| /* |
| * linux/drivers/net/ehea/ehea_ethtool.c |
| * |
| * eHEA ethernet device driver for IBM eServer System p |
| * |
| * (C) Copyright IBM Corp. 2006 |
| * |
| * Authors: |
| * Christoph Raisch <raisch@de.ibm.com> |
| * Jan-Bernd Themann <themann@de.ibm.com> |
| * Thomas Klein <tklein@de.ibm.com> |
| * |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2, or (at your option) |
| * any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. |
| */ |
| |
| #include "ehea.h" |
| #include "ehea_phyp.h" |
| |
| static int ehea_get_settings(struct net_device *dev, struct ethtool_cmd *cmd) |
| { |
| struct ehea_port *port = netdev_priv(dev); |
| int ret; |
| |
| ret = ehea_sense_port_attr(port); |
| |
| if (ret) |
| return ret; |
| |
| if (netif_carrier_ok(dev)) { |
| switch(port->port_speed) { |
| case EHEA_SPEED_10M: cmd->speed = SPEED_10; break; |
| case EHEA_SPEED_100M: cmd->speed = SPEED_100; break; |
| case EHEA_SPEED_1G: cmd->speed = SPEED_1000; break; |
| case EHEA_SPEED_10G: cmd->speed = SPEED_10000; break; |
| } |
| cmd->duplex = port->full_duplex == 1 ? |
| DUPLEX_FULL : DUPLEX_HALF; |
| } else { |
| cmd->speed = -1; |
| cmd->duplex = -1; |
| } |
| |
| cmd->supported = (SUPPORTED_10000baseT_Full | SUPPORTED_1000baseT_Full |
| | SUPPORTED_100baseT_Full | SUPPORTED_100baseT_Half |
| | SUPPORTED_10baseT_Full | SUPPORTED_10baseT_Half |
| | SUPPORTED_Autoneg | SUPPORTED_FIBRE); |
| |
| cmd->advertising = (ADVERTISED_10000baseT_Full | ADVERTISED_Autoneg |
| | ADVERTISED_FIBRE); |
| |
| cmd->port = PORT_FIBRE; |
| cmd->autoneg = port->autoneg == 1 ? AUTONEG_ENABLE : AUTONEG_DISABLE; |
| |
| return 0; |
| } |
| |
| static int ehea_set_settings(struct net_device *dev, struct ethtool_cmd *cmd) |
| { |
| struct ehea_port *port = netdev_priv(dev); |
| int ret = 0; |
| u32 sp; |
| |
| if (cmd->autoneg == AUTONEG_ENABLE) { |
| sp = EHEA_SPEED_AUTONEG; |
| goto doit; |
| } |
| |
| switch(cmd->speed) { |
| case SPEED_10: |
| if (cmd->duplex == DUPLEX_FULL) |
| sp = H_SPEED_10M_F; |
| else |
| sp = H_SPEED_10M_H; |
| break; |
| |
| case SPEED_100: |
| if (cmd->duplex == DUPLEX_FULL) |
| sp = H_SPEED_100M_F; |
| else |
| sp = H_SPEED_100M_H; |
| break; |
| |
| case SPEED_1000: |
| if (cmd->duplex == DUPLEX_FULL) |
| sp = H_SPEED_1G_F; |
| else |
| ret = -EINVAL; |
| break; |
| |
| case SPEED_10000: |
| if (cmd->duplex == DUPLEX_FULL) |
| sp = H_SPEED_10G_F; |
| else |
| ret = -EINVAL; |
| break; |
| |
| default: |
| ret = -EINVAL; |
| break; |
| } |
| |
| if (ret) |
| goto out; |
| doit: |
| ret = ehea_set_portspeed(port, sp); |
| |
| if (!ret) |
| ehea_info("%s: Port speed succesfully set: %dMbps " |
| "%s Duplex", |
| port->netdev->name, port->port_speed, |
| port->full_duplex == 1 ? "Full" : "Half"); |
| out: |
| return ret; |
| } |
| |
| static int ehea_nway_reset(struct net_device *dev) |
| { |
| struct ehea_port *port = netdev_priv(dev); |
| int ret; |
| |
| ret = ehea_set_portspeed(port, EHEA_SPEED_AUTONEG); |
| |
| if (!ret) |
| ehea_info("%s: Port speed succesfully set: %dMbps " |
| "%s Duplex", |
| port->netdev->name, port->port_speed, |
| port->full_duplex == 1 ? "Full" : "Half"); |
| return ret; |
| } |
| |
| static void ehea_get_drvinfo(struct net_device *dev, |
| struct ethtool_drvinfo *info) |
| { |
| strlcpy(info->driver, DRV_NAME, sizeof(info->driver) - 1); |
| strlcpy(info->version, DRV_VERSION, sizeof(info->version) - 1); |
| } |
| |
| static u32 ehea_get_msglevel(struct net_device *dev) |
| { |
| struct ehea_port *port = netdev_priv(dev); |
| return port->msg_enable; |
| } |
| |
| static void ehea_set_msglevel(struct net_device *dev, u32 value) |
| { |
