| /* |
| * nosy - Snoop mode driver for TI PCILynx 1394 controllers |
| * Copyright (C) 2002-2007 Kristian Høgsberg |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software Foundation, |
| * Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. |
| */ |
| |
| #include <linux/device.h> |
| #include <linux/errno.h> |
| #include <linux/fs.h> |
| #include <linux/init.h> |
| #include <linux/interrupt.h> |
| #include <linux/io.h> |
| #include <linux/kernel.h> |
| #include <linux/kref.h> |
| #include <linux/miscdevice.h> |
| #include <linux/module.h> |
| #include <linux/mutex.h> |
| #include <linux/pci.h> |
| #include <linux/poll.h> |
| #include <linux/sched.h> /* required for linux/wait.h */ |
| #include <linux/slab.h> |
| #include <linux/spinlock.h> |
| #include <linux/time64.h> |
| #include <linux/timex.h> |
| #include <linux/uaccess.h> |
| #include <linux/wait.h> |
| #include <linux/dma-mapping.h> |
| #include <linux/atomic.h> |
| #include <asm/byteorder.h> |
| |
| #include "nosy.h" |
| #include "nosy-user.h" |
| |
| #define TCODE_PHY_PACKET 0x10 |
| #define PCI_DEVICE_ID_TI_PCILYNX 0x8000 |
| |
| static char driver_name[] = KBUILD_MODNAME; |
| |
| /* this is the physical layout of a PCL, its size is 128 bytes */ |
| struct pcl { |
| __le32 next; |
| __le32 async_error_next; |
| u32 user_data; |
| __le32 pcl_status; |
| __le32 remaining_transfer_count; |
| __le32 next_data_buffer; |
| struct { |
| __le32 control; |
| __le32 pointer; |
| } buffer[13]; |
| }; |
| |
| struct packet { |
| unsigned int length; |
| char data[0]; |
| }; |
| |
| struct packet_buffer { |
| char *data; |
| size_t capacity; |
| long total_packet_count, lost_packet_count; |
| atomic_t size; |
| struct packet *head, *tail; |
| wait_queue_head_t wait; |
| }; |
| |
| struct pcilynx { |
| struct pci_dev *pci_device; |
| __iomem char *registers; |
| |
| struct pcl *rcv_start_pcl, *rcv_pcl; |
| __le32 *rcv_buffer; |
| |
| dma_addr_t rcv_start_pcl_bus, rcv_pcl_bus, rcv_buffer_bus; |
| |
| spinlock_t client_list_lock; |
| struct list_head client_list; |
| |
| struct miscdevice misc; |
| struct list_head link; |
| struct kref kref; |
| }; |
| |
| static inline struct pcilynx * |
| lynx_get(struct pcilynx *lynx) |
| { |
| kref_get(&lynx->kref); |
| |
| return lynx; |
| } |
| |
| static void |
| lynx_release(struct kref *kref) |
| { |
| kfree(container_of(kref, struct pcilynx, kref)); |
| } |
| |
| static inline void |
| lynx_put(struct pcilynx *lynx) |
| { |
| kref_put(&lynx->kref, lynx_release); |
| } |
| |
| struct client { |
| struct pcilynx *lynx; |
| u32 tcode_mask; |
| struct packet_buffer buffer; |
| struct list_head link; |
| }; |
| |
| static DEFINE_MUTEX(card_mutex); |
| static LIST_HEAD(card_list); |
| |
| static int |
| packet_buffer_init(struct packet_buffer *buffer, size_t capacity) |
| { |
| buffer->data = kmalloc(capacity, GFP_KERNEL); |
| if (buffer->data == NULL) |
| return -ENOMEM; |
| buffer->head = (struct packet *) buffer->data; |
| buffer->tail = (struct packet *) buffer->data; |
| buffer->capacity = capacity; |
| buffer->lost_packet_count = 0; |
| atomic_set(&buffer->size, 0); |
| init_waitqueue_head(&buffer->wait); |
| |
| return 0; |
| } |
| |
| static void |
