mtd: common module for smartmedia/xD support
This small module implements few helpers that are usefull
for nand drivers for SmartMedia/xD card readers.
Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
diff --git a/drivers/mtd/nand/sm_common.c b/drivers/mtd/nand/sm_common.c
new file mode 100644
index 0000000..07b6f72
--- /dev/null
+++ b/drivers/mtd/nand/sm_common.c
@@ -0,0 +1,107 @@
+/*
+ * Copyright © 2009 - Maxim Levitsky
+ * Common routines & support for xD format
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/kernel.h>
+#include <linux/mtd/nand.h>
+#include "sm_common.h"
+
+static struct nand_ecclayout nand_oob_sm = {
+ .eccbytes = 6,
+ .eccpos = {8, 9, 10, 13, 14, 15},
+ .oobfree = {
+ {.offset = 0 , .length = 4}, /* reserved */
+ {.offset = 6 , .length = 2}, /* LBA1 */
+ {.offset = 11, .length = 2} /* LBA2 */
+ }
+};
+
+/* NOTE: This layout is is not compatabable with SmartMedia, */
+/* because the 256 byte devices have page depenent oob layout */
+/* However it does preserve the bad block markers */
+/* If you use smftl, it will bypass this and work correctly */
+/* If you not, then you break SmartMedia compliance anyway */
+
+static struct nand_ecclayout nand_oob_sm_small = {
+ .eccbytes = 3,
+ .eccpos = {0, 1, 2},
+ .oobfree = {
+ {.offset = 3 , .length = 2}, /* reserved */
+ {.offset = 6 , .length = 2}, /* LBA1 */
+ }
+};
+
+
+static int sm_block_markbad(struct mtd_info *mtd, loff_t ofs)
+{
+ struct mtd_oob_ops ops;
+ struct sm_oob oob;
+ int ret, error = 0;
+
+ memset(&oob, -1, SM_OOB_SIZE);
+ oob.block_status = 0x0F;
+
+ /* As long as this function is called on erase block boundaries
+ it will work correctly for 256 byte nand */
+ ops.mode = MTD_OOB_PLACE;
+ ops.ooboffs = 0;
+ ops.ooblen = mtd->oobsize;
+ ops.oobbuf = (void *)&oob;
+ ops.datbuf = NULL;
+
+
+ ret = mtd->write_oob(mtd, ofs, &ops);
+ if (ret < 0 || ops.oobretlen != SM_OOB_SIZE) {
+ printk(KERN_NOTICE
+ "sm_common: can't mark sector at %i as bad\n",
+ (int)ofs);
+ error = -EIO;
+ } else
+ mtd->ecc_stats.badblocks++;
+
+ return error;
+}
+
+
+int sm_register_device(struct mtd_info *mtd)
+{
+ struct nand_chip *chip = (struct nand_chip *)mtd->priv;
+ int ret;
+
+ chip->options |= NAND_SKIP_BBTSCAN | NAND_SMARTMEDIA;
+
+ /* Scan for card properties */
+ ret = nand_scan_ident(mtd, 1);
+
+ if (ret)
+ return ret;
+
+ /* Bad block marker postion */
+ chip->badblockpos = 0x05;
+ chip->badblockbits = 7;
+ chip->block_markbad = sm_block_markbad;
+
+ /* ECC layout */
+ if (mtd->writesize == SM_SECTOR_SIZE)
+ chip->ecc.layout = &nand_oob_sm;
+ else if (mtd->writesize == SM_SMALL_PAGE)
+ chip->ecc.layout = &nand_oob_sm_small;
+ else
+ return -ENODEV;
+
+ ret = nand_scan_tail(mtd);
+
+ if (ret)
+ return ret;
+
+ return add_mtd_device(mtd);
+}
+EXPORT_SYMBOL_GPL(sm_register_device);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Maxim Levitsky <maximlevitsky@gmail.com>");
+MODULE_DESCRIPTION("Common SmartMedia/xD functions");