ASoC: Avoid direct register cache access when setting defaults
Directly accessing the register cache means that we can't use anything
except a flat register cache so use snd_soc_update_bits().
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
diff --git a/sound/soc/codecs/wm8523.c b/sound/soc/codecs/wm8523.c
index 83e86f0..4fd4d8d 100644
--- a/sound/soc/codecs/wm8523.c
+++ b/sound/soc/codecs/wm8523.c
@@ -414,7 +414,6 @@
static int wm8523_probe(struct snd_soc_codec *codec)
{
struct wm8523_priv *wm8523 = snd_soc_codec_get_drvdata(codec);
- u16 *reg_cache = codec->reg_cache;
int ret, i;
codec->hw_write = (hw_write_t)i2c_master_send;
@@ -471,8 +470,9 @@
}
/* Change some default settings - latch VU and enable ZC */
- reg_cache[WM8523_DAC_GAINR] |= WM8523_DACR_VU;
- reg_cache[WM8523_DAC_CTRL3] |= WM8523_ZC;
+ snd_soc_update_bits(codec, WM8523_DAC_GAINR,
+ WM8523_DACR_VU, WM8523_DACR_VU);
+ snd_soc_update_bits(codec, WM8523_DAC_CTRL3, WM8523_ZC, WM8523_ZC);
wm8523_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
diff --git a/sound/soc/codecs/wm8741.c b/sound/soc/codecs/wm8741.c
index 494f2d3..25af901 100644
--- a/sound/soc/codecs/wm8741.c
+++ b/sound/soc/codecs/wm8741.c
@@ -421,7 +421,6 @@
static int wm8741_probe(struct snd_soc_codec *codec)
{
struct wm8741_priv *wm8741 = snd_soc_codec_get_drvdata(codec);
- u16 *reg_cache = codec->reg_cache;
int ret = 0;
ret = snd_soc_codec_set_cache_io(codec, 7, 9, wm8741->control_type);
@@ -437,10 +436,14 @@
}
/* Change some default settings - latch VU */
- reg_cache[WM8741_DACLLSB_ATTENUATION] |= WM8741_UPDATELL;
- reg_cache[WM8741_DACLMSB_ATTENUATION] |= WM8741_UPDATELM;
- reg_cache[WM8741_DACRLSB_ATTENUATION] |= WM8741_UPDATERL;
- reg_cache[WM8741_DACRLSB_ATTENUATION] |= WM8741_UPDATERM;
+ snd_soc_update_bits(codec, WM8741_DACLLSB_ATTENUATION,
+ WM8741_UPDATELL, WM8741_UPDATELL);
+ snd_soc_update_bits(codec, WM8741_DACLMSB_ATTENUATION,
+ WM8741_UPDATELM, WM8741_UPDATELM);
+ snd_soc_update_bits(codec, WM8741_DACRLSB_ATTENUATION,
+ WM8741_UPDATERL, WM8741_UPDATERL);
+ snd_soc_update_bits(codec, WM8741_DACRLSB_ATTENUATION,
+ WM8741_UPDATERM, WM8741_UPDATERM);
snd_soc_add_controls(codec, wm8741_snd_controls,
ARRAY_SIZE(wm8741_snd_controls));
diff --git a/sound/soc/codecs/wm8904.c b/sound/soc/codecs/wm8904.c
index 17a8fe9..443ae58 100644
--- a/sound/soc/codecs/wm8904.c
+++ b/sound/soc/codecs/wm8904.c
@@ -2436,19 +2436,28 @@
}
/* Change some default settings - latch VU and enable ZC */
- reg_cache[WM8904_ADC_DIGITAL_VOLUME_LEFT] |= WM8904_ADC_VU;
- reg_cache[WM8904_ADC_DIGITAL_VOLUME_RIGHT] |= WM8904_ADC_VU;
- reg_cache[WM8904_DAC_DIGITAL_VOLUME_LEFT] |= WM8904_DAC_VU;
- reg_cache[WM8904_DAC_DIGITAL_VOLUME_RIGHT] |= WM8904_DAC_VU;
