staging: brcm80211: Remove cruft from wlioctl.h
Signed-off-by: Brett Rudley <brudley@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
diff --git a/drivers/staging/brcm80211/include/wlioctl.h b/drivers/staging/brcm80211/include/wlioctl.h
index 81863e0..45e02e5 100644
--- a/drivers/staging/brcm80211/include/wlioctl.h
+++ b/drivers/staging/brcm80211/include/wlioctl.h
@@ -34,82 +34,8 @@
#include <packed_section_start.h>
#ifdef BRCM_FULLMAC
-/* Legacy structure to help keep backward compatible wl tool and tray app */
-#define LEGACY_WL_BSS_INFO_VERSION 107 /* older version of wl_bss_info struct */
-
-typedef struct wl_bss_info_107 {
- u32 version; /* version field */
- u32 length; /* byte length of data in this record,
- * starting at version and including IEs
- */
- struct ether_addr BSSID;
- u16 beacon_period; /* units are Kusec */
- u16 capability; /* Capability information */
- u8 SSID_len;
- u8 SSID[32];
- struct {
- uint count; /* # rates in this set */
- u8 rates[16]; /* rates in 500kbps units w/hi bit set if basic */
- } rateset; /* supported rates */
- u8 channel; /* Channel no. */
- u16 atim_window; /* units are Kusec */
- u8 dtim_period; /* DTIM period */
- s16 RSSI; /* receive signal strength (in dBm) */
- s8 phy_noise; /* noise (in dBm) */
- u32 ie_length; /* byte length of Information Elements */
- /* variable length Information Elements */
-} wl_bss_info_107_t;
-
-/*
- * Per-BSS information structure.
- */
-
-#define LEGACY2_WL_BSS_INFO_VERSION 108 /* old version of wl_bss_info struct */
-
-/* BSS info structure
- * Applications MUST CHECK ie_offset field and length field to access IEs and
- * next bss_info structure in a vector (in wl_scan_results_t)
- */
-typedef struct wl_bss_info_108 {
- u32 version; /* version field */
- u32 length; /* byte length of data in this record,
- * starting at version and including IEs
- */
- struct ether_addr BSSID;
- u16 beacon_period; /* units are Kusec */
- u16 capability; /* Capability information */
- u8 SSID_len;
- u8 SSID[32];
- struct {
- uint count; /* # rates in this set */
- u8 rates[16]; /* rates in 500kbps units w/hi bit set if basic */
- } rateset; /* supported rates */
- chanspec_t chanspec; /* chanspec for bss */
- u16 atim_window; /* units are Kusec */
- u8 dtim_period; /* DTIM period */
- s16 RSSI; /* receive signal strength (in dBm) */
- s8 phy_noise; /* noise (in dBm) */
-
- u8 n_cap; /* BSS is 802.11N Capable */
- u32 nbss_cap; /* 802.11N BSS Capabilities (based on HT_CAP_*) */
- u8 ctl_ch; /* 802.11N BSS control channel number */
- u32 reserved32[1]; /* Reserved for expansion of BSS properties */
- u8 flags; /* flags */
- u8 reserved[3]; /* Reserved for expansion of BSS properties */
- u8 basic_mcs[MCSSET_LEN]; /* 802.11N BSS required MCS set */
-
- u16 ie_offset; /* offset at which IEs start, from beginning */
- u32 ie_length; /* byte length of Information Elements */
- /* Add new fields here */
- /* variable length Information Elements */
-} wl_bss_info_108_t;
-
-#ifdef BRCM_FULLMAC
#define WL_BSS_INFO_VERSION 108 /* current ver of wl_bss_info struct */
-#else
-#define WL_BSS_INFO_VERSION 109 /* current ver of wl_bss_info struct */
-#endif
/* BSS info structure
* Applications MUST CHECK ie_offset field and length field to access IEs and
@@ -633,27 +559,6 @@
u8 activehi;
} wl_led_info_t;
-/* flags */
-#define WLC_ASSOC_REQ_IS_REASSOC 0x01 /* assoc req was actually a reassoc */
-
-/* srom read/write struct passed through ioctl */
-typedef struct {
- uint byteoff; /* byte offset */
- uint nbytes; /* number of bytes */
- u16 buf[1];
-} srom_rw_t;
-
-/* similar cis (srom or otp) struct [iovar: may not be aligned] */
-typedef struct {
