| /* pci.c: UltraSparc PCI controller support. |
| * |
| * Copyright (C) 1997, 1998, 1999 David S. Miller (davem@redhat.com) |
| * Copyright (C) 1998, 1999 Eddie C. Dost (ecd@skynet.be) |
| * Copyright (C) 1999 Jakub Jelinek (jj@ultra.linux.cz) |
| * |
| * OF tree based PCI bus probing taken from the PowerPC port |
| * with minor modifications, see there for credits. |
| */ |
| |
| #include <linux/export.h> |
| #include <linux/kernel.h> |
| #include <linux/string.h> |
| #include <linux/sched.h> |
| #include <linux/capability.h> |
| #include <linux/errno.h> |
| #include <linux/pci.h> |
| #include <linux/msi.h> |
| #include <linux/irq.h> |
| #include <linux/init.h> |
| #include <linux/of.h> |
| #include <linux/of_device.h> |
| |
| #include <asm/uaccess.h> |
| #include <asm/pgtable.h> |
| #include <asm/irq.h> |
| #include <asm/prom.h> |
| #include <asm/apb.h> |
| |
| #include "pci_impl.h" |
| #include "kernel.h" |
| |
| /* List of all PCI controllers found in the system. */ |
| struct pci_pbm_info *pci_pbm_root = NULL; |
| |
| /* Each PBM found gets a unique index. */ |
| int pci_num_pbms = 0; |
| |
| volatile int pci_poke_in_progress; |
| volatile int pci_poke_cpu = -1; |
| volatile int pci_poke_faulted; |
| |
| static DEFINE_SPINLOCK(pci_poke_lock); |
| |
| void pci_config_read8(u8 *addr, u8 *ret) |
| { |
| unsigned long flags; |
| u8 byte; |
| |
| spin_lock_irqsave(&pci_poke_lock, flags); |
| pci_poke_cpu = smp_processor_id(); |
| pci_poke_in_progress = 1; |
| pci_poke_faulted = 0; |
| __asm__ __volatile__("membar #Sync\n\t" |
| "lduba [%1] %2, %0\n\t" |
| "membar #Sync" |
| : "=r" (byte) |
| : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L) |
| : "memory"); |
| pci_poke_in_progress = 0; |
| pci_poke_cpu = -1; |
| if (!pci_poke_faulted) |
| *ret = byte; |
| spin_unlock_irqrestore(&pci_poke_lock, flags); |
| } |
| |
| void pci_config_read16(u16 *addr, u16 *ret) |
| { |
| unsigned long flags; |
| u16 word; |
| |
| spin_lock_irqsave(&pci_poke_lock, flags); |
| pci_poke_cpu = smp_processor_id(); |
| pci_poke_in_progress = 1; |
| pci_poke_faulted = 0; |
| __asm__ __volatile__("membar #Sync\n\t" |
| "lduha [%1] %2, %0\n\t" |
| "membar #Sync" |
| : "=r" (word) |
| : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L) |
| : "memory"); |
| pci_poke_in_progress = 0; |
| pci_poke_cpu = -1; |
| if (!pci_poke_faulted) |
| *ret = word; |
| spin_unlock_irqrestore(&pci_poke_lock, flags); |
| } |
| |
| void pci_config_read32(u32 *addr, u32 *ret) |
| { |
| unsigned long flags; |
| u32 dword; |
| |
| spin_lock_irqsave(&pci_poke_lock, flags); |
| pci_poke_cpu = smp_processor_id(); |
| pci_poke_in_progress = 1; |
| pci_poke_faulted = 0; |
| __asm__ __volatile__("membar #Sync\n\t" |
| "lduwa [%1] %2, %0\n\t" |
| "membar #Sync" |
| : "=r" (dword) |
| : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L) |
| : "memory"); |
| pci_poke_in_progress = 0; |
| pci_poke_cpu = -1; |
| if (!pci_poke_faulted) |
| *ret = dword; |
| spin_unlock_irqrestore(&pci_poke_lock, flags); |
| } |
| |
| void pci_config_write8(u8 *addr, u8 val) |
| { |
| unsigned long flags; |
| |
| spin_lock_irqsave(&pci_poke_lock, flags); |
| pci_poke_cpu = smp_processor_id(); |
| pci_poke_in_progress = 1; |
| pci_poke_faulted = 0; |
| __asm__ __volatile__("membar #Sync\n\t" |
| "stba %0, [%1] %2\n\t" |
| "membar #Sync" |
| : /* no outputs */ |
| : "r" (val), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L) |
| : "memory"); |
| pci_poke_in_progress = 0; |
| pci_poke_cpu = -1; |
| spin_unlock_irqrestore(&pci_poke_lock, flags); |
| } |
| |
| void pci_config_write16(u16 *addr, u16 val) |
| { |
| unsigned long flags; |
| |
| spin_lock_irqsave(&pci_poke_lock, flags); |
