USB: usb-storage: add BAD_SENSE flag
This patch (as1311) fixes a problem in usb-storage: Some devices are
pretty broken when it comes to reporting sense data. The information
they send back indicates that they have more than 18 bytes of sense
data available, but when the system asks for more than 18 they fail or
hang. The symptom is that probing fails with multiple resets.
The patch adds a new BAD_SENSE flag to indicate that usb-storage
should never ask for more than 18 bytes of sense data. The flag can
be set in an unusual_devs entry or via the "quirks=" module parameter,
and it is set automatically whenever a REQUEST SENSE command for more
than 18 bytes fails or times out.
An unusual_devs entry is added for the Agfa photo frame, which uses a
Prolific chip having this bug.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Tested-by: Daniel Kukula <daniel.kuku@gmail.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
diff --git a/drivers/usb/storage/transport.c b/drivers/usb/storage/transport.c
index 589f6b4..cc313d1 100644
--- a/drivers/usb/storage/transport.c
+++ b/drivers/usb/storage/transport.c
@@ -666,10 +666,11 @@
* to wait for at least one CHECK_CONDITION to determine
* SANE_SENSE support
*/
- if ((srb->cmnd[0] == ATA_16 || srb->cmnd[0] == ATA_12) &&
+ if (unlikely((srb->cmnd[0] == ATA_16 || srb->cmnd[0] == ATA_12) &&
result == USB_STOR_TRANSPORT_GOOD &&
!(us->fflags & US_FL_SANE_SENSE) &&
- !(srb->cmnd[2] & 0x20)) {
+ !(us->fflags & US_FL_BAD_SENSE) &&
+ !(srb->cmnd[2] & 0x20))) {
US_DEBUGP("-- SAT supported, increasing auto-sense\n");
us->fflags |= US_FL_SANE_SENSE;
}
@@ -718,6 +719,12 @@
if (test_bit(US_FLIDX_TIMED_OUT, &us->dflags)) {
US_DEBUGP("-- auto-sense aborted\n");
srb->result = DID_ABORT << 16;
+
+ /* If SANE_SENSE caused this problem, disable it */
+ if (sense_size != US_SENSE_SIZE) {
+ us->fflags &= ~US_FL_SANE_SENSE;
+ us->fflags |= US_FL_BAD_SENSE;
+ }
goto Handle_Errors;
}
@@ -727,10 +734,11 @@
* (small) sense request. This fixes some USB GSM modems
*/
if (temp_result == USB_STOR_TRANSPORT_FAILED &&
- (us->fflags & US_FL_SANE_SENSE) &&
- sense_size != US_SENSE_SIZE) {
+ sense_size != US_SENSE_SIZE) {
US_DEBUGP("-- auto-sense failure, retry small sense\n");
sense_size = US_SENSE_SIZE;
+ us->fflags &= ~US_FL_SANE_SENSE;
+ us->fflags |= US_FL_BAD_SENSE;
goto Retry_Sense;
}
@@ -754,6 +762,7 @@
*/
if (srb->sense_buffer[7] > (US_SENSE_SIZE - 8) &&
!(us->fflags & US_FL_SANE_SENSE) &&
+ !(us->fflags & US_FL_BAD_SENSE) &&
(srb->sense_buffer[0] & 0x7C) == 0x70) {
US_DEBUGP("-- SANE_SENSE support enabled\n");
us->fflags |= US_FL_SANE_SENSE;
diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h
index d4f034e..64a0a2c 100644
--- a/drivers/usb/storage/unusual_devs.h
+++ b/drivers/usb/storage/unusual_devs.h
@@ -818,6 +818,13 @@
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_FIX_CAPACITY ),
+/* Reported by Daniel Kukula <daniel.kuku@gmail.com> */
+UNUSUAL_DEV( 0x067b, 0x1063, 0x0100, 0x0100,
+ "Prolific Technology, Inc.",
+ "Prolific Storage Gadget",
+ US_SC_DEVICE, US_PR_DEVICE, NULL,
+ US_FL_BAD_SENSE ),
+
/* Reported by Rogerio Brito <rbrito@ime.usp.br> */
UNUSUAL_DEV( 0x067b, 0x2317, 0x0001, 0x001,
"Prolific Technology, Inc.",
diff --git a/drivers/usb/storage/usb.c b/drivers/usb/storage/usb.c
index 1599d86..f5c0264 100644
--- a/drivers/usb/storage/usb.c
+++ b/drivers/usb/storage/usb.c
@@ -463,6 +463,9 @@
case 'a':
f |= US_FL_SANE_SENSE;
break;
+ case 'b':
+ f |= US_FL_BAD_SENSE;
+ break;
case 'c':
f |= US_FL_FIX_CAPACITY;
break;