull(0);
- } else if (need_in) {
- s0 = dup(0);
- dup2(fdin[0], 0);
- } else if (cmd->in) {
- s0 = dup(0);
- dup2(cmd->in, 0);
- }
-
- if (cmd->no_stderr) {
- s2 = dup(2);
- dup_devnull(2);
- } else if (need_err) {
- s2 = dup(2);
- dup2(fderr[1], 2);
- }
-
- if (cmd->no_stdout) {
- s1 = dup(1);
- dup_devnull(1);
- } else if (cmd->stdout_to_stderr) {
- s1 = dup(1);
- dup2(2, 1);
- } else if (need_out) {
- s1 = dup(1);
- dup2(fdout[1], 1);
- } else if (cmd->out > 1) {
- s1 = dup(1);
- dup2(cmd->out, 1);
- }
-
- if (cmd->dir)
- die("chdir in start_command() not implemented");
- if (cmd->env) {
- env = copy_environ();
- for (; *cmd->env; cmd->env++)
- env = env_setenv(env, *cmd->env);
- }
-
- if (cmd->perf_cmd) {
- cmd->argv = prepare_perf_cmd(cmd->argv);
- }
-
- cmd->pid = mingw_spawnvpe(cmd->argv[0], cmd->argv, env);
-
- if (cmd->env)
- free_environ(env);
- if (cmd->perf_cmd)
- free(cmd->argv);
-
- cmd->argv = sargv;
- if (s0 >= 0)
- dup2(s0, 0), close(s0);
- if (s1 >= 0)
- dup2(s1, 1), close(s1);
- if (s2 >= 0)
- dup2(s2, 2), close(s2);
-#endif
if (cmd->pid < 0) {
int err = errno;
@@ -288,14 +222,6 @@
return run_command(&cmd);
}
-#ifdef __MINGW32__
-static __stdcall unsigned run_thread(void *data)
-{
- struct async *async = data;
- return async->proc(async->fd_for_proc, async->data);
-}
-#endif
-
int start_async(struct async *async)
{
int pipe_out[2];
@@ -304,7 +230,6 @@
return error("cannot create pipe: %s", strerror(errno));
async->out = pipe_out[0];
-#ifndef __MINGW32__
/* Flush stdio before fork() to avoid cloning buffers */
fflush(NULL);
@@ -319,33 +244,17 @@
exit(!!async->proc(pipe_out[1], async->data));
}
close(pipe_out[1]);
-#else
- async->fd_for_proc = pipe_out[1];
- async->tid = (HANDLE) _beginthreadex(NULL, 0, run_thread, async, 0, NULL);
- if (!async->tid) {
- error("cannot create thread: %s", strerror(errno));
- close_pair(pipe_out);
- return -1;
- }
-#endif
+
return 0;
}
int finish_async(struct async *async)
{
-#ifndef __MINGW32__
int ret = 0;
if (wait_or_whine(async->pid))
ret = error("waitpid (async) failed");
-#else
- DWORD ret = 0;
- if (WaitForSingleObject(async->tid, INFINITE) != WAIT_OBJECT_0)
- ret = error("waiting for thread failed: %lu", GetLastError());
- else if (!GetExitCodeThread(async->tid, &ret))
- ret = error("cannot get thread exit code: %lu", GetLastError());
- CloseHandle(async->tid);
-#endif
+
return ret;
}
diff --git a/tools/perf/util/run-command.h b/tools/perf/util/run-command.h
index 328289f..cc1837d 100644
--- a/tools/perf/util/run-command.h
+++ b/tools/perf/util/run-command.h
@@ -79,12 +79,7 @@
int (*proc)(int fd, void *data);
void *data;
int out; /* caller reads from here and closes it */
-#ifndef __MINGW32__
pid_t pid;
-#else
- HANDLE tid;
- int fd_for_proc;
-#endif
};
int start_async(struct async *async);
diff --git a/tools/perf/util/strbuf.c b/tools/perf/util/strbuf.c
index eaba093..5249d5a 100644
--- a/tools/perf/util/strbuf.c
+++ b/tools/perf/util/strbuf.c
@@ -16,7 +16,7 @@
*/
char strbuf_slopbuf[1];
-void strbuf_init(struct strbuf *sb, size_t hint)
+void strbuf_init(struct strbuf *sb, ssize_t hint)
{
sb->alloc = sb->len = 0;
