Merge branch 'for-next/musb' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next
* 'for-next/musb' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb:
usb: musb: omap2430: fix compile warning
usb: musb: fix pm_runtime calls while atomic
usb: musb: drop ARCH dependency
usb: musb: headers cleanup
usb: musb: allow building USB_MUSB_TUSB6010 as a module
usb: musb: use a Kconfig choice to pick the right DMA method
usb: musb: omap2+: save and restore OTG_INTERFSEL
usb: musb: omap2+: fix context api's
usb: musb: ux500: optimize DMA callback routine
diff --git a/Documentation/ABI/testing/sysfs-bus-usb b/Documentation/ABI/testing/sysfs-bus-usb
index e647378..b4f5487 100644
--- a/Documentation/ABI/testing/sysfs-bus-usb
+++ b/Documentation/ABI/testing/sysfs-bus-usb
@@ -119,6 +119,31 @@
Write a 1 to force the device to disconnect
(equivalent to unplugging a wired USB device).
+What: /sys/bus/usb/drivers/.../new_id
+Date: October 2011
+Contact: linux-usb@vger.kernel.org
+Description:
+ Writing a device ID to this file will attempt to
+ dynamically add a new device ID to a USB device driver.
+ This may allow the driver to support more hardware than
+ was included in the driver's static device ID support
+ table at compile time. The format for the device ID is:
+ idVendor idProduct bInterfaceClass.
+ The vendor ID and device ID fields are required, the
+ interface class is optional.
+ Upon successfully adding an ID, the driver will probe
+ for the device and attempt to bind to it. For example:
+ # echo "8086 10f5" > /sys/bus/usb/drivers/foo/new_id
+
+What: /sys/bus/usb-serial/drivers/.../new_id
+Date: October 2011
+Contact: linux-usb@vger.kernel.org
+Description:
+ For serial USB drivers, this attribute appears under the
+ extra bus folder "usb-serial" in sysfs; apart from that
+ difference, all descriptions from the entry
+ "/sys/bus/usb/drivers/.../new_id" apply.
+
What: /sys/bus/usb/drivers/.../remove_id
Date: November 2009
Contact: CHENG Renquan <rqcheng@smu.edu.sg>
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index 81c287f..60cfc25 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -2632,6 +2632,10 @@
[USB] Start with the old device initialization
scheme (default 0 = off).
+ usbcore.usbfs_memory_mb=
+ [USB] Memory limit (in MB) for buffers allocated by
+ usbfs (default = 16, 0 = max = 2047).
+
usbcore.use_both_schemes=
[USB] Try the other device initialization scheme
if the first one fails (default 1 = enabled).
diff --git a/drivers/hv/hv_kvp.c b/drivers/hv/hv_kvp.c
index 89f5244..0e8343f 100644
--- a/drivers/hv/hv_kvp.c
+++ b/drivers/hv/hv_kvp.c
@@ -212,11 +212,13 @@
* The windows host expects the key/value pair to be encoded
* in utf16.
*/
- keylen = utf8s_to_utf16s(key_name, strlen(key_name),
- (wchar_t *)kvp_data->data.key);
+ keylen = utf8s_to_utf16s(key_name, strlen(key_name), UTF16_HOST_ENDIAN,
+ (wchar_t *) kvp_data->data.key,
+ HV_KVP_EXCHANGE_MAX_KEY_SIZE / 2);
kvp_data->data.key_size = 2*(keylen + 1); /* utf16 encoding */
- valuelen = utf8s_to_utf16s(value, strlen(value),
- (wchar_t *)kvp_data->data.value);
+ valuelen = utf8s_to_utf16s(value, strlen(value), UTF16_HOST_ENDIAN,
+ (wchar_t *) kvp_data->data.value,
+ HV_KVP_EXCHANGE_MAX_VALUE_SIZE / 2);
kvp_data->data.value_size = 2*(valuelen + 1); /* utf16 encoding */
kvp_data->data.value_type = REG_SZ; /* all our values are strings */
diff --git a/drivers/usb/Makefile b/drivers/usb/Makefile
index 75eca76..53a7bc0 100644
--- a/drivers/usb/Makefile
+++ b/drivers/usb/Makefile
@@ -6,6 +6,8 @@
obj-$(CONFIG_USB) += core/
+obj-$(CONFIG_USB_OTG_UTILS) += otg/
+
obj-$(CONFIG_USB_DWC3) += dwc3/
obj-$(CONFIG_USB_MON) += mon/
@@ -51,7 +53,6 @@
obj-$(CONFIG_USB_MUSB_HDRC) += musb/
obj-$(CONFIG_USB_RENESAS_USBHS) += renesas_usbhs/
-obj-$(CONFIG_USB_OTG_UTILS) += otg/
obj-$(CONFIG_USB_GADGET) += gadget/
obj-$(CONFIG_USB_COMMON) += usb-common.o
diff --git a/drivers/usb/c67x00/c67x00-drv.c b/drivers/usb/c67x00/c67x00-drv.c
index 57ae44c..6f3b6e2 100644
--- a/drivers/usb/c67x00/c67x00-drv.c
+++ b/drivers/usb/c67x00/c67x00-drv.c
@@ -225,21 +225,10 @@
.name = "c67x00",
},
};
-MODULE_ALIAS("platform:c67x00");
-static int __init c67x00_init(void)
-{
- return platform_driver_register(&c67x00_driver);
-}
-
-static void __exit c67x00_exit(void)
-{
- platform_driver_unregister(&c67x00_driver);
-}
-
-module_init(c67x00_init);
-module_exit(c67x00_exit);
+module_platform_driver(c67x00_driver);
MODULE_AUTHOR("Peter Korsgaard, Jan Veldeman, Grant Likely");
MODULE_DESCRIPTION("Cypress C67X00 USB Controller Driver");
MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:c67x00");
diff --git a/drivers/usb/c67x00/c67x00-hcd.c b/drivers/usb/c67x00/c67x00-hcd.c
index d3e1356..75e47b8 100644
--- a/drivers/usb/c67x00/c67x00-hcd.c
+++ b/drivers/usb/c67x00/c67x00-hcd.c
@@ -271,7 +271,6 @@
if (int_status & SOFEOP_FLG(sie->sie_num)) {
c67x00_ll_usb_clear_status(sie, SOF_EOP_IRQ_FLG);
c67x00_sched_kick(c67x00);
- set_bit(HCD_FLAG_SAW_IRQ, &hcd->flags);
}
}
diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c
index e8c564a..d9d9340 100644
--- a/drivers/usb/class/cdc-acm.c
+++ b/drivers/usb/class/cdc-acm.c
@@ -58,12 +58,62 @@
static struct tty_driver *acm_tty_driver;
static struct acm *acm_table[ACM_TTY_MINORS];
-static DEFINE_MUTEX(open_mutex);
+static DEFINE_MUTEX(acm_table_lock);
-#define ACM_READY(acm) (acm && acm->dev && acm->port.count)
+/*
+ * acm_table accessors
+ */
-static const struct tty_port_operations acm_port_ops = {
-};
+/*
+ * Look up an ACM structure by index. If found and not disconnected, increment
+ * its refcount and return it with its mutex held.
+ */
+static struct acm *acm_get_by_index(unsigned index)
+{
+ struct acm *acm;
+
+ mutex_lock(&acm_table_lock);
+ acm = acm_table[index];
+ if (acm) {
+ mutex_lock(&acm->mutex);
+ if (acm->disconnected) {
+ mutex_unlock(&acm->mutex);
+ acm = NULL;
+ } else {
+ tty_port_get(&acm->port);
+ mutex_unlock(&acm->mutex);
+ }
+ }
+ mutex_unlock(&acm_table_lock);
+ return acm;
+}
+
+/*
+ * Try to find an available minor number and if found, associate it with 'acm'.
+ */
+static int acm_alloc_minor(struct acm *acm)
+{
+ int minor;
+
+ mutex_lock(&acm_table_lock);
+ for (minor = 0; minor < ACM_TTY_MINORS; minor++) {
+ if (!acm_table[minor]) {
+ acm_table[minor] = acm;
+ break;
+ }
+ }
+ mutex_unlock(&acm_table_lock);
+
+ return minor;
+}
+
+/* Release the minor number associated with 'acm'. */
+static void acm_release_minor(struct acm *acm)
+{
+ mutex_lock(&acm_table_lock);
+ acm_table[acm->minor] = NULL;
+ mutex_unlock(&acm_table_lock);
+}
/*
* Functions for ACM control messages.
@@ -267,9 +317,6 @@
goto exit;
}
- if (!ACM_READY(acm))
- goto exit;
-
usb_mark_last_busy(acm->dev);
data = (unsigned char *)(dr + 1);
@@ -429,8 +476,7 @@
spin_lock_irqsave(&acm->write_lock, flags);
acm_write_done(acm, wb);
spin_unlock_irqrestore(&acm->write_lock, flags);
- if (ACM_READY(acm))
- schedule_work(&acm->work);
+ schedule_work(&acm->work);
}
static void acm_softint(struct work_struct *work)
@@ -440,8 +486,6 @@
dev_vdbg(&acm->data->dev, "%s\n", __func__);
- if (!ACM_READY(acm))
- return;
tty = tty_port_tty_get(&acm->port);
if (!tty)
return;
@@ -453,93 +497,122 @@
* TTY handlers
*/
-static int acm_tty_open(struct tty_struct *tty, struct file *filp)
+static int acm_tty_install(struct tty_driver *driver, struct tty_struct *tty)
{
struct acm *acm;
- int rv = -ENODEV;
+ int retval;
- mutex_lock(&open_mutex);
+ dev_dbg(tty->dev, "%s\n", __func__);
- acm = acm_table[tty->index];
- if (!acm || !acm->dev)
- goto out;
- else
- rv = 0;
+ acm = acm_get_by_index(tty->index);
+ if (!acm)
+ return -ENODEV;
+
+ retval = tty_init_termios(tty);
+ if (retval)
+ goto error_init_termios;
+
+ tty->driver_data = acm;
+
+ /* Final install (we use the default method) */
+ tty_driver_kref_get(driver);
+ tty->count++;
+ driver->ttys[tty->index] = tty;
+
+ return 0;
+
+error_init_termios:
+ tty_port_put(&acm->port);
+ return retval;
+}
+
+static int acm_tty_open(struct tty_struct *tty, struct file *filp)
+{
+ struct acm *acm = tty->driver_data;
+
+ dev_dbg(tty->dev, "%s\n", __func__);
+
+ return tty_port_open(&acm->port, tty, filp);
+}
+
+static int acm_port_activate(struct tty_port *port, struct tty_struct *tty)
+{
+ struct acm *acm = container_of(port, struct acm, port);
+ int retval = -ENODEV;
dev_dbg(&acm->control->dev, "%s\n", __func__);
- set_bit(TTY_NO_WRITE_SPLIT, &tty->flags);
-
- tty->driver_data = acm;
- tty_port_tty_set(&acm->port, tty);
-
- if (usb_autopm_get_interface(acm->control) < 0)
- goto early_bail;
- else
- acm->control->needs_remote_wakeup = 1;
-
mutex_lock(&acm->mutex);
- if (acm->port.count++) {
- mutex_unlock(&acm->mutex);
- usb_autopm_put_interface(acm->control);
- goto out;
- }
+ if (acm->disconnected)
+ goto disconnected;
+
+ retval = usb_autopm_get_interface(acm->control);
+ if (retval)
+ goto error_get_interface;
+
+ /*
+ * FIXME: Why do we need this? Allocating 64K of physically contiguous
+ * memory is really nasty...
+ */
+ set_bit(TTY_NO_WRITE_SPLIT, &tty->flags);
+ acm->control->needs_remote_wakeup = 1;
acm->ctrlurb->dev = acm->dev;
if (usb_submit_urb(acm->ctrlurb, GFP_KERNEL)) {
dev_err(&acm->control->dev,
"%s - usb_submit_urb(ctrl irq) failed\n", __func__);
- goto bail_out;
+ goto error_submit_urb;
}
- if (0 > acm_set_control(acm, acm->ctrlout = ACM_CTRL_DTR | ACM_CTRL_RTS) &&
+ acm->ctrlout = ACM_CTRL_DTR | ACM_CTRL_RTS;
+ if (acm_set_control(acm, acm->ctrlout) < 0 &&
(acm->ctrl_caps & USB_CDC_CAP_LINE))
- goto bail_out;
+ goto error_set_control;
usb_autopm_put_interface(acm->control);
if (acm_submit_read_urbs(acm, GFP_KERNEL))
- goto bail_out;
-
- set_bit(ASYNCB_INITIALIZED, &acm->port.flags);
- rv = tty_port_block_til_ready(&acm->port, tty, filp);
+ goto error_submit_read_urbs;
mutex_unlock(&acm->mutex);
-out:
- mutex_unlock(&open_mutex);
- return rv;
-bail_out:
- acm->port.count--;
- mutex_unlock(&acm->mutex);
+ return 0;
+
+error_submit_read_urbs:
+ acm->ctrlout = 0;
+ acm_set_control(acm, acm->ctrlout);
+error_set_control:
+ usb_kill_urb(acm->ctrlurb);
+error_submit_urb:
usb_autopm_put_interface(acm->control);
-early_bail:
- mutex_unlock(&open_mutex);
- tty_port_tty_set(&acm->port, NULL);
- return -EIO;
+error_get_interface:
+disconnected:
+ mutex_unlock(&acm->mutex);
+ return retval;
}
-static void acm_tty_unregister(struct acm *acm)
+static void acm_port_destruct(struct tty_port *port)
{
- int i;
+ struct acm *acm = container_of(port, struct acm, port);
+
+ dev_dbg(&acm->control->dev, "%s\n", __func__);
tty_unregister_device(acm_tty_driver, acm->minor);
+ acm_release_minor(acm);
usb_put_intf(acm->control);
- acm_table[acm->minor] = NULL;
- usb_free_urb(acm->ctrlurb);
- for (i = 0; i < ACM_NW; i++)
- usb_free_urb(acm->wb[i].urb);
- for (i = 0; i < acm->rx_buflimit; i++)
- usb_free_urb(acm->read_urbs[i]);
kfree(acm->country_codes);
kfree(acm);
}
-static void acm_port_down(struct acm *acm)
+static void acm_port_shutdown(struct tty_port *port)
{
+ struct acm *acm = container_of(port, struct acm, port);
int i;
- if (acm->dev) {
+ dev_dbg(&acm->control->dev, "%s\n", __func__);
+
+ mutex_lock(&acm->mutex);
+ if (!acm->disconnected) {
usb_autopm_get_interface(acm->control);
acm_set_control(acm, acm->ctrlout = 0);
usb_kill_urb(acm->ctrlurb);
@@ -550,40 +623,28 @@
acm->control->needs_remote_wakeup = 0;
usb_autopm_put_interface(acm->control);
}
+ mutex_unlock(&acm->mutex);
+}
+
+static void acm_tty_cleanup(struct tty_struct *tty)
+{
+ struct acm *acm = tty->driver_data;
+ dev_dbg(&acm->control->dev, "%s\n", __func__);
+ tty_port_put(&acm->port);
}
static void acm_tty_hangup(struct tty_struct *tty)
{
struct acm *acm = tty->driver_data;
+ dev_dbg(&acm->control->dev, "%s\n", __func__);
tty_port_hangup(&acm->port);
- mutex_lock(&open_mutex);
- acm_port_down(acm);
- mutex_unlock(&open_mutex);
}
static void acm_tty_close(struct tty_struct *tty, struct file *filp)
{
struct acm *acm = tty->driver_data;
-
- /* Perform the closing process and see if we need to do the hardware
- shutdown */
- if (!acm)
- return;
-
- mutex_lock(&open_mutex);
- if (tty_port_close_start(&acm->port, tty, filp) == 0) {
- if (!acm->dev) {
- tty_port_tty_set(&acm->port, NULL);
- acm_tty_unregister(acm);
- tty->driver_data = NULL;
- }
- mutex_unlock(&open_mutex);
- return;
- }
- acm_port_down(acm);
- tty_port_close_end(&acm->port, tty);
- tty_port_tty_set(&acm->port, NULL);
- mutex_unlock(&open_mutex);
+ dev_dbg(&acm->control->dev, "%s\n", __func__);
+ tty_port_close(&acm->port, tty, filp);
}
static int acm_tty_write(struct tty_struct *tty,
@@ -595,8 +656,6 @@
int wbn;
struct acm_wb *wb;
- if (!ACM_READY(acm))
- return -EINVAL;
if (!count)
return 0;
@@ -625,8 +684,6 @@
static int acm_tty_write_room(struct tty_struct *tty)
{
struct acm *acm = tty->driver_data;
- if (!ACM_READY(acm))
- return -EINVAL;
/*
* Do not let the line discipline to know that we have a reserve,
* or it might get too enthusiastic.
@@ -637,7 +694,11 @@
static int acm_tty_chars_in_buffer(struct tty_struct *tty)
{
struct acm *acm = tty->driver_data;
- if (!ACM_READY(acm))
+ /*
+ * if the device was unplugged then any remaining characters fell out
+ * of the connector ;)
+ */
+ if (acm->disconnected)
return 0;
/*
* This is inaccurate (overcounts), but it works.
@@ -649,9 +710,6 @@
{
struct acm *acm = tty->driver_data;
- if (!ACM_READY(acm))
- return;
-
spin_lock_irq(&acm->read_lock);
acm->throttle_req = 1;
spin_unlock_irq(&acm->read_lock);
@@ -662,9 +720,6 @@
struct acm *acm = tty->driver_data;
unsigned int was_throttled;
- if (!ACM_READY(acm))
- return;
-
spin_lock_irq(&acm->read_lock);
was_throttled = acm->throttled;
acm->throttled = 0;
@@ -679,8 +734,7 @@
{
struct acm *acm = tty->driver_data;
int retval;
- if (!ACM_READY(acm))
- return -EINVAL;
+
retval = acm_send_break(acm, state ? 0xffff : 0);
if (retval < 0)
dev_dbg(&acm->control->dev, "%s - send break failed\n",
@@ -692,9 +746,6 @@
{
struct acm *acm = tty->driver_data;
- if (!ACM_READY(acm))
- return -EINVAL;
-
return (acm->ctrlout & ACM_CTRL_DTR ? TIOCM_DTR : 0) |
(acm->ctrlout & ACM_CTRL_RTS ? TIOCM_RTS : 0) |
(acm->ctrlin & ACM_CTRL_DSR ? TIOCM_DSR : 0) |
@@ -709,9 +760,6 @@
struct acm *acm = tty->driver_data;
unsigned int newctrl;
- if (!ACM_READY(acm))
- return -EINVAL;
-
newctrl = acm->ctrlout;
set = (set & TIOCM_DTR ? ACM_CTRL_DTR : 0) |
(set & TIOCM_RTS ? ACM_CTRL_RTS : 0);
@@ -728,11 +776,6 @@
static int acm_tty_ioctl(struct tty_struct *tty,
unsigned int cmd, unsigned long arg)
{
- struct acm *acm = tty->driver_data;
-
- if (!ACM_READY(acm))
- return -EINVAL;
-
return -ENOIOCTLCMD;
}
@@ -756,9 +799,6 @@
struct usb_cdc_line_coding newline;
int newctrl = acm->ctrlout;
- if (!ACM_READY(acm))
- return;
-
newline.dwDTERate = cpu_to_le32(tty_get_baud_rate(tty));
newline.bCharFormat = termios->c_cflag & CSTOPB ? 2 : 0;
newline.bParityType = termios->c_cflag & PARENB ?
@@ -788,6 +828,12 @@
}
}
+static const struct tty_port_operations acm_port_ops = {
+ .shutdown = acm_port_shutdown,
+ .activate = acm_port_activate,
+ .destruct = acm_port_destruct,
+};
+
/*
* USB probe and disconnect routines.
*/
@@ -1047,12 +1093,6 @@
}
made_compressed_probe:
dev_dbg(&intf->dev, "interfaces are valid\n");
- for (minor = 0; minor < ACM_TTY_MINORS && acm_table[minor]; minor++);
-
- if (minor == ACM_TTY_MINORS) {
- dev_err(&intf->dev, "no more free acm devices\n");
- return -ENODEV;
- }
acm = kzalloc(sizeof(struct acm), GFP_KERNEL);
if (acm == NULL) {
@@ -1060,6 +1100,13 @@
goto alloc_fail;
}
+ minor = acm_alloc_minor(acm);
+ if (minor == ACM_TTY_MINORS) {
+ dev_err(&intf->dev, "no more free acm devices\n");
+ kfree(acm);
+ return -ENODEV;
+ }
+
ctrlsize = usb_endpoint_maxp(epctrl);
readsize = usb_endpoint_maxp(epread) *
(quirks == SINGLE_RX_URB ? 1 : 2);
@@ -1218,8 +1265,6 @@
usb_get_intf(control_interface);
tty_register_device(acm_tty_driver, minor, &control_interface->dev);
- acm_table[minor] = acm;
-
return 0;
alloc_fail7:
for (i = 0; i < ACM_NW; i++)
@@ -1234,6 +1279,7 @@
alloc_fail4:
usb_free_coherent(usb_dev, ctrlsize, acm->ctrl_buffer, acm->ctrl_dma);
alloc_fail2:
+ acm_release_minor(acm);
kfree(acm);
alloc_fail:
return -ENOMEM;
@@ -1259,12 +1305,16 @@
struct acm *acm = usb_get_intfdata(intf);
struct usb_device *usb_dev = interface_to_usbdev(intf);
struct tty_struct *tty;
+ int i;
+
+ dev_dbg(&intf->dev, "%s\n", __func__);
/* sibling interface is already cleaning up */
if (!acm)
return;
- mutex_lock(&open_mutex);
+ mutex_lock(&acm->mutex);
+ acm->disconnected = true;
if (acm->country_codes) {
device_remove_file(&acm->control->dev,
&dev_attr_wCountryCodes);
@@ -1272,33 +1322,32 @@
&dev_attr_iCountryCodeRelDate);
}
device_remove_file(&acm->control->dev, &dev_attr_bmCapabilities);
- acm->dev = NULL;
usb_set_intfdata(acm->control, NULL);
usb_set_intfdata(acm->data, NULL);
+ mutex_unlock(&acm->mutex);
+
+ tty = tty_port_tty_get(&acm->port);
+ if (tty) {
+ tty_vhangup(tty);
+ tty_kref_put(tty);
+ }
stop_data_traffic(acm);
+ usb_free_urb(acm->ctrlurb);
+ for (i = 0; i < ACM_NW; i++)
+ usb_free_urb(acm->wb[i].urb);
+ for (i = 0; i < acm->rx_buflimit; i++)
+ usb_free_urb(acm->read_urbs[i]);
acm_write_buffers_free(acm);
- usb_free_coherent(usb_dev, acm->ctrlsize, acm->ctrl_buffer,
- acm->ctrl_dma);
+ usb_free_coherent(usb_dev, acm->ctrlsize, acm->ctrl_buffer, acm->ctrl_dma);
acm_read_buffers_free(acm);
if (!acm->combined_interfaces)
usb_driver_release_interface(&acm_driver, intf == acm->control ?
acm->data : acm->control);
- if (acm->port.count == 0) {
- acm_tty_unregister(acm);
- mutex_unlock(&open_mutex);
- return;
- }
-
- mutex_unlock(&open_mutex);
- tty = tty_port_tty_get(&acm->port);
- if (tty) {
- tty_hangup(tty);
- tty_kref_put(tty);
- }
+ tty_port_put(&acm->port);
}
#ifdef CONFIG_PM
@@ -1325,16 +1374,10 @@
if (cnt)
return 0;
- /*
- we treat opened interfaces differently,
- we must guard against open
- */
- mutex_lock(&acm->mutex);
- if (acm->port.count)
+ if (test_bit(ASYNCB_INITIALIZED, &acm->port.flags))
stop_data_traffic(acm);
- mutex_unlock(&acm->mutex);
return 0;
}
@@ -1353,8 +1396,7 @@
if (cnt)
return 0;
- mutex_lock(&acm->mutex);
- if (acm->port.count) {
+ if (test_bit(ASYNCB_INITIALIZED, &acm->port.flags)) {
rv = usb_submit_urb(acm->ctrlurb, GFP_NOIO);
spin_lock_irq(&acm->write_lock);
@@ -1378,7 +1420,6 @@
}
err_out:
- mutex_unlock(&acm->mutex);
return rv;
}
@@ -1387,15 +1428,14 @@
struct acm *acm = usb_get_intfdata(intf);
struct tty_struct *tty;
- mutex_lock(&acm->mutex);
- if (acm->port.count) {
+ if (test_bit(ASYNCB_INITIALIZED, &acm->port.flags)) {
tty = tty_port_tty_get(&acm->port);
if (tty) {
tty_hangup(tty);
tty_kref_put(tty);
}
}
- mutex_unlock(&acm->mutex);
+
return acm_resume(intf);
}
@@ -1594,8 +1634,10 @@
*/
static const struct tty_operations acm_ops = {
+ .install = acm_tty_install,
.open = acm_tty_open,
.close = acm_tty_close,
+ .cleanup = acm_tty_cleanup,
.hangup = acm_tty_hangup,
.write = acm_tty_write,
.write_room = acm_tty_write_room,
diff --git a/drivers/usb/class/cdc-acm.h b/drivers/usb/class/cdc-acm.h
index ca7937f..35ef887 100644
--- a/drivers/usb/class/cdc-acm.h
+++ b/drivers/usb/class/cdc-acm.h
@@ -101,6 +101,7 @@
int transmitting;
spinlock_t write_lock;
struct mutex mutex;
+ bool disconnected;
struct usb_cdc_line_coding line; /* bits, stop, parity */
struct work_struct work; /* work queue entry for line discipline waking up */
unsigned int ctrlin; /* input control lines (DCD, DSR, RI, break, overruns) */
diff --git a/drivers/usb/core/devio.c b/drivers/usb/core/devio.c
index e3beaf2..d8cf06f 100644
--- a/drivers/usb/core/devio.c
+++ b/drivers/usb/core/devio.c
@@ -86,6 +86,7 @@
void __user *userbuffer;
void __user *userurb;
struct urb *urb;
+ unsigned int mem_usage;
int status;
u32 secid;
u8 bulk_addr;
@@ -108,8 +109,44 @@
#define USB_DEVICE_DEV MKDEV(USB_DEVICE_MAJOR, 0)
-#define MAX_USBFS_BUFFER_SIZE 16384
+/* Limit on the total amount of memory we can allocate for transfers */
+static unsigned usbfs_memory_mb = 16;
+module_param(usbfs_memory_mb, uint, 0644);
+MODULE_PARM_DESC(usbfs_memory_mb,
+ "maximum MB allowed for usbfs buffers (0 = no limit)");
+/* Hard limit, necessary to avoid aithmetic overflow */
+#define USBFS_XFER_MAX (UINT_MAX / 2 - 1000000)
+
+static atomic_t usbfs_memory_usage; /* Total memory currently allocated */
+
+/* Check whether it's okay to allocate more memory for a transfer */
+static int usbfs_increase_memory_usage(unsigned amount)
+{
+ unsigned lim;
+
+ /*
+ * Convert usbfs_memory_mb to bytes, avoiding overflows.
+ * 0 means use the hard limit (effectively unlimited).
+ */
+ lim = ACCESS_ONCE(usbfs_memory_mb);
+ if (lim == 0 || lim > (USBFS_XFER_MAX >> 20))
+ lim = USBFS_XFER_MAX;
+ else
+ lim <<= 20;
+
+ atomic_add(amount, &usbfs_memory_usage);
+ if (atomic_read(&usbfs_memory_usage) <= lim)
+ return 0;
+ atomic_sub(amount, &usbfs_memory_usage);
+ return -ENOMEM;
+}
+
+/* Memory for a transfer is being deallocated */
+static void usbfs_decrease_memory_usage(unsigned amount)
+{
+ atomic_sub(amount, &usbfs_memory_usage);
+}
static int connected(struct dev_state *ps)
{
@@ -253,6 +290,7 @@
kfree(as->urb->transfer_buffer);
kfree(as->urb->setup_packet);
usb_free_urb(as->urb);
+ usbfs_decrease_memory_usage(as->mem_usage);
kfree(as);
}
@@ -792,9 +830,15 @@
wLength = ctrl.wLength; /* To suppress 64k PAGE_SIZE warning */
if (wLength > PAGE_SIZE)
return -EINVAL;
+ ret = usbfs_increase_memory_usage(PAGE_SIZE + sizeof(struct urb) +
+ sizeof(struct usb_ctrlrequest));
+ if (ret)
+ return ret;
tbuf = (unsigned char *)__get_free_page(GFP_KERNEL);
- if (!tbuf)
- return -ENOMEM;
+ if (!tbuf) {
+ ret = -ENOMEM;
+ goto done;
+ }
tmo = ctrl.timeout;
snoop(&dev->dev, "control urb: bRequestType=%02x "
"bRequest=%02x wValue=%04x "
@@ -806,8 +850,8 @@
if (ctrl.bRequestType & 0x80) {
if (ctrl.wLength && !access_ok(VERIFY_WRITE, ctrl.data,
ctrl.wLength)) {
- free_page((unsigned long)tbuf);
- return -EINVAL;
+ ret = -EINVAL;
+ goto done;
}
pipe = usb_rcvctrlpipe(dev, 0);
snoop_urb(dev, NULL, pipe, ctrl.wLength, tmo, SUBMIT, NULL, 0);
@@ -821,15 +865,15 @@
tbuf, max(i, 0));
if ((i > 0) && ctrl.wLength) {
if (copy_to_user(ctrl.data, tbuf, i)) {
- free_page((unsigned long)tbuf);
- return -EFAULT;
+ ret = -EFAULT;
+ goto done;
}
}
} else {
if (ctrl.wLength) {
if (copy_from_user(tbuf, ctrl.data, ctrl.wLength)) {
- free_page((unsigned long)tbuf);
- return -EFAULT;
+ ret = -EFAULT;
+ goto done;
}
}
pipe = usb_sndctrlpipe(dev, 0);
@@ -843,14 +887,18 @@
usb_lock_device(dev);
snoop_urb(dev, NULL, pipe, max(i, 0), min(i, 0), COMPLETE, NULL, 0);
}
- free_page((unsigned long)tbuf);
if (i < 0 && i != -EPIPE) {
dev_printk(KERN_DEBUG, &dev->dev, "usbfs: USBDEVFS_CONTROL "
"failed cmd %s rqt %u rq %u len %u ret %d\n",
current->comm, ctrl.bRequestType, ctrl.bRequest,
ctrl.wLength, i);
}
- return i;
+ ret = i;
+ done:
+ free_page((unsigned long) tbuf);
+ usbfs_decrease_memory_usage(PAGE_SIZE + sizeof(struct urb) +
+ sizeof(struct usb_ctrlrequest));
+ return ret;
}
static int proc_bulk(struct dev_state *ps, void __user *arg)
@@ -877,15 +925,20 @@
if (!usb_maxpacket(dev, pipe, !(bulk.ep & USB_DIR_IN)))
return -EINVAL;
len1 = bulk.len;
- if (len1 > MAX_USBFS_BUFFER_SIZE)
+ if (len1 >= USBFS_XFER_MAX)
return -EINVAL;
- if (!(tbuf = kmalloc(len1, GFP_KERNEL)))
- return -ENOMEM;
+ ret = usbfs_increase_memory_usage(len1 + sizeof(struct urb));
+ if (ret)
+ return ret;
+ if (!(tbuf = kmalloc(len1, GFP_KERNEL))) {
+ ret = -ENOMEM;
+ goto done;
+ }
tmo = bulk.timeout;
if (bulk.ep & 0x80) {
if (len1 && !access_ok(VERIFY_WRITE, bulk.data, len1)) {
- kfree(tbuf);
- return -EINVAL;
+ ret = -EINVAL;
+ goto done;
}
snoop_urb(dev, NULL, pipe, len1, tmo, SUBMIT, NULL, 0);
@@ -896,15 +949,15 @@
if (!i && len2) {
if (copy_to_user(bulk.data, tbuf, len2)) {
- kfree(tbuf);
- return -EFAULT;
+ ret = -EFAULT;
+ goto done;
}
}
} else {
if (len1) {
if (copy_from_user(tbuf, bulk.data, len1)) {
- kfree(tbuf);
- return -EFAULT;
+ ret = -EFAULT;
+ goto done;
}
}
snoop_urb(dev, NULL, pipe, len1, tmo, SUBMIT, tbuf, len1);
@@ -914,10 +967,11 @@
usb_lock_device(dev);
snoop_urb(dev, NULL, pipe, len2, i, COMPLETE, NULL, 0);
}
+ ret = (i < 0 ? i : len2);
+ done:
kfree(tbuf);
- if (i < 0)
- return i;
- return len2;
+ usbfs_decrease_memory_usage(len1 + sizeof(struct urb));
+ return ret;
}
static int proc_resetep(struct dev_state *ps, void __user *arg)
@@ -1062,7 +1116,7 @@
{
struct usbdevfs_iso_packet_desc *isopkt = NULL;
struct usb_host_endpoint *ep;
- struct async *as;
+ struct async *as = NULL;
struct usb_ctrlrequest *dr = NULL;
unsigned int u, totlen, isofrmlen;
int ret, ifnum = -1;
@@ -1095,32 +1149,30 @@
}
if (!ep)
return -ENOENT;
+
+ u = 0;
switch(uurb->type) {
case USBDEVFS_URB_TYPE_CONTROL:
if (!usb_endpoint_xfer_control(&ep->desc))
return -EINVAL;
- /* min 8 byte setup packet,
- * max 8 byte setup plus an arbitrary data stage */
- if (uurb->buffer_length < 8 ||
- uurb->buffer_length > (8 + MAX_USBFS_BUFFER_SIZE))
+ /* min 8 byte setup packet */
+ if (uurb->buffer_length < 8)
return -EINVAL;
dr = kmalloc(sizeof(struct usb_ctrlrequest), GFP_KERNEL);
if (!dr)
return -ENOMEM;
if (copy_from_user(dr, uurb->buffer, 8)) {
- kfree(dr);
- return -EFAULT;
+ ret = -EFAULT;
+ goto error;
}
if (uurb->buffer_length < (le16_to_cpup(&dr->wLength) + 8)) {
- kfree(dr);
- return -EINVAL;
+ ret = -EINVAL;
+ goto error;
}
ret = check_ctrlrecip(ps, dr->bRequestType, dr->bRequest,
le16_to_cpup(&dr->wIndex));
- if (ret) {
- kfree(dr);
- return ret;
- }
+ if (ret)
+ goto error;
uurb->number_of_packets = 0;
uurb->buffer_length = le16_to_cpup(&dr->wLength);
uurb->buffer += 8;
@@ -1138,6 +1190,7 @@
__le16_to_cpup(&dr->wValue),
__le16_to_cpup(&dr->wIndex),
__le16_to_cpup(&dr->wLength));
+ u = sizeof(struct usb_ctrlrequest);
break;
case USBDEVFS_URB_TYPE_BULK:
@@ -1151,8 +1204,6 @@
goto interrupt_urb;
}
uurb->number_of_packets = 0;
- if (uurb->buffer_length > MAX_USBFS_BUFFER_SIZE)
- return -EINVAL;
break;
case USBDEVFS_URB_TYPE_INTERRUPT:
@@ -1160,8 +1211,6 @@
return -EINVAL;
interrupt_urb:
uurb->number_of_packets = 0;
- if (uurb->buffer_length > MAX_USBFS_BUFFER_SIZE)
- return -EINVAL;
break;
case USBDEVFS_URB_TYPE_ISO:
@@ -1176,50 +1225,53 @@
if (!(isopkt = kmalloc(isofrmlen, GFP_KERNEL)))
return -ENOMEM;
if (copy_from_user(isopkt, iso_frame_desc, isofrmlen)) {
- kfree(isopkt);
- return -EFAULT;
+ ret = -EFAULT;
+ goto error;
}
for (totlen = u = 0; u < uurb->number_of_packets; u++) {
/* arbitrary limit,
* sufficient for USB 2.0 high-bandwidth iso */
if (isopkt[u].length > 8192) {
- kfree(isopkt);
- return -EINVAL;
+ ret = -EINVAL;
+ goto error;
}
totlen += isopkt[u].length;
}
- /* 3072 * 64 microframes */
- if (totlen > 196608) {
- kfree(isopkt);
- return -EINVAL;
- }
+ u *= sizeof(struct usb_iso_packet_descriptor);
uurb->buffer_length = totlen;
break;
default:
return -EINVAL;
}
+
+ if (uurb->buffer_length >= USBFS_XFER_MAX) {
+ ret = -EINVAL;
+ goto error;
+ }
if (uurb->buffer_length > 0 &&
!access_ok(is_in ? VERIFY_WRITE : VERIFY_READ,
uurb->buffer, uurb->buffer_length)) {
- kfree(isopkt);
- kfree(dr);
- return -EFAULT;
+ ret = -EFAULT;
+ goto error;
}
as = alloc_async(uurb->number_of_packets);
if (!as) {
- kfree(isopkt);
- kfree(dr);
- return -ENOMEM;
+ ret = -ENOMEM;
+ goto error;
}
+ u += sizeof(struct async) + sizeof(struct urb) + uurb->buffer_length;
+ ret = usbfs_increase_memory_usage(u);
+ if (ret)
+ goto error;
+ as->mem_usage = u;
+
if (uurb->buffer_length > 0) {
as->urb->transfer_buffer = kmalloc(uurb->buffer_length,
GFP_KERNEL);
if (!as->urb->transfer_buffer) {
- kfree(isopkt);
- kfree(dr);
- free_async(as);
- return -ENOMEM;
+ ret = -ENOMEM;
+ goto error;
}
/* Isochronous input data may end up being discontiguous
* if some of the packets are short. Clear the buffer so
@@ -1253,6 +1305,7 @@
as->urb->transfer_buffer_length = uurb->buffer_length;
as->urb->setup_packet = (unsigned char *)dr;
+ dr = NULL;
as->urb->start_frame = uurb->start_frame;
as->urb->number_of_packets = uurb->number_of_packets;
if (uurb->type == USBDEVFS_URB_TYPE_ISO ||
@@ -1268,6 +1321,7 @@
totlen += isopkt[u].length;
}
kfree(isopkt);
+ isopkt = NULL;
as->ps = ps;
as->userurb = arg;
if (is_in && uurb->buffer_length > 0)
@@ -1282,8 +1336,8 @@
if (!is_in && uurb->buffer_length > 0) {
if (copy_from_user(as->urb->transfer_buffer, uurb->buffer,
uurb->buffer_length)) {
- free_async(as);
- return -EFAULT;
+ ret = -EFAULT;
+ goto error;
}
}
snoop_urb(ps->dev, as->userurb, as->urb->pipe,
@@ -1329,10 +1383,16 @@
snoop_urb(ps->dev, as->userurb, as->urb->pipe,
0, ret, COMPLETE, NULL, 0);
async_removepending(as);
- free_async(as);
- return ret;
+ goto error;
}
return 0;
+
+ error:
+ kfree(isopkt);
+ kfree(dr);
+ if (as)
+ free_async(as);
+ return ret;
}
static int proc_submiturb(struct dev_state *ps, void __user *arg)
diff --git a/drivers/usb/core/driver.c b/drivers/usb/core/driver.c
index 45887a0..73abd8a 100644
--- a/drivers/usb/core/driver.c
+++ b/drivers/usb/core/driver.c
@@ -45,10 +45,12 @@
struct usb_dynid *dynid;
u32 idVendor = 0;
u32 idProduct = 0;
+ unsigned int bInterfaceClass = 0;
int fields = 0;
int retval = 0;
- fields = sscanf(buf, "%x %x", &idVendor, &idProduct);
+ fields = sscanf(buf, "%x %x %x", &idVendor, &idProduct,
+ &bInterfaceClass);
if (fields < 2)
return -EINVAL;
@@ -60,6 +62,10 @@
dynid->id.idVendor = idVendor;
dynid->id.idProduct = idProduct;
dynid->id.match_flags = USB_DEVICE_ID_MATCH_DEVICE;
+ if (fields == 3) {
+ dynid->id.bInterfaceClass = (u8)bInterfaceClass;
+ dynid->id.match_flags |= USB_DEVICE_ID_MATCH_INT_CLASS;
+ }
spin_lock(&dynids->lock);
list_add_tail(&dynid->node, &dynids->list);
diff --git a/drivers/usb/core/hcd-pci.c b/drivers/usb/core/hcd-pci.c
index a004db3..d136b8f 100644
--- a/drivers/usb/core/hcd-pci.c
+++ b/drivers/usb/core/hcd-pci.c
@@ -453,10 +453,6 @@
pci_set_master(pci_dev);
- clear_bit(HCD_FLAG_SAW_IRQ, &hcd->flags);
- if (hcd->shared_hcd)
- clear_bit(HCD_FLAG_SAW_IRQ, &hcd->shared_hcd->flags);
-
if (hcd->driver->pci_resume && !HCD_DEAD(hcd)) {
if (event != PM_EVENT_AUTO_RESUME)
wait_for_companions(pci_dev, hcd);
diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c
index 13222d3..eb19cba 100644
--- a/drivers/usb/core/hcd.c
+++ b/drivers/usb/core/hcd.c
@@ -658,7 +658,7 @@
len > offsetof(struct usb_device_descriptor,
bDeviceProtocol))
((struct usb_device_descriptor *) ubuf)->
- bDeviceProtocol = 1;
+ bDeviceProtocol = USB_HUB_PR_HS_SINGLE_TT;
}
/* any errors get returned through the urb completion */
@@ -1168,20 +1168,6 @@
if (urb->unlinked)
return -EBUSY;
urb->unlinked = status;
-
- /* IRQ setup can easily be broken so that USB controllers
- * never get completion IRQs ... maybe even the ones we need to
- * finish unlinking the initial failed usb_set_address()
- * or device descriptor fetch.
