| /* |
| * max14577.c - mfd core driver for the Maxim 14577/77836 |
| * |
| * Copyright (C) 2014 Samsung Electronics |
| * Chanwoo Choi <cw00.choi@samsung.com> |
| * Krzysztof Kozlowski <k.kozlowski@samsung.com> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * This driver is based on max8997.c |
| */ |
| |
| #include <linux/err.h> |
| #include <linux/module.h> |
| #include <linux/interrupt.h> |
| #include <linux/of_device.h> |
| #include <linux/mfd/core.h> |
| #include <linux/mfd/max14577.h> |
| #include <linux/mfd/max14577-private.h> |
| |
| /* |
| * Table of valid charger currents for different Maxim chipsets. |
| * It is placed here because it is used by both charger and regulator driver. |
| */ |
| const struct maxim_charger_current maxim_charger_currents[] = { |
| [MAXIM_DEVICE_TYPE_UNKNOWN] = { 0, 0, 0, 0 }, |
| [MAXIM_DEVICE_TYPE_MAX14577] = { |
| .min = MAX14577_CHARGER_CURRENT_LIMIT_MIN, |
| .high_start = MAX14577_CHARGER_CURRENT_LIMIT_HIGH_START, |
| .high_step = MAX14577_CHARGER_CURRENT_LIMIT_HIGH_STEP, |
| .max = MAX14577_CHARGER_CURRENT_LIMIT_MAX, |
| }, |
| [MAXIM_DEVICE_TYPE_MAX77836] = { |
| .min = MAX77836_CHARGER_CURRENT_LIMIT_MIN, |
| .high_start = MAX77836_CHARGER_CURRENT_LIMIT_HIGH_START, |
| .high_step = MAX77836_CHARGER_CURRENT_LIMIT_HIGH_STEP, |
| .max = MAX77836_CHARGER_CURRENT_LIMIT_MAX, |
| }, |
| }; |
| EXPORT_SYMBOL_GPL(maxim_charger_currents); |
| |
| /* |
| * maxim_charger_calc_reg_current - Calculate register value for current |
| * @limits: constraints for charger, matching the MBCICHWRC register |
| * @min_ua: minimal requested current, micro Amps |
| * @max_ua: maximum requested current, micro Amps |
| * @dst: destination to store calculated register value |
| * |
| * Calculates the value of MBCICHWRC (Fast Battery Charge Current) register |
| * for given current and stores it under pointed 'dst'. The stored value |
| * combines low bit (MBCICHWRCL) and high bits (MBCICHWRCH). It is also |
| * properly shifted. |
| * |
| * The calculated register value matches the current which: |
| * - is always between <limits.min, limits.max>; |
| * - is always less or equal to max_ua; |
| * - is the highest possible value; |
| * - may be lower than min_ua. |
| * |
| * On success returns 0. On error returns -EINVAL (requested min/max current |
| * is outside of given charger limits) and 'dst' is not set. |
| */ |
| int maxim_charger_calc_reg_current(const struct maxim_charger_current *limits, |
| unsigned int min_ua, unsigned int max_ua, u8 *dst) |
| { |
| unsigned int current_bits = 0xf; |
| |
| if (min_ua > max_ua) |
| return -EINVAL; |
| |
| if (min_ua > limits->max || max_ua < limits->min) |
| return -EINVAL; |
| |
| if (max_ua < limits->high_start) { |
| /* |
| * Less than high_start, so set the minimal current |
| * (turn Low Bit off, 0 as high bits). |
| */ |
| *dst = 0x0; |
| return 0; |
| } |
| |
| /* max_ua is in range: <high_start, infinite>, cut it to limits.max */ |
| max_ua = min(limits->max, max_ua); |
