ARM: at91: fix usart/uart namimg in pinctrl
USART are the full pin uart
DBGU the debug Unit
UART the two pin uart
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
diff --git a/arch/arm/boot/dts/at91sam9260.dtsi b/arch/arm/boot/dts/at91sam9260.dtsi
index 36f55e3..40bf329 100644
--- a/arch/arm/boot/dts/at91sam9260.dtsi
+++ b/arch/arm/boot/dts/at91sam9260.dtsi
@@ -21,8 +21,8 @@
serial2 = &usart1;
serial3 = &usart2;
serial4 = &usart3;
- serial5 = &usart4;
- serial6 = &usart5;
+ serial5 = &uart0;
+ serial6 = &uart1;
gpio0 = &pioA;
gpio1 = &pioB;
gpio2 = &pioC;
@@ -120,88 +120,88 @@
};
};
- uart0 {
- pinctrl_uart0: uart0-0 {
+ usart0 {
+ pinctrl_usart0: usart0-0 {
atmel,pins =
<1 4 0x1 0x0 /* PB4 periph A */
1 5 0x1 0x0>; /* PB5 periph A */
};
- pinctrl_uart0_rts_cts: uart0_rts_cts-0 {
+ pinctrl_usart0_rts_cts: usart0_rts_cts-0 {
atmel,pins =
<1 26 0x1 0x0 /* PB26 periph A */
1 27 0x1 0x0>; /* PB27 periph A */
};
- pinctrl_uart0_dtr_dsr: uart0_dtr_dsr-0 {
+ pinctrl_usart0_dtr_dsr: usart0_dtr_dsr-0 {
atmel,pins =
<1 24 0x1 0x0 /* PB24 periph A */
1 22 0x1 0x0>; /* PB22 periph A */
};
- pinctrl_uart0_dcd: uart0_dcd-0 {
+ pinctrl_usart0_dcd: usart0_dcd-0 {
atmel,pins =
<1 23 0x1 0x0>; /* PB23 periph A */
};
- pinctrl_uart0_ri: uart0_ri-0 {
+ pinctrl_usart0_ri: usart0_ri-0 {
atmel,pins =
<1 25 0x1 0x0>; /* PB25 periph A */
};
};
- uart1 {
- pinctrl_uart1: uart1-0 {
+ usart1 {
+ pinctrl_usart1: usart1-0 {
atmel,pins =
<2 6 0x1 0x1 /* PB6 periph A with pullup */
2 7 0x1 0x0>; /* PB7 periph A */
};
- pinctrl_uart1_rts_cts: uart1_rts_cts-0 {
+ pinctrl_usart1_rts_cts: usart1_rts_cts-0 {
atmel,pins =
<1 28 0x1 0x0 /* PB28 periph A */
1 29 0x1 0x0>; /* PB29 periph A */
};
};
- uart2 {
- pinctrl_uart2: uart2-0 {
+ usart2 {
+ pinctrl_usart2: usart2-0 {
atmel,pins =
<1 8 0x1 0x1 /* PB8 periph A with pullup */
1 9 0x1 0x0>; /* PB9 periph A */
};
- pinctrl_uart2_rts_cts: uart2_rts_cts-0 {
+ pinctrl_usart2_rts_cts: usart2_rts_cts-0 {
atmel,pins =
<0 4 0x1 0x0 /* PA4 periph A */
0 5 0x1 0x0>; /* PA5 periph A */
};
};
- uart3 {
- pinctrl_uart3: uart3-0 {
+ usart3 {
+ pinctrl_usart3: usart3-0 {
atmel,pins =
<2 10 0x1 0x1 /* PB10 periph A with pullup */
2 11 0x1 0x0>; /* PB11 periph A */
};
- pinctrl_uart3_rts_cts: uart3_rts_cts-0 {
+ pinctrl_usart3_rts_cts: usart3_rts_cts-0 {
atmel,pins =
<3 8 0x2 0x0 /* PB8 periph B */
3 10 0x2 0x0>; /* PB10 periph B */
};
};
- uart4 {
- pinctrl_uart4: uart4-0 {
+ uart0 {
+ pinctrl_uart0: uart0-0 {
atmel,pins =
<0 31 0x2 0x1 /* PA31 periph B with pullup */
0 30 0x2 0x0>; /* PA30 periph B */
};
};
- uart5 {
- pinctrl_uart5: uart5-0 {
+ uart1 {
+ pinctrl_uart1: uart1-0 {
atmel,pins =
<2 12 0x1 0x1 /* PB12 periph A with pullup */
2 13 0x1 0x0>; /* PB13 periph A */
@@ -303,7 +303,7 @@
atmel,use-dma-rx;
atmel,use-dma-tx;
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart0>;
+ pinctrl-0 = <&pinctrl_usart0>;
status = "disabled";
};
@@ -314,7 +314,7 @@
atmel,use-dma-rx;
atmel,use-dma-tx;
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart1>;
+ pinctrl-0 = <&pinctrl_usart1>;
status = "disabled";
};
@@ -325,7 +325,7 @@
atmel,use-dma-rx;
atmel,use-dma-tx;
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart2>;
+ pinctrl-0 = <&pinctrl_usart2>;
status = "disabled";
};
@@ -336,29 +336,29 @@
atmel,use-dma-rx;
atmel,use-dma-tx;
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart3>;
+ pinctrl-0 = <&pinctrl_usart3>;
status = "disabled";
};
- usart4: serial@fffd4000 {
+ uart0: serial@fffd4000 {
compatible = "atmel,at91sam9260-usart";
reg = <0xfffd4000 0x200>;
interrupts = <24 4 5>;
atmel,use-dma-rx;
atmel,use-dma-tx;
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart4>;
+ pinctrl-0 = <&pinctrl_uart0>;
status = "disabled";
};
- usart5: serial@fffd8000 {
+ uart1: serial@fffd8000 {
compatible = "atmel,at91sam9260-usart";
reg = <0xfffd8000 0x200>;
interrupts = <25 4 5>;
atmel,use-dma-rx;
atmel,use-dma-tx;
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart5>;
+ pinctrl-0 = <&pinctrl_uart1>;
status = "disabled";
};