- reg_cache[WM8904_ANALOGUE_OUT1_LEFT] |= WM8904_HPOUT_VU |
- WM8904_HPOUTLZC;
- reg_cache[WM8904_ANALOGUE_OUT1_RIGHT] |= WM8904_HPOUT_VU |
- WM8904_HPOUTRZC;
- reg_cache[WM8904_ANALOGUE_OUT2_LEFT] |= WM8904_LINEOUT_VU |
- WM8904_LINEOUTLZC;
- reg_cache[WM8904_ANALOGUE_OUT2_RIGHT] |= WM8904_LINEOUT_VU |
- WM8904_LINEOUTRZC;
- reg_cache[WM8904_CLOCK_RATES_0] &= ~WM8904_SR_MODE;
+ snd_soc_update_bits(codec, WM8904_ADC_DIGITAL_VOLUME_LEFT,
+ WM8904_ADC_VU, WM8904_ADC_VU);
+ snd_soc_update_bits(codec, WM8904_ADC_DIGITAL_VOLUME_RIGHT,
+ WM8904_ADC_VU, WM8904_ADC_VU);
+ snd_soc_update_bits(codec, WM8904_DAC_DIGITAL_VOLUME_LEFT,
+ WM8904_DAC_VU, WM8904_DAC_VU);
+ snd_soc_update_bits(codec, WM8904_DAC_DIGITAL_VOLUME_RIGHT,
+ WM8904_DAC_VU, WM8904_DAC_VU);
+ snd_soc_update_bits(codec, WM8904_ANALOGUE_OUT1_LEFT,
+ WM8904_HPOUT_VU | WM8904_HPOUTLZC,
+ WM8904_HPOUT_VU | WM8904_HPOUTLZC);
+ snd_soc_update_bits(codec, WM8904_ANALOGUE_OUT1_RIGHT,
+ WM8904_HPOUT_VU | WM8904_HPOUTRZC,
+ WM8904_HPOUT_VU | WM8904_HPOUTRZC);
+ snd_soc_update_bits(codec, WM8904_ANALOGUE_OUT2_LEFT,
+ WM8904_LINEOUT_VU | WM8904_LINEOUTLZC,
+ WM8904_LINEOUT_VU | WM8904_LINEOUTLZC);
+ snd_soc_update_bits(codec, WM8904_ANALOGUE_OUT2_RIGHT,
+ WM8904_LINEOUT_VU | WM8904_LINEOUTRZC,
+ WM8904_LINEOUT_VU | WM8904_LINEOUTRZC);
+ snd_soc_update_bits(codec, WM8904_CLOCK_RATES_0,
+ WM8904_SR_MODE, 0);
/* Apply configuration from the platform data. */
if (wm8904->pdata) {
@@ -2469,10 +2478,12 @@
/* Set Class W by default - this will be managed by the Class
* G widget at runtime where bypass paths are available.
*/
- reg_cache[WM8904_CLASS_W_0] |= WM8904_CP_DYN_PWR;
+ snd_soc_update_bits(codec, WM8904_CLASS_W_0,
+ WM8904_CP_DYN_PWR, WM8904_CP_DYN_PWR);
/* Use normal bias source */
- reg_cache[WM8904_BIAS_CONTROL_0] &= ~WM8904_POBCTRL;
+ snd_soc_update_bits(codec, WM8904_BIAS_CONTROL_0,
+ WM8904_POBCTRL, 0);
wm8904_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
diff --git a/sound/soc/codecs/wm8955.c b/sound/soc/codecs/wm8955.c
index 7167dfc..5e0214d 100644
--- a/sound/soc/codecs/wm8955.c
+++ b/sound/soc/codecs/wm8955.c
@@ -934,16 +934,27 @@
}
/* Change some default settings - latch VU and enable ZC */
- reg_cache[WM8955_LEFT_DAC_VOLUME] |= WM8955_LDVU;
- reg_cache[WM8955_RIGHT_DAC_VOLUME] |= WM8955_RDVU;
- reg_cache[WM8955_LOUT1_VOLUME] |= WM8955_LO1VU | WM8955_LO1ZC;
- reg_cache[WM8955_ROUT1_VOLUME] |= WM8955_RO1VU | WM8955_RO1ZC;
- reg_cache[WM8955_LOUT2_VOLUME] |= WM8955_LO2VU | WM8955_LO2ZC;
- reg_cache[WM8955_ROUT2_VOLUME] |= WM8955_RO2VU | WM8955_RO2ZC;
- reg_cache[WM8955_MONOOUT_VOLUME] |= WM8955_MOZC;
+ snd_soc_update_bits(codec, WM8955_LEFT_DAC_VOLUME,
+ WM8955_LDVU, WM8955_LDVU);
