blob: b80ad9610e9752e3c1d9740f03ddaf5f7e0ec5d1 [file] [log] [blame]
/*
* Copyright (C) 2008-2009 ST-Ericsson SA
*
* Author: Srinidhi KASAGAR <srinidhi.kasagar@stericsson.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2, as
* published by the Free Software Foundation.
*
*/
#include <linux/types.h>
#include <linux/init.h>
#include <linux/device.h>
#include <linux/amba/bus.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/platform_device.h>
#include <linux/io.h>
#include <linux/mfd/abx500/ab8500.h>
#include <linux/mfd/dbx500-prcmu.h>
#include <linux/of.h>
#include <linux/of_platform.h>
#include <linux/regulator/machine.h>
#include <linux/platform_data/pinctrl-nomadik.h>
#include <linux/random.h>
#include <asm/pmu.h>
#include <asm/mach/map.h>
#include <asm/mach/arch.h>
#include <asm/hardware/gic.h>
#include <mach/hardware.h>
#include <mach/setup.h>
#include <mach/devices.h>
#include <mach/db8500-regs.h>
#include <mach/irqs.h>
#include "devices-db8500.h"
#include "ste-dma40-db8500.h"
#include "board-mop500.h"
/* minimum static i/o mapping required to boot U8500 platforms */
static struct map_desc u8500_uart_io_desc[] __initdata = {
__IO_DEV_DESC(U8500_UART0_BASE, SZ_4K),
__IO_DEV_DESC(U8500_UART2_BASE, SZ_4K),
};
/* U8500 and U9540 common io_desc */
static struct map_desc u8500_common_io_desc[] __initdata = {
/* SCU base also covers GIC CPU BASE and TWD with its 4K page */
__IO_DEV_DESC(U8500_SCU_BASE, SZ_4K),
__IO_DEV_DESC(U8500_GIC_DIST_BASE, SZ_4K),
__IO_DEV_DESC(U8500_L2CC_BASE, SZ_4K),
__IO_DEV_DESC(U8500_MTU0_BASE, SZ_4K),
__IO_DEV_DESC(U8500_BACKUPRAM0_BASE, SZ_8K),
__IO_DEV_DESC(U8500_CLKRST1_BASE, SZ_4K),
__IO_DEV_DESC(U8500_CLKRST2_BASE, SZ_4K),
__IO_DEV_DESC(U8500_CLKRST3_BASE, SZ_4K),
__IO_DEV_DESC(U8500_CLKRST5_BASE, SZ_4K),
__IO_DEV_DESC(U8500_CLKRST6_BASE, SZ_4K),
__IO_DEV_DESC(U8500_GPIO0_BASE, SZ_4K),
__IO_DEV_DESC(U8500_GPIO1_BASE, SZ_4K),
__IO_DEV_DESC(U8500_GPIO2_BASE, SZ_4K),
__IO_DEV_DESC(U8500_GPIO3_BASE, SZ_4K),
};
/* U8500 IO map specific description */
static struct map_desc u8500_io_desc[] __initdata = {
__IO_DEV_DESC(U8500_PRCMU_BASE, SZ_4K),
__IO_DEV_DESC(U8500_PRCMU_TCDM_BASE, SZ_4K),
};
/* U9540 IO map specific description */
static struct map_desc u9540_io_desc[] __initdata = {
__IO_DEV_DESC(U8500_PRCMU_BASE, SZ_4K + SZ_8K),
__IO_DEV_DESC(U8500_PRCMU_TCDM_BASE, SZ_4K + SZ_8K),
};
void __init u8500_map_io(void)
{
/*
* Map the UARTs early so that the DEBUG_LL stuff continues to work.
*/
iotable_init(u8500_uart_io_desc, ARRAY_SIZE(u8500_uart_io_desc));
ux500_map_io();
iotable_init(u8500_common_io_desc, ARRAY_SIZE(u8500_common_io_desc));
if (cpu_is_ux540_family())
iotable_init(u9540_io_desc, ARRAY_SIZE(u9540_io_desc));
else
iotable_init(u8500_io_desc, ARRAY_SIZE(u8500_io_desc));
_PRCMU_BASE = __io_address(U8500_PRCMU_BASE);
}
static struct resource db8500_pmu_resources[] = {
[0] = {
.start = IRQ_DB8500_PMU,
.end = IRQ_DB8500_PMU,
.flags = IORESOURCE_IRQ,
},
};
/*
* The PMU IRQ lines of two cores are wired together into a single interrupt.
* Bounce the interrupt to the other core if it's not ours.
*/
static irqreturn_t db8500_pmu_handler(int irq, void *dev, irq_handler_t handler)
{
irqreturn_t ret = handler(irq, dev);
int other = !smp_processor_id();
if (ret == IRQ_NONE && cpu_online(other))
irq_set_affinity(irq, cpumask_of(other));
/*
* We should be able to get away with the amount of IRQ_NONEs we give,
* while still having the spurious IRQ detection code kick in if the
* interrupt really starts hitting spuriously.