| packet_buffer_destroy(struct packet_buffer *buffer) |
| { |
| kfree(buffer->data); |
| } |
| |
| static int |
| packet_buffer_get(struct client *client, char __user *data, size_t user_length) |
| { |
| struct packet_buffer *buffer = &client->buffer; |
| size_t length; |
| char *end; |
| |
| if (wait_event_interruptible(buffer->wait, |
| atomic_read(&buffer->size) > 0) || |
| list_empty(&client->lynx->link)) |
| return -ERESTARTSYS; |
| |
| if (atomic_read(&buffer->size) == 0) |
| return -ENODEV; |
| |
| /* FIXME: Check length <= user_length. */ |
| |
| end = buffer->data + buffer->capacity; |
| length = buffer->head->length; |
| |
| if (&buffer->head->data[length] < end) { |
| if (copy_to_user(data, buffer->head->data, length)) |
| return -EFAULT; |
| buffer->head = (struct packet *) &buffer->head->data[length]; |
| } else { |
| size_t split = end - buffer->head->data; |
| |
| if (copy_to_user(data, buffer->head->data, split)) |
| return -EFAULT; |
| if (copy_to_user(data + split, buffer->data, length - split)) |
| return -EFAULT; |
| buffer->head = (struct packet *) &buffer->data[length - split]; |
| } |
| |
| /* |
| * Decrease buffer->size as the last thing, since this is what |
| * keeps the interrupt from overwriting the packet we are |
| * retrieving from the buffer. |
| */ |
| atomic_sub(sizeof(struct packet) + length, &buffer->size); |
| |
| return length; |
| } |
| |
| static void |
| packet_buffer_put(struct packet_buffer *buffer, void *data, size_t length) |
| { |
| char *end; |
| |
| buffer->total_packet_count++; |
| |
| if (buffer->capacity < |
| atomic_read(&buffer->size) + sizeof(struct packet) + length) { |
| buffer->lost_packet_count++; |
| return; |
| } |
| |
| end = buffer->data + buffer->capacity; |
| buffer->tail->length = length; |
| |
| if (&buffer->tail->data[length] < end) { |
| memcpy(buffer->tail->data, data, length); |
| buffer->tail = (struct packet *) &buffer->tail->data[length]; |
| } else { |
| size_t split = end - buffer->tail->data; |
| |
| memcpy(buffer->tail->data, data, split); |
| memcpy(buffer->data, data + split, length - split); |
| buffer->tail = (struct packet *) &buffer->data[length - split]; |
| } |
| |
| /* Finally, adjust buffer size and wake up userspace reader. */ |
| |
| atomic_add(sizeof(struct packet) + length, &buffer->size); |
| wake_up_interruptible(&buffer->wait); |
| } |
| |
| static inline void |
| reg_write(struct pcilynx *lynx, int offset, u32 data) |
| { |
| writel(data, lynx->registers + offset); |
| } |
| |
| static inline u32 |
| reg_read(struct pcilynx *lynx, int offset) |
| { |
| return readl(lynx->registers + offset); |
| } |
| |
| static inline void |
| reg_set_bits(struct pcilynx *lynx, int offset, u32 mask) |
| { |
| reg_write(lynx, offset, (reg_read(lynx, offset) | mask)); |
| } |
| |
| /* |
| * Maybe the pcl programs could be set up to just append data instead |
| * of using a whole packet. |
| */ |
| static inline void |
| run_pcl(struct pcilynx *lynx, dma_addr_t pcl_bus, |
| int dmachan) |
| { |
| reg_write(lynx, DMA0_CURRENT_PCL + dmachan * 0x20, pcl_bus); |
| reg_write(lynx, DMA0_CHAN_CTRL + dmachan * 0x20, |
| DMA_CHAN_CTRL_ENABLE | DMA_CHAN_CTRL_LINK); |
| } |
| |
| static int |
| set_phy_reg(struct pcilynx *lynx, int addr, int val) |