| max_ua -= limits->high_start; |
| /* |
| * There is no risk of overflow 'max_ua' here because: |
| * - max_ua >= limits.high_start |
| * - BUILD_BUG checks that 'limits' are: max >= high_start + high_step |
| */ |
| current_bits = max_ua / limits->high_step; |
| |
| /* Turn Low Bit on (use range <limits.high_start, limits.max>) ... */ |
| *dst = 0x1 << CHGCTRL4_MBCICHWRCL_SHIFT; |
| /* and set proper High Bits */ |
| *dst |= current_bits << CHGCTRL4_MBCICHWRCH_SHIFT; |
| |
| return 0; |
| } |
| EXPORT_SYMBOL_GPL(maxim_charger_calc_reg_current); |
| |
| static const struct mfd_cell max14577_devs[] = { |
| { |
| .name = "max14577-muic", |
| .of_compatible = "maxim,max14577-muic", |
| }, |
| { |
| .name = "max14577-regulator", |
| .of_compatible = "maxim,max14577-regulator", |
| }, |
| { |
| .name = "max14577-charger", |
| .of_compatible = "maxim,max14577-charger", |
| }, |
| }; |
| |
| static const struct mfd_cell max77836_devs[] = { |
| { |
| .name = "max77836-muic", |
| .of_compatible = "maxim,max77836-muic", |
| }, |
| { |
| .name = "max77836-regulator", |
| .of_compatible = "maxim,max77836-regulator", |
| }, |
| { |
| .name = "max77836-charger", |
| .of_compatible = "maxim,max77836-charger", |
| }, |
| { |
| .name = "max77836-battery", |
| .of_compatible = "maxim,max77836-battery", |
| }, |
| }; |
| |
| static const struct of_device_id max14577_dt_match[] = { |
| { |
| .compatible = "maxim,max14577", |
| .data = (void *)MAXIM_DEVICE_TYPE_MAX14577, |
| }, |
| { |
| .compatible = "maxim,max77836", |
| .data = (void *)MAXIM_DEVICE_TYPE_MAX77836, |
| }, |
| {}, |
| }; |
| |
| static bool max14577_muic_volatile_reg(struct device *dev, unsigned int reg) |
| { |
| switch (reg) { |
| case MAX14577_REG_INT1 ... MAX14577_REG_STATUS3: |
| return true; |
| default: |
| break; |
| } |
| return false; |
| } |
| |
| static bool max77836_muic_volatile_reg(struct device *dev, unsigned int reg) |
| { |
| /* Any max14577 volatile registers are also max77836 volatile. */ |
| if (max14577_muic_volatile_reg(dev, reg)) |
| return true; |
| |
| switch (reg) { |
| case MAX77836_FG_REG_VCELL_MSB ... MAX77836_FG_REG_SOC_LSB: |
| case MAX77836_FG_REG_CRATE_MSB ... MAX77836_FG_REG_CRATE_LSB: |
| case MAX77836_FG_REG_STATUS_H ... MAX77836_FG_REG_STATUS_L: |
| case MAX77836_PMIC_REG_INTSRC: |
| case MAX77836_PMIC_REG_TOPSYS_INT: |
| case MAX77836_PMIC_REG_TOPSYS_STAT: |
| return true; |
| default: |
| break; |
| } |
| return false; |
| } |
| |
| static const struct regmap_config max14577_muic_regmap_config = { |
| .reg_bits = 8, |
| .val_bits = 8, |
| .volatile_reg = max14577_muic_volatile_reg, |
| .max_register = MAX14577_REG_END, |
| }; |
| |
| static const struct regmap_config max77836_pmic_regmap_config = { |
| .reg_bits = 8, |
| .val_bits = 8, |
| .volatile_reg = max77836_muic_volatile_reg, |
| .max_register = MAX77836_PMIC_REG_END, |
| }; |
| |
| static const struct regmap_irq max14577_irqs[] = { |
| /* INT1 interrupts */ |