*/
return ret;
}
struct arm_pmu_platdata db8500_pmu_platdata = {
.handle_irq = db8500_pmu_handler,
};
static struct platform_device db8500_pmu_device = {
.name = "arm-pmu",
.id = -1,
.num_resources = ARRAY_SIZE(db8500_pmu_resources),
.resource = db8500_pmu_resources,
.dev.platform_data = &db8500_pmu_platdata,
};
static struct platform_device db8500_prcmu_device = {
.name = "db8500-prcmu",
};
static struct platform_device *platform_devs[] __initdata = {
&u8500_dma40_device,
&db8500_pmu_device,
&db8500_prcmu_device,
};
static resource_size_t __initdata db8500_gpio_base[] = {
U8500_GPIOBANK0_BASE,
U8500_GPIOBANK1_BASE,
U8500_GPIOBANK2_BASE,
U8500_GPIOBANK3_BASE,
U8500_GPIOBANK4_BASE,
U8500_GPIOBANK5_BASE,
U8500_GPIOBANK6_BASE,
U8500_GPIOBANK7_BASE,
U8500_GPIOBANK8_BASE,
};
static void __init db8500_add_gpios(struct device *parent)
{
struct nmk_gpio_platform_data pdata = {
.supports_sleepmode = true,
};
dbx500_add_gpios(parent, ARRAY_AND_SIZE(db8500_gpio_base),
IRQ_DB8500_GPIO0, &pdata);
dbx500_add_pinctrl(parent, "pinctrl-db8500", U8500_PRCMU_BASE);
}
static int usb_db8500_rx_dma_cfg[] = {
DB8500_DMA_DEV38_USB_OTG_IEP_1_9,
DB8500_DMA_DEV37_USB_OTG_IEP_2_10,
DB8500_DMA_DEV36_USB_OTG_IEP_3_11,
DB8500_DMA_DEV19_USB_OTG_IEP_4_12,
DB8500_DMA_DEV18_USB_OTG_IEP_5_13,
DB8500_DMA_DEV17_USB_OTG_IEP_6_14,
DB8500_DMA_DEV16_USB_OTG_IEP_7_15,
DB8500_DMA_DEV39_USB_OTG_IEP_8
};
static int usb_db8500_tx_dma_cfg[] = {
DB8500_DMA_DEV38_USB_OTG_OEP_1_9,
DB8500_DMA_DEV37_USB_OTG_OEP_2_10,
DB8500_DMA_DEV36_USB_OTG_OEP_3_11,
DB8500_DMA_DEV19_USB_OTG_OEP_4_12,
DB8500_DMA_DEV18_USB_OTG_OEP_5_13,
DB8500_DMA_DEV17_USB_OTG_OEP_6_14,
DB8500_DMA_DEV16_USB_OTG_OEP_7_15,
DB8500_DMA_DEV39_USB_OTG_OEP_8
};
static const char *db8500_read_soc_id(void)
{
void __iomem *uid = __io_address(U8500_BB_UID_BASE);
/* Throw these device-specific numbers into the entropy pool */
add_device_randomness(uid, 0x14);
return kasprintf(GFP_KERNEL, "%08x%08x%08x%08x%08x",
readl((u32 *)uid+1),
readl((u32 *)uid+1), readl((u32 *)uid+2),
readl((u32 *)uid+3), readl((u32 *)uid+4));
}
static struct device * __init db8500_soc_device_init(void)
{
const char *soc_id = db8500_read_soc_id();
return ux500_soc_device_init(soc_id);
}
/*
* This function is called from the board init
*/
struct device * __init u8500_init_devices(struct ab8500_platform_data *ab8500)
{
struct device *parent;
int i;
parent = db8500_soc_device_init();
db8500_add_rtc(parent);
db8500_add_gpios(parent);
db8500_add_usb(parent, usb_db8500_rx_dma_cfg, usb_db8500_tx_dma_cfg);
for (i = 0; i < ARRAY_SIZE(platform_devs); i++)
platform_devs[i]->dev.parent = parent;
db8500_prcmu_device.dev.platform_data = ab8500;
platform_add_devices(platform_devs, ARRAY_SIZE(platform_devs));
return parent;
}
#ifdef CONFIG_MACH_UX500_DT
/* TODO: Once all pieces are DT:ed, remove completely. */
static struct device * __init u8500_of_init_devices(void)
{
struct device *parent = db8500_soc_device_init();
db8500_add_usb(parent, usb_db8500_rx_dma_cfg, usb_db8500_tx_dma_cfg);
u8500_dma40_device.dev.parent = parent;
/*
* Devices to be DT:ed:
* u8500_dma40_device = todo
* db8500_pmu_device = done
* db8500_prcmu_device = done
*/
platform_device_register(&u8500_dma40_device);
return parent;
}
static struct of_dev_auxdata u8500_auxdata_lookup[] __initdata = {
/* Requires call-back bindings. */
OF_DEV_AUXDATA("arm,cortex-a9-pmu", 0, "arm-pmu", &db8500_pmu_platdata),
/* Requires DMA bindings. */
