iwlwifi: 802.11n add support to 8K A-MSDU Rx frames
This patch give the iwlwifi the ability to support A-MSDU up to 8K
Please notice - in order to work in 8K A-MSDU ucode support is needed,
version 4.44.1.19 (soon to be published). 4K A-MSDU works in current ucode
version as well.
Signed-off-by: Ron Rindjunsky <ron.rindjunsky@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
diff --git a/drivers/net/wireless/iwlwifi/iwl-4965.c b/drivers/net/wireless/iwlwifi/iwl-4965.c
index 55d6100..f65fd6e 100644
--- a/drivers/net/wireless/iwlwifi/iwl-4965.c
+++ b/drivers/net/wireless/iwlwifi/iwl-4965.c
@@ -226,6 +226,7 @@
{
int rc;
unsigned long flags;
+ unsigned int rb_size;
spin_lock_irqsave(&priv->lock, flags);
rc = iwl4965_grab_nic_access(priv);
@@ -234,6 +235,11 @@
return rc;
}
+ if (iwl4965_param_amsdu_size_8K)
+ rb_size = FH_RCSR_RX_CONFIG_REG_VAL_RB_SIZE_8K;
+ else
+ rb_size = FH_RCSR_RX_CONFIG_REG_VAL_RB_SIZE_4K;
+
/* Stop Rx DMA */
iwl4965_write_direct32(priv, FH_MEM_RCSR_CHNL0_CONFIG_REG, 0);
@@ -253,7 +259,7 @@
iwl4965_write_direct32(priv, FH_MEM_RCSR_CHNL0_CONFIG_REG,
FH_RCSR_RX_CONFIG_CHNL_EN_ENABLE_VAL |
FH_RCSR_CHNL0_RX_CONFIG_IRQ_DEST_INT_HOST_VAL |
- IWL_FH_RCSR_RX_CONFIG_REG_VAL_RB_SIZE_4K |
+ rb_size |
/*0x10 << 4 | */
(RX_QUEUE_SIZE_LOG <<
FH_RCSR_RX_CONFIG_RBDCB_SIZE_BITSHIFT));
@@ -1771,7 +1777,11 @@
priv->hw_setting.tx_cmd_len = sizeof(struct iwl4965_tx_cmd);
priv->hw_setting.max_rxq_size = RX_QUEUE_SIZE;
priv->hw_setting.max_rxq_log = RX_QUEUE_SIZE_LOG;
-
+ if (iwl4965_param_amsdu_size_8K)
+ priv->hw_setting.rx_buf_size = IWL_RX_BUF_SIZE_8K;
+ else
+ priv->hw_setting.rx_buf_size = IWL_RX_BUF_SIZE_4K;
+ priv->hw_setting.max_pkt_size = priv->hw_setting.rx_buf_size - 256;
priv->hw_setting.max_stations = IWL4965_STATION_COUNT;
priv->hw_setting.bcast_sta_id = IWL4965_BROADCAST_ID;
return 0;
@@ -3619,7 +3629,7 @@
rx_start->byte_count = amsdu->byte_count;
rx_end = (__le32 *) (((u8 *) hdr) + len);
}
- if (len > IWL_RX_BUF_SIZE || len < 16) {
+ if (len > priv->hw_setting.max_pkt_size || len < 16) {
IWL_WARNING("byte count out of range [16,4K]"
" : %d\n", len);
return;
@@ -3785,6 +3795,10 @@
ht_info->cap |= (u16)IEEE80211_HT_CAP_SGI_20;
ht_info->cap |= (u16)(IEEE80211_HT_CAP_MIMO_PS &
(IWL_MIMO_PS_NONE << 2));
+ if (iwl4965_param_amsdu_size_8K) {
+ printk(KERN_DEBUG "iwl4965 in A-MSDU 8K support mode\n");
+ ht_info->cap |= (u16)IEEE80211_HT_CAP_MAX_AMSDU;
+ }
ht_info->ampdu_factor = CFG_HT_RX_AMPDU_FACTOR_DEF;
ht_info->ampdu_density = CFG_HT_MPDU_DENSITY_DEF;