[ARM] Move include/asm-arm/arch-* to arch/arm/*/include/mach
This just leaves include/asm-arm/plat-* to deal with.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
diff --git a/arch/arm/mach-s3c2410/include/mach/map.h b/arch/arm/mach-s3c2410/include/mach/map.h
new file mode 100644
index 0000000..64bf7e9
--- /dev/null
+++ b/arch/arm/mach-s3c2410/include/mach/map.h
@@ -0,0 +1,178 @@
+/* arch/arm/mach-s3c2410/include/mach/map.h
+ *
+ * Copyright (c) 2003 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C2410 - Memory map definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_MAP_H
+#define __ASM_ARCH_MAP_H
+
+#include <asm/plat-s3c/map.h>
+
+#define S3C2410_ADDR(x) S3C_ADDR(x)
+
+/* interrupt controller is the first thing we put in, to make
+ * the assembly code for the irq detection easier
+ */
+#define S3C24XX_VA_IRQ S3C_VA_IRQ
+#define S3C2410_PA_IRQ (0x4A000000)
+#define S3C24XX_SZ_IRQ SZ_1M
+
+/* memory controller registers */
+#define S3C24XX_VA_MEMCTRL S3C_VA_MEM
+#define S3C2410_PA_MEMCTRL (0x48000000)
+#define S3C24XX_SZ_MEMCTRL SZ_1M
+
+/* USB host controller */
+#define S3C2410_PA_USBHOST (0x49000000)
+#define S3C24XX_SZ_USBHOST SZ_1M
+
+/* DMA controller */
+#define S3C2410_PA_DMA (0x4B000000)
+#define S3C24XX_SZ_DMA SZ_1M
+
+/* Clock and Power management */
+#define S3C24XX_VA_CLKPWR S3C_VA_SYS
+#define S3C2410_PA_CLKPWR (0x4C000000)
+#define S3C24XX_SZ_CLKPWR SZ_1M
+
+/* LCD controller */
+#define S3C2410_PA_LCD (0x4D000000)
+#define S3C24XX_SZ_LCD SZ_1M
+
+/* NAND flash controller */
+#define S3C2410_PA_NAND (0x4E000000)
+#define S3C24XX_SZ_NAND SZ_1M
+
+/* UARTs */
+#define S3C24XX_VA_UART S3C_VA_UART
+#define S3C2410_PA_UART (0x50000000)
+#define S3C24XX_SZ_UART SZ_1M
+
+/* Timers */
+#define S3C24XX_VA_TIMER S3C_VA_TIMER
+#define S3C2410_PA_TIMER (0x51000000)
+#define S3C24XX_SZ_TIMER SZ_1M
+
+/* USB Device port */
+#define S3C2410_PA_USBDEV (0x52000000)
+#define S3C24XX_SZ_USBDEV SZ_1M
+
+/* Watchdog */
+#define S3C24XX_VA_WATCHDOG S3C_VA_WATCHDOG
+#define S3C2410_PA_WATCHDOG (0x53000000)
+#define S3C24XX_SZ_WATCHDOG SZ_1M
+
+/* IIC hardware controller */
+#define S3C2410_PA_IIC (0x54000000)
+#define S3C24XX_SZ_IIC SZ_1M
+
+/* IIS controller */
+#define S3C2410_PA_IIS (0x55000000)
+#define S3C24XX_SZ_IIS SZ_1M
+
+/* GPIO ports */
+
+/* the calculation for the VA of this must ensure that
+ * it is the same distance apart from the UART in the
+ * phsyical address space, as the initial mapping for the IO
+ * is done as a 1:1 maping. This puts it (currently) at
+ * 0xFA800000, which is not in the way of any current mapping
+ * by the base system.