| { .reg_offset = 0, .mask = MAX14577_INT1_ADC_MASK, }, |
| { .reg_offset = 0, .mask = MAX14577_INT1_ADCLOW_MASK, }, |
| { .reg_offset = 0, .mask = MAX14577_INT1_ADCERR_MASK, }, |
| /* INT2 interrupts */ |
| { .reg_offset = 1, .mask = MAX14577_INT2_CHGTYP_MASK, }, |
| { .reg_offset = 1, .mask = MAX14577_INT2_CHGDETRUN_MASK, }, |
| { .reg_offset = 1, .mask = MAX14577_INT2_DCDTMR_MASK, }, |
| { .reg_offset = 1, .mask = MAX14577_INT2_DBCHG_MASK, }, |
| { .reg_offset = 1, .mask = MAX14577_INT2_VBVOLT_MASK, }, |
| /* INT3 interrupts */ |
| { .reg_offset = 2, .mask = MAX14577_INT3_EOC_MASK, }, |
| { .reg_offset = 2, .mask = MAX14577_INT3_CGMBC_MASK, }, |
| { .reg_offset = 2, .mask = MAX14577_INT3_OVP_MASK, }, |
| { .reg_offset = 2, .mask = MAX14577_INT3_MBCCHGERR_MASK, }, |
| }; |
| |
| static const struct regmap_irq_chip max14577_irq_chip = { |
| .name = "max14577", |
| .status_base = MAX14577_REG_INT1, |
| .mask_base = MAX14577_REG_INTMASK1, |
| .mask_invert = true, |
| .num_regs = 3, |
| .irqs = max14577_irqs, |
| .num_irqs = ARRAY_SIZE(max14577_irqs), |
| }; |
| |
| static const struct regmap_irq max77836_muic_irqs[] = { |
| /* INT1 interrupts */ |
| { .reg_offset = 0, .mask = MAX14577_INT1_ADC_MASK, }, |
| { .reg_offset = 0, .mask = MAX14577_INT1_ADCLOW_MASK, }, |
| { .reg_offset = 0, .mask = MAX14577_INT1_ADCERR_MASK, }, |
| { .reg_offset = 0, .mask = MAX77836_INT1_ADC1K_MASK, }, |
| /* INT2 interrupts */ |
| { .reg_offset = 1, .mask = MAX14577_INT2_CHGTYP_MASK, }, |
| { .reg_offset = 1, .mask = MAX14577_INT2_CHGDETRUN_MASK, }, |
| { .reg_offset = 1, .mask = MAX14577_INT2_DCDTMR_MASK, }, |
| { .reg_offset = 1, .mask = MAX14577_INT2_DBCHG_MASK, }, |
| { .reg_offset = 1, .mask = MAX14577_INT2_VBVOLT_MASK, }, |
| { .reg_offset = 1, .mask = MAX77836_INT2_VIDRM_MASK, }, |
| /* INT3 interrupts */ |
| { .reg_offset = 2, .mask = MAX14577_INT3_EOC_MASK, }, |
| { .reg_offset = 2, .mask = MAX14577_INT3_CGMBC_MASK, }, |
| { .reg_offset = 2, .mask = MAX14577_INT3_OVP_MASK, }, |
| { .reg_offset = 2, .mask = MAX14577_INT3_MBCCHGERR_MASK, }, |
| }; |
| |
| static const struct regmap_irq_chip max77836_muic_irq_chip = { |
| .name = "max77836-muic", |
| .status_base = MAX14577_REG_INT1, |
| .mask_base = MAX14577_REG_INTMASK1, |
| .mask_invert = true, |
| .num_regs = 3, |
| .irqs = max77836_muic_irqs, |
| .num_irqs = ARRAY_SIZE(max77836_muic_irqs), |
| }; |
| |
| static const struct regmap_irq max77836_pmic_irqs[] = { |
| { .reg_offset = 0, .mask = MAX77836_TOPSYS_INT_T120C_MASK, }, |
| { .reg_offset = 0, .mask = MAX77836_TOPSYS_INT_T140C_MASK, }, |
| }; |
| |
| static const struct regmap_irq_chip max77836_pmic_irq_chip = { |
| .name = "max77836-pmic", |
| .status_base = MAX77836_PMIC_REG_TOPSYS_INT, |
| .mask_base = MAX77836_PMIC_REG_TOPSYS_INT_MASK, |
| .mask_invert = false, |
| .num_regs = 1, |
| .irqs = max77836_pmic_irqs, |
| .num_irqs = ARRAY_SIZE(max77836_pmic_irqs), |
| }; |
| |
| static void max14577_print_dev_type(struct max14577 *max14577) |
| { |
