ARM: dts: imx6q{dl}: add a DTE uart pinctrl for uart2
In the arm2 board, the UART2 works in the dte mode.
So add a pinctrl for both the imx6q{dl} boards.
Signed-off-by: Huang Shijie <b32955@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
diff --git a/arch/arm/boot/dts/imx6dl.dtsi b/arch/arm/boot/dts/imx6dl.dtsi
index 4505109..d75e32c 100644
--- a/arch/arm/boot/dts/imx6dl.dtsi
+++ b/arch/arm/boot/dts/imx6dl.dtsi
@@ -230,6 +230,15 @@
MX6DL_PAD_EIM_D27__UART2_RX_DATA 0x1b0b1
>;
};
+
+ pinctrl_uart2_2: uart2grp-2 { /* DTE mode */
+ fsl,pins = <
+ MX6DL_PAD_EIM_D26__UART2_RX_DATA 0x1b0b1
+ MX6DL_PAD_EIM_D27__UART2_TX_DATA 0x1b0b1
+ MX6DL_PAD_EIM_D28__UART2_DTE_CTS_B 0x1b0b1
+ MX6DL_PAD_EIM_D29__UART2_DTE_RTS_B 0x1b0b1
+ >;
+ };
};
uart4 {
diff --git a/arch/arm/boot/dts/imx6q.dtsi b/arch/arm/boot/dts/imx6q.dtsi
index 6f4d6ab..e0b7bad 100644
--- a/arch/arm/boot/dts/imx6q.dtsi
+++ b/arch/arm/boot/dts/imx6q.dtsi
@@ -266,6 +266,15 @@
MX6Q_PAD_EIM_D27__UART2_RX_DATA 0x1b0b1
>;
};
+
+ pinctrl_uart2_2: uart2grp-2 { /* DTE mode */
+ fsl,pins = <
+ MX6Q_PAD_EIM_D26__UART2_RX_DATA 0x1b0b1
+ MX6Q_PAD_EIM_D27__UART2_TX_DATA 0x1b0b1
+ MX6Q_PAD_EIM_D28__UART2_DTE_CTS_B 0x1b0b1
+ MX6Q_PAD_EIM_D29__UART2_DTE_RTS_B 0x1b0b1
+ >;
+ };
};
uart4 {