| struct ehea_port *port = netdev_priv(dev); |
| port->msg_enable = value; |
| } |
| |
| static u32 ehea_get_rx_csum(struct net_device *dev) |
| { |
| return 1; |
| } |
| |
| static char ehea_ethtool_stats_keys[][ETH_GSTRING_LEN] = { |
| {"poll_max_processed"}, |
| {"queue_stopped"}, |
| {"min_swqe_avail"}, |
| {"poll_receive_err"}, |
| {"pkt_send"}, |
| {"pkt_xmit"}, |
| {"send_tasklet"}, |
| {"ehea_poll"}, |
| {"nwqe"}, |
| {"swqe_available_0"}, |
| {"sig_comp_iv"}, |
| {"swqe_refill_th"}, |
| {"port resets"}, |
| {"rxo"}, |
| {"rx64"}, |
| {"rx65"}, |
| {"rx128"}, |
| {"rx256"}, |
| {"rx512"}, |
| {"rx1024"}, |
| {"txo"}, |
| {"tx64"}, |
| {"tx65"}, |
| {"tx128"}, |
| {"tx256"}, |
| {"tx512"}, |
| {"tx1024"}, |
| }; |
| |
| static void ehea_get_strings(struct net_device *dev, u32 stringset, u8 *data) |
| { |
| if (stringset == ETH_SS_STATS) { |
| memcpy(data, &ehea_ethtool_stats_keys, |
| sizeof(ehea_ethtool_stats_keys)); |
| } |
| } |
| |
| static int ehea_get_stats_count(struct net_device *dev) |
| { |
| return ARRAY_SIZE(ehea_ethtool_stats_keys); |
| } |
| |
| static void ehea_get_ethtool_stats(struct net_device *dev, |
| struct ethtool_stats *stats, u64 *data) |
| { |
| u64 hret; |
| int i; |
| struct ehea_port *port = netdev_priv(dev); |
| struct ehea_adapter *adapter = port->adapter; |
| struct ehea_port_res *pr = &port->port_res[0]; |
| struct port_state *p_state = &pr->p_state; |
| struct hcp_ehea_port_cb6 *cb6; |
| |
| for (i = 0; i < ehea_get_stats_count(dev); i++) |
| data[i] = 0; |
| |
| i = 0; |
| |
| data[i++] = p_state->poll_max_processed; |
| data[i++] = p_state->queue_stopped; |
| data[i++] = p_state->min_swqe_avail; |
| data[i++] = p_state->poll_receive_errors; |
| data[i++] = p_state->pkt_send; |
| data[i++] = p_state->pkt_xmit; |
| data[i++] = p_state->send_tasklet; |
| data[i++] = p_state->ehea_poll; |
| data[i++] = p_state->nwqe; |
| data[i++] = atomic_read(&port->port_res[0].swqe_avail); |
| data[i++] = port->sig_comp_iv; |
| data[i++] = port->port_res[0].swqe_refill_th; |
| data[i++] = port->resets; |
| |
| cb6 = kzalloc(PAGE_SIZE, GFP_KERNEL); |
| if (!cb6) { |
| ehea_error("no mem for cb6"); |
| return; |
| } |
| |
| hret = ehea_h_query_ehea_port(adapter->handle, port->logical_port_id, |
| H_PORT_CB6, H_PORT_CB6_ALL, cb6); |
| if (netif_msg_hw(port)) |
| ehea_dump(cb6, sizeof(*cb6), "ehea_get_ethtool_stats"); |
| |
| if (hret == H_SUCCESS) { |
| data[i++] = cb6->rxo; |
| data[i++] = cb6->rx64; |
| data[i++] = cb6->rx65; |
| data[i++] = cb6->rx128; |
| data[i++] = cb6->rx256; |
| data[i++] = cb6->rx512; |
| data[i++] = cb6->rx1024; |
| data[i++] = cb6->txo; |
| data[i++] = cb6->tx64; |
| data[i++] = cb6->tx65; |
| data[i++] = cb6->tx128; |
| data[i++] = cb6->tx256; |
| data[i++] = cb6->tx512; |
| data[i++] = cb6->tx1024; |
| } else |
| ehea_error("query_ehea_port failed"); |
| |
| kfree(cb6); |
| } |
| |
| const struct ethtool_ops ehea_ethtool_ops = { |
| .get_settings = ehea_get_settings, |
| .get_drvinfo = ehea_get_drvinfo, |
| .get_msglevel = ehea_get_msglevel, |
| .set_msglevel = ehea_set_msglevel, |
| .get_link = ethtool_op_get_link, |
| .get_tx_csum = ethtool_op_get_tx_csum, |
| .get_sg = ethtool_op_get_sg, |
| .get_tso = ethtool_op_get_tso, |
| .set_tso = ethtool_op_set_tso, |
| .get_strings = ehea_get_strings, |
| .get_stats_count = ehea_get_stats_count, |
| .get_ethtool_stats = ehea_get_ethtool_stats, |
| .get_rx_csum = ehea_get_rx_csum, |
| .set_settings = ehea_set_settings, |
| .nway_reset = ehea_nway_reset, /* Restart autonegotiation */ |
| }; |
| |
| void ehea_set_ethtool_ops(struct net_device *netdev) |
| { |
| SET_ETHTOOL_OPS(netdev, &ehea_ethtool_ops); |
| } |