sb->buf = strbuf_slopbuf;
@@ -92,7 +92,8 @@
void strbuf_tolower(struct strbuf *sb)
{
- int i;
+ unsigned int i;
+
for (i = 0; i < sb->len; i++)
sb->buf[i] = tolower(sb->buf[i]);
}
@@ -259,12 +260,12 @@
res = fread(sb->buf + sb->len, 1, size, f);
if (res > 0)
strbuf_setlen(sb, sb->len + res);
- else if (res < 0 && oldalloc == 0)
+ else if (oldalloc == 0)
strbuf_release(sb);
return res;
}
-ssize_t strbuf_read(struct strbuf *sb, int fd, size_t hint)
+ssize_t strbuf_read(struct strbuf *sb, int fd, ssize_t hint)
{
size_t oldlen = sb->len;
size_t oldalloc = sb->alloc;
@@ -293,7 +294,7 @@
#define STRBUF_MAXLINK (2*PATH_MAX)
-int strbuf_readlink(struct strbuf *sb, const char *path, size_t hint)
+int strbuf_readlink(struct strbuf *sb, const char *path, ssize_t hint)
{
size_t oldalloc = sb->alloc;
@@ -301,7 +302,7 @@
hint = 32;
while (hint < STRBUF_MAXLINK) {
- int len;
+ ssize_t len;
strbuf_grow(sb, hint);
len = readlink(path, sb->buf, hint);
@@ -343,7 +344,7 @@
return 0;
}
-int strbuf_read_file(struct strbuf *sb, const char *path, size_t hint)
+int strbuf_read_file(struct strbuf *sb, const char *path, ssize_t hint)
{
int fd, len;
diff --git a/tools/perf/util/strbuf.h b/tools/perf/util/strbuf.h
index 9ee908a..d2aa86c 100644
--- a/tools/perf/util/strbuf.h
+++ b/tools/perf/util/strbuf.h
@@ -50,7 +50,7 @@
#define STRBUF_INIT { 0, 0, strbuf_slopbuf }
/*----- strbuf life cycle -----*/
-extern void strbuf_init(struct strbuf *, size_t);
+extern void strbuf_init(struct strbuf *buf, ssize_t hint);
extern void strbuf_release(struct strbuf *);
extern char *strbuf_detach(struct strbuf *, size_t *);
extern void strbuf_attach(struct strbuf *, void *, size_t, size_t);
@@ -61,7 +61,7 @@
}
/*----- strbuf size related -----*/
-static inline size_t strbuf_avail(const struct strbuf *sb) {
+static inline ssize_t strbuf_avail(const struct strbuf *sb) {
return sb->alloc ? sb->alloc - sb->len - 1 : 0;
}
@@ -122,9 +122,9 @@
extern size_t strbuf_fread(struct strbuf *, size_t, FILE *);
/* XXX: if read fails, any partial read is undone */
-extern ssize_t strbuf_read(struct strbuf *, int fd, size_t hint);
-extern int strbuf_read_file(struct strbuf *sb, const char *path, size_t hint);
-extern int strbuf_readlink(struct strbuf *sb, const char *path, size_t hint);
+extern ssize_t strbuf_read(struct strbuf *, int fd, ssize_t hint);
+extern int strbuf_read_file(struct strbuf *sb, const char *path, ssize_t hint);
+extern int strbuf_readlink(struct strbuf *sb, const char *path, ssize_t hint);
extern int strbuf_getline(struct strbuf *, FILE *, int);
diff --git a/tools/perf/util/string.h b/tools/perf/util/string.h
index 37b0325..3dca2f6 100644
--- a/tools/perf/util/string.h
+++ b/tools/perf/util/string.h
@@ -1,7 +1,7 @@
#ifndef _PERF_STRING_H_
#define _PERF_STRING_H_
-#include "../types.h"
+#include "types.h"
int hex2u64(const char *ptr, u64 *val);
diff --git a/tools/perf/util/strlist.c b/tools/perf/util/strlist.c
new file mode 100644
index 0000000..025a78e
--- /dev/null
+++ b/tools/perf/util/strlist.c
@@ -0,0 +1,184 @@
+/*
+ * (c) 2009 Arnaldo Carvalho de Melo <acme@redhat.com>
+ *
+ * Licensed under the GPLv2.