| { |
| if (addr > 15) { |
| dev_err(&lynx->pci_device->dev, |
| "PHY register address %d out of range\n", addr); |
| return -1; |
| } |
| if (val > 0xff) { |
| dev_err(&lynx->pci_device->dev, |
| "PHY register value %d out of range\n", val); |
| return -1; |
| } |
| reg_write(lynx, LINK_PHY, LINK_PHY_WRITE | |
| LINK_PHY_ADDR(addr) | LINK_PHY_WDATA(val)); |
| |
| return 0; |
| } |
| |
| static int |
| nosy_open(struct inode *inode, struct file *file) |
| { |
| int minor = iminor(inode); |
| struct client *client; |
| struct pcilynx *tmp, *lynx = NULL; |
| |
| mutex_lock(&card_mutex); |
| list_for_each_entry(tmp, &card_list, link) |
| if (tmp->misc.minor == minor) { |
| lynx = lynx_get(tmp); |
| break; |
| } |
| mutex_unlock(&card_mutex); |
| if (lynx == NULL) |
| return -ENODEV; |
| |
| client = kmalloc(sizeof *client, GFP_KERNEL); |
| if (client == NULL) |
| goto fail; |
| |
| client->tcode_mask = ~0; |
| client->lynx = lynx; |
| INIT_LIST_HEAD(&client->link); |
| |
| if (packet_buffer_init(&client->buffer, 128 * 1024) < 0) |
| goto fail; |
| |
| file->private_data = client; |
| |
| return nonseekable_open(inode, file); |
| fail: |
| kfree(client); |
| lynx_put(lynx); |
| |
| return -ENOMEM; |
| } |
| |
| static int |
| nosy_release(struct inode *inode, struct file *file) |
| { |
| struct client *client = file->private_data; |
| struct pcilynx *lynx = client->lynx; |
| |
| spin_lock_irq(&lynx->client_list_lock); |
| list_del_init(&client->link); |
| spin_unlock_irq(&lynx->client_list_lock); |
| |
| packet_buffer_destroy(&client->buffer); |
| kfree(client); |
| lynx_put(lynx); |
| |
| return 0; |
| } |
| |
| static unsigned int |
| nosy_poll(struct file *file, poll_table *pt) |
| { |
| struct client *client = file->private_data; |
| unsigned int ret = 0; |
| |
| poll_wait(file, &client->buffer.wait, pt); |
| |
| if (atomic_read(&client->buffer.size) > 0) |
| ret = POLLIN | POLLRDNORM; |
| |
| if (list_empty(&client->lynx->link)) |
| ret |= POLLHUP; |
| |
| return ret; |
| } |
| |
| static ssize_t |
| nosy_read(struct file *file, char __user *buffer, size_t count, loff_t *offset) |
| { |
| struct client *client = file->private_data; |
| |
| return packet_buffer_get(client, buffer, count); |
| } |
| |
| static long |
| nosy_ioctl(struct file *file, unsigned int cmd, unsigned long arg) |
| { |
| struct client *client = file->private_data; |
| spinlock_t *client_list_lock = &client->lynx->client_list_lock; |
| struct nosy_stats stats; |
| |
| switch (cmd) { |
| case NOSY_IOC_GET_STATS: |
| spin_lock_irq(client_list_lock); |
| stats.total_packet_count = client->buffer.total_packet_count; |
| stats.lost_packet_count = client->buffer.lost_packet_count; |
| spin_unlock_irq(client_list_lock); |
| |
| if (copy_to_user((void __user *) arg, &stats, sizeof stats)) |
| return -EFAULT; |
| else |
| return 0; |
| |
| case NOSY_IOC_START: |
| spin_lock_irq(client_list_lock); |
| list_add_tail(&client->link, &client->lynx->client_list); |
| spin_unlock_irq(client_list_lock); |
| |
| return 0; |
| |
| case NOSY_IOC_STOP: |
| spin_lock_irq(client_list_lock); |
| list_del_init(&client->link); |
| spin_unlock_irq(client_list_lock); |
| |
| return 0; |
| |
| case NOSY_IOC_FILTER: |