- */
- if (!HCD_SAW_IRQ(hcd) && !is_root_hub(urb->dev)) {
- dev_warn(hcd->self.controller, "Unlink after no-IRQ? "
- "Controller is probably using the wrong IRQ.\n");
- set_bit(HCD_FLAG_SAW_IRQ, &hcd->flags);
- if (hcd->shared_hcd)
- set_bit(HCD_FLAG_SAW_IRQ, &hcd->shared_hcd->flags);
- }
-
return 0;
}
EXPORT_SYMBOL_GPL(usb_hcd_check_unlink_urb);
@@ -1412,11 +1398,10 @@
ret = -EAGAIN;
else
urb->transfer_flags |= URB_DMA_MAP_SG;
- if (n != urb->num_sgs) {
- urb->num_sgs = n;
+ urb->num_mapped_sgs = n;
+ if (n != urb->num_sgs)
urb->transfer_flags |=
URB_DMA_SG_COMBINED;
- }
} else if (urb->sg) {
struct scatterlist *sg = urb->sg;
urb->transfer_dma = dma_map_page(
@@ -2148,16 +2133,12 @@
*/
local_irq_save(flags);
- if (unlikely(HCD_DEAD(hcd) || !HCD_HW_ACCESSIBLE(hcd))) {
+ if (unlikely(HCD_DEAD(hcd) || !HCD_HW_ACCESSIBLE(hcd)))
rc = IRQ_NONE;
- } else if (hcd->driver->irq(hcd) == IRQ_NONE) {
+ else if (hcd->driver->irq(hcd) == IRQ_NONE)
rc = IRQ_NONE;
- } else {
- set_bit(HCD_FLAG_SAW_IRQ, &hcd->flags);
- if (hcd->shared_hcd)
- set_bit(HCD_FLAG_SAW_IRQ, &hcd->shared_hcd->flags);
+ else
rc = IRQ_HANDLED;
- }
local_irq_restore(flags);
return rc;
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index 7978146..79d339e 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -84,7 +84,7 @@
static inline int hub_is_superspeed(struct usb_device *hdev)
{
- return (hdev->descriptor.bDeviceProtocol == 3);
+ return (hdev->descriptor.bDeviceProtocol == USB_HUB_PR_SS);
}
/* Protect struct usb_device->state and ->children members
@@ -1041,58 +1041,58 @@
dev_dbg(hub_dev, "standalone hub\n");
switch (wHubCharacteristics & HUB_CHAR_LPSM) {
- case 0x00:
- dev_dbg(hub_dev, "ganged power switching\n");
- break;
- case 0x01:
- dev_dbg(hub_dev, "individual port power switching\n");
- break;
- case 0x02:
- case 0x03:
- dev_dbg(hub_dev, "no power switching (usb 1.0)\n");
- break;
+ case HUB_CHAR_COMMON_LPSM:
+ dev_dbg(hub_dev, "ganged power switching\n");
+ break;
+ case HUB_CHAR_INDV_PORT_LPSM:
+ dev_dbg(hub_dev, "individual port power switching\n");
+ break;
+ case HUB_CHAR_NO_LPSM:
+ case HUB_CHAR_LPSM:
+ dev_dbg(hub_dev, "no power switching (usb 1.0)\n");
+ break;
}
switch (wHubCharacteristics & HUB_CHAR_OCPM) {
- case 0x00:
- dev_dbg(hub_dev, "global over-current protection\n");
- break;
- case 0x08:
- dev_dbg(hub_dev, "individual port over-current protection\n");
- break;
- case 0x10:
- case 0x18:
- dev_dbg(hub_dev, "no over-current protection\n");
- break;
+ case HUB_CHAR_COMMON_OCPM:
+ dev_dbg(hub_dev, "global over-current protection\n");
+ break;
+ case HUB_CHAR_INDV_PORT_OCPM:
+ dev_dbg(hub_dev, "individual port over-current protection\n");
+ break;
+ case HUB_CHAR_NO_OCPM:
+ case HUB_CHAR_OCPM:
+ dev_dbg(hub_dev, "no over-current protection\n");
+ break;
}
spin_lock_init (&hub->tt.lock);
INIT_LIST_HEAD (&hub->tt.clear_list);
INIT_WORK(&hub->tt.clear_work, hub_tt_work);
switch (hdev->descriptor.bDeviceProtocol) {
- case 0:
- break;
- case 1:
- dev_dbg(hub_dev, "Single TT\n");
- hub->tt.hub = hdev;
- break;
- case 2:
- ret = usb_set_interface(hdev, 0, 1);
- if (ret == 0) {
- dev_dbg(hub_dev, "TT per port\n");
- hub->tt.multi = 1;
- } else
- dev_err(hub_dev, "Using single TT (err %d)\n",
- ret);
- hub->tt.hub = hdev;
- break;
- case 3:
- /* USB 3.0 hubs don't have a TT */
- break;
- default:
- dev_dbg(hub_dev, "Unrecognized hub protocol %d\n",
- hdev->descriptor.bDeviceProtocol);
- break;
+ case USB_HUB_PR_FS:
+ break;
+ case USB_HUB_PR_HS_SINGLE_TT:
+ dev_dbg(hub_dev, "Single TT\n");
+ hub->tt.hub = hdev;
+ break;
+ case USB_HUB_PR_HS_MULTI_TT:
+ ret = usb_set_interface(hdev, 0, 1);
+ if (ret == 0) {
+ dev_dbg(hub_dev, "TT per port\n");
+ hub->tt.multi = 1;
+ } else
+ dev_err(hub_dev, "Using single TT (err %d)\n",
+ ret);
+ hub->tt.hub = hdev;
+ break;
+ case USB_HUB_PR_SS:
+ /* USB 3.0 hubs don't have a TT */
+ break;
+ default:
+ dev_dbg(hub_dev, "Unrecognized hub protocol %d\n",
+ hdev->descriptor.bDeviceProtocol);
+ break;
}
/* Note 8 FS bit times == (8 bits / 12000000 bps) ~= 666ns */
@@ -1360,7 +1360,6 @@
return -ENODEV;
}
-/* No BKL needed */
static int
hub_ioctl(struct usb_interface *intf, unsigned int code, void *user_data)
{
diff --git a/drivers/usb/core/usb.h b/drivers/usb/core/usb.h
index 3888778..45e8479 100644
--- a/drivers/usb/core/usb.h
+++ b/drivers/usb/core/usb.h
@@ -132,20 +132,6 @@
for_devices;
}
-/* translate USB error codes to codes user space understands */
-static inline int usb_translate_errors(int error_code)
-{
- switch (error_code) {
- case 0:
- case -ENOMEM:
- case -ENODEV:
- return error_code;
- default:
- return -EIO;
- }
-}
-
-
/* for labeling diagnostics */
extern const char *usbcore_name;
diff --git a/drivers/usb/dwc3/Kconfig b/drivers/usb/dwc3/Kconfig
index 3c1d67d..d8f741f 100644
--- a/drivers/usb/dwc3/Kconfig
+++ b/drivers/usb/dwc3/Kconfig
@@ -1,7 +1,10 @@
config USB_DWC3
tristate "DesignWare USB3 DRD Core Support"
- depends on (USB || USB_GADGET)
+ depends on (USB && USB_GADGET)
select USB_OTG_UTILS
+ select USB_GADGET_DUALSPEED
+ select USB_GADGET_SUPERSPEED
+ select USB_XHCI_PLATFORM
help
Say Y or M here if your system has a Dual Role SuperSpeed
USB controller based on the DesignWare USB3 IP Core.
diff --git a/drivers/usb/dwc3/Makefile b/drivers/usb/dwc3/Makefile
index 593d1dbc..900ae74 100644
--- a/drivers/usb/dwc3/Makefile
+++ b/drivers/usb/dwc3/Makefile
@@ -4,10 +4,8 @@
obj-$(CONFIG_USB_DWC3) += dwc3.o
dwc3-y := core.o
-
-ifneq ($(CONFIG_USB_GADGET_DWC3),)
- dwc3-y += gadget.o ep0.o
-endif
+dwc3-y += host.o
+dwc3-y += gadget.o ep0.o
ifneq ($(CONFIG_DEBUG_FS),)
dwc3-y += debugfs.o
diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
index 717ebc9..455bb1e 100644
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -59,6 +59,60 @@
#include "debug.h"
+static char *maximum_speed = "super";
+module_param(maximum_speed, charp, 0);
+MODULE_PARM_DESC(maximum_speed, "Maximum supported speed.");
+
+/* -------------------------------------------------------------------------- */
+
+#define DWC3_DEVS_POSSIBLE 32
+
+static DECLARE_BITMAP(dwc3_devs, DWC3_DEVS_POSSIBLE);
+
+int dwc3_get_device_id(void)
+{
+ int id;
+
+again:
+ id = find_first_zero_bit(dwc3_devs, DWC3_DEVS_POSSIBLE);
+ if (id < DWC3_DEVS_POSSIBLE) {
+ int old;
+
+ old = test_and_set_bit(id, dwc3_devs);
+ if (old)
+ goto again;
+ } else {
+ pr_err("dwc3: no space for new device\n");
+ id = -ENOMEM;
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(dwc3_get_device_id);
+
+void dwc3_put_device_id(int id)
+{
+ int ret;
+
+ if (id < 0)
+ return;
+
+ ret = test_bit(id, dwc3_devs);
+ WARN(!ret, "dwc3: ID %d not in use\n", id);
+ clear_bit(id, dwc3_devs);
+}
+EXPORT_SYMBOL_GPL(dwc3_put_device_id);
+
+void dwc3_set_mode(struct dwc3 *dwc, u32 mode)
+{
+ u32 reg;
+
+ reg = dwc3_readl(dwc->regs, DWC3_GCTL);
+ reg &= ~(DWC3_GCTL_PRTCAPDIR(DWC3_GCTL_PRTCAP_OTG));
+ reg |= DWC3_GCTL_PRTCAPDIR(mode);
+ dwc3_writel(dwc->regs, DWC3_GCTL, reg);
+}
+
/**
* dwc3_core_soft_reset - Issues core soft reset and PHY reset
* @dwc: pointer to our context structure
@@ -150,7 +204,7 @@
struct dwc3_event_buffer *evt;
int i;
- for (i = 0; i < DWC3_EVENT_BUFFERS_NUM; i++) {
+ for (i = 0; i < dwc->num_event_buffers; i++) {
evt = dwc->ev_buffs[i];
if (evt) {
dwc3_free_one_event_buffer(dwc, evt);
@@ -162,17 +216,25 @@
/**
* dwc3_alloc_event_buffers - Allocates @num event buffers of size @length
* @dwc: Pointer to out controller context structure
- * @num: number of event buffers to allocate
* @length: size of event buffer
*
* Returns 0 on success otherwise negative errno. In error the case, dwc
* may contain some buffers allocated but not all which were requested.
*/
-static int __devinit dwc3_alloc_event_buffers(struct dwc3 *dwc, unsigned num,
- unsigned length)
+static int __devinit dwc3_alloc_event_buffers(struct dwc3 *dwc, unsigned length)
{
+ int num;
int i;
+ num = DWC3_NUM_INT(dwc->hwparams.hwparams1);
+ dwc->num_event_buffers = num;
+
+ dwc->ev_buffs = kzalloc(sizeof(*dwc->ev_buffs) * num, GFP_KERNEL);
+ if (!dwc->ev_buffs) {
+ dev_err(dwc->dev, "can't allocate event buffers array\n");
+ return -ENOMEM;
+ }
+
for (i = 0; i < num; i++) {
struct dwc3_event_buffer *evt;
@@ -198,7 +260,7 @@
struct dwc3_event_buffer *evt;
int n;
- for (n = 0; n < DWC3_EVENT_BUFFERS_NUM; n++) {
+ for (n = 0; n < dwc->num_event_buffers; n++) {
evt = dwc->ev_buffs[n];
dev_dbg(dwc->dev, "Event buf %p dma %08llx length %d\n",
evt->buf, (unsigned long long) evt->dma,
@@ -221,7 +283,7 @@
struct dwc3_event_buffer *evt;
int n;
- for (n = 0; n < DWC3_EVENT_BUFFERS_NUM; n++) {
+ for (n = 0; n < dwc->num_event_buffers; n++) {
evt = dwc->ev_buffs[n];
dwc3_writel(dwc->regs, DWC3_GEVNTADRLO(n), 0);
dwc3_writel(dwc->regs, DWC3_GEVNTADRHI(n), 0);
@@ -285,8 +347,32 @@
cpu_relax();
} while (true);
- ret = dwc3_alloc_event_buffers(dwc, DWC3_EVENT_BUFFERS_NUM,
- DWC3_EVENT_BUFFERS_SIZE);
+ dwc3_cache_hwparams(dwc);
+
+ reg = dwc3_readl(dwc->regs, DWC3_GCTL);
+ reg &= ~DWC3_GCTL_SCALEDOWN(3);
+ reg &= ~DWC3_GCTL_DISSCRAMBLE;
+
+ switch (DWC3_GHWPARAMS1_EN_PWROPT(dwc->hwparams.hwparams1)) {
+ case DWC3_GHWPARAMS1_EN_PWROPT_CLK:
+ reg &= ~DWC3_GCTL_DSBLCLKGTNG;
+ break;
+ default:
+ dev_dbg(dwc->dev, "No power optimization available\n");
+ }
+
+ /*
+ * WORKAROUND: DWC3 revisions <1.90a have a bug
+ * when The device fails to connect at SuperSpeed
+ * and falls back to high-speed mode which causes
+ * the device to enter in a Connect/Disconnect loop
+ */
+ if (dwc->revision < DWC3_REVISION_190A)
+ reg |= DWC3_GCTL_U2RSTECN;
+
+ dwc3_writel(dwc->regs, DWC3_GCTL, reg);
+
+ ret = dwc3_alloc_event_buffers(dwc, DWC3_EVENT_BUFFERS_SIZE);
if (ret) {
dev_err(dwc->dev, "failed to allocate event buffers\n");
ret = -ENOMEM;
@@ -299,8 +385,6 @@
goto err1;
}
- dwc3_cache_hwparams(dwc);
-
return 0;
err1:
@@ -320,15 +404,17 @@
static int __devinit dwc3_probe(struct platform_device *pdev)
{
- const struct platform_device_id *id = platform_get_device_id(pdev);
struct resource *res;
struct dwc3 *dwc;
- void __iomem *regs;
- unsigned int features = id->driver_data;
+
int ret = -ENOMEM;
int irq;
+
+ void __iomem *regs;
void *mem;
+ u8 mode;
+
mem = kzalloc(sizeof(*dwc) + DWC3_ALIGN_MASK, GFP_KERNEL);
if (!mem) {
dev_err(&pdev->dev, "not enough memory\n");
@@ -343,6 +429,8 @@
goto err1;
}
+ dwc->res = res;
+
res = request_mem_region(res->start, resource_size(res),
dev_name(&pdev->dev));
if (!res) {
@@ -370,6 +458,17 @@
dwc->dev = &pdev->dev;
dwc->irq = irq;
+ if (!strncmp("super", maximum_speed, 5))
+ dwc->maximum_speed = DWC3_DCFG_SUPERSPEED;
+ else if (!strncmp("high", maximum_speed, 4))
+ dwc->maximum_speed = DWC3_DCFG_HIGHSPEED;
+ else if (!strncmp("full", maximum_speed, 4))
+ dwc->maximum_speed = DWC3_DCFG_FULLSPEED1;
+ else if (!strncmp("low", maximum_speed, 3))
+ dwc->maximum_speed = DWC3_DCFG_LOWSPEED;
+ else
+ dwc->maximum_speed = DWC3_DCFG_SUPERSPEED;
+
pm_runtime_enable(&pdev->dev);
pm_runtime_get_sync(&pdev->dev);
pm_runtime_forbid(&pdev->dev);
@@ -380,13 +479,44 @@
goto err3;
}
- if (features & DWC3_HAS_PERIPHERAL) {
+ mode = DWC3_MODE(dwc->hwparams.hwparams0);
+
+ switch (mode) {
+ case DWC3_MODE_DEVICE:
+ dwc3_set_mode(dwc, DWC3_GCTL_PRTCAP_DEVICE);
ret = dwc3_gadget_init(dwc);
if (ret) {
- dev_err(&pdev->dev, "failed to initialized gadget\n");
+ dev_err(&pdev->dev, "failed to initialize gadget\n");
goto err4;
}
+ break;
+ case DWC3_MODE_HOST:
+ dwc3_set_mode(dwc, DWC3_GCTL_PRTCAP_HOST);
+ ret = dwc3_host_init(dwc);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to initialize host\n");
+ goto err4;
+ }
+ break;
+ case DWC3_MODE_DRD:
+ dwc3_set_mode(dwc, DWC3_GCTL_PRTCAP_OTG);
+ ret = dwc3_host_init(dwc);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to initialize host\n");
+ goto err4;
+ }
+
+ ret = dwc3_gadget_init(dwc);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to initialize gadget\n");
+ goto err4;
+ }
+ break;
+ default:
+ dev_err(&pdev->dev, "Unsupported mode of operation %d\n", mode);
+ goto err4;
}
+ dwc->mode = mode;
ret = dwc3_debugfs_init(dwc);
if (ret) {
@@ -399,8 +529,21 @@
return 0;
err5:
- if (features & DWC3_HAS_PERIPHERAL)
+ switch (mode) {
+ case DWC3_MODE_DEVICE:
dwc3_gadget_exit(dwc);
+ break;
+ case DWC3_MODE_HOST:
+ dwc3_host_exit(dwc);
+ break;
+ case DWC3_MODE_DRD:
+ dwc3_host_exit(dwc);
+ dwc3_gadget_exit(dwc);
+ break;
+ default:
+ /* do nothing */
+ break;
+ }
err4:
dwc3_core_exit(dwc);
@@ -420,10 +563,8 @@
static int __devexit dwc3_remove(struct platform_device *pdev)
{
- const struct platform_device_id *id = platform_get_device_id(pdev);
struct dwc3 *dwc = platform_get_drvdata(pdev);
struct resource *res;
- unsigned int features = id->driver_data;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
@@ -432,8 +573,21 @@
dwc3_debugfs_exit(dwc);
- if (features & DWC3_HAS_PERIPHERAL)
+ switch (dwc->mode) {
+ case DWC3_MODE_DEVICE:
dwc3_gadget_exit(dwc);
+ break;
+ case DWC3_MODE_HOST:
+ dwc3_host_exit(dwc);
+ break;
+ case DWC3_MODE_DRD:
+ dwc3_host_exit(dwc);
+ dwc3_gadget_exit(dwc);
+ break;
+ default:
+ /* do nothing */
+ break;
+ }
dwc3_core_exit(dwc);
release_mem_region(res->start, resource_size(res));
@@ -443,30 +597,15 @@
return 0;
}
-static const struct platform_device_id dwc3_id_table[] __devinitconst = {
- {
- .name = "dwc3-omap",
- .driver_data = (DWC3_HAS_PERIPHERAL
- | DWC3_HAS_XHCI
- | DWC3_HAS_OTG),
- },
- {
- .name = "dwc3-pci",
- .driver_data = DWC3_HAS_PERIPHERAL,
- },
- { }, /* Terminating Entry */
-};
-MODULE_DEVICE_TABLE(platform, dwc3_id_table);
-
static struct platform_driver dwc3_driver = {
.probe = dwc3_probe,
.remove = __devexit_p(dwc3_remove),
.driver = {
.name = "dwc3",
},
- .id_table = dwc3_id_table,
};
+MODULE_ALIAS("platform:dwc3");
MODULE_AUTHOR("Felipe Balbi <balbi@ti.com>");
MODULE_LICENSE("Dual BSD/GPL");
MODULE_DESCRIPTION("DesignWare USB3 DRD Controller Driver");
diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
index 29a8e16..9e57f8e 100644
--- a/drivers/usb/dwc3/core.h
+++ b/drivers/usb/dwc3/core.h
@@ -41,6 +41,7 @@
#include <linux/device.h>
#include <linux/spinlock.h>
+#include <linux/ioport.h>
#include <linux/list.h>
#include <linux/dma-mapping.h>
#include <linux/mm.h>
@@ -52,7 +53,6 @@
/* Global constants */
#define DWC3_ENDPOINTS_NUM 32
-#define DWC3_EVENT_BUFFERS_NUM 2
#define DWC3_EVENT_BUFFERS_SIZE PAGE_SIZE
#define DWC3_EVENT_TYPE_MASK 0xfe
@@ -153,6 +153,7 @@
#define DWC3_GCTL_CLK_PIPEHALF (2)
#define DWC3_GCTL_CLK_MASK (3)
+#define DWC3_GCTL_PRTCAP(n) (((n) & (3 << 12)) >> 12)
#define DWC3_GCTL_PRTCAPDIR(n) (n << 12)
#define DWC3_GCTL_PRTCAP_HOST 1
#define DWC3_GCTL_PRTCAP_DEVICE 2
@@ -347,6 +348,7 @@
u32 free_slot;
u32 busy_slot;
const struct usb_endpoint_descriptor *desc;
+ const struct usb_ss_ep_comp_descriptor *comp_desc;
struct dwc3 *dwc;
unsigned flags;
@@ -536,6 +538,31 @@
u32 hwparams8;
};
+/* HWPARAMS0 */
+#define DWC3_MODE(n) ((n) & 0x7)
+
+#define DWC3_MODE_DEVICE 0
+#define DWC3_MODE_HOST 1
+#define DWC3_MODE_DRD 2
+#define DWC3_MODE_HUB 3
+
+/* HWPARAMS1 */
+#define DWC3_NUM_INT(n) (((n) & (0x3f << 15)) >> 15)
+
+struct dwc3_request {
+ struct usb_request request;
+ struct list_head list;
+ struct dwc3_ep *dep;
+
+ u8 epnum;
+ struct dwc3_trb_hw *trb;
+ dma_addr_t trb_dma;
+
+ unsigned direction:1;
+ unsigned mapped:1;
+ unsigned queued:1;
+};
+
/**
* struct dwc3 - representation of our controller
* @ctrl_req: usb control request which is used for ep0
@@ -549,19 +576,24 @@
* @ep0_bounce_addr: dma address of ep0_bounce
* @lock: for synchronizing
* @dev: pointer to our struct device
+ * @xhci: pointer to our xHCI child
* @event_buffer_list: a list of event buffers
* @gadget: device side representation of the peripheral controller
* @gadget_driver: pointer to the gadget driver
* @regs: base address for our registers
* @regs_size: address space size
* @irq: IRQ number
+ * @num_event_buffers: calculated number of event buffers
+ * @u1u2: only used on revisions <1.83a for workaround
+ * @maximum_speed: maximum speed requested (mainly for testing purposes)
* @revision: revision register contents
+ * @mode: mode of operation
* @is_selfpowered: true when we are selfpowered
* @three_stage_setup: set if we perform a three phase setup
- * @ep0_status_pending: ep0 status response without a req is pending
* @ep0_bounced: true when we used bounce buffer
* @ep0_expect_in: true when we expect a DATA IN transfer
* @start_config_issued: true when StartConfig command has been issued
+ * @setup_packet_pending: true when there's a Setup Packet in FIFO. Workaround
* @ep0_next_event: hold the next expected event
* @ep0state: state of endpoint zero
* @link_state: link state
@@ -579,12 +611,15 @@
dma_addr_t ep0_trb_addr;
dma_addr_t setup_buf_addr;
dma_addr_t ep0_bounce_addr;
- struct usb_request ep0_usb_req;
+ struct dwc3_request ep0_usb_req;
/* device lock */
spinlock_t lock;
struct device *dev;
- struct dwc3_event_buffer *ev_buffs[DWC3_EVENT_BUFFERS_NUM];
+ struct platform_device *xhci;
+ struct resource *res;
+
+ struct dwc3_event_buffer **ev_buffs;
struct dwc3_ep *eps[DWC3_ENDPOINTS_NUM];
struct usb_gadget gadget;
@@ -595,7 +630,11 @@
int irq;
+ u32 num_event_buffers;
+ u32 u1u2;
+ u32 maximum_speed;
u32 revision;
+ u32 mode;
#define DWC3_REVISION_173A 0x5533173a
#define DWC3_REVISION_175A 0x5533175a
@@ -607,10 +646,11 @@
unsigned is_selfpowered:1;
unsigned three_stage_setup:1;
- unsigned ep0_status_pending:1;
unsigned ep0_bounced:1;
unsigned ep0_expect_in:1;
unsigned start_config_issued:1;
+ unsigned setup_packet_pending:1;
+ unsigned delayed_status:1;
enum dwc3_ep0_next ep0_next_event;
enum dwc3_ep0_state ep0state;
@@ -765,4 +805,16 @@
#define DWC3_HAS_XHCI BIT(1)
#define DWC3_HAS_OTG BIT(3)
+/* prototypes */
+void dwc3_set_mode(struct dwc3 *dwc, u32 mode);
+
+int dwc3_host_init(struct dwc3 *dwc);
+void dwc3_host_exit(struct dwc3 *dwc);
+
+int dwc3_gadget_init(struct dwc3 *dwc);
+void dwc3_gadget_exit(struct dwc3 *dwc);
+
+extern int dwc3_get_device_id(void);
+extern void dwc3_put_device_id(int id);
+
#endif /* __DRIVERS_USB_DWC3_CORE_H */
diff --git a/drivers/usb/dwc3/debugfs.c b/drivers/usb/dwc3/debugfs.c
index da1ad77..87d403d 100644
--- a/drivers/usb/dwc3/debugfs.c
+++ b/drivers/usb/dwc3/debugfs.c
@@ -44,12 +44,12 @@
#include <linux/debugfs.h>
#include <linux/seq_file.h>
#include <linux/delay.h>
-
-#include <asm/uaccess.h>
+#include <linux/uaccess.h>
#include "core.h"
#include "gadget.h"
#include "io.h"
+#include "debug.h"
struct dwc3_register {
const char *name;
@@ -405,6 +405,75 @@
.release = single_release,
};
+static int dwc3_mode_show(struct seq_file *s, void *unused)
+{
+ struct dwc3 *dwc = s->private;
+ unsigned long flags;
+ u32 reg;
+
+ spin_lock_irqsave(&dwc->lock, flags);
+ reg = dwc3_readl(dwc->regs, DWC3_GCTL);
+ spin_unlock_irqrestore(&dwc->lock, flags);
+
+ switch (DWC3_GCTL_PRTCAP(reg)) {
+ case DWC3_GCTL_PRTCAP_HOST:
+ seq_printf(s, "host\n");
+ break;
+ case DWC3_GCTL_PRTCAP_DEVICE:
+ seq_printf(s, "device\n");
+ break;
+ case DWC3_GCTL_PRTCAP_OTG:
+ seq_printf(s, "OTG\n");
+ break;
+ default:
+ seq_printf(s, "UNKNOWN %08x\n", DWC3_GCTL_PRTCAP(reg));
+ }
+
+ return 0;
+}
+
+static int dwc3_mode_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, dwc3_mode_show, inode->i_private);
+}
+
+static ssize_t dwc3_mode_write(struct file *file,
+ const char __user *ubuf, size_t count, loff_t *ppos)
+{
+ struct seq_file *s = file->private_data;
+ struct dwc3 *dwc = s->private;
+ unsigned long flags;
+ u32 mode = 0;
+ char buf[32];
+
+ if (copy_from_user(&buf, ubuf, min_t(size_t, sizeof(buf) - 1, count)))
+ return -EFAULT;
+
+ if (!strncmp(buf, "host", 4))
+ mode |= DWC3_GCTL_PRTCAP_HOST;
+
+ if (!strncmp(buf, "device", 6))
+ mode |= DWC3_GCTL_PRTCAP_DEVICE;
+
+ if (!strncmp(buf, "otg", 3))
+ mode |= DWC3_GCTL_PRTCAP_OTG;
+
+ if (mode) {
+ spin_lock_irqsave(&dwc->lock, flags);
+ dwc3_set_mode(dwc, mode);
+ spin_unlock_irqrestore(&dwc->lock, flags);
+ }
+ return count;
+}
+
+static const struct file_operations dwc3_mode_fops = {
+ .open = dwc3_mode_open,
+ .write = dwc3_mode_write,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+};
+
int __devinit dwc3_debugfs_init(struct dwc3 *dwc)
{
struct dentry *root;
@@ -412,7 +481,7 @@
int ret;
root = debugfs_create_dir(dev_name(dwc->dev), NULL);
- if (IS_ERR(root)){
+ if (IS_ERR(root)) {
ret = PTR_ERR(root);
goto err0;
}
@@ -425,6 +494,14 @@
ret = PTR_ERR(file);
goto err1;
}
+
+ file = debugfs_create_file("mode", S_IRUGO | S_IWUSR, root,
+ dwc, &dwc3_mode_fops);
+ if (IS_ERR(file)) {
+ ret = PTR_ERR(file);
+ goto err1;
+ }
+
return 0;
err1:
diff --git a/drivers/usb/dwc3/dwc3-omap.c b/drivers/usb/dwc3/dwc3-omap.c
index 062552b..3274ac8 100644
--- a/drivers/usb/dwc3/dwc3-omap.c
+++ b/drivers/usb/dwc3/dwc3-omap.c
@@ -48,6 +48,7 @@
#include <linux/io.h>
#include <linux/module.h>
+#include "core.h"
#include "io.h"
/*
@@ -200,6 +201,7 @@
struct dwc3_omap *omap;
struct resource *res;
+ int devid;
int ret = -ENOMEM;
int irq;
@@ -236,16 +238,20 @@
goto err1;
}
- dwc3 = platform_device_alloc("dwc3-omap", -1);
+ devid = dwc3_get_device_id();
+ if (devid < 0)
+ goto err2;
+
+ dwc3 = platform_device_alloc("dwc3", devid);
if (!dwc3) {
dev_err(&pdev->dev, "couldn't allocate dwc3 device\n");
- goto err2;
+ goto err3;
}
context = kzalloc(resource_size(res), GFP_KERNEL);
if (!context) {
dev_err(&pdev->dev, "couldn't allocate dwc3 context memory\n");
- goto err3;
+ goto err4;
}
spin_lock_init(&omap->lock);
@@ -299,7 +305,7 @@
if (ret) {
dev_err(&pdev->dev, "failed to request IRQ #%d --> %d\n",
omap->irq, ret);
- goto err4;
+ goto err5;
}
/* enable all IRQs */
@@ -322,26 +328,29 @@
pdev->num_resources);
if (ret) {
dev_err(&pdev->dev, "couldn't add resources to dwc3 device\n");
- goto err5;
+ goto err6;
}
ret = platform_device_add(dwc3);
if (ret) {
dev_err(&pdev->dev, "failed to register dwc3 device\n");
- goto err5;
+ goto err6;
}
return 0;
-err5:
+err6:
free_irq(omap->irq, omap);
-err4:
+err5:
kfree(omap->context);
-err3:
+err4:
platform_device_put(dwc3);
+err3:
+ dwc3_put_device_id(devid);
+
err2:
iounmap(base);
@@ -358,6 +367,7 @@
platform_device_unregister(omap->dwc3);
+ dwc3_put_device_id(omap->dwc3->id);
free_irq(omap->irq, omap);
iounmap(omap->base);
@@ -384,18 +394,9 @@
},
};
+module_platform_driver(dwc3_omap_driver);
+
+MODULE_ALIAS("platform:omap-dwc3");
MODULE_AUTHOR("Felipe Balbi <balbi@ti.com>");
MODULE_LICENSE("Dual BSD/GPL");
MODULE_DESCRIPTION("DesignWare USB3 OMAP Glue Layer");
-
-static int __devinit dwc3_omap_init(void)
-{
- return platform_driver_register(&dwc3_omap_driver);
-}
-module_init(dwc3_omap_init);
-
-static void __exit dwc3_omap_exit(void)
-{
- platform_driver_unregister(&dwc3_omap_driver);
-}
-module_exit(dwc3_omap_exit);
diff --git a/drivers/usb/dwc3/dwc3-pci.c b/drivers/usb/dwc3/dwc3-pci.c
index f77c000..cd1429f 100644
--- a/drivers/usb/dwc3/dwc3-pci.c
+++ b/drivers/usb/dwc3/dwc3-pci.c
@@ -42,52 +42,17 @@
#include <linux/pci.h>
#include <linux/platform_device.h>
+#include "core.h"
+
/* FIXME define these in <linux/pci_ids.h> */
#define PCI_VENDOR_ID_SYNOPSYS 0x16c3
#define PCI_DEVICE_ID_SYNOPSYS_HAPSUSB3 0xabcd
-#define DWC3_PCI_DEVS_POSSIBLE 32
-
struct dwc3_pci {
struct device *dev;
struct platform_device *dwc3;
};
-static DECLARE_BITMAP(dwc3_pci_devs, DWC3_PCI_DEVS_POSSIBLE);
-
-static int dwc3_pci_get_device_id(struct dwc3_pci *glue)
-{
- int id;
-
-again:
- id = find_first_zero_bit(dwc3_pci_devs, DWC3_PCI_DEVS_POSSIBLE);
- if (id < DWC3_PCI_DEVS_POSSIBLE) {
- int old;
-
- old = test_and_set_bit(id, dwc3_pci_devs);
- if (old)
- goto again;
- } else {
- dev_err(glue->dev, "no space for new device\n");
- id = -ENOMEM;
- }
-
- return 0;
-}
-
-static void dwc3_pci_put_device_id(struct dwc3_pci *glue, int id)
-{
- int ret;
-
- if (id < 0)
- return;
-
- ret = test_bit(id, dwc3_pci_devs);
- WARN(!ret, "Device: %s\nID %d not in use\n",
- dev_driver_string(glue->dev), id);
- clear_bit(id, dwc3_pci_devs);
-}
-
static int __devinit dwc3_pci_probe(struct pci_dev *pci,
const struct pci_device_id *id)
{
@@ -114,11 +79,11 @@
pci_set_power_state(pci, PCI_D0);
pci_set_master(pci);
- devid = dwc3_pci_get_device_id(glue);
+ devid = dwc3_get_device_id();
if (devid < 0)
goto err2;
- dwc3 = platform_device_alloc("dwc3-pci", devid);
+ dwc3 = platform_device_alloc("dwc3", devid);
if (!dwc3) {
dev_err(&pci->dev, "couldn't allocate dwc3 device\n");
goto err3;
@@ -163,7 +128,7 @@
platform_device_put(dwc3);
err3:
- dwc3_pci_put_device_id(glue, devid);
+ dwc3_put_device_id(devid);
err2:
pci_disable_device(pci);
@@ -179,7 +144,7 @@
{
struct dwc3_pci *glue = pci_get_drvdata(pci);
- dwc3_pci_put_device_id(glue, glue->dwc3->id);
+ dwc3_put_device_id(glue->dwc3->id);
platform_device_unregister(glue->dwc3);
pci_set_drvdata(pci, NULL);
pci_disable_device(pci);
@@ -196,7 +161,7 @@
MODULE_DEVICE_TABLE(pci, dwc3_pci_id_table);
static struct pci_driver dwc3_pci_driver = {
- .name = "pci-dwc3",
+ .name = "dwc3-pci",
.id_table = dwc3_pci_id_table,
.probe = dwc3_pci_probe,
.remove = __devexit_p(dwc3_pci_remove),
diff --git a/drivers/usb/dwc3/ep0.c b/drivers/usb/dwc3/ep0.c
index 69a4e43..2f51de5 100644
--- a/drivers/usb/dwc3/ep0.c
+++ b/drivers/usb/dwc3/ep0.c
@@ -48,13 +48,13 @@
#include <linux/usb/ch9.h>
#include <linux/usb/gadget.h>
+#include <linux/usb/composite.h>
#include "core.h"
#include "gadget.h"
#include "io.h"
-static void dwc3_ep0_inspect_setup(struct dwc3 *dwc,
- const struct dwc3_event_depevt *event);
+static void dwc3_ep0_do_control_status(struct dwc3 *dwc, u32 epnum);
static const char *dwc3_ep0_state_string(enum dwc3_ep0_state state)
{
@@ -125,6 +125,8 @@
static int __dwc3_gadget_ep0_queue(struct dwc3_ep *dep,
struct dwc3_request *req)
{
+ struct dwc3 *dwc = dep->dwc;
+ u32 type;
int ret = 0;
req->request.actual = 0;
@@ -143,9 +145,7 @@
* IRQ we were waiting for is long gone.
