ARM: pxa: Rename Colibri evalboard
Rename colibri-pxa270-evalboard to colibri-evalboard as this board is used with
all Colibri modules.
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Acked-by: Daniel Mack <daniel@caiaq.de>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig
index 4c31e3d..1df6db6 100644
--- a/arch/arm/mach-pxa/Kconfig
+++ b/arch/arm/mach-pxa/Kconfig
@@ -253,7 +253,7 @@
select PXA3xx
select CPU_PXA320
-config MACH_COLIBRI_PXA270_EVALBOARD
+config MACH_COLIBRI_EVALBOARD
bool "Toradex Colibri Evaluation Carrier Board support"
depends on MACH_COLIBRI || MACH_COLIBRI300 || MACH_COLIBRI320
diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile
index 26e4c87..cc39d17 100644
--- a/arch/arm/mach-pxa/Makefile
+++ b/arch/arm/mach-pxa/Makefile
@@ -62,7 +62,7 @@
obj-$(CONFIG_MACH_PCM027) += pcm027.o
obj-$(CONFIG_MACH_PCM990_BASEBOARD) += pcm990-baseboard.o
obj-$(CONFIG_MACH_COLIBRI) += colibri-pxa270.o
-obj-$(CONFIG_MACH_COLIBRI_PXA270_EVALBOARD) += colibri-pxa270-evalboard.o
+obj-$(CONFIG_MACH_COLIBRI_EVALBOARD) += colibri-evalboard.o
obj-$(CONFIG_MACH_COLIBRI_PXA270_INCOME) += colibri-pxa270-income.o
obj-$(CONFIG_MACH_COLIBRI300) += colibri-pxa3xx.o colibri-pxa300.o
obj-$(CONFIG_MACH_COLIBRI320) += colibri-pxa3xx.o colibri-pxa320.o
diff --git a/arch/arm/mach-pxa/colibri-pxa270-evalboard.c b/arch/arm/mach-pxa/colibri-evalboard.c
similarity index 65%
rename from arch/arm/mach-pxa/colibri-pxa270-evalboard.c
rename to arch/arm/mach-pxa/colibri-evalboard.c
index 7f27aec..6b2c800 100644
--- a/arch/arm/mach-pxa/colibri-pxa270-evalboard.c
+++ b/arch/arm/mach-pxa/colibri-evalboard.c
@@ -1,7 +1,7 @@
/*
- * linux/arch/arm/mach-pxa/colibri-pxa270-evalboard.c
+ * linux/arch/arm/mach-pxa/colibri-evalboard.c
*
- * Support for Toradex PXA270 based Colibri Evaluation Carrier Board
+ * Support for Toradex Colibri Evaluation Carrier Board
* Daniel Mack <daniel@caiaq.de>
* Marek Vasut <marek.vasut@gmail.com>
*
@@ -36,86 +36,86 @@
* SD/MMC card controller
******************************************************************************/
#if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE)
-static struct pxamci_platform_data colibri_pxa270_mci_platform_data = {
+static struct pxamci_platform_data colibri_mci_platform_data = {
.ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
.gpio_power = -1,
.gpio_card_ro = -1,
.detect_delay_ms = 200,
};
-static void __init colibri_pxa270_mmc_init(void)
+static void __init colibri_mmc_init(void)
{
if (machine_is_colibri()) /* PXA270 Colibri */
- colibri_pxa270_mci_platform_data.gpio_card_detect =
+ colibri_mci_platform_data.gpio_card_detect =
GPIO0_COLIBRI_PXA270_SD_DETECT;
if (machine_is_colibri300()) /* PXA300 Colibri */
- colibri_pxa270_mci_platform_data.gpio_card_detect =
+ colibri_mci_platform_data.gpio_card_detect =
