arch/x86/include/asm/irq_vectors.h - kernel/msm-4.9 - Gitiles

 #ifndef _ASM_X86_IRQ_VECTORS_H
 #define _ASM_X86_IRQ_VECTORS_H

 /*
  * Linux IRQ vector layout.
  *
  * There are 256 IDT entries (per CPU - each entry is 8 bytes) which can
  * be defined by Linux. They are used as a jump table by the CPU when a
  * given vector is triggered - by a CPU-external, CPU-internal or
  * software-triggered event.
  *
  * Linux sets the kernel code address each entry jumps to early during
  * bootup, and never changes them. This is the general layout of the
  * IDT entries:
  *
  *  Vectors   0 ...  31 : system traps and exceptions - hardcoded events
  *  Vectors  32 ... 127 : device interrupts
  *  Vector  128         : legacy int80 syscall interface
  *  Vectors 129 ... 237 : device interrupts
  *  Vectors 238 ... 255 : special interrupts
  *
  * 64-bit x86 has per CPU IDT tables, 32-bit has one shared IDT table.
  *
  * This file enumerates the exact layout of them:
  */

 #define NMI_VECTOR			0x02
 #define MCE_VECTOR			0x12

 /*
  * IDT vectors usable for external interrupt sources start
  * at 0x20:
  */
 #define FIRST_EXTERNAL_VECTOR		0x20

 #ifdef CONFIG_X86_32
 # define SYSCALL_VECTOR			0x80
 # define IA32_SYSCALL_VECTOR		0x80
 #else
 # define IA32_SYSCALL_VECTOR		0x80
 #endif

 /*
  * Reserve the lowest usable priority level 0x20 - 0x2f for triggering
  * cleanup after irq migration.
  */
 #define IRQ_MOVE_CLEANUP_VECTOR		FIRST_EXTERNAL_VECTOR

 /*
  * Vectors 0x30-0x3f are used for ISA interrupts.
  */
 #define IRQ0_VECTOR			(FIRST_EXTERNAL_VECTOR + 0x10)

 #define IRQ1_VECTOR			(IRQ0_VECTOR +  1)
 #define IRQ2_VECTOR			(IRQ0_VECTOR +  2)
 #define IRQ3_VECTOR			(IRQ0_VECTOR +  3)
 #define IRQ4_VECTOR			(IRQ0_VECTOR +  4)
 #define IRQ5_VECTOR			(IRQ0_VECTOR +  5)
 #define IRQ6_VECTOR			(IRQ0_VECTOR +  6)
 #define IRQ7_VECTOR			(IRQ0_VECTOR +  7)
 #define IRQ8_VECTOR			(IRQ0_VECTOR +  8)
 #define IRQ9_VECTOR			(IRQ0_VECTOR +  9)
 #define IRQ10_VECTOR			(IRQ0_VECTOR + 10)
 #define IRQ11_VECTOR			(IRQ0_VECTOR + 11)
 #define IRQ12_VECTOR			(IRQ0_VECTOR + 12)
 #define IRQ13_VECTOR			(IRQ0_VECTOR + 13)
 #define IRQ14_VECTOR			(IRQ0_VECTOR + 14)
 #define IRQ15_VECTOR			(IRQ0_VECTOR + 15)

 /*
  * Special IRQ vectors used by the SMP architecture, 0xf0-0xff
  *
  *  some of the following vectors are 'rare', they are merged
  *  into a single vector (CALL_FUNCTION_VECTOR) to save vector space.
  *  TLB, reschedule and local APIC vectors are performance-critical.
  */

 #define SPURIOUS_APIC_VECTOR		0xff
 /*
  * Sanity check
  */
 #if ((SPURIOUS_APIC_VECTOR & 0x0F) != 0x0F)
 # error SPURIOUS_APIC_VECTOR definition error
 #endif

 #define ERROR_APIC_VECTOR		0xfe
 #define RESCHEDULE_VECTOR		0xfd
 #define CALL_FUNCTION_VECTOR		0xfc
 #define CALL_FUNCTION_SINGLE_VECTOR	0xfb
 #define THERMAL_APIC_VECTOR		0xfa
 #define THRESHOLD_APIC_VECTOR		0xf9
 #define REBOOT_VECTOR			0xf8

 /* f0-f7 used for spreading out TLB flushes: */
 #define INVALIDATE_TLB_VECTOR_END	0xf7
 #define INVALIDATE_TLB_VECTOR_START	0xf0
 #define NUM_INVALIDATE_TLB_VECTORS	   8

 /*
  * Local APIC timer IRQ vector is on a different priority level,
  * to work around the 'lost local interrupt if more than 2 IRQ
  * sources per level' errata.
  */
 #define LOCAL_TIMER_VECTOR		0xef

 /*
  * Generic system vector for platform specific use
  */
 #define X86_PLATFORM_IPI_VECTOR		0xed

