| /* |
| * Backlight driver for Pandora handheld. |
| * Pandora uses TWL4030 PWM0 -> TPS61161 combo for control backlight. |
| * Based on pwm_bl.c |
| * |
| * Copyright 2009,2012 Gražvydas Ignotas <notasas@gmail.com> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/kernel.h> |
| #include <linux/platform_device.h> |
| #include <linux/delay.h> |
| #include <linux/fb.h> |
| #include <linux/backlight.h> |
| #include <linux/i2c/twl.h> |
| #include <linux/err.h> |
| |
| #define TWL_PWM0_ON 0x00 |
| #define TWL_PWM0_OFF 0x01 |
| |
| #define TWL_INTBR_GPBR1 0x0c |
| #define TWL_INTBR_PMBR1 0x0d |
| |
| #define TWL_PMBR1_PWM0_MUXMASK 0x0c |
| #define TWL_PMBR1_PWM0 0x04 |
| #define PWM0_CLK_ENABLE BIT(0) |
| #define PWM0_ENABLE BIT(2) |
| |
| /* range accepted by hardware */ |
| #define MIN_VALUE 9 |
| #define MAX_VALUE 63 |
| #define MAX_USER_VALUE (MAX_VALUE - MIN_VALUE) |
| |
| #define PANDORABL_WAS_OFF BL_CORE_DRIVER1 |
| |
| static int pandora_backlight_update_status(struct backlight_device *bl) |
| { |
| int brightness = bl->props.brightness; |
| u8 r; |
| |
| if (bl->props.power != FB_BLANK_UNBLANK) |
| brightness = 0; |
| if (bl->props.state & BL_CORE_FBBLANK) |
| brightness = 0; |
| if (bl->props.state & BL_CORE_SUSPENDED) |
| brightness = 0; |
| |
| if ((unsigned int)brightness > MAX_USER_VALUE) |
| brightness = MAX_USER_VALUE; |
| |
| if (brightness == 0) { |
| if (bl->props.state & PANDORABL_WAS_OFF) |
| goto done; |
| |
| /* first disable PWM0 output, then clock */ |
| twl_i2c_read_u8(TWL4030_MODULE_INTBR, &r, TWL_INTBR_GPBR1); |
| r &= ~PWM0_ENABLE; |
| twl_i2c_write_u8(TWL4030_MODULE_INTBR, r, TWL_INTBR_GPBR1); |
| r &= ~PWM0_CLK_ENABLE; |
| twl_i2c_write_u8(TWL4030_MODULE_INTBR, r, TWL_INTBR_GPBR1); |
| |
| goto done; |
| } |
| |
| if (bl->props.state & PANDORABL_WAS_OFF) { |
| /* |
| * set PWM duty cycle to max. TPS61161 seems to use this |
| * to calibrate it's PWM sensitivity when it starts. |
| */ |
| twl_i2c_write_u8(TWL_MODULE_PWM, MAX_VALUE, TWL_PWM0_OFF); |
| |
| /* first enable clock, then PWM0 out */ |
| twl_i2c_read_u8(TWL4030_MODULE_INTBR, &r, TWL_INTBR_GPBR1); |
| r &= ~PWM0_ENABLE; |
| r |= PWM0_CLK_ENABLE; |
| twl_i2c_write_u8(TWL4030_MODULE_INTBR, r, TWL_INTBR_GPBR1); |
| r |= PWM0_ENABLE; |
| twl_i2c_write_u8(TWL4030_MODULE_INTBR, r, TWL_INTBR_GPBR1); |
| |
| /* |
| * TI made it very easy to enable digital control, so easy that |
| * it often triggers unintentionally and disabes PWM control, |
| * so wait until 1 wire mode detection window ends. |
| */ |
| usleep_range(2000, 10000); |
| } |
| |
| twl_i2c_write_u8(TWL_MODULE_PWM, MIN_VALUE + brightness, TWL_PWM0_OFF); |
| |
| done: |
| if (brightness != 0) |
| bl->props.state &= ~PANDORABL_WAS_OFF; |
| else |
| bl->props.state |= PANDORABL_WAS_OFF; |
| |
| return 0; |
| } |
| |
| static int pandora_backlight_get_brightness(struct backlight_device *bl) |
| { |
| return bl->props.brightness; |
| } |
| |
| static const struct backlight_ops pandora_backlight_ops = { |
| .options = BL_CORE_SUSPENDRESUME, |
| .update_status = pandora_backlight_update_status, |
| .get_brightness = pandora_backlight_get_brightness, |
| }; |
| |
| static int pandora_backlight_probe(struct platform_device *pdev) |
| { |
| struct backlight_properties props; |
| struct backlight_device *bl; |
| u8 r; |
| |
| memset(&props, 0, sizeof(props)); |
| props.max_brightness = MAX_USER_VALUE; |
| props.type = BACKLIGHT_RAW; |
| bl = backlight_device_register(pdev->name, &pdev->dev, |
| NULL, &pandora_backlight_ops, &props); |
| if (IS_ERR(bl)) { |
| dev_err(&pdev->dev, "failed to register backlight\n"); |
| return PTR_ERR(bl); |
| } |
| |
| platform_set_drvdata(pdev, bl); |
| |
| /* 64 cycle period, ON position 0 */ |
| twl_i2c_write_u8(TWL_MODULE_PWM, 0x80, TWL_PWM0_ON); |
| |
| bl->props.state |= PANDORABL_WAS_OFF; |
| bl->props.brightness = MAX_USER_VALUE; |
| backlight_update_status(bl); |
| |
| /* enable PWM function in pin mux */ |
| twl_i2c_read_u8(TWL4030_MODULE_INTBR, &r, TWL_INTBR_PMBR1); |
| r &= ~TWL_PMBR1_PWM0_MUXMASK; |
| r |= TWL_PMBR1_PWM0; |
| twl_i2c_write_u8(TWL4030_MODULE_INTBR, r, TWL_INTBR_PMBR1); |
| |
| return 0; |
| } |
| |
| static int pandora_backlight_remove(struct platform_device *pdev) |
| { |
| struct backlight_device *bl = platform_get_drvdata(pdev); |
| backlight_device_unregister(bl); |
| return 0; |
| } |
| |
| static struct platform_driver pandora_backlight_driver = { |
| .driver = { |
| .name = "pandora-backlight", |
| .owner = THIS_MODULE, |
| }, |
| .probe = pandora_backlight_probe, |
| .remove = pandora_backlight_remove, |
| }; |
| |
| module_platform_driver(pandora_backlight_driver); |
| |
| MODULE_AUTHOR("Gražvydas Ignotas <notasas@gmail.com>"); |
| MODULE_DESCRIPTION("Pandora Backlight Driver"); |
| MODULE_LICENSE("GPL"); |
| MODULE_ALIAS("platform:pandora-backlight"); |