| pci_poke_cpu = smp_processor_id(); |
| pci_poke_in_progress = 1; |
| pci_poke_faulted = 0; |
| __asm__ __volatile__("membar #Sync\n\t" |
| "stha %0, [%1] %2\n\t" |
| "membar #Sync" |
| : /* no outputs */ |
| : "r" (val), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L) |
| : "memory"); |
| pci_poke_in_progress = 0; |
| pci_poke_cpu = -1; |
| spin_unlock_irqrestore(&pci_poke_lock, flags); |
| } |
| |
| void pci_config_write32(u32 *addr, u32 val) |
| { |
| unsigned long flags; |
| |
| spin_lock_irqsave(&pci_poke_lock, flags); |
| pci_poke_cpu = smp_processor_id(); |
| pci_poke_in_progress = 1; |
| pci_poke_faulted = 0; |
| __asm__ __volatile__("membar #Sync\n\t" |
| "stwa %0, [%1] %2\n\t" |
| "membar #Sync" |
| : /* no outputs */ |
| : "r" (val), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L) |
| : "memory"); |
| pci_poke_in_progress = 0; |
| pci_poke_cpu = -1; |
| spin_unlock_irqrestore(&pci_poke_lock, flags); |
| } |
| |
| static int ofpci_verbose; |
| |
| static int __init ofpci_debug(char *str) |
| { |
| int val = 0; |
| |
| get_option(&str, &val); |
| if (val) |
| ofpci_verbose = 1; |
| return 1; |
| } |
| |
| __setup("ofpci_debug=", ofpci_debug); |
| |
| static unsigned long pci_parse_of_flags(u32 addr0) |
| { |
| unsigned long flags = 0; |
| |
| if (addr0 & 0x02000000) { |
| flags = IORESOURCE_MEM | PCI_BASE_ADDRESS_SPACE_MEMORY; |
| flags |= (addr0 >> 22) & PCI_BASE_ADDRESS_MEM_TYPE_64; |
| flags |= (addr0 >> 28) & PCI_BASE_ADDRESS_MEM_TYPE_1M; |
| if (addr0 & 0x40000000) |
| flags |= IORESOURCE_PREFETCH |
| | PCI_BASE_ADDRESS_MEM_PREFETCH; |
| } else if (addr0 & 0x01000000) |
| flags = IORESOURCE_IO | PCI_BASE_ADDRESS_SPACE_IO; |
| return flags; |
| } |
| |
| /* The of_device layer has translated all of the assigned-address properties |
| * into physical address resources, we only have to figure out the register |
| * mapping. |
| */ |
| static void pci_parse_of_addrs(struct platform_device *op, |
| struct device_node *node, |
| struct pci_dev *dev) |
| { |
| struct resource *op_res; |
| const u32 *addrs; |
| int proplen; |
| |
| addrs = of_get_property(node, "assigned-addresses", &proplen); |
| if (!addrs) |
| return; |
| if (ofpci_verbose) |
| printk(" parse addresses (%d bytes) @ %p\n", |
| proplen, addrs); |
| op_res = &op->resource[0]; |
| for (; proplen >= 20; proplen -= 20, addrs += 5, op_res++) { |
| struct resource *res; |
| unsigned long flags; |
| int i; |
| |
| flags = pci_parse_of_flags(addrs[0]); |
| if (!flags) |
| continue; |
| i = addrs[0] & 0xff; |
| if (ofpci_verbose) |
| printk(" start: %llx, end: %llx, i: %x\n", |
| op_res->start, op_res->end, i); |
| |
| if (PCI_BASE_ADDRESS_0 <= i && i <= PCI_BASE_ADDRESS_5) { |
| res = &dev->resource[(i - PCI_BASE_ADDRESS_0) >> 2]; |
| } else if (i == dev->rom_base_reg) { |
| res = &dev->resource[PCI_ROM_RESOURCE]; |
| flags |= IORESOURCE_READONLY | IORESOURCE_CACHEABLE |
| | IORESOURCE_SIZEALIGN; |
| } else { |
| printk(KERN_ERR "PCI: bad cfg reg num 0x%x\n", i); |
| continue; |
| } |
| res->start = op_res->start; |
| res->end = op_res->end; |
| res->flags = flags; |
| res->name = pci_name(dev); |
| } |
| } |
| |
| static struct pci_dev *of_create_pci_dev(struct pci_pbm_info *pbm, |
| struct device_node *node, |
| struct pci_bus *bus, int devfn) |
| { |
| struct dev_archdata *sd; |
| struct pci_slot *slot; |
| struct platform_device *op; |
| struct pci_dev *dev; |
| const char *type; |
| u32 class; |
| |
| dev = pci_alloc_dev(bus); |
| if (!dev) |
| return NULL; |
| |
| sd = &dev->dev.archdata; |
| sd->iommu = pbm->iommu; |
| sd->stc = &pbm->stc; |
| sd->host_controller = pbm; |
| sd->op = op = of_find_device_by_node(node); |
| sd->numa_node = pbm->numa_node; |