*/
if (dep->flags & DWC3_EP_PENDING_REQUEST) {
- struct dwc3 *dwc = dep->dwc;
unsigned direction;
- u32 type;
direction = !!(dep->flags & DWC3_EP0_DIR_IN);
@@ -165,6 +165,13 @@
req->request.dma, req->request.length, type);
dep->flags &= ~(DWC3_EP_PENDING_REQUEST |
DWC3_EP0_DIR_IN);
+ } else if (dwc->delayed_status) {
+ dwc->delayed_status = false;
+
+ if (dwc->ep0state == EP0_STATUS_PHASE)
+ dwc3_ep0_do_control_status(dwc, 1);
+ else
+ dev_dbg(dwc->dev, "too early for delayed status\n");
}
return ret;
@@ -190,9 +197,7 @@
}
/* we share one TRB for ep0/1 */
- if (!list_empty(&dwc->eps[0]->request_list) ||
- !list_empty(&dwc->eps[1]->request_list) ||
- dwc->ep0_status_pending) {
+ if (!list_empty(&dep->request_list)) {
ret = -EBUSY;
goto out;
}
@@ -214,8 +219,9 @@
struct dwc3_ep *dep = dwc->eps[0];
/* stall is always issued on EP0 */
- __dwc3_gadget_ep_set_halt(dwc->eps[0], 1);
- dwc->eps[0]->flags = DWC3_EP_ENABLED;
+ __dwc3_gadget_ep_set_halt(dep, 1);
+ dep->flags = DWC3_EP_ENABLED;
+ dwc->delayed_status = false;
if (!list_empty(&dep->request_list)) {
struct dwc3_request *req;
@@ -254,17 +260,14 @@
return NULL;
}
-static void dwc3_ep0_send_status_response(struct dwc3 *dwc)
+static void dwc3_ep0_status_cmpl(struct usb_ep *ep, struct usb_request *req)
{
- dwc3_ep0_start_trans(dwc, 1, dwc->setup_buf_addr,
- dwc->ep0_usb_req.length,
- DWC3_TRBCTL_CONTROL_DATA);
}
-
/*
* ch 9.4.5
*/
-static int dwc3_ep0_handle_status(struct dwc3 *dwc, struct usb_ctrlrequest *ctrl)
+static int dwc3_ep0_handle_status(struct dwc3 *dwc,
+ struct usb_ctrlrequest *ctrl)
{
struct dwc3_ep *dep;
u32 recip;
@@ -291,7 +294,7 @@
case USB_RECIP_ENDPOINT:
dep = dwc3_wIndex_to_dep(dwc, ctrl->wIndex);
if (!dep)
- return -EINVAL;
+ return -EINVAL;
if (dep->flags & DWC3_EP_STALL)
usb_status = 1 << USB_ENDPOINT_HALT;
@@ -302,10 +305,14 @@
response_pkt = (__le16 *) dwc->setup_buf;
*response_pkt = cpu_to_le16(usb_status);
- dwc->ep0_usb_req.length = sizeof(*response_pkt);
- dwc->ep0_status_pending = 1;
- return 0;
+ dep = dwc->eps[0];
+ dwc->ep0_usb_req.dep = dep;
+ dwc->ep0_usb_req.request.length = sizeof(*response_pkt);
+ dwc->ep0_usb_req.request.dma = dwc->setup_buf_addr;
+ dwc->ep0_usb_req.request.complete = dwc3_ep0_status_cmpl;
+
+ return __dwc3_gadget_ep0_queue(dep, &dwc->ep0_usb_req);
}
static int dwc3_ep0_handle_feature(struct dwc3 *dwc,
@@ -396,8 +403,7 @@
case USB_RECIP_ENDPOINT:
switch (wValue) {
case USB_ENDPOINT_HALT:
-
- dep = dwc3_wIndex_to_dep(dwc, ctrl->wIndex);
+ dep = dwc3_wIndex_to_dep(dwc, wIndex);
if (!dep)
return -EINVAL;
ret = __dwc3_gadget_ep_set_halt(dep, set);
@@ -422,8 +428,15 @@
u32 reg;
addr = le16_to_cpu(ctrl->wValue);
- if (addr > 127)
+ if (addr > 127) {
+ dev_dbg(dwc->dev, "invalid device address %d\n", addr);
return -EINVAL;
+ }
+
+ if (dwc->dev_state == DWC3_CONFIGURED_STATE) {
+ dev_dbg(dwc->dev, "trying to set address when configured\n");
+ return -EINVAL;
+ }
reg = dwc3_readl(dwc->regs, DWC3_DCFG);
reg &= ~(DWC3_DCFG_DEVADDR_MASK);
@@ -473,8 +486,10 @@
if (!cfg)
dwc->dev_state = DWC3_ADDRESS_STATE;
break;
+ default:
+ ret = -EINVAL;
}
- return 0;
+ return ret;
}
static int dwc3_ep0_std_request(struct dwc3 *dwc, struct usb_ctrlrequest *ctrl)
@@ -537,6 +552,9 @@
else
ret = dwc3_ep0_delegate_req(dwc, ctrl);
+ if (ret == USB_GADGET_DELAYED_STATUS)
+ dwc->delayed_status = true;
+
if (ret >= 0)
return;
@@ -550,27 +568,21 @@
struct dwc3_request *r = NULL;
struct usb_request *ur;
struct dwc3_trb trb;
- struct dwc3_ep *dep;
+ struct dwc3_ep *ep0;
u32 transferred;
u8 epnum;
epnum = event->endpoint_number;
- dep = dwc->eps[epnum];
+ ep0 = dwc->eps[0];
dwc->ep0_next_event = DWC3_EP0_NRDY_STATUS;
- if (!dwc->ep0_status_pending) {
- r = next_request(&dwc->eps[0]->request_list);
- ur = &r->request;
- } else {
- ur = &dwc->ep0_usb_req;
- dwc->ep0_status_pending = 0;
- }
+ r = next_request(&ep0->request_list);
+ ur = &r->request;
dwc3_trb_to_nat(dwc->ep0_trb, &trb);
if (dwc->ep0_bounced) {
- struct dwc3_ep *ep0 = dwc->eps[0];
transferred = min_t(u32, ur->length,
ep0->endpoint.maxpacket - trb.length);
@@ -591,7 +603,7 @@
* seems to be case when req.length > maxpacket. Could it be?
*/
if (r)
- dwc3_gadget_giveback(dep, r, 0);
+ dwc3_gadget_giveback(ep0, r, 0);
}
}
@@ -619,6 +631,7 @@
struct dwc3_ep *dep = dwc->eps[event->endpoint_number];
dep->flags &= ~DWC3_EP_BUSY;
+ dwc->setup_packet_pending = false;
switch (dwc->ep0state) {
case EP0_SETUP_PHASE:
@@ -643,7 +656,6 @@
static void dwc3_ep0_do_control_setup(struct dwc3 *dwc,
const struct dwc3_event_depevt *event)
{
- dwc->ep0state = EP0_SETUP_PHASE;
dwc3_ep0_out_start(dwc);
}
@@ -655,12 +667,6 @@
int ret;
dep = dwc->eps[0];
- dwc->ep0state = EP0_DATA_PHASE;
-
- if (dwc->ep0_status_pending) {
- dwc3_ep0_send_status_response(dwc);
- return;
- }
if (list_empty(&dep->request_list)) {
dev_vdbg(dwc->dev, "pending request for EP0 Data phase\n");
@@ -674,7 +680,6 @@
req = next_request(&dep->request_list);
req->direction = !!event->endpoint_number;
- dwc->ep0state = EP0_DATA_PHASE;
if (req->request.length == 0) {
ret = dwc3_ep0_start_trans(dwc, event->endpoint_number,
dwc->ctrl_req_addr, 0,
@@ -706,35 +711,79 @@
WARN_ON(ret < 0);
}
-static void dwc3_ep0_do_control_status(struct dwc3 *dwc,
- const struct dwc3_event_depevt *event)
+static int dwc3_ep0_start_control_status(struct dwc3_ep *dep)
{
+ struct dwc3 *dwc = dep->dwc;
u32 type;
- int ret;
-
- dwc->ep0state = EP0_STATUS_PHASE;
type = dwc->three_stage_setup ? DWC3_TRBCTL_CONTROL_STATUS3
: DWC3_TRBCTL_CONTROL_STATUS2;
- ret = dwc3_ep0_start_trans(dwc, event->endpoint_number,
+ return dwc3_ep0_start_trans(dwc, dep->number,
dwc->ctrl_req_addr, 0, type);
+}
- WARN_ON(ret < 0);
+static void dwc3_ep0_do_control_status(struct dwc3 *dwc, u32 epnum)
+{
+ struct dwc3_ep *dep = dwc->eps[epnum];
+
+ WARN_ON(dwc3_ep0_start_control_status(dep));
}
static void dwc3_ep0_xfernotready(struct dwc3 *dwc,
const struct dwc3_event_depevt *event)
{
+ dwc->setup_packet_pending = true;
+
+ /*
+ * This part is very tricky: If we has just handled
+ * XferNotReady(Setup) and we're now expecting a
+ * XferComplete but, instead, we receive another
+ * XferNotReady(Setup), we should STALL and restart
+ * the state machine.
+ *
+ * In all other cases, we just continue waiting
+ * for the XferComplete event.
+ *
+ * We are a little bit unsafe here because we're
+ * not trying to ensure that last event was, indeed,
+ * XferNotReady(Setup).
+ *
+ * Still, we don't expect any condition where that
+ * should happen and, even if it does, it would be
+ * another error condition.
+ */
+ if (dwc->ep0_next_event == DWC3_EP0_COMPLETE) {
+ switch (event->status) {
+ case DEPEVT_STATUS_CONTROL_SETUP:
+ dev_vdbg(dwc->dev, "Unexpected XferNotReady(Setup)\n");
+ dwc3_ep0_stall_and_restart(dwc);
+ break;
+ case DEPEVT_STATUS_CONTROL_DATA:
+ /* FALLTHROUGH */
+ case DEPEVT_STATUS_CONTROL_STATUS:
+ /* FALLTHROUGH */
+ default:
+ dev_vdbg(dwc->dev, "waiting for XferComplete\n");
+ }
+
+ return;
+ }
+
switch (event->status) {
case DEPEVT_STATUS_CONTROL_SETUP:
dev_vdbg(dwc->dev, "Control Setup\n");
+
+ dwc->ep0state = EP0_SETUP_PHASE;
+
dwc3_ep0_do_control_setup(dwc, event);
break;
case DEPEVT_STATUS_CONTROL_DATA:
dev_vdbg(dwc->dev, "Control Data\n");
+ dwc->ep0state = EP0_DATA_PHASE;
+
if (dwc->ep0_next_event != DWC3_EP0_NRDY_DATA) {
dev_vdbg(dwc->dev, "Expected %d got %d\n",
dwc->ep0_next_event,
@@ -764,6 +813,8 @@
case DEPEVT_STATUS_CONTROL_STATUS:
dev_vdbg(dwc->dev, "Control Status\n");
+ dwc->ep0state = EP0_STATUS_PHASE;
+
if (dwc->ep0_next_event != DWC3_EP0_NRDY_STATUS) {
dev_vdbg(dwc->dev, "Expected %d got %d\n",
dwc->ep0_next_event,
@@ -772,12 +823,19 @@
dwc3_ep0_stall_and_restart(dwc);
return;
}
- dwc3_ep0_do_control_status(dwc, event);
+
+ if (dwc->delayed_status) {
+ WARN_ON_ONCE(event->endpoint_number != 1);
+ dev_vdbg(dwc->dev, "Mass Storage delayed status\n");
+ return;
+ }
+
+ dwc3_ep0_do_control_status(dwc, event->endpoint_number);
}
}
void dwc3_ep0_interrupt(struct dwc3 *dwc,
- const const struct dwc3_event_depevt *event)
+ const struct dwc3_event_depevt *event)
{
u8 epnum = event->endpoint_number;
diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index 25dbd86..026c53cf1 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -251,7 +251,8 @@
}
static int dwc3_gadget_set_ep_config(struct dwc3 *dwc, struct dwc3_ep *dep,
- const struct usb_endpoint_descriptor *desc)
+ const struct usb_endpoint_descriptor *desc,
+ const struct usb_ss_ep_comp_descriptor *comp_desc)
{
struct dwc3_gadget_ep_cmd_params params;
@@ -264,7 +265,8 @@
params.param1 = DWC3_DEPCFG_XFER_COMPLETE_EN
| DWC3_DEPCFG_XFER_NOT_READY_EN;
- if (usb_endpoint_xfer_bulk(desc) && dep->endpoint.max_streams) {
+ if (comp_desc && USB_SS_MAX_STREAMS(comp_desc->bmAttributes)
+ && usb_endpoint_xfer_bulk(desc)) {
params.param1 |= DWC3_DEPCFG_STREAM_CAPABLE
| DWC3_DEPCFG_STREAM_EVENT_EN;
dep->stream_capable = true;
@@ -317,7 +319,8 @@
* Caller should take care of locking
*/
static int __dwc3_gadget_ep_enable(struct dwc3_ep *dep,
- const struct usb_endpoint_descriptor *desc)
+ const struct usb_endpoint_descriptor *desc,
+ const struct usb_ss_ep_comp_descriptor *comp_desc)
{
struct dwc3 *dwc = dep->dwc;
u32 reg;
@@ -329,7 +332,7 @@
return ret;
}
- ret = dwc3_gadget_set_ep_config(dwc, dep, desc);
+ ret = dwc3_gadget_set_ep_config(dwc, dep, desc, comp_desc);
if (ret)
return ret;
@@ -343,6 +346,7 @@
return ret;
dep->desc = desc;
+ dep->comp_desc = comp_desc;
dep->type = usb_endpoint_type(desc);
dep->flags |= DWC3_EP_ENABLED;
@@ -405,6 +409,7 @@
dep->stream_capable = false;
dep->desc = NULL;
+ dep->comp_desc = NULL;
dep->type = 0;
dep->flags = 0;
@@ -473,7 +478,7 @@
dev_vdbg(dwc->dev, "Enabling %s\n", dep->name);
spin_lock_irqsave(&dwc->lock, flags);
- ret = __dwc3_gadget_ep_enable(dep, desc);
+ ret = __dwc3_gadget_ep_enable(dep, desc, ep->comp_desc);
spin_unlock_irqrestore(&dwc->lock, flags);
return ret;
@@ -745,8 +750,9 @@
dep->flags |= DWC3_EP_BUSY;
dep->res_trans_idx = dwc3_gadget_ep_get_transfer_index(dwc,
dep->number);
- if (!dep->res_trans_idx)
- printk_once(KERN_ERR "%s() res_trans_idx is invalid\n", __func__);
+
+ WARN_ON_ONCE(!dep->res_trans_idx);
+
return 0;
}
@@ -1155,35 +1161,9 @@
dwc->gadget_driver = driver;
dwc->gadget.dev.driver = &driver->driver;
- reg = dwc3_readl(dwc->regs, DWC3_GCTL);
-
- reg &= ~DWC3_GCTL_SCALEDOWN(3);
- reg &= ~DWC3_GCTL_PRTCAPDIR(DWC3_GCTL_PRTCAP_OTG);
- reg &= ~DWC3_GCTL_DISSCRAMBLE;
- reg |= DWC3_GCTL_PRTCAPDIR(DWC3_GCTL_PRTCAP_DEVICE);
-
- switch (DWC3_GHWPARAMS1_EN_PWROPT(dwc->hwparams.hwparams0)) {
- case DWC3_GHWPARAMS1_EN_PWROPT_CLK:
- reg &= ~DWC3_GCTL_DSBLCLKGTNG;
- break;
- default:
- dev_dbg(dwc->dev, "No power optimization available\n");
- }
-
- /*
- * WORKAROUND: DWC3 revisions <1.90a have a bug
- * when The device fails to connect at SuperSpeed
- * and falls back to high-speed mode which causes
- * the device to enter in a Connect/Disconnect loop
- */
- if (dwc->revision < DWC3_REVISION_190A)
- reg |= DWC3_GCTL_U2RSTECN;
-
- dwc3_writel(dwc->regs, DWC3_GCTL, reg);
-
reg = dwc3_readl(dwc->regs, DWC3_DCFG);
reg &= ~(DWC3_DCFG_SPEED_MASK);
- reg |= DWC3_DCFG_SUPERSPEED;
+ reg |= dwc->maximum_speed;
dwc3_writel(dwc->regs, DWC3_DCFG, reg);
dwc->start_config_issued = false;
@@ -1192,14 +1172,14 @@
dwc3_gadget_ep0_desc.wMaxPacketSize = cpu_to_le16(512);
dep = dwc->eps[0];
- ret = __dwc3_gadget_ep_enable(dep, &dwc3_gadget_ep0_desc);
+ ret = __dwc3_gadget_ep_enable(dep, &dwc3_gadget_ep0_desc, NULL);
if (ret) {
dev_err(dwc->dev, "failed to enable %s\n", dep->name);
goto err0;
}
dep = dwc->eps[1];
- ret = __dwc3_gadget_ep_enable(dep, &dwc3_gadget_ep0_desc);
+ ret = __dwc3_gadget_ep_enable(dep, &dwc3_gadget_ep0_desc, NULL);
if (ret) {
dev_err(dwc->dev, "failed to enable %s\n", dep->name);
goto err1;
@@ -1290,11 +1270,10 @@
&dwc->gadget.ep_list);
ret = dwc3_alloc_trb_pool(dep);
- if (ret) {
- dev_err(dwc->dev, "%s: failed to allocate TRB pool\n", dep->name);
+ if (ret)
return ret;
- }
}
+
INIT_LIST_HEAD(&dep->request_list);
INIT_LIST_HEAD(&dep->req_queued);
}
@@ -1334,8 +1313,10 @@
do {
req = next_request(&dep->req_queued);
- if (!req)
- break;
+ if (!req) {
+ WARN_ON_ONCE(1);
+ return 1;
+ }
dwc3_trb_to_nat(req->trb, &trb);
@@ -1400,6 +1381,31 @@
dep->flags &= ~DWC3_EP_BUSY;
dep->res_trans_idx = 0;
}
+
+ /*
+ * WORKAROUND: This is the 2nd half of U1/U2 -> U0 workaround.
+ * See dwc3_gadget_linksts_change_interrupt() for 1st half.
+ */
+ if (dwc->revision < DWC3_REVISION_183A) {
+ u32 reg;
+ int i;
+
+ for (i = 0; i < DWC3_ENDPOINTS_NUM; i++) {
+ struct dwc3_ep *dep = dwc->eps[i];
+
+ if (!(dep->flags & DWC3_EP_ENABLED))
+ continue;
+
+ if (!list_empty(&dep->req_queued))
+ return;
+ }
+
+ reg = dwc3_readl(dwc->regs, DWC3_DCTL);
+ reg |= dwc->u1u2;
+ dwc3_writel(dwc->regs, DWC3_DCTL, reg);
+
+ dwc->u1u2 = 0;
+ }
}
static void dwc3_gadget_start_isoc(struct dwc3 *dwc,
@@ -1639,6 +1645,7 @@
dwc->start_config_issued = false;
dwc->gadget.speed = USB_SPEED_UNKNOWN;
+ dwc->setup_packet_pending = false;
}
static void dwc3_gadget_usb3_phy_power(struct dwc3 *dwc, int on)
@@ -1675,6 +1682,37 @@
dev_vdbg(dwc->dev, "%s\n", __func__);
+ /*
+ * WORKAROUND: DWC3 revisions <1.88a have an issue which
+ * would cause a missing Disconnect Event if there's a
+ * pending Setup Packet in the FIFO.
+ *
+ * There's no suggested workaround on the official Bug
+ * report, which states that "unless the driver/application
+ * is doing any special handling of a disconnect event,
+ * there is no functional issue".
+ *
+ * Unfortunately, it turns out that we _do_ some special
+ * handling of a disconnect event, namely complete all
+ * pending transfers, notify gadget driver of the
+ * disconnection, and so on.
+ *
+ * Our suggested workaround is to follow the Disconnect
+ * Event steps here, instead, based on a setup_packet_pending
+ * flag. Such flag gets set whenever we have a XferNotReady
+ * event on EP0 and gets cleared on XferComplete for the
+ * same endpoint.
+ *
+ * Refers to:
+ *
+ * STAR#9000466709: RTL: Device : Disconnect event not
+ * generated if setup packet pending in FIFO
+ */
+ if (dwc->revision < DWC3_REVISION_188A) {
+ if (dwc->setup_packet_pending)
+ dwc3_gadget_disconnect_interrupt(dwc);
+ }
+
/* Enable PHYs */
dwc3_gadget_usb2_phy_power(dwc, true);
dwc3_gadget_usb3_phy_power(dwc, true);
@@ -1755,6 +1793,22 @@
switch (speed) {
case DWC3_DCFG_SUPERSPEED:
+ /*
+ * WORKAROUND: DWC3 revisions <1.90a have an issue which
+ * would cause a missing USB3 Reset event.
+ *
+ * In such situations, we should force a USB3 Reset
+ * event by calling our dwc3_gadget_reset_interrupt()
+ * routine.
+ *
+ * Refers to:
+ *
+ * STAR#9000483510: RTL: SS : USB3 reset event may
+ * not be generated always when the link enters poll
+ */
+ if (dwc->revision < DWC3_REVISION_190A)
+ dwc3_gadget_reset_interrupt(dwc);
+
dwc3_gadget_ep0_desc.wMaxPacketSize = cpu_to_le16(512);
dwc->gadget.ep0->maxpacket = 512;
dwc->gadget.speed = USB_SPEED_SUPER;
@@ -1781,14 +1835,14 @@
dwc3_gadget_disable_phy(dwc, dwc->gadget.speed);
dep = dwc->eps[0];
- ret = __dwc3_gadget_ep_enable(dep, &dwc3_gadget_ep0_desc);
+ ret = __dwc3_gadget_ep_enable(dep, &dwc3_gadget_ep0_desc, NULL);
if (ret) {
dev_err(dwc->dev, "failed to enable %s\n", dep->name);
return;
}
dep = dwc->eps[1];
- ret = __dwc3_gadget_ep_enable(dep, &dwc3_gadget_ep0_desc);
+ ret = __dwc3_gadget_ep_enable(dep, &dwc3_gadget_ep0_desc, NULL);
if (ret) {
dev_err(dwc->dev, "failed to enable %s\n", dep->name);
return;
@@ -1818,8 +1872,55 @@
static void dwc3_gadget_linksts_change_interrupt(struct dwc3 *dwc,
unsigned int evtinfo)
{
- /* The fith bit says SuperSpeed yes or no. */
- dwc->link_state = evtinfo & DWC3_LINK_STATE_MASK;
+ enum dwc3_link_state next = evtinfo & DWC3_LINK_STATE_MASK;
+
+ /*
+ * WORKAROUND: DWC3 Revisions <1.83a have an issue which, depending
+ * on the link partner, the USB session might do multiple entry/exit
+ * of low power states before a transfer takes place.
+ *
+ * Due to this problem, we might experience lower throughput. The
+ * suggested workaround is to disable DCTL[12:9] bits if we're
+ * transitioning from U1/U2 to U0 and enable those bits again
+ * after a transfer completes and there are no pending transfers
+ * on any of the enabled endpoints.
+ *
+ * This is the first half of that workaround.
+ *
+ * Refers to:
+ *
+ * STAR#9000446952: RTL: Device SS : if U1/U2 ->U0 takes >128us
+ * core send LGO_Ux entering U0
+ */
+ if (dwc->revision < DWC3_REVISION_183A) {
+ if (next == DWC3_LINK_STATE_U0) {
+ u32 u1u2;
+ u32 reg;
+
+ switch (dwc->link_state) {
+ case DWC3_LINK_STATE_U1:
+ case DWC3_LINK_STATE_U2:
+ reg = dwc3_readl(dwc->regs, DWC3_DCTL);
+ u1u2 = reg & (DWC3_DCTL_INITU2ENA
+ | DWC3_DCTL_ACCEPTU2ENA
+ | DWC3_DCTL_INITU1ENA
+ | DWC3_DCTL_ACCEPTU1ENA);
+
+ if (!dwc->u1u2)
+ dwc->u1u2 = reg & u1u2;
+
+ reg &= ~u1u2;
+
+ dwc3_writel(dwc->regs, DWC3_DCTL, reg);
+ break;
+ default:
+ /* do nothing */
+ break;
+ }
+ }
+ }
+
+ dwc->link_state = next;
dev_vdbg(dwc->dev, "%s link %d\n", __func__, dwc->link_state);
}
@@ -1925,7 +2026,7 @@
spin_lock(&dwc->lock);
- for (i = 0; i < DWC3_EVENT_BUFFERS_NUM; i++) {
+ for (i = 0; i < dwc->num_event_buffers; i++) {
irqreturn_t status;
status = dwc3_process_event_buf(dwc, i);
@@ -2076,7 +2177,6 @@
void dwc3_gadget_exit(struct dwc3 *dwc)
{
int irq;
- int i;
usb_del_gadget_udc(&dwc->gadget);
irq = platform_get_irq(to_platform_device(dwc->dev), 0);
@@ -2084,9 +2184,6 @@
dwc3_writel(dwc->regs, DWC3_DEVTEN, 0x00);
free_irq(irq, dwc);
- for (i = 0; i < ARRAY_SIZE(dwc->eps); i++)
- __dwc3_gadget_ep_disable(dwc->eps[i]);
-
dwc3_gadget_free_endpoints(dwc);
dma_free_coherent(dwc->dev, 512, dwc->ep0_bounce,
diff --git a/drivers/usb/dwc3/gadget.h b/drivers/usb/dwc3/gadget.h
index 71145a44..d97f467 100644
--- a/drivers/usb/dwc3/gadget.h
+++ b/drivers/usb/dwc3/gadget.h
@@ -79,19 +79,6 @@
/* -------------------------------------------------------------------------- */
-struct dwc3_request {
- struct usb_request request;
- struct list_head list;
- struct dwc3_ep *dep;
-
- u8 epnum;
- struct dwc3_trb_hw *trb;
- dma_addr_t trb_dma;
-
- unsigned direction:1;
- unsigned mapped:1;
- unsigned queued:1;
-};
#define to_dwc3_request(r) (container_of(r, struct dwc3_request, request))
static inline struct dwc3_request *next_request(struct list_head *list)
@@ -110,23 +97,11 @@
list_move_tail(&req->list, &dep->req_queued);
}
-#if defined(CONFIG_USB_GADGET_DWC3) || defined(CONFIG_USB_GADGET_DWC3_MODULE)
-int dwc3_gadget_init(struct dwc3 *dwc);
-void dwc3_gadget_exit(struct dwc3 *dwc);
-#else
-static inline int dwc3_gadget_init(struct dwc3 *dwc) { return 0; }
-static inline void dwc3_gadget_exit(struct dwc3 *dwc) { }
-static inline int dwc3_send_gadget_ep_cmd(struct dwc3 *dwc, unsigned ep,
- unsigned cmd, struct dwc3_gadget_ep_cmd_params *params)
-{
- return 0;
-}
-#endif
-
void dwc3_gadget_giveback(struct dwc3_ep *dep, struct dwc3_request *req,
int status);
-void dwc3_ep0_interrupt(struct dwc3 *dwc, const struct dwc3_event_depevt *event);
+void dwc3_ep0_interrupt(struct dwc3 *dwc,
+ const struct dwc3_event_depevt *event);
void dwc3_ep0_out_start(struct dwc3 *dwc);
int dwc3_gadget_ep0_queue(struct usb_ep *ep, struct usb_request *request,
gfp_t gfp_flags);
diff --git a/drivers/usb/dwc3/host.c b/drivers/usb/dwc3/host.c
new file mode 100644
index 0000000..7cfe211b
--- /dev/null
+++ b/drivers/usb/dwc3/host.c
@@ -0,0 +1,102 @@
+/**
+ * host.c - DesignWare USB3 DRD Controller Host Glue
+ *
+ * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com
+ *
+ * Authors: Felipe Balbi <balbi@ti.com>,
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions, and the following disclaimer,
+ * without modification.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 3. The names of the above-listed copyright holders may not be used
+ * to endorse or promote products derived from this software without
+ * specific prior written permission.
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2, as published by the Free
+ * Software Foundation.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
+ * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
+ * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+ * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
+ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <linux/platform_device.h>
+
+#include "core.h"
+
+static struct resource generic_resources[] = {
+ {
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+int dwc3_host_init(struct dwc3 *dwc)
+{
+ struct platform_device *xhci;
+ int ret;
+
+ xhci = platform_device_alloc("xhci", -1);
+ if (!xhci) {
+ dev_err(dwc->dev, "couldn't allocate xHCI device\n");
+ ret = -ENOMEM;
+ goto err0;
+ }
+
+ dma_set_coherent_mask(&xhci->dev, dwc->dev->coherent_dma_mask);
+
+ xhci->dev.parent = dwc->dev;
+ xhci->dev.dma_mask = dwc->dev->dma_mask;
+ xhci->dev.dma_parms = dwc->dev->dma_parms;
+
+ dwc->xhci = xhci;
+
+ /* setup resources */
+ generic_resources[0].start = dwc->irq;
+
+ generic_resources[1].start = dwc->res->start;
+ generic_resources[1].end = dwc->res->start + 0x7fff;
+
+ ret = platform_device_add_resources(xhci, generic_resources,
+ ARRAY_SIZE(generic_resources));
+ if (ret) {
+ dev_err(dwc->dev, "couldn't add resources to xHCI device\n");
+ goto err1;
+ }
+
+ ret = platform_device_add(xhci);
+ if (ret) {
+ dev_err(dwc->dev, "failed to register xHCI device\n");
+ goto err1;
+ }
+
+ return 0;
+
+err1:
+ platform_device_put(xhci);
+
+err0:
+ return ret;
+}
+
+void dwc3_host_exit(struct dwc3 *dwc)
+{
+ platform_device_unregister(dwc->xhci);
+}
diff --git a/drivers/usb/dwc3/io.h b/drivers/usb/dwc3/io.h
index bc957db..071d561 100644
--- a/drivers/usb/dwc3/io.h
+++ b/drivers/usb/dwc3/io.h
@@ -39,7 +39,7 @@
#ifndef __DRIVERS_USB_DWC3_IO_H
#define __DRIVERS_USB_DWC3_IO_H
-#include <asm/io.h>
+#include <linux/io.h>
static inline u32 dwc3_readl(void __iomem *base, u32 offset)
{
diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig
index 23a4473..71108c2 100644
--- a/drivers/usb/gadget/Kconfig
+++ b/drivers/usb/gadget/Kconfig
@@ -15,6 +15,7 @@
menuconfig USB_GADGET
tristate "USB Gadget Support"
+ select NLS
help
USB is a master/slave protocol, organized with one master
host (such as a PC) controlling up to 127 peripheral devices.
@@ -318,18 +319,6 @@
PXA9xx Processor series include a high speed USB2.0 device
controller, which support high speed and full speed USB peripheral.
-config USB_GADGET_DWC3
- tristate "DesignWare USB3.0 (DRD) Controller"
- depends on USB_DWC3
- select USB_GADGET_DUALSPEED
- select USB_GADGET_SUPERSPEED
- help
- DesignWare USB3.0 controller is a SuperSpeed USB3.0 Controller
- which can be configured for peripheral-only, host-only, hub-only
- and Dual-Role operation. This Controller was first integrated into
- the OMAP5 series of processors. More information about the OMAP5
- version of this controller, refer to http://www.ti.com/omap5.
-
#
# Controllers available in both integrated and discrete versions
#
diff --git a/drivers/usb/gadget/fsl_qe_udc.c b/drivers/usb/gadget/fsl_qe_udc.c
index e00cf92..f75c56a 100644
--- a/drivers/usb/gadget/fsl_qe_udc.c
+++ b/drivers/usb/gadget/fsl_qe_udc.c
@@ -2814,20 +2814,7 @@
#endif
};
-static int __init qe_udc_init(void)
-{
- printk(KERN_INFO "%s: %s, %s\n", driver_name, driver_desc,
- DRIVER_VERSION);
- return platform_driver_register(&udc_driver);
-}
-
-static void __exit qe_udc_exit(void)
-{
- platform_driver_unregister(&udc_driver);
-}
-
-module_init(qe_udc_init);
-module_exit(qe_udc_exit);
+module_platform_driver(udc_driver);
MODULE_DESCRIPTION(DRIVER_DESC);
MODULE_AUTHOR(DRIVER_AUTHOR);
diff --git a/drivers/usb/gadget/mv_udc_core.c b/drivers/usb/gadget/mv_udc_core.c
index 8924121..0114fd3 100644
--- a/drivers/usb/gadget/mv_udc_core.c
+++ b/drivers/usb/gadget/mv_udc_core.c
@@ -2463,24 +2463,11 @@
#endif
},
};
-MODULE_ALIAS("platform:pxa-u2o");
+
+module_platform_driver(udc_driver);
MODULE_DESCRIPTION(DRIVER_DESC);
MODULE_AUTHOR("Chao Xie <chao.xie@marvell.com>");
MODULE_VERSION(DRIVER_VERSION);
MODULE_LICENSE("GPL");
-
-
-static int __init init(void)
-{
- return platform_driver_register(&udc_driver);
-}
-module_init(init);
-
-
-static void __exit cleanup(void)
-{
- platform_driver_unregister(&udc_driver);
-}
-module_exit(cleanup);
-
+MODULE_ALIAS("platform:pxa-u2o");
diff --git a/drivers/usb/gadget/s3c-hsotg.c b/drivers/usb/gadget/s3c-hsotg.c
index b314482..c59156c 100644
--- a/drivers/usb/gadget/s3c-hsotg.c
+++ b/drivers/usb/gadget/s3c-hsotg.c
@@ -3467,18 +3467,7 @@
.resume = s3c_hsotg_resume,
};
-static int __init s3c_hsotg_modinit(void)
-{
- return platform_driver_register(&s3c_hsotg_driver);
-}
-
-static void __exit s3c_hsotg_modexit(void)
-{
- platform_driver_unregister(&s3c_hsotg_driver);
-}
-
-module_init(s3c_hsotg_modinit);
-module_exit(s3c_hsotg_modexit);
+module_platform_driver(s3c_hsotg_driver);
MODULE_DESCRIPTION("Samsung S3C USB High-speed/OtG device");
MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>");
diff --git a/drivers/usb/gadget/s3c-hsudc.c b/drivers/usb/gadget/s3c-hsudc.c
index 20a553b..787ac5b 100644
--- a/drivers/usb/gadget/s3c-hsudc.c
+++ b/drivers/usb/gadget/s3c-hsudc.c
@@ -1377,21 +1377,10 @@
},
.probe = s3c_hsudc_probe,
};
-MODULE_ALIAS("platform:s3c-hsudc");
-static int __init s3c_hsudc_modinit(void)
-{
- return platform_driver_register(&s3c_hsudc_driver);
-}
-
-static void __exit s3c_hsudc_modexit(void)
-{
- platform_driver_unregister(&s3c_hsudc_driver);
-}
-
-module_init(s3c_hsudc_modinit);
-module_exit(s3c_hsudc_modexit);
+module_platform_driver(s3c_hsudc_driver);
MODULE_DESCRIPTION("Samsung S3C24XX USB high-speed controller driver");
MODULE_AUTHOR("Thomas Abraham <thomas.ab@samsung.com>");
MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:s3c-hsudc");
diff --git a/drivers/usb/gadget/usbstring.c b/drivers/usb/gadget/usbstring.c
index 58c4d37..4d25b90 100644
--- a/drivers/usb/gadget/usbstring.c
+++ b/drivers/usb/gadget/usbstring.c
@@ -13,82 +13,17 @@
#include <linux/string.h>
#include <linux/device.h>
#include <linux/init.h>
+#include <linux/nls.h>
#include <linux/usb/ch9.h>
#include <linux/usb/gadget.h>
-#include <asm/unaligned.h>
-
-
-static int utf8_to_utf16le(const char *s, __le16 *cp, unsigned len)
-{
- int count = 0;
- u8 c;
- u16 uchar;
-
- /* this insists on correct encodings, though not minimal ones.
- * BUT it currently rejects legit 4-byte UTF-8 code points,
- * which need surrogate pairs. (Unicode 3.1 can use them.)
- */
- while (len != 0 && (c = (u8) *s++) != 0) {
- if (unlikely(c & 0x80)) {
- // 2-byte sequence:
- // 00000yyyyyxxxxxx = 110yyyyy 10xxxxxx
- if ((c & 0xe0) == 0xc0) {
- uchar = (c & 0x1f) << 6;
-
- c = (u8) *s++;
- if ((c & 0xc0) != 0x80)
- goto fail;
- c &= 0x3f;
- uchar |= c;
-
- // 3-byte sequence (most CJKV characters):
- // zzzzyyyyyyxxxxxx = 1110zzzz 10yyyyyy 10xxxxxx
- } else if ((c & 0xf0) == 0xe0) {
- uchar = (c & 0x0f) << 12;
-
- c = (u8) *s++;
- if ((c & 0xc0) != 0x80)
- goto fail;
- c &= 0x3f;
- uchar |= c << 6;
-
- c = (u8) *s++;
- if ((c & 0xc0) != 0x80)
- goto fail;
- c &= 0x3f;
- uchar |= c;
-
- /* no bogus surrogates */
- if (0xd800 <= uchar && uchar <= 0xdfff)
- goto fail;
-
- // 4-byte sequence (surrogate pairs, currently rare):
- // 11101110wwwwzzzzyy + 110111yyyyxxxxxx
- // = 11110uuu 10uuzzzz 10yyyyyy 10xxxxxx
- // (uuuuu = wwww + 1)
- // FIXME accept the surrogate code points (only)
-
- } else
- goto fail;
- } else
- uchar = c;
- put_unaligned_le16(uchar, cp++);
- count++;
- len--;
- }
- return count;
-fail:
- return -1;
-}
-
/**
* usb_gadget_get_string - fill out a string descriptor
* @table: of c strings encoded using UTF-8
* @id: string id, from low byte of wValue in get string descriptor
- * @buf: at least 256 bytes
+ * @buf: at least 256 bytes, must be 16-bit aligned
*
* Finds the UTF-8 string matching the ID, and converts it into a
* string descriptor in utf16-le.
