| /* |
| * linux/drivers/ide/legacy/macide.c -- Macintosh IDE Driver |
| * |
| * Copyright (C) 1998 by Michael Schmitz |
| * |
| * This driver was written based on information obtained from the MacOS IDE |
| * driver binary by Mikael Forselius |
| * |
| * This file is subject to the terms and conditions of the GNU General Public |
| * License. See the file COPYING in the main directory of this archive for |
| * more details. |
| */ |
| |
| #include <linux/types.h> |
| #include <linux/mm.h> |
| #include <linux/interrupt.h> |
| #include <linux/blkdev.h> |
| #include <linux/hdreg.h> |
| #include <linux/delay.h> |
| #include <linux/ide.h> |
| |
| #include <asm/machw.h> |
| #include <asm/macintosh.h> |
| #include <asm/macints.h> |
| #include <asm/mac_baboon.h> |
| |
| #define IDE_BASE 0x50F1A000 /* Base address of IDE controller */ |
| |
| /* |
| * Generic IDE registers as offsets from the base |
| * These match MkLinux so they should be correct. |
| */ |
| |
| #define IDE_DATA 0x00 |
| #define IDE_ERROR 0x04 /* see err-bits */ |
| #define IDE_NSECTOR 0x08 /* nr of sectors to read/write */ |
| #define IDE_SECTOR 0x0c /* starting sector */ |
| #define IDE_LCYL 0x10 /* starting cylinder */ |
| #define IDE_HCYL 0x14 /* high byte of starting cyl */ |
| #define IDE_SELECT 0x18 /* 101dhhhh , d=drive, hhhh=head */ |
| #define IDE_STATUS 0x1c /* see status-bits */ |
| #define IDE_CONTROL 0x38 /* control/altstatus */ |
| |
| /* |
| * Mac-specific registers |
| */ |
| |
| /* |
| * this register is odd; it doesn't seem to do much and it's |
| * not word-aligned like virtually every other hardware register |
| * on the Mac... |
| */ |
| |
| #define IDE_IFR 0x101 /* (0x101) IDE interrupt flags on Quadra: |
| * |
| * Bit 0+1: some interrupt flags |
| * Bit 2+3: some interrupt enable |
| * Bit 4: ?? |
| * Bit 5: IDE interrupt flag (any hwif) |
| * Bit 6: maybe IDE interrupt enable (any hwif) ?? |
| * Bit 7: Any interrupt condition |
| */ |
| |
| volatile unsigned char *ide_ifr = (unsigned char *) (IDE_BASE + IDE_IFR); |
| |
| static int macide_offsets[IDE_NR_PORTS] = { |
| IDE_DATA, IDE_ERROR, IDE_NSECTOR, IDE_SECTOR, IDE_LCYL, |
| IDE_HCYL, IDE_SELECT, IDE_STATUS, IDE_CONTROL |
| }; |
| |
| int macide_ack_intr(ide_hwif_t* hwif) |
| { |
| if (*ide_ifr & 0x20) { |
| *ide_ifr &= ~0x20; |
| return 1; |
| } |
| return 0; |
| } |
| |
| #ifdef CONFIG_BLK_DEV_MAC_MEDIABAY |
| static void macide_mediabay_interrupt(int irq, void *dev_id) |
| { |
| int state = baboon->mb_status & 0x04; |
| |
| printk(KERN_INFO "macide: media bay %s detected\n", state? "removal":"insertion"); |
| } |
| #endif |
| |
| /* |
| * Probe for a Macintosh IDE interface |
| */ |
| |
| void macide_init(void) |
| { |
| hw_regs_t hw; |
| ide_hwif_t *hwif; |
| int index = -1; |
| |
| switch (macintosh_config->ide_type) { |
| case MAC_IDE_QUADRA: |
| ide_setup_ports(&hw, IDE_BASE, macide_offsets, |
| 0, 0, macide_ack_intr, |
| // quadra_ide_iops, |
| IRQ_NUBUS_F); |
| index = ide_register_hw(&hw, &hwif); |
| break; |
| case MAC_IDE_PB: |
| ide_setup_ports(&hw, IDE_BASE, macide_offsets, |
| 0, 0, macide_ack_intr, |
| // macide_pb_iops, |
| IRQ_NUBUS_C); |
| index = ide_register_hw(&hw, &hwif); |
| break; |
| case MAC_IDE_BABOON: |
| ide_setup_ports(&hw, BABOON_BASE, macide_offsets, |
| 0, 0, NULL, |
| // macide_baboon_iops, |
| IRQ_BABOON_1); |
| index = ide_register_hw(&hw, &hwif); |
| if (index == -1) break; |
| if (macintosh_config->ident == MAC_MODEL_PB190) { |
| |
| /* Fix breakage in ide-disk.c: drive capacity */ |
| /* is not initialized for drives without a */ |
| /* hardware ID, and we can't get that without */ |
| /* probing the drive which freezes a 190. */ |
| |
| ide_drive_t *drive = &ide_hwifs[index].drives[0]; |
| drive->capacity64 = drive->cyl*drive->head*drive->sect; |
| |
| #ifdef CONFIG_BLK_DEV_MAC_MEDIABAY |
| request_irq(IRQ_BABOON_2, macide_mediabay_interrupt, |
| IRQ_FLG_FAST, "mediabay", |
| macide_mediabay_interrupt); |
| #endif |
| } |
| break; |
| |
| default: |
| return; |
| } |
| |
| if (index != -1) { |
| hwif->mmio = 2; |
| if (macintosh_config->ide_type == MAC_IDE_QUADRA) |
| printk(KERN_INFO "ide%d: Macintosh Quadra IDE interface\n", index); |
| else if (macintosh_config->ide_type == MAC_IDE_PB) |
| printk(KERN_INFO "ide%d: Macintosh Powerbook IDE interface\n", index); |
| else if (macintosh_config->ide_type == MAC_IDE_BABOON) |
| printk(KERN_INFO "ide%d: Macintosh Powerbook Baboon IDE interface\n", index); |
| else |
| printk(KERN_INFO "ide%d: Unknown Macintosh IDE interface\n", index); |
| } |
| } |