| |
| sd = &op->dev.archdata; |
| sd->iommu = pbm->iommu; |
| sd->stc = &pbm->stc; |
| sd->numa_node = pbm->numa_node; |
| |
| if (!strcmp(node->name, "ebus")) |
| of_propagate_archdata(op); |
| |
| type = of_get_property(node, "device_type", NULL); |
| if (type == NULL) |
| type = ""; |
| |
| if (ofpci_verbose) |
| printk(" create device, devfn: %x, type: %s\n", |
| devfn, type); |
| |
| dev->sysdata = node; |
| dev->dev.parent = bus->bridge; |
| dev->dev.bus = &pci_bus_type; |
| dev->dev.of_node = of_node_get(node); |
| dev->devfn = devfn; |
| dev->multifunction = 0; /* maybe a lie? */ |
| set_pcie_port_type(dev); |
| |
| list_for_each_entry(slot, &dev->bus->slots, list) |
| if (PCI_SLOT(dev->devfn) == slot->number) |
| dev->slot = slot; |
| |
| dev->vendor = of_getintprop_default(node, "vendor-id", 0xffff); |
| dev->device = of_getintprop_default(node, "device-id", 0xffff); |
| dev->subsystem_vendor = |
| of_getintprop_default(node, "subsystem-vendor-id", 0); |
| dev->subsystem_device = |
| of_getintprop_default(node, "subsystem-id", 0); |
| |
| dev->cfg_size = pci_cfg_space_size(dev); |
| |
| /* We can't actually use the firmware value, we have |
| * to read what is in the register right now. One |
| * reason is that in the case of IDE interfaces the |
| * firmware can sample the value before the the IDE |
| * interface is programmed into native mode. |
| */ |
| pci_read_config_dword(dev, PCI_CLASS_REVISION, &class); |
| dev->class = class >> 8; |
| dev->revision = class & 0xff; |
| |
| dev_set_name(&dev->dev, "%04x:%02x:%02x.%d", pci_domain_nr(bus), |
| dev->bus->number, PCI_SLOT(devfn), PCI_FUNC(devfn)); |
| |
| if (ofpci_verbose) |
| printk(" class: 0x%x device name: %s\n", |
| dev->class, pci_name(dev)); |
| |
| /* I have seen IDE devices which will not respond to |
| * the bmdma simplex check reads if bus mastering is |
| * disabled. |
| */ |
| if ((dev->class >> 8) == PCI_CLASS_STORAGE_IDE) |
| pci_set_master(dev); |
| |
| dev->current_state = PCI_UNKNOWN; /* unknown power state */ |
| dev->error_state = pci_channel_io_normal; |
| dev->dma_mask = 0xffffffff; |
| |
| if (!strcmp(node->name, "pci")) { |
| /* a PCI-PCI bridge */ |
| dev->hdr_type = PCI_HEADER_TYPE_BRIDGE; |
| dev->rom_base_reg = PCI_ROM_ADDRESS1; |
| } else if (!strcmp(type, "cardbus")) { |
| dev->hdr_type = PCI_HEADER_TYPE_CARDBUS; |
| } else { |
| dev->hdr_type = PCI_HEADER_TYPE_NORMAL; |
| dev->rom_base_reg = PCI_ROM_ADDRESS; |
| |
| dev->irq = sd->op->archdata.irqs[0]; |
| if (dev->irq == 0xffffffff) |
| dev->irq = PCI_IRQ_NONE; |
| } |
| |
| pci_parse_of_addrs(sd->op, node, dev); |
| |
| if (ofpci_verbose) |
| printk(" adding to system ...\n"); |
| |
| pci_device_add(dev, bus); |
| |
| return dev; |
| } |
| |
| static void apb_calc_first_last(u8 map, u32 *first_p, u32 *last_p) |
| { |
| u32 idx, first, last; |
| |
| first = 8; |
| last = 0; |
| for (idx = 0; idx < 8; idx++) { |
| if ((map & (1 << idx)) != 0) { |
| if (first > idx) |
| first = idx; |
| if (last < idx) |
| last = idx; |
| } |
| } |
| |
| *first_p = first; |
| *last_p = last; |
| } |
| |
| /* Cook up fake bus resources for SUNW,simba PCI bridges which lack |
| * a proper 'ranges' property. |
| */ |
| static void apb_fake_ranges(struct pci_dev *dev, |
| struct pci_bus *bus, |
| struct pci_pbm_info *pbm) |
| { |
| struct pci_bus_region region; |
| struct resource *res; |
| u32 first, last; |
| u8 map; |
| |
| pci_read_config_byte(dev, APB_IO_ADDRESS_MAP, &map); |
| apb_calc_first_last(map, &first, &last); |
| res = bus->resource[0]; |
| res->flags = IORESOURCE_IO; |
| region.start = (first << 21); |
| region.end = (last << 21) + ((1 << 21) - 1); |
| pcibios_bus_to_resource(dev->bus, res, ®ion); |