 /*
  * Performance monitoring pending work vector:
  */
 #define LOCAL_PENDING_VECTOR		0xec

 #define UV_BAU_MESSAGE			0xec

 /*
  * Self IPI vector for machine checks
  */
 #define MCE_SELF_VECTOR			0xeb

 /*
  * First APIC vector available to drivers: (vectors 0x30-0xee) we
  * start at 0x31(0x41) to spread out vectors evenly between priority
  * levels. (0x80 is the syscall vector)
  */
 #define FIRST_DEVICE_VECTOR		(IRQ15_VECTOR + 2)

 #define NR_VECTORS			 256

 #define FPU_IRQ				  13

 #define	FIRST_VM86_IRQ			   3
 #define LAST_VM86_IRQ			  15

 #ifndef __ASSEMBLY__
 static inline int invalid_vm86_irq(int irq)
 {
 	return irq < FIRST_VM86_IRQ || irq > LAST_VM86_IRQ;
 }
 #endif

 /*
  * Size the maximum number of interrupts.
  *
  * If the irq_desc[] array has a sparse layout, we can size things
  * generously - it scales up linearly with the maximum number of CPUs,
  * and the maximum number of IO-APICs, whichever is higher.
  *
  * In other cases we size more conservatively, to not create too large
  * static arrays.
  */

 #define NR_IRQS_LEGACY			  16

 #define CPU_VECTOR_LIMIT		(  8 * NR_CPUS      )
 #define IO_APIC_VECTOR_LIMIT		( 32 * MAX_IO_APICS )

 #ifdef CONFIG_X86_IO_APIC
 # ifdef CONFIG_SPARSE_IRQ
 #  define NR_IRQS					\
 	(CPU_VECTOR_LIMIT > IO_APIC_VECTOR_LIMIT ?	\
 		(NR_VECTORS + CPU_VECTOR_LIMIT)  :	\
 		(NR_VECTORS + IO_APIC_VECTOR_LIMIT))
 # else
 #  if NR_CPUS < MAX_IO_APICS
 #   define NR_IRQS 			(NR_VECTORS + 4*CPU_VECTOR_LIMIT)
 #  else
 #   define NR_IRQS			(NR_VECTORS + IO_APIC_VECTOR_LIMIT)
 #  endif
 # endif
 #else /* !CONFIG_X86_IO_APIC: */
 # define NR_IRQS			NR_IRQS_LEGACY
 #endif

 #endif /* _ASM_X86_IRQ_VECTORS_H */
	#ifndef _ASM_X86_IRQ_VECTORS_H
	#define _ASM_X86_IRQ_VECTORS_H

	/*
	* Linux IRQ vector layout.
	*
	* There are 256 IDT entries (per CPU - each entry is 8 bytes) which can
	* be defined by Linux. They are used as a jump table by the CPU when a
	* given vector is triggered - by a CPU-external, CPU-internal or
	* software-triggered event.
	*
	* Linux sets the kernel code address each entry jumps to early during
	* bootup, and never changes them. This is the general layout of the
	* IDT entries:
	*
	* Vectors 0 ... 31 : system traps and exceptions - hardcoded events
	* Vectors 32 ... 127 : device interrupts
	* Vector 128 : legacy int80 syscall interface
	* Vectors 129 ... 237 : device interrupts
	* Vectors 238 ... 255 : special interrupts
	*
	* 64-bit x86 has per CPU IDT tables, 32-bit has one shared IDT table.
	*
	* This file enumerates the exact layout of them:
	*/

	#define NMI_VECTOR 0x02
	#define MCE_VECTOR 0x12

	/*
	* IDT vectors usable for external interrupt sources start
	* at 0x20:
	*/
	#define FIRST_EXTERNAL_VECTOR 0x20

	#ifdef CONFIG_X86_32
	# define SYSCALL_VECTOR 0x80
	# define IA32_SYSCALL_VECTOR 0x80
	#else
	# define IA32_SYSCALL_VECTOR 0x80
	#endif

	/*
	* Reserve the lowest usable priority level 0x20 - 0x2f for triggering
	* cleanup after irq migration.
	*/
	#define IRQ_MOVE_CLEANUP_VECTOR FIRST_EXTERNAL_VECTOR

	/*
	* Vectors 0x30-0x3f are used for ISA interrupts.
	*/
	#define IRQ0_VECTOR (FIRST_EXTERNAL_VECTOR + 0x10)