@@ -125,8 +60,8 @@
/* string descriptors have length, tag, then UTF16-LE text */
len = min ((size_t) 126, strlen (s->s));
- memset (buf + 2, 0, 2 * len); /* zero all the bytes */
- len = utf8_to_utf16le(s->s, (__le16 *)&buf[2], len);
+ len = utf8s_to_utf16s(s->s, len, UTF16_LITTLE_ENDIAN,
+ (wchar_t *) &buf[2], 126);
if (len < 0)
return -EINVAL;
buf [0] = (len + 1) * 2;
diff --git a/drivers/usb/host/ehci-au1xxx.c b/drivers/usb/host/ehci-au1xxx.c
index 18bafa9..bf7441a 100644
--- a/drivers/usb/host/ehci-au1xxx.c
+++ b/drivers/usb/host/ehci-au1xxx.c
@@ -23,6 +23,7 @@
int ret = ehci_init(hcd);
ehci->need_io_watchdog = 0;
+ ehci_reset(ehci);
return ret;
}
diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
index 3ff9f82..c4c76ab 100644
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -48,6 +48,10 @@
#include <asm/system.h>
#include <asm/unaligned.h>
+#if defined(CONFIG_PPC_PS3)
+#include <asm/firmware.h>
+#endif
+
/*-------------------------------------------------------------------------*/
/*
@@ -230,12 +234,58 @@
STS_HALT, STS_HALT, 16 * 125);
}
+#if defined(CONFIG_USB_SUSPEND) && defined(CONFIG_PPC_PS3)
+
+/*
+ * The EHCI controller of the Cell Super Companion Chip used in the
+ * PS3 will stop the root hub after all root hub ports are suspended.
+ * When in this condition handshake will return -ETIMEDOUT. The
+ * STS_HLT bit will not be set, so inspection of the frame index is
+ * used here to test for the condition. If the condition is found
+ * return success to allow the USB suspend to complete.
+ */
+
+static int handshake_for_broken_root_hub(struct ehci_hcd *ehci,
+ void __iomem *ptr, u32 mask, u32 done,
+ int usec)
+{
+ unsigned int old_index;
+ int error;
+
+ if (!firmware_has_feature(FW_FEATURE_PS3_LV1))
+ return -ETIMEDOUT;
+
+ old_index = ehci_read_frame_index(ehci);
+
+ error = handshake(ehci, ptr, mask, done, usec);
+
+ if (error == -ETIMEDOUT && ehci_read_frame_index(ehci) == old_index)
+ return 0;
+
+ return error;
+}
+
+#else
+
+static int handshake_for_broken_root_hub(struct ehci_hcd *ehci,
+ void __iomem *ptr, u32 mask, u32 done,
+ int usec)
+{
+ return -ETIMEDOUT;
+}
+
+#endif
+
static int handshake_on_error_set_halt(struct ehci_hcd *ehci, void __iomem *ptr,
u32 mask, u32 done, int usec)
{
int error;
error = handshake(ehci, ptr, mask, done, usec);
+ if (error == -ETIMEDOUT)
+ error = handshake_for_broken_root_hub(ehci, ptr, mask, done,
+ usec);
+
if (error) {
ehci_halt(ehci);
ehci->rh_state = EHCI_RH_HALTED;
@@ -620,6 +670,7 @@
hw = ehci->async->hw;
hw->hw_next = QH_NEXT(ehci, ehci->async->qh_dma);
hw->hw_info1 = cpu_to_hc32(ehci, QH_HEAD);
+ hw->hw_info1 |= cpu_to_hc32(ehci, (1 << 7)); /* I = 1 */
hw->hw_token = cpu_to_hc32(ehci, QTD_STS_HALT);
hw->hw_qtd_next = EHCI_LIST_END(ehci);
ehci->async->qh_state = QH_STATE_LINKED;
@@ -677,22 +728,13 @@
static int ehci_run (struct usb_hcd *hcd)
{
struct ehci_hcd *ehci = hcd_to_ehci (hcd);
- int retval;
u32 temp;
u32 hcc_params;
hcd->uses_new_polling = 1;
/* EHCI spec section 4.1 */
- /*
- * TDI driver does the ehci_reset in their reset callback.
- * Don't reset here, because configuration settings will
- * vanish.
- */
- if (!ehci_is_TDI(ehci) && (retval = ehci_reset(ehci)) != 0) {
- ehci_mem_cleanup(ehci);
- return retval;
- }
+
ehci_writel(ehci, ehci->periodic_dma, &ehci->regs->frame_list);
ehci_writel(ehci, (u32)ehci->async->qh_dma, &ehci->regs->async_next);
@@ -1324,7 +1366,7 @@
#define PLATFORM_DRIVER ehci_pxa168_driver
#endif
-#ifdef CONFIG_NLM_XLR
+#ifdef CONFIG_CPU_XLR
#include "ehci-xls.c"
#define PLATFORM_DRIVER ehci_xls_driver
#endif
diff --git a/drivers/usb/host/ehci-octeon.c b/drivers/usb/host/ehci-octeon.c
index ba1f513..c010488 100644
--- a/drivers/usb/host/ehci-octeon.c
+++ b/drivers/usb/host/ehci-octeon.c
@@ -155,6 +155,8 @@
/* cache this readonly data; minimize chip reads */
ehci->hcs_params = ehci_readl(ehci, &ehci->caps->hcs_params);
+ ehci_reset(ehci);
+
ret = usb_add_hcd(hcd, irq, IRQF_SHARED);
if (ret) {
dev_dbg(&pdev->dev, "failed to add hcd with err %d\n", ret);
diff --git a/drivers/usb/host/ehci-omap.c b/drivers/usb/host/ehci-omap.c
index e39b029..e33baf9 100644
--- a/drivers/usb/host/ehci-omap.c
+++ b/drivers/usb/host/ehci-omap.c
@@ -228,6 +228,8 @@
/* cache this readonly data; minimize chip reads */
omap_ehci->hcs_params = readl(&omap_ehci->caps->hcs_params);
+ ehci_reset(omap_ehci);
+
ret = usb_add_hcd(hcd, irq, IRQF_SHARED);
if (ret) {
dev_err(dev, "failed to add hcd with err %d\n", ret);
diff --git a/drivers/usb/host/ehci-ps3.c b/drivers/usb/host/ehci-ps3.c
index 2dc32da..a20e496 100644
--- a/drivers/usb/host/ehci-ps3.c
+++ b/drivers/usb/host/ehci-ps3.c
@@ -21,6 +21,34 @@
#include <asm/firmware.h>
#include <asm/ps3.h>
+static void ps3_ehci_setup_insnreg(struct ehci_hcd *ehci)
+{
+ /* PS3 HC internal setup register offsets. */
+
+ enum ps3_ehci_hc_insnreg {
+ ps3_ehci_hc_insnreg01 = 0x084,
+ ps3_ehci_hc_insnreg02 = 0x088,
+ ps3_ehci_hc_insnreg03 = 0x08c,
+ };
+
+ /* PS3 EHCI HC errata fix 316 - The PS3 EHCI HC will reset its
+ * internal INSNREGXX setup regs back to the chip default values
+ * on Host Controller Reset (CMD_RESET) or Light Host Controller
+ * Reset (CMD_LRESET). The work-around for this is for the HC
+ * driver to re-initialise these regs when ever the HC is reset.
+ */
+
+ /* Set burst transfer counts to 256 out, 32 in. */
+
+ writel_be(0x01000020, (void __iomem *)ehci->regs +
+ ps3_ehci_hc_insnreg01);
+
+ /* Enable burst transfer counts. */
+
+ writel_be(0x00000001, (void __iomem *)ehci->regs +
+ ps3_ehci_hc_insnreg03);
+}
+
static int ps3_ehci_hc_reset(struct usb_hcd *hcd)
{
int result;
@@ -49,6 +77,8 @@
ehci_reset(ehci);
+ ps3_ehci_setup_insnreg(ehci);
+
return result;
}
diff --git a/drivers/usb/host/ehci-pxa168.c b/drivers/usb/host/ehci-pxa168.c
index ac0c16e..8d0e7a2 100644
--- a/drivers/usb/host/ehci-pxa168.c
+++ b/drivers/usb/host/ehci-pxa168.c
@@ -299,7 +299,7 @@
ehci = hcd_to_ehci(hcd);
ehci->caps = hcd->regs + 0x100;
ehci->regs = hcd->regs + 0x100 +
- HC_LENGTH(ehci_readl(ehci, &ehci->caps->hc_capbase));
+ HC_LENGTH(ehci, ehci_readl(ehci, &ehci->caps->hc_capbase));
ehci->hcs_params = ehci_readl(ehci, &ehci->caps->hcs_params);
hcd->has_tt = 1;
ehci->sbrn = 0x20;
diff --git a/drivers/usb/host/ehci-q.c b/drivers/usb/host/ehci-q.c
index 4e4066c..36ca507 100644
--- a/drivers/usb/host/ehci-q.c
+++ b/drivers/usb/host/ehci-q.c
@@ -373,6 +373,17 @@
retry_xacterr:
if ((token & QTD_STS_ACTIVE) == 0) {
+ /* Report Data Buffer Error: non-fatal but useful */
+ if (token & QTD_STS_DBE)
+ ehci_dbg(ehci,
+ "detected DataBufferErr for urb %p ep%d%s len %d, qtd %p [qh %p]\n",
+ urb,
+ usb_endpoint_num(&urb->ep->desc),
+ usb_endpoint_dir_in(&urb->ep->desc) ? "in" : "out",
+ urb->transfer_buffer_length,
+ qtd,
+ qh);
+
/* on STALL, error, and short reads this urb must
* complete and all its qtds must be recycled.
*/
@@ -647,7 +658,7 @@
/*
* data transfer stage: buffer setup
*/
- i = urb->num_sgs;
+ i = urb->num_mapped_sgs;
if (len > 0 && i > 0) {
sg = urb->sg;
buf = sg_dma_address(sg);
diff --git a/drivers/usb/host/ehci-s5p.c b/drivers/usb/host/ehci-s5p.c
index 024b65c..293f741 100644
--- a/drivers/usb/host/ehci-s5p.c
+++ b/drivers/usb/host/ehci-s5p.c
@@ -14,8 +14,6 @@
#include <linux/clk.h>
#include <linux/platform_device.h>
-#include <mach/regs-pmu.h>
-#include <plat/cpu.h>
#include <plat/ehci.h>
#include <plat/usb-phy.h>
@@ -136,6 +134,8 @@
/* cache this readonly data; minimize chip reads */
ehci->hcs_params = readl(&ehci->caps->hcs_params);
+ ehci_reset(ehci);
+
err = usb_add_hcd(hcd, irq, IRQF_SHARED);
if (err) {
dev_err(&pdev->dev, "Failed to add USB HCD\n");
diff --git a/drivers/usb/host/ehci-vt8500.c b/drivers/usb/host/ehci-vt8500.c
index 54d1ab8..c1eda73 100644
--- a/drivers/usb/host/ehci-vt8500.c
+++ b/drivers/usb/host/ehci-vt8500.c
@@ -132,6 +132,8 @@
ehci_port_power(ehci, 1);
+ ehci_reset(ehci);
+
ret = usb_add_hcd(hcd, pdev->resource[1].start,
IRQF_SHARED);
if (ret == 0) {
diff --git a/drivers/usb/host/ehci-w90x900.c b/drivers/usb/host/ehci-w90x900.c
index d661cf7..3d2e26c 100644
--- a/drivers/usb/host/ehci-w90x900.c
+++ b/drivers/usb/host/ehci-w90x900.c
@@ -78,6 +78,8 @@
if (irq < 0)
goto err4;
+ ehci_reset(ehci);
+
retval = usb_add_hcd(hcd, irq, IRQF_SHARED);
if (retval != 0)
goto err4;
diff --git a/drivers/usb/host/ehci-xls.c b/drivers/usb/host/ehci-xls.c
index b4fb511..72f0819 100644
--- a/drivers/usb/host/ehci-xls.c
+++ b/drivers/usb/host/ehci-xls.c
@@ -69,7 +69,7 @@
}
hcd->rsrc_start = res->start;
- hcd->rsrc_len = res->end - res->start + 1;
+ hcd->rsrc_len = resource_size(res);
if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len,
driver->description)) {
diff --git a/drivers/usb/host/fhci-hcd.c b/drivers/usb/host/fhci-hcd.c
index 4ed6d19..d262374 100644
--- a/drivers/usb/host/fhci-hcd.c
+++ b/drivers/usb/host/fhci-hcd.c
@@ -824,17 +824,7 @@
.remove = __devexit_p(of_fhci_remove),
};
-static int __init fhci_module_init(void)
-{
- return platform_driver_register(&of_fhci_driver);
-}
-module_init(fhci_module_init);
-
-static void __exit fhci_module_exit(void)
-{
- platform_driver_unregister(&of_fhci_driver);
-}
-module_exit(fhci_module_exit);
+module_platform_driver(of_fhci_driver);
MODULE_DESCRIPTION("USB Freescale Host Controller Interface Driver");
MODULE_AUTHOR("Shlomi Gridish <gridish@freescale.com>, "
diff --git a/drivers/usb/host/fsl-mph-dr-of.c b/drivers/usb/host/fsl-mph-dr-of.c
index 9037035..7916e56 100644
--- a/drivers/usb/host/fsl-mph-dr-of.c
+++ b/drivers/usb/host/fsl-mph-dr-of.c
@@ -297,17 +297,7 @@
.remove = __devexit_p(fsl_usb2_mph_dr_of_remove),
};
-static int __init fsl_usb2_mph_dr_init(void)
-{
- return platform_driver_register(&fsl_usb2_mph_dr_driver);
-}
-module_init(fsl_usb2_mph_dr_init);
-
-static void __exit fsl_usb2_mph_dr_exit(void)
-{
- platform_driver_unregister(&fsl_usb2_mph_dr_driver);
-}
-module_exit(fsl_usb2_mph_dr_exit);
+module_platform_driver(fsl_usb2_mph_dr_driver);
MODULE_DESCRIPTION("FSL MPH DR OF devices driver");
MODULE_AUTHOR("Anatolij Gustschin <agust@denx.de>");
diff --git a/drivers/usb/host/hwa-hc.c b/drivers/usb/host/hwa-hc.c
index 9bfac65..565d79f 100644
--- a/drivers/usb/host/hwa-hc.c
+++ b/drivers/usb/host/hwa-hc.c
@@ -776,7 +776,6 @@
goto error_alloc;
}
usb_hcd->wireless = 1;
- set_bit(HCD_FLAG_SAW_IRQ, &usb_hcd->flags);
wusbhc = usb_hcd_to_wusbhc(usb_hcd);
hwahc = container_of(wusbhc, struct hwahc, wusbhc);
hwahc_init(hwahc);
diff --git a/drivers/usb/host/imx21-hcd.c b/drivers/usb/host/imx21-hcd.c
index 2ee18cf..6923bcb 100644
--- a/drivers/usb/host/imx21-hcd.c
+++ b/drivers/usb/host/imx21-hcd.c
@@ -1924,18 +1924,7 @@
.resume = NULL,
};
-static int __init imx21_hcd_init(void)
-{
- return platform_driver_register(&imx21_hcd_driver);
-}
-
-static void __exit imx21_hcd_cleanup(void)
-{
- platform_driver_unregister(&imx21_hcd_driver);
-}
-
-module_init(imx21_hcd_init);
-module_exit(imx21_hcd_cleanup);
+module_platform_driver(imx21_hcd_driver);
MODULE_DESCRIPTION("i.MX21 USB Host controller");
MODULE_AUTHOR("Martin Fuzzey");
diff --git a/drivers/usb/host/isp1760-hcd.c b/drivers/usb/host/isp1760-hcd.c
index 27dfab8..fc72d44 100644
--- a/drivers/usb/host/isp1760-hcd.c
+++ b/drivers/usb/host/isp1760-hcd.c
@@ -32,6 +32,13 @@
static struct kmem_cache *qh_cachep;
static struct kmem_cache *urb_listitem_cachep;
+enum queue_head_types {
+ QH_CONTROL,
+ QH_BULK,
+ QH_INTERRUPT,
+ QH_END
+};
+
struct isp1760_hcd {
u32 hcs_params;
spinlock_t lock;
@@ -40,7 +47,7 @@
struct slotinfo int_slots[32];
int int_done_map;
struct memory_chunk memory_pool[BLOCKS];
- struct list_head controlqhs, bulkqhs, interruptqhs;
+ struct list_head qh_list[QH_END];
/* periodic schedule support */
#define DEFAULT_I_TDPS 1024
@@ -406,12 +413,12 @@
{
struct isp1760_hcd *priv = hcd_to_priv(hcd);
u32 hcc_params;
+ int i;
spin_lock_init(&priv->lock);
- INIT_LIST_HEAD(&priv->interruptqhs);
- INIT_LIST_HEAD(&priv->controlqhs);
- INIT_LIST_HEAD(&priv->bulkqhs);
+ for (i = 0; i < QH_END; i++)
+ INIT_LIST_HEAD(&priv->qh_list[i]);
/*
* hw default: 1K periodic list heads, one per frame.
@@ -930,9 +937,9 @@
struct isp1760_hcd *priv;
struct isp1760_qh *qh, *qh_next;
struct list_head *ep_queue;
- struct usb_host_endpoint *ep;
LIST_HEAD(urb_list);
struct urb_listitem *urb_listitem, *urb_listitem_next;
+ int i;
if (!hcd) {
WARN_ON(1);
@@ -944,28 +951,13 @@
/*
* check finished/retired xfers, transfer payloads, call urb_done()
*/
- ep_queue = &priv->interruptqhs;
- while (ep_queue) {
+ for (i = 0; i < QH_END; i++) {
+ ep_queue = &priv->qh_list[i];
list_for_each_entry_safe(qh, qh_next, ep_queue, qh_list) {
- ep = list_entry(qh->qtd_list.next, struct isp1760_qtd,
- qtd_list)->urb->ep;
collect_qtds(hcd, qh, &urb_list);
- if (list_empty(&qh->qtd_list)) {
+ if (list_empty(&qh->qtd_list))
list_del(&qh->qh_list);
- if (ep->hcpriv == NULL) {
- /* Endpoint has been disabled, so we
- can free the associated queue head. */
- qh_free(qh);
- }
- }
}
-
- if (ep_queue == &priv->interruptqhs)
- ep_queue = &priv->controlqhs;
- else if (ep_queue == &priv->controlqhs)
- ep_queue = &priv->bulkqhs;
- else
- ep_queue = NULL;
}
list_for_each_entry_safe(urb_listitem, urb_listitem_next, &urb_list,
@@ -998,17 +990,10 @@
*
* I'm sure this scheme could be improved upon!
*/
- ep_queue = &priv->controlqhs;
- while (ep_queue) {
+ for (i = 0; i < QH_END; i++) {
+ ep_queue = &priv->qh_list[i];
list_for_each_entry_safe(qh, qh_next, ep_queue, qh_list)
enqueue_qtds(hcd, qh);
-
- if (ep_queue == &priv->controlqhs)
- ep_queue = &priv->interruptqhs;
- else if (ep_queue == &priv->interruptqhs)
- ep_queue = &priv->bulkqhs;
- else
- ep_queue = NULL;
}
}
@@ -1543,16 +1528,16 @@
switch (usb_pipetype(urb->pipe)) {
case PIPE_CONTROL:
- ep_queue = &priv->controlqhs;
+ ep_queue = &priv->qh_list[QH_CONTROL];
break;
case PIPE_BULK:
- ep_queue = &priv->bulkqhs;
+ ep_queue = &priv->qh_list[QH_BULK];
break;
case PIPE_INTERRUPT:
if (urb->interval < 0)
return -EINVAL;
/* FIXME: Check bandwidth */
- ep_queue = &priv->interruptqhs;
+ ep_queue = &priv->qh_list[QH_INTERRUPT];
break;
case PIPE_ISOCHRONOUS:
dev_err(hcd->self.controller, "%s: isochronous USB packets "
@@ -1714,8 +1699,8 @@
{
struct isp1760_hcd *priv = hcd_to_priv(hcd);
unsigned long spinflags;
- struct isp1760_qh *qh;
- struct isp1760_qtd *qtd;
+ struct isp1760_qh *qh, *qh_iter;
+ int i;
spin_lock_irqsave(&priv->lock, spinflags);
@@ -1723,14 +1708,17 @@
if (!qh)
goto out;
- list_for_each_entry(qtd, &qh->qtd_list, qtd_list)
- if (qtd->status != QTD_RETIRE) {
- dequeue_urb_from_qtd(hcd, qh, qtd);
- qtd->urb->status = -ECONNRESET;
- }
+ WARN_ON(!list_empty(&qh->qtd_list));
+ for (i = 0; i < QH_END; i++)
+ list_for_each_entry(qh_iter, &priv->qh_list[i], qh_list)
+ if (qh_iter == qh) {
+ list_del(&qh_iter->qh_list);
+ i = QH_END;
+ break;
+ }
+ qh_free(qh);
ep->hcpriv = NULL;
- /* Cannot free qh here since it will be parsed by schedule_ptds() */
schedule_ptds(hcd);
diff --git a/drivers/usb/host/isp1760-if.c b/drivers/usb/host/isp1760-if.c
index a7dc1e1..b605224 100644
--- a/drivers/usb/host/isp1760-if.c
+++ b/drivers/usb/host/isp1760-if.c
@@ -47,9 +47,9 @@
int virq;
resource_size_t res_len;
int ret;
- const unsigned int *prop;
unsigned int devflags = 0;
enum of_gpio_flags gpio_flags;
+ u32 bus_width = 0;
drvdata = kzalloc(sizeof(*drvdata), GFP_KERNEL);
if (!drvdata)
@@ -77,8 +77,8 @@
devflags |= ISP1760_FLAG_ISP1761;
/* Some systems wire up only 16 of the 32 data lines */
- prop = of_get_property(dp, "bus-width", NULL);
- if (prop && *prop == 16)
+ of_property_read_u32(dp, "bus-width", &bus_width);
+ if (bus_width == 16)
devflags |= ISP1760_FLAG_BUS_WIDTH_16;
if (of_get_property(dp, "port1-otg", NULL) != NULL)
diff --git a/drivers/usb/host/ohci-au1xxx.c b/drivers/usb/host/ohci-au1xxx.c
index 9b66df8..40d886a 100644
--- a/drivers/usb/host/ohci-au1xxx.c
+++ b/drivers/usb/host/ohci-au1xxx.c
@@ -173,12 +173,9 @@
* mark HW unaccessible, bail out if RH has been resumed. Use
* the spinlock to properly synchronize with possible pending
* RH suspend or resume activity.
- *
- * This is still racy as hcd->state is manipulated outside of
- * any locks =P But that will be a different fix.
*/
spin_lock_irqsave(&ohci->lock, flags);
- if (hcd->state != HC_STATE_SUSPENDED) {
+ if (ohci->rh_state != OHCI_RH_SUSPENDED) {
rc = -EINVAL;
goto bail;
}
diff --git a/drivers/usb/host/ohci-dbg.c b/drivers/usb/host/ohci-dbg.c
index d7d3449..5179fcd 100644
--- a/drivers/usb/host/ohci-dbg.c
+++ b/drivers/usb/host/ohci-dbg.c
@@ -127,6 +127,19 @@
return "?";
}
+static const char *rh_state_string(struct ohci_hcd *ohci)
+{
+ switch (ohci->rh_state) {
+ case OHCI_RH_HALTED:
+ return "halted";
+ case OHCI_RH_SUSPENDED:
+ return "suspended";
+ case OHCI_RH_RUNNING:
+ return "running";
+ }
+ return "?";
+}
+
// dump control and status registers
static void
ohci_dump_status (struct ohci_hcd *controller, char **next, unsigned *size)
@@ -136,9 +149,10 @@
temp = ohci_readl (controller, ®s->revision) & 0xff;
ohci_dbg_sw (controller, next, size,
- "OHCI %d.%d, %s legacy support registers\n",
+ "OHCI %d.%d, %s legacy support registers, rh state %s\n",
0x03 & (temp >> 4), (temp & 0x0f),
- (temp & 0x0100) ? "with" : "NO");
+ (temp & 0x0100) ? "with" : "NO",
+ rh_state_string(controller));
temp = ohci_readl (controller, ®s->control);
ohci_dbg_sw (controller, next, size,
diff --git a/drivers/usb/host/ohci-ep93xx.c b/drivers/usb/host/ohci-ep93xx.c
index dc45d48..3d63574 100644
--- a/drivers/usb/host/ohci-ep93xx.c
+++ b/drivers/usb/host/ohci-ep93xx.c
@@ -179,8 +179,6 @@
ohci->next_statechange = jiffies;
ep93xx_stop_hc(&pdev->dev);
- hcd->state = HC_STATE_SUSPENDED;
-
return 0;
}
diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c
index b263919..4fa5d8c 100644
--- a/drivers/usb/host/ohci-hcd.c
+++ b/drivers/usb/host/ohci-hcd.c
@@ -209,7 +209,7 @@
retval = -ENODEV;
goto fail;
}
- if (!HC_IS_RUNNING(hcd->state)) {
+ if (ohci->rh_state != OHCI_RH_RUNNING) {
retval = -ENODEV;
goto fail;
}
@@ -274,7 +274,7 @@
rc = usb_hcd_check_unlink_urb(hcd, urb, status);
if (rc) {
; /* Do nothing */
- } else if (HC_IS_RUNNING(hcd->state)) {
+ } else if (ohci->rh_state == OHCI_RH_RUNNING) {
urb_priv_t *urb_priv;
/* Unless an IRQ completed the unlink while it was being
@@ -321,7 +321,7 @@
rescan:
spin_lock_irqsave (&ohci->lock, flags);
- if (!HC_IS_RUNNING (hcd->state)) {
+ if (ohci->rh_state != OHCI_RH_RUNNING) {
sanitize:
ed->state = ED_IDLE;
if (quirk_zfmicro(ohci) && ed->type == PIPE_INTERRUPT)
@@ -377,6 +377,7 @@
ohci->hc_control = ohci_readl (ohci, &ohci->regs->control);
ohci->hc_control &= OHCI_CTRL_RWC;
ohci_writel (ohci, ohci->hc_control, &ohci->regs->control);
+ ohci->rh_state = OHCI_RH_HALTED;
}
/* ohci_shutdown forcibly disables IRQs and DMA, helping kexec and
@@ -500,7 +501,7 @@
if (distrust_firmware)
ohci->flags |= OHCI_QUIRK_HUB_POWER;
- disable (ohci);
+ ohci->rh_state = OHCI_RH_HALTED;
ohci->regs = hcd->regs;
/* REVISIT this BIOS handshake is now moved into PCI "quirks", and
@@ -575,7 +576,7 @@
int first = ohci->fminterval == 0;
struct usb_hcd *hcd = ohci_to_hcd(ohci);
- disable (ohci);
+ ohci->rh_state = OHCI_RH_HALTED;
/* boot firmware should have set this up (5.1.1.3.1) */
if (first) {
@@ -688,7 +689,7 @@
ohci->hc_control &= OHCI_CTRL_RWC;
ohci->hc_control |= OHCI_CONTROL_INIT | OHCI_USB_OPER;
ohci_writel (ohci, ohci->hc_control, &ohci->regs->control);
- hcd->state = HC_STATE_RUNNING;
+ ohci->rh_state = OHCI_RH_RUNNING;
/* wake on ConnectStatusChange, matching external hubs */
ohci_writel (ohci, RH_HS_DRWE, &ohci->regs->roothub.status);
@@ -725,7 +726,6 @@
// POTPGT delay is bits 24-31, in 2 ms units.
mdelay ((val >> 23) & 0x1fe);
- hcd->state = HC_STATE_RUNNING;
if (quirk_zfmicro(ohci)) {
/* Create timer to watch for bad queue state on ZF Micro */
@@ -761,7 +761,7 @@
* of dead, unclocked, or unplugged (CardBus...) devices
*/
if (ints == ~(u32)0) {
- disable (ohci);
+ ohci->rh_state = OHCI_RH_HALTED;
ohci_dbg (ohci, "device removed!\n");
usb_hc_died(hcd);
return IRQ_HANDLED;
@@ -771,7 +771,7 @@
ints &= ohci_readl(ohci, ®s->intrenable);
/* interrupt for some other device? */
- if (ints == 0 || unlikely(hcd->state == HC_STATE_HALT))
+ if (ints == 0 || unlikely(ohci->rh_state == OHCI_RH_HALTED))
return IRQ_NOTMINE;
if (ints & OHCI_INTR_UE) {
@@ -786,8 +786,8 @@
schedule_work (&ohci->nec_work);
} else {
- disable (ohci);
ohci_err (ohci, "OHCI Unrecoverable Error, disabled\n");
+ ohci->rh_state = OHCI_RH_HALTED;
usb_hc_died(hcd);
}
@@ -871,11 +871,11 @@
if ((ints & OHCI_INTR_SF) != 0
&& !ohci->ed_rm_list
&& !ohci->ed_to_check
- && HC_IS_RUNNING(hcd->state))
+ && ohci->rh_state == OHCI_RH_RUNNING)
ohci_writel (ohci, OHCI_INTR_SF, ®s->intrdisable);
spin_unlock (&ohci->lock);
- if (HC_IS_RUNNING(hcd->state)) {
+ if (ohci->rh_state == OHCI_RH_RUNNING) {
ohci_writel (ohci, ints, ®s->intrstatus);
ohci_writel (ohci, OHCI_INTR_MIE, ®s->intrenable);
// flush those writes
@@ -929,7 +929,7 @@
struct urb_priv *priv;
spin_lock_irq(&ohci->lock);
- disable (ohci);
+ ohci->rh_state = OHCI_RH_HALTED;
/* Recycle any "live" eds/tds (and urbs). */
if (!list_empty (&ohci->pending))
@@ -1111,7 +1111,7 @@
#define PLATFORM_DRIVER ohci_hcd_ath79_driver
#endif
-#ifdef CONFIG_NLM_XLR
+#ifdef CONFIG_CPU_XLR
#include "ohci-xls.c"
#define PLATFORM_DRIVER ohci_xls_driver
#endif
diff --git a/drivers/usb/host/ohci-hub.c b/drivers/usb/host/ohci-hub.c
index 2f00040..836772d 100644
--- a/drivers/usb/host/ohci-hub.c
+++ b/drivers/usb/host/ohci-hub.c
@@ -111,6 +111,7 @@
if (!autostop) {
ohci->next_statechange = jiffies + msecs_to_jiffies (5);
ohci->autostop = 0;
+ ohci->rh_state = OHCI_RH_SUSPENDED;
}
done:
@@ -140,7 +141,7 @@
if (ohci->hc_control & (OHCI_CTRL_IR | OHCI_SCHED_ENABLES)) {
/* this can happen after resuming a swsusp snapshot */
- if (hcd->state == HC_STATE_RESUMING) {
+ if (ohci->rh_state != OHCI_RH_RUNNING) {
ohci_dbg (ohci, "BIOS/SMM active, control %03x\n",
ohci->hc_control);
status = -EBUSY;
@@ -274,6 +275,7 @@
(void) ohci_readl (ohci, &ohci->regs->control);
}
+ ohci->rh_state = OHCI_RH_RUNNING;
return 0;
}
@@ -336,11 +338,8 @@
/* If needed, reinitialize and suspend the root hub */
if (need_reinit) {
spin_lock_irq(&ohci->lock);
- hcd->state = HC_STATE_RESUMING;
ohci_rh_resume(ohci);
- hcd->state = HC_STATE_QUIESCING;
ohci_rh_suspend(ohci, 0);
- hcd->state = HC_STATE_SUSPENDED;
spin_unlock_irq(&ohci->lock);
}
diff --git a/drivers/usb/host/ohci-omap.c b/drivers/usb/host/ohci-omap.c
index e4b8782..db39686 100644
--- a/drivers/usb/host/ohci-omap.c
+++ b/drivers/usb/host/ohci-omap.c
@@ -516,7 +516,6 @@
ohci->next_statechange = jiffies;
omap_ohci_clock_power(0);
- ohci_to_hcd(ohci)->state = HC_STATE_SUSPENDED;
return 0;
}
diff --git a/drivers/usb/host/ohci-pci.c b/drivers/usb/host/ohci-pci.c
index bc01b06..6109810 100644
--- a/drivers/usb/host/ohci-pci.c
+++ b/drivers/usb/host/ohci-pci.c
@@ -308,12 +308,9 @@
* mark HW unaccessible, bail out if RH has been resumed. Use
* the spinlock to properly synchronize with possible pending
* RH suspend or resume activity.
- *
- * This is still racy as hcd->state is manipulated outside of
- * any locks =P But that will be a different fix.
*/
spin_lock_irqsave (&ohci->lock, flags);
- if (hcd->state != HC_STATE_SUSPENDED) {
+ if (ohci->rh_state != OHCI_RH_SUSPENDED) {
rc = -EINVAL;
goto bail;
}
diff --git a/drivers/usb/host/ohci-pxa27x.c b/drivers/usb/host/ohci-pxa27x.c
index 29dfefe..6313e44 100644
--- a/drivers/usb/host/ohci-pxa27x.c
+++ b/drivers/usb/host/ohci-pxa27x.c
@@ -502,8 +502,6 @@
ohci->ohci.next_statechange = jiffies;
pxa27x_stop_hc(ohci, dev);
- hcd->state = HC_STATE_SUSPENDED;
-
return 0;
}
diff --git a/drivers/usb/host/ohci-q.c b/drivers/usb/host/ohci-q.c
index 15dc51d..c5a1ea9 100644
--- a/drivers/usb/host/ohci-q.c
+++ b/drivers/usb/host/ohci-q.c
@@ -912,7 +912,7 @@
/* only take off EDs that the HC isn't using, accounting for
* frame counter wraps and EDs with partially retired TDs
*/
- if (likely (HC_IS_RUNNING(ohci_to_hcd(ohci)->state))) {
+ if (likely(ohci->rh_state == OHCI_RH_RUNNING)) {
if (tick_before (tick, ed->tick)) {
skip_ed:
last = &ed->ed_next;
@@ -1012,7 +1012,7 @@
/* but if there's work queued, reschedule */
if (!list_empty (&ed->td_list)) {
- if (HC_IS_RUNNING(ohci_to_hcd(ohci)->state))
+ if (ohci->rh_state == OHCI_RH_RUNNING)
ed_schedule (ohci, ed);
}
@@ -1021,9 +1021,7 @@
}
/* maybe reenable control and bulk lists */
- if (HC_IS_RUNNING(ohci_to_hcd(ohci)->state)
- && ohci_to_hcd(ohci)->state != HC_STATE_QUIESCING
- && !ohci->ed_rm_list) {
+ if (ohci->rh_state == OHCI_RH_RUNNING && !ohci->ed_rm_list) {
u32 command = 0, control = 0;
if (ohci->ed_controltail) {
diff --git a/drivers/usb/host/ohci-s3c2410.c b/drivers/usb/host/ohci-s3c2410.c
index a1877c4..56dcf06 100644
--- a/drivers/usb/host/ohci-s3c2410.c
+++ b/drivers/usb/host/ohci-s3c2410.c
@@ -486,15 +486,66 @@
return 0;
}
+#ifdef CONFIG_PM
+static int ohci_hcd_s3c2410_drv_suspend(struct device *dev)
+{
+ struct usb_hcd *hcd = dev_get_drvdata(dev);
+ struct ohci_hcd *ohci = hcd_to_ohci(hcd);
+ struct platform_device *pdev = to_platform_device(dev);
+ unsigned long flags;
+ int rc = 0;
+
+ /*
+ * Root hub was already suspended. Disable irq emission and
+ * mark HW unaccessible, bail out if RH has been resumed. Use
+ * the spinlock to properly synchronize with possible pending
+ * RH suspend or resume activity.