OF_DEV_AUXDATA("arm,pl011", 0x80120000, "uart0", &uart0_plat),
OF_DEV_AUXDATA("arm,pl011", 0x80121000, "uart1", &uart1_plat),
OF_DEV_AUXDATA("arm,pl011", 0x80007000, "uart2", &uart2_plat),
OF_DEV_AUXDATA("arm,pl022", 0x80002000, "ssp0", &ssp0_plat),
OF_DEV_AUXDATA("arm,pl18x", 0x80126000, "sdi0", &mop500_sdi0_data),
OF_DEV_AUXDATA("arm,pl18x", 0x80118000, "sdi1", &mop500_sdi1_data),
OF_DEV_AUXDATA("arm,pl18x", 0x80005000, "sdi2", &mop500_sdi2_data),
OF_DEV_AUXDATA("arm,pl18x", 0x80114000, "sdi4", &mop500_sdi4_data),
/* Requires clock name bindings. */
OF_DEV_AUXDATA("st,nomadik-gpio", 0x8012e000, "gpio.0", NULL),
OF_DEV_AUXDATA("st,nomadik-gpio", 0x8012e080, "gpio.1", NULL),
OF_DEV_AUXDATA("st,nomadik-gpio", 0x8000e000, "gpio.2", NULL),
OF_DEV_AUXDATA("st,nomadik-gpio", 0x8000e080, "gpio.3", NULL),
OF_DEV_AUXDATA("st,nomadik-gpio", 0x8000e100, "gpio.4", NULL),
OF_DEV_AUXDATA("st,nomadik-gpio", 0x8000e180, "gpio.5", NULL),
OF_DEV_AUXDATA("st,nomadik-gpio", 0x8011e000, "gpio.6", NULL),
OF_DEV_AUXDATA("st,nomadik-gpio", 0x8011e080, "gpio.7", NULL),
OF_DEV_AUXDATA("st,nomadik-gpio", 0xa03fe000, "gpio.8", NULL),
OF_DEV_AUXDATA("st,nomadik-i2c", 0x80004000, "nmk-i2c.0", NULL),
OF_DEV_AUXDATA("st,nomadik-i2c", 0x80122000, "nmk-i2c.1", NULL),
OF_DEV_AUXDATA("st,nomadik-i2c", 0x80128000, "nmk-i2c.2", NULL),
OF_DEV_AUXDATA("st,nomadik-i2c", 0x80110000, "nmk-i2c.3", NULL),
OF_DEV_AUXDATA("st,nomadik-i2c", 0x8012a000, "nmk-i2c.4", NULL),
/* Requires device name bindings. */
OF_DEV_AUXDATA("stericsson,nmk-pinctrl", U8500_PRCMU_BASE,
"pinctrl-db8500", NULL),
/* Requires clock name and DMA bindings. */
OF_DEV_AUXDATA("stericsson,ux500-msp-i2s", 0x80123000,
"ux500-msp-i2s.0", &msp0_platform_data),
OF_DEV_AUXDATA("stericsson,ux500-msp-i2s", 0x80124000,
"ux500-msp-i2s.1", &msp1_platform_data),
OF_DEV_AUXDATA("stericsson,ux500-msp-i2s", 0x80117000,
"ux500-msp-i2s.2", &msp2_platform_data),
OF_DEV_AUXDATA("stericsson,ux500-msp-i2s", 0x80125000,
"ux500-msp-i2s.3", &msp3_platform_data),
{},
};
static const struct of_device_id u8500_local_bus_nodes[] = {
/* only create devices below soc node */
{ .compatible = "stericsson,db8500", },
{ .compatible = "stericsson,db8500-prcmu", },
{ .compatible = "simple-bus"},
{ },
};
static void __init u8500_init_machine(void)
{
struct device *parent = NULL;
/* Pinmaps must be in place before devices register */
if (of_machine_is_compatible("st-ericsson,mop500"))
mop500_pinmaps_init();
else if (of_machine_is_compatible("calaosystems,snowball-a9500"))
snowball_pinmaps_init();
else if (of_machine_is_compatible("st-ericsson,hrefv60+"))
hrefv60_pinmaps_init();
else if (of_machine_is_compatible("st-ericsson,ccu9540")) {}
/* TODO: Add pinmaps for ccu9540 board. */
/* TODO: Export SoC, USB, cpu-freq and DMA40 */
parent = u8500_of_init_devices();
/* automatically probe child nodes of db8500 device */
of_platform_populate(NULL, u8500_local_bus_nodes, u8500_auxdata_lookup, parent);
}
static const char * stericsson_dt_platform_compat[] = {
"st-ericsson,u8500",
"st-ericsson,u8540",
"st-ericsson,u9500",
"st-ericsson,u9540",
NULL,
};
DT_MACHINE_START(U8500_DT, "ST-Ericsson Ux5x0 platform (Device Tree Support)")
.smp = smp_ops(ux500_smp_ops),
.map_io = u8500_map_io,
.init_irq = ux500_init_irq,
/* we re-use nomadik timer here */
.timer = &ux500_timer,
.handle_irq = gic_handle_irq,
.init_machine = u8500_init_machine,
.init_late = NULL,
.dt_compat = stericsson_dt_platform_compat,
MACHINE_END
#endif