| u8 reg_data, vendor_id, device_id; |
| int ret; |
| |
| ret = max14577_read_reg(max14577->regmap, MAX14577_REG_DEVICEID, |
| ®_data); |
| if (ret) { |
| dev_err(max14577->dev, |
| "Failed to read DEVICEID register: %d\n", ret); |
| return; |
| } |
| |
| vendor_id = ((reg_data & DEVID_VENDORID_MASK) >> |
| DEVID_VENDORID_SHIFT); |
| device_id = ((reg_data & DEVID_DEVICEID_MASK) >> |
| DEVID_DEVICEID_SHIFT); |
| |
| dev_info(max14577->dev, "Device type: %u (ID: 0x%x, vendor: 0x%x)\n", |
| max14577->dev_type, device_id, vendor_id); |
| } |
| |
| /* |
| * Max77836 specific initialization code for driver probe. |
| * Adds new I2C dummy device, regmap and regmap IRQ chip. |
| * Unmasks Interrupt Source register. |
| * |
| * On success returns 0. |
| * On failure returns errno and reverts any changes done so far (e.g. remove |
| * I2C dummy device), except masking the INT SRC register. |
| */ |
| static int max77836_init(struct max14577 *max14577) |
| { |
| int ret; |
| u8 intsrc_mask; |
| |
| max14577->i2c_pmic = i2c_new_dummy(max14577->i2c->adapter, |
| I2C_ADDR_PMIC); |
| if (!max14577->i2c_pmic) { |
| dev_err(max14577->dev, "Failed to register PMIC I2C device\n"); |
| return -ENODEV; |
| } |
| i2c_set_clientdata(max14577->i2c_pmic, max14577); |
| |
| max14577->regmap_pmic = devm_regmap_init_i2c(max14577->i2c_pmic, |
| &max77836_pmic_regmap_config); |
| if (IS_ERR(max14577->regmap_pmic)) { |
| ret = PTR_ERR(max14577->regmap_pmic); |
| dev_err(max14577->dev, "Failed to allocate PMIC register map: %d\n", |
| ret); |
| goto err; |
| } |
| |
| /* Un-mask MAX77836 Interrupt Source register */ |
| ret = max14577_read_reg(max14577->regmap_pmic, |
| MAX77836_PMIC_REG_INTSRC_MASK, &intsrc_mask); |
| if (ret < 0) { |
| dev_err(max14577->dev, "Failed to read PMIC register\n"); |
| goto err; |
| } |
| |
| intsrc_mask &= ~(MAX77836_INTSRC_MASK_TOP_INT_MASK); |
| intsrc_mask &= ~(MAX77836_INTSRC_MASK_MUIC_CHG_INT_MASK); |
| ret = max14577_write_reg(max14577->regmap_pmic, |
| MAX77836_PMIC_REG_INTSRC_MASK, intsrc_mask); |
| if (ret < 0) { |
| dev_err(max14577->dev, "Failed to write PMIC register\n"); |
| goto err; |
| } |
| |
| ret = regmap_add_irq_chip(max14577->regmap_pmic, max14577->irq, |
| IRQF_TRIGGER_FALLING | IRQF_ONESHOT | IRQF_SHARED, |
| 0, &max77836_pmic_irq_chip, |
| &max14577->irq_data_pmic); |
| if (ret != 0) { |
| dev_err(max14577->dev, "Failed to request PMIC IRQ %d: %d\n", |
| max14577->irq, ret); |
| goto err; |
| } |
| |
| return 0; |
| |
| err: |
| i2c_unregister_device(max14577->i2c_pmic); |
| |
| return ret; |
| } |
| |
| /* |
| * Max77836 specific de-initialization code for driver remove. |
| */ |
| static void max77836_remove(struct max14577 *max14577) |
| { |
| regmap_del_irq_chip(max14577->irq, max14577->irq_data_pmic); |
| i2c_unregister_device(max14577->i2c_pmic); |
| } |
| |
| static int max14577_i2c_probe(struct i2c_client *i2c, |
| const struct i2c_device_id *id) |
| { |
| struct max14577 *max14577; |