+ */
+ spin_lock_irqsave(&ohci->lock, flags);
+ if (ohci->rh_state != OHCI_RH_SUSPENDED) {
+ rc = -EINVAL;
+ goto bail;
+ }
+
+ clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
+
+ s3c2410_stop_hc(pdev);
+bail:
+ spin_unlock_irqrestore(&ohci->lock, flags);
+
+ return rc;
+}
+
+static int ohci_hcd_s3c2410_drv_resume(struct device *dev)
+{
+ struct usb_hcd *hcd = dev_get_drvdata(dev);
+ struct platform_device *pdev = to_platform_device(dev);
+
+ s3c2410_start_hc(pdev, hcd);
+
+ set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
+ ohci_finish_controller_resume(hcd);
+
+ return 0;
+}
+#else
+#define ohci_hcd_s3c2410_drv_suspend NULL
+#define ohci_hcd_s3c2410_drv_resume NULL
+#endif
+
+static const struct dev_pm_ops ohci_hcd_s3c2410_pm_ops = {
+ .suspend = ohci_hcd_s3c2410_drv_suspend,
+ .resume = ohci_hcd_s3c2410_drv_resume,
+};
+
static struct platform_driver ohci_hcd_s3c2410_driver = {
.probe = ohci_hcd_s3c2410_drv_probe,
.remove = __devexit_p(ohci_hcd_s3c2410_drv_remove),
.shutdown = usb_hcd_platform_shutdown,
- /*.suspend = ohci_hcd_s3c2410_drv_suspend, */
- /*.resume = ohci_hcd_s3c2410_drv_resume, */
.driver = {
.owner = THIS_MODULE,
.name = "s3c2410-ohci",
+ .pm = &ohci_hcd_s3c2410_pm_ops,
},
};
diff --git a/drivers/usb/host/ohci-sh.c b/drivers/usb/host/ohci-sh.c
index afc4eb6..84686d9 100644
--- a/drivers/usb/host/ohci-sh.c
+++ b/drivers/usb/host/ohci-sh.c
@@ -29,7 +29,6 @@
ohci_hcd_init(ohci);
ohci_init(ohci);
ohci_run(ohci);
- hcd->state = HC_STATE_RUNNING;
return 0;
}
diff --git a/drivers/usb/host/ohci-sm501.c b/drivers/usb/host/ohci-sm501.c
index 968cea2..5596ac2 100644
--- a/drivers/usb/host/ohci-sm501.c
+++ b/drivers/usb/host/ohci-sm501.c
@@ -224,7 +224,6 @@
ohci->next_statechange = jiffies;
sm501_unit_power(dev->parent, SM501_GATE_USB_HOST, 0);
- ohci_to_hcd(ohci)->state = HC_STATE_SUSPENDED;
return 0;
}
diff --git a/drivers/usb/host/ohci-spear.c b/drivers/usb/host/ohci-spear.c
index 6987465..95c1648 100644
--- a/drivers/usb/host/ohci-spear.c
+++ b/drivers/usb/host/ohci-spear.c
@@ -203,7 +203,6 @@
ohci->next_statechange = jiffies;
spear_stop_ohci(ohci_p);
- ohci_to_hcd(ohci)->state = HC_STATE_SUSPENDED;
return 0;
}
diff --git a/drivers/usb/host/ohci-tmio.c b/drivers/usb/host/ohci-tmio.c
index 06331d9..120bfe6 100644
--- a/drivers/usb/host/ohci-tmio.c
+++ b/drivers/usb/host/ohci-tmio.c
@@ -318,9 +318,6 @@
if (ret)
return ret;
}
-
- hcd->state = HC_STATE_SUSPENDED;
-
return 0;
}
diff --git a/drivers/usb/host/ohci-xls.c b/drivers/usb/host/ohci-xls.c
index a3a9c6f..a224786 100644
--- a/drivers/usb/host/ohci-xls.c
+++ b/drivers/usb/host/ohci-xls.c
@@ -40,7 +40,7 @@
goto err1;
}
hcd->rsrc_start = res->start;
- hcd->rsrc_len = res->end - res->start + 1;
+ hcd->rsrc_len = resource_size(res);
if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len,
driver->description)) {
diff --git a/drivers/usb/host/ohci.h b/drivers/usb/host/ohci.h
index 0795b93..8ff6f7e 100644
--- a/drivers/usb/host/ohci.h
+++ b/drivers/usb/host/ohci.h
@@ -344,6 +344,12 @@
* a subset of what the full implementation needs. (Linus)
*/
+enum ohci_rh_state {
+ OHCI_RH_HALTED,
+ OHCI_RH_SUSPENDED,
+ OHCI_RH_RUNNING
+};
+
struct ohci_hcd {
spinlock_t lock;
@@ -384,6 +390,7 @@
/*
* driver state
*/
+ enum ohci_rh_state rh_state;
int num_ports;
int load [NUM_INTS];
u32 hc_control; /* copy of hc control reg */
@@ -679,11 +686,6 @@
/*-------------------------------------------------------------------------*/
-static inline void disable (struct ohci_hcd *ohci)
-{
- ohci_to_hcd(ohci)->state = HC_STATE_HALT;
-}
-
#define FI 0x2edf /* 12000 bits per frame (-1) */
#define FSMP(fi) (0x7fff & ((6 * ((fi) - 210)) / 7))
#define FIT (1 << 31)
@@ -707,7 +709,7 @@
#define read_roothub(hc, register, mask) ({ \
u32 temp = ohci_readl (hc, &hc->regs->roothub.register); \
if (temp == -1) \
- disable (hc); \
+ hc->rh_state = OHCI_RH_HALTED; \
else if (hc->flags & OHCI_QUIRK_AMD756) \
while (temp & mask) \
temp = ohci_readl (hc, &hc->regs->roothub.register); \
diff --git a/drivers/usb/host/oxu210hp-hcd.c b/drivers/usb/host/oxu210hp-hcd.c
index dcd8898..6f62de5 100644
--- a/drivers/usb/host/oxu210hp-hcd.c
+++ b/drivers/usb/host/oxu210hp-hcd.c
@@ -3951,24 +3951,7 @@
}
};
-static int __init oxu_module_init(void)
-{
- int retval = 0;
-
- retval = platform_driver_register(&oxu_driver);
- if (retval < 0)
- return retval;
-
- return retval;
-}
-
-static void __exit oxu_module_cleanup(void)
-{
- platform_driver_unregister(&oxu_driver);
-}
-
-module_init(oxu_module_init);
-module_exit(oxu_module_cleanup);
+module_platform_driver(oxu_driver);
MODULE_DESCRIPTION("Oxford OXU210HP HCD driver - ver. " DRIVER_VERSION);
MODULE_AUTHOR("Rodolfo Giometti <giometti@linux.it>");
diff --git a/drivers/usb/host/uhci-q.c b/drivers/usb/host/uhci-q.c
index f6ca80e..d2c6f5a 100644
--- a/drivers/usb/host/uhci-q.c
+++ b/drivers/usb/host/uhci-q.c
@@ -943,7 +943,7 @@
if (usb_pipein(urb->pipe))
status |= TD_CTRL_SPD;
- i = urb->num_sgs;
+ i = urb->num_mapped_sgs;
if (len > 0 && i > 0) {
sg = urb->sg;
data = sg_dma_address(sg);
diff --git a/drivers/usb/host/whci/qset.c b/drivers/usb/host/whci/qset.c
index a403b53..76083ae 100644
--- a/drivers/usb/host/whci/qset.c
+++ b/drivers/usb/host/whci/qset.c
@@ -443,7 +443,7 @@
remaining = urb->transfer_buffer_length;
- for_each_sg(urb->sg, sg, urb->num_sgs, i) {
+ for_each_sg(urb->sg, sg, urb->num_mapped_sgs, i) {
dma_addr_t dma_addr;
size_t dma_remaining;
dma_addr_t sp, ep;
@@ -561,7 +561,7 @@
remaining = urb->transfer_buffer_length;
- for_each_sg(urb->sg, sg, urb->num_sgs, i) {
+ for_each_sg(urb->sg, sg, urb->num_mapped_sgs, i) {
size_t len;
size_t sg_remaining;
void *orig;
diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c
index 430e88f..35e257f 100644
--- a/drivers/usb/host/xhci-hub.c
+++ b/drivers/usb/host/xhci-hub.c
@@ -57,17 +57,15 @@
desc->bHubContrCurrent = 0;
desc->bNbrPorts = ports;
- /* Ugh, these should be #defines, FIXME */
- /* Using table 11-13 in USB 2.0 spec. */
temp = 0;
- /* Bits 1:0 - support port power switching, or power always on */
+ /* Bits 1:0 - support per-port power switching, or power always on */
if (HCC_PPC(xhci->hcc_params))
- temp |= 0x0001;
+ temp |= HUB_CHAR_INDV_PORT_LPSM;
else
- temp |= 0x0002;
+ temp |= HUB_CHAR_NO_LPSM;
/* Bit 2 - root hubs are not part of a compound device */
/* Bits 4:3 - individual port over current protection */
- temp |= 0x0008;
+ temp |= HUB_CHAR_INDV_PORT_OCPM;
/* Bits 6:5 - no TTs in root ports */
/* Bit 7 - no port indicators */
desc->wHubCharacteristics = cpu_to_le16(temp);
@@ -86,9 +84,9 @@
ports = xhci->num_usb2_ports;
xhci_common_hub_descriptor(xhci, desc, ports);
- desc->bDescriptorType = 0x29;
+ desc->bDescriptorType = USB_DT_HUB;
temp = 1 + (ports / 8);
- desc->bDescLength = 7 + 2 * temp;
+ desc->bDescLength = USB_DT_HUB_NONVAR_SIZE + 2 * temp;
/* The Device Removable bits are reported on a byte granularity.
* If the port doesn't exist within that byte, the bit is set to 0.
@@ -137,8 +135,8 @@
ports = xhci->num_usb3_ports;
xhci_common_hub_descriptor(xhci, desc, ports);
- desc->bDescriptorType = 0x2a;
- desc->bDescLength = 12;
+ desc->bDescriptorType = USB_DT_SS_HUB;
+ desc->bDescLength = USB_DT_SS_HUB_SIZE;
/* header decode latency should be zero for roothubs,
* see section 4.23.5.2.
diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index 9f1d4b1..d030f0b 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -2390,17 +2390,7 @@
irqreturn_t xhci_msi_irq(int irq, struct usb_hcd *hcd)
{
- irqreturn_t ret;
- struct xhci_hcd *xhci;
-
- xhci = hcd_to_xhci(hcd);
- set_bit(HCD_FLAG_SAW_IRQ, &hcd->flags);
- if (xhci->shared_hcd)
- set_bit(HCD_FLAG_SAW_IRQ, &xhci->shared_hcd->flags);
-
- ret = xhci_irq(hcd);
-
- return ret;
+ return xhci_irq(hcd);
}
/**** Endpoint Ring Operations ****/
@@ -2561,7 +2551,7 @@
struct scatterlist *sg;
sg = NULL;
- num_sgs = urb->num_sgs;
+ num_sgs = urb->num_mapped_sgs;
temp = urb->transfer_buffer_length;
xhci_dbg(xhci, "count sg list trbs: \n");
@@ -2745,7 +2735,7 @@
return -EINVAL;
num_trbs = count_sg_trbs_needed(xhci, urb);
- num_sgs = urb->num_sgs;
+ num_sgs = urb->num_mapped_sgs;
total_packet_count = roundup(urb->transfer_buffer_length,
usb_endpoint_maxp(&urb->ep->desc));
diff --git a/drivers/usb/misc/isight_firmware.c b/drivers/usb/misc/isight_firmware.c
index fe1d443..8f725f6 100644
--- a/drivers/usb/misc/isight_firmware.c
+++ b/drivers/usb/misc/isight_firmware.c
@@ -55,8 +55,9 @@
ptr = firmware->data;
+ buf[0] = 0x01;
if (usb_control_msg
- (dev, usb_sndctrlpipe(dev, 0), 0xa0, 0x40, 0xe600, 0, "\1", 1,
+ (dev, usb_sndctrlpipe(dev, 0), 0xa0, 0x40, 0xe600, 0, buf, 1,
300) != 1) {
printk(KERN_ERR
"Failed to initialise isight firmware loader\n");
@@ -100,8 +101,9 @@
}
}
+ buf[0] = 0x00;
if (usb_control_msg
- (dev, usb_sndctrlpipe(dev, 0), 0xa0, 0x40, 0xe600, 0, "\0", 1,
+ (dev, usb_sndctrlpipe(dev, 0), 0xa0, 0x40, 0xe600, 0, buf, 1,
300) != 1) {
printk(KERN_ERR "isight firmware loading completion failed\n");
ret = -ENODEV;
diff --git a/drivers/usb/misc/usbtest.c b/drivers/usb/misc/usbtest.c
index bd6d008..959145b 100644
--- a/drivers/usb/misc/usbtest.c
+++ b/drivers/usb/misc/usbtest.c
@@ -1765,7 +1765,6 @@
* off just killing the userspace task and waiting for it to exit.
*/
-/* No BKL needed */
static int
usbtest_ioctl(struct usb_interface *intf, unsigned int code, void *buf)
{
diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
index 90b9da1..de7405e 100644
--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -661,7 +661,6 @@
handled = IRQ_HANDLED;
musb->is_active = 1;
- set_bit(HCD_FLAG_SAW_IRQ, &hcd->flags);
musb->ep0_stage = MUSB_EP0_START;
diff --git a/drivers/usb/otg/fsl_otg.c b/drivers/usb/otg/fsl_otg.c
index 0f420b2..2a52ff1 100644
--- a/drivers/usb/otg/fsl_otg.c
+++ b/drivers/usb/otg/fsl_otg.c
@@ -1151,18 +1151,7 @@
},
};
-static int __init fsl_usb_otg_init(void)
-{
- pr_info(DRIVER_INFO "\n");
- return platform_driver_register(&fsl_otg_driver);
-}
-module_init(fsl_usb_otg_init);
-
-static void __exit fsl_usb_otg_exit(void)
-{
- platform_driver_unregister(&fsl_otg_driver);
-}
-module_exit(fsl_usb_otg_exit);
+module_platform_driver(fsl_otg_driver);
MODULE_DESCRIPTION(DRIVER_INFO);
MODULE_AUTHOR(DRIVER_AUTHOR);
diff --git a/drivers/usb/renesas_usbhs/common.c b/drivers/usb/renesas_usbhs/common.c
index 08c679c..aa94e33 100644
--- a/drivers/usb/renesas_usbhs/common.c
+++ b/drivers/usb/renesas_usbhs/common.c
@@ -637,18 +637,7 @@
.remove = __devexit_p(usbhs_remove),
};
-static int __init usbhs_init(void)
-{
- return platform_driver_register(&renesas_usbhs_driver);
-}
-
-static void __exit usbhs_exit(void)
-{
- platform_driver_unregister(&renesas_usbhs_driver);
-}
-
-module_init(usbhs_init);
-module_exit(usbhs_exit);
+module_platform_driver(renesas_usbhs_driver);
MODULE_LICENSE("GPL");
MODULE_DESCRIPTION("Renesas USB driver");
diff --git a/drivers/usb/renesas_usbhs/mod_host.c b/drivers/usb/renesas_usbhs/mod_host.c
index bade761..75659e0 100644
--- a/drivers/usb/renesas_usbhs/mod_host.c
+++ b/drivers/usb/renesas_usbhs/mod_host.c
@@ -1268,7 +1268,7 @@
return -ENOMEM;
}
- pipe_info = kzalloc(sizeof(*pipe_info) * pipe_size, GFP_KERNEL);
+ pipe_info = kcalloc(pipe_size, sizeof(*pipe_info), GFP_KERNEL);
if (!pipe_info) {
dev_err(dev, "Could not allocate pipe_info\n");
goto usbhs_mod_host_probe_err;
diff --git a/drivers/usb/serial/ChangeLog.history b/drivers/usb/serial/ChangeLog.history
deleted file mode 100644
index f13fd48..0000000
--- a/drivers/usb/serial/ChangeLog.history
+++ /dev/null
@@ -1,730 +0,0 @@
-This is the contents of some of the drivers/usb/serial/ files that had old
-changelog comments. They were quite old, and out of date, and we don't keep
-them anymore, so I've put them here, away from the source files, in case
-people still care to see them.
-
-- Greg Kroah-Hartman <greg@kroah.com> October 20, 2005
-
------------------------------------------------------------------------
-usb-serial.h Change Log comments:
-
- (03/26/2002) gkh
- removed the port->tty check from port_paranoia_check() due to serial
- consoles not having a tty device assigned to them.
-
- (12/03/2001) gkh
- removed active from the port structure.
- added documentation to the usb_serial_device_type structure
-
- (10/10/2001) gkh
- added vendor and product to serial structure. Needed to determine device
- owner when the device is disconnected.
-
- (05/30/2001) gkh
- added sem to port structure and removed port_lock
-
- (10/05/2000) gkh
- Added interrupt_in_endpointAddress and bulk_in_endpointAddress to help
- fix bug with urb->dev not being set properly, now that the usb core
- needs it.
-
- (09/11/2000) gkh
- Added usb_serial_debug_data function to help get rid of #DEBUG in the
- drivers.
-
- (08/28/2000) gkh
- Added port_lock to port structure.
-
- (08/08/2000) gkh
- Added open_count to port structure.
-
- (07/23/2000) gkh
- Added bulk_out_endpointAddress to port structure.
-
- (07/19/2000) gkh, pberger, and borchers
- Modifications to allow usb-serial drivers to be modules.
-
------------------------------------------------------------------------
-usb-serial.c Change Log comments:
-
- (12/10/2002) gkh
- Split the ports off into their own struct device, and added a
- usb-serial bus driver.
-
- (11/19/2002) gkh
- removed a few #ifdefs for the generic code and cleaned up the failure
- logic in initialization.
-
- (10/02/2002) gkh
- moved the console code to console.c and out of this file.
-
- (06/05/2002) gkh
- moved location of startup() call in serial_probe() until after all
- of the port information and endpoints are initialized. This makes
- things easier for some drivers.
-
- (04/10/2002) gkh
- added serial_read_proc function which creates a
- /proc/tty/driver/usb-serial file.
-
- (03/27/2002) gkh
- Got USB serial console code working properly and merged into the main
- version of the tree. Thanks to Randy Dunlap for the initial version
- of this code, and for pushing me to finish it up.
- The USB serial console works with any usb serial driver device.
-
- (03/21/2002) gkh
- Moved all manipulation of port->open_count into the core. Now the
- individual driver's open and close functions are called only when the
- first open() and last close() is called. Making the drivers a bit
- smaller and simpler.
- Fixed a bug if a driver didn't have the owner field set.
-
- (02/26/2002) gkh
- Moved all locking into the main serial_* functions, instead of having
- the individual drivers have to grab the port semaphore. This should
- reduce races.
- Reworked the MOD_INC logic a bit to always increment and decrement, even
- if the generic driver is being used.
-
- (10/10/2001) gkh
- usb_serial_disconnect() now sets the serial->dev pointer is to NULL to
- help prevent child drivers from accessing the device since it is now
- gone.
-
- (09/13/2001) gkh
- Moved generic driver initialize after we have registered with the USB
- core. Thanks to Randy Dunlap for pointing this problem out.
-
- (07/03/2001) gkh
- Fixed module paramater size. Thanks to John Brockmeyer for the pointer.
- Fixed vendor and product getting defined through the MODULE_PARM macro
- if the Generic driver wasn't compiled in.
- Fixed problem with generic_shutdown() not being called for drivers that
- don't have a shutdown() function.
-
- (06/06/2001) gkh
- added evil hack that is needed for the prolific pl2303 device due to the
- crazy way its endpoints are set up.
-
- (05/30/2001) gkh
- switched from using spinlock to a semaphore, which fixes lots of problems.
-
- (04/08/2001) gb
- Identify version on module load.
-
- 2001_02_05 gkh
- Fixed buffer overflows bug with the generic serial driver. Thanks to
- Todd Squires <squirest@ct0.com> for fixing this.
-
- (01/10/2001) gkh
- Fixed bug where the generic serial adaptor grabbed _any_ device that was
- offered to it.
-
- (12/12/2000) gkh
- Removed MOD_INC and MOD_DEC from poll and disconnect functions, and
- moved them to the serial_open and serial_close functions.
- Also fixed bug with there not being a MOD_DEC for the generic driver
- (thanks to Gary Brubaker for finding this.)
-
- (11/29/2000) gkh
- Small NULL pointer initialization cleanup which saves a bit of disk image
-
- (11/01/2000) Adam J. Richter
- instead of using idVendor/idProduct pairs, usb serial drivers
- now identify their hardware interest with usb_device_id tables,
- which they usually have anyhow for use with MODULE_DEVICE_TABLE.
-
- (10/05/2000) gkh
- Fixed bug with urb->dev not being set properly, now that the usb
- core needs it.
-
- (09/11/2000) gkh
- Removed DEBUG #ifdefs with call to usb_serial_debug_data
-
- (08/28/2000) gkh
- Added port_lock to port structure.
- Added locks for SMP safeness to generic driver
- Fixed the ability to open a generic device's port more than once.
-
- (07/23/2000) gkh
- Added bulk_out_endpointAddress to port structure.
-
- (07/19/2000) gkh, pberger, and borchers
- Modifications to allow usb-serial drivers to be modules.
-
- (07/03/2000) gkh
- Added more debugging to serial_ioctl call
-
- (06/25/2000) gkh
- Changed generic_write_bulk_callback to not call wake_up_interruptible
- directly, but to have port_softint do it at a safer time.
-
- (06/23/2000) gkh
- Cleaned up debugging statements in a quest to find UHCI timeout bug.
-
- (05/22/2000) gkh
- Changed the makefile, enabling the big CONFIG_USB_SERIAL_SOMTHING to be
- removed from the individual device source files.
-
- (05/03/2000) gkh
- Added the Digi Acceleport driver from Al Borchers and Peter Berger.
-
- (05/02/2000) gkh
- Changed devfs and tty register code to work properly now. This was based on
- the ACM driver changes by Vojtech Pavlik.
-
- (04/27/2000) Ryan VanderBijl
- Put calls to *_paranoia_checks into one function.
-
- (04/23/2000) gkh
- Fixed bug that Randy Dunlap found for Generic devices with no bulk out ports.
- Moved when the startup code printed out the devices that are supported.
-
- (04/19/2000) gkh
- Added driver for ZyXEL omni.net lcd plus ISDN TA
- Made startup info message specify which drivers were compiled in.
-
- (04/03/2000) gkh
- Changed the probe process to remove the module unload races.
- Changed where the tty layer gets initialized to have devfs work nicer.
- Added initial devfs support.
-
- (03/26/2000) gkh
- Split driver up into device specific pieces.
-
- (03/19/2000) gkh
- Fixed oops that could happen when device was removed while a program
- was talking to the device.
- Removed the static urbs and now all urbs are created and destroyed
- dynamically.
- Reworked the internal interface. Now everything is based on the
- usb_serial_port structure instead of the larger usb_serial structure.
- This fixes the bug that a multiport device could not have more than
- one port open at one time.
-
- (03/17/2000) gkh
- Added config option for debugging messages.
- Added patch for keyspan pda from Brian Warner.
-
- (03/06/2000) gkh
- Added the keyspan pda code from Brian Warner <warner@lothar.com>
- Moved a bunch of the port specific stuff into its own structure. This
- is in anticipation of the true multiport devices (there's a bug if you
- try to access more than one port of any multiport device right now)
-
- (02/21/2000) gkh
- Made it so that any serial devices only have to specify which functions
- they want to overload from the generic function calls (great,
- inheritance in C, in a driver, just what I wanted...)
- Added support for set_termios and ioctl function calls. No drivers take
- advantage of this yet.
- Removed the #ifdef MODULE, now there is no module specific code.
- Cleaned up a few comments in usb-serial.h that were wrong (thanks again
- to Miles Lott).
- Small fix to get_free_serial.
-
- (02/14/2000) gkh
- Removed the Belkin and Peracom functionality from the driver due to
- the lack of support from the vendor, and me not wanting people to
- accidenatly buy the device, expecting it to work with Linux.
- Added read_bulk_callback and write_bulk_callback to the type structure
- for the needs of the FTDI and WhiteHEAT driver.
- Changed all reverences to FTDI to FTDI_SIO at the request of Bill
- Ryder.
- Changed the output urb size back to the max endpoint size to make
- the ftdi_sio driver have it easier, and due to the fact that it didn't
- really increase the speed any.
-
- (02/11/2000) gkh
- Added VISOR_FUNCTION_CONSOLE to the visor startup function. This was a
- patch from Miles Lott (milos@insync.net).
- Fixed bug with not restoring the minor range that a device grabs, if
- the startup function fails (thanks Miles for finding this).
-
- (02/05/2000) gkh
- Added initial framework for the Keyspan PDA serial converter so that
- Brian Warner has a place to put his code.
- Made the ezusb specific functions generic enough that different
- devices can use them (whiteheat and keyspan_pda both need them).
- Split out a whole bunch of structure and other stuff to a separate
- usb-serial.h file.
- Made the Visor connection messages a little more understandable, now
- that Miles Lott (milos@insync.net) has gotten the Generic channel to
- work. Also made them always show up in the log file.
-
- (01/25/2000) gkh
- Added initial framework for FTDI serial converter so that Bill Ryder
- has a place to put his code.
- Added the vendor specific info from Handspring. Now we can print out
- informational debug messages as well as understand what is happening.
-
- (01/23/2000) gkh
- Fixed problem of crash when trying to open a port that didn't have a
- device assigned to it. Made the minor node finding a little smarter,
- now it looks to find a continuous space for the new device.
-
- (01/21/2000) gkh
- Fixed bug in visor_startup with patch from Miles Lott (milos@insync.net)
- Fixed get_serial_by_minor which was all messed up for multi port
- devices. Fixed multi port problem for generic devices. Now the number
- of ports is determined by the number of bulk out endpoints for the
- generic device.
-
- (01/19/2000) gkh
- Removed lots of cruft that was around from the old (pre urb) driver
- interface.
- Made the serial_table dynamic. This should save lots of memory when
- the number of minor nodes goes up to 256.
- Added initial support for devices that have more than one port.
- Added more debugging comments for the Visor, and added a needed
- set_configuration call.
-
- (01/17/2000) gkh
- Fixed the WhiteHEAT firmware (my processing tool had a bug)
- and added new debug loader firmware for it.
- Removed the put_char function as it isn't really needed.
- Added visor startup commands as found by the Win98 dump.
-
- (01/13/2000) gkh
- Fixed the vendor id for the generic driver to the one I meant it to be.
-
- (01/12/2000) gkh
- Forget the version numbering...that's pretty useless...
- Made the driver able to be compiled so that the user can select which
- converter they want to use. This allows people who only want the Visor
- support to not pay the memory size price of the WhiteHEAT.
- Fixed bug where the generic driver (idVendor=0000 and idProduct=0000)
- grabbed the root hub. Not good.
-
- version 0.4.0 (01/10/2000) gkh
- Added whiteheat.h containing the firmware for the ConnectTech WhiteHEAT
- device. Added startup function to allow firmware to be downloaded to
- a device if it needs to be.
- Added firmware download logic to the WhiteHEAT device.
- Started to add #defines to split up the different drivers for potential
- configuration option.
-
- version 0.3.1 (12/30/99) gkh
- Fixed problems with urb for bulk out.
- Added initial support for multiple sets of endpoints. This enables
- the Handspring Visor to be attached successfully. Only the first
- bulk in / bulk out endpoint pair is being used right now.
-
- version 0.3.0 (12/27/99) gkh
- Added initial support for the Handspring Visor based on a patch from
- Miles Lott (milos@sneety.insync.net)
- Cleaned up the code a bunch and converted over to using urbs only.
-
- version 0.2.3 (12/21/99) gkh
- Added initial support for the Connect Tech WhiteHEAT converter.
- Incremented the number of ports in expectation of getting the
- WhiteHEAT to work properly (4 ports per connection).
- Added notification on insertion and removal of what port the
- device is/was connected to (and what kind of device it was).
-
- version 0.2.2 (12/16/99) gkh
- Changed major number to the new allocated number. We're legal now!
-
- version 0.2.1 (12/14/99) gkh
- Fixed bug that happens when device node is opened when there isn't a
- device attached to it. Thanks to marek@webdesign.no for noticing this.
-
- version 0.2.0 (11/10/99) gkh
- Split up internals to make it easier to add different types of serial
- converters to the code.
- Added a "generic" driver that gets it's vendor and product id
- from when the module is loaded. Thanks to David E. Nelson (dnelson@jump.net)
- for the idea and sample code (from the usb scanner driver.)
- Cleared up any licensing questions by releasing it under the GNU GPL.
-
- version 0.1.2 (10/25/99) gkh
- Fixed bug in detecting device.
-
- version 0.1.1 (10/05/99) gkh
- Changed the major number to not conflict with anything else.
-
- version 0.1 (09/28/99) gkh
- Can recognize the two different devices and start up a read from
- device when asked to. Writes also work. No control signals yet, this
- all is vendor specific data (i.e. no spec), also no control for
- different baud rates or other bit settings.
- Currently we are using the same devid as the acm driver. This needs
- to change.
-
------------------------------------------------------------------------
-visor.c Change Log comments:
-
- (06/03/2003) Judd Montgomery <judd at jpilot.org>
- Added support for module parameter options for untested/unknown
- devices.
-
- (03/09/2003) gkh
- Added support for the Sony Clie NZ90V device. Thanks to Martin Brachtl
- <brachtl@redgrep.cz> for the information.
-
- (03/05/2003) gkh
- Think Treo support is now working.
-
- (04/03/2002) gkh
- Added support for the Sony OS 4.1 devices. Thanks to Hiroyuki ARAKI
- <hiro@zob.ne.jp> for the information.
-
- (03/27/2002) gkh
- Removed assumptions that port->tty was always valid (is not true
- for usb serial console devices.)
-
- (03/23/2002) gkh
- Added support for the Palm i705 device, thanks to Thomas Riemer
- <tom@netmech.com> for the information.
-
- (03/21/2002) gkh
- Added support for the Palm m130 device, thanks to Udo Eisenbarth
- <udo.eisenbarth@web.de> for the information.
-
- (02/27/2002) gkh
- Reworked the urb handling logic. We have no more pool, but dynamically
- allocate the urb and the transfer buffer on the fly. In testing this
- does not incure any measurable overhead. This also relies on the fact
- that we have proper reference counting logic for urbs.
-
- (02/21/2002) SilaS
- Added initial support for the Palm m515 devices.
-
- (02/14/2002) gkh
- Added support for the Clie S-360 device.
-
- (12/18/2001) gkh
- Added better Clie support for 3.5 devices. Thanks to Geoffrey Levand
- for the patch.
-
- (11/11/2001) gkh
- Added support for the m125 devices, and added check to prevent oopses
- for Clié devices that lie about the number of ports they have.
-
- (08/30/2001) gkh
- Added support for the Clie devices, both the 3.5 and 4.0 os versions.
- Many thanks to Daniel Burke, and Bryan Payne for helping with this.
-
- (08/23/2001) gkh
- fixed a few potential bugs pointed out by Oliver Neukum.
-
- (05/30/2001) gkh
- switched from using spinlock to a semaphore, which fixes lots of problems.
-
- (05/28/2000) gkh
- Added initial support for the Palm m500 and Palm m505 devices.
-
- (04/08/2001) gb
- Identify version on module load.
-
- (01/21/2000) gkh
- Added write_room and chars_in_buffer, as they were previously using the
- generic driver versions which is all wrong now that we are using an urb
- pool. Thanks to Wolfgang Grandegger for pointing this out to me.
- Removed count assignment in the write function, which was not needed anymore
- either. Thanks to Al Borchers for pointing this out.
-
- (12/12/2000) gkh
- Moved MOD_DEC to end of visor_close to be nicer, as the final write
- message can sleep.
-
- (11/12/2000) gkh
- Fixed bug with data being dropped on the floor by forcing tty->low_latency
- to be on. Hopefully this fixes the OHCI issue!
-
- (11/01/2000) Adam J. Richter
- usb_device_id table support
-
- (10/05/2000) gkh
- Fixed bug with urb->dev not being set properly, now that the usb
- core needs it.
-
- (09/11/2000) gkh
- Got rid of always calling kmalloc for every urb we wrote out to the
- device.
- Added visor_read_callback so we can keep track of bytes in and out for
- those people who like to know the speed of their device.
- Removed DEBUG #ifdefs with call to usb_serial_debug_data
-
- (09/06/2000) gkh
- Fixed oops in visor_exit. Need to uncomment usb_unlink_urb call _after_
- the host controller drivers set urb->dev = NULL when the urb is finished.
-
- (08/28/2000) gkh
- Added locks for SMP safeness.
-
- (08/08/2000) gkh
- Fixed endian problem in visor_startup.
- Fixed MOD_INC and MOD_DEC logic and the ability to open a port more
- than once.
-
- (07/23/2000) gkh
- Added pool of write urbs to speed up transfers to the visor.
-
- (07/19/2000) gkh
- Added module_init and module_exit functions to handle the fact that this
- driver is a loadable module now.
-
- (07/03/2000) gkh
- Added visor_set_ioctl and visor_set_termios functions (they don't do much
- of anything, but are good for debugging.)
-
- (06/25/2000) gkh
- Fixed bug in visor_unthrottle that should help with the disconnect in PPP
- bug that people have been reporting.
-
- (06/23/2000) gkh
- Cleaned up debugging statements in a quest to find UHCI timeout bug.
-
- (04/27/2000) Ryan VanderBijl
- Fixed memory leak in visor_close
-
- (03/26/2000) gkh
- Split driver up into device specific pieces.
-
------------------------------------------------------------------------
-pl2303.c Change Log comments:
-
- 2002_Mar_26 gkh
- allowed driver to work properly if there is no tty assigned to a port
- (this happens for serial console devices.)
-
- 2001_Oct_06 gkh
- Added RTS and DTR line control. Thanks to joe@bndlg.de for parts of it.
-
- 2001_Sep_19 gkh
- Added break support.
-
- 2001_Aug_30 gkh
- fixed oops in write_bulk_callback.
-
- 2001_Aug_28 gkh
- reworked buffer logic to be like other usb-serial drivers. Hopefully
- removing some reported problems.
-
- 2001_Jun_06 gkh
- finished porting to 2.4 format.
-
-
------------------------------------------------------------------------
-io_edgeport.c Change Log comments:
-
- 2003_04_03 al borchers
- - fixed a bug (that shows up with dosemu) where the tty struct is
- used in a callback after it has been freed
-
- 2.3 2002_03_08 greg kroah-hartman
- - fixed bug when multiple devices were attached at the same time.
-
- 2.2 2001_11_14 greg kroah-hartman
- - fixed bug in edge_close that kept the port from being used more
- than once.
- - fixed memory leak on device removal.
- - fixed potential double free of memory when command urb submitting
- failed.
- - other small cleanups when the device is removed
-
- 2.1 2001_07_09 greg kroah-hartman
- - added support for TIOCMBIS and TIOCMBIC.
-
- (04/08/2001) gb
- - Identify version on module load.
-
- 2.0 2001_03_05 greg kroah-hartman
- - reworked entire driver to fit properly in with the other usb-serial
- drivers. Occasional oopses still happen, but it's a good start.
-
- 1.2.3 (02/23/2001) greg kroah-hartman
- - changed device table to work properly for 2.4.x final format.
- - fixed problem with dropping data at high data rates.
-
- 1.2.2 (11/27/2000) greg kroah-hartman
- - cleaned up more NTisms.
- - Added device table for 2.4.0-test11
-
- 1.2.1 (11/08/2000) greg kroah-hartman
- - Started to clean up NTisms.
- - Fixed problem with dev field of urb for kernels >= 2.4.0-test9
-
- 1.2 (10/17/2000) David Iacovelli
- Remove all EPIC code and GPL source
- Fix RELEVANT_IFLAG macro to include flow control
- changes port configuration changes.
- Fix redefinition of SERIAL_MAGIC
- Change all timeout values to 5 seconds
- Tried to fix the UHCI multiple urb submission, but failed miserably.
- it seems to work fine with OHCI.
- ( Greg take a look at the #if 0 at end of WriteCmdUsb() we must
- find a way to work arount this UHCI bug )
-
- 1.1 (10/11/2000) David Iacovelli
- Fix XON/XOFF flow control to support both IXON and IXOFF
-
- 0.9.27 (06/30/2000) David Iacovelli
- Added transmit queue and now allocate urb for command writes.
-
- 0.9.26 (06/29/2000) David Iacovelli
- Add support for 80251 based edgeport
-
- 0.9.25 (06/27/2000) David Iacovelli
- Do not close the port if it has multiple opens.
-
- 0.9.24 (05/26/2000) David Iacovelli
- Add IOCTLs to support RXTX and JAVA POS
- and first cut at running BlackBox Demo
-
- 0.9.23 (05/24/2000) David Iacovelli
- Add IOCTLs to support RXTX and JAVA POS
-
- 0.9.22 (05/23/2000) David Iacovelli
- fixed bug in enumeration. If epconfig turns on mapping by
- path after a device is already plugged in, we now update
- the mapping correctly
-
- 0.9.21 (05/16/2000) David Iacovelli
- Added BlockUntilChaseResp() to also wait for txcredits
- Updated the way we allocate and handle write URBs
- Add debug code to dump buffers
-
- 0.9.20 (05/01/2000) David Iacovelli
- change driver to use usb/tts/
-
- 0.9.19 (05/01/2000) David Iacovelli
- Update code to compile if DEBUG is off
-
- 0.9.18 (04/28/2000) David Iacovelli
- cleanup and test tty_register with devfs
-
- 0.9.17 (04/27/2000) greg kroah-hartman
- changed tty_register around to be like the way it
- was before, but now it works properly with devfs.
-
- 0.9.16 (04/26/2000) david iacovelli
- Fixed bug in GetProductInfo()
-
- 0.9.15 (04/25/2000) david iacovelli
- Updated enumeration
-
- 0.9.14 (04/24/2000) david iacovelli
- Removed all config/status IOCTLS and
- converted to using /proc/edgeport
- still playing with devfs
-
- 0.9.13 (04/24/2000) david iacovelli
- Removed configuration based on ttyUSB0
- Added support for configuration using /prod/edgeport
- first attempt at using devfs (not working yet!)
- Added IOCTL to GetProductInfo()
- Added support for custom baud rates
- Add support for random port numbers
-
- 0.9.12 (04/18/2000) david iacovelli
- added additional configuration IOCTLs
- use ttyUSB0 for configuration
-
- 0.9.11 (04/17/2000) greg kroah-hartman
- fixed module initialization race conditions.
- made all urbs dynamically allocated.
- made driver devfs compatible. now it only registers the tty device
- when the device is actually plugged in.
-
- 0.9.10 (04/13/2000) greg kroah-hartman
- added proc interface framework.
-
- 0.9.9 (04/13/2000) david iacovelli
- added enumeration code and ioctls to configure the device
-
- 0.9.8 (04/12/2000) david iacovelli
- Change interrupt read start when device is plugged in
- and stop when device is removed
- process interrupt reads when all ports are closed
- (keep value of rxBytesAvail consistent with the edgeport)
- set the USB_BULK_QUEUE flag so that we can shove a bunch
- of urbs at once down the pipe
-
- 0.9.7 (04/10/2000) david iacovelli
- start to add enumeration code.
- generate serial number for epic devices
- add support for kdb
-
- 0.9.6 (03/30/2000) david iacovelli
- add IOCTL to get string, manufacture, and boot descriptors
-
- 0.9.5 (03/14/2000) greg kroah-hartman
- more error checking added to SerialOpen to try to fix UHCI open problem
-
- 0.9.4 (03/09/2000) greg kroah-hartman
- added more error checking to handle oops when data is hanging
- around and tty is abruptly closed.
-
- 0.9.3 (03/09/2000) david iacovelli
- Add epic support for xon/xoff chars
- play with performance
-
- 0.9.2 (03/08/2000) greg kroah-hartman
- changed most "info" calls to "dbg"
- implemented flow control properly in the termios call
-
- 0.9.1 (03/08/2000) david iacovelli
- added EPIC support
- enabled bootloader update
-
- 0.9 (03/08/2000) greg kroah-hartman
- Release to IO networks.
- Integrated changes that David made
- made getting urbs for writing SMP safe
-
- 0.8 (03/07/2000) greg kroah-hartman
- Release to IO networks.
- Fixed problems that were seen in code by David.
- Now both Edgeport/4 and Edgeport/2 works properly.
- Changed most of the functions to use port instead of serial.
-
- 0.7 (02/27/2000) greg kroah-hartman
- Milestone 3 release.
- Release to IO Networks
- ioctl for waiting on line change implemented.
- ioctl for getting statistics implemented.
- multiport support working.
- lsr and msr registers are now handled properly.
- change break now hooked up and working.
- support for all known Edgeport devices.
-
- 0.6 (02/22/2000) greg kroah-hartman
- Release to IO networks.
- CHASE is implemented correctly when port is closed.
- SerialOpen now blocks correctly until port is fully opened.
-
- 0.5 (02/20/2000) greg kroah-hartman
- Release to IO networks.
- Known problems:
- modem status register changes are not sent on to the user
- CHASE is not implemented when the port is closed.
-
- 0.4 (02/16/2000) greg kroah-hartman
- Second cut at the CeBit demo.
- Doesn't leak memory on every write to the port
- Still small leaks on startup.
- Added support for Edgeport/2 and Edgeport/8
-
- 0.3 (02/15/2000) greg kroah-hartman
- CeBit demo release.
- Force the line settings to 4800, 8, 1, e for the demo.
- Warning! This version leaks memory like crazy!
-
- 0.2 (01/30/2000) greg kroah-hartman
- Milestone 1 release.
- Device is found by USB subsystem, enumerated, firmware is downloaded
- and the descriptors are printed to the debug log, config is set, and
- green light starts to blink. Open port works, and data can be sent
- and received at the default settings of the UART. Loopback connector
- and debug log confirms this.
-
- 0.1 (01/23/2000) greg kroah-hartman
- Initial release to help IO Networks try to set up their test system.
- Edgeport4 is recognized, firmware is downloaded, config is set so
- device blinks green light every 3 sec. Port is bound, but opening,
- closing, and sending data do not work properly.
-
-
diff --git a/drivers/usb/serial/belkin_sa.c b/drivers/usb/serial/belkin_sa.c
index d6921fa..f9f29b2 100644
--- a/drivers/usb/serial/belkin_sa.c
+++ b/drivers/usb/serial/belkin_sa.c
@@ -20,50 +20,7 @@
* TODO:
* -- Add true modem contol line query capability. Currently we track the
* states reported by the interrupt and the states we request.
- * -- Add error reporting back to application for UART error conditions.
- * Just point me at how to implement this and I'll do it. I've put the
- * framework in, but haven't analyzed the "tty_flip" interface yet.