| |
| pci_read_config_byte(dev, APB_MEM_ADDRESS_MAP, &map); |
| apb_calc_first_last(map, &first, &last); |
| res = bus->resource[1]; |
| res->flags = IORESOURCE_MEM; |
| region.start = (first << 29); |
| region.end = (last << 29) + ((1 << 29) - 1); |
| pcibios_bus_to_resource(dev->bus, res, ®ion); |
| } |
| |
| static void pci_of_scan_bus(struct pci_pbm_info *pbm, |
| struct device_node *node, |
| struct pci_bus *bus); |
| |
| #define GET_64BIT(prop, i) ((((u64) (prop)[(i)]) << 32) | (prop)[(i)+1]) |
| |
| static void of_scan_pci_bridge(struct pci_pbm_info *pbm, |
| struct device_node *node, |
| struct pci_dev *dev) |
| { |
| struct pci_bus *bus; |
| const u32 *busrange, *ranges; |
| int len, i, simba; |
| struct pci_bus_region region; |
| struct resource *res; |
| unsigned int flags; |
| u64 size; |
| |
| if (ofpci_verbose) |
| printk("of_scan_pci_bridge(%s)\n", node->full_name); |
| |
| /* parse bus-range property */ |
| busrange = of_get_property(node, "bus-range", &len); |
| if (busrange == NULL || len != 8) { |
| printk(KERN_DEBUG "Can't get bus-range for PCI-PCI bridge %s\n", |
| node->full_name); |
| return; |
| } |
| |
| if (ofpci_verbose) |
| printk(" Bridge bus range [%u --> %u]\n", |
| busrange[0], busrange[1]); |
| |
| ranges = of_get_property(node, "ranges", &len); |
| simba = 0; |
| if (ranges == NULL) { |
| const char *model = of_get_property(node, "model", NULL); |
| if (model && !strcmp(model, "SUNW,simba")) |
| simba = 1; |
| } |
| |
| bus = pci_add_new_bus(dev->bus, dev, busrange[0]); |
| if (!bus) { |
| printk(KERN_ERR "Failed to create pci bus for %s\n", |
| node->full_name); |
| return; |
| } |
| |
| bus->primary = dev->bus->number; |
| pci_bus_insert_busn_res(bus, busrange[0], busrange[1]); |
| bus->bridge_ctl = 0; |
| |
| if (ofpci_verbose) |
| printk(" Bridge ranges[%p] simba[%d]\n", |
| ranges, simba); |
| |
| /* parse ranges property, or cook one up by hand for Simba */ |
| /* PCI #address-cells == 3 and #size-cells == 2 always */ |
| res = &dev->resource[PCI_BRIDGE_RESOURCES]; |
| for (i = 0; i < PCI_NUM_RESOURCES - PCI_BRIDGE_RESOURCES; ++i) { |
| res->flags = 0; |
| bus->resource[i] = res; |
| ++res; |
| } |
| if (simba) { |
| apb_fake_ranges(dev, bus, pbm); |
| goto after_ranges; |
| } else if (ranges == NULL) { |
| pci_read_bridge_bases(bus); |
| goto after_ranges; |
| } |
| i = 1; |
| for (; len >= 32; len -= 32, ranges += 8) { |
| u64 start; |
| |
| if (ofpci_verbose) |
| printk(" RAW Range[%08x:%08x:%08x:%08x:%08x:%08x:" |
| "%08x:%08x]\n", |
| ranges[0], ranges[1], ranges[2], ranges[3], |
| ranges[4], ranges[5], ranges[6], ranges[7]); |
| |
| flags = pci_parse_of_flags(ranges[0]); |
| size = GET_64BIT(ranges, 6); |
| if (flags == 0 || size == 0) |
| continue; |
| |
| /* On PCI-Express systems, PCI bridges that have no devices downstream |
| * have a bogus size value where the first 32-bit cell is 0xffffffff. |
| * This results in a bogus range where start + size overflows. |
| * |
| * Just skip these otherwise the kernel will complain when the resource |
| * tries to be claimed. |
| */ |
| if (size >> 32 == 0xffffffff) |
| continue; |
| |
| if (flags & IORESOURCE_IO) { |
| res = bus->resource[0]; |
| if (res->flags) { |
| printk(KERN_ERR "PCI: ignoring extra I/O range" |
| " for bridge %s\n", node->full_name); |
| continue; |
| } |
| } else { |
| if (i >= PCI_NUM_RESOURCES - PCI_BRIDGE_RESOURCES) { |
| printk(KERN_ERR "PCI: too many memory ranges" |
| " for bridge %s\n", node->full_name); |
| continue; |
| } |
| res = bus->resource[i]; |
| ++i; |
| } |
| |
| res->flags = flags; |
| region.start = start = GET_64BIT(ranges, 1); |
| region.end = region.start + size - 1; |
