amd64_edac: fix chip select handling
Different processor families support a different number of chip selects.
Handle this in a family-dependent way with the proper values assigned at
init time (see amd64_set_dct_base_and_mask).
Remove _DCSM_COUNT defines since they're used at one place and originate
from public documentation.
CC: Keith Mannthey <kmannth@us.ibm.com>
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
diff --git a/drivers/edac/amd64_edac.c b/drivers/edac/amd64_edac.c
index ecc86c3..85c308b 100644
--- a/drivers/edac/amd64_edac.c
+++ b/drivers/edac/amd64_edac.c
@@ -189,7 +189,10 @@
/* Map from a CSROW entry to the mask entry that operates on it */
static inline u32 amd64_map_to_dcs_mask(struct amd64_pvt *pvt, int csrow)
{
- return csrow >> (pvt->num_dcsm >> 3);
+ if (boot_cpu_data.x86 == 0xf && pvt->ext_model < OPTERON_CPU_REV_F)
+ return csrow;
+ else
+ return csrow >> 1;
}
/* return the 'base' address the i'th CS entry of the 'dct' DRAM controller */
@@ -374,7 +377,7 @@
* base/mask register pair, test the condition shown near the start of
* section 3.5.4 (p. 84, BKDG #26094, K8, revA-E).
*/
- for (csrow = 0; csrow < CHIPSELECT_COUNT; csrow++) {
+ for (csrow = 0; csrow < pvt->cs_count; csrow++) {
/* This DRAM chip select is disabled on this node */
if ((pvt->dcsb0[csrow] & K8_DCSB_CS_ENABLE) == 0)
@@ -731,7 +734,7 @@
u64 base, mask;
pvt = mci->pvt_info;
- BUG_ON((csrow < 0) || (csrow >= CHIPSELECT_COUNT));
+ BUG_ON((csrow < 0) || (csrow >= pvt->cs_count));
base = base_from_dct_base(pvt, csrow);
mask = mask_from_dct_mask(pvt, csrow);
@@ -959,35 +962,27 @@
*/
static void amd64_set_dct_base_and_mask(struct amd64_pvt *pvt)
{
- if (pvt->ext_model >= OPTERON_CPU_REV_F) {
+
+ if (boot_cpu_data.x86 == 0xf && pvt->ext_model < OPTERON_CPU_REV_F) {
+ pvt->dcsb_base = REV_E_DCSB_BASE_BITS;
+ pvt->dcsm_mask = REV_E_DCSM_MASK_BITS;
+ pvt->dcs_mask_notused = REV_E_DCS_NOTUSED_BITS;
+ pvt->dcs_shift = REV_E_DCS_SHIFT;
+ pvt->cs_count = 8;
+ pvt->num_dcsm = 8;
+ } else {
pvt->dcsb_base = REV_F_F1Xh_DCSB_BASE_BITS;
pvt->dcsm_mask = REV_F_F1Xh_DCSM_MASK_BITS;
pvt->dcs_mask_notused = REV_F_F1Xh_DCS_NOTUSED_BITS;
pvt->dcs_shift = REV_F_F1Xh_DCS_SHIFT;
- switch (boot_cpu_data.x86) {
- case 0xf:
- pvt->num_dcsm = REV_F_DCSM_COUNT;
- break;
-
- case 0x10:
- pvt->num_dcsm = F10_DCSM_COUNT;
- break;
-
- case 0x11:
- pvt->num_dcsm = F11_DCSM_COUNT;
- break;
-
- default:
- amd64_printk(KERN_ERR, "Unsupported family!\n");
- break;
+ if (boot_cpu_data.x86 == 0x11) {
+ pvt->cs_count = 4;
+ pvt->num_dcsm = 2;
+ } else {
+ pvt->cs_count = 8;
+ pvt->num_dcsm = 4;
}
- } else {
- pvt->dcsb_base = REV_E_DCSB_BASE_BITS;
- pvt->dcsm_mask = REV_E_DCSM_MASK_BITS;
- pvt->dcs_mask_notused = REV_E_DCS_NOTUSED_BITS;
- pvt->dcs_shift = REV_E_DCS_SHIFT;
- pvt->num_dcsm = REV_E_DCSM_COUNT;
}
}
@@ -1000,7 +995,7 @@
amd64_set_dct_base_and_mask(pvt);
- for (cs = 0; cs < CHIPSELECT_COUNT; cs++) {
+ for (cs = 0; cs < pvt->cs_count; cs++) {
reg = K8_DCSB0 + (cs * 4);
err = pci_read_config_dword(pvt->dram_f2_ctl, reg,
&pvt->dcsb0[cs]);
@@ -1563,7 +1558,7 @@
debugf1("InputAddr=0x%x channelselect=%d\n", in_addr, cs);
- for (csrow = 0; csrow < CHIPSELECT_COUNT; csrow++) {
+ for (csrow = 0; csrow < pvt->cs_count; csrow++) {
cs_base = amd64_get_dct_base(pvt, cs, csrow);
if (!(cs_base & K8_DCSB_CS_ENABLE))
@@ -2494,7 +2489,7 @@
* NOTE: CPU Revision Dependent code
*
* Input:
- * @csrow_nr ChipSelect Row Number (0..CHIPSELECT_COUNT-1)
+ * @csrow_nr ChipSelect Row Number (0..pvt->cs_count-1)
* k8 private pointer to -->
* DRAM Bank Address mapping register
* node_id
@@ -2574,7 +2569,7 @@
(pvt->nbcfg & K8_NBCFG_ECC_ENABLE) ? "Enabled" : "Disabled"
);
- for (i = 0; i < CHIPSELECT_COUNT; i++) {
+ for (i = 0; i < pvt->cs_count; i++) {
csrow = &mci->csrows[i];
if ((pvt->dcsb0[i] & K8_DCSB_CS_ENABLE) == 0) {
@@ -2985,7 +2980,7 @@
goto err_exit;
ret = -ENOMEM;
- mci = edac_mc_alloc(0, CHIPSELECT_COUNT, pvt->channel_count, node_id);
+ mci = edac_mc_alloc(0, pvt->cs_count, pvt->channel_count, node_id);
if (!mci)
goto err_exit;