- u32 source; /* cis source */
- u32 byteoff; /* byte offset */
- u32 nbytes; /* number of bytes */
- /* data follows here */
-} cis_rw_t;
-
-#define WLC_CIS_DEFAULT 0 /* built-in default */
-#define WLC_CIS_SROM 1 /* source is sprom */
-#define WLC_CIS_OTP 2 /* source is otp */
/* R_REG and W_REG struct passed through ioctl */
typedef struct {
@@ -663,102 +568,14 @@
uint band; /* band (optional) */
} rw_reg_t;
-/* Structure used by GET/SET_ATTEN ioctls - it controls power in b/g-band */
-/* PCL - Power Control Loop */
-/* current gain setting is replaced by user input */
-#define WL_ATTEN_APP_INPUT_PCL_OFF 0 /* turn off PCL, apply supplied input */
-#define WL_ATTEN_PCL_ON 1 /* turn on PCL */
-/* current gain setting is maintained */
-#define WL_ATTEN_PCL_OFF 2 /* turn off PCL. */
-typedef struct {
- u16 auto_ctrl; /* WL_ATTEN_XX */
- u16 bb; /* Baseband attenuation */
- u16 radio; /* Radio attenuation */
- u16 txctl1; /* Radio TX_CTL1 value */
-} atten_t;
-
-/* Per-AC retry parameters */
-struct wme_tx_params_s {
- u8 short_retry;
- u8 short_fallback;
- u8 long_retry;
- u8 long_fallback;
- u16 max_rate; /* In units of 512 Kbps */
-};
-
-typedef struct wme_tx_params_s wme_tx_params_t;
-
-#define WL_WME_TX_PARAMS_IO_BYTES (sizeof(wme_tx_params_t) * AC_COUNT)
-
-/* defines used by poweridx iovar - it controls power in a-band */
-/* current gain setting is maintained */
-#define WL_PWRIDX_PCL_OFF -2 /* turn off PCL. */
-#define WL_PWRIDX_PCL_ON -1 /* turn on PCL */
-#define WL_PWRIDX_LOWER_LIMIT -2 /* lower limit */
-#define WL_PWRIDX_UPPER_LIMIT 63 /* upper limit */
-/* value >= 0 causes
- * - input to be set to that value
- * - PCL to be off
- */
-
-/* Used to get specific link/ac parameters */
-typedef struct {
- int ac;
- u8 val;
- struct ether_addr ea;
-} link_val_t;
-
-#define BCM_MAC_STATUS_INDICATION (0x40010200L)
-
-typedef struct {
- u16 ver; /* version of this struct */
- u16 len; /* length in bytes of this structure */
- u16 cap; /* sta's advertised capabilities */
- u32 flags; /* flags defined below */
- u32 idle; /* time since data pkt rx'd from sta */
- struct ether_addr ea; /* Station address */
- wl_rateset_t rateset; /* rateset in use */
- u32 in; /* seconds elapsed since associated */
- u32 listen_interval_inms; /* Min Listen interval in ms for this STA */
- u32 tx_pkts; /* # of packets transmitted */
- u32 tx_failures; /* # of packets failed */
- u32 rx_ucast_pkts; /* # of unicast packets received */
- u32 rx_mcast_pkts; /* # of multicast packets received */
- u32 tx_rate; /* Rate of last successful tx frame */
- u32 rx_rate; /* Rate of last successful rx frame */
- u32 rx_decrypt_succeeds; /* # of packet decrypted successfully */
- u32 rx_decrypt_failures; /* # of packet decrypted unsuccessfully */
-} sta_info_t;
-
-#define WL_OLD_STAINFO_SIZE offsetof(sta_info_t, tx_pkts)
-
-#define WL_STA_VER 3
-
-/* Flags for sta_info_t indicating properties of STA */
-#define WL_STA_BRCM 0x1 /* Running a Broadcom driver */
-#define WL_STA_WME 0x2 /* WMM association */
-#define WL_STA_ABCAP 0x4
-#define WL_STA_AUTHE 0x8 /* Authenticated */
-#define WL_STA_ASSOC 0x10 /* Associated */
-#define WL_STA_AUTHO 0x20 /* Authorized */
-#define WL_STA_WDS 0x40 /* Wireless Distribution System */
-#define WL_STA_WDS_LINKUP 0x80 /* WDS traffic/probes flowing properly */
-#define WL_STA_PS 0x100 /* STA is in power save mode from AP's viewpoint */
-#define WL_STA_APSD_BE 0x200 /* APSD delv/trigger for AC_BE is default enabled */
-#define WL_STA_APSD_BK 0x400 /* APSD delv/trigger for AC_BK is default enabled */
-#define WL_STA_APSD_VI 0x800 /* APSD delv/trigger for AC_VI is default enabled */