| |
| if (ofpci_verbose) |
| printk(" Using flags[%08x] start[%016llx] size[%016llx]\n", |
| flags, start, size); |
| |
| pcibios_bus_to_resource(dev->bus, res, ®ion); |
| } |
| after_ranges: |
| sprintf(bus->name, "PCI Bus %04x:%02x", pci_domain_nr(bus), |
| bus->number); |
| if (ofpci_verbose) |
| printk(" bus name: %s\n", bus->name); |
| |
| pci_of_scan_bus(pbm, node, bus); |
| } |
| |
| static void pci_of_scan_bus(struct pci_pbm_info *pbm, |
| struct device_node *node, |
| struct pci_bus *bus) |
| { |
| struct device_node *child; |
| const u32 *reg; |
| int reglen, devfn, prev_devfn; |
| struct pci_dev *dev; |
| |
| if (ofpci_verbose) |
| printk("PCI: scan_bus[%s] bus no %d\n", |
| node->full_name, bus->number); |
| |
| child = NULL; |
| prev_devfn = -1; |
| while ((child = of_get_next_child(node, child)) != NULL) { |
| if (ofpci_verbose) |
| printk(" * %s\n", child->full_name); |
| reg = of_get_property(child, "reg", ®len); |
| if (reg == NULL || reglen < 20) |
| continue; |
| |
| devfn = (reg[0] >> 8) & 0xff; |
| |
| /* This is a workaround for some device trees |
| * which list PCI devices twice. On the V100 |
| * for example, device number 3 is listed twice. |
| * Once as "pm" and once again as "lomp". |
| */ |
| if (devfn == prev_devfn) |
| continue; |
| prev_devfn = devfn; |
| |
| /* create a new pci_dev for this device */ |
| dev = of_create_pci_dev(pbm, child, bus, devfn); |
| if (!dev) |
| continue; |
| if (ofpci_verbose) |
| printk("PCI: dev header type: %x\n", |
| dev->hdr_type); |
| |
| if (pci_is_bridge(dev)) |
| of_scan_pci_bridge(pbm, child, dev); |
| } |
| } |
| |
| static ssize_t |
| show_pciobppath_attr(struct device * dev, struct device_attribute * attr, char * buf) |
| { |
| struct pci_dev *pdev; |
| struct device_node *dp; |
| |
| pdev = to_pci_dev(dev); |
| dp = pdev->dev.of_node; |
| |
| return snprintf (buf, PAGE_SIZE, "%s\n", dp->full_name); |
| } |
| |
| static DEVICE_ATTR(obppath, S_IRUSR | S_IRGRP | S_IROTH, show_pciobppath_attr, NULL); |
| |
| static void pci_bus_register_of_sysfs(struct pci_bus *bus) |
| { |
| struct pci_dev *dev; |
| struct pci_bus *child_bus; |
| int err; |
| |
| list_for_each_entry(dev, &bus->devices, bus_list) { |
| /* we don't really care if we can create this file or |
| * not, but we need to assign the result of the call |
| * or the world will fall under alien invasion and |
| * everybody will be frozen on a spaceship ready to be |
| * eaten on alpha centauri by some green and jelly |
| * humanoid. |
| */ |
| err = sysfs_create_file(&dev->dev.kobj, &dev_attr_obppath.attr); |
| (void) err; |
| } |
| list_for_each_entry(child_bus, &bus->children, node) |
| pci_bus_register_of_sysfs(child_bus); |
| } |
| |
| static void pci_claim_bus_resources(struct pci_bus *bus) |
| { |
| struct pci_bus *child_bus; |
| struct pci_dev *dev; |
| |
| list_for_each_entry(dev, &bus->devices, bus_list) { |
| int i; |
| |
| for (i = 0; i < PCI_NUM_RESOURCES; i++) { |
| struct resource *r = &dev->resource[i]; |
| |
| if (r->parent || !r->start || !r->flags) |
| continue; |
| |
| if (ofpci_verbose) |
| printk("PCI: Claiming %s: " |
| "Resource %d: %016llx..%016llx [%x]\n", |
| pci_name(dev), i, |
| (unsigned long long)r->start, |
| (unsigned long long)r->end, |
| (unsigned int)r->flags); |
| |
| pci_claim_resource(dev, i); |
| } |
| } |
| |
| list_for_each_entry(child_bus, &bus->children, node) |
| pci_claim_bus_resources(child_bus); |
| } |
| |
| struct pci_bus *pci_scan_one_pbm(struct pci_pbm_info *pbm, |
| struct device *parent) |
| { |
| LIST_HEAD(resources); |
| struct device_node *node = pbm->op->dev.of_node; |
| struct pci_bus *bus; |
| |
| printk("PCI: Scanning PBM %s\n", node->full_name); |
