| |
| #include <linux/kernel.h> |
| #include <linux/export.h> |
| #include <linux/ide.h> |
| |
| #if defined(CONFIG_ARM) || defined(CONFIG_M68K) || defined(CONFIG_MIPS) || \ |
| defined(CONFIG_PARISC) || defined(CONFIG_PPC) || defined(CONFIG_SPARC) |
| #include <asm/ide.h> |
| #else |
| #include <asm-generic/ide_iops.h> |
| #endif |
| |
| /* |
| * Conventional PIO operations for ATA devices |
| */ |
| |
| static u8 ide_inb(unsigned long port) |
| { |
| return (u8) inb(port); |
| } |
| |
| static void ide_outb(u8 val, unsigned long port) |
| { |
| outb(val, port); |
| } |
| |
| /* |
| * MMIO operations, typically used for SATA controllers |
| */ |
| |
| static u8 ide_mm_inb(unsigned long port) |
| { |
| return (u8) readb((void __iomem *) port); |
| } |
| |
| static void ide_mm_outb(u8 value, unsigned long port) |
| { |
| writeb(value, (void __iomem *) port); |
| } |
| |
| void ide_exec_command(ide_hwif_t *hwif, u8 cmd) |
| { |
| if (hwif->host_flags & IDE_HFLAG_MMIO) |
| writeb(cmd, (void __iomem *)hwif->io_ports.command_addr); |
| else |
| outb(cmd, hwif->io_ports.command_addr); |
| } |
| EXPORT_SYMBOL_GPL(ide_exec_command); |
| |
| u8 ide_read_status(ide_hwif_t *hwif) |
| { |
| if (hwif->host_flags & IDE_HFLAG_MMIO) |
| return readb((void __iomem *)hwif->io_ports.status_addr); |
| else |
| return inb(hwif->io_ports.status_addr); |
| } |
| EXPORT_SYMBOL_GPL(ide_read_status); |
| |
| u8 ide_read_altstatus(ide_hwif_t *hwif) |
| { |
| if (hwif->host_flags & IDE_HFLAG_MMIO) |
| return readb((void __iomem *)hwif->io_ports.ctl_addr); |
| else |
| return inb(hwif->io_ports.ctl_addr); |
| } |
| EXPORT_SYMBOL_GPL(ide_read_altstatus); |
| |
| void ide_write_devctl(ide_hwif_t *hwif, u8 ctl) |
| { |
| if (hwif->host_flags & IDE_HFLAG_MMIO) |
| writeb(ctl, (void __iomem *)hwif->io_ports.ctl_addr); |
| else |
| outb(ctl, hwif->io_ports.ctl_addr); |
| } |
| EXPORT_SYMBOL_GPL(ide_write_devctl); |
| |
| void ide_dev_select(ide_drive_t *drive) |
| { |
| ide_hwif_t *hwif = drive->hwif; |
| u8 select = drive->select | ATA_DEVICE_OBS; |
| |
| if (hwif->host_flags & IDE_HFLAG_MMIO) |
| writeb(select, (void __iomem *)hwif->io_ports.device_addr); |
| else |
| outb(select, hwif->io_ports.device_addr); |
| } |
| EXPORT_SYMBOL_GPL(ide_dev_select); |
| |
| void ide_tf_load(ide_drive_t *drive, struct ide_taskfile *tf, u8 valid) |
| { |
| ide_hwif_t *hwif = drive->hwif; |
| struct ide_io_ports *io_ports = &hwif->io_ports; |
| void (*tf_outb)(u8 addr, unsigned long port); |
| u8 mmio = (hwif->host_flags & IDE_HFLAG_MMIO) ? 1 : 0; |
| |
| if (mmio) |
| tf_outb = ide_mm_outb; |
| else |
| tf_outb = ide_outb; |
| |
| if (valid & IDE_VALID_FEATURE) |
| tf_outb(tf->feature, io_ports->feature_addr); |
| if (valid & IDE_VALID_NSECT) |
| tf_outb(tf->nsect, io_ports->nsect_addr); |
| if (valid & IDE_VALID_LBAL) |
| tf_outb(tf->lbal, io_ports->lbal_addr); |
| if (valid & IDE_VALID_LBAM) |
| tf_outb(tf->lbam, io_ports->lbam_addr); |
| if (valid & IDE_VALID_LBAH) |
| tf_outb(tf->lbah, io_ports->lbah_addr); |
| if (valid & IDE_VALID_DEVICE) |
| tf_outb(tf->device, io_ports->device_addr); |
| } |
| EXPORT_SYMBOL_GPL(ide_tf_load); |
| |
| void ide_tf_read(ide_drive_t *drive, struct ide_taskfile *tf, u8 valid) |
| { |
| ide_hwif_t *hwif = drive->hwif; |
| struct ide_io_ports *io_ports = &hwif->io_ports; |
| u8 (*tf_inb)(unsigned long port); |
| u8 mmio = (hwif->host_flags & IDE_HFLAG_MMIO) ? 1 : 0; |
| |
| if (mmio) |
| tf_inb = ide_mm_inb; |
| else |
| tf_inb = ide_inb; |
| |
| if (valid & IDE_VALID_ERROR) |
| tf->error = tf_inb(io_ports->feature_addr); |
| if (valid & IDE_VALID_NSECT) |
| tf->nsect = tf_inb(io_ports->nsect_addr); |