GPIO39_COLIBRI_PXA300_SD_DETECT;
else /* PXA320 Colibri */
- colibri_pxa270_mci_platform_data.gpio_card_detect =
+ colibri_mci_platform_data.gpio_card_detect =
GPIO28_COLIBRI_PXA320_SD_DETECT;
- pxa_set_mci_info(&colibri_pxa270_mci_platform_data);
+ pxa_set_mci_info(&colibri_mci_platform_data);
}
#else
-static inline void colibri_pxa270_mmc_init(void) {}
+static inline void colibri_mmc_init(void) {}
#endif
/******************************************************************************
* USB Host
******************************************************************************/
#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
-static int colibri_pxa270_ohci_init(struct device *dev)
+static int colibri_ohci_init(struct device *dev)
{
UP2OCR = UP2OCR_HXS | UP2OCR_HXOE | UP2OCR_DPPDE | UP2OCR_DMPDE;
return 0;
}
-static struct pxaohci_platform_data colibri_pxa270_ohci_info = {
+static struct pxaohci_platform_data colibri_ohci_info = {
.port_mode = PMM_PERPORT_MODE,
.flags = ENABLE_PORT1 |
POWER_CONTROL_LOW | POWER_SENSE_LOW,
- .init = colibri_pxa270_ohci_init,
+ .init = colibri_ohci_init,
};
-static void __init colibri_pxa270_uhc_init(void)
+static void __init colibri_uhc_init(void)
{
/* Colibri PXA270 has two usb ports, TBA for 320 */
if (machine_is_colibri())
- colibri_pxa270_ohci_info.flags |= ENABLE_PORT2;
+ colibri_ohci_info.flags |= ENABLE_PORT2;
- pxa_set_ohci_info(&colibri_pxa270_ohci_info);
+ pxa_set_ohci_info(&colibri_ohci_info);
}
#else
-static inline void colibri_pxa270_uhc_init(void) {}
+static inline void colibri_uhc_init(void) {}
#endif
/******************************************************************************
* I2C RTC
******************************************************************************/
#if defined(CONFIG_RTC_DRV_DS1307) || defined(CONFIG_RTC_DRV_DS1307_MODULE)
-static struct i2c_board_info __initdata colibri_pxa270_i2c_devs[] = {
+static struct i2c_board_info __initdata colibri_i2c_devs[] = {
{
I2C_BOARD_INFO("m41t00", 0x68),
},
};
-static void __init colibri_pxa270_rtc_init(void)
+static void __init colibri_rtc_init(void)
{
pxa_set_i2c_info(NULL);
- i2c_register_board_info(0, ARRAY_AND_SIZE(colibri_pxa270_i2c_devs));
+ i2c_register_board_info(0, ARRAY_AND_SIZE(colibri_i2c_devs));
}
#else
-static inline void colibri_pxa270_rtc_init(void) {}
+static inline void colibri_rtc_init(void) {}
#endif
-void __init colibri_pxa270_evalboard_init(void)
+void __init colibri_evalboard_init(void)
{
pxa_set_ffuart_info(NULL);
pxa_set_btuart_info(NULL);
pxa_set_stuart_info(NULL);
- colibri_pxa270_mmc_init();
- colibri_pxa270_uhc_init();
- colibri_pxa270_rtc_init();
+ colibri_mmc_init();
+ colibri_uhc_init();
+ colibri_rtc_init();
}
diff --git a/arch/arm/mach-pxa/colibri-pxa270.c b/arch/arm/mach-pxa/colibri-pxa270.c
index eecbb8b..6fc5d32 100644