| |
| pci_add_resource_offset(&resources, &pbm->io_space, |
| pbm->io_space.start); |
| pci_add_resource_offset(&resources, &pbm->mem_space, |
| pbm->mem_space.start); |
| pbm->busn.start = pbm->pci_first_busno; |
| pbm->busn.end = pbm->pci_last_busno; |
| pbm->busn.flags = IORESOURCE_BUS; |
| pci_add_resource(&resources, &pbm->busn); |
| bus = pci_create_root_bus(parent, pbm->pci_first_busno, pbm->pci_ops, |
| pbm, &resources); |
| if (!bus) { |
| printk(KERN_ERR "Failed to create bus for %s\n", |
| node->full_name); |
| pci_free_resource_list(&resources); |
| return NULL; |
| } |
| |
| pci_of_scan_bus(pbm, node, bus); |
| pci_bus_add_devices(bus); |
| pci_bus_register_of_sysfs(bus); |
| |
| pci_claim_bus_resources(bus); |
| |
| return bus; |
| } |
| |
| void pcibios_fixup_bus(struct pci_bus *pbus) |
| { |
| } |
| |
| resource_size_t pcibios_align_resource(void *data, const struct resource *res, |
| resource_size_t size, resource_size_t align) |
| { |
| return res->start; |
| } |
| |
| int pcibios_enable_device(struct pci_dev *dev, int mask) |
| { |
| u16 cmd, oldcmd; |
| int i; |
| |
| pci_read_config_word(dev, PCI_COMMAND, &cmd); |
| oldcmd = cmd; |
| |
| for (i = 0; i < PCI_NUM_RESOURCES; i++) { |
| struct resource *res = &dev->resource[i]; |
| |
| /* Only set up the requested stuff */ |
| if (!(mask & (1<<i))) |
| continue; |
| |
| if (res->flags & IORESOURCE_IO) |
| cmd |= PCI_COMMAND_IO; |
| if (res->flags & IORESOURCE_MEM) |
| cmd |= PCI_COMMAND_MEMORY; |
| } |
| |
| if (cmd != oldcmd) { |
| printk(KERN_DEBUG "PCI: Enabling device: (%s), cmd %x\n", |
| pci_name(dev), cmd); |
| /* Enable the appropriate bits in the PCI command register. */ |
| pci_write_config_word(dev, PCI_COMMAND, cmd); |
| } |
| return 0; |
| } |
| |
| /* Platform support for /proc/bus/pci/X/Y mmap()s. */ |
| |
| /* If the user uses a host-bridge as the PCI device, he may use |
| * this to perform a raw mmap() of the I/O or MEM space behind |
| * that controller. |
| * |
| * This can be useful for execution of x86 PCI bios initialization code |
| * on a PCI card, like the xfree86 int10 stuff does. |
| */ |
| static int __pci_mmap_make_offset_bus(struct pci_dev *pdev, struct vm_area_struct *vma, |
| enum pci_mmap_state mmap_state) |
| { |
| struct pci_pbm_info *pbm = pdev->dev.archdata.host_controller; |
| unsigned long space_size, user_offset, user_size; |
| |
| if (mmap_state == pci_mmap_io) { |
| space_size = resource_size(&pbm->io_space); |
| } else { |
| space_size = resource_size(&pbm->mem_space); |
| } |
| |
| /* Make sure the request is in range. */ |
| user_offset = vma->vm_pgoff << PAGE_SHIFT; |
| user_size = vma->vm_end - vma->vm_start; |
| |
| if (user_offset >= space_size || |
| (user_offset + user_size) > space_size) |
| return -EINVAL; |
| |
| if (mmap_state == pci_mmap_io) { |
| vma->vm_pgoff = (pbm->io_space.start + |
| user_offset) >> PAGE_SHIFT; |
| } else { |
| vma->vm_pgoff = (pbm->mem_space.start + |
| user_offset) >> PAGE_SHIFT; |
| } |
| |
| return 0; |
| } |
| |
| /* Adjust vm_pgoff of VMA such that it is the physical page offset |
| * corresponding to the 32-bit pci bus offset for DEV requested by the user. |
| * |
| * Basically, the user finds the base address for his device which he wishes |
| * to mmap. They read the 32-bit value from the config space base register, |
| * add whatever PAGE_SIZE multiple offset they wish, and feed this into the |
| * offset parameter of mmap on /proc/bus/pci/XXX for that device. |
| * |
| * Returns negative error code on failure, zero on success. |
| */ |
| static int __pci_mmap_make_offset(struct pci_dev *pdev, |
| struct vm_area_struct *vma, |
| enum pci_mmap_state mmap_state) |
| { |
