sparc: copy sparc64 specific files to asm-sparc
Used the following script to copy the files:
cd include
set -e
SPARC64=`ls asm-sparc64`
for FILE in ${SPARC64}; do
if [ -f asm-sparc/$FILE ]; then
echo $FILE exist in asm-sparc
else
git mv asm-sparc64/$FILE asm-sparc/$FILE
printf "#include <asm-sparc/$FILE>\n" > asm-sparc64/$FILE
git add asm-sparc64/$FILE
fi
done
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
diff --git a/include/asm-sparc/ns87303.h b/include/asm-sparc/ns87303.h
new file mode 100644
index 0000000..686defe
--- /dev/null
+++ b/include/asm-sparc/ns87303.h
@@ -0,0 +1,118 @@
+/* ns87303.h: Configuration Register Description for the
+ * National Semiconductor PC87303 (SuperIO).
+ *
+ * Copyright (C) 1997 Eddie C. Dost (ecd@skynet.be)
+ */
+
+#ifndef _SPARC_NS87303_H
+#define _SPARC_NS87303_H 1
+
+/*
+ * Control Register Index Values
+ */
+#define FER 0x00
+#define FAR 0x01
+#define PTR 0x02
+#define FCR 0x03
+#define PCR 0x04
+#define KRR 0x05
+#define PMC 0x06
+#define TUP 0x07
+#define SID 0x08
+#define ASC 0x09
+#define CS0CF0 0x0a
+#define CS0CF1 0x0b
+#define CS1CF0 0x0c
+#define CS1CF1 0x0d
+
+/* Function Enable Register (FER) bits */
+#define FER_EDM 0x10 /* Encoded Drive and Motor pin information */
+
+/* Function Address Register (FAR) bits */
+#define FAR_LPT_MASK 0x03
+#define FAR_LPTB 0x00
+#define FAR_LPTA 0x01
+#define FAR_LPTC 0x02
+
+/* Power and Test Register (PTR) bits */
+#define PTR_LPTB_IRQ7 0x08
+#define PTR_LEVEL_IRQ 0x80 /* When not ECP/EPP: Use level IRQ */
+#define PTR_LPT_REG_DIR 0x80 /* When ECP/EPP: LPT CTR controlls direction */
+ /* of the parallel port */
+
+/* Function Control Register (FCR) bits */
+#define FCR_LDE 0x10 /* Logical Drive Exchange */
+#define FCR_ZWS_ENA 0x20 /* Enable short host read/write in ECP/EPP */
+
+/* Printer Control Register (PCR) bits */
+#define PCR_EPP_ENABLE 0x01
+#define PCR_EPP_IEEE 0x02 /* Enable EPP Version 1.9 (IEEE 1284) */
+#define PCR_ECP_ENABLE 0x04
+#define PCR_ECP_CLK_ENA 0x08 /* If 0 ECP Clock is stopped on Power down */
+#define PCR_IRQ_POLAR 0x20 /* If 0 IRQ is level high or negative pulse, */
+ /* if 1 polarity is inverted */
+#define PCR_IRQ_ODRAIN 0x40 /* If 1, IRQ is open drain */
+
+/* Tape UARTs and Parallel Port Config Register (TUP) bits */
+#define TUP_EPP_TIMO 0x02 /* Enable EPP timeout IRQ */
+
+/* Advanced SuperIO Config Register (ASC) bits */
+#define ASC_LPT_IRQ7 0x01 /* Always use IRQ7 for LPT */
+#define ASC_DRV2_SEL 0x02 /* Logical Drive Exchange controlled by TDR */
+
+#define FER_RESERVED 0x00
+#define FAR_RESERVED 0x00
+#define PTR_RESERVED 0x73
+#define FCR_RESERVED 0xc4
+#define PCR_RESERVED 0x10
+#define KRR_RESERVED 0x00
+#define PMC_RESERVED 0x98
+#define TUP_RESERVED 0xfb
+#define SIP_RESERVED 0x00
+#define ASC_RESERVED 0x18
+#define CS0CF0_RESERVED 0x00
+#define CS0CF1_RESERVED 0x08
+#define CS1CF0_RESERVED 0x00
+#define CS1CF1_RESERVED 0x08
+
+#ifdef __KERNEL__
+
+#include <linux/spinlock.h>
+
+#include <asm/system.h>
+#include <asm/io.h>
+
+extern spinlock_t ns87303_lock;
+
+static inline int ns87303_modify(unsigned long port, unsigned int index,
+ unsigned char clr, unsigned char set)
+{
+ static unsigned char reserved[] = {
+ FER_RESERVED, FAR_RESERVED, PTR_RESERVED, FCR_RESERVED,
+ PCR_RESERVED, KRR_RESERVED, PMC_RESERVED, TUP_RESERVED,
+ SIP_RESERVED, ASC_RESERVED, CS0CF0_RESERVED, CS0CF1_RESERVED,
+ CS1CF0_RESERVED, CS1CF1_RESERVED
+ };
+ unsigned long flags;
+ unsigned char value;
+
+ if (index > 0x0d)
+ return -EINVAL;
+
+ spin_lock_irqsave(&ns87303_lock, flags);
+
+ outb(index, port);
+ value = inb(port + 1);
+ value &= ~(reserved[index] | clr);
+ value |= set;
+ outb(value, port + 1);
+ outb(value, port + 1);
+
+ spin_unlock_irqrestore(&ns87303_lock, flags);
+
+ return 0;
+}
+
+#endif /* __KERNEL__ */
+
+#endif /* !(_SPARC_NS87303_H) */