blob: 0bc807c33a568b712cbb1ea27b4c37ca65ec772c [file] [log] [blame]
/******************************************************************************
*
* Module Name: evregion - ACPI address_space (op_region) handler dispatch
*
*****************************************************************************/
/*
* Copyright (C) 2000 - 2008, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions, and the following disclaimer,
* without modification.
* 2. Redistributions in binary form must reproduce at minimum a disclaimer
* substantially similar to the "NO WARRANTY" disclaimer below
* ("Disclaimer") and any redistribution must be conditioned upon
* including a substantially similar Disclaimer requirement for further
* binary redistribution.
* 3. Neither the names of the above-listed copyright holders nor the names
* of any contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* Alternatively, this software may be distributed under the terms of the
* GNU General Public License ("GPL") version 2 as published by the Free
* Software Foundation.
*
* NO WARRANTY
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
* IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGES.
*/
#include <acpi/acpi.h>
#include "accommon.h"
#include "acevents.h"
#include "acnamesp.h"
#include "acinterp.h"
#define _COMPONENT ACPI_EVENTS
ACPI_MODULE_NAME("evregion")
/* Local prototypes */
static u8
acpi_ev_has_default_handler(struct acpi_namespace_node *node,
acpi_adr_space_type space_id);
static acpi_status
acpi_ev_reg_run(acpi_handle obj_handle,
u32 level, void *context, void **return_value);
static acpi_status
acpi_ev_install_handler(acpi_handle obj_handle,
u32 level, void *context, void **return_value);
/* These are the address spaces that will get default handlers */
#define ACPI_NUM_DEFAULT_SPACES 4
static u8 acpi_gbl_default_address_spaces[ACPI_NUM_DEFAULT_SPACES] = {
ACPI_ADR_SPACE_SYSTEM_MEMORY,
ACPI_ADR_SPACE_SYSTEM_IO,
ACPI_ADR_SPACE_PCI_CONFIG,
ACPI_ADR_SPACE_DATA_TABLE
};
/*******************************************************************************
*
* FUNCTION: acpi_ev_install_region_handlers
*
* PARAMETERS: None
*
* RETURN: Status
*
* DESCRIPTION: Installs the core subsystem default address space handlers.
*
******************************************************************************/
acpi_status acpi_ev_install_region_handlers(void)
{
acpi_status status;
u32 i;
ACPI_FUNCTION_TRACE(ev_install_region_handlers);
status = acpi_ut_acquire_mutex(ACPI_MTX_NAMESPACE);
if (ACPI_FAILURE(status)) {
return_ACPI_STATUS(status);
}
/*
* All address spaces (PCI Config, EC, SMBus) are scope dependent and
* registration must occur for a specific device.
*
* In the case of the system memory and IO address spaces there is
* currently no device associated with the address space. For these we
* use the root.
*
* We install the default PCI config space handler at the root so that
* this space is immediately available even though the we have not
* enumerated all the PCI Root Buses yet. This is to conform to the ACPI
* specification which states that the PCI config space must be always
* available -- even though we are nowhere near ready to find the PCI root
* buses at this point.
*
* NOTE: We ignore AE_ALREADY_EXISTS because this means that a handler
* has already been installed (via acpi_install_address_space_handler).
* Similar for AE_SAME_HANDLER.
*/
for (i = 0; i < ACPI_NUM_DEFAULT_SPACES; i++) {
status = acpi_ev_install_space_handler(acpi_gbl_root_node,
acpi_gbl_default_address_spaces
[i],
ACPI_DEFAULT_HANDLER,
NULL, NULL);
switch (status) {
case AE_OK:
case AE_SAME_HANDLER:
case AE_ALREADY_EXISTS:
/* These exceptions are all OK */
status = AE_OK;
break;
default:
goto unlock_and_exit;
}
}
unlock_and_exit:
(void)acpi_ut_release_mutex(ACPI_MTX_NAMESPACE);
return_ACPI_STATUS(status);
}
/*******************************************************************************
*
* FUNCTION: acpi_ev_has_default_handler
*
* PARAMETERS: Node - Namespace node for the device
* space_id - The address space ID
*
* RETURN: TRUE if default handler is installed, FALSE otherwise
*
* DESCRIPTION: Check if the default handler is installed for the requested
* space ID.