+ */
+
+#include "strlist.h"
+#include <errno.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+
+static struct str_node *str_node__new(const char *s, bool dupstr)
+{
+ struct str_node *self = malloc(sizeof(*self));
+
+ if (self != NULL) {
+ if (dupstr) {
+ s = strdup(s);
+ if (s == NULL)
+ goto out_delete;
+ }
+ self->s = s;
+ }
+
+ return self;
+
+out_delete:
+ free(self);
+ return NULL;
+}
+
+static void str_node__delete(struct str_node *self, bool dupstr)
+{
+ if (dupstr)
+ free((void *)self->s);
+ free(self);
+}
+
+int strlist__add(struct strlist *self, const char *new_entry)
+{
+ struct rb_node **p = &self->entries.rb_node;
+ struct rb_node *parent = NULL;
+ struct str_node *sn;
+
+ while (*p != NULL) {
+ int rc;
+
+ parent = *p;
+ sn = rb_entry(parent, struct str_node, rb_node);
+ rc = strcmp(sn->s, new_entry);
+
+ if (rc > 0)
+ p = &(*p)->rb_left;
+ else if (rc < 0)
+ p = &(*p)->rb_right;
+ else
+ return -EEXIST;
+ }
+
+ sn = str_node__new(new_entry, self->dupstr);
+ if (sn == NULL)
+ return -ENOMEM;
+
+ rb_link_node(&sn->rb_node, parent, p);
+ rb_insert_color(&sn->rb_node, &self->entries);
+
+ return 0;
+}
+
+int strlist__load(struct strlist *self, const char *filename)
+{
+ char entry[1024];
+ int err;
+ FILE *fp = fopen(filename, "r");
+
+ if (fp == NULL)
+ return errno;
+
+ while (fgets(entry, sizeof(entry), fp) != NULL) {
+ const size_t len = strlen(entry);
+
+ if (len == 0)
+ continue;
+ entry[len - 1] = '\0';
+
+ err = strlist__add(self, entry);
+ if (err != 0)
+ goto out;
+ }
+
+ err = 0;
+out:
+ fclose(fp);
+ return err;
+}
+
+void strlist__remove(struct strlist *self, struct str_node *sn)
+{
+ rb_erase(&sn->rb_node, &self->entries);
+ str_node__delete(sn, self->dupstr);
+}
+
+bool strlist__has_entry(struct strlist *self, const char *entry)
+{
+ struct rb_node **p = &self->entries.rb_node;
+ struct rb_node *parent = NULL;
+
+ while (*p != NULL) {
+ struct str_node *sn;
+ int rc;
+
+ parent = *p;
+ sn = rb_entry(parent, struct str_node, rb_node);
+ rc = strcmp(sn->s, entry);
+
+ if (rc > 0)
+ p = &(*p)->rb_left;
+ else if (rc < 0)
+ p = &(*p)->rb_right;
+ else
+ return true;
+ }
+
+ return false;
+}
+
+static int strlist__parse_list_entry(struct strlist *self, const char *s)
+{
+ if (strncmp(s, "file://", 7) == 0)
+ return strlist__load(self, s + 7);
+
+ return strlist__add(self, s);
+}
+
+int strlist__parse_list(struct strlist *self, const char *s)
+{
+ char *sep;
+ int err;
+
+ while ((sep = strchr(s, ',')) != NULL) {
+ *sep = '\0';
+ err = strlist__parse_list_entry(self, s);
+ *sep = ',';
+ if (err != 0)
+ return err;
+ s = sep + 1;
+ }
+
+ return *s ? strlist__parse_list_entry(self, s) : 0;
+}
+
+struct strlist *strlist__new(bool dupstr, const char *slist)
+{
+ struct strlist *self = malloc(sizeof(*self));
+
+ if (self != NULL) {
+ self->entries = RB_ROOT;
+ self->dupstr = dupstr;
+ if (slist && strlist__parse_list(self, slist) != 0)
+ goto out_error;
+ }
+
+ return self;
+out_error:
+ free(self);
+ return NULL;
+}
+
+void strlist__delete(struct strlist *self)
+{
+ if (self != NULL) {
+ struct str_node *pos;
+ struct rb_node *next = rb_first(&self->entries);
+
+ while (next) {