-#define WL_STA_APSD_VO 0x1000 /* APSD delv/trigger for AC_VO is default enabled */
-#define WL_STA_N_CAP 0x2000 /* STA 802.11n capable */
-#define WL_STA_SCBSTATS 0x4000 /* Per STA debug stats */
-
-#define WL_WDS_LINKUP WL_STA_WDS_LINKUP /* deprecated */
-
+#ifdef BRCM_FULLMAC
/* Used to get specific STA parameters */
typedef struct {
u32 val;
struct ether_addr ea;
} scb_val_t;
+#endif /* BRCM_FULLMAC */
/* channel encoding */
typedef struct channel_info {
@@ -782,6 +599,7 @@
uint rx_ocast_good_pkt; /* unicast packets destined for others */
} get_pktcnt_t;
+#ifdef BRCM_FULLMAC
/* Linux network driver ioctl encoding */
typedef struct wl_ioctl {
uint cmd; /* common ioctl definition */
@@ -791,11 +609,8 @@
uint used; /* bytes read or written (optional) */
uint needed; /* bytes needed (optional) */
} wl_ioctl_t;
+#endif /* BRCM_FULLMAC */
-/* reference to wl_ioctl_t struct used by usermode driver */
-#define ioctl_subtype set /* subtype param */
-#define ioctl_pid used /* pid param */
-#define ioctl_status needed /* status param */
/*
* Structure for passing hardware and software
@@ -822,45 +637,11 @@
#define WL_REV_INFO_LEGACY_LENGTH 48
-#define WL_BRAND_MAX 10
-typedef struct wl_instance_info {
- uint instance;
- char brand[WL_BRAND_MAX];
-} wl_instance_info_t;
-
-/* structure to change size of tx fifo */
-typedef struct wl_txfifo_sz {
- u16 magic;
- u16 fifo;
- u16 size;
-} wl_txfifo_sz_t;
-/* magic pattern used for mismatch driver and wl */
-#define WL_TXFIFO_SZ_MAGIC 0xa5a5
-
-/* Transfer info about an IOVar from the driver */
-/* Max supported IOV name size in bytes, + 1 for nul termination */
-#define WLC_IOV_NAME_LEN 30
-typedef struct wlc_iov_trx_s {
- u8 module;
- u8 type;
- char name[WLC_IOV_NAME_LEN];
-} wlc_iov_trx_t;
-
-/* check this magic number */
-#define WLC_IOCTL_MAGIC 0x14e46c77
-
-#define PROC_ENTRY_NAME "brcm_debug"
-/* bump this number if you change the ioctl interface */
-#define WLC_IOCTL_VERSION 1
-
#ifdef BRCM_FULLMAC
-#define WLC_IOCTL_MAXLEN 8192
-#else
-#define WLC_IOCTL_MAXLEN 3072 /* max length ioctl buffer required */
-#endif
#define WLC_IOCTL_SMLEN 256 /* "small" length ioctl buffer required */
#define WLC_IOCTL_MEDLEN 1536 /* "med" length ioctl buffer required */
-#define WLC_SAMPLECOLLECT_MAXLEN 10240 /* Max Sample Collect buffer for two cores */
+#define WLC_IOCTL_MAXLEN 8192
+#endif
/* common ioctl definitions */
#define WLC_GET_MAGIC 0
@@ -1411,23 +1192,6 @@
#define WL_TX_POWER_MCS40_FIRST 28
#define WL_TX_POWER_MCS40_NUM 17
-typedef struct {
- u32 flags;
- chanspec_t chanspec; /* txpwr report for this channel */
- chanspec_t local_chanspec; /* channel on which we are associated */
- u8 local_max; /* local max according to the AP */
- u8 local_constraint; /* local constraint according to the AP */
- s8 antgain[2]; /* Ant gain for each band - from SROM */
- u8 rf_cores; /* count of RF Cores being reported */
- u8 est_Pout[4]; /* Latest tx power out estimate per RF
- * chain without adjustment
- */
- u8 est_Pout_cck; /* Latest CCK tx power out estimate */
- u8 user_limit[WL_TX_POWER_RATES_LEGACY]; /* User limit */
- u8 reg_limit[WL_TX_POWER_RATES_LEGACY]; /* Regulatory power limit */
- u8 board_limit[WL_TX_POWER_RATES_LEGACY]; /* Max power board can support (SROM) */
- u8 target[WL_TX_POWER_RATES_LEGACY]; /* Latest target power */
-} tx_power_legacy2_t;
#define WL_TX_POWER_RATES 101
#define WL_TX_POWER_CCK_FIRST 0
@@ -1860,63 +1624,6 @@
u8 retry; /* retry value */
};
-/* structure for addts arguments */
-/* For ioctls that take a list of TSPEC */
-struct tslist {
- int count; /* number of tspecs */
- struct tsinfo_arg tsinfo[1]; /* variable length array of tsinfo */