| struct max14577_platform_data *pdata = dev_get_platdata(&i2c->dev); |
| struct device_node *np = i2c->dev.of_node; |
| int ret = 0; |
| const struct regmap_irq_chip *irq_chip; |
| const struct mfd_cell *mfd_devs; |
| unsigned int mfd_devs_size; |
| int irq_flags; |
| |
| if (np) { |
| pdata = devm_kzalloc(&i2c->dev, sizeof(*pdata), GFP_KERNEL); |
| if (!pdata) |
| return -ENOMEM; |
| i2c->dev.platform_data = pdata; |
| } |
| |
| if (!pdata) { |
| dev_err(&i2c->dev, "No platform data found.\n"); |
| return -EINVAL; |
| } |
| |
| max14577 = devm_kzalloc(&i2c->dev, sizeof(*max14577), GFP_KERNEL); |
| if (!max14577) |
| return -ENOMEM; |
| |
| i2c_set_clientdata(i2c, max14577); |
| max14577->dev = &i2c->dev; |
| max14577->i2c = i2c; |
| max14577->irq = i2c->irq; |
| |
| max14577->regmap = devm_regmap_init_i2c(i2c, |
| &max14577_muic_regmap_config); |
| if (IS_ERR(max14577->regmap)) { |
| ret = PTR_ERR(max14577->regmap); |
| dev_err(max14577->dev, "Failed to allocate register map: %d\n", |
| ret); |
| return ret; |
| } |
| |
| if (np) { |
| const struct of_device_id *of_id; |
| |
| of_id = of_match_device(max14577_dt_match, &i2c->dev); |
| if (of_id) |
| max14577->dev_type = |
| (enum maxim_device_type)of_id->data; |
| } else { |
| max14577->dev_type = id->driver_data; |
| } |
| |
| max14577_print_dev_type(max14577); |
| |
| switch (max14577->dev_type) { |
| case MAXIM_DEVICE_TYPE_MAX77836: |
| irq_chip = &max77836_muic_irq_chip; |
| mfd_devs = max77836_devs; |
| mfd_devs_size = ARRAY_SIZE(max77836_devs); |
| irq_flags = IRQF_TRIGGER_FALLING | IRQF_ONESHOT | IRQF_SHARED; |
| break; |
| case MAXIM_DEVICE_TYPE_MAX14577: |
| default: |
| irq_chip = &max14577_irq_chip; |
| mfd_devs = max14577_devs; |
| mfd_devs_size = ARRAY_SIZE(max14577_devs); |
| irq_flags = IRQF_TRIGGER_FALLING | IRQF_ONESHOT; |
| break; |
| } |
| |
| ret = regmap_add_irq_chip(max14577->regmap, max14577->irq, |
| irq_flags, 0, irq_chip, |
| &max14577->irq_data); |
| if (ret != 0) { |
| dev_err(&i2c->dev, "Failed to request IRQ %d: %d\n", |
| max14577->irq, ret); |
| return ret; |
| } |
| |
| /* Max77836 specific initialization code (additional regmap) */ |
| if (max14577->dev_type == MAXIM_DEVICE_TYPE_MAX77836) { |
| ret = max77836_init(max14577); |
| if (ret < 0) |
| goto err_max77836; |
| } |
| |
| ret = mfd_add_devices(max14577->dev, -1, mfd_devs, |
| mfd_devs_size, NULL, 0, NULL); |
| if (ret < 0) |
| goto err_mfd; |
| |
| device_init_wakeup(max14577->dev, 1); |
| |
| return 0; |
| |
| err_mfd: |
| if (max14577->dev_type == MAXIM_DEVICE_TYPE_MAX77836) |
| max77836_remove(max14577); |
| err_max77836: |
| regmap_del_irq_chip(max14577->irq, max14577->irq_data); |
| |
| return ret; |
| } |
| |
| static int max14577_i2c_remove(struct i2c_client *i2c) |
| { |
| struct max14577 *max14577 = i2c_get_clientdata(i2c); |
| |
| mfd_remove_devices(max14577->dev); |
| regmap_del_irq_chip(max14577->irq, max14577->irq_data); |
| if (max14577->dev_type == MAXIM_DEVICE_TYPE_MAX77836) |
