| /* |
| * Copyright 2010 Broadcom |
| * Copyright 2012 Simon Arlott, Chris Boot, Stephen Warren |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * Quirk 1: Shortcut interrupts don't set the bank 1/2 register pending bits |
| * |
| * If an interrupt fires on bank 1 that isn't in the shortcuts list, bit 8 |
| * on bank 0 is set to signify that an interrupt in bank 1 has fired, and |
| * to look in the bank 1 status register for more information. |
| * |
| * If an interrupt fires on bank 1 that _is_ in the shortcuts list, its |
| * shortcut bit in bank 0 is set as well as its interrupt bit in the bank 1 |
| * status register, but bank 0 bit 8 is _not_ set. |
| * |
| * Quirk 2: You can't mask the register 1/2 pending interrupts |
| * |
| * In a proper cascaded interrupt controller, the interrupt lines with |
| * cascaded interrupt controllers on them are just normal interrupt lines. |
| * You can mask the interrupts and get on with things. With this controller |
| * you can't do that. |
| * |
| * Quirk 3: The shortcut interrupts can't be (un)masked in bank 0 |
| * |
| * Those interrupts that have shortcuts can only be masked/unmasked in |
| * their respective banks' enable/disable registers. Doing so in the bank 0 |
| * enable/disable registers has no effect. |
| * |
| * The FIQ control register: |
| * Bits 0-6: IRQ (index in order of interrupts from banks 1, 2, then 0) |
| * Bit 7: Enable FIQ generation |
| * Bits 8+: Unused |
| * |
| * An interrupt must be disabled before configuring it for FIQ generation |
| * otherwise both handlers will fire at the same time! |
| */ |
| |
| #include <linux/io.h> |
| #include <linux/slab.h> |
| #include <linux/of_address.h> |
| #include <linux/of_irq.h> |
| #include <linux/irqchip.h> |
| #include <linux/irqdomain.h> |
| |
| #include <asm/exception.h> |
| #include <asm/mach/irq.h> |
| |
| /* Put the bank and irq (32 bits) into the hwirq */ |
| #define MAKE_HWIRQ(b, n) ((b << 5) | (n)) |
| #define HWIRQ_BANK(i) (i >> 5) |
| #define HWIRQ_BIT(i) BIT(i & 0x1f) |
| |
| #define NR_IRQS_BANK0 8 |
| #define BANK0_HWIRQ_MASK 0xff |
| /* Shortcuts can't be disabled so any unknown new ones need to be masked */ |
| #define SHORTCUT1_MASK 0x00007c00 |
| #define SHORTCUT2_MASK 0x001f8000 |
| #define SHORTCUT_SHIFT 10 |
| #define BANK1_HWIRQ BIT(8) |
| #define BANK2_HWIRQ BIT(9) |
| #define BANK0_VALID_MASK (BANK0_HWIRQ_MASK | BANK1_HWIRQ | BANK2_HWIRQ \ |
| | SHORTCUT1_MASK | SHORTCUT2_MASK) |
| |
| #define REG_FIQ_CONTROL 0x0c |
| |
| #define NR_BANKS 3 |
| #define IRQS_PER_BANK 32 |
| |
| static const int reg_pending[] __initconst = { 0x00, 0x04, 0x08 }; |
| static const int reg_enable[] __initconst = { 0x18, 0x10, 0x14 }; |
| static const int reg_disable[] __initconst = { 0x24, 0x1c, 0x20 }; |
| static const int bank_irqs[] __initconst = { 8, 32, 32 }; |
| |
| static const int shortcuts[] = { |
| 7, 9, 10, 18, 19, /* Bank 1 */ |
| 21, 22, 23, 24, 25, 30 /* Bank 2 */ |
| }; |
| |
| struct armctrl_ic { |
| void __iomem *base; |
| void __iomem *pending[NR_BANKS]; |
| void __iomem *enable[NR_BANKS]; |
| void __iomem *disable[NR_BANKS]; |
| struct irq_domain *domain; |
| }; |
| |
| static struct armctrl_ic intc __read_mostly; |
| static void __exception_irq_entry bcm2835_handle_irq( |
| struct pt_regs *regs); |
| static void bcm2836_chained_handle_irq(unsigned int irq, struct irq_desc *desc); |
| |
| static void armctrl_mask_irq(struct irq_data *d) |
| { |
| writel_relaxed(HWIRQ_BIT(d->hwirq), intc.disable[HWIRQ_BANK(d->hwirq)]); |
| } |
| |
| static void armctrl_unmask_irq(struct irq_data *d) |
| { |
| writel_relaxed(HWIRQ_BIT(d->hwirq), intc.enable[HWIRQ_BANK(d->hwirq)]); |
| } |
| |
| static struct irq_chip armctrl_chip = { |
| .name = "ARMCTRL-level", |
| .irq_mask = armctrl_mask_irq, |
| .irq_unmask = armctrl_unmask_irq |
| }; |
| |
| static int armctrl_xlate(struct irq_domain *d, struct device_node *ctrlr, |
| const u32 *intspec, unsigned int intsize, |