| unsigned long user_paddr, user_size; |
| int i, err; |
| |
| /* First compute the physical address in vma->vm_pgoff, |
| * making sure the user offset is within range in the |
| * appropriate PCI space. |
| */ |
| err = __pci_mmap_make_offset_bus(pdev, vma, mmap_state); |
| if (err) |
| return err; |
| |
| /* If this is a mapping on a host bridge, any address |
| * is OK. |
| */ |
| if ((pdev->class >> 8) == PCI_CLASS_BRIDGE_HOST) |
| return err; |
| |
| /* Otherwise make sure it's in the range for one of the |
| * device's resources. |
| */ |
| user_paddr = vma->vm_pgoff << PAGE_SHIFT; |
| user_size = vma->vm_end - vma->vm_start; |
| |
| for (i = 0; i <= PCI_ROM_RESOURCE; i++) { |
| struct resource *rp = &pdev->resource[i]; |
| resource_size_t aligned_end; |
| |
| /* Active? */ |
| if (!rp->flags) |
| continue; |
| |
| /* Same type? */ |
| if (i == PCI_ROM_RESOURCE) { |
| if (mmap_state != pci_mmap_mem) |
| continue; |
| } else { |
| if ((mmap_state == pci_mmap_io && |
| (rp->flags & IORESOURCE_IO) == 0) || |
| (mmap_state == pci_mmap_mem && |
| (rp->flags & IORESOURCE_MEM) == 0)) |
| continue; |
| } |
| |
| /* Align the resource end to the next page address. |
| * PAGE_SIZE intentionally added instead of (PAGE_SIZE - 1), |
| * because actually we need the address of the next byte |
| * after rp->end. |
| */ |
| aligned_end = (rp->end + PAGE_SIZE) & PAGE_MASK; |
| |
| if ((rp->start <= user_paddr) && |
| (user_paddr + user_size) <= aligned_end) |
| break; |
| } |
| |
| if (i > PCI_ROM_RESOURCE) |
| return -EINVAL; |
| |
| return 0; |
| } |
| |
| /* Set vm_page_prot of VMA, as appropriate for this architecture, for a pci |
| * device mapping. |
| */ |
| static void __pci_mmap_set_pgprot(struct pci_dev *dev, struct vm_area_struct *vma, |
| enum pci_mmap_state mmap_state) |
| { |
| /* Our io_remap_pfn_range takes care of this, do nothing. */ |
| } |
| |
| /* Perform the actual remap of the pages for a PCI device mapping, as appropriate |
| * for this architecture. The region in the process to map is described by vm_start |
| * and vm_end members of VMA, the base physical address is found in vm_pgoff. |
| * The pci device structure is provided so that architectures may make mapping |
| * decisions on a per-device or per-bus basis. |
| * |
| * Returns a negative error code on failure, zero on success. |
| */ |
| int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma, |
| enum pci_mmap_state mmap_state, |
| int write_combine) |
| { |
| int ret; |
| |
| ret = __pci_mmap_make_offset(dev, vma, mmap_state); |
| if (ret < 0) |
| return ret; |
| |
| __pci_mmap_set_pgprot(dev, vma, mmap_state); |
| |
| vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot); |
| ret = io_remap_pfn_range(vma, vma->vm_start, |
| vma->vm_pgoff, |
| vma->vm_end - vma->vm_start, |
| vma->vm_page_prot); |
| if (ret) |
| return ret; |
| |
| return 0; |
| } |
| |
| #ifdef CONFIG_NUMA |
| int pcibus_to_node(struct pci_bus *pbus) |
| { |
| struct pci_pbm_info *pbm = pbus->sysdata; |
| |
| return pbm->numa_node; |
| } |
| EXPORT_SYMBOL(pcibus_to_node); |
| #endif |
| |
| /* Return the domain number for this pci bus */ |
| |
| int pci_domain_nr(struct pci_bus *pbus) |
| { |
| struct pci_pbm_info *pbm = pbus->sysdata; |
| int ret; |
| |
| if (!pbm) { |
| ret = -ENXIO; |
| } else { |
| ret = pbm->index; |
| } |
| |
| return ret; |
| } |
| EXPORT_SYMBOL(pci_domain_nr); |
| |
| #ifdef CONFIG_PCI_MSI |
| int arch_setup_msi_irq(struct pci_dev *pdev, struct msi_desc *desc) |
| { |
| struct pci_pbm_info *pbm = pdev->dev.archdata.host_controller; |
| unsigned int irq; |
| |
| if (!pbm->setup_msi_irq) |
| return -EINVAL; |
| |
| return pbm->setup_msi_irq(&irq, pdev, desc); |