* -- Add support for flush commands
- * -- Add everything that is missing :)
- *
- * 27-Nov-2001 gkh
- * compressed all the differnent device entries into 1.
- *
- * 30-May-2001 gkh
- * switched from using spinlock to a semaphore, which fixes lots of
- * problems.
- *
- * 08-Apr-2001 gb
- * - Identify version on module load.
- *
- * 12-Mar-2001 gkh
- * - Added support for the GoHubs GO-COM232 device which is the same as the
- * Peracom device.
- *
- * 06-Nov-2000 gkh
- * - Added support for the old Belkin and Peracom devices.
- * - Made the port able to be opened multiple times.
- * - Added some defaults incase the line settings are things these devices
- * can't support.
- *
- * 18-Oct-2000 William Greathouse
- * Released into the wild (linux-usb-devel)
- *
- * 17-Oct-2000 William Greathouse
- * Add code to recognize firmware version and set hardware flow control
- * appropriately. Belkin states that firmware prior to 3.05 does not
- * operate correctly in hardware handshake mode. I have verified this
- * on firmware 2.05 -- for both RTS and DTR input flow control, the control
- * line is not reset. The test performed by the Belkin Win* driver is
- * to enable hardware flow control for firmware 2.06 or greater and
- * for 1.00 or prior. I am only enabling for 2.06 or greater.
- *
- * 12-Oct-2000 William Greathouse
- * First cut at supporting Belkin USB Serial Adapter F5U103
- * I did not have a copy of the original work to support this
- * adapter, so pardon any stupid mistakes. All of the information
- * I am using to write this driver was acquired by using a modified
- * UsbSnoop on Windows2000 and from examining the other USB drivers.
*/
#include <linux/kernel.h>
diff --git a/drivers/usb/serial/ch341.c b/drivers/usb/serial/ch341.c
index 6ae1c06..0e77511 100644
--- a/drivers/usb/serial/ch341.c
+++ b/drivers/usb/serial/ch341.c
@@ -335,13 +335,12 @@
goto out;
dbg("%s - submitting interrupt urb", __func__);
- port->interrupt_in_urb->dev = serial->dev;
r = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
if (r) {
dev_err(&port->dev, "%s - failed submitting interrupt urb,"
" error %d\n", __func__, r);
ch341_close(port);
- return -EPROTO;
+ goto out;
}
r = usb_serial_generic_open(tty, port);
diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c
index fd67cc5..7175bb1 100644
--- a/drivers/usb/serial/cp210x.c
+++ b/drivers/usb/serial/cp210x.c
@@ -280,7 +280,10 @@
dbg("%s - Unable to send config request, "
"request=0x%x size=%d result=%d\n",
__func__, request, size, result);
- return -EPROTO;
+ if (result > 0)
+ result = -EPROTO;
+
+ return result;
}
return 0;
@@ -331,7 +334,10 @@
dbg("%s - Unable to send request, "
"request=0x%x size=%d result=%d\n",
__func__, request, size, result);
- return -EPROTO;
+ if (result > 0)
+ result = -EPROTO;
+
+ return result;
}
return 0;
@@ -395,10 +401,11 @@
dbg("%s - port %d", __func__, port->number);
- if (cp210x_set_config_single(port, CP210X_IFC_ENABLE, UART_ENABLE)) {
- dev_err(&port->dev, "%s - Unable to enable UART\n",
- __func__);
- return -EPROTO;
+ result = cp210x_set_config_single(port, CP210X_IFC_ENABLE,
+ UART_ENABLE);
+ if (result) {
+ dev_err(&port->dev, "%s - Unable to enable UART\n", __func__);
+ return result;
}
result = usb_serial_generic_open(tty, port);
@@ -520,18 +527,13 @@
cflag |= PARENB;
break;
case BITS_PARITY_MARK:
- dbg("%s - parity = MARK (not supported, disabling parity)",
- __func__);
- cflag &= ~PARENB;
- bits &= ~BITS_PARITY_MASK;
- cp210x_set_config(port, CP210X_SET_LINE_CTL, &bits, 2);
+ dbg("%s - parity = MARK", __func__);
+ cflag |= (PARENB|PARODD|CMSPAR);
break;
case BITS_PARITY_SPACE:
- dbg("%s - parity = SPACE (not supported, disabling parity)",
- __func__);
- cflag &= ~PARENB;
- bits &= ~BITS_PARITY_MASK;
- cp210x_set_config(port, CP210X_SET_LINE_CTL, &bits, 2);
+ dbg("%s - parity = SPACE", __func__);
+ cflag &= ~PARODD;
+ cflag |= (PARENB|CMSPAR);
break;
default:
dbg("%s - Unknown parity mode, disabling parity", __func__);
@@ -588,7 +590,6 @@
if (!tty)
return;
- tty->termios->c_cflag &= ~CMSPAR;
cflag = tty->termios->c_cflag;
old_cflag = old_termios->c_cflag;
baud = cp210x_quantise_baudrate(tty_get_baud_rate(tty));
@@ -643,16 +644,27 @@
"not supported by device\n");
}
- if ((cflag & (PARENB|PARODD)) != (old_cflag & (PARENB|PARODD))) {
+ if ((cflag & (PARENB|PARODD|CMSPAR)) !=
+ (old_cflag & (PARENB|PARODD|CMSPAR))) {
cp210x_get_config(port, CP210X_GET_LINE_CTL, &bits, 2);
bits &= ~BITS_PARITY_MASK;
if (cflag & PARENB) {
- if (cflag & PARODD) {
- bits |= BITS_PARITY_ODD;
- dbg("%s - parity = ODD", __func__);
+ if (cflag & CMSPAR) {
+ if (cflag & PARODD) {
+ bits |= BITS_PARITY_MARK;
+ dbg("%s - parity = MARK", __func__);
+ } else {
+ bits |= BITS_PARITY_SPACE;
+ dbg("%s - parity = SPACE", __func__);
+ }
} else {
- bits |= BITS_PARITY_EVEN;
- dbg("%s - parity = EVEN", __func__);
+ if (cflag & PARODD) {
+ bits |= BITS_PARITY_ODD;
+ dbg("%s - parity = ODD", __func__);
+ } else {
+ bits |= BITS_PARITY_EVEN;
+ dbg("%s - parity = EVEN", __func__);
+ }
}
}
if (cp210x_set_config(port, CP210X_SET_LINE_CTL, &bits, 2))
diff --git a/drivers/usb/serial/cyberjack.c b/drivers/usb/serial/cyberjack.c
index f744ab7..98bf833 100644
--- a/drivers/usb/serial/cyberjack.c
+++ b/drivers/usb/serial/cyberjack.c
@@ -138,7 +138,6 @@
for (i = 0; i < serial->num_ports; ++i) {
int result;
- serial->port[i]->interrupt_in_urb->dev = serial->dev;
result = usb_submit_urb(serial->port[i]->interrupt_in_urb,
GFP_KERNEL);
if (result)
@@ -208,7 +207,6 @@
static int cyberjack_write(struct tty_struct *tty,
struct usb_serial_port *port, const unsigned char *buf, int count)
{
- struct usb_serial *serial = port->serial;
struct cyberjack_private *priv = usb_get_serial_port_data(port);
unsigned long flags;
int result;
@@ -221,22 +219,18 @@
return 0;
}
- spin_lock_bh(&port->lock);
- if (port->write_urb_busy) {
- spin_unlock_bh(&port->lock);
+ if (!test_and_clear_bit(0, &port->write_urbs_free)) {
dbg("%s - already writing", __func__);
return 0;
}
- port->write_urb_busy = 1;
- spin_unlock_bh(&port->lock);
spin_lock_irqsave(&priv->lock, flags);
if (count+priv->wrfilled > sizeof(priv->wrbuf)) {
/* To much data for buffer. Reset buffer. */
priv->wrfilled = 0;
- port->write_urb_busy = 0;
spin_unlock_irqrestore(&priv->lock, flags);
+ set_bit(0, &port->write_urbs_free);
return 0;
}
@@ -265,13 +259,7 @@
priv->wrsent = length;
/* set up our urb */
- usb_fill_bulk_urb(port->write_urb, serial->dev,
- usb_sndbulkpipe(serial->dev, port->bulk_out_endpointAddress),
- port->write_urb->transfer_buffer, length,
- ((serial->type->write_bulk_callback) ?
- serial->type->write_bulk_callback :
- cyberjack_write_bulk_callback),
- port);
+ port->write_urb->transfer_buffer_length = length;
/* send the data out the bulk port */
result = usb_submit_urb(port->write_urb, GFP_ATOMIC);
@@ -283,7 +271,7 @@
priv->wrfilled = 0;
priv->wrsent = 0;
spin_unlock_irqrestore(&priv->lock, flags);
- port->write_urb_busy = 0;
+ set_bit(0, &port->write_urbs_free);
return 0;
}
@@ -351,7 +339,6 @@
spin_unlock(&priv->lock);
if (!old_rdtodo) {
- port->read_urb->dev = port->serial->dev;
result = usb_submit_urb(port->read_urb, GFP_ATOMIC);
if (result)
dev_err(&port->dev, "%s - failed resubmitting "
@@ -362,7 +349,6 @@
}
resubmit:
- port->interrupt_in_urb->dev = port->serial->dev;
result = usb_submit_urb(port->interrupt_in_urb, GFP_ATOMIC);
if (result)
dev_err(&port->dev, "usb_submit_urb(read int) failed\n");
@@ -415,7 +401,6 @@
/* Continue to read if we have still urbs to do. */
if (todo /* || (urb->actual_length==port->bulk_in_endpointAddress)*/) {
- port->read_urb->dev = port->serial->dev;
result = usb_submit_urb(port->read_urb, GFP_ATOMIC);
if (result)
dev_err(&port->dev, "%s - failed resubmitting read "
@@ -432,7 +417,7 @@
dbg("%s - port %d", __func__, port->number);
- port->write_urb_busy = 0;
+ set_bit(0, &port->write_urbs_free);
if (status) {
dbg("%s - nonzero write bulk status received: %d",
__func__, status);
@@ -455,13 +440,7 @@
priv->wrsent += length;
/* set up our urb */
- usb_fill_bulk_urb(port->write_urb, port->serial->dev,
- usb_sndbulkpipe(port->serial->dev, port->bulk_out_endpointAddress),
- port->write_urb->transfer_buffer, length,
- ((port->serial->type->write_bulk_callback) ?
- port->serial->type->write_bulk_callback :
- cyberjack_write_bulk_callback),
- port);
+ port->write_urb->transfer_buffer_length = length;
/* send the data out the bulk port */
result = usb_submit_urb(port->write_urb, GFP_ATOMIC);
diff --git a/drivers/usb/serial/cypress_m8.c b/drivers/usb/serial/cypress_m8.c
index d9906eb..07680d6 100644
--- a/drivers/usb/serial/cypress_m8.c
+++ b/drivers/usb/serial/cypress_m8.c
@@ -16,32 +16,6 @@
*
* See http://geocities.com/i0xox0i for information on this driver and the
* earthmate usb device.
- *
- * Lonnie Mendez <dignome@gmail.com>
- * 4-29-2005
- * Fixed problem where setting or retreiving the serial config would fail
- * with EPIPE. Removed CRTS toggling so the driver behaves more like
- * other usbserial adapters. Issued new interval of 1ms instead of the
- * default 10ms. As a result, transfer speed has been substantially
- * increased from avg. 850bps to avg. 3300bps. initial termios has also
- * been modified. Cleaned up code and formatting issues so it is more
- * readable. Replaced the C++ style comments.
- *
- * Lonnie Mendez <dignome@gmail.com>
- * 12-15-2004
- * Incorporated write buffering from pl2303 driver. Fixed bug with line
- * handling so both lines are raised in cypress_open. (was dropping rts)
- * Various code cleanups made as well along with other misc bug fixes.
- *
- * Lonnie Mendez <dignome@gmail.com>
- * 04-10-2004
- * Driver modified to support dynamic line settings. Various improvements
- * and features.
- *
- * Neil Whelchel
- * 10-2003
- * Driver first released.
- *
*/
/* Thanks to Neil Whelchel for writing the first cypress m8 implementation
@@ -1162,8 +1136,6 @@
return;
if (actually_throttled) {
- port->interrupt_in_urb->dev = port->serial->dev;
-
result = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
if (result) {
dev_err(&port->dev, "%s - failed submitting read urb, "
@@ -1352,7 +1324,6 @@
dbg("%s - nonzero write bulk status received: %d",
__func__, status);
port->interrupt_out_urb->transfer_buffer_length = 1;
- port->interrupt_out_urb->dev = port->serial->dev;
result = usb_submit_urb(port->interrupt_out_urb, GFP_ATOMIC);
if (!result)
return;
diff --git a/drivers/usb/serial/digi_acceleport.c b/drivers/usb/serial/digi_acceleport.c
index e92cbefc..6d26a77 100644
--- a/drivers/usb/serial/digi_acceleport.c
+++ b/drivers/usb/serial/digi_acceleport.c
@@ -13,222 +13,6 @@
*
* Peter Berger (pberger@brimson.com)
* Al Borchers (borchers@steinerpoint.com)
-*
-* (12/03/2001) gkh
-* switched to using port->port.count instead of private version.
-* Removed port->active
-*
-* (04/08/2001) gb
-* Identify version on module load.
-*
-* (11/01/2000) Adam J. Richter
-* usb_device_id table support
-*
-* (11/01/2000) pberger and borchers
-* -- Turned off the USB_DISABLE_SPD flag for write bulk urbs--it caused
-* USB 4 ports to hang on startup.
-* -- Serialized access to write urbs by adding the dp_write_urb_in_use
-* flag; otherwise, the driver caused SMP system hangs. Watching the
-* urb status is not sufficient.
-*
-* (10/05/2000) gkh
-* -- Fixed bug with urb->dev not being set properly, now that the usb
-* core needs it.
-*
-* (8/8/2000) pberger and borchers
-* -- Fixed close so that
-* - it can timeout while waiting for transmit idle, if needed;
-* - it ignores interrupts when flushing the port, turning
-* of modem signalling, and so on;
-* - it waits for the flush to really complete before returning.
-* -- Read_bulk_callback and write_bulk_callback check for a closed
-* port before using the tty struct or writing to the port.
-* -- The two changes above fix the oops caused by interrupted closes.
-* -- Added interruptible args to write_oob_command and set_modem_signals
-* and added a timeout arg to transmit_idle; needed for fixes to
-* close.
-* -- Added code for rx_throttle and rx_unthrottle so that input flow
-* control works.
-* -- Added code to set overrun, parity, framing, and break errors
-* (untested).
-* -- Set USB_DISABLE_SPD flag for write bulk urbs, so no 0 length
-* bulk writes are done. These hung the Digi USB device. The
-* 0 length bulk writes were a new feature of usb-uhci added in
-* the 2.4.0-test6 kernels.
-* -- Fixed mod inc race in open; do mod inc before sleeping to wait
-* for a close to finish.
-*
-* (7/31/2000) pberger
-* -- Fixed bugs with hardware handshaking:
-* - Added code to set/clear tty->hw_stopped in digi_read_oob_callback()
-* and digi_set_termios()
-* -- Added code in digi_set_termios() to
-* - add conditional in code handling transition from B0 to only
-* set RTS if RTS/CTS flow control is either not in use or if
-* the port is not currently throttled.
-* - handle turning off CRTSCTS.
-*
-* (7/30/2000) borchers
-* -- Added support for more than one Digi USB device by moving
-* globals to a private structure in the pointed to from the
-* usb_serial structure.
-* -- Moved the modem change and transmit idle wait queues into
-* the port private structure, so each port has its own queue
-* rather than sharing global queues.
-* -- Added support for break signals.
-*
-* (7/25/2000) pberger
-* -- Added USB-2 support. Note: the USB-2 supports 3 devices: two
-* serial and a parallel port. The parallel port is implemented
-* as a serial-to-parallel converter. That is, the driver actually
-* presents all three USB-2 interfaces as serial ports, but the third
-* one physically connects to a parallel device. Thus, for example,
-* one could plug a parallel printer into the USB-2's third port,
-* but from the kernel's (and userland's) point of view what's
-* actually out there is a serial device.
-*
-* (7/15/2000) borchers
-* -- Fixed race in open when a close is in progress.
-* -- Keep count of opens and dec the module use count for each
-* outstanding open when shutdown is called (on disconnect).
-* -- Fixed sanity checks in read_bulk_callback and write_bulk_callback
-* so pointers are checked before use.
-* -- Split read bulk callback into in band and out of band
-* callbacks, and no longer restart read chains if there is
-* a status error or a sanity error. This fixed the seg
-* faults and other errors we used to get on disconnect.
-* -- Port->active is once again a flag as usb-serial intended it
-* to be, not a count. Since it was only a char it would
-* have been limited to 256 simultaneous opens. Now the open
-* count is kept in the port private structure in dp_open_count.
-* -- Added code for modularization of the digi_acceleport driver.
-*
-* (6/27/2000) pberger and borchers
-* -- Zeroed out sync field in the wakeup_task before first use;
-* otherwise the uninitialized value might prevent the task from
-* being scheduled.
-* -- Initialized ret value to 0 in write_bulk_callback, otherwise
-* the uninitialized value could cause a spurious debugging message.
-*
-* (6/22/2000) pberger and borchers
-* -- Made cond_wait_... inline--apparently on SPARC the flags arg
-* to spin_lock_irqsave cannot be passed to another function
-* to call spin_unlock_irqrestore. Thanks to Pauline Middelink.
-* -- In digi_set_modem_signals the inner nested spin locks use just
-* spin_lock() rather than spin_lock_irqsave(). The old code
-* mistakenly left interrupts off. Thanks to Pauline Middelink.
-* -- copy_from_user (which can sleep) is no longer called while a
-* spinlock is held. We copy to a local buffer before getting
-* the spinlock--don't like the extra copy but the code is simpler.
-* -- Printk and dbg are no longer called while a spin lock is held.
-*
-* (6/4/2000) pberger and borchers
-* -- Replaced separate calls to spin_unlock_irqrestore and
-* interruptible_sleep_on_timeout with a new function
-* cond_wait_interruptible_timeout_irqrestore. This eliminates
-* the race condition where the wake up could happen after
-* the unlock and before the sleep.
-* -- Close now waits for output to drain.
-* -- Open waits until any close in progress is finished.
-* -- All out of band responses are now processed, not just the
-* first in a USB packet.
-* -- Fixed a bug that prevented the driver from working when the
-* first Digi port was not the first USB serial port--the driver
-* was mistakenly using the external USB serial port number to
-* try to index into its internal ports.
-* -- Fixed an SMP bug -- write_bulk_callback is called directly from
-* an interrupt, so spin_lock_irqsave/spin_unlock_irqrestore are
-* needed for locks outside write_bulk_callback that are also
-* acquired by write_bulk_callback to prevent deadlocks.
-* -- Fixed support for select() by making digi_chars_in_buffer()
-* return 256 when -EINPROGRESS is set, as the line discipline
-* code in n_tty.c expects.
-* -- Fixed an include file ordering problem that prevented debugging
-* messages from working.
-* -- Fixed an intermittent timeout problem that caused writes to
-* sometimes get stuck on some machines on some kernels. It turns
-* out in these circumstances write_chan() (in n_tty.c) was
-* asleep waiting for our wakeup call. Even though we call
-* wake_up_interruptible() in digi_write_bulk_callback(), there is
-* a race condition that could cause the wakeup to fail: if our
-* wake_up_interruptible() call occurs between the time that our
-* driver write routine finishes and write_chan() sets current->state
-* to TASK_INTERRUPTIBLE, the effect of our wakeup setting the state
-* to TASK_RUNNING will be lost and write_chan's subsequent call to
-* schedule() will never return (unless it catches a signal).
-* This race condition occurs because write_bulk_callback() (and thus
-* the wakeup) are called asynchronously from an interrupt, rather than
-* from the scheduler. We can avoid the race by calling the wakeup
-* from the scheduler queue and that's our fix: Now, at the end of
-* write_bulk_callback() we queue up a wakeup call on the scheduler
-* task queue. We still also invoke the wakeup directly since that
-* squeezes a bit more performance out of the driver, and any lost
-* race conditions will get cleaned up at the next scheduler run.
-*
-* NOTE: The problem also goes away if you comment out
-* the two code lines in write_chan() where current->state
-* is set to TASK_RUNNING just before calling driver.write() and to
-* TASK_INTERRUPTIBLE immediately afterwards. This is why the
-* problem did not show up with the 2.2 kernels -- they do not
-* include that code.
-*
-* (5/16/2000) pberger and borchers
-* -- Added timeouts to sleeps, to defend against lost wake ups.
-* -- Handle transition to/from B0 baud rate in digi_set_termios.
-*
-* (5/13/2000) pberger and borchers
-* -- All commands now sent on out of band port, using
-* digi_write_oob_command.
-* -- Get modem control signals whenever they change, support TIOCMGET/
-* SET/BIS/BIC ioctls.
-* -- digi_set_termios now supports parity, word size, stop bits, and
-* receive enable.
-* -- Cleaned up open and close, use digi_set_termios and
-* digi_write_oob_command to set port parameters.
-* -- Added digi_startup_device to start read chains on all ports.
-* -- Write buffer is only used when count==1, to be sure put_char can
-* write a char (unless the buffer is full).
-*
-* (5/10/2000) pberger and borchers
-* -- Added MOD_INC_USE_COUNT/MOD_DEC_USE_COUNT calls on open/close.
-* -- Fixed problem where the first incoming character is lost on
-* port opens after the first close on that port. Now we keep
-* the read_urb chain open until shutdown.
-* -- Added more port conditioning calls in digi_open and digi_close.
-* -- Convert port->active to a use count so that we can deal with multiple
-* opens and closes properly.
-* -- Fixed some problems with the locking code.
-*
-* (5/3/2000) pberger and borchers
-* -- First alpha version of the driver--many known limitations and bugs.
-*
-*
-* Locking and SMP
-*
-* - Each port, including the out-of-band port, has a lock used to
-* serialize all access to the port's private structure.
-* - The port lock is also used to serialize all writes and access to
-* the port's URB.
-* - The port lock is also used for the port write_wait condition
-* variable. Holding the port lock will prevent a wake up on the
-* port's write_wait; this can be used with cond_wait_... to be sure
-* the wake up is not lost in a race when dropping the lock and
-* sleeping waiting for the wakeup.
-* - digi_write() does not sleep, since it is sometimes called on
-* interrupt time.
-* - digi_write_bulk_callback() and digi_read_bulk_callback() are
-* called directly from interrupts. Hence spin_lock_irqsave()
-* and spin_unlock_irqrestore() are used in the rest of the code
-* for any locks they acquire.
-* - digi_write_bulk_callback() gets the port lock before waking up
-* processes sleeping on the port write_wait. It also schedules
-* wake ups so they happen from the scheduler, because the tty
-* system can miss wake ups from interrupts.
-* - All sleeps use a timeout of DIGI_RETRY_TIMEOUT before looping to
-* recheck the condition they are sleeping on. This is defensive,
-* in case a wake up is lost.
-* - Following Documentation/DocBook/kernel-locking.tmpl no spin locks
-* are held when calling copy_to/from_user or printk.
*/
#include <linux/kernel.h>
@@ -654,7 +438,6 @@
len &= ~3;
memcpy(oob_port->write_urb->transfer_buffer, buf, len);
oob_port->write_urb->transfer_buffer_length = len;
- oob_port->write_urb->dev = port->serial->dev;
ret = usb_submit_urb(oob_port->write_urb, GFP_ATOMIC);
if (ret == 0) {
oob_priv->dp_write_urb_in_use = 1;
@@ -732,7 +515,6 @@
memcpy(data, buf, len);
port->write_urb->transfer_buffer_length = len;
}
- port->write_urb->dev = port->serial->dev;
ret = usb_submit_urb(port->write_urb, GFP_ATOMIC);
if (ret == 0) {
@@ -803,7 +585,6 @@
data[7] = 0;
oob_port->write_urb->transfer_buffer_length = 8;
- oob_port->write_urb->dev = port->serial->dev;
ret = usb_submit_urb(oob_port->write_urb, GFP_ATOMIC);
if (ret == 0) {
@@ -899,10 +680,8 @@
spin_lock_irqsave(&priv->dp_port_lock, flags);
/* restart read chain */
- if (priv->dp_throttle_restart) {
- port->read_urb->dev = port->serial->dev;
+ if (priv->dp_throttle_restart)
ret = usb_submit_urb(port->read_urb, GFP_ATOMIC);
- }
/* turn throttle off */
priv->dp_throttled = 0;
@@ -1195,7 +974,6 @@
}
port->write_urb->transfer_buffer_length = data_len+2;
- port->write_urb->dev = port->serial->dev;
*data++ = DIGI_CMD_SEND_DATA;
*data++ = data_len;
@@ -1271,7 +1049,6 @@
= (unsigned char)priv->dp_out_buf_len;
port->write_urb->transfer_buffer_length =
priv->dp_out_buf_len + 2;
- port->write_urb->dev = serial->dev;
memcpy(port->write_urb->transfer_buffer + 2, priv->dp_out_buf,
priv->dp_out_buf_len);
ret = usb_submit_urb(port->write_urb, GFP_ATOMIC);
@@ -1473,7 +1250,6 @@
/* set USB_DISABLE_SPD flag for write bulk urbs */
for (i = 0; i < serial->type->num_ports + 1; i++) {
port = serial->port[i];
- port->write_urb->dev = port->serial->dev;
ret = usb_submit_urb(port->read_urb, GFP_KERNEL);
if (ret != 0) {
dev_err(&port->dev,
@@ -1616,7 +1392,6 @@
}
/* continue read */
- urb->dev = port->serial->dev;
ret = usb_submit_urb(urb, GFP_ATOMIC);
if (ret != 0 && ret != -EPERM) {
dev_err(&port->dev,
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index ff3db5d..c290df9 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -2105,6 +2105,9 @@
cflag = termios->c_cflag;
+ if (old_termios == 0)
+ goto no_skip;
+
if (old_termios->c_cflag == termios->c_cflag
&& old_termios->c_ispeed == termios->c_ispeed
&& old_termios->c_ospeed == termios->c_ospeed)
@@ -2118,6 +2121,7 @@
(termios->c_cflag & (CSIZE|PARODD|PARENB|CMSPAR|CSTOPB)))
goto no_data_parity_stop_changes;
+no_skip:
/* Set number of data bits, parity, stop bits */
urb_value = 0;
diff --git a/drivers/usb/serial/garmin_gps.c b/drivers/usb/serial/garmin_gps.c
index 1a49ca9..bf12565 100644
--- a/drivers/usb/serial/garmin_gps.c
+++ b/drivers/usb/serial/garmin_gps.c
@@ -901,7 +901,6 @@
usb_kill_urb(port->interrupt_in_urb);
dbg("%s - adding interrupt input", __func__);
- port->interrupt_in_urb->dev = serial->dev;
status = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
if (status)
dev_err(&serial->dev->dev,
@@ -1277,7 +1276,6 @@
unsigned long flags;
int retval;
struct usb_serial_port *port = urb->context;
- struct usb_serial *serial = port->serial;
struct garmin_data *garmin_data_p = usb_get_serial_port_data(port);
unsigned char *data = urb->transfer_buffer;
int status = urb->status;
@@ -1311,12 +1309,6 @@
if (0 == (garmin_data_p->flags & FLAGS_BULK_IN_ACTIVE)) {
/* bulk data available */
- usb_fill_bulk_urb(port->read_urb, serial->dev,
- usb_rcvbulkpipe(serial->dev,
- port->bulk_in_endpointAddress),
- port->read_urb->transfer_buffer,
- port->read_urb->transfer_buffer_length,
- garmin_read_bulk_callback, port);
retval = usb_submit_urb(port->read_urb, GFP_ATOMIC);
if (retval) {
dev_err(&port->dev,
@@ -1353,7 +1345,6 @@
garmin_read_process(garmin_data_p, data, urb->actual_length, 0);
- port->interrupt_in_urb->dev = port->serial->dev;
retval = usb_submit_urb(urb, GFP_ATOMIC);
if (retval)
dev_err(&urb->dev->dev,
diff --git a/drivers/usb/serial/generic.c b/drivers/usb/serial/generic.c
index e4db5ad..f740357 100644
--- a/drivers/usb/serial/generic.c
+++ b/drivers/usb/serial/generic.c
@@ -1,7 +1,7 @@
/*
* USB Serial Converter Generic functions
*
- * Copyright (C) 2010 Johan Hovold (jhovold@gmail.com)
+ * Copyright (C) 2010 - 2011 Johan Hovold (jhovold@gmail.com)
* Copyright (C) 1999 - 2002 Greg Kroah-Hartman (greg@kroah.com)
*
* This program is free software; you can redistribute it and/or
@@ -132,7 +132,7 @@
/* if we have a bulk endpoint, start reading from it */
if (port->bulk_in_size)
- result = usb_serial_generic_submit_read_urb(port, GFP_KERNEL);
+ result = usb_serial_generic_submit_read_urbs(port, GFP_KERNEL);
return result;
}
@@ -157,8 +157,10 @@
kfifo_reset_out(&port->write_fifo);
spin_unlock_irqrestore(&port->lock, flags);
}
- if (port->bulk_in_size)
- usb_kill_urb(port->read_urb);
+ if (port->bulk_in_size) {
+ for (i = 0; i < ARRAY_SIZE(port->read_urbs); ++i)
+ usb_kill_urb(port->read_urbs[i]);
+ }
}
}
@@ -308,19 +310,52 @@
return chars;
}
-int usb_serial_generic_submit_read_urb(struct usb_serial_port *port,
+static int usb_serial_generic_submit_read_urb(struct usb_serial_port *port,
+ int index, gfp_t mem_flags)
+{
+ int res;
+
+ if (!test_and_clear_bit(index, &port->read_urbs_free))
+ return 0;
+
+ dbg("%s - port %d, urb %d\n", __func__, port->number, index);
+
+ res = usb_submit_urb(port->read_urbs[index], mem_flags);
+ if (res) {
+ if (res != -EPERM) {
+ dev_err(&port->dev,
+ "%s - usb_submit_urb failed: %d\n",
+ __func__, res);
+ }
+ set_bit(index, &port->read_urbs_free);
+ return res;
+ }
+
+ return 0;
+}
+
+int usb_serial_generic_submit_read_urbs(struct usb_serial_port *port,
gfp_t mem_flags)
{
- int result;
+ int res;
+ int i;
- result = usb_submit_urb(port->read_urb, mem_flags);
- if (result && result != -EPERM) {
- dev_err(&port->dev, "%s - error submitting urb: %d\n",
- __func__, result);
+ dbg("%s - port %d", __func__, port->number);
+
+ for (i = 0; i < ARRAY_SIZE(port->read_urbs); ++i) {
+ res = usb_serial_generic_submit_read_urb(port, i, mem_flags);
+ if (res)
+ goto err;
}
- return result;
+
+ return 0;
+err:
+ for (; i >= 0; --i)
+ usb_kill_urb(port->read_urbs[i]);
+
+ return res;
}
-EXPORT_SYMBOL_GPL(usb_serial_generic_submit_read_urb);
+EXPORT_SYMBOL_GPL(usb_serial_generic_submit_read_urbs);
void usb_serial_generic_process_read_urb(struct urb *urb)
{
@@ -356,14 +391,19 @@
{
struct usb_serial_port *port = urb->context;
unsigned char *data = urb->transfer_buffer;
- int status = urb->status;
unsigned long flags;
+ int i;
- dbg("%s - port %d", __func__, port->number);
+ for (i = 0; i < ARRAY_SIZE(port->read_urbs); ++i) {
+ if (urb == port->read_urbs[i])
+ break;
+ }
+ set_bit(i, &port->read_urbs_free);
- if (unlikely(status != 0)) {
- dbg("%s - nonzero read bulk status received: %d",
- __func__, status);
+ dbg("%s - port %d, urb %d, len %d\n", __func__, port->number, i,
+ urb->actual_length);
+ if (urb->status) {
+ dbg("%s - non-zero urb status: %d\n", __func__, urb->status);
return;
}
@@ -376,7 +416,7 @@
port->throttled = port->throttle_req;
if (!port->throttled) {
spin_unlock_irqrestore(&port->lock, flags);
- usb_serial_generic_submit_read_urb(port, GFP_ATOMIC);
+ usb_serial_generic_submit_read_urb(port, i, GFP_ATOMIC);
} else
spin_unlock_irqrestore(&port->lock, flags);
}
@@ -443,7 +483,7 @@
spin_unlock_irq(&port->lock);
if (was_throttled)
- usb_serial_generic_submit_read_urb(port, GFP_KERNEL);
+ usb_serial_generic_submit_read_urbs(port, GFP_KERNEL);
}
EXPORT_SYMBOL_GPL(usb_serial_generic_unthrottle);
@@ -509,8 +549,9 @@
if (!test_bit(ASYNCB_INITIALIZED, &port->port.flags))
continue;
- if (port->read_urb) {
- r = usb_submit_urb(port->read_urb, GFP_NOIO);
+ if (port->bulk_in_size) {
+ r = usb_serial_generic_submit_read_urbs(port,
+ GFP_NOIO);
if (r < 0)
c++;
}
diff --git a/drivers/usb/serial/io_edgeport.c b/drivers/usb/serial/io_edgeport.c
index 2ee8075..abd2ee2 100644
--- a/drivers/usb/serial/io_edgeport.c
+++ b/drivers/usb/serial/io_edgeport.c
@@ -610,7 +610,6 @@
/* we have pending bytes on the
bulk in pipe, send a request */
- edge_serial->read_urb->dev = edge_serial->serial->dev;
result = usb_submit_urb(edge_serial->read_urb, GFP_ATOMIC);
if (result) {
dev_err(&edge_serial->serial->dev->dev, "%s - usb_submit_urb(read bulk) failed with result = %d\n", __func__, result);
@@ -711,7 +710,6 @@
/* check to see if there's any more data for us to read */
if (edge_serial->rxBytesAvail > 0) {
dbg("%s - posting a read", __func__);
- edge_serial->read_urb->dev = edge_serial->serial->dev;
retval = usb_submit_urb(edge_serial->read_urb, GFP_ATOMIC);
if (retval) {
dev_err(&urb->dev->dev,
@@ -1330,7 +1328,6 @@
edge_port->txCredits -= count;
edge_port->icount.tx += count;
- urb->dev = edge_serial->serial->dev;
status = usb_submit_urb(urb, GFP_ATOMIC);
if (status) {
/* something went wrong */
diff --git a/drivers/usb/serial/io_ti.c b/drivers/usb/serial/io_ti.c
index 0aac00a..e44d375 100644
--- a/drivers/usb/serial/io_ti.c
+++ b/drivers/usb/serial/io_ti.c
@@ -15,13 +15,6 @@
* For questions or problems with this driver, contact Inside Out
* Networks technical support, or Peter Berger <pberger@brimson.com>,
* or Al Borchers <alborchers@steinerpoint.com>.
- *
- * Version history:
- *
- * July 11, 2002 Removed 4 port device structure since all TI UMP
- * chips have only 2 ports
- * David Iacovelli (davidi@ionetworks.com)
- *
*/
#include <linux/kernel.h>
@@ -1777,12 +1770,11 @@
exit:
/* continue read unless stopped */
spin_lock(&edge_port->ep_lock);
- if (edge_port->ep_read_urb_state == EDGE_READ_URB_RUNNING) {
- urb->dev = edge_port->port->serial->dev;
+ if (edge_port->ep_read_urb_state == EDGE_READ_URB_RUNNING)
retval = usb_submit_urb(urb, GFP_ATOMIC);
- } else if (edge_port->ep_read_urb_state == EDGE_READ_URB_STOPPING) {
+ else if (edge_port->ep_read_urb_state == EDGE_READ_URB_STOPPING)
edge_port->ep_read_urb_state = EDGE_READ_URB_STOPPED;
- }
+
spin_unlock(&edge_port->ep_lock);
if (retval)
dev_err(&urb->dev->dev,
@@ -1959,9 +1951,7 @@
status = -EINVAL;
goto release_es_lock;
}
- urb->complete = edge_interrupt_callback;
urb->context = edge_serial;
- urb->dev = dev;
status = usb_submit_urb(urb, GFP_KERNEL);
if (status) {
dev_err(&port->dev,
@@ -1987,9 +1977,7 @@
goto unlink_int_urb;
}
edge_port->ep_read_urb_state = EDGE_READ_URB_RUNNING;
- urb->complete = edge_bulk_in_callback;
urb->context = edge_port;
- urb->dev = dev;
status = usb_submit_urb(urb, GFP_KERNEL);
if (status) {
dev_err(&port->dev,
@@ -2118,12 +2106,7 @@
port->write_urb->transfer_buffer);
/* set up our urb */
- usb_fill_bulk_urb(port->write_urb, port->serial->dev,
- usb_sndbulkpipe(port->serial->dev,
- port->bulk_out_endpointAddress),
- port->write_urb->transfer_buffer, count,
- edge_bulk_out_callback,
- port);
+ port->write_urb->transfer_buffer_length = count;
/* send the data out the bulk port */
result = usb_submit_urb(port->write_urb, GFP_ATOMIC);
@@ -2267,9 +2250,6 @@
if (edge_port->ep_read_urb_state == EDGE_READ_URB_STOPPED) {
urb = edge_port->port->read_urb;
- urb->complete = edge_bulk_in_callback;
- urb->context = edge_port;
- urb->dev = edge_port->port->serial->dev;
status = usb_submit_urb(urb, GFP_ATOMIC);
}
edge_port->ep_read_urb_state = EDGE_READ_URB_RUNNING;
diff --git a/drivers/usb/serial/ipaq.c b/drivers/usb/serial/ipaq.c
index 4735931..36f5cbe 100644
--- a/drivers/usb/serial/ipaq.c
+++ b/drivers/usb/serial/ipaq.c
@@ -8,40 +8,6 @@
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
- *
- * (12/12/2002) ganesh
- * Added support for practically all devices supported by ActiveSync
- * on Windows. Thanks to Wes Cilldhaire <billybobjoehenrybob@hotmail.com>.
- *
- * (26/11/2002) ganesh
- * Added insmod options to specify product and vendor id.
- * Use modprobe ipaq vendor=0xfoo product=0xbar
- *
- * (26/7/2002) ganesh
- * Fixed up broken error handling in ipaq_open. Retry the "kickstart"
- * packet much harder - this drastically reduces connection failures.
- *
- * (30/4/2002) ganesh
- * Added support for the Casio EM500. Completely untested. Thanks
- * to info from Nathan <wfilardo@fuse.net>
- *
- * (19/3/2002) ganesh
- * Don't submit urbs while holding spinlocks. Not strictly necessary
- * in 2.5.x.
- *
- * (8/3/2002) ganesh
- * The ipaq sometimes emits a '\0' before the CLIENT string. At this
- * point of time, the ppp ldisc is not yet attached to the tty, so
- * n_tty echoes "^ " to the ipaq, which messes up the chat. In 2.5.6-pre2
- * this causes a panic because echo_char() tries to sleep in interrupt
- * context.
