drm/i915: Simplify PSR debugfs
for igt test case.
v2: remove trailing spaces and fix conflicts
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@gmail.com>
[danvet:
- make it comipile
- s/IS_HASWELL/HAS_PSR/]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
diff --git a/drivers/gpu/drm/i915/i915_debugfs.c b/drivers/gpu/drm/i915/i915_debugfs.c
index bc5c04d..61fd619 100644
--- a/drivers/gpu/drm/i915/i915_debugfs.c
+++ b/drivers/gpu/drm/i915/i915_debugfs.c
@@ -1666,127 +1666,20 @@
struct drm_info_node *node = m->private;
struct drm_device *dev = node->minor->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
- u32 psrstat, psrperf;
+ u32 psrperf = 0;
+ bool enabled = false;
- if (!HAS_PSR(dev)) {
- seq_puts(m, "PSR not supported on this platform\n");
- } else if (HAS_PSR(dev) &&
- I915_READ(EDP_PSR_CTL(dev)) & EDP_PSR_ENABLE) {
- seq_puts(m, "PSR enabled\n");
- } else {
- seq_puts(m, "PSR disabled: ");
- switch (dev_priv->no_psr_reason) {
- case PSR_NO_SOURCE:
- seq_puts(m, "not supported on this platform");
- break;
- case PSR_NO_SINK:
- seq_puts(m, "not supported by panel");
- break;
- case PSR_MODULE_PARAM:
- seq_puts(m, "disabled by flag");
- break;
- case PSR_CRTC_NOT_ACTIVE:
- seq_puts(m, "crtc not active");
- break;
- case PSR_PWR_WELL_ENABLED:
- seq_puts(m, "power well enabled");
- break;
- case PSR_NOT_TILED:
- seq_puts(m, "not tiled");
- break;
- case PSR_SPRITE_ENABLED:
- seq_puts(m, "sprite enabled");
- break;
- case PSR_S3D_ENABLED:
- seq_puts(m, "stereo 3d enabled");
- break;
- case PSR_INTERLACED_ENABLED:
- seq_puts(m, "interlaced enabled");
- break;
- case PSR_HSW_NOT_DDIA:
- seq_puts(m, "HSW ties PSR to DDI A (eDP)");
- break;
- default:
- seq_puts(m, "unknown reason");
- }
- seq_puts(m, "\n");
- return 0;
- }
+ seq_printf(m, "Sink_Support: %s\n", yesno(dev_priv->psr.sink_support));
+ seq_printf(m, "Source_OK: %s\n", yesno(dev_priv->psr.source_ok));
- psrstat = I915_READ(EDP_PSR_STATUS_CTL(dev));
+ enabled = HAS_PSR(dev) &&
+ I915_READ(EDP_PSR_CTL(dev)) & EDP_PSR_ENABLE;
+ seq_printf(m, "Enabled: %s\n", yesno(enabled));
- seq_puts(m, "PSR Current State: ");
- switch (psrstat & EDP_PSR_STATUS_STATE_MASK) {
- case EDP_PSR_STATUS_STATE_IDLE:
- seq_puts(m, "Reset state\n");
- break;
- case EDP_PSR_STATUS_STATE_SRDONACK:
- seq_puts(m, "Wait for TG/Stream to send on frame of data after SRD conditions are met\n");
- break;
- case EDP_PSR_STATUS_STATE_SRDENT:
- seq_puts(m, "SRD entry\n");
- break;
- case EDP_PSR_STATUS_STATE_BUFOFF:
- seq_puts(m, "Wait for buffer turn off\n");
- break;
- case EDP_PSR_STATUS_STATE_BUFON:
- seq_puts(m, "Wait for buffer turn on\n");
- break;
- case EDP_PSR_STATUS_STATE_AUXACK:
- seq_puts(m, "Wait for AUX to acknowledge on SRD exit\n");
- break;
- case EDP_PSR_STATUS_STATE_SRDOFFACK:
- seq_puts(m, "Wait for TG/Stream to acknowledge the SRD VDM exit\n");
- break;
- default:
- seq_puts(m, "Unknown\n");
- break;
- }
-
- seq_puts(m, "Link Status: ");
- switch (psrstat & EDP_PSR_STATUS_LINK_MASK) {
- case EDP_PSR_STATUS_LINK_FULL_OFF:
- seq_puts(m, "Link is fully off\n");
- break;
- case EDP_PSR_STATUS_LINK_FULL_ON:
- seq_puts(m, "Link is fully on\n");
- break;
- case EDP_PSR_STATUS_LINK_STANDBY:
- seq_puts(m, "Link is in standby\n");
- break;
- default:
- seq_puts(m, "Unknown\n");
- break;
- }
-
- seq_printf(m, "PSR Entry Count: %u\n",
- psrstat >> EDP_PSR_STATUS_COUNT_SHIFT &
- EDP_PSR_STATUS_COUNT_MASK);
-
- seq_printf(m, "Max Sleep Timer Counter: %u\n",
- psrstat >> EDP_PSR_STATUS_MAX_SLEEP_TIMER_SHIFT &
- EDP_PSR_STATUS_MAX_SLEEP_TIMER_MASK);
-
- seq_printf(m, "Had AUX error: %s\n",
- yesno(psrstat & EDP_PSR_STATUS_AUX_ERROR));
-
- seq_printf(m, "Sending AUX: %s\n",
- yesno(psrstat & EDP_PSR_STATUS_AUX_SENDING));
-
- seq_printf(m, "Sending Idle: %s\n",
- yesno(psrstat & EDP_PSR_STATUS_SENDING_IDLE));
-
- seq_printf(m, "Sending TP2 TP3: %s\n",
- yesno(psrstat & EDP_PSR_STATUS_SENDING_TP2_TP3));
-
- seq_printf(m, "Sending TP1: %s\n",
- yesno(psrstat & EDP_PSR_STATUS_SENDING_TP1));
-
- seq_printf(m, "Idle Count: %u\n",
- psrstat & EDP_PSR_STATUS_IDLE_MASK);
-
- psrperf = (I915_READ(EDP_PSR_PERF_CNT(dev))) & EDP_PSR_PERF_CNT_MASK;
- seq_printf(m, "Performance Counter: %u\n", psrperf);
+ if (HAS_PSR(dev))
+ psrperf = I915_READ(EDP_PSR_PERF_CNT(dev)) &
+ EDP_PSR_PERF_CNT_MASK;
+ seq_printf(m, "Performance_Counter: %u\n", psrperf);
return 0;
}