| max77836_remove(max14577); |
| |
| return 0; |
| } |
| |
| static const struct i2c_device_id max14577_i2c_id[] = { |
| { "max14577", MAXIM_DEVICE_TYPE_MAX14577, }, |
| { "max77836", MAXIM_DEVICE_TYPE_MAX77836, }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(i2c, max14577_i2c_id); |
| |
| #ifdef CONFIG_PM_SLEEP |
| static int max14577_suspend(struct device *dev) |
| { |
| struct i2c_client *i2c = to_i2c_client(dev); |
| struct max14577 *max14577 = i2c_get_clientdata(i2c); |
| |
| if (device_may_wakeup(dev)) |
| enable_irq_wake(max14577->irq); |
| /* |
| * MUIC IRQ must be disabled during suspend because if it happens |
| * while suspended it will be handled before resuming I2C. |
| * |
| * When device is woken up from suspend (e.g. by ADC change), |
| * an interrupt occurs before resuming I2C bus controller. |
| * Interrupt handler tries to read registers but this read |
| * will fail because I2C is still suspended. |
| */ |
| disable_irq(max14577->irq); |
| |
| return 0; |
| } |
| |
| static int max14577_resume(struct device *dev) |
| { |
| struct i2c_client *i2c = to_i2c_client(dev); |
| struct max14577 *max14577 = i2c_get_clientdata(i2c); |
| |
| if (device_may_wakeup(dev)) |
| disable_irq_wake(max14577->irq); |
| enable_irq(max14577->irq); |
| |
| return 0; |
| } |
| #endif /* CONFIG_PM_SLEEP */ |
| |
| static SIMPLE_DEV_PM_OPS(max14577_pm, max14577_suspend, max14577_resume); |
| |
| static struct i2c_driver max14577_i2c_driver = { |
| .driver = { |
| .name = "max14577", |
| .pm = &max14577_pm, |
| .of_match_table = max14577_dt_match, |
| }, |
| .probe = max14577_i2c_probe, |
| .remove = max14577_i2c_remove, |
| .id_table = max14577_i2c_id, |
| }; |
| |
| static int __init max14577_i2c_init(void) |
| { |
| BUILD_BUG_ON(ARRAY_SIZE(max14577_i2c_id) != MAXIM_DEVICE_TYPE_NUM); |
| BUILD_BUG_ON(ARRAY_SIZE(max14577_dt_match) != MAXIM_DEVICE_TYPE_NUM); |
| |
| /* Valid charger current values must be provided for each chipset */ |
| BUILD_BUG_ON(ARRAY_SIZE(maxim_charger_currents) != MAXIM_DEVICE_TYPE_NUM); |
| |
| /* Check for valid values for charger */ |
| BUILD_BUG_ON(MAX14577_CHARGER_CURRENT_LIMIT_HIGH_START + |
| MAX14577_CHARGER_CURRENT_LIMIT_HIGH_STEP * 0xf != |
| MAX14577_CHARGER_CURRENT_LIMIT_MAX); |
| BUILD_BUG_ON(MAX14577_CHARGER_CURRENT_LIMIT_HIGH_STEP == 0); |
| |
| BUILD_BUG_ON(MAX77836_CHARGER_CURRENT_LIMIT_HIGH_START + |
| MAX77836_CHARGER_CURRENT_LIMIT_HIGH_STEP * 0xf != |
| MAX77836_CHARGER_CURRENT_LIMIT_MAX); |
| BUILD_BUG_ON(MAX77836_CHARGER_CURRENT_LIMIT_HIGH_STEP == 0); |
| |
| return i2c_add_driver(&max14577_i2c_driver); |
| } |
| module_init(max14577_i2c_init); |
| |
| static void __exit max14577_i2c_exit(void) |
| { |
| i2c_del_driver(&max14577_i2c_driver); |
| } |
| module_exit(max14577_i2c_exit); |
| |
| MODULE_AUTHOR("Chanwoo Choi <cw00.choi@samsung.com>, Krzysztof Kozlowski <k.kozlowski@samsung.com>"); |
| MODULE_DESCRIPTION("Maxim 14577/77836 multi-function core driver"); |
| MODULE_LICENSE("GPL"); |