+ pos = rb_entry(next, struct str_node, rb_node);
+ next = rb_next(&pos->rb_node);
+ strlist__remove(self, pos);
+ }
+ self->entries = RB_ROOT;
+ free(self);
+ }
+}
diff --git a/tools/perf/util/strlist.h b/tools/perf/util/strlist.h
new file mode 100644
index 0000000..2fdcfee
--- /dev/null
+++ b/tools/perf/util/strlist.h
@@ -0,0 +1,32 @@
+#ifndef STRLIST_H_
+#define STRLIST_H_
+
+#include <linux/rbtree.h>
+#include <stdbool.h>
+
+struct str_node {
+ struct rb_node rb_node;
+ const char *s;
+};
+
+struct strlist {
+ struct rb_root entries;
+ bool dupstr;
+};
+
+struct strlist *strlist__new(bool dupstr, const char *slist);
+void strlist__delete(struct strlist *self);
+
+void strlist__remove(struct strlist *self, struct str_node *sn);
+int strlist__load(struct strlist *self, const char *filename);
+int strlist__add(struct strlist *self, const char *str);
+
+bool strlist__has_entry(struct strlist *self, const char *entry);
+
+static inline bool strlist__empty(const struct strlist *self)
+{
+ return rb_first(&self->entries) == NULL;
+}
+
+int strlist__parse_list(struct strlist *self, const char *s);
+#endif /* STRLIST_H_ */
diff --git a/tools/perf/util/symbol.c b/tools/perf/util/symbol.c
index 86e1437..4683b67 100644
--- a/tools/perf/util/symbol.c
+++ b/tools/perf/util/symbol.c
@@ -35,7 +35,7 @@
self = ((void *)self) + priv_size;
}
self->start = start;
- self->end = start + len - 1;
+ self->end = len ? start + len - 1 : start;
memcpy(self->name, name, namelen);
return self;
@@ -48,8 +48,12 @@
static size_t symbol__fprintf(struct symbol *self, FILE *fp)
{
- return fprintf(fp, " %llx-%llx %s\n",
+ if (!self->module)
+ return fprintf(fp, " %llx-%llx %s\n",
self->start, self->end, self->name);
+ else
+ return fprintf(fp, " %llx-%llx %s \t[%s]\n",
+ self->start, self->end, self->name, self->module->name);
}
struct dso *dso__new(const char *name, unsigned int sym_priv_size)
@@ -146,6 +150,7 @@
char *line = NULL;
size_t n;
FILE *file = fopen("/proc/kallsyms", "r");
+ int count = 0;
if (file == NULL)
goto out_failure;
@@ -188,8 +193,10 @@
if (filter && filter(self, sym))
symbol__delete(sym, self->sym_priv_size);
- else
+ else {
dso__insert_symbol(self, sym);
+ count++;
+ }
}
/*
@@ -212,7 +219,7 @@
free(line);
fclose(file);
- return 0;
+ return count;
out_delete_line:
free(line);
@@ -307,6 +314,26 @@
sym->st_size != 0;
}
+static inline int elf_sym__is_label(const GElf_Sym *sym)
+{
+ return elf_sym__type(sym) == STT_NOTYPE &&
+ sym->st_name != 0 &&
+ sym->st_shndx != SHN_UNDEF &&
+ sym->st_shndx != SHN_ABS;
+}
+
+static inline const char *elf_sec__name(const GElf_Shdr *shdr,
+ const Elf_Data *secstrs)
+{
+ return secstrs->d_buf + shdr->sh_name;
+}
+
+static inline int elf_sec__is_text(const GElf_Shdr *shdr,
+ const Elf_Data *secstrs)
+{
+ return strstr(elf_sec__name(shdr, secstrs), "text") != NULL;
+}
+
static inline const char *elf_sym__name(const GElf_Sym *sym,
const Elf_Data *symstrs)
{
@@ -448,9 +475,9 @@
}
static int dso__load_sym(struct dso *self, int fd, const char *name,
- symbol_filter_t filter, int verbose)
+ symbol_filter_t filter, int verbose, struct module *mod)
{
- Elf_Data *symstrs;