| spin_lock_irq(client_list_lock); |
| client->tcode_mask = arg; |
| spin_unlock_irq(client_list_lock); |
| |
| return 0; |
| |
| default: |
| return -EINVAL; |
| /* Flush buffer, configure filter. */ |
| } |
| } |
| |
| static const struct file_operations nosy_ops = { |
| .owner = THIS_MODULE, |
| .read = nosy_read, |
| .unlocked_ioctl = nosy_ioctl, |
| .poll = nosy_poll, |
| .open = nosy_open, |
| .release = nosy_release, |
| }; |
| |
| #define PHY_PACKET_SIZE 12 /* 1 payload, 1 inverse, 1 ack = 3 quadlets */ |
| |
| static void |
| packet_irq_handler(struct pcilynx *lynx) |
| { |
| struct client *client; |
| u32 tcode_mask, tcode, timestamp; |
| size_t length; |
| struct timespec64 ts64; |
| |
| /* FIXME: Also report rcv_speed. */ |
| |
| length = __le32_to_cpu(lynx->rcv_pcl->pcl_status) & 0x00001fff; |
| tcode = __le32_to_cpu(lynx->rcv_buffer[1]) >> 4 & 0xf; |
| |
| ktime_get_real_ts64(&ts64); |
| timestamp = ts64.tv_nsec / NSEC_PER_USEC; |
| lynx->rcv_buffer[0] = (__force __le32)timestamp; |
| |
| if (length == PHY_PACKET_SIZE) |
| tcode_mask = 1 << TCODE_PHY_PACKET; |
| else |
| tcode_mask = 1 << tcode; |
| |
| spin_lock(&lynx->client_list_lock); |
| |
| list_for_each_entry(client, &lynx->client_list, link) |
| if (client->tcode_mask & tcode_mask) |
| packet_buffer_put(&client->buffer, |
| lynx->rcv_buffer, length + 4); |
| |
| spin_unlock(&lynx->client_list_lock); |
| } |
| |
| static void |
| bus_reset_irq_handler(struct pcilynx *lynx) |
| { |
| struct client *client; |
| struct timespec64 ts64; |
| u32 timestamp; |
| |
| ktime_get_real_ts64(&ts64); |
| timestamp = ts64.tv_nsec / NSEC_PER_USEC; |
| |
| spin_lock(&lynx->client_list_lock); |
| |
| list_for_each_entry(client, &lynx->client_list, link) |
| packet_buffer_put(&client->buffer, ×tamp, 4); |
| |
| spin_unlock(&lynx->client_list_lock); |
| } |
| |
| static irqreturn_t |
| irq_handler(int irq, void *device) |
| { |
| struct pcilynx *lynx = device; |
| u32 pci_int_status; |
| |
| pci_int_status = reg_read(lynx, PCI_INT_STATUS); |
| |
| if (pci_int_status == ~0) |
| /* Card was ejected. */ |
| return IRQ_NONE; |
| |
| if ((pci_int_status & PCI_INT_INT_PEND) == 0) |
| /* Not our interrupt, bail out quickly. */ |
| return IRQ_NONE; |
| |
| if ((pci_int_status & PCI_INT_P1394_INT) != 0) { |
| u32 link_int_status; |
| |
| link_int_status = reg_read(lynx, LINK_INT_STATUS); |
| reg_write(lynx, LINK_INT_STATUS, link_int_status); |
| |
| if ((link_int_status & LINK_INT_PHY_BUSRESET) > 0) |
| bus_reset_irq_handler(lynx); |
| } |
| |
| /* Clear the PCI_INT_STATUS register only after clearing the |
| * LINK_INT_STATUS register; otherwise the PCI_INT_P1394 will |
| * be set again immediately. */ |
| |
| reg_write(lynx, PCI_INT_STATUS, pci_int_status); |
| |
| if ((pci_int_status & PCI_INT_DMA0_HLT) > 0) { |
| packet_irq_handler(lynx); |
| run_pcl(lynx, lynx->rcv_start_pcl_bus, 0); |
| } |
| |
| return IRQ_HANDLED; |
| } |
| |
| static void |
| remove_card(struct pci_dev *dev) |
| { |
| struct pcilynx *lynx = pci_get_drvdata(dev); |
| struct client *client; |
| |
| mutex_lock(&card_mutex); |
| list_del_init(&lynx->link); |
| misc_deregister(&lynx->misc); |
| mutex_unlock(&card_mutex); |
| |
| reg_write(lynx, PCI_INT_ENABLE, 0); |