*
******************************************************************************/
static u8
acpi_ev_has_default_handler(struct acpi_namespace_node *node,
acpi_adr_space_type space_id)
{
union acpi_operand_object *obj_desc;
union acpi_operand_object *handler_obj;
/* Must have an existing internal object */
obj_desc = acpi_ns_get_attached_object(node);
if (obj_desc) {
handler_obj = obj_desc->device.handler;
/* Walk the linked list of handlers for this object */
while (handler_obj) {
if (handler_obj->address_space.space_id == space_id) {
if (handler_obj->address_space.handler_flags &
ACPI_ADDR_HANDLER_DEFAULT_INSTALLED) {
return (TRUE);
}
}
handler_obj = handler_obj->address_space.next;
}
}
return (FALSE);
}
/*******************************************************************************
*
* FUNCTION: acpi_ev_initialize_op_regions
*
* PARAMETERS: None
*
* RETURN: Status
*
* DESCRIPTION: Execute _REG methods for all Operation Regions that have
* an installed default region handler.
*
******************************************************************************/
acpi_status acpi_ev_initialize_op_regions(void)
{
acpi_status status;
u32 i;
ACPI_FUNCTION_TRACE(ev_initialize_op_regions);
status = acpi_ut_acquire_mutex(ACPI_MTX_NAMESPACE);
if (ACPI_FAILURE(status)) {
return_ACPI_STATUS(status);
}
/* Run the _REG methods for op_regions in each default address space */
for (i = 0; i < ACPI_NUM_DEFAULT_SPACES; i++) {
/*
* Make sure the installed handler is the DEFAULT handler. If not the
* default, the _REG methods will have already been run (when the
* handler was installed)
*/
if (acpi_ev_has_default_handler(acpi_gbl_root_node,
acpi_gbl_default_address_spaces
[i])) {
status =
acpi_ev_execute_reg_methods(acpi_gbl_root_node,
acpi_gbl_default_address_spaces
[i]);
}
}
(void)acpi_ut_release_mutex(ACPI_MTX_NAMESPACE);
return_ACPI_STATUS(status);
}
/*******************************************************************************
*
* FUNCTION: acpi_ev_execute_reg_method
*
* PARAMETERS: region_obj - Region object
* Function - Passed to _REG: On (1) or Off (0)
*
* RETURN: Status
*
* DESCRIPTION: Execute _REG method for a region
*
******************************************************************************/
acpi_status
acpi_ev_execute_reg_method(union acpi_operand_object *region_obj, u32 function)
{
struct acpi_evaluate_info *info;
union acpi_operand_object *args[3];
union acpi_operand_object *region_obj2;
acpi_status status;
ACPI_FUNCTION_TRACE(ev_execute_reg_method);
region_obj2 = acpi_ns_get_secondary_object(region_obj);
if (!region_obj2) {
return_ACPI_STATUS(AE_NOT_EXIST);
}
if (region_obj2->extra.method_REG == NULL) {
return_ACPI_STATUS(AE_OK);
}
/* Allocate and initialize the evaluation information block */
info = ACPI_ALLOCATE_ZEROED(sizeof(struct acpi_evaluate_info));
if (!info) {
return_ACPI_STATUS(AE_NO_MEMORY);
}
info->prefix_node = region_obj2->extra.method_REG;
info->pathname = NULL;
info->parameters = args;
info->flags = ACPI_IGNORE_RETURN_VALUE;
/*
* The _REG method has two arguments:
*
* Arg0 - Integer:
* Operation region space ID Same value as region_obj->Region.space_id
*
* Arg1 - Integer:
* connection status 1 for connecting the handler, 0 for disconnecting
* the handler (Passed as a parameter)
*/
args[0] =
acpi_ut_create_integer_object((u64) region_obj->region.space_id);
if (!args[0]) {
status = AE_NO_MEMORY;
goto cleanup1;
}
args[1] = acpi_ut_create_integer_object((u64) function);
if (!args[1]) {
status = AE_NO_MEMORY;
goto cleanup2;
}
args[2] = NULL; /* Terminate list */
/* Execute the method, no return value */
ACPI_DEBUG_EXEC(acpi_ut_display_init_pathname
(ACPI_TYPE_METHOD, info->prefix_node, NULL));
status = acpi_ns_evaluate(info);
acpi_ut_remove_reference(args[1]);
cleanup2:
acpi_ut_remove_reference(args[0]);
cleanup1:
ACPI_FREE(info);
return_ACPI_STATUS(status);
}
/*******************************************************************************
*
* FUNCTION: acpi_ev_address_space_dispatch
*
* PARAMETERS: region_obj - Internal region object
* Function - Read or Write operation
* region_offset - Where in the region to read or write
* bit_width - Field width in bits (8, 16, 32, or 64)
* Value - Pointer to in or out value, must be
* full 64-bit acpi_integer
*
* RETURN: Status
*
* DESCRIPTION: Dispatch an address space or operation region access to
* a previously installed handler.