+ Elf_Data *symstrs, *secstrs;
uint32_t nr_syms;
int err = -1;
uint32_t index;
@@ -458,7 +485,7 @@
GElf_Shdr shdr;
Elf_Data *syms;
GElf_Sym sym;
- Elf_Scn *sec, *sec_dynsym;
+ Elf_Scn *sec, *sec_dynsym, *sec_strndx;
Elf *elf;
size_t dynsym_idx;
int nr = 0;
@@ -517,15 +544,29 @@
if (symstrs == NULL)
goto out_elf_end;
+ sec_strndx = elf_getscn(elf, ehdr.e_shstrndx);
+ if (sec_strndx == NULL)
+ goto out_elf_end;
+
+ secstrs = elf_getdata(sec_strndx, NULL);
+ if (symstrs == NULL)
+ goto out_elf_end;
+
nr_syms = shdr.sh_size / shdr.sh_entsize;
memset(&sym, 0, sizeof(sym));
-
+ self->adjust_symbols = (ehdr.e_type == ET_EXEC ||
+ elf_section_by_name(elf, &ehdr, &shdr,
+ ".gnu.prelink_undo",
+ NULL) != NULL);
elf_symtab__for_each_symbol(syms, nr_syms, index, sym) {
struct symbol *f;
u64 obj_start;
+ struct section *section = NULL;
+ int is_label = elf_sym__is_label(&sym);
+ const char *section_name;
- if (!elf_sym__is_function(&sym))
+ if (!is_label && !elf_sym__is_function(&sym))
continue;
sec = elf_getscn(elf, sym.st_shndx);
@@ -533,9 +574,31 @@
goto out_elf_end;
gelf_getshdr(sec, &shdr);
+
+ if (is_label && !elf_sec__is_text(&shdr, secstrs))
+ continue;
+
+ section_name = elf_sec__name(&shdr, secstrs);
obj_start = sym.st_value;
- sym.st_value -= shdr.sh_addr - shdr.sh_offset;
+ if (self->adjust_symbols) {
+ if (verbose >= 2)
+ printf("adjusting symbol: st_value: %Lx sh_addr: %Lx sh_offset: %Lx\n",
+ (u64)sym.st_value, (u64)shdr.sh_addr, (u64)shdr.sh_offset);
+
+ sym.st_value -= shdr.sh_addr - shdr.sh_offset;
+ }
+
+ if (mod) {
+ section = mod->sections->find_section(mod->sections, section_name);
+ if (section)
+ sym.st_value += section->vma;
+ else {
+ fprintf(stderr, "dso__load_sym() module %s lookup of %s failed\n",
+ mod->name, section_name);
+ goto out_elf_end;
+ }
+ }
f = symbol__new(sym.st_value, sym.st_size,
elf_sym__name(&sym, symstrs),
@@ -546,6 +609,7 @@
if (filter && filter(self, f))
symbol__delete(f, self->sym_priv_size);
else {
+ f->module = mod;
dso__insert_symbol(self, f);
nr++;
}
@@ -569,6 +633,8 @@
if (!name)
return -1;
+ self->adjust_symbols = 0;
+
if (strncmp(self->name, "/tmp/perf-", 10) == 0)
return dso__load_perf_map(self, filter, verbose);
@@ -593,7 +659,7 @@
fd = open(name, O_RDONLY);
} while (fd < 0);
- ret = dso__load_sym(self, fd, name, filter, verbose);
+ ret = dso__load_sym(self, fd, name, filter, verbose, NULL);
close(fd);
/*
@@ -607,6 +673,86 @@
return ret;
}
+static int dso__load_module(struct dso *self, struct mod_dso *mods, const char *name,
+ symbol_filter_t filter, int verbose)
+{
+ struct module *mod = mod_dso__find_module(mods, name);
+ int err = 0, fd;
+
+ if (mod == NULL || !mod->active)
+ return err;
+
+ fd = open(mod->path, O_RDONLY);
+
+ if (fd < 0)
+ return err;
+
+ err = dso__load_sym(self, fd, name, filter, verbose, mod);
+ close(fd);
+
+ return err;
+}
+
+int dso__load_modules(struct dso *self, symbol_filter_t filter, int verbose)
+{
+ struct mod_dso *mods = mod_dso__new_dso("modules");
+ struct module *pos;
+ struct rb_node *next;
+ int err;
+
+ err = mod_dso__load_modules(mods);
+
+ if (err <= 0)
+ return err;
+
+ /*
+ * Iterate over modules, and load active symbols.