| free_irq(lynx->pci_device->irq, lynx); |
| |
| spin_lock_irq(&lynx->client_list_lock); |
| list_for_each_entry(client, &lynx->client_list, link) |
| wake_up_interruptible(&client->buffer.wait); |
| spin_unlock_irq(&lynx->client_list_lock); |
| |
| pci_free_consistent(lynx->pci_device, sizeof(struct pcl), |
| lynx->rcv_start_pcl, lynx->rcv_start_pcl_bus); |
| pci_free_consistent(lynx->pci_device, sizeof(struct pcl), |
| lynx->rcv_pcl, lynx->rcv_pcl_bus); |
| pci_free_consistent(lynx->pci_device, PAGE_SIZE, |
| lynx->rcv_buffer, lynx->rcv_buffer_bus); |
| |
| iounmap(lynx->registers); |
| pci_disable_device(dev); |
| lynx_put(lynx); |
| } |
| |
| #define RCV_BUFFER_SIZE (16 * 1024) |
| |
| static int |
| add_card(struct pci_dev *dev, const struct pci_device_id *unused) |
| { |
| struct pcilynx *lynx; |
| u32 p, end; |
| int ret, i; |
| |
| if (pci_set_dma_mask(dev, DMA_BIT_MASK(32))) { |
| dev_err(&dev->dev, |
| "DMA address limits not supported for PCILynx hardware\n"); |
| return -ENXIO; |
| } |
| if (pci_enable_device(dev)) { |
| dev_err(&dev->dev, "Failed to enable PCILynx hardware\n"); |
| return -ENXIO; |
| } |
| pci_set_master(dev); |
| |
| lynx = kzalloc(sizeof *lynx, GFP_KERNEL); |
| if (lynx == NULL) { |
| dev_err(&dev->dev, "Failed to allocate control structure\n"); |
| ret = -ENOMEM; |
| goto fail_disable; |
| } |
| lynx->pci_device = dev; |
| pci_set_drvdata(dev, lynx); |
| |
| spin_lock_init(&lynx->client_list_lock); |
| INIT_LIST_HEAD(&lynx->client_list); |
| kref_init(&lynx->kref); |
| |
| lynx->registers = ioremap_nocache(pci_resource_start(dev, 0), |
| PCILYNX_MAX_REGISTER); |
| if (lynx->registers == NULL) { |
| dev_err(&dev->dev, "Failed to map registers\n"); |
| ret = -ENOMEM; |
| goto fail_deallocate_lynx; |
| } |
| |
| lynx->rcv_start_pcl = pci_alloc_consistent(lynx->pci_device, |
| sizeof(struct pcl), &lynx->rcv_start_pcl_bus); |
| lynx->rcv_pcl = pci_alloc_consistent(lynx->pci_device, |
| sizeof(struct pcl), &lynx->rcv_pcl_bus); |
| lynx->rcv_buffer = pci_alloc_consistent(lynx->pci_device, |
| RCV_BUFFER_SIZE, &lynx->rcv_buffer_bus); |
| if (lynx->rcv_start_pcl == NULL || |
| lynx->rcv_pcl == NULL || |
| lynx->rcv_buffer == NULL) { |
| dev_err(&dev->dev, "Failed to allocate receive buffer\n"); |
| ret = -ENOMEM; |
| goto fail_deallocate_buffers; |
| } |
| lynx->rcv_start_pcl->next = cpu_to_le32(lynx->rcv_pcl_bus); |
| lynx->rcv_pcl->next = cpu_to_le32(PCL_NEXT_INVALID); |
| lynx->rcv_pcl->async_error_next = cpu_to_le32(PCL_NEXT_INVALID); |
| |
| lynx->rcv_pcl->buffer[0].control = |
| cpu_to_le32(PCL_CMD_RCV | PCL_BIGENDIAN | 2044); |
| lynx->rcv_pcl->buffer[0].pointer = |
| cpu_to_le32(lynx->rcv_buffer_bus + 4); |
| p = lynx->rcv_buffer_bus + 2048; |
| end = lynx->rcv_buffer_bus + RCV_BUFFER_SIZE; |
| for (i = 1; p < end; i++, p += 2048) { |
| lynx->rcv_pcl->buffer[i].control = |
| cpu_to_le32(PCL_CMD_RCV | PCL_BIGENDIAN | 2048); |
| lynx->rcv_pcl->buffer[i].pointer = cpu_to_le32(p); |
| } |
| lynx->rcv_pcl->buffer[i - 1].control |= cpu_to_le32(PCL_LAST_BUFF); |
| |
| reg_set_bits(lynx, MISC_CONTROL, MISC_CONTROL_SWRESET); |
| /* Fix buggy cards with autoboot pin not tied low: */ |
| reg_write(lynx, DMA0_CHAN_CTRL, 0); |
| reg_write(lynx, DMA_GLOBAL_REGISTER, 0x00 << 24); |