*
******************************************************************************/
acpi_status
acpi_ev_address_space_dispatch(union acpi_operand_object *region_obj,
u32 function,
u32 region_offset,
u32 bit_width, acpi_integer * value)
{
acpi_status status;
acpi_adr_space_handler handler;
acpi_adr_space_setup region_setup;
union acpi_operand_object *handler_desc;
union acpi_operand_object *region_obj2;
void *region_context = NULL;
ACPI_FUNCTION_TRACE(ev_address_space_dispatch);
region_obj2 = acpi_ns_get_secondary_object(region_obj);
if (!region_obj2) {
return_ACPI_STATUS(AE_NOT_EXIST);
}
/* Ensure that there is a handler associated with this region */
handler_desc = region_obj->region.handler;
if (!handler_desc) {
ACPI_ERROR((AE_INFO,
"No handler for Region [%4.4s] (%p) [%s]",
acpi_ut_get_node_name(region_obj->region.node),
region_obj,
acpi_ut_get_region_name(region_obj->region.
space_id)));
return_ACPI_STATUS(AE_NOT_EXIST);
}
/*
* It may be the case that the region has never been initialized.
* Some types of regions require special init code
*/
if (!(region_obj->region.flags & AOPOBJ_SETUP_COMPLETE)) {
/* This region has not been initialized yet, do it */
region_setup = handler_desc->address_space.setup;
if (!region_setup) {
/* No initialization routine, exit with error */
ACPI_ERROR((AE_INFO,
"No init routine for region(%p) [%s]",
region_obj,
acpi_ut_get_region_name(region_obj->region.
space_id)));
return_ACPI_STATUS(AE_NOT_EXIST);
}
/*
* We must exit the interpreter because the region setup will
* potentially execute control methods (for example, the _REG method
* for this region)
*/
acpi_ex_exit_interpreter();
status = region_setup(region_obj, ACPI_REGION_ACTIVATE,
handler_desc->address_space.context,
&region_context);
/* Re-enter the interpreter */
acpi_ex_enter_interpreter();
/* Check for failure of the Region Setup */
if (ACPI_FAILURE(status)) {
ACPI_EXCEPTION((AE_INFO, status,
"During region initialization: [%s]",
acpi_ut_get_region_name(region_obj->
region.
space_id)));
return_ACPI_STATUS(status);
}
/* Region initialization may have been completed by region_setup */
if (!(region_obj->region.flags & AOPOBJ_SETUP_COMPLETE)) {
region_obj->region.flags |= AOPOBJ_SETUP_COMPLETE;
if (region_obj2->extra.region_context) {
/* The handler for this region was already installed */
ACPI_FREE(region_context);
} else {
/*
* Save the returned context for use in all accesses to
* this particular region
*/
region_obj2->extra.region_context =
region_context;
}
}
}
/* We have everything we need, we can invoke the address space handler */
handler = handler_desc->address_space.handler;
ACPI_DEBUG_PRINT((ACPI_DB_OPREGION,
"Handler %p (@%p) Address %8.8X%8.8X [%s]\n",
&region_obj->region.handler->address_space, handler,
ACPI_FORMAT_NATIVE_UINT(region_obj->region.address +
region_offset),
acpi_ut_get_region_name(region_obj->region.
space_id)));
if (!(handler_desc->address_space.handler_flags &
ACPI_ADDR_HANDLER_DEFAULT_INSTALLED)) {
/*
* For handlers other than the default (supplied) handlers, we must
* exit the interpreter because the handler *might* block -- we don't
* know what it will do, so we can't hold the lock on the intepreter.