| if (valid & IDE_VALID_LBAL) |
| tf->lbal = tf_inb(io_ports->lbal_addr); |
| if (valid & IDE_VALID_LBAM) |
| tf->lbam = tf_inb(io_ports->lbam_addr); |
| if (valid & IDE_VALID_LBAH) |
| tf->lbah = tf_inb(io_ports->lbah_addr); |
| if (valid & IDE_VALID_DEVICE) |
| tf->device = tf_inb(io_ports->device_addr); |
| } |
| EXPORT_SYMBOL_GPL(ide_tf_read); |
| |
| /* |
| * Some localbus EIDE interfaces require a special access sequence |
| * when using 32-bit I/O instructions to transfer data. We call this |
| * the "vlb_sync" sequence, which consists of three successive reads |
| * of the sector count register location, with interrupts disabled |
| * to ensure that the reads all happen together. |
| */ |
| static void ata_vlb_sync(unsigned long port) |
| { |
| (void)inb(port); |
| (void)inb(port); |
| (void)inb(port); |
| } |
| |
| /* |
| * This is used for most PIO data transfers *from* the IDE interface |
| * |
| * These routines will round up any request for an odd number of bytes, |
| * so if an odd len is specified, be sure that there's at least one |
| * extra byte allocated for the buffer. |
| */ |
| void ide_input_data(ide_drive_t *drive, struct ide_cmd *cmd, void *buf, |
| unsigned int len) |
| { |
| ide_hwif_t *hwif = drive->hwif; |
| struct ide_io_ports *io_ports = &hwif->io_ports; |
| unsigned long data_addr = io_ports->data_addr; |
| unsigned int words = (len + 1) >> 1; |
| u8 io_32bit = drive->io_32bit; |
| u8 mmio = (hwif->host_flags & IDE_HFLAG_MMIO) ? 1 : 0; |
| |
| if (io_32bit) { |
| unsigned long uninitialized_var(flags); |
| |
| if ((io_32bit & 2) && !mmio) { |
| local_irq_save(flags); |
| ata_vlb_sync(io_ports->nsect_addr); |
| } |
| |
| words >>= 1; |
| if (mmio) |
| __ide_mm_insl((void __iomem *)data_addr, buf, words); |
| else |
| insl(data_addr, buf, words); |
| |
| if ((io_32bit & 2) && !mmio) |
| local_irq_restore(flags); |
| |
| if (((len + 1) & 3) < 2) |
| return; |
| |
| buf += len & ~3; |
| words = 1; |
| } |
| |
| if (mmio) |
| __ide_mm_insw((void __iomem *)data_addr, buf, words); |
| else |
| insw(data_addr, buf, words); |
| } |
| EXPORT_SYMBOL_GPL(ide_input_data); |
| |
| /* |
| * This is used for most PIO data transfers *to* the IDE interface |
| */ |
| void ide_output_data(ide_drive_t *drive, struct ide_cmd *cmd, void *buf, |
| unsigned int len) |
| { |
| ide_hwif_t *hwif = drive->hwif; |
| struct ide_io_ports *io_ports = &hwif->io_ports; |
| unsigned long data_addr = io_ports->data_addr; |
| unsigned int words = (len + 1) >> 1; |
| u8 io_32bit = drive->io_32bit; |
| u8 mmio = (hwif->host_flags & IDE_HFLAG_MMIO) ? 1 : 0; |
| |
| if (io_32bit) { |
| unsigned long uninitialized_var(flags); |
| |
| if ((io_32bit & 2) && !mmio) { |
| local_irq_save(flags); |
| ata_vlb_sync(io_ports->nsect_addr); |
| } |
| |
| words >>= 1; |
| if (mmio) |
| __ide_mm_outsl((void __iomem *)data_addr, buf, words); |
| else |
| outsl(data_addr, buf, words); |
| |
| if ((io_32bit & 2) && !mmio) |
| local_irq_restore(flags); |
| |
| if (((len + 1) & 3) < 2) |
| return; |
| |
| buf += len & ~3; |
| words = 1; |
| } |
| |
| if (mmio) |
| __ide_mm_outsw((void __iomem *)data_addr, buf, words); |
| else |
| outsw(data_addr, buf, words); |
| } |
| EXPORT_SYMBOL_GPL(ide_output_data); |
| |
| const struct ide_tp_ops default_tp_ops = { |
| .exec_command = ide_exec_command, |
| .read_status = ide_read_status, |
| .read_altstatus = ide_read_altstatus, |
| .write_devctl = ide_write_devctl, |
| |
| .dev_select = ide_dev_select, |
| .tf_load = ide_tf_load, |
| .tf_read = ide_tf_read, |
| |
| .input_data = ide_input_data, |
| .output_data = ide_output_data, |
| }; |