s3c2410fb: source code improvements
This patch:
- moves more display mode preparations to s3c2410fb_check_var()
- reduces number of fields in s3c2410fb_info
- removes redundant values setting in s3c2410fb_probe()
- removes static mach_info pointer
- releases fb_info structure in s3c2410fb_remove()
- changes s3c2410fb_init to __init from __devinit
- fixes few typos in comments and removes unused includes
Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
diff --git a/drivers/video/s3c2410fb.c b/drivers/video/s3c2410fb.c
index 2ecf771..09d1963 100644
--- a/drivers/video/s3c2410fb.c
+++ b/drivers/video/s3c2410fb.c
@@ -20,7 +20,7 @@
*
* 2004-12-04: Arnaud Patard <arnaud.patard@rtp-net.org>
* - Added the possibility to set on or off the
- * debugging mesaages
+ * debugging messages
* - Replaced 0 and 1 by on or off when reading the
* /sys files
*
@@ -31,7 +31,7 @@
* - add pixel clock divisor control
*
* 2004-11-11: Arnaud Patard <arnaud.patard@rtp-net.org>
- * - Removed the use of currcon as it no more exist
+ * - Removed the use of currcon as it no more exists
* - Added LCD power sysfs interface
*
* 2004-11-03: Ben Dooks <ben-linux@fluff.org>
@@ -82,13 +82,10 @@
#include <linux/init.h>
#include <linux/dma-mapping.h>
#include <linux/interrupt.h>
-#include <linux/workqueue.h>
-#include <linux/wait.h>
#include <linux/platform_device.h>
#include <linux/clk.h>
#include <asm/io.h>
-#include <asm/uaccess.h>
#include <asm/div64.h>
#include <asm/mach/map.h>
@@ -102,8 +99,6 @@
#include "s3c2410fb.h"
-static struct s3c2410fb_mach_info *mach_info;
-
/* Debugging stuff */
#ifdef CONFIG_FB_S3C2410_DEBUG
static int debug = 1;
@@ -122,17 +117,16 @@
static void s3c2410fb_set_lcdaddr(struct fb_info *info)
{
unsigned long saddr1, saddr2, saddr3;
- int line_length = info->var.xres * info->var.bits_per_pixel;
struct s3c2410fb_info *fbi = info->par;
void __iomem *regs = fbi->io;
saddr1 = info->fix.smem_start >> 1;
saddr2 = info->fix.smem_start;
- saddr2 += (line_length * info->var.yres) / 8;
+ saddr2 += info->fix.line_length * info->var.yres;
saddr2 >>= 1;
saddr3 = S3C2410_OFFSIZE(0) |
- S3C2410_PAGEWIDTH((line_length / 16) & 0x3ff);
+ S3C2410_PAGEWIDTH((info->fix.line_length / 2) & 0x3ff);
dprintk("LCDSADDR1 = 0x%08lx\n", saddr1);
dprintk("LCDSADDR2 = 0x%08lx\n", saddr2);
@@ -153,14 +147,14 @@
unsigned long clk = clk_get_rate(fbi->clk);
unsigned long long div;
- /* pixclk is in picoseoncds, our clock is in Hz
+ /* pixclk is in picoseconds, our clock is in Hz
*
* Hz -> picoseconds is / 10^-12
*/
div = (unsigned long long)clk * pixclk;
- do_div(div, 1000000UL);
- do_div(div, 1000000UL);
+ div >>= 12; /* div / 2^12 */
+ do_div(div, 625 * 625UL * 625); /* div / 5^12 */
dprintk("pixclk %ld, divisor is %ld\n", pixclk, (long)div);
return div;
@@ -176,7 +170,7 @@
struct fb_info *info)
{
struct s3c2410fb_info *fbi = info->par;
- struct s3c2410fb_mach_info *mach_info = fbi->mach_info;
+ struct s3c2410fb_mach_info *mach_info = fbi->dev->platform_data;
struct s3c2410fb_display *display = NULL;
unsigned i;
@@ -189,7 +183,6 @@
var->xres == mach_info->displays[i].xres &&
var->bits_per_pixel == mach_info->displays[i].bpp) {
display = mach_info->displays + i;
- fbi->current_display = i;
break;
}
@@ -202,10 +195,22 @@
/* it is always the size as the display */
var->xres_virtual = display->xres;
var->yres_virtual = display->yres;
+ var->height = display->height;
+ var->width = display->width;
/* copy lcd settings */