*/
acpi_ex_exit_interpreter();
}
/* Call the handler */
status = handler(function,
(region_obj->region.address + region_offset),
bit_width, value, handler_desc->address_space.context,
region_obj2->extra.region_context);
if (ACPI_FAILURE(status)) {
ACPI_EXCEPTION((AE_INFO, status, "Returned by Handler for [%s]",
acpi_ut_get_region_name(region_obj->region.
space_id)));
}
if (!(handler_desc->address_space.handler_flags &
ACPI_ADDR_HANDLER_DEFAULT_INSTALLED)) {
/*
* We just returned from a non-default handler, we must re-enter the
* interpreter
*/
acpi_ex_enter_interpreter();
}
return_ACPI_STATUS(status);
}
/*******************************************************************************
*
* FUNCTION: acpi_ev_detach_region
*
* PARAMETERS: region_obj - Region Object
* acpi_ns_is_locked - Namespace Region Already Locked?
*
* RETURN: None
*
* DESCRIPTION: Break the association between the handler and the region
* this is a two way association.
*
******************************************************************************/
void
acpi_ev_detach_region(union acpi_operand_object *region_obj,
u8 acpi_ns_is_locked)
{
union acpi_operand_object *handler_obj;
union acpi_operand_object *obj_desc;
union acpi_operand_object **last_obj_ptr;
acpi_adr_space_setup region_setup;
void **region_context;
union acpi_operand_object *region_obj2;
acpi_status status;
ACPI_FUNCTION_TRACE(ev_detach_region);
region_obj2 = acpi_ns_get_secondary_object(region_obj);
if (!region_obj2) {
return_VOID;
}
region_context = &region_obj2->extra.region_context;
/* Get the address handler from the region object */
handler_obj = region_obj->region.handler;
if (!handler_obj) {
/* This region has no handler, all done */
return_VOID;
}
/* Find this region in the handler's list */
obj_desc = handler_obj->address_space.region_list;
last_obj_ptr = &handler_obj->address_space.region_list;
while (obj_desc) {
/* Is this the correct Region? */
if (obj_desc == region_obj) {
ACPI_DEBUG_PRINT((ACPI_DB_OPREGION,
"Removing Region %p from address handler %p\n",
region_obj, handler_obj));
/* This is it, remove it from the handler's list */
*last_obj_ptr = obj_desc->region.next;
obj_desc->region.next = NULL; /* Must clear field */
if (acpi_ns_is_locked) {
status =
acpi_ut_release_mutex(ACPI_MTX_NAMESPACE);
if (ACPI_FAILURE(status)) {
return_VOID;
}
}
/* Now stop region accesses by executing the _REG method */
status = acpi_ev_execute_reg_method(region_obj, 0);
if (ACPI_FAILURE(status)) {
ACPI_EXCEPTION((AE_INFO, status,
"from region _REG, [%s]",
acpi_ut_get_region_name
(region_obj->region.space_id)));
}
if (acpi_ns_is_locked) {
status =
acpi_ut_acquire_mutex(ACPI_MTX_NAMESPACE);
if (ACPI_FAILURE(status)) {
return_VOID;
}
}
/*
* If the region has been activated, call the setup handler with
* the deactivate notification
*/
if (region_obj->region.flags & AOPOBJ_SETUP_COMPLETE) {
region_setup = handler_obj->address_space.setup;
status =
region_setup(region_obj,
ACPI_REGION_DEACTIVATE,
handler_obj->address_space.
context, region_context);
/* Init routine may fail, Just ignore errors */
if (ACPI_FAILURE(status)) {
ACPI_EXCEPTION((AE_INFO, status,
"from region handler - deactivate, [%s]",
acpi_ut_get_region_name
(region_obj->region.
space_id)));
}
region_obj->region.flags &=
~(AOPOBJ_SETUP_COMPLETE);
}
/*
* Remove handler reference in the region
*
* NOTE: this doesn't mean that the region goes away, the region
* is just inaccessible as indicated to the _REG method
*
* If the region is on the handler's list, this must be the
* region's handler
*/
region_obj->region.handler = NULL;
acpi_ut_remove_reference(handler_obj);
return_VOID;
}
/* Walk the linked list of handlers */
last_obj_ptr = &obj_desc->region.next;
obj_desc = obj_desc->region.next;
}
/* If we get here, the region was not in the handler's region list */
ACPI_DEBUG_PRINT((ACPI_DB_OPREGION,
"Cannot remove region %p from address handler %p\n",
region_obj, handler_obj));
return_VOID;
}
/*******************************************************************************
*
* FUNCTION: acpi_ev_attach_region
*
* PARAMETERS: handler_obj - Handler Object
* region_obj - Region Object
* acpi_ns_is_locked - Namespace Region Already Locked?