+ snd_soc_update_bits(codec, WM8955_RIGHT_DAC_VOLUME,
+ WM8955_RDVU, WM8955_RDVU);
+ snd_soc_update_bits(codec, WM8955_LOUT1_VOLUME,
+ WM8955_LO1VU | WM8955_LO1ZC,
+ WM8955_LO1VU | WM8955_LO1ZC);
+ snd_soc_update_bits(codec, WM8955_ROUT1_VOLUME,
+ WM8955_RO1VU | WM8955_RO1ZC,
+ WM8955_RO1VU | WM8955_RO1ZC);
+ snd_soc_update_bits(codec, WM8955_LOUT2_VOLUME,
+ WM8955_LO2VU | WM8955_LO2ZC,
+ WM8955_LO2VU | WM8955_LO2ZC);
+ snd_soc_update_bits(codec, WM8955_ROUT2_VOLUME,
+ WM8955_RO2VU | WM8955_RO2ZC,
+ WM8955_RO2VU | WM8955_RO2ZC);
+ snd_soc_update_bits(codec, WM8955_MONOOUT_VOLUME,
+ WM8955_MOZC, WM8955_MOZC);
/* Also enable adaptive bass boost by default */
- reg_cache[WM8955_BASS_CONTROL] |= WM8955_BB;
+ snd_soc_update_bits(codec, WM8955_BASS_CONTROL, WM8955_BB, WM8955_BB);
/* Set platform data values */
if (pdata) {
diff --git a/sound/soc/codecs/wm8962.c b/sound/soc/codecs/wm8962.c
index 7c02924..5c7b730 100644
--- a/sound/soc/codecs/wm8962.c
+++ b/sound/soc/codecs/wm8962.c
@@ -3822,16 +3822,26 @@
}
/* Latch volume update bits */
- reg_cache[WM8962_LEFT_INPUT_VOLUME] |= WM8962_IN_VU;
- reg_cache[WM8962_RIGHT_INPUT_VOLUME] |= WM8962_IN_VU;
- reg_cache[WM8962_LEFT_ADC_VOLUME] |= WM8962_ADC_VU;
- reg_cache[WM8962_RIGHT_ADC_VOLUME] |= WM8962_ADC_VU;
- reg_cache[WM8962_LEFT_DAC_VOLUME] |= WM8962_DAC_VU;
- reg_cache[WM8962_RIGHT_DAC_VOLUME] |= WM8962_DAC_VU;
- reg_cache[WM8962_SPKOUTL_VOLUME] |= WM8962_SPKOUT_VU;
- reg_cache[WM8962_SPKOUTR_VOLUME] |= WM8962_SPKOUT_VU;
- reg_cache[WM8962_HPOUTL_VOLUME] |= WM8962_HPOUT_VU;
- reg_cache[WM8962_HPOUTR_VOLUME] |= WM8962_HPOUT_VU;
+ snd_soc_update_bits(codec, WM8962_LEFT_INPUT_VOLUME,
+ WM8962_IN_VU, WM8962_IN_VU);
+ snd_soc_update_bits(codec, WM8962_RIGHT_INPUT_VOLUME,
+ WM8962_IN_VU, WM8962_IN_VU);
+ snd_soc_update_bits(codec, WM8962_LEFT_ADC_VOLUME,
+ WM8962_ADC_VU, WM8962_ADC_VU);
+ snd_soc_update_bits(codec, WM8962_RIGHT_ADC_VOLUME,
+ WM8962_ADC_VU, WM8962_ADC_VU);
+ snd_soc_update_bits(codec, WM8962_LEFT_DAC_VOLUME,
+ WM8962_DAC_VU, WM8962_DAC_VU);
+ snd_soc_update_bits(codec, WM8962_RIGHT_DAC_VOLUME,
+ WM8962_DAC_VU, WM8962_DAC_VU);
+ snd_soc_update_bits(codec, WM8962_SPKOUTL_VOLUME,
+ WM8962_SPKOUT_VU, WM8962_SPKOUT_VU);
+ snd_soc_update_bits(codec, WM8962_SPKOUTR_VOLUME,
+ WM8962_SPKOUT_VU, WM8962_SPKOUT_VU);
+ snd_soc_update_bits(codec, WM8962_HPOUTL_VOLUME,
+ WM8962_HPOUT_VU, WM8962_HPOUT_VU);
+ snd_soc_update_bits(codec, WM8962_HPOUTR_VOLUME,
+ WM8962_HPOUT_VU, WM8962_HPOUT_VU);
wm8962_add_widgets(codec);
diff --git a/sound/soc/codecs/wm8978.c b/sound/soc/codecs/wm8978.c
index 4bbc344..30fb48e 100644
--- a/sound/soc/codecs/wm8978.c
+++ b/sound/soc/codecs/wm8978.c
@@ -965,7 +965,7 @@
* written.