var->left_margin = display->left_margin;
var->right_margin = display->right_margin;
+ var->upper_margin = display->upper_margin;
+ var->lower_margin = display->lower_margin;
+ var->vsync_len = display->vsync_len;
+ var->hsync_len = display->hsync_len;
+
+ fbi->regs.lcdcon1 = display->lcdcon1;
+ fbi->regs.lcdcon5 = display->lcdcon5;
+ /* set display type */
+ fbi->regs.lcdcon1 &= ~S3C2410_LCDCON1_TFT;
+ fbi->regs.lcdcon1 |= display->type;
var->transp.offset = 0;
var->transp.length = 0;
@@ -420,19 +425,13 @@
{
struct s3c2410fb_info *fbi = info->par;
void __iomem *regs = fbi->io;
+ int type = fbi->regs.lcdcon1 & S3C2410_LCDCON1_TFT;
struct fb_var_screeninfo *var = &info->var;
- struct s3c2410fb_mach_info *mach_info = fbi->mach_info;
- struct s3c2410fb_display *display = mach_info->displays +
- fbi->current_display;
-
- /* set display type */
- fbi->regs.lcdcon1 &= ~S3C2410_LCDCON1_TFT;
- fbi->regs.lcdcon1 |= display->type;
if (var->pixclock > 0) {
int clkdiv = s3c2410fb_calc_pixclk(fbi, var->pixclock);
- if (display->type == S3C2410_LCDCON1_TFT) {
+ if (type == S3C2410_LCDCON1_TFT) {
clkdiv = (clkdiv / 2) - 1;
if (clkdiv < 0)
clkdiv = 0;
@@ -446,7 +445,7 @@
fbi->regs.lcdcon1 |= S3C2410_LCDCON1_CLKVAL(clkdiv);
}
- if (display->type == S3C2410_LCDCON1_TFT)
+ if (type == S3C2410_LCDCON1_TFT)
s3c2410fb_calculate_tft_lcd_regs(info, &fbi->regs);
else
s3c2410fb_calculate_stn_lcd_regs(info, &fbi->regs);
@@ -470,6 +469,7 @@
/* set lcd address pointers */
s3c2410fb_set_lcdaddr(info);
+ fbi->regs.lcdcon1 |= S3C2410_LCDCON1_ENVID,
writel(fbi->regs.lcdcon1, regs + S3C2410_LCDCON1);
}
@@ -566,9 +566,9 @@
if (regno < 256) {
/* currently assume RGB 5-6-5 mode */
- val = ((red >> 0) & 0xf800);
- val |= ((green >> 5) & 0x07e0);
- val |= ((blue >> 11) & 0x001f);
+ val = (red >> 0) & 0xf800;
+ val |= (green >> 5) & 0x07e0;
+ val |= (blue >> 11) & 0x001f;
writel(val, regs + S3C2410_TFTPAL(regno));
schedule_palette_update(fbi, regno, val);
@@ -606,9 +606,6 @@
dprintk("blank(mode=%d, info=%p)\n", blank_mode, info);
- if (mach_info == NULL)
- return -EINVAL;
-
if (blank_mode == FB_BLANK_UNBLANK)
writel(0x0, regs + S3C2410_TPAL);
else {
@@ -624,13 +621,11 @@
{
return snprintf(buf, PAGE_SIZE, "%s\n", debug ? "on" : "off");
}
+
static int s3c2410fb_debug_store(struct device *dev,
struct device_attribute *attr,
const char *buf, size_t len)
{
- if (mach_info == NULL)
- return -EINVAL;
-
if (len < 1)
return -EINVAL;
@@ -673,36 +668,35 @@
static int __init s3c2410fb_map_video_memory(struct fb_info *info)
{
struct s3c2410fb_info *fbi = info->par;
+ dma_addr_t map_dma;
+ unsigned map_size = PAGE_ALIGN(info->fix.smem_len);
dprintk("map_video_memory(fbi=%p)\n", fbi);
- fbi->map_size = PAGE_ALIGN(info->fix.smem_len + PAGE_SIZE);
- fbi->map_cpu = dma_alloc_writecombine(fbi->dev, fbi->map_size,
- &fbi->map_dma, GFP_KERNEL);
+ info->screen_base = dma_alloc_writecombine(fbi->dev, map_size,
+ &map_dma, GFP_KERNEL);
- fbi->map_size = info->fix.smem_len;
-
- if (fbi->map_cpu) {
+ if (info->screen_base) {
/* prevent initial garbage on screen */
dprintk("map_video_memory: clear %p:%08x\n",
- fbi->map_cpu, fbi->map_size);
- memset(fbi->map_cpu, 0xf0, fbi->map_size);
+ info->screen_base, map_size);
+ memset(info->screen_base, 0xf0, map_size);
- fbi->screen_dma = fbi->map_dma;
- info->screen_base = fbi->map_cpu;
- info->fix.smem_start = fbi->screen_dma;
+ info->fix.smem_start = map_dma;
