ARM: 5919/1: ARM: L2 : Errata 588369: Clean & Invalidate do not invalidate clean lines
This patch implements the work-around for the errata 588369.The secure
API is used to alter L2 debug register because of trust-zone.
This version updated with comments from Russell and Catalin and
generated against 2.6.33-rc6 mainline kernel. Detail
comments can be found:
http://www.spinics.net/lists/linux-omap/msg23431.html
Signed-off-by: Woodruff Richard <r-woodruff2@ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 762ae53..0f1ad74 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -924,6 +924,19 @@
ACTLR register. Note that setting specific bits in the ACTLR register
may not be available in non-secure mode.
+config PL310_ERRATA_588369
+ bool "Clean & Invalidate maintenance operations do not invalidate clean lines"
+ depends on CACHE_L2X0 && ARCH_OMAP4
+ help
+ The PL310 L2 cache controller implements three types of Clean &
+ Invalidate maintenance operations: by Physical Address
+ (offset 0x7F0), by Index/Way (0x7F8) and by Way (0x7FC).
+ They are architecturally defined to behave as the execution of a
+ clean operation followed immediately by an invalidate operation,
+ both performing to the same memory location. This functionality
+ is not correctly implemented in PL310 as clean lines are not
+ invalidated as a result of these operations. Note that this errata
+ uses Texas Instrument's secure monitor api.
endmenu
source "arch/arm/common/Kconfig"
diff --git a/arch/arm/mm/cache-l2x0.c b/arch/arm/mm/cache-l2x0.c
index 1a14d18..0733463 100644
--- a/arch/arm/mm/cache-l2x0.c
+++ b/arch/arm/mm/cache-l2x0.c
@@ -56,12 +56,42 @@
writel(addr, base + L2X0_INV_LINE_PA);
}
+#ifdef CONFIG_PL310_ERRATA_588369
+static void debug_writel(unsigned long val)
+{
+ extern void omap_smc1(u32 fn, u32 arg);
+
+ /*
+ * Texas Instrument secure monitor api to modify the
+ * PL310 Debug Control Register.
+ */
+ omap_smc1(0x100, val);
+}
+
+static inline void l2x0_flush_line(unsigned long addr)
+{
+ void __iomem *base = l2x0_base;
+
+ /* Clean by PA followed by Invalidate by PA */
+ cache_wait(base + L2X0_CLEAN_LINE_PA, 1);
+ writel(addr, base + L2X0_CLEAN_LINE_PA);
+ cache_wait(base + L2X0_INV_LINE_PA, 1);
+ writel(addr, base + L2X0_INV_LINE_PA);
+}
+#else
+
+/* Optimised out for non-errata case */
+static inline void debug_writel(unsigned long val)
+{
+}
+
static inline void l2x0_flush_line(unsigned long addr)
{
void __iomem *base = l2x0_base;
cache_wait(base + L2X0_CLEAN_INV_LINE_PA, 1);
writel(addr, base + L2X0_CLEAN_INV_LINE_PA);
}
+#endif
static inline void l2x0_inv_all(void)
{
@@ -83,13 +113,17 @@
spin_lock_irqsave(&l2x0_lock, flags);
if (start & (CACHE_LINE_SIZE - 1)) {
start &= ~(CACHE_LINE_SIZE - 1);
+ debug_writel(0x03);
l2x0_flush_line(start);
+ debug_writel(0x00);
start += CACHE_LINE_SIZE;
}
if (end & (CACHE_LINE_SIZE - 1)) {
end &= ~(CACHE_LINE_SIZE - 1);
+ debug_writel(0x03);
l2x0_flush_line(end);
+ debug_writel(0x00);
}
while (start < end) {
@@ -145,10 +179,12 @@
while (start < end) {
unsigned long blk_end = start + min(end - start, 4096UL);
+ debug_writel(0x03);
while (start < blk_end) {
l2x0_flush_line(start);
start += CACHE_LINE_SIZE;
}
+ debug_writel(0x00);
if (blk_end < end) {
spin_unlock_irqrestore(&l2x0_lock, flags);