*/
for (i = 0; i < ARRAY_SIZE(update_reg); i++)
- ((u16 *)codec->reg_cache)[update_reg[i]] |= 0x100;
+ snd_soc_update_bits(codec, update_reg[i], 0x100, 0x100);
/* Reset the codec */
ret = snd_soc_write(codec, WM8978_RESET, 0);
diff --git a/sound/soc/codecs/wm9090.c b/sound/soc/codecs/wm9090.c
index d40bfc9..4de1220 100644
--- a/sound/soc/codecs/wm9090.c
+++ b/sound/soc/codecs/wm9090.c
@@ -551,7 +551,6 @@
static int wm9090_probe(struct snd_soc_codec *codec)
{
struct wm9090_priv *wm9090 = snd_soc_codec_get_drvdata(codec);
- u16 *reg_cache = codec->reg_cache;
int ret;
codec->control_data = wm9090->control_data;
@@ -576,22 +575,30 @@
/* Configure some defaults; they will be written out when we
* bring the bias up.
*/
- reg_cache[WM9090_IN1_LINE_INPUT_A_VOLUME] |= WM9090_IN1_VU
- | WM9090_IN1A_ZC;
- reg_cache[WM9090_IN1_LINE_INPUT_B_VOLUME] |= WM9090_IN1_VU
- | WM9090_IN1B_ZC;
- reg_cache[WM9090_IN2_LINE_INPUT_A_VOLUME] |= WM9090_IN2_VU
- | WM9090_IN2A_ZC;
- reg_cache[WM9090_IN2_LINE_INPUT_B_VOLUME] |= WM9090_IN2_VU
- | WM9090_IN2B_ZC;
- reg_cache[WM9090_SPEAKER_VOLUME_LEFT] |=
- WM9090_SPKOUT_VU | WM9090_SPKOUTL_ZC;
- reg_cache[WM9090_LEFT_OUTPUT_VOLUME] |=
- WM9090_HPOUT1_VU | WM9090_HPOUT1L_ZC;
- reg_cache[WM9090_RIGHT_OUTPUT_VOLUME] |=
- WM9090_HPOUT1_VU | WM9090_HPOUT1R_ZC;
+ snd_soc_update_bits(codec, WM9090_IN1_LINE_INPUT_A_VOLUME,
+ WM9090_IN1_VU | WM9090_IN1A_ZC,
+ WM9090_IN1_VU | WM9090_IN1A_ZC);
+ snd_soc_update_bits(codec, WM9090_IN1_LINE_INPUT_B_VOLUME,
+ WM9090_IN1_VU | WM9090_IN1B_ZC,
+ WM9090_IN1_VU | WM9090_IN1B_ZC);
+ snd_soc_update_bits(codec, WM9090_IN2_LINE_INPUT_A_VOLUME,
+ WM9090_IN2_VU | WM9090_IN2A_ZC,
+ WM9090_IN2_VU | WM9090_IN2A_ZC);
+ snd_soc_update_bits(codec, WM9090_IN2_LINE_INPUT_B_VOLUME,
+ WM9090_IN2_VU | WM9090_IN2B_ZC,
+ WM9090_IN2_VU | WM9090_IN2B_ZC);
+ snd_soc_update_bits(codec, WM9090_SPEAKER_VOLUME_LEFT,
+ WM9090_SPKOUT_VU | WM9090_SPKOUTL_ZC,
+ WM9090_SPKOUT_VU | WM9090_SPKOUTL_ZC);
+ snd_soc_update_bits(codec, WM9090_LEFT_OUTPUT_VOLUME,
+ WM9090_HPOUT1_VU | WM9090_HPOUT1L_ZC,
+ WM9090_HPOUT1_VU | WM9090_HPOUT1L_ZC);
+ snd_soc_update_bits(codec, WM9090_RIGHT_OUTPUT_VOLUME,
+ WM9090_HPOUT1_VU | WM9090_HPOUT1R_ZC,
+ WM9090_HPOUT1_VU | WM9090_HPOUT1R_ZC);
- reg_cache[WM9090_CLOCKING_1] |= WM9090_TOCLK_ENA;
+ snd_soc_update_bits(codec, WM9090_CLOCKING_1,
+ WM9090_TOCLK_ENA, WM9090_TOCLK_ENA);
wm9090_set_bias_level(codec, SND_SOC_BIAS_STANDBY);