*
* RETURN: None
*
* DESCRIPTION: Create the association between the handler and the region
* this is a two way association.
*
******************************************************************************/
acpi_status
acpi_ev_attach_region(union acpi_operand_object *handler_obj,
union acpi_operand_object *region_obj,
u8 acpi_ns_is_locked)
{
ACPI_FUNCTION_TRACE(ev_attach_region);
ACPI_DEBUG_PRINT((ACPI_DB_OPREGION,
"Adding Region [%4.4s] %p to address handler %p [%s]\n",
acpi_ut_get_node_name(region_obj->region.node),
region_obj, handler_obj,
acpi_ut_get_region_name(region_obj->region.
space_id)));
/* Link this region to the front of the handler's list */
region_obj->region.next = handler_obj->address_space.region_list;
handler_obj->address_space.region_list = region_obj;
/* Install the region's handler */
if (region_obj->region.handler) {
return_ACPI_STATUS(AE_ALREADY_EXISTS);
}
region_obj->region.handler = handler_obj;
acpi_ut_add_reference(handler_obj);
return_ACPI_STATUS(AE_OK);
}
/*******************************************************************************
*
* FUNCTION: acpi_ev_install_handler
*
* PARAMETERS: walk_namespace callback
*
* DESCRIPTION: This routine installs an address handler into objects that are
* of type Region or Device.
*
* If the Object is a Device, and the device has a handler of
* the same type then the search is terminated in that branch.
*
* This is because the existing handler is closer in proximity
* to any more regions than the one we are trying to install.
*
******************************************************************************/
static acpi_status
acpi_ev_install_handler(acpi_handle obj_handle,
u32 level, void *context, void **return_value)
{
union acpi_operand_object *handler_obj;
union acpi_operand_object *next_handler_obj;
union acpi_operand_object *obj_desc;
struct acpi_namespace_node *node;
acpi_status status;
ACPI_FUNCTION_NAME(ev_install_handler);
handler_obj = (union acpi_operand_object *)context;
/* Parameter validation */
if (!handler_obj) {
return (AE_OK);
}
/* Convert and validate the device handle */
node = acpi_ns_map_handle_to_node(obj_handle);
if (!node) {
return (AE_BAD_PARAMETER);
}
/*
* We only care about regions and objects that are allowed to have
* address space handlers
*/
if ((node->type != ACPI_TYPE_DEVICE) &&
(node->type != ACPI_TYPE_REGION) && (node != acpi_gbl_root_node)) {
return (AE_OK);
}
/* Check for an existing internal object */
obj_desc = acpi_ns_get_attached_object(node);
if (!obj_desc) {
/* No object, just exit */
return (AE_OK);
}
/* Devices are handled different than regions */
if (obj_desc->common.type == ACPI_TYPE_DEVICE) {
/* Check if this Device already has a handler for this address space */
next_handler_obj = obj_desc->device.handler;
while (next_handler_obj) {
/* Found a handler, is it for the same address space? */
if (next_handler_obj->address_space.space_id ==
handler_obj->address_space.space_id) {
ACPI_DEBUG_PRINT((ACPI_DB_OPREGION,
"Found handler for region [%s] in device %p(%p) "
"handler %p\n",
acpi_ut_get_region_name
(handler_obj->address_space.
space_id), obj_desc,
next_handler_obj,
handler_obj));
/*
* Since the object we found it on was a device, then it
* means that someone has already installed a handler for
* the branch of the namespace from this device on. Just
* bail out telling the walk routine to not traverse this
* branch. This preserves the scoping rule for handlers.
*/
return (AE_CTRL_DEPTH);
}
/* Walk the linked list of handlers attached to this device */
next_handler_obj = next_handler_obj->address_space.next;
}
/*
* As long as the device didn't have a handler for this space we
* don't care about it. We just ignore it and proceed.
*/
return (AE_OK);
}
/* Object is a Region */
if (obj_desc->region.space_id != handler_obj->address_space.space_id) {
/* This region is for a different address space, just ignore it */
return (AE_OK);
}
/*
* Now we have a region and it is for the handler's address space type.