| unsigned long *out_hwirq, unsigned int *out_type) |
| { |
| if (WARN_ON(intsize != 2)) |
| return -EINVAL; |
| |
| if (WARN_ON(intspec[0] >= NR_BANKS)) |
| return -EINVAL; |
| |
| if (WARN_ON(intspec[1] >= IRQS_PER_BANK)) |
| return -EINVAL; |
| |
| if (WARN_ON(intspec[0] == 0 && intspec[1] >= NR_IRQS_BANK0)) |
| return -EINVAL; |
| |
| *out_hwirq = MAKE_HWIRQ(intspec[0], intspec[1]); |
| *out_type = IRQ_TYPE_NONE; |
| return 0; |
| } |
| |
| static const struct irq_domain_ops armctrl_ops = { |
| .xlate = armctrl_xlate |
| }; |
| |
| static int __init armctrl_of_init(struct device_node *node, |
| struct device_node *parent, |
| bool is_2836) |
| { |
| void __iomem *base; |
| int irq, b, i; |
| |
| base = of_iomap(node, 0); |
| if (!base) |
| panic("%s: unable to map IC registers\n", |
| node->full_name); |
| |
| intc.domain = irq_domain_add_linear(node, MAKE_HWIRQ(NR_BANKS, 0), |
| &armctrl_ops, NULL); |
| if (!intc.domain) |
| panic("%s: unable to create IRQ domain\n", node->full_name); |
| |
| for (b = 0; b < NR_BANKS; b++) { |
| intc.pending[b] = base + reg_pending[b]; |
| intc.enable[b] = base + reg_enable[b]; |
| intc.disable[b] = base + reg_disable[b]; |
| |
| for (i = 0; i < bank_irqs[b]; i++) { |
| irq = irq_create_mapping(intc.domain, MAKE_HWIRQ(b, i)); |
| BUG_ON(irq <= 0); |
| irq_set_chip_and_handler(irq, &armctrl_chip, |
| handle_level_irq); |
| set_irq_flags(irq, IRQF_VALID | IRQF_PROBE); |
| } |
| } |
| |
| if (is_2836) { |
| int parent_irq = irq_of_parse_and_map(node, 0); |
| |
| if (!parent_irq) { |
| panic("%s: unable to get parent interrupt.\n", |
| node->full_name); |
| } |
| irq_set_chained_handler(parent_irq, bcm2836_chained_handle_irq); |
| } else { |
| set_handle_irq(bcm2835_handle_irq); |
| } |
| |
| return 0; |
| } |
| |
| static int __init bcm2835_armctrl_of_init(struct device_node *node, |
| struct device_node *parent) |
| { |
| return armctrl_of_init(node, parent, false); |
| } |
| |
| static int __init bcm2836_armctrl_of_init(struct device_node *node, |
| struct device_node *parent) |
| { |
| return armctrl_of_init(node, parent, true); |
| } |
| |
| |
| /* |
| * Handle each interrupt across the entire interrupt controller. This reads the |
| * status register before handling each interrupt, which is necessary given that |
| * handle_IRQ may briefly re-enable interrupts for soft IRQ handling. |
| */ |
| |
| static u32 armctrl_translate_bank(int bank) |
| { |
| u32 stat = readl_relaxed(intc.pending[bank]); |
| |
| return MAKE_HWIRQ(bank, ffs(stat) - 1); |
| } |
| |
| static u32 armctrl_translate_shortcut(int bank, u32 stat) |
| { |
| return MAKE_HWIRQ(bank, shortcuts[ffs(stat >> SHORTCUT_SHIFT) - 1]); |
| } |
| |
| static u32 get_next_armctrl_hwirq(void) |
| { |
| u32 stat = readl_relaxed(intc.pending[0]) & BANK0_VALID_MASK; |
| |
| if (stat == 0) |
| return ~0; |
| else if (stat & BANK0_HWIRQ_MASK) |
| return MAKE_HWIRQ(0, ffs(stat & BANK0_HWIRQ_MASK) - 1); |
| else if (stat & SHORTCUT1_MASK) |
| return armctrl_translate_shortcut(1, stat & SHORTCUT1_MASK); |
| else if (stat & SHORTCUT2_MASK) |
| return armctrl_translate_shortcut(2, stat & SHORTCUT2_MASK); |
| else if (stat & BANK1_HWIRQ) |
| return armctrl_translate_bank(1); |
| else if (stat & BANK2_HWIRQ) |
| return armctrl_translate_bank(2); |
| else |
| BUG(); |
| } |
| |
| static void __exception_irq_entry bcm2835_handle_irq( |
| struct pt_regs *regs) |
| { |
| u32 hwirq; |
| |
| while ((hwirq = get_next_armctrl_hwirq()) != ~0) |
| handle_IRQ(irq_linear_revmap(intc.domain, hwirq), regs); |
| } |
| |
| static void bcm2836_chained_handle_irq(unsigned int irq, struct irq_desc *desc) |
| { |
| u32 hwirq; |
| |
| while ((hwirq = get_next_armctrl_hwirq()) != ~0) |
| generic_handle_irq(irq_linear_revmap(intc.domain, hwirq)); |
| } |
| |
| IRQCHIP_DECLARE(bcm2835_armctrl_ic, "brcm,bcm2835-armctrl-ic", |
| bcm2835_armctrl_of_init); |
| IRQCHIP_DECLARE(bcm2836_armctrl_ic, "brcm,bcm2836-armctrl-ic", |
| bcm2836_armctrl_of_init); |