- dprintk("map_video_memory: dma=%08x cpu=%p size=%08x\n",
- fbi->map_dma, fbi->map_cpu, info->fix.smem_len);
+ dprintk("map_video_memory: dma=%08lx cpu=%p size=%08x\n",
+ info->fix.smem_start, info->screen_base, map_size);
}
- return fbi->map_cpu ? 0 : -ENOMEM;
+ return info->screen_base ? 0 : -ENOMEM;
}
-static inline void s3c2410fb_unmap_video_memory(struct s3c2410fb_info *fbi)
+static inline void s3c2410fb_unmap_video_memory(struct fb_info *info)
{
- dma_free_writecombine(fbi->dev, fbi->map_size, fbi->map_cpu,
- fbi->map_dma);
+ struct s3c2410fb_info *fbi = info->par;
+
+ dma_free_writecombine(fbi->dev, PAGE_ALIGN(info->fix.smem_len),
+ info->screen_base, info->fix.smem_start);
}
static inline void modify_gpio(void __iomem *reg,
@@ -720,6 +714,7 @@
static int s3c2410fb_init_registers(struct fb_info *info)
{
struct s3c2410fb_info *fbi = info->par;
+ struct s3c2410fb_mach_info *mach_info = fbi->dev->platform_data;
unsigned long flags;
void __iomem *regs = fbi->io;
@@ -736,14 +731,6 @@
local_irq_restore(flags);
- writel(fbi->regs.lcdcon1, regs + S3C2410_LCDCON1);
- writel(fbi->regs.lcdcon2, regs + S3C2410_LCDCON2);
- writel(fbi->regs.lcdcon3, regs + S3C2410_LCDCON3);
- writel(fbi->regs.lcdcon4, regs + S3C2410_LCDCON4);
- writel(fbi->regs.lcdcon5, regs + S3C2410_LCDCON5);
-
- s3c2410fb_set_lcdaddr(info);
-
dprintk("LPCSEL = 0x%08lx\n", mach_info->lpcsel);
writel(mach_info->lpcsel, regs + S3C2410_LPCSEL);
@@ -752,9 +739,6 @@
/* ensure temporary palette disabled */
writel(0x00, regs + S3C2410_TPAL);
- /* Enable video by setting the ENVID bit to 1 */
- fbi->regs.lcdcon1 |= S3C2410_LCDCON1_ENVID;
- writel(fbi->regs.lcdcon1, regs + S3C2410_LCDCON1);
return 0;
}
@@ -808,6 +792,7 @@
struct s3c2410fb_info *info;
struct s3c2410fb_display *display;
struct fb_info *fbinfo;
+ struct s3c2410fb_mach_info *mach_info;
struct resource *res;
int ret;
int irq;
@@ -834,6 +819,8 @@
if (!fbinfo)
return -ENOMEM;
+ platform_set_drvdata(pdev, fbinfo);
+
info = fbinfo->par;
info->dev = &pdev->dev;
@@ -859,23 +846,14 @@
goto release_mem;
}
- platform_set_drvdata(pdev, fbinfo);
-
dprintk("devinit\n");
strcpy(fbinfo->fix.id, driver_name);
- info->regs.lcdcon1 = display->lcdcon1;
- info->regs.lcdcon5 = display->lcdcon5;
-
- /* Stop the video and unset ENVID if set */
- info->regs.lcdcon1 &= ~S3C2410_LCDCON1_ENVID;
+ /* Stop the video */
lcdcon1 = readl(info->io + S3C2410_LCDCON1);
writel(lcdcon1 & ~S3C2410_LCDCON1_ENVID, info->io + S3C2410_LCDCON1);
- info->mach_info = pdev->dev.platform_data;
- info->current_display = mach_info->default_display;
-
fbinfo->fix.type = FB_TYPE_PACKED_PIXELS;
fbinfo->fix.type_aux = 0;
fbinfo->fix.xpanstep = 0;
@@ -885,8 +863,6 @@
fbinfo->var.nonstd = 0;
fbinfo->var.activate = FB_ACTIVATE_NOW;
- fbinfo->var.height = display->height;
- fbinfo->var.width = display->width;
fbinfo->var.accel_flags = 0;
fbinfo->var.vmode = FB_VMODE_NONINTERLACED;
@@ -894,39 +870,6 @@
fbinfo->flags = FBINFO_FLAG_DEFAULT;
fbinfo->pseudo_palette = &info->pseudo_pal;
- fbinfo->var.xres = display->xres;
- fbinfo->var.xres_virtual = display->xres;
- fbinfo->var.yres = display->yres;
- fbinfo->var.yres_virtual = display->yres;
- fbinfo->var.bits_per_pixel = display->bpp;
- fbinfo->var.left_margin = display->left_margin;
- fbinfo->var.right_margin = display->right_margin;
-
- fbinfo->var.upper_margin = display->upper_margin;
- fbinfo->var.lower_margin = display->lower_margin;
- fbinfo->var.vsync_len = display->vsync_len;