| |
| #if 0 |
| /* now, looking for PHY register set */ |
| if ((get_phy_reg(lynx, 2) & 0xe0) == 0xe0) { |
| lynx->phyic.reg_1394a = 1; |
| PRINT(KERN_INFO, lynx->id, |
| "found 1394a conform PHY (using extended register set)"); |
| lynx->phyic.vendor = get_phy_vendorid(lynx); |
| lynx->phyic.product = get_phy_productid(lynx); |
| } else { |
| lynx->phyic.reg_1394a = 0; |
| PRINT(KERN_INFO, lynx->id, "found old 1394 PHY"); |
| } |
| #endif |
| |
| /* Setup the general receive FIFO max size. */ |
| reg_write(lynx, FIFO_SIZES, 255); |
| |
| reg_set_bits(lynx, PCI_INT_ENABLE, PCI_INT_DMA_ALL); |
| |
| reg_write(lynx, LINK_INT_ENABLE, |
| LINK_INT_PHY_TIME_OUT | LINK_INT_PHY_REG_RCVD | |
| LINK_INT_PHY_BUSRESET | LINK_INT_IT_STUCK | |
| LINK_INT_AT_STUCK | LINK_INT_SNTRJ | |
| LINK_INT_TC_ERR | LINK_INT_GRF_OVER_FLOW | |
| LINK_INT_ITF_UNDER_FLOW | LINK_INT_ATF_UNDER_FLOW); |
| |
| /* Disable the L flag in self ID packets. */ |
| set_phy_reg(lynx, 4, 0); |
| |
| /* Put this baby into snoop mode */ |
| reg_set_bits(lynx, LINK_CONTROL, LINK_CONTROL_SNOOP_ENABLE); |
| |
| run_pcl(lynx, lynx->rcv_start_pcl_bus, 0); |
| |
| if (request_irq(dev->irq, irq_handler, IRQF_SHARED, |
| driver_name, lynx)) { |
| dev_err(&dev->dev, |
| "Failed to allocate shared interrupt %d\n", dev->irq); |
| ret = -EIO; |
| goto fail_deallocate_buffers; |
| } |
| |
| lynx->misc.parent = &dev->dev; |
| lynx->misc.minor = MISC_DYNAMIC_MINOR; |
| lynx->misc.name = "nosy"; |
| lynx->misc.fops = &nosy_ops; |
| |
| mutex_lock(&card_mutex); |
| ret = misc_register(&lynx->misc); |
| if (ret) { |
| dev_err(&dev->dev, "Failed to register misc char device\n"); |
| mutex_unlock(&card_mutex); |
| goto fail_free_irq; |
| } |
| list_add_tail(&lynx->link, &card_list); |
| mutex_unlock(&card_mutex); |
| |
| dev_info(&dev->dev, |
| "Initialized PCILynx IEEE1394 card, irq=%d\n", dev->irq); |
| |
| return 0; |
| |
| fail_free_irq: |
| reg_write(lynx, PCI_INT_ENABLE, 0); |
| free_irq(lynx->pci_device->irq, lynx); |
| |
| fail_deallocate_buffers: |
| if (lynx->rcv_start_pcl) |
| pci_free_consistent(lynx->pci_device, sizeof(struct pcl), |
| lynx->rcv_start_pcl, lynx->rcv_start_pcl_bus); |
| if (lynx->rcv_pcl) |
| pci_free_consistent(lynx->pci_device, sizeof(struct pcl), |
| lynx->rcv_pcl, lynx->rcv_pcl_bus); |
| if (lynx->rcv_buffer) |
| pci_free_consistent(lynx->pci_device, PAGE_SIZE, |
| lynx->rcv_buffer, lynx->rcv_buffer_bus); |
| iounmap(lynx->registers); |
| |
| fail_deallocate_lynx: |
| kfree(lynx); |
| |
| fail_disable: |
| pci_disable_device(dev); |
| |
| return ret; |
| } |
| |
| static struct pci_device_id pci_table[] = { |
| { |
| .vendor = PCI_VENDOR_ID_TI, |
| .device = PCI_DEVICE_ID_TI_PCILYNX, |
| .subvendor = PCI_ANY_ID, |
| .subdevice = PCI_ANY_ID, |
| }, |
| { } /* Terminating entry */ |
| }; |
| |
| MODULE_DEVICE_TABLE(pci, pci_table); |
| |
| static struct pci_driver lynx_pci_driver = { |
| .name = driver_name, |
| .id_table = pci_table, |
| .probe = add_card, |
| .remove = remove_card, |
| }; |
| |
| module_pci_driver(lynx_pci_driver); |
| |
| MODULE_AUTHOR("Kristian Hoegsberg"); |
| MODULE_DESCRIPTION("Snoop mode driver for TI pcilynx 1394 controllers"); |
| MODULE_LICENSE("GPL"); |