	#define IRQ1_VECTOR (IRQ0_VECTOR + 1)
	#define IRQ2_VECTOR (IRQ0_VECTOR + 2)
	#define IRQ3_VECTOR (IRQ0_VECTOR + 3)
	#define IRQ4_VECTOR (IRQ0_VECTOR + 4)
	#define IRQ5_VECTOR (IRQ0_VECTOR + 5)
	#define IRQ6_VECTOR (IRQ0_VECTOR + 6)
	#define IRQ7_VECTOR (IRQ0_VECTOR + 7)
	#define IRQ8_VECTOR (IRQ0_VECTOR + 8)
	#define IRQ9_VECTOR (IRQ0_VECTOR + 9)
	#define IRQ10_VECTOR (IRQ0_VECTOR + 10)
	#define IRQ11_VECTOR (IRQ0_VECTOR + 11)
	#define IRQ12_VECTOR (IRQ0_VECTOR + 12)
	#define IRQ13_VECTOR (IRQ0_VECTOR + 13)
	#define IRQ14_VECTOR (IRQ0_VECTOR + 14)
	#define IRQ15_VECTOR (IRQ0_VECTOR + 15)

	/*
	* Special IRQ vectors used by the SMP architecture, 0xf0-0xff
	*
	* some of the following vectors are 'rare', they are merged
	* into a single vector (CALL_FUNCTION_VECTOR) to save vector space.
	* TLB, reschedule and local APIC vectors are performance-critical.
	*/

	#define SPURIOUS_APIC_VECTOR 0xff
	/*
	* Sanity check
	*/
	#if ((SPURIOUS_APIC_VECTOR & 0x0F) != 0x0F)
	# error SPURIOUS_APIC_VECTOR definition error
	#endif

	#define ERROR_APIC_VECTOR 0xfe
	#define RESCHEDULE_VECTOR 0xfd
	#define CALL_FUNCTION_VECTOR 0xfc
	#define CALL_FUNCTION_SINGLE_VECTOR 0xfb
	#define THERMAL_APIC_VECTOR 0xfa
	#define THRESHOLD_APIC_VECTOR 0xf9
	#define REBOOT_VECTOR 0xf8

	/* f0-f7 used for spreading out TLB flushes: */
	#define INVALIDATE_TLB_VECTOR_END 0xf7
	#define INVALIDATE_TLB_VECTOR_START 0xf0
	#define NUM_INVALIDATE_TLB_VECTORS 8

	/*
	* Local APIC timer IRQ vector is on a different priority level,
	* to work around the 'lost local interrupt if more than 2 IRQ
	* sources per level' errata.
	*/
	#define LOCAL_TIMER_VECTOR 0xef

	/*
	* Generic system vector for platform specific use
	*/
	#define X86_PLATFORM_IPI_VECTOR 0xed

	/*
	* Performance monitoring pending work vector:
	*/
	#define LOCAL_PENDING_VECTOR 0xec

	#define UV_BAU_MESSAGE 0xec

	/*
	* Self IPI vector for machine checks
	*/
	#define MCE_SELF_VECTOR 0xeb

	/*
	* First APIC vector available to drivers: (vectors 0x30-0xee) we
	* start at 0x31(0x41) to spread out vectors evenly between priority
	* levels. (0x80 is the syscall vector)
	*/
	#define FIRST_DEVICE_VECTOR (IRQ15_VECTOR + 2)

	#define NR_VECTORS 256

	#define FPU_IRQ 13

	#define FIRST_VM86_IRQ 3
	#define LAST_VM86_IRQ 15

	#ifndef __ASSEMBLY__
	static inline int invalid_vm86_irq(int irq)
	{
	return irq < FIRST_VM86_IRQ \|\| irq > LAST_VM86_IRQ;
	}
	#endif

	/*
	* Size the maximum number of interrupts.
	*
	* If the irq_desc[] array has a sparse layout, we can size things
	* generously - it scales up linearly with the maximum number of CPUs,
	* and the maximum number of IO-APICs, whichever is higher.
	*
	* In other cases we size more conservatively, to not create too large
	* static arrays.
	*/

	#define NR_IRQS_LEGACY 16

	#define CPU_VECTOR_LIMIT ( 8 * NR_CPUS )
	#define IO_APIC_VECTOR_LIMIT ( 32 * MAX_IO_APICS )

	#ifdef CONFIG_X86_IO_APIC
	# ifdef CONFIG_SPARSE_IRQ
	# define NR_IRQS \
	(CPU_VECTOR_LIMIT > IO_APIC_VECTOR_LIMIT ? \
	(NR_VECTORS + CPU_VECTOR_LIMIT) : \
	(NR_VECTORS + IO_APIC_VECTOR_LIMIT))
	# else
	# if NR_CPUS < MAX_IO_APICS
	# define NR_IRQS (NR_VECTORS + 4*CPU_VECTOR_LIMIT)
	# else
	# define NR_IRQS (NR_VECTORS + IO_APIC_VECTOR_LIMIT)
	# endif
	# endif
	#else /* !CONFIG_X86_IO_APIC: */
	# define NR_IRQS NR_IRQS_LEGACY
	#endif

	#endif /* _ASM_X86_IRQ_VECTORS_H */