+*/
+
+#define S3C2410_PA_GPIO (0x56000000)
+#define S3C24XX_VA_GPIO ((S3C2410_PA_GPIO - S3C24XX_PA_UART) + S3C24XX_VA_UART)
+#define S3C24XX_SZ_GPIO SZ_1M
+
+/* RTC */
+#define S3C2410_PA_RTC (0x57000000)
+#define S3C24XX_SZ_RTC SZ_1M
+
+/* ADC */
+#define S3C2410_PA_ADC (0x58000000)
+#define S3C24XX_SZ_ADC SZ_1M
+
+/* SPI */
+#define S3C2410_PA_SPI (0x59000000)
+#define S3C24XX_SZ_SPI SZ_1M
+
+/* SDI */
+#define S3C2410_PA_SDI (0x5A000000)
+#define S3C24XX_SZ_SDI SZ_1M
+
+/* CAMIF */
+#define S3C2440_PA_CAMIF (0x4F000000)
+#define S3C2440_SZ_CAMIF SZ_1M
+
+/* AC97 */
+
+#define S3C2440_PA_AC97 (0x5B000000)
+#define S3C2440_SZ_AC97 SZ_1M
+
+/* S3C2443 High-speed SD/MMC */
+#define S3C2443_PA_HSMMC (0x4A800000)
+#define S3C2443_SZ_HSMMC (256)
+
+/* ISA style IO, for each machine to sort out mappings for, if it
+ * implements it. We reserve two 16M regions for ISA.
+ */
+
+#define S3C24XX_VA_ISA_WORD S3C2410_ADDR(0x02000000)
+#define S3C24XX_VA_ISA_BYTE S3C2410_ADDR(0x03000000)
+
+/* physical addresses of all the chip-select areas */
+
+#define S3C2410_CS0 (0x00000000)
+#define S3C2410_CS1 (0x08000000)
+#define S3C2410_CS2 (0x10000000)
+#define S3C2410_CS3 (0x18000000)
+#define S3C2410_CS4 (0x20000000)
+#define S3C2410_CS5 (0x28000000)
+#define S3C2410_CS6 (0x30000000)
+#define S3C2410_CS7 (0x38000000)
+
+#define S3C2410_SDRAM_PA (S3C2410_CS6)
+
+/* Use a single interface for common resources between S3C24XX cpus */
+
+#define S3C24XX_PA_IRQ S3C2410_PA_IRQ
+#define S3C24XX_PA_MEMCTRL S3C2410_PA_MEMCTRL
+#define S3C24XX_PA_USBHOST S3C2410_PA_USBHOST
+#define S3C24XX_PA_DMA S3C2410_PA_DMA
+#define S3C24XX_PA_CLKPWR S3C2410_PA_CLKPWR
+#define S3C24XX_PA_LCD S3C2410_PA_LCD
+#define S3C24XX_PA_UART S3C2410_PA_UART
+#define S3C24XX_PA_TIMER S3C2410_PA_TIMER
+#define S3C24XX_PA_USBDEV S3C2410_PA_USBDEV
+#define S3C24XX_PA_WATCHDOG S3C2410_PA_WATCHDOG
+#define S3C24XX_PA_IIC S3C2410_PA_IIC
+#define S3C24XX_PA_IIS S3C2410_PA_IIS
+#define S3C24XX_PA_GPIO S3C2410_PA_GPIO
+#define S3C24XX_PA_RTC S3C2410_PA_RTC
+#define S3C24XX_PA_ADC S3C2410_PA_ADC
+#define S3C24XX_PA_SPI S3C2410_PA_SPI
+
+/* deal with the registers that move under the 2412/2413 */
+
+#if defined(CONFIG_CPU_S3C2412) || defined(CONFIG_CPU_S3C2413)
+#ifndef __ASSEMBLY__
+extern void __iomem *s3c24xx_va_gpio2;
+#endif
+#ifdef CONFIG_CPU_S3C2412_ONLY
+#define S3C24XX_VA_GPIO2 (S3C24XX_VA_GPIO + 0x10)
+#else
+#define S3C24XX_VA_GPIO2 s3c24xx_va_gpio2
+#endif
+#else
+#define s3c24xx_va_gpio2 S3C24XX_VA_GPIO
+#define S3C24XX_VA_GPIO2 S3C24XX_VA_GPIO
+#endif
+
+#endif /* __ASM_ARCH_MAP_H */