+ */
+ next = rb_first(&mods->mods);
+ while (next) {
+ pos = rb_entry(next, struct module, rb_node);
+ err = dso__load_module(self, mods, pos->name, filter, verbose);
+
+ if (err < 0)
+ break;
+
+ next = rb_next(&pos->rb_node);
+ }
+
+ if (err < 0) {
+ mod_dso__delete_modules(mods);
+ mod_dso__delete_self(mods);
+ }
+
+ return err;
+}
+
+static inline void dso__fill_symbol_holes(struct dso *self)
+{
+ struct symbol *prev = NULL;
+ struct rb_node *nd;
+
+ for (nd = rb_last(&self->syms); nd; nd = rb_prev(nd)) {
+ struct symbol *pos = rb_entry(nd, struct symbol, rb_node);
+
+ if (prev) {
+ u64 hole = 0;
+ int alias = pos->start == prev->start;
+
+ if (!alias)
+ hole = prev->start - pos->end - 1;
+
+ if (hole || alias) {
+ if (alias)
+ pos->end = prev->end;
+ else if (hole)
+ pos->end = prev->start - 1;
+ }
+ }
+ prev = pos;
+ }
+}
+
static int dso__load_vmlinux(struct dso *self, const char *vmlinux,
symbol_filter_t filter, int verbose)
{
@@ -615,21 +761,28 @@
if (fd < 0)
return -1;
- err = dso__load_sym(self, fd, vmlinux, filter, verbose);
+ err = dso__load_sym(self, fd, vmlinux, filter, verbose, NULL);
+
+ if (err > 0)
+ dso__fill_symbol_holes(self);
+
close(fd);
return err;
}
int dso__load_kernel(struct dso *self, const char *vmlinux,
- symbol_filter_t filter, int verbose)
+ symbol_filter_t filter, int verbose, int modules)
{
int err = -1;
- if (vmlinux)
+ if (vmlinux) {
err = dso__load_vmlinux(self, vmlinux, filter, verbose);
+ if (err > 0 && modules)
+ err = dso__load_modules(self, filter, verbose);
+ }
- if (err)
+ if (err <= 0)
err = dso__load_kallsyms(self, filter, verbose);
return err;
diff --git a/tools/perf/util/symbol.h b/tools/perf/util/symbol.h
index ea332e5..7918cff 100644
--- a/tools/perf/util/symbol.h
+++ b/tools/perf/util/symbol.h
@@ -2,9 +2,10 @@
#define _PERF_SYMBOL_ 1
#include <linux/types.h>
-#include "../types.h"
-#include "list.h"
-#include "rbtree.h"
+#include "types.h"
+#include <linux/list.h>
+#include <linux/rbtree.h>
+#include "module.h"
struct symbol {
struct rb_node rb_node;
@@ -13,6 +14,7 @@
u64 obj_start;
u64 hist_sum;
u64 *hist;
+ struct module *module;
void *priv;
char name[0];
};
@@ -20,8 +22,9 @@
struct dso {
struct list_head node;
struct rb_root syms;
- unsigned int sym_priv_size;
struct symbol *(*find_symbol)(struct dso *, u64 ip);
+ unsigned int sym_priv_size;
+ unsigned char adjust_symbols;
char name[0];
};
@@ -40,7 +43,8 @@
struct symbol *dso__find_symbol(struct dso *self, u64 ip);
int dso__load_kernel(struct dso *self, const char *vmlinux,
- symbol_filter_t filter, int verbose);
+ symbol_filter_t filter, int verbose, int modules);