*
* First disconnect region for any previous handler (if any)
*/
acpi_ev_detach_region(obj_desc, FALSE);
/* Connect the region to the new handler */
status = acpi_ev_attach_region(handler_obj, obj_desc, FALSE);
return (status);
}
/*******************************************************************************
*
* FUNCTION: acpi_ev_install_space_handler
*
* PARAMETERS: Node - Namespace node for the device
* space_id - The address space ID
* Handler - Address of the handler
* Setup - Address of the setup function
* Context - Value passed to the handler on each access
*
* RETURN: Status
*
* DESCRIPTION: Install a handler for all op_regions of a given space_id.
* Assumes namespace is locked
*
******************************************************************************/
acpi_status
acpi_ev_install_space_handler(struct acpi_namespace_node * node,
acpi_adr_space_type space_id,
acpi_adr_space_handler handler,
acpi_adr_space_setup setup, void *context)
{
union acpi_operand_object *obj_desc;
union acpi_operand_object *handler_obj;
acpi_status status;
acpi_object_type type;
u8 flags = 0;
ACPI_FUNCTION_TRACE(ev_install_space_handler);
/*
* This registration is valid for only the types below and the root. This
* is where the default handlers get placed.
*/
if ((node->type != ACPI_TYPE_DEVICE) &&
(node->type != ACPI_TYPE_PROCESSOR) &&
(node->type != ACPI_TYPE_THERMAL) && (node != acpi_gbl_root_node)) {
status = AE_BAD_PARAMETER;
goto unlock_and_exit;
}
if (handler == ACPI_DEFAULT_HANDLER) {
flags = ACPI_ADDR_HANDLER_DEFAULT_INSTALLED;
switch (space_id) {
case ACPI_ADR_SPACE_SYSTEM_MEMORY:
handler = acpi_ex_system_memory_space_handler;
setup = acpi_ev_system_memory_region_setup;
break;
case ACPI_ADR_SPACE_SYSTEM_IO:
handler = acpi_ex_system_io_space_handler;
setup = acpi_ev_io_space_region_setup;
break;
case ACPI_ADR_SPACE_PCI_CONFIG:
handler = acpi_ex_pci_config_space_handler;
setup = acpi_ev_pci_config_region_setup;
break;
case ACPI_ADR_SPACE_CMOS:
handler = acpi_ex_cmos_space_handler;
setup = acpi_ev_cmos_region_setup;
break;
case ACPI_ADR_SPACE_PCI_BAR_TARGET:
handler = acpi_ex_pci_bar_space_handler;
setup = acpi_ev_pci_bar_region_setup;
break;
case ACPI_ADR_SPACE_DATA_TABLE:
handler = acpi_ex_data_table_space_handler;
setup = NULL;
break;
default:
status = AE_BAD_PARAMETER;
goto unlock_and_exit;
}
}
/* If the caller hasn't specified a setup routine, use the default */
if (!setup) {
setup = acpi_ev_default_region_setup;
}
/* Check for an existing internal object */
obj_desc = acpi_ns_get_attached_object(node);
if (obj_desc) {
/*
* The attached device object already exists. Make sure the handler
* is not already installed.
*/
handler_obj = obj_desc->device.handler;
/* Walk the handler list for this device */
while (handler_obj) {
/* Same space_id indicates a handler already installed */
if (handler_obj->address_space.space_id == space_id) {
if (handler_obj->address_space.handler ==
handler) {
/*
* It is (relatively) OK to attempt to install the SAME
* handler twice. This can easily happen with the
* PCI_Config space.
*/
status = AE_SAME_HANDLER;
goto unlock_and_exit;
} else {
/* A handler is already installed */
status = AE_ALREADY_EXISTS;
}
goto unlock_and_exit;
}
/* Walk the linked list of handlers */
handler_obj = handler_obj->address_space.next;
}
} else {
ACPI_DEBUG_PRINT((ACPI_DB_OPREGION,
"Creating object on Device %p while installing handler\n",
node));
/* obj_desc does not exist, create one */
if (node->type == ACPI_TYPE_ANY) {
type = ACPI_TYPE_DEVICE;
} else {
type = node->type;
}
obj_desc = acpi_ut_create_internal_object(type);
if (!obj_desc) {
status = AE_NO_MEMORY;
goto unlock_and_exit;
}
/* Init new descriptor */
obj_desc->common.type = (u8) type;
/* Attach the new object to the Node */
status = acpi_ns_attach_object(node, obj_desc, type);
/* Remove local reference to the object */
acpi_ut_remove_reference(obj_desc);
if (ACPI_FAILURE(status)) {
goto unlock_and_exit;
}
}
ACPI_DEBUG_PRINT((ACPI_DB_OPREGION,
"Installing address handler for region %s(%X) on Device %4.4s %p(%p)\n",
acpi_ut_get_region_name(space_id), space_id,
acpi_ut_get_node_name(node), node, obj_desc));
/*
* Install the handler
*
* At this point there is no existing handler. Just allocate the object
* for the handler and link it into the list.