-};
-
-/* structure for addts/delts arguments */
-typedef struct tspec_arg {
- u16 version; /* see definition of TSPEC_ARG_VERSION */
- u16 length; /* length of entire structure */
- uint flag; /* bit field */
- /* TSPEC Arguments */
- struct tsinfo_arg tsinfo; /* TS Info bit field */
- u16 nom_msdu_size; /* (Nominal or fixed) MSDU Size (bytes) */
- u16 max_msdu_size; /* Maximum MSDU Size (bytes) */
- uint min_srv_interval; /* Minimum Service Interval (us) */
- uint max_srv_interval; /* Maximum Service Interval (us) */
- uint inactivity_interval; /* Inactivity Interval (us) */
- uint suspension_interval; /* Suspension Interval (us) */
- uint srv_start_time; /* Service Start Time (us) */
- uint min_data_rate; /* Minimum Data Rate (bps) */
- uint mean_data_rate; /* Mean Data Rate (bps) */
- uint peak_data_rate; /* Peak Data Rate (bps) */
- uint max_burst_size; /* Maximum Burst Size (bytes) */
- uint delay_bound; /* Delay Bound (us) */
- uint min_phy_rate; /* Minimum PHY Rate (bps) */
- u16 surplus_bw; /* Surplus Bandwidth Allowance (range 1.0 to 8.0) */
- u16 medium_time; /* Medium Time (32 us/s periods) */
- u8 dialog_token; /* dialog token */
-} tspec_arg_t;
-
-/* tspec arg for desired station */
-typedef struct tspec_per_sta_arg {
- struct ether_addr ea;
- struct tspec_arg ts;
-} tspec_per_sta_arg_t;
-
-/* structure for max bandwidth for each access category */
-typedef struct wme_max_bandwidth {
- u32 ac[AC_COUNT]; /* max bandwidth for each access category */
-} wme_max_bandwidth_t;
-
-#define WL_WME_MBW_PARAMS_IO_BYTES (sizeof(wme_max_bandwidth_t))
-
-/* current version of wl_tspec_arg_t struct */
-#define TSPEC_ARG_VERSION 2 /* current version of wl_tspec_arg_t struct */
-#define TSPEC_ARG_LENGTH 55 /* argument length from tsinfo to medium_time */
-#define TSPEC_DEFAULT_DIALOG_TOKEN 42 /* default dialog token */
-#define TSPEC_DEFAULT_SBW_FACTOR 0x3000 /* default surplus bw */
-
-/* define for flag */
-#define TSPEC_PENDING 0 /* TSPEC pending */
-#define TSPEC_ACCEPTED 1 /* TSPEC accepted */
-#define TSPEC_REJECTED 2 /* TSPEC rejected */
-#define TSPEC_UNKNOWN 3 /* TSPEC unknown */
-#define TSPEC_STATUS_MASK 7 /* TSPEC status mask */
/* Software feature flag defines used by wlfeatureflag */
#define WL_SWFL_NOHWRADIO 0x0004
@@ -1925,16 +1632,6 @@
#define WL_LIFETIME_MAX 0xFFFF /* Max value in ms */
-/*
- * Dongle pattern matching filter.
- */
-
-/* Packet filter types. Currently, only pattern matching is supported. */
-typedef enum wl_pkt_filter_type {
- WL_PKT_FILTER_TYPE_PATTERN_MATCH /* Pattern matching filter */
-} wl_pkt_filter_type_t;
-
-#define WL_PKT_FILTER_TYPE wl_pkt_filter_type_t
/* Pattern matching filter. Specifies an offset within received packets to
* start matching, the pattern to match, the size of the pattern, and a bitmask
@@ -1969,20 +1666,6 @@
u32 enable; /* Enable/disable bool */
} wl_pkt_filter_enable_t;
-/* IOVAR "pkt_filter_list" parameter. Used to retrieve a list of installed filters. */
-typedef struct wl_pkt_filter_list {
- u32 num; /* Number of installed packet filters */
- wl_pkt_filter_t filter[1]; /* Variable array of packet filters. */
-} wl_pkt_filter_list_t;
-
-#define WL_PKT_FILTER_LIST_FIXED_LEN offsetof(wl_pkt_filter_list_t, filter)
-
-/* IOVAR "pkt_filter_stats" parameter. Used to retrieve debug statistics. */
-typedef struct wl_pkt_filter_stats {
- u32 num_pkts_matched; /* # filter matches for specified filter id */
- u32 num_pkts_forwarded; /* # packets fwded from dongle to host for all filters */
- u32 num_pkts_discarded; /* # packets discarded by dongle for all filters */
-} wl_pkt_filter_stats_t;
#define WLC_RSSI_INVALID 0 /* invalid RSSI value */