- * The fix is to tell the upper layers that this is a raw device so that
- * echoing is suppressed. Thanks to Lyle Lindholm for a detailed bug
- * report.
- *
- * (25/2/2002) ganesh
- * Added support for the HP Jornada 548 and 568. Completely untested.
- * Thanks to info from Heath Robinson and Arieh Davidoff.
*/
#include <linux/kernel.h>
diff --git a/drivers/usb/serial/ir-usb.c b/drivers/usb/serial/ir-usb.c
index ccbce40..0c537da 100644
--- a/drivers/usb/serial/ir-usb.c
+++ b/drivers/usb/serial/ir-usb.c
@@ -22,38 +22,6 @@
*
* See Documentation/usb/usb-serial.txt for more information on using this
* driver
- *
- * 2008_Jun_02 Felipe Balbi <me@felipebalbi.com>
- * Introduced common header to be used also in USB Gadget Framework.
- * Still needs some other style fixes.
- *
- * 2007_Jun_21 Alan Cox <alan@lxorguk.ukuu.org.uk>
- * Minimal cleanups for some of the driver problens and tty layer abuse.
- * Still needs fixing to allow multiple dongles.
- *
- * 2002_Mar_07 greg kh
- * moved some needed structures and #define values from the
- * net/irda/irda-usb.h file into our file, as we don't want to depend on
- * that codebase compiling correctly :)
- *
- * 2002_Jan_14 gb
- * Added module parameter to force specific number of XBOFs.
- * Added ir_xbof_change().
- * Reorganized read_bulk_callback error handling.
- * Switched from FILL_BULK_URB() to usb_fill_bulk_urb().
- *
- * 2001_Nov_08 greg kh
- * Changed the irda_usb_find_class_desc() function based on comments and
- * code from Martin Diehl.
- *
- * 2001_Nov_01 greg kh
- * Added support for more IrDA USB devices.
- * Added support for zero packet. Added buffer override paramater, so
- * users can transfer larger packets at once if they wish. Both patches
- * came from Dag Brattli <dag@obexcode.com>.
- *
- * 2001_Oct_07 greg kh
- * initial version released.
*/
#include <linux/kernel.h>
diff --git a/drivers/usb/serial/iuu_phoenix.c b/drivers/usb/serial/iuu_phoenix.c
index 6aca631..64d0ffd 100644
--- a/drivers/usb/serial/iuu_phoenix.c
+++ b/drivers/usb/serial/iuu_phoenix.c
@@ -1168,15 +1168,14 @@
port->write_urb->transfer_buffer, 1,
read_rxcmd_callback, port);
result = usb_submit_urb(port->write_urb, GFP_KERNEL);
-
if (result) {
dev_err(&port->dev, "%s - failed submitting read urb,"
" error %d\n", __func__, result);
iuu_close(port);
- return -EPROTO;
} else {
dbg("%s - rxcmd OK", __func__);
}
+
return result;
}
diff --git a/drivers/usb/serial/keyspan.c b/drivers/usb/serial/keyspan.c
index a442352..bc8dc20 100644
--- a/drivers/usb/serial/keyspan.c
+++ b/drivers/usb/serial/keyspan.c
@@ -25,73 +25,6 @@
Tip 'o the hat to IBM (and previously Linuxcare :) for supporting
staff in their work on open source projects.
-
- Change History
-
- 2003sep04 LPM (Keyspan) add support for new single port product USA19HS.
- Improve setup message handling for all devices.
-
- Wed Feb 19 22:00:00 PST 2003 (Jeffrey S. Laing <keyspan@jsl.com>)
- Merged the current (1/31/03) Keyspan code with the current (2.4.21-pre4)
- Linux source tree. The Linux tree lacked support for the 49WLC and
- others. The Keyspan patches didn't work with the current kernel.
-
- 2003jan30 LPM add support for the 49WLC and MPR
-
- Wed Apr 25 12:00:00 PST 2002 (Keyspan)
- Started with Hugh Blemings' code dated Jan 17, 2002. All adapters
- now supported (including QI and QW). Modified port open, port
- close, and send setup() logic to fix various data and endpoint
- synchronization bugs and device LED status bugs. Changed keyspan_
- write_room() to accurately return transmit buffer availability.
- Changed forwardingLength from 1 to 16 for all adapters.
-
- Fri Oct 12 16:45:00 EST 2001
- Preliminary USA-19QI and USA-28 support (both test OK for me, YMMV)
-
- Wed Apr 25 12:00:00 PST 2002 (Keyspan)
- Started with Hugh Blemings' code dated Jan 17, 2002. All adapters
- now supported (including QI and QW). Modified port open, port
- close, and send setup() logic to fix various data and endpoint
- synchronization bugs and device LED status bugs. Changed keyspan_
- write_room() to accurately return transmit buffer availability.
- Changed forwardingLength from 1 to 16 for all adapters.
-
- Fri Oct 12 16:45:00 EST 2001
- Preliminary USA-19QI and USA-28 support (both test OK for me, YMMV)
-
- Mon Oct 8 14:29:00 EST 2001 hugh
- Fixed bug that prevented mulitport devices operating correctly
- if they weren't the first unit attached.
-
- Sat Oct 6 12:31:21 EST 2001 hugh
- Added support for USA-28XA and -28XB, misc cleanups, break support
- for usa26 based models thanks to David Gibson.
-
- Thu May 31 11:56:42 PDT 2001 gkh
- switched from using spinlock to a semaphore
-
- (04/08/2001) gb
- Identify version on module load.
-
- (11/01/2000) Adam J. Richter
- usb_device_id table support.
-
- Tue Oct 10 23:15:33 EST 2000 Hugh
- Merged Paul's changes with my USA-49W mods. Work in progress
- still...
-
- Wed Jul 19 14:00:42 EST 2000 gkh
- Added module_init and module_exit functions to handle the fact that
- this driver is a loadable module now.
-
- Tue Jul 18 16:14:52 EST 2000 Hugh
- Basic character input/output for USA-19 now mostly works,
- fixed at 9600 baud for the moment.
-
- Sat Jul 8 11:11:48 EST 2000 Hugh
- First public release - nothing works except the firmware upload.
- Tested on PPC and x86 architectures, seems to behave...
*/
@@ -397,7 +330,6 @@
/* send the data out the bulk port */
this_urb->transfer_buffer_length = todo + dataOffset;
- this_urb->dev = port->serial->dev;
err = usb_submit_urb(this_urb, GFP_ATOMIC);
if (err != 0)
dbg("usb_submit_urb(write bulk) failed (%d)", err);
@@ -463,7 +395,6 @@
tty_kref_put(tty);
/* Resubmit urb so we continue receiving */
- urb->dev = port->serial->dev;
err = usb_submit_urb(urb, GFP_ATOMIC);
if (err != 0)
dbg("%s - resubmit read urb failed. (%d)", __func__, err);
@@ -559,7 +490,6 @@
}
/* Resubmit urb so we continue receiving */
- urb->dev = serial->dev;
err = usb_submit_urb(urb, GFP_ATOMIC);
if (err != 0)
dbg("%s - resubmit read urb failed. (%d)", __func__, err);
@@ -609,7 +539,6 @@
tty_kref_put(tty);
/* Resubmit urb so we continue receiving */
- urb->dev = port->serial->dev;
err = usb_submit_urb(urb, GFP_ATOMIC);
if (err != 0)
dbg("%s - resubmit read urb failed. (%d)",
@@ -694,7 +623,6 @@
}
/* Resubmit urb so we continue receiving */
- urb->dev = serial->dev;
err = usb_submit_urb(urb, GFP_ATOMIC);
if (err != 0)
dbg("%s - resubmit read urb failed. (%d)", __func__, err);
@@ -789,8 +717,6 @@
}
/* Resubmit urb so we continue receiving */
- urb->dev = serial->dev;
-
err = usb_submit_urb(urb, GFP_ATOMIC);
if (err != 0)
dbg("%s - resubmit read urb failed. (%d)", __func__, err);
@@ -848,7 +774,6 @@
tty_kref_put(tty);
/* Resubmit urb so we continue receiving */
- urb->dev = port->serial->dev;
err = usb_submit_urb(urb, GFP_ATOMIC);
if (err != 0)
dbg("%s - resubmit read urb failed. (%d)", __func__, err);
@@ -919,8 +844,6 @@
}
/* Resubmit urb so we continue receiving */
- urb->dev = serial->dev;
-
err = usb_submit_urb(urb, GFP_ATOMIC);
if (err != 0)
dbg("%s - resubmit read urb failed. (%d)", __func__, err);
@@ -996,7 +919,6 @@
}
/* Resubmit urb so we continue receiving */
- urb->dev = port->serial->dev;
err = usb_submit_urb(urb, GFP_ATOMIC);
if (err != 0)
dbg("%s - resubmit read urb failed. (%d)", __func__, err);
@@ -1047,7 +969,6 @@
}
/* Resubmit urb so we continue receiving */
- urb->dev = serial->dev;
err = usb_submit_urb(urb, GFP_ATOMIC);
if (err != 0)
dbg("%s - resubmit read urb failed. (%d)", __func__, err);
@@ -1123,7 +1044,6 @@
}
/* Resubmit urb so we continue receiving */
- urb->dev = serial->dev;
err = usb_submit_urb(urb, GFP_ATOMIC);
if (err != 0)
dbg("%s - resubmit read urb failed. (%d)", __func__, err);
@@ -1223,7 +1143,6 @@
urb = p_priv->in_urbs[i];
if (urb == NULL)
continue;
- urb->dev = serial->dev;
/* make sure endpoint data toggle is synchronized
with the device */
@@ -1239,7 +1158,6 @@
urb = p_priv->out_urbs[i];
if (urb == NULL)
continue;
- urb->dev = serial->dev;
/* usb_settoggle(urb->dev, usb_pipeendpoint(urb->pipe),
usb_pipeout(urb->pipe), 0); */
}
@@ -1956,7 +1874,6 @@
/* send the data out the device on control endpoint */
this_urb->transfer_buffer_length = sizeof(msg);
- this_urb->dev = serial->dev;
err = usb_submit_urb(this_urb, GFP_ATOMIC);
if (err != 0)
dbg("%s - usb_submit_urb(setup) failed (%d)", __func__, err);
@@ -2084,7 +2001,6 @@
/* send the data out the device on control endpoint */
this_urb->transfer_buffer_length = sizeof(msg);
- this_urb->dev = serial->dev;
err = usb_submit_urb(this_urb, GFP_ATOMIC);
if (err != 0)
dbg("%s - usb_submit_urb(setup) failed", __func__);
@@ -2271,8 +2187,6 @@
/* send the data out the device on control endpoint */
this_urb->transfer_buffer_length = sizeof(msg);
-
- this_urb->dev = serial->dev;
}
err = usb_submit_urb(this_urb, GFP_ATOMIC);
if (err != 0)
@@ -2415,7 +2329,6 @@
/* send the data out the device on control endpoint */
this_urb->transfer_buffer_length = sizeof(msg);
- this_urb->dev = serial->dev;
err = usb_submit_urb(this_urb, GFP_ATOMIC);
if (err != 0)
dbg("%s - usb_submit_urb(setup) failed (%d)", __func__, err);
@@ -2561,7 +2474,6 @@
/* send the data out the device on control endpoint */
this_urb->transfer_buffer_length = sizeof(msg);
- this_urb->dev = serial->dev;
err = usb_submit_urb(this_urb, GFP_ATOMIC);
if (err != 0)
@@ -2650,14 +2562,12 @@
keyspan_setup_urbs(serial);
if (s_priv->instat_urb != NULL) {
- s_priv->instat_urb->dev = serial->dev;
err = usb_submit_urb(s_priv->instat_urb, GFP_KERNEL);
if (err != 0)
dbg("%s - submit instat urb failed %d", __func__,
err);
}
if (s_priv->indat_urb != NULL) {
- s_priv->indat_urb->dev = serial->dev;
err = usb_submit_urb(s_priv->indat_urb, GFP_KERNEL);
if (err != 0)
dbg("%s - submit indat urb failed %d", __func__,
diff --git a/drivers/usb/serial/keyspan_pda.c b/drivers/usb/serial/keyspan_pda.c
index d5c0c6a..a406156 100644
--- a/drivers/usb/serial/keyspan_pda.c
+++ b/drivers/usb/serial/keyspan_pda.c
@@ -12,59 +12,6 @@
*
* See Documentation/usb/usb-serial.txt for more information on using this
* driver
- *
- * (09/07/2001) gkh
- * cleaned up the Xircom support. Added ids for Entregra device which is
- * the same as the Xircom device. Enabled the code to be compiled for
- * either Xircom or Keyspan devices.
- *
- * (08/11/2001) Cristian M. Craciunescu
- * support for Xircom PGSDB9
- *
- * (05/31/2001) gkh
- * switched from using spinlock to a semaphore, which fixes lots of
- * problems.
- *
- * (04/08/2001) gb
- * Identify version on module load.
- *
- * (11/01/2000) Adam J. Richter
- * usb_device_id table support
- *
- * (10/05/2000) gkh
- * Fixed bug with urb->dev not being set properly, now that the usb
- * core needs it.
- *
- * (08/28/2000) gkh
- * Added locks for SMP safeness.
- * Fixed MOD_INC and MOD_DEC logic and the ability to open a port more
- * than once.
- *
- * (07/20/2000) borchers
- * - keyspan_pda_write no longer sleeps if it is called on interrupt time;
- * PPP and the line discipline with stty echo on can call write on
- * interrupt time and this would cause an oops if write slept
- * - if keyspan_pda_write is in an interrupt, it will not call
- * usb_control_msg (which sleeps) to query the room in the device
- * buffer, it simply uses the current room value it has
- * - if the urb is busy or if it is throttled keyspan_pda_write just
- * returns 0, rather than sleeping to wait for this to change; the
- * write_chan code in n_tty.c will sleep if needed before calling
- * keyspan_pda_write again
- * - if the device needs to be unthrottled, write now queues up the
- * call to usb_control_msg (which sleeps) to unthrottle the device
- * - the wakeups from keyspan_pda_write_bulk_callback are queued rather
- * than done directly from the callback to avoid the race in write_chan
- * - keyspan_pda_chars_in_buffer also indicates its buffer is full if the
- * urb status is -EINPROGRESS, meaning it cannot write at the moment
- *
- * (07/19/2000) gkh
- * Added module_init and module_exit functions to handle the fact that this
- * driver is a loadable module now.
- *
- * (03/26/2000) gkh
- * Split driver up into device specific pieces.
- *
*/
@@ -290,7 +237,6 @@
struct usb_serial_port *port = tty->driver_data;
/* just restart the receive interrupt URB */
dbg("keyspan_pda_rx_unthrottle port %d", port->number);
- port->interrupt_in_urb->dev = port->serial->dev;
if (usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL))
dbg(" usb_submit_urb(read urb) failed");
}
@@ -532,11 +478,11 @@
the device is full (wait until it says there is room)
*/
spin_lock_bh(&port->lock);
- if (port->write_urb_busy || priv->tx_throttled) {
+ if (!test_bit(0, &port->write_urbs_free) || priv->tx_throttled) {
spin_unlock_bh(&port->lock);
return 0;
}
- port->write_urb_busy = 1;
+ clear_bit(0, &port->write_urbs_free);
spin_unlock_bh(&port->lock);
/* At this point the URB is in our control, nobody else can submit it
@@ -598,7 +544,6 @@
priv->tx_room -= count;
- port->write_urb->dev = port->serial->dev;
rc = usb_submit_urb(port->write_urb, GFP_ATOMIC);
if (rc) {
dbg(" usb_submit_urb(write bulk) failed");
@@ -618,7 +563,7 @@
rc = count;
exit:
if (rc < 0)
- port->write_urb_busy = 0;
+ set_bit(0, &port->write_urbs_free);
return rc;
}
@@ -628,7 +573,7 @@
struct usb_serial_port *port = urb->context;
struct keyspan_pda_private *priv;
- port->write_urb_busy = 0;
+ set_bit(0, &port->write_urbs_free);
priv = usb_get_serial_port_data(port);
/* queue up a wakeup at scheduler time */
@@ -661,7 +606,7 @@
n_tty.c:normal_poll() ) that we're not writeable. */
spin_lock_irqsave(&port->lock, flags);
- if (port->write_urb_busy || priv->tx_throttled)
+ if (!test_bit(0, &port->write_urbs_free) || priv->tx_throttled)
ret = 256;
spin_unlock_irqrestore(&port->lock, flags);
return ret;
@@ -717,7 +662,6 @@
priv->tx_throttled = *room ? 0 : 1;
/*Start reading from the device*/
- port->interrupt_in_urb->dev = serial->dev;
rc = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
if (rc) {
dbg("%s - usb_submit_urb(read int) failed", __func__);
diff --git a/drivers/usb/serial/kobil_sct.c b/drivers/usb/serial/kobil_sct.c
index ddd1463..5d3beee 100644
--- a/drivers/usb/serial/kobil_sct.c
+++ b/drivers/usb/serial/kobil_sct.c
@@ -20,18 +20,6 @@
*
* Supported readers: USB TWIN, KAAN Standard Plus and SecOVID Reader Plus
* (Adapter K), B1 Professional and KAAN Professional (Adapter B)
- *
- * (21/05/2004) tw
- * Fix bug with P'n'P readers
- *
- * (28/05/2003) tw
- * Add support for KAAN SIM
- *
- * (12/09/2002) tw
- * Adapted to 2.5.
- *
- * (11/08/2002) tw
- * Initial version.
*/
@@ -231,9 +219,6 @@
dbg("%s - port %d", __func__, port->number);
priv = usb_get_serial_port_data(port);
- /* someone sets the dev to 0 if the close method has been called */
- port->interrupt_in_urb->dev = port->serial->dev;
-
/* allocate memory for transfer buffer */
transfer_buffer = kzalloc(transfer_buffer_length, GFP_KERNEL);
if (!transfer_buffer)
@@ -393,8 +378,6 @@
tty_flip_buffer_push(tty);
}
tty_kref_put(tty);
- /* someone sets the dev to 0 if the close method has been called */
- port->interrupt_in_urb->dev = port->serial->dev;
result = usb_submit_urb(port->interrupt_in_urb, GFP_ATOMIC);
dbg("%s - port %d Send read URB returns: %i",
@@ -475,17 +458,9 @@
priv->filled = 0;
priv->cur_pos = 0;
- /* someone sets the dev to 0 if the close method
- has been called */
- port->interrupt_in_urb->dev = port->serial->dev;
-
/* start reading (except TWIN and KAAN SIM) */
if (priv->device_type == KOBIL_ADAPTER_B_PRODUCT_ID ||
priv->device_type == KOBIL_ADAPTER_K_PRODUCT_ID) {
- /* someone sets the dev to 0 if the close method has
- been called */
- port->interrupt_in_urb->dev = port->serial->dev;
-
result = usb_submit_urb(port->interrupt_in_urb,
GFP_NOIO);
dbg("%s - port %d Send read URB returns: %i",
diff --git a/drivers/usb/serial/mct_u232.c b/drivers/usb/serial/mct_u232.c
index ba0d287..a975bb8 100644
--- a/drivers/usb/serial/mct_u232.c
+++ b/drivers/usb/serial/mct_u232.c
@@ -19,50 +19,6 @@
* DTR/RTS signal handling may be incomplete or incorrect. I have mainly
* implemented what I have seen with SniffUSB or found in belkin_sa.c.
* For further TODOs check also belkin_sa.c.
- *
- * TEST STATUS:
- * Basic tests have been performed with minicom/zmodem transfers and
- * modem dialing under Linux 2.4.0-test10 (for me it works fine).
- *
- * 04-Nov-2003 Bill Marr <marr at flex dot com>
- * - Mimic Windows driver by sending 2 USB 'device request' messages
- * following normal 'baud rate change' message. This allows data to be
- * transmitted to RS-232 devices which don't assert the 'CTS' signal.
- *
- * 10-Nov-2001 Wolfgang Grandegger
- * - Fixed an endianess problem with the baudrate selection for PowerPC.
- *
- * 06-Dec-2001 Martin Hamilton <martinh@gnu.org>
- * - Added support for the Belkin F5U109 DB9 adaptor
- *
- * 30-May-2001 Greg Kroah-Hartman
- * - switched from using spinlock to a semaphore, which fixes lots of
- * problems.
- *
- * 04-May-2001 Stelian Pop
- * - Set the maximum bulk output size for Sitecom U232-P25 model to 16 bytes
- * instead of the device reported 32 (using 32 bytes causes many data
- * loss, Windows driver uses 16 too).
- *
- * 02-May-2001 Stelian Pop
- * - Fixed the baud calculation for Sitecom U232-P25 model
- *
- * 08-Apr-2001 gb
- * - Identify version on module load.
- *
- * 06-Jan-2001 Cornel Ciocirlan
- * - Added support for Sitecom U232-P25 model (Product Id 0x0230)
- * - Added support for D-Link DU-H3SP USB BAY (Product Id 0x0200)
- *
- * 29-Nov-2000 Greg Kroah-Hartman
- * - Added device id table to fit with 2.4.0-test11 structure.
- * - took out DEAL_WITH_TWO_INT_IN_ENDPOINTS #define as it's not needed
- * (lots of things will change if/when the usb-serial core changes to
- * handle these issues.
- *
- * 27-Nov-2000 Wolfgang Grandegge
- * A version for kernel 2.4.0-test10 released to the Linux community
- * (via linux-usb-devel).
*/
#include <linux/kernel.h>
@@ -526,7 +482,6 @@
mct_u232_msr_to_state(&priv->control_state, priv->last_msr);
spin_unlock_irqrestore(&priv->lock, flags);
- port->read_urb->dev = port->serial->dev;
retval = usb_submit_urb(port->read_urb, GFP_KERNEL);
if (retval) {
dev_err(&port->dev,
@@ -535,7 +490,6 @@
goto error;
}
- port->interrupt_in_urb->dev = port->serial->dev;
retval = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
if (retval) {
usb_kill_urb(port->read_urb);
diff --git a/drivers/usb/serial/mos7720.c b/drivers/usb/serial/mos7720.c
index 3524a10..19d112f 100644
--- a/drivers/usb/serial/mos7720.c
+++ b/drivers/usb/serial/mos7720.c
@@ -939,14 +939,7 @@
}
tty_kref_put(tty);
- if (!port->read_urb) {
- dbg("URB KILLED !!!");
- return;
- }
-
if (port->read_urb->status != -EINPROGRESS) {
- port->read_urb->dev = port->serial->dev;
-
retval = usb_submit_urb(port->read_urb, GFP_ATOMIC);
if (retval)
dbg("usb_submit_urb(read bulk) failed, retval = %d",
@@ -1014,7 +1007,6 @@
static int mos7720_open(struct tty_struct *tty, struct usb_serial_port *port)
{
struct usb_serial *serial;
- struct usb_serial_port *port0;
struct urb *urb;
struct moschip_port *mos7720_port;
int response;
@@ -1029,8 +1021,6 @@
if (mos7720_port == NULL)
return -ENODEV;
- port0 = serial->port[0];
-
usb_clear_halt(serial->dev, port->write_urb->pipe);
usb_clear_halt(serial->dev, port->read_urb->pipe);
@@ -1735,8 +1725,6 @@
write_mos_reg(serial, port_number, IER, 0x0c);
if (port->read_urb->status != -EINPROGRESS) {
- port->read_urb->dev = serial->dev;
-
status = usb_submit_urb(port->read_urb, GFP_ATOMIC);
if (status)
dbg("usb_submit_urb(read bulk) failed, status = %d",
@@ -1786,13 +1774,7 @@
/* change the port settings to the new ones specified */
change_port_settings(tty, mos7720_port, old_termios);
- if (!port->read_urb) {
- dbg("%s", "URB KILLED !!!!!");
- return;
- }
-
if (port->read_urb->status != -EINPROGRESS) {
- port->read_urb->dev = serial->dev;
status = usb_submit_urb(port->read_urb, GFP_ATOMIC);
if (status)
dbg("usb_submit_urb(read bulk) failed, status = %d",
diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c
index c72abd5..55cfd62 100644
--- a/drivers/usb/serial/mos7840.c
+++ b/drivers/usb/serial/mos7840.c
@@ -792,8 +792,6 @@
}
- mos7840_port->read_urb->dev = serial->dev;
-
mos7840_port->read_urb_busy = true;
retval = usb_submit_urb(mos7840_port->read_urb, GFP_ATOMIC);
@@ -2058,7 +2056,6 @@
mos7840_set_uart_reg(port, INTERRUPT_ENABLE_REGISTER, Data);
if (mos7840_port->read_urb_busy == false) {
- mos7840_port->read_urb->dev = serial->dev;
mos7840_port->read_urb_busy = true;
status = usb_submit_urb(mos7840_port->read_urb, GFP_ATOMIC);
if (status) {
@@ -2130,7 +2127,6 @@
}
if (mos7840_port->read_urb_busy == false) {
- mos7840_port->read_urb->dev = serial->dev;
mos7840_port->read_urb_busy = true;
status = usb_submit_urb(mos7840_port->read_urb, GFP_ATOMIC);
if (status) {
diff --git a/drivers/usb/serial/omninet.c b/drivers/usb/serial/omninet.c
index 60f38d5..45a8c55 100644
--- a/drivers/usb/serial/omninet.c
+++ b/drivers/usb/serial/omninet.c
@@ -9,31 +9,6 @@
* driver
*
* Please report both successes and troubles to the author at omninet@kroah.com
- *
- * (05/30/2001) gkh
- * switched from using spinlock to a semaphore, which fixes lots of
- * problems.
- *
- * (04/08/2001) gb
- * Identify version on module load.
- *
- * (11/01/2000) Adam J. Richter
- * usb_device_id table support
- *
- * (10/05/2000) gkh
- * Fixed bug with urb->dev not being set properly, now that the usb
- * core needs it.
- *
- * (08/28/2000) gkh
- * Added locks for SMP safeness.
- * Fixed MOD_INC and MOD_DEC logic and the ability to open a port more
- * than once.
- * Fixed potential race in omninet_write_bulk_callback
- *
- * (07/19/2000) gkh
- * Added module_init and module_exit functions to handle the fact that this
- * driver is a loadable module now.
- *
*/
#include <linux/kernel.h>
@@ -44,7 +19,6 @@
#include <linux/tty_driver.h>
#include <linux/tty_flip.h>
#include <linux/module.h>
-#include <linux/spinlock.h>
#include <linux/uaccess.h>
#include <linux/usb.h>
#include <linux/usb/serial.h>
@@ -174,12 +148,6 @@
tty_port_tty_set(&wport->port, tty);
/* Start reading from the device */
- usb_fill_bulk_urb(port->read_urb, serial->dev,
- usb_rcvbulkpipe(serial->dev,
- port->bulk_in_endpointAddress),
- port->read_urb->transfer_buffer,
- port->read_urb->transfer_buffer_length,
- omninet_read_bulk_callback, port);
result = usb_submit_urb(port->read_urb, GFP_KERNEL);
if (result)
dev_err(&port->dev,
@@ -236,11 +204,6 @@
}
/* Continue trying to always read */
- usb_fill_bulk_urb(urb, port->serial->dev,
- usb_rcvbulkpipe(port->serial->dev,
- port->bulk_in_endpointAddress),
- urb->transfer_buffer, urb->transfer_buffer_length,
- omninet_read_bulk_callback, port);
result = usb_submit_urb(urb, GFP_ATOMIC);
if (result)
dev_err(&port->dev,
@@ -267,14 +230,10 @@
return 0;
}
- spin_lock_bh(&wport->lock);
- if (wport->write_urb_busy) {
- spin_unlock_bh(&wport->lock);
+ if (!test_and_clear_bit(0, &port->write_urbs_free)) {
dbg("%s - already writing", __func__);
return 0;
}
- wport->write_urb_busy = 1;
- spin_unlock_bh(&wport->lock);
count = (count > OMNINET_BULKOUTSIZE) ? OMNINET_BULKOUTSIZE : count;
@@ -292,10 +251,9 @@
/* send the data out the bulk port, always 64 bytes */
wport->write_urb->transfer_buffer_length = 64;
- wport->write_urb->dev = serial->dev;
result = usb_submit_urb(wport->write_urb, GFP_ATOMIC);
if (result) {
- wport->write_urb_busy = 0;
+ set_bit(0, &wport->write_urbs_free);
dev_err(&port->dev,
"%s - failed submitting write urb, error %d\n",
__func__, result);
@@ -314,8 +272,7 @@
int room = 0; /* Default: no room */
- /* FIXME: no consistent locking for write_urb_busy */
- if (wport->write_urb_busy)
+ if (test_bit(0, &wport->write_urbs_free))
room = wport->bulk_out_size - OMNINET_HEADERLEN;
dbg("%s - returns %d", __func__, room);
@@ -332,7 +289,7 @@
dbg("%s - port %0x", __func__, port->number);
- port->write_urb_busy = 0;
+ set_bit(0, &port->write_urbs_free);
if (status) {
dbg("%s - nonzero write bulk status received: %d",
__func__, status);
diff --git a/drivers/usb/serial/opticon.c b/drivers/usb/serial/opticon.c
index c248a91..691f57a 100644
--- a/drivers/usb/serial/opticon.c
+++ b/drivers/usb/serial/opticon.c
@@ -384,7 +384,6 @@
priv->actually_throttled = false;
spin_unlock_irqrestore(&priv->lock, flags);
- priv->bulk_read_urb->dev = port->serial->dev;
if (was_throttled) {
result = usb_submit_urb(priv->bulk_read_urb, GFP_ATOMIC);
if (result)
diff --git a/drivers/usb/serial/oti6858.c b/drivers/usb/serial/oti6858.c
index 4c29e6c..2161d1c 100644
--- a/drivers/usb/serial/oti6858.c
+++ b/drivers/usb/serial/oti6858.c
@@ -264,7 +264,6 @@
spin_unlock_irqrestore(&priv->lock, flags);
dbg("%s(): submitting interrupt urb", __func__);
- port->interrupt_in_urb->dev = port->serial->dev;
result = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
if (result != 0) {
dev_err(&port->dev, "%s(): usb_submit_urb() failed"
@@ -321,7 +320,6 @@
priv->flags.write_urb_in_use = 0;
dbg("%s(): submitting interrupt urb", __func__);
- port->interrupt_in_urb->dev = port->serial->dev;
result = usb_submit_urb(port->interrupt_in_urb, GFP_NOIO);
if (result != 0) {
dev_err(&port->dev, "%s(): usb_submit_urb() failed"
@@ -334,7 +332,6 @@
port->write_urb->transfer_buffer,
count, &port->lock);
port->write_urb->transfer_buffer_length = count;
- port->write_urb->dev = port->serial->dev;
result = usb_submit_urb(port->write_urb, GFP_NOIO);
if (result != 0) {
dev_err(&port->dev, "%s(): usb_submit_urb() failed"
@@ -583,13 +580,12 @@
kfree(buf);
dbg("%s(): submitting interrupt urb", __func__);
- port->interrupt_in_urb->dev = serial->dev;
result = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
if (result != 0) {
dev_err(&port->dev, "%s(): usb_submit_urb() failed"
" with error %d\n", __func__, result);
oti6858_close(port);
- return -EPROTO;
+ return result;
}
/* setup termios */
@@ -837,7 +833,6 @@
if (can_recv) {
int result;
- port->read_urb->dev = port->serial->dev;
result = usb_submit_urb(port->read_urb, GFP_ATOMIC);
if (result != 0) {
priv->flags.read_urb_in_use = 0;
@@ -866,7 +861,6 @@
int result;
/* dbg("%s(): submitting interrupt urb", __func__); */
- urb->dev = port->serial->dev;
result = usb_submit_urb(urb, GFP_ATOMIC);
if (result != 0) {
dev_err(&urb->dev->dev,
@@ -894,18 +888,6 @@
spin_unlock_irqrestore(&priv->lock, flags);
if (status != 0) {
- /*
- if (status == -EPROTO) {
- * PL2303 mysteriously fails with -EPROTO reschedule
- the read *
- dbg("%s - caught -EPROTO, resubmitting the urb",
- __func__);
- result = usb_submit_urb(urb, GFP_ATOMIC);
- if (result)
- dev_err(&urb->dev->dev, "%s - failed resubmitting read urb, error %d\n", __func__, result);
- return;
- }
- */
dbg("%s(): unable to handle the error, exiting", __func__);
return;
}
@@ -918,7 +900,6 @@
tty_kref_put(tty);
/* schedule the interrupt urb */
- port->interrupt_in_urb->dev = port->serial->dev;
result = usb_submit_urb(port->interrupt_in_urb, GFP_ATOMIC);
if (result != 0 && result != -EPERM) {
dev_err(&port->dev, "%s(): usb_submit_urb() failed,"
@@ -955,7 +936,6 @@
dbg("%s(): overflow in write", __func__);
port->write_urb->transfer_buffer_length = 1;
- port->write_urb->dev = port->serial->dev;
result = usb_submit_urb(port->write_urb, GFP_ATOMIC);
if (result) {
dev_err(&port->dev, "%s(): usb_submit_urb() failed,"
@@ -968,7 +948,6 @@
priv->flags.write_urb_in_use = 0;
/* schedule the interrupt urb if we are still open */
- port->interrupt_in_urb->dev = port->serial->dev;
dbg("%s(): submitting interrupt urb", __func__);
result = usb_submit_urb(port->interrupt_in_urb, GFP_ATOMIC);
if (result != 0) {
diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c
index fc2d66f..3292956 100644
--- a/drivers/usb/serial/pl2303.c
+++ b/drivers/usb/serial/pl2303.c
@@ -502,21 +502,20 @@
if (tty)
pl2303_set_termios(tty, port, &tmp_termios);
- dbg("%s - submitting read urb", __func__);
- result = usb_serial_generic_submit_read_urb(port, GFP_KERNEL);
- if (result) {
- pl2303_close(port);
- return -EPROTO;
- }
-
dbg("%s - submitting interrupt urb", __func__);
result = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
if (result) {
dev_err(&port->dev, "%s - failed submitting interrupt urb,"
" error %d\n", __func__, result);
- pl2303_close(port);
- return -EPROTO;
+ return result;
}
+
+ result = usb_serial_generic_open(tty, port);
+ if (result) {
+ usb_kill_urb(port->interrupt_in_urb);
+ return result;
+ }
+
port->port.drain_delay = 256;
return 0;
}
diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c
index b18179b..f248542 100644
--- a/drivers/usb/serial/sierra.c
+++ b/drivers/usb/serial/sierra.c
@@ -681,7 +681,6 @@
/* Resubmit urb so we continue receiving IRQ data */
if (status != -ESHUTDOWN && status != -ENOENT) {
usb_mark_last_busy(serial->dev);
- urb->dev = serial->dev;
err = usb_submit_urb(urb, GFP_ATOMIC);
if (err && err != -EPERM)
dev_err(&port->dev, "%s: resubmit intr urb "
diff --git a/drivers/usb/serial/symbolserial.c b/drivers/usb/serial/symbolserial.c
index 7096f79..c70cc01 100644
--- a/drivers/usb/serial/symbolserial.c
+++ b/drivers/usb/serial/symbolserial.c
@@ -182,7 +182,6 @@
priv->actually_throttled = false;
spin_unlock_irq(&priv->lock);
- priv->int_urb->dev = port->serial->dev;
if (was_throttled) {
result = usb_submit_urb(priv->int_urb, GFP_KERNEL);
if (result)
diff --git a/drivers/usb/serial/ti_usb_3410_5052.c b/drivers/usb/serial/ti_usb_3410_5052.c
index ea84456..4af21f4 100644
--- a/drivers/usb/serial/ti_usb_3410_5052.c
+++ b/drivers/usb/serial/ti_usb_3410_5052.c
@@ -535,9 +535,7 @@
status = -EINVAL;
goto release_lock;
}
- urb->complete = ti_interrupt_callback;
urb->context = tdev;
- urb->dev = dev;
status = usb_submit_urb(urb, GFP_KERNEL);
if (status) {
dev_err(&port->dev,
@@ -619,9 +617,7 @@
goto unlink_int_urb;
}
tport->tp_read_urb_state = TI_READ_URB_RUNNING;
- urb->complete = ti_bulk_in_callback;
urb->context = tport;
- urb->dev = dev;
status = usb_submit_urb(urb, GFP_KERNEL);
if (status) {
dev_err(&port->dev, "%s - submit read urb failed, %d\n",
@@ -1236,12 +1232,11 @@
exit:
/* continue to read unless stopping */
spin_lock(&tport->tp_lock);
- if (tport->tp_read_urb_state == TI_READ_URB_RUNNING) {
- urb->dev = port->serial->dev;
+ if (tport->tp_read_urb_state == TI_READ_URB_RUNNING)
retval = usb_submit_urb(urb, GFP_ATOMIC);
- } else if (tport->tp_read_urb_state == TI_READ_URB_STOPPING) {
+ else if (tport->tp_read_urb_state == TI_READ_URB_STOPPING)
tport->tp_read_urb_state = TI_READ_URB_STOPPED;
- }
+
spin_unlock(&tport->tp_lock);
if (retval)
dev_err(dev, "%s - resubmit read urb failed, %d\n",
@@ -1574,9 +1569,7 @@
tport->tp_read_urb_state = TI_READ_URB_RUNNING;
urb = tport->tp_port->read_urb;
spin_unlock_irqrestore(&tport->tp_lock, flags);
- urb->complete = ti_bulk_in_callback;
urb->context = tport;
- urb->dev = tport->tp_port->serial->dev;
status = usb_submit_urb(urb, GFP_KERNEL);
} else {
tport->tp_read_urb_state = TI_READ_URB_RUNNING;
diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c
index cc274fd..ce6c1a6 100644
--- a/drivers/usb/serial/usb-serial.c
+++ b/drivers/usb/serial/usb-serial.c
@@ -50,7 +50,7 @@
.disconnect = usb_serial_disconnect,
.suspend = usb_serial_suspend,
.resume = usb_serial_resume,
- .no_dynamic_id = 1,
+ .no_dynamic_id = 1,
.supports_autosuspend = 1,
};
@@ -260,6 +260,10 @@
else
retval = port->serial->type->open(tty, port);
mutex_unlock(&serial->disc_mutex);
+
+ if (retval < 0)
+ retval = usb_translate_errors(retval);
+
return retval;
}
@@ -360,7 +364,8 @@
/* pass on to the driver specific version of this function */
retval = port->serial->type->write(tty, port, buf, count);
-
+ if (retval < 0)
+ retval = usb_translate_errors(retval);
exit:
return retval;
}
@@ -562,8 +567,8 @@
{
int i;
- usb_kill_urb(port->read_urb);
- usb_kill_urb(port->write_urb);
+ for (i = 0; i < ARRAY_SIZE(port->read_urbs); ++i)
+ usb_kill_urb(port->read_urbs[i]);
for (i = 0; i < ARRAY_SIZE(port->write_urbs); ++i)
usb_kill_urb(port->write_urbs[i]);
/*
@@ -595,17 +600,17 @@
kill_traffic(port);
cancel_work_sync(&port->work);
- usb_free_urb(port->read_urb);
- usb_free_urb(port->write_urb);
usb_free_urb(port->interrupt_in_urb);
usb_free_urb(port->interrupt_out_urb);
+ for (i = 0; i < ARRAY_SIZE(port->read_urbs); ++i) {
+ usb_free_urb(port->read_urbs[i]);
+ kfree(port->bulk_in_buffers[i]);
+ }
for (i = 0; i < ARRAY_SIZE(port->write_urbs); ++i) {
usb_free_urb(port->write_urbs[i]);
kfree(port->bulk_out_buffers[i]);
}
kfifo_free(&port->write_fifo);
- kfree(port->bulk_in_buffer);
- kfree(port->bulk_out_buffer);
kfree(port->interrupt_in_buffer);
kfree(port->interrupt_out_buffer);
kfree(port);
@@ -686,16 +691,18 @@
{
struct usb_serial_port *p = container_of(port, struct usb_serial_port, port);
struct usb_serial_driver *drv = p->serial->type;
+
if (drv->carrier_raised)
return drv->carrier_raised(p);
/* No carrier control - don't block */
- return 1;
+ return 1;
}
static void serial_dtr_rts(struct tty_port *port, int on)
{
struct usb_serial_port *p = container_of(port, struct usb_serial_port, port);
struct usb_serial_driver *drv = p->serial->type;
+
if (drv->dtr_rts)
drv->dtr_rts(p, on);
}
@@ -724,6 +731,7 @@
unsigned int minor;
int buffer_size;
int i;
+ int j;
int num_interrupt_in = 0;
int num_interrupt_out = 0;
int num_bulk_in = 0;
@@ -906,38 +914,41 @@
for (i = 0; i < num_bulk_in; ++i) {
endpoint = bulk_in_endpoint[i];
port = serial->port[i];
- port->read_urb = usb_alloc_urb(0, GFP_KERNEL);
- if (!port->read_urb) {
- dev_err(&interface->dev, "No free urbs available\n");
- goto probe_error;
- }
buffer_size = max_t(int, serial->type->bulk_in_size,
usb_endpoint_maxp(endpoint));
port->bulk_in_size = buffer_size;
port->bulk_in_endpointAddress = endpoint->bEndpointAddress;
- port->bulk_in_buffer = kmalloc(buffer_size, GFP_KERNEL);
- if (!port->bulk_in_buffer) {
- dev_err(&interface->dev,
+
+ for (j = 0; j < ARRAY_SIZE(port->read_urbs); ++j) {
+ set_bit(j, &port->read_urbs_free);
+ port->read_urbs[j] = usb_alloc_urb(0, GFP_KERNEL);
+ if (!port->read_urbs[j]) {
+ dev_err(&interface->dev,
+ "No free urbs available\n");
+ goto probe_error;
+ }
+ port->bulk_in_buffers[j] = kmalloc(buffer_size,
+ GFP_KERNEL);
+ if (!port->bulk_in_buffers[j]) {
+ dev_err(&interface->dev,
"Couldn't allocate bulk_in_buffer\n");
- goto probe_error;
- }
- usb_fill_bulk_urb(port->read_urb, dev,
- usb_rcvbulkpipe(dev,
+ goto probe_error;
+ }
+ usb_fill_bulk_urb(port->read_urbs[j], dev,
+ usb_rcvbulkpipe(dev,
endpoint->bEndpointAddress),
- port->bulk_in_buffer, buffer_size,
- serial->type->read_bulk_callback, port);
+ port->bulk_in_buffers[j], buffer_size,
+ serial->type->read_bulk_callback,
+ port);
+ }
+
+ port->read_urb = port->read_urbs[0];
+ port->bulk_in_buffer = port->bulk_in_buffers[0];
}
for (i = 0; i < num_bulk_out; ++i) {
- int j;
-
endpoint = bulk_out_endpoint[i];
port = serial->port[i];
- port->write_urb = usb_alloc_urb(0, GFP_KERNEL);
- if (!port->write_urb) {
- dev_err(&interface->dev, "No free urbs available\n");
- goto probe_error;
- }
if (kfifo_alloc(&port->write_fifo, PAGE_SIZE, GFP_KERNEL))
goto probe_error;
buffer_size = serial->type->bulk_out_size;
@@ -945,17 +956,7 @@
buffer_size = usb_endpoint_maxp(endpoint);
port->bulk_out_size = buffer_size;
port->bulk_out_endpointAddress = endpoint->bEndpointAddress;
- port->bulk_out_buffer = kmalloc(buffer_size, GFP_KERNEL);
- if (!port->bulk_out_buffer) {
- dev_err(&interface->dev,
- "Couldn't allocate bulk_out_buffer\n");
- goto probe_error;
- }
- usb_fill_bulk_urb(port->write_urb, dev,
- usb_sndbulkpipe(dev,
- endpoint->bEndpointAddress),
- port->bulk_out_buffer, buffer_size,
- serial->type->write_bulk_callback, port);
+
for (j = 0; j < ARRAY_SIZE(port->write_urbs); ++j) {
set_bit(j, &port->write_urbs_free);
port->write_urbs[j] = usb_alloc_urb(0, GFP_KERNEL);
@@ -978,6 +979,9 @@
serial->type->write_bulk_callback,
port);
}
+
+ port->write_urb = port->write_urbs[0];
+ port->bulk_out_buffer = port->bulk_out_buffers[0];
}
if (serial->type->read_int_callback) {
@@ -1196,7 +1200,7 @@
.open = serial_open,
.close = serial_close,
.write = serial_write,
- .hangup = serial_hangup,
+ .hangup = serial_hangup,
.write_room = serial_write_room,
.ioctl = serial_ioctl,
.set_termios = serial_set_termios,
@@ -1206,9 +1210,9 @@
.chars_in_buffer = serial_chars_in_buffer,
.tiocmget = serial_tiocmget,
.tiocmset = serial_tiocmset,
- .get_icount = serial_get_icount,
- .cleanup = serial_cleanup,
- .install = serial_install,
+ .get_icount = serial_get_icount,
+ .cleanup = serial_cleanup,
+ .install = serial_install,
.proc_fops = &serial_proc_fops,
};
@@ -1237,7 +1241,7 @@
usb_serial_tty_driver->owner = THIS_MODULE;
usb_serial_tty_driver->driver_name = "usbserial";
- usb_serial_tty_driver->name = "ttyUSB";
+ usb_serial_tty_driver->name = "ttyUSB";
usb_serial_tty_driver->major = SERIAL_TTY_MAJOR;
usb_serial_tty_driver->minor_start = 0;
usb_serial_tty_driver->type = TTY_DRIVER_TYPE_SERIAL;
@@ -1336,7 +1340,6 @@
int usb_serial_register(struct usb_serial_driver *driver)
{
- /* must be called with BKL held */
int retval;
if (usb_disabled())
@@ -1374,7 +1377,6 @@
void usb_serial_deregister(struct usb_serial_driver *device)
{
- /* must be called with BKL held */
printk(KERN_INFO "USB Serial deregistering driver %s\n",
device->description);
mutex_lock(&table_lock);
diff --git a/drivers/usb/serial/usb_debug.c b/drivers/usb/serial/usb_debug.c
index 95a8214..9b632e7 100644
--- a/drivers/usb/serial/usb_debug.c
+++ b/drivers/usb/serial/usb_debug.c
@@ -40,7 +40,7 @@
.probe = usb_serial_probe,
.disconnect = usb_serial_disconnect,
.id_table = id_table,
- .no_dynamic_id = 1,
+ .no_dynamic_id = 1,
};
/* This HW really does not support a serial break, so one will be
@@ -54,19 +54,18 @@
usb_serial_generic_write(tty, port, USB_DEBUG_BRK, USB_DEBUG_BRK_SIZE);
}
-static void usb_debug_read_bulk_callback(struct urb *urb)
+static void usb_debug_process_read_urb(struct urb *urb)
{
struct usb_serial_port *port = urb->context;
if (urb->actual_length == USB_DEBUG_BRK_SIZE &&
- memcmp(urb->transfer_buffer, USB_DEBUG_BRK,
- USB_DEBUG_BRK_SIZE) == 0) {
+ memcmp(urb->transfer_buffer, USB_DEBUG_BRK,
+ USB_DEBUG_BRK_SIZE) == 0) {
usb_serial_handle_break(port);
- usb_serial_generic_submit_read_urb(port, GFP_ATOMIC);
return;
}
- usb_serial_generic_read_bulk_callback(urb);
+ usb_serial_generic_process_read_urb(urb);
}
static struct usb_serial_driver debug_device = {
@@ -79,7 +78,7 @@
.num_ports = 1,
.bulk_out_size = USB_DEBUG_MAX_PACKET_SIZE,
.break_ctl = usb_debug_break_ctl,
- .read_bulk_callback = usb_debug_read_bulk_callback,
+ .process_read_urb = usb_debug_process_read_urb,
};
static int __init debug_init(void)
diff --git a/drivers/usb/serial/whiteheat.c b/drivers/usb/serial/whiteheat.c
index 5b073bc..11af903 100644
--- a/drivers/usb/serial/whiteheat.c
+++ b/drivers/usb/serial/whiteheat.c
@@ -14,57 +14,6 @@
*
* See Documentation/usb/usb-serial.txt for more information on using this
* driver
- *
- * (10/09/2002) Stuart MacDonald (stuartm@connecttech.com)
- * Upgrade to full working driver
- *
- * (05/30/2001) gkh
- * switched from using spinlock to a semaphore, which fixes lots of
- * problems.
