[ARM] pxa: Add zylonite MFP wakeup configurations
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
diff --git a/arch/arm/mach-pxa/zylonite_pxa300.c b/arch/arm/mach-pxa/zylonite_pxa300.c
index 0e159a3..6ac04c0 100644
--- a/arch/arm/mach-pxa/zylonite_pxa300.c
+++ b/arch/arm/mach-pxa/zylonite_pxa300.c
@@ -53,13 +53,13 @@
/* BTUART */
GPIO111_UART2_RTS,
- GPIO112_UART2_RXD,
+ GPIO112_UART2_RXD | MFP_LPM_EDGE_FALL,
GPIO113_UART2_TXD,
- GPIO114_UART2_CTS,
+ GPIO114_UART2_CTS | MFP_LPM_EDGE_BOTH,
/* STUART */
GPIO109_UART3_TXD,
- GPIO110_UART3_RXD,
+ GPIO110_UART3_RXD | MFP_LPM_EDGE_FALL,
/* AC97 */
GPIO23_AC97_nACRESET,
@@ -70,16 +70,16 @@
GPIO28_AC97_SYNC,
/* Keypad */
- GPIO107_KP_DKIN_0,
- GPIO108_KP_DKIN_1,
- GPIO115_KP_MKIN_0,
- GPIO116_KP_MKIN_1,
- GPIO117_KP_MKIN_2,
- GPIO118_KP_MKIN_3,
- GPIO119_KP_MKIN_4,
- GPIO120_KP_MKIN_5,
- GPIO2_2_KP_MKIN_6,
- GPIO3_2_KP_MKIN_7,
+ GPIO107_KP_DKIN_0 | MFP_LPM_EDGE_BOTH,
+ GPIO108_KP_DKIN_1 | MFP_LPM_EDGE_BOTH,
+ GPIO115_KP_MKIN_0 | MFP_LPM_EDGE_BOTH,
+ GPIO116_KP_MKIN_1 | MFP_LPM_EDGE_BOTH,
+ GPIO117_KP_MKIN_2 | MFP_LPM_EDGE_BOTH,
+ GPIO118_KP_MKIN_3 | MFP_LPM_EDGE_BOTH,
+ GPIO119_KP_MKIN_4 | MFP_LPM_EDGE_BOTH,
+ GPIO120_KP_MKIN_5 | MFP_LPM_EDGE_BOTH,
+ GPIO2_2_KP_MKIN_6 | MFP_LPM_EDGE_BOTH,
+ GPIO3_2_KP_MKIN_7 | MFP_LPM_EDGE_BOTH,
GPIO121_KP_MKOUT_0,
GPIO122_KP_MKOUT_1,
GPIO123_KP_MKOUT_2,
@@ -91,7 +91,7 @@
/* MMC1 */
GPIO3_MMC1_DAT0,
- GPIO4_MMC1_DAT1,
+ GPIO4_MMC1_DAT1 | MFP_LPM_EDGE_BOTH,
GPIO5_MMC1_DAT2,
GPIO6_MMC1_DAT3,
GPIO7_MMC1_CLK,
@@ -100,7 +100,7 @@
/* MMC2 */
GPIO9_MMC2_DAT0,
- GPIO10_MMC2_DAT1,
+ GPIO10_MMC2_DAT1 | MFP_LPM_EDGE_BOTH,
GPIO11_MMC2_DAT2,
GPIO12_MMC2_DAT3,
GPIO13_MMC2_CLK,
@@ -109,12 +109,12 @@
static mfp_cfg_t pxa300_mfp_cfg[] __initdata = {
/* FFUART */
- GPIO30_UART1_RXD,
+ GPIO30_UART1_RXD | MFP_LPM_EDGE_FALL,
GPIO31_UART1_TXD,
GPIO32_UART1_CTS,
GPIO37_UART1_RTS,
GPIO33_UART1_DCD,
- GPIO34_UART1_DSR,
+ GPIO34_UART1_DSR | MFP_LPM_EDGE_FALL,
GPIO35_UART1_RI,
GPIO36_UART1_DTR,
@@ -125,7 +125,7 @@
static mfp_cfg_t pxa310_mfp_cfg[] __initdata = {
/* FFUART */
- GPIO99_UART1_RXD,
+ GPIO99_UART1_RXD | MFP_LPM_EDGE_FALL,
GPIO100_UART1_TXD,
GPIO101_UART1_CTS,
GPIO106_UART1_RTS,
@@ -136,7 +136,7 @@
/* MMC3 */
GPIO7_2_MMC3_DAT0,
- GPIO8_2_MMC3_DAT1,
+ GPIO8_2_MMC3_DAT1 | MFP_LPM_EDGE_BOTH,
GPIO9_2_MMC3_DAT2,
GPIO10_2_MMC3_DAT3,
GPIO103_MMC3_CLK,