+int dso__load_modules(struct dso *self, symbol_filter_t filter, int verbose);
int dso__load(struct dso *self, symbol_filter_t filter, int verbose);
size_t dso__fprintf(struct dso *self, FILE *fp);
diff --git a/tools/perf/types.h b/tools/perf/util/types.h
similarity index 100%
rename from tools/perf/types.h
rename to tools/perf/util/types.h
diff --git a/tools/perf/util/util.h b/tools/perf/util/util.h
index b8cfed7..b4be607 100644
--- a/tools/perf/util/util.h
+++ b/tools/perf/util/util.h
@@ -67,7 +67,6 @@
#include <assert.h>
#include <regex.h>
#include <utime.h>
-#ifndef __MINGW32__
#include <sys/wait.h>
#include <sys/poll.h>
#include <sys/socket.h>
@@ -81,20 +80,6 @@
#include <netdb.h>
#include <pwd.h>
#include <inttypes.h>
-#if defined(__CYGWIN__)
-#undef _XOPEN_SOURCE
-#include <grp.h>
-#define _XOPEN_SOURCE 600
-#include "compat/cygwin.h"
-#else
-#undef _ALL_SOURCE /* AIX 5.3L defines a struct list with _ALL_SOURCE. */
-#include <grp.h>
-#define _ALL_SOURCE 1
-#endif
-#else /* __MINGW32__ */
-/* pull in Windows compatibility stuff */
-#include "compat/mingw.h"
-#endif /* __MINGW32__ */
#ifndef NO_ICONV
#include <iconv.h>
diff --git a/tools/perf/util/wrapper.c b/tools/perf/util/wrapper.c
index 6350d65..4574ac2 100644
--- a/tools/perf/util/wrapper.c
+++ b/tools/perf/util/wrapper.c
@@ -7,7 +7,7 @@
* There's no pack memory to release - but stay close to the Git
* version so wrap this away:
*/
-static inline void release_pack_memory(size_t size, int flag)
+static inline void release_pack_memory(size_t size __used, int flag __used)
{
}
@@ -59,7 +59,8 @@
char *xstrndup(const char *str, size_t len)
{
char *p = memchr(str, '\0', len);
- return xmemdupz(str, p ? p - str : len);
+
+ return xmemdupz(str, p ? (size_t)(p - str) : len);
}
void *xrealloc(void *ptr, size_t size)
diff --git a/virt/kvm/kvm_main.c b/virt/kvm/kvm_main.c
index 7645543..2884baf 100644
--- a/virt/kvm/kvm_main.c
+++ b/virt/kvm/kvm_main.c
@@ -746,6 +746,7 @@
cpumask_clear(cpus);
me = get_cpu();
+ spin_lock(&kvm->requests_lock);
for (i = 0; i < KVM_MAX_VCPUS; ++i) {
vcpu = kvm->vcpus[i];
if (!vcpu)
@@ -762,6 +763,7 @@
smp_call_function_many(cpus, ack_flush, NULL, 1);
else
called = false;
+ spin_unlock(&kvm->requests_lock);
put_cpu();
free_cpumask_var(cpus);
return called;
@@ -982,6 +984,7 @@
kvm->mm = current->mm;
atomic_inc(&kvm->mm->mm_count);
spin_lock_init(&kvm->mmu_lock);
+ spin_lock_init(&kvm->requests_lock);
kvm_io_bus_init(&kvm->pio_bus);
mutex_init(&kvm->lock);
kvm_io_bus_init(&kvm->mmio_bus);
@@ -1194,6 +1197,8 @@
if (!new.dirty_bitmap)
goto out_free;
memset(new.dirty_bitmap, 0, dirty_bytes);
+ if (old.npages)
+ kvm_arch_flush_shadow(kvm);
}
#endif /* not defined CONFIG_S390 */