| } |
| |
| void arch_teardown_msi_irq(unsigned int irq) |
| { |
| struct msi_desc *entry = irq_get_msi_desc(irq); |
| struct pci_dev *pdev = entry->dev; |
| struct pci_pbm_info *pbm = pdev->dev.archdata.host_controller; |
| |
| if (pbm->teardown_msi_irq) |
| pbm->teardown_msi_irq(irq, pdev); |
| } |
| #endif /* !(CONFIG_PCI_MSI) */ |
| |
| static void ali_sound_dma_hack(struct pci_dev *pdev, int set_bit) |
| { |
| struct pci_dev *ali_isa_bridge; |
| u8 val; |
| |
| /* ALI sound chips generate 31-bits of DMA, a special register |
| * determines what bit 31 is emitted as. |
| */ |
| ali_isa_bridge = pci_get_device(PCI_VENDOR_ID_AL, |
| PCI_DEVICE_ID_AL_M1533, |
| NULL); |
| |
| pci_read_config_byte(ali_isa_bridge, 0x7e, &val); |
| if (set_bit) |
| val |= 0x01; |
| else |
| val &= ~0x01; |
| pci_write_config_byte(ali_isa_bridge, 0x7e, val); |
| pci_dev_put(ali_isa_bridge); |
| } |
| |
| int pci64_dma_supported(struct pci_dev *pdev, u64 device_mask) |
| { |
| u64 dma_addr_mask; |
| |
| if (pdev == NULL) { |
| dma_addr_mask = 0xffffffff; |
| } else { |
| struct iommu *iommu = pdev->dev.archdata.iommu; |
| |
| dma_addr_mask = iommu->dma_addr_mask; |
| |
| if (pdev->vendor == PCI_VENDOR_ID_AL && |
| pdev->device == PCI_DEVICE_ID_AL_M5451 && |
| device_mask == 0x7fffffff) { |
| ali_sound_dma_hack(pdev, |
| (dma_addr_mask & 0x80000000) != 0); |
| return 1; |
| } |
| } |
| |
| if (device_mask >= (1UL << 32UL)) |
| return 0; |
| |
| return (device_mask & dma_addr_mask) == dma_addr_mask; |
| } |
| |
| void pci_resource_to_user(const struct pci_dev *pdev, int bar, |
| const struct resource *rp, resource_size_t *start, |
| resource_size_t *end) |
| { |
| struct pci_pbm_info *pbm = pdev->dev.archdata.host_controller; |
| unsigned long offset; |
| |
| if (rp->flags & IORESOURCE_IO) |
| offset = pbm->io_space.start; |
| else |
| offset = pbm->mem_space.start; |
| |
| *start = rp->start - offset; |
| *end = rp->end - offset; |
| } |
| |
| void pcibios_set_master(struct pci_dev *dev) |
| { |
| /* No special bus mastering setup handling */ |
| } |
| |
| static int __init pcibios_init(void) |
| { |
| pci_dfl_cache_line_size = 64 >> 2; |
| return 0; |
| } |
| subsys_initcall(pcibios_init); |
| |
| #ifdef CONFIG_SYSFS |
| static void pci_bus_slot_names(struct device_node *node, struct pci_bus *bus) |
| { |
| const struct pci_slot_names { |
| u32 slot_mask; |
| char names[0]; |
| } *prop; |
| const char *sp; |
| int len, i; |
| u32 mask; |
| |
| prop = of_get_property(node, "slot-names", &len); |
| if (!prop) |
| return; |
| |
| mask = prop->slot_mask; |
| sp = prop->names; |
| |
| if (ofpci_verbose) |
| printk("PCI: Making slots for [%s] mask[0x%02x]\n", |
| node->full_name, mask); |
| |
| i = 0; |
| while (mask) { |
| struct pci_slot *pci_slot; |
| u32 this_bit = 1 << i; |
| |
| if (!(mask & this_bit)) { |
| i++; |
| continue; |
| } |
| |
| if (ofpci_verbose) |
| printk("PCI: Making slot [%s]\n", sp); |
| |
| pci_slot = pci_create_slot(bus, i, sp, NULL); |
| if (IS_ERR(pci_slot)) |
| printk(KERN_ERR "PCI: pci_create_slot returned %ld\n", |
| PTR_ERR(pci_slot)); |
| |
| sp += strlen(sp) + 1; |
| mask &= ~this_bit; |
| i++; |
| } |
| } |
| |
| static int __init of_pci_slot_init(void) |
| { |
| struct pci_bus *pbus = NULL; |
| |
| while ((pbus = pci_find_next_bus(pbus)) != NULL) { |
| struct device_node *node; |
| |
| if (pbus->self) { |
| /* PCI->PCI bridge */ |
| node = pbus->self->dev.of_node; |
| } else { |
| struct pci_pbm_info *pbm = pbus->sysdata; |
| |
| /* Host PCI controller */ |
| node = pbm->op->dev.of_node; |
| } |
| |
| pci_bus_slot_names(node, pbus); |
| } |
| |
| return 0; |
| } |
| device_initcall(of_pci_slot_init); |
| #endif |