*/
handler_obj =
acpi_ut_create_internal_object(ACPI_TYPE_LOCAL_ADDRESS_HANDLER);
if (!handler_obj) {
status = AE_NO_MEMORY;
goto unlock_and_exit;
}
/* Init handler obj */
handler_obj->address_space.space_id = (u8) space_id;
handler_obj->address_space.handler_flags = flags;
handler_obj->address_space.region_list = NULL;
handler_obj->address_space.node = node;
handler_obj->address_space.handler = handler;
handler_obj->address_space.context = context;
handler_obj->address_space.setup = setup;
/* Install at head of Device.address_space list */
handler_obj->address_space.next = obj_desc->device.handler;
/*
* The Device object is the first reference on the handler_obj.
* Each region that uses the handler adds a reference.
*/
obj_desc->device.handler = handler_obj;
/*
* Walk the namespace finding all of the regions this
* handler will manage.
*
* Start at the device and search the branch toward
* the leaf nodes until either the leaf is encountered or
* a device is detected that has an address handler of the
* same type.
*
* In either case, back up and search down the remainder
* of the branch
*/
status = acpi_ns_walk_namespace(ACPI_TYPE_ANY, node, ACPI_UINT32_MAX,
ACPI_NS_WALK_UNLOCK,
acpi_ev_install_handler, NULL,
handler_obj, NULL);
unlock_and_exit:
return_ACPI_STATUS(status);
}
/*******************************************************************************
*
* FUNCTION: acpi_ev_execute_reg_methods
*
* PARAMETERS: Node - Namespace node for the device
* space_id - The address space ID
*
* RETURN: Status
*
* DESCRIPTION: Run all _REG methods for the input Space ID;
* Note: assumes namespace is locked, or system init time.
*
******************************************************************************/
acpi_status
acpi_ev_execute_reg_methods(struct acpi_namespace_node *node,
acpi_adr_space_type space_id)
{
acpi_status status;
ACPI_FUNCTION_TRACE(ev_execute_reg_methods);
/*
* Run all _REG methods for all Operation Regions for this space ID. This
* is a separate walk in order to handle any interdependencies between
* regions and _REG methods. (i.e. handlers must be installed for all
* regions of this Space ID before we can run any _REG methods)
*/
status = acpi_ns_walk_namespace(ACPI_TYPE_ANY, node, ACPI_UINT32_MAX,
ACPI_NS_WALK_UNLOCK, acpi_ev_reg_run,
NULL, &space_id, NULL);
return_ACPI_STATUS(status);
}
/*******************************************************************************
*
* FUNCTION: acpi_ev_reg_run
*
* PARAMETERS: walk_namespace callback
*
* DESCRIPTION: Run _REG method for region objects of the requested space_iD
*
******************************************************************************/
static acpi_status
acpi_ev_reg_run(acpi_handle obj_handle,
u32 level, void *context, void **return_value)
{
union acpi_operand_object *obj_desc;
struct acpi_namespace_node *node;
acpi_adr_space_type space_id;
acpi_status status;
space_id = *ACPI_CAST_PTR(acpi_adr_space_type, context);
/* Convert and validate the device handle */
node = acpi_ns_map_handle_to_node(obj_handle);
if (!node) {
return (AE_BAD_PARAMETER);
}
/*
* We only care about regions.and objects that are allowed to have address
* space handlers
*/
if ((node->type != ACPI_TYPE_REGION) && (node != acpi_gbl_root_node)) {
return (AE_OK);
}
/* Check for an existing internal object */
obj_desc = acpi_ns_get_attached_object(node);
if (!obj_desc) {
/* No object, just exit */
return (AE_OK);
}
/* Object is a Region */
if (obj_desc->region.space_id != space_id) {
/* This region is for a different address space, just ignore it */
return (AE_OK);
}
status = acpi_ev_execute_reg_method(obj_desc, 1);
return (status);
}