- fbinfo->var.hsync_len = display->hsync_len;
-
- fbinfo->var.red.offset = 11;
- fbinfo->var.green.offset = 5;
- fbinfo->var.blue.offset = 0;
- fbinfo->var.transp.offset = 0;
- fbinfo->var.red.length = 5;
- fbinfo->var.green.length = 6;
- fbinfo->var.blue.length = 5;
- fbinfo->var.transp.length = 0;
-
- /* find maximum required memory size for display */
- for (i = 0; i < mach_info->num_displays; i++) {
- unsigned long smem_len = mach_info->displays[i].xres;
-
- smem_len *= mach_info->displays[i].yres;
- smem_len *= mach_info->displays[i].bpp;
- smem_len >>= 3;
- if (fbinfo->fix.smem_len < smem_len)
- fbinfo->fix.smem_len = smem_len;
- }
-
for (i = 0; i < 256; i++)
info->palette_buffer[i] = PALETTE_BUFF_CLEAR;
@@ -949,6 +892,17 @@
msleep(1);
+ /* find maximum required memory size for display */
+ for (i = 0; i < mach_info->num_displays; i++) {
+ unsigned long smem_len = mach_info->displays[i].xres;
+
+ smem_len *= mach_info->displays[i].yres;
+ smem_len *= mach_info->displays[i].bpp;
+ smem_len >>= 3;
+ if (fbinfo->fix.smem_len < smem_len)
+ fbinfo->fix.smem_len = smem_len;
+ }
+
/* Initialize video memory */
ret = s3c2410fb_map_video_memory(fbinfo);
if (ret) {
@@ -959,6 +913,10 @@
dprintk("got video memory\n");
+ fbinfo->var.xres = display->xres;
+ fbinfo->var.yres = display->yres;
+ fbinfo->var.bits_per_pixel = display->bpp;
+
s3c2410fb_init_registers(fbinfo);
s3c2410fb_check_var(&fbinfo->var, fbinfo);
@@ -979,7 +937,7 @@
return 0;
free_video_memory:
- s3c2410fb_unmap_video_memory(info);
+ s3c2410fb_unmap_video_memory(fbinfo);
release_clock:
clk_disable(info->clk);
clk_put(info->clk);
@@ -991,6 +949,7 @@
release_resource(info->mem);
kfree(info->mem);
dealloc_fb:
+ platform_set_drvdata(pdev, NULL);
framebuffer_release(fbinfo);
return ret;
}
@@ -1020,10 +979,12 @@
struct s3c2410fb_info *info = fbinfo->par;
int irq;
+ unregister_framebuffer(fbinfo);
+
s3c2410fb_stop_lcd(info);
msleep(1);
- s3c2410fb_unmap_video_memory(info);
+ s3c2410fb_unmap_video_memory(fbinfo);
if (info->clk) {
clk_disable(info->clk);
@@ -1034,10 +995,13 @@
irq = platform_get_irq(pdev, 0);
free_irq(irq, info);
+ iounmap(info->io);
+
release_resource(info->mem);
kfree(info->mem);
- iounmap(info->io);
- unregister_framebuffer(fbinfo);
+
+ platform_set_drvdata(pdev, NULL);
+ framebuffer_release(fbinfo);
return 0;
}
@@ -1091,7 +1055,7 @@
},
};
-int __devinit s3c2410fb_init(void)
+int __init s3c2410fb_init(void)
{
return platform_driver_register(&s3c2410fb_driver);
}
diff --git a/drivers/video/s3c2410fb.h b/drivers/video/s3c2410fb.h
index 9e86fff..6ce5dc2 100644
--- a/drivers/video/s3c2410fb.h
+++ b/drivers/video/s3c2410fb.h
@@ -16,7 +16,7 @@
*
* 2004-09-07: Arnaud Patard <arnaud.patard@rtp-net.org>
* - Renamed from h1940fb.h to s3c2410fb.h
- * - Chenged h1940 to s3c2410
+ * - Changed h1940 to s3c2410
*
* 2004-07-15: Arnaud Patard <arnaud.patard@rtp-net.org>
* - First version
@@ -32,20 +32,8 @@
struct resource *mem;
void __iomem *io;
- struct s3c2410fb_mach_info *mach_info;
-
- unsigned current_display;
-
- /* raw memory addresses */
- dma_addr_t map_dma; /* physical */
- u_char * map_cpu; /* virtual */
- u_int map_size;
-
struct s3c2410fb_hw regs;
- /* addresses of pieces placed in raw buffer */
- u_char * screen_cpu; /* virtual address of buffer */
- dma_addr_t screen_dma; /* physical address of buffer */
unsigned int palette_ready;
/* keep these registers in case we need to re-write palette */