--- a/arch/arm/mach-pxa/colibri-pxa270.c
+++ b/arch/arm/mach-pxa/colibri-pxa270.c
@@ -35,7 +35,7 @@
/******************************************************************************
* Evaluation board MFP
******************************************************************************/
-#ifdef CONFIG_MACH_COLIBRI_PXA270_EVALBOARD
+#ifdef CONFIG_MACH_COLIBRI_EVALBOARD
static mfp_cfg_t colibri_pxa270_evalboard_pin_config[] __initdata = {
/* MMC */
GPIO32_MMC_CLK,
@@ -281,10 +281,10 @@
colibri_pxa270_tsc_init();
switch (colibri_pxa270_baseboard) {
- case COLIBRI_PXA270_EVALBOARD:
+ case COLIBRI_EVALBOARD:
pxa2xx_mfp_config(ARRAY_AND_SIZE(
colibri_pxa270_evalboard_pin_config));
- colibri_pxa270_evalboard_init();
+ colibri_evalboard_init();
break;
case COLIBRI_PXA270_INCOME:
pxa2xx_mfp_config(ARRAY_AND_SIZE(income_pin_config));
diff --git a/arch/arm/mach-pxa/colibri-pxa300.c b/arch/arm/mach-pxa/colibri-pxa300.c
index 9b8d72d..b5bb248 100644
--- a/arch/arm/mach-pxa/colibri-pxa300.c
+++ b/arch/arm/mach-pxa/colibri-pxa300.c
@@ -32,7 +32,7 @@
#include "devices.h"
-#ifdef CONFIG_MACH_COLIBRI_PXA270_EVALBOARD
+#ifdef CONFIG_MACH_COLIBRI_EVALBOARD
static mfp_cfg_t colibri_pxa300_evalboard_pin_config[] __initdata = {
/* MMC */
GPIO7_MMC1_CLK,
@@ -173,7 +173,7 @@
/* Evalboard init */
pxa3xx_mfp_config(ARRAY_AND_SIZE(colibri_pxa300_evalboard_pin_config));
- colibri_pxa270_evalboard_init();
+ colibri_evalboard_init();
}
MACHINE_START(COLIBRI300, "Toradex Colibri PXA300")
diff --git a/arch/arm/mach-pxa/colibri-pxa320.c b/arch/arm/mach-pxa/colibri-pxa320.c
index 0d8faf8..3d2c944 100644
--- a/arch/arm/mach-pxa/colibri-pxa320.c
+++ b/arch/arm/mach-pxa/colibri-pxa320.c
@@ -35,7 +35,7 @@
#include "generic.h"
#include "devices.h"
-#ifdef CONFIG_MACH_COLIBRI_PXA270_EVALBOARD
+#ifdef CONFIG_MACH_COLIBRI_EVALBOARD
static mfp_cfg_t colibri_pxa320_evalboard_pin_config[] __initdata = {
/* MMC */
GPIO22_MMC1_CLK,
@@ -229,7 +229,7 @@
/* Evalboard init */
pxa3xx_mfp_config(ARRAY_AND_SIZE(colibri_pxa320_evalboard_pin_config));
- colibri_pxa270_evalboard_init();
+ colibri_evalboard_init();
}
MACHINE_START(COLIBRI320, "Toradex Colibri PXA320")
diff --git a/arch/arm/mach-pxa/include/mach/colibri.h b/arch/arm/mach-pxa/include/mach/colibri.h
index 63a948a..388a96f 100644
--- a/arch/arm/mach-pxa/include/mach/colibri.h
+++ b/arch/arm/mach-pxa/include/mach/colibri.h
@@ -9,14 +9,14 @@
*/
enum {
- COLIBRI_PXA270_EVALBOARD = 0,
+ COLIBRI_EVALBOARD = 0,
COLIBRI_PXA270_INCOME,
};
-#if defined(CONFIG_MACH_COLIBRI_PXA270_EVALBOARD)
-extern void colibri_pxa270_evalboard_init(void);
+#if defined(CONFIG_MACH_COLIBRI_EVALBOARD)
+extern void colibri_evalboard_init(void);
#else
-static inline void colibri_pxa270_evalboard_init(void) {}
+static inline void colibri_evalboard_init(void) {}
#endif
#if defined(CONFIG_MACH_COLIBRI_PXA270_INCOME)