- *
- * (04/08/2001) gb
- * Identify version on module load.
- *
- * 2001_Mar_19 gkh
- * Fixed MOD_INC and MOD_DEC logic, the ability to open a port more
- * than once, and the got the proper usb_device_id table entries so
- * the driver works again.
- *
- * (11/01/2000) Adam J. Richter
- * usb_device_id table support
- *
- * (10/05/2000) gkh
- * Fixed bug with urb->dev not being set properly, now that the usb
- * core needs it.
- *
- * (10/03/2000) smd
- * firmware is improved to guard against crap sent to device
- * firmware now replies CMD_FAILURE on bad things
- * read_callback fix you provided for private info struct
- * command_finished now indicates success or fail
- * setup_port struct now packed to avoid gcc padding
- * firmware uses 1 based port numbering, driver now handles that
- *
- * (09/11/2000) gkh
- * Removed DEBUG #ifdefs with call to usb_serial_debug_data
- *
- * (07/19/2000) gkh
- * Added module_init and module_exit functions to handle the fact that this
- * driver is a loadable module now.
- * Fixed bug with port->minor that was found by Al Borchers
- *
- * (07/04/2000) gkh
- * Added support for port settings. Baud rate can now be changed. Line
- * signals are not transferred to and from the tty layer yet, but things
- * seem to be working well now.
- *
- * (05/04/2000) gkh
- * First cut at open and close commands. Data can flow through the ports at
- * default speeds now.
- *
- * (03/26/2000) gkh
- * Split driver up into device specific pieces.
- *
*/
#include <linux/kernel.h>
@@ -753,7 +702,6 @@
static int whiteheat_write(struct tty_struct *tty,
struct usb_serial_port *port, const unsigned char *buf, int count)
{
- struct usb_serial *serial = port->serial;
struct whiteheat_private *info = usb_get_serial_port_data(port);
struct whiteheat_urb_wrap *wrap;
struct urb *urb;
@@ -789,7 +737,6 @@
usb_serial_debug_data(debug, &port->dev,
__func__, bytes, urb->transfer_buffer);
- urb->dev = serial->dev;
urb->transfer_buffer_length = bytes;
result = usb_submit_urb(urb, GFP_ATOMIC);
if (result) {
@@ -1035,7 +982,6 @@
dbg("%s - bad reply from firmware", __func__);
/* Continue trying to always read */
- command_port->read_urb->dev = command_port->serial->dev;
result = usb_submit_urb(command_port->read_urb, GFP_ATOMIC);
if (result)
dbg("%s - failed resubmitting read urb, error %d",
@@ -1141,7 +1087,6 @@
transfer_buffer[0] = command;
memcpy(&transfer_buffer[1], data, datasize);
command_port->write_urb->transfer_buffer_length = datasize + 1;
- command_port->write_urb->dev = port->serial->dev;
retval = usb_submit_urb(command_port->write_urb, GFP_NOIO);
if (retval) {
dbg("%s - submit urb failed", __func__);
@@ -1362,7 +1307,6 @@
/* Work around HCD bugs */
usb_clear_halt(serial->dev, command_port->read_urb->pipe);
- command_port->read_urb->dev = serial->dev;
retval = usb_submit_urb(command_port->read_urb, GFP_KERNEL);
if (retval) {
dev_err(&serial->dev->dev,
@@ -1410,7 +1354,6 @@
list_del(tmp);
wrap = list_entry(tmp, struct whiteheat_urb_wrap, list);
urb = wrap->urb;
- urb->dev = port->serial->dev;
spin_unlock_irqrestore(&info->lock, flags);
retval = usb_submit_urb(urb, GFP_KERNEL);
if (retval) {
@@ -1490,7 +1433,6 @@
sent += tty_insert_flip_string(tty,
urb->transfer_buffer, urb->actual_length);
- urb->dev = port->serial->dev;
result = usb_submit_urb(urb, GFP_ATOMIC);
if (result) {
dev_err(&port->dev,
diff --git a/drivers/usb/storage/alauda.c b/drivers/usb/storage/alauda.c
index 42d0eae..9ce3bba 100644
--- a/drivers/usb/storage/alauda.c
+++ b/drivers/usb/storage/alauda.c
@@ -139,7 +139,7 @@
{ USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax), \
.driver_info = (flags)|(USB_US_TYPE_STOR<<24) }
-struct usb_device_id alauda_usb_ids[] = {
+static struct usb_device_id alauda_usb_ids[] = {
# include "unusual_alauda.h"
{ } /* Terminating entry */
};
diff --git a/drivers/usb/storage/cypress_atacb.c b/drivers/usb/storage/cypress_atacb.c
index c844718..740bfe6 100644
--- a/drivers/usb/storage/cypress_atacb.c
+++ b/drivers/usb/storage/cypress_atacb.c
@@ -43,7 +43,7 @@
{ USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax), \
.driver_info = (flags)|(USB_US_TYPE_STOR<<24) }
-struct usb_device_id cypress_usb_ids[] = {
+static struct usb_device_id cypress_usb_ids[] = {
# include "unusual_cypress.h"
{ } /* Terminating entry */
};
diff --git a/drivers/usb/storage/datafab.c b/drivers/usb/storage/datafab.c
index ded836b..0d8d97c 100644
--- a/drivers/usb/storage/datafab.c
+++ b/drivers/usb/storage/datafab.c
@@ -88,7 +88,7 @@
{ USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax), \
.driver_info = (flags)|(USB_US_TYPE_STOR<<24) }
-struct usb_device_id datafab_usb_ids[] = {
+static struct usb_device_id datafab_usb_ids[] = {
# include "unusual_datafab.h"
{ } /* Terminating entry */
};
diff --git a/drivers/usb/storage/ene_ub6250.c b/drivers/usb/storage/ene_ub6250.c
index 9fbe742..b990726 100644
--- a/drivers/usb/storage/ene_ub6250.c
+++ b/drivers/usb/storage/ene_ub6250.c
@@ -42,7 +42,7 @@
{ USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax), \
.driver_info = (flags)|(USB_US_TYPE_STOR<<24) }
-struct usb_device_id ene_ub6250_usb_ids[] = {
+static struct usb_device_id ene_ub6250_usb_ids[] = {
# include "unusual_ene_ub6250.h"
{ } /* Terminating entry */
};
@@ -607,8 +607,8 @@
static int sd_scsi_read_capacity(struct us_data *us, struct scsi_cmnd *srb)
{
- u32 bl_num;
- u16 bl_len;
+ u32 bl_num;
+ u32 bl_len;
unsigned int offset = 0;
unsigned char buf[8];
struct scatterlist *sg = NULL;
@@ -622,7 +622,7 @@
else
bl_num = (info->HC_C_SIZE + 1) * 1024 - 1;
} else {
- bl_len = 1<<(info->SD_READ_BL_LEN);
+ bl_len = 1 << (info->SD_READ_BL_LEN);
bl_num = info->SD_Block_Mult * (info->SD_C_SIZE + 1)
* (1 << (info->SD_C_SIZE_MULT + 2)) - 1;
}
@@ -777,7 +777,7 @@
return 0;
}
-int ms_lib_alloc_logicalmap(struct us_data *us)
+static int ms_lib_alloc_logicalmap(struct us_data *us)
{
u32 i;
struct ene_ub6250_info *info = (struct ene_ub6250_info *) us->extra;
@@ -2248,7 +2248,7 @@
/*
* ms_scsi_irp()
*/
-int ms_scsi_irp(struct us_data *us, struct scsi_cmnd *srb)
+static int ms_scsi_irp(struct us_data *us, struct scsi_cmnd *srb)
{
int result;
struct ene_ub6250_info *info = (struct ene_ub6250_info *)us->extra;
diff --git a/drivers/usb/storage/freecom.c b/drivers/usb/storage/freecom.c
index 6542ca4..8cf16f8 100644
--- a/drivers/usb/storage/freecom.c
+++ b/drivers/usb/storage/freecom.c
@@ -119,7 +119,7 @@
{ USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax), \
.driver_info = (flags)|(USB_US_TYPE_STOR<<24) }
-struct usb_device_id freecom_usb_ids[] = {
+static struct usb_device_id freecom_usb_ids[] = {
# include "unusual_freecom.h"
{ } /* Terminating entry */
};
diff --git a/drivers/usb/storage/isd200.c b/drivers/usb/storage/isd200.c
index ffc4193..7b81303 100644
--- a/drivers/usb/storage/isd200.c
+++ b/drivers/usb/storage/isd200.c
@@ -76,7 +76,7 @@
{ USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax), \
.driver_info = (flags)|(USB_US_TYPE_STOR<<24) }
-struct usb_device_id isd200_usb_ids[] = {
+static struct usb_device_id isd200_usb_ids[] = {
# include "unusual_isd200.h"
{ } /* Terminating entry */
};
diff --git a/drivers/usb/storage/jumpshot.c b/drivers/usb/storage/jumpshot.c
index 6168596..5ef55c7 100644
--- a/drivers/usb/storage/jumpshot.c
+++ b/drivers/usb/storage/jumpshot.c
@@ -71,7 +71,7 @@
{ USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax), \
.driver_info = (flags)|(USB_US_TYPE_STOR<<24) }
-struct usb_device_id jumpshot_usb_ids[] = {
+static struct usb_device_id jumpshot_usb_ids[] = {
# include "unusual_jumpshot.h"
{ } /* Terminating entry */
};
diff --git a/drivers/usb/storage/karma.c b/drivers/usb/storage/karma.c
index ba1b789..fb5bfb0 100644
--- a/drivers/usb/storage/karma.c
+++ b/drivers/usb/storage/karma.c
@@ -59,7 +59,7 @@
{ USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax), \
.driver_info = (flags)|(USB_US_TYPE_STOR<<24) }
-struct usb_device_id karma_usb_ids[] = {
+static struct usb_device_id karma_usb_ids[] = {
# include "unusual_karma.h"
{ } /* Terminating entry */
};
diff --git a/drivers/usb/storage/onetouch.c b/drivers/usb/storage/onetouch.c
index 1943be5..d29be3e 100644
--- a/drivers/usb/storage/onetouch.c
+++ b/drivers/usb/storage/onetouch.c
@@ -69,7 +69,7 @@
{ USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax), \
.driver_info = (flags)|(USB_US_TYPE_STOR<<24) }
-struct usb_device_id onetouch_usb_ids[] = {
+static struct usb_device_id onetouch_usb_ids[] = {
# include "unusual_onetouch.h"
{ } /* Terminating entry */
};
diff --git a/drivers/usb/storage/realtek_cr.c b/drivers/usb/storage/realtek_cr.c
index 0ce5f79..7114767 100644
--- a/drivers/usb/storage/realtek_cr.c
+++ b/drivers/usb/storage/realtek_cr.c
@@ -398,10 +398,9 @@
u8 cmnd[12] = { 0 };
u8 *buf;
- buf = kmalloc(len, GFP_NOIO);
+ buf = kmemdup(data, len, GFP_NOIO);
if (buf == NULL)
return USB_STOR_TRANSPORT_ERROR;
- memcpy(buf, data, len);
US_DEBUGP("%s, addr = 0x%x, len = %d\n", __func__, addr, len);
@@ -507,15 +506,14 @@
static int __do_config_autodelink(struct us_data *us, u8 *data, u16 len)
{
int retval;
- u16 addr = 0xFE47;
u8 cmnd[12] = {0};
- US_DEBUGP("%s, addr = 0x%x, len = %d\n", __FUNCTION__, addr, len);
+ US_DEBUGP("%s, addr = 0xfe47, len = %d\n", __FUNCTION__, len);
cmnd[0] = 0xF0;
cmnd[1] = 0x0E;
- cmnd[2] = (u8)(addr >> 8);
- cmnd[3] = (u8)addr;
+ cmnd[2] = 0xfe;
+ cmnd[3] = 0x47;
cmnd[4] = (u8)(len >> 8);
cmnd[5] = (u8)len;
@@ -818,7 +816,7 @@
return 1;
}
-void rts51x_invoke_transport(struct scsi_cmnd *srb, struct us_data *us)
+static void rts51x_invoke_transport(struct scsi_cmnd *srb, struct us_data *us)
{
struct rts51x_chip *chip = (struct rts51x_chip *)(us->extra);
static int card_first_show = 1;
@@ -977,7 +975,7 @@
}
#ifdef CONFIG_PM
-int realtek_cr_suspend(struct usb_interface *iface, pm_message_t message)
+static int realtek_cr_suspend(struct usb_interface *iface, pm_message_t message)
{
struct us_data *us = usb_get_intfdata(iface);
diff --git a/drivers/usb/storage/sddr09.c b/drivers/usb/storage/sddr09.c
index bcb9a70..6ecbf44 100644
--- a/drivers/usb/storage/sddr09.c
+++ b/drivers/usb/storage/sddr09.c
@@ -71,7 +71,7 @@
{ USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax), \
.driver_info = (flags)|(USB_US_TYPE_STOR<<24) }
-struct usb_device_id sddr09_usb_ids[] = {
+static struct usb_device_id sddr09_usb_ids[] = {
# include "unusual_sddr09.h"
{ } /* Terminating entry */
};
diff --git a/drivers/usb/storage/sddr55.c b/drivers/usb/storage/sddr55.c
index 44dfed7..f293044 100644
--- a/drivers/usb/storage/sddr55.c
+++ b/drivers/usb/storage/sddr55.c
@@ -48,7 +48,7 @@
{ USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax), \
.driver_info = (flags)|(USB_US_TYPE_STOR<<24) }
-struct usb_device_id sddr55_usb_ids[] = {
+static struct usb_device_id sddr55_usb_ids[] = {
# include "unusual_sddr55.h"
{ } /* Terminating entry */
};
diff --git a/drivers/usb/storage/shuttle_usbat.c b/drivers/usb/storage/shuttle_usbat.c
index 0b00091..7d642c8 100644
--- a/drivers/usb/storage/shuttle_usbat.c
+++ b/drivers/usb/storage/shuttle_usbat.c
@@ -170,7 +170,7 @@
{ USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax), \
.driver_info = (flags)|(USB_US_TYPE_STOR<<24) }
-struct usb_device_id usbat_usb_ids[] = {
+static struct usb_device_id usbat_usb_ids[] = {
# include "unusual_usbat.h"
{ } /* Terminating entry */
};
diff --git a/drivers/usb/wusbcore/security.c b/drivers/usb/wusbcore/security.c
index 371f617..fa810a8 100644
--- a/drivers/usb/wusbcore/security.c
+++ b/drivers/usb/wusbcore/security.c
@@ -354,7 +354,7 @@
struct wusb_keydvt_in keydvt_in;
struct wusb_keydvt_out keydvt_out;
- hs = kzalloc(3*sizeof(hs[0]), GFP_KERNEL);
+ hs = kcalloc(3, sizeof(hs[0]), GFP_KERNEL);
if (hs == NULL) {
dev_err(dev, "can't allocate handshake data\n");
goto error_kzalloc;
diff --git a/drivers/uwb/est.c b/drivers/uwb/est.c
index de81ebf..86ed7e6 100644
--- a/drivers/uwb/est.c
+++ b/drivers/uwb/est.c
@@ -184,7 +184,7 @@
uwb_est_size = 2;
uwb_est_used = 0;
- uwb_est = kzalloc(uwb_est_size * sizeof(uwb_est[0]), GFP_KERNEL);
+ uwb_est = kcalloc(uwb_est_size, sizeof(uwb_est[0]), GFP_KERNEL);
if (uwb_est == NULL)
return -ENOMEM;
diff --git a/fs/fat/namei_vfat.c b/fs/fat/namei_vfat.c
index a87a656..c25cf15 100644
--- a/fs/fat/namei_vfat.c
+++ b/fs/fat/namei_vfat.c
@@ -512,7 +512,8 @@
int charlen;
if (utf8) {
- *outlen = utf8s_to_utf16s(name, len, (wchar_t *)outname);
+ *outlen = utf8s_to_utf16s(name, len, UTF16_HOST_ENDIAN,
+ (wchar_t *) outname, FAT_LFN_LEN + 2);
if (*outlen < 0)
return *outlen;
else if (*outlen > FAT_LFN_LEN)
diff --git a/fs/nls/nls_base.c b/fs/nls/nls_base.c
index 44a88a9..fea6bd5 100644
--- a/fs/nls/nls_base.c
+++ b/fs/nls/nls_base.c
@@ -52,7 +52,7 @@
#define SURROGATE_LOW 0x00000400
#define SURROGATE_BITS 0x000003ff
-int utf8_to_utf32(const u8 *s, int len, unicode_t *pu)
+int utf8_to_utf32(const u8 *s, int inlen, unicode_t *pu)
{
unsigned long l;
int c0, c, nc;
@@ -71,7 +71,7 @@
*pu = (unicode_t) l;
return nc;
}
- if (len <= nc)
+ if (inlen <= nc)
return -1;
s++;
c = (*s ^ 0x80) & 0xFF;
@@ -83,7 +83,7 @@
}
EXPORT_SYMBOL(utf8_to_utf32);
-int utf32_to_utf8(unicode_t u, u8 *s, int maxlen)
+int utf32_to_utf8(unicode_t u, u8 *s, int maxout)
{
unsigned long l;
int c, nc;
@@ -97,7 +97,7 @@
return -1;
nc = 0;
- for (t = utf8_table; t->cmask && maxlen; t++, maxlen--) {
+ for (t = utf8_table; t->cmask && maxout; t++, maxout--) {
nc++;
if (l <= t->lmask) {
c = t->shift;
@@ -114,34 +114,57 @@
}
EXPORT_SYMBOL(utf32_to_utf8);
-int utf8s_to_utf16s(const u8 *s, int len, wchar_t *pwcs)
+static inline void put_utf16(wchar_t *s, unsigned c, enum utf16_endian endian)
+{
+ switch (endian) {
+ default:
+ *s = (wchar_t) c;
+ break;
+ case UTF16_LITTLE_ENDIAN:
+ *s = __cpu_to_le16(c);
+ break;
+ case UTF16_BIG_ENDIAN:
+ *s = __cpu_to_be16(c);
+ break;
+ }
+}
+
+int utf8s_to_utf16s(const u8 *s, int inlen, enum utf16_endian endian,
+ wchar_t *pwcs, int maxout)
{
u16 *op;
int size;
unicode_t u;
op = pwcs;
- while (*s && len > 0) {
+ while (inlen > 0 && maxout > 0 && *s) {
if (*s & 0x80) {
- size = utf8_to_utf32(s, len, &u);
+ size = utf8_to_utf32(s, inlen, &u);
if (size < 0)
return -EINVAL;
+ s += size;
+ inlen -= size;
if (u >= PLANE_SIZE) {
+ if (maxout < 2)
+ break;
u -= PLANE_SIZE;
- *op++ = (wchar_t) (SURROGATE_PAIR |
- ((u >> 10) & SURROGATE_BITS));
- *op++ = (wchar_t) (SURROGATE_PAIR |
+ put_utf16(op++, SURROGATE_PAIR |
+ ((u >> 10) & SURROGATE_BITS),
+ endian);
+ put_utf16(op++, SURROGATE_PAIR |
SURROGATE_LOW |
- (u & SURROGATE_BITS));
+ (u & SURROGATE_BITS),
+ endian);
+ maxout -= 2;
} else {
- *op++ = (wchar_t) u;
+ put_utf16(op++, u, endian);
+ maxout--;
}
- s += size;
- len -= size;
} else {
- *op++ = *s++;
- len--;
+ put_utf16(op++, *s++, endian);
+ inlen--;
+ maxout--;
}
}
return op - pwcs;
@@ -160,27 +183,27 @@
}
}
-int utf16s_to_utf8s(const wchar_t *pwcs, int len, enum utf16_endian endian,
- u8 *s, int maxlen)
+int utf16s_to_utf8s(const wchar_t *pwcs, int inlen, enum utf16_endian endian,
+ u8 *s, int maxout)
{
u8 *op;
int size;
unsigned long u, v;
op = s;
- while (len > 0 && maxlen > 0) {
+ while (inlen > 0 && maxout > 0) {
u = get_utf16(*pwcs, endian);
if (!u)
break;
pwcs++;
- len--;
+ inlen--;
if (u > 0x7f) {
if ((u & SURROGATE_MASK) == SURROGATE_PAIR) {
if (u & SURROGATE_LOW) {
/* Ignore character and move on */
continue;
}
- if (len <= 0)
+ if (inlen <= 0)
break;
v = get_utf16(*pwcs, endian);
if ((v & SURROGATE_MASK) != SURROGATE_PAIR ||
@@ -191,18 +214,18 @@
u = PLANE_SIZE + ((u & SURROGATE_BITS) << 10)
+ (v & SURROGATE_BITS);
pwcs++;
- len--;
+ inlen--;
}
- size = utf32_to_utf8(u, op, maxlen);
+ size = utf32_to_utf8(u, op, maxout);
if (size == -1) {
/* Ignore character and move on */
} else {
op += size;
- maxlen -= size;
+ maxout -= size;
}
} else {
*op++ = (u8) u;
- maxlen--;
+ maxout--;
}
}
return op - s;
diff --git a/include/linux/nls.h b/include/linux/nls.h
index d47beef..5dc635f 100644
--- a/include/linux/nls.h
+++ b/include/linux/nls.h
@@ -43,7 +43,7 @@
UTF16_BIG_ENDIAN
};
-/* nls.c */
+/* nls_base.c */
extern int register_nls(struct nls_table *);
extern int unregister_nls(struct nls_table *);
extern struct nls_table *load_nls(char *);
@@ -52,7 +52,8 @@
extern int utf8_to_utf32(const u8 *s, int len, unicode_t *pu);
extern int utf32_to_utf8(unicode_t u, u8 *s, int maxlen);
-extern int utf8s_to_utf16s(const u8 *s, int len, wchar_t *pwcs);
+extern int utf8s_to_utf16s(const u8 *s, int len,
+ enum utf16_endian endian, wchar_t *pwcs, int maxlen);
extern int utf16s_to_utf8s(const wchar_t *pwcs, int len,
enum utf16_endian endian, u8 *s, int maxlen);
diff --git a/include/linux/usb.h b/include/linux/usb.h
index d3d0c13..4269c3f 100644
--- a/include/linux/usb.h
+++ b/include/linux/usb.h
@@ -1221,6 +1221,7 @@
void *transfer_buffer; /* (in) associated data buffer */
dma_addr_t transfer_dma; /* (in) dma addr for transfer_buffer */
struct scatterlist *sg; /* (in) scatter gather buffer list */
+ int num_mapped_sgs; /* (internal) mapped sg entries */
int num_sgs; /* (in) number of entries in the sg list */
u32 transfer_buffer_length; /* (in) data buffer length */
u32 actual_length; /* (return) actual transfer length */
@@ -1598,6 +1599,19 @@
/* ----------------------------------------------------------------------- */
+/* translate USB error codes to codes user space understands */
+static inline int usb_translate_errors(int error_code)
+{
+ switch (error_code) {
+ case 0:
+ case -ENOMEM:
+ case -ENODEV:
+ return error_code;
+ default:
+ return -EIO;
+ }
+}
+
/* Events from the usb core */
#define USB_DEVICE_ADD 0x0001
#define USB_DEVICE_REMOVE 0x0002
diff --git a/include/linux/usb/ch11.h b/include/linux/usb/ch11.h
index 4ebaf08..31fdb4c 100644
--- a/include/linux/usb/ch11.h
+++ b/include/linux/usb/ch11.h
@@ -26,7 +26,6 @@
#define HUB_RESET_TT 9
#define HUB_GET_TT_STATE 10
#define HUB_STOP_TT 11
-#define HUB_SET_DEPTH 12
/*
* Hub class additional requests defined by USB 3.0 spec
@@ -165,11 +164,20 @@
* wHubCharacteristics (masks)
* See USB 2.0 spec Table 11-13, offset 3
*/
-#define HUB_CHAR_LPSM 0x0003 /* D1 .. D0 */
-#define HUB_CHAR_COMPOUND 0x0004 /* D2 */
-#define HUB_CHAR_OCPM 0x0018 /* D4 .. D3 */
-#define HUB_CHAR_TTTT 0x0060 /* D6 .. D5 */
-#define HUB_CHAR_PORTIND 0x0080 /* D7 */
+#define HUB_CHAR_LPSM 0x0003 /* Logical Power Switching Mode mask */
+#define HUB_CHAR_COMMON_LPSM 0x0000 /* All ports power control at once */
+#define HUB_CHAR_INDV_PORT_LPSM 0x0001 /* per-port power control */
+#define HUB_CHAR_NO_LPSM 0x0002 /* no power switching */
+
+#define HUB_CHAR_COMPOUND 0x0004 /* hub is part of a compound device */
+
+#define HUB_CHAR_OCPM 0x0018 /* Over-Current Protection Mode mask */
+#define HUB_CHAR_COMMON_OCPM 0x0000 /* All ports Over-Current reporting */
+#define HUB_CHAR_INDV_PORT_OCPM 0x0008 /* per-port Over-current reporting */
+#define HUB_CHAR_NO_OCPM 0x0010 /* No Over-current Protection support */
+
+#define HUB_CHAR_TTTT 0x0060 /* TT Think Time mask */
+#define HUB_CHAR_PORTIND 0x0080 /* per-port indicators (LEDs) */
struct usb_hub_status {
__le16 wHubStatus;
@@ -198,6 +206,17 @@
#define USB_DT_HUB_NONVAR_SIZE 7
#define USB_DT_SS_HUB_SIZE 12
+/*
+ * Hub Device descriptor
+ * USB Hub class device protocols
+ */
+
+#define USB_HUB_PR_FS 0 /* Full speed hub */
+#define USB_HUB_PR_HS_NO_TT 0 /* Hi-speed hub without TT */
+#define USB_HUB_PR_HS_SINGLE_TT 1 /* Hi-speed hub with single TT */
+#define USB_HUB_PR_HS_MULTI_TT 2 /* Hi-speed hub with multiple TT */
+#define USB_HUB_PR_SS 3 /* Super speed hub */
+
struct usb_hub_descriptor {
__u8 bDescLength;
__u8 bDescriptorType;
diff --git a/include/linux/usb/hcd.h b/include/linux/usb/hcd.h
index 03354d5..b2f62f3 100644
--- a/include/linux/usb/hcd.h
+++ b/include/linux/usb/hcd.h
@@ -99,7 +99,6 @@
*/
unsigned long flags;
#define HCD_FLAG_HW_ACCESSIBLE 0 /* at full power */
-#define HCD_FLAG_SAW_IRQ 1
#define HCD_FLAG_POLL_RH 2 /* poll for rh status? */
#define HCD_FLAG_POLL_PENDING 3 /* status has changed? */
#define HCD_FLAG_WAKEUP_PENDING 4 /* root hub is resuming? */
@@ -110,7 +109,6 @@
* be slightly faster than test_bit().
*/
#define HCD_HW_ACCESSIBLE(hcd) ((hcd)->flags & (1U << HCD_FLAG_HW_ACCESSIBLE))
-#define HCD_SAW_IRQ(hcd) ((hcd)->flags & (1U << HCD_FLAG_SAW_IRQ))
#define HCD_POLL_RH(hcd) ((hcd)->flags & (1U << HCD_FLAG_POLL_RH))
#define HCD_POLL_PENDING(hcd) ((hcd)->flags & (1U << HCD_FLAG_POLL_PENDING))
#define HCD_WAKEUP_PENDING(hcd) ((hcd)->flags & (1U << HCD_FLAG_WAKEUP_PENDING))
diff --git a/include/linux/usb/serial.h b/include/linux/usb/serial.h
index b29f70b..4267a9c 100644
--- a/include/linux/usb/serial.h
+++ b/include/linux/usb/serial.h
@@ -58,11 +58,13 @@
* @read_urb: pointer to the bulk in struct urb for this port.
* @bulk_in_endpointAddress: endpoint address for the bulk in pipe for this
* port.
+ * @bulk_in_buffers: pointers to the bulk in buffers for this port
+ * @read_urbs: pointers to the bulk in urbs for this port
+ * @read_urbs_free: status bitmap the for bulk in urbs
* @bulk_out_buffer: pointer to the bulk out buffer for this port.
* @bulk_out_size: the size of the bulk_out_buffer, in bytes.
* @write_urb: pointer to the bulk out struct urb for this port.
* @write_fifo: kfifo used to buffer outgoing data
- * @write_urb_busy: port`s writing status
* @bulk_out_buffers: pointers to the bulk out buffers for this port
* @write_urbs: pointers to the bulk out urbs for this port
* @write_urbs_free: status bitmap the for bulk out urbs
@@ -99,11 +101,14 @@
struct urb *read_urb;
__u8 bulk_in_endpointAddress;
+ unsigned char *bulk_in_buffers[2];
+ struct urb *read_urbs[2];
+ unsigned long read_urbs_free;
+
unsigned char *bulk_out_buffer;
int bulk_out_size;
struct urb *write_urb;
struct kfifo write_fifo;
- int write_urb_busy;
unsigned char *bulk_out_buffers[2];
struct urb *write_urbs[2];
@@ -340,7 +345,7 @@
extern void usb_serial_generic_release(struct usb_serial *serial);
extern int usb_serial_generic_register(int debug);
extern void usb_serial_generic_deregister(void);
-extern int usb_serial_generic_submit_read_urb(struct usb_serial_port *port,
+extern int usb_serial_generic_submit_read_urbs(struct usb_serial_port *port,
gfp_t mem_flags);
extern void usb_serial_generic_process_read_urb(struct urb *urb);
extern int usb_serial_generic_prepare_write_buffer(struct usb_serial_port *port,