i2c-s3c2410: sda_delay should be in ns, not clock ticks
The sda_delay field should be specified in ns, not in clock ticks
as when using cpufreq we could be changing the bus rate.
Signed-off-by: Ben Dooks <ben@simtec.co.uk>
diff --git a/arch/arm/plat-s3c/dev-i2c0.c b/arch/arm/plat-s3c/dev-i2c0.c
index fe32707..8eecb46 100644
--- a/arch/arm/plat-s3c/dev-i2c0.c
+++ b/arch/arm/plat-s3c/dev-i2c0.c
@@ -52,7 +52,7 @@
.slave_addr = 0x10,
.bus_freq = 100*1000,
.max_freq = 400*1000,
- .sda_delay = S3C2410_IICLC_SDA_DELAY5 | S3C2410_IICLC_FILTER_ON,
+ .sda_delay = 100,
};
void __init s3c_i2c0_set_platdata(struct s3c2410_platform_i2c *pd)
diff --git a/arch/arm/plat-s3c/dev-i2c1.c b/arch/arm/plat-s3c/dev-i2c1.c
index 2387fbf..4536e5b 100644
--- a/arch/arm/plat-s3c/dev-i2c1.c
+++ b/arch/arm/plat-s3c/dev-i2c1.c
@@ -49,7 +49,7 @@
.slave_addr = 0x10,
.bus_freq = 100*1000,
.max_freq = 400*1000,
- .sda_delay = S3C2410_IICLC_SDA_DELAY5 | S3C2410_IICLC_FILTER_ON,
+ .sda_delay = 100,
};
void __init s3c_i2c1_set_platdata(struct s3c2410_platform_i2c *pd)
diff --git a/drivers/i2c/busses/i2c-s3c2410.c b/drivers/i2c/busses/i2c-s3c2410.c
index 5b7f956..9d79756 100644
--- a/drivers/i2c/busses/i2c-s3c2410.c
+++ b/drivers/i2c/busses/i2c-s3c2410.c
@@ -663,6 +663,23 @@
writel(iiccon, i2c->regs + S3C2410_IICCON);
+ if (s3c24xx_i2c_is2440(i2c)) {
+ unsigned long sda_delay;
+
+ if (pdata->sda_delay) {
+ sda_delay = (freq / 1000) * pdata->sda_delay;
+ sda_delay /= 1000000;
+ sda_delay = DIV_ROUND_UP(sda_delay, 5);
+ if (sda_delay > 3)
+ sda_delay = 3;
+ sda_delay |= S3C2410_IICLC_FILTER_ON;
+ } else
+ sda_delay = 0;
+
+ dev_dbg(i2c->dev, "IICLC=%08lx\n", sda_delay);
+ writel(sda_delay, i2c->regs + S3C2440_IICLC);
+ }
+
return 0;
}
@@ -769,11 +786,8 @@
/* check for s3c2440 i2c controller */
- if (s3c24xx_i2c_is2440(i2c)) {
- dev_dbg(i2c->dev, "S3C2440_IICLC=%08x\n", pdata->sda_delay);
-
- writel(pdata->sda_delay, i2c->regs + S3C2440_IICLC);
- }
+ if (s3c24xx_i2c_is2440(i2c))
+ writel(0x0, i2c